lpc32xx: add GPIO support

This driver only supports Driver Model, not legacy model.

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>

5 files changed, 349 insertions, 0 deletions

diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
index 81b53ea..a407098 100644
--- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
@@ -9,6 +9,7 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/uart.h>
 #include <asm/io.h>
+#include <dm.h>
 
 static struct clk_pm_regs    *clk  = (struct clk_pm_regs *)CLK_PM_BASE;
 static struct uart_ctrl_regs *ctrl = (struct uart_ctrl_regs *)UART_CTRL_BASE;
@@ -61,3 +62,7 @@ void lpc32xx_i2c_init(unsigned int devnum)
 		ctrl |= CLK_I2C2_ENABLE;
 	writel(ctrl, &clk->i2cclk_ctrl);
 }
+
+U_BOOT_DEVICE(lpc32xx_gpios) = {
+	.name = "gpio_lpc32xx"
+};
diff --git a/arch/arm/include/asm/arch-lpc32xx/gpio.h b/arch/arm/include/asm/arch-lpc32xx/gpio.h
new file mode 100644
index 0000000..3bd94e3
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/gpio.h
@@ -0,0 +1,43 @@
+/*
+ * LPC32xx GPIO interface
+ *
+ * (C) Copyright 2014  DENX Software Engineering GmbH
+ * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/**
+ * GPIO Register map for LPC32xx
+ */
+
+struct gpio_regs {
+	u32 p3_inp_state;
+	u32 p3_outp_set;
+	u32 p3_outp_clr;
+	u32 p3_outp_state;
+	/* Watch out! the following are shared between p2 and p3 */
+	u32 p2_p3_dir_set;
+	u32 p2_p3_dir_clr;
+	u32 p2_p3_dir_state;
+	/* Now back to 'one register for one port' */
+	u32 p2_inp_state;
+	u32 p2_outp_set;
+	u32 p2_outp_clr;
+	u32 reserved1[6];
+	u32 p0_inp_state;
+	u32 p0_outp_set;
+	u32 p0_outp_clr;
+	u32 p0_outp_state;
+	u32 p0_dir_set;
+	u32 p0_dir_clr;
+	u32 p0_dir_state;
+	u32 reserved2;
+	u32 p1_inp_state;
+	u32 p1_outp_set;
+	u32 p1_outp_clr;
+	u32 p1_outp_state;
+	u32 p1_dir_set;
+	u32 p1_dir_clr;
+	u32 p1_dir_state;
+};
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b609e73..7b5178a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -7,3 +7,10 @@ config DM_GPIO
 	  the GPIO uclass. Drivers provide methods to query the
 	  particular GPIOs that they provide. The uclass interface
 	  is defined in include/asm-generic/gpio.h.
+
+config LPC32XX_GPIO
+	bool "LPC32XX GPIO driver"
+	depends on DM
+	default n
+	help
+	  Support for the LPC32XX GPIO driver.
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fe9a3b2..85f71c5 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -41,3 +41,4 @@ obj-$(CONFIG_ADI_GPIO2)	+= adi_gpio2.o
 obj-$(CONFIG_TCA642X)		+= tca642x.o
 oby-$(CONFIG_SX151X)		+= sx151x.o
 obj-$(CONFIG_SUNXI_GPIO)	+= sunxi_gpio.o
+obj-$(CONFIG_LPC32XX_GPIO)	+= lpc32xx_gpio.o
diff --git a/drivers/gpio/lpc32xx_gpio.c b/drivers/gpio/lpc32xx_gpio.c
new file mode 100644
index 0000000..96b3125
--- /dev/null
+++ b/drivers/gpio/lpc32xx_gpio.c
@@ -0,0 +1,293 @@
+/*
+ * LPC32xxGPIO driver
+ *
+ * (C) Copyright 2014  DENX Software Engineering GmbH
+ * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <asm/arch-lpc32xx/cpu.h>
+#include <asm/arch-lpc32xx/gpio.h>
+#include <asm-generic/gpio.h>
+#include <dm.h>
+
+/**
+ * LPC32xx GPIOs work in banks but are non-homogeneous:
+ * - each bank holds a different number of GPIOs
+ * - some GPIOs are input/ouput, some input only, some output only;
+ * - some GPIOs have different meanings as an input and as an output;
+ * - some GPIOs are controlled on a given port and bit index, but
+ *   read on another one.
+*
+ * In order to keep this code simple, GPIOS are considered here as
+ * homogeneous and linear, from 0 to 127.
+ *
+ *	** WARNING #1 **
+ *
+ * Client code is responsible for properly using valid GPIO numbers,
+ * including cases where a single physical GPIO has differing numbers
+ * for setting its direction, reading it and/or writing to it.
+ *
+ *	** WARNING #2 **
+ *
+ * Please read NOTE in description of lpc32xx_gpio_get_function().
+ */
+
+#define LPC32XX_GPIOS 128
+
+struct lpc32xx_gpio_platdata {
+	struct gpio_regs *regs;
+	/* GPIO FUNCTION: SEE WARNING #2 */
+	signed char function[LPC32XX_GPIOS];
+};
+
+/**
+ * We have 4 GPIO ports of 32 bits each
+ */
+
+#define MAX_GPIO 128
+
+#define GPIO_TO_PORT(gpio) ((gpio / 32) & 3)
+#define GPIO_TO_RANK(gpio) (gpio % 32)
+#define GPIO_TO_MASK(gpio) (1 << (gpio % 32))
+
+/**
+ * Configure a GPIO number 'offset' as input
+ */
+
+static int lpc32xx_gpio_direction_input(struct udevice *dev, unsigned offset)
+{
+	int port, mask;
+	struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
+	struct gpio_regs *regs = gpio_platdata->regs;
+
+	port = GPIO_TO_PORT(offset);
+	mask = GPIO_TO_MASK(offset);
+
+	switch (port) {
+	case 0:
+		writel(mask, &regs->p0_dir_clr);
+		break;
+	case 1:
+		writel(mask, &regs->p1_dir_clr);
+		break;
+	case 2:
+		/* ports 2 and 3 share a common direction */
+	case 3:
+		writel(mask, &regs->p2_p3_dir_clr);
+		break;
+	default:
+		return -1;
+	}
+
+	/* GPIO FUNCTION: SEE WARNING #2 */
+	gpio_platdata->function[offset] = GPIOF_INPUT;
+
+	return 0;
+}
+
+/**
+ * Get the value of a GPIO
+ */
+
+static int lpc32xx_gpio_get_value(struct udevice *dev, unsigned offset)
+{
+	int port, rank, mask, value;
+	struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
+	struct gpio_regs *regs = gpio_platdata->regs;
+
+	port = GPIO_TO_PORT(offset);
+
+	switch (port) {
+	case 0:
+		value = readl(&regs->p0_inp_state);
+		break;
+	case 1:
+		value = readl(&regs->p1_inp_state);
+		break;
+	case 2:
+		value = readl(&regs->p2_inp_state);
+		break;
+	case 3:
+		value = readl(&regs->p3_inp_state);
+		break;
+	default:
+		return -1;
+	}
+
+	rank = GPIO_TO_RANK(offset);
+	mask = GPIO_TO_MASK(offset);
+
+	return (value & mask) >> rank;
+}
+
+/**
+ * Set a GPIO
+ */
+
+static int gpio_set(struct udevice *dev, unsigned gpio)
+{
+	int port, mask;
+	struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
+	struct gpio_regs *regs = gpio_platdata->regs;
+
+	port = GPIO_TO_PORT(gpio);
+	mask = GPIO_TO_MASK(gpio);
+
+	switch (port) {
+	case 0:
+		writel(mask, &regs->p0_outp_set);
+		break;
+	case 1:
+		writel(mask, &regs->p1_outp_set);
+		break;
+	case 2:
+		writel(mask, &regs->p2_outp_set);
+		break;
+	case 3:
+		writel(mask, &regs->p3_outp_set);
+		break;
+	default:
+		return -1;
+	}
+	return 0;
+}
+
+/**
+ * Clear a GPIO
+ */
+
+static int gpio_clr(struct udevice *dev, unsigned gpio)
+{
+	int port, mask;
+	struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
+	struct gpio_regs *regs = gpio_platdata->regs;
+
+	port = GPIO_TO_PORT(gpio);
+	mask = GPIO_TO_MASK(gpio);
+
+	switch (port) {
+	case 0:
+		writel(mask, &regs->p0_outp_clr);
+		break;
+	case 1:
+		writel(mask, &regs->p1_outp_clr);
+		break;
+	case 2:
+		writel(mask, &regs->p2_outp_clr);
+		break;
+	case 3:
+		writel(mask, &regs->p3_outp_clr);
+		break;
+	default:
+		return -1;
+	}
+	return 0;
+}
+
+/**
+ * Set the value of a GPIO
+ */
+
+static int lpc32xx_gpio_set_value(struct udevice *dev, unsigned offset,
+				 int value)
+{
+	if (value)
+		return gpio_set(dev, offset);
+	else
+		return gpio_clr(dev, offset);
+}
+
+/**
+ * Configure a GPIO number 'offset' as output with given initial value.
+ */
+
+static int lpc32xx_gpio_direction_output(struct udevice *dev, unsigned offset,
+				       int value)
+{
+	int port, mask;
+	struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
+	struct gpio_regs *regs = gpio_platdata->regs;
+
+	port = GPIO_TO_PORT(offset);
+	mask = GPIO_TO_MASK(offset);
+
+	switch (port) {
+	case 0:
+		writel(mask, &regs->p0_dir_set);
+		break;
+	case 1:
+		writel(mask, &regs->p1_dir_set);
+		break;
+	case 2:
+		/* ports 2 and 3 share a common direction */
+	case 3:
+		writel(mask, &regs->p2_p3_dir_set);
+		break;
+	default:
+		return -1;
+	}
+
+	/* GPIO FUNCTION: SEE WARNING #2 */
+	gpio_platdata->function[offset] = GPIOF_OUTPUT;
+
+	return lpc32xx_gpio_set_value(dev, offset, value);
+}
+
+/**
+ * GPIO functions are supposed to be computed from their current
+ * configuration, but that's way too complicated in LPC32XX. A simpler
+ * approach is used, where the GPIO functions are cached in an array.
+ * When the GPIO is in use, its function is either "input" or "output"
+ * depending on its direction, otherwise its function is "unknown".
+ *
+ *	** NOTE **
+ *
+ * THIS APPROACH WAS CHOSEN DU TO THE COMPLEX NATURE OF THE LPC32XX
+ * GPIOS; DO NOT TAKE THIS AS AN EXAMPLE FOR NEW CODE.
+ */
+
+static int lpc32xx_gpio_get_function(struct udevice *dev, unsigned offset)
+{
+	struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
+	return gpio_platdata->function[offset];
+}
+
+static const struct dm_gpio_ops gpio_lpc32xx_ops = {
+	.direction_input	= lpc32xx_gpio_direction_input,
+	.direction_output	= lpc32xx_gpio_direction_output,
+	.get_value		= lpc32xx_gpio_get_value,
+	.set_value		= lpc32xx_gpio_set_value,
+	.get_function		= lpc32xx_gpio_get_function,
+};
+
+static int lpc32xx_gpio_probe(struct udevice *dev)
+{
+	struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
+	struct gpio_dev_priv *uc_priv = dev->uclass_priv;
+
+	if (dev->of_offset == -1) {
+		/* Tell the uclass how many GPIOs we have */
+		uc_priv->gpio_count = LPC32XX_GPIOS;
+	}
+
+	/* set base address for GPIO registers */
+	gpio_platdata->regs = (struct gpio_regs *)GPIO_BASE;
+
+	/* all GPIO functions are unknown until requested */
+	/* GPIO FUNCTION: SEE WARNING #2 */
+	memset(gpio_platdata->function, GPIOF_UNKNOWN,
+	       sizeof(gpio_platdata->function));
+
+	return 0;
+}
+
+U_BOOT_DRIVER(gpio_lpc32xx) = {
+	.name	= "gpio_lpc32xx",
+	.id	= UCLASS_GPIO,
+	.ops	= &gpio_lpc32xx_ops,
+	.probe	= lpc32xx_gpio_probe,
+	.priv_auto_alloc_size = sizeof(struct lpc32xx_gpio_platdata),
+};