mpc8260: remove gw8260 board support

This board is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Oliver Brown <obrown@adventnetworks.com>

9 files changed, 1 insertions, 1971 deletions

diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig
index 56b79ac..59e2bed 100644
--- a/arch/powerpc/cpu/mpc8260/Kconfig
+++ b/arch/powerpc/cpu/mpc8260/Kconfig
@@ -19,9 +19,6 @@ config TARGET_CPU87
 config TARGET_EP82XXM
 	bool "Support ep82xxm"
 
-config TARGET_GW8260
-	bool "Support gw8260"
-
 config TARGET_KM82XX
 	bool "Support km82xx"
 
@@ -31,7 +28,6 @@ source "board/atc/Kconfig"
 source "board/cpu86/Kconfig"
 source "board/cpu87/Kconfig"
 source "board/ep82xxm/Kconfig"
-source "board/gw8260/Kconfig"
 source "board/keymile/km82xx/Kconfig"
 
 endmenu
diff --git a/board/gw8260/Kconfig b/board/gw8260/Kconfig
deleted file mode 100644
index 1d6aa80..0000000
--- a/board/gw8260/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_GW8260
-
-config SYS_BOARD
-	default "gw8260"
-
-config SYS_CONFIG_NAME
-	default "gw8260"
-
-endif
diff --git a/board/gw8260/MAINTAINERS b/board/gw8260/MAINTAINERS
deleted file mode 100644
index 5268d19..0000000
--- a/board/gw8260/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-GW8260 BOARD
-M:	Oliver Brown <obrown@adventnetworks.com>
-S:	Maintained
-F:	board/gw8260/
-F:	include/configs/gw8260.h
-F:	configs/gw8260_defconfig
diff --git a/board/gw8260/Makefile b/board/gw8260/Makefile
deleted file mode 100644
index 2e23f39..0000000
--- a/board/gw8260/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= gw8260.o flash.o
diff --git a/board/gw8260/flash.c b/board/gw8260/flash.c
deleted file mode 100644
index 0c4a943..0000000
--- a/board/gw8260/flash.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * (C) Copyright 2000
- * Marius Groeger <mgroeger@sysgo.de>
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- *
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Oliver Brown <oliverb@alumni.utexas.net>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*********************************************************************/
-/* DESCRIPTION:
- *   This file contains the flash routines for the GW8260 board.
- *
- *
- *
- * MODULE DEPENDENCY:
- *   None
- *
- *
- * RESTRICTIONS/LIMITATIONS:
- *
- *   Only supports the following flash devices:
- *     AMD 29F080B
- *     AMD 29F016D
- *
- * Copyright (c) 2001, Advent Networks, Inc.
- *
- */
-/*********************************************************************/
-
-#include <common.h>
-#include <mpc8260.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-/*********************************************************************/
-/*		      functions					     */
-/*********************************************************************/
-
-/*
- * NAME: flash_init() -	 initializes flash banks
- *
- * DESCRIPTION:
- *   This function initializes the flash bank(s).
- *
- * RETURNS:
- *   The size in bytes of the flash
- *
- * RESTRICTIONS/LIMITATIONS:
- *
- *
- */
-unsigned long flash_init(void)
-{
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-
-	/* for now, only support the 4 MB Flash SIMM */
-	(void)flash_get_size((vu_long *) CONFIG_SYS_FLASH0_BASE,
-			      &flash_info[0]);
-	/*
-	 * protect monitor and environment sectors
-	 */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-		      &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-#ifndef CONFIG_ENV_SIZE
-#define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
-#endif
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-
-	return CONFIG_SYS_FLASH0_SIZE * 1024 * 1024;	/*size */
-}
-
-/*********************************************************************/
-/* NAME: flash_print_info() - prints flash imformation		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   This function prints the flash information.		     */
-/*								     */
-/* INPUTS:							     */
-/*   flash_info_t *info - flash information structure		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays flash information to console			     */
-/*								     */
-/* RETURNS:							     */
-/*   None							     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-void flash_print_info  (flash_info_t *info)
-{
-    int i;
-
-    if (info->flash_id == FLASH_UNKNOWN) {
-	printf ("missing or unknown FLASH type\n");
-	return;
-    }
-
-    switch ((info->flash_id >> 16) & 0xff) {
-    case 0x1:
-	printf ("AMD ");
-	break;
-    default:
-	printf ("Unknown Vendor ");
-	break;
-    }
-
-    switch (info->flash_id & FLASH_TYPEMASK) {
-    case AMD_ID_F040B:
-	printf ("AM29F040B (4 Mbit)\n");
-	break;
-    case AMD_ID_F080B:
-	printf ("AM29F080B (8 Mbit)\n");
-	break;
-    case AMD_ID_F016D:
-	printf ("AM29F016D (16 Mbit)\n");
-	break;
-    default:
-	printf ("Unknown Chip Type\n");
-	break;
-    }
-
-    printf ("  Size: %ld MB in %d Sectors\n",
-	    info->size >> 20, info->sector_count);
-
-    printf ("  Sector Start Addresses:");
-    for (i=0; i<info->sector_count; ++i) {
-	if ((i % 5) == 0)
-	    printf ("\n	  ");
-	printf (" %08lX%s",
-		info->start[i],
-		info->protect[i] ? " (RO)" : "	   "
-	    );
-    }
-    printf ("\n");
-    return;
-}
-
-/*********************************************************************/
-/*   The following code cannot be run from FLASH!		     */
-/*********************************************************************/
-
-/*********************************************************************/
-/* NAME: flash_get_size() - detects the flash size		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   1) Reads vendor ID and devices ID from the flash devices.	     */
-/*   2) Initializes flash info struct.				     */
-/*   3) Return the flash size					     */
-/*								     */
-/* INPUTS:							     */
-/*   vu_long *addr	- pointer to start of flash		     */
-/*   flash_info_t *info - flash information structure		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   None							     */
-/*								     */
-/* RETURNS:							     */
-/*   Size of the flash in bytes, or 0 if device id is unknown.	     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*   Only supports the following devices:			     */
-/*     AM29F080D						     */
-/*     AM29F016D						     */
-/*								     */
-/*********************************************************************/
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-    short i;
-    vu_long vendor, devid;
-    ulong base = (ulong)addr;
-
-    /*printf("addr   = %08lx\n", (unsigned long)addr); */
-
-    /* Reset and Write auto select command: read Manufacturer ID */
-    addr[0x0000] = 0xf0f0f0f0;
-    addr[0x0555] = 0xAAAAAAAA;
-    addr[0x02AA] = 0x55555555;
-    addr[0x0555] = 0x90909090;
-    udelay (1000);
-
-    vendor = addr[0];
-    /*printf("vendor = %08lx\n", vendor); */
-    if (vendor != 0x01010101) {
-	info->size = 0;
-	goto out;
-    }
-
-    devid = addr[1];
-    /*printf("devid  = %08lx\n", devid); */
-
-    if ((devid & 0xff) == AMD_ID_F080B) {
-	info->flash_id	   = (vendor & 0xff) << 16 | AMD_ID_F080B;
-	/* we have 16 sectors with 64KB each x 4 */
-	info->sector_count = 16;
-	info->size	   = 4 * info->sector_count * 64*1024;
-    } else if ((devid & 0xff) == AMD_ID_F016D){
-	info->flash_id	   = (vendor & 0xff) << 16 | AMD_ID_F016D;
-	/* we have 32 sectors with 64KB each x 4 */
-	info->sector_count = 32;
-	info->size	   = 4 * info->sector_count * 64*1024;
-    } else {
-	info->size = 0;
-	goto out;
-    }
-    /*printf("sector count = %08x\n", info->sector_count); */
-    /* check for protected sectors */
-    for (i = 0; i < info->sector_count; i++) {
-	/* sector base address */
-	info->start[i] = base + i * (info->size / info->sector_count);
-	/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-	/* D0 = 1 if protected */
-	addr = (volatile unsigned long *)(info->start[i]);
-	info->protect[i] = addr[2] & 1;
-    }
-
-    /* reset command */
-    addr = (vu_long *)info->start[0];
-
-  out:
-    addr[0] = 0xf0f0f0f0;
-
-    /*printf("size = %08x\n", info->size); */
-    return info->size;
-}
-
-/*********************************************************************/
-/* NAME: flash_erase() - erases flash by sector			     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   This function erases flash sectors starting for s_first to	     */
-/*   s_last.							     */
-/*								     */
-/* INPUTS:							     */
-/*   flash_info_t *info - flash information structure		     */
-/*   int s_first - first sector to erase			     */
-/*   int s_last	 - last sector to erase				     */
-/*								     */
-/* OUTPUTS:							     */
-/*   None							     */
-/*								     */
-/* RETURNS:							     */
-/*   Returns 0 for success, 1 for failure.			     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*********************************************************************/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-    vu_long *addr = (vu_long*)(info->start[0]);
-    int flag, prot, sect, l_sect;
-    ulong start, now, last;
-
-    if ((s_first < 0) || (s_first > s_last)) {
-	if (info->flash_id == FLASH_UNKNOWN) {
-	    printf ("- missing\n");
-	} else {
-	    printf ("- no sectors to erase\n");
-	}
-	return 1;
-    }
-
-    prot = 0;
-    for (sect = s_first; sect <= s_last; sect++) {
-	if (info->protect[sect]) {
-	    prot++;
-	}
-    }
-
-    if (prot) {
-	printf ("- Warning: %d protected sectors will not be erased!\n",
-		prot);
-    } else {
-	printf ("\n");
-    }
-
-    l_sect = -1;
-
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    addr[0x0555] = 0xAAAAAAAA;
-    addr[0x02AA] = 0x55555555;
-    addr[0x0555] = 0x80808080;
-    addr[0x0555] = 0xAAAAAAAA;
-    addr[0x02AA] = 0x55555555;
-    udelay (100);
-
-    /* Start erase on unprotected sectors */
-    for (sect = s_first; sect <= s_last; sect++) {
-	if (info->protect[sect] == 0) { /* not protected */
-	    addr = (vu_long*)(info->start[sect]);
-	    addr[0] = 0x30303030;
-	    l_sect = sect;
-	}
-    }
-
-    /* re-enable interrupts if necessary */
-    if (flag)
-	enable_interrupts();
-
-    /* wait at least 80us - let's wait 1 ms */
-    udelay (1000);
-
-    /*
-     * We wait for the last triggered sector
-     */
-    if (l_sect < 0)
-	goto DONE;
-
-    start = get_timer (0);
-    last  = start;
-    addr = (vu_long*)(info->start[l_sect]);
-    while ((addr[0] & 0x80808080) != 0x80808080) {
-	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-	    printf ("Timeout\n");
-	    return 1;
-	}
-	/* show that we're waiting */
-	if ((now - last) > 1000) {  /* every second */
-	    serial_putc ('.');
-	    last = now;
-	}
-    }
-
-  DONE:
-    /* reset to read mode */
-    addr = (volatile unsigned long *)info->start[0];
-    addr[0] = 0xF0F0F0F0;   /* reset bank */
-
-    printf (" done\n");
-    return 0;
-}
-
-/*********************************************************************/
-/* NAME: write_buff() - writes a buffer to flash		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   This function copies a buffer, *src, to flash.		     */
-/*								     */
-/* INPUTS:							     */
-/*  flash_info_t *info - flash information structure		     */
-/*  uchar *src - pointer to buffer to write to flash		     */
-/*  ulong addr - address to start write at			     */
-/*  ulong cnt - number of bytes to write to flash		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   None							     */
-/*								     */
-/* RETURNS:							     */
-/*   0 - OK							     */
-/*   1 - write timeout						     */
-/*   2 - Flash not erased					     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*********************************************************************/
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-    ulong cp, wp, data;
-    int i, l, rc;
-
-    wp = (addr & ~3);	/* get lower word aligned address */
-
-    /*
-     * handle unaligned start bytes
-     */
-    if ((l = addr - wp) != 0) {
-	data = 0;
-	for (i = 0, cp = wp; i < l; ++i, ++cp) {
-	    data = (data << 8) | (*(uchar *)cp);
-	}
-	for (; (i < 4) && (cnt > 0); ++i) {
-	    data = (data << 8) | *src++;
-	    --cnt;
-	    ++cp;
-	}
-	for (; (cnt == 0) && (i < 4); ++i, ++cp) {
-	    data = (data << 8) | (*(uchar *)cp);
-	}
-
-	if ((rc = write_word(info, wp, data)) != 0) {
-	    return (rc);
-	}
-	wp += 4;
-    }
-
-    /*
-     * handle word aligned part
-     */
-    while (cnt >= 4) {
-	data = 0;
-	for (i = 0; i < 4; ++i) {
-	    data = (data << 8) | *src++;
-	}
-	if ((rc = write_word(info, wp, data)) != 0) {
-	    return (rc);
-	}
-	wp  += 4;
-	cnt -= 4;
-    }
-
-    if (cnt == 0) {
-	return (0);
-    }
-
-    /*
-     * handle unaligned tail bytes
-     */
-    data = 0;
-    for (i = 0, cp = wp; (i < 4) && (cnt > 0); ++i, ++cp) {
-	data = (data << 8) | *src++;
-	--cnt;
-    }
-    for (; (i < 4); ++i, ++cp) {
-	data = (data << 8) | (*(uchar *)cp);
-    }
-
-    return (write_word(info, wp, data));
-}
-
-/*********************************************************************/
-/* NAME: write_word() - writes a word to flash			     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   This writes a single word to flash.			     */
-/*								     */
-/* INPUTS:							     */
-/*  flash_info_t *info - flash information structure		     */
-/*  ulong dest - address to write				     */
-/*  ulong data - data to write					     */
-/*								     */
-/* OUTPUTS:							     */
-/*   None							     */
-/*								     */
-/* RETURNS:							     */
-/*   0 - OK							     */
-/*   1 - write timeout						     */
-/*   2 - Flash not erased					     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*********************************************************************/
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-    vu_long *addr = (vu_long*)(info->start[0]);
-    ulong start;
-    int flag;
-
-    /* Check if Flash is (sufficiently) erased */
-    if ((*((vu_long *)dest) & data) != data) {
-	return (2);
-    }
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    addr[0x0555] = 0xAAAAAAAA;
-    addr[0x02AA] = 0x55555555;
-    addr[0x0555] = 0xA0A0A0A0;
-
-    *((vu_long *)dest) = data;
-
-    /* re-enable interrupts if necessary */
-    if (flag)
-	enable_interrupts();
-
-    /* data polling for D7 */
-    start = get_timer (0);
-    while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-	    return (1);
-	}
-    }
-    return (0);
-}
-/*********************************************************************/
-/*			   End of flash.c			     */
-/*********************************************************************/
diff --git a/board/gw8260/gw8260.c b/board/gw8260/gw8260.c
deleted file mode 100644
index bbae0a8..0000000
--- a/board/gw8260/gw8260.c
+++ /dev/null
@@ -1,639 +0,0 @@
-/*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Jay Monkman <jtm@smoothsmoothie.com>
- *
- * (C) Copyright 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Oliver Brown <oliverb@alumni.utexas.net>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*********************************************************************/
-/* DESCRIPTION:
- *   This file contains the board routines for the GW8260 board.
- *
- * MODULE DEPENDENCY:
- *   None
- *
- * RESTRICTIONS/LIMITATIONS:
- *   None
- *
- * Copyright (c) 2001, Advent Networks, Inc.
- */
-/*********************************************************************/
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-
-/*
- * I/O Port configuration table
- *
- */
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {	/*	       conf ppar psor pdir podr pdat */
-	/* PA31 */ {   1,   0,	 0,   1,   0,	0   }, /* TP14		*/
-	/* PA30 */ {   1,   1,	 1,   1,   0,	0   }, /* US_RTS	*/
-	/* PA29 */ {   1,   0,	 0,   1,   0,	1   }, /* LSSI_DATA	*/
-	/* PA28 */ {   1,   0,	 0,   1,   0,	1   }, /* LSSI_CLK	*/
-	/* PA27 */ {   1,   0,	 0,   1,   0,	0   }, /* TP12		*/
-	/* PA26 */ {   1,   0,	 0,   0,   0,	0   }, /* IO_STATUS	*/
-	/* PA25 */ {   1,   0,	 0,   0,   0,	0   }, /* IO_CLOCK	*/
-	/* PA24 */ {   1,   0,	 0,   0,   0,	0   }, /* IO_CONFIG	*/
-	/* PA23 */ {   1,   0,	 0,   0,   0,	0   }, /* IO_DONE	*/
-	/* PA22 */ {   1,   0,	 0,   0,   0,	0   }, /* IO_DATA	*/
-	/* PA21 */ {   1,   1,	 0,   1,   0,	0   }, /* US_TXD3	*/
-	/* PA20 */ {   1,   1,	 0,   1,   0,	0   }, /* US_TXD2	*/
-	/* PA19 */ {   1,   1,	 0,   1,   0,	0   }, /* US_TXD1	*/
-	/* PA18 */ {   1,   1,	 0,   1,   0,	0   }, /* US_TXD0	*/
-	/* PA17 */ {   1,   1,	 0,   0,   0,	0   }, /* DS_RXD0	*/
-	/* PA16 */ {   1,   1,	 0,   0,   0,	0   }, /* DS_RXD1	*/
-	/* PA15 */ {   1,   1,	 0,   0,   0,	0   }, /* DS_RXD2	*/
-	/* PA14 */ {   1,   1,	 0,   0,   0,	0   }, /* DS_RXD3	*/
-	/* PA13 */ {   1,   0,	 0,   1,   0,	0   }, /* SPARE7	*/
-	/* PA12 */ {   1,   0,	 0,   1,   0,	0   }, /* SPARE6	*/
-	/* PA11 */ {   1,   0,	 0,   1,   0,	0   }, /* SPARE5	*/
-	/* PA10 */ {   1,   0,	 0,   1,   0,	0   }, /* SPARE4	*/
-	/* PA9	*/ {   1,   0,	 0,   1,   0,	0   }, /* SPARE3	*/
-	/* PA8	*/ {   1,   0,	 0,   1,   0,	0   }, /* SPARE2	*/
-	/* PA7	*/ {   1,   0,	 0,   0,   0,	0   }, /* LSSI_IN	*/
-	/* PA6	*/ {   1,   0,	 0,   1,   0,	0   }, /* SPARE0	*/
-	/* PA5	*/ {   1,   0,	 0,   1,   0,	0   }, /* DEMOD_RESET_	*/
-	/* PA4	*/ {   1,   0,	 0,   1,   0,	0   }, /* MOD_RESET_	*/
-	/* PA3	*/ {   1,   0,	 0,   1,   0,	0   }, /* IO_RESET	*/
-	/* PA2	*/ {   1,   0,	 0,   1,   0,	0   }, /* TX_ENABLE	*/
-	/* PA1	*/ {   1,   0,	 0,   0,   0,	0   }, /* RX_LOCK	*/
-	/* PA0	*/ {   1,   0,	 0,   1,   0,	1   }  /* MPC_RESET_	*/
-    },
-
-    /* Port B configuration */
-    {	/*	       conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,	 0,   1,   0,	0   }, /* FETH0_TX_ER */
-	/* PB30 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH0_RX_DV */
-	/* PB29 */ {   1,   1,	 1,   1,   0,	0   }, /* FETH0_TX_EN */
-	/* PB28 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH0_RX_ER */
-	/* PB27 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH0_COL   */
-	/* PB26 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH0_CRS   */
-	/* PB25 */ {   1,   1,	 0,   1,   0,	0   }, /* FETH0_TXD3  */
-	/* PB24 */ {   1,   1,	 0,   1,   0,	0   }, /* FETH0_TXD2  */
-	/* PB23 */ {   1,   1,	 0,   1,   0,	0   }, /* FETH0_TXD1  */
-	/* PB22 */ {   1,   1,	 0,   1,   0,	0   }, /* FETH0_TXD0  */
-	/* PB21 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH0_RXD0  */
-	/* PB20 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH0_RXD1  */
-	/* PB19 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH0_RXD2  */
-	/* PB18 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH0_RXD3  */
-	/* PB17 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH1_RX_DV */
-	/* PB16 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH1_RX_ER */
-	/* PB15 */ {   1,   1,	 0,   1,   0,	0   }, /* FETH1_TX_ER */
-	/* PB14 */ {   1,   1,	 0,   1,   0,	0   }, /* FETH1_TX_EN */
-	/* PB13 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH1_COL   */
-	/* PB12 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH1_CRS   */
-	/* PB11 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH1_RXD3  */
-	/* PB10 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH1_RXD2  */
-	/* PB9	*/ {   1,   1,	 0,   0,   0,	0   }, /* FETH1_RXD1  */
-	/* PB8	*/ {   1,   1,	 0,   0,   0,	0   }, /* FETH1_RXD0  */
-	/* PB7	*/ {   1,   1,	 0,   1,   0,	0   }, /* FETH1_TXD0  */
-	/* PB6	*/ {   1,   1,	 0,   1,   0,	0   }, /* FETH1_TXD1  */
-	/* PB5	*/ {   1,   1,	 0,   1,   0,	0   }, /* FETH1_TXD2  */
-	/* PB4	*/ {   1,   1,	 0,   1,   0,	0   }, /* FETH1_TXD3  */
-	/* PB3	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PB2	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PB1	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PB0	*/ {   0,   0,	 0,   0,   0,	0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {	/*	       conf ppar psor pdir podr pdat */
-	/* PC31 */ {   1,   0,	 0,   1,   0,	1   }, /* FAST_RESET_	*/
-	/* PC30 */ {   1,   0,	 0,   1,   0,	1   }, /* FAST_PAUSE_	*/
-	/* PC29 */ {   1,   0,	 0,   1,   0,	0   }, /* FAST_SLEW1	*/
-	/* PC28 */ {   1,   0,	 0,   1,   0,	0   }, /* FAST_SLEW0	*/
-	/* PC27 */ {   1,   0,	 0,   1,   0,	0   }, /* TP13		*/
-	/* PC26 */ {   1,   0,	 0,   0,   0,	0   }, /* RXDECDFLG	*/
-	/* PC25 */ {   1,   0,	 0,   0,   0,	0   }, /* RXACQFAIL	*/
-	/* PC24 */ {   1,   0,	 0,   0,   0,	0   }, /* RXACQFLG	*/
-	/* PC23 */ {   1,   0,	 0,   1,   0,	0   }, /* WD_TCL	*/
-	/* PC22 */ {   1,   0,	 0,   1,   0,	0   }, /* WD_EN		*/
-	/* PC21 */ {   1,   0,	 0,   1,   0,	0   }, /* US_TXCLK	*/
-	/* PC20 */ {   1,   0,	 0,   0,   0,	0   }, /* DS_RXCLK	*/
-	/* PC19 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH0_RX_CLK	*/
-	/* PC18 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH0_TX_CLK	*/
-	/* PC17 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH1_RX_CLK	*/
-	/* PC16 */ {   1,   1,	 0,   0,   0,	0   }, /* FETH1_TX_CLK	*/
-	/* PC15 */ {   1,   0,	 0,   1,   0,	0   }, /* TX_SHUTDOWN_	*/
-	/* PC14 */ {   1,   0,	 0,   0,   0,	0   }, /* RS_232_DTR_	*/
-	/* PC13 */ {   1,   0,	 0,   0,   0,	0   }, /* TXERR		*/
-	/* PC12 */ {   1,   0,	 0,   1,   0,	1   }, /* FETH1_MDDIS	*/
-	/* PC11 */ {   1,   0,	 0,   1,   0,	1   }, /* FETH0_MDDIS	*/
-	/* PC10 */ {   1,   0,	 0,   1,   0,	0   }, /* MDC		*/
-	/* PC9	*/ {   1,   0,	 0,   1,   1,	1   }, /* MDIO		*/
-	/* PC8	*/ {   1,   0,	 0,   1,   1,	1   }, /* SER_NUM	*/
-	/* PC7	*/ {   1,   1,	 0,   0,   0,	0   }, /* US_CTS	*/
-	/* PC6	*/ {   1,   1,	 0,   0,   0,	0   }, /* DS_CD_	*/
-	/* PC5	*/ {   1,   0,	 0,   1,   0,	0   }, /* FETH1_PWRDWN	*/
-	/* PC4	*/ {   1,   0,	 0,   1,   0,	0   }, /* FETH0_PWRDWN	*/
-	/* PC3	*/ {   1,   0,	 0,   1,   0,	0   }, /* MPULED3	*/
-	/* PC2	*/ {   1,   0,	 0,   1,   0,	0   }, /* MPULED2	*/
-	/* PC1	*/ {   1,   0,	 0,   1,   0,	0   }, /* MPULED1	*/
-	/* PC0	*/ {   1,   0,	 0,   1,   0,	1   }, /* MPULED0	*/
-    },
-
-    /* Port D */
-    {	/*	       conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD30 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD29 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD28 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD27 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD26 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD25 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD24 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD23 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD22 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD21 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD20 */ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD19 */ {   1,   1,	 1,   0,   0,	0   }, /*  not used	*/
-	/* PD18 */ {   1,   1,	 1,   0,   0,	0   }, /*  not used	*/
-	/* PD17 */ {   1,   1,	 1,   0,   0,	0   }, /*  not used	*/
-	/* PD16 */ {   1,   1,	 1,   0,   0,	0   }, /*  not used	*/
-	/* PD15 */ {   1,   1,	 1,   0,   1,	1   }, /*  SDRAM_SDA	*/
-	/* PD14 */ {   1,   1,	 1,   0,   1,	1   }, /*  SDRAM_SCL	*/
-	/* PD13 */ {   1,   0,	 0,   1,   0,	0   }, /*  MPULED7	*/
-	/* PD12 */ {   1,   0,	 0,   1,   0,	0   }, /*  MPULED6	*/
-	/* PD11 */ {   1,   0,	 0,   1,   0,	0   }, /*  MPULED5	*/
-	/* PD10 */ {   1,   0,	 0,   1,   0,	0   }, /*  MPULED4	*/
-	/* PD9	*/ {   1,   1,	 0,   1,   0,	0   }, /*  RS232_TXD	*/
-	/* PD8	*/ {   1,   1,	 0,   0,   0,	0   }, /*  RD232_RXD	*/
-	/* PD7	*/ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD6	*/ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD5	*/ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD4	*/ {   1,   0,	 0,   0,   0,	0   }, /*  not used	*/
-	/* PD3	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PD2	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PD1	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PD0	*/ {   0,   0,	 0,   0,   0,	0   }  /* pin doesn't exist */
-    }
-};
-
-/*********************************************************************/
-/* NAME: checkboard() -	 Displays the board type and serial number   */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays the board type and serial number			     */
-/*								     */
-/* RETURNS:							     */
-/*   Always returns 1						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int checkboard (void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	puts ("Board: Advent Networks gw8260\n");
-
-	if (i > 0) {
-		printf("SN:    %s\n", buf);
-	}
-	return 0;
-}
-
-
-#if defined (CONFIG_SYS_DRAM_TEST)
-/*********************************************************************/
-/* NAME:  move64() -  moves a double word (64-bit)		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   this function performs a double word move from the data at	     */
-/*   the source pointer to the location at the destination pointer.  */
-/*								     */
-/* INPUTS:							     */
-/*   unsigned long long *src  - pointer to data to move		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   unsigned long long *dest - pointer to locate to move data	     */
-/*								     */
-/* RETURNS:							     */
-/*   None							     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*   May cloober fr0.						     */
-/*								     */
-/*********************************************************************/
-static void move64 (unsigned long long *src, unsigned long long *dest)
-{
-	asm ("lfd  0, 0(3)\n\t"	/* fpr0   =  *scr       */
-	     "stfd 0, 0(4)"	/* *dest  =  fpr0       */
-      : : : "fr0");		/* Clobbers fr0         */
-	return;
-}
-
-
-#if defined (CONFIG_SYS_DRAM_TEST_DATA)
-
-unsigned long long pattern[] = {
-	0xaaaaaaaaaaaaaaaaULL,
-	0xccccccccccccccccULL,
-	0xf0f0f0f0f0f0f0f0ULL,
-	0xff00ff00ff00ff00ULL,
-	0xffff0000ffff0000ULL,
-	0xffffffff00000000ULL,
-	0x00000000ffffffffULL,
-	0x0000ffff0000ffffULL,
-	0x00ff00ff00ff00ffULL,
-	0x0f0f0f0f0f0f0f0fULL,
-	0x3333333333333333ULL,
-	0x5555555555555555ULL,
-};
-
-/*********************************************************************/
-/* NAME:  mem_test_data() -  test data lines for shorts and opens    */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Tests data lines for shorts and opens by forcing adjacent data  */
-/*   to opposite states. Because the data lines could be routed in   */
-/*   an arbitrary manner the must ensure test patterns ensure that   */
-/*   every case is tested. By using the following series of binary   */
-/*   patterns every combination of adjacent bits is test regardless  */
-/*   of routing.						     */
-/*								     */
-/*     ...101010101010101010101010				     */
-/*     ...110011001100110011001100				     */
-/*     ...111100001111000011110000				     */
-/*     ...111111110000000011111111				     */
-/*								     */
-/*   Carrying this out, gives us six hex patterns as follows:	     */
-/*								     */
-/*     0xaaaaaaaaaaaaaaaa					     */
-/*     0xcccccccccccccccc					     */
-/*     0xf0f0f0f0f0f0f0f0					     */
-/*     0xff00ff00ff00ff00					     */
-/*     0xffff0000ffff0000					     */
-/*     0xffffffff00000000					     */
-/*								     */
-/*   The number test patterns will always be given by:		     */
-/*								     */
-/*   log(base 2)(number data bits) = log2 (64) = 6		     */
-/*								     */
-/*   To test for short and opens to other signals on our boards. we  */
-/*   simply							     */
-/*   test with the 1's complemnt of the paterns as well.	     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern				     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*  Assumes only one one SDRAM bank				     */
-/*								     */
-/*********************************************************************/
-int mem_test_data (void)
-{
-	unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_SDRAM_BASE;
-	unsigned long long temp64 = 0;
-	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
-	int i;
-	unsigned int hi, lo;
-
-	for (i = 0; i < num_patterns; i++) {
-		move64 (&(pattern[i]), pmem);
-		move64 (pmem, &temp64);
-
-		/* hi = (temp64>>32) & 0xffffffff;          */
-		/* lo = temp64 & 0xffffffff;                */
-		/* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
-
-		hi = (pattern[i] >> 32) & 0xffffffff;
-		lo = pattern[i] & 0xffffffff;
-		/* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo);  */
-
-		if (temp64 != pattern[i]) {
-			printf ("\n   Data Test Failed, pattern 0x%08x%08x",
-				hi, lo);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-#endif /* CONFIG_SYS_DRAM_TEST_DATA */
-
-#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
-/*********************************************************************/
-/* NAME:  mem_test_address() -	test address lines		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   This function performs a test to verify that each word im	     */
-/*   memory is uniquly addressable. The test sequence is as follows: */
-/*								     */
-/*   1) write the address of each word to each word.		     */
-/*   2) verify that each location equals its address		     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern and address			     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_test_address (void)
-{
-	volatile unsigned int *pmem =
-		(volatile unsigned int *) CONFIG_SYS_SDRAM_BASE;
-	const unsigned int size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024) / 4;
-	unsigned int i;
-
-	/* write address to each location */
-	for (i = 0; i < size; i++) {
-		pmem[i] = i;
-	}
-
-	/* verify each loaction */
-	for (i = 0; i < size; i++) {
-		if (pmem[i] != i) {
-			printf ("\n   Address Test Failed at 0x%x", i);
-			return 1;
-		}
-	}
-	return 0;
-}
-#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
-
-#if defined (CONFIG_SYS_DRAM_TEST_WALK)
-/*********************************************************************/
-/* NAME:   mem_march() -  memory march				     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Marches up through memory. At each location verifies rmask if   */
-/*   read = 1. At each location write wmask if	write = 1. Displays  */
-/*   failing address and pattern.				     */
-/*								     */
-/* INPUTS:							     */
-/*   volatile unsigned long long * base - start address of test	     */
-/*   unsigned int size - number of dwords(64-bit) to test	     */
-/*   unsigned long long rmask - read verify mask		     */
-/*   unsigned long long wmask - wrtie verify mask		     */
-/*   short read - verifies rmask if read = 1			     */
-/*   short write  - writes wmask if write = 1			     */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays failing test pattern and address			     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_march (volatile unsigned long long *base,
-	       unsigned int size,
-	       unsigned long long rmask,
-	       unsigned long long wmask, short read, short write)
-{
-	unsigned int i;
-	unsigned long long temp = 0;
-	unsigned int hitemp, lotemp, himask, lomask;
-
-	for (i = 0; i < size; i++) {
-		if (read != 0) {
-			/* temp = base[i]; */
-			move64 ((unsigned long long *) &(base[i]), &temp);
-			if (rmask != temp) {
-				hitemp = (temp >> 32) & 0xffffffff;
-				lotemp = temp & 0xffffffff;
-				himask = (rmask >> 32) & 0xffffffff;
-				lomask = rmask & 0xffffffff;
-
-				printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
-				return 1;
-			}
-		}
-		if (write != 0) {
-			/*  base[i] = wmask; */
-			move64 (&wmask, (unsigned long long *) &(base[i]));
-		}
-	}
-	return 0;
-}
-#endif /* CONFIG_SYS_DRAM_TEST_WALK */
-
-/*********************************************************************/
-/* NAME:   mem_test_walk() -  a simple walking ones test	     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Performs a walking ones through entire physical memory. The     */
-/*   test uses as series of memory marches, mem_march(), to verify   */
-/*   and write the test patterns to memory. The test sequence is as  */
-/*   follows:							     */
-/*     1) march writing 0000...0001				     */
-/*     2) march verifying 0000...0001  , writing  0000...0010	     */
-/*     3) repeat step 2 shifting masks left 1 bit each time unitl    */
-/*	   the write mask equals 1000...0000			     */
-/*     4) march verifying 1000...0000				     */
-/*   The test fails if any of the memory marches return a failure.   */
-/*								     */
-/* OUTPUTS:							     */
-/*   Displays which pass on the memory test is executing	     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int mem_test_walk (void)
-{
-	unsigned long long mask;
-	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CONFIG_SYS_SDRAM_BASE;
-	const unsigned long size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024) / 8;
-
-	unsigned int i;
-
-	mask = 0x01;
-
-	printf ("Initial Pass");
-	mem_march (pmem, size, 0x0, 0x1, 0, 1);
-
-	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
-	printf ("		");
-	printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
-
-	for (i = 0; i < 63; i++) {
-		printf ("Pass %2d", i + 2);
-		if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
-			/*printf("mask: 0x%x, pass: %d, ", mask, i); */
-			return 1;
-		}
-		mask = mask << 1;
-		printf ("\b\b\b\b\b\b\b");
-	}
-
-	printf ("Last Pass");
-	if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
-		/* printf("mask: 0x%x", mask); */
-		return 1;
-	}
-	printf ("\b\b\b\b\b\b\b\b\b");
-	printf ("	     ");
-	printf ("\b\b\b\b\b\b\b\b\b");
-
-	return 0;
-}
-
-/*********************************************************************/
-/* NAME:    testdram() -  calls any enabled memory tests	     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Runs memory tests if the environment test variables are set to  */
-/*   'y'.							     */
-/*								     */
-/* INPUTS:							     */
-/*   testdramdata    - If set to 'y', data test is run.		     */
-/*   testdramaddress - If set to 'y', address test is run.	     */
-/*   testdramwalk    - If set to 'y', walking ones test is run	     */
-/*								     */
-/* OUTPUTS:							     */
-/*   None							     */
-/*								     */
-/* RETURNS:							     */
-/*   0 -  Passed test						     */
-/*   1 -  Failed test						     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-int testdram (void)
-{
-	int rundata, runaddress, runwalk;
-
-	rundata = getenv_yesno("testdramdata") == 1;
-	runaddress = getenv_yesno("testdramaddress") == 1;
-	runwalk = getenv_yesno("testdramwalk") == 1;
-
-	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM ... ");
-	}
-#ifdef CONFIG_SYS_DRAM_TEST_DATA
-	if (rundata == 1) {
-		if (mem_test_data () == 1) {
-			return 1;
-		}
-	}
-#endif
-#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
-	if (runaddress == 1) {
-		if (mem_test_address () == 1) {
-			return 1;
-		}
-	}
-#endif
-#ifdef CONFIG_SYS_DRAM_TEST_WALK
-	if (runwalk == 1) {
-		if (mem_test_walk () == 1) {
-			return 1;
-		}
-	}
-#endif
-	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("passed");
-	}
-	return 0;
-
-}
-#endif /* CONFIG_SYS_DRAM_TEST */
-
-/*********************************************************************/
-/* NAME: initdram() -  initializes SDRAM controller		     */
-/*								     */
-/* DESCRIPTION:							     */
-/*   Initializes the MPC8260's SDRAM controller.		     */
-/*								     */
-/* INPUTS:							     */
-/*   CONFIG_SYS_IMMR	    -  MPC8260 Internal memory map		     */
-/*   CONFIG_SYS_SDRAM_BASE -  Physical start address of SDRAM		     */
-/*   CONFIG_SYS_PSDMR -       SDRAM mode register			     */
-/*   CONFIG_SYS_MPTPR -       Memory refresh timer prescaler register	     */
-/*   CONFIG_SYS_SDRAM0_SIZE - SDRAM size				     */
-/*								     */
-/* RETURNS:							     */
-/*   SDRAM size in bytes					     */
-/*								     */
-/* RESTRICTIONS/LIMITATIONS:					     */
-/*								     */
-/*								     */
-/*********************************************************************/
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-	volatile uchar c = 0, *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8);
-	ulong psdmr = CONFIG_SYS_PSDMR;
-	int i;
-
-	/*
-	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-	 *
-	 * "At system reset, initialization software must set up the
-	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-	 *  system software should execute the following initialization sequence
-	 *  for each SDRAM device.
-	 *
-	 *  1. Issue a PRECHARGE-ALL-BANKS command
-	 *  2. Issue eight CBR REFRESH commands
-	 *  3. Issue a MODE-SET command to initialize the mode register
-	 *
-	 *  The initial commands are executed by setting P/LSDMR[OP] and
-	 *  accessing the SDRAM with a single-byte transaction."
-	 *
-	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
-	 */
-
-	memctl->memc_psrt = CONFIG_SYS_PSRT;
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
-	*ramaddr = c;
-
-	memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
-	for (i = 0; i < 8; i++) {
-		*ramaddr = c;
-	}
-	memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
-	*ramaddr = c;
-
-	memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-	*ramaddr = c;
-
-	/* return total ram size */
-	return (CONFIG_SYS_SDRAM0_SIZE * 1024 * 1024);
-}
-
-/*********************************************************************/
-/*			   End of gw8260.c			     */
-/*********************************************************************/
diff --git a/configs/gw8260_defconfig b/configs/gw8260_defconfig
deleted file mode 100644
index a59ec3a..0000000
--- a/configs/gw8260_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_GW8260=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index af4b00c..0c47ebd 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+gw8260           powerpc     mpc8260        -           -           Oliver Brown <obrown@adventnetworks.com>
 IPHASE4539       powerpc     mpc8260        -           -           Wolfgang Grandegger <wg@denx.de>
 muas3001         powerpc     mpc8260        -           -           Heiko Schocher <hs@denx.de>
 PM825            powerpc     mpc8260        -           -           Wolfgang Denk <wd@denx.de>
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
deleted file mode 100644
index 262c9e9..0000000
--- a/include/configs/gw8260.h
+++ /dev/null
@@ -1,800 +0,0 @@
-/*
- * (C) Copyright 2000
- * Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Jay Monkman <jmonkman@adventnetworks.com>
- *
- * (C) Copyright 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Oliver Brown <obrown@adventnetworks.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*********************************************************************/
-/* DESCRIPTION:
- *   This file contains the board configuartion for the GW8260 board.
- *
- * MODULE DEPENDENCY:
- *   None
- *
- * RESTRICTIONS/LIMITATIONS:
- *   None
- *
- * Copyright (c) 2001, Advent Networks, Inc.
- */
-/*********************************************************************/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-/* Enable debug prints */
-#undef DEBUG_BOOTP_EXT        /* Debug received vendor fields */
-
-/* What is the oscillator's (UX2) frequency in Hz? */
-#define CONFIG_8260_CLKIN  (66 * 1000 * 1000)
-
-/*-----------------------------------------------------------------------
- * MODCK_H & MODCLK[1-3] - Ref: Section 9.2 in MPC8206 User Manual
- *-----------------------------------------------------------------------
- * What should MODCK_H be? It is dependent on the oscillator
- * frequency, MODCK[1-3], and desired CPM and core frequencies.
- * Here are some example values (all frequencies are in MHz):
- *
- * MODCK_H   MODCK[1-3]  Osc    CPM    Core  S2-6   S2-7   S2-8
- * -------   ----------  ---    ---    ----  -----  -----  -----
- * 0x5       0x5     66 133     133    Open  Close  Open
- * 0x5       0x6     66 133     166    Open  Open   Close
- * 0x5       0x7     66 133     200    Open  Open   Open
- * 0x6       0x0     66 133     233    Close Close  Close
- * 0x6       0x1     66 133     266    Close Close  Open
- * 0x6       0x2     66 133     300    Close Open   Close
- */
-#define CONFIG_SYS_SBC_MODCK_H 0x05
-
-/* Define this if you want to boot from 0x00000100. If you don't define
- * this, you will need to program the bootloader to 0xfff00000, and
- * get the hardware reset config words at 0xfe000000. The simplest
- * way to do that is to program the bootloader at both addresses.
- * It is suggested that you just let U-Boot live at 0x00000000.
- */
-#define CONFIG_SYS_SBC_BOOT_LOW 1
-
-/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE.
- * The main FLASH is whichever is connected to *CS0. U-Boot expects
- * this to be the SIMM.
- */
-#define CONFIG_SYS_FLASH0_BASE 0x40000000
-#define CONFIG_SYS_FLASH0_SIZE 8
-
-/* Define CONFIG_SYS_FLASH_CHECKSUM to enable flash checksum during boot.
- * Note: the 'flashchecksum' environment variable must also be set to 'y'.
- */
-#define CONFIG_SYS_FLASH_CHECKSUM
-
-/* What should be the base address of SDRAM DIMM and how big is
- * it (in Mbytes)?
- */
-#define CONFIG_SYS_SDRAM0_BASE 0x00000000
-#define CONFIG_SYS_SDRAM0_SIZE 64
-
-/*
- * DRAM tests
- *   CONFIG_SYS_DRAM_TEST - enables the following tests.
- *
- *   CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
- *                        Environment variable 'test_dram_data' must be
- *                        set to 'y'.
- *   CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
- *                        addressable. Environment variable
- *                        'test_dram_address' must be set to 'y'.
- *   CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
- *                        This test takes about 6 minutes to test 64 MB.
- *                        Environment variable 'test_dram_walk' must be
- *                        set to 'y'.
- */
-#define CONFIG_SYS_DRAM_TEST
-#if defined(CONFIG_SYS_DRAM_TEST)
-#define CONFIG_SYS_DRAM_TEST_DATA
-#define CONFIG_SYS_DRAM_TEST_ADDRESS
-#define CONFIG_SYS_DRAM_TEST_WALK
-#endif /* CONFIG_SYS_DRAM_TEST */
-
-/*
- * GW8260 with 16 MB DIMM:
- *
- *     0x0000 0000     Exception Vector code, 8k
- *           :
- *     0x0000 1FFF
- *     0x0000 2000     Free for Application Use
- *           :
- *           :
- *
- *           :
- *           :
- *     0x00F5 FF30     Monitor Stack (Growing downward)
- *                     Monitor Stack Buffer (0x80)
- *     0x00F5 FFB0     Board Info Data
- *     0x00F6 0000     Malloc Arena
- *           :          CONFIG_ENV_SECT_SIZE, 256k
- *           :          CONFIG_SYS_MALLOC_LEN,    128k
- *     0x00FC 0000     RAM Copy of Monitor Code
- *           :              CONFIG_SYS_MONITOR_LEN,   256k
- *     0x00FF FFFF     [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
- */
-
-/*
- * GW8260 with 64 MB DIMM:
- *
- *     0x0000 0000     Exception Vector code, 8k
- *           :
- *     0x0000 1FFF
- *     0x0000 2000     Free for Application Use
- *           :
- *           :
- *
- *           :
- *           :
- *     0x03F5 FF30     Monitor Stack (Growing downward)
- *                     Monitor Stack Buffer (0x80)
- *     0x03F5 FFB0     Board Info Data
- *     0x03F6 0000     Malloc Arena
- *           :          CONFIG_ENV_SECT_SIZE, 256k
- *           :          CONFIG_SYS_MALLOC_LEN,    128k
- *     0x03FC 0000     RAM Copy of Monitor Code
- *           :              CONFIG_SYS_MONITOR_LEN,   256k
- *     0x03FF FFFF     [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
- */
-
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere.
- */
-#define CONFIG_CONS_ON_SMC  1   /* define if console on SMC */
-#undef  CONFIG_CONS_ON_SCC      /* define if console on SCC */
-#undef  CONFIG_CONS_NONE        /* define if console on neither */
-#define CONFIG_CONS_INDEX   1   /* which SMC/SCC channel for console */
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-
-#undef  CONFIG_ETHER_ON_SCC
-#define CONFIG_ETHER_ON_FCC
-#undef  CONFIG_ETHER_NONE       /* define if ethernet on neither */
-
-#ifdef  CONFIG_ETHER_ON_SCC
-#define CONFIG_ETHER_INDEX  1   /* which SCC/FCC channel for ethernet */
-#endif  /* CONFIG_ETHER_ON_SCC */
-
-#ifdef  CONFIG_ETHER_ON_FCC
-#define CONFIG_ETHER_INDEX  2   /* which SCC/FCC channel for ethernet */
-#define CONFIG_MII              /* MII PHY management           */
-#define CONFIG_BITBANGMII       /* bit-bang MII PHY management  */
-/*
- * Port pins used for bit-banged MII communictions (if applicable).
- */
-#define MDIO_PORT   2       /* Port C */
-
-#define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
-				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE	MDIO_DECLARE
-
-#define MDIO_ACTIVE    (iop->pdir |=  0x00400000)
-#define MDIO_TRISTATE  (iop->pdir &= ~0x00400000)
-#define MDIO_READ     ((iop->pdat &  0x00400000) != 0)
-
-#define MDIO(bit)   if(bit) iop->pdat |=  0x00400000; \
-	    else            iop->pdat &= ~0x00400000
-
-#define MDC(bit)    if(bit) iop->pdat |=  0x00200000; \
-	    else    iop->pdat &= ~0x00200000
-
-#define MIIDELAY    udelay(1)
-#endif  /* CONFIG_ETHER_ON_FCC */
-
-#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
-
-/*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - Select bus for bd/buffers (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CONFIG_SYS_CPMFCR_RAMTYPE	0
-# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
-
-/*
- * - Rx-CLK is CLK15
- * - Tx-CLK is CLK16
- * - Select bus for bd/buffers (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK3	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CONFIG_SYS_CPMFCR_RAMTYPE	0
-# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
-
-/* Define this to reserve an entire FLASH sector (256 KB) for
- * environment variables. Otherwise, the environment will be
- * put in the same sector as U-Boot, and changing variables
- * will erase U-Boot temporarily
- */
-#define CONFIG_ENV_IN_OWN_SECT
-
-/* Define to allow the user to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* What should the console's baud rate be? */
-#define CONFIG_BAUDRATE     115200
-
-/* Ethernet MAC address - This is set to all zeros to force an
- *                        an error if we use BOOTP without setting
- *                        the MAC address
- */
-#define CONFIG_ETHADDR      00:00:00:00:00:00
-
-/* Set to a positive value to delay for running BOOTCOMMAND */
-#define CONFIG_BOOTDELAY    5   /* autoboot after 5 seconds */
-
-/* Be selective on what keys can delay or stop the autoboot process
- *     To stop  use: " "
- */
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT	\
-	"Autobooting in %d seconds, press \" \" to stop\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR    " "
-#undef  CONFIG_AUTOBOOT_DELAY_STR
-#define DEBUG_BOOTKEYS      0
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_DNS
-
-/* undef this to save memory */
-#define CONFIG_SYS_LONGHELP
-
-/* Monitor Command Prompt */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-
-#undef CONFIG_CMD_KGDB
-
-
-/* Where do the internal registers live? */
-#define CONFIG_SYS_IMMR        0xf0000000
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#endif
-
-/* What is the address of IO controller */
-#define CONFIG_SYS_IO_BASE 0xe0000000
-
-/*****************************************************************************
- *
- * You should not have to modify any of the following settings
- *
- *****************************************************************************/
-
-#define CONFIG_GW8260       1   /* on an GW8260 Board  */
-#define CONFIG_CPM2		1	/* Has a CPM2 */
-
-/*
- * Miscellaneous configurable options
- */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CBSIZE        1024    /* Console I/O Buffer Size       */
-#else
-#  define CONFIG_SYS_CBSIZE        256     /* Console I/O Buffer Size       */
-#endif
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE    (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
-
-#define CONFIG_SYS_MAXARGS     8          /* max number of command args   */
-
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size    */
-
-/* Convert clocks to MHZ when passing board info to kernel.
- * This must be defined for eariler 2.4 kernels (~2.4.4).
- */
-#define CONFIG_CLOCKS_IN_MHZ
-
-#define CONFIG_SYS_LOAD_ADDR   0x100000 /* default load address */
-
-
-/* memtest works from the end of the exception vector table
- * to the end of the DRAM less monitor and malloc area
- */
-#define CONFIG_SYS_MEMTEST_START   0x2000
-
-#define CONFIG_SYS_STACK_USAGE     0x10000 /* Reserve 64k for the stack usage */
-
-#define CONFIG_SYS_MEM_END_USAGE   ( CONFIG_SYS_MONITOR_LEN \
-			    + CONFIG_SYS_MALLOC_LEN \
-			    + CONFIG_ENV_SECT_SIZE \
-			    + CONFIG_SYS_STACK_USAGE )
-
-#define CONFIG_SYS_MEMTEST_END     ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
-			    - CONFIG_SYS_MEM_END_USAGE )
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_FLASH_BASE  CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_FLASH_SIZE  CONFIG_SYS_FLASH0_SIZE
-#define CONFIG_SYS_SDRAM_BASE  CONFIG_SYS_SDRAM0_BASE
-#define CONFIG_SYS_SDRAM_SIZE  CONFIG_SYS_SDRAM0_SIZE
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- */
-#if defined(CONFIG_SYS_SBC_BOOT_LOW)
-#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
-#else
-#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (0)
-#endif /* defined(CONFIG_SYS_SBC_BOOT_LOW) */
-
-/* get the HRCW ISB field from CONFIG_SYS_IMMR */
-#define CONFIG_SYS_SBC_HRCW_IMMR   ( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) | \
-		  ((CONFIG_SYS_IMMR & 0x01000000) >>  7) | \
-		  ((CONFIG_SYS_IMMR & 0x00100000) >>  4) )
-
-#define CONFIG_SYS_HRCW_MASTER     ( HRCW_BPS11                | \
-		  HRCW_DPPC11               | \
-		  CONFIG_SYS_SBC_HRCW_IMMR         | \
-		  HRCW_MMR00                | \
-		  HRCW_LBPC11               | \
-		  HRCW_APPC10               | \
-		  HRCW_CS10PC00             | \
-		  (CONFIG_SYS_SBC_MODCK_H & HRCW_MODCK_H1111)  | \
-		  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS )
-
-/* no slaves */
-#define CONFIG_SYS_HRCW_SLAVE1     0
-#define CONFIG_SYS_HRCW_SLAVE2     0
-#define CONFIG_SYS_HRCW_SLAVE3     0
-#define CONFIG_SYS_HRCW_SLAVE4     0
-#define CONFIG_SYS_HRCW_SLAVE5     0
-#define CONFIG_SYS_HRCW_SLAVE6     0
-#define CONFIG_SYS_HRCW_SLAVE7     0
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR    CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE     0x4000  /* Size of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET   CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent.
- */
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_FLASH0_BASE
-
-#define CONFIG_SYS_MONITOR_LEN     (256 * 1024) /* Reserve 256 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN      (128 * 1024) /* Reserve 128 kB for malloc()  */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ       (8 * 1024 * 1024) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS   1    /* max number of memory banks        */
-#define CONFIG_SYS_MAX_FLASH_SECT    32   /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT  8000 /* Timeout for Flash Erase (in ms)   */
-#define CONFIG_SYS_FLASH_WRITE_TOUT  1    /* Timeout for Flash Write (in ms)   */
-
-#define CONFIG_ENV_IS_IN_FLASH   1
-
-#ifdef CONFIG_ENV_IN_OWN_SECT
-#  define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE +  (256 * 1024))
-#  define CONFIG_ENV_SECT_SIZE   (256 * 1024)
-#else
-#  define CONFIG_ENV_SIZE        (16 * 1024)/* Size of Environment Sector  */
-#  define CONFIG_ENV_ADD  ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - CONFIG_ENV_SIZE)
-#  define CONFIG_ENV_SECT_SIZE (256 * 1024)/* see README - env sect real size  */
-#endif /* CONFIG_ENV_IN_OWN_SECT */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE  32      /* For MPC8260 CPU */
-
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT    5   /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers            2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT   (HID0_ICE  |\
-			 HID0_DCE  |\
-			 HID0_ICFI |\
-			 HID0_DCI  |\
-			 HID0_IFEM |\
-			 HID0_ABE)
-
-#define CONFIG_SYS_HID0_FINAL  (HID0_ICE  |\
-			 HID0_IFEM |\
-			 HID0_ABE  |\
-			 HID0_EMCP)
-#define CONFIG_SYS_HID2    0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RMR     0
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration                           4-25
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_BCR     (BCR_ETM)
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration                 4-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR  (SIUMCR_DPPC11  |\
-		     SIUMCR_L2CPC00 |\
-		     SIUMCR_APPC10  |\
-		     SIUMCR_MMR00)
-
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control                11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#define CONFIG_SYS_SYPCR   (SYPCR_SWTC |\
-		     SYPCR_BMT  |\
-		     SYPCR_PBME |\
-		     SYPCR_LBME |\
-		     SYPCR_SWRI |\
-		     SYPCR_SWP)
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control             4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC |\
-		     TMCNTSC_ALR |\
-		     TMCNTSC_TCF |\
-		     TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control         4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR   (PISCR_PS  |\
-		     PISCR_PTF |\
-		     PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control                           9-8
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SCCR    0
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration                 13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR    0
-
-/*
- * Initialize Memory Controller:
- *
- * Bank Bus   Machine PortSz  Device
- * ---- ---   ------- ------  ------
- *  0   60x   GPCM    32 bit  FLASH (SIMM - 4MB)
- *  1   60x   GPCM    32 bit  unused
- *  2   60x   SDRAM   64 bit  SDRAM (DIMM - 16MB or 64MB)
- *  3   60x   SDRAM   64 bit  unused
- *  4   Local GPCM     8 bit  IO    (on board - 64k)
- *  5   60x   GPCM     8 bit  unused
- *  6   60x   GPCM     8 bit  unused
- *  7   60x   GPCM     8 bit  unused
- *
- */
-
-/*-----------------------------------------------------------------------
- * BR0 - Base Register
- *     Ref: Section 10.3.1 on page 10-14
- * OR0 - Option Register
- *     Ref: Section 10.3.2 on page 10-18
- *-----------------------------------------------------------------------
- */
-
-/* Bank 0,1 - FLASH SIMM
- *
- * This expects the FLASH SIMM to be connected to *CS0
- * It consists of 4 AM29F016D parts.
- *
- * Note: For the 8 MB SIMM, *CS1 is unused.
- */
-
-/* BR0 is configured as follows:
- *
- *     - Base address of 0x40000000
- *     - 32 bit port size
- *     - Data errors checking is disabled
- *     - Read and write access
- *     - GPCM 60x bus
- *     - Access are handled by the memory controller according to MSEL
- *     - Not used for atomic operations
- *     - No data pipelining is done
- *     - Valid
- */
-#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\
-			  BRx_PS_32                     |\
-			  BRx_MS_GPCM_P                 |\
-			  BRx_V)
-
-/* OR0 is configured as follows:
- *
- *     - 8 MB
- *     - *BCTL0 is asserted upon access to the current memory bank
- *     - *CW / *WE are negated a quarter of a clock earlier
- *     - *CS is output at the same time as the address lines
- *     - Uses a clock cycle length of 5
- *     - *PSDVAL is generated internally by the memory controller
- *       unless *GTA is asserted earlier externally.
- *     - Relaxed timing is generated by the GPCM for accesses
- *       initiated to this memory region.
- *     - One idle clock is inserted between a read access from the
- *       current bank and the next access.
- */
-#define CONFIG_SYS_OR0_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE) |\
-			 ORxG_CSNT          |\
-			 ORxG_ACS_DIV1      |\
-			 ORxG_SCY_5_CLK     |\
-			 ORxG_TRLX          |\
-			 ORxG_EHTR)
-
-/*-----------------------------------------------------------------------
- * BR2 - Base Register
- *     Ref: Section 10.3.1 on page 10-14
- * OR2 - Option Register
- *     Ref: Section 10.3.2 on page 10-16
- *-----------------------------------------------------------------------
- */
-
-/* Bank 2 - SDRAM DIMM
- *
- *     16MB DIMM: P/N
- *     64MB DIMM: P/N  1W-8864X8-4-P1-EST or
- *                     MT4LSDT864AG-10EB1 (Micron)
- *
- * Note: *CS3 is unused for this DIMM
- */
-
-/* With a 16 MB or 64 MB DIMM, the BR2 is configured as follows:
- *
- *     - Base address of 0x00000000
- *     - 64 bit port size (60x bus only)
- *     - Data errors checking is disabled
- *     - Read and write access
- *     - SDRAM 60x bus
- *     - Access are handled by the memory controller according to MSEL
- *     - Not used for atomic operations
- *     - No data pipelining is done
- *     - Valid
- */
-#define CONFIG_SYS_BR2_PRELIM  ((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
-			  BRx_PS_64          |\
-			  BRx_MS_SDRAM_P     |\
-			  BRx_V)
-
-/* With a 16 MB DIMM, the OR2 is configured as follows:
- *
- *     - 16 MB
- *     - 2 internal banks per device
- *     - Row start address bit is A9 with PSDMR[PBI] = 0
- *     - 11 row address lines
- *     - Back-to-back page mode
- *     - Internal bank interleaving within save device enabled
- */
-#if (CONFIG_SYS_SDRAM0_SIZE == 16)
-#define CONFIG_SYS_OR2_PRELIM  (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE) |\
-			 ORxS_BPD_2         |\
-			 ORxS_ROWST_PBI0_A9 |\
-			 ORxS_NUMR_11)
-
-/* With a 16 MB DIMM, the PSDMR is configured as follows:
- *
- *     - Page Based Interleaving,
- *     - Refresh Enable,
- *     - Address Multiplexing where A5 is output on A14 pin
- *       (A6 on A15, and so on),
- *     - use address pins A16-A18 as bank select,
- *     - A9 is output on SDA10 during an ACTIVATE command,
- *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
- *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
- *       is 3 clocks,
- *     - earliest timing for READ/WRITE command after ACTIVATE command is
- *       2 clocks,
- *     - earliest timing for PRECHARGE after last data was read is 1 clock,
- *     - earliest timing for PRECHARGE after last data was written is 1 clock,
- *     - CAS Latency is 2.
- */
-
-/*-----------------------------------------------------------------------
- * PSDMR - 60x Bus SDRAM Mode Register
- *     Ref: Section 10.3.3 on page 10-21
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PSDMR   (PSDMR_RFEN       |\
-		     PSDMR_SDAM_A14_IS_A5 |\
-		     PSDMR_BSMA_A16_A18   |\
-		     PSDMR_SDA10_PBI0_A9  |\
-		     PSDMR_RFRC_7_CLK     |\
-		     PSDMR_PRETOACT_3W    |\
-		     PSDMR_ACTTORW_2W     |\
-		     PSDMR_LDOTOPRE_1C    |\
-		     PSDMR_WRC_1C         |\
-		     PSDMR_CL_2)
-#endif /* (CONFIG_SYS_SDRAM0_SIZE == 16) */
-
-/* With a 64 MB DIMM, the OR2 is configured as follows:
- *
- *     - 64 MB
- *     - 4 internal banks per device
- *     - Row start address bit is A8 with PSDMR[PBI] = 0
- *     - 12 row address lines
- *     - Back-to-back page mode
- *     - Internal bank interleaving within save device enabled
- */
-#if (CONFIG_SYS_SDRAM0_SIZE == 64)
-#define CONFIG_SYS_OR2_PRELIM  (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE) |\
-	     ORxS_BPD_4         |\
-	     ORxS_ROWST_PBI0_A8     |\
-	     ORxS_NUMR_12)
-
-/* With a 64 MB DIMM, the PSDMR is configured as follows:
- *
- *     - Page Based Interleaving,
- *     - Refresh Enable,
- *     - Address Multiplexing where A5 is output on A14 pin
- *       (A6 on A15, and so on),
- *     - use address pins A14-A16 as bank select,
- *     - A9 is output on SDA10 during an ACTIVATE command,
- *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
- *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
- *       is 3 clocks,
- *     - earliest timing for READ/WRITE command after ACTIVATE command is
- *       2 clocks,
- *     - earliest timing for PRECHARGE after last data was read is 1 clock,
- *     - earliest timing for PRECHARGE after last data was written is 1 clock,
- *     - CAS Latency is 2.
- */
-
-/*-----------------------------------------------------------------------
- * PSDMR - 60x Bus SDRAM Mode Register
- *     Ref: Section 10.3.3 on page 10-21
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PSDMR   (PSDMR_RFEN       |\
-		     PSDMR_SDAM_A14_IS_A5 |\
-		     PSDMR_BSMA_A14_A16   |\
-		     PSDMR_SDA10_PBI0_A9  |\
-		     PSDMR_RFRC_7_CLK     |\
-		     PSDMR_PRETOACT_3W    |\
-		     PSDMR_ACTTORW_2W     |\
-		     PSDMR_LDOTOPRE_1C    |\
-		     PSDMR_WRC_1C         |\
-		     PSDMR_CL_2)
-#endif  /* (CONFIG_SYS_SDRAM0_SIZE == 64) */
-
-#define CONFIG_SYS_PSRT    0x0e
-#define CONFIG_SYS_MPTPR   MPTPR_PTP_DIV32
-
-
-/*-----------------------------------------------------------------------
- * BR4 - Base Register
- *     Ref: Section 10.3.1 on page 10-14
- * OR4 - Option Register
- *     Ref: Section 10.3.2 on page 10-18
- *-----------------------------------------------------------------------
- */
-/* Bank 4 - Onboard Memory Mapped IO controller
- *
- * This expects the onboard IO controller to connected to *CS4 and
- * the local bus.
- *     - Base address of 0xe0000000
- *     - 8 bit port size (local bus only)
- *     - Read and write access
- *     - GPCM local bus
- *     - Not used for atomic operations
- *     - No data pipelining is done
- *     - Valid
- *     - extended hold time
- *     - 11 wait states
- */
-
-#ifdef CONFIG_SYS_IO_BASE
-#  define CONFIG_SYS_BR4_PRELIM  ((CONFIG_SYS_IO_BASE & BRx_BA_MSK)  |\
-			    BRx_PS_8                   |\
-			    BRx_MS_GPCM_L              |\
-			    BRx_V)
-
-#  define CONFIG_SYS_OR4_PRELIM   (ORxG_AM_MSK                |\
-			    ORxG_SCY_11_CLK            |\
-			    ORxG_EHTR)
-#endif /* CONFIG_SYS_IO_BASE */
-#endif  /* __CONFIG_H */