imx: ventana: add econfig command

The Gateworks Ventana EEPROM contains a set of configuration bits that
affect the removal of device-tree nodes that support peripherals that do not
exist on sub-loaded boards. This patch adds:
 - a structure to define a config bit name, dt node alias, bit position
 - an array of supported configuration items
 - an econfig command to get/set/list configuration bits
 - use of the array when adjusting the FDT prior to boot

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

4 files changed, 198 insertions, 86 deletions

diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c
index e90186e..3edc915 100644
--- a/board/gateworks/gw_ventana/eeprom.c
+++ b/board/gateworks/gw_ventana/eeprom.c
@@ -6,7 +6,10 @@
  */
 
 #include <common.h>
+#include <errno.h>
 #include <i2c.h>
+#include <malloc.h>
+#include <asm/bitops.h>
 
 #include "gsc.h"
 #include "ventana_eeprom.h"
@@ -38,14 +41,12 @@ read_eeprom(int bus, struct ventana_board_info *info)
 	/* read eeprom config section */
 	if (gsc_i2c_read(GSC_EEPROM_ADDR, 0x00, 1, buf, sizeof(*info))) {
 		puts("EEPROM: Failed to read EEPROM\n");
-		info->model[0] = 0;
 		return GW_UNKNOWN;
 	}
 
 	/* sanity checks */
 	if (info->model[0] != 'G' || info->model[1] != 'W') {
 		puts("EEPROM: Invalid Model in EEPROM\n");
-		info->model[0] = 0;
 		return GW_UNKNOWN;
 	}
 
@@ -55,7 +56,6 @@ read_eeprom(int bus, struct ventana_board_info *info)
 	if ((info->chksum[0] != chksum>>8) ||
 	    (info->chksum[1] != (chksum&0xff))) {
 		puts("EEPROM: Failed EEPROM checksum\n");
-		info->model[0] = 0;
 		return GW_UNKNOWN;
 	}
 
@@ -87,3 +87,165 @@ read_eeprom(int bus, struct ventana_board_info *info)
 	}
 	return type;
 }
+
+/* list of config bits that the bootloader will remove from dtb if not set */
+struct ventana_eeprom_config econfig[] = {
+	{ "eth0", "ethernet0", EECONFIG_ETH0 },
+	{ "eth1", "ethernet1", EECONFIG_ETH1 },
+	{ "sata", "ahci0", EECONFIG_SATA },
+	{ "pcie", NULL, EECONFIG_PCIE},
+	{ "lvds0", NULL, EECONFIG_LVDS0 },
+	{ "lvds1", NULL, EECONFIG_LVDS1 },
+	{ "usb0", NULL, EECONFIG_USB0 },
+	{ "usb1", NULL, EECONFIG_USB1 },
+	{ "mmc0", NULL, EECONFIG_SD0 },
+	{ "mmc1", NULL, EECONFIG_SD1 },
+	{ "mmc2", NULL, EECONFIG_SD2 },
+	{ "mmc3", NULL, EECONFIG_SD3 },
+	{ "uart0", NULL, EECONFIG_UART0 },
+	{ "uart1", NULL, EECONFIG_UART1 },
+	{ "uart2", NULL, EECONFIG_UART2 },
+	{ "uart3", NULL, EECONFIG_UART3 },
+	{ "uart4", NULL, EECONFIG_UART4 },
+	{ "ipu0", NULL, EECONFIG_IPU0 },
+	{ "ipu1", NULL, EECONFIG_IPU1 },
+	{ "can0", NULL, EECONFIG_FLEXCAN },
+	{ "i2c0", NULL, EECONFIG_I2C0 },
+	{ "i2c1", NULL, EECONFIG_I2C1 },
+	{ "i2c2", NULL, EECONFIG_I2C2 },
+	{ "vpu", NULL, EECONFIG_VPU },
+	{ "csi0", NULL, EECONFIG_CSI0 },
+	{ "csi1", NULL, EECONFIG_CSI1 },
+	{ "spi0", NULL, EECONFIG_ESPCI0 },
+	{ "spi1", NULL, EECONFIG_ESPCI1 },
+	{ "spi2", NULL, EECONFIG_ESPCI2 },
+	{ "spi3", NULL, EECONFIG_ESPCI3 },
+	{ "spi4", NULL, EECONFIG_ESPCI4 },
+	{ "spi5", NULL, EECONFIG_ESPCI5 },
+	{ "gps", "pps", EECONFIG_GPS },
+	{ "hdmi_in", NULL, EECONFIG_HDMI_IN },
+	{ "hdmi_out", NULL, EECONFIG_HDMI_OUT },
+	{ "cvbs_in", NULL, EECONFIG_VID_IN },
+	{ "cvbs_out", NULL, EECONFIG_VID_OUT },
+	{ "nand", NULL, EECONFIG_NAND },
+	{ /* Sentinel */ }
+};
+
+#ifdef CONFIG_CMD_EECONFIG
+static struct ventana_eeprom_config *get_config(const char *name)
+{
+	struct ventana_eeprom_config *cfg = econfig;
+
+	while (cfg->name) {
+		if (0 == strcmp(name, cfg->name))
+			return cfg;
+		cfg++;
+	}
+	return NULL;
+}
+
+static u8 econfig_bytes[sizeof(ventana_info.config)];
+static int econfig_init = -1;
+
+int do_econfig(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	struct ventana_eeprom_config *cfg;
+	struct ventana_board_info *info = &ventana_info;
+	int i;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	/* initialize */
+	if (econfig_init != 1) {
+		memcpy(econfig_bytes, info->config, sizeof(econfig_bytes));
+		econfig_init = 1;
+	}
+
+	/* list configs */
+	if ((strncmp(argv[1], "list", 4) == 0)) {
+		cfg = econfig;
+		while (cfg->name) {
+			printf("%s: %d\n", cfg->name,
+			       test_bit(cfg->bit, econfig_bytes) ?  1 : 0);
+			cfg++;
+		}
+	}
+
+	/* save */
+	else if ((strncmp(argv[1], "save", 4) == 0)) {
+		unsigned char *buf = (unsigned char *)info;
+		int chksum;
+
+		/* calculate new checksum */
+		memcpy(info->config, econfig_bytes, sizeof(econfig_bytes));
+		for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
+			chksum += buf[i];
+		debug("old chksum:0x%04x\n",
+		      (info->chksum[0] << 8) | info->chksum[1]);
+		debug("new chksum:0x%04x\n", chksum);
+		info->chksum[0] = chksum >> 8;
+		info->chksum[1] = chksum & 0xff;
+
+		/* write new config data */
+		if (gsc_i2c_write(GSC_EEPROM_ADDR, info->config - (u8 *)info,
+				  1, econfig_bytes, sizeof(econfig_bytes))) {
+			printf("EEPROM: Failed updating config\n");
+			return CMD_RET_FAILURE;
+		}
+
+		/* write new config data */
+		if (gsc_i2c_write(GSC_EEPROM_ADDR, info->chksum - (u8 *)info,
+				  1, info->chksum, 2)) {
+			printf("EEPROM: Failed updating checksum\n");
+			return CMD_RET_FAILURE;
+		}
+
+		printf("Config saved to EEPROM\n");
+	}
+
+	/* get config */
+	else if (argc == 2) {
+		cfg = get_config(argv[1]);
+		if (cfg) {
+			printf("%s: %d\n", cfg->name,
+			       test_bit(cfg->bit, econfig_bytes) ? 1 : 0);
+		} else {
+			printf("invalid config: %s\n", argv[1]);
+			return CMD_RET_FAILURE;
+		}
+	}
+
+	/* set config */
+	else if (argc == 3) {
+		cfg = get_config(argv[1]);
+		if (cfg) {
+			if (simple_strtol(argv[2], NULL, 10)) {
+				test_and_set_bit(cfg->bit, econfig_bytes);
+				printf("Enabled %s\n", cfg->name);
+			} else {
+				test_and_clear_bit(cfg->bit, econfig_bytes);
+				printf("Disabled %s\n", cfg->name);
+			}
+		} else {
+			printf("invalid config: %s\n", argv[1]);
+			return CMD_RET_FAILURE;
+		}
+	}
+
+	else
+		return CMD_RET_USAGE;
+
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+	econfig, 3, 0, do_econfig,
+	"EEPROM configuration",
+	"list - list config\n"
+	"save - save config to EEPROM\n"
+	"<name> - get config 'name'\n"
+	"<name> [0|1] - set config 'name' to value\n"
+);
+
+#endif /* CONFIG_CMD_EECONFIG */
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 2915b90..a222921 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -50,10 +50,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define GP_RS232_EN	IMX_GPIO_NR(2, 11)
 #define GP_MSATA_SEL	IMX_GPIO_NR(2, 8)
 
-/* I2C bus numbers */
-#define I2C_GSC		0
-#define I2C_PMIC	1
-
 #define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
 	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
 	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
@@ -89,7 +85,7 @@ DECLARE_GLOBAL_DATA_PTR;
  * EEPROM board info struct populated by read_eeprom so that we only have to
  * read it once.
  */
-static struct ventana_board_info ventana_info;
+struct ventana_board_info ventana_info;
 
 int board_type;
 
@@ -922,7 +918,7 @@ int power_init_board(void)
 
 	/* configure PFUZE100 PMIC */
 	if (board_type == GW54xx || board_type == GW54proto) {
-		power_pfuze100_init(I2C_PMIC);
+		power_pfuze100_init(CONFIG_I2C_PMIC);
 		p = pmic_get("PFUZE100");
 		if (p && !pmic_probe(p)) {
 			pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
@@ -944,7 +940,7 @@ int power_init_board(void)
 
 	/* configure LTC3676 PMIC */
 	else {
-		power_ltc3676_init(I2C_PMIC);
+		power_ltc3676_init(CONFIG_I2C_PMIC);
 		p = pmic_get("LTC3676_PMIC");
 		if (p && !pmic_probe(p)) {
 			puts("PMIC:  LTC3676\n");
@@ -1175,7 +1171,7 @@ int board_init(void)
 	setup_sata();
 #endif
 	/* read Gateworks EEPROM into global struct (used later) */
-	board_type = read_eeprom(I2C_GSC, &ventana_info);
+	board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
 
 	/* board-specifc GPIO iomux */
 	SETUP_IOMUX_PADS(gw_gpio_pads);
@@ -1223,7 +1219,7 @@ int checkboard(void)
 		return 0;
 
 	/* Display GSC firmware revision/CRC/status */
-	i2c_set_bus_num(I2C_GSC);
+	i2c_set_bus_num(CONFIG_I2C_GSC);
 	if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_FWVER, 1, buf, 1)) {
 		printf("GSC:   v%d", buf[0]);
 		if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_STATUS, 1, buf, 4)) {
@@ -1353,7 +1349,7 @@ int misc_init_r(void)
 	 *
 	 * Disable the boot watchdog and display/clear the timeout flag if set
 	 */
-	i2c_set_bus_num(I2C_GSC);
+	i2c_set_bus_num(CONFIG_I2C_GSC);
 	if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1)) {
 		reg |= (1 << GSC_SC_CTRL1_WDDIS);
 		if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1))
@@ -1374,74 +1370,6 @@ int misc_init_r(void)
 
 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 
-/* FDT aliases associated with EEPROM config bits */
-const char *fdt_aliases[] = {
-	"ethernet0",
-	"ethernet1",
-	"hdmi_out",
-	"ahci0",
-	"pcie",
-	"ssi0",
-	"ssi1",
-	"lcd0",
-	"lvds0",
-	"lvds1",
-	"usb0",
-	"usb1",
-	"mmc0",
-	"mmc1",
-	"mmc2",
-	"mmc3",
-	"uart0",
-	"uart1",
-	"uart2",
-	"uart3",
-	"uart4",
-	"ipu0",
-	"ipu1",
-	"can0",
-	"mipi_dsi",
-	"mipi_csi",
-	"tzasc0",
-	"tzasc1",
-	"i2c0",
-	"i2c1",
-	"i2c2",
-	"vpu",
-	"csi0",
-	"csi1",
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	"spi0",
-	"spi1",
-	"spi2",
-	"spi3",
-	"spi4",
-	"spi5",
-	NULL,
-	NULL,
-	"pps",
-	NULL,
-	NULL,
-	NULL,
-	"hdmi_in",
-	"cvbs_out",
-	"cvbs_in",
-	"nand",
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-};
-
 /*
  * called prior to booting kernel or by 'fdt boardsetup' command
  *
@@ -1453,8 +1381,8 @@ const char *fdt_aliases[] = {
  */
 void ft_board_setup(void *blob, bd_t *bd)
 {
-	int bit;
 	struct ventana_board_info *info = &ventana_info;
+	struct ventana_eeprom_config *cfg;
 	struct node_info nodes[] = {
 		{ "sst,w25q256",          MTD_DEV_TYPE_NOR, },  /* SPI flash */
 		{ "fsl,imx6q-gpmi-nand",  MTD_DEV_TYPE_NAND, }, /* NAND flash */
@@ -1489,9 +1417,17 @@ void ft_board_setup(void *blob, bd_t *bd)
 	 *  remove nodes by alias path if EEPROM config tells us the
 	 *  peripheral is not loaded on the board.
 	 */
-	for (bit = 0; bit < 64; bit++) {
-		if (!test_bit(bit, info->config))
-			fdt_del_node_and_alias(blob, fdt_aliases[bit]);
+	if (getenv("fdt_noconfig")) {
+		puts("   Skiping periperhal config (fdt_noconfig defined)\n");
+		return;
+	}
+	cfg = econfig;
+	while (cfg->name) {
+		if (!test_bit(cfg->bit, info->config)) {
+			fdt_del_node_and_alias(blob, cfg->dtalias ?
+					       cfg->dtalias : cfg->name);
+		}
+		cfg++;
 	}
 }
 #endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h
index 5b065be..d64b910 100644
--- a/board/gateworks/gw_ventana/ventana_eeprom.h
+++ b/board/gateworks/gw_ventana/ventana_eeprom.h
@@ -110,8 +110,19 @@ enum {
 	GW53xx,
 	GW54xx,
 	GW_UNKNOWN,
+	GW_BADCRC,
 };
 
+/* config items */
+struct ventana_eeprom_config {
+	const char *name;	/* name of item */
+	const char *dtalias;	/* name of dt node to remove if not set */
+	int bit;		/* bit within config */
+};
+
+extern struct ventana_eeprom_config econfig[];
+extern struct ventana_board_info ventana_info;
+
 int read_eeprom(int bus, struct ventana_board_info *);
 
 #endif
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 8197a72..b991b09 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -95,7 +95,9 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_SPEED		  100000
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_I2C_GSC			0
+#define CONFIG_I2C_PMIC			1
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
@@ -164,6 +166,7 @@
 #define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_GSC
+#define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 #define CONFIG_CMD_UBI
 #define CONFIG_RBTREE
 #define CONFIG_LZO