summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorroy zang <tie-fei.zang@freescale.com>2007-01-22 13:15:35 +0800
committerZang Tiefei <roy@bus.ap.freescale.net>2007-01-22 13:15:35 +0800
commitee460917afb74767aedc3da095d4fec4a50ba6f8 (patch)
treefdead38c4681fc9adbedd6836792660f933614d3
parenta41969e09b9d886091a804c2ba5f1ab84b084dd3 (diff)
parenta4012396645533aef218354eeba754dff0deace8 (diff)
downloadu-boot-imx-ee460917afb74767aedc3da095d4fec4a50ba6f8.zip
u-boot-imx-ee460917afb74767aedc3da095d4fec4a50ba6f8.tar.gz
u-boot-imx-ee460917afb74767aedc3da095d4fec4a50ba6f8.tar.bz2
Merge branch 'master' into hpc2
Conflicts: drivers/cfi_flash.c The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support mpc7448hpc2 board.
-rw-r--r--CHANGELOG395
-rw-r--r--MAINTAINERS2
-rwxr-xr-xMAKEALL11
-rw-r--r--Makefile28
-rw-r--r--board/amcc/sequoia/init.S2
-rw-r--r--board/amcc/sequoia/sdram.c366
-rw-r--r--board/amcc/sequoia/sdram.h505
-rw-r--r--board/amcc/sequoia/sequoia.c22
-rw-r--r--board/amcc/taishan/Makefile51
-rw-r--r--board/amcc/taishan/config.mk44
-rw-r--r--board/amcc/taishan/init.S97
-rw-r--r--board/amcc/taishan/lcd.c380
-rw-r--r--board/amcc/taishan/showinfo.c236
-rw-r--r--board/amcc/taishan/taishan.c331
-rw-r--r--board/amcc/taishan/u-boot.lds157
-rw-r--r--board/amcc/taishan/update.c78
-rw-r--r--board/amcc/yellowstone/yellowstone.c25
-rw-r--r--board/amcc/yosemite/yosemite.c25
-rw-r--r--board/mcc200/auto_update.c8
-rw-r--r--board/mcc200/mcc200.c11
-rw-r--r--board/prodrive/alpr/alpr.c27
-rw-r--r--board/prodrive/alpr/nand.c4
-rw-r--r--board/prodrive/p3mx/p3mx.c63
-rw-r--r--board/prodrive/p3mx/sdram_init.c4
-rw-r--r--board/prodrive/pdnb3/flash.c4
-rw-r--r--board/sc3/Makefile47
-rw-r--r--board/sc3/config.mk24
-rw-r--r--board/sc3/init.S382
-rw-r--r--board/sc3/sc3.c781
-rw-r--r--board/sc3/sc3.h117
-rw-r--r--board/sc3/sc3nand.c94
-rw-r--r--board/sc3/u-boot.lds150
-rw-r--r--board/spc1920/Makefile2
-rw-r--r--board/spc1920/hpi.c603
-rw-r--r--board/spc1920/hpi.h28
-rw-r--r--board/spc1920/pld.h2
-rw-r--r--board/spc1920/spc1920.c38
-rw-r--r--board/tqm5200/cam5200_flash.c4
-rw-r--r--board/uc101/Makefile50
-rw-r--r--board/uc101/config.mk41
-rw-r--r--board/uc101/u-boot.lds136
-rw-r--r--board/uc101/uc101.c371
-rw-r--r--board/v38b/v38b.c21
-rw-r--r--common/cmd_boot.c2
-rw-r--r--cpu/mpc5xxx/cpu_init.c2
-rw-r--r--cpu/mpc5xxx/fec.c7
-rw-r--r--cpu/mpc8xx/serial.c13
-rw-r--r--cpu/ppc4xx/405gp_pci.c2
-rw-r--r--cpu/ppc4xx/440spe_pcie.c8
-rw-r--r--cpu/ppc4xx/4xx_enet.c139
-rw-r--r--cpu/ppc4xx/cpu.c30
-rw-r--r--cpu/ppc4xx/cpu_init.c13
-rw-r--r--cpu/ppc4xx/sdram.c35
-rw-r--r--drivers/cfi_flash.c41
-rw-r--r--drivers/nand/nand_base.c2
-rw-r--r--dtt/Makefile2
-rw-r--r--dtt/lm81.c148
-rw-r--r--include/asm-ppc/processor.h13
-rw-r--r--include/configs/TQM5200.h34
-rw-r--r--include/configs/alpr.h19
-rw-r--r--include/configs/p3mx.h5
-rw-r--r--include/configs/pdnb3.h37
-rw-r--r--include/configs/sc3.h585
-rw-r--r--include/configs/sequoia.h5
-rw-r--r--include/configs/spc1920.h102
-rw-r--r--include/configs/taishan.h333
-rw-r--r--include/configs/uc101.h353
-rw-r--r--include/configs/v38b.h7
-rw-r--r--include/configs/yellowstone.h14
-rw-r--r--include/configs/yosemite.h14
-rw-r--r--include/dtt.h9
-rw-r--r--include/ppc405.h1
-rw-r--r--include/ppc440.h20
-rw-r--r--lib_ppc/board.c16
-rw-r--r--nand_spl/board/amcc/sequoia/Makefile2
-rw-r--r--rtc/Makefile2
-rw-r--r--rtc/ds3231.c193
77 files changed, 7685 insertions, 290 deletions
diff --git a/CHANGELOG b/CHANGELOG
index e0b9be9..3bfd48d 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,394 @@
+commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jan 19 19:57:10 2007 +0100
+
+ [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jan 19 18:05:26 2007 +0100
+
+ [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
+ if you must swap the bytes between reading/writing.
+ (Needed for the SC3 board)
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 18 16:05:47 2007 +0100
+
+ [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 18 11:54:52 2007 +0100
+
+ [PATCH] Update Prodrive P3Mx support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 34167a36c29ee946b727465db5c014746a08e978
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 18 11:48:10 2007 +0100
+
+ [PATCH] Add missing Taishan config file
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Jan 18 11:28:51 2007 +0100
+
+ [PATCH] Fix: Compilerwarnings for SC3 board.
+ The EBC Configuration Register is now by CFG_EBC_CFG definable
+ Added JFFS2 support for the SC3 board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 18 10:25:34 2007 +0100
+
+ [PATCH] Add support for AMCC Taishan PPC440GX eval board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Jan 16 18:30:50 2007 +0100
+
+ Raname solidcard3 into sc3; add redundant env for sc3
+
+commit 1bbbbdd20fcec9933697000dcf55ff7972622596
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Jan 16 12:46:35 2007 +0100
+
+ Update default environment for Solidcard3
+
+commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jan 15 09:46:29 2007 +0100
+
+ [PATCH] Fix 440SPe rev B detection from previous patch
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a443d31410c571ee8f970da819a44d698fdd6b1f
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Sun Jan 14 13:35:31 2007 +0100
+
+ [FIX] correct I2C Writes for the LM81 Sensor.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0bba5452835f19a61204edcda3a58112fd8e2208
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Jan 13 11:17:10 2007 +0100
+
+ Undo commit 3033ebb2: reset command does not take any arguments
+
+ Haiying Wang's modification to the reset command was broken, undo it.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 95981778cff0038fd9941044d6a3eda810e33258
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 08:01:03 2007 +0100
+
+ [PATCH] Update 440SP(e) cpu revisions
+
+ Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 07:59:56 2007 +0100
+
+ [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
+
+ Now the board revision and the current PCI bus speed are printed after
+ the board message.
+
+ Also the EBC initialising is now done via defines in the board config
+ file.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 36adff362c2c0141ff8a810d42a7e478f779130f
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 07:59:19 2007 +0100
+
+ [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
+
+ Now the board revision and the current PCI bus speed are printed after
+ the board message.
+
+ Also the EBC initialising is now done via defines in the board config
+ file.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 07:57:51 2007 +0100
+
+ [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
+
+ Now the board revision and the current PCI bus speed are printed after
+ the board message.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ca43ba18e910206ef8063e4b22d282630bff3fd2
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Jan 11 15:44:44 2007 +0100
+
+ Added support for the SOLIDCARD III board from Eurodesign
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
+Author: Reinhard Thies <Reinhard.Thies@web.de>
+Date: Wed Jan 10 14:41:14 2007 +0100
+
+ Adjusted default environment for cam5200 board.
+
+commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jan 10 15:35:52 2007 +0100
+
+ Update CHANGELOG
+
+commit 787fa15860a57833e50bd30555079a9cd4e519b8
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jan 10 01:28:39 2007 +0100
+
+ Fix auto_update for MCC200 board.
+
+ The invocation of do_auto_update() is moved to the end of the
+ misc_init_r() function, after the flash mappings have been
+ initialized. Please find attached a patch that implements that
+ change.
+
+ Also correct the decoding of the keypad status. With this update, the
+ key that will trigger the update is Column 2, Row 2.
+
+commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Jan 10 00:26:15 2007 +0100
+
+ CAM5200 flash driver modifications:
+ - use CFI driver (replaces custom flash driver) for main 'cam5200' target
+ - add second build target 'cam5200_niosflash' which still uses custom driver
+
+commit 67fea022fa957f59653b5238c7496f80a6b70432
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 16:02:48 2007 +0100
+
+ SPC1920: cleanup memory contoller setup
+
+commit 8fc2102faa23593c80381437c09f7745a14deb40
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:14 2007 +0100
+
+ Fix the cpu speed setup to work with all boards.
+
+commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:13 2007 +0100
+
+ SPC1920: add support for the FM18L08 Ramtron FRAM
+
+commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:13 2007 +0100
+
+ SPC1920: update the HPI register addresses to work with the second
+ generation of hardware
+
+commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:13 2007 +0100
+
+ Miscellanious spc1920 related cleanups
+
+commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:12 2007 +0100
+
+ SPC1920 GO/NOGO led should be set to color red in U-Boot
+
+commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:12 2007 +0100
+
+ Add support for the DS3231 RTC
+
+commit 8139567b60d678584b05f0718a681f2047c5e14f
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:11 2007 +0100
+
+ SMC1 uses external CLK4 instead of BRG on spc1920
+
+commit d8d9de1a02fbd880b613d607143d1f57342affc7
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:10 2007 +0100
+
+ Update the SPC1920 CMB PLD driver
+
+commit 3f34f869162750e5e999fd140f884f5de952bcfe
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:10 2007 +0100
+
+ Add / enable I2C support on the spc1920 board
+
+commit d28707dbce1e9ac2017ad051da4133bf22b4204f
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:10 2007 +0100
+
+ Add support for the tms320671x host port interface (HPI)
+
+commit f4eb54529bb3664c3a562e488b460fe075f79d67
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Jan 7 00:13:11 2007 +0100
+
+ Prepare for release 1.2.0
+
+commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 6 15:58:09 2007 +0100
+
+ [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
+
+ This patch fixes a problem with an incorrect setup for the refresh
+ timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f16c1da9577f06c5fc08651a4065537407de4635
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 6 15:56:13 2007 +0100
+
+ [PATCH] Update ALPR board files
+
+ This update brings the ALPR board support to the newest version.
+ It also fixes a problem with the NAND driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cd1d937f90250a32988c37b2b4af8364d25de8ed
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 11:46:05 2007 +0100
+
+ [PATCH] nand: Fix problem with oobsize calculation
+
+ Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
+
+ The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
+ returns a 0x15. In the code fragment below bits [1:0] determine the
+ page size, it is ANDed via "(extid & 0x3)" then shifted out. The
+ next field is also ANDed with 0x3. However this is a one bit field
+ as defined in the Hynix and Samsung parts in the 4th ID byte that
+ determins the oobsize, not a two bit field. It works on Samsung as
+ bits[3:2] are 01. However for the Hynix there is a 11 in these two
+ bits, so the oob size gets messed up.
+
+ I checked the correct linux code and the suggested fix from Brian is
+ also available in the linux nand mtd driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 10:40:36 2007 +0100
+
+ [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
+
+ This fix will make the MAL burst disabling patch for the Linux
+ EMAC driver obsolete.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 023889838282b6237b401664f22dd22dfba2c066
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 10:38:05 2007 +0100
+
+ [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
+
+ This code will optimize the DDR2 controller setup on a board specific
+ basis.
+
+ Note: This code doesn't work right now on the NAND booting image for the
+ Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cce4acbb68398634b8d011ed7bb0d12269c84230
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Dec 28 19:08:21 2006 +0100
+
+ Few V38B changes:
+ - fix a typo in V38B config file
+ - move watchdog initialisation earlier in the boot process
+ - add "wdt=off" to default kernel command line (disables kernel watchdog)
+
+commit 92eb729bad876725aeea908d2addba0800620840
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Dec 27 01:26:13 2006 +0100
+
+ Fix bug in adaption of Stefano Babic's CFI driver patch.
+
+commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Dec 24 01:42:57 2006 +0100
+
+ Minor code cleanup.
+
+commit d784fdb05900ada3686d5778783e1fb328e9fb66
+Author: Stefano Babic <sbabic@denx.de>
+Date: Tue Dec 12 00:22:42 2006 +0100
+
+ Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
+
+commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 22 14:29:40 2006 +0100
+
+ [PATCH] Fix sequoia flash autodetection (finally correct)
+
+ Now 32MByte and 64MByte FLASH is know to work and other
+ configurations should work too.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 82e5236a8b719543643fd26d5827938ab2b94818
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Fri Dec 22 10:30:26 2006 +0100
+
+ Minor code cleanup; update CHANGELOG.
+
+commit fa23044564091f05d9695beb7b5b9a931e7f41a4
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Dec 21 17:17:02 2006 +0100
+
+ Added support for the TQM8272 board from TQ
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Dec 21 16:14:48 2006 +0100
+
+ [PATCH] Add support for the UC101 board from MAN.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
commit c84bad0ef60e7055ab0bd49b93069509cecc382a
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Wed Dec 20 00:29:43 2006 +0100
@@ -210,7 +601,7 @@ Date: Mon Nov 27 17:04:06 2006 +0100
[PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
- arguments to bootm. It removes the getenv("disable_of") test that used
+ arguments to bootm. It removes the getenv("disable_of") test that used
to be used for this purpose.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
@@ -908,7 +1299,7 @@ Date: Tue Oct 24 23:47:37 2006 -0500
If a Multi-Image file contains a third image we try to use it as a
device tree. The device tree image is assumed to be uncompressed in the
- image file. We automatically allocate space for the device tree in memory
+ image file. We automatically allocate space for the device tree in memory
and provide an 8k pad to allow more than a reasonable amount of growth.
Additionally, a device tree that was contained in flash will now automatically
diff --git a/MAINTAINERS b/MAINTAINERS
index ce20def..e9203eb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -292,6 +292,7 @@ Stefan Roese <sr@denx.de>
pcs440ep PPC440EP
sequoia PPC440EPx
sycamore PPC405GPr
+ taishan PPC440GX
walnut PPC405GP
yellowstone PPC440GR
yosemite PPC440EP
@@ -464,6 +465,7 @@ Stefan Roese <sr@denx.de>
ixdpg425 xscale
pdnb3 xscale
+ scpu xscale
Robert Schwebel <r.schwebel@pengutronix.de>
diff --git a/MAKEALL b/MAKEALL
index a4a5fac..e0edcf9 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -85,10 +85,11 @@ LIST_4xx=" \
MIP405 MIP405T ML2 ml300 \
ocotea OCRTC ORSG p3p440 \
PCI405 pcs440ep PIP405 PLU405 \
- PMC405 PPChameleonEVB sbc405 sequoia \
- sequoia_nand VOH405 VOM405 W7OLMC \
- W7OLMG walnut WUH405 XPEDITE1K \
- yellowstone yosemite yucca \
+ PMC405 PPChameleonEVB sbc405 sc3 \
+ sequoia sequoia_nand taishan VOH405 \
+ VOM405 W7OLMC W7OLMG walnut \
+ WUH405 XPEDITE1K yellowstone yosemite \
+ yucca \
"
#########################################################################
@@ -225,7 +226,7 @@ LIST_pxa=" \
xsengine zylonite \
"
-LIST_ixp="ixdp425 ixdpg425 pdnb3"
+LIST_ixp="ixdp425 ixdpg425 pdnb3 scpu"
LIST_arm=" \
diff --git a/Makefile b/Makefile
index 0928b3a..7924e80 100644
--- a/Makefile
+++ b/Makefile
@@ -22,8 +22,8 @@
#
VERSION = 1
-PATCHLEVEL = 1
-SUBLEVEL = 6
+PATCHLEVEL = 2
+SUBLEVEL = 0
EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
@@ -557,6 +557,7 @@ Total5200_Rev2_lowboot_config: unconfig
@$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
cam5200_config \
+cam5200_niosflash_config \
fo300_config \
MiniFAP_config \
TQM5200S_config \
@@ -574,6 +575,10 @@ TQM5200_STK100_config: unconfig
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
echo "... TQM5200S on Cam5200" ; \
}
+ @[ -z "$(findstring niosflash,$@)" ] || \
+ { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \
+ echo "... with NIOS flash driver" ; \
+ }
@[ -z "$(findstring fo300,$@)" ] || \
{ echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \
echo "... TQM5200 on FO300" ; \
@@ -597,6 +602,8 @@ TQM5200_STK100_config: unconfig
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
+uc101_config: unconfig
+ @$(MKCONFIG) uc101 ppc mpc5xxx uc101
#########################################################################
## MPC8xx Systems
@@ -1193,10 +1200,16 @@ sequoia_nand_config: unconfig
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+sc3_config:unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx sc3
+
sycamore_config: unconfig
@echo "Configuring for sycamore board as subset of walnut..."
@$(MKCONFIG) -a walnut ppc ppc4xx walnut amcc
+taishan_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
+
VOH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
@@ -2056,8 +2069,15 @@ pleb2_config : unconfig
logodl_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa logodl
-pdnb3_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm ixp pdnb3 prodrive
+pdnb3_config \
+scpu_config: unconfig
+ @if [ "$(findstring scpu_,$@)" ] ; then \
+ echo "#define CONFIG_SCPU" >>include/config.h ; \
+ echo "... on SCPU board variant" ; \
+ else \
+ >include/config.h ; \
+ fi
+ @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
pxa255_idp_config: unconfig
@$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
index 3d4ac85..45bcd4b 100644
--- a/board/amcc/sequoia/init.S
+++ b/board/amcc/sequoia/init.S
@@ -90,7 +90,7 @@ tlbtab:
/*
* BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
* speed up boot process. It is patched after relocation to enable SA_I
- */
+ */
#ifndef CONFIG_NAND_SPL
tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
#else
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
index 53f728d..77f1438 100644
--- a/board/amcc/sequoia/sdram.c
+++ b/board/amcc/sequoia/sdram.c
@@ -1,5 +1,12 @@
/*
* (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or
@@ -18,10 +25,352 @@
* MA 02111-1307 USA
*/
+/* define DEBUG for debug output */
+#undef DEBUG
+
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <ppc440.h>
+#include "sdram.h"
+
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
+ defined(CONFIG_DDR_DATA_EYE)
+/*-----------------------------------------------------------------------------+
+ * wait_for_dlllock.
+ +----------------------------------------------------------------------------*/
+static int wait_for_dlllock(void)
+{
+ unsigned long val;
+ int wait = 0;
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_17);
+ val = DDR0_17_DLLLOCKREG_UNLOCKED;
+
+ while (wait != 0xffff) {
+ val = mfdcr(ddrcfgd);
+ if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
+ /* dlllockreg bit on */
+ return 0;
+ else
+ wait++;
+ }
+ debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+ debug("Waiting for dlllockreg bit to raise\n");
+
+ return -1;
+}
+#endif
+
+#if defined(CONFIG_DDR_DATA_EYE)
+/*-----------------------------------------------------------------------------+
+ * wait_for_dram_init_complete.
+ +----------------------------------------------------------------------------*/
+int wait_for_dram_init_complete(void)
+{
+ unsigned long val;
+ int wait = 0;
+
+ /* --------------------------------------------------------------+
+ * Wait for 'DRAM initialization complete' bit in status register
+ * -------------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_00);
+
+ while (wait != 0xffff) {
+ val = mfdcr(ddrcfgd);
+ if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
+ /* 'DRAM initialization complete' bit */
+ return 0;
+ else
+ wait++;
+ }
+
+ debug("DRAM initialization complete bit in status register did not rise\n");
+
+ return -1;
+}
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+/*-----------------------------------------------------------------------------+
+ * denali_core_search_data_eye.
+ +----------------------------------------------------------------------------*/
+void denali_core_search_data_eye(unsigned long memory_size)
+{
+ int k, j;
+ u32 val;
+ u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
+ u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
+ u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
+ u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
+ volatile u32 *ram_pointer;
+ u32 test[NUM_TRIES] = {
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+ ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
+
+ for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
+ /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'wr_dqs_shift'
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+ | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ * ----------------------------------------------------------*/
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+ | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+
+ passing_cases = 0;
+
+ for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
+ /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
+ /* -----------------------------------------------------------+
+ * Set 'dll_dqs_delay_X'.
+ * ----------------------------------------------------------*/
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /* -----------------------------------------------------------+
+ * Assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ if (wait_for_dlllock() != 0) {
+ printf("dlllock did not occur !!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+ wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ ppcMsync();
+ ppcMbar();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur !!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+ wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+
+ /* write values */
+ for (j=0; j<NUM_TRIES; j++) {
+ ram_pointer[j] = test[j];
+
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+ }
+
+ /* read values back */
+ for (j=0; j<NUM_TRIES; j++) {
+ for (k=0; k<NUM_READS; k++) {
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+ if (ram_pointer[j] != test[j])
+ break;
+ }
+
+ /* read error */
+ if (k != NUM_READS)
+ break;
+ }
+
+ /* See if the dll_dqs_delay_X value passed.*/
+ if (j < NUM_TRIES) {
+ /* Failed */
+ passing_cases = 0;
+ /* break; */
+ } else {
+ /* Passed */
+ if (passing_cases == 0)
+ dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
+ passing_cases++;
+ if (passing_cases >= max_passing_cases) {
+ max_passing_cases = passing_cases;
+ wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
+ dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
+ dll_dqs_delay_X_end_window = dll_dqs_delay_X;
+ }
+ }
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
+
+ } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
+
+ /* -----------------------------------------------------------+
+ * Largest passing window is now detected.
+ * ----------------------------------------------------------*/
+
+ /* Compute dll_dqs_delay_X value */
+ dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
+ wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
+
+ debug("DQS calibration - Window detected:\n");
+ debug("max_passing_cases = %d\n", max_passing_cases);
+ debug("wr_dqs_shift = %d\n", wr_dqs_shift);
+ debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
+ debug("dll_dqs_delay_X window = %d - %d\n",
+ dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'wr_dqs_shift'
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+ | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_09=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ * ----------------------------------------------------------*/
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+ | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_22=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dll_dqs_delay_X'.
+ * ----------------------------------------------------------*/
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_17=0x%08lx\n", val);
+
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_18=0x%08lx\n", val);
+
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_19=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ ppcMsync();
+ ppcMbar();
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ if (wait_for_dlllock() != 0) {
+ printf("dlllock did not occur !!!\n");
+ hang();
+ }
+ ppcMsync();
+ ppcMbar();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur !!!\n");
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+}
+#endif /* CONFIG_DDR_DATA_EYE */
+
/*************************************************************************
*
* initdram -- 440EPx's DDR controller is a DENALI Core
@@ -30,8 +379,6 @@
long int initdram (int board_type)
{
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
- volatile ulong val;
-
mtsdram(DDR0_02, 0x00000000);
mtsdram(DDR0_00, 0x0000190A);
@@ -64,14 +411,15 @@ long int initdram (int board_type)
mtsdram(DDR0_44, 0x00000005);
mtsdram(DDR0_02, 0x00000001);
- /*
- * Wait for DCC master delay line to finish calibration
- */
- mfsdram(DDR0_17, val);
- while (((val >> 8) & 0x000007f) == 0) {
- mfsdram(DDR0_17, val);
- }
+ wait_for_dlllock();
#endif /* #ifndef CONFIG_NAND_U_BOOT */
+#ifdef CONFIG_DDR_DATA_EYE
+ /* -----------------------------------------------------------+
+ * Perform data eye search if requested.
+ * ----------------------------------------------------------*/
+ denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20);
+#endif
+
return (CFG_MBYTES_SDRAM << 20);
}
diff --git a/board/amcc/sequoia/sdram.h b/board/amcc/sequoia/sdram.h
new file mode 100644
index 0000000..7f847aa
--- /dev/null
+++ b/board/amcc/sequoia/sdram.h
@@ -0,0 +1,505 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SPD_SDRAM_DENALI_H_
+#define _SPD_SDRAM_DENALI_H_
+
+#define ppcMsync sync
+#define ppcMbar eieio
+
+/* General definitions */
+#define MAX_SPD_BYTE 128 /* highest SPD byte # to read */
+#define DENALI_REG_NUMBER 45 /* 45 Regs in PPC440EPx Denali Core */
+#define SUPPORTED_DIMMS_NB 7 /* Number of supported DIMM modules types */
+#define SDRAM_NONE 0 /* No DIMM detected in Slot */
+#define MAXRANKS 2 /* 2 ranks maximum */
+
+/* Supported PLB Frequencies */
+#define PLB_FREQ_133MHZ 133333333
+#define PLB_FREQ_152MHZ 152000000
+#define PLB_FREQ_160MHZ 160000000
+#define PLB_FREQ_166MHZ 166666666
+
+/* Denali Core Registers */
+#define SDRAM_DCR_BASE 0x10
+
+#define DDR_DCR_BASE 0x10
+#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
+#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
+
+/*-----------------------------------------------------------------------------+
+ | Values for ddrcfga register - indirect addressing of these regs
+ +-----------------------------------------------------------------------------*/
+
+#define DDR0_00 0x00
+#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */
+#define DDR0_00_INT_ACK_ALL 0x7F000000
+#define DDR0_00_INT_ACK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_00_INT_ACK_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+/* Status */
+#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */
+/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT0 0x00010000
+/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
+#define DDR0_00_INT_STATUS_BIT1 0x00020000
+/* Bit2. Single correctable ECC event detected */
+#define DDR0_00_INT_STATUS_BIT2 0x00040000
+/* Bit3. Multiple correctable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT3 0x00080000
+/* Bit4. Single uncorrectable ECC event detected. */
+#define DDR0_00_INT_STATUS_BIT4 0x00100000
+/* Bit5. Multiple uncorrectable ECC events detected. */
+#define DDR0_00_INT_STATUS_BIT5 0x00200000
+/* Bit6. DRAM initialization complete. */
+#define DDR0_00_INT_STATUS_BIT6 0x00400000
+/* Bit7. Logical OR of all lower bits. */
+#define DDR0_00_INT_STATUS_BIT7 0x00800000
+
+#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00
+#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_00_DLL_START_POINT_MASK 0x0000007F
+#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_01 0x01
+#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000
+#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000
+#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */
+#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_01_INT_MASK_MASK 0x000000FF
+#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
+#define DDR0_01_INT_MASK_ALL_ON 0x000000FF
+#define DDR0_01_INT_MASK_ALL_OFF 0x00000000
+
+#define DDR0_02 0x02
+#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */
+#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24)
+#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2)
+#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */
+#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */
+#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_02_START_MASK 0x00000001
+#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+#define DDR0_02_START_OFF 0x00000000
+#define DDR0_02_START_ON 0x00000001
+
+#define DDR0_03 0x03
+#define DDR0_03_BSTLEN_MASK 0x07000000
+#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_03_CASLAT_MASK 0x00070000
+#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_03_CASLAT_LIN_MASK 0x00000F00
+#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_03_INITAREF_MASK 0x0000000F
+#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_04 0x04
+#define DDR0_04_TRC_MASK 0x1F000000
+#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_04_TRRD_MASK 0x00070000
+#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_04_TRTP_MASK 0x00000700
+#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
+
+#define DDR0_05 0x05
+#define DDR0_05_TMRD_MASK 0x1F000000
+#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_05_TEMRS_MASK 0x00070000
+#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_05_TRP_MASK 0x00000F00
+#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
+#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
+#define DDR0_05_TRAS_MIN_MASK 0x000000FF
+#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
+
+#define DDR0_06 0x06
+#define DDR0_06_WRITEINTERP_MASK 0x01000000
+#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_06_TWTR_MASK 0x00070000
+#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
+#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
+#define DDR0_06_TDLL_MASK 0x0000FF00
+#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_06_TRFC_MASK 0x0000007F
+#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_07 0x07
+#define DDR0_07_NO_CMD_INIT_MASK 0x01000000
+#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_07_TFAW_MASK 0x001F0000
+#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
+#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
+#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100
+#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_07_AREFRESH_MASK 0x00000001
+#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_08 0x08
+#define DDR0_08_WRLAT_MASK 0x07000000
+#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_08_TCPD_MASK 0x00FF0000
+#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_08_DQS_N_EN_MASK 0x00000100
+#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001
+#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_09 0x09
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_09_RTT_0_MASK 0x00030000
+#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F
+#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_10 0x0A
+#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */
+#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_10_CS_MAP_MASK 0x00000300
+#define DDR0_10_CS_MAP_NO_MEM 0x00000000
+#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100
+#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200
+#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
+#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
+
+#define DDR0_11 0x0B
+#define DDR0_11_SREFRESH_MASK 0x01000000
+#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
+#define DDR0_11_TXSNR_MASK 0x00FF0000
+#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_11_TXSR_MASK 0x0000FF00
+#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
+
+#define DDR0_12 0x0C
+#define DDR0_12_TCKE_MASK 0x0000007
+#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0)
+#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7)
+
+#define DDR0_13 0x0D
+
+#define DDR0_14 0x0E
+#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000
+#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
+#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
+#define DDR0_14_REDUC_MASK 0x00010000
+#define DDR0_14_REDUC_64BITS 0x00000000
+#define DDR0_14_REDUC_32BITS 0x00010000
+#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100
+#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
+#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
+
+#define DDR0_15 0x0F
+
+#define DDR0_16 0x10
+
+#define DDR0_17 0x11
+#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000
+#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */
+#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000
+#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000
+#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
+#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
+#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */
+#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+
+#define DDR0_18 0x12
+#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
+#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000
+#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000
+#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00
+#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F
+#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_19 0x13
+#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
+#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000
+#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000
+#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00
+#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F
+#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_20 0x14
+#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000
+#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000
+#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00
+#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F
+#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_21 0x15
+#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000
+#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
+#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000
+#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00
+#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F
+#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+#define DDR0_22 0x16
+/* ECC */
+#define DDR0_22_CTRL_RAW_MASK 0x03000000
+#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */
+#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct*/
+#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */
+#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */
+#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
+#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
+#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00
+#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
+#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
+#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F
+#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
+#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
+
+
+#define DDR0_23 0x17
+#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000
+#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */
+#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
+#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
+#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */
+#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
+#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
+#define DDR0_23_FWC_MASK 0x00000001 /* Write only */
+#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_24 0x18
+#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000
+#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000
+#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
+#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
+#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300
+#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
+#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
+#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003
+#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0)
+#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3)
+
+#define DDR0_25 0x19
+#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */
+#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */
+#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_26 0x1A
+#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000
+#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
+#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
+#define DDR0_26_TREF_MASK 0x00003FFF
+#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+
+#define DDR0_27 0x1B
+#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000
+#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_27_TINIT_MASK 0x0000FFFF
+#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_28 0x1C
+#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000
+#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
+#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
+#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF
+#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0)
+#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF)
+
+#define DDR0_29 0x1D
+
+#define DDR0_30 0x1E
+
+#define DDR0_31 0x1F
+#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF
+#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
+#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
+
+#define DDR0_32 0x20
+#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_33 0x21
+#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_34 0x22
+#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_35 0x23
+#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_36 0x24
+#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_37 0x25
+#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_38 0x26
+#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_39 0x27
+#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */
+#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_40 0x28
+#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_41 0x29
+#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
+#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
+#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
+
+#define DDR0_42 0x2A
+#define DDR0_42_ADDR_PINS_MASK 0x07000000
+#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F
+#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
+#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
+
+#define DDR0_43 0x2B
+#define DDR0_43_TWR_MASK 0x07000000
+#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
+#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
+#define DDR0_43_APREBIT_MASK 0x000F0000
+#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
+#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
+#define DDR0_43_COLUMN_SIZE_MASK 0x00000700
+#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
+#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
+#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001
+#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000
+#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
+#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
+
+#define DDR0_44 0x2C
+#define DDR0_44_TRCD_MASK 0x000000FF
+#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
+#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
+
+#endif /* _SPD_SDRAM_DENALI_H_ */
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index ff211ae..b2b82c7 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -35,9 +35,9 @@ ulong flash_get_size (ulong base, int banknum);
int board_early_init_f(void)
{
- unsigned long sdr0_cust0;
- unsigned long sdr0_pfc1, sdr0_pfc2;
- register uint reg;
+ u32 sdr0_cust0;
+ u32 sdr0_pfc1, sdr0_pfc2;
+ u32 reg;
mtdcr(ebccfga, xbcfg);
mtdcr(ebccfgd, 0xb8400000);
@@ -142,6 +142,7 @@ int misc_init_r(void)
{
uint pbcr;
int size_val = 0;
+ u32 reg;
#ifdef CONFIG_440EPX
unsigned long usb2d0cr = 0;
unsigned long usb2phy0cr, usb2h0cr = 0;
@@ -335,18 +336,33 @@ int misc_init_r(void)
}
#endif /* CONFIG_440EPX */
+ /*
+ * Clear PLB4A0_ACR[WRP]
+ * This fix will make the MAL burst disabling patch for the Linux
+ * EMAC driver obsolete.
+ */
+ reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
+ mtdcr(plb4_acr, reg);
+
return 0;
}
int checkboard(void)
{
char *s = getenv("serial#");
+ u8 rev;
+ u8 val;
#ifdef CONFIG_440EPX
printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
#else
printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
#endif
+
+ rev = *(u8 *)(CFG_CPLD + 0);
+ val = *(u8 *)(CFG_CPLD + 5) & 0x01;
+ printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
+
if (s != NULL) {
puts(", serial# ");
puts(s);
diff --git a/board/amcc/taishan/Makefile b/board/amcc/taishan/Makefile
new file mode 100644
index 0000000..462af00
--- /dev/null
+++ b/board/amcc/taishan/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o lcd.o update.o showinfo.o
+SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/taishan/config.mk b/board/amcc/taishan/config.mk
new file mode 100644
index 0000000..4eefff2
--- /dev/null
+++ b/board/amcc/taishan/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMCC 440GX Reference Platform (Taishan) board
+#
+
+#TEXT_BASE = 0xFFFE0000
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0x07FD0000
+else
+TEXT_BASE = 0xFFFC0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/taishan/init.S b/board/amcc/taishan/init.S
new file mode 100644
index 0000000..8db043b
--- /dev/null
+++ b/board/amcc/taishan/init.S
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+#define _256M 0x10000000
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_8M 0x00000060
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+ tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+ tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X )
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
+ tlbtab_end
diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c
new file mode 100644
index 0000000..8d2dce3
--- /dev/null
+++ b/board/amcc/taishan/lcd.c
@@ -0,0 +1,380 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <miiphy.h>
+
+#ifdef CONFIG_TAISHAN
+
+#define LCD_DELAY_NORMAL_US 100
+#define LCD_DELAY_NORMAL_MS 2
+#define LCD_CMD_ADDR ((volatile char *)(CFG_EBC2_LCM_BASE))
+#define LCD_DATA_ADDR ((volatile char *)(CFG_EBC2_LCM_BASE+1))
+#define LCD_BLK_CTRL ((volatile char *)(CFG_EBC1_FPGA_BASE+0x2))
+
+#define mdelay(t) ({unsigned long msec=(t); while (msec--) { udelay(1000);}})
+
+static int g_lcd_init_b = 0;
+static char *amcc_logo = " AMCC TAISHAN 440GX EvalBoard";
+static char addr_flag = 0x80;
+
+static void lcd_bl_ctrl(char val)
+{
+ char cpld_val;
+
+ cpld_val = *LCD_BLK_CTRL;
+ *LCD_BLK_CTRL = val | cpld_val;
+}
+
+static void lcd_putc(char val)
+{
+ int i = 100;
+ char addr;
+
+ while (i--) {
+ if ((*LCD_CMD_ADDR & 0x80) != 0x80) { /*BF = 1 ? */
+ udelay(LCD_DELAY_NORMAL_US);
+ break;
+ }
+ udelay(LCD_DELAY_NORMAL_US);
+ }
+
+ if (*LCD_CMD_ADDR & 0x80) {
+ printf("LCD is busy\n");
+ return;
+ }
+
+ addr = *LCD_CMD_ADDR;
+ udelay(LCD_DELAY_NORMAL_US);
+ if ((addr != 0) && (addr % 0x10 == 0)) {
+ addr_flag ^= 0x40;
+ *LCD_CMD_ADDR = addr_flag;
+ }
+
+ udelay(LCD_DELAY_NORMAL_US);
+ *LCD_DATA_ADDR = val;
+ udelay(LCD_DELAY_NORMAL_US);
+}
+
+static void lcd_puts(char *s)
+{
+ char *p = s;
+ int i = 100;
+
+ while (i--) {
+ if ((*LCD_CMD_ADDR & 0x80) != 0x80) { /*BF = 1 ? */
+ udelay(LCD_DELAY_NORMAL_US);
+ break;
+ }
+ udelay(LCD_DELAY_NORMAL_US);
+ }
+
+ if (*LCD_CMD_ADDR & 0x80) {
+ printf("LCD is busy\n");
+ return;
+ }
+
+ while (*p)
+ lcd_putc(*p++);
+}
+
+static void lcd_put_logo(void)
+{
+ int i = 100;
+ char *p = amcc_logo;
+
+ while (i--) {
+ if ((*LCD_CMD_ADDR & 0x80) != 0x80) { /*BF = 1 ? */
+ udelay(LCD_DELAY_NORMAL_US);
+ break;
+ }
+ udelay(LCD_DELAY_NORMAL_US);
+ }
+
+ if (*LCD_CMD_ADDR & 0x80) {
+ printf("LCD is busy\n");
+ return;
+ }
+
+ *LCD_CMD_ADDR = 0x80;
+ while (*p)
+ lcd_putc(*p++);
+}
+
+int lcd_init(void)
+{
+ if (g_lcd_init_b == 0) {
+ puts("LCD: ");
+ mdelay(100); /* Waiting for the LCD initialize */
+
+ *LCD_CMD_ADDR = 0x38; /*set function:8-bit,2-line,5x7 font type */
+ udelay(LCD_DELAY_NORMAL_US);
+
+ *LCD_CMD_ADDR = 0x0f; /*set display on,cursor on,blink on */
+ udelay(LCD_DELAY_NORMAL_US);
+
+ *LCD_CMD_ADDR = 0x01; /*display clear */
+ mdelay(LCD_DELAY_NORMAL_MS);
+
+ *LCD_CMD_ADDR = 0x06; /*set entry */
+ udelay(LCD_DELAY_NORMAL_US);
+
+ lcd_bl_ctrl(0x02);
+ lcd_put_logo();
+
+ puts(" ready\n");
+ g_lcd_init_b = 1;
+ }
+
+ return 0;
+}
+
+static int do_lcd_test(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ lcd_init();
+ return 0;
+}
+
+static int do_lcd_clear(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ *LCD_CMD_ADDR = 0x01;
+ mdelay(LCD_DELAY_NORMAL_MS);
+ return 0;
+}
+static int do_lcd_puts(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ if (argc < 2) {
+ printf("%s", cmdtp->usage);
+ return 1;
+ }
+ lcd_puts(argv[1]);
+ return 0;
+}
+static int do_lcd_putc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ if (argc < 2) {
+ printf("%s", cmdtp->usage);
+ return 1;
+ }
+ lcd_putc((char)argv[1][0]);
+ return 0;
+}
+static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ ulong count;
+ ulong dir;
+ char cur_addr;
+
+ if (argc < 3) {
+ printf("%s", cmdtp->usage);
+ return 1;
+ }
+
+ count = simple_strtoul(argv[1], NULL, 16);
+ if (count > 31) {
+ printf("unable to shift > 0x20\n");
+ count = 0;
+ }
+
+ dir = simple_strtoul(argv[2], NULL, 16);
+ cur_addr = *LCD_CMD_ADDR;
+ udelay(LCD_DELAY_NORMAL_US);
+ if (dir == 0x0) {
+ if (addr_flag == 0x80) {
+ if (count >= (cur_addr & 0xf)) {
+ *LCD_CMD_ADDR = 0x80;
+ udelay(LCD_DELAY_NORMAL_US);
+ count = 0;
+ }
+ } else {
+ if (count >= ((cur_addr & 0x0f) + 0x0f)) {
+ *LCD_CMD_ADDR = 0x80;
+ addr_flag = 0x80;
+ udelay(LCD_DELAY_NORMAL_US);
+ count = 0x0;
+ } else if (count >= (cur_addr & 0xf)) {
+ count -= cur_addr & 0xf;
+ *LCD_CMD_ADDR = 0x80 | 0xf;
+ addr_flag = 0x80;
+ udelay(LCD_DELAY_NORMAL_US);
+ }
+ }
+ } else {
+ if (addr_flag == 0x80) {
+ if (count >= (0x1f - (cur_addr & 0xf))) {
+ count = 0x0;
+ addr_flag = 0xc0;
+ *LCD_CMD_ADDR = 0xc0 | 0xf;
+ udelay(LCD_DELAY_NORMAL_US);
+ } else if ((count + (cur_addr & 0xf)) >= 0x0f) {
+ count = count + (cur_addr & 0xf) - 0x0f;
+ addr_flag = 0xc0;
+ *LCD_CMD_ADDR = 0xc0;
+ udelay(LCD_DELAY_NORMAL_US);
+ }
+ } else if ((count + (cur_addr & 0xf)) >= 0x0f) {
+ count = 0x0;
+ *LCD_CMD_ADDR = 0xc0 | 0xf;
+ udelay(LCD_DELAY_NORMAL_US);
+ }
+ }
+
+ while (count--) {
+ if (dir == 0) {
+ *LCD_CMD_ADDR = 0x10;
+ } else {
+ *LCD_CMD_ADDR = 0x14;
+ }
+ udelay(LCD_DELAY_NORMAL_US);
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd_test - lcd test display\n", NULL);
+U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd_cls - lcd clear display\n", NULL);
+U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts,
+ "lcd_puts - display string on lcd\n",
+ "<string> - <string> to be displayed\n");
+U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc,
+ "lcd_putc - display char on lcd\n",
+ "<char> - <char> to be displayed\n");
+U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur,
+ "lcd_cur - shift cursor on lcd\n",
+ "<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n"
+ " <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n");
+
+#if 0 /* test-only */
+void set_phy_loopback_mode(void)
+{
+ char devemac2[32];
+ char devemac3[32];
+
+ sprintf(devemac2, "%s2", CONFIG_EMAC_DEV_NAME);
+ sprintf(devemac3, "%s3", CONFIG_EMAC_DEV_NAME);
+
+#if 0
+ unsigned short reg_short;
+
+ miiphy_read(devemac2, 0x1, 1, &reg_short);
+ if (reg_short & 0x04) {
+ /*
+ * printf("EMAC2 link up,do nothing\n");
+ */
+ } else {
+ udelay(1000);
+ miiphy_write(devemac2, 0x1, 0, 0x6000);
+ udelay(1000);
+ miiphy_read(devemac2, 0x1, 0, &reg_short);
+ if (reg_short != 0x6000) {
+ printf
+ ("\nEMAC2 error set LOOPBACK mode error,reg2[0]=%x\n",
+ reg_short);
+ }
+ }
+
+ miiphy_read(devemac3, 0x3, 1, &reg_short);
+ if (reg_short & 0x04) {
+ /*
+ * printf("EMAC3 link up,do nothing\n");
+ */
+ } else {
+ udelay(1000);
+ miiphy_write(devemac3, 0x3, 0, 0x6000);
+ udelay(1000);
+ miiphy_read(devemac3, 0x3, 0, &reg_short);
+ if (reg_short != 0x6000) {
+ printf
+ ("\nEMAC3 error set LOOPBACK mode error,reg2[0]=%x\n",
+ reg_short);
+ }
+ }
+#else
+ /* Set PHY as LOOPBACK MODE, for Linux emac initializing */
+ miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0, 0x6000);
+ udelay(1000);
+ miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0, 0x6000);
+ udelay(1000);
+#endif /* 0 */
+}
+
+void set_phy_normal_mode(void)
+{
+ char devemac2[32];
+ char devemac3[32];
+ unsigned short reg_short;
+
+ sprintf(devemac2, "%s2", CONFIG_EMAC_DEV_NAME);
+ sprintf(devemac3, "%s3", CONFIG_EMAC_DEV_NAME);
+
+ /* Set phy of EMAC2 */
+ miiphy_read(devemac2, CONFIG_PHY2_ADDR, 0x16, &reg_short);
+ reg_short &= ~(0x7);
+ reg_short |= 0x6; /* RGMII DLL Delay */
+ miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x16, reg_short);
+
+ miiphy_read(devemac2, CONFIG_PHY2_ADDR, 0x17, &reg_short);
+ reg_short &= ~(0x40);
+ miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x17, reg_short);
+
+ miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x1c, 0x74f0);
+
+ /* Set phy of EMAC3 */
+ miiphy_read(devemac3, CONFIG_PHY3_ADDR, 0x16, &reg_short);
+ reg_short &= ~(0x7);
+ reg_short |= 0x6; /* RGMII DLL Delay */
+ miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x16, reg_short);
+
+ miiphy_read(devemac3, CONFIG_PHY3_ADDR, 0x17, &reg_short);
+ reg_short &= ~(0x40);
+ miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x17, reg_short);
+
+ miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x1c, 0x74f0);
+}
+#endif /* 0 - test only */
+
+static int do_led_test_off(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ volatile unsigned int *GpioOr =
+ (volatile unsigned int *)(CFG_PERIPHERAL_BASE + 0x700);
+ *GpioOr |= 0x00300000;
+ return 0;
+}
+
+static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ volatile unsigned int *GpioOr =
+ (volatile unsigned int *)(CFG_PERIPHERAL_BASE + 0x700);
+ *GpioOr &= ~0x00300000;
+ return 0;
+}
+
+U_BOOT_CMD(ledon, 1, 1, do_led_test_on,
+ "ledon - led test light on\n", NULL);
+
+U_BOOT_CMD(ledoff, 1, 1, do_led_test_off,
+ "ledoff - led test light off\n", NULL);
+#endif
diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c
new file mode 100644
index 0000000..57b9d1c
--- /dev/null
+++ b/board/amcc/taishan/showinfo.c
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <pci.h>
+
+void show_reset_reg(void)
+{
+ unsigned long reg;
+
+ /* read clock regsiter */
+ printf("===== Display reset and initialize register Start =========\n");
+ mfclk(clk_pllc,reg);
+ printf("cpr_pllc = %#010x\n",reg);
+
+ mfclk(clk_plld,reg);
+ printf("cpr_plld = %#010x\n",reg);
+
+ mfclk(clk_primad,reg);
+ printf("cpr_primad = %#010x\n",reg);
+
+ mfclk(clk_primbd,reg);
+ printf("cpr_primbd = %#010x\n",reg);
+
+ mfclk(clk_opbd,reg);
+ printf("cpr_opbd = %#010x\n",reg);
+
+ mfclk(clk_perd,reg);
+ printf("cpr_perd = %#010x\n",reg);
+
+ mfclk(clk_mald,reg);
+ printf("cpr_mald = %#010x\n",reg);
+
+ /* read sdr register */
+ mfsdr(sdr_ebc,reg);
+ printf("sdr_ebc = %#010x\n",reg);
+
+ mfsdr(sdr_cp440,reg);
+ printf("sdr_cp440 = %#010x\n",reg);
+
+ mfsdr(sdr_xcr,reg);
+ printf("sdr_xcr = %#010x\n",reg);
+
+ mfsdr(sdr_xpllc,reg);
+ printf("sdr_xpllc = %#010x\n",reg);
+
+ mfsdr(sdr_xplld,reg);
+ printf("sdr_xplld = %#010x\n",reg);
+
+ mfsdr(sdr_pfc0,reg);
+ printf("sdr_pfc0 = %#010x\n",reg);
+
+ mfsdr(sdr_pfc1,reg);
+ printf("sdr_pfc1 = %#010x\n",reg);
+
+ mfsdr(sdr_cust0,reg);
+ printf("sdr_cust0 = %#010x\n",reg);
+
+ mfsdr(sdr_cust1,reg);
+ printf("sdr_cust1 = %#010x\n",reg);
+
+ mfsdr(sdr_uart0,reg);
+ printf("sdr_uart0 = %#010x\n",reg);
+
+ mfsdr(sdr_uart1,reg);
+ printf("sdr_uart1 = %#010x\n",reg);
+
+ printf("===== Display reset and initialize register End =========\n");
+}
+
+void show_xbridge_info(void)
+{
+ unsigned long reg;
+
+ printf("PCI-X chip control registers\n");
+ mfsdr(sdr_xcr, reg);
+ printf("sdr_xcr = %#010x\n", reg);
+
+ mfsdr(sdr_xpllc, reg);
+ printf("sdr_xpllc = %#010x\n", reg);
+
+ mfsdr(sdr_xplld, reg);
+ printf("sdr_xplld = %#010x\n", reg);
+
+ printf("PCI-X Bridge Configure registers\n");
+ printf("PCIX0_VENDID = %#06x\n", in16r(PCIX0_VENDID));
+ printf("PCIX0_DEVID = %#06x\n", in16r(PCIX0_DEVID));
+ printf("PCIX0_CMD = %#06x\n", in16r(PCIX0_CMD));
+ printf("PCIX0_STATUS = %#06x\n", in16r(PCIX0_STATUS));
+ printf("PCIX0_REVID = %#04x\n", in8(PCIX0_REVID));
+ printf("PCIX0_CACHELS = %#04x\n", in8(PCIX0_CACHELS));
+ printf("PCIX0_LATTIM = %#04x\n", in8(PCIX0_LATTIM));
+ printf("PCIX0_HDTYPE = %#04x\n", in8(PCIX0_HDTYPE));
+ printf("PCIX0_BIST = %#04x\n", in8(PCIX0_BIST));
+
+ printf("PCIX0_BAR0 = %#010x\n", in32r(PCIX0_BAR0));
+ printf("PCIX0_BAR1 = %#010x\n", in32r(PCIX0_BAR1));
+ printf("PCIX0_BAR2 = %#010x\n", in32r(PCIX0_BAR2));
+ printf("PCIX0_BAR3 = %#010x\n", in32r(PCIX0_BAR3));
+ printf("PCIX0_BAR4 = %#010x\n", in32r(PCIX0_BAR4));
+ printf("PCIX0_BAR5 = %#010x\n", in32r(PCIX0_BAR5));
+
+ printf("PCIX0_CISPTR = %#010x\n", in32r(PCIX0_CISPTR));
+ printf("PCIX0_SBSSYSVID = %#010x\n", in16r(PCIX0_SBSYSVID));
+ printf("PCIX0_SBSSYSID = %#010x\n", in16r(PCIX0_SBSYSID));
+ printf("PCIX0_EROMBA = %#010x\n", in32r(PCIX0_EROMBA));
+ printf("PCIX0_CAP = %#04x\n", in8(PCIX0_CAP));
+ printf("PCIX0_INTLN = %#04x\n", in8(PCIX0_INTLN));
+ printf("PCIX0_INTPN = %#04x\n", in8(PCIX0_INTPN));
+ printf("PCIX0_MINGNT = %#04x\n", in8(PCIX0_MINGNT));
+ printf("PCIX0_MAXLTNCY = %#04x\n", in8(PCIX0_MAXLTNCY));
+
+ printf("PCIX0_BRDGOPT1 = %#010x\n", in32r(PCIX0_BRDGOPT1));
+ printf("PCIX0_BRDGOPT2 = %#010x\n", in32r(PCIX0_BRDGOPT2));
+
+ printf("PCIX0_POM0LAL = %#010x\n", in32r(PCIX0_POM0LAL));
+ printf("PCIX0_POM0LAH = %#010x\n", in32r(PCIX0_POM0LAH));
+ printf("PCIX0_POM0SA = %#010x\n", in32r(PCIX0_POM0SA));
+ printf("PCIX0_POM0PCILAL = %#010x\n", in32r(PCIX0_POM0PCIAL));
+ printf("PCIX0_POM0PCILAH = %#010x\n", in32r(PCIX0_POM0PCIAH));
+ printf("PCIX0_POM1LAL = %#010x\n", in32r(PCIX0_POM1LAL));
+ printf("PCIX0_POM1LAH = %#010x\n", in32r(PCIX0_POM1LAH));
+ printf("PCIX0_POM1SA = %#010x\n", in32r(PCIX0_POM1SA));
+ printf("PCIX0_POM1PCILAL = %#010x\n", in32r(PCIX0_POM1PCIAL));
+ printf("PCIX0_POM1PCILAH = %#010x\n", in32r(PCIX0_POM1PCIAH));
+ printf("PCIX0_POM2SA = %#010x\n", in32r(PCIX0_POM2SA));
+
+ printf("PCIX0_PIM0SA = %#010x\n", in32r(PCIX0_PIM0SA));
+ printf("PCIX0_PIM0LAL = %#010x\n", in32r(PCIX0_PIM0LAL));
+ printf("PCIX0_PIM0LAH = %#010x\n", in32r(PCIX0_PIM0LAH));
+ printf("PCIX0_PIM1SA = %#010x\n", in32r(PCIX0_PIM1SA));
+ printf("PCIX0_PIM1LAL = %#010x\n", in32r(PCIX0_PIM1LAL));
+ printf("PCIX0_PIM1LAH = %#010x\n", in32r(PCIX0_PIM1LAH));
+ printf("PCIX0_PIM2SA = %#010x\n", in32r(PCIX0_PIM1SA));
+ printf("PCIX0_PIM2LAL = %#010x\n", in32r(PCIX0_PIM1LAL));
+ printf("PCIX0_PIM2LAH = %#010x\n", in32r(PCIX0_PIM1LAH));
+
+ printf("PCIX0_XSTS = %#010x\n", in32r(PCIX0_STS));
+}
+
+int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ show_xbridge_info();
+ return 0;
+}
+
+U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info,
+ "xbriinfo - Show PCIX bridge info\n", NULL);
+
+#define TAISHAN_PCI_DEV_ID0 0x800
+#define TAISHAN_PCI_DEV_ID1 0x1000
+
+void show_pcix_device_info(void)
+{
+ int ii;
+ int dev;
+ u8 capp;
+ u8 xcapid;
+ u16 status;
+ u16 xcommand;
+ u32 xstatus;
+
+ for (ii = 0; ii < 2; ii++) {
+ if (ii == 0)
+ dev = TAISHAN_PCI_DEV_ID0;
+ else
+ dev = TAISHAN_PCI_DEV_ID1;
+
+ pci_read_config_word(dev, PCI_STATUS, &status);
+ if (status & PCI_STATUS_CAP_LIST) {
+ pci_read_config_byte(dev, PCI_CAPABILITY_LIST, &capp);
+
+ pci_read_config_byte(dev, (int)(capp), &xcapid);
+ if (xcapid == 0x07) {
+ pci_read_config_word(dev, (int)(capp + 2),
+ &xcommand);
+ pci_read_config_dword(dev, (int)(capp + 4),
+ &xstatus);
+ printf("BUS0 dev%d Xcommand=%#06x,Xstatus=%#010x\n",
+ (ii + 1), xcommand, xstatus);
+ } else {
+ printf("BUS0 dev%d PCI-X CAP ID error,"
+ "CAP=%#04x,XCAPID=%#04x\n",
+ (ii + 1), capp, xcapid);
+ }
+ } else {
+ printf("BUS0 dev%d not found PCI_STATUS_CAP_LIST supporting\n",
+ ii + 1);
+ }
+ }
+
+}
+
+int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc,
+ char *argv[])
+{
+ show_pcix_device_info();
+ return 0;
+}
+
+U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info,
+ "xdevinfo - Show PCIX Device info\n", NULL);
+
+extern void show_reset_reg(void);
+
+int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ show_reset_reg();
+ return 0;
+}
+
+U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info,
+ "resetinfo - Show Reset REG info\n", NULL);
diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c
new file mode 100644
index 0000000..1a2e53b
--- /dev/null
+++ b/board/amcc/taishan/taishan.c
@@ -0,0 +1,331 @@
+/*
+ * Copyright (C) 2004 PaulReynolds@lhsolutions.com
+ *
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+#include <ppc4xx_enet.h>
+
+#ifdef CFG_INIT_SHOW_RESET_REG
+void show_reset_reg(void);
+#endif
+
+int lcd_init(void);
+
+int board_early_init_f (void)
+{
+ unsigned long reg;
+ volatile unsigned int *GpioOdr;
+ volatile unsigned int *GpioTcr;
+ volatile unsigned int *GpioOr;
+
+ /*-------------------------------------------------------------------------+
+ | Initialize EBC CONFIG
+ +-------------------------------------------------------------------------*/
+ mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+ EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK |
+ EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
+ EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_DEFAULT |
+ EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
+
+ /*-------------------------------------------------------------------------+
+ | 64MB FLASH. Initialize bank 0 with default values.
+ +-------------------------------------------------------------------------*/
+ mtebc(pb0ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(15) |
+ EBC_BXAP_BCE_DISABLE |
+ EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) |
+ EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) |
+ EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED |
+ EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+ mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) |
+ EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_32BIT);
+
+ /*-------------------------------------------------------------------------+
+ | FPGA. Initialize bank 1 with default values.
+ +-------------------------------------------------------------------------*/
+ mtebc(pb1ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(5) |
+ EBC_BXAP_BCE_DISABLE |
+ EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) |
+ EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) |
+ EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED |
+ EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+ mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x41000000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
+
+ /*-------------------------------------------------------------------------+
+ | LCM. Initialize bank 2 with default values.
+ +-------------------------------------------------------------------------*/
+ mtebc(pb2ap, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(64) |
+ EBC_BXAP_BCE_DISABLE |
+ EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) |
+ EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) |
+ EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED |
+ EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+ mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0x42000000) |
+ EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
+
+ /*-------------------------------------------------------------------------+
+ | TMP. Initialize bank 3 with default values.
+ +-------------------------------------------------------------------------*/
+ mtebc(pb3ap, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(128) |
+ EBC_BXAP_BCE_DISABLE |
+ EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) |
+ EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) |
+ EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED |
+ EBC_BXAP_BEM_WRITEONLY |
+ EBC_BXAP_PEN_DISABLED);
+ mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48000000) |
+ EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
+
+ /*-------------------------------------------------------------------------+
+ | Connector 4~7. Initialize bank 3~ 7 with default values.
+ +-------------------------------------------------------------------------*/
+ mtebc(pb4ap,0);
+ mtebc(pb4cr,0);
+ mtebc(pb5ap,0);
+ mtebc(pb5cr,0);
+ mtebc(pb6ap,0);
+ mtebc(pb6cr,0);
+ mtebc(pb7ap,0);
+ mtebc(pb7cr,0);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+ mtdcr (uic0er, 0x00000000); /* disable all */
+ mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */
+ mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr (uic1er, 0x00000000); /* disable all */
+ mtdcr (uic1cr, 0x00000000); /* all non-critical */
+ mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+ mtdcr (uic2er, 0x00000000); /* disable all */
+ mtdcr (uic2cr, 0x00000000); /* all non-critical */
+ mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */
+ mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+
+ mtdcr (uicb0sr, 0xfc000000); /* clear all */
+ mtdcr (uicb0er, 0x00000000); /* disable all */
+ mtdcr (uicb0cr, 0x00000000); /* all non-critical */
+ mtdcr (uicb0pr, 0xfc000000); /* */
+ mtdcr (uicb0tr, 0x00000000); /* */
+ mtdcr (uicb0vr, 0x00000001); /* */
+
+ /* Enable two GPIO 10~11 and TraceA signal */
+ mfsdr(sdr_pfc0,reg);
+ reg |= 0x00300000;
+ mtsdr(sdr_pfc0,reg);
+
+ mfsdr(sdr_pfc1,reg);
+ reg |= 0x00100000;
+ mtsdr(sdr_pfc1,reg);
+
+ /* Set GPIO 10 and 11 as output */
+ GpioOdr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x718);
+ GpioTcr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x704);
+ GpioOr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x700);
+
+ *GpioOdr &= ~(0x00300000);
+ *GpioTcr |= 0x00300000;
+ *GpioOr |= 0x00300000;
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ lcd_init();
+
+ return 0;
+}
+
+int checkboard (void)
+{
+ char *s = getenv ("serial#");
+
+ printf ("Board: Taishan - AMCC PPC440GX Evaluation Board");
+ if (s != NULL) {
+ puts (", serial# ");
+ puts (s);
+ }
+ putc ('\n');
+
+#ifdef CFG_INIT_SHOW_RESET_REG
+ show_reset_reg();
+#endif
+
+ return (0);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) 0x04000000;
+ uint *pend = (uint *) 0x0fc00000;
+ uint *p;
+
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+ unsigned long strap;
+
+ /*--------------------------------------------------------------------------+
+ * The ocotea board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
+ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
+ return 0;
+ }
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*--------------------------------------------------------------------------+
+ * Disable everything
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0SA, 0 ); /* disable */
+ out32r( PCIX0_PIM1SA, 0 ); /* disable */
+ out32r( PCIX0_PIM2SA, 0 ); /* disable */
+ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+ /*--------------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+ * options to not support sizes such as 128/256 MB.
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAH, 0 );
+ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+
+ out32r( PCIX0_BAR0, 0 );
+
+ /*--------------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *--------------------------------------------------------------------------*/
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* The ocotea board is always configured as host. */
+ return(1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return (ctrlc());
+}
+#endif
diff --git a/board/amcc/taishan/u-boot.lds b/board/amcc/taishan/u-boot.lds
new file mode 100644
index 0000000..664716e
--- /dev/null
+++ b/board/amcc/taishan/u-boot.lds
@@ -0,0 +1,157 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/amcc/taishan/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c
new file mode 100644
index 0000000..ed2c196
--- /dev/null
+++ b/board/amcc/taishan/update.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <i2c.h>
+
+#if defined(CONFIG_TAISHAN)
+
+const uchar bootstrap_buf[16] = {
+ 0x86,
+ 0x78,
+ 0xc1,
+ 0xa6,
+ 0x09,
+ 0x67,
+ 0x04,
+ 0x63,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x00
+};
+
+static int update_boot_eeprom(void)
+{
+ ulong len = 0x10;
+ uchar chip = CFG_BOOTSTRAP_IIC_ADDR;
+ uchar *pbuf = (uchar *)bootstrap_buf;
+ int ii, jj;
+
+ for (ii = 0; ii < len; ii++) {
+ if (i2c_write(chip, ii, 1, &pbuf[ii], 1) != 0) {
+ printf("i2c_write failed\n");
+ return -1;
+ }
+
+ /* wait 10ms */
+ for (jj = 0; jj < 10; jj++)
+ udelay(1000);
+ }
+ return 0;
+}
+
+int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ return update_boot_eeprom();
+}
+
+U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom,
+ "update_boot_eeprom - update bootstrap eeprom content\n", NULL);
+#endif
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
index 754ae44..04f58e0 100644
--- a/board/amcc/yellowstone/yellowstone.c
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -39,24 +39,6 @@ int board_early_init_f(void)
reg = mfdcr(ebccfgd);
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
- mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
- mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */
-
- mtebc(pb1ap, 0x00000000);
- mtebc(pb1cr, 0x00000000);
-
- mtebc(pb2ap, 0x04814500);
- /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
-
- mtebc(pb3ap, 0x00000000);
- mtebc(pb3cr, 0x00000000);
-
- mtebc(pb4ap, 0x00000000);
- mtebc(pb4cr, 0x00000000);
-
- mtebc(pb5ap, 0x00000000);
- mtebc(pb5cr, 0x00000000);
-
/*--------------------------------------------------------------------
* Setup the GPIO pins
*-------------------------------------------------------------------*/
@@ -190,8 +172,15 @@ int misc_init_r (void)
int checkboard(void)
{
char *s = getenv("serial#");
+ u8 rev;
+ u8 val;
printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
+
+ rev = *(u8 *)(CFG_CPLD + 0);
+ val = *(u8 *)(CFG_CPLD + 5) & 0x01;
+ printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
+
if (s != NULL) {
puts(", serial# ");
puts(s);
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 588ee90..d47219c 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -39,24 +39,6 @@ int board_early_init_f(void)
reg = mfdcr(ebccfgd);
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
- mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
- mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */
-
- mtebc(pb1ap, 0x00000000);
- mtebc(pb1cr, 0x00000000);
-
- mtebc(pb2ap, 0x04814500);
- /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
-
- mtebc(pb3ap, 0x00000000);
- mtebc(pb3cr, 0x00000000);
-
- mtebc(pb4ap, 0x00000000);
- mtebc(pb4cr, 0x00000000);
-
- mtebc(pb5ap, 0x00000000);
- mtebc(pb5cr, 0x00000000);
-
/*--------------------------------------------------------------------
* Setup the GPIO pins
*-------------------------------------------------------------------*/
@@ -186,8 +168,15 @@ int misc_init_r (void)
int checkboard(void)
{
char *s = getenv("serial#");
+ u8 rev;
+ u8 val;
printf("Board: Yosemite - AMCC PPC440EP Evaluation Board");
+
+ rev = *(u8 *)(CFG_CPLD + 0);
+ val = *(u8 *)(CFG_CPLD + 5) & 0x01;
+ printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
+
if (s != NULL) {
puts(", serial# ");
puts(s);
diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c
index 63e4139..f1bb721 100644
--- a/board/mcc200/auto_update.c
+++ b/board/mcc200/auto_update.c
@@ -121,10 +121,10 @@ struct flash_layout aufl_layout[AU_MAXFILES] = { \
#define I2C_PSOC_KEYPAD_ADDR 0x53
/* keypad mask */
-#define KEYPAD_ROW 3
-#define KEYPAD_COL 3
-#define KEYPAD_MASK_LO ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))&0xFF)
-#define KEYPAD_MASK_HI ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))>>8)
+#define KEYPAD_ROW 2
+#define KEYPAD_COL 2
+#define KEYPAD_MASK_LO ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))&0xFF)
+#define KEYPAD_MASK_HI ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))>>8)
/* externals */
extern int fat_register_device(block_dev_desc_t *, int);
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index 67969a6..af047e2 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -92,8 +92,8 @@ static void sdram_start (int hi_addr)
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
- * is something else than 0x00000000.
+ * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * is something else than 0x00000000.
*/
long int initdram (int board_type)
@@ -228,10 +228,6 @@ int misc_init_r (void)
{
ulong flash_sup_end, snum;
-#ifdef CONFIG_AUTO_UPDATE
- /* this has priority over all else */
- do_auto_update();
-#endif
/*
* Adjust flash start and offset to detected values
*/
@@ -294,6 +290,9 @@ int misc_init_r (void)
flash_info[0].sector_count = snum;
}
+#ifdef CONFIG_AUTO_UPDATE
+ do_auto_update();
+#endif
return (0);
}
diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
index 2389561..5abc87d 100644
--- a/board/prodrive/alpr/alpr.c
+++ b/board/prodrive/alpr/alpr.c
@@ -77,8 +77,12 @@ int board_early_init_f (void)
mtdcr (uicb0tr, 0x00000000); /* */
mtdcr (uicb0vr, 0x00000001); /* */
+ /* Setup shutdown/SSD empty interrupt as inputs */
+ out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
+ out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
+
/* Setup GPIO/IRQ multiplexing */
- mtsdr(sdr_pfc0, 0x01a03e00);
+ mtsdr(sdr_pfc0, 0x01a33e00);
return 0;
}
@@ -105,26 +109,11 @@ int last_stage_init(void)
static int board_rev(void)
{
- int rev;
- u32 pfc0;
-
- /* Setup GPIO14 & 15 as GPIO */
- mfsdr(sdr_pfc0, pfc0);
- pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1;
- mtsdr(sdr_pfc0, pfc0);
-
/* Setup as input */
- out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
- out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
-
- rev = (in32(GPIO0_IR) >> 16) & 0x3;
-
- /* Setup GPIO14 & 15 as non GPIO again */
- mfsdr(sdr_pfc0, pfc0);
- pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1);
- mtsdr(sdr_pfc0, pfc0);
+ out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
+ out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
- return rev;
+ return (in32(GPIO0_IR) >> 16) & 0x3;
}
int checkboard (void)
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
index e63c921..d66b088 100644
--- a/board/prodrive/alpr/nand.c
+++ b/board/prodrive/alpr/nand.c
@@ -154,7 +154,7 @@ static int alpr_nand_dev_ready(struct mtd_info *mtd)
return 1;
}
-void board_nand_init(struct nand_chip *nand)
+int board_nand_init(struct nand_chip *nand)
{
alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE;
@@ -169,5 +169,7 @@ void board_nand_init(struct nand_chip *nand)
nand->read_buf = alpr_nand_read_buf;
nand->verify_buf = alpr_nand_verify_buf;
nand->dev_ready = alpr_nand_dev_ready;
+
+ return 0;
}
#endif
diff --git a/board/prodrive/p3mx/p3mx.c b/board/prodrive/p3mx/p3mx.c
index 6cebd1a..d54ddaf 100644
--- a/board/prodrive/p3mx/p3mx.c
+++ b/board/prodrive/p3mx/p3mx.c
@@ -45,6 +45,7 @@
#include "mpsc.h"
#include "64460.h"
#include "mv_regs.h"
+#include "p3mx.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -79,6 +80,7 @@ extern flash_info_t flash_info[];
void board_prebootm_init (void);
unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
int display_mem_map (void);
+void set_led(int);
/* ------------------------------------------------------------------------- */
@@ -246,7 +248,6 @@ int board_early_init_f (void)
* that if it's not at the power-on location, it's where we put
* it last time. (huber)
*/
-
my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
#ifdef CONFIG_PCI
@@ -287,6 +288,8 @@ int board_early_init_f (void)
GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+ set_led(LED_RED);
+
return 0;
}
@@ -332,6 +335,7 @@ void after_reloc (ulong dest_addr, gd_t * gd)
/* display_mem_map(); */
/* now, jump to the main U-Boot board init code */
+ set_led(LED_GREEN);
board_init_r (gd, dest_addr);
/* NOTREACHED */
}
@@ -356,15 +360,66 @@ int checkboard (void)
return (0);
}
-/* utility functions */
-void debug_led (int led, int mode)
+void set_led(int col)
{
+ int tmp;
+ int on_pin;
+ int off_pin;
+
+ /* Program Mpp[22] as Gpp[22]
+ * Program Mpp[23] as Gpp[23]
+ */
+ tmp = GTREGREAD(MPP_CONTROL2);
+ tmp &= 0x00ffffff;
+ GT_REG_WRITE(MPP_CONTROL2,tmp);
+
+ /* Program Gpp[22] and Gpp[23] as output
+ */
+ tmp = GTREGREAD(GPP_IO_CONTROL);
+ tmp |= 0x00C00000;
+ GT_REG_WRITE(GPP_IO_CONTROL, tmp);
+
+ /* Program Gpp[22] and Gpp[23] as active high
+ */
+ tmp = GTREGREAD(GPP_LEVEL_CONTROL);
+ tmp &= 0xff3fffff;
+ GT_REG_WRITE(GPP_LEVEL_CONTROL, tmp);
+
+ switch(col) {
+ default:
+ case LED_OFF :
+ on_pin = 0;
+ off_pin = ((1 << 23) | (1 << 22));
+ break;
+ case LED_RED :
+ on_pin = (1 << 23);
+ off_pin = (1 << 22);
+ break;
+ case LED_GREEN :
+ on_pin = (1 << 22);
+ off_pin = (1 << 23);
+ break;
+ case LED_ORANGE :
+ on_pin = ((1 << 23) | (1 << 22));
+ off_pin = 0;
+ break;
+ }
+
+ /* Set output Gpp[22] and Gpp[23]
+ */
+ tmp = GTREGREAD(GPP_VALUE);
+ tmp |= on_pin;
+ tmp &= ~off_pin;
+ GT_REG_WRITE(GPP_VALUE, tmp);
}
int display_mem_map (void)
{
- int i, j;
+ int i;
unsigned int base, size, width;
+#ifdef CONFIG_PCI
+ int j;
+#endif
/* SDRAM */
printf ("SD (DDR) RAM\n");
diff --git a/board/prodrive/p3mx/sdram_init.c b/board/prodrive/p3mx/sdram_init.c
index 176252e..0464860 100644
--- a/board/prodrive/p3mx/sdram_init.c
+++ b/board/prodrive/p3mx/sdram_init.c
@@ -65,7 +65,7 @@ int mvDmaTransfer (int, ulong, ulong, ulong, ulong);
int memory_map_bank (unsigned int bankNo,
unsigned int bankBase, unsigned int bankLength)
{
-#ifdef MAP_PCI
+#if defined (MAP_PCI) && defined (CONFIG_PCI)
PCI_HOST host;
#endif
@@ -80,7 +80,7 @@ int memory_map_bank (unsigned int bankNo,
memoryMapBank (bankNo, bankBase, bankLength);
-#ifdef MAP_PCI
+#if defined (MAP_PCI) && defined (CONFIG_PCI)
for (host = PCI_HOST0; host <= PCI_HOST1; host++) {
const int features =
PREFETCH_ENABLE |
diff --git a/board/prodrive/pdnb3/flash.c b/board/prodrive/pdnb3/flash.c
index d0e5fe7..518ea9c 100644
--- a/board/prodrive/pdnb3/flash.c
+++ b/board/prodrive/pdnb3/flash.c
@@ -24,6 +24,8 @@
#include <common.h>
#include <asm/arch/ixp425.h>
+#if !defined(CFG_FLASH_CFI_DRIVER)
+
/*
* include common flash code (for esd boards)
*/
@@ -83,3 +85,5 @@ unsigned long flash_init(void)
return size;
}
+
+#endif /* CFG_FLASH_CFI_DRIVER */
diff --git a/board/sc3/Makefile b/board/sc3/Makefile
new file mode 100644
index 0000000..1b0b15f
--- /dev/null
+++ b/board/sc3/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o sc3nand.o
+SOBJS = init.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/sc3/config.mk b/board/sc3/config.mk
new file mode 100644
index 0000000..1bdf5e4
--- /dev/null
+++ b/board/sc3/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
diff --git a/board/sc3/init.S b/board/sc3/init.S
new file mode 100644
index 0000000..e7b3c83
--- /dev/null
+++ b/board/sc3/init.S
@@ -0,0 +1,382 @@
+/*------------------------------------------------------------------------------+
+ *
+ * This souce code has been made available to you by EuroDesign
+ * (www.eurodsn.de). It's based on the original IBM source code, so
+ * this follows:
+ *
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ *------------------------------------------------------------------------------- */
+
+#include <config.h>
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/**
+ * ext_bus_cntlr_init - Initializes the External Bus Controller for the external peripherals
+ *
+ * IMPORTANT: For pass1 this code must run from cache since you can not
+ * reliably change a peripheral banks timing register (pbxap) while running
+ * code from that bank. For ex., since we are running from ROM on bank 0, we
+ * can NOT execute the code that modifies bank 0 timings from ROM, so
+ * we run it from cache.
+ *
+ * Bank 0 - Boot-Flash
+ * Bank 1 - NAND-Flash
+ * Bank 2 - ISA bus
+ * Bank 3 - Second Flash
+ * Bank 4 - USB controller
+ */
+ .globl ext_bus_cntlr_init
+ext_bus_cntlr_init:
+/*
+ * We need the current boot up configuration to set correct
+ * timings into internal flash and external flash
+ */
+ mfdcr r24,strap /* xxxx xxxx xxxx xxx? ?xxx xxxx xxxx xxxx
+ 0 0 -> 8 bit external ROM
+ 0 1 -> 16 bit internal ROM */
+ addi r4,0,2
+ srw r24,r24,r4 /* shift right r24 two positions */
+ andi. r24,r24,0x06000
+/*
+ * All calculations are based on 33MHz EBC clock.
+ *
+ * First, create a "very slow" timing (~250ns) with burst mode enabled
+ * This is need for the external flash access
+ */
+ lis r25,0x0800
+ ori r25,r25,0x0280 /* 0000 1000 0xxx 0000 0000 0010 100x xxxx = 0x03800280
+/*
+ * Second, create a fast timing:
+ * 90ns first cycle - 3 clock access
+ * and 90ns burst cycle, plus 1 clock after the last access
+ * This is used for the internal access
+ */
+ lis r26,0x8900
+ ori r26,r26,0x0280 /* 1000 1001 0xxx 0000 0000 0010 100x xxxx
+/*
+ * We can't change settings on CS# if we currently use them.
+ * -> load a few instructions into cache and run this code from cache
+ */
+ mflr r4 /* save link register */
+ bl ..getAddr
+..getAddr:
+ mflr r3 /* get address of ..getAddr */
+ mtlr r4 /* restore link register */
+ addi r4,0,14 /* set ctr to 10; used to prefetch */
+ mtctr r4 /* 10 cache lines to fit this function
+ in cache (gives us 8x10=80 instructions) */
+..ebcloop:
+ icbt r0,r3 /* prefetch cache line for addr in r3 */
+ addi r3,r3,32 /* move to next cache line */
+ bdnz ..ebcloop /* continue for 10 cache lines */
+/*
+ * Delay to ensure all accesses to ROM are complete before changing
+ * bank 0 timings. 200usec should be enough.
+ * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
+ */
+ lis r3,0x0
+ ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
+ mtctr r3
+..spinlp:
+ bdnz ..spinlp /* spin loop */
+
+/*-----------------------------------------------------------------------
+ * Memory Bank 0 (BOOT-ROM) initialization
+ * 0xFFEF00000....0xFFFFFFF
+ * We only have to change the timing. Mapping is ok by boot-strapping
+ *----------------------------------------------------------------------- */
+
+ li r4,pb0ap /* PB0AP=Peripheral Bank 0 Access Parameters */
+ mtdcr ebccfga,r4
+
+ mr r4,r26 /* assume internal fast flash is boot flash */
+ cmpwi r24,0x2000 /* assumption true? ... */
+ beq 1f /* ...yes! */
+ mr r4,r25 /* ...no, use the slow variant */
+ mr r25,r26 /* use this for the other flash */
+1:
+ mtdcr ebccfgd,r4 /* change timing now */
+
+ li r4,pb0cr /* PB0CR=Peripheral Bank 0 Control Register */
+ mtdcr ebccfga,r4
+ mfdcr r4,ebccfgd
+ lis r3,0x0001
+ ori r3,r3,0x8000 /* allow reads and writes */
+ or r4,r4,r3
+ mtdcr ebccfgd,r4
+
+/*-----------------------------------------------------------------------
+ * Memory Bank 3 (Second-Flash) initialization
+ * 0xF0000000...0xF01FFFFF -> 2MB
+ *----------------------------------------------------------------------- */
+
+ li r4,pb3ap /* Peripheral Bank 1 Access Parameter */
+ mtdcr ebccfga,r4
+ mtdcr ebccfgd,r2 /* change timing */
+
+ li r4,pb3cr /* Peripheral Bank 1 Configuration Registers */
+ mtdcr ebccfga,r4
+
+ lis r4,0xF003
+ ori r4,r4,0x8000
+/*
+ * Consider boot configuration
+ */
+ xori r24,r24,0x2000 /* invert current bus width */
+ or r4,r4,r24
+ mtdcr ebccfgd,r4
+
+/*-----------------------------------------------------------------------
+ * Memory Bank 1 (NAND-Flash) initialization
+ * 0x77D00000...0x77DFFFFF -> 1MB
+ * - the write/read pulse to the NAND can be as short as 25ns, bus the cycle time is always 50ns
+ * - the setup time is 0ns
+ * - the hold time is 15ns
+ * ->
+ * - TWT = 0
+ * - CSN = 0
+ * - OEN = 0
+ * - WBN = 0
+ * - WBF = 0
+ * - TH = 1
+ * ----> 2 clocks per cycle = 60ns cycle (30ns active, 30ns hold)
+ *----------------------------------------------------------------------- */
+
+ li r4,pb1ap /* Peripheral Bank 1 Access Parameter */
+ mtdcr ebccfga,r4
+
+ lis r4,0x0000
+ ori r4,r4,0x0200
+ mtdcr ebccfgd,r4
+
+ li r4,pb1cr /* Peripheral Bank 1 Configuration Registers */
+ mtdcr ebccfga,r4
+
+ lis r4,0x77D1
+ ori r4,r4,0x8000
+ mtdcr ebccfgd,r4
+
+
+/* USB init (without acceleration) */
+#ifndef CONFIG_ISP1161_PRESENT
+ li r4,pb4ap /* PB4AP=Peripheral Bank 4 Access Parameters */
+ mtdcr ebccfga,r4
+ lis r4,0x0180
+ ori r4,r4,0x5940
+ mtdcr ebccfgd,r4
+#endif
+
+/*-----------------------------------------------------------------------
+ * Memory Bank 2 (ISA Access) initialization (plus memory bank 6 and 7)
+ * 0x78000000...0x7BFFFFFF -> 64 MB
+ * Wir arbeiten bei 33 MHz -> 30ns
+ *-----------------------------------------------------------------------
+
+ A7 (ppc notation) or A24 (standard notation) decides about
+ the type of access:
+ A7/A24=0 -> memory cycle
+ A7/ /A24=1 -> I/O cycle
+*/
+ li r4,pb2ap /* PB2AP=Peripheral Bank 2 Access Parameters */
+ mtdcr ebccfga,r4
+/*
+ We emulate an ISA access
+
+ 1. Address active
+ 2. wait 0 EBC clocks -> CSN=0
+ 3. set CS#
+ 4. wait 0 EBC clock -> OEN/WBN=0
+ 5. set OE#/WE#
+ 6. wait 4 clocks (ca. 90ns) and for Ready signal
+ 7. hold for 4 clocks -> TH=4
+*/
+
+#if 1
+/* faster access to isa-bus */
+ lis r4,0x0180
+ ori r4,r4,0x5940
+#else
+ lis r4,0x0100
+ ori r4,r4,0x0340
+#endif
+ mtdcr ebccfgd,r4
+
+#ifdef IDE_USES_ISA_EMULATION
+ li r25,pb5ap /* PB5AP=Peripheral Bank 5 Access Parameters */
+ mtdcr ebccfga,r25
+ mtdcr ebccfgd,r4
+#endif
+
+ li r25,pb6ap /* PB6AP=Peripheral Bank 6 Access Parameters */
+ mtdcr ebccfga,r25
+ mtdcr ebccfgd,r4
+ li r25,pb7ap /* PB7AP=Peripheral Bank 7 Access Parameters */
+ mtdcr ebccfga,r25
+ mtdcr ebccfgd,r4
+
+ li r25,pb2cr /* PB2CR=Peripheral Bank 2 Configuration Register */
+ mtdcr ebccfga,r25
+
+ lis r4,0x780B
+ ori r4,r4,0xA000
+ mtdcr ebccfgd,r4
+/*
+ * the other areas are only 1MiB in size
+ */
+ lis r4,0x7401
+ ori r4,r4,0xA000
+
+ li r25,pb6cr /* PB6CR=Peripheral Bank 6 Configuration Register */
+ mtdcr ebccfga,r25
+ lis r4,0x7401
+ ori r4,r4,0xA000
+ mtdcr ebccfgd,r4
+
+ li r25,pb7cr /* PB7CR=Peripheral Bank 7 Configuration Register */
+ mtdcr ebccfga,r25
+ lis r4,0x7411
+ ori r4,r4,0xA000
+ mtdcr ebccfgd,r4
+
+#ifndef CONFIG_ISP1161_PRESENT
+ li r25,pb4cr /* PB4CR=Peripheral Bank 4 Configuration Register */
+ mtdcr ebccfga,r25
+ lis r4,0x7421
+ ori r4,r4,0xA000
+ mtdcr ebccfgd,r4
+#endif
+#ifdef IDE_USES_ISA_EMULATION
+ li r25,pb5cr /* PB5CR=Peripheral Bank 5 Configuration Register */
+ mtdcr ebccfga,r25
+ lis r4,0x0000
+ ori r4,r4,0x0000
+ mtdcr ebccfgd,r4
+#endif
+
+/*-----------------------------------------------------------------------
+ * Memory bank 4: USB controller Philips ISP6111
+ * 0x77C00000 ... 0x77CFFFFF
+ *
+ * The chip is connected to:
+ * - CPU CS#4
+ * - CPU IRQ#2
+ * - CPU DMA 3
+ *
+ * Timing:
+ * - command to first data: 300ns. Software must ensure this timing!
+ * - Write pulse: 26ns
+ * - Read pulse: 33ns
+ * - read cycle time: 150ns
+ * - write cycle time: 140ns
+ *
+ * Note: All calculations are based on 33MHz EBC clock. One '#' or '_' is 30ns
+ *
+ * |- 300ns --|
+ * |---- 420ns ---|---- 420ns ---| cycle
+ * CS ############:###____#######:###____#######
+ * OE ############:####___#######:####___#######
+ * WE ############:####__########:####__########
+ *
+ * ----> 2 clocks RD/WR pulses: 60ns
+ * ----> CSN: 3 clock, 90ns
+ * ----> OEN: 1 clocks (read cycle)
+ * ----> WBN: 1 clocks (write cycle)
+ * ----> WBE: 2 clocks
+ * ----> TH: 7 clock, 210ns
+ * ----> TWT: 7 clocks
+ *----------------------------------------------------------------------- */
+
+#ifdef CONFIG_ISP1161_PRESENT
+
+ li r4,pb4ap /* PB4AP=Peripheral Bank 4 Access Parameters */
+ mtdcr ebccfga,r4
+
+ lis r4,0x030D
+ ori r4,r4,0x5E80
+ mtdcr ebccfgd,r4
+
+ li r4,pb4cr /* PB2CR=Peripheral Bank 4 Configuration Register */
+ mtdcr ebccfga,r4
+
+ lis r4,0x77C1
+ ori r4,r4,0xA000
+ mtdcr ebccfgd,r4
+
+#endif
+
+#ifndef IDE_USES_ISA_EMULATION
+
+/*-----------------------------------------------------------------------
+ * Memory Bank 5 used for IDE access
+ *
+ * Timings for IDE Interface
+ *
+ * SETUP / LENGTH / HOLD - cycles valid for 33.3 MHz clk -> 30ns cycle time
+ * 70 165 30 PIO-Mode 0, [ns]
+ * 3 6 1 [Cycles] ----> AP=0x040C0200
+ * 50 125 20 PIO-Mode 1, [ns]
+ * 2 5 1 [Cycles] ----> AP=0x03080200
+ * 30 100 15 PIO-Mode 2, [ns]
+ * 1 4 1 [Cycles] ----> AP=0x02040200
+ * 30 80 10 PIO-Mode 3, [ns]
+ * 1 3 1 [Cycles] ----> AP=0x01840200
+ * 25 70 10 PIO-Mode 4, [ns]
+ * 1 3 1 [Cycles] ----> AP=0x01840200
+ *
+ *----------------------------------------------------------------------- */
+
+ li r4,pb5ap
+ mtdcr ebccfga,r4
+ lis r4,0x040C
+ ori r4,r4,0x0200
+ mtdcr ebccfgd,r4
+
+ li r4,pb5cr /* PB2CR=Peripheral Bank 2 Configuration Register */
+ mtdcr ebccfga,r4
+
+ lis r4,0x7A01
+ ori r4,r4,0xA000
+ mtdcr ebccfgd,r4
+#endif
+/*
+ * External Peripheral Control Register
+ */
+ li r4,epcr
+ mtdcr ebccfga,r4
+
+ lis r4,0xB84E
+ ori r4,r4,0xF000
+ mtdcr ebccfgd,r4
+/*
+ * drive POST code
+ */
+ lis r4,0x7900
+ ori r4,r4,0x0080
+ li r3,0x0001
+ stb r3,0(r4) /* 01 -> external bus controller is initialized */
+ nop /* pass2 DCR errata #8 */
+ blr
diff --git a/board/sc3/sc3.c b/board/sc3/sc3.c
new file mode 100644
index 0000000..363a77d
--- /dev/null
+++ b/board/sc3/sc3.c
@@ -0,0 +1,781 @@
+/*
+ * (C) Copyright 2007
+ * Heiko Schocher, DENX Software Engineering, <hs@denx.de>.
+ *
+ * (C) Copyright 2003
+ * Juergen Beisert, EuroDesign embedded technologies, info@eurodsn.de
+ * Derived from walnut.c
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * $Log:$
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "sc3.h"
+#include <pci.h>
+#include <i2c.h>
+#include <malloc.h>
+
+#undef writel
+#undef writeb
+#define writeb(b,addr) ((*(volatile u8 *) (addr)) = (b))
+#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b))
+
+/* write only register to configure things in our CPLD */
+#define CPLD_CONTROL_1 0x79000102
+#define CPLD_VERSION 0x79000103
+
+#define IS_CAMERON ((*(unsigned char *)(CPLD_VERSION)== 0x32) ? 1 : 0)
+
+static struct pci_controller hose={0,};
+
+/************************************************************
+ * Standard definition
+ ************************************************************/
+
+/* CPC0_CR0 Function ISA bus
+ - GPIO0
+ - GPIO1 -> Output: NAND-Command Latch Enable
+ - GPIO2 -> Output: NAND Address Latch Enable
+ - GPIO3 -> IRQ input ISA-IRQ #5 (through CPLD)
+ - GPIO4 -> Output: NAND-Chip Enable
+ - GPIO5 -> IRQ input ISA-IRQ#7 (through CPLD)
+ - GPIO6 -> IRQ input ISA-IRQ#9 (through CPLD)
+ - GPIO7 -> IRQ input ISA-IRQ#10 (through CPLD)
+ - GPIO8 -> IRQ input ISA-IRQ#11 (through CPLD)
+ - GPIO9 -> IRQ input ISA-IRQ#12 (through CPLD)
+ - GPIO10/CS1# -> CS1# NAND ISA-CS#0
+ - GPIO11/CS2# -> CS2# ISA emulation ISA-CS#1
+ - GPIO12/CS3# -> CS3# 2nd Flash-Bank ISA-CS#2 or ISA-CS#7
+ - GPIO13/CS4# -> CS4# USB HC or ISA emulation ISA-CS#3
+ - GPIO14/CS5# -> CS5# Boosted IDE access ISA-CS#4
+ - GPIO15/CS6# -> CS6# ISA emulation ISA-CS#5
+ - GPIO16/CS7# -> CS7# ISA emulation ISA-CS#6
+ - GPIO17/IRQ0 -> GPIO, in, NAND-Ready/Busy# line ISA-IRQ#3
+ - GPIO18/IRQ1 -> IRQ input ISA-IRQ#14
+ - GPIO19/IRQ2 -> IRQ input or USB ISA-IRQ#4
+ - GPIO20/IRQ3 -> IRQ input PCI-IRQ#D
+ - GPIO21/IRQ4 -> IRQ input PCI-IRQ#C
+ - GPIO22/IRQ5 -> IRQ input PCI-IRQ#B
+ - GPIO23/IRQ6 -> IRQ input PCI-IRQ#A
+ - GPIO24 -> if GPIO output: 0=JTAG CPLD activ, 1=JTAG CPLD inactiv
+*/
+/*
+| CPLD register: io-space at offset 0x102 (write only)
+| 0
+| 1
+| 2 0=CS#4 USB CS#, 1=ISA or GP bus
+| 3
+| 4
+| 5
+| 6 1=enable faster IDE access
+| 7
+*/
+#define USB_CHIP_ENABLE 0x04
+#define IDE_BOOSTING 0x40
+
+/* --------------- USB stuff ------------------------------------- */
+#ifdef CONFIG_ISP1161_PRESENT
+/**
+ * initUsbHost- Initialize the Philips isp1161 HC part if present
+ * @cpldConfig: Pointer to value in write only CPLD register
+ *
+ * Initialize the USB host controller if present and fills the
+ * scratch register to inform the driver about used resources
+ */
+
+static void initUsbHost (unsigned char *cpldConfig)
+{
+ int i;
+ unsigned long usbBase;
+ /*
+ * Read back where init.S has located the USB chip
+ */
+ mtdcr (0x012, 0x04);
+ usbBase = mfdcr (0x013);
+ if (!(usbBase & 0x18000)) /* enabled? */
+ return;
+ usbBase &= 0xFFF00000;
+
+ /*
+ * to test for the USB controller enable using of CS#4 and DMA 3 for USB access
+ */
+ writeb (*cpldConfig | USB_CHIP_ENABLE,CPLD_CONTROL_1);
+
+ /*
+ * first check: is the controller assembled?
+ */
+ hcWriteWord (usbBase, 0x5555, HcScratch);
+ if (hcReadWord (usbBase, HcScratch) == 0x5555) {
+ hcWriteWord (usbBase, 0xAAAA, HcScratch);
+ if (hcReadWord (usbBase, HcScratch) == 0xAAAA) {
+ if ((hcReadWord (usbBase, HcChipID) & 0xFF00) != 0x6100)
+ return; /* this is not our controller */
+ /*
+ * try a software reset. This needs up to 10 seconds (see datasheet)
+ */
+ hcWriteDWord (usbBase, 0x00000001, HcCommandStatus);
+ for (i = 1000; i > 0; i--) { /* loop up to 10 seconds */
+ udelay (10);
+ if (!(hcReadDWord (usbBase, HcCommandStatus) & 0x01))
+ break;
+ }
+
+ if (!i)
+ return; /* the controller doesn't responding. Broken? */
+ /*
+ * OK. USB controller is ready. Initialize it in such way the later driver
+ * can us it (without any knowing about specific implementation)
+ */
+ hcWriteDWord (usbBase, 0x00000000, HcControl);
+ /*
+ * disable all interrupt sources. Because we
+ * don't know where we come from (hard reset, cold start, soft reset...)
+ */
+ hcWriteDWord (usbBase, 0x8000007D, HcInterruptDisable);
+ /*
+ * our current setup hardware configuration
+ * - every port power supply can switched indepently
+ * - every port can signal overcurrent
+ * - every port is "outside" and the devices are removeable
+ */
+ hcWriteDWord (usbBase, 0x32000902, HcRhDescriptorA);
+ hcWriteDWord (usbBase, 0x00060000, HcRhDescriptorB);
+ /*
+ * don't forget to switch off power supply of each port
+ * The later running driver can reenable them to find and use
+ * the (maybe) connected devices.
+ *
+ */
+ hcWriteDWord (usbBase, 0x00000200, HcRhPortStatus1);
+ hcWriteDWord (usbBase, 0x00000200, HcRhPortStatus2);
+ hcWriteWord (usbBase, 0x0428, HcHardwareConfiguration);
+ hcWriteWord (usbBase, 0x0040, HcDMAConfiguration);
+ hcWriteWord (usbBase, 0x0000, HcuPInterruptEnable);
+ hcWriteWord (usbBase, 0xA000 | (0x03 << 8) | 27, HcScratch);
+ /*
+ * controller is present and usable
+ */
+ *cpldConfig |= USB_CHIP_ENABLE;
+ }
+ }
+}
+#endif
+
+#if defined(CONFIG_START_IDE)
+int board_start_ide(void)
+{
+ if (IS_CAMERON) {
+ puts ("no IDE on cameron board.\n");
+ return 0;
+ }
+ return 1;
+}
+#endif
+
+static int sc3_cameron_init (void)
+{
+ /* Set up the Memory Controller for the CAMERON version */
+ mtebc (pb4ap, 0x01805940);
+ mtebc (pb4cr, 0x7401a000);
+ mtebc (pb5ap, 0x01805940);
+ mtebc (pb5cr, 0x7401a000);
+ mtebc (pb6ap, 0x0);
+ mtebc (pb6cr, 0x0);
+ mtebc (pb7ap, 0x0);
+ mtebc (pb7cr, 0x0);
+ return 0;
+}
+
+void sc3_read_eeprom (void)
+{
+ uchar i2c_buffer[18];
+
+ i2c_read (0x50, 0x03, 1, i2c_buffer, 9);
+ i2c_buffer[9] = 0;
+ setenv ("serial#", (char *)i2c_buffer);
+
+ /* read mac-address from eeprom */
+ i2c_read (0x50, 0x11, 1, i2c_buffer, 15);
+ i2c_buffer[17] = 0;
+ i2c_buffer[16] = i2c_buffer[14];
+ i2c_buffer[15] = i2c_buffer[13];
+ i2c_buffer[14] = ':';
+ i2c_buffer[13] = i2c_buffer[12];
+ i2c_buffer[12] = i2c_buffer[11];
+ i2c_buffer[11] = ':';
+ i2c_buffer[8] = ':';
+ i2c_buffer[5] = ':';
+ i2c_buffer[2] = ':';
+ setenv ("ethaddr", (char *)i2c_buffer);
+}
+
+int board_early_init_f (void)
+{
+ /* write only register to configure things in our CPLD */
+ unsigned char cpldConfig_1=0x00;
+
+/*-------------------------------------------------------------------------+
+| Interrupt controller setup for the SolidCard III CPU card (plus Evaluation board).
+|
+| Note: IRQ 0 UART 0, active high; level sensitive
+| IRQ 1 UART 1, active high; level sensitive
+| IRQ 2 IIC, active high; level sensitive
+| IRQ 3 Ext. master, rising edge, edge sensitive
+| IRQ 4 PCI, active high; level sensitive
+| IRQ 5 DMA Channel 0, active high; level sensitive
+| IRQ 6 DMA Channel 1, active high; level sensitive
+| IRQ 7 DMA Channel 2, active high; level sensitive
+| IRQ 8 DMA Channel 3, active high; level sensitive
+| IRQ 9 Ethernet Wakeup, active high; level sensitive
+| IRQ 10 MAL System Error (SERR), active high; level sensitive
+| IRQ 11 MAL Tx End of Buffer, active high; level sensitive
+| IRQ 12 MAL Rx End of Buffer, active high; level sensitive
+| IRQ 13 MAL Tx Descriptor Error, active high; level sensitive
+| IRQ 14 MAL Rx Descriptor Error, active high; level sensitive
+| IRQ 15 Ethernet, active high; level sensitive
+| IRQ 16 External PCI SERR, active high; level sensitive
+| IRQ 17 ECC Correctable Error, active high; level sensitive
+| IRQ 18 PCI Power Management, active high; level sensitive
+|
+| IRQ 19 (EXT IRQ7 405GPr only)
+| IRQ 20 (EXT IRQ8 405GPr only)
+| IRQ 21 (EXT IRQ9 405GPr only)
+| IRQ 22 (EXT IRQ10 405GPr only)
+| IRQ 23 (EXT IRQ11 405GPr only)
+| IRQ 24 (EXT IRQ12 405GPr only)
+|
+| IRQ 25 (EXT IRQ 0) NAND-Flash R/B# (raising edge means flash is ready)
+| IRQ 26 (EXT IRQ 1) IDE0 interrupt (x86 = IRQ14). Active high (edge sensitive)
+| IRQ 27 (EXT IRQ 2) USB controller
+| IRQ 28 (EXT IRQ 3) INT D, VGA; active low; level sensitive
+| IRQ 29 (EXT IRQ 4) INT C, Ethernet; active low; level sensitive
+| IRQ 30 (EXT IRQ 5) INT B, PC104+ SLOT; active low; level sensitive
+| IRQ 31 (EXT IRQ 6) INT A, PC104+ SLOT; active low; level sensitive
+|
+| Direct Memory Access Controller Signal Polarities
+| DRQ0 active high (like ISA)
+| ACK0 active low (like ISA)
+| EOT0 active high (like ISA)
+| DRQ1 active high (like ISA)
+| ACK1 active low (like ISA)
+| EOT1 active high (like ISA)
+| DRQ2 active high (like ISA)
+| ACK2 active low (like ISA)
+| EOT2 active high (like ISA)
+| DRQ3 active high (like ISA)
+| ACK3 active low (like ISA)
+| EOT3 active high (like ISA)
+|
++-------------------------------------------------------------------------*/
+
+ writeb (cpldConfig_1, CPLD_CONTROL_1); /* disable everything in CPLD */
+
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
+
+ if (IS_CAMERON) {
+ sc3_cameron_init();
+ mtdcr (0x0B6, 0x18000000);
+ mtdcr (uicpr, 0xFFFFFFF0);
+ mtdcr (uictr, 0x10001030);
+ } else {
+ mtdcr (0x0B6, 0x0000000);
+ mtdcr (uicpr, 0xFFFFFFE0);
+ mtdcr (uictr, 0x10000020);
+ }
+ mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ /* setup other implementation specific details */
+ mtdcr (ecr, 0x60606000);
+
+ mtdcr (cntrl1, 0x000042C0);
+
+ if (IS_CAMERON) {
+ mtdcr (cntrl0, 0x01380000);
+ /* Setup the GPIOs */
+ writel (0x08008000, 0xEF600700); /* Output states */
+ writel (0x00000000, 0xEF600718); /* Open Drain control */
+ writel (0x68098000, 0xEF600704); /* Output control */
+ } else {
+ mtdcr (cntrl0,0x00080000);
+ /* Setup the GPIOs */
+ writel (0x08000000, 0xEF600700); /* Output states */
+ writel (0x14000000, 0xEF600718); /* Open Drain control */
+ writel (0x7C000000, 0xEF600704); /* Output control */
+ }
+
+ /* Code decompression disabled */
+ mtdcr (kiar, kconf);
+ mtdcr (kidr, 0x2B);
+
+ /* CPC0_ER: enable sleep mode of (currently) unused components */
+ /* CPC0_FR: force unused components into sleep mode */
+ mtdcr (cpmer, 0x3F800000);
+ mtdcr (cpmfr, 0x14000000);
+
+ /* set PLB priority */
+ mtdcr (0x87, 0x08000000);
+
+ /* --------------- DMA stuff ------------------------------------- */
+ mtdcr (0x126, 0x49200000);
+
+#ifndef IDE_USES_ISA_EMULATION
+ cpldConfig_1 |= IDE_BOOSTING; /* enable faster IDE */
+ /* cpldConfig |= 0x01; */ /* enable 8.33MHz output, if *not* present on your baseboard */
+ writeb (cpldConfig_1, CPLD_CONTROL_1);
+#endif
+
+#ifdef CONFIG_ISP1161_PRESENT
+ initUsbHost (&cpldConfig_1);
+ writeb (cpldConfig_1, CPLD_CONTROL_1);
+#endif
+ /* FIXME: for what must we do this */
+ *(unsigned long *)0x79000080 = 0x0001;
+ return(0);
+}
+
+int misc_init_r (void)
+{
+ char *s1;
+ int i, xilinx_val;
+ volatile char *xilinx_adr;
+ xilinx_adr = (char *)0x79000102;
+
+ *xilinx_adr = 0x00;
+
+/* customer settings ***************************************** */
+/*
+ s1 = getenv ("function");
+ if (s1) {
+ if (!strcmp (s1, "Rosho")) {
+ printf ("function 'Rosho' activated\n");
+ *xilinx_adr = 0x40;
+ }
+ else {
+ printf (">>>>>>>>>> function %s not recognized\n",s1);
+ }
+ }
+*/
+
+/* individual settings ***************************************** */
+ if ((s1 = getenv ("xilinx"))) {
+ i=0;
+ xilinx_val = 0;
+ while (i < 3 && s1[i]) {
+ if (s1[i] >= '0' && s1[i] <= '9')
+ xilinx_val = (xilinx_val << 4) + s1[i] - '0';
+ else
+ if (s1[i] >= 'A' && s1[i] <= 'F')
+ xilinx_val = (xilinx_val << 4) + s1[i] - 'A' + 10;
+ else
+ if (s1[i] >= 'a' && s1[i] <= 'f')
+ xilinx_val = (xilinx_val << 4) + s1[i] - 'a' + 10;
+ else {
+ xilinx_val = -1;
+ break;
+ }
+ i++;
+ }
+ if (xilinx_val >= 0 && xilinx_val <=255 && i < 3) {
+ printf ("Xilinx: set to %s\n", s1);
+ *xilinx_adr = (unsigned char) xilinx_val;
+ } else
+ printf ("Xilinx: rejected value %s\n", s1);
+ }
+ return 0;
+}
+
+/* -------------------------------------------------------------------------
+ * printCSConfig
+ *
+ * Print some informations about chips select configurations
+ * Only used while debugging.
+ *
+ * Params:
+ * - No. of CS pin
+ * - AP of this CS
+ * - CR of this CS
+ *
+ * Returns
+ * nothing
+ ------------------------------------------------------------------------- */
+
+#ifdef SC3_DEBUGOUT
+static void printCSConfig(int reg,unsigned long ap,unsigned long cr)
+{
+ const char *bsize[4] = {"8","16","32","?"};
+ const unsigned char banks[8] = {1, 2, 4, 8, 16, 32, 64, 128};
+ const char *bankaccess[4] = {"disabled", "RO", "WO", "RW"};
+
+#define CYCLE 30 /* time of one clock (based on 33MHz) */
+
+ printf("\nCS#%d",reg);
+ if (!(cr & 0x00018000))
+ puts(" unused");
+ else {
+ if (((cr&0xFFF00000U) & ((banks[(cr & 0x000E0000) >> 17]-1) << 20)))
+ puts(" Address is not multiple of bank size!");
+
+ printf("\n -%s bit device",
+ bsize[(cr & 0x00006000) >> 13]);
+ printf(" at 0x%08lX", cr & 0xFFF00000U);
+ printf(" size: %u MB", banks[(cr & 0x000E0000) >> 17]);
+ printf(" rights: %s", bankaccess[(cr & 0x00018000) >> 15]);
+ if (ap & 0x80000000) {
+ printf("\n -Burst device (%luns/%luns)",
+ (((ap & 0x7C000000) >> 26) + 1) * CYCLE,
+ (((ap & 0x03800000) >> 23) + 1) * CYCLE);
+ } else {
+ printf("\n -Non burst device, active cycle %luns",
+ (((ap & 0x7F800000) >> 23) + 1) * CYCLE);
+ printf("\n -Address setup %luns",
+ ((ap & 0xC0000) >> 18) * CYCLE);
+ printf("\n -CS active to RD %luns/WR %luns",
+ ((ap & 0x30000) >> 16) * CYCLE,
+ ((ap & 0xC000) >> 14) * CYCLE);
+ printf("\n -WR to CS inactive %luns",
+ ((ap & 0x3000) >> 12) * CYCLE);
+ printf("\n -Hold after access %luns",
+ ((ap & 0xE00) >> 9) * CYCLE);
+ printf("\n -Ready is %sabled",
+ ap & 0x100 ? "en" : "dis");
+ }
+ }
+}
+#endif
+
+#ifdef SC3_DEBUGOUT
+
+static unsigned int ap[] = {pb0ap, pb1ap, pb2ap, pb3ap, pb4ap,
+ pb5ap, pb6ap, pb7ap};
+static unsigned int cr[] = {pb0cr, pb1cr, pb2cr, pb3cr, pb4cr,
+ pb5cr, pb6cr, pb7cr};
+
+static int show_reg (int nr)
+{
+ unsigned long ul1, ul2;
+
+ mtdcr (ebccfga, ap[nr]);
+ ul1 = mfdcr (ebccfgd);
+ mtdcr (ebccfga, cr[nr]);
+ ul2 = mfdcr(ebccfgd);
+ printCSConfig(nr, ul1, ul2);
+ return 0;
+}
+#endif
+
+int checkboard (void)
+{
+#ifdef SC3_DEBUGOUT
+ unsigned long ul1;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ show_reg (i);
+ }
+
+ mtdcr (ebccfga, epcr);
+ ul1 = mfdcr (ebccfgd);
+
+ puts ("\nGeneral configuration:\n");
+
+ if (ul1 & 0x80000000)
+ printf(" -External Bus is always driven\n");
+
+ if (ul1 & 0x400000)
+ printf(" -CS signals are always driven\n");
+
+ if (ul1 & 0x20000)
+ printf(" -PowerDown after %lu clocks\n",
+ (ul1 & 0x1F000) >> 7);
+
+ switch (ul1 & 0xC0000)
+ {
+ case 0xC0000:
+ printf(" -No external master present\n");
+ break;
+ case 0x00000:
+ printf(" -8 bit external master present\n");
+ break;
+ case 0x40000:
+ printf(" -16 bit external master present\n");
+ break;
+ case 0x80000:
+ printf(" -32 bit external master present\n");
+ break;
+ }
+
+ switch (ul1 & 0x300000)
+ {
+ case 0x300000:
+ printf(" -Prefetch: Illegal setting!\n");
+ break;
+ case 0x000000:
+ printf(" -1 doubleword prefetch\n");
+ break;
+ case 0x100000:
+ printf(" -2 doublewords prefetch\n");
+ break;
+ case 0x200000:
+ printf(" -4 doublewords prefetch\n");
+ break;
+ }
+ putc ('\n');
+#endif
+ printf("Board: SolidCard III %s %s version.\n",
+ (IS_CAMERON ? "Cameron" : "Eurodesign"), CONFIG_SC3_VERSION);
+ return 0;
+}
+
+static int printSDRAMConfig(char reg, unsigned long cr)
+{
+ const int bisize[8]={4, 8, 16, 32, 64, 128, 256, 0};
+#ifdef SC3_DEBUGOUT
+ const char *basize[8]=
+ {"4", "8", "16", "32", "64", "128", "256", "Reserved"};
+
+ printf("SDRAM bank %d",reg);
+
+ if (!(cr & 0x01))
+ puts(" disabled\n");
+ else {
+ printf(" at 0x%08lX, size %s MB",cr & 0xFFC00000,basize[(cr&0xE0000)>>17]);
+ printf(" mode %lu\n",((cr & 0xE000)>>13)+1);
+ }
+#endif
+
+ if (cr & 0x01)
+ return(bisize[(cr & 0xE0000) >> 17]);
+
+ return 0;
+}
+
+#ifdef SC3_DEBUGOUT
+static unsigned int mbcf[] = {mem_mb0cf, mem_mb1cf, mem_mb2cf, mem_mb3cf};
+#endif
+
+long int initdram (int board_type)
+{
+ unsigned int mems=0;
+ unsigned long ul1;
+
+#ifdef SC3_DEBUGOUT
+ unsigned long ul2;
+ int i;
+
+ puts("\nSDRAM configuration:\n");
+
+ mtdcr (memcfga, mem_mcopt1);
+ ul1 = mfdcr(memcfgd);
+
+ if (!(ul1 & 0x80000000)) {
+ puts(" Controller disabled\n");
+ return 0;
+ }
+ for (i = 0; i < 4; i++) {
+ mtdcr (memcfga, mbcf[i]);
+ ul1 = mfdcr (memcfgd);
+ mems += printSDRAMConfig (i, ul1);
+ }
+
+ mtdcr (memcfga, mem_sdtr1);
+ ul1 = mfdcr(memcfgd);
+
+ printf ("Timing:\n -CAS latency %lu\n", ((ul1 & 0x1800000) >> 23)+1);
+ printf (" -Precharge %lu (PTA) \n", ((ul1 & 0xC0000) >> 18) + 1);
+ printf (" -R/W to Precharge %lu (CTP)\n", ((ul1 & 0x30000) >> 16) + 1);
+ printf (" -Leadoff %lu\n", ((ul1 & 0xC000) >> 14) + 1);
+ printf (" -CAS to RAS %lu\n", ((ul1 & 0x1C) >> 2) + 4);
+ printf (" -RAS to CAS %lu\n", ((ul1 & 0x3) + 1));
+ puts ("Misc:\n");
+ mtdcr (memcfga, mem_rtr);
+ ul1 = mfdcr(memcfgd);
+ printf (" -Refresh rate: %luns\n", (ul1 >> 16) * 7);
+
+ mtdcr(memcfga,mem_pmit);
+ ul2=mfdcr(memcfgd);
+
+ mtdcr(memcfga,mem_mcopt1);
+ ul1=mfdcr(memcfgd);
+
+ if (ul1 & 0x20000000)
+ printf(" -Power Down after: %luns\n",
+ ((ul2 & 0xFFC00000) >> 22) * 7);
+ else
+ puts(" -Power Down disabled\n");
+
+ if (ul1 & 0x40000000)
+ printf(" -Self refresh feature active\n");
+ else
+ puts(" -Self refresh disabled\n");
+
+ if (ul1 & 0x10000000)
+ puts(" -ECC enabled\n");
+ else
+ puts(" -ECC disabled\n");
+
+ if (ul1 & 0x8000000)
+ puts(" -Using registered SDRAM\n");
+
+ if (!(ul1 & 0x6000000))
+ puts(" -Using 32 bit data width\n");
+ else
+ puts(" -Illegal data width!\n");
+
+ if (ul1 & 0x400000)
+ puts(" -ECC drivers inactive\n");
+ else
+ puts(" -ECC drivers active\n");
+
+ if (ul1 & 0x200000)
+ puts(" -Memory lines always active outputs\n");
+ else
+ puts(" -Memory lines only at write cycles active outputs\n");
+
+ mtdcr (memcfga, mem_status);
+ ul1 = mfdcr (memcfgd);
+ if (ul1 & 0x80000000)
+ puts(" -SDRAM Controller ready\n");
+ else
+ puts(" -SDRAM Controller not ready\n");
+
+ if (ul1 & 0x4000000)
+ puts(" -SDRAM in self refresh mode!\n");
+
+ return (mems * 1024 * 1024);
+#else
+ mtdcr (memcfga, mem_mb0cf);
+ ul1 = mfdcr (memcfgd);
+ mems = printSDRAMConfig (0, ul1);
+
+ mtdcr (memcfga, mem_mb1cf);
+ ul1 = mfdcr (memcfgd);
+ mems += printSDRAMConfig (1, ul1);
+
+ mtdcr (memcfga, mem_mb2cf);
+ ul1 = mfdcr(memcfgd);
+ mems += printSDRAMConfig (2, ul1);
+
+ mtdcr (memcfga, mem_mb3cf);
+ ul1 = mfdcr(memcfgd);
+ mems += printSDRAMConfig (3, ul1);
+
+ return (mems * 1024 * 1024);
+#endif
+}
+
+static void pci_solidcard3_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
+{
+/*-------------------------------------------------------------------------+
+ | ,-. ,-. ,-. ,-. ,-.
+ | INTD# ----|B|-----|P|-. ,-|P|-. ,-| |-. ,-|G|
+ | |R| |C| \ / |C| \ / |E| \ / |r|
+ | INTC# ----|I|-----|1|-. `/---|1|-. `/---|t|-. `/---|a|
+ | |D| |0| \/ |0| \/ |h| \/ |f|
+ | INTB# ----|G|-----|4|-./`----|4|-./`----|e|-./`----|i|
+ | |E| |+| /\ |+| /\ |r| /\ |k|
+ | INTA# ----| |-----| |- `----| |- `----| |- `----| |
+ | `-' `-' `-' `-' `-'
+ | Slot 0 10 11 12 13
+ | REQ# 0 1 2 *
+ | GNT# 0 1 2 *
+ +-------------------------------------------------------------------------*/
+ unsigned char int_line = 0xff;
+
+ switch (PCI_DEV(dev)) {
+ case 10:
+ int_line = 31; /* INT A */
+ POST_OUT(0x42);
+ break;
+
+ case 11:
+ int_line = 30; /* INT B */
+ POST_OUT(0x43);
+ break;
+
+ case 12:
+ int_line = 29; /* INT C */
+ POST_OUT(0x44);
+ break;
+
+ case 13:
+ int_line = 28; /* INT D */
+ POST_OUT(0x45);
+ break;
+ }
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
+}
+
+extern void pci_405gp_init(struct pci_controller *hose);
+extern void pci_405gp_fixup_irq(struct pci_controller *hose, pci_dev_t dev);
+extern void pci_405gp_setup_bridge(struct pci_controller *hose, pci_dev_t dev,struct pci_config_table *entry);
+/*
+ * The following table is used when there is a special need to setup a PCI device.
+ * For every PCI device found in this table is called the given init function with given
+ * parameters. So never let all IDs at PCI_ANY_ID. In this case any found device gets the same
+ * parameters!
+ *
+*/
+static struct pci_config_table pci_solidcard3_config_table[] =
+{
+/* Host to PCI Bridge device (405GP) */
+ {
+ vendor: 0x1014,
+ device: 0x0156,
+ class: PCI_CLASS_BRIDGE_HOST,
+ bus: 0,
+ dev: 0,
+ func: 0,
+ config_device: pci_405gp_setup_bridge
+ },
+ { }
+};
+
+/*-------------------------------------------------------------------------+
+ | pci_init_board (Called from pci_init() in drivers/pci.c)
+ |
+ | Init the PCI part of the SolidCard III
+ |
+ | Params:
+ * - Pointer to current PCI hose
+ * - Current Device
+ *
+ * Returns
+ * nothing
+ +-------------------------------------------------------------------------*/
+
+void pci_init_board(void)
+{
+ POST_OUT(0x41);
+/*
+ * we want the ptrs to RAM not flash (ie don't use init list)
+ */
+ hose.fixup_irq = pci_solidcard3_fixup_irq;
+ hose.config_table = pci_solidcard3_config_table;
+ pci_405gp_init(&hose);
+}
diff --git a/board/sc3/sc3.h b/board/sc3/sc3.h
new file mode 100644
index 0000000..cf920f9
--- /dev/null
+++ b/board/sc3/sc3.h
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/**
+ * hcWriteWord - write a 16 bit value into the USB controller
+ * @base: base address to access the chip registers
+ * @value: 16 bit value to write into register @offset
+ * @offset: register to write the @value into
+ *
+ */
+static void inline hcWriteWord (unsigned long base, unsigned int value,
+ unsigned int offset)
+{
+ out_le16 ((volatile u16*)(base + 2), offset | 0x80);
+ out_le16 ((volatile u16*)base, value);
+}
+
+/**
+ * hcWriteDWord - write a 32 bit value into the USB controller
+ * @base: base address to access the chip registers
+ * @value: 32 bit value to write into register @offset
+ * @offset: register to write the @value into
+ *
+ */
+
+static void inline hcWriteDWord (unsigned long base, unsigned long value,
+ unsigned int offset)
+{
+ out_le16 ((volatile u16*)(base + 2), offset | 0x80);
+ out_le16 ((volatile u16*)base, value);
+ out_le16 ((volatile u16*)base, value >> 16);
+}
+
+/**
+ * hcReadWord - read a 16 bit value from the USB controller
+ * @base: base address to access the chip registers
+ * @offset: register to read from
+ *
+ * Returns the readed register value
+ */
+
+static unsigned int inline hcReadWord (unsigned long base, unsigned int offset)
+{
+ out_le16 ((volatile u16*)(base + 2), offset);
+ return (in_le16 ((volatile u16*)base));
+}
+
+/**
+ * hcReadDWord - read a 32 bit value from the USB controller
+ * @base: base address to access the chip registers
+ * @offset: register to read from
+ *
+ * Returns the readed register value
+ */
+
+static unsigned long inline hcReadDWord (unsigned long base, unsigned int offset)
+{
+ unsigned long val, val16;
+
+ out_le16 ((volatile u16*)(base + 2), offset);
+ val = in_le16((volatile u16*)base);
+ val16 = in_le16((volatile u16*)base);
+ return (val | (val16 << 16));
+}
+
+/* control and status registers isp1161 */
+#define HcRevision 0x00
+#define HcControl 0x01
+#define HcCommandStatus 0x02
+#define HcInterruptStatus 0x03
+#define HcInterruptEnable 0x04
+#define HcInterruptDisable 0x05
+#define HcFmInterval 0x0D
+#define HcFmRemaining 0x0E
+#define HcFmNumber 0x0F
+#define HcLSThreshold 0x11
+#define HcRhDescriptorA 0x12
+#define HcRhDescriptorB 0x13
+#define HcRhStatus 0x14
+#define HcRhPortStatus1 0x15
+#define HcRhPortStatus2 0x16
+
+#define HcHardwareConfiguration 0x20
+#define HcDMAConfiguration 0x21
+#define HcTransferCounter 0x22
+#define HcuPInterrupt 0x24
+#define HcuPInterruptEnable 0x25
+#define HcChipID 0x27
+#define HcScratch 0x28
+#define HcSoftwareReset 0x29
+#define HcITLBufferLength 0x2A
+#define HcATLBufferLength 0x2B
+#define HcBufferStatus 0x2C
+#define HcReadBackITL0Length 0x2D
+#define HcReadBackITL1Length 0x2E
+#define HcITLBufferPort 0x40
+#define HcATLBufferPort 0x41
diff --git a/board/sc3/sc3nand.c b/board/sc3/sc3nand.c
new file mode 100644
index 0000000..7daa877
--- /dev/null
+++ b/board/sc3/sc3nand.c
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2007
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <nand.h>
+#include <asm/processor.h>
+
+#define readb(addr) *(volatile u_char *)(addr)
+#define readl(addr) *(volatile u_long *)(addr)
+#define writeb(d,addr) *(volatile u_char *)(addr) = (d)
+
+#define SC3_NAND_ALE 29 /* GPIO PIN 3 */
+#define SC3_NAND_CLE 30 /* GPIO PIN 2 */
+#define SC3_NAND_CE 27 /* GPIO PIN 5 */
+
+static void *sc3_io_base;
+static void *sc3_control_base = (void *)0xEF600700;
+
+static void sc3_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ set_bit (SC3_NAND_CLE, sc3_control_base);
+ break;
+ case NAND_CTL_CLRCLE:
+ clear_bit (SC3_NAND_CLE, sc3_control_base);
+ break;
+
+ case NAND_CTL_SETALE:
+ set_bit (SC3_NAND_ALE, sc3_control_base);
+ break;
+ case NAND_CTL_CLRALE:
+ clear_bit (SC3_NAND_ALE, sc3_control_base);
+ break;
+
+ case NAND_CTL_SETNCE:
+ set_bit (SC3_NAND_CE, sc3_control_base);
+ break;
+ case NAND_CTL_CLRNCE:
+ clear_bit (SC3_NAND_CE, sc3_control_base);
+ break;
+ }
+}
+
+static int sc3_nand_dev_ready(struct mtd_info *mtd)
+{
+ if (!(readl(sc3_control_base + 0x1C) & 0x4000))
+ return 0;
+ return 1;
+}
+
+static void sc3_select_chip(struct mtd_info *mtd, int chip)
+{
+ clear_bit (SC3_NAND_CE, sc3_control_base);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->eccmode = NAND_ECC_SOFT;
+
+ sc3_io_base = (void *) CFG_NAND_BASE;
+ /* Set address of NAND IO lines (Using Linear Data Access Region) */
+ nand->IO_ADDR_R = (void __iomem *) sc3_io_base;
+ nand->IO_ADDR_W = (void __iomem *) sc3_io_base;
+ /* Reference hardware control function */
+ nand->hwcontrol = sc3_nand_hwcontrol;
+ nand->dev_ready = sc3_nand_dev_ready;
+ nand->select_chip = sc3_select_chip;
+ return 0;
+}
+#endif
diff --git a/board/sc3/u-boot.lds b/board/sc3/u-boot.lds
new file mode 100644
index 0000000..dc255d2
--- /dev/null
+++ b/board/sc3/u-boot.lds
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/sc3/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/spc1920/Makefile b/board/spc1920/Makefile
index 424ab1c..0c48c3a 100644
--- a/board/spc1920/Makefile
+++ b/board/spc1920/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o
+COBJS = $(BOARD).o hpi.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/spc1920/hpi.c b/board/spc1920/hpi.c
new file mode 100644
index 0000000..3c36f79
--- /dev/null
+++ b/board/spc1920/hpi.c
@@ -0,0 +1,603 @@
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Host Port Interface (HPI)
+ */
+
+/* debug levels:
+ * 0 : errors
+ * 1 : usefull info
+ * 2 : lots of info
+ * 3 : noisy
+ */
+
+#define DEBUG 0
+
+#include <config.h>
+#include <common.h>
+#include <mpc8xx.h>
+
+#include "pld.h"
+#include "hpi.h"
+
+#define _NOT_USED_ 0xFFFFFFFF
+
+/* original table:
+ * - inserted loops to achieve long CS low and high Periods (~217ns)
+ * - move cs high 2/4 to the right
+ */
+const uint dsp_table_slow[] =
+{
+ /* single read (offset 0x00 in upm ram) */
+ 0x8fffdc04, 0x0fffdc84, 0x0fffdc84, 0x0fffdc00,
+ 0x3fffdc04, 0xffffdc84, 0xffffdc84, 0xffffdc05,
+
+ /* burst read (offset 0x08 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* single write (offset 0x18 in upm ram) */
+ 0x8fffd004, 0x0fffd084, 0x0fffd084, 0x3fffd000,
+ 0xffffd084, 0xffffd084, 0xffffd005, _NOT_USED_,
+
+ /* burst write (offset 0x20 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /* refresh (offset 0x30 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /* exception (offset 0x3C in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* dsp hpi upm ram table
+ * works fine for noninc access, failes on incremental.
+ * - removed first word
+ */
+const uint dsp_table_fast[] =
+{
+ /* single read (offset 0x00 in upm ram) */
+ 0x8fffdc04, 0x0fffdc04, 0x0fffdc00, 0x3fffdc04,
+ 0xffffdc05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* burst read (offset 0x08 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* single write (offset 0x18 in upm ram) */
+ 0x8fffd004, 0x0fffd004, 0x3fffd000, 0xffffd005,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* burst write (offset 0x20 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /* refresh (offset 0x30 in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /* exception (offset 0x3C in upm ram) */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+
+#ifdef CONFIG_SPC1920_HPI_TEST
+#undef HPI_TEST_OSZI
+
+#define HPI_TEST_CHUNKSIZE 0x1000
+#define HPI_TEST_PATTERN 0x00000000
+#define HPI_TEST_START 0x0
+#define HPI_TEST_END 0x30000
+
+#define TINY_AUTOINC_DATA_SIZE 16 /* 32bit words */
+#define TINY_AUTOINC_BASE_ADDR 0x0
+
+static int hpi_activate(void);
+static void hpi_inactivate(void);
+static void dsp_reset(void);
+
+static int hpi_write_inc(u32 addr, u32 *data, u32 count);
+static int hpi_read_inc(u32 addr, u32 *buf, u32 count);
+static int hpi_write_noinc(u32 addr, u32 data);
+static u32 hpi_read_noinc(u32 addr);
+
+int hpi_test(void);
+static int hpi_write_addr_test(u32 addr);
+static int hpi_read_write_test(u32 addr, u32 data);
+static int hpi_tiny_autoinc_test(void);
+#endif /* CONFIG_SPC1920_HPI_TEST */
+
+
+/* init the host port interface on UPMA */
+int hpi_init(void)
+{
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immr->im_memctl;
+ volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+
+ upmconfig(UPMA, (uint *)dsp_table_slow, sizeof(dsp_table_slow)/sizeof(uint));
+ udelay(100);
+
+ memctl->memc_mamr = CFG_MAMR;
+ memctl->memc_or3 = CFG_OR3;
+ memctl->memc_br3 = CFG_BR3;
+
+ /* reset dsp */
+ dsp_reset();
+
+ /* activate hpi switch*/
+ pld->dsp_hpi_on = 0x1;
+
+ udelay(100);
+
+ return 0;
+}
+
+#ifdef CONFIG_SPC1920_HPI_TEST
+/* activate the Host Port interface */
+static int hpi_activate(void)
+{
+ volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+
+ /* turn on hpi */
+ pld->dsp_hpi_on = 0x1;
+
+ udelay(5);
+
+ /* turn on the power EN_DSP_POWER high*/
+ /* currently always on TBD */
+
+ /* setup hpi control register */
+ HPI_HPIC_1 = (u16) 0x0008;
+ HPI_HPIC_2 = (u16) 0x0008;
+
+ udelay(100);
+
+ return 0;
+}
+
+/* turn off the host port interface */
+static void hpi_inactivate(void)
+{
+ volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+
+ /* deactivate hpi */
+ pld->dsp_hpi_on = 0x0;
+
+ /* reset the dsp */
+ /* pld->dsp_reset = 0x0; */
+
+ /* turn off the power EN_DSP_POWER# high*/
+ /* currently always on TBD */
+
+}
+
+/* reset the DSP */
+static void dsp_reset(void)
+{
+ volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE;
+ pld->dsp_reset = 0x1;
+ pld->dsp_hpi_on = 0x0;
+
+ udelay(300000);
+
+ pld->dsp_reset = 0x0;
+ pld->dsp_hpi_on = 0x1;
+}
+
+
+/* write using autoinc (count is number of 32bit words) */
+static int hpi_write_inc(u32 addr, u32 *data, u32 count)
+{
+ int i;
+ u16 addr1, addr2;
+
+ addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+ addr2 = (u16) (addr & 0xffff);
+
+ /* write address */
+ HPI_HPIA_1 = addr1;
+ HPI_HPIA_2 = addr2;
+
+ debugX(4, "writing from data=0x%x to 0x%x\n", data, (data+count));
+
+ for(i=0; i<count; i++) {
+ HPI_HPID_INC_1 = (u16) ((data[i] >> 16) & 0xffff);
+ HPI_HPID_INC_2 = (u16) (data[i] & 0xffff);
+ debugX(4, "hpi_write_inc: data1=0x%x, data2=0x%x\n",
+ (u16) ((data[i] >> 16) & 0xffff),
+ (u16) (data[i] & 0xffff));
+ }
+#if 0
+ while(data_ptr < (u16*) (data + count)) {
+ HPI_HPID_INC_1 = *(data_ptr++);
+ HPI_HPID_INC_2 = *(data_ptr++);
+ }
+#endif
+
+ /* return number of bytes written */
+ return count;
+}
+
+/*
+ * read using autoinc (count is number of 32bit words)
+ */
+static int hpi_read_inc(u32 addr, u32 *buf, u32 count)
+{
+ int i;
+ u16 addr1, addr2, data1, data2;
+
+ addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+ addr2 = (u16) (addr & 0xffff);
+
+ /* write address */
+ HPI_HPIA_1 = addr1;
+ HPI_HPIA_2 = addr2;
+
+ for(i=0; i<count; i++) {
+ data1 = HPI_HPID_INC_1;
+ data2 = HPI_HPID_INC_2;
+ debugX(4, "hpi_read_inc: data1=0x%x, data2=0x%x\n", data1, data2);
+ buf[i] = (((u32) data1) << 16) | (data2 & 0xffff);
+ }
+
+#if 0
+ while(buf_ptr < (u16*) (buf + count)) {
+ *(buf_ptr++) = HPI_HPID_INC_1;
+ *(buf_ptr++) = HPI_HPID_INC_2;
+ }
+#endif
+
+ /* return number of bytes read */
+ return count;
+}
+
+
+/* write to non- auto inc regs */
+static int hpi_write_noinc(u32 addr, u32 data)
+{
+
+ u16 addr1, addr2, data1, data2;
+
+ addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+ addr2 = (u16) (addr & 0xffff);
+
+ /* printf("hpi_write_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */
+
+ HPI_HPIA_1 = addr1;
+ HPI_HPIA_2 = addr2;
+
+ data1 = (u16) ((data >> 16) & 0xffff);
+ data2 = (u16) (data & 0xffff);
+
+ /* printf("hpi_write_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */
+
+ HPI_HPID_NOINC_1 = data1;
+ HPI_HPID_NOINC_2 = data2;
+
+ return 0;
+}
+
+/* read from non- auto inc regs */
+static u32 hpi_read_noinc(u32 addr)
+{
+ u16 addr1, addr2, data1, data2;
+ u32 ret;
+
+ addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+ addr2 = (u16) (addr & 0xffff);
+
+ HPI_HPIA_1 = addr1;
+ HPI_HPIA_2 = addr2;
+
+ /* printf("hpi_read_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */
+
+ data1 = HPI_HPID_NOINC_1;
+ data2 = HPI_HPID_NOINC_2;
+
+ /* printf("hpi_read_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */
+
+ ret = (((u32) data1) << 16) | (data2 & 0xffff);
+ return ret;
+
+}
+
+/*
+ * Host Port Interface Tests
+ */
+
+#ifndef HPI_TEST_OSZI
+/* main test function */
+int hpi_test(void)
+{
+ int err = 0;
+ u32 i, ii, pattern, tmp;
+
+ pattern = HPI_TEST_PATTERN;
+
+ u32 test_data[HPI_TEST_CHUNKSIZE];
+ u32 read_data[HPI_TEST_CHUNKSIZE];
+
+ debugX(2, "hpi_test: activating hpi...");
+ hpi_activate();
+ debugX(2, "OK.\n");
+
+#if 0
+ /* Dump the first 1024 bytes
+ *
+ */
+ for(i=0; i<1024; i+=4) {
+ if(i%16==0)
+ printf("\n0x%08x: ", i);
+ printf("0x%08x ", hpi_read_noinc(i));
+ }
+#endif
+
+ /* HPIA read-write test
+ *
+ */
+ debugX(1, "hpi_test: starting HPIA read-write tests...\n");
+ err |= hpi_write_addr_test(0xdeadc0de);
+ err |= hpi_write_addr_test(0xbeefd00d);
+ err |= hpi_write_addr_test(0xabcd1234);
+ err |= hpi_write_addr_test(0xaaaaaaaa);
+ if(err) {
+ debugX(1, "hpi_test: HPIA read-write tests: *** FAILED ***\n");
+ return -1;
+ }
+ debugX(1, "hpi_test: HPIA read-write tests: OK\n");
+
+
+ /* read write test using nonincremental data regs
+ *
+ */
+ debugX(1, "hpi_test: starting nonincremental tests...\n");
+ for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) {
+ err |= hpi_read_write_test(i, pattern);
+
+ /* stolen from cmd_mem.c */
+ if(pattern & 0x80000000) {
+ pattern = -pattern; /* complement & increment */
+ } else {
+ pattern = ~pattern;
+ }
+ err |= hpi_read_write_test(i, pattern);
+
+ if(err) {
+ debugX(1, "hpi_test: nonincremental tests *** FAILED ***\n");
+ return -1;
+ }
+ }
+ debugX(1, "hpi_test: nonincremental test OK\n");
+
+ /* read write a chunk of data using nonincremental data regs
+ *
+ */
+ debugX(1, "hpi_test: starting nonincremental chunk tests...\n");
+ pattern = HPI_TEST_PATTERN;
+ for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) {
+ hpi_write_noinc(i, pattern);
+
+ /* stolen from cmd_mem.c */
+ if(pattern & 0x80000000) {
+ pattern = -pattern; /* complement & increment */
+ } else {
+ pattern = ~pattern;
+ }
+ }
+ pattern = HPI_TEST_PATTERN;
+ for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) {
+ tmp = hpi_read_noinc(i);
+
+ if(tmp != pattern) {
+ debugX(1, "hpi_test: noninc chunk test *** FAILED *** @ 0x%x, written=0x%x, read=0x%x\n", i, pattern, tmp);
+ err = -1;
+ }
+ /* stolen from cmd_mem.c */
+ if(pattern & 0x80000000) {
+ pattern = -pattern; /* complement & increment */
+ } else {
+ pattern = ~pattern;
+ }
+ }
+ if(err)
+ return -1;
+ debugX(1, "hpi_test: nonincremental chunk test OK\n");
+
+
+#ifdef DO_TINY_TEST
+ /* small verbose test using autoinc and nonautoinc to compare
+ *
+ */
+ debugX(1, "hpi_test: tiny_autoinc_test...\n");
+ hpi_tiny_autoinc_test();
+ debugX(1, "hpi_test: tiny_autoinc_test done\n");
+#endif /* DO_TINY_TEST */
+
+
+ /* $%& write a chunk of data using the autoincremental regs
+ *
+ */
+ debugX(1, "hpi_test: starting autoinc test %d chunks with 0x%x bytes...\n",
+ ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE),
+ HPI_TEST_CHUNKSIZE);
+
+ for(i=HPI_TEST_START;
+ i < ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE);
+ i++) {
+ /* generate the pattern data */
+ debugX(3, "generating pattern data: ");
+ for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) {
+ debugX(3, "0x%x ", pattern);
+
+ test_data[ii] = pattern;
+ read_data[ii] = 0x0; /* zero to be sure */
+
+ /* stolen from cmd_mem.c */
+ if(pattern & 0x80000000) {
+ pattern = -pattern; /* complement & increment */
+ } else {
+ pattern = ~pattern;
+ }
+ }
+ debugX(3, "done\n");
+
+ debugX(2, "Writing autoinc data @ 0x%x\n", i);
+ hpi_write_inc(i, test_data, HPI_TEST_CHUNKSIZE);
+
+ debugX(2, "Reading autoinc data @ 0x%x\n", i);
+ hpi_read_inc(i, read_data, HPI_TEST_CHUNKSIZE);
+
+ /* compare */
+ for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) {
+ debugX(3, "hpi_test_autoinc: @ 0x%x, written=0x%x, read=0x%x", i+ii, test_data[ii], read_data[ii]);
+ if(read_data[ii] != test_data[ii]) {
+ debugX(0, "hpi_test: autoinc test @ 0x%x, written=0x%x, read=0x%x *** FAILED ***\n", i+ii, test_data[ii], read_data[ii]);
+ return -1;
+ }
+ }
+ }
+ debugX(1, "hpi_test: autoinc test OK\n");
+
+ return 0;
+}
+#else /* HPI_TEST_OSZI */
+int hpi_test(void)
+{
+ int i;
+ u32 read_data[TINY_AUTOINC_DATA_SIZE];
+
+ unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = {
+ 0x11112222, 0x33334444, 0x55556666, 0x77778888,
+ 0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111,
+ 0x00010002, 0x00030004, 0x00050006, 0x00070008,
+ 0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001
+ };
+
+ debugX(0, "hpi_test: activating hpi...");
+ hpi_activate();
+ debugX(0, "OK.\n");
+
+ while(1) {
+ led9(1);
+ debugX(0, " writing to autoinc...\n");
+ hpi_write_inc(TINY_AUTOINC_BASE_ADDR,
+ dummy_data, TINY_AUTOINC_DATA_SIZE);
+
+ debugX(0, " reading from autoinc...\n");
+ hpi_read_inc(TINY_AUTOINC_BASE_ADDR,
+ read_data, TINY_AUTOINC_DATA_SIZE);
+
+ for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) {
+ debugX(0, " written=0x%x, read(inc)=0x%x\n",
+ dummy_data[i], read_data[i]);
+ }
+ led9(0);
+ udelay(2000000);
+ }
+ return 0;
+}
+#endif
+
+/* test if Host Port Address Register can be written correctly */
+static int hpi_write_addr_test(u32 addr)
+{
+ u32 read_back;
+ /* write address */
+ HPI_HPIA_1 = ((u16) (addr >> 16)); /* First HW is most significant */
+ HPI_HPIA_2 = ((u16) addr);
+
+ read_back = (((u32) HPI_HPIA_1)<<16) | ((u32) HPI_HPIA_2);
+
+ if(read_back == addr) {
+ debugX(2, " hpi_write_addr_test OK: written=0x%x, read=0x%x\n",
+ addr, read_back);
+ return 0;
+ } else {
+ debugX(0, " hpi_write_addr_test *** FAILED ***: written=0x%x, read=0x%x\n",
+ addr, read_back);
+ return -1;
+ }
+
+ return 0;
+}
+
+/* test if a simple read/write sequence succeeds */
+static int hpi_read_write_test(u32 addr, u32 data)
+{
+ u32 read_back;
+
+ hpi_write_noinc(addr, data);
+ read_back = hpi_read_noinc(addr);
+
+ if(read_back == data) {
+ debugX(2, " hpi_read_write_test: OK, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back);
+ return 0;
+ } else {
+ debugX(0, " hpi_read_write_test: *** FAILED ***, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int hpi_tiny_autoinc_test(void)
+{
+ int i;
+ u32 read_data[TINY_AUTOINC_DATA_SIZE];
+ u32 read_data_noinc[TINY_AUTOINC_DATA_SIZE];
+
+ unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = {
+ 0x11112222, 0x33334444, 0x55556666, 0x77778888,
+ 0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111,
+ 0x00010002, 0x00030004, 0x00050006, 0x00070008,
+ 0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001
+ };
+
+ printf(" writing to autoinc...\n");
+ hpi_write_inc(TINY_AUTOINC_BASE_ADDR, dummy_data, TINY_AUTOINC_DATA_SIZE);
+
+ printf(" reading from autoinc...\n");
+ hpi_read_inc(TINY_AUTOINC_BASE_ADDR, read_data, TINY_AUTOINC_DATA_SIZE);
+
+ printf(" reading from noinc for comparison...\n");
+ for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++)
+ read_data_noinc[i] = hpi_read_noinc(TINY_AUTOINC_BASE_ADDR+i*4);
+
+ for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) {
+ printf(" written=0x%x, read(inc)=0x%x, read(noinc)=0x%x\n",
+ dummy_data[i], read_data[i], read_data_noinc[i]);
+ }
+ return 0;
+}
+
+#endif /* CONFIG_SPC1920_HPI_TEST */
diff --git a/board/spc1920/hpi.h b/board/spc1920/hpi.h
new file mode 100644
index 0000000..4503873
--- /dev/null
+++ b/board/spc1920/hpi.h
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+int hpi_init(void);
+
+#ifdef CONFIG_SPC1920_HPI_TEST
+int hpi_test(void);
+#endif
diff --git a/board/spc1920/pld.h b/board/spc1920/pld.h
index 3254f82..5beb71b 100644
--- a/board/spc1920/pld.h
+++ b/board/spc1920/pld.h
@@ -5,8 +5,8 @@ typedef struct spc1920_pld {
uchar com1_en;
uchar dsp_reset;
uchar dsp_hpi_on;
+ uchar superv_mode;
uchar codec_dsp_power_en;
- uchar clk2_en;
uchar clk3_select;
uchar clk4_select;
} spc1920_pld_t;
diff --git a/board/spc1920/spc1920.c b/board/spc1920/spc1920.c
index 028f4c6..1f5dcb5 100644
--- a/board/spc1920/spc1920.c
+++ b/board/spc1920/spc1920.c
@@ -27,9 +27,9 @@
#include <common.h>
#include <mpc8xx.h>
#include "pld.h"
+#include "hpi.h"
#define _NOT_USED_ 0xFFFFFFFF
-/* #define debug(fmt,args...) printf (fmt ,##args) */
static long int dram_size (long int, long int *, long int);
@@ -172,10 +172,12 @@ long int initdram (int board_type)
memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
udelay (1000);
+ /* initalize the DSP Host Port Interface */
+ hpi_init();
- /* PLD Setup */
- memctl->memc_or5 = CFG_OR5_PRELIM;
- memctl->memc_br5 = CFG_BR5_PRELIM;
+ /* FRAM Setup */
+ memctl->memc_or4 = CFG_OR4;
+ memctl->memc_br4 = CFG_BR4;
udelay(1000);
return (size_b0);
@@ -207,13 +209,31 @@ int board_early_init_f(void)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ /* Set Go/NoGo led (PA15) to color red */
+ immap->im_ioport.iop_papar &= ~0x1;
+ immap->im_ioport.iop_paodr &= ~0x1;
+ immap->im_ioport.iop_padir |= 0x1;
+ immap->im_ioport.iop_padat |= 0x1;
+#if 0
/* Turn on LED PD9 */
immap->im_ioport.iop_pdpar &= ~(0x0040);
immap->im_ioport.iop_pddir |= 0x0040;
immap->im_ioport.iop_pddat |= 0x0040;
+#endif
+
+ /*
+ * Enable console on SMC1. This requires turning on
+ * the com2_en signal and SMC1_DISABLE
+ */
+
+ /* SMC1_DISABLE: PB17 */
+ immap->im_cpm.cp_pbodr &= ~0x4000;
+ immap->im_cpm.cp_pbpar &= ~0x4000;
+ immap->im_cpm.cp_pbdir |= 0x4000;
+ immap->im_cpm.cp_pbdat &= ~0x4000;
- /* Enable PD10 (COM2_EN) */
+ /* COM2_EN: PD10 */
immap->im_ioport.iop_pdpar &= ~0x0020;
immap->im_ioport.iop_pddir &= ~0x4000;
immap->im_ioport.iop_pddir |= 0x0020;
@@ -228,6 +248,14 @@ int board_early_init_f(void)
return 0;
}
+int last_stage_init(void)
+{
+#ifdef CONFIG_SPC1920_HPI_TEST
+ printf("CMB1920 Host Port Interface Test: %s\n",
+ hpi_test() ? "Failed!" : "OK");
+#endif
+ return 0;
+}
int checkboard (void)
{
diff --git a/board/tqm5200/cam5200_flash.c b/board/tqm5200/cam5200_flash.c
index 8c3f62e..b3f095d 100644
--- a/board/tqm5200/cam5200_flash.c
+++ b/board/tqm5200/cam5200_flash.c
@@ -25,7 +25,7 @@
#include <mpc5xxx.h>
#include <asm/processor.h>
-#ifdef CONFIG_CAM5200
+#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH)
#if 0
#define DEBUGF(x...) printf(x)
@@ -783,4 +783,4 @@ unsigned long flash_init(void)
return total_b;
}
-#endif /* ifdef CONFIG_CAM5200 */
+#endif /* if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) */
diff --git a/board/uc101/Makefile b/board/uc101/Makefile
new file mode 100644
index 0000000..ddfd2ef
--- /dev/null
+++ b/board/uc101/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/uc101/config.mk b/board/uc101/config.mk
new file mode 100644
index 0000000..51e8e84c
--- /dev/null
+++ b/board/uc101/config.mk
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# INKA 4X0 board:
+#
+# Valid values for TEXT_BASE are:
+#
+# 0xFFE00000 boot high
+#
+# 0x00100000 boot from RAM (for testing only)
+#
+
+ifndef TEXT_BASE
+## Standard: boot high
+TEXT_BASE = 0xFFF00000
+## For testing: boot from RAM
+#TEXT_BASE = 0x00100000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/uc101/u-boot.lds b/board/uc101/u-boot.lds
new file mode 100644
index 0000000..123a14c
--- /dev/null
+++ b/board/uc101/u-boot.lds
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc5xxx/start.o (.text)
+ cpu/mpc5xxx/traps.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/cache.o (.text)
+ lib_ppc/time.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.ppcenv)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c
new file mode 100644
index 0000000..b803585
--- /dev/null
+++ b/board/uc101/uc101.c
@@ -0,0 +1,371 @@
+/*
+ * (C) Copyright 2006
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2004
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+#include <malloc.h>
+
+/* some SIMPLE GPIO Pins */
+#define GPIO_USB_8 (31-12)
+#define GPIO_USB_7 (31-13)
+#define GPIO_USB_6 (31-14)
+#define GPIO_USB_0 (31-15)
+#define GPIO_PSC3_7 (31-18)
+#define GPIO_PSC3_6 (31-19)
+#define GPIO_PSC3_1 (31-22)
+#define GPIO_PSC3_0 (31-23)
+
+/* some simple Interrupt GPIO Pins */
+#define GPIO_PSC3_8 2
+#define GPIO_USB1_9 3
+
+#define GPT_OUT_0 0x00000027
+#define GPT_OUT_1 0x00000037
+#define GPT_DISABLE 0x00000000 /* GPT pin disabled */
+
+#define GP_SIMP_ENABLE_O(n, v) {pgpio->simple_dvo |= (v << n); \
+ pgpio->simple_ddr |= (1 << n); \
+ pgpio->simple_gpioe |= (1 << n); \
+ }
+
+#define GP_SIMP_ENABLE_I(n) { pgpio->simple_ddr |= ~(1 << n); \
+ pgpio->simple_gpioe |= (1 << n); \
+ }
+
+#define GP_SIMP_SET_O(n, v) (pgpio->simple_dvo = v ? \
+ (pgpio->simple_dvo | (1 << n)) : \
+ (pgpio->simple_dvo & ~(1 << n)) )
+
+#define GP_SIMP_GET_O(n) ((pgpio->simple_dvo >> n) & 1)
+#define GP_SIMP_GET_I(n) ((pgpio->simple_ival >> n) & 1)
+
+#define GP_SINT_SET_O(n, v) (pgpio->sint_dvo = v ? \
+ (pgpio->sint_dvo | (1 << n)) : \
+ (pgpio->sint_dvo & ~(1 << n)) )
+
+#define GP_SINT_ENABLE_O(n, v) {pgpio->sint_ode &= ~(1 << n); \
+ pgpio->sint_ddr |= (1 << n); \
+ GP_SINT_SET_O(n, v); \
+ pgpio->sint_gpioe |= (1 << n); \
+ }
+
+#define GP_SINT_ENABLE_I(n) { pgpio->sint_ddr |= ~(1 << n); \
+ pgpio->sint_gpioe |= (1 << n); \
+ }
+
+#define GP_SINT_GET_O(n) ((pgpio->sint_ival >> n) & 1)
+#define GP_SINT_GET_I(n) ((pgpio-ntt_ival >> n) & 1)
+
+#define GP_TIMER_ENABLE_O(n, v) ( \
+ ((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr = v ? \
+ GPT_OUT_1 : \
+ GPT_OUT_0 )
+
+#define GP_TIMER_SET_O(n, v) GP_TIMER_ENABLE_O(n, v)
+
+#define GP_TIMER_GET_O(n, v) ( \
+ (((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr & 0x10) >> 4)
+
+#define GP_TIMER_GET_I(n, v) ( \
+ (((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->sr & 0x100) >> 8)
+
+#ifndef CFG_RAMBOOT
+static void sdram_start (int hi_addr)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set mode register: extended mode */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+ __asm__ volatile ("sync");
+
+ /* set mode register: reset DLL */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+ __asm__ volatile ("sync");
+#endif
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+ __asm__ volatile ("sync");
+
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+ __asm__ volatile ("sync");
+}
+#endif
+
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * is something else than 0x00000000.
+ */
+
+long int initdram (int board_type)
+{
+ ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* setup SDRAM chip selects */
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */
+ __asm__ volatile ("sync");
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set tap delay */
+ *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+ __asm__ volatile ("sync");
+#endif
+
+ /* find RAM size using SDRAM CS0 only */
+ sdram_start(0);
+ test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ sdram_start(1);
+ test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20)) {
+ dramsize = 0;
+ }
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
+ __builtin_ffs(dramsize >> 20) - 1;
+ } else {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+ }
+
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+#else /* CFG_RAMBOOT */
+
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ if (dramsize >= 0x13) {
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ } else {
+ dramsize = 0;
+ }
+
+ /* retrieve size of memory connected to SDRAM CS1 */
+ dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+ if (dramsize2 >= 0x13) {
+ dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+ } else {
+ dramsize2 = 0;
+ }
+
+#endif /* CFG_RAMBOOT */
+
+/* return dramsize + dramsize2; */
+ return dramsize;
+}
+
+int checkboard (void)
+{
+ puts ("Board: MAN UC101\n");
+ return 0;
+}
+
+static void init_ports (void)
+{
+ volatile struct mpc5xxx_gpio *pgpio =
+ (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+
+ GP_SIMP_ENABLE_I(GPIO_USB_8); /* HEX Bit 3 */
+ GP_SIMP_ENABLE_I(GPIO_USB_7); /* HEX Bit 2 */
+ GP_SIMP_ENABLE_I(GPIO_USB_6); /* HEX Bit 1 */
+ GP_SIMP_ENABLE_I(GPIO_USB_0); /* HEX Bit 0 */
+ GP_SIMP_ENABLE_I(GPIO_PSC3_0); /* Switch Menue A */
+ GP_SIMP_ENABLE_I(GPIO_PSC3_1); /* Switch Menue B */
+ GP_SIMP_ENABLE_I(GPIO_PSC3_6); /* Switch Cold_Warm */
+ GP_SIMP_ENABLE_I(GPIO_PSC3_7); /* Switch Restart */
+ GP_SINT_ENABLE_O(GPIO_PSC3_8, 0); /* LED H2 */
+ GP_SINT_ENABLE_O(GPIO_USB1_9, 0); /* LED H3 */
+ GP_TIMER_ENABLE_O(4, 0); /* LED H4 */
+ GP_TIMER_ENABLE_O(5, 0); /* LED H5 */
+ GP_TIMER_ENABLE_O(3, 0); /* LED HB */
+ GP_TIMER_ENABLE_O(1, 0); /* RES_COLDSTART */
+}
+
+#ifdef CONFIG_PREBOOT
+
+static uchar kbd_magic_prefix[] = "key_magic";
+static uchar kbd_command_prefix[] = "key_cmd";
+
+struct kbd_data_t {
+ char s1;
+};
+
+struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
+{
+ volatile struct mpc5xxx_gpio *pgpio =
+ (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+
+ kbd_data->s1 = GP_SIMP_GET_I(GPIO_USB_8) << 3 | \
+ GP_SIMP_GET_I(GPIO_USB_7) << 2 | \
+ GP_SIMP_GET_I(GPIO_USB_6) << 1 | \
+ GP_SIMP_GET_I(GPIO_USB_0) << 0;
+ return kbd_data;
+}
+
+static int compare_magic (const struct kbd_data_t *kbd_data, uchar *str)
+{
+ char s1 = str[0];
+
+ if (s1 >= '0' && s1 <= '9')
+ s1 -= '0';
+ else if (s1 >= 'a' && s1 <= 'f')
+ s1 = s1 - 'a' + 10;
+ else if (s1 >= 'A' && s1 <= 'F')
+ s1 = s1 - 'A' + 10;
+ else
+ return -1;
+
+ if (s1 != kbd_data->s1) return -1;
+ return 0;
+}
+
+static uchar *key_match (const struct kbd_data_t *kbd_data)
+{
+ uchar magic[sizeof (kbd_magic_prefix) + 1];
+ uchar *suffix;
+ uchar *kbd_magic_keys;
+
+ /*
+ * The following string defines the characters that can be appended
+ * to "key_magic" to form the names of environment variables that
+ * hold "magic" key codes, i. e. such key codes that can cause
+ * pre-boot actions. If the string is empty (""), then only
+ * "key_magic" is checked (old behaviour); the string "125" causes
+ * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
+ */
+ if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
+ kbd_magic_keys = "";
+
+ /* loop over all magic keys;
+ * use '\0' suffix in case of empty string
+ */
+ for (suffix = kbd_magic_keys; *suffix ||
+ suffix == kbd_magic_keys; ++suffix) {
+ sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
+
+ if (compare_magic(kbd_data, getenv(magic)) == 0) {
+ uchar cmd_name[sizeof (kbd_command_prefix) + 1];
+ char *cmd;
+
+ sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
+ cmd = getenv (cmd_name);
+
+ return (cmd);
+ }
+ }
+
+ return (NULL);
+}
+
+#endif /* CONFIG_PREBOOT */
+
+int misc_init_r (void)
+{
+ /* Init the I/O ports */
+ init_ports ();
+
+#ifdef CONFIG_PREBOOT
+ struct kbd_data_t kbd_data;
+ /* Decode keys */
+ uchar *str = strdup (key_match (get_keys (&kbd_data)));
+ /* Set or delete definition */
+ setenv ("preboot", str);
+ free (str);
+#endif /* CONFIG_PREBOOT */
+ return 0;
+}
+
+int board_early_init_r (void)
+{
+ *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+ *(vu_long *)MPC5XXX_BOOTCS_START =
+ *(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE);
+ *(vu_long *)MPC5XXX_BOOTCS_STOP =
+ *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
+ /* Interbus enable it here ?? */
+ *(vu_long *)MPC5XXX_GPT6_ENABLE = GPT_OUT_1;
+ return 0;
+}
+#ifdef CONFIG_PCI
+static struct pci_controller hose;
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+ pci_mpc5xxx_init(&hose);
+}
+#endif
+
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+ /* Trigger HW Watchdog with TIMER_0 */
+ *(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_1;
+ *(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_0;
+}
+#endif
diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
index dede996..ace4aa2 100644
--- a/board/v38b/v38b.c
+++ b/board/v38b/v38b.c
@@ -191,16 +191,8 @@ int checkboard (void)
return 0;
}
-
-int board_early_init_r(void)
+int board_early_init_f(void)
{
- /*
- * Now, when we are in RAM, enable flash write access for the
- * detection process. Note that CS_BOOT cannot be cleared when
- * executing in flash.
- */
- *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
-
#ifdef CONFIG_HW_WATCHDOG
/*
* Enable and configure the direction (output) of PSC3_9 - watchdog
@@ -210,6 +202,17 @@ int board_early_init_r(void)
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9;
#endif /* CONFIG_HW_WATCHDOG */
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+ /*
+ * Now, when we are in RAM, enable flash write access for the
+ * detection process. Note that CS_BOOT cannot be cleared when
+ * executing in flash.
+ */
+ *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
/*
* Enable GPIO_WKUP_7 to "read the status of the actual power
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index 182e2ab..e68f16f 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -83,7 +83,7 @@ U_BOOT_CMD(
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
U_BOOT_CMD(
- reset, CFG_MAXARGS, 1, do_reset,
+ reset, 1, 0, do_reset,
"reset - Perform RESET of the CPU\n",
NULL
);
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index b7e00b3..7e65821 100644
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -123,7 +123,7 @@ void cpu_init_f (void)
#endif
#if defined(CFG_CS7_START) && defined(CFG_CS7_SIZE)
- *(vu_long *)MPC5XXX_CS7_START = START_REG(CFG_CS5_START);
+ *(vu_long *)MPC5XXX_CS7_START = START_REG(CFG_CS7_START);
*(vu_long *)MPC5XXX_CS7_STOP = STOP_REG(CFG_CS7_START, CFG_CS7_SIZE);
addecr |= (1 << 27);
#endif
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 37fe3e7..71c1bfa 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -376,7 +376,7 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
#if (DEBUG & 0x2)
if (fec->xcv_type != SEVENWIRE)
- mpc5xxx_fec_phydump ();
+ mpc5xxx_fec_phydump (dev->name);
#endif
/*
@@ -575,7 +575,7 @@ static void mpc5xxx_fec_halt(struct eth_device *dev)
#if (DEBUG & 0x2)
if (fec->xcv_type != SEVENWIRE)
- mpc5xxx_fec_phydump ();
+ mpc5xxx_fec_phydump (dev->name);
#endif
/*
@@ -882,7 +882,8 @@ int mpc5xxx_fec_initialize(bd_t * bis)
defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \
defined(CONFIG_MCC200) || defined(CONFIG_O2DNT) || \
defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \
- defined(CONFIG_TQM5200) || defined(CONFIG_V38B)
+ defined(CONFIG_TQM5200) || defined(CONFIG_V38B) || \
+ defined(CONFIG_UC101)
# ifndef CONFIG_FEC_10MBIT
fec->xcv_type = MII100;
# else
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index 8ae584f..9d0fc6b 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -227,8 +227,17 @@ static int smc_init (void)
sp->smc_smcm = 0;
sp->smc_smce = 0xff;
-#ifdef CFG_SPC1920_SMC1_CLK4 /* clock source is PLD */
- *((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0xff;
+#ifdef CFG_SPC1920_SMC1_CLK4
+ /* clock source is PLD */
+
+ /* set freq to 19200 Baud */
+ *((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0x3;
+ /* configure clk4 as input */
+ im->im_ioport.iop_pdpar |= 0x800;
+ im->im_ioport.iop_pddir &= ~0x800;
+
+ cp->cp_simode = 0x0000;
+ cp->cp_simode |= 0x7000;
#else
/* Set up the baud rate generator */
smc_setbrg ();
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 9b711e2..7134355 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -380,7 +380,7 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
}
-#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405))
+#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SOLIDCARD3))
/*
*As is these functs get called out of flash Not a horrible
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
index 6130cd2..d6c4be5 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -26,10 +26,9 @@
#include <common.h>
#include <pci.h>
-#include "440spe_pcie.h"
+#if defined(CONFIG_440SPE) && defined(CONFIG_PCI)
-#if defined(CONFIG_440SPE)
-#if defined(CONFIG_PCI)
+#include "440spe_pcie.h"
enum {
PTYPE_ENDPOINT = 0x0,
@@ -958,5 +957,4 @@ int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
return 0;
}
-#endif /* CONFIG_PCI */
-#endif /* CONFIG_440SPE */
+#endif /* CONFIG_440SPE && CONFIG_PCI */
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 427ea94..4f55583 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -166,6 +166,11 @@ struct eth_device *emac0_dev = NULL;
#define LAST_EMAC_NUM 1
#endif
+/* normal boards start with EMAC0 */
+#if !defined(CONFIG_EMAC_NR_START)
+#define CONFIG_EMAC_NR_START 0
+#endif
+
/*-----------------------------------------------------------------------------+
* Prototypes and externals.
*-----------------------------------------------------------------------------*/
@@ -601,6 +606,26 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
/* end Vitesse/Cicada errata */
}
#endif
+
+#if defined(CONFIG_ET1011C_PHY)
+ /*
+ * Agere ET1011c PHY needs to have an extended register whacked
+ * for RGMII mode.
+ */
+ if (((devnum == 2) || (devnum ==3)) && (4 == ethgroup)) {
+ miiphy_read (dev->name, reg, 0x16, &reg_short);
+ reg_short &= ~(0x7);
+ reg_short |= 0x6; /* RGMII DLL Delay*/
+ miiphy_write (dev->name, reg, 0x16, reg_short);
+
+ miiphy_read (dev->name, reg, 0x17, &reg_short);
+ reg_short &= ~(0x40);
+ miiphy_write (dev->name, reg, 0x17, reg_short);
+
+ miiphy_write(dev->name, reg, 0x1c, 0x74f0);
+ }
+#endif
+
#endif
/* Start/Restart autonegotiation */
phy_setup_aneg (dev->name, reg);
@@ -643,8 +668,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
if (hw_p->print_speed) {
hw_p->print_speed = 0;
- printf ("ENET Speed is %d Mbps - %s duplex connection\n",
- (int) speed, (duplex == HALF) ? "HALF" : "FULL");
+ printf ("ENET Speed is %d Mbps - %s duplex connection (EMAC%d)\n",
+ (int) speed, (duplex == HALF) ? "HALF" : "FULL",
+ hw_p->devnum);
}
#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
@@ -1493,6 +1519,8 @@ int ppc_4xx_eth_initialize (bd_t * bis)
struct eth_device *dev;
int eth_num = 0;
EMAC_4XX_HW_PST hw = NULL;
+ u8 ethaddr[4 + CONFIG_EMAC_NR_START][6];
+ u32 hw_addr[4];
#if defined(CONFIG_440GX)
unsigned long pfc1;
@@ -1502,59 +1530,69 @@ int ppc_4xx_eth_initialize (bd_t * bis)
pfc1 |= 0x01200000;
mtsdr (sdr_pfc1, pfc1);
#endif
- /* set phy num and mode */
- bis->bi_phynum[0] = CONFIG_PHY_ADDR;
- bis->bi_phymode[0] = 0;
-#if defined(CONFIG_PHY1_ADDR)
- bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
- bis->bi_phymode[1] = 0;
-#endif
-#if defined(CONFIG_440GX)
- bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
- bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
- bis->bi_phymode[2] = 2;
- bis->bi_phymode[3] = 2;
-
- ppc_4xx_eth_setup_bridge(0, bis);
-#endif
+ /* first clear all mac-addresses */
+ for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++)
+ memcpy(ethaddr[eth_num], "\0\0\0\0\0\0", 6);
for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) {
-
- /* See if we can actually bring up the interface, otherwise, skip it */
switch (eth_num) {
default: /* fall through */
case 0:
- if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) {
- bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
- continue;
- }
+ memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
+ bis->bi_enetaddr, 6);
+ hw_addr[eth_num] = 0x0;
break;
#ifdef CONFIG_HAS_ETH1
case 1:
- if (memcmp (bis->bi_enet1addr, "\0\0\0\0\0\0", 6) == 0) {
- bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
- continue;
- }
+ memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
+ bis->bi_enet1addr, 6);
+ hw_addr[eth_num] = 0x100;
break;
#endif
#ifdef CONFIG_HAS_ETH2
case 2:
- if (memcmp (bis->bi_enet2addr, "\0\0\0\0\0\0", 6) == 0) {
- bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
- continue;
- }
+ memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
+ bis->bi_enet2addr, 6);
+ hw_addr[eth_num] = 0x400;
break;
#endif
#ifdef CONFIG_HAS_ETH3
case 3:
- if (memcmp (bis->bi_enet3addr, "\0\0\0\0\0\0", 6) == 0) {
- bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
- continue;
- }
+ memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
+ bis->bi_enet3addr, 6);
+ hw_addr[eth_num] = 0x600;
break;
#endif
}
+ }
+
+ /* set phy num and mode */
+ bis->bi_phynum[0] = CONFIG_PHY_ADDR;
+ bis->bi_phymode[0] = 0;
+
+#if defined(CONFIG_PHY1_ADDR)
+ bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
+ bis->bi_phymode[1] = 0;
+#endif
+#if defined(CONFIG_440GX)
+ bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
+ bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
+ bis->bi_phymode[2] = 2;
+ bis->bi_phymode[3] = 2;
+
+ ppc_4xx_eth_setup_bridge(0, bis);
+#endif
+
+ for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) {
+ /*
+ * See if we can actually bring up the interface,
+ * otherwise, skip it
+ */
+ if (memcmp (ethaddr[eth_num], "\0\0\0\0\0\0", 6) == 0) {
+ bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
+ continue;
+ }
/* Allocate device structure */
dev = (struct eth_device *) malloc (sizeof (*dev));
@@ -1576,36 +1614,12 @@ int ppc_4xx_eth_initialize (bd_t * bis)
}
memset(hw, 0, sizeof(*hw));
- switch (eth_num) {
- default: /* fall through */
- case 0:
- hw->hw_addr = 0;
- memcpy (dev->enetaddr, bis->bi_enetaddr, 6);
- break;
-#ifdef CONFIG_HAS_ETH1
- case 1:
- hw->hw_addr = 0x100;
- memcpy (dev->enetaddr, bis->bi_enet1addr, 6);
- break;
-#endif
-#ifdef CONFIG_HAS_ETH2
- case 2:
- hw->hw_addr = 0x400;
- memcpy (dev->enetaddr, bis->bi_enet2addr, 6);
- break;
-#endif
-#ifdef CONFIG_HAS_ETH3
- case 3:
- hw->hw_addr = 0x600;
- memcpy (dev->enetaddr, bis->bi_enet3addr, 6);
- break;
-#endif
- }
-
+ hw->hw_addr = hw_addr[eth_num];
+ memcpy (dev->enetaddr, ethaddr[eth_num], 6);
hw->devnum = eth_num;
hw->print_speed = 1;
- sprintf (dev->name, "ppc_4xx_eth%d", eth_num);
+ sprintf (dev->name, "ppc_4xx_eth%d", eth_num - CONFIG_EMAC_NR_START);
dev->priv = (void *) hw;
dev->init = ppc_4xx_eth_init;
dev->halt = ppc_4xx_eth_halt;
@@ -1663,7 +1677,6 @@ int ppc_4xx_eth_initialize (bd_t * bis)
return (1);
}
-
#if !defined(CONFIG_NET_MULTI)
void eth_halt (void) {
if (emac0_dev) {
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 9c5c910..57a7e8d 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -332,24 +332,44 @@ int checkcpu (void)
strcpy(addstr, "No Security/Kasumi support");
break;
- case PVR_440SP_RA:
- puts("SP Rev. A");
+ case PVR_440SP_6_RAB:
+ puts("SP Rev. A/B");
+ strcpy(addstr, "RAID 6 support");
break;
- case PVR_440SP_RB:
- puts("SP Rev. B");
+ case PVR_440SP_RAB:
+ puts("SP Rev. A/B");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+ case PVR_440SP_6_RC:
+ puts("SP Rev. C");
+ strcpy(addstr, "RAID 6 support");
break;
case PVR_440SP_RC:
puts("SP Rev. C");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+ case PVR_440SPe_6_RA:
+ puts("SPe Rev. A");
+ strcpy(addstr, "RAID 6 support");
break;
case PVR_440SPe_RA:
puts("SPe Rev. A");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+ case PVR_440SPe_6_RB:
+ puts("SPe Rev. B");
+ strcpy(addstr, "RAID 6 support");
break;
case PVR_440SPe_RB:
puts("SPe Rev. B");
+ strcpy(addstr, "No RAID 6 support");
break;
default:
@@ -419,7 +439,7 @@ int ppc440spe_revB() {
unsigned int pvr;
pvr = get_pvr();
- if (pvr == PVR_440SPe_RB)
+ if ((pvr == PVR_440SPe_6_RB) || (pvr == PVR_440SPe_RB))
return 1;
else
return 0;
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 4b746b0..ae24591 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -31,9 +31,6 @@
DECLARE_GLOBAL_DATA_PTR;
#endif
-
-#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-
#ifdef CFG_INIT_DCACHE_CS
# if (CFG_INIT_DCACHE_CS == 0)
# define PBxAP pb0ap
@@ -222,6 +219,10 @@ void set_chip_gpio_configuration(gpio_param_s (*gpio_tab)[GPIO_GROUP_MAX][GPIO_M
void
cpu_init_f (void)
{
+#if defined(CONFIG_WATCHDOG)
+ unsigned long val;
+#endif
+
#if defined(CONFIG_405EP)
/*
* GPIO0 setup (select GPIO or alternate function)
@@ -312,9 +313,11 @@ cpu_init_f (void)
mtebc(pb7cr, CFG_EBC_PB7CR);
#endif
-#if defined(CONFIG_WATCHDOG)
- unsigned long val;
+#if defined (CFG_EBC_CFG)
+ mtebc(epcr, CFG_EBC_CFG);
+#endif
+#if defined(CONFIG_WATCHDOG)
val = mfspr(tcr);
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
val |= 0xb8000000; /* generate system reset after 1.34 seconds */
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index f06038e..d520cd3 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2005-2006
+ * (C) Copyright 2005-2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2006
@@ -32,9 +32,9 @@
#include <asm/processor.h>
#include "sdram.h"
-
#ifdef CONFIG_SDRAM_BANK0
+#ifndef CONFIG_440
#ifndef CFG_SDRAM_TABLE
sdram_conf_t mb0cf[] = {
@@ -50,9 +50,6 @@ sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;
#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
-
-#ifndef CONFIG_440
-
#ifdef CFG_SDRAM_CASL
static ulong ns2clks(ulong ns)
{
@@ -221,6 +218,26 @@ void sdram_init(void)
#else /* CONFIG_440 */
+/*
+ * Define some default values. Those can be overwritten in the
+ * board config file.
+ */
+
+#ifndef CFG_SDRAM_TABLE
+sdram_conf_t mb0cf[] = {
+ {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4) */
+ {(64 << 20), 12, 0x00082001} /* 64MB mode 2, 12x9(4) */
+};
+#else
+sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;
+#endif
+
+#ifndef CFG_SDRAM0_TR0
+#define CFG_SDRAM0_TR0 0x41094012
+#endif
+
+#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
+
#define NUM_TRIES 64
#define NUM_READS 10
@@ -295,7 +312,6 @@ static void sdram_tr1_set(int ram_address, int* tr1_value)
*tr1_value = (first_good + last_bad) / 2;
}
-
#ifdef CONFIG_SDRAM_ECC
static void ecc_init(ulong start, ulong size)
{
@@ -351,7 +367,8 @@ long int initdram(int board_type)
int i;
int tr1_bank1;
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440SP)
/*
* Soft-reset SDRAM controller.
*/
@@ -378,9 +395,9 @@ long int initdram(int board_type)
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
mtsdram(mem_b0cr, mb0cf[i].reg);
- mtsdram(mem_tr0, 0x41094012);
+ mtsdram(mem_tr0, CFG_SDRAM0_TR0);
mtsdram(mem_tr1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
- mtsdram(mem_rtr, 0x7e000000); /* Interval 15.20µs @ 133MHz PLB*/
+ mtsdram(mem_rtr, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */
mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/
udelay(400); /* Delay 200 usecs (min) */
diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c
index a834cb4..696f9a4 100644
--- a/drivers/cfi_flash.c
+++ b/drivers/cfi_flash.c
@@ -2,7 +2,7 @@
* (C) Copyright 2002-2004
* Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
*
- * Copyright (C) 2003, 2006 Arabella Software Ltd.
+ * Copyright (C) 2003 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
*
* Copyright (C) 2004
@@ -35,13 +35,10 @@
/* #define DEBUG */
#include <common.h>
-
-#ifdef CFG_FLASH_CFI_DRIVER
-
-#include <watchdog.h>
#include <asm/processor.h>
#include <asm/byteorder.h>
#include <environment.h>
+#ifdef CFG_FLASH_CFI_DRIVER
/*
* This file implements a Common Flash Interface (CFI) driver for U-Boot.
@@ -57,12 +54,10 @@
* AMD/Spansion Application Note: Migration from Single-byte to Three-byte
* Device IDs, Publication Number 25538 Revision A, November 8, 2001
*
+ * define CFG_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
+ * reading and writing ... (yes there is such a Hardware).
*/
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_FLASH_CFI_SWAP)
-#define CFG_FLASH_CFI_SWAP
-#endif
-
#ifndef CFG_FLASH_BANKS_LIST
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
#endif
@@ -263,7 +258,7 @@ inline uchar flash_read_uchar (flash_info_t * info, uint offset)
uchar *cp;
cp = flash_make_addr (info, 0, offset);
-#if defined(CFG_FLASH_CFI_SWAP)
+#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
return (cp[0]);
#else
return (cp[info->portwidth - 1]);
@@ -290,7 +285,7 @@ ushort flash_read_ushort (flash_info_t * info, flash_sect_t sect, uint offset)
debug ("addr[%x] = 0x%x\n", x, addr[x]);
}
#endif
-#if defined(CFG_FLASH_CFI_SWAP)
+#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
retval = ((addr[(info->portwidth)] << 8) | addr[0]);
#else
retval = ((addr[(2 * info->portwidth) - 1] << 8) |
@@ -322,7 +317,7 @@ ulong flash_read_long (flash_info_t * info, flash_sect_t sect, uint offset)
debug ("addr[%x] = 0x%x\n", x, addr[x]);
}
#endif
-#if defined(CFG_FLASH_CFI_SWAP)
+#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
retval = (addr[0] << 16) | (addr[(info->portwidth)] << 24) |
(addr[(2 * info->portwidth)]) | (addr[(3 * info->portwidth)] << 8);
#else
@@ -863,7 +858,7 @@ static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
*/
static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
{
-#if defined(__LITTLE_ENDIAN)
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
unsigned short w;
unsigned int l;
unsigned long long ll;
@@ -874,7 +869,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
cword->c = c;
break;
case FLASH_CFI_16BIT:
-#if defined(__LITTLE_ENDIAN)
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
w = c;
w <<= 8;
cword->w = (cword->w >> 8) | w;
@@ -883,7 +878,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
#endif
break;
case FLASH_CFI_32BIT:
-#if defined(__LITTLE_ENDIAN)
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
l = c;
l <<= 24;
cword->l = (cword->l >> 8) | l;
@@ -892,7 +887,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
#endif
break;
case FLASH_CFI_64BIT:
-#if defined(__LITTLE_ENDIAN)
+#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
ll = c;
ll <<= 56;
cword->ll = (cword->ll >> 8) | ll;
@@ -912,22 +907,12 @@ static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf)
int i;
uchar *cp = (uchar *) cmdbuf;
-#if defined(CFG_FLASH_CFI_SWAP)
+#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
for (i = info->portwidth; i > 0; i--)
#else
for (i = 1; i <= info->portwidth; i++)
#endif
*cp++ = (i & (info->chipwidth - 1)) ? '\0' : cmd;
-#ifdef CFG_FLASH_CFI_2x16
- if ((info->portwidth == FLASH_CFI_32BIT) && (info->chipwidth == FLASH_CFI_BY16))
- {
- uchar tmp;
- cp = (uchar *) cmdbuf;
- tmp = cp[1];
- cp[1] = cp[2];
- cp[2] = tmp;
- }
-#endif /* CFG_FLASH_CFI_2x16 */
}
/*
@@ -1376,7 +1361,6 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
ctladdr.cp = flash_make_addr (info, 0, 0);
cptr.cp = (uchar *) dest;
-
/* Check if Flash is (sufficiently) erased */
switch (info->portwidth) {
case FLASH_CFI_8BIT:
@@ -1548,4 +1532,5 @@ static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
}
}
#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+
#endif /* CFG_FLASH_CFI */
diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c
index 7fdf57b..8495829 100644
--- a/drivers/nand/nand_base.c
+++ b/drivers/nand/nand_base.c
@@ -2338,7 +2338,7 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
mtd->oobblock = 1024 << (extid & 0x3);
extid >>= 2;
/* Calc oobsize */
- mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
+ mtd->oobsize = (8 << (extid & 0x01)) * (mtd->oobblock / 512);
extid >>= 2;
/* Calc blocksize. Blocksize is multiples of 64KiB */
mtd->erasesize = (64 * 1024) << (extid & 0x03);
diff --git a/dtt/Makefile b/dtt/Makefile
index 79d4e9f..e6cb128 100644
--- a/dtt/Makefile
+++ b/dtt/Makefile
@@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)libdtt.a
-COBJS = lm75.o ds1621.o adm1021.o
+COBJS = lm75.o ds1621.o adm1021.o lm81.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/dtt/lm81.c b/dtt/lm81.c
new file mode 100644
index 0000000..03bc53d
--- /dev/null
+++ b/dtt/lm81.c
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2006
+ * Heiko Schocher, DENX Software Enginnering <hs@denx.de>
+ *
+ * based on dtt/lm75.c which is ...
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * On Semiconductor's LM81 Temperature Sensor
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DTT_LM81
+#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
+ (CFG_EEPROM_PAGE_WRITE_BITS < 1)
+# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM81"
+#endif
+
+#include <i2c.h>
+#include <dtt.h>
+
+/*
+ * Device code
+ */
+#define DTT_I2C_DEV_CODE 0x2c /* ON Semi's LM81 device */
+
+int dtt_read(int sensor, int reg)
+{
+ int dlen = 1;
+ uchar data[2];
+
+ /*
+ * Calculate sensor address and register.
+ */
+ sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */
+
+ /*
+ * Now try to read the register.
+ */
+ if (i2c_read(sensor, reg, 1, data, dlen) != 0)
+ return -1;
+
+ return (int)data[0];
+} /* dtt_read() */
+
+
+int dtt_write(int sensor, int reg, int val)
+{
+ uchar data;
+
+ /*
+ * Calculate sensor address and register.
+ */
+ sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */
+
+ data = (char)(val & 0xff);
+
+ /*
+ * Write value to register.
+ */
+ if (i2c_write(sensor, reg, 1, &data, 1) != 0)
+ return 1;
+
+ return 0;
+} /* dtt_write() */
+
+#define DTT_MANU 0x3e
+#define DTT_REV 0x3f
+#define DTT_CONFIG 0x40
+#define DTT_ADR 0x48
+
+static int _dtt_init(int sensor)
+{
+ int man;
+ int adr;
+ int rev;
+
+ if (dtt_write (sensor, DTT_CONFIG, 0x01) < 0)
+ return 1;
+ /* The LM81 needs 400ms to get the correct values ... */
+ udelay (400000);
+ man = dtt_read (sensor, DTT_MANU);
+ if (man != 0x01)
+ return 1;
+ adr = dtt_read (sensor, DTT_ADR);
+ if (adr < 0)
+ return 1;
+ rev = dtt_read (sensor, DTT_REV);
+ if (adr < 0)
+ return 1;
+
+ printf ("DTT: Found LM81@%x Rev: %d\n", adr, rev);
+ return 0;
+} /* _dtt_init() */
+
+
+int dtt_init (void)
+{
+ int i;
+ unsigned char sensors[] = CONFIG_DTT_SENSORS;
+ const char *const header = "DTT: ";
+
+ for (i = 0; i < sizeof(sensors); i++) {
+ if (_dtt_init(sensors[i]) != 0)
+ printf("%s%d FAILED INIT\n", header, i+1);
+ else
+ printf("%s%d is %i C\n", header, i+1,
+ dtt_get_temp(sensors[i]));
+ }
+
+ return (0);
+} /* dtt_init() */
+
+#define TEMP_FROM_REG(temp) \
+ ((temp)<256?((((temp)&0x1fe) >> 1) * 10) + ((temp) & 1) * 5: \
+ ((((temp)&0x1fe) >> 1) -255) * 10 - ((temp) & 1) * 5) \
+
+int dtt_get_temp(int sensor)
+{
+ int val = dtt_read (sensor, DTT_READ_TEMP);
+ int tmpcnf = dtt_read (sensor, DTT_CONFIG_TEMP);
+
+ return (TEMP_FROM_REG((val << 1) + ((tmpcnf & 0x80) >> 7))) / 10;
+} /* dtt_get_temp() */
+
+#endif /* CONFIG_DTT_LM81 */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 6619686..f102600 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -747,11 +747,14 @@
#define PVR_440GX_RC 0x51B21892
#define PVR_440GX_RF 0x51B21894
#define PVR_405EP_RB 0x51210950
-#define PVR_440SP_RA 0x53221850
-#define PVR_440SP_RB 0x53221891
-#define PVR_440SP_RC 0x53221892
-#define PVR_440SPe_RA 0x53421890
-#define PVR_440SPe_RB 0x53421891
+#define PVR_440SP_6_RAB 0x53221850 /* 440SP rev A&B with RAID 6 support enabled */
+#define PVR_440SP_RAB 0x53321850 /* 440SP rev A&B without RAID 6 support */
+#define PVR_440SP_6_RC 0x53221891 /* 440SP rev C with RAID 6 support enabled */
+#define PVR_440SP_RC 0x53321891 /* 440SP rev C without RAID 6 support */
+#define PVR_440SPe_6_RA 0x53421890 /* 440SPe rev A with RAID 6 support enabled */
+#define PVR_440SPe_RA 0x53521890 /* 440SPe rev A without RAID 6 support */
+#define PVR_440SPe_6_RB 0x53421891 /* 440SPe rev B with RAID 6 support enabled */
+#define PVR_440SPe_RB 0x53521891 /* 440SPe rev B without RAID 6 support */
#define PVR_601 0x00010000
#define PVR_602 0x00050000
#define PVR_603 0x00030000
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 08674ca..7069b35 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -231,6 +231,17 @@
"protect on FC000000 +${filesize}\0"
#endif
+#ifndef CONFIG_CAM5200
+#define CUSTOM_ENV_SETTINGS \
+ "bootfile=/tftpboot/tqm5200/uImage\0" \
+ "u-boot=/tftpboot/tqm5200/u-boot.bin\0"
+#else
+#define CUSTOM_ENV_SETTINGS \
+ "bootfile=cam5200/uImage\0" \
+ "u-boot=cam5200/u-boot.bin\0" \
+ "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0"
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
@@ -248,8 +259,7 @@
"bootm ${kernel_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \
"bootm\0" \
- "bootfile=/tftpboot/tqm5200/uImage\0" \
- "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \
+ CUSTOM_ENV_SETTINGS \
"load=tftp 200000 ${u-boot}\0" \
ENV_UPDT \
""
@@ -325,15 +335,7 @@
*/
#define CFG_FLASH_BASE 0xFC000000
-#ifndef CONFIG_CAM5200
-/* use CFI flash driver */
-#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
-#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
- (= chip selects) */
-#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
-#else /* CONFIG_CAM5200 */
+#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH)
#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks
(= chip selects) */
#define CFG_FLASH_WORD_SIZE unsigned int /* main flash device with */
@@ -344,7 +346,15 @@
#define CFG_FLASH_ADDR1 0x2AA
#define CFG_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */
#define CFG_MAX_FLASH_SECT 128
-#endif /* ifndef CONFIG_CAM5200 */
+#else
+/* use CFI flash driver */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
+ (= chip selects) */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+#endif
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index bbe6b76..49027da 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -166,8 +166,23 @@
"cp.b 100000 fffc0000 40000;" \
"setenv filesize;saveenv\0" \
"upd=run load;run update\0" \
+ "ethprime=ppc_4xx_eth3\0" \
+ "ethact=ppc_4xx_eth3\0" \
+ "autoload=no\0" \
+ "ipconfig=dhcp;setenv serverip 11.0.0.152\0" \
+ "actkernel=kernel2\0" \
+ "load_fpga=fpga load 0 ffe00000 10dd9a\0" \
+ "mtdargs=setenv bootargs root=/dev/mtdblock6 rw " \
+ "rootfstype=jffs2 init=/sbin/init\0" \
+ "kernel1_mtd=nand read 200000 0 200000;run mtdargs addip addtty"\
+ ";bootm 200000\0" \
+ "kernel2_mtd=nand read 200000 200000 200000;run mtdargs addip " \
+ "addtty;bootm 200000\0" \
+ "kernel1=run ipconfig load_fpga kernel1_mtd\0" \
+ "kernel2=run ipconfig load_fpga kernel2_mtd\0" \
""
-#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_BOOTCOMMAND "run kernel2"
#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */
@@ -291,6 +306,8 @@
/*-----------------------------------------------------------------------
* Definitions for GPIO setup
*-----------------------------------------------------------------------*/
+#define CFG_GPIO_SHUTDOWN (0x80000000 >> 6)
+#define CFG_GPIO_SSD_EMPTY (0x80000000 >> 9)
#define CFG_GPIO_EREADY (0x80000000 >> 26)
#define CFG_GPIO_REV0 (0x80000000 >> 14)
#define CFG_GPIO_REV1 (0x80000000 >> 15)
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index 262e9d6..54462f0 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -168,10 +168,12 @@
#define PCI_HOST_FORCE 1 /* configure as pci host */
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI /* include pci support */
+#ifdef CONFIG_PCI
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */
+#endif /* CONFIG_PCI */
/* PCI MEMORY MAP section */
#define CFG_PCI0_MEM_BASE 0x80000000
@@ -194,7 +196,6 @@
#define CFG_PCI1_IO_SPACE_PCI 0x00000000
#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE)
-
#define CFG_PCI_IDSEL 0x30
#undef CONFIG_BOOTARGS
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index ba6b113..2cc137c 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -71,12 +71,18 @@
#define CONFIG_BAUDRATE 115200
#define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */
+#if defined(CONFIG_SCPU)
+#define CMD_NAND_ADD 0
+#else
+#define CMD_NAND_ADD CFG_CMD_NAND
+#endif
+
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_DHCP | \
CFG_CMD_DATE | \
CFG_CMD_NET | \
CFG_CMD_MII | \
- CFG_CMD_NAND | \
+ CMD_NAND_ADD | \
CFG_CMD_I2C | \
CFG_CMD_ELF | \
CFG_CMD_PING)
@@ -176,12 +182,20 @@
#define CFG_FLASH_BASE 0x50000000
#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#if defined(CONFIG_SCPU)
+#define CFG_MONITOR_LEN (384 << 10) /* Reserve 512 kB for Monitor */
+#else
#define CFG_MONITOR_LEN (504 << 10) /* Reserve 512 kB for Monitor */
+#endif
/*
* Expansion bus settings
*/
+#if defined(CONFIG_SCPU)
+#define CFG_EXP_CS0 0x94d23C42 /* 8bit, max size */
+#else
#define CFG_EXP_CS0 0x94913C43 /* 8bit, max size */
+#endif
#define CFG_EXP_CS1 0x85000043 /* 8bit, 512bytes */
/*
@@ -194,6 +208,12 @@
/*
* FLASH and environment organization
*/
+#if defined(CONFIG_SCPU)
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */
+#endif
+
#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
@@ -217,20 +237,27 @@
#define CFG_ENV_IS_IN_FLASH 1
+#if defined(CONFIG_SCPU)
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#else
#define CFG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
+#endif
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#if !defined(CONFIG_SCPU)
/*
* NAND-FLASH stuff
*/
#define CFG_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1
#define CFG_NAND_BASE 0x51000000 /* NAND FLASH Base Address */
+#endif
/*
* GPIO settings
@@ -284,9 +311,15 @@
/*
* I2C RTC
*/
+#if 0 /* test-only */
+#define CONFIG_RTC_DS1340 1
+#define CFG_I2C_RTC_ADDR 0x68
+#else
+/* M41T11 Serial Access Timekeeper(R) SRAM */
#define CONFIG_RTC_M41T11 1
#define CFG_I2C_RTC_ADDR 0x68
#define CFG_M41T11_BASE_YEAR 1900 /* play along with the linux driver */
+#endif
/*
* Spartan3 FPGA configuration support
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
new file mode 100644
index 0000000..b767449
--- /dev/null
+++ b/include/configs/sc3.h
@@ -0,0 +1,585 @@
+/*
+ * (C) Copyright 2007
+ * Heiko Schocher, DENX Software Engineering, <hs@denx.de>.
+ *
+ * From:
+ * (C) Copyright 2003
+ * Juergen Beisert, EuroDesign embedded technologies, jbeisert@eurodsn.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef USE_VGA_GRAPHICS
+
+/* Memory Map
+ * 0x00000000 .... 0x03FFFFFF -> RAM (up to 128MiB)
+ * 0x74000000 .... 0x740FFFFF -> CS#6
+ * 0x74100000 .... 0x741FFFFF -> CS#7
+ * 0x74200000 .... 0x742FFFFF -> CS4# if no internal USB
+ * 0x74300000 .... 0x743FFFFF -> CS5# if no boosted IDE
+ * 0x77C00000 .... 0x77CFFFFF -> CS4# USB HC (1 MiB)
+ * 0x77D00000 .... 0x77DFFFFF -> CS1# NAND-Flash (1 MiB)
+ * 0x78000000 .... 0x78FFFFFF -> CS2# ISA-Bus Speicherzugriff (16 MiB)
+ * 0x79000000 .... 0x7900FFFF -> CS2# ISA-Bus IO-Zugriff (16 MiB, mapped: 64kiB)
+ * 0x79010000 .... 0x79FFFFFF -> CS2# ISA-Bus IO-Zugriff (mirrored)
+ * 0x7A000000 .... 0x7A0FFFFF -> CS5# IDE emulation (1MiB)
+ *
+ * 0x80000000 .... 0x9FFFFFFF -> PCI-Bus Speicherzugriff (512MiB, mapped: 1:1)
+ * 0xA0000000 .... 0xBFFFFFFF -> PCI-Bus Speicherzugriff (512MiB, mapped: 0x00000000...0x1FFFFFFF)
+ * 0xE8000000 .... 0xE800FFFF -> PCI-Bus IO-Zugriff (64kiB, translated to PCI: 0x0000...0xFFFF)
+ * 0xE8800000 .... 0xEBFFFFFF -> PCI-Bus IO-Zugriff (56MiB, translated to PCI: 0x00800000...0x3FFFFFF)
+ * 0xEED00000 .... 0xEED00003 -> PCI-Bus
+ * 0xEF400000 .... 0xEF40003F -> PCI-Bus Local Configuration Registers
+ * 0xEF40003F .... 0xEF5FFFFF -> reserved
+ * 0xEF600000 .... 0xEFFFFFFF -> 405GP internal Devices (10 MiB)
+ * 0xF0000000 .... 0xF01FFFFF -> Flash-ROM (2 MiB)
+ * 0xF0200000 .... 0xF7FFFFFF -> free for flash devices
+ * 0xF8000000 .... 0xF8000FFF -> OnChipMemory (4kiB)
+ * 0xF8001000 .... 0xFFDFFFFF -> free for flash devices
+ * 0xFFE00000 .... 0xFFFFFFFF -> BOOT-ROM (2 MiB)
+ */
+
+#define CONFIG_SOLIDCARD3 1
+#define CONFIG_4xx 1
+#define CONFIG_405GP 1
+
+#define CONFIG_BOARD_EARLY_INIT_F 1
+
+/*
+ * Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range
+ * If undefined, IDE access uses a seperat emulation with higher access speed.
+ * Consider to inform your Linux IDE driver about the different addresses!
+ * IDE_USES_ISA_EMULATION is only used if your CONFIG_COMMANDS macro includes
+ * the CFG_CMD_IDE macro!
+ */
+#define IDE_USES_ISA_EMULATION
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CONFIG_SERIAL_MULTI
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+/*
+ * define CONFIG_POWER_DOWN if your cpu should power down while waiting for your input
+ * Works only, if you have enabled the CONFIG_SERIAL_SOFTWARE_FIFO feature
+ */
+#if CONFIG_SERIAL_SOFTWARE_FIFO
+ #define CONFIG_POWER_DOWN
+#endif
+
+/*
+ * define CONFIG_SYS_CLK_FREQ to your base crystal clock in Hz
+ */
+#define CONFIG_SYS_CLK_FREQ 33333333
+
+/*
+ * define CONFIG_BAUDRATE to the baudrate value you want to use as default
+ */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "nand_args=setenv bootargs root=/dev/mtdblock5 rw" \
+ "rootfstype=jffs2\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_nand=nand_args addip addcon;bootm ${kernel_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/sc3/uImage\0" \
+ "u-boot=/tftpboot/sc3/u-boot.bin\0" \
+ "setup=tftp 200000 /tftpboot/sc3/setup.img;autoscr 200000\0" \
+ "kernel_addr=FFE08000\0" \
+ ""
+#undef CONFIG_BOOTCOMMAND
+
+#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
+#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
+
+#if 1 /* feel free to disable for development */
+#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
+#define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with S\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "S" /* 1st "password" */
+#endif
+
+/*
+ * define CONFIG_BOOTCOMMAND to the autoboot commands. They will running after
+ * the CONFIG_BOOTDELAY delay to boot your machine
+ */
+#define CONFIG_BOOTCOMMAND "bootp;dcache on;bootm"
+
+/*
+ * define CONFIG_BOOTARGS to the default kernel parameters. They will used if you don't
+ * set different values at the u-boot prompt
+ */
+#ifdef USE_VGA_GRAPHICS
+ #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=bootp nfsroot=/tftpboot/solidcard3re"
+#else
+ #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/nfs rw ip=bootp"
+#endif
+/*
+ * Is the USB host controller assembled? If yes define CONFIG_ISP1161_PRESENT
+ * This reserves memory bank #4 for this purpose
+ */
+#undef CONFIG_ISP1161_PRESENT
+
+#undef CONFIG_LOADS_ECHO /* no echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_NET_MULTI
+/* #define CONFIG_EEPRO100_SROM_WRITE */
+/* #define CONFIG_SHOW_MAC */
+#define CONFIG_EEPRO100
+#define CONFIG_MII 1 /* add 405GP MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */
+
+#define CONFIG_COMMANDS \
+ (CONFIG_CMD_DFL | \
+ CFG_CMD_AUTOSCRIPT | \
+ CFG_CMD_PCI | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_NET | \
+ CFG_CMD_MII | \
+ CFG_CMD_PING | \
+ CFG_CMD_NAND | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_ELF )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP 1 /* undef to save memory */
+#define CFG_PROMPT "SC3> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+/*
+ * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * The Linux BASE_BAUD define should match this configuration.
+ * baseBaud = cpuClock/(uartDivisor*16)
+ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ *
+ * Consider the OPB clock! If it get lower the BASE_BAUD must be lower to
+ * (see 405GP datasheet for descritpion)
+ */
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD 921600 /* internal clock */
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+#define CFG_LOAD_ADDR 0x1000000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * IIC stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+
+#define I2C_INIT
+#define I2C_ACTIVE 0
+#define I2C_TRISTATE 0
+
+#define CFG_I2C_SPEED 100000 /* use the standard 100kHz speed */
+#define CFG_I2C_SLAVE 0x7F /* mask valid bits */
+
+#define CONFIG_RTC_DS1337
+#define CFG_I2C_RTC_ADDR 0x68
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+
+/* If you want to see, whats connected to your PCI bus */
+/* #define CONFIG_PCI_SCAN_SHOW */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*-----------------------------------------------------------------------
+ * External peripheral base address
+ *-----------------------------------------------------------------------
+ */
+#if !(CONFIG_COMMANDS & CFG_CMD_IDE)
+
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#undef CONFIG_IDE_RESET /* no reset for ide supported */
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff
+ *-----------------------------------------------------------------------
+ */
+#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+#define CONFIG_START_IDE 1 /* check, if use IDE */
+
+#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#undef CONFIG_IDE_RESET /* no reset for ide supported */
+
+#define CONFIG_ATAPI
+#define CONFIG_DOS_PARTITION
+#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+
+#ifndef IDE_USES_ISA_EMULATION
+
+/* New and faster access */
+#define CFG_ATA_BASE_ADDR 0x7A000000 /* start of ISA IO emulation */
+
+/* How many IDE busses are available */
+#define CFG_IDE_MAXBUS 1
+
+/* What IDE ports are available */
+#define CFG_ATA_IDE0_OFFSET 0x000 /* first is available */
+#undef CFG_ATA_IDE1_OFFSET /* second not available */
+
+/* access to the data port is calculated:
+ CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_DATA_OFFSET + 0 */
+#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
+
+/* access to the registers is calculated:
+ CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_REG_OFFSET + [1..7] */
+#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
+
+/* access to the alternate register is calculated:
+ CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_ALT_OFFSET + 6 */
+#define CFG_ATA_ALT_OFFSET 0x008 /* Offset for alternate registers */
+
+#else /* IDE_USES_ISA_EMULATION */
+
+#define CFG_ATA_BASE_ADDR 0x79000000 /* start of ISA IO emulation */
+
+/* How many IDE busses are available */
+#define CFG_IDE_MAXBUS 1
+
+/* What IDE ports are available */
+#define CFG_ATA_IDE0_OFFSET 0x01F0 /* first is available */
+#undef CFG_ATA_IDE1_OFFSET /* second not available */
+
+/* access to the data port is calculated:
+ CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_DATA_OFFSET + 0 */
+#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
+
+/* access to the registers is calculated:
+ CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_REG_OFFSET + [1..7] */
+#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
+
+/* access to the alternate register is calculated:
+ CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_ALT_OFFSET + 6 */
+#define CFG_ATA_ALT_OFFSET 0x03F0 /* Offset for alternate registers */
+
+#endif /* IDE_USES_ISA_EMULATION */
+
+#endif /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+
+/*
+#define CFG_KEY_REG_BASE_ADDR 0xF0100000
+#define CFG_IR_REG_BASE_ADDR 0xF0200000
+#define CFG_FPGA_REG_BASE_ADDR 0xF0300000
+*/
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ *
+ * CFG_FLASH_BASE -> start address of internal flash
+ * CFG_MONITOR_BASE -> start of u-boot
+ */
+#ifndef __ASSEMBLER__
+extern unsigned long offsetOfBigFlash;
+extern unsigned long offsetOfEnvironment;
+#endif
+
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFE00000
+#define CFG_MONITOR_BASE 0xFFFC0000 /* placed last 256k */
+#define CFG_MONITOR_LEN (224 * 1024) /* Reserve 224 KiB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 KiB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MiB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization ## FIXME: lookup in datasheet
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_CFI /* flash is CFI compat. */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver*/
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_WRITE_SWAPPED_DATA /* swap Databytes between reading/writing */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#if CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector in bottom type */
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x4000 /* see README - env sector total size */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+#endif
+/* let us changing anything in our environment */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * NAND-FLASH stuff
+ */
+#define CFG_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CFG_NAND_BASE 0x77D00000
+
+
+#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
+
+/* No command line, one static partition Partition 3 contains jffs2 rootfs */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV "nand0"
+#define CONFIG_JFFS2_PART_SIZE 0x00400000
+#define CONFIG_JFFS2_PART_OFFSET 0x00c00000
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *
+ * CFG_DCACHE_SIZE -> size of data cache:
+ * - 405GP 8k
+ * - 405GPr 16k
+ * How to handle the difference in chache size?
+ * CFG_CACHELINE_SIZE -> size of one cache line: 32 bytes
+ * (used in cpu/ppc4xx/start.S)
+*/
+#define CFG_DCACHE_SIZE 16384
+
+#define CFG_CACHELINE_SIZE 32
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ */
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE
+#define FLASH_BASE1_PRELIM 0
+
+/*-----------------------------------------------------------------------
+ * Some informations about the internal SRAM (OCM=On Chip Memory)
+ *
+ * CFG_OCM_DATA_ADDR -> location
+ * CFG_OCM_DATA_SIZE -> size
+*/
+
+#define CFG_TEMP_STACK_OCM 1
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM):
+ * - we are using the internal 4k SRAM, so we don't need data cache mapping
+ * - internal SRAM (OCM=On Chip Memory) is placed to CFG_OCM_DATA_ADDR
+ * - Stackpointer will be located to
+ * (CFG_INIT_RAM_ADDR&0xFFFF0000) | (CFG_INIT_SP_OFFSET&0x0000FFFF)
+ * in cpu/ppc4xx/start.S
+ */
+
+#undef CFG_INIT_DCACHE_CS
+/* Where the internal SRAM starts */
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR
+/* Where the internal SRAM ends (only offset) */
+#define CFG_INIT_RAM_END 0x0F00
+
+/*
+
+ CFG_INIT_RAM_ADDR ------> ------------ lower address
+ | |
+ | ^ |
+ | | |
+ | | Stack |
+ CFG_GBL_DATA_OFFSET ----> ------------
+ | |
+ | 64 Bytes |
+ | |
+ CFG_INIT_RAM_END ------> ------------ higher address
+ (offset only)
+
+*/
+/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_SIZE 64
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* Initial value of the stack pointern in internal SRAM */
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/* ################################################################################### */
+/* These defines will be used in cpu/ppc4xx/cpu_init.c to setup external chip selects */
+/* They are currently undefined cause they are initiaized in board/solidcard3/init.S */
+
+/* This chip select accesses the boot device */
+/* It depends on boot select switch if this device is 16 or 8 bit */
+
+#undef CFG_EBC_PB0AP
+#undef CFG_EBC_PB0CR
+
+#undef CFG_EBC_PB1AP
+#undef CFG_EBC_PB1CR
+
+#undef CFG_EBC_PB2AP
+#undef CFG_EBC_PB2CR
+
+#undef CFG_EBC_PB3AP
+#undef CFG_EBC_PB3CR
+
+#undef CFG_EBC_PB4AP
+#undef CFG_EBC_PB4CR
+
+#undef CFG_EBC_PB5AP
+#undef CFG_EBC_PB5CR
+
+#undef CFG_EBC_PB6AP
+#undef CFG_EBC_PB6CR
+
+#undef CFG_EBC_PB7AP
+#undef CFG_EBC_PB7CR
+
+#define CFG_EBC_CFG 0xb84ef000
+
+#define CONFIG_SDRAM_BANK0 /* use the standard SDRAM initialization */
+#undef CONFIG_SPD_EEPROM
+
+/*
+ * Define this to get more information about system configuration
+ */
+/* #define SC3_DEBUGOUT */
+#undef SC3_DEBUGOUT
+
+/***********************************************************************
+ * External peripheral base address
+ ***********************************************************************/
+
+#define CFG_ISA_MEM_BASE_ADDRESS 0x78000000
+/*
+ Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu.
+ Das funktioniert bei deren Karten, weil sie eine PCI-Bridge benutzen, die
+ das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen
+ auf ISA- und PCI-Zyklen)
+ */
+#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000
+/*#define CFG_ISA_IO_BASE_ADDRESS 0x79000000 */
+
+/************************************************************
+ * Video support
+ ************************************************************/
+
+#ifdef USE_VGA_GRAPHICS
+#define CONFIG_VIDEO /* To enable video controller support */
+#define CONFIG_VIDEO_CT69000
+#define CONFIG_CFB_CONSOLE
+/* #define CONFIG_VIDEO_LOGO */
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_SW_CURSOR
+/* #define CONFIG_VIDEO_HW_CURSOR */
+#define CONFIG_VIDEO_ONBOARD /* Video controller is on-board */
+
+#define VIDEO_HW_RECTFILL
+#define VIDEO_HW_BITBLT
+
+#endif
+
+/************************************************************
+ * Ident
+ ************************************************************/
+#define CONFIG_SC3_VERSION "r1.4"
+
+#define POST_OUT(x) (*((volatile unsigned char*)(0x79000080))=x)
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 00b9222..e7f0108 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -188,7 +188,10 @@
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#define CFG_MBYTES_SDRAM (256) /* 256MB */
+#define CFG_MBYTES_SDRAM (256) /* 256MB */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */
+#endif
/*-----------------------------------------------------------------------
* I2C
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index 9d3609a..09bbebd 100644
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -44,19 +44,19 @@
#define CONFIG_BAUDRATE 19200
/* use PLD CLK4 instead of brg */
-#undef CFG_SPC1920_SMC1_CLK4
+#define CFG_SPC1920_SMC1_CLK4
#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */
#define CONFIG_8xx_CPUCLK_DEFAULT 50000000
#define CFG_8xx_CPUCLK_MIN 40000000
#define CFG_8xx_CPUCLK_MAX 133000000
-#define CFG_RESET_ADDRESS 0xf8000000
+#define CFG_RESET_ADDRESS 0xC0000000
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_LAST_STAGE_INIT
-
-#if 1
+#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
@@ -83,12 +83,13 @@
#ifndef CONFIG_COMMANDS
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_ASKENV \
+ | CFG_CMD_DATE \
| CFG_CMD_ECHO \
| CFG_CMD_IMMAP \
| CFG_CMD_JFFS2 \
| CFG_CMD_PING \
| CFG_CMD_DHCP \
- | CFG_CMD_IMMAP \
+ | CFG_CMD_I2C \
| CFG_CMD_MII)
/* & ~( CFG_CMD_NET)) */
@@ -193,13 +194,39 @@
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#ifdef CFG_CMD_DATE
+# define CONFIG_RTC_DS3231
+# define CFG_I2C_RTC_ADDR 0x68
+#endif
+
/*-----------------------------------------------------------------------
* I2C configuration
*/
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */
-#define CFG_I2C_SLAVE 0x7F
+/* enable I2C and select the hardware/software driver */
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+
+#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */
+#define CFG_I2C_SLAVE 0xFE
+
+#ifdef CONFIG_SOFT_I2C
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PB_SCL 0x00000020 /* PB 26 */
+#define PB_SDA 0x00000010 /* PB 27 */
+
+#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
+#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
+#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
#endif
/*-----------------------------------------------------------------------
@@ -220,7 +247,7 @@
*-----------------------------------------------------------------------
* PCMCIA config., multi-function pin tri-state
*/
-#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#define CFG_SIUMCR (SIUMCR_FRC)
/*-----------------------------------------------------------------------
* TBSCR - Time Base Status and Control 11-26
@@ -283,7 +310,7 @@
* FLASH timing:
*/
#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
- OR_SCY_3_CLK | OR_EHTR | OR_BI)
+ OR_SCY_6_CLK | OR_EHTR | OR_BI)
#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
@@ -330,7 +357,56 @@
MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */
-/* PLD CS5 */
+/*
+ * DSP Host Port Interface CS3
+ */
+#define CFG_SPC1920_HPI_BASE 0x90000000
+#define CFG_PRELIM_OR3_AM 0xF8000000
+
+#define CFG_OR3 (CFG_PRELIM_OR3_AM | \
+ OR_G5LS | \
+ OR_SCY_0_CLK | \
+ OR_BI)
+
+#define CFG_BR3 ((CFG_SPC1920_HPI_BASE & BR_BA_MSK) | \
+ BR_MS_UPMA | \
+ BR_PS_16 | \
+ BR_V);
+
+#define CFG_MAMR (MAMR_GPL_A4DIS | \
+ MAMR_RLFA_5X | \
+ MAMR_WLFA_5X)
+
+#define CONFIG_SPC1920_HPI_TEST
+
+#ifdef CONFIG_SPC1920_HPI_TEST
+#define HPI_REG(x) (*((volatile u16 *) (CFG_SPC1920_HPI_BASE + x)))
+#define HPI_HPIC_1 HPI_REG(0)
+#define HPI_HPIC_2 HPI_REG(2)
+#define HPI_HPIA_1 HPI_REG(0x2000008)
+#define HPI_HPIA_2 HPI_REG(0x2000008 + 2)
+#define HPI_HPID_INC_1 HPI_REG(0x1000004)
+#define HPI_HPID_INC_2 HPI_REG(0x1000004 + 2)
+#define HPI_HPID_NOINC_1 HPI_REG(0x300000c)
+#define HPI_HPID_NOINC_2 HPI_REG(0x300000c + 2)
+#endif /* CONFIG_SPC1920_HPI_TEST */
+
+/*
+ * Ramtron FM18L08 FRAM 32KB on CS4
+ */
+#define CFG_SPC1920_FRAM_BASE 0x80100000
+#define CFG_PRELIM_OR4_AM 0xffff8000
+#define CFG_OR4 (CFG_PRELIM_OR4_AM | \
+ OR_ACS_DIV2 | \
+ OR_BI | \
+ OR_SCY_4_CLK | \
+ OR_TRLX)
+
+#define CFG_BR4 ((CFG_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
+
+/*
+ * PLD CS5
+ */
#define CFG_SPC1920_PLD_BASE 0x80000000
#define CFG_PRELIM_OR5_AM 0xffff8000
@@ -343,10 +419,6 @@
#define CFG_BR5_PRELIM ((CFG_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
-/* #define CFG_PLD_BASE 0x30000000 */
-/* #define CFG_OR5_PRELIM 0xffff1110 */
-/* #define CFG_BR5_PRELIM 0x30000401 */
-
/*
* Internal Definitions
*
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
new file mode 100644
index 0000000..7ace397
--- /dev/null
+++ b/include/configs/taishan.h
@@ -0,0 +1,333 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * TAISHAN.h - configuration for AMCC 440GX Ref
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_TAISHAN 1 /* Board is taishan */
+#define CONFIG_440GX 1 /* Specifc GX support */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#undef CFG_DRAM_TEST /* Disable-takes long time! */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */
+#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
+#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
+#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
+
+#define CFG_EBC0_FLASH_BASE CFG_FLASH_BASE
+#define CFG_EBC1_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x01000000)
+#define CFG_EBC2_LCM_BASE (CFG_PERIPHERAL_BASE + 0x02000000)
+#define CFG_EBC3_CONN_BASE (CFG_PERIPHERAL_BASE + 0x08000000)
+
+#define CFG_GPIO_BASE (CFG_PERIPHERAL_BASE + 0x00000700)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM 1
+#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM*/
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data*/
+
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/
+#define CFG_MALLOC_LEN (1024 * 1024) /* Reserve 1024 kB for malloc*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CONFIG_UART1_CONSOLE 1 /* use of UART1 as console */
+#define CONFIG_SERIAL_MULTI 1 /* enable serial multi support */
+#define CFG_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */
+#define CONFIG_BAUDRATE 115200
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * E2PROM bootstrap configure value
+ *----------------------------------------------------------------------*/
+
+/*
+ * 800/133/66
+ * IIC 0~15: 86 78 11 6a 61 A7 04 62 00 00 00 00 00 00 00 00
+ */
+
+/*
+ * 800/160/80
+ * IIC 0~15: 86 78 c1 a6 09 67 04 63 00 00 00 00 00 00 00 00
+ */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0 */
+#define CFG_SDRAM0_TR0 0xC10A401A
+#undef CONFIG_SDRAM_ECC /* enable ECC support */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#undef CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CFG_BOOTSTRAP_IIC_ADDR 0x50
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible) */
+#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
+#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
+#define CFG_DTT_MAX_TEMP 70
+#define CFG_DTT_LOW_TEMP -30
+#define CFG_DTT_HYSTERESIS 3
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=taishan\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/taishan/uImage\0" \
+ "kernel_addr=fc000000\0" \
+ "ramdisk_addr=fc180000\0" \
+ "load=tftp 100000 /tftpboot/taishan/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ "fixedip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \
+ "$(gatewayip):$(netmask):$(hostname):$(netdev):off panic=1\0" \
+ "dhcp=setenv bootargs $(bootargs) ip=dhcp\0" \
+ "kozio=bootm 0xffe00000\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*-----------------------------------------------------------------------
+ * Networking
+ *----------------------------------------------------------------------*/
+#define CONFIG_EMAC_NR_START 2 /* start with EMAC 2 (skip 0&1) */
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */
+#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */
+#define CONFIG_PHY2_ADDR 0x1
+#define CONFIG_PHY3_ADDR 0x3
+#define CONFIG_ET1011C_PHY 1
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#define CONFIG_HAS_ETH3
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_RESET_DELAY 1000
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+
+/*-----------------------------------------------------------------------
+ * Console/Commands/Parser
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_DTT | \
+ CFG_CMD_ELF | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_EEPRO100 1 /* include PCI EEPRO100 */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT /* let board init pci target */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/uc101.h b/include/configs/uc101.h
new file mode 100644
index 0000000..8cd8e9b
--- /dev/null
+++ b/include/configs/uc101.h
@@ -0,0 +1,353 @@
+/*
+ * (C) Copyright 2003-2006
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
+#define CONFIG_UC101 1 /* UC101 board */
+
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DISPLAY | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_PING | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_DTT | \
+ CFG_CMD_IDE | \
+ CFG_CMD_FAT | \
+ CFG_CMD_NFS | \
+ CFG_CMD_MII | \
+ CFG_CMD_SNTP )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
+
+#if (TEXT_BASE == 0xFFF00000) /* Boot low */
+# define CFG_LOWBOOT 1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addwdt=setenv bootargs ${bootargs} wdt=off" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "net_nfs=tftp 300000 ${bootfile};run nfsargs addip addwdt;bootm\0" \
+ "rootpath=/opt/eldk/ppc_82xx\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run net_nfs"
+
+#define CONFIG_MISC_INIT_R 1
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR 0x58
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+/* for LM81 */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR 0x51
+
+/* I2C SYSMON (LM75) */
+#define CONFIG_DTT_LM81 1 /* ON Semi's LM75 */
+#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
+#define CFG_DTT_MAX_TEMP 70
+#define CFG_DTT_LOW_TEMP -30
+#define CFG_DTT_HYSTERESIS 3
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE 0xFF800000
+
+#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */
+#define CFG_MAX_FLASH_SECT 140 /* max num of sects on one chip */
+
+#define CFG_ENV_ADDR (TEXT_BASE+0x40000) /* second sector */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
+ (= chip selects) */
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_CFI_AMD_RESET
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x4000
+#define CFG_ENV_SECT_SIZE 0x10000
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SRAM_BASE 0x80100000 /* CS 1 */
+#define CFG_DISPLAY_BASE 0x80600000 /* CS 3 */
+#define CFG_IB_MASTER 0xc0510000 /* CS 6 */
+#define CFG_IB_EPLD 0xc0500000 /* CS 7 */
+
+/* Settings for XLB = 132 MHz */
+#define SDRAM_DDR 1
+#define SDRAM_MODE 0x018D0000
+#define SDRAM_EMODE 0x40090000
+#define SDRAM_CONTROL 0x714f0f00
+#define SDRAM_CONFIG1 0x73722930
+#define SDRAM_CONFIG2 0x47770000
+#define SDRAM_TAPDELAY 0x10000000
+
+/* SRAM */
+#define SRAM_BASE CFG_SRAM_BASE /* SRAM base address */
+#define SRAM_LEN 0x1fffff
+#define SRAM_END (SRAM_BASE + SRAM_LEN)
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#endif
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
+#define CFG_MALLOC_LEN (512 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_PHY_ADDR 0x00
+#define CONFIG_MII 1
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG 0x4d558044
+
+/*use Hardware WDT */
+#define CONFIG_HW_WATCHDOG
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+/* Enable an alternate, more extensive memory test */
+#define CFG_ALT_MEMTEST
+
+#define CFG_MEMTEST_START 0x00300000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 3 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x300000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+#else
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
+#endif
+
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x00045D00
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+/* 8Mbit SRAM @0x80100000 */
+#define CFG_CS1_START CFG_SRAM_BASE
+#define CFG_CS1_SIZE 0x00100000
+#define CFG_CS1_CFG 0x21D00
+
+/* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */
+#define CFG_CS3_START CFG_DISPLAY_BASE
+#define CFG_CS3_SIZE 0x00000100
+#define CFG_CS3_CFG 0x00081802
+
+/* Interbus Master 16 Bit */
+#define CFG_CS6_START CFG_IB_MASTER
+#define CFG_CS6_SIZE 0x00010000
+#define CFG_CS6_CFG 0x00FF3500
+
+/* Interbus EPLD 8 Bit */
+#define CFG_CS7_START CFG_IB_EPLD
+#define CFG_CS7_SIZE 0x00010000
+#define CFG_CS7_CFG 0x00081800
+
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x33333333
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
+
+#define CONFIG_IDE_PREINIT 1
+/* #define CONFIG_IDE_RESET 1 beispile siehe tqm5200.c */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (0x0060)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (0x005C)
+
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
+
+#define CONFIG_ATAPI 1
+
+/*---------------------------------------------------------------------*/
+/* Display addresses */
+/*---------------------------------------------------------------------*/
+#define CFG_DISP_CHR_RAM (CFG_DISPLAY_BASE + 0x38)
+#define CFG_DISP_CWORD (CFG_DISPLAY_BASE + 0x30)
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 554a7a4..e19591d 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -39,6 +39,7 @@
#define CONFIG_NETCONSOLE 1
#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* do board-specific init */
#define CFG_XLB_PIPELINING 1 /* gives better performance */
@@ -101,7 +102,7 @@
CFG_CMD_IRQ | \
CFG_CMD_JFFS2 | \
CFG_CMD_MII | \
- CFG_CMD_SDRAMi | \
+ CFG_CMD_SDRAM | \
CFG_CMD_DATE | \
CFG_CMD_USB | \
CFG_CMD_FAT)
@@ -135,7 +136,7 @@
"preboot=echo;echo Type \"run flash_nfs\" to mount root " \
"filesystem over NFS; echo\0" \
"netdev=eth0\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw wdt=off \0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
"$(netmask):$(hostname):$(netdev):off panic=1\0" \
@@ -144,7 +145,7 @@
"$(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$(serverip):$(rootpath)\0" \
+ "nfsroot=$(serverip):$(rootpath) wdt=off\0" \
"hostname=v38b\0" \
"ethact=FEC ETHERNET\0" \
"rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index 58717f8..911a52d 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -302,6 +302,20 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+#define CFG_CPLD 0x80000000
+
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x03017300
+#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000)
+
+/* Memory Bank 2 (CPLD) initialization */
+#define CFG_EBC_PB2AP 0x04814500
+#define CFG_EBC_PB2CR (CFG_CPLD | 0x18000)
+
+/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 6e942ab..2cc18db 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -307,6 +307,20 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+#define CFG_CPLD 0x80000000
+
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x03017300
+#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000)
+
+/* Memory Bank 2 (CPLD) initialization */
+#define CFG_EBC_PB2AP 0x04814500
+#define CFG_EBC_PB2CR (CFG_CPLD | 0x18000)
+
+/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
diff --git a/include/dtt.h b/include/dtt.h
index a17aa67..842a761 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -29,6 +29,7 @@
#if defined(CONFIG_DTT_LM75) || \
defined(CONFIG_DTT_DS1621) || \
+ defined(CONFIG_DTT_LM81) || \
defined(CONFIG_DTT_ADM1021)
#define CONFIG_DTT /* We have a DTT */
@@ -58,6 +59,14 @@ extern int dtt_get_temp(int sensor);
#define DTT_TEMP_SET 0x3
#endif
+#if defined(CONFIG_DTT_LM81)
+#define DTT_READ_TEMP 0x27
+#define DTT_CONFIG_TEMP 0x4b
+#define DTT_TEMP_MAX 0x39
+#define DTT_TEMP_HYST 0x3a
+#define DTT_CONFIG 0x40
+#endif
+
#if defined(CONFIG_DTT_DS1621)
#define DTT_READ_TEMP 0xAA
#define DTT_READ_COUNTER 0xA8
diff --git a/include/ppc405.h b/include/ppc405.h
index 4470240..e475fa5 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -160,6 +160,7 @@
#define mem_bear 0x10 /* bus error address reg */
#endif
#define mem_mcopt1 0x20 /* memory controller options 1 */
+ #define mem_status 0x24 /* memory status */
#define mem_rtr 0x30 /* refresh timer reg */
#define mem_pmit 0x34 /* power management idle timer */
#define mem_mb0cf 0x40 /* memory bank 0 configuration */
diff --git a/include/ppc440.h b/include/ppc440.h
index 50f4ec4..91cff41 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -887,12 +887,14 @@
/* PLB4 Arbiter - PowerPC440EP Pass1 */
#define PLB4_DCR_BASE 0x080
+#define plb4_acr (PLB4_DCR_BASE+0x1)
#define plb4_revid (PLB4_DCR_BASE+0x2)
-#define plb4_acr (PLB4_DCR_BASE+0x3)
#define plb4_besr (PLB4_DCR_BASE+0x4)
#define plb4_bearl (PLB4_DCR_BASE+0x6)
#define plb4_bearh (PLB4_DCR_BASE+0x7)
+#define PLB4_ACR_WRP (0x80000000 >> 7)
+
/* Nebula PLB4 Arbiter - PowerPC440EP */
#define PLB_ARBITER_BASE 0x80
@@ -3284,26 +3286,26 @@ typedef struct { unsigned long add; /* gpio core base address */
/*
* Macros for accessing the indirect EBC registers
*/
-#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd)
+#define mtebc(reg, data) { mtdcr(ebccfga,reg);mtdcr(ebccfgd,data); }
+#define mfebc(reg, data) { mtdcr(ebccfga,reg);data = mfdcr(ebccfgd); }
/*
* Macros for accessing the indirect SDRAM controller registers
*/
-#define mtsdram(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
-#define mfsdram(reg, data) mtdcr(memcfga,reg);data = mfdcr(memcfgd)
+#define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); }
+#define mfsdram(reg, data) { mtdcr(memcfga,reg);data = mfdcr(memcfgd); }
/*
* Macros for accessing the indirect clocking controller registers
*/
-#define mtclk(reg, data) mtdcr(clkcfga,reg);mtdcr(clkcfgd,data)
-#define mfclk(reg, data) mtdcr(clkcfga,reg);data = mfdcr(clkcfgd)
+#define mtclk(reg, data) { mtdcr(clkcfga,reg);mtdcr(clkcfgd,data); }
+#define mfclk(reg, data) { mtdcr(clkcfga,reg);data = mfdcr(clkcfgd); }
/*
* Macros for accessing the sdr controller registers
*/
-#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data)
-#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd)
+#define mtsdr(reg, data) { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); }
+#define mfsdr(reg, data) { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); }
#ifndef __ASSEMBLY__
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index f424121..24e8e97 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -76,6 +76,10 @@
extern int update_flash_size (int flash_size);
#endif
+#if defined(CONFIG_SOLIDCARD3)
+extern void sc3_read_eeprom(void);
+#endif
+
#if (CONFIG_COMMANDS & CFG_CMD_DOC)
void doc_init (void);
#endif
@@ -93,6 +97,9 @@ static char *failed = "*** failed ***\n";
extern flash_info_t flash_info[];
#endif
+#if defined(CONFIG_START_IDE)
+extern int board_start_ide(void);
+#endif
#include <environment.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -815,6 +822,9 @@ void board_init_r (gd_t *id, ulong dest_addr)
#endif /* CONFIG_405GP, CONFIG_405EP */
#endif /* CFG_EXTBDINFO */
+#if defined(CONFIG_SOLIDCARD3)
+ sc3_read_eeprom();
+#endif
s = getenv ("ethaddr");
#if defined (CONFIG_MBX) || \
defined (CONFIG_RPXCLASSIC) || \
@@ -921,6 +931,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
defined(CONFIG_KUP4X) || \
defined(CONFIG_LWMON) || \
defined(CONFIG_PCU_E) || \
+ defined(CONFIG_SOLIDCARD3) || \
defined(CONFIG_W7O) || \
defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
@@ -1030,7 +1041,12 @@ void board_init_r (gd_t *id, ulong dest_addr)
# else
puts ("IDE: ");
#endif
+#if defined(CONFIG_START_IDE)
+ if (board_start_ide())
+ ide_init ();
+#else
ide_init ();
+#endif
#endif /* CFG_CMD_IDE */
#ifdef CONFIG_LAST_STAGE_INIT
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
index a71f583..b42da8c 100644
--- a/nand_spl/board/amcc/sequoia/Makefile
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -76,7 +76,9 @@ $(obj)init.S:
$(obj)sdram.c:
@rm -f $(obj)sdram.c
+ @rm -f $(obj)sdram.h
ln -s $(SRCTREE)/board/amcc/sequoia/sdram.c $(obj)sdram.c
+ ln -s $(SRCTREE)/board/amcc/sequoia/sdram.h $(obj)sdram.h
# from nand_spl directory
$(obj)nand_boot.c:
diff --git a/rtc/Makefile b/rtc/Makefile
index cf2b24e..cdc8ac9 100644
--- a/rtc/Makefile
+++ b/rtc/Makefile
@@ -29,7 +29,7 @@ LIB = $(obj)librtc.a
COBJS = date.o \
bf533_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \
- ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o \
+ ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o ds3231.o \
m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \
mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o
diff --git a/rtc/ds3231.c b/rtc/ds3231.c
new file mode 100644
index 0000000..50aeeb5
--- /dev/null
+++ b/rtc/ds3231.c
@@ -0,0 +1,193 @@
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, mk@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
+ * Extremly Accurate DS3231 Real Time Clock (RTC).
+ *
+ * copied from ds1337.c
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <i2c.h>
+
+#if defined(CONFIG_RTC_DS3231) && (CONFIG_COMMANDS & CFG_CMD_DATE)
+
+/*---------------------------------------------------------------------*/
+#undef DEBUG_RTC
+
+#ifdef DEBUG_RTC
+#define DEBUGR(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGR(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+/*
+ * RTC register addresses
+ */
+#define RTC_SEC_REG_ADDR 0x0
+#define RTC_MIN_REG_ADDR 0x1
+#define RTC_HR_REG_ADDR 0x2
+#define RTC_DAY_REG_ADDR 0x3
+#define RTC_DATE_REG_ADDR 0x4
+#define RTC_MON_REG_ADDR 0x5
+#define RTC_YR_REG_ADDR 0x6
+#define RTC_CTL_REG_ADDR 0x0e
+#define RTC_STAT_REG_ADDR 0x0f
+
+
+/*
+ * RTC control register bits
+ */
+#define RTC_CTL_BIT_A1IE 0x1 /* Alarm 1 interrupt enable */
+#define RTC_CTL_BIT_A2IE 0x2 /* Alarm 2 interrupt enable */
+#define RTC_CTL_BIT_INTCN 0x4 /* Interrupt control */
+#define RTC_CTL_BIT_RS1 0x8 /* Rate select 1 */
+#define RTC_CTL_BIT_RS2 0x10 /* Rate select 2 */
+#define RTC_CTL_BIT_DOSC 0x80 /* Disable Oscillator */
+
+/*
+ * RTC status register bits
+ */
+#define RTC_STAT_BIT_A1F 0x1 /* Alarm 1 flag */
+#define RTC_STAT_BIT_A2F 0x2 /* Alarm 2 flag */
+#define RTC_STAT_BIT_OSF 0x80 /* Oscillator stop flag */
+
+
+static uchar rtc_read (uchar reg);
+static void rtc_write (uchar reg, uchar val);
+static uchar bin2bcd (unsigned int n);
+static unsigned bcd2bin (uchar c);
+
+
+/*
+ * Get the current time from the RTC
+ */
+void rtc_get (struct rtc_time *tmp)
+{
+ uchar sec, min, hour, mday, wday, mon_cent, year, control, status;
+
+ control = rtc_read (RTC_CTL_REG_ADDR);
+ status = rtc_read (RTC_STAT_REG_ADDR);
+ sec = rtc_read (RTC_SEC_REG_ADDR);
+ min = rtc_read (RTC_MIN_REG_ADDR);
+ hour = rtc_read (RTC_HR_REG_ADDR);
+ wday = rtc_read (RTC_DAY_REG_ADDR);
+ mday = rtc_read (RTC_DATE_REG_ADDR);
+ mon_cent = rtc_read (RTC_MON_REG_ADDR);
+ year = rtc_read (RTC_YR_REG_ADDR);
+
+ DEBUGR ("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
+ "hr: %02x min: %02x sec: %02x control: %02x status: %02x\n",
+ year, mon_cent, mday, wday, hour, min, sec, control, status);
+
+ if (status & RTC_STAT_BIT_OSF) {
+ printf ("### Warning: RTC oscillator has stopped\n");
+ /* clear the OSF flag */
+ rtc_write (RTC_STAT_REG_ADDR,
+ rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF);
+ }
+
+ tmp->tm_sec = bcd2bin (sec & 0x7F);
+ tmp->tm_min = bcd2bin (min & 0x7F);
+ tmp->tm_hour = bcd2bin (hour & 0x3F);
+ tmp->tm_mday = bcd2bin (mday & 0x3F);
+ tmp->tm_mon = bcd2bin (mon_cent & 0x1F);
+ tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900);
+ tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
+ tmp->tm_yday = 0;
+ tmp->tm_isdst= 0;
+
+ DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+}
+
+
+/*
+ * Set the RTC
+ */
+void rtc_set (struct rtc_time *tmp)
+{
+ uchar century;
+
+ DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
+
+ century = (tmp->tm_year >= 2000) ? 0x80 : 0;
+ rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century);
+
+ rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
+ rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
+ rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
+ rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
+ rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
+}
+
+
+/*
+ * Reset the RTC. We also enable the oscillator output on the
+ * SQW/INTB* pin and program it for 32,768 Hz output. Note that
+ * according to the datasheet, turning on the square wave output
+ * increases the current drain on the backup battery from about
+ * 600 nA to 2uA.
+ */
+void rtc_reset (void)
+{
+ rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2);
+}
+
+
+/*
+ * Helper functions
+ */
+
+static
+uchar rtc_read (uchar reg)
+{
+ return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+}
+
+
+static void rtc_write (uchar reg, uchar val)
+{
+ i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+}
+
+static unsigned bcd2bin (uchar n)
+{
+ return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+}
+
+static unsigned char bin2bcd (unsigned int n)
+{
+ return (((n / 10) << 4) | (n % 10));
+}
+
+#endif /* (CONFIG_RTC_DS3231) && (CONFIG_COMMANDS & CFG_CMD_DATE) */