lcd: move platform-specific structs to their own headers

common/lcd code is full of platform-specific code and definitions, which
ideally should reside with the respective driver code. Take a step towards that
goal by moving platform-specific structs from lcd.h to their own header files.

The structs for the generic case (the #else for all the platform-specific
cases) is retained in lcd.h as the default case.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>

5 files changed, 247 insertions, 196 deletions

diff --git a/include/atmel_lcd.h b/include/atmel_lcd.h
new file mode 100644
index 0000000..fa8aa29
--- /dev/null
+++ b/include/atmel_lcd.h
@@ -0,0 +1,38 @@
+/*
+ * atmel_lcd.h - Atmel LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ATMEL_LCD_H_
+#define _ATMEL_LCD_H_
+
+typedef struct vidinfo {
+	ushort vl_col;		/* Number of columns (i.e. 640) */
+	ushort vl_row;		/* Number of rows (i.e. 480) */
+	u_long vl_clk;	/* pixel clock in ps    */
+
+	/* LCD configuration register */
+	u_long vl_sync;		/* Horizontal / vertical sync */
+	u_long vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+	u_long vl_tft;		/* 0 = passive, 1 = TFT */
+	u_long vl_cont_pol_low;	/* contrast polarity is low */
+	u_long vl_clk_pol;	/* clock polarity */
+
+	/* Horizontal control register. */
+	u_long vl_hsync_len;	/* Length of horizontal sync */
+	u_long vl_left_margin;	/* Time from sync to picture */
+	u_long vl_right_margin;	/* Time from picture to sync */
+
+	/* Vertical control register. */
+	u_long vl_vsync_len;	/* Length of vertical sync */
+	u_long vl_upper_margin;	/* Time from sync to picture */
+	u_long vl_lower_margin;	/* Time from picture to sync */
+
+	u_long	mmio;		/* Memory mapped registers */
+} vidinfo_t;
+
+#endif
diff --git a/include/exynos_lcd.h b/include/exynos_lcd.h
new file mode 100644
index 0000000..cf389da
--- /dev/null
+++ b/include/exynos_lcd.h
@@ -0,0 +1,81 @@
+/*
+ * exynos_lcd.h - Exynos LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _EXYNOS_LCD_H_
+#define _EXYNOS_LCD_H_
+
+enum {
+	FIMD_RGB_INTERFACE = 1,
+	FIMD_CPU_INTERFACE = 2,
+};
+
+enum exynos_fb_rgb_mode_t {
+	MODE_RGB_P = 0,
+	MODE_BGR_P = 1,
+	MODE_RGB_S = 2,
+	MODE_BGR_S = 3,
+};
+
+typedef struct vidinfo {
+	ushort vl_col;		/* Number of columns (i.e. 640) */
+	ushort vl_row;		/* Number of rows (i.e. 480) */
+	ushort vl_width;	/* Width of display area in millimeters */
+	ushort vl_height;	/* Height of display area in millimeters */
+
+	/* LCD configuration register */
+	u_char vl_freq;		/* Frequency */
+	u_char vl_clkp;		/* Clock polarity */
+	u_char vl_oep;		/* Output Enable polarity */
+	u_char vl_hsp;		/* Horizontal Sync polarity */
+	u_char vl_vsp;		/* Vertical Sync polarity */
+	u_char vl_dp;		/* Data polarity */
+	u_char vl_bpix;		/* Bits per pixel */
+
+	/* Horizontal control register. Timing from data sheet */
+	u_char vl_hspw;		/* Horz sync pulse width */
+	u_char vl_hfpd;		/* Wait before of line */
+	u_char vl_hbpd;		/* Wait end of line */
+
+	/* Vertical control register. */
+	u_char	vl_vspw;	/* Vertical sync pulse width */
+	u_char	vl_vfpd;	/* Wait before of frame */
+	u_char	vl_vbpd;	/* Wait end of frame */
+	u_char  vl_cmd_allow_len; /* Wait end of frame */
+
+	unsigned int win_id;
+	unsigned int init_delay;
+	unsigned int power_on_delay;
+	unsigned int reset_delay;
+	unsigned int interface_mode;
+	unsigned int mipi_enabled;
+	unsigned int dp_enabled;
+	unsigned int cs_setup;
+	unsigned int wr_setup;
+	unsigned int wr_act;
+	unsigned int wr_hold;
+	unsigned int logo_on;
+	unsigned int logo_width;
+	unsigned int logo_height;
+	int logo_x_offset;
+	int logo_y_offset;
+	unsigned long logo_addr;
+	unsigned int rgb_mode;
+	unsigned int resolution;
+
+	/* parent clock name(MPLL, EPLL or VPLL) */
+	unsigned int pclk_name;
+	/* ratio value for source clock from parent clock. */
+	unsigned int sclk_div;
+
+	unsigned int dual_lcd_enabled;
+} vidinfo_t;
+
+void init_panel_info(vidinfo_t *vid);
+
+#endif
diff --git a/include/lcd.h b/include/lcd.h
index 160f940..fbba6a2 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -41,205 +41,15 @@ int bmp_display(ulong addr, int x, int y);
 void lcd_set_flush_dcache(int flush);
 
 #if defined CONFIG_MPC823
-/*
- * LCD controller stucture for MPC823 CPU
- */
-typedef struct vidinfo {
-	ushort	vl_col;		/* Number of columns (i.e. 640) */
-	ushort	vl_row;		/* Number of rows (i.e. 480) */
-	ushort	vl_width;	/* Width of display area in millimeters */
-	ushort	vl_height;	/* Height of display area in millimeters */
-
-	/* LCD configuration register */
-	u_char	vl_clkp;	/* Clock polarity */
-	u_char	vl_oep;		/* Output Enable polarity */
-	u_char	vl_hsp;		/* Horizontal Sync polarity */
-	u_char	vl_vsp;		/* Vertical Sync polarity */
-	u_char	vl_dp;		/* Data polarity */
-	u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
-	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
-	u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
-	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
-	u_char	vl_tft;		/* 0 = passive, 1 = TFT */
-
-	/* Horizontal control register. Timing from data sheet */
-	ushort	vl_wbl;		/* Wait between lines */
-
-	/* Vertical control register */
-	u_char	vl_vpw;		/* Vertical sync pulse width */
-	u_char	vl_lcdac;	/* LCD AC timing */
-	u_char	vl_wbf;		/* Wait between frames */
-} vidinfo_t;
-
+#include <mpc823_lcd.h>
 #elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
 	defined CONFIG_CPU_MONAHANS
-/*
- * PXA LCD DMA descriptor
- */
-struct pxafb_dma_descriptor {
-	u_long	fdadr;		/* Frame descriptor address register */
-	u_long	fsadr;		/* Frame source address register */
-	u_long	fidr;		/* Frame ID register */
-	u_long	ldcmd;		/* Command register */
-};
-
-/*
- * PXA LCD info
- */
-struct pxafb_info {
-
-	/* Misc registers */
-	u_long	reg_lccr3;
-	u_long	reg_lccr2;
-	u_long	reg_lccr1;
-	u_long	reg_lccr0;
-	u_long	fdadr0;
-	u_long	fdadr1;
-
-	/* DMA descriptors */
-	struct	pxafb_dma_descriptor *	dmadesc_fblow;
-	struct	pxafb_dma_descriptor *	dmadesc_fbhigh;
-	struct	pxafb_dma_descriptor *	dmadesc_palette;
-
-	u_long	screen;		/* physical address of frame buffer */
-	u_long	palette;	/* physical address of palette memory */
-	u_int	palette_size;
-};
-
-/*
- * LCD controller stucture for PXA CPU
- */
-typedef struct vidinfo {
-	ushort	vl_col;		/* Number of columns (i.e. 640) */
-	ushort	vl_row;		/* Number of rows (i.e. 480) */
-	ushort	vl_width;	/* Width of display area in millimeters */
-	ushort	vl_height;	/* Height of display area in millimeters */
-
-	/* LCD configuration register */
-	u_char	vl_clkp;	/* Clock polarity */
-	u_char	vl_oep;		/* Output Enable polarity */
-	u_char	vl_hsp;		/* Horizontal Sync polarity */
-	u_char	vl_vsp;		/* Vertical Sync polarity */
-	u_char	vl_dp;		/* Data polarity */
-	u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
-	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
-	u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
-	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
-	u_char	vl_tft;		/* 0 = passive, 1 = TFT */
-
-	/* Horizontal control register. Timing from data sheet */
-	ushort	vl_hpw;		/* Horz sync pulse width */
-	u_char	vl_blw;		/* Wait before of line */
-	u_char	vl_elw;		/* Wait end of line */
-
-	/* Vertical control register. */
-	u_char	vl_vpw;		/* Vertical sync pulse width */
-	u_char	vl_bfw;		/* Wait before of frame */
-	u_char	vl_efw;		/* Wait end of frame */
-
-	/* PXA LCD controller params */
-	struct	pxafb_info pxa;
-} vidinfo_t;
-
+#include <pxa_lcd.h>
 #elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD)
-
-typedef struct vidinfo {
-	ushort vl_col;		/* Number of columns (i.e. 640) */
-	ushort vl_row;		/* Number of rows (i.e. 480) */
-	u_long vl_clk;	/* pixel clock in ps    */
-
-	/* LCD configuration register */
-	u_long vl_sync;		/* Horizontal / vertical sync */
-	u_long vl_bpix;		/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
-	u_long vl_tft;		/* 0 = passive, 1 = TFT */
-	u_long vl_cont_pol_low;	/* contrast polarity is low */
-	u_long vl_clk_pol;	/* clock polarity */
-
-	/* Horizontal control register. */
-	u_long vl_hsync_len;	/* Length of horizontal sync */
-	u_long vl_left_margin;	/* Time from sync to picture */
-	u_long vl_right_margin;	/* Time from picture to sync */
-
-	/* Vertical control register. */
-	u_long vl_vsync_len;	/* Length of vertical sync */
-	u_long vl_upper_margin;	/* Time from sync to picture */
-	u_long vl_lower_margin;	/* Time from picture to sync */
-
-	u_long	mmio;		/* Memory mapped registers */
-} vidinfo_t;
-
+#include <atmel_lcd.h>
 #elif defined(CONFIG_EXYNOS_FB)
-
-enum {
-	FIMD_RGB_INTERFACE = 1,
-	FIMD_CPU_INTERFACE = 2,
-};
-
-enum exynos_fb_rgb_mode_t {
-	MODE_RGB_P = 0,
-	MODE_BGR_P = 1,
-	MODE_RGB_S = 2,
-	MODE_BGR_S = 3,
-};
-
-typedef struct vidinfo {
-	ushort vl_col;		/* Number of columns (i.e. 640) */
-	ushort vl_row;		/* Number of rows (i.e. 480) */
-	ushort vl_width;	/* Width of display area in millimeters */
-	ushort vl_height;	/* Height of display area in millimeters */
-
-	/* LCD configuration register */
-	u_char vl_freq;		/* Frequency */
-	u_char vl_clkp;		/* Clock polarity */
-	u_char vl_oep;		/* Output Enable polarity */
-	u_char vl_hsp;		/* Horizontal Sync polarity */
-	u_char vl_vsp;		/* Vertical Sync polarity */
-	u_char vl_dp;		/* Data polarity */
-	u_char vl_bpix;		/* Bits per pixel */
-
-	/* Horizontal control register. Timing from data sheet */
-	u_char vl_hspw;		/* Horz sync pulse width */
-	u_char vl_hfpd;		/* Wait before of line */
-	u_char vl_hbpd;		/* Wait end of line */
-
-	/* Vertical control register. */
-	u_char	vl_vspw;	/* Vertical sync pulse width */
-	u_char	vl_vfpd;	/* Wait before of frame */
-	u_char	vl_vbpd;	/* Wait end of frame */
-	u_char  vl_cmd_allow_len; /* Wait end of frame */
-
-	unsigned int win_id;
-	unsigned int init_delay;
-	unsigned int power_on_delay;
-	unsigned int reset_delay;
-	unsigned int interface_mode;
-	unsigned int mipi_enabled;
-	unsigned int dp_enabled;
-	unsigned int cs_setup;
-	unsigned int wr_setup;
-	unsigned int wr_act;
-	unsigned int wr_hold;
-	unsigned int logo_on;
-	unsigned int logo_width;
-	unsigned int logo_height;
-	int logo_x_offset;
-	int logo_y_offset;
-	unsigned long logo_addr;
-	unsigned int rgb_mode;
-	unsigned int resolution;
-
-	/* parent clock name(MPLL, EPLL or VPLL) */
-	unsigned int pclk_name;
-	/* ratio value for source clock from parent clock. */
-	unsigned int sclk_div;
-
-	unsigned int dual_lcd_enabled;
-} vidinfo_t;
-
-void init_panel_info(vidinfo_t *vid);
-
+#include <exynos_lcd.h>
 #else
-
 typedef struct vidinfo {
 	ushort	vl_col;		/* Number of columns (i.e. 160) */
 	ushort	vl_row;		/* Number of rows (i.e. 100) */
@@ -250,8 +60,7 @@ typedef struct vidinfo {
 
 	void	*priv;		/* Pointer to driver-specific data */
 } vidinfo_t;
-
-#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */
+#endif
 
 extern vidinfo_t panel_info;
 
diff --git a/include/mpc823_lcd.h b/include/mpc823_lcd.h
new file mode 100644
index 0000000..7e210e3
--- /dev/null
+++ b/include/mpc823_lcd.h
@@ -0,0 +1,43 @@
+/*
+ * mpc823_lcd.h - MPC823 LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _MPC823_LCD_H_
+#define _MPC823_LCD_H_
+
+/*
+ * LCD controller stucture for MPC823 CPU
+ */
+typedef struct vidinfo {
+	ushort	vl_col;		/* Number of columns (i.e. 640) */
+	ushort	vl_row;		/* Number of rows (i.e. 480) */
+	ushort	vl_width;	/* Width of display area in millimeters */
+	ushort	vl_height;	/* Height of display area in millimeters */
+
+	/* LCD configuration register */
+	u_char	vl_clkp;	/* Clock polarity */
+	u_char	vl_oep;		/* Output Enable polarity */
+	u_char	vl_hsp;		/* Horizontal Sync polarity */
+	u_char	vl_vsp;		/* Vertical Sync polarity */
+	u_char	vl_dp;		/* Data polarity */
+	u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
+	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
+	u_char	vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
+	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
+	u_char	vl_tft;		/* 0 = passive, 1 = TFT */
+
+	/* Horizontal control register. Timing from data sheet */
+	ushort	vl_wbl;		/* Wait between lines */
+
+	/* Vertical control register */
+	u_char	vl_vpw;		/* Vertical sync pulse width */
+	u_char	vl_lcdac;	/* LCD AC timing */
+	u_char	vl_wbf;		/* Wait between frames */
+} vidinfo_t;
+
+#endif
diff --git a/include/pxa_lcd.h b/include/pxa_lcd.h
new file mode 100644
index 0000000..723f6ab
--- /dev/null
+++ b/include/pxa_lcd.h
@@ -0,0 +1,80 @@
+/*
+ * pxa_lcd.h - PXA LCD Controller structures
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _PXA_LCD_H_
+#define _PXA_LCD_H_
+
+/*
+ * PXA LCD DMA descriptor
+ */
+struct pxafb_dma_descriptor {
+	u_long	fdadr;		/* Frame descriptor address register */
+	u_long	fsadr;		/* Frame source address register */
+	u_long	fidr;		/* Frame ID register */
+	u_long	ldcmd;		/* Command register */
+};
+
+/*
+ * PXA LCD info
+ */
+struct pxafb_info {
+	/* Misc registers */
+	u_long	reg_lccr3;
+	u_long	reg_lccr2;
+	u_long	reg_lccr1;
+	u_long	reg_lccr0;
+	u_long	fdadr0;
+	u_long	fdadr1;
+
+	/* DMA descriptors */
+	struct	pxafb_dma_descriptor *dmadesc_fblow;
+	struct	pxafb_dma_descriptor *dmadesc_fbhigh;
+	struct	pxafb_dma_descriptor *dmadesc_palette;
+
+	u_long	screen;		/* physical address of frame buffer */
+	u_long	palette;	/* physical address of palette memory */
+	u_int	palette_size;
+};
+
+/*
+ * LCD controller stucture for PXA CPU
+ */
+typedef struct vidinfo {
+	ushort	vl_col;		/* Number of columns (i.e. 640) */
+	ushort	vl_row;		/* Number of rows (i.e. 480) */
+	ushort	vl_width;	/* Width of display area in millimeters */
+	ushort	vl_height;	/* Height of display area in millimeters */
+
+	/* LCD configuration register */
+	u_char	vl_clkp;	/* Clock polarity */
+	u_char	vl_oep;		/* Output Enable polarity */
+	u_char	vl_hsp;		/* Horizontal Sync polarity */
+	u_char	vl_vsp;		/* Vertical Sync polarity */
+	u_char	vl_dp;		/* Data polarity */
+	u_char	vl_bpix;/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
+	u_char	vl_splt;/* Split display, 0 = single-scan, 1 = dual-scan */
+	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
+	u_char	vl_tft;		/* 0 = passive, 1 = TFT */
+
+	/* Horizontal control register. Timing from data sheet */
+	ushort	vl_hpw;		/* Horz sync pulse width */
+	u_char	vl_blw;		/* Wait before of line */
+	u_char	vl_elw;		/* Wait end of line */
+
+	/* Vertical control register. */
+	u_char	vl_vpw;		/* Vertical sync pulse width */
+	u_char	vl_bfw;		/* Wait before of frame */
+	u_char	vl_efw;		/* Wait end of frame */
+
+	/* PXA LCD controller params */
+	struct	pxafb_info pxa;
+} vidinfo_t;
+
+#endif