summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHaavard Skinnemoen <haavard.skinnemoen@atmel.com>2008-09-01 16:21:22 +0200
committerAnatolij Gustschin <agust@denx.de>2008-10-27 09:53:58 +0100
commit6b59e03e0237a40a2305ea385defdfd92000978b (patch)
tree70f3078e9568171678634959995355a198907806
parent6f93d2b8fca504200a5758f7c6dd2d6852900765 (diff)
downloadu-boot-imx-6b59e03e0237a40a2305ea385defdfd92000978b.zip
u-boot-imx-6b59e03e0237a40a2305ea385defdfd92000978b.tar.gz
u-boot-imx-6b59e03e0237a40a2305ea385defdfd92000978b.tar.bz2
lcd: Let the board code show board-specific info
The information displayed when CONFIG_LCD_INFO is set is inherently board-specific, so it should be done by the board code. The current code dealing with this only handles two cases, and is already a horrible mess of #ifdeffery. Yes, this duplicates some code, but it also allows boards to print more board-specific information; this used to be very difficult. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
-rw-r--r--board/atmel/at91cap9adk/at91cap9adk.c29
-rw-r--r--board/atmel/at91sam9261ek/at91sam9261ek.c29
-rw-r--r--board/atmel/at91sam9263ek/at91sam9263ek.c29
-rw-r--r--board/atmel/at91sam9rlek/at91sam9rlek.c29
-rw-r--r--board/lwmon/lwmon.c29
-rw-r--r--board/tqc/tqm8xx/tqm8xx.c26
-rw-r--r--common/lcd.c84
-rw-r--r--include/lcd.h2
8 files changed, 178 insertions, 79 deletions
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index 544c932..a1a9238 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -326,6 +326,35 @@ static void at91cap9_lcd_hw_init(void)
gd->fb_base = 0;
}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf ("%s\n", U_BOOT_VERSION);
+ lcd_printf ("(C) 2008 ATMEL Corp\n");
+ lcd_printf ("at91support@atmel.com\n");
+ lcd_printf ("%s CPU at %s MHz\n",
+ AT91_CPU_NAME,
+ strmhz(temp, AT91_MAIN_CLOCK));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
#endif
int board_init(void)
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 76f56d6..70f1db9 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -209,6 +209,35 @@ static void at91sam9261ek_lcd_hw_init(void)
gd->fb_base = AT91SAM9261_SRAM_BASE;
}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf ("%s\n", U_BOOT_VERSION);
+ lcd_printf ("(C) 2008 ATMEL Corp\n");
+ lcd_printf ("at91support@atmel.com\n");
+ lcd_printf ("%s CPU at %s MHz\n",
+ AT91_CPU_NAME,
+ strmhz(temp, AT91_MAIN_CLOCK));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
#endif
int board_init(void)
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index dd513b9..63f95e7 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -260,6 +260,35 @@ static void at91sam9263ek_lcd_hw_init(void)
gd->fb_base = AT91SAM9263_SRAM0_BASE;
}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf ("%s\n", U_BOOT_VERSION);
+ lcd_printf ("(C) 2008 ATMEL Corp\n");
+ lcd_printf ("at91support@atmel.com\n");
+ lcd_printf ("%s CPU at %s MHz\n",
+ AT91_CPU_NAME,
+ strmhz(temp, AT91_MAIN_CLOCK));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
#endif
int board_init(void)
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index 7bf1f43..37e371f 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -181,6 +181,35 @@ static void at91sam9rlek_lcd_hw_init(void)
gd->fb_base = 0;
}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf ("%s\n", U_BOOT_VERSION);
+ lcd_printf ("(C) 2008 ATMEL Corp\n");
+ lcd_printf ("at91support@atmel.com\n");
+ lcd_printf ("%s CPU at %s MHz\n",
+ AT91_CPU_NAME,
+ strmhz(temp, AT91_MAIN_CLOCK));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
#endif
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index aadd254..9e57246 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -759,6 +759,35 @@ static uchar *key_match (uchar *kbd_data)
}
#endif /* CONFIG_PREBOOT */
+#ifdef CONFIG_LCD_INFO
+#include <lcd.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ char temp[32];
+
+ lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, __DATE__, __TIME__);
+ lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
+ lcd_printf (" Wolfgang DENK, wd@denx.de\n");
+#ifdef CONFIG_LCD_INFO_BELOW_LOGO
+ lcd_printf ("MPC823 CPU at %s MHz\n",
+ strmhz(temp, gd->cpu_clk));
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
+ info, strlen(info));
+ lcd_printf (" %ld MB RAM, %ld MB Flash\n",
+ gd->ram_size >> 20,
+ gd->bd->bi_flashsize >> 20 );
+#else
+ /* leave one blank line */
+ lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n",
+ strmhz(temp, gd->cpu_clk),
+ gd->ram_size >> 20,
+ gd->bd->bi_flashsize >> 20 );
+#endif /* CONFIG_LCD_INFO_BELOW_LOGO */
+}
+#endif /* CONFIG_LCD_INFO */
+
/*---------------Board Special Commands: PIC read/write ---------------*/
#if defined(CONFIG_CMD_BSP)
diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c
index 9a0f3a0..928afed 100644
--- a/board/tqc/tqm8xx/tqm8xx.c
+++ b/board/tqc/tqm8xx/tqm8xx.c
@@ -568,6 +568,32 @@ void ide_led (uchar led, uchar status)
}
# endif
+#ifdef CONFIG_LCD_INFO
+#include <lcd.h>
+
+void lcd_show_board_info(void)
+{
+ lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, __DATE__, __TIME__);
+ lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
+ lcd_printf (" Wolfgang DENK, wd@denx.de\n");
+#ifdef CONFIG_LCD_INFO_BELOW_LOGO
+ lcd_printf ("MPC823 CPU at %s MHz\n",
+ strmhz(temp, gd->cpu_clk));
+ lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
+ info, strlen(info));
+ lcd_printf (" %ld MB RAM, %ld MB Flash\n",
+ gd->ram_size >> 20,
+ gd->bd->bi_flashsize >> 20 );
+#else
+ /* leave one blank line */
+ lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n",
+ strmhz(temp, gd->cpu_clk),
+ gd->ram_size >> 20,
+ gd->bd->bi_flashsize >> 20 );
+#endif /* CONFIG_LCD_INFO_BELOW_LOGO */
+}
+#endif /* CONFIG_LCD_INFO */
+
/* ---------------------------------------------------------------------------- */
/* TK885D specific initializaion */
/* ---------------------------------------------------------------------------- */
diff --git a/common/lcd.c b/common/lcd.c
index 813c8d8..31bb190 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -52,7 +52,6 @@
#if defined(CONFIG_ATMEL_LCD)
#include <atmel_lcdc.h>
-#include <nand.h>
#endif
/************************************************************************/
@@ -762,15 +761,6 @@ extern bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp);
static void *lcd_logo (void)
{
-#ifdef CONFIG_LCD_INFO
- char info[80];
- char temp[32];
-#ifdef CONFIG_ATMEL_LCD
- int i;
- ulong dram_size, nand_size;
-#endif
-#endif /* CONFIG_LCD_INFO */
-
#ifdef CONFIG_SPLASH_SCREEN
char *s;
ulong addr;
@@ -800,75 +790,11 @@ static void *lcd_logo (void)
bitmap_plot (0, 0);
#endif /* CONFIG_LCD_LOGO */
-#ifdef CONFIG_MPC823
-# ifdef CONFIG_LCD_INFO
- sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__);
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
-
- sprintf (info, "(C) 2008 DENX Software Engineering GmbH");
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
- (uchar *)info, strlen(info));
-
- sprintf (info, " Wolfgang DENK, wd@denx.de");
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
- (uchar *)info, strlen(info));
-# ifdef CONFIG_LCD_INFO_BELOW_LOGO
- sprintf (info, "MPC823 CPU at %s MHz",
- strmhz(temp, gd->cpu_clk));
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
- info, strlen(info));
- sprintf (info, " %ld MB RAM, %ld MB Flash",
- gd->ram_size >> 20,
- gd->bd->bi_flashsize >> 20 );
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
- info, strlen(info));
-# else
- /* leave one blank line */
-
- sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
- strmhz(temp, gd->cpu_clk),
- gd->ram_size >> 20,
- gd->bd->bi_flashsize >> 20 );
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
- (uchar *)info, strlen(info));
-
-# endif /* CONFIG_LCD_INFO_BELOW_LOGO */
-# endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_MPC823 */
-
-#ifdef CONFIG_ATMEL_LCD
-# ifdef CONFIG_LCD_INFO
- sprintf (info, "%s", U_BOOT_VERSION);
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
-
- sprintf (info, "(C) 2008 ATMEL Corp");
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
- (uchar *)info, strlen(info));
-
- sprintf (info, "at91support@atmel.com");
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
- (uchar *)info, strlen(info));
-
- sprintf (info, "%s CPU at %s MHz",
- AT91_CPU_NAME,
- strmhz(temp, AT91_MAIN_CLOCK));
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
- (uchar *)info, strlen(info));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i].size;
- sprintf (info, " %ld MB SDRAM, %ld MB NAND",
- dram_size >> 20,
- nand_size >> 20 );
- lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
- (uchar *)info, strlen(info));
-# endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_ATMEL_LCD */
-
+#ifdef CONFIG_LCD_INFO
+ console_col = LCD_INFO_X / VIDEO_FONT_WIDTH;
+ console_row = LCD_INFO_Y / VIDEO_FONT_HEIGHT;
+ lcd_show_board_info();
+#endif /* CONFIG_LCD_INFO */
#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length));
diff --git a/include/lcd.h b/include/lcd.h
index 15affb8..512221e 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -197,6 +197,8 @@ void lcd_putc (const char c);
void lcd_puts (const char *s);
void lcd_printf (const char *fmt, ...);
+/* Allow boards to customize the information displayed */
+void lcd_show_board_info(void);
/************************************************************************/
/* ** BITMAP DISPLAY SUPPORT */