mmc: Tegra2: SD/MMC driver for Seaboard - eMMC on SDMMC4, SDIO on SDMMC3

Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Andy Fleming <afleming@freescale.com>

7 files changed, 751 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-tegra2/clk_rst.h b/arch/arm/include/asm/arch-tegra2/clk_rst.h
index bd8ad2c..36e27b5 100644
--- a/arch/arm/include/asm/arch-tegra2/clk_rst.h
+++ b/arch/arm/include/asm/arch-tegra2/clk_rst.h
@@ -191,4 +191,9 @@ struct clk_rst_ctlr {
 
 #define CPCON			(1 << 8)
 
+#define SWR_SDMMC4_RST		(1 << 15)
+#define CLK_ENB_SDMMC4		(1 << 15)
+#define SWR_SDMMC3_RST		(1 << 5)
+#define CLK_ENB_SDMMC3		(1 << 5)
+
 #endif	/* CLK_RST_H */
diff --git a/arch/arm/include/asm/arch-tegra2/pinmux.h b/arch/arm/include/asm/arch-tegra2/pinmux.h
index 8b4bd8d..cce936d 100644
--- a/arch/arm/include/asm/arch-tegra2/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra2/pinmux.h
@@ -51,5 +51,11 @@ struct pmux_tri_ctlr {
 #define Z_GMC			(1 << 29)
 #define Z_IRRX			(1 << 20)
 #define Z_IRTX			(1 << 19)
+#define Z_GMA			(1 << 28)
+#define Z_GME			(1 << 0)
+#define Z_ATB			(1 << 1)
+#define Z_SDB			(1 << 15)
+#define Z_SDC			(1 << 1)
+#define Z_SDD			(1 << 2)
 
 #endif	/* PINMUX_H */
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 3d6c248..627e061 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -32,6 +32,10 @@
 #include <asm/arch/uart.h>
 #include "board.h"
 
+#ifdef CONFIG_TEGRA2_MMC
+#include <mmc.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 const struct tegra2_sysinfo sysinfo = {
@@ -171,6 +175,116 @@ static void pin_mux_uart(void)
 }
 
 /*
+ * Routine: clock_init_mmc
+ * Description: init the PLL and clocks for the SDMMC controllers
+ */
+static void clock_init_mmc(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	/* Do the SDMMC resets/clock enables */
+
+	/* Assert Reset to SDMMC4 */
+	reg = readl(&clkrst->crc_rst_dev_l);
+	reg |= SWR_SDMMC4_RST;		/* SWR_SDMMC4_RST = 1 */
+	writel(reg, &clkrst->crc_rst_dev_l);
+
+	/* Enable clk to SDMMC4 */
+	reg = readl(&clkrst->crc_clk_out_enb_l);
+	reg |= CLK_ENB_SDMMC4;		/* CLK_ENB_SDMMC4 = 1 */
+	writel(reg, &clkrst->crc_clk_out_enb_l);
+
+	/* Enable pllp_out0 to SDMMC4 */
+	reg = readl(&clkrst->crc_clk_src_sdmmc4);
+	reg &= 0x3FFFFF00;	/* SDMMC4_CLK_SRC = 00, PLLP_OUT0 */
+	reg |= (10 << 1);	/* n-1, 11-1 shl 1 */
+	writel(reg, &clkrst->crc_clk_src_sdmmc4);
+
+	/*
+	 * As per the Tegra2 TRM, section 5.3.4:
+	 * 'Wait 2 us for the clock to flush through the pipe/logic'
+	 */
+	udelay(2);
+
+	/* De-assert reset to SDMMC4 */
+	reg = readl(&clkrst->crc_rst_dev_l);
+	reg &= ~SWR_SDMMC4_RST;		/* SWR_SDMMC4_RST = 0 */
+	writel(reg, &clkrst->crc_rst_dev_l);
+
+	/* Assert Reset to SDMMC3 */
+	reg = readl(&clkrst->crc_rst_dev_u);
+	reg |= SWR_SDMMC3_RST;		/* SWR_SDMMC3_RST = 1 */
+	writel(reg, &clkrst->crc_rst_dev_u);
+
+	/* Enable clk to SDMMC3 */
+	reg = readl(&clkrst->crc_clk_out_enb_u);
+	reg |= CLK_ENB_SDMMC3;		/* CLK_ENB_SDMMC3 = 1 */
+	writel(reg, &clkrst->crc_clk_out_enb_u);
+
+	/* Enable pllp_out0 to SDMMC4, set divisor to 11 for 20MHz */
+	reg = readl(&clkrst->crc_clk_src_sdmmc3);
+	reg &= 0x3FFFFF00;	/* SDMMC3_CLK_SRC = 00, PLLP_OUT0 */
+	reg |= (10 << 1);	/* n-1, 11-1 shl 1 */
+	writel(reg, &clkrst->crc_clk_src_sdmmc3);
+
+	/* wait for 2us */
+	udelay(2);
+
+	/* De-assert reset to SDMMC3 */
+	reg = readl(&clkrst->crc_rst_dev_u);
+	reg &= ~SWR_SDMMC3_RST;		/* SWR_SDMMC3_RST = 0 */
+	writel(reg, &clkrst->crc_rst_dev_u);
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+static void pin_mux_mmc(void)
+{
+	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 reg;
+
+	/* SDMMC4 */
+	/* config 2, x8 on 2nd set of pins */
+	reg = readl(&pmt->pmt_ctl_a);
+	reg |= (3 << 16);	/* ATB_SEL [17:16] = 11 SDIO4 */
+	writel(reg, &pmt->pmt_ctl_a);
+	reg = readl(&pmt->pmt_ctl_b);
+	reg |= (3 << 0);	/* GMA_SEL [1:0] = 11 SDIO4 */
+	writel(reg, &pmt->pmt_ctl_b);
+	reg = readl(&pmt->pmt_ctl_d);
+	reg |= (3 << 0);	/* GME_SEL [1:0] = 11 SDIO4 */
+	writel(reg, &pmt->pmt_ctl_d);
+
+	reg = readl(&pmt->pmt_tri_a);
+	reg &= ~Z_ATB;		/* Z_ATB = normal (0) */
+	reg &= ~Z_GMA;		/* Z_GMA = normal (0) */
+	writel(reg, &pmt->pmt_tri_a);
+	reg = readl(&pmt->pmt_tri_b);
+	reg &= ~Z_GME;		/* Z_GME = normal (0) */
+	writel(reg, &pmt->pmt_tri_b);
+
+	/* SDMMC3 */
+	/* SDIO3_CLK, SDIO3_CMD, SDIO3_DAT[3:0] */
+	reg = readl(&pmt->pmt_ctl_d);
+	reg &= 0xFFFF03FF;
+	reg |= (2 << 10);	/* SDB_SEL [11:10] = 01 SDIO3 */
+	reg |= (2 << 12);	/* SDC_SEL [13:12] = 01 SDIO3 */
+	reg |= (2 << 14);	/* SDD_SEL [15:14] = 01 SDIO3 */
+	writel(reg, &pmt->pmt_ctl_d);
+
+	reg = readl(&pmt->pmt_tri_b);
+	reg &= ~Z_SDC;		/* Z_SDC = normal (0) */
+	reg &= ~Z_SDD;		/* Z_SDD = normal (0) */
+	writel(reg, &pmt->pmt_tri_b);
+	reg = readl(&pmt->pmt_tri_d);
+	reg &= ~Z_SDB;		/* Z_SDB = normal (0) */
+	writel(reg, &pmt->pmt_tri_d);
+}
+
+/*
  * Routine: clock_init
  * Description: Do individual peripheral clock reset/enables
  */
@@ -210,3 +324,36 @@ int board_init(void)
 
 	return 0;
 }
+
+#ifdef CONFIG_TEGRA2_MMC
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+	debug("board_mmc_init called\n");
+	/* Enable clocks, muxes, etc. for SDMMC controllers */
+	clock_init_mmc();
+	pin_mux_mmc();
+
+	debug("board_mmc_init: init eMMC\n");
+	/* init dev 0, eMMC chip, with 4-bit bus */
+	tegra2_mmc_init(0, 4);
+
+	debug("board_mmc_init: init SD slot\n");
+	/* init dev 1, SD slot, with 4-bit bus */
+	tegra2_mmc_init(1, 4);
+
+	return 0;
+}
+
+/* this is a weak define that we are overriding */
+int board_mmc_getcd(u8 *cd, struct mmc *mmc)
+{
+	debug("board_mmc_getcd called\n");
+	/*
+	 * Hard-code CD presence for now. Need to add GPIO inputs
+	 * for Seaboard & Harmony (& Kaen/Aebl/Wario?)
+	 */
+	*cd = 1;
+	return 0;
+}
+#endif
diff --git a/board/nvidia/common/board.h b/board/nvidia/common/board.h
index 350bc57..4334c02 100644
--- a/board/nvidia/common/board.h
+++ b/board/nvidia/common/board.h
@@ -29,5 +29,6 @@ void clock_init(void);
 void pinmux_init(void);
 void gpio_init(void);
 void gpio_config_uart(void);
+int tegra2_mmc_init(int dev_index, int bus_width);
 
 #endif	/* BOARD_H */
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index a8fe17a..dce373d 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -38,6 +38,7 @@ COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o
 COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
 COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
 COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o
+COBJS-$(CONFIG_TEGRA2_MMC) += tegra2_mmc.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mmc/tegra2_mmc.c b/drivers/mmc/tegra2_mmc.c
new file mode 100644
index 0000000..8b6f829
--- /dev/null
+++ b/drivers/mmc/tegra2_mmc.c
@@ -0,0 +1,510 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ * Portions Copyright 2011 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/arch/clk_rst.h>
+#include "tegra2_mmc.h"
+
+/* support 4 mmc hosts */
+struct mmc mmc_dev[4];
+struct mmc_host mmc_host[4];
+
+static inline struct tegra2_mmc *tegra2_get_base_mmc(int dev_index)
+{
+	unsigned long offset;
+	debug("tegra2_get_base_mmc: dev_index = %d\n", dev_index);
+
+	switch (dev_index) {
+	case 0:
+		offset = TEGRA2_SDMMC4_BASE;
+		break;
+	case 1:
+		offset = TEGRA2_SDMMC3_BASE;
+		break;
+	case 2:
+		offset = TEGRA2_SDMMC2_BASE;
+		break;
+	case 3:
+		offset = TEGRA2_SDMMC1_BASE;
+		break;
+	default:
+		offset = TEGRA2_SDMMC4_BASE;
+		break;
+	}
+
+	return (struct tegra2_mmc *)(offset);
+}
+
+static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
+{
+	unsigned char ctrl;
+
+	debug("data->dest: %08X, data->blocks: %u, data->blocksize: %u\n",
+	(u32)data->dest, data->blocks, data->blocksize);
+
+	writel((u32)data->dest, &host->reg->sysad);
+	/*
+	 * DMASEL[4:3]
+	 * 00 = Selects SDMA
+	 * 01 = Reserved
+	 * 10 = Selects 32-bit Address ADMA2
+	 * 11 = Selects 64-bit Address ADMA2
+	 */
+	ctrl = readb(&host->reg->hostctl);
+	ctrl &= ~(3 << 3);			/* SDMA */
+	writeb(ctrl, &host->reg->hostctl);
+
+	/* We do not handle DMA boundaries, so set it to max (512 KiB) */
+	writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize);
+	writew(data->blocks, &host->reg->blkcnt);
+}
+
+static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
+{
+	unsigned short mode;
+	debug(" mmc_set_transfer_mode called\n");
+	/*
+	 * TRNMOD
+	 * MUL1SIN0[5]	: Multi/Single Block Select
+	 * RD1WT0[4]	: Data Transfer Direction Select
+	 *	1 = read
+	 *	0 = write
+	 * ENACMD12[2]	: Auto CMD12 Enable
+	 * ENBLKCNT[1]	: Block Count Enable
+	 * ENDMA[0]	: DMA Enable
+	 */
+	mode = (1 << 1) | (1 << 0);
+	if (data->blocks > 1)
+		mode |= (1 << 5);
+	if (data->flags & MMC_DATA_READ)
+		mode |= (1 << 4);
+
+	writew(mode, &host->reg->trnmod);
+}
+
+static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data)
+{
+	struct mmc_host *host = (struct mmc_host *)mmc->priv;
+	int flags, i;
+	unsigned int timeout;
+	unsigned int mask;
+	unsigned int retry = 0x100000;
+	debug(" mmc_send_cmd called\n");
+
+	/* Wait max 10 ms */
+	timeout = 10;
+
+	/*
+	 * PRNSTS
+	 * CMDINHDAT[1]	: Command Inhibit (DAT)
+	 * CMDINHCMD[0]	: Command Inhibit (CMD)
+	 */
+	mask = (1 << 0);
+	if ((data != NULL) || (cmd->resp_type & MMC_RSP_BUSY))
+		mask |= (1 << 1);
+
+	/*
+	 * We shouldn't wait for data inhibit for stop commands, even
+	 * though they might use busy signaling
+	 */
+	if (data)
+		mask &= ~(1 << 1);
+
+	while (readl(&host->reg->prnsts) & mask) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return -1;
+		}
+		timeout--;
+		udelay(1000);
+	}
+
+	if (data)
+		mmc_prepare_data(host, data);
+
+	debug("cmd->arg: %08x\n", cmd->cmdarg);
+	writel(cmd->cmdarg, &host->reg->argument);
+
+	if (data)
+		mmc_set_transfer_mode(host, data);
+
+	if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
+		return -1;
+
+	/*
+	 * CMDREG
+	 * CMDIDX[13:8]	: Command index
+	 * DATAPRNT[5]	: Data Present Select
+	 * ENCMDIDX[4]	: Command Index Check Enable
+	 * ENCMDCRC[3]	: Command CRC Check Enable
+	 * RSPTYP[1:0]
+	 *	00 = No Response
+	 *	01 = Length 136
+	 *	10 = Length 48
+	 *	11 = Length 48 Check busy after response
+	 */
+	if (!(cmd->resp_type & MMC_RSP_PRESENT))
+		flags = 0;
+	else if (cmd->resp_type & MMC_RSP_136)
+		flags = (1 << 0);
+	else if (cmd->resp_type & MMC_RSP_BUSY)
+		flags = (3 << 0);
+	else
+		flags = (2 << 0);
+
+	if (cmd->resp_type & MMC_RSP_CRC)
+		flags |= (1 << 3);
+	if (cmd->resp_type & MMC_RSP_OPCODE)
+		flags |= (1 << 4);
+	if (data)
+		flags |= (1 << 5);
+
+	debug("cmd: %d\n", cmd->cmdidx);
+
+	writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
+
+	for (i = 0; i < retry; i++) {
+		mask = readl(&host->reg->norintsts);
+		/* Command Complete */
+		if (mask & (1 << 0)) {
+			if (!data)
+				writel(mask, &host->reg->norintsts);
+			break;
+		}
+	}
+
+	if (i == retry) {
+		printf("%s: waiting for status update\n", __func__);
+		return TIMEOUT;
+	}
+
+	if (mask & (1 << 16)) {
+		/* Timeout Error */
+		debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
+		return TIMEOUT;
+	} else if (mask & (1 << 15)) {
+		/* Error Interrupt */
+		debug("error: %08x cmd %d\n", mask, cmd->cmdidx);
+		return -1;
+	}
+
+	if (cmd->resp_type & MMC_RSP_PRESENT) {
+		if (cmd->resp_type & MMC_RSP_136) {
+			/* CRC is stripped so we need to do some shifting. */
+			for (i = 0; i < 4; i++) {
+				unsigned int offset =
+					(unsigned int)(&host->reg->rspreg3 - i);
+				cmd->response[i] = readl(offset) << 8;
+
+				if (i != 3) {
+					cmd->response[i] |=
+						readb(offset - 1);
+				}
+				debug("cmd->resp[%d]: %08x\n",
+						i, cmd->response[i]);
+			}
+		} else if (cmd->resp_type & MMC_RSP_BUSY) {
+			for (i = 0; i < retry; i++) {
+				/* PRNTDATA[23:20] : DAT[3:0] Line Signal */
+				if (readl(&host->reg->prnsts)
+					& (1 << 20))	/* DAT[0] */
+					break;
+			}
+
+			if (i == retry) {
+				printf("%s: card is still busy\n", __func__);
+				return TIMEOUT;
+			}
+
+			cmd->response[0] = readl(&host->reg->rspreg0);
+			debug("cmd->resp[0]: %08x\n", cmd->response[0]);
+		} else {
+			cmd->response[0] = readl(&host->reg->rspreg0);
+			debug("cmd->resp[0]: %08x\n", cmd->response[0]);
+		}
+	}
+
+	if (data) {
+		while (1) {
+			mask = readl(&host->reg->norintsts);
+
+			if (mask & (1 << 15)) {
+				/* Error Interrupt */
+				writel(mask, &host->reg->norintsts);
+				printf("%s: error during transfer: 0x%08x\n",
+						__func__, mask);
+				return -1;
+			} else if (mask & (1 << 3)) {
+				/* DMA Interrupt */
+				debug("DMA end\n");
+				break;
+			} else if (mask & (1 << 1)) {
+				/* Transfer Complete */
+				debug("r/w is done\n");
+				break;
+			}
+		}
+		writel(mask, &host->reg->norintsts);
+	}
+
+	udelay(1000);
+	return 0;
+}
+
+static void mmc_change_clock(struct mmc_host *host, uint clock)
+{
+	int div, hw_div;
+	unsigned short clk;
+	unsigned long timeout;
+	unsigned int reg, hostbase;
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	debug(" mmc_change_clock called\n");
+
+	/* Change Tegra2 SDMMCx clock divisor here */
+	/* Source is 216MHz, PLLP_OUT0 */
+	if (clock == 0)
+		goto out;
+
+	div = 1;
+	if (clock <= 400000) {
+		hw_div = ((9-1)<<1);		/* Best match is 375KHz */
+		div = 64;
+	} else if (clock <= 20000000)
+		hw_div = ((11-1)<<1);		/* Best match is 19.6MHz */
+	else if (clock <= 26000000)
+		hw_div = ((9-1)<<1);		/* Use 24MHz */
+	else
+		hw_div = ((4-1)<<1) + 1;	/* 4.5 divisor for 48MHz */
+
+	debug("mmc_change_clock: hw_div = %d, card clock div = %d\n",
+		hw_div, div);
+
+	/* Change SDMMCx divisor */
+
+	hostbase = readl(&host->base);
+	debug("mmc_change_clock: hostbase = %08X\n", hostbase);
+
+	if (hostbase == TEGRA2_SDMMC1_BASE) {
+		reg = readl(&clkrst->crc_clk_src_sdmmc1);
+		reg &= 0xFFFFFF00;	/* divisor (7.1) = 00 */
+		reg |= hw_div;		/* n-1 */
+		writel(reg, &clkrst->crc_clk_src_sdmmc1);
+	} else if (hostbase == TEGRA2_SDMMC2_BASE) {
+		reg = readl(&clkrst->crc_clk_src_sdmmc2);
+		reg &= 0xFFFFFF00;	/* divisor (7.1) = 00 */
+		reg |= hw_div;		/* n-1 */
+		writel(reg, &clkrst->crc_clk_src_sdmmc2);
+	} else if (hostbase == TEGRA2_SDMMC3_BASE) {
+		reg = readl(&clkrst->crc_clk_src_sdmmc3);
+		reg &= 0xFFFFFF00;	/* divisor (7.1) = 00 */
+		reg |= hw_div;		/* n-1 */
+		writel(reg, &clkrst->crc_clk_src_sdmmc3);
+	} else {
+		reg = readl(&clkrst->crc_clk_src_sdmmc4);
+		reg &= 0xFFFFFF00;	/* divisor (7.1) = 00 */
+		reg |= hw_div;		/* n-1 */
+		writel(reg, &clkrst->crc_clk_src_sdmmc4);
+	}
+
+	writew(0, &host->reg->clkcon);
+
+	div >>= 1;
+	/*
+	 * CLKCON
+	 * SELFREQ[15:8]	: base clock divided by value
+	 * ENSDCLK[2]		: SD Clock Enable
+	 * STBLINTCLK[1]	: Internal Clock Stable
+	 * ENINTCLK[0]		: Internal Clock Enable
+	 */
+	clk = (div << 8) | (1 << 0);
+	writew(clk, &host->reg->clkcon);
+
+	/* Wait max 10 ms */
+	timeout = 10;
+	while (!(readw(&host->reg->clkcon) & (1 << 1))) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return;
+		}
+		timeout--;
+		udelay(1000);
+	}
+
+	clk |= (1 << 2);
+	writew(clk, &host->reg->clkcon);
+
+	debug("mmc_change_clock: clkcon = %08X\n", clk);
+	debug("mmc_change_clock: CLK_SOURCE_SDMMCx = %08X\n", reg);
+
+out:
+	host->clock = clock;
+}
+
+static void mmc_set_ios(struct mmc *mmc)
+{
+	struct mmc_host *host = mmc->priv;
+	unsigned char ctrl;
+	debug(" mmc_set_ios called\n");
+
+	debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
+
+	/* Change clock first */
+
+	mmc_change_clock(host, mmc->clock);
+
+	ctrl = readb(&host->reg->hostctl);
+
+	/*
+	 * WIDE8[5]
+	 * 0 = Depend on WIDE4
+	 * 1 = 8-bit mode
+	 * WIDE4[1]
+	 * 1 = 4-bit mode
+	 * 0 = 1-bit mode
+	 */
+	if (mmc->bus_width == 8)
+		ctrl |= (1 << 5);
+	else if (mmc->bus_width == 4)
+		ctrl |= (1 << 1);
+	else
+		ctrl &= ~(1 << 1);
+
+	writeb(ctrl, &host->reg->hostctl);
+	debug("mmc_set_ios: hostctl = %08X\n", ctrl);
+}
+
+static void mmc_reset(struct mmc_host *host)
+{
+	unsigned int timeout;
+	debug(" mmc_reset called\n");
+
+	/*
+	 * RSTALL[0] : Software reset for all
+	 * 1 = reset
+	 * 0 = work
+	 */
+	writeb((1 << 0), &host->reg->swrst);
+
+	host->clock = 0;
+
+	/* Wait max 100 ms */
+	timeout = 100;
+
+	/* hw clears the bit when it's done */
+	while (readb(&host->reg->swrst) & (1 << 0)) {
+		if (timeout == 0) {
+			printf("%s: timeout error\n", __func__);
+			return;
+		}
+		timeout--;
+		udelay(1000);
+	}
+}
+
+static int mmc_core_init(struct mmc *mmc)
+{
+	struct mmc_host *host = (struct mmc_host *)mmc->priv;
+	unsigned int mask;
+	debug(" mmc_core_init called\n");
+
+	mmc_reset(host);
+
+	host->version = readw(&host->reg->hcver);
+	debug("host version = %x\n", host->version);
+
+	/* mask all */
+	writel(0xffffffff, &host->reg->norintstsen);
+	writel(0xffffffff, &host->reg->norintsigen);
+
+	writeb(0xe, &host->reg->timeoutcon);	/* TMCLK * 2^27 */
+	/*
+	 * NORMAL Interrupt Status Enable Register init
+	 * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
+	 * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
+	 * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
+	 * [0] ENSTACMDCMPLT : Command Complete Status Enable
+	*/
+	mask = readl(&host->reg->norintstsen);
+	mask &= ~(0xffff);
+	mask |= (1 << 5) | (1 << 4) | (1 << 1) | (1 << 0);
+	writel(mask, &host->reg->norintstsen);
+
+	/*
+	 * NORMAL Interrupt Signal Enable Register init
+	 * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
+	 */
+	mask = readl(&host->reg->norintsigen);
+	mask &= ~(0xffff);
+	mask |= (1 << 1);
+	writel(mask, &host->reg->norintsigen);
+
+	return 0;
+}
+
+static int tegra2_mmc_initialize(int dev_index, int bus_width)
+{
+	struct mmc *mmc;
+
+	debug(" mmc_initialize called\n");
+
+	mmc = &mmc_dev[dev_index];
+
+	sprintf(mmc->name, "Tegra2 SD/MMC");
+	mmc->priv = &mmc_host[dev_index];
+	mmc->send_cmd = mmc_send_cmd;
+	mmc->set_ios = mmc_set_ios;
+	mmc->init = mmc_core_init;
+
+	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+	if (bus_width == 8)
+		mmc->host_caps = MMC_MODE_8BIT;
+	else
+		mmc->host_caps = MMC_MODE_4BIT;
+	mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+	/*
+	 * min freq is for card identification, and is the highest
+	 *  low-speed SDIO card frequency (actually 400KHz)
+	 * max freq is highest HS eMMC clock as per the SD/MMC spec
+	 *  (actually 52MHz)
+	 * Both of these are the closest equivalents w/216MHz source
+	 *  clock and Tegra2 SDMMC divisors.
+	 */
+	mmc->f_min = 375000;
+	mmc->f_max = 48000000;
+
+	mmc_host[dev_index].clock = 0;
+	mmc_host[dev_index].reg = tegra2_get_base_mmc(dev_index);
+	mmc_host[dev_index].base = (unsigned int)mmc_host[dev_index].reg;
+	mmc_register(mmc);
+
+	return 0;
+}
+
+int tegra2_mmc_init(int dev_index, int bus_width)
+{
+	debug(" tegra2_mmc_init: index %d, bus width %d\n",
+		dev_index, bus_width);
+	return tegra2_mmc_initialize(dev_index, bus_width);
+}
diff --git a/drivers/mmc/tegra2_mmc.h b/drivers/mmc/tegra2_mmc.h
new file mode 100644
index 0000000..4b80f9f
--- /dev/null
+++ b/drivers/mmc/tegra2_mmc.h
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Portions Copyright (C) 2011 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __TEGRA2_MMC_H_
+#define __TEGRA2_MMC_H_
+
+#define TEGRA2_SDMMC1_BASE	0xC8000000
+#define TEGRA2_SDMMC2_BASE	0xC8000200
+#define TEGRA2_SDMMC3_BASE	0xC8000400
+#define TEGRA2_SDMMC4_BASE	0xC8000600
+
+#ifndef __ASSEMBLY__
+struct tegra2_mmc {
+	unsigned int	sysad;		/* _SYSTEM_ADDRESS_0 */
+	unsigned short	blksize;	/* _BLOCK_SIZE_BLOCK_COUNT_0 15:00 */
+	unsigned short	blkcnt;		/* _BLOCK_SIZE_BLOCK_COUNT_0 31:16 */
+	unsigned int	argument;	/* _ARGUMENT_0 */
+	unsigned short	trnmod;		/* _CMD_XFER_MODE_0 15:00 xfer mode */
+	unsigned short	cmdreg;		/* _CMD_XFER_MODE_0 31:16 cmd reg */
+	unsigned int	rspreg0;	/* _RESPONSE_R0_R1_0 CMD RESP 31:00 */
+	unsigned int	rspreg1;	/* _RESPONSE_R2_R3_0 CMD RESP 63:32 */
+	unsigned int	rspreg2;	/* _RESPONSE_R4_R5_0 CMD RESP 95:64 */
+	unsigned int	rspreg3;	/* _RESPONSE_R6_R7_0 CMD RESP 127:96 */
+	unsigned int	bdata;		/* _BUFFER_DATA_PORT_0 */
+	unsigned int	prnsts;		/* _PRESENT_STATE_0 */
+	unsigned char	hostctl;	/* _POWER_CONTROL_HOST_0 7:00 */
+	unsigned char	pwrcon;		/* _POWER_CONTROL_HOST_0 15:8 */
+	unsigned char	blkgap;		/* _POWER_CONTROL_HOST_9 23:16 */
+	unsigned char	wakcon;		/* _POWER_CONTROL_HOST_0 31:24 */
+	unsigned short	clkcon;		/* _CLOCK_CONTROL_0 15:00 */
+	unsigned char	timeoutcon;	/* _TIMEOUT_CTRL 23:16 */
+	unsigned char	swrst;		/* _SW_RESET_ 31:24 */
+	unsigned int	norintsts;	/* _INTERRUPT_STATUS_0 */
+	unsigned int	norintstsen;	/* _INTERRUPT_STATUS_ENABLE_0 */
+	unsigned int	norintsigen;	/* _INTERRUPT_SIGNAL_ENABLE_0 */
+	unsigned short	acmd12errsts;	/* _AUTO_CMD12_ERR_STATUS_0 15:00 */
+	unsigned char	res1[2];	/* _RESERVED 31:16 */
+	unsigned int	capareg;	/* _CAPABILITIES_0 */
+	unsigned char	res2[4];	/* RESERVED, offset 44h-47h */
+	unsigned int	maxcurr;	/* _MAXIMUM_CURRENT_0 */
+	unsigned char	res3[4];	/* RESERVED, offset 4Ch-4Fh */
+	unsigned short	setacmd12err;	/* offset 50h */
+	unsigned short	setinterr;	/* offset 52h */
+	unsigned char	admaerr;	/* offset 54h */
+	unsigned char	res4[3];	/* RESERVED, offset 55h-57h */
+	unsigned long	admaaddr;	/* offset 58h-5Fh */
+	unsigned char	res5[0x9c];	/* RESERVED, offset 60h-FBh */
+	unsigned short	slotintstatus;	/* offset FCh */
+	unsigned short	hcver;		/* HOST Version */
+	unsigned char	res6[0x100];	/* RESERVED, offset 100h-1FFh */
+};
+
+struct mmc_host {
+	struct tegra2_mmc *reg;
+	unsigned int version;	/* SDHCI spec. version */
+	unsigned int clock;	/* Current clock (MHz) */
+	unsigned int base;	/* Base address, SDMMC1/2/3/4 */
+};
+
+int tegra2_mmc_init(int dev_index, int bus_width);
+
+#endif	/* __ASSEMBLY__ */
+#endif	/* __TEGRA2_MMC_H_ */