summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorpekon gupta <pekon@ti.com>2014-05-08 21:43:47 +0530
committerTom Rini <trini@ti.com>2014-05-23 19:39:36 -0400
commita0a37183bd75e74608bc78c8d0e2a34454f95a91 (patch)
treeb9505eae7d21e6c518e94011fd115ec14e30bcea
parentcd324a6dd252856fa55bd17d539a9466ae86411a (diff)
downloadu-boot-imx-a0a37183bd75e74608bc78c8d0e2a34454f95a91.zip
u-boot-imx-a0a37183bd75e74608bc78c8d0e2a34454f95a91.tar.gz
u-boot-imx-a0a37183bd75e74608bc78c8d0e2a34454f95a91.tar.bz2
ARM: omap: merge GPMC initialization code for all platform
GPMC controller on TI's OMAP SoC is general purpose controller to interface with different types of external devices like; - parallel NOR flash - parallel NAND flash - OneNand flash - SDR RAM - Ethernet Devices like LAN9220 Though GPMC configurations may be different for each platform depending on clock-frequency and external device interfacing with controller. But initialization sequence remains common across all platfoms. Thus this patch merges gpmc_init() scattered in different arch-xx/mem.c files into single omap-common/mem-common.c However, actual platforms specific register config values are still sourced from corresponding platform specific headers like; AM33xx: arch/arm/include/asm/arch-am33xx/mem.h OMAP3: arch/arm/include/asm/arch-omap3/mem.h OMAP4: arch/arm/include/asm/arch-omap4/mem.h OMAP4: arch/arm/include/asm/arch-omap5/mem.h Also, CONFIG_xx passed by board-profile decide config for which set of macros need to be used for initialization CONFIG_NAND: initialize GPMC for NAND device CONFIG_NOR: initialize GPMC for NOR device CONFIG_ONENAND: initialize GPMC for ONENAND device Signed-off-by: Pekon Gupta <pekon@ti.com> [trini: define GPMC_SIZE_256M for omap3] Signed-off-by: Tom Rini <trini@ti.com>
-rw-r--r--arch/arm/cpu/armv7/am33xx/Makefile1
-rw-r--r--arch/arm/cpu/armv7/am33xx/mem.c98
-rw-r--r--arch/arm/cpu/armv7/omap-common/Makefile4
-rw-r--r--arch/arm/cpu/armv7/omap-common/mem-common.c117
-rw-r--r--arch/arm/cpu/armv7/omap3/Makefile1
-rw-r--r--arch/arm/include/asm/arch-omap3/mem.h1
6 files changed, 112 insertions, 110 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile
index 5566310..aae3f09 100644
--- a/arch/arm/cpu/armv7/am33xx/Makefile
+++ b/arch/arm/cpu/armv7/am33xx/Makefile
@@ -14,7 +14,6 @@ endif
obj-$(CONFIG_TI816X) += clock_ti816x.o
obj-y += sys_info.o
-obj-y += mem.o
obj-y += ddr.o
obj-y += emif4.o
obj-y += board.o
diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c
deleted file mode 100644
index 56c9e7d..0000000
--- a/arch/arm/cpu/armv7/am33xx/mem.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- * Mansoor Ahamed <mansoor.ahamed@ti.com>
- *
- * Initial Code from:
- * Manikandan Pillai <mani.pillai@ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <khasim@ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <command.h>
-
-struct gpmc *gpmc_cfg;
-
-
-void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
- u32 size)
-{
- writel(0, &cs->config7);
- sdelay(1000);
- /* Delay for settling */
- writel(gpmc_config[0], &cs->config1);
- writel(gpmc_config[1], &cs->config2);
- writel(gpmc_config[2], &cs->config3);
- writel(gpmc_config[3], &cs->config4);
- writel(gpmc_config[4], &cs->config5);
- writel(gpmc_config[5], &cs->config6);
- /* Enable the config */
- writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) |
- (1 << 6)), &cs->config7);
- sdelay(2000);
-}
-
-/*****************************************************
- * gpmc_init(): init gpmc bus
- * Init GPMC for x16, MuxMode (SDRAM in x32).
- * This code can only be executed from SRAM or SDRAM.
- *****************************************************/
-void gpmc_init(void)
-{
- /* putting a blanket check on GPMC based on ZeBu for now */
- gpmc_cfg = (struct gpmc *)GPMC_BASE;
-#if defined(CONFIG_NOR)
-/* configure GPMC for NOR */
- const u32 gpmc_regs[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1,
- STNOR_GPMC_CONFIG2,
- STNOR_GPMC_CONFIG3,
- STNOR_GPMC_CONFIG4,
- STNOR_GPMC_CONFIG5,
- STNOR_GPMC_CONFIG6,
- STNOR_GPMC_CONFIG7
- };
- u32 size = GPMC_SIZE_16M;
- u32 base = CONFIG_SYS_FLASH_BASE;
-#elif defined(CONFIG_NAND)
-/* configure GPMC for NAND */
- const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1,
- M_NAND_GPMC_CONFIG2,
- M_NAND_GPMC_CONFIG3,
- M_NAND_GPMC_CONFIG4,
- M_NAND_GPMC_CONFIG5,
- M_NAND_GPMC_CONFIG6,
- 0
- };
- u32 size = GPMC_SIZE_256M;
- u32 base = CONFIG_SYS_NAND_BASE;
-#else
- const u32 gpmc_regs[GPMC_MAX_REG] = { 0, 0, 0, 0, 0, 0, 0 };
- u32 size = 0;
- u32 base = 0;
-#endif
- /* global settings */
- writel(0x00000008, &gpmc_cfg->sysconfig);
- writel(0x00000000, &gpmc_cfg->irqstatus);
- writel(0x00000000, &gpmc_cfg->irqenable);
-#ifdef CONFIG_NOR
- writel(0x00000200, &gpmc_cfg->config);
-#else
- writel(0x00000012, &gpmc_cfg->config);
-#endif
- /*
- * Disable the GPMC0 config set by ROM code
- */
- writel(0, &gpmc_cfg->cs[0].config7);
- sdelay(1000);
- /* enable chip-select specific configurations */
- enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size);
-}
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 59f5352..5f5132f 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -27,8 +27,4 @@ obj-y += boot-common.o
obj-y += lowlevel_init.o
endif
-ifndef CONFIG_SPL_BUILD
-ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
obj-y += mem-common.o
-endif
-endif
diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/cpu/armv7/omap-common/mem-common.c
index afc1bc1..944ef84 100644
--- a/arch/arm/cpu/armv7/omap-common/mem-common.c
+++ b/arch/arm/cpu/armv7/omap-common/mem-common.c
@@ -2,31 +2,136 @@
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*
- * Steve Sakoman <steve@sakoman.com>
+ * Author :
+ * Mansoor Ahamed <mansoor.ahamed@ti.com>
+ *
+ * Initial Code from:
+ * Manikandan Pillai <mani.pillai@ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
+#include <common.h>
+#include <asm/io.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
+#include <command.h>
+#include <linux/mtd/omap_gpmc.h>
struct gpmc *gpmc_cfg;
+#if defined(CONFIG_OMAP34XX)
+/********************************************************
+ * mem_ok() - test used to see if timings are correct
+ * for a part. Helps in guessing which part
+ * we are currently using.
+ *******************************************************/
+u32 mem_ok(u32 cs)
+{
+ u32 val1, val2, addr;
+ u32 pattern = 0x12345678;
+
+ addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs);
+
+ writel(0x0, addr + 0x400); /* clear pos A */
+ writel(pattern, addr); /* pattern to pos B */
+ writel(0x0, addr + 4); /* remove pattern off the bus */
+ val1 = readl(addr + 0x400); /* get pos A value */
+ val2 = readl(addr); /* get val2 */
+ writel(0x0, addr + 0x400); /* clear pos A */
+
+ if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */
+ return 0;
+ else
+ return 1;
+}
+#endif
+
+void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
+ u32 size)
+{
+ writel(0, &cs->config7);
+ sdelay(1000);
+ /* Delay for settling */
+ writel(gpmc_config[0], &cs->config1);
+ writel(gpmc_config[1], &cs->config2);
+ writel(gpmc_config[2], &cs->config3);
+ writel(gpmc_config[3], &cs->config4);
+ writel(gpmc_config[4], &cs->config5);
+ writel(gpmc_config[5], &cs->config6);
+ /* Enable the config */
+ writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) |
+ (1 << 6)), &cs->config7);
+ sdelay(2000);
+}
+
/*****************************************************
* gpmc_init(): init gpmc bus
+ * Init GPMC for x16, MuxMode (SDRAM in x32).
* This code can only be executed from SRAM or SDRAM.
*****************************************************/
void gpmc_init(void)
{
+ /* putting a blanket check on GPMC based on ZeBu for now */
gpmc_cfg = (struct gpmc *)GPMC_BASE;
-
+#if defined(CONFIG_NOR)
+/* configure GPMC for NOR */
+ const u32 gpmc_regs[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1,
+ STNOR_GPMC_CONFIG2,
+ STNOR_GPMC_CONFIG3,
+ STNOR_GPMC_CONFIG4,
+ STNOR_GPMC_CONFIG5,
+ STNOR_GPMC_CONFIG6,
+ STNOR_GPMC_CONFIG7
+ };
+ u32 size = GPMC_SIZE_16M;
+ u32 base = CONFIG_SYS_FLASH_BASE;
+#elif defined(CONFIG_NAND)
+/* configure GPMC for NAND */
+ const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1,
+ M_NAND_GPMC_CONFIG2,
+ M_NAND_GPMC_CONFIG3,
+ M_NAND_GPMC_CONFIG4,
+ M_NAND_GPMC_CONFIG5,
+ M_NAND_GPMC_CONFIG6,
+ 0
+ };
+ u32 size = GPMC_SIZE_256M;
+ u32 base = CONFIG_SYS_NAND_BASE;
+#elif defined(CONFIG_CMD_ONENAND)
+ const u32 gpmc_regs[GPMC_MAX_REG] = { ONENAND_GPMC_CONFIG1,
+ ONENAND_GPMC_CONFIG2,
+ ONENAND_GPMC_CONFIG3,
+ ONENAND_GPMC_CONFIG4,
+ ONENAND_GPMC_CONFIG5,
+ ONENAND_GPMC_CONFIG6,
+ 0
+ };
+ u32 base = PISMO1_ONEN_BASE;
+ u32 size = PISMO1_ONEN_SIZE;
+#else
+ const u32 gpmc_regs[GPMC_MAX_REG] = { 0, 0, 0, 0, 0, 0, 0 };
+ u32 size = 0;
+ u32 base = 0;
+#endif
/* global settings */
- writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */
- writel(0, &gpmc_cfg->timeout_control);/* timeout disable */
-
+ writel(0x00000008, &gpmc_cfg->sysconfig);
+ writel(0x00000000, &gpmc_cfg->irqstatus);
+ writel(0x00000000, &gpmc_cfg->irqenable);
+ writel(0x00000000, &gpmc_cfg->timeout_control);
+#ifdef CONFIG_NOR
+ writel(0x00000200, &gpmc_cfg->config);
+#else
+ writel(0x00000012, &gpmc_cfg->config);
+#endif
/*
* Disable the GPMC0 config set by ROM code
- * It conflicts with our MPDB (both at 0x08000000)
*/
writel(0, &gpmc_cfg->cs[0].config7);
+ sdelay(1000);
+ /* enable chip-select specific configurations */
+ enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size);
}
diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile
index 39ff257..cf86046 100644
--- a/arch/arm/cpu/armv7/omap3/Makefile
+++ b/arch/arm/cpu/armv7/omap3/Makefile
@@ -9,7 +9,6 @@ obj-y := lowlevel_init.o
obj-y += board.o
obj-y += clock.o
-obj-y += mem.o
obj-y += sys_info.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_OMAP3_ID_NAND) += spl_id_nand.o
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index 1804191..bdb1435 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -344,6 +344,7 @@ enum {
* MAP - Map this CS to which address(GPMC address space)- Absolute address
* >>24 before being used.
*/
+#define GPMC_SIZE_256M 0x0
#define GPMC_SIZE_128M 0x8
#define GPMC_SIZE_64M 0xC
#define GPMC_SIZE_32M 0xE