summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2015-02-21 22:01:09 -0500
committerTom Rini <trini@ti.com>2015-02-21 22:01:09 -0500
commitded4bc3a8ba6e96811f761b358b4c628ec927ade (patch)
treec20e768fb197b86dfdff5dad53c5530217fafdae
parent46414296953410706e917cef9238926084e83a4b (diff)
parent77ef136950b4649ff4844c3b72dab107a9c565a0 (diff)
downloadu-boot-imx-ded4bc3a8ba6e96811f761b358b4c628ec927ade.zip
u-boot-imx-ded4bc3a8ba6e96811f761b358b4c628ec927ade.tar.gz
u-boot-imx-ded4bc3a8ba6e96811f761b358b4c628ec927ade.tar.bz2
Merge git://git.denx.de/u-boot-sunxi
-rw-r--r--arch/arm/include/asm/arch-sunxi/clock_sun4i.h9
-rw-r--r--board/sunxi/Kconfig48
-rw-r--r--board/sunxi/board.c10
-rw-r--r--configs/Ampe_A76_defconfig1
-rw-r--r--configs/Chuwi_V7_CW0825_defconfig1
-rw-r--r--configs/Hyundai_A7HD_defconfig1
-rw-r--r--configs/Inet_86VS_defconfig1
-rw-r--r--configs/TZX-Q8-713B7_defconfig1
-rw-r--r--configs/UTOO_P66_defconfig21
-rw-r--r--drivers/mmc/sunxi_mmc.c6
-rw-r--r--drivers/usb/musb-new/sunxi.c29
-rw-r--r--drivers/video/sunxi_display.c18
-rw-r--r--include/configs/sun4i.h4
-rw-r--r--include/configs/sun5i.h4
-rw-r--r--include/configs/sun7i.h4
-rw-r--r--include/configs/sunxi-common.h46
16 files changed, 192 insertions, 12 deletions
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
index d297ed0..c28ee05 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
@@ -144,7 +144,16 @@ struct sunxi_ccm_reg {
#define PLL1_CFG_DEFAULT 0xa1005000
+#if defined CONFIG_OLD_SUNXI_KERNEL_COMPAT && defined CONFIG_MACH_SUN5I
+/*
+ * Older linux-sunxi-3.4 kernels override our PLL6 setting with 300 MHz,
+ * halving the mbus frequency, so set it to 300 MHz ourselves and base the
+ * mbus divider on that.
+ */
+#define PLL6_CFG_DEFAULT 0xa1009900
+#else
#define PLL6_CFG_DEFAULT 0xa1009911
+#endif
/* nand clock */
#define NAND_CLK_SRC_OSC24 0
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 3eab81f..9cf54e5 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -223,6 +223,14 @@ config USB0_VBUS_PIN
Set the Vbus enable pin for usb0 (otg). This takes a string in the
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+config USB0_VBUS_DET
+ string "Vbus detect pin for usb0 (otg)"
+ depends on USB_MUSB_SUNXI
+ default ""
+ ---help---
+ Set the Vbus detect pin for usb0 (otg). This takes a string in the
+ format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
config USB1_VBUS_PIN
string "Vbus enable pin for usb1 (ehci0)"
default "PH6" if MACH_SUN4I || MACH_SUN7I
@@ -312,6 +320,14 @@ config VIDEO_LCD_POWER
Set the power enable pin for the LCD panel. This takes a string in the
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+config VIDEO_LCD_RESET
+ string "LCD panel reset pin"
+ depends on VIDEO
+ default ""
+ ---help---
+ Set the reset pin for the LCD panel. This takes a string in the format
+ understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
config VIDEO_LCD_BL_EN
string "LCD panel backlight enable pin"
depends on VIDEO
@@ -336,6 +352,30 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW
---help---
Set this if the backlight pwm output is active low.
+config VIDEO_LCD_PANEL_I2C
+ bool "LCD panel needs to be configured via i2c"
+ depends on VIDEO
+ default m
+ ---help---
+ Say y here if the LCD panel needs to be configured via i2c. This
+ will add a bitbang i2c controller using gpios to talk to the LCD.
+
+config VIDEO_LCD_PANEL_I2C_SDA
+ string "LCD panel i2c interface SDA pin"
+ depends on VIDEO_LCD_PANEL_I2C
+ default "PG12"
+ ---help---
+ Set the SDA pin for the LCD i2c interface. This takes a string in the
+ format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config VIDEO_LCD_PANEL_I2C_SCL
+ string "LCD panel i2c interface SCL pin"
+ depends on VIDEO_LCD_PANEL_I2C
+ default "PG10"
+ ---help---
+ Set the SCL pin for the LCD i2c interface. This takes a string in the
+ format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
# Note only one of these may be selected at a time! But hidden choices are
# not supported by Kconfig
@@ -374,6 +414,14 @@ config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
---help---
7.85" 1024x768 Hitachi tx18d42vm LCD panel support
+config VIDEO_LCD_TL059WV5C0
+ bool "tl059wv5c0 LCD panel"
+ select VIDEO_LCD_PANEL_I2C
+ select VIDEO_LCD_IF_PARALLEL
+ ---help---
+ 6" 480x800 tl059wv5c0 panel support, as used on the Utoo P66 and
+ Aigo M60/M608/M606 tablets.
+
endchoice
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index b70e00c..e1891d1 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -33,6 +33,12 @@
#include <linux/usb/musb.h>
#include <net.h>
+#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
+/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
+int soft_i2c_gpio_sda;
+int soft_i2c_gpio_scl;
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
/* add board specific code here */
@@ -152,6 +158,10 @@ void i2c_init_board(void)
sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUNXI_GPB0_TWI0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUNXI_GPB0_TWI0);
clock_twi_onoff(0, 1);
+#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
+ soft_i2c_gpio_sda = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SDA);
+ soft_i2c_gpio_scl = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_PANEL_I2C_SCL);
+#endif
}
#ifdef CONFIG_SPL_BUILD
diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
index 2054fc3..f8ceb6c 100644
--- a/configs/Ampe_A76_defconfig
+++ b/configs/Ampe_A76_defconfig
@@ -3,6 +3,7 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
CONFIG_FDTFILE="sun5i-a13-ampe-a76.dtb"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB0_VBUS_PIN="PG12"
+CONFIG_USB0_VBUS_DET="PG01"
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index 680b631..1ef23e4 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -3,6 +3,7 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
CONFIG_FDTFILE="sun4i-a10-chuwi-v7-cw0825.dtb"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB0_VBUS_PIN="PB9"
+CONFIG_USB0_VBUS_DET="PH5"
CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:51000,le:19,ri:300,up:6,lo:31,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
index 204640e..6b784e2 100644
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@@ -6,6 +6,7 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
CONFIG_FDTFILE="sun4i-a10-hyundai-a7hd.dtb"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB0_VBUS_PIN="PB09"
+CONFIG_USB0_VBUS_DET="PH5"
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN="PH6"
CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:45,ri:274,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
diff --git a/configs/Inet_86VS_defconfig b/configs/Inet_86VS_defconfig
index ce9985a..50c073a 100644
--- a/configs/Inet_86VS_defconfig
+++ b/configs/Inet_86VS_defconfig
@@ -3,6 +3,7 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
CONFIG_FDTFILE="sun5i-a13-inet-86vs.dtb"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB0_VBUS_PIN="PG12"
+CONFIG_USB0_VBUS_DET="PG1"
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig
index 7b7b9dd..c22286a 100644
--- a/configs/TZX-Q8-713B7_defconfig
+++ b/configs/TZX-Q8-713B7_defconfig
@@ -3,6 +3,7 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
CONFIG_FDTFILE="sun5i-a13-tzx-q8-713b7.dtb"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB0_VBUS_PIN="PG12"
+CONFIG_USB0_VBUS_DET="PG1"
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig
new file mode 100644
index 0000000..919a467
--- /dev/null
+++ b/configs/UTOO_P66_defconfig
@@ -0,0 +1,21 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
+CONFIG_FDTFILE="sun5i-a13-utoo-p66.dtb"
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PB04"
+CONFIG_USB0_VBUS_DET="PG01"
+CONFIG_VIDEO_LCD_MODE="x:480,y:800,depth:18,pclk_khz:25000,le:2,ri:93,up:2,lo:93,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_POWER="PG4"
+CONFIG_VIDEO_LCD_RESET="PG11"
+CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_VIDEO_LCD_TL059WV5C0=y
++S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++S:CONFIG_MMC0_CD_PIN="PG0"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN5I=y
++S:CONFIG_DRAM_CLK=432
++S:CONFIG_DRAM_ZQ=123
++S:CONFIG_DRAM_EMR1=0
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index ebfec7c..2233545 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -449,11 +449,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
cfg->host_caps = MMC_MODE_4BIT;
- cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
-#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
- defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN9I)
- cfg->host_caps |= MMC_MODE_HC;
-#endif
+ cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
cfg->f_min = 400000;
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index 4646a3d..fe45db1 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -22,7 +22,9 @@
*/
#include <common.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/usbc.h>
+#include <asm-generic/gpio.h>
#include "linux-compat.h"
#include "musb_core.h"
@@ -224,6 +226,33 @@ static int sunxi_musb_init(struct musb *musb)
pr_debug("%s():\n", __func__);
+ if (is_host_enabled(musb)) {
+ int vbus_det = sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
+ if (vbus_det == -1) {
+ eprintf("Error invalid Vusb-det pin\n");
+ return -EINVAL;
+ }
+
+ err = gpio_request(vbus_det, "vbus0_det");
+ if (err)
+ return err;
+
+ err = gpio_direction_input(vbus_det);
+ if (err) {
+ gpio_free(vbus_det);
+ return err;
+ }
+
+ err = gpio_get_value(vbus_det);
+ if (err) {
+ eprintf("Error: A charger is plugged into the OTG\n");
+ gpio_free(vbus_det);
+ return -EIO;
+ }
+
+ gpio_free(vbus_det);
+ }
+
err = sunxi_usbc_request_resources(0);
if (err)
return err;
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index dbda97e..4e12150 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -18,6 +18,7 @@
#include <errno.h>
#include <fdtdec.h>
#include <fdt_support.h>
+#include <i2c.h>
#include <video_fb.h>
#include "videomodes.h"
#include "hitachi_tx18d42vm_lcd.h"
@@ -592,7 +593,7 @@ static void sunxi_lcdc_enable(void)
static void sunxi_lcdc_panel_enable(void)
{
- int pin;
+ int pin, reset_pin;
/*
* Start with backlight disabled to avoid the screen flashing to
@@ -610,6 +611,12 @@ static void sunxi_lcdc_panel_enable(void)
gpio_direction_output(pin, PWM_OFF);
}
+ reset_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_RESET);
+ if (reset_pin != -1) {
+ gpio_request(reset_pin, "lcd_reset");
+ gpio_direction_output(reset_pin, 0); /* Assert reset */
+ }
+
/* Give the backlight some time to turn off and power up the panel. */
mdelay(40);
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_POWER);
@@ -617,6 +624,9 @@ static void sunxi_lcdc_panel_enable(void)
gpio_request(pin, "lcd_power");
gpio_direction_output(pin, 1);
}
+
+ if (reset_pin != -1)
+ gpio_direction_output(reset_pin, 1); /* De-assert reset */
}
static void sunxi_lcdc_backlight_enable(void)
@@ -1021,6 +1031,12 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,
mdelay(50); /* Wait for lcd controller power on */
hitachi_tx18d42vm_init();
}
+ if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) {
+ unsigned int orig_i2c_bus = i2c_get_bus_num();
+ i2c_set_bus_num(CONFIG_VIDEO_LCD_I2C_BUS);
+ i2c_reg_write(0x5c, 0x04, 0x42); /* Turn on the LCD */
+ i2c_set_bus_num(orig_i2c_bus);
+ }
sunxi_composer_mode_set(mode, address);
sunxi_lcdc_tcon0_mode_set(mode, false);
sunxi_composer_enable();
diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h
index 87d269b..1537e53 100644
--- a/include/configs/sun4i.h
+++ b/include/configs/sun4i.h
@@ -13,8 +13,6 @@
*/
#define CONFIG_CLK_FULL_SPEED 1008000000
-#define CONFIG_MACH_TYPE 4104
-
#ifdef CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_SUNXI
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
@@ -25,4 +23,6 @@
*/
#include <configs/sunxi-common.h>
+#define CONFIG_MACH_TYPE (4104 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
+
#endif /* __CONFIG_H */
diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h
index 52e3a6f..e755531 100644
--- a/include/configs/sun5i.h
+++ b/include/configs/sun5i.h
@@ -13,8 +13,6 @@
*/
#define CONFIG_CLK_FULL_SPEED 1008000000
-#define CONFIG_MACH_TYPE 4138
-
#ifdef CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_SUNXI
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
@@ -25,4 +23,6 @@
*/
#include <configs/sunxi-common.h>
+#define CONFIG_MACH_TYPE (4138 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
+
#endif /* __CONFIG_H */
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index 7cd7890..f817f73 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -14,8 +14,6 @@
*/
#define CONFIG_CLK_FULL_SPEED 912000000
-#define CONFIG_MACH_TYPE 4283
-
#ifdef CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_SUNXI
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
@@ -31,4 +29,6 @@
*/
#include <configs/sunxi-common.h>
+#define CONFIG_MACH_TYPE (4283 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
+
#endif /* __CONFIG_H */
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 1238d82..bd7d049 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -13,6 +13,22 @@
#ifndef _SUNXI_COMMON_CONFIG_H
#define _SUNXI_COMMON_CONFIG_H
+#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
+/*
+ * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
+ * expense of restricting some features, so the regular machine id values can
+ * be used.
+ */
+# define CONFIG_MACH_TYPE_COMPAT_REV 0
+#else
+/*
+ * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
+ * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
+ * beyond the machine id check.
+ */
+# define CONFIG_MACH_TYPE_COMPAT_REV 1
+#endif
+
/*
* High Level Configuration Options
*/
@@ -183,6 +199,22 @@
#define CONFIG_SYS_I2C_MVTWSI
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x7f
+
+#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
+#define CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
+#define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */
+#define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */
+/* We use pin names in Kconfig and sunxi_name_to_gpio() */
+#define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda
+#define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl
+#ifndef __ASSEMBLY__
+extern int soft_i2c_gpio_sda;
+extern int soft_i2c_gpio_scl;
+#endif
+#endif
+
#define CONFIG_CMD_I2C
/* PMU */
@@ -194,6 +226,20 @@
#define CONFIG_CONS_INDEX 1 /* UART0 */
#endif
+#if CONFIG_CONS_INDEX == 1
+#ifdef CONFIG_MACH_SUN9I
+#define OF_STDOUT_PATH "/soc/serial@07000000:115200"
+#else
+#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200"
+#endif
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
+#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200"
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
+#define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200"
+#else
+#error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
+#endif
+
/* GPIO */
#define CONFIG_SUNXI_GPIO
#define CONFIG_SPL_GPIO_SUPPORT