summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-02-09 20:51:26 +0000
committerwdenk <wdenk>2004-02-09 20:51:26 +0000
commitb98fff1d6acc57cc54f01740028535ac095237cd (patch)
tree4d9f375a71582a8938e034dcf9082b8f71761b72
parent5653fc335a450fa46d89989e1afe5e8bb9a0a52e (diff)
downloadu-boot-imx-b98fff1d6acc57cc54f01740028535ac095237cd.zip
u-boot-imx-b98fff1d6acc57cc54f01740028535ac095237cd.tar.gz
u-boot-imx-b98fff1d6acc57cc54f01740028535ac095237cd.tar.bz2
* Patch by Rahul Shanbhag, 28 Jan 2004:
Fix flash protection/locking handling for OMAP1610 innovator board. * Patch by Rolf Peukert, 28 Jan 2004: fix flash write problems on CSB226 board (write with 32 bit bus width) * Patches by Mark Jonas, 16 Jan 2004: - fix rounding error when calculating baudrates for MPC5200 PSCs - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same time which is not supported
-rw-r--r--CHANGELOG11
-rw-r--r--board/csb226/flash.c156
-rw-r--r--board/omap1610inn/flash.c16
-rw-r--r--cpu/mpc5xxx/serial.c8
-rw-r--r--cpu/mpc5xxx/start.S3
5 files changed, 107 insertions, 87 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 2359b48..588c112 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,17 @@
Changes since U-Boot 1.0.1:
======================================================================
+* Patch by Rahul Shanbhag, 28 Jan 2004:
+ Fix flash protection/locking handling for OMAP1610 innovator board.
+
+* Patch by Rolf Peukert, 28 Jan 2004:
+ fix flash write problems on CSB226 board (write with 32 bit bus width)
+
+* Patches by Mark Jonas, 16 Jan 2004:
+ - fix rounding error when calculating baudrates for MPC5200 PSCs
+ - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
+ time which is not supported
+
* Patch by Yuli Barcohen, 26 Jan 2004:
Allow bzip2 compression for small memory footprint boards
diff --git a/board/csb226/flash.c b/board/csb226/flash.c
index 6b0e51a..f6dfd96 100644
--- a/board/csb226/flash.c
+++ b/board/csb226/flash.c
@@ -9,6 +9,9 @@
* (C) Copyright 2002
* Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
*
+ * (C) Copyright 2003 (2 x 16 bit Flash bank patches)
+ * Rolf Peukert, IMMS gGmbH, <rolf.peukert@imms.de>
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -19,7 +22,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -32,9 +35,9 @@
#include <asm/arch/pxa-regs.h>
#define FLASH_BANK_SIZE 0x02000000
-#define MAIN_SECT_SIZE 0x40000 /* 2x16 = 256k per sector */
+#define MAIN_SECT_SIZE 0x40000 /* 2x16 = 256k per sector */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
/**
@@ -51,19 +54,19 @@ ulong flash_init(void)
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
+ (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
switch (i) {
- case 0:
- flashbase = PHYS_FLASH_1;
- break;
- default:
- panic("configured too many flash banks!\n");
- break;
+ case 0:
+ flashbase = PHYS_FLASH_1;
+ break;
+ default:
+ panic("configured too many flash banks!\n");
+ break;
}
for (j = 0; j < flash_info[i].sector_count; j++) {
flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
@@ -88,8 +91,6 @@ ulong flash_init(void)
/**
* flash_print_info: - print information about the flash situation
- *
- * @param info:
*/
void flash_print_info (flash_info_t *info)
@@ -99,23 +100,21 @@ void flash_print_info (flash_info_t *info)
for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
switch (info->flash_id & FLASH_VENDMASK) {
-
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf("Intel: ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
+ case (INTEL_MANUFACT & FLASH_VENDMASK):
+ printf ("Intel: ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
-
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf("28F128J3 (128Mbit)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- return;
+ case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
+ printf("28F128J3 (128Mbit)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ return;
}
printf(" Size: %ld MB in %d Sectors\n",
@@ -123,10 +122,10 @@ void flash_print_info (flash_info_t *info)
printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) printf ("\n ");
+ if ((i % 5) == 0) printf ("\n ");
printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
+ info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
info++;
@@ -136,7 +135,6 @@ void flash_print_info (flash_info_t *info)
/**
* flash_erase: - erase flash sectors
- *
*/
int flash_erase(flash_info_t *info, int s_first, int s_last)
@@ -179,13 +177,13 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
/* arm simple, non interrupt dependent timer */
reset_timer_masked();
- if (info->protect[sect] == 0) { /* not protected */
+ if (info->protect[sect] == 0) { /* not protected */
u32 * volatile addr = (u32 * volatile)(info->start[sect]);
- /* erase sector: */
+ /* erase sector: */
/* The strata flashs are aligned side by side on */
/* the data bus, so we have to write the commands */
- /* to both chips here: */
+ /* to both chips here: */
*addr = 0x00200020; /* erase setup */
*addr = 0x00D000D0; /* erase confirm */
@@ -198,19 +196,14 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
goto outahere;
}
}
-
*addr = 0x00500050; /* clear status register cmd. */
- *addr = 0x00FF00FF; /* resest to read mode */
-
+ *addr = 0x00FF00FF; /* reset to read mode */
}
-
printf("ok.\n");
}
-
if (ctrlc()) printf("User Interrupt!\n");
- outahere:
-
+outahere:
/* allow flash to settle - wait 10 ms */
udelay_masked(10000);
@@ -219,22 +212,19 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
return rc;
}
-
/**
- * write_word: - copy memory to flash
- *
- * @param info:
- * @param dest:
- * @param data:
- * @return:
+ * write_long: - copy memory to flash, assume a bank of 2 devices with 16bit each
*/
-static int write_word (flash_info_t *info, ulong dest, ushort data)
+static int write_long (flash_info_t *info, ulong dest, ulong data)
{
u32 * volatile addr = (u32 * volatile)dest, val;
int rc = ERR_OK;
int flag;
+ /* read array command - just for the case... */
+ *addr = 0x00FF00FF;
+
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) return ERR_NOT_ERASED;
@@ -248,10 +238,10 @@ static int write_word (flash_info_t *info, ulong dest, ushort data)
flag = disable_interrupts();
/* clear status register command */
- *addr = 0x50;
+ *addr = 0x00500050;
/* program set-up command */
- *addr = 0x40;
+ *addr = 0x00400040;
/* latch address/data */
*addr = data;
@@ -260,28 +250,30 @@ static int write_word (flash_info_t *info, ulong dest, ushort data)
reset_timer_masked();
/* wait while polling the status register */
- while(((val = *addr) & 0x80) != 0x80) {
+ while(((val = *addr) & 0x00800080) != 0x00800080) {
if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
rc = ERR_TIMOUT;
- *addr = 0xB0; /* suspend program command */
+ /* suspend program command */
+ *addr = 0x00B000B0;
goto outahere;
}
}
- if(val & 0x1A) { /* check for error */
+ /* check for errors */
+ if(val & 0x001A001A) {
printf("\nFlash write error %02x at address %08lx\n",
(int)val, (unsigned long)dest);
- if(val & (1<<3)) {
+ if(val & 0x00080008) {
printf("Voltage range error.\n");
rc = ERR_PROG_ERROR;
goto outahere;
}
- if(val & (1<<1)) {
+ if(val & 0x00020002) {
printf("Device protect error.\n");
rc = ERR_PROTECTED;
goto outahere;
}
- if(val & (1<<4)) {
+ if(val & 0x00100010) {
printf("Programming error.\n");
rc = ERR_PROG_ERROR;
goto outahere;
@@ -290,9 +282,9 @@ static int write_word (flash_info_t *info, ulong dest, ushort data)
goto outahere;
}
- outahere:
-
- *addr = 0xFF; /* read array command */
+outahere:
+ /* read array command */
+ *addr = 0x00FF00FF;
if (flag) enable_interrupts();
return rc;
@@ -304,20 +296,21 @@ static int write_word (flash_info_t *info, ulong dest, ushort data)
*
* @param info:
* @param src: source of copy transaction
- * @param addr: where to copy to
- * @param cnt: number of bytes to copy
+ * @param addr: where to copy to
+ * @param cnt: number of bytes to copy
*
* @return error code
*/
+/* "long" version, uses 32bit words */
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp;
- ushort data;
+ ulong data;
int l;
int i, rc;
- wp = (addr & ~1); /* get lower word aligned address */
+ wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
@@ -325,35 +318,34 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
if ((l = addr - wp) != 0) {
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
+ data = (data >> 8) | (*(uchar *)cp << 24);
}
- for (; i<2 && cnt>0; ++i) {
- data = (data >> 8) | (*src++ << 8);
+ for (; i<4 && cnt>0; ++i) {
+ data = (data >> 8) | (*src++ << 24);
--cnt;
++cp;
}
- for (; cnt==0 && i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *)cp << 24);
}
- if ((rc = write_word(info, wp, data)) != 0) {
+ if ((rc = write_long(info, wp, data)) != 0) {
return (rc);
}
- wp += 2;
+ wp += 4;
}
/*
* handle word aligned part
*/
- while (cnt >= 2) {
- /* data = *((vushort*)src); */
- data = *((ushort*)src);
- if ((rc = write_word(info, wp, data)) != 0) {
+ while (cnt >= 4) {
+ data = *((ulong*)src);
+ if ((rc = write_long(info, wp, data)) != 0) {
return (rc);
}
- src += 2;
- wp += 2;
- cnt -= 2;
+ src += 4;
+ wp += 4;
+ cnt -= 4;
}
if (cnt == 0) return ERR_OK;
@@ -362,13 +354,13 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
* handle unaligned tail bytes
*/
data = 0;
- for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data >> 8) | (*src++ << 24);
--cnt;
}
- for (; i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
+ for (; i<4; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *)cp << 24);
}
- return write_word(info, wp, data);
+ return write_long(info, wp, data);
}
diff --git a/board/omap1610inn/flash.c b/board/omap1610inn/flash.c
index e7d6515..ae7fb3b 100644
--- a/board/omap1610inn/flash.c
+++ b/board/omap1610inn/flash.c
@@ -93,6 +93,8 @@ unsigned long flash_init (void)
case 0:
flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+ /* to reset the lock bit */
+ flash_unlock(&flash_info[i]);
break;
default:
panic ("configured too many flash banks!\n");
@@ -116,6 +118,19 @@ unsigned long flash_init (void)
/*-----------------------------------------------------------------------
*/
+flash_unlock(flash_info_t * info)
+{
+ int j;
+ for (j=2;j<CFG_MAX_FLASH_SECT;j++){
+ FPWV *addr = (FPWV *) (info->start[j]);
+ flash_unprotect_sectors (addr);
+ *addr = (FPW) 0x00500050;/* clear status register */
+ *addr = (FPW) 0x00FF00FF;/* resest to read mode */
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
static void flash_get_offsets (ulong base, flash_info_t * info)
{
int i;
@@ -447,7 +462,6 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
return (2);
}
- flash_unprotect_sectors (addr);
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
*addr = (FPW) 0x00400040; /* write setup */
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index 54ecf5b..f463d2c 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -67,10 +67,10 @@ int serial_init (void)
/* select clock sources */
#if defined(CONFIG_MGT5100)
psc->psc_clock_select = 0xdd00;
- baseclk = CFG_MPC5XXX_CLKIN / 32;
+ baseclk = (CFG_MPC5XXX_CLKIN + 16) / 32;
#elif defined(CONFIG_MPC5200)
psc->psc_clock_select = 0;
- baseclk = gd->ipb_clk / 32;
+ baseclk = (gd->ipb_clk + 16) / 32;
#endif
/* switch to UART mode */
@@ -85,8 +85,8 @@ int serial_init (void)
psc->mode = PSC_MODE_ONE_STOP;
/* set up UART divisor */
- div = baseclk / gd->baudrate;
- psc->ctur = div >> 8;
+ div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
+ psc->ctur = (div >> 8) & 0xff;
psc->ctlr = div & 0xff;
/* disable all interrupts */
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
index a001e1c..26811e1 100644
--- a/cpu/mpc5xxx/start.S
+++ b/cpu/mpc5xxx/start.S
@@ -104,6 +104,9 @@ boot_warm:
mfmsr r5 /* save msr contents */
#if defined(CFG_LOWBOOT)
+#if defined(CFG_RAMBOOT)
+#error CFG_LOWBOOT is incompatible with CFG_RAMBOOT
+#endif /* CFG_RAMBOOT */
lis r4, CFG_DEFAULT_MBAR@h
lis r3, 0x0000FF00@h
ori r3, r3, 0x0000FF00@l