summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAlexey Brodkin <Alexey.Brodkin@synopsys.com>2016-06-27 13:17:51 +0300
committerJoe Hershberger <joe.hershberger@ni.com>2016-07-06 10:45:00 -0500
commit66d027e22c55534135a43da794d31fcc98509913 (patch)
treee7b351d550528beb390f5176dadad516e6569ac1
parent2307ea4053cdf45174f842312d07f538bf5be5f6 (diff)
downloadu-boot-imx-66d027e22c55534135a43da794d31fcc98509913.zip
u-boot-imx-66d027e22c55534135a43da794d31fcc98509913.tar.gz
u-boot-imx-66d027e22c55534135a43da794d31fcc98509913.tar.bz2
net: designware: Make driver independent from DM_GPIO again
Commit 90b7fc924adf "net: designware: support phy reset device-tree bindings" made DW GMAC driver dependent on DM_GPIO by unconditional usage of purely DM_GPIO stuff like: * dm_gpio_XXX() * gpio_request_by_name() But since that driver as of today might be easily used without DM_GPIO (that's the case for Synopsys AXS10x boards) we're shielding all DM_GPIO things by ifdefs. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
-rw-r--r--drivers/net/designware.c10
-rw-r--r--drivers/net/designware.h7
2 files changed, 14 insertions, 3 deletions
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 8858f07..8ba72e3 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -80,7 +80,7 @@ static int dw_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
return ret;
}
-#if CONFIG_DM_ETH
+#if defined(CONFIG_DM_ETH) && defined(CONFIG_DM_GPIO)
static int dw_mdio_reset(struct mii_dev *bus)
{
struct udevice *dev = bus->priv;
@@ -126,7 +126,7 @@ static int dw_mdio_init(const char *name, void *priv)
bus->read = dw_mdio_read;
bus->write = dw_mdio_write;
snprintf(bus->name, sizeof(bus->name), "%s", name);
-#ifdef CONFIG_DM_ETH
+#if defined(CONFIG_DM_ETH) && defined(CONFIG_DM_GPIO)
bus->reset = dw_mdio_reset;
#endif
@@ -690,11 +690,15 @@ static const struct eth_ops designware_eth_ops = {
static int designware_eth_ofdata_to_platdata(struct udevice *dev)
{
struct dw_eth_pdata *dw_pdata = dev_get_platdata(dev);
+#ifdef CONFIG_DM_GPIO
struct dw_eth_dev *priv = dev_get_priv(dev);
+#endif
struct eth_pdata *pdata = &dw_pdata->eth_pdata;
const char *phy_mode;
const fdt32_t *cell;
+#ifdef CONFIG_DM_GPIO
int reset_flags = GPIOD_IS_OUT;
+#endif
int ret = 0;
pdata->iobase = dev_get_addr(dev);
@@ -712,6 +716,7 @@ static int designware_eth_ofdata_to_platdata(struct udevice *dev)
if (cell)
pdata->max_speed = fdt32_to_cpu(*cell);
+#ifdef CONFIG_DM_GPIO
if (fdtdec_get_bool(gd->fdt_blob, dev->of_offset,
"snps,reset-active-low"))
reset_flags |= GPIOD_ACTIVE_LOW;
@@ -724,6 +729,7 @@ static int designware_eth_ofdata_to_platdata(struct udevice *dev)
} else if (ret == -ENOENT) {
ret = 0;
}
+#endif
return ret;
}
diff --git a/drivers/net/designware.h b/drivers/net/designware.h
index 51ba769..d345c5b 100644
--- a/drivers/net/designware.h
+++ b/drivers/net/designware.h
@@ -8,7 +8,9 @@
#ifndef _DW_ETH_H
#define _DW_ETH_H
-#include <asm/gpio.h>
+#ifdef CONFIG_DM_GPIO
+#include <asm-generic/gpio.h>
+#endif
#define CONFIG_TX_DESCR_NUM 16
#define CONFIG_RX_DESCR_NUM 16
@@ -234,7 +236,10 @@ struct dw_eth_dev {
#ifndef CONFIG_DM_ETH
struct eth_device *dev;
#endif
+#ifdef CONFIG_DM_GPIO
struct gpio_desc reset_gpio;
+#endif
+
struct phy_device *phydev;
struct mii_dev *bus;
};