summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAneesh V <aneesh@ti.com>2011-11-21 23:39:04 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2011-12-06 23:59:34 +0100
commitf6ddfdd3a92e2906c87c521deae46e509bd0bf3d (patch)
tree5b527e00ff555f243c9c58d2c511c50487acfe7c
parent9404758e9baf0472d6958efaa7df1aa757b237d8 (diff)
downloadu-boot-imx-f6ddfdd3a92e2906c87c521deae46e509bd0bf3d.zip
u-boot-imx-f6ddfdd3a92e2906c87c521deae46e509bd0bf3d.tar.gz
u-boot-imx-f6ddfdd3a92e2906c87c521deae46e509bd0bf3d.tar.bz2
omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses
Change the CONFIG_SYS_TEXT_BASE and the addresses of SDRAM buffers used by SPL(heap and BSS) keeping in mind the following requirements: 1. Make sure that SPL's heap and BSS doesn't come in the way of Linux kernel, which is typically loaded at 0x80008000. This will be important when SPL directly loads kernel. 2. Align the CONFIG_SYS_TEXT_BASE between TI internal U-Boot and mainline U-Boot. This avoids a lot of confusion and allows for the inter-operability of x-loader, SPL, internal U-Boot, mainline U-Boot etc. The internal U-Boot's address can not be changed to that of mainline U-Boot as internal U-Boot doesn't have relocation and 0x80100000 used by mainline U-Boot will clash with kernel 3. Assume only a minimum amount of memory that may be available on any practical OMAP4/5 board in future too. We are assuming a minimum of 128 MB of memory Signed-off-by: Aneesh V <aneesh@ti.com>
-rw-r--r--include/configs/omap4_common.h17
-rw-r--r--include/configs/omap5_evm.h19
2 files changed, 21 insertions, 15 deletions
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 613aef2..a989721 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -255,18 +255,21 @@
#define CONFIG_SPL_MAX_SIZE (38 * 1024)
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
-#define CONFIG_SPL_BSS_START_ADDR 0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
* 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * header. That is 80E7FFC0--0x80E80000 should not be used for any
* other needs.
*/
-#define CONFIG_SYS_TEXT_BASE 0x80100000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
+#define CONFIG_SYS_TEXT_BASE 0x80E80000
+/*
+ * BSS and malloc area 64MB into memory to allow enough
+ * space for the kernel at the beginning of memory
+ */
+#define CONFIG_SPL_BSS_START_ADDR 0x84000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
index b763f01..d3d5263 100644
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_evm.h
@@ -254,9 +254,6 @@
#define CONFIG_SPL_MAX_SIZE 0x1E000 /* 120K */
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
-#define CONFIG_SPL_BSS_START_ADDR 0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
-
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
@@ -272,13 +269,19 @@
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
* 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * header. That is 80E7FFC0--0x80E80000 should not be used for any
* other needs.
*/
-#define CONFIG_SYS_TEXT_BASE 0x80100000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
+#define CONFIG_SYS_TEXT_BASE 0x80E80000
+
+/*
+ * BSS and malloc area 64MB into memory to allow enough
+ * space for the kernel at the beginning of memory
+ */
+#define CONFIG_SPL_BSS_START_ADDR 0x84000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
#endif /* __CONFIG_H */