summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorYe.Li <B37916@freescale.com>2015-03-26 15:52:37 +0800
committerPeng Fan <Peng.Fan@freescale.com>2015-04-29 15:04:25 +0800
commitd2977725c247696598c3c2e4c37c91c3574a1896 (patch)
treed21a47f300dc45c20fa788eea0a34fa7f90c4d61
parenta6da6653a6d1bc953469b1c133421bd9f5acbac1 (diff)
downloadu-boot-imx-d2977725c247696598c3c2e4c37c91c3574a1896.zip
u-boot-imx-d2977725c247696598c3c2e4c37c91c3574a1896.tar.gz
u-boot-imx-d2977725c247696598c3c2e4c37c91c3574a1896.tar.bz2
MLK-10477-4 imx: mx7d 12x12 lpddr3 ARM2: Add EPDC support
To enable the EPDC feature: 1. Uncomments CONFIG_SPLASH_SCREEN and CONFIG_MXC_EPDC settings in mx7d_12x12_lpddr3_arm2.h 2. cd <kernel_dir>/firmware/imx 3. python ihex2bin.py -i epdc_ED060XD4C1_TC.fw.ihex -o epdc_splash.bin 4. cp epdc_splash.bin to [FAT partition on SD card] Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 414824dcb77a067213849d340cf92777e6546810)
-rw-r--r--board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c257
-rw-r--r--include/configs/mx7d_12x12_lpddr3_arm2.h2
-rw-r--r--include/configs/mx7d_arm2.h29
3 files changed, 286 insertions, 2 deletions
diff --git a/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c b/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c
index b8086ff..0770818 100644
--- a/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c
+++ b/board/freescale/mx7d_12x12_lpddr3_arm2/mx7d_12x12_lpddr3_arm2.c
@@ -31,6 +31,10 @@
#include <linux/fb.h>
#include <mxsfb.h>
#endif
+#if defined(CONFIG_MXC_EPDC)
+#include <lcd.h>
+#include <mxc_epdc_fb.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -59,6 +63,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define SPI_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
+#define EPDC_PAD_CTRL 0x0
+
#ifdef CONFIG_SYS_I2C_MXC
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/* I2C1 for PMIC */
@@ -554,6 +560,253 @@ int board_early_init_f(void)
return 0;
}
+#ifdef CONFIG_MXC_EPDC
+static iomux_v3_cfg_t const epdc_enable_pads[] = {
+ MX7D_PAD_EPDC_DATA00__EPDC_DATA0 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_DATA01__EPDC_DATA1 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_DATA02__EPDC_DATA2 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_DATA03__EPDC_DATA3 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_DATA04__EPDC_DATA4 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_DATA05__EPDC_DATA5 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_DATA06__EPDC_DATA6 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_DATA07__EPDC_DATA7 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_SDLE__EPDC_SDLE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_SDOE__EPDC_SDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_GDOE__EPDC_GDOE | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_GDRL__EPDC_GDRL | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_GDSP__EPDC_GDSP | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_BDR0__EPDC_BDR0 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+ MX7D_PAD_EPDC_BDR1__EPDC_BDR1 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const epdc_disable_pads[] = {
+ MX7D_PAD_EPDC_DATA00__GPIO2_IO0,
+ MX7D_PAD_EPDC_DATA01__GPIO2_IO1,
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2,
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3,
+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4,
+ MX7D_PAD_EPDC_DATA05__GPIO2_IO5,
+ MX7D_PAD_EPDC_DATA06__GPIO2_IO6,
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7,
+ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16,
+ MX7D_PAD_EPDC_SDLE__GPIO2_IO17,
+ MX7D_PAD_EPDC_SDOE__GPIO2_IO18,
+ MX7D_PAD_EPDC_SDSHR__GPIO2_IO19,
+ MX7D_PAD_EPDC_SDCE0__GPIO2_IO20,
+ MX7D_PAD_EPDC_SDCE1__GPIO2_IO21,
+ MX7D_PAD_EPDC_SDCE2__GPIO2_IO22,
+ MX7D_PAD_EPDC_SDCE3__GPIO2_IO23,
+ MX7D_PAD_EPDC_GDCLK__GPIO2_IO24,
+ MX7D_PAD_EPDC_GDOE__GPIO2_IO25,
+ MX7D_PAD_EPDC_GDRL__GPIO2_IO26,
+ MX7D_PAD_EPDC_GDSP__GPIO2_IO27,
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28,
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29,
+};
+
+vidinfo_t panel_info = {
+ .vl_refresh = 85,
+ .vl_col = 1024,
+ .vl_row = 758,
+ .vl_pixclock = 40000000,
+ .vl_left_margin = 12,
+ .vl_right_margin = 76,
+ .vl_upper_margin = 4,
+ .vl_lower_margin = 5,
+ .vl_hsync = 12,
+ .vl_vsync = 2,
+ .vl_sync = 0,
+ .vl_mode = 0,
+ .vl_flag = 0,
+ .vl_bpix = 3,
+ .cmap = 0,
+};
+
+struct epdc_timing_params panel_timings = {
+ .vscan_holdoff = 4,
+ .sdoed_width = 10,
+ .sdoed_delay = 20,
+ .sdoez_width = 10,
+ .sdoez_delay = 20,
+ .gdclk_hp_offs = 524,
+ .gdsp_offs = 327,
+ .gdoe_offs = 0,
+ .gdclk_offs = 19,
+ .num_ce = 1,
+};
+
+static void setup_epdc_power(void)
+{
+ /* IOMUX_GPR1: bit30: Disable On-chip RAM EPDC Function */
+ struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
+ = (struct iomuxc_gpr_base_regs *) IOMUXC_GPR_BASE_ADDR;
+
+ clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
+ IOMUXC_GPR_GPR1_GPR_ENABLE_OCRAM_EPDC_MASK, 0);
+
+ /* Setup epdc voltage */
+
+ /* EPDC_PWRSTAT - GPIO2[31] for PWR_GOOD status */
+ imx_iomux_v3_setup_pad(MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+ gpio_direction_input(IMX_GPIO_NR(2, 31));
+
+ /* EPDC_VCOM0 - GPIO4[14] for VCOM control */
+ imx_iomux_v3_setup_pad(MX7D_PAD_I2C4_SCL__GPIO4_IO14 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* Set as output */
+ gpio_direction_output(IMX_GPIO_NR(4, 14), 1);
+
+ /* EPDC_PWRWAKEUP - GPIO4[23] for EPD PMIC WAKEUP */
+ imx_iomux_v3_setup_pad(MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+ /* Set as output */
+ gpio_direction_output(IMX_GPIO_NR(4, 23), 1);
+
+ /* EPDC_PWRCTRL0 - GPIO4[20] for EPD PWR CTL0 */
+ imx_iomux_v3_setup_pad(MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+ /* Set as output */
+ gpio_direction_output(IMX_GPIO_NR(4, 20), 1);
+}
+
+int setup_waveform_file(ulong waveform_buf)
+{
+ char *fs_argv[5];
+ char addr[17];
+ ulong file_len, mmc_dev;
+
+ if (!check_mmc_autodetect())
+ mmc_dev = getenv_ulong("mmcdev", 10, 0);
+ else
+ mmc_dev = mmc_get_env_devno();
+
+ sprintf(addr, "%lx", waveform_buf);
+
+ fs_argv[0] = "fatload";
+ fs_argv[1] = "mmc";
+ fs_argv[2] = simple_itoa(mmc_dev);
+ fs_argv[3] = addr;
+ fs_argv[4] = getenv("epdc_waveform");
+
+ if (!fs_argv[4])
+ fs_argv[4] = "epdc_splash.bin";
+
+ if (do_fat_fsload(NULL, 0, 5, fs_argv)) {
+ printf("File %s not found on MMC Device %lu \n", fs_argv[4], mmc_dev);
+ return -1;
+ }
+
+ file_len = getenv_hex("filesize", 0);
+ if (!file_len)
+ return -1;
+
+ flush_cache((ulong)addr, file_len);
+
+ return 0;
+}
+
+static void epdc_enable_pins(void)
+{
+ /* epdc iomux settings */
+ imx_iomux_v3_setup_multiple_pads(epdc_enable_pads,
+ ARRAY_SIZE(epdc_enable_pads));
+}
+
+static void epdc_disable_pins(void)
+{
+ /* Configure MUX settings for EPDC pins to GPIO and drive to 0 */
+ imx_iomux_v3_setup_multiple_pads(epdc_disable_pads,
+ ARRAY_SIZE(epdc_disable_pads));
+}
+
+static void setup_epdc(void)
+{
+ /*** epdc Maxim PMIC settings ***/
+
+ /* EPDC_PWRSTAT - GPIO2[31] for PWR_GOOD status */
+ imx_iomux_v3_setup_pad(MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* EPDC_VCOM0 - GPIO4[14] for VCOM control */
+ imx_iomux_v3_setup_pad(MX7D_PAD_I2C4_SCL__GPIO4_IO14 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* EPDC_PWRWAKEUP - GPIO4[23] for EPD PMIC WAKEUP */
+ imx_iomux_v3_setup_pad(MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* EPDC_PWRCTRL0 - GPIO4[20] for EPD PWR CTL0 */
+ imx_iomux_v3_setup_pad(MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 |
+ MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+ /* Set pixel clock rates for EPDC in clock.c */
+
+ panel_info.epdc_data.wv_modes.mode_init = 0;
+ panel_info.epdc_data.wv_modes.mode_du = 1;
+ panel_info.epdc_data.wv_modes.mode_gc4 = 3;
+ panel_info.epdc_data.wv_modes.mode_gc8 = 2;
+ panel_info.epdc_data.wv_modes.mode_gc16 = 2;
+ panel_info.epdc_data.wv_modes.mode_gc32 = 2;
+
+ panel_info.epdc_data.epdc_timings = panel_timings;
+
+ setup_epdc_power();
+}
+
+void epdc_power_on(void)
+{
+ unsigned int reg;
+ struct gpio_regs *gpio_regs = (struct gpio_regs *)GPIO2_BASE_ADDR;
+
+ /* Set EPD_PWR_CTL0 to high - enable EINK_VDD (3.15) */
+ gpio_set_value(IMX_GPIO_NR(4, 20), 1);
+ udelay(1000);
+
+ /* Enable epdc signal pin */
+ epdc_enable_pins();
+
+ /* Set PMIC Wakeup to high - enable Display power */
+ gpio_set_value(IMX_GPIO_NR(4, 23), 1);
+
+ /* Wait for PWRGOOD == 1 */
+ while (1) {
+ reg = readl(&gpio_regs->gpio_psr);
+ if (!(reg & (1 << 31)))
+ break;
+
+ udelay(100);
+ }
+
+ /* Enable VCOM */
+ gpio_set_value(IMX_GPIO_NR(4, 14), 1);
+
+ udelay(500);
+}
+
+void epdc_power_off(void)
+{
+ /* Set PMIC Wakeup to low - disable Display power */
+ gpio_set_value(IMX_GPIO_NR(4, 23), 0);
+
+ /* Disable VCOM */
+ gpio_set_value(IMX_GPIO_NR(4, 14), 0);
+
+ epdc_disable_pins();
+
+ /* Set EPD_PWR_CTL0 to low - disable EINK_VDD (3.15) */
+ gpio_set_value(IMX_GPIO_NR(4, 20), 0);
+}
+#endif
+
int board_init(void)
{
/* address of boot parameters */
@@ -578,6 +831,10 @@ int board_init(void)
board_qspi_init();
#endif
+#ifdef CONFIG_MXC_EPDC
+ setup_epdc();
+#endif
+
return 0;
}
diff --git a/include/configs/mx7d_12x12_lpddr3_arm2.h b/include/configs/mx7d_12x12_lpddr3_arm2.h
index f0fa30d..ece93b1 100644
--- a/include/configs/mx7d_12x12_lpddr3_arm2.h
+++ b/include/configs/mx7d_12x12_lpddr3_arm2.h
@@ -63,6 +63,8 @@
#endif
#define CONFIG_VIDEO
+/* #define CONFIG_SPLASH_SCREEN*/
+/* #define CONFIG_MXC_EPDC*/
#include "mx7d_arm2.h"
diff --git a/include/configs/mx7d_arm2.h b/include/configs/mx7d_arm2.h
index 118e94c..bb4fd60 100644
--- a/include/configs/mx7d_arm2.h
+++ b/include/configs/mx7d_arm2.h
@@ -98,7 +98,7 @@
"m4image=m4_qspi.bin\0" \
"loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
"update_m4_from_sd=" \
- "if sf probe 1:0; then " \
+ "if sf probe 0:1; then " \
"if run loadm4image; then " \
"setexpr fw_sz ${filesize} + 0xffff; " \
"setexpr fw_sz ${fw_sz} / 0x10000; " \
@@ -107,7 +107,7 @@
"sf write ${loadaddr} 0x0 ${filesize}; " \
"fi; " \
"fi\0" \
- "m4boot=sf probe 1:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
+ "m4boot=sf probe 0:1; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
#else
#define UPDATE_M4_ENV ""
#endif
@@ -121,6 +121,13 @@
#define CONFIG_VIDEO_MODE ""
#endif
+#ifdef CONFIG_MXC_EPDC
+#define CONFIG_EPDC_WAVEFORM_FILE \
+ "epdc_waveform=epdc_splash.bin\0"
+#else
+#define CONFIG_EPDC_WAVEFORM_FILE ""
+#endif
+
#define CONFIG_MFG_ENV_SETTINGS \
"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
"rdinit=/linuxrc " \
@@ -136,6 +143,7 @@
CONFIG_MFG_ENV_SETTINGS \
UPDATE_M4_ENV \
CONFIG_VIDEO_MODE \
+ CONFIG_EPDC_WAVEFORM_FILE \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc0\0" \
@@ -318,6 +326,23 @@
#define CONFIG_VIDEO_BMP_LOGO
#endif
+#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_MXC_EPDC)
+/*
+ * Framebuffer and LCD
+ */
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_CMD_BMP
+#define CONFIG_LCD
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#undef LCD_TEST_PATTERN
+/* #define CONFIG_SPLASH_IS_IN_MMC 1 */
+#define LCD_BPP LCD_MONOCHROME
+/* #define CONFIG_SPLASH_SCREEN_ALIGN 1 */
+
+#define CONFIG_WAVEFORM_BUF_SIZE 0x400000
+#endif
+
/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI