* Patch by Jim Sandoz, 07 Nov 2002:

  Increase number of network RX buffers (PKTBUFSRX in
  "include/net.h") for EEPRO100 based boards (especially SP8240)
  which showed "Receiver is not ready" errors when U-Boot was
  processing the receive buffers slower than the network controller
  was filling them.

* Get rid of obsolete include/mpc74xx.h

19 files changed, 106 insertions, 124 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 75a5e42..0c0d3d0 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,13 @@
 Changes since for U-Boot 0.1.0:
 ======================================================================
 
+* Patch by Jim Sandoz, 07 Nov 2002:
+  Increase number of network RX buffers (PKTBUFSRX in
+  "include/net.h") for EEPRO100 based boards (especially SP8240)
+  which showed "Receiver is not ready" errors when U-Boot was
+  processing the receive buffers slower than the network controller
+  was filling them.
+
 * Patch by Andreas Oberritter, 09 Nov 2002:
   Change behaviour of NetLoop(): return -1 for errors, filesize
   otherwise; return code 0 is valid an means no file loaded - in this
diff --git a/cpu/74xx_7xx/cache.S b/cpu/74xx_7xx/cache.S
index f35966c..a793d79 100644
--- a/cpu/74xx_7xx/cache.S
+++ b/cpu/74xx_7xx/cache.S
@@ -1,5 +1,5 @@
 #include <config.h>
-#include <mpc74xx.h>
+#include <74xx_7xx.h>
 #include <version.h>
 
 #include <ppc_asm.tmpl>
diff --git a/cpu/mpc8260/interrupts.c b/cpu/mpc8260/interrupts.c
index d804408..9062084 100644
--- a/cpu/mpc8260/interrupts.c
+++ b/cpu/mpc8260/interrupts.c
@@ -29,6 +29,9 @@
 #include <mpc8260.h>
 #include <mpc8260_irq.h>
 #include <asm/processor.h>
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
 
 /****************************************************************************/
 
@@ -292,7 +295,7 @@ void timer_interrupt (struct pt_regs *regs)
 {
 #if defined(CONFIG_WATCHDOG) || defined(CFG_HYMOD_DBLEDS)
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-#endif							/* CONFIG_WATCHDOG */
+#endif	/* CONFIG_WATCHDOG */
 
 	/* Restore Decrementer Count */
 	set_dec (decrementer_count);
@@ -306,19 +309,19 @@ void timer_interrupt (struct pt_regs *regs)
 	if ((timestamp % CFG_HZ) == 0) {
 #if defined(CFG_CMA_LCD_HEARTBEAT)
 		extern void lcd_heartbeat (void);
-#endif							/* CFG_CMA_LCD_HEARTBEAT */
+#endif	/* CFG_CMA_LCD_HEARTBEAT */
 #if defined(CFG_HYMOD_DBLEDS)
 		volatile iop8260_t *iop = &immr->im_ioport;
 		static int shift = 0;
-#endif							/* CFG_HYMOD_DBLEDS */
+#endif	/* CFG_HYMOD_DBLEDS */
 
 #if defined(CFG_CMA_LCD_HEARTBEAT)
 		lcd_heartbeat ();
-#endif							/* CFG_CMA_LCD_HEARTBEAT */
+#endif	/* CFG_CMA_LCD_HEARTBEAT */
 
 #if defined(CONFIG_WATCHDOG)
 		reset_8260_watchdog (immr);
-#endif							/* CONFIG_WATCHDOG */
+#endif	/* CONFIG_WATCHDOG */
 
 #if defined(CFG_HYMOD_DBLEDS)
 		/* hymod daughter board LEDs */
@@ -326,9 +329,13 @@ void timer_interrupt (struct pt_regs *regs)
 			shift = 0;
 		iop->iop_pdatd =
 				(iop->iop_pdatd & ~0x0f000000) | (1 << (24 + shift));
-#endif							/* CFG_HYMOD_DBLEDS */
+#endif	/* CFG_HYMOD_DBLEDS */
 	}
-#endif							/* CONFIG_WATCHDOG || CFG_CMA_LCD_HEARTBEAT */
+#endif	/* CONFIG_WATCHDOG || CFG_CMA_LCD_HEARTBEAT */
+
+#ifdef CONFIG_STATUS_LED
+	status_led_tick (timestamp);
+#endif	/* CONFIG_STATUS_LED */
 }
 
 /****************************************************************************/
diff --git a/doc/README.commands b/doc/README.commands
index 576186e..07825b9 100644
--- a/doc/README.commands
+++ b/doc/README.commands
@@ -90,6 +90,7 @@ setdcr		6		# IBM 4XX DCR registers
 setenv		6
 smcinfo		3
 spiinfo		3
+sspi		4
 stack		5
 step		4
 tftpboot	4
diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h
index 52d3b60..a5308b6 100644
--- a/include/cmd_confdefs.h
+++ b/include/cmd_confdefs.h
@@ -76,6 +76,7 @@
 #define CFG_CMD_HWFLOW	0x0000020000000000	/* RTS/CTS hw flow control	*/
 #define CFG_CMD_SAVES	0x0000040000000000	/* save S record dump		*/
 #define CFG_CMD_VFD	0x0000080000000000	/* Display bitmap on VFD display*/
+#define CFG_CMD_SPI	0x0000100000000000	/* SPI utility			*/
 
 #define CFG_CMD_ALL	0xFFFFFFFFFFFFFFFF	/* ALL commands			*/
 
@@ -110,7 +111,8 @@
 			CFG_CMD_SCSI	| \
 			CFG_CMD_SDRAM	| \
 			CFG_CMD_USB	| \
-			CFG_CMD_VFD	)
+			CFG_CMD_VFD	| \
+			CFG_CMD_SPI	)
 
 /* Default configuration
  */
diff --git a/include/cmd_spi.h b/include/cmd_spi.h
index f0349a1..30927c1 100644
--- a/include/cmd_spi.h
+++ b/include/cmd_spi.h
@@ -38,7 +38,7 @@
   <dout>    - Hexadecimal string that gets sent\n" \
 ),
 
-int do_spi       (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]);
+int do_spi       (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
 #else
 #define CMD_TBL_SPI
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index a3b1296..a9e87c5 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -310,7 +310,7 @@
 
 /*
  * L2CR setup -- make sure this is right for your board!
- * look in include/mpc74xx.h for the defines used here
+ * look in include/74xx_7xx.h for the defines used here
  */
 
 #define CFG_L2
diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h
index fa7e1f6..acd8538 100644
--- a/include/configs/EVB64260.h
+++ b/include/configs/EVB64260.h
@@ -400,7 +400,7 @@
 
 /*-----------------------------------------------------------------------
  * L2CR setup -- make sure this is right for your board!
- * look in include/mpc74xx.h for the defines used here
+ * look in include/74xx_7xx.h for the defines used here
  */
 
 #define CFG_L2
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index 015e621..c7c78ad 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -100,6 +100,7 @@
 					     & ~CFG_CMD_PCI	\
 					     & ~CFG_CMD_PCMCIA	\
 					     & ~CFG_CMD_SCSI	\
+					     & ~CFG_CMD_SPI	\
 					     & ~CFG_CMD_USB	\
 					     & ~CFG_CMD_VFD	)
 
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index f6d186f..14ad313 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -120,6 +120,7 @@
 				 CFG_CMD_PCI	| \
 				 CFG_CMD_PCMCIA | \
 				 CFG_CMD_SCSI	| \
+				 CFG_CMD_SPI	| \
 				 CFG_CMD_VFD	| \
 				 CFG_CMD_USB	) )
 
diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h
index 4978f7e..541cf92 100644
--- a/include/configs/ZUMA.h
+++ b/include/configs/ZUMA.h
@@ -344,7 +344,7 @@
 
 /*-----------------------------------------------------------------------
  * L2CR setup -- make sure this is right for your board!
- * look in include/mpc74xx.h for the defines used here
+ * look in include/74xx_7xx.h for the defines used here
  */
 
 #define CFG_L2
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index f6bc572..5db1f13 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -284,6 +284,7 @@
 					~CFG_CMD_PCI    & \
 					~CFG_CMD_PCMCIA & \
 					~CFG_CMD_SCSI   & \
+					~CFG_CMD_SPI	& \
 					~CFG_CMD_USB	& \
 					~CFG_CMD_VFD	& \
 					~CFG_CMD_DTT )
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index eeae055..af3ba68 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -149,6 +149,7 @@
 					CFG_CMD_PCI	| \
 					CFG_CMD_USB	| \
 					CFG_CMD_SCSI	| \
+					CFG_CMD_SPI	| \
 					CFG_CMD_VFD	| \
 					CFG_CMD_DTT	) )
 
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 92cdcf0..7accf74 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -252,10 +252,12 @@
 
 
 /*
- * select SPI support configuration
+ * Select SPI support configuration
  */
-#define  CONFIG_SOFT_SPI		/* enable SPI driver		*/
-
+#define CONFIG_SOFT_SPI		/* Enable SPI driver */
+#define MAX_SPI_BYTES   4	/* Maximum number of bytes we can handle */
+#undef  DEBUG_SPI               /* Disable SPI debugging */  
+ 
 /*
  * Software (bit-bang) SPI driver configuration
  */
@@ -274,7 +276,7 @@
                         else    immr->im_ioport.iop_pdatd &= ~I2C_MOSI
 #define SPI_SCL(bit)    if(bit) immr->im_ioport.iop_pdatd |=  I2C_SCLK; \
                         else    immr->im_ioport.iop_pdatd &= ~I2C_SCLK
-#define SPI_DELAY	/*udelay(1)*/	/* 1/2 SPI clock duration */
+#define SPI_DELAY                       /* No delay is needed */
 #endif /* CONFIG_SOFT_SPI */
 
 
@@ -485,6 +487,11 @@
 #define CFG_PROMPT_HUSH_PS2     "> "
 #endif
 
+/* When CONFIG_TIMESTAMP is selected, the timestamp (date and time)
+ * of an image is printed by image commands like bootm or iminfo.
+ */
+#define CONFIG_TIMESTAMP
+
 /* What U-Boot subsytems do you want enabled? */
 #ifdef CONFIG_ETHER_ON_FCC
 # define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
@@ -544,6 +551,7 @@
 #define CFG_LOAD_ADDR		0x400000   /* default load address */
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_ALT_MEMTEST                 /* Select full-featured memory test */
 #define CFG_MEMTEST_START	0x2000	/* memtest works from the end of */
 					/* the exception vector table */
 					/* to the end of the DRAM  */
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index b89f503..ec60179 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -294,9 +294,7 @@
  * is on the board edge side of both the LED strip and the DS0-DS7
  * switch.
  */
-#if 0
-# define CONFIG_MISC_INIT_R
-#endif
+#undef	CONFIG_MISC_INIT_R
 
 /* Set to a positive value to delay for running BOOTCOMMAND */
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
@@ -312,6 +310,43 @@
 # define DEBUG_BOOTKEYS		0
 #endif
 
+/* Define this to contain any number of null terminated strings that
+ * will be part of the default enviroment compiled into the boot image.
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"serverip=192.168.123.201\0" \
+	"ipaddr=192.168.123.203\0" \
+	"reprog="\
+		"tftpboot 0x140000 /bdi2000/u-boot.bin; " \
+		"protect off 1:0; " \
+		"erase 1:0; " \
+		"cp.b 140000 40000000 $(filesize); " \
+		"protect on 1:0\0" \
+	"zapenv="\
+		"protect off 1:1; " \
+		"erase 1:1; " \
+		"protect on 1:1\0" \
+	"root-on-initrd="\
+		"setenv bootcmd "\
+		"version;" \
+		"echo;" \
+		"bootp;" \
+		"setenv bootargs root=/dev/ram0 rw " \
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+		"run boot-hook;" \
+		"bootm\0" \
+	"root-on-nfs="\
+		"setenv bootcmd "\
+		"version;" \
+		"echo;" \
+		"bootp;" \
+		"setenv bootargs root=/dev/nfs rw " \
+		"nfsroot=$(serverip):$(rootpath) " \
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\\;" \
+		"run boot-hook;" \
+		"bootm\0" \
+	"boot-hook=echo boot-hook\0"
+
 /* Define a command string that is automatically executed when no character
  * is read on the console interface withing "Boot Delay" after reset.
  */
@@ -352,6 +387,16 @@
 /* Monitor Command Prompt */
 #define CFG_PROMPT		"=> "
 
+#undef  CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+/* When CONFIG_TIMESTAMP is selected, the timestamp (date and time)
+ * of an image is printed by image commands like bootm or iminfo.
+ */
+#define CONFIG_TIMESTAMP
+
 /* What U-Boot subsytems do you want enabled? */
 #ifdef CONFIG_ETHER_ON_FCC
 # define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
@@ -405,9 +450,10 @@
 
 #define CFG_BARGSIZE		CFG_CBSIZE /* Boot Argument Buffer Size	   */
 
-#define CFG_LOAD_ADDR		0x140000   /* default load address */
+#define CFG_LOAD_ADDR		0x400000   /* default load address */
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_ALT_MEMTEST			/* Select full-featured memory test */
 #define CFG_MEMTEST_START	0x2000	/* memtest works from the end of */
 					/* the exception vector table */
 					/* to the end of the DRAM  */
diff --git a/include/lists.h b/include/lists.h
index 3249fca..b42a2fa 100644
--- a/include/lists.h
+++ b/include/lists.h
@@ -39,7 +39,7 @@ void    *ListGetPtrToItem(list_t list, int itemPosition);
 void    ListRemoveItem(list_t list, void *itemDestination, int itemPosition);
 void    ListRemoveItems(list_t list, void *itemsDestination, int firstItemPosition, int numItemsToRemove);
 
-#if 0
+#if 0	/* rarely ever used; kept here for reference just in case ... */
 void    ListDisposePtrList(list_t list);
 void    ListGetItem(list_t list, void *itemDestination, int itemPosition);
 void    ListReplaceItem(list_t list, void *ptrToItem, int itemPosition);
@@ -72,6 +72,6 @@ int     ListGetItemSize(list_t list);
 int     GetIntListFromParmInfo(va_list parmInfo, int numIntegers, list_t *integerList);
 int     ListInsertAfterItem(list_t list, void *ptrToItem, void *ptrToItemToInsertAfter, CompareFunction compareFunction);
 int     ListInsertBeforeItem(list_t list, void *ptrToItem, void *ptrToItemToInsertBefore, CompareFunction compareFunction);
-#endif 0
+#endif /* 0 */
 
 #endif	/* _LISTS_H_ */
diff --git a/include/mpc74xx.h b/include/mpc74xx.h
deleted file mode 100644
index f36392e..0000000
--- a/include/mpc74xx.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber, Mission Critical Linux, Inc. <huber@mclx.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * mpc74xx.h
- *
- * MPC74xx specific definitions
- */
-
-#ifndef __MPC74XX_H__
-#define __MPC74XX_H__
-
-/*----------------------------------------------------------------
- * Exception offsets (PowerPC standard)
- */
-#define EXC_OFF_SYS_RESET        0x0100      /* default system reset offset */
-
-/*----------------------------------------------------------------
- * l2cr values
- */
-#define l2cr 1017
-
-#define L2CR_L2E         0x80000000 /* bit 0 - enable */
-#define L2CR_L2PE        0x40000000 /* bit 1 - data parity */
-#define L2CR_L2SIZ_2M    0x00000000 /* bits 2-3 - 2MB, MPC7400 only! */
-#define L2CR_L2SIZ_1M    0x30000000 /* ... 1MB */
-#define L2CR_L2SIZ_HM    0x20000000 /* ... 512K */
-#define L2CR_L2SIZ_QM    0x10000000 /* ... 256k */
-#define L2CR_L2CLK_1     0x02000000 /* bits 4-6 clock ratio div 1 */
-#define L2CR_L2CLK_1_5   0x04000000 /* bits 4-6 clock ratio div 1.5 */
-#define L2CR_L2CLK_2     0x08000000 /* bits 4-6 clock ratio div 2 */
-#define L2CR_L2CLK_2_5   0x0a000000 /* bits 4-6 clock ratio div 2.5 */
-#define L2CR_L2CLK_3     0x0c000000 /* bits 4-6 clock ratio div 3 */
-#define L2CR_L2CLK_3_5   0x06000000 /* bits 4-6 clock ratio div 3.5 */
-#define L2CR_L2CLK_4     0x0e000000 /* bits 4-6 clock ratio div 4 */
-#define L2CR_L2RAM_BURST 0x01000000 /* bits 7-8 - burst SRAM */
-#define L2CR_DO          0x00400000 /* bit 9 - enable caching of instr. in L2 */
-#define L2CR_L2I         0x00200000 /* bit 10 - global invalidate bit */
-#define L2CR_L2CTL       0x00100000 /* bit 11 - l2 ram control */
-#define L2CR_L2WT        0x00080000 /* bit 12 - l2 write-through */
-#define L2CR_TS          0x00040000 /* bit 13 - test support on */
-#define L2CR_TS_OFF      -L2CR_TS   /* bit 13 - test support off */
-#define L2CR_L2OH_5      0x00000000 /* bits 14-15 - output hold time = short */
-#define L2CR_L2OH_1      0x00010000 /* bits 14-15 - output hold time = medium */
-#define L2CR_L2OH_INV    0x00020000 /* bits 14-15 - output hold time = long */
-#define L2CR_L2IP        0x00000001 /* global invalidate in progress */
-
-/*----------------------------------------------------------------
- * BAT settings.  Look in config_<BOARD>.h for the actual setup
- */
-
-#define BATU_BL_128K             0x00000000
-#define BATU_BL_256K             0x00000004
-#define BATU_BL_512K             0x0000000c
-#define BATU_BL_1M               0x0000001c
-#define BATU_BL_2M               0x0000003c
-#define BATU_BL_4M               0x0000007c
-#define BATU_BL_8M               0x000000fc
-#define BATU_BL_16M              0x000001fc
-#define BATU_BL_32M              0x000003fc
-#define BATU_BL_64M              0x000007fc
-#define BATU_BL_128M             0x00000ffc
-#define BATU_BL_256M             0x00001ffc
-
-#define BATU_VS                  0x00000002
-#define BATU_VP                  0x00000001
-#define BATU_INVALID             0x00000000
-
-#define BATL_WRITETHROUGH        0x00000040	/* W */
-#define BATL_CACHEINHIBIT        0x00000020	/* I */
-#define BATL_COHERENT            0x00000010	/* M */
-#define BATL_GUARDED             0x00000008	/* G */
-
-#define BATL_NO_ACCESS           0x00000000
-#define BATL_RO                  0x00000001
-#define BATL_RW                  0x00000002
-
-#endif  /* __MPC74XX_H__ */
diff --git a/include/net.h b/include/net.h
index d4985ca..396f36e 100644
--- a/include/net.h
+++ b/include/net.h
@@ -27,7 +27,12 @@
  *
  */
 
+#ifndef	CONFIG_EEPRO100
 #define PKTBUFSRX	4
+#else
+#define PKTBUFSRX	8
+#endif
+
 #define PKTALIGN	32
 
 typedef ulong		IPaddr_t;
diff --git a/net/net.c b/net/net.c
index cc3bec6..b9cb67b 100644
--- a/net/net.c
+++ b/net/net.c
@@ -187,7 +187,7 @@ restart:
 	switch (net_check_prereq (protocol)) {
 	case 1:
 		/* network not configured */
-		return 0;
+		return (-1);
 
 #ifdef CONFIG_NET_MULTI
 	case 2:
@@ -257,7 +257,7 @@ restart:
 		if (ctrlc()) {
 		        eth_halt();
 			printf("\nAbort\n");
-			return 0;
+			return (-1);
 		}
 
 
@@ -295,7 +295,7 @@ restart:
 			return NetBootFileXferSize;
 
 		case NETLOOP_FAIL:
-			return 0;
+			return (-1);
 		}
 	}
 }