MLK-10774-19 imx:mx6qsabreauto update bsp

Update bsp and add configuration file

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>

15 files changed, 571 insertions, 112 deletions

diff --git a/board/freescale/mx6qsabreauto/mx6dl.cfg b/board/freescale/mx6qsabreauto/mx6dl.cfg
index 89078e5..f7f4062 100644
--- a/board/freescale/mx6qsabreauto/mx6dl.cfg
+++ b/board/freescale/mx6qsabreauto/mx6dl.cfg
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013-2015 Freescale Semiconductor, Inc.
  * Jason Liu <r64343@freescale.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -11,13 +11,34 @@
  */
 /* image version */
 
+#define __ASSEMBLY__
+#include <config.h>
+
 IMAGE_VERSION 2
 
 /*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
+ * Boot Device : one of spi, sd, eimnor, nand, sata:
+ * spinor: flash_offset: 0x0400
+ * nand:   flash_offset: 0x0400
+ * sata:   flash_offset: 0x0400
+ * sd/mmc: flash_offset: 0x0400
+ * eimnor: flash_offset: 0x1000
  */
+
+#if defined(CONFIG_SYS_BOOT_EIMNOR)
+BOOT_FROM	nor
+#else /* others has the same flash_offset as sd */
 BOOT_FROM	sd
+#endif
+
+#ifdef CONFIG_USE_PLUGIN
+/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
+PLUGIN	board/freescale/mx6qsabreauto/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_SECURE_BOOT
+CSF 0x2000
+#endif
 
 /*
  * Device Configuration Data (DCD)
@@ -128,3 +149,4 @@ DATA 4 0x020e0010 0xF00000CF
 /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
 DATA 4 0x020e0018 0x007F007F
 DATA 4 0x020e001c 0x007F007F
+#endif
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index b76e4eb..27f3087 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012-2015 Freescale Semiconductor, Inc.
  *
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  *
@@ -27,13 +27,28 @@
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/imx-common/video.h>
 #include <asm/arch/crm_regs.h>
-#include <pca953x.h>
 #include <power/pmic.h>
 #include <power/pfuze100_pmic.h>
 #include "../common/pfuze.h"
 
+#ifdef CONFIG_CMD_SATA
+#include <asm/imx-common/sata.h>
+#endif
+#ifdef CONFIG_FASTBOOT
+#include <fastboot.h>
+#ifdef CONFIG_ANDROID_RECOVERY
+#include <recovery.h>
+#endif
+#endif /*CONFIG_FASTBOOT*/
+
+#ifdef CONFIG_MAX7310_IOEXP
+#include <gpio_exp.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
+#define I2C_EXP_RST IMX_GPIO_NR(1, 15)
+#define I2C3_STEER  IMX_GPIO_NR(5, 4)
 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
 	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |			\
 	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
@@ -42,6 +57,11 @@ DECLARE_GLOBAL_DATA_PTR;
 	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |			\
 	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 
+/*Need more drive strength for SD1 slot on base board*/
+#define USDHC1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |            \
+	PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW |               \
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
 #define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
 	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
 
@@ -56,6 +76,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 
+#define SPI_PAD_CTRL (PAD_CTL_HYS |				\
+	PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm     | PAD_CTL_SRE_FAST)
+
 #define WEIM_NOR_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |          \
 	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
 	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST)
@@ -90,6 +114,7 @@ static iomux_v3_cfg_t const enet_pads[] = {
 	MX6_PAD_RGMII_RD2__RGMII_RD2	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_RD3__RGMII_RD3	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_GPIO_16__ENET_REF_CLK		| MUX_PAD_CTRL(ENET_PAD_CTRL),
 };
 
 /* I2C2 PMIC, iPod, Tuner, Codec, Touch, HDMI EDID, MIPI CSI2 card */
@@ -106,25 +131,6 @@ static struct i2c_pads_info i2c_pad_info1 = {
 	}
 };
 
-#ifndef CONFIG_SYS_FLASH_CFI
-/*
- * I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor,
- * Compass Sensor, Accelerometer, Res Touch
- */
-static struct i2c_pads_info i2c_pad_info2 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
-		.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
-		.gp = IMX_GPIO_NR(1, 3)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
-		.gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
-		.gp = IMX_GPIO_NR(3, 18)
-	}
-};
-#endif
-
 static iomux_v3_cfg_t const i2c3_pads[] = {
 	MX6_PAD_EIM_A24__GPIO5_IO04		| MUX_PAD_CTRL(NO_PAD_CTRL),
 };
@@ -133,44 +139,7 @@ static iomux_v3_cfg_t const port_exp[] = {
 	MX6_PAD_SD2_DAT0__GPIO1_IO15		| MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
-/*Define for building port exp gpio, pin starts from 0*/
-#define PORTEXP_IO_NR(chip, pin) \
-	((chip << 5) + pin)
-
-/*Get the chip addr from a ioexp gpio*/
-#define PORTEXP_IO_TO_CHIP(gpio_nr) \
-	(gpio_nr >> 5)
-
-/*Get the pin number from a ioexp gpio*/
-#define PORTEXP_IO_TO_PIN(gpio_nr) \
-	(gpio_nr & 0x1f)
-
-static int port_exp_direction_output(unsigned gpio, int value)
-{
-	int ret;
-
-	i2c_set_bus_num(2);
-	ret = i2c_probe(PORTEXP_IO_TO_CHIP(gpio));
-	if (ret)
-		return ret;
-
-	ret = pca953x_set_dir(PORTEXP_IO_TO_CHIP(gpio),
-		(1 << PORTEXP_IO_TO_PIN(gpio)),
-		(PCA953X_DIR_OUT << PORTEXP_IO_TO_PIN(gpio)));
-
-	if (ret)
-		return ret;
-
-	ret = pca953x_set_val(PORTEXP_IO_TO_CHIP(gpio),
-		(1 << PORTEXP_IO_TO_PIN(gpio)),
-		(value << PORTEXP_IO_TO_PIN(gpio)));
-
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
+#ifdef CONFIG_SYS_USE_EIMNOR
 static iomux_v3_cfg_t const eimnor_pads[] = {
 	MX6_PAD_EIM_D16__EIM_DATA16	| MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
 	MX6_PAD_EIM_D17__EIM_DATA17	| MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL),
@@ -239,12 +208,26 @@ static void setup_iomux_eimnor(void)
 
 	eimnor_cs_setup();
 }
+#endif
 
 static void setup_iomux_enet(void)
 {
 	imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
 }
 
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+	/*To avoid pin conflict with NAND, set usdhc1 to 4 pins*/
+	MX6_PAD_SD1_CLK__SD1_CLK	| MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+	MX6_PAD_SD1_CMD__SD1_CMD	| MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+	MX6_PAD_SD1_DAT0__SD1_DATA0	| MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+	MX6_PAD_SD1_DAT1__SD1_DATA1	| MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+	MX6_PAD_SD1_DAT2__SD1_DATA2	| MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+	MX6_PAD_SD1_DAT3__SD1_DATA3	| MUX_PAD_CTRL(USDHC1_PAD_CTRL),
+
+	/*CD pin*/
+	MX6_PAD_GPIO_1__GPIO1_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
 static iomux_v3_cfg_t const usdhc3_pads[] = {
 	MX6_PAD_SD3_CLK__SD3_CLK	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6_PAD_SD3_CMD__SD3_CMD	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -266,22 +249,133 @@ static void setup_iomux_uart(void)
 }
 
 #ifdef CONFIG_FSL_ESDHC
-static struct fsl_esdhc_cfg usdhc_cfg[1] = {
+
+#define USDHC1_CD_GPIO	IMX_GPIO_NR(1, 1)
+#define USDHC3_CD_GPIO	IMX_GPIO_NR(6, 15)
+
+static struct fsl_esdhc_cfg usdhc_cfg[2] = {
+	{USDHC1_BASE_ADDR, 0, 4},
 	{USDHC3_BASE_ADDR},
 };
 
+int mmc_get_env_devno(void)
+{
+	u32 soc_sbmr = readl(SRC_BASE_ADDR + 0x4);
+	u32 dev_no;
+	u32 bootsel;
+
+	bootsel = (soc_sbmr & 0x000000FF) >> 6 ;
+
+	/* If not boot from sd/mmc, use default value */
+	if (bootsel != 1)
+		return CONFIG_SYS_MMC_ENV_DEV;
+
+	/* BOOT_CFG2[3] and BOOT_CFG2[4] */
+	dev_no = (soc_sbmr & 0x00001800) >> 11;
+
+	/* need ubstract 1 to map to the mmc3 device id
+	 * see the comments in board_mmc_init function
+	 */
+	if (2 == dev_no)
+		dev_no--;
+
+	return dev_no;
+}
+
+int mmc_map_to_kernel_blk(int dev_no)
+{
+	if (1 == dev_no)
+		dev_no = 2;
+
+	return dev_no;
+}
+
 int board_mmc_getcd(struct mmc *mmc)
 {
-	gpio_direction_input(IMX_GPIO_NR(6, 15));
-	return !gpio_get_value(IMX_GPIO_NR(6, 15));
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC1_BASE_ADDR:
+		gpio_direction_input(USDHC1_CD_GPIO);
+		ret = !gpio_get_value(USDHC1_CD_GPIO);
+		break;
+	case USDHC3_BASE_ADDR:
+		gpio_direction_input(USDHC3_CD_GPIO);
+		ret = !gpio_get_value(USDHC3_CD_GPIO);
+		break;
+	}
+
+	return ret;
 }
 
 int board_mmc_init(bd_t *bis)
 {
-	imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+	int i;
+
+	/*
+	* According to the board_mmc_init() the following map is done:
+	* (U-boot device node)    (Physical Port)
+	* mmc0				USDHC1
+	* mmc1				USDHC3
+	*/
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		switch (i) {
+		case 0:
+			imx_iomux_v3_setup_multiple_pads(
+				usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+			gpio_direction_input(USDHC1_CD_GPIO);
+			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+			break;
+		case 1:
+			imx_iomux_v3_setup_multiple_pads(
+				usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+			gpio_direction_input(USDHC3_CD_GPIO);
+			usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+			break;
+		default:
+			printf("Warning: you configured more USDHC controllers"
+				"(%d) than supported by the board\n", i + 1);
+			return 0;
+			}
+
+		if (fsl_esdhc_initialize(bis, &usdhc_cfg[i]))
+			printf("Warning: failed to initialize mmc dev %d\n", i);
+	}
+
+	return 0;
+}
+
+int check_mmc_autodetect(void)
+{
+	char *autodetect_str = getenv("mmcautodetect");
+
+	if ((autodetect_str != NULL) &&
+		(strcmp(autodetect_str, "yes") == 0)) {
+		return 1;
+	}
+
+	return 0;
+}
+
+void board_late_mmc_env_init(void)
+{
+	char cmd[32];
+	char mmcblk[32];
+	u32 dev_no = mmc_get_env_devno();
 
-	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+	if (!check_mmc_autodetect())
+		return;
+
+	setenv_ulong("mmcdev", dev_no);
+
+	/* Set mmcblk env */
+	sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw",
+		mmc_map_to_kernel_blk(dev_no));
+	setenv("mmcroot", mmcblk);
+
+	sprintf(cmd, "mmc dev %d", dev_no);
+	run_command(cmd, 0);
 }
 #endif
 
@@ -354,9 +448,22 @@ int board_phy_config(struct phy_device *phydev)
 	return 0;
 }
 
+static int setup_fec(void)
+{
+	int ret;
+
+	imx_iomux_set_gpr_register(1, 21, 1, 1);
+	ret = enable_fec_anatop_clock(0, ENET_125MHZ);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 int board_eth_init(bd_t *bis)
 {
 	setup_iomux_enet();
+	setup_fec();
 
 	return cpu_eth_init(bis);
 }
@@ -451,15 +558,87 @@ int overwrite_console(void)
 	return 1;
 }
 
+#ifdef CONFIG_MAX7310_IOEXP
+/*
+ * I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor,
+ * Compass Sensor, Accelerometer, Res Touch
+ */
+static struct i2c_pads_info i2c_pad_info2 = {
+	.scl = {
+		.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
+		.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
+		.gp = IMX_GPIO_NR(1, 3)
+	},
+	.sda = {
+		.i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
+		.gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
+		.gp = IMX_GPIO_NR(3, 18)
+	}
+};
+
+void reset_max7310(void)
+{
+	gpio_direction_output(I2C_EXP_RST, 1);
+	imx_iomux_v3_setup_multiple_pads(port_exp,
+					 ARRAY_SIZE(port_exp));
+}
+
+int setup_max7310(void)
+{
+#ifdef CONFIG_SYS_I2C_MXC
+	/*
+	 * set steering config to i2c,
+	 * note: this causes pin conflicts with eimnor and spinor
+	 */
+	gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
+	imx_iomux_v3_setup_multiple_pads(i2c3_pads,
+					ARRAY_SIZE(i2c3_pads));
+
+	/*setup i2c info 2*/
+	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+
+	gpio_exp_setup_port(1, 2, 0x30);
+	gpio_exp_setup_port(2, 2, 0x32);
+	gpio_exp_setup_port(3, 2, 0x34);
+
+	return 0;
+#else
+	return -EPERM;
+#endif
+}
+#endif
+
+#ifdef CONFIG_MXC_SPI
+iomux_v3_cfg_t const ecspi1_pads[] = {
+	MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX6_PAD_EIM_D19__GPIO3_IO19  | MUX_PAD_CTRL(NO_PAD_CTRL),
+	/* Steer logic */
+	MX6_PAD_EIM_A24__GPIO5_IO04  | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+void setup_spinor(void)
+{
+	imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
+					 ARRAY_SIZE(ecspi1_pads));
+	gpio_direction_output(IMX_GPIO_NR(5, 4), 0);
+	gpio_direction_output(IMX_GPIO_NR(3, 19), 0);
+}
+
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+	return (bus == 0 && cs == 1) ? (IMX_GPIO_NR(3, 19)) : -1;
+}
+#endif
+
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
-#ifdef CONFIG_VIDEO_IPUV3
-	setup_display();
-#endif
 
-#ifdef CONFIG_NAND_MXS
-	setup_gpmi_nand();
+#ifdef CONFIG_MAX7310_IOEXP
+	/*Reset gpio expander at early stage*/
+	reset_max7310();
 #endif
 
 	return 0;
@@ -470,43 +649,72 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-	/* I2C 2 and 3 setup - I2C 3 hw mux with EIM */
+#ifdef CONFIG_MAX7310_IOEXP
+	setup_max7310();
+#endif
 	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-	/* I2C 3 Steer */
-	gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
-	imx_iomux_v3_setup_multiple_pads(i2c3_pads, ARRAY_SIZE(i2c3_pads));
-#ifndef CONFIG_SYS_FLASH_CFI
-	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+
+#ifdef CONFIG_VIDEO_IPUV3
+	setup_display();
+#endif
+
+#ifdef CONFIG_MXC_SPI
+	setup_spinor();
+#endif
+
+#ifdef CONFIG_NAND_MXS
+	setup_gpmi_nand();
 #endif
-	gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
-	imx_iomux_v3_setup_multiple_pads(port_exp, ARRAY_SIZE(port_exp));
 
+#ifdef CONFIG_CMD_SATA
+	setup_sata();
+#endif
+
+#ifdef CONFIG_SYS_USE_EIMNOR
 	setup_iomux_eimnor();
+#endif
 	return 0;
 }
 
-#ifdef CONFIG_MXC_SPI
-int board_spi_cs_gpio(unsigned bus, unsigned cs)
+static struct pmic *pfuze;
+int power_init_board(void)
 {
-	return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1;
+	pfuze = pfuze_common_init(I2C_PMIC);
+	if (!pfuze)
+		return -ENODEV;
+
+	return pfuze_mode_init(pfuze, APS_PFM);
 }
-#endif
 
-int power_init_board(void)
+#ifdef CONFIG_LDO_BYPASS_CHECK
+void ldo_mode_set(int ldo_bypass)
 {
-	struct pmic *p;
-	unsigned int ret;
-
-	p = pfuze_common_init(I2C_PMIC);
-	if (!p)
-		return -ENODEV;
+	unsigned int value;
+	struct pmic *p = pfuze;
 
-	ret = pfuze_mode_init(p, APS_PFM);
-	if (ret < 0)
-		return ret;
+	if (!p) {
+		printf("No PMIC found!\n");
+		return;
+	}
 
-	return 0;
+	/* increase VDDARM/VDDSOC to support 1.2G chip */
+	if (check_1_2G()) {
+		ldo_bypass = 0;	/* ldo_enable on 1.2G chip */
+		printf("1.2G chip, increase VDDARM_IN/VDDSOC_IN\n");
+		/* increase VDDARM to 1.425V */
+		pmic_reg_read(p, PFUZE100_SW1ABVOL, &value);
+		value &= ~0x3f;
+		value |= 0x2d;
+		pmic_reg_write(p, PFUZE100_SW1ABVOL, value);
+
+		/* increase VDDSOC to 1.425V */
+		pmic_reg_read(p, PFUZE100_SW1CVOL, &value);
+		value &= ~0x3f;
+		value |= 0x2d;
+		pmic_reg_write(p, PFUZE100_SW1CVOL, value);
+	}
 }
+#endif
 
 #ifdef CONFIG_CMD_BMODE
 static const struct boot_mode board_boot_modes[] = {
@@ -522,6 +730,10 @@ int board_late_init(void)
 	add_board_boot_modes(board_boot_modes);
 #endif
 
+#ifdef CONFIG_ENV_IS_IN_MMC
+	board_late_mmc_env_init();
+#endif
+
 	return 0;
 }
 
@@ -546,8 +758,8 @@ int checkboard(void)
 }
 
 #ifdef CONFIG_USB_EHCI_MX6
-#define USB_HOST1_PWR     PORTEXP_IO_NR(0x32, 7)
-#define USB_OTG_PWR       PORTEXP_IO_NR(0x34, 1)
+#define USB_HOST1_PWR     IOEXP_GPIO_NR(2, 7)
+#define USB_OTG_PWR       IOEXP_GPIO_NR(3, 1)
 
 iomux_v3_cfg_t const usb_otg_pads[] = {
 	MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
@@ -580,15 +792,15 @@ int board_ehci_power(int port, int on)
 	switch (port) {
 	case 0:
 		if (on)
-			port_exp_direction_output(USB_OTG_PWR, 1);
+			gpio_exp_direction_output(USB_OTG_PWR, 1);
 		else
-			port_exp_direction_output(USB_OTG_PWR, 0);
+			gpio_exp_direction_output(USB_OTG_PWR, 0);
 		break;
 	case 1:
 		if (on)
-			port_exp_direction_output(USB_HOST1_PWR, 1);
+			gpio_exp_direction_output(USB_HOST1_PWR, 1);
 		else
-			port_exp_direction_output(USB_HOST1_PWR, 0);
+			gpio_exp_direction_output(USB_HOST1_PWR, 0);
 		break;
 	default:
 		printf("MXC USB port %d not yet supported\n", port);
diff --git a/board/freescale/mx6qsabreauto/mx6solo.cfg b/board/freescale/mx6qsabreauto/mx6solo.cfg
new file mode 100644
index 0000000..011042b
--- /dev/null
+++ b/board/freescale/mx6qsabreauto/mx6solo.cfg
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of spi, sd, eimnor, nand, sata:
+ * spinor: flash_offset: 0x0400
+ * nand:   flash_offset: 0x0400
+ * sata:   flash_offset: 0x0400
+ * sd/mmc: flash_offset: 0x0400
+ * eimnor: flash_offset: 0x1000
+ */
+
+#if defined(CONFIG_SYS_BOOT_EIMNOR)
+BOOT_FROM	nor
+#else /* others has the same flash_offset as sd */
+BOOT_FROM	sd
+#endif
+
+#ifdef CONFIG_USE_PLUGIN
+/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
+PLUGIN	board/freescale/mx6qsabreauto/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_SECURE_BOOT
+CSF 0x2000
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+DATA 4, 0x020e0774, 0x000C0000
+DATA 4, 0x020e0754, 0x00000000
+DATA 4, 0x020e04ac, 0x00000030
+DATA 4, 0x020e04b0, 0x00000030
+DATA 4, 0x020e0464, 0x00000030
+DATA 4, 0x020e0490, 0x00000030
+DATA 4, 0x020e074c, 0x00000030
+DATA 4, 0x020e0494, 0x00000030
+DATA 4, 0x020e04a0, 0x00000000
+DATA 4, 0x020e04b4, 0x00000030
+DATA 4, 0x020e04b8, 0x00000030
+DATA 4, 0x020e076c, 0x00000030
+DATA 4, 0x020e0750, 0x00020000
+DATA 4, 0x020e04bc, 0x00000028
+DATA 4, 0x020e04c0, 0x00000028
+DATA 4, 0x020e04c4, 0x00000028
+DATA 4, 0x020e04c8, 0x00000028
+DATA 4, 0x020e0760, 0x00020000
+DATA 4, 0x020e0764, 0x00000028
+DATA 4, 0x020e0770, 0x00000028
+DATA 4, 0x020e0778, 0x00000028
+DATA 4, 0x020e077c, 0x00000028
+DATA 4, 0x020e0470, 0x00000028
+DATA 4, 0x020e0474, 0x00000028
+DATA 4, 0x020e0478, 0x00000028
+DATA 4, 0x020e047c, 0x00000028
+DATA 4, 0x021b0800, 0xa1390003
+DATA 4, 0x021b080c, 0x001F001F
+DATA 4, 0x021b0810, 0x001F001F
+DATA 4, 0x021b083c, 0x421C0216
+DATA 4, 0x021b0840, 0x017B017A
+DATA 4, 0x021b0848, 0x4B4A4E4C
+DATA 4, 0x021b0850, 0x3F3F3334
+DATA 4, 0x021b081c, 0x33333333
+DATA 4, 0x021b0820, 0x33333333
+DATA 4, 0x021b0824, 0x33333333
+DATA 4, 0x021b0828, 0x33333333
+DATA 4, 0x021b08b8, 0x00000800
+DATA 4, 0x021b0004, 0x00020025
+DATA 4, 0x021b0008, 0x00333030
+DATA 4, 0x021b000c, 0x676B5313
+DATA 4, 0x021b0010, 0xB66E8B63
+DATA 4, 0x021b0014, 0x01FF00DB
+DATA 4, 0x021b0018, 0x00001740
+DATA 4, 0x021b001c, 0x00008000
+DATA 4, 0x021b002c, 0x000026d2
+DATA 4, 0x021b0030, 0x006B1023
+DATA 4, 0x021b0040, 0x00000027
+DATA 4, 0x021b0000, 0x84190000
+DATA 4, 0x021b001c, 0x04008032
+DATA 4, 0x021b001c, 0x00008033
+DATA 4, 0x021b001c, 0x00048031
+DATA 4, 0x021b001c, 0x05208030
+DATA 4, 0x021b001c, 0x04008040
+DATA 4, 0x021b0020, 0x00005800
+DATA 4, 0x021b0818, 0x00011117
+DATA 4, 0x021b0004, 0x00025565
+DATA 4, 0x021b0404, 0x00011006
+DATA 4, 0x021b001c, 0x00000000
+
+/* set the default clock gate to save power */
+DATA 4, 0x020c4068, 0x00C03F3F
+DATA 4, 0x020c406c, 0x0030FC03
+DATA 4, 0x020c4070, 0x0FFFC000
+DATA 4, 0x020c4074, 0x3FF00000
+DATA 4, 0x020c4078, 0xFFFFF300
+DATA 4, 0x020c407c, 0x0F0000C3
+DATA 4, 0x020c4080, 0x00000FFF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4, 0x020e0010, 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4, 0x020e0018, 0x007F007F
+DATA 4, 0x020e001c, 0x007F007F
+#endif
diff --git a/configs/mx6dlsabreauto_eimnor_defconfig b/configs/mx6dlsabreauto_eimnor_defconfig
new file mode 100644
index 0000000..dec59be
--- /dev/null
+++ b/configs/mx6dlsabreauto_eimnor_defconfig
@@ -0,0 +1,7 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL,SYS_BOOT_EIMNOR"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6dlsabreauto_nand_defconfig b/configs/mx6dlsabreauto_nand_defconfig
new file mode 100644
index 0000000..8854943
--- /dev/null
+++ b/configs/mx6dlsabreauto_nand_defconfig
@@ -0,0 +1,7 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL,SYS_BOOT_NAND"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6dlsabreauto_spinor_defconfig b/configs/mx6dlsabreauto_spinor_defconfig
new file mode 100644
index 0000000..275ddc4
--- /dev/null
+++ b/configs/mx6dlsabreauto_spinor_defconfig
@@ -0,0 +1,7 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL,SYS_BOOT_SPINOR"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6qsabreauto_eimnor_defconfig b/configs/mx6qsabreauto_eimnor_defconfig
new file mode 100644
index 0000000..1e18606
--- /dev/null
+++ b/configs/mx6qsabreauto_eimnor_defconfig
@@ -0,0 +1,7 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q,SYS_BOOT_EIMNOR"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6qsabreauto_nand_defconfig b/configs/mx6qsabreauto_nand_defconfig
new file mode 100644
index 0000000..6a5dc45
--- /dev/null
+++ b/configs/mx6qsabreauto_nand_defconfig
@@ -0,0 +1,7 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q,SYS_BOOT_NAND"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6qsabreauto_sata_defconfig b/configs/mx6qsabreauto_sata_defconfig
new file mode 100644
index 0000000..64b848a
--- /dev/null
+++ b/configs/mx6qsabreauto_sata_defconfig
@@ -0,0 +1,7 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q,SYS_BOOT_SATA"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6qsabreauto_spinor_defconfig b/configs/mx6qsabreauto_spinor_defconfig
new file mode 100644
index 0000000..eee588c
--- /dev/null
+++ b/configs/mx6qsabreauto_spinor_defconfig
@@ -0,0 +1,7 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q,SYS_BOOT_SPINOR"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6solosabreauto_defconfig b/configs/mx6solosabreauto_defconfig
new file mode 100644
index 0000000..d57294e
--- /dev/null
+++ b/configs/mx6solosabreauto_defconfig
@@ -0,0 +1,7 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6solo.cfg,MX6SOLO,SYS_NOSMP="nosmp""
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6solosabreauto_eimnor_defconfig b/configs/mx6solosabreauto_eimnor_defconfig
new file mode 100644
index 0000000..362c718
--- /dev/null
+++ b/configs/mx6solosabreauto_eimnor_defconfig
@@ -0,0 +1,7 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6solo.cfg,MX6SOLO,SYS_NOSMP="nosmp",SYS_BOOT_EIMNOR"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6solosabreauto_nand_defconfig b/configs/mx6solosabreauto_nand_defconfig
new file mode 100644
index 0000000..c1bbef9
--- /dev/null
+++ b/configs/mx6solosabreauto_nand_defconfig
@@ -0,0 +1,7 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6solo.cfg,MX6SOLO,SYS_NOSMP="nosmp",SYS_BOOT_NAND"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6solosabreauto_spinor_defconfig b/configs/mx6solosabreauto_spinor_defconfig
new file mode 100644
index 0000000..a8f321f
--- /dev/null
+++ b/configs/mx6solosabreauto_spinor_defconfig
@@ -0,0 +1,7 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6solo.cfg,MX6SOLO,SYS_NOSMP="nosmp",SYS_BOOT_SPINOR"
+CONFIG_ARM=y
+CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index 51042ca..d0981f2 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012-2015 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6Q SabreAuto board.
  *
@@ -12,14 +12,25 @@
 #define CONFIG_MACH_TYPE	3529
 #define CONFIG_MXC_UART_BASE	UART4_BASE
 #define CONFIG_CONSOLE_DEV		"ttymxc3"
+#define CONFIG_MMCROOT			"/dev/mmcblk2p2"  /* SDHC3 */
 #if defined CONFIG_MX6Q
 #define CONFIG_DEFAULT_FDT_FILE	"imx6q-sabreauto.dtb"
-#elif defined CONFIG_MX6DL
+#define PHYS_SDRAM_SIZE		(2u * 1024 * 1024 * 1024)
+#elif defined(CONFIG_MX6DL)
 #define CONFIG_DEFAULT_FDT_FILE	"imx6dl-sabreauto.dtb"
-#endif
-#define CONFIG_MMCROOT			"/dev/mmcblk0p2"
 #define PHYS_SDRAM_SIZE		(2u * 1024 * 1024 * 1024)
+#elif defined(CONFIG_MX6SOLO)
+#define CONFIG_DEFAULT_FDT_FILE	"imx6dl-sabreauto.dtb"
+#define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
+#endif
+
+#define CONFIG_SYS_USE_NAND
+
+#include "mx6sabre_common.h"
+#include <asm/imx-common/gpio.h>
 
+/*Since the pin conflicts on EIM D18, disable the USB host if the NOR flash is enabled */
+#if !defined(CONFIG_SYS_USE_SPINOR) && !defined(CONFIG_SYS_USE_EIMNOR)
 /* USB Configs */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
@@ -32,11 +43,20 @@
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
 
-#define CONFIG_PCA953X
-#define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x30, 8}, {0x32, 8}, {0x34, 8} }
+/* MAX7310 configs */
+#define CONFIG_MAX7310_IOEXP
+#define CONFIG_IOEXP_DEVICES_NUM 3
+#define CONFIG_IOEXP_DEV_PINS_NUM 8
+#endif
 
-#include "mx6sabre_common.h"
+#undef CONFIG_MFG_NAND_PARTITION
+#ifdef CONFIG_SYS_BOOT_NAND
+#define CONFIG_MFG_NAND_PARTITION "mtdparts=8000000.nor:1m(boot),-(rootfs)\\\\;gpmi-nand:64m(boot),16m(kernel),16m(dtb),-(rootfs) "
+#else
+#define CONFIG_MFG_NAND_PARTITION ""
+#endif
 
+#ifdef CONFIG_SYS_USE_EIMNOR
 #undef CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
 #define CONFIG_SYS_FLASH_SECT_SIZE      (128 * 1024)
@@ -46,12 +66,15 @@
 #define CONFIG_FLASH_CFI_DRIVER         /* Use drivers/cfi_flash.c */
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use buffered writes*/
 #define CONFIG_SYS_FLASH_EMPTY_INFO
+#endif
 
 #define CONFIG_SYS_FSL_USDHC_NUM	2
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#endif
+#define CONFIG_SYS_MMC_ENV_DEV		1  /* SDHC3 */
+#define CONFIG_SYS_MMC_ENV_PART                0       /* user partition */
 
+#ifdef CONFIG_SYS_USE_SPINOR
+#define CONFIG_SF_DEFAULT_CS   (1|(IMX_GPIO_NR(3, 19)<<8))
+#endif
 /* I2C Configs */
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C