mmc: sdhci: remove the unnecessary arguments for sdhci_setup_cfg

Some arguments don't need to pass to sdhci_setup_cfg.
Generic variable can be used in sdhci_setup_cfg, and some arguments are
already included in sdhci_host struct.

It's enough that just pass the board specific things to sdhci_setup_cfg().
After removing the unnecessary arguments, it's more simpler than before.
It doesn't consider "Version" and "Capabilities" anymore in each SoC
driver.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

5 files changed, 22 insertions, 34 deletions

diff --git a/drivers/mmc/msm_sdhci.c b/drivers/mmc/msm_sdhci.c
index e90a044..a8cb9e2 100644
--- a/drivers/mmc/msm_sdhci.c
+++ b/drivers/mmc/msm_sdhci.c
@@ -143,9 +143,7 @@ static int msm_sdc_probe(struct udevice *dev)
 	/* Set host controller version */
 	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
 
-	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
-	ret = sdhci_setup_cfg(&plat->cfg, dev->name, caps,
-			0, 0, host->version, host->quirks, 0);
+	ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
 	host->mmc = &plat->mmc;
 	if (ret)
 		return ret;
diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c
index 023c29b..624029b 100644
--- a/drivers/mmc/rockchip_sdhci.c
+++ b/drivers/mmc/rockchip_sdhci.c
@@ -33,15 +33,11 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	struct rockchip_sdhc *prv = dev_get_priv(dev);
 	struct sdhci_host *host = &prv->host;
 	int ret;
-	u32 caps;
 
-	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
 	host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD;
 
-	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
-	ret = sdhci_setup_cfg(&plat->cfg, dev->name, host->bus_width,
-			caps, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ, EMMC_MIN_FREQ,
-			host->version, host->quirks, 0);
+	ret = sdhci_setup_cfg(&plat->cfg, host, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ,
+			EMMC_MIN_FREQ);
 
 	host->mmc = &plat->mmc;
 	if (ret)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index c275314..60108fd 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -511,18 +511,22 @@ static const struct mmc_ops sdhci_ops = {
 };
 #endif
 
-int sdhci_setup_cfg(struct mmc_config *cfg, const char *name,
-		    uint caps, u32 max_clk, u32 min_clk, uint version,
-		    uint quirks, uint host_caps)
+int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
+		u32 max_clk, u32 min_clk)
 {
-	cfg->name = name;
+	u32 caps;
+
+	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+
+	cfg->name = host->name;
 #ifndef CONFIG_DM_MMC_OPS
 	cfg->ops = &sdhci_ops;
 #endif
 	if (max_clk)
 		cfg->f_max = max_clk;
 	else {
-		if (version >= SDHCI_SPEC_300)
+		if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
 			cfg->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK) >>
 				SDHCI_CLOCK_BASE_SHIFT;
 		else
@@ -535,7 +539,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, const char *name,
 	if (min_clk)
 		cfg->f_min = min_clk;
 	else {
-		if (version >= SDHCI_SPEC_300)
+		if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
 			cfg->f_min = cfg->f_max / SDHCI_MAX_DIV_SPEC_300;
 		else
 			cfg->f_min = cfg->f_max / SDHCI_MAX_DIV_SPEC_200;
@@ -549,13 +553,13 @@ int sdhci_setup_cfg(struct mmc_config *cfg, const char *name,
 		cfg->voltages |= MMC_VDD_165_195;
 
 	cfg->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
-	if (version >= SDHCI_SPEC_300) {
+	if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
 		if (caps & SDHCI_CAN_DO_8BIT)
 			cfg->host_caps |= MMC_MODE_8BIT;
 	}
 
-	if (host_caps)
-		cfg->host_caps |= host_caps;
+	if (host->host_caps)
+		cfg->host_caps |= host->host_caps;
 
 
 	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
@@ -582,9 +586,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
 	}
 #endif
 
-	if (sdhci_setup_cfg(&host->cfg, host->name, caps,
-			    max_clk, min_clk, SDHCI_GET_VERSION(host),
-			    host->quirks, host->host_caps)) {
+	if (sdhci_setup_cfg(&host->cfg, host, max_clk, min_clk)) {
 		printf("%s: Hardware doesn't specify base clock frequency\n",
 		       __func__);
 		return -EINVAL;
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 69d6151..bf54219 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -40,10 +40,8 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
 
 	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
-	ret = sdhci_setup_cfg(&plat->cfg, dev->name,
-			      caps, CONFIG_ZYNQ_SDHCI_MAX_FREQ,
-			      CONFIG_ZYNQ_SDHCI_MIN_FREQ, host->version,
-			      host->quirks, 0);
+	ret = sdhci_setup_cfg(&plat->cfg, host, CONFIG_ZYNQ_SDHCI_MAX_FREQ,
+			      CONFIG_ZYNQ_SDHCI_MIN_FREQ);
 	host->mmc = &plat->mmc;
 	if (ret)
 		return ret;
diff --git a/include/sdhci.h b/include/sdhci.h
index 693ecc1..fcef4dc 100644
--- a/include/sdhci.h
+++ b/include/sdhci.h
@@ -367,18 +367,12 @@ static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
  * See msm_sdhci.c for an example.
  *
  * @cfg:	Configuration structure to fill in (generally &plat->mmc)
- * @name:	Device name (normally dev->name)
- * @caps:	Host capabilities (MMC_MODE_...)
+ * @host:	SDHCI host structure
  * @max_clk:	Maximum supported clock speed in HZ (0 for default)
  * @min_clk:	Minimum supported clock speed in HZ (0 for default)
- * @version:	Host controller version (generally read from the
- *		SDHCI_HOST_VERSION register)
- * @quirks:	Quick flags (SDHCI_QUIRK_...)
- * @host_caps:	Additional host capabilities (0 if none)
  */
-int sdhci_setup_cfg(struct mmc_config *cfg, const char *name,
-		    uint caps, u32 max_clk, u32 min_clk, uint version,
-		    uint quirks, uint host_caps);
+int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
+		    u32 max_clk, u32 min_clk);
 
 /**
  * sdhci_bind() - Set up a new MMC block device