summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-08-02 23:22:59 +0000
committerwdenk <wdenk>2004-08-02 23:22:59 +0000
commit6705d81e90ed4466d6e4f445104826096da0c521 (patch)
tree4ed03c864323dacd8609cb4f84a7a8000cea6792
parent68ceb29e7133a0f972f53d3d61fd61207374baec (diff)
downloadu-boot-imx-6705d81e90ed4466d6e4f445104826096da0c521.zip
u-boot-imx-6705d81e90ed4466d6e4f445104826096da0c521.tar.gz
u-boot-imx-6705d81e90ed4466d6e4f445104826096da0c521.tar.bz2
* Patch by Andreas Engel, 12 Jul 2004:
Replaced hardcoded PL011 clock frequency with config variable. Fixed wrong CONFIG_CMD_DFL doc. * Patch by Thomas Viehweger, 09 Jun 2004: make it possible to remove chpart when there is only one partition
-rw-r--r--CHANGELOG7
-rw-r--r--README60
-rw-r--r--common/cmd_jffs2.c7
-rw-r--r--drivers/serial_pl010.c7
-rw-r--r--drivers/serial_pl011.c24
-rw-r--r--include/configs/integratorap.h1
-rw-r--r--include/configs/integratorcp.h2
-rw-r--r--include/configs/versatile.h3
8 files changed, 75 insertions, 36 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 4470f8c..7a9fc1f 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,13 @@
Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Andreas Engel, 12 Jul 2004:
+ Replaced hardcoded PL011 clock frequency with config variable.
+ Fixed wrong CONFIG_CMD_DFL doc.
+
+* Patch by Thomas Viehweger, 09 Jun 2004:
+ make it possible to remove chpart when there is only one partition
+
* Add support for console over UDP (compatible to Ingo Molnar's
netconsole patch under Linux)
diff --git a/README b/README
index 0d6eac9..570b668 100644
--- a/README
+++ b/README
@@ -380,6 +380,27 @@ The following options need to be configured:
expect it to be in bytes, others in MB.
Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.
+- Serial Ports:
+ CFG_PL010_SERIAL
+
+ Define this if you want support for Amba PrimeCell PL010 UARTs.
+
+ CFG_PL011_SERIAL
+
+ Define this if you want support for Amba PrimeCell PL011 UARTs.
+
+ CONFIG_PL011_CLOCK
+
+ If you have Amba PrimeCell PL011 UARTs, set this variable to
+ the clock speed of the UARTs.
+
+ CONFIG_PL01x_PORTS
+
+ If you have Amba PrimeCell PL010 or PL011 UARTs on your board,
+ define this to a list of base addresses for each (supported)
+ port. See e.g. include/configs/versatile.h
+
+
- Console Interface:
Depending on board, define exactly one serial port
(like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2,
@@ -541,22 +562,23 @@ The following options need to be configured:
CFG_CMD_ASKENV * ask for env variable
CFG_CMD_AUTOSCRIPT Autoscript Support
CFG_CMD_BDI bdinfo
- CFG_CMD_BEDBUG Include BedBug Debugger
+ CFG_CMD_BEDBUG * Include BedBug Debugger
CFG_CMD_BMP * BMP support
+ CFG_CMD_BSP * Board specific commands
CFG_CMD_BOOTD bootd
- CFG_CMD_CACHE icache, dcache
+ CFG_CMD_CACHE * icache, dcache
CFG_CMD_CONSOLE coninfo
CFG_CMD_DATE * support for RTC, date/time...
- CFG_CMD_DHCP DHCP support
+ CFG_CMD_DHCP * DHCP support
CFG_CMD_DIAG * Diagnostics
CFG_CMD_DOC * Disk-On-Chip Support
- CFG_CMD_DTT Digital Therm and Thermostat
+ CFG_CMD_DTT * Digital Therm and Thermostat
CFG_CMD_ECHO * echo arguments
CFG_CMD_EEPROM * EEPROM read/write support
- CFG_CMD_ELF bootelf, bootvx
+ CFG_CMD_ELF * bootelf, bootvx
CFG_CMD_ENV saveenv
CFG_CMD_FDC * Floppy Disk Support
- CFG_CMD_FAT FAT partition support
+ CFG_CMD_FAT * FAT partition support
CFG_CMD_FDOS * Dos diskette Support
CFG_CMD_FLASH flinfo, erase, protect
CFG_CMD_FPGA FPGA device initialization support
@@ -567,7 +589,7 @@ The following options need to be configured:
CFG_CMD_IMLS List all found images
CFG_CMD_IMMAP * IMMR dump support
CFG_CMD_IRQ * irqinfo
- CFG_CMD_ITEST * Integer/string test of 2 values
+ CFG_CMD_ITEST Integer/string test of 2 values
CFG_CMD_JFFS2 * JFFS2 Support
CFG_CMD_KGDB * kgdb
CFG_CMD_LOADB loadb
@@ -575,8 +597,8 @@ The following options need to be configured:
CFG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base,
loop, loopw, mtest
CFG_CMD_MISC Misc functions like sleep etc
- CFG_CMD_MMC MMC memory mapped support
- CFG_CMD_MII MII utility commands
+ CFG_CMD_MMC * MMC memory mapped support
+ CFG_CMD_MII * MII utility commands
CFG_CMD_NAND * NAND support
CFG_CMD_NET bootp, tftpboot, rarpboot
CFG_CMD_PCI * pciinfo
@@ -585,7 +607,7 @@ The following options need to be configured:
CFG_CMD_PORTIO * Port I/O
CFG_CMD_REGINFO * Register dump
CFG_CMD_RUN run command in env variable
- CFG_CMD_SAVES save S record dump
+ CFG_CMD_SAVES * save S record dump
CFG_CMD_SCSI * SCSI Support
CFG_CMD_SDRAM * print SDRAM configuration information
CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
@@ -783,6 +805,24 @@ The following options need to be configured:
enabled with CFG_CMD_MMC. The MMC driver also works with
the FAT fs. This is enabled with CFG_CMD_FAT.
+- Journaling Flash filesystem support:
+ CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
+ CONFIG_JFFS2_NAND_DEV
+ Define these for a default partition on a NAND device
+
+ CFG_JFFS2_FIRST_SECTOR,
+ CFG_JFFS2_FIRST_BANK, CFG_JFFS2_NUM_BANKS
+ Define these for a default partition on a NOR device
+
+ CFG_JFFS_CUSTOM_PART
+ Define this to create an own partition. You have to provide a
+ function struct part_info* jffs2_part_info(int part_num)
+
+ If you define only one JFFS2 partition you may also want to
+ #define CFG_JFFS_SINGLE_PART 1
+ to disable the command chpart. This is the default when you
+ have not defined a custom partition
+
- Keyboard Support:
CONFIG_ISA_KEYBOARD
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index e49b74d..f7a5f9e 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -47,6 +47,8 @@ static int part_num=0;
#ifndef CFG_JFFS_CUSTOM_PART
+#define CFG_JFFS_SINGLE_PART 1
+
static struct part_info part;
#ifndef CONFIG_JFFS2_NAND
@@ -80,9 +82,6 @@ jffs2_part_info(int part_num)
flash_info[CFG_JFFS2_FIRST_BANK].start[0];
#endif
- /* unused in current jffs2 loader */
- part.erasesize = 0;
-
/* Mark the struct as ready */
part.usr_priv=(void*)1;
@@ -230,6 +229,7 @@ do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
+#ifndef CFG_JFFS_SINGLE_PART
int
do_jffs2_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -257,6 +257,7 @@ do_jffs2_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
+#endif /* CFG_JFFS_SINGLE_PART */
/***************************************************/
diff --git a/drivers/serial_pl010.c b/drivers/serial_pl010.c
index 7ff4b85..417b6ae 100644
--- a/drivers/serial_pl010.c
+++ b/drivers/serial_pl010.c
@@ -38,13 +38,10 @@
#define IO_READ(addr) (*(volatile unsigned int *)(addr))
/* Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 */
-#define NUM_PORTS 2
#define CONSOLE_PORT CONFIG_CONS_INDEX
#define baudRate CONFIG_BAUDRATE
-static volatile unsigned char *const port[NUM_PORTS] = {
- (void *) (CFG_SERIAL0),
- (void *) (CFG_SERIAL1)
-};
+static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
+#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
static void pl010_putc (int portnum, char c);
diff --git a/drivers/serial_pl011.c b/drivers/serial_pl011.c
index 0e13226..4d35fe5 100644
--- a/drivers/serial_pl011.c
+++ b/drivers/serial_pl011.c
@@ -41,14 +41,11 @@
* IntegratorCP has two UARTs, use the first one, at 38400-8-N-1
* Versatile PB has four UARTs.
*/
-#define NUM_PORTS 2
+
#define CONSOLE_PORT CONFIG_CONS_INDEX
#define baudRate CONFIG_BAUDRATE
-static volatile unsigned char *const port[NUM_PORTS] = {
- (void *) (CFG_SERIAL0),
- (void *) (CFG_SERIAL1)
-};
-
+static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
+#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
static void pl011_putc (int portnum, char c);
static int pl011_getc (int portnum);
@@ -73,20 +70,11 @@ int serial_init (void)
** IBRD = UART_CLK / (16 * BAUD_RATE)
** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
*/
-#ifdef CONFIG_VERSATILE
temp = 16 * baudRate;
- divider = 24000000 / temp;
- remainder = 24000000 % temp;
+ divider = CONFIG_PL011_CLOCK / temp;
+ remainder = CONFIG_PL011_CLOCK % temp;
temp = (8 * remainder) / baudRate;
fraction = (temp >> 1) + (temp & 1);
-#endif
-#ifdef CONFIG_INTEGRATOR
- temp = 16 * baudRate;
- divider = 14745600 / temp;
- remainder = 14745600 % temp;
- temp = (8 * remainder) / baudRate;
- fraction = (temp >> 1) + (temp & 1);
-#endif
IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider);
IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction);
@@ -104,7 +92,7 @@ int serial_init (void)
(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
UART_PL011_CR_RXE));
- return (0);
+ return 0;
}
void serial_putc (const char c)
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 1f0792f..2674b52 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -60,6 +60,7 @@
#define CFG_PL010_SERIAL
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 38400
+#define CONFIG_PL01x_PORTS { (void *) (CFG_SERIAL0), (void *) (CFG_SERIAL1) }
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CFG_SERIAL0 0x16000000
#define CFG_SERIAL1 0x17000000
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index eb814e7..1369748 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -66,6 +66,8 @@
* NS16550 Configuration
*/
#define CFG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 14745600
+#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 38400
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index 8df0e46..49d7251 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -87,7 +87,10 @@
* NS16550 Configuration
*/
#define CFG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }
#define CONFIG_CONS_INDEX 0
+
#define CONFIG_BAUDRATE 38400
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CFG_SERIAL0 0x101F1000