Merge with /home/mk/8-benq/u-boot

9 files changed, 866 insertions, 89 deletions

diff --git a/board/delta/delta.c b/board/delta/delta.c
index b7671dd..b127ac8 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -28,6 +28,8 @@
 #include <common.h>
 #include <i2c.h>
 #include <da9030.h>
+#include <malloc.h>
+#include <command.h>
 #include <asm/arch/pxa-regs.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -35,6 +37,9 @@ DECLARE_GLOBAL_DATA_PTR;
 /* ------------------------------------------------------------------------- */
 
 static void init_DA9030(void);
+static void keys_init(void);
+static void get_pressed_keys(uchar *s);
+static uchar *key_match(uchar *kbd_data);
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -56,13 +61,216 @@ int board_init (void)
 
 int board_late_init(void)
 {
+#ifdef DELTA_CHECK_KEYBD
+	uchar kbd_data[KEYBD_DATALEN];
+	char keybd_env[2 * KEYBD_DATALEN + 1];
+	char *str;
+	int i;
+#endif /* DELTA_CHECK_KEYBD */
+
 	setenv("stdout", "serial");
 	setenv("stderr", "serial");
+
+#ifdef DELTA_CHECK_KEYBD
+	keys_init();
+
+	memset(kbd_data, '\0', KEYBD_DATALEN);
+
+	/* check for pressed keys and setup keybd_env */
+	get_pressed_keys(kbd_data);
+
+	for (i = 0; i < KEYBD_DATALEN; ++i) {
+		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
+	}
+	setenv ("keybd", keybd_env);
+
+	str = strdup ((char *)key_match (kbd_data));	/* decode keys */
+
+# ifdef CONFIG_PREBOOT	/* automatically configure "preboot" command on key match */
+	setenv ("preboot", str);	/* set or delete definition */
+# endif /* CONFIG_PREBOOT */
+	if (str != NULL) {
+		free (str);
+	}
+#endif /* DELTA_CHECK_KEYBD */
+
 	init_DA9030();
 	return 0;
 }
 
 
+/*
+ * Magic Key Handling, mainly copied from board/lwmon/lwmon.c
+ */
+#ifdef DELTA_CHECK_KEYBD
+
+static uchar kbd_magic_prefix[] = "key_magic";
+static uchar kbd_command_prefix[] = "key_cmd";
+
+/*
+ * Get pressed keys
+ * s is a buffer of size KEYBD_DATALEN-1
+ */
+static void get_pressed_keys(uchar *s)
+{
+	unsigned long val;
+	val = GPLR3;
+
+	if(val & (1<<31))
+		*s++ = KEYBD_KP_DKIN0;
+	if(val & (1<<18))
+		*s++ = KEYBD_KP_DKIN1;
+	if(val & (1<<29))
+		*s++ = KEYBD_KP_DKIN2;
+	if(val & (1<<22))
+		*s++ = KEYBD_KP_DKIN5;
+}
+
+static void keys_init()
+{
+	CKENB |= CKENB_7_GPIO;
+	udelay(100);
+
+	/* Configure GPIOs */
+	GPIO127 = 0xa840;	/* KP_DKIN0 */
+	GPIO114 = 0xa840;	/* KP_DKIN1 */
+	GPIO125 = 0xa840;	/* KP_DKIN2 */
+	GPIO118 = 0xa840;	/* KP_DKIN5 */
+
+	/* Configure GPIOs as inputs */
+	GPDR3 &= ~(1<<31 | 1<<18 | 1<<29 | 1<<22);
+	GCDR3 = (1<<31 | 1<<18 | 1<<29 | 1<<22);
+
+	udelay(100);
+}
+
+static int compare_magic (uchar *kbd_data, uchar *str)
+{
+	/* uchar compare[KEYBD_DATALEN-1]; */
+	uchar compare[KEYBD_DATALEN];
+	char *nxt;
+	int i;
+
+	/* Don't include modifier byte */
+	/* memcpy (compare, kbd_data+1, KEYBD_DATALEN-1); */
+	memcpy (compare, kbd_data, KEYBD_DATALEN);
+
+	for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) {
+		uchar c;
+		int k;
+
+		c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16);
+
+		if (str == (uchar *)nxt) {	/* invalid character */
+			break;
+		}
+
+		/*
+		 * Check if this key matches the input.
+		 * Set matches to zero, so they match only once
+		 * and we can find duplicates or extra keys
+		 */
+		for (k = 0; k < sizeof(compare); ++k) {
+			if (compare[k] == '\0')	/* only non-zero entries */
+				continue;
+			if (c == compare[k]) {	/* found matching key */
+				compare[k] = '\0';
+				break;
+			}
+		}
+		if (k == sizeof(compare)) {
+			return -1;		/* unmatched key */
+		}
+	}
+
+	/*
+	 * A full match leaves no keys in the `compare' array,
+	 */
+	for (i = 0; i < sizeof(compare); ++i) {
+		if (compare[i])
+		{
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+
+static uchar *key_match (uchar *kbd_data)
+{
+	char magic[sizeof (kbd_magic_prefix) + 1];
+	uchar *suffix;
+	char *kbd_magic_keys;
+
+	/*
+	 * The following string defines the characters that can pe appended
+	 * to "key_magic" to form the names of environment variables that
+	 * hold "magic" key codes, i. e. such key codes that can cause
+	 * pre-boot actions. If the string is empty (""), then only
+	 * "key_magic" is checked (old behaviour); the string "125" causes
+	 * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
+	 */
+	if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
+		kbd_magic_keys = "";
+
+	/* loop over all magic keys;
+	 * use '\0' suffix in case of empty string
+	 */
+	for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) {
+		sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
+#if 0
+		printf ("### Check magic \"%s\"\n", magic);
+#endif
+		if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) {
+			char cmd_name[sizeof (kbd_command_prefix) + 1];
+			char *cmd;
+
+			sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
+
+			cmd = getenv (cmd_name);
+#if 0
+			printf ("### Set PREBOOT to $(%s): \"%s\"\n",
+				cmd_name, cmd ? cmd : "<<NULL>>");
+#endif
+			*kbd_data = *suffix;
+			return ((uchar *)cmd);
+		}
+	}
+#if 0
+	printf ("### Delete PREBOOT\n");
+#endif
+	*kbd_data = '\0';
+	return (NULL);
+}
+
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	uchar kbd_data[KEYBD_DATALEN];
+	char keybd_env[2 * KEYBD_DATALEN + 1];
+	int i;
+
+	/* Read keys */
+	get_pressed_keys(kbd_data);
+	puts ("Keys:");
+	for (i = 0; i < KEYBD_DATALEN; ++i) {
+		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
+		printf (" %02x", kbd_data[i]);
+	}
+	putc ('\n');
+	setenv ("keybd", keybd_env);
+	return 0;
+}
+
+U_BOOT_CMD(
+	   kbd,	1,	1,	do_kbd,
+	   "kbd     - read keyboard status\n",
+	   NULL
+);
+
+#endif /* DELTA_CHECK_KEYBD */
+
+
 int dram_init (void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
diff --git a/board/zylonite/Makefile b/board/zylonite/Makefile
index 999647f..f3ad674 100644
--- a/board/zylonite/Makefile
+++ b/board/zylonite/Makefile
@@ -1,4 +1,3 @@
-
 #
 # (C) Copyright 2000
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -21,12 +20,11 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-
 include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	:= zylonite.o flash.o
+OBJS	:= zylonite.o nand.o
 SOBJS	:= lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
diff --git a/board/zylonite/config.mk b/board/zylonite/config.mk
index 09b0f71..b5d5955 100644
--- a/board/zylonite/config.mk
+++ b/board/zylonite/config.mk
@@ -2,3 +2,5 @@
 #TEXT_BASE = 0xa1700000
 #TEXT_BASE = 0xa3080000
 TEXT_BASE = 0xa3008000
+
+BOARDLIBS = drivers/nand/libnand.a
diff --git a/board/zylonite/lowlevel_init.S b/board/zylonite/lowlevel_init.S
index c3bb4eb..da01765 100644
--- a/board/zylonite/lowlevel_init.S
+++ b/board/zylonite/lowlevel_init.S
@@ -235,6 +235,7 @@ mem_init:
 	orr		r1, r1, #0x40000000	@ enable SDRAM for Normal Access
 	str		r1, [r0]
 
+#ifndef CFG_SKIP_DRAM_SCRUB
 	/* scrub/init SDRAM if enabled/present */
 /*	ldr	r11, =0xa0000000 /\* base address of SDRAM (CFG_DRAM_BASE) *\/ */
 /*	ldr	r12, =0x04000000 /\* size of memory to scrub (CFG_DRAM_SIZE) *\/ */
@@ -254,6 +255,7 @@ mem_init:
 	stmia	r8!, {r0-r7}
 	beq	15f
 	b	10b
+#endif /* CFG_SKIP_DRAM_SCRUB */
 
 15:
 	/* Mask all interrupts */
diff --git a/board/zylonite/nand.c b/board/zylonite/nand.c
new file mode 100644
index 0000000..5d2cd65
--- /dev/null
+++ b/board/zylonite/nand.c
@@ -0,0 +1,584 @@
+/*
+ * (C) Copyright 2006 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#ifdef CONFIG_NEW_NAND_CODE
+
+#include <nand.h>
+#include <asm/arch/pxa-regs.h>
+
+#ifdef CFG_DFC_DEBUG1
+# define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
+#else
+# define DFC_DEBUG1(fmt, args...)
+#endif
+
+#ifdef CFG_DFC_DEBUG2
+# define DFC_DEBUG2(fmt, args...) printf(fmt, ##args)
+#else
+# define DFC_DEBUG2(fmt, args...)
+#endif
+
+#ifdef CFG_DFC_DEBUG3
+# define DFC_DEBUG3(fmt, args...) printf(fmt, ##args)
+#else
+# define DFC_DEBUG3(fmt, args...)
+#endif
+
+#define MIN(x, y)		((x < y) ? x : y)
+
+/* These really don't belong here, as they are specific to the NAND Model */
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr delta_bbt_descr = {
+	.options = 0,
+	.offs = 0,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static struct nand_oobinfo delta_oob = {
+	.useecc = MTD_NANDECC_AUTOPL_USR, /* MTD_NANDECC_PLACEONLY, */
+	.eccbytes = 6,
+	.eccpos = {2, 3, 4, 5, 6, 7},
+	.oobfree = { {8, 2}, {12, 4} }
+};
+
+
+/*
+ * not required for Monahans DFC
+ */
+static void dfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+	return;
+}
+
+#if 0
+/* read device ready pin */
+static int dfc_device_ready(struct mtd_info *mtdinfo)
+{
+	if(NDSR & NDSR_RDY)
+		return 1;
+	else
+		return 0;
+	return 0;
+}
+#endif
+
+/*
+ * Write buf to the DFC Controller Data Buffer
+ */
+static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	unsigned long bytes_multi = len & 0xfffffffc;
+	unsigned long rest = len & 0x3;
+	unsigned long *long_buf;
+	int i;
+
+	DFC_DEBUG2("dfc_write_buf: writing %d bytes starting with 0x%x.\n", len, *((unsigned long*) buf));
+	if(bytes_multi) {
+		for(i=0; i<bytes_multi; i+=4) {
+			long_buf = (unsigned long*) &buf[i];
+			NDDB = *long_buf;
+		}
+	}
+	if(rest) {
+		printf("dfc_write_buf: ERROR, writing non 4-byte aligned data.\n");
+	}
+	return;
+}
+
+
+/*
+ * These functions are quite problematic for the DFC. Luckily they are
+ * not used in the current nand code, except for nand_command, which
+ * we've defined our own anyway. The problem is, that we always need
+ * to write 4 bytes to the DFC Data Buffer, but in these functions we
+ * don't know if to buffer the bytes/half words until we've gathered 4
+ * bytes or if to send them straight away.
+ *
+ * Solution: Don't use these with Mona's DFC and complain loudly.
+ */
+static void dfc_write_word(struct mtd_info *mtd, u16 word)
+{
+	printf("dfc_write_word: WARNING, this function does not work with the Monahans DFC!\n");
+}
+static void dfc_write_byte(struct mtd_info *mtd, u_char byte)
+{
+	printf("dfc_write_byte: WARNING, this function does not work with the Monahans DFC!\n");
+}
+
+/* The original:
+ * static void dfc_read_buf(struct mtd_info *mtd, const u_char *buf, int len)
+ *
+ * Shouldn't this be "u_char * const buf" ?
+ */
+static void dfc_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
+{
+	int i=0, j;
+
+	/* we have to be carefull not to overflow the buffer if len is
+	 * not a multiple of 4 */
+	unsigned long bytes_multi = len & 0xfffffffc;
+	unsigned long rest = len & 0x3;
+	unsigned long *long_buf;
+
+	DFC_DEBUG3("dfc_read_buf: reading %d bytes.\n", len);
+	/* if there are any, first copy multiple of 4 bytes */
+	if(bytes_multi) {
+		for(i=0; i<bytes_multi; i+=4) {
+			long_buf = (unsigned long*) &buf[i];
+			*long_buf = NDDB;
+		}
+	}
+
+	/* ...then the rest */
+	if(rest) {
+		unsigned long rest_data = NDDB;
+		for(j=0;j<rest; j++)
+			buf[i+j] = (u_char) ((rest_data>>j) & 0xff);
+	}
+
+	return;
+}
+
+/*
+ * read a word. Not implemented as not used in NAND code.
+ */
+static u16 dfc_read_word(struct mtd_info *mtd)
+{
+	printf("dfc_write_byte: UNIMPLEMENTED.\n");
+	return 0;
+}
+
+/* global var, too bad: mk@tbd: move to ->priv pointer */
+static unsigned long read_buf = 0;
+static int bytes_read = -1;
+
+/*
+ * read a byte from NDDB Because we can only read 4 bytes from NDDB at
+ * a time, we buffer the remaining bytes. The buffer is reset when a
+ * new command is sent to the chip.
+ *
+ * WARNING:
+ * This function is currently only used to read status and id
+ * bytes. For these commands always 8 bytes need to be read from
+ * NDDB. So we read and discard these bytes right now. In case this
+ * function is used for anything else in the future, we must check
+ * what was the last command issued and read the appropriate amount of
+ * bytes respectively.
+ */
+static u_char dfc_read_byte(struct mtd_info *mtd)
+{
+	unsigned char byte;
+	unsigned long dummy;
+
+	if(bytes_read < 0) {
+		read_buf = NDDB;
+		dummy = NDDB;
+		bytes_read = 0;
+	}
+	byte = (unsigned char) (read_buf>>(8 * bytes_read++));
+	if(bytes_read >= 4)
+		bytes_read = -1;
+
+	DFC_DEBUG2("dfc_read_byte: byte %u: 0x%x of (0x%x).\n", bytes_read - 1, byte, read_buf);
+	return byte;
+}
+
+/* calculate delta between OSCR values start and now  */
+static unsigned long get_delta(unsigned long start)
+{
+	unsigned long cur = OSCR;
+
+	if(cur < start) /* OSCR overflowed */
+		return (cur + (start^0xffffffff));
+	else
+		return (cur - start);
+}
+
+/* delay function, this doesn't belong here */
+static void wait_us(unsigned long us)
+{
+	unsigned long start = OSCR;
+	us *= OSCR_CLK_FREQ;
+
+	while (get_delta(start) < us) {
+		/* do nothing */
+	}
+}
+
+static void dfc_clear_nddb(void)
+{
+	NDCR &= ~NDCR_ND_RUN;
+	wait_us(CFG_NAND_OTHER_TO);
+}
+
+/* wait_event with timeout */
+static unsigned long dfc_wait_event(unsigned long event)
+{
+	unsigned long ndsr, timeout, start = OSCR;
+
+	if(!event)
+		return 0xff000000;
+	else if(event & (NDSR_CS0_CMDD | NDSR_CS0_BBD))
+		timeout = CFG_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
+	else
+		timeout = CFG_NAND_OTHER_TO * OSCR_CLK_FREQ;
+
+	while(1) {
+		ndsr = NDSR;
+		if(ndsr & event) {
+			NDSR |= event;
+			break;
+		}
+		if(get_delta(start) > timeout) {
+			DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%x.\n", event);
+			return 0xff000000;
+		}
+
+	}
+	return ndsr;
+}
+
+/* we don't always wan't to do this */
+static void dfc_new_cmd(void)
+{
+	int retry = 0;
+	unsigned long status;
+
+	while(retry++ <= CFG_NAND_SENDCMD_RETRY) {
+		/* Clear NDSR */
+		NDSR = 0xFFF;
+
+		/* set NDCR[NDRUN] */
+		if(!(NDCR & NDCR_ND_RUN))
+			NDCR |= NDCR_ND_RUN;
+
+		status = dfc_wait_event(NDSR_WRCMDREQ);
+
+		if(status & NDSR_WRCMDREQ)
+			return;
+
+		DFC_DEBUG2("dfc_new_cmd: FAILED to get WRITECMDREQ, retry: %d.\n", retry);
+		dfc_clear_nddb();
+	}
+	DFC_DEBUG1("dfc_new_cmd: giving up after %d retries.\n", retry);
+}
+
+/* this function is called after Programm and Erase Operations to
+ * check for success or failure */
+static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+{
+	unsigned long ndsr=0, event=0;
+
+	if(state == FL_WRITING) {
+		event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
+	} else if(state == FL_ERASING) {
+		event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
+	}
+
+	ndsr = dfc_wait_event(event);
+
+	if((ndsr & NDSR_CS0_BBD) || (ndsr & 0xff000000))
+		return(0x1); /* Status Read error */
+	return 0;
+}
+
+/* cmdfunc send commands to the DFC */
+static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command,
+			int column, int page_addr)
+{
+	/* register struct nand_chip *this = mtd->priv; */
+	unsigned long ndcb0=0, ndcb1=0, ndcb2=0, event=0;
+
+	/* clear the ugly byte read buffer */
+	bytes_read = -1;
+	read_buf = 0;
+
+	switch (command) {
+	case NAND_CMD_READ0:
+		DFC_DEBUG3("dfc_cmdfunc: NAND_CMD_READ0, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
+		dfc_new_cmd();
+		ndcb0 = (NAND_CMD_READ0 | (4<<16));
+		column >>= 1; /* adjust for 16 bit bus */
+		ndcb1 = (((column>>1) & 0xff) |
+			 ((page_addr<<8) & 0xff00) |
+			 ((page_addr<<8) & 0xff0000) |
+			 ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
+		event = NDSR_RDDREQ;
+		goto write_cmd;
+	case NAND_CMD_READ1:
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READ1 unimplemented!\n");
+		goto end;
+	case NAND_CMD_READOOB:
+		DFC_DEBUG1("dfc_cmdfunc: NAND_CMD_READOOB unimplemented!\n");
+		goto end;
+	case NAND_CMD_READID:
+		dfc_new_cmd();
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READID.\n");
+		ndcb0 = (NAND_CMD_READID | (3 << 21) | (1 << 16)); /* addr cycles*/
+		event = NDSR_RDDREQ;
+		goto write_cmd;
+	case NAND_CMD_PAGEPROG:
+		/* sent as a multicommand in NAND_CMD_SEQIN */
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_PAGEPROG empty due to multicmd.\n");
+		goto end;
+	case NAND_CMD_ERASE1:
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE1,  page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
+		dfc_new_cmd();
+		ndcb0 = (0xd060 | (1<<25) | (2<<21) | (1<<19) | (3<<16));
+		ndcb1 = (page_addr & 0x00ffffff);
+		goto write_cmd;
+	case NAND_CMD_ERASE2:
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE2 empty due to multicmd.\n");
+		goto end;
+	case NAND_CMD_SEQIN:
+		/* send PAGE_PROG command(0x1080) */
+		dfc_new_cmd();
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG,  page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
+		ndcb0 = (0x1080 | (1<<25) | (1<<21) | (1<<19) | (4<<16));
+		column >>= 1; /* adjust for 16 bit bus */
+		ndcb1 = (((column>>1) & 0xff) |
+			 ((page_addr<<8) & 0xff00) |
+			 ((page_addr<<8) & 0xff0000) |
+			 ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
+		event = NDSR_WRDREQ;
+		goto write_cmd;
+	case NAND_CMD_STATUS:
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_STATUS.\n");
+		dfc_new_cmd();
+		ndcb0 = NAND_CMD_STATUS | (4<<21);
+		event = NDSR_RDDREQ;
+		goto write_cmd;
+	case NAND_CMD_RESET:
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_RESET.\n");
+		ndcb0 = NAND_CMD_RESET | (5<<21);
+		event = NDSR_CS0_CMDD;
+		goto write_cmd;
+	default:
+		printk("dfc_cmdfunc: error, unsupported command.\n");
+		goto end;
+	}
+
+ write_cmd:
+	NDCB0 = ndcb0;
+	NDCB0 = ndcb1;
+	NDCB0 = ndcb2;
+
+	/*  wait_event: */
+	dfc_wait_event(event);
+ end:
+	return;
+}
+
+static void dfc_gpio_init(void)
+{
+	DFC_DEBUG2("Setting up DFC GPIO's.\n");
+
+	/* no idea what is done here, see zylonite.c */
+	GPIO4 = 0x1;
+
+	DF_ALE_WE1 = 0x00000001;
+	DF_ALE_WE2 = 0x00000001;
+	DF_nCS0 = 0x00000001;
+	DF_nCS1 = 0x00000001;
+	DF_nWE = 0x00000001;
+	DF_nRE = 0x00000001;
+	DF_IO0 = 0x00000001;
+	DF_IO8 = 0x00000001;
+	DF_IO1 = 0x00000001;
+	DF_IO9 = 0x00000001;
+	DF_IO2 = 0x00000001;
+	DF_IO10 = 0x00000001;
+	DF_IO3 = 0x00000001;
+	DF_IO11 = 0x00000001;
+	DF_IO4 = 0x00000001;
+	DF_IO12 = 0x00000001;
+	DF_IO5 = 0x00000001;
+	DF_IO13 = 0x00000001;
+	DF_IO6 = 0x00000001;
+	DF_IO14 = 0x00000001;
+	DF_IO7 = 0x00000001;
+	DF_IO15 = 0x00000001;
+
+	DF_nWE = 0x1901;
+	DF_nRE = 0x1901;
+	DF_CLE_NOE = 0x1900;
+	DF_ALE_WE1 = 0x1901;
+	DF_INT_RnB = 0x1900;
+}
+
+/*
+ * Board-specific NAND initialization. The following members of the
+ * argument are board-specific (per include/linux/mtd/nand_new.h):
+ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
+ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
+ * - hwcontrol: hardwarespecific function for accesing control-lines
+ * - dev_ready: hardwarespecific function for  accesing device ready/busy line
+ * - enable_hwecc?: function to enable (reset)  hardware ecc generator. Must
+ *   only be provided if a hardware ECC is available
+ * - eccmode: mode of ecc, see defines
+ * - chip_delay: chip dependent delay for transfering data from array to
+ *   read regs (tR)
+ * - options: various chip options. They can partly be set to inform
+ *   nand_scan about special functionality. See the defines for further
+ *   explanation
+ * Members with a "?" were not set in the merged testing-NAND branch,
+ * so they are not set here either.
+ */
+void board_nand_init(struct nand_chip *nand)
+{
+	unsigned long tCH, tCS, tWH, tWP, tRH, tRP, tRP_high, tR, tWHR, tAR;
+
+	/* set up GPIO Control Registers */
+	dfc_gpio_init();
+
+	/* turn on the NAND Controller Clock (104 MHz @ D0) */
+	CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
+
+#undef CFG_TIMING_TIGHT
+#ifndef CFG_TIMING_TIGHT
+	tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1),
+		  DFC_MAX_tCH);
+	tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1),
+		  DFC_MAX_tCS);
+	tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US) + 1),
+		  DFC_MAX_tWH);
+	tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US) + 1),
+		  DFC_MAX_tWP);
+	tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US) + 1),
+		  DFC_MAX_tRH);
+	tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US) + 1),
+		  DFC_MAX_tRP);
+	tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) + 1),
+		 DFC_MAX_tR);
+	tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) + 1),
+		   DFC_MAX_tWHR);
+	tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) + 1),
+		  DFC_MAX_tAR);
+#else /* this is the tight timing */
+
+	tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US)),
+		  DFC_MAX_tCH);
+	tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US)),
+		  DFC_MAX_tCS);
+	tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US)),
+		  DFC_MAX_tWH);
+	tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US)),
+		  DFC_MAX_tWP);
+	tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US)),
+		  DFC_MAX_tRH);
+	tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US)),
+		  DFC_MAX_tRP);
+	tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) - tCH - 2),
+		 DFC_MAX_tR);
+	tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) - tCH - 2),
+		   DFC_MAX_tWHR);
+	tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) - 2),
+		  DFC_MAX_tAR);
+#endif /* CFG_TIMING_TIGHT */
+
+
+	DFC_DEBUG2("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR);
+
+	/* tRP value is split in the register */
+	if(tRP & (1 << 4)) {
+		tRP_high = 1;
+		tRP &= ~(1 << 4);
+	} else {
+		tRP_high = 0;
+	}
+
+	NDTR0CS0 = (tCH << 19) |
+		(tCS << 16) |
+		(tWH << 11) |
+		(tWP << 8) |
+		(tRP_high << 6) |
+		(tRH << 3) |
+		(tRP << 0);
+
+	NDTR1CS0 = (tR << 16) |
+		(tWHR << 4) |
+		(tAR << 0);
+
+	/* If it doesn't work (unlikely) think about:
+	 *  - ecc enable
+	 *  - chip select don't care
+	 *  - read id byte count
+	 *
+	 * Intentionally enabled by not setting bits:
+	 *  - dma (DMA_EN)
+	 *  - page size = 512
+	 *  - cs don't care, see if we can enable later!
+	 *  - row address start position (after second cycle)
+	 *  - pages per block = 32
+	 *  - ND_RDY : clears command buffer
+	 */
+	/* NDCR_NCSX |		/\* Chip select busy don't care *\/ */
+
+	NDCR = (NDCR_SPARE_EN |		/* use the spare area */
+		NDCR_DWIDTH_C |		/* 16bit DFC data bus width  */
+		NDCR_DWIDTH_M |		/* 16 bit Flash device data bus width */
+		(2 << 16) |		/* read id count = 7 ???? mk@tbd */
+		NDCR_ND_ARB_EN |	/* enable bus arbiter */
+		NDCR_RDYM |		/* flash device ready ir masked */
+		NDCR_CS0_PAGEDM |	/* ND_nCSx page done ir masked */
+		NDCR_CS1_PAGEDM |
+		NDCR_CS0_CMDDM |	/* ND_CSx command done ir masked */
+		NDCR_CS1_CMDDM |
+		NDCR_CS0_BBDM |		/* ND_CSx bad block detect ir masked */
+		NDCR_CS1_BBDM |
+		NDCR_DBERRM |		/* double bit error ir masked */
+		NDCR_SBERRM |		/* single bit error ir masked */
+		NDCR_WRDREQM |		/* write data request ir masked */
+		NDCR_RDDREQM |		/* read data request ir masked */
+		NDCR_WRCMDREQM);	/* write command request ir masked */
+
+
+	/* wait 10 us due to cmd buffer clear reset */
+	/*	wait(10); */
+
+
+	nand->hwcontrol = dfc_hwcontrol;
+/*	nand->dev_ready = dfc_device_ready; */
+	nand->eccmode = NAND_ECC_SOFT;
+	nand->options = NAND_BUSWIDTH_16;
+	nand->waitfunc = dfc_wait;
+	nand->read_byte = dfc_read_byte;
+	nand->write_byte = dfc_write_byte;
+	nand->read_word = dfc_read_word;
+	nand->write_word = dfc_write_word;
+	nand->read_buf = dfc_read_buf;
+	nand->write_buf = dfc_write_buf;
+
+	nand->cmdfunc = dfc_cmdfunc;
+	nand->autooob = &delta_oob;
+	nand->badblock_pattern = &delta_bbt_descr;
+}
+
+#else
+ #error "U-Boot legacy NAND support not available for Monahans DFC."
+#endif
+#endif
diff --git a/include/configs/delta.h b/include/configs/delta.h
index e4c8cca..91284fd 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -66,6 +66,17 @@
 #define CFG_I2C_INIT_BOARD	1
 /* #define CONFIG_HW_WATCHDOG	1	/\* Required for hitting the DA9030 WD *\/ */
 
+#define DELTA_CHECK_KEYBD	1	/* check for keys pressed during boot */
+#define CONFIG_PREBOOT		"\0"
+
+#ifdef DELTA_CHECK_KEYBD
+# define KEYBD_DATALEN		4	/* we have four keys */
+# define KEYBD_KP_DKIN0		0x1	/* vol+ */
+# define KEYBD_KP_DKIN1		0x2	/* vol- */
+# define KEYBD_KP_DKIN2		0x3	/* multi */
+# define KEYBD_KP_DKIN5		0x4	/* SWKEY_GN */
+#endif /* DELTA_CHECK_KEYBD */
+
 /*
  * select serial console configuration
  */
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 4232d50..c6aa8ec 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -76,14 +76,17 @@
 
 #define CONFIG_BAUDRATE		115200
 
-/* #define CONFIG_COMMANDS       (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) */
 #ifdef TURN_ON_ETHERNET
 # define CONFIG_COMMANDS        (CONFIG_CMD_DFL | CFG_CMD_PING)
 #else
-# define CONFIG_COMMANDS	(CONFIG_CMD_DFL & ~CFG_CMD_NET)
+# define CONFIG_COMMANDS	((CONFIG_CMD_DFL \
+				  | CFG_CMD_ENV \
+				  | CFG_CMD_NAND) \
+				 & ~(CFG_CMD_NET \
+				     | CFG_CMD_FLASH \
+				     | CFG_CMD_IMLS))
 #endif
 
-
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
@@ -127,8 +130,11 @@
 
 #define CFG_LOAD_ADDR	(CFG_DRAM_BASE + 0x8000) /* default load address */
 
-#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
+#define CFG_HZ			3250000		/* incrementer freq: 3.25 MHz */
+
+/* Monahans Core Frequency */
+#define CFG_MONAHANS_RUN_MODE_OSC_RATIO		16 /* valid values: 8, 16, 24, 31 */
+#define CFG_MONAHANS_TURBO_RUN_MODE_RATIO	1  /* valid values: 1, 2 */
 
 						/* valid baudrates */
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
@@ -159,98 +165,64 @@
 #define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
 #define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */
 
-#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2		0x04000000 /* Flash Bank #2 */
-#define PHYS_FLASH_SIZE		0x02000000 /* 32 MB */
-#define PHYS_FLASH_BANK_SIZE	0x02000000 /* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE	0x00040000 /* 256 KB sectors (x2) */
+#define CFG_DRAM_BASE		0x80000000 /* at CS0 */
+#define CFG_DRAM_SIZE		0x04000000 /* 64 MB Ram */
 
-#define CFG_DRAM_BASE		0xa0000000
-#define CFG_DRAM_SIZE		0x04000000
+#undef CFG_SKIP_DRAM_SCRUB
 
-#define CFG_FLASH_BASE		PHYS_FLASH_1
-
-#define FPGA_REGS_BASE_PHYSICAL 0x08000000
 
 /*
- * GPIO settings
+ * NAND Flash
  */
-#define CFG_GPSR0_VAL		0x00008000
-#define CFG_GPSR1_VAL		0x00FC0382
-#define CFG_GPSR2_VAL		0x0001FFFF
-#define CFG_GPCR0_VAL		0x00000000
-#define CFG_GPCR1_VAL		0x00000000
-#define CFG_GPCR2_VAL		0x00000000
-#define CFG_GPDR0_VAL		0x0060A800
-#define CFG_GPDR1_VAL		0x00FF0382
-#define CFG_GPDR2_VAL		0x0001C000
-#define CFG_GAFR0_L_VAL		0x98400000
-#define CFG_GAFR0_U_VAL		0x00002950
-#define CFG_GAFR1_L_VAL		0x000A9558
-#define CFG_GAFR1_U_VAL		0x0005AAAA
-#define CFG_GAFR2_L_VAL		0xA0000000
-#define CFG_GAFR2_U_VAL		0x00000002
-
-#define CFG_PSSR_VAL		0x20
+/* Use the new NAND code. (BOARDLIBS = drivers/nand/libnand.a required) */
+#define CONFIG_NEW_NAND_CODE
+#define CFG_NAND0_BASE		0x0
+#undef CFG_NAND1_BASE
 
-/*
- * Memory settings
- */
-#define CFG_MSC0_VAL		0x23F223F2
-#define CFG_MSC1_VAL		0x3FF1A441
-#define CFG_MSC2_VAL		0x7FF97FF1
-#define CFG_MDCNFG_VAL		0x00001AC9
-#define CFG_MDREFR_VAL		0x00018018
-#define CFG_MDMRS_VAL		0x00000000
+#define CFG_NAND_BASE_LIST	{ CFG_NAND0_BASE }
+#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
 
-/*
- * PCMCIA and CF Interfaces
- */
-#define CFG_MECR_VAL		0x00000000
-#define CFG_MCMEM0_VAL		0x00010504
-#define CFG_MCMEM1_VAL		0x00010504
-#define CFG_MCATT0_VAL		0x00010504
-#define CFG_MCATT1_VAL		0x00010504
-#define CFG_MCIO0_VAL		0x00004715
-#define CFG_MCIO1_VAL		0x00004715
+/* nand timeout values */
+#define CFG_NAND_PROG_ERASE_TO	3000
+#define CFG_NAND_OTHER_TO	100
+#define CFG_NAND_SENDCMD_RETRY	3
+#undef NAND_ALLOW_ERASE_ALL	/* Allow erasing bad blocks - don't use */
 
-#define _LED			0x08000010
-#define LED_BLANK		0x08000040
+/* NAND Timing Parameters (in ns) */
+#define NAND_TIMING_tCH		10
+#define NAND_TIMING_tCS		0
+#define NAND_TIMING_tWH		20
+#define NAND_TIMING_tWP		40
 
-/*
- * FLASH and environment organization
- */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
+#define NAND_TIMING_tRH		20
+#define NAND_TIMING_tRP		40
 
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */
+#define NAND_TIMING_tR		11123
+#define NAND_TIMING_tWHR	100
+#define NAND_TIMING_tAR		10
 
-/* NOTE: many default partitioning schemes assume the kernel starts at the
- * second sector, not an environment.  You have been warned!
- */
-#define	CFG_MONITOR_LEN		PHYS_FLASH_SECT_SIZE
+/* NAND debugging */
+#define CFG_DFC_DEBUG1 /* usefull */
+#undef CFG_DFC_DEBUG2  /* noisy */
+#undef CFG_DFC_DEBUG3  /* extremly noisy  */
 
-#define CFG_ENV_IS_IN_FLASH     1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)
-#define CFG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE
-#define CFG_ENV_SIZE		(PHYS_FLASH_SECT_SIZE / 16)
+#define CONFIG_MTD_DEBUG
+#define CONFIG_MTD_DEBUG_VERBOSE 1
 
+#define ADDR_COLUMN		1
+#define ADDR_PAGE		2
+#define ADDR_COLUMN_PAGE	3
+
+#define NAND_ChipID_UNKNOWN	0x00
+#define NAND_MAX_FLOORS		1
+#define NAND_MAX_CHIPS		1
+
+#define CFG_NO_FLASH		1
+
+#define CFG_ENV_IS_IN_NAND	1
+#define CFG_ENV_OFFSET		0x40000
+#define CFG_ENV_OFFSET_REDUND	0x44000
+#define CFG_ENV_SIZE		0x4000
 
-/*
- * FPGA Offsets
- */
-#define WHOAMI_OFFSET		0x00
-#define HEXLED_OFFSET		0x10
-#define BLANKLED_OFFSET		0x40
-#define DISCRETELED_OFFSET	0x40
-#define CNFG_SWITCHES_OFFSET	0x50
-#define USER_SWITCHES_OFFSET	0x60
-#define MISC_WR_OFFSET		0x80
-#define MISC_RD_OFFSET		0x90
-#define INT_MASK_OFFSET		0xC0
-#define INT_CLEAR_OFFSET	0xD0
-#define GP_OFFSET		0x100
 
 #endif	/* __CONFIG_H */
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 1028b04..babc254 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -297,7 +297,7 @@ void start_armboot (void)
 	mem_malloc_init (_armboot_start - CFG_MALLOC_LEN);
 
 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
-	puts ("NAND:");
+	puts ("NAND:  ");
 	nand_init();		/* go init the NAND */
 #endif
 
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index e25833b..80c41a6 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -631,7 +631,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
 	WATCHDOG_RESET ();
-	puts ("NAND:");
+	puts ("NAND:  ");
 	nand_init();		/* go init the NAND */
 #endif