powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)

The work-around for P4080 erratum SERDES9 says that the SERDES receiver
lanes should be reset after the XAUI starts tranmitting alignment signals.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

4 files changed, 35 insertions, 19 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 07e58ed..89ed5b4 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -504,9 +504,6 @@ void fsl_serdes_init(void)
 	const char *srds_lpd_arg;
 	size_t arglen;
 #endif
-#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
-	enum srds_prtcl device;
-#endif
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001
 	int need_serdes_a001;	/* TRUE == need work-around for SERDES A001 */
 #endif
@@ -787,11 +784,4 @@ void fsl_serdes_init(void)
 			     SRDS_RSTCTL_SDPD);
 	}
 #endif
-
-#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
-	for (device = XAUI_FM1; device <= XAUI_FM2; device++) {
-		if (is_serdes_configured(device))
-			__serdes_reset_rx(srds_regs, cfg, device);
-	}
-#endif
 }
diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c
index 00dfa9a..7ff00d1 100644
--- a/board/freescale/corenet_ds/eth_p4080.c
+++ b/board/freescale/corenet_ds/eth_p4080.c
@@ -93,21 +93,43 @@ struct mii_dev *mii_dev_for_muxval(u32 muxval)
 	return bus;
 }
 
-#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
+#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES9) && defined(CONFIG_PHY_TERANETICS)
 int board_phy_config(struct phy_device *phydev)
 {
-	/*
-	 * If this is the 10G PHY, and we switched it to fiber,
-	 * we need to reset the serdes link for SERDES9
-	 */
-	if ((phydev->port == PORT_FIBRE) && (phydev->drv->uid == 0x00a19410)) {
+	if (phydev->drv->uid == PHY_UID_TN2020) {
+		unsigned long timeout = 1 * 1000; /* 1 seconds */
 		enum srds_prtcl device;
 
+		/*
+		 * Wait for the XAUI to come out of reset.  This is when it
+		 * starts transmitting alignment signals.
+		 */
+		while (--timeout) {
+			int reg = phy_read(phydev, MDIO_MMD_PHYXS, MDIO_CTRL1);
+			if (reg < 0) {
+				printf("TN2020: Error reading from PHY at "
+				       "address %u\n", phydev->addr);
+				break;
+			}
+			/*
+			 * Note that we've never actually seen
+			 * MDIO_CTRL1_RESET set to 1.
+			 */
+			if ((reg & MDIO_CTRL1_RESET) == 0)
+				break;
+			udelay(1000);
+		}
+
+		if (!timeout) {
+			printf("TN2020: Timeout waiting for PHY at address %u "
+			       " to reset.\n", phydev->addr);
+		}
+
 		switch (phydev->addr) {
-		case 4:
+		case CONFIG_SYS_FM1_10GEC1_PHY_ADDR:
 			device = XAUI_FM1;
 			break;
-		case 0:
+		case CONFIG_SYS_FM2_10GEC1_PHY_ADDR:
 			device = XAUI_FM2;
 			break;
 		default:
diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
index 9d9397a..78447b7 100644
--- a/drivers/net/phy/teranetics.c
+++ b/drivers/net/phy/teranetics.c
@@ -95,7 +95,7 @@ int tn2020_startup(struct phy_device *phydev)
 
 struct phy_driver tn2020_driver = {
 	.name = "Teranetics TN2020",
-	.uid = 0x00a19410,
+	.uid = PHY_UID_TN2020,
 	.mask = 0xfffffff0,
 	.features = PHY_10G_FEATURES,
 	.mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
diff --git a/include/phy.h b/include/phy.h
index d5817bf..095f41c 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -226,4 +226,8 @@ int phy_natsemi_init(void);
 int phy_realtek_init(void);
 int phy_teranetics_init(void);
 int phy_vitesse_init(void);
+
+/* PHY UIDs for various PHYs that are referenced in external code */
+#define PHY_UID_TN2020	0x00a19410
+
 #endif