summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAndy Fleming <afleming@freescale.com>2011-04-08 02:10:54 -0500
committerAndy Fleming <afleming@freescale.com>2011-04-20 15:09:34 -0500
commit063c12633d5ad74d52152d9c358e715475e17629 (patch)
tree872f1bfe0cd0eb14eb38bdb51e1351c064d98dc4
parent9082eeac5de1335d663016668c9b89c290f5c79b (diff)
downloadu-boot-imx-063c12633d5ad74d52152d9c358e715475e17629.zip
u-boot-imx-063c12633d5ad74d52152d9c358e715475e17629.tar.gz
u-boot-imx-063c12633d5ad74d52152d9c358e715475e17629.tar.bz2
tsec: Convert tsec to use PHY Lib
This converts tsec to use the new PHY Lib. All of the old PHY support is ripped out. The old MDIO driver is split off, and placed in fsl_mdio.c. The initialization is modified to initialize the MDIO driver as well. The powerpc config file is modified to configure PHYLIB if TSEC_ENET is configured. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Detlev Zundel <dzu@denx.de>
-rw-r--r--arch/powerpc/include/asm/config.h9
-rw-r--r--arch/powerpc/include/asm/fsl_enet.h10
-rw-r--r--board/freescale/mpc837xemds/mpc837xemds.c7
-rw-r--r--board/freescale/mpc8536ds/mpc8536ds.c6
-rw-r--r--board/freescale/mpc8544ds/mpc8544ds.c30
-rw-r--r--board/freescale/mpc8572ds/mpc8572ds.c6
-rw-r--r--board/freescale/p1022ds/p1022ds.c6
-rw-r--r--board/freescale/p1_p2_rdb/p1_p2_rdb.c6
-rw-r--r--board/freescale/p2020ds/p2020ds.c7
-rw-r--r--drivers/net/Makefile2
-rw-r--r--drivers/net/fsl_mdio.c120
-rw-r--r--drivers/net/tsec.c1602
-rw-r--r--include/fsl_mdio.h62
-rw-r--r--include/tsec.h298
14 files changed, 391 insertions, 1780 deletions
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index 536f142..624d8c2 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -80,6 +80,15 @@
#endif
#endif
+/* The TSEC driver uses the PHYLIB infrastructure */
+#ifndef CONFIG_PHYLIB
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_PHYLIB
+
+#include <config_phylib_all_drivers.h>
+#endif /* TSEC_ENET */
+#endif /* !CONFIG_PHYLIB */
+
/* All PPC boards must swap IDE bytes */
#define CONFIG_IDE_SWAP_IO
diff --git a/arch/powerpc/include/asm/fsl_enet.h b/arch/powerpc/include/asm/fsl_enet.h
index 4fb2857..1f8f8e4 100644
--- a/arch/powerpc/include/asm/fsl_enet.h
+++ b/arch/powerpc/include/asm/fsl_enet.h
@@ -28,6 +28,16 @@ enum fsl_phy_enet_if {
FSL_ETH_IF_NONE,
};
+struct tsec_mii_mng {
+ u32 miimcfg; /* MII management configuration reg */
+ u32 miimcom; /* MII management command reg */
+ u32 miimadd; /* MII management address reg */
+ u32 miimcon; /* MII management control reg */
+ u32 miimstat; /* MII management status reg */
+ u32 miimind; /* MII management indication reg */
+ u32 ifstat; /* Interface Status Register */
+} __attribute__ ((packed));
+
int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc);
#endif /* __ASM_PPC_FSL_ENET_H */
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index 51dd692..ee1ebd9 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -21,6 +21,7 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <fsl_esdhc.h>
+#include <fsl_mdio.h>
#include "pci.h"
#include "../common/pq-mds-pib.h"
@@ -86,6 +87,7 @@ int board_mmc_init(bd_t *bd)
#if defined(CONFIG_TSEC1) || defined(CONFIG_TSEC2)
int board_eth_init(bd_t *bd)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[2];
struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
u32 rcwh = in_be32(&im->reset.rcwh);
@@ -131,6 +133,11 @@ int board_eth_init(bd_t *bd)
}
num++;
#endif
+
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bd, &mdio_info);
+
return tsec_eth_init(bd, tsec_info, num);
}
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index f83f629..b292e13 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -36,6 +36,7 @@
#include <libfdt.h>
#include <spd_sdram.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <netdev.h>
#include <sata.h>
@@ -234,6 +235,7 @@ int board_early_init_r(void)
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_TSEC_ENET
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[2];
int num = 0;
@@ -268,6 +270,10 @@ int board_eth_init(bd_t *bis)
}
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
tsec_eth_init(bis, tsec_info, num);
#endif
return pci_eth_init(bis);
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index a48c815..6fe8d39 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -33,6 +33,7 @@
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <netdev.h>
@@ -248,9 +249,35 @@ get_board_sys_clk(ulong dummy)
return val;
}
+
+#define MIIM_CIS8204_SLED_CON 0x1b
+#define MIIM_CIS8204_SLEDCON_INIT 0x1115
+/*
+ * Hack to write all 4 PHYs with the LED values
+ */
+int board_phy_config(struct phy_device *phydev)
+{
+ static int do_once;
+ uint phyid;
+ struct mii_dev *bus = phydev->bus;
+
+ if (do_once)
+ return 0;
+
+ for (phyid = 0; phyid < 4; phyid++)
+ bus->write(bus, phyid, MDIO_DEVAD_NONE, MIIM_CIS8204_SLED_CON,
+ MIIM_CIS8204_SLEDCON_INIT);
+
+ do_once = 1;
+
+ return 0;
+}
+
+
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_TSEC_ENET
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[2];
int num = 0;
@@ -282,6 +309,9 @@ int board_eth_init(bd_t *bis)
fsl_sgmii_riser_init(tsec_info, num);
}
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
tsec_eth_init(bis, tsec_info, num);
#endif
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index f444805..b20299e 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -35,6 +35,7 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <tsec.h>
+#include <fsl_mdio.h>
#include <netdev.h>
#include "../common/sgmii_riser.h"
@@ -187,6 +188,7 @@ int board_early_init_r(void)
#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
int num = 0;
@@ -233,6 +235,10 @@ int board_eth_init(bd_t *bis)
fsl_sgmii_riser_init(tsec_info, num);
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 8b78404..73a1021 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -22,6 +22,7 @@
#include <asm/io.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <asm/fsl_law.h>
#include <netdev.h>
@@ -279,6 +280,7 @@ int board_early_init_r(void)
*/
int board_eth_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[2];
unsigned int num = 0;
@@ -291,6 +293,10 @@ int board_eth_init(bd_t *bis)
num++;
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
}
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index 307c3e2..0b4ae9d 100644
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -31,6 +31,7 @@
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <vsc7385.h>
#include <netdev.h>
@@ -179,6 +180,7 @@ int board_early_init_r(void)
#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
int num = 0;
char *tmp;
@@ -216,6 +218,10 @@ int board_eth_init(bd_t *bis)
puts("No address specified for VSC7385 microcode.\n");
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index 238b4d9..d3af6cf 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -34,6 +34,7 @@
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <asm/fsl_law.h>
#include <netdev.h>
@@ -201,6 +202,7 @@ int board_early_init_r(void)
#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
int num = 0;
@@ -235,6 +237,11 @@ int board_eth_init(bd_t *bis)
fsl_sgmii_riser_init(tsec_info, num);
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+
+ fsl_pq_mdio_init(bis, &mdio_info);
+
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index fd9d0b4..819b197 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -79,7 +79,7 @@ COBJS-$(CONFIG_TIGON3) += tigon3.o
COBJS-$(CONFIG_TIGON3) += bcm570x_autoneg.o
COBJS-$(CONFIG_TIGON3) += 5701rls.o
COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
-COBJS-$(CONFIG_TSEC_ENET) += tsec.o
+COBJS-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o
COBJS-$(CONFIG_ULI526X) += uli526x.o
COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o
diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c
new file mode 100644
index 0000000..1aab307
--- /dev/null
+++ b/drivers/net/fsl_mdio.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Jun-jie Zhang <b18070@freescale.com>
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <fsl_mdio.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/fsl_enet.h>
+
+void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
+ int dev_addr, int regnum, int value)
+{
+ int timeout = 1000000;
+
+ out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f));
+ out_be32(&phyregs->miimcon, value);
+ asm("sync");
+
+ while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--)
+ ;
+}
+
+int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
+ int dev_addr, int regnum)
+{
+ int value;
+ int timeout = 1000000;
+
+ /* Put the address of the phy, and the register
+ * number into MIIMADD */
+ out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f));
+
+ /* Clear the command register, and wait */
+ out_be32(&phyregs->miimcom, 0);
+ asm("sync");
+
+ /* Initiate a read command, and wait */
+ out_be32(&phyregs->miimcom, MIIMCOM_READ_CYCLE);
+ asm("sync");
+
+ /* Wait for the the indication that the read is done */
+ while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
+ && timeout--)
+ ;
+
+ /* Grab the value read from the PHY */
+ value = in_be32(&phyregs->miimstat);
+
+ return value;
+}
+
+static int fsl_pq_mdio_reset(struct mii_dev *bus)
+{
+ struct tsec_mii_mng *regs = bus->priv;
+
+ /* Reset MII (due to new addresses) */
+ out_be32(&regs->miimcfg, MIIMCFG_RESET_MGMT);
+
+ out_be32(&regs->miimcfg, MIIMCFG_INIT_VALUE);
+
+ while (in_be32(&regs->miimind) & MIIMIND_BUSY)
+ ;
+
+ return 0;
+}
+
+int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum)
+{
+ struct tsec_mii_mng *phyregs = bus->priv;
+
+ return tsec_local_mdio_read(phyregs, addr, dev_addr, regnum);
+}
+
+int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
+ u16 value)
+{
+ struct tsec_mii_mng *phyregs = bus->priv;
+
+ tsec_local_mdio_write(phyregs, addr, dev_addr, regnum, value);
+
+ return 0;
+}
+
+int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info)
+{
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate FSL MDIO bus\n");
+ return -1;
+ }
+
+ bus->read = tsec_phy_read;
+ bus->write = tsec_phy_write;
+ bus->reset = fsl_pq_mdio_reset;
+ sprintf(bus->name, info->name);
+
+ bus->priv = info->regs;
+
+ return mdio_register(bus);
+}
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index a3857b3..06e5834 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -17,10 +17,9 @@
#include <net.h>
#include <command.h>
#include <tsec.h>
+#include <fsl_mdio.h>
#include <asm/errno.h>
-#include "miiphy.h"
-
DECLARE_GLOBAL_DATA_PTR;
#define TX_BUF_CNT 2
@@ -56,10 +55,10 @@ static struct tsec_info_struct tsec_info[] = {
#ifdef CONFIG_MPC85XX_FEC
{
.regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000),
- .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR),
.devname = CONFIG_MPC85XX_FEC_NAME,
.phyaddr = FEC_PHY_ADDR,
- .flags = FEC_FLAGS
+ .flags = FEC_FLAGS,
+ .mii_devname = DEFAULT_MII_NAME
}, /* FEC */
#endif
#ifdef CONFIG_TSEC3
@@ -70,58 +69,6 @@ static struct tsec_info_struct tsec_info[] = {
#endif
};
-/* Writes the given phy's reg with value, using the specified MDIO regs */
-static void tsec_local_mdio_write(tsec_mdio_t *phyregs, uint addr,
- uint reg, uint value)
-{
- int timeout = 1000000;
-
- out_be32(&phyregs->miimadd, (addr << 8) | reg);
- out_be32(&phyregs->miimcon, value);
-
- timeout = 1000000;
- while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--)
- ;
-}
-
-/* Provide the default behavior of writing the PHY of this ethernet device */
-#define write_phy_reg(priv, regnum, value) \
- tsec_local_mdio_write(priv->phyregs,priv->phyaddr,regnum,value)
-
-/* Reads register regnum on the device's PHY through the
- * specified registers. It lowers and raises the read
- * command, and waits for the data to become valid (miimind
- * notvalid bit cleared), and the bus to cease activity (miimind
- * busy bit cleared), and then returns the value
- */
-static uint tsec_local_mdio_read(tsec_mdio_t *phyregs, uint phyid, uint regnum)
-{
- uint value;
-
- /* Put the address of the phy, and the register
- * number into MIIMADD */
- out_be32(&phyregs->miimadd, (phyid << 8) | regnum);
-
- /* Clear the command register, and wait */
- out_be32(&phyregs->miimcom, 0);
-
- /* Initiate a read command, and wait */
- out_be32(&phyregs->miimcom, MIIM_READ_COMMAND);
-
- /* Wait for the the indication that the read is done */
- while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)))
- ;
-
- /* Grab the value read from the PHY */
- value = in_be32(&phyregs->miimstat);
-
- return value;
-}
-
-/* #define to provide old read_phy_reg functionality without duplicating code */
-#define read_phy_reg(priv,regnum) \
- tsec_local_mdio_read(priv->phyregs,priv->phyaddr,regnum)
-
#define TBIANA_SETTINGS ( \
TBIANA_ASYMMETRIC_PAUSE \
| TBIANA_SYMMETRIC_PAUSE \
@@ -143,1407 +90,14 @@ static void tsec_configure_serdes(struct tsec_private *priv)
{
/* Access TBI PHY registers at given TSEC register offset as opposed
* to the register offset used for external PHY accesses */
- tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_ANA,
- TBIANA_SETTINGS);
- tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_TBICON,
- TBICON_CLK_SELECT);
- tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_CR,
- CONFIG_TSEC_TBICR_SETTINGS);
-}
-
-/*
- * Returns which value to write to the control register.
- * For 10/100, the value is slightly different
- */
-static uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
-{
- if (priv->flags & TSEC_GIGABIT)
- return MIIM_CONTROL_INIT;
- else
- return MIIM_CR_INIT;
+ tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
+ 0, TBI_ANA, TBIANA_SETTINGS);
+ tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
+ 0, TBI_TBICON, TBICON_CLK_SELECT);
+ tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
+ 0, TBI_CR, CONFIG_TSEC_TBICR_SETTINGS);
}
-/*
- * Wait for auto-negotiation to complete, then determine link
- */
-static uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
-{
- /*
- * Wait if the link is up, and autonegotiation is in progress
- * (ie - we're capable and it's not done)
- */
- mii_reg = read_phy_reg(priv, MIIM_STATUS);
- if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) {
- int i = 0;
-
- puts("Waiting for PHY auto negotiation to complete");
- while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
- /*
- * Timeout reached ?
- */
- if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts(" TIMEOUT !\n");
- priv->link = 0;
- return 0;
- }
-
- if (ctrlc()) {
- puts("user interrupt!\n");
- priv->link = 0;
- return -EINTR;
- }
-
- if ((i++ % 1000) == 0) {
- putc('.');
- }
- udelay(1000); /* 1 ms */
- mii_reg = read_phy_reg(priv, MIIM_STATUS);
- }
- puts(" done\n");
-
- /* Link status bit is latched low, read it again */
- mii_reg = read_phy_reg(priv, MIIM_STATUS);
-
- udelay(500000); /* another 500 ms (results in faster booting) */
- }
-
- priv->link = mii_reg & MIIM_STATUS_LINK ? 1 : 0;
-
- return 0;
-}
-
-/* Generic function which updates the speed and duplex. If
- * autonegotiation is enabled, it uses the AND of the link
- * partner's advertised capabilities and our advertised
- * capabilities. If autonegotiation is disabled, we use the
- * appropriate bits in the control register.
- *
- * Stolen from Linux's mii.c and phy_device.c
- */
-static uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
-{
- /* We're using autonegotiation */
- if (mii_reg & BMSR_ANEGCAPABLE) {
- uint lpa = 0;
- uint gblpa = 0;
-
- /* Check for gigabit capability */
- if (mii_reg & BMSR_ERCAP) {
- /* We want a list of states supported by
- * both PHYs in the link
- */
- gblpa = read_phy_reg(priv, MII_STAT1000);
- gblpa &= read_phy_reg(priv, MII_CTRL1000) << 2;
- }
-
- /* Set the baseline so we only have to set them
- * if they're different
- */
- priv->speed = 10;
- priv->duplexity = 0;
-
- /* Check the gigabit fields */
- if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
- priv->speed = 1000;
-
- if (gblpa & PHY_1000BTSR_1000FD)
- priv->duplexity = 1;
-
- /* We're done! */
- return 0;
- }
-
- lpa = read_phy_reg(priv, MII_ADVERTISE);
- lpa &= read_phy_reg(priv, MII_LPA);
-
- if (lpa & (LPA_100FULL | LPA_100HALF)) {
- priv->speed = 100;
-
- if (lpa & LPA_100FULL)
- priv->duplexity = 1;
-
- } else if (lpa & LPA_10FULL)
- priv->duplexity = 1;
- } else {
- uint bmcr = read_phy_reg(priv, MII_BMCR);
-
- priv->speed = 10;
- priv->duplexity = 0;
-
- if (bmcr & BMCR_FULLDPLX)
- priv->duplexity = 1;
-
- if (bmcr & BMCR_SPEED1000)
- priv->speed = 1000;
- else if (bmcr & BMCR_SPEED100)
- priv->speed = 100;
- }
-
- return 0;
-}
-
-/*
- * "Ethernet@Wirespeed" needs to be enabled to achieve link in certain
- * circumstances. eg a gigabit TSEC connected to a gigabit switch with
- * a 4-wire ethernet cable. Both ends advertise gigabit, but can't
- * link. "Ethernet@Wirespeed" reduces advertised speed until link
- * can be achieved.
- */
-static uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
-{
- return (read_phy_reg(priv, mii_reg) & 0x8FFF) | 0x8010;
-}
-
-/*
- * Parse the BCM54xx status register for speed and duplex information.
- * The linux sungem_phy has this information, but in a table format.
- */
-static uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
-{
- /* If there is no link, speed and duplex don't matter */
- if (!priv->link)
- return 0;
-
- switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
- MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
- case 1:
- priv->duplexity = 0;
- priv->speed = 10;
- break;
- case 2:
- priv->duplexity = 1;
- priv->speed = 10;
- break;
- case 3:
- priv->duplexity = 0;
- priv->speed = 100;
- break;
- case 5:
- priv->duplexity = 1;
- priv->speed = 100;
- break;
- case 6:
- priv->duplexity = 0;
- priv->speed = 1000;
- break;
- case 7:
- priv->duplexity = 1;
- priv->speed = 1000;
- break;
- default:
- printf("Auto-neg error, defaulting to 10BT/HD\n");
- priv->duplexity = 0;
- priv->speed = 10;
- break;
- }
-
- return 0;
-}
-
-/*
- * Find out if PHY is in copper or serdes mode by looking at Expansion Reg
- * 0x42 - "Operating Mode Status Register"
- */
-static int BCM8482_is_serdes(struct tsec_private *priv)
-{
- u16 val;
- int serdes = 0;
-
- write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_ER | 0x42);
- val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA);
-
- switch (val & 0x1f) {
- case 0x0d: /* RGMII-to-100Base-FX */
- case 0x0e: /* RGMII-to-SGMII */
- case 0x0f: /* RGMII-to-SerDes */
- case 0x12: /* SGMII-to-SerDes */
- case 0x13: /* SGMII-to-100Base-FX */
- case 0x16: /* SerDes-to-Serdes */
- serdes = 1;
- break;
- case 0x6: /* RGMII-to-Copper */
- case 0x14: /* SGMII-to-Copper */
- case 0x17: /* SerDes-to-Copper */
- break;
- default:
- printf("ERROR, invalid PHY mode (0x%x\n)", val);
- break;
- }
-
- return serdes;
-}
-
-/*
- * Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating
- * Mode Status Register"
- */
-uint mii_parse_BCM5482_serdes_sr(struct tsec_private *priv)
-{
- u16 val;
- int i = 0;
-
- /* Wait 1s for link - Clause 37 autonegotiation happens very fast */
- while (1) {
- write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL,
- MIIM_BCM54XX_EXP_SEL_ER | 0x42);
- val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA);
-
- if (val & 0x8000)
- break;
-
- if (i++ > 1000) {
- priv->link = 0;
- return 1;
- }
-
- udelay(1000); /* 1 ms */
- }
-
- priv->link = 1;
- switch ((val >> 13) & 0x3) {
- case (0x00):
- priv->speed = 10;
- break;
- case (0x01):
- priv->speed = 100;
- break;
- case (0x02):
- priv->speed = 1000;
- break;
- }
-
- priv->duplexity = (val & 0x1000) == 0x1000;
-
- return 0;
-}
-
-/*
- * Figure out if BCM5482 is in serdes or copper mode and determine link
- * configuration accordingly
- */
-static uint mii_parse_BCM5482_sr(uint mii_reg, struct tsec_private *priv)
-{
- if (BCM8482_is_serdes(priv)) {
- mii_parse_BCM5482_serdes_sr(priv);
- priv->flags |= TSEC_FIBER;
- } else {
- /* Wait for auto-negotiation to complete or fail */
- mii_parse_sr(mii_reg, priv);
-
- /* Parse BCM54xx copper aux status register */
- mii_reg = read_phy_reg(priv, MIIM_BCM54xx_AUXSTATUS);
- mii_parse_BCM54xx_sr(mii_reg, priv);
- }
-
- return 0;
-}
-
-/* Parse the 88E1011's status register for speed and duplex
- * information
- */
-static uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
-{
- uint speed;
-
- mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS);
-
- if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) &&
- !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
- int i = 0;
-
- puts("Waiting for PHY realtime link");
- while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
- /* Timeout reached ? */
- if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts(" TIMEOUT !\n");
- priv->link = 0;
- break;
- }
-
- if ((i++ % 1000) == 0) {
- putc('.');
- }
- udelay(1000); /* 1 ms */
- mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS);
- }
- puts(" done\n");
- udelay(500000); /* another 500 ms (results in faster booting) */
- } else {
- if (mii_reg & MIIM_88E1011_PHYSTAT_LINK)
- priv->link = 1;
- else
- priv->link = 0;
- }
-
- if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
-
- switch (speed) {
- case MIIM_88E1011_PHYSTAT_GBIT:
- priv->speed = 1000;
- break;
- case MIIM_88E1011_PHYSTAT_100:
- priv->speed = 100;
- break;
- default:
- priv->speed = 10;
- }
-
- return 0;
-}
-
-/* Parse the RTL8211B's status register for speed and duplex
- * information
- */
-static uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv)
-{
- uint speed;
-
- mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS);
- if (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
- int i = 0;
-
- /* in case of timeout ->link is cleared */
- priv->link = 1;
- puts("Waiting for PHY realtime link");
- while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
- /* Timeout reached ? */
- if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts(" TIMEOUT !\n");
- priv->link = 0;
- break;
- }
-
- if ((i++ % 1000) == 0) {
- putc('.');
- }
- udelay(1000); /* 1 ms */
- mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS);
- }
- puts(" done\n");
- udelay(500000); /* another 500 ms (results in faster booting) */
- } else {
- if (mii_reg & MIIM_RTL8211B_PHYSTAT_LINK)
- priv->link = 1;
- else
- priv->link = 0;
- }
-
- if (mii_reg & MIIM_RTL8211B_PHYSTAT_DUPLEX)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- speed = (mii_reg & MIIM_RTL8211B_PHYSTAT_SPEED);
-
- switch (speed) {
- case MIIM_RTL8211B_PHYSTAT_GBIT:
- priv->speed = 1000;
- break;
- case MIIM_RTL8211B_PHYSTAT_100:
- priv->speed = 100;
- break;
- default:
- priv->speed = 10;
- }
-
- return 0;
-}
-
-/* Parse the cis8201's status register for speed and duplex
- * information
- */
-static uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
-{
- uint speed;
-
- if (mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- speed = mii_reg & MIIM_CIS8201_AUXCONSTAT_SPEED;
- switch (speed) {
- case MIIM_CIS8201_AUXCONSTAT_GBIT:
- priv->speed = 1000;
- break;
- case MIIM_CIS8201_AUXCONSTAT_100:
- priv->speed = 100;
- break;
- default:
- priv->speed = 10;
- break;
- }
-
- return 0;
-}
-
-/* Parse the vsc8244's status register for speed and duplex
- * information
- */
-static uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
-{
- uint speed;
-
- if (mii_reg & MIIM_VSC8244_AUXCONSTAT_DUPLEX)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- speed = mii_reg & MIIM_VSC8244_AUXCONSTAT_SPEED;
- switch (speed) {
- case MIIM_VSC8244_AUXCONSTAT_GBIT:
- priv->speed = 1000;
- break;
- case MIIM_VSC8244_AUXCONSTAT_100:
- priv->speed = 100;
- break;
- default:
- priv->speed = 10;
- break;
- }
-
- return 0;
-}
-
-/* Parse the DM9161's status register for speed and duplex
- * information
- */
-static uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
-{
- if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
- priv->speed = 100;
- else
- priv->speed = 10;
-
- if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- return 0;
-}
-
-/*
- * Hack to write all 4 PHYs with the LED values
- */
-static uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
-{
- uint phyid;
- tsec_mdio_t *regbase = priv->phyregs;
- int timeout = 1000000;
-
- for (phyid = 0; phyid < 4; phyid++) {
- out_be32(&regbase->miimadd, (phyid << 8) | mii_reg);
- out_be32(&regbase->miimcon, MIIM_CIS8204_SLEDCON_INIT);
-
- timeout = 1000000;
- while ((in_be32(&regbase->miimind) & MIIMIND_BUSY) && timeout--)
- ;
- }
-
- return MIIM_CIS8204_SLEDCON_INIT;
-}
-
-static uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
-{
- if (priv->flags & TSEC_REDUCED)
- return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII;
- else
- return MIIM_CIS8204_EPHYCON_INIT;
-}
-
-static uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
-{
- uint mii_data = read_phy_reg(priv, mii_reg);
-
- if (priv->flags & TSEC_REDUCED)
- mii_data = (mii_data & 0xfff0) | 0x000b;
- return mii_data;
-}
-
-static struct phy_info phy_info_M88E1149S = {
- 0x1410ca,
- "Marvell 88E1149S",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1d, 0x1f, NULL},
- {0x1e, 0x200c, NULL},
- {0x1d, 0x5, NULL},
- {0x1e, 0x0, NULL},
- {0x1e, 0x100, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-/* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
-static struct phy_info phy_info_BCM5461S = {
- 0x02060c1, /* 5461 ID */
- "Broadcom BCM5461S",
- 0, /* not clear to me what minor revisions we can shift away */
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_BCM5464S = {
- 0x02060b1, /* 5464 ID */
- "Broadcom BCM5464S",
- 0, /* not clear to me what minor revisions we can shift away */
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_BCM5482S = {
- 0x0143bcb,
- "Broadcom BCM5482S",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- /* Setup read from auxilary control shadow register 7 */
- {MIIM_BCM54xx_AUXCNTL, MIIM_BCM54xx_AUXCNTL_ENCODE(7), NULL},
- /* Read Misc Control register and or in Ethernet@Wirespeed */
- {MIIM_BCM54xx_AUXCNTL, 0, &mii_BCM54xx_wirespeed},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- /* Initial config/enable of secondary SerDes interface */
- {MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf), NULL},
- /* Write intial value to secondary SerDes Contol */
- {MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_SSD | 0, NULL},
- {MIIM_BCM54XX_EXP_DATA, MIIM_CONTROL_RESTART, NULL},
- /* Enable copper/fiber auto-detect */
- {MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201)},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Determine copper/fiber, auto-negotiate, and read the result */
- {MIIM_STATUS, miim_read, &mii_parse_BCM5482_sr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_M88E1011S = {
- 0x01410c6,
- "Marvell 88E1011S",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1d, 0x1f, NULL},
- {0x1e, 0x200c, NULL},
- {0x1d, 0x5, NULL},
- {0x1e, 0x0, NULL},
- {0x1e, 0x100, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_M88E1111S = {
- 0x01410cc,
- "Marvell 88E1111S",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1b, 0x848f, &mii_m88e1111s_setmode},
- {0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_M88E1118 = {
- 0x01410e1,
- "Marvell 88E1118",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x16, 0x0002, NULL}, /* Change Page Number */
- {0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */
- {0x16, 0x0003, NULL}, /* Change Page Number */
- {0x10, 0x021e, NULL}, /* Adjust LED control */
- {0x16, 0x0000, NULL}, /* Change Page Number */
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- {0x16, 0x0000, NULL}, /* Change Page Number */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read,
- &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-/*
- * Since to access LED register we need do switch the page, we
- * do LED configuring in the miim_read-like function as follows
- */
-static uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv)
-{
- uint pg;
-
- /* Switch the page to access the led register */
- pg = read_phy_reg(priv, MIIM_88E1121_PHY_PAGE);
- write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, MIIM_88E1121_PHY_LED_PAGE);
-
- /* Configure leds */
- write_phy_reg(priv, MIIM_88E1121_PHY_LED_CTRL,
- MIIM_88E1121_PHY_LED_DEF);
-
- /* Restore the page pointer */
- write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, pg);
- return 0;
-}
-
-static struct phy_info phy_info_M88E1121R = {
- 0x01410cb,
- "Marvell 88E1121R",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- /* Configure leds */
- {MIIM_88E1121_PHY_LED_CTRL, miim_read, &mii_88E1121_set_led},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- /* Disable IRQs and de-assert interrupt */
- {MIIM_88E1121_PHY_IRQ_EN, 0, NULL},
- {MIIM_88E1121_PHY_IRQ_STATUS, miim_read, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- {MIIM_STATUS, miim_read, &mii_parse_link},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static unsigned int m88e1145_setmode(uint mii_reg, struct tsec_private *priv)
-{
- uint mii_data = read_phy_reg(priv, mii_reg);
-
- /* Setting MIIM_88E1145_PHY_EXT_CR */
- if (priv->flags & TSEC_REDUCED)
- return mii_data |
- MIIM_M88E1145_RGMII_RX_DELAY | MIIM_M88E1145_RGMII_TX_DELAY;
- else
- return mii_data;
-}
-
-static struct phy_info phy_info_M88E1145 = {
- 0x01410cd,
- "Marvell 88E1145",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-
- /* Errata E0, E1 */
- {29, 0x001b, NULL},
- {30, 0x418f, NULL},
- {29, 0x0016, NULL},
- {30, 0xa2da, NULL},
-
- /* Configure the PHY */
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_88E1011_PHY_SCR, MIIM_88E1011_PHY_MDI_X_AUTO, NULL},
- {MIIM_88E1145_PHY_EXT_CR, 0, &m88e1145_setmode},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- {MIIM_88E1111_PHY_LED_CONTROL, MIIM_88E1111_PHY_LED_DIRECT, NULL},
- /* Read the Status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_cis8204 = {
- 0x3f11,
- "Cicada Cis8204",
- 6,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT,
- &mii_cis8204_fixled},
- {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT,
- &mii_cis8204_setmode},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-/* Cicada 8201 */
-static struct phy_info phy_info_cis8201 = {
- 0xfc41,
- "CIS8201",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Set up the interface mode */
- {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_VSC8211 = {
- 0xfc4b,
- "Vitesse VSC8211",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Set up the interface mode */
- {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_VSC8244 = {
- 0x3f1b,
- "Vitesse VSC8244",
- 6,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_VSC8641 = {
- 0x7043,
- "Vitesse VSC8641",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_VSC8221 = {
- 0xfc55,
- "Vitesse VSC8221",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_VSC8601 = {
- 0x00007042,
- "Vitesse VSC8601",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-#ifdef CONFIG_SYS_VSC8601_SKEWFIX
- {MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL},
-#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
- {MIIM_EXT_PAGE_ACCESS,1,NULL},
-#define VSC8101_SKEW \
- (CONFIG_SYS_VSC8601_SKEW_TX << 14) | (CONFIG_SYS_VSC8601_SKEW_RX << 12)
- {MIIM_VSC8601_SKEW_CTRL,VSC8101_SKEW,NULL},
- {MIIM_EXT_PAGE_ACCESS,0,NULL},
-#endif
-#endif
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESTART, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_dm9161 = {
- 0x0181b88,
- "Davicom DM9161E",
- 4,
- (struct phy_cmd[]) { /* config */
- {MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
- /* Do not bypass the scrambler/descrambler */
- {MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
- /* Clear 10BTCSR to default */
- {MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CR_INIT, NULL},
- /* Restart Auto Negotiation */
- {MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_DM9161_SCSR, miim_read, &mii_parse_dm9161_scsr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-/* micrel KSZ804 */
-static struct phy_info phy_info_ksz804 = {
- 0x0022151,
- "Micrel KSZ804 PHY",
- 4,
- (struct phy_cmd[]) { /* config */
- {MII_BMCR, BMCR_RESET, NULL},
- {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- {MII_BMSR, miim_read, NULL},
- {MII_BMSR, miim_read, &mii_parse_sr},
- {MII_BMSR, miim_read, &mii_parse_link},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- }
-};
-
-/* a generic flavor. */
-static struct phy_info phy_info_generic = {
- 0,
- "Unknown/Generic PHY",
- 32,
- (struct phy_cmd[]) { /* config */
- {MII_BMCR, BMCR_RESET, NULL},
- {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- {MII_BMSR, miim_read, NULL},
- {MII_BMSR, miim_read, &mii_parse_sr},
- {MII_BMSR, miim_read, &mii_parse_link},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- }
-};
-
-static uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
-{
- unsigned int speed;
- if (priv->link) {
- speed = mii_reg & MIIM_LXT971_SR2_SPEED_MASK;
-
- switch (speed) {
- case MIIM_LXT971_SR2_10HDX:
- priv->speed = 10;
- priv->duplexity = 0;
- break;
- case MIIM_LXT971_SR2_10FDX:
- priv->speed = 10;
- priv->duplexity = 1;
- break;
- case MIIM_LXT971_SR2_100HDX:
- priv->speed = 100;
- priv->duplexity = 0;
- break;
- default:
- priv->speed = 100;
- priv->duplexity = 1;
- }
- } else {
- priv->speed = 0;
- priv->duplexity = 0;
- }
-
- return 0;
-}
-
-static struct phy_info phy_info_lxt971 = {
- 0x0001378e,
- "LXT971",
- 4,
- (struct phy_cmd[]) { /* config */
- {MIIM_CR, MIIM_CR_INIT, mii_cr_init}, /* autonegotiate */
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup - enable interrupts */
- /* { 0x12, 0x00f2, NULL }, */
- {MIIM_STATUS, miim_read, NULL},
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- {MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown - disable interrupts */
- {miim_end,}
- },
-};
-
-/* Parse the DP83865's link and auto-neg status register for speed and duplex
- * information
- */
-static uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
-{
- switch (mii_reg & MIIM_DP83865_SPD_MASK) {
-
- case MIIM_DP83865_SPD_1000:
- priv->speed = 1000;
- break;
-
- case MIIM_DP83865_SPD_100:
- priv->speed = 100;
- break;
-
- default:
- priv->speed = 10;
- break;
-
- }
-
- if (mii_reg & MIIM_DP83865_DPX_FULL)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- return 0;
-}
-
-static struct phy_info phy_info_dp83865 = {
- 0x20005c7,
- "NatSemi DP83865",
- 4,
- (struct phy_cmd[]) { /* config */
- {MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the link and auto-neg status */
- {MIIM_DP83865_LANR, miim_read, &mii_parse_dp83865_lanr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_rtl8211b = {
- 0x001cc91,
- "RealTek RTL8211B",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_RTL8211B_PHY_STATUS, miim_read, &mii_parse_RTL8211B_sr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-struct phy_info phy_info_AR8021 = {
- 0x4dd04,
- "AR8021",
- 4,
- (struct phy_cmd[]) { /* config */
- {MII_BMCR, BMCR_RESET, NULL},
- {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
- {0x1d, 0x05, NULL},
- {0x1e, 0x3D47, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- {MII_BMSR, miim_read, NULL},
- {MII_BMSR, miim_read, &mii_parse_sr},
- {MII_BMSR, miim_read, &mii_parse_link},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- }
-};
-
-static struct phy_info *phy_info[] = {
- &phy_info_cis8204,
- &phy_info_cis8201,
- &phy_info_BCM5461S,
- &phy_info_BCM5464S,
- &phy_info_BCM5482S,
- &phy_info_M88E1011S,
- &phy_info_M88E1111S,
- &phy_info_M88E1118,
- &phy_info_M88E1121R,
- &phy_info_M88E1145,
- &phy_info_M88E1149S,
- &phy_info_dm9161,
- &phy_info_ksz804,
- &phy_info_lxt971,
- &phy_info_VSC8211,
- &phy_info_VSC8244,
- &phy_info_VSC8601,
- &phy_info_VSC8641,
- &phy_info_VSC8221,
- &phy_info_dp83865,
- &phy_info_rtl8211b,
- &phy_info_AR8021,
- &phy_info_generic, /* must be last; has ID 0 and 32 bit mask */
- NULL
-};
-
-/* Grab the identifier of the device's PHY, and search through
- * all of the known PHYs to see if one matches. If so, return
- * it, if not, return NULL
- */
-static struct phy_info *get_phy_info(struct eth_device *dev)
-{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- uint phy_reg, phy_ID;
- int i;
- struct phy_info *theInfo = NULL;
-
- /* Grab the bits from PHYIR1, and put them in the upper half */
- phy_reg = read_phy_reg(priv, MIIM_PHYIR1);
- phy_ID = (phy_reg & 0xffff) << 16;
-
- /* Grab the bits from PHYIR2, and put them in the lower half */
- phy_reg = read_phy_reg(priv, MIIM_PHYIR2);
- phy_ID |= (phy_reg & 0xffff);
-
- /* loop through all the known PHY types, and find one that */
- /* matches the ID we read from the PHY. */
- for (i = 0; phy_info[i]; i++) {
- if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) {
- theInfo = phy_info[i];
- break;
- }
- }
-
- if (theInfo == &phy_info_generic) {
- printf("%s: No support for PHY id %x; assuming generic\n",
- dev->name, phy_ID);
- } else {
- debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
- }
-
- return theInfo;
-}
-
-/* Execute the given series of commands on the given device's
- * PHY, running functions as necessary
- */
-static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
-{
- int i;
- uint result;
- tsec_mdio_t *phyregs = priv->phyregs;
-
- out_be32(&phyregs->miimcfg, MIIMCFG_RESET);
-
- out_be32(&phyregs->miimcfg, MIIMCFG_INIT_VALUE);
-
- while (in_be32(&phyregs->miimind) & MIIMIND_BUSY)
- ;
-
- for (i = 0; cmd->mii_reg != miim_end; i++) {
- if (cmd->mii_data == miim_read) {
- result = read_phy_reg(priv, cmd->mii_reg);
-
- if (cmd->funct != NULL)
- (*(cmd->funct)) (result, priv);
-
- } else {
- if (cmd->funct != NULL)
- result = (*(cmd->funct)) (cmd->mii_reg, priv);
- else
- result = cmd->mii_data;
-
- write_phy_reg(priv, cmd->mii_reg, result);
-
- }
- cmd++;
- }
-}
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
- && !defined(BITBANGMII)
-
-/*
- * Read a MII PHY register.
- *
- * Returns:
- * 0 on success
- */
-static int tsec_miiphy_read(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value)
-{
- unsigned short ret;
- struct tsec_private *priv = privlist[0];
-
- if (NULL == priv) {
- printf("Can't read PHY at address %d\n", addr);
- return -1;
- }
-
- ret = (unsigned short)tsec_local_mdio_read(priv->phyregs, addr, reg);
- *value = ret;
-
- return 0;
-}
-
-/*
- * Write a MII PHY register.
- *
- * Returns:
- * 0 on success
- */
-static int tsec_miiphy_write(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
-{
- struct tsec_private *priv = privlist[0];
-
- if (NULL == priv) {
- printf("Can't write PHY at address %d\n", addr);
- return -1;
- }
-
- tsec_local_mdio_write(priv->phyregs, addr, reg, value);
-
- return 0;
-}
-
-#endif
-
#ifdef CONFIG_MCAST_TFTP
/* CREDITS: linux gianfar driver, slightly adjusted... thanx. */
@@ -1635,14 +189,13 @@ static void init_registers(tsec_t *regs)
/* Configure maccfg2 based on negotiated speed and duplex
* reported by PHY handling code
*/
-static void adjust_link(struct eth_device *dev)
+static void adjust_link(struct tsec_private *priv, struct phy_device *phydev)
{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
tsec_t *regs = priv->regs;
u32 ecntrl, maccfg2;
- if (!priv->link) {
- printf("%s: No link.\n", dev->name);
+ if (!phydev->link) {
+ printf("%s: No link.\n", phydev->dev->name);
return;
}
@@ -1653,10 +206,10 @@ static void adjust_link(struct eth_device *dev)
maccfg2 = in_be32(&regs->maccfg2);
maccfg2 &= ~(MACCFG2_IF | MACCFG2_FULL_DUPLEX);
- if (priv->duplexity)
+ if (phydev->duplex)
maccfg2 |= MACCFG2_FULL_DUPLEX;
- switch (priv->speed) {
+ switch (phydev->speed) {
case 1000:
maccfg2 |= MACCFG2_GMII;
break;
@@ -1667,20 +220,20 @@ static void adjust_link(struct eth_device *dev)
/* Set R100 bit in all modes although
* it is only used in RGMII mode
*/
- if (priv->speed == 100)
+ if (phydev->speed == 100)
ecntrl |= ECNTRL_R100;
break;
default:
- printf("%s: Speed was bad\n", dev->name);
+ printf("%s: Speed was bad\n", phydev->dev->name);
break;
}
out_be32(&regs->ecntrl, ecntrl);
out_be32(&regs->maccfg2, maccfg2);
- printf("Speed: %d, %s duplex%s\n", priv->speed,
- (priv->duplexity) ? "full" : "half",
- (priv->flags & TSEC_FIBER) ? ", fiber mode" : "");
+ printf("Speed: %d, %s duplex%s\n", phydev->speed,
+ (phydev->duplex) ? "full" : "half",
+ (phydev->port == PORT_FIBRE) ? ", fiber mode" : "");
}
/* Set up the buffers and their descriptors, and bring up the
@@ -1692,6 +245,10 @@ static void startup_tsec(struct eth_device *dev)
struct tsec_private *priv = (struct tsec_private *)dev->priv;
tsec_t *regs = priv->regs;
+ /* reset the indices to zero */
+ rxIdx = 0;
+ txIdx = 0;
+
/* Point to the buffer descriptors */
out_be32(&regs->tbase, (unsigned int)(&rtx.txbd[txIdx]));
out_be32(&regs->rbase, (unsigned int)(&rtx.rxbd[rxIdx]));
@@ -1712,12 +269,6 @@ static void startup_tsec(struct eth_device *dev)
}
rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
- /* Start up the PHY */
- if (priv->phyinfo)
- phy_run_commands(priv, priv->phyinfo->startup);
-
- adjust_link(dev);
-
/* Enable Transmit and Receive */
setbits_be32(&regs->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN);
@@ -1822,8 +373,7 @@ static void tsec_halt(struct eth_device *dev)
clrbits_be32(&regs->maccfg1, MACCFG1_TX_EN | MACCFG1_RX_EN);
/* Shut down the PHY, as needed */
- if (priv->phyinfo)
- phy_run_commands(priv, priv->phyinfo->shutdown);
+ phy_shutdown(priv->phydev);
}
/* Initializes data structures and registers for the controller,
@@ -1862,20 +412,64 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
out_be32(&regs->macstnaddr2, tempval);
- /* reset the indices to zero */
- rxIdx = 0;
- txIdx = 0;
-
/* Clear out (for the most part) the other registers */
init_registers(regs);
/* Ready the device for tx/rx */
startup_tsec(dev);
+ /* Start up the PHY */
+ phy_startup(priv->phydev);
+
+ adjust_link(priv, priv->phydev);
+
/* If there's no link, fail */
- return priv->link ? 0 : -1;
+ return priv->phydev->link ? 0 : -1;
+}
+
+static phy_interface_t tsec_get_interface(struct tsec_private *priv)
+{
+ tsec_t *regs = priv->regs;
+ u32 ecntrl;
+
+ ecntrl = in_be32(&regs->ecntrl);
+
+ if (ecntrl & ECNTRL_SGMII_MODE)
+ return PHY_INTERFACE_MODE_SGMII;
+
+ if (ecntrl & ECNTRL_TBI_MODE) {
+ if (ecntrl & ECNTRL_REDUCED_MODE)
+ return PHY_INTERFACE_MODE_RTBI;
+ else
+ return PHY_INTERFACE_MODE_TBI;
+ }
+
+ if (ecntrl & ECNTRL_REDUCED_MODE) {
+ if (ecntrl & ECNTRL_REDUCED_MII_MODE)
+ return PHY_INTERFACE_MODE_RMII;
+ else {
+ phy_interface_t interface = priv->interface;
+
+ /*
+ * This isn't autodetected, so it must
+ * be set by the platform code.
+ */
+ if ((interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
+ (interface == PHY_INTERFACE_MODE_RGMII_RXID))
+ return interface;
+
+ return PHY_INTERFACE_MODE_RGMII;
+ }
+ }
+
+ if (priv->flags & TSEC_GIGABIT)
+ return PHY_INTERFACE_MODE_GMII;
+
+ return PHY_INTERFACE_MODE_MII;
}
+
/* Discover which PHY is attached to the device, and configure it
* properly. If the PHY is not recognized, then return 0
* (failure). Otherwise, return 1
@@ -1883,35 +477,32 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
static int init_phy(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- struct phy_info *curphy;
+ struct phy_device *phydev;
tsec_t *regs = priv->regs;
+ u32 supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full);
+
+ if (priv->flags & TSEC_GIGABIT)
+ supported |= SUPPORTED_1000baseT_Full;
/* Assign a Physical address to the TBI */
out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
- /* Reset MII (due to new addresses) */
- out_be32(&priv->phyregs->miimcfg, MIIMCFG_RESET);
- out_be32(&priv->phyregs->miimcfg, MIIMCFG_INIT_VALUE);
- while (in_be32(&priv->phyregs->miimind) & MIIMIND_BUSY)
- ;
-
- /* Get the cmd structure corresponding to the attached
- * PHY */
- curphy = get_phy_info(dev);
+ priv->interface = tsec_get_interface(priv);
- if (curphy == NULL) {
- priv->phyinfo = NULL;
- printf("%s: No PHY found\n", dev->name);
+ if (priv->interface == PHY_INTERFACE_MODE_SGMII)
+ tsec_configure_serdes(priv);
- return 0;
- }
+ phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface);
- if (in_be32(&regs->ecntrl) & ECNTRL_SGMII_MODE)
- tsec_configure_serdes(priv);
+ phydev->supported &= supported;
+ phydev->advertising = phydev->supported;
- priv->phyinfo = curphy;
+ priv->phydev = phydev;
- phy_run_commands(priv, priv->phyinfo->config);
+ phy_config(phydev);
return 1;
}
@@ -1939,13 +530,14 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info)
privlist[num_tsecs++] = priv;
priv->regs = tsec_info->regs;
- priv->phyregs = tsec_info->miiregs;
priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
priv->phyaddr = tsec_info->phyaddr;
priv->flags = tsec_info->flags;
sprintf(dev->name, tsec_info->devname);
+ priv->interface = tsec_info->interface;
+ priv->bus = miiphy_get_dev_by_name(tsec_info->mii_devname);
dev->iobase = 0;
dev->priv = priv;
dev->init = tsec_init;
@@ -1967,11 +559,6 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info)
udelay(2); /* Soft Reset must be asserted for 3 TX clocks */
clrbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
- && !defined(BITBANGMII)
- miiphy_register(dev->name, tsec_miiphy_read, tsec_miiphy_write);
-#endif
-
/* Try to initialize PHY here, and return */
return init_phy(dev);
}
@@ -1997,6 +584,13 @@ int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num)
int tsec_standard_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info info;
+
+ info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ info.name = DEFAULT_MII_NAME;
+
+ fsl_pq_mdio_init(bis, &info);
+
return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info));
}
diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h
new file mode 100644
index 0000000..17ca79c
--- /dev/null
+++ b/include/fsl_mdio.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Jun-jie Zhang <b18070@freescale.com>
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __FSL_PHY_H__
+#define __FSL_PHY_H__
+
+#include <net.h>
+#include <miiphy.h>
+#include <asm/fsl_enet.h>
+
+/* PHY register offsets */
+#define PHY_EXT_PAGE_ACCESS 0x1f
+
+/* MII Management Configuration Register */
+#define MIIMCFG_RESET_MGMT 0x80000000
+#define MIIMCFG_MGMT_CLOCK_SELECT 0x00000007
+#define MIIMCFG_INIT_VALUE 0x00000003
+
+/* MII Management Command Register */
+#define MIIMCOM_READ_CYCLE 0x00000001
+#define MIIMCOM_SCAN_CYCLE 0x00000002
+
+/* MII Management Address Register */
+#define MIIMADD_PHY_ADDR_SHIFT 8
+
+/* MII Management Indicator Register */
+#define MIIMIND_BUSY 0x00000001
+#define MIIMIND_NOTVALID 0x00000004
+
+void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
+ int dev_addr, int reg, int value);
+int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
+ int dev_addr, int regnum);
+int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum);
+int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
+ u16 value);
+
+struct fsl_pq_mdio_info {
+ struct tsec_mii_mng *regs;
+ char *name;
+};
+int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info);
+
+#endif /* __FSL_PHY_H__ */
+
diff --git a/include/tsec.h b/include/tsec.h
index a066d97..8ed30ac 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -19,30 +19,36 @@
#include <net.h>
#include <config.h>
+#include <phy.h>
+#include <asm/fsl_enet.h>
#define TSEC_SIZE 0x01000
#define TSEC_MDIO_OFFSET 0x01000
+#define CONFIG_SYS_MDIO_BASE_ADDR (TSEC_BASE_ADDR + 0x520)
+
+#define DEFAULT_MII_NAME "FSL_MDIO"
+
#define STD_TSEC_INFO(num) \
{ \
.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
- .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \
- .miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+ .miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
+ (num - 1) * TSEC_MDIO_OFFSET), \
.devname = CONFIG_TSEC##num##_NAME, \
.phyaddr = TSEC##num##_PHY_ADDR, \
- .flags = TSEC##num##_FLAGS \
+ .flags = TSEC##num##_FLAGS, \
+ .mii_devname = DEFAULT_MII_NAME \
}
#define SET_STD_TSEC_INFO(x, num) \
{ \
x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
- x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \
- x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+ x.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
+ (num - 1) * TSEC_MDIO_OFFSET); \
x.devname = CONFIG_TSEC##num##_NAME; \
x.phyaddr = TSEC##num##_PHY_ADDR; \
x.flags = TSEC##num##_FLAGS;\
+ x.mii_devname = DEFAULT_MII_NAME;\
}
#define MAC_ADDR_LEN 6
@@ -51,8 +57,6 @@
#define TSEC_TIMEOUT 1000
#define TOUT_LOOP 1000000
-#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */
-
/* TBI register addresses */
#define TBI_CR 0x00
#define TBI_SR 0x01
@@ -96,204 +100,14 @@
#define ECNTRL_INIT_SETTINGS 0x00001000
#define ECNTRL_TBI_MODE 0x00000020
+#define ECNTRL_REDUCED_MODE 0x00000010
#define ECNTRL_R100 0x00000008
+#define ECNTRL_REDUCED_MII_MODE 0x00000004
#define ECNTRL_SGMII_MODE 0x00000002
-#define miim_end -2
-#define miim_read -1
-
#ifndef CONFIG_SYS_TBIPA_VALUE
#define CONFIG_SYS_TBIPA_VALUE 0x1f
#endif
-#define MIIMCFG_INIT_VALUE 0x00000003
-#define MIIMCFG_RESET 0x80000000
-
-#define MIIMIND_BUSY 0x00000001
-#define MIIMIND_NOTVALID 0x00000004
-
-#define MIIM_CONTROL 0x00
-#define MIIM_CONTROL_RESET 0x00009140
-#define MIIM_CONTROL_INIT 0x00001140
-#define MIIM_CONTROL_RESTART 0x00001340
-#define MIIM_ANEN 0x00001000
-
-#define MIIM_CR 0x00
-#define MIIM_CR_RST 0x00008000
-#define MIIM_CR_INIT 0x00001000
-
-#define MIIM_STATUS 0x1
-#define MIIM_STATUS_AN_DONE 0x00000020
-#define MIIM_STATUS_LINK 0x0004
-
-#define MIIM_PHYIR1 0x2
-#define MIIM_PHYIR2 0x3
-
-#define MIIM_ANAR 0x4
-#define MIIM_ANAR_INIT 0x1e1
-
-#define MIIM_TBI_ANLPBPA 0x5
-#define MIIM_TBI_ANLPBPA_HALF 0x00000040
-#define MIIM_TBI_ANLPBPA_FULL 0x00000020
-
-#define MIIM_TBI_ANEX 0x6
-#define MIIM_TBI_ANEX_NP 0x00000004
-#define MIIM_TBI_ANEX_PRX 0x00000002
-
-#define MIIM_GBIT_CONTROL 0x9
-#define MIIM_GBIT_CONTROL_INIT 0xe00
-
-#define MIIM_EXT_PAGE_ACCESS 0x1f
-
-/* Broadcom BCM54xx -- taken from linux sungem_phy */
-#define MIIM_BCM54xx_AUXCNTL 0x18
-#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) ((val & 0x7) << 12)|(val & 0x7)
-#define MIIM_BCM54xx_AUXSTATUS 0x19
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
-
-#define MIIM_BCM54XX_SHD 0x1c /* 0x1c shadow registers */
-#define MIIM_BCM54XX_SHD_WRITE 0x8000
-#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
-#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
-#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \
- (MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
- MIIM_BCM54XX_SHD_DATA(data))
-
-#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
-#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
-#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
-#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
-
-/* Cicada Auxiliary Control/Status Register */
-#define MIIM_CIS8201_AUX_CONSTAT 0x1c
-#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004
-#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020
-#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018
-#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010
-#define MIIM_CIS8201_AUXCONSTAT_100 0x0008
-
-/* Cicada Extended Control Register 1 */
-#define MIIM_CIS8201_EXT_CON1 0x17
-#define MIIM_CIS8201_EXTCON1_INIT 0x0000
-
-/* Cicada 8204 Extended PHY Control Register 1 */
-#define MIIM_CIS8204_EPHY_CON 0x17
-#define MIIM_CIS8204_EPHYCON_INIT 0x0006
-#define MIIM_CIS8204_EPHYCON_RGMII 0x1100
-
-/* Cicada 8204 Serial LED Control Register */
-#define MIIM_CIS8204_SLED_CON 0x1b
-#define MIIM_CIS8204_SLEDCON_INIT 0x1115
-
-#define MIIM_GBIT_CON 0x09
-#define MIIM_GBIT_CON_ADVERT 0x0e00
-
-/* Entry for Vitesse VSC8244 regs starts here */
-/* Vitesse VSC8244 Auxiliary Control/Status Register */
-#define MIIM_VSC8244_AUX_CONSTAT 0x1c
-#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000
-#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020
-#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018
-#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010
-#define MIIM_VSC8244_AUXCONSTAT_100 0x0008
-#define MIIM_CONTROL_INIT_LOOPBACK 0x4000
-
-/* Vitesse VSC8244 Extended PHY Control Register 1 */
-#define MIIM_VSC8244_EPHY_CON 0x17
-#define MIIM_VSC8244_EPHYCON_INIT 0x0006
-
-/* Vitesse VSC8244 Serial LED Control Register */
-#define MIIM_VSC8244_LED_CON 0x1b
-#define MIIM_VSC8244_LEDCON_INIT 0xF011
-
-/* Entry for Vitesse VSC8601 regs starts here (Not complete) */
-/* Vitesse VSC8601 Extended PHY Control Register 1 */
-#define MIIM_VSC8601_EPHY_CON 0x17
-#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120
-#define MIIM_VSC8601_SKEW_CTRL 0x1c
-
-/* 88E1011 PHY Status Register */
-#define MIIM_88E1011_PHY_STATUS 0x11
-#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
-#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
-#define MIIM_88E1011_PHYSTAT_100 0x4000
-#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
-#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
-#define MIIM_88E1011_PHYSTAT_LINK 0x0400
-
-#define MIIM_88E1011_PHY_SCR 0x10
-#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060
-
-/* 88E1111 PHY LED Control Register */
-#define MIIM_88E1111_PHY_LED_CONTROL 24
-#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
-#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
-
-/* 88E1121 PHY LED Control Register */
-#define MIIM_88E1121_PHY_LED_CTRL 16
-#define MIIM_88E1121_PHY_LED_PAGE 3
-#define MIIM_88E1121_PHY_LED_DEF 0x0030
-
-/* 88E1121 PHY IRQ Enable/Status Register */
-#define MIIM_88E1121_PHY_IRQ_EN 18
-#define MIIM_88E1121_PHY_IRQ_STATUS 19
-
-#define MIIM_88E1121_PHY_PAGE 22
-
-/* 88E1145 Extended PHY Specific Control Register */
-#define MIIM_88E1145_PHY_EXT_CR 20
-#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080
-#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002
-
-#define MIIM_88E1145_PHY_PAGE 29
-#define MIIM_88E1145_PHY_CAL_OV 30
-
-/* RTL8211B PHY Status Register */
-#define MIIM_RTL8211B_PHY_STATUS 0x11
-#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000
-#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000
-#define MIIM_RTL8211B_PHYSTAT_100 0x4000
-#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000
-#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800
-#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400
-
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP 0x0400
-#define MIIM_DM9161_CR_RSTAN 0x1200
-
-#define MIIM_DM9161_SCR 0x10
-#define MIIM_DM9161_SCR_INIT 0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR 0x11
-#define MIIM_DM9161_SCSR_100F 0x8000
-#define MIIM_DM9161_SCSR_100H 0x4000
-#define MIIM_DM9161_SCSR_10F 0x2000
-#define MIIM_DM9161_SCSR_10H 0x1000
-
-/* DM9161 10BT Configuration/Status */
-#define MIIM_DM9161_10BTCSR 0x12
-#define MIIM_DM9161_10BTCSR_INIT 0x7800
-
-/* LXT971 Status 2 registers */
-#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */
-#define MIIM_LXT971_SR2_SPEED_MASK 0x4200
-#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */
-#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */
-
-/* DP83865 Control register values */
-#define MIIM_DP83865_CR_INIT 0x9200
-
-/* DP83865 Link and Auto-Neg Status Register */
-#define MIIM_DP83865_LANR 0x11
-#define MIIM_DP83865_SPD_MASK 0x0018
-#define MIIM_DP83865_SPD_1000 0x0010
-#define MIIM_DP83865_SPD_100 0x0008
-#define MIIM_DP83865_DPX_FULL 0x0002
-
-#define MIIM_READ_COMMAND 0x00000001
#define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN
@@ -467,22 +281,6 @@ typedef struct tsec_hash_regs
uint res2[24];
} tsec_hash_t;
-typedef struct tsec_mdio {
- uint res1[4];
- uint ieventm;
- uint imaskm;
- uint res2;
- uint emapm;
- uint res3[320];
- uint miimcfg; /* MII Management: Configuration */
- uint miimcom; /* MII Management: Command */
- uint miimadd; /* MII Management: Address */
- uint miimcon; /* MII Management: Control */
- uint miimstat; /* MII Management: Status */
- uint miimind; /* MII Management: Indicators */
- uint res4[690];
-} tsec_mdio_t;
-
typedef struct tsec
{
/* General Control and Status Registers (0x2_n000) */
@@ -578,79 +376,29 @@ typedef struct tsec
uint resc00[256];
} tsec_t;
-#define TSEC_GIGABIT (1)
+#define TSEC_GIGABIT (1 << 0)
-/* This flag currently only has
- * meaning if we're using the eTSEC */
+/* These flags currently only have meaning if we're using the eTSEC */
#define TSEC_REDUCED (1 << 1) /* MAC-PHY interface uses RGMII */
#define TSEC_SGMII (1 << 2) /* MAC-PHY interface uses SGMII */
-#define TSEC_FIBER (1 << 3) /* PHY uses fiber, eg 1000 Base-X */
struct tsec_private {
tsec_t *regs;
- tsec_mdio_t *phyregs;
- tsec_mdio_t *phyregs_sgmii;
- struct phy_info *phyinfo;
+ struct tsec_mii_mng *phyregs_sgmii;
+ struct phy_device *phydev;
+ phy_interface_t interface;
+ struct mii_dev *bus;
uint phyaddr;
+ char mii_devname[16];
u32 flags;
- uint link;
- uint duplexity;
- uint speed;
-};
-
-
-/*
- * struct phy_cmd: A command for reading or writing a PHY register
- *
- * mii_reg: The register to read or write
- *
- * mii_data: For writes, the value to put in the register.
- * A value of -1 indicates this is a read.
- *
- * funct: A function pointer which is invoked for each command.
- * For reads, this function will be passed the value read
- * from the PHY, and process it.
- * For writes, the result of this function will be written
- * to the PHY register
- */
-struct phy_cmd {
- uint mii_reg;
- uint mii_data;
- uint (*funct) (uint mii_reg, struct tsec_private * priv);
-};
-
-/* struct phy_info: a structure which defines attributes for a PHY
- *
- * id will contain a number which represents the PHY. During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is. The 32-bit result
- * gotten from the PHY will be shifted right by "shift" bits to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * The struct phy_cmd entries represent pointers to an arrays of
- * commands which tell the driver what to do to the PHY.
- */
-struct phy_info {
- uint id;
- char *name;
- uint shift;
- /* Called to configure the PHY, and modify the controller
- * based on the results */
- struct phy_cmd *config;
-
- /* Called when starting up the controller */
- struct phy_cmd *startup;
-
- /* Called when bringing down the controller */
- struct phy_cmd *shutdown;
};
struct tsec_info_struct {
tsec_t *regs;
- tsec_mdio_t *miiregs;
- tsec_mdio_t *miiregs_sgmii;
+ struct tsec_mii_mng *miiregs_sgmii;
char *devname;
+ char *mii_devname;
+ phy_interface_t interface;
unsigned int phyaddr;
u32 flags;
};