summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGraeme Russ <graeme.russ@gmail.com>2011-02-12 15:11:54 +1100
committerGraeme Russ <graeme.russ@gmail.com>2011-02-12 15:11:54 +1100
commit96cd66426a6a615373f7f33fb2a8b7ee3925b1cf (patch)
tree4adf528d0ce2fb58f0c90933fd86c5b60a3be0fe
parented4cba79d640daa33806fa228c1a10c6bf9e2101 (diff)
downloadu-boot-imx-96cd66426a6a615373f7f33fb2a8b7ee3925b1cf.zip
u-boot-imx-96cd66426a6a615373f7f33fb2a8b7ee3925b1cf.tar.gz
u-boot-imx-96cd66426a6a615373f7f33fb2a8b7ee3925b1cf.tar.bz2
sc520: Move RAM sizing code from asm to C
-rw-r--r--arch/i386/cpu/sc520/Makefile2
-rw-r--r--arch/i386/cpu/sc520/sc520.c110
-rw-r--r--arch/i386/cpu/sc520/sc520_asm.S608
-rw-r--r--arch/i386/cpu/sc520/sc520_sdram.c532
-rw-r--r--arch/i386/cpu/start.S48
-rw-r--r--arch/i386/include/asm/ic/sc520.h57
-rw-r--r--arch/i386/lib/board.c8
-rw-r--r--board/eNET/eNET.c6
-rw-r--r--board/eNET/eNET_start16.S5
-rw-r--r--include/configs/eNET.h2
10 files changed, 611 insertions, 767 deletions
diff --git a/arch/i386/cpu/sc520/Makefile b/arch/i386/cpu/sc520/Makefile
index 3c25cba..54260b6 100644
--- a/arch/i386/cpu/sc520/Makefile
+++ b/arch/i386/cpu/sc520/Makefile
@@ -33,10 +33,10 @@ LIB := $(obj)lib$(SOC).o
COBJS-$(CONFIG_SYS_SC520) += sc520.o
COBJS-$(CONFIG_PCI) += sc520_pci.o
+COBJS-$(CONFIG_SYS_SC520) += sc520_sdram.o
COBJS-$(CONFIG_SYS_SC520_SSI) += sc520_ssi.o
COBJS-$(CONFIG_SYS_SC520_TIMER) += sc520_timer.o
-SOBJS-$(CONFIG_SYS_SC520) += sc520_asm.o
SOBJS-$(CONFIG_SYS_SC520) += sc520_car.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/arch/i386/cpu/sc520/sc520.c b/arch/i386/cpu/sc520/sc520.c
index 76de6be..d5597ca 100644
--- a/arch/i386/cpu/sc520/sc520.c
+++ b/arch/i386/cpu/sc520/sc520.c
@@ -31,13 +31,6 @@
DECLARE_GLOBAL_DATA_PTR;
-/*
- * utility functions for boards based on the AMD sc520
- *
- * void init_sc520(void)
- * unsigned long init_sc520_dram(void)
- */
-
sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)SC520_MMCR_BASE;
int cpu_init_f(void)
@@ -65,109 +58,6 @@ int cpu_init_f(void)
return x86_cpu_init_f();
}
-unsigned long init_sc520_dram(void)
-{
- bd_t *bd = gd->bd;
-
- u32 dram_present=0;
- u32 dram_ctrl;
-
-#ifdef CONFIG_SYS_SDRAM_DRCTMCTL
- /* these memory control registers are set up in the assember part,
- * in sc520_asm.S, during 'mem_init'. If we muck with them here,
- * after we are running a stack in RAM, we have troubles. Besides,
- * these refresh and delay values are better ? simply specified
- * outright in the include/configs/{cfg} file since the HW designer
- * simply dictates it.
- */
-#else
- u8 tmp;
- u8 val;
-
- int cas_precharge_delay = CONFIG_SYS_SDRAM_PRECHARGE_DELAY;
- int refresh_rate = CONFIG_SYS_SDRAM_REFRESH_RATE;
- int ras_cas_delay = CONFIG_SYS_SDRAM_RAS_CAS_DELAY;
-
- /* set SDRAM speed here */
-
- refresh_rate /= 78;
- if (refresh_rate <= 1) {
- val = 0; /* 7.8us */
- } else if (refresh_rate == 2) {
- val = 1; /* 15.6us */
- } else if (refresh_rate == 3 || refresh_rate == 4) {
- val = 2; /* 31.2us */
- } else {
- val = 3; /* 62.4us */
- }
-
- tmp = (readb(&sc520_mmcr->drcctl) & 0xcf) | (val<<4);
- writeb(tmp, &sc520_mmcr->drcctl);
-
- val = readb(&sc520_mmcr->drctmctl) & 0xf0;
-
- if (cas_precharge_delay==3) {
- val |= 0x04; /* 3T */
- } else if (cas_precharge_delay==4) {
- val |= 0x08; /* 4T */
- } else if (cas_precharge_delay>4) {
- val |= 0x0c;
- }
-
- if (ras_cas_delay > 3) {
- val |= 2;
- } else {
- val |= 1;
- }
- writeb(val, &c520_mmcr->drctmctl);
-#endif
-
- /*
- * We read-back the configuration of the dram
- * controller that the assembly code wrote
- */
- dram_ctrl = readl(&sc520_mmcr->drcbendadr);
-
- bd->bi_dram[0].start = 0;
- if (dram_ctrl & 0x80) {
- /* bank 0 enabled */
- dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22;
- bd->bi_dram[0].size = bd->bi_dram[1].start;
- } else {
- bd->bi_dram[0].size = 0;
- bd->bi_dram[1].start = bd->bi_dram[0].start;
- }
-
- if (dram_ctrl & 0x8000) {
- /* bank 1 enabled */
- dram_present = bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14;
- bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start;
- } else {
- bd->bi_dram[1].size = 0;
- bd->bi_dram[2].start = bd->bi_dram[1].start;
- }
-
- if (dram_ctrl & 0x800000) {
- /* bank 2 enabled */
- dram_present = bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6;
- bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start;
- } else {
- bd->bi_dram[2].size = 0;
- bd->bi_dram[3].start = bd->bi_dram[2].start;
- }
-
- if (dram_ctrl & 0x80000000) {
- /* bank 3 enabled */
- dram_present = (dram_ctrl & 0x7f000000) >> 2;
- bd->bi_dram[3].size = dram_present - bd->bi_dram[3].start;
- } else {
- bd->bi_dram[3].size = 0;
- }
- gd->ram_size = dram_present;
-
- return dram_present;
-}
-
#ifdef CONFIG_SYS_SC520_RESET
void reset_cpu(ulong addr)
{
diff --git a/arch/i386/cpu/sc520/sc520_asm.S b/arch/i386/cpu/sc520/sc520_asm.S
deleted file mode 100644
index 901aa61..0000000
--- a/arch/i386/cpu/sc520/sc520_asm.S
+++ /dev/null
@@ -1,608 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* This file is largely based on code obtned from AMD. AMD's original
- * copyright is included below
- */
-
-/* TITLE SIZER - Aspen DRAM Sizing Routine.
- * =============================================================================
- *
- * Copyright 1999 Advanced Micro Devices, Inc.
- * You may redistribute this program and/or modify this program under the terms
- * of the GNU General Public License as published by the Free Software Foundation;
- * either version 2 of the License, or (at your option) any later version.
- *
- * This program is distributed WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED
- * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY
- * OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF
- * THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE.
- * IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER
- * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS
- * INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY
- * TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGES. BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR
- * LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
- * LIMITATION MAY NOT APPLY TO YOU.
- *
- * AMD does not assume any responsibility for any errors that may appear in
- * the Materials nor any responsibility to support or update the Materials.
- * AMD retains the right to make changes to its test specifications at any
- * time, without notice.
- * ==============================================================================
- */
-
-/*
- ******************************************************************************
- *
- * FILE : sizer.asm - SDRAM DIMM Sizing Algorithm
- *
- *
- *
- * FUNCTIONS : sizemem() - jumped to, not called. To be executed after
- * reset to determine the size of the SDRAM DIMMs. Initializes
- * the memory subsystem.
- *
- *
- * AUTHOR : Buddy Fey - Original.
- *
- *
- * DESCRIPTION : Performs sizing on SDRAM DIMMs on ASPEN processor.
- * NOTE: This is a small memory model version
- *
- *
- * INPUTS : BP contains return address offset
- * CACHE is assumed to be disabled.
- * The FS segment limit has already been set to big real mode
- * (full 32-bit addressing capability)
- *
- *
- * OUTPUTS : None
- *
- *
- * REG USE : ax,bx,cx,dx,di,si,bp, fs
- *
- *
- * REVISION : See PVCS info below
- *
- *
- * TEST PLAN CROSS REFERENCE:
- *
- *
- * $Workfile: $
- * $Revision: 1.2 $
- * $Date: 1999/09/22 12:49:33 $
- * $Author: chipf $
- * $Log: sizer.asm $
- * Revision 1.2 1999/09/22 12:49:33 chipf
- * Add legal header
- *
- *******************************************************************************
- */
-
-
-/*******************************************************************************
- * FUNCTIONAL DESCRIPTION:
- * This routine is called to autodetect the geometry of the DRAM.
- *
- * This routine is called to determine the number of column bits for the DRAM
- * devices in this external bank. This routine assumes that the external bank
- * has been configured for an 11-bit column and for 4 internal banks. This gives
- * us the maximum address reach in memory. By writing a test value to the max
- * address and locating where it aliases to, we can determine the number of valid
- * column bits.
- *
- * This routine is called to determine the number of internal banks each DRAM
- * device has. The external bank (under test) is configured for maximum reach
- * with 11-bit columns and 4 internal banks. This routine will write to a max
- * address (BA1 and BA0 = 1) and then read from an address with BA1=0 to see if
- * that column is a "don't care". If BA1 does not affect write/read of data,
- * then this device has only 2 internal banks.
- *
- * This routine is called to determine the ending address for this external
- * bank of SDRAM. We write to a max address with a data value and then disable
- * row address bits looking for "don't care" locations. Each "don't care" bit
- * represents a dividing of the maximum density (128M) by 2. By dividing the
- * maximum of 32 4M chunks in an external bank down by all the "don't care" bits
- * determined during sizing, we set the proper density.
- *
- * WARNINGS.
- * bp must be preserved because it is used for return linkage.
- *
- * EXIT
- * nothing returned - but the memory subsystem is enabled
- *******************************************************************************
- */
-
-#include <config.h>
-#include <asm/ic/sc520.h>
-
-.section .text
-.equ CACHELINESZ, 0x00000010 /* size of our cache line (read buffer) */
-.equ COL11_ADR, 0x0e001e00 /* 11 col addrs */
-.equ COL10_ADR, 0x0e000e00 /* 10 col addrs */
-.equ COL09_ADR, 0x0e000600 /* 9 col addrs */
-.equ COL08_ADR, 0x0e000200 /* 8 col addrs */
-.equ ROW14_ADR, 0x0f000000 /* 14 row addrs */
-.equ ROW13_ADR, 0x07000000 /* 13 row addrs */
-.equ ROW12_ADR, 0x03000000 /* 12 row addrs */
-.equ ROW11_ADR, 0x01000000 /* 11 row addrs/also bank switch */
-.equ ROW10_ADR, 0x00000000 /* 10 row addrs/also bank switch */
-.equ COL11_DATA, 0x0b0b0b0b /* 11 col addrs */
-.equ COL10_DATA, 0x0a0a0a0a /* 10 col data */
-.equ COL09_DATA, 0x09090909 /* 9 col data */
-.equ COL08_DATA, 0x08080808 /* 8 col data */
-.equ ROW14_DATA, 0x3f3f3f3f /* 14 row data (MASK) */
-.equ ROW13_DATA, 0x1f1f1f1f /* 13 row data (MASK) */
-.equ ROW12_DATA, 0x0f0f0f0f /* 12 row data (MASK) */
-.equ ROW11_DATA, 0x07070707 /* 11 row data/also bank switch (MASK) */
-.equ ROW10_DATA, 0xaaaaaaaa /* 10 row data/also bank switch (MASK) */
-
-.globl mem_init
-mem_init:
- /* Preserve Boot Flags */
- movl %ebx, %ebp
-
- /* initialize dram controller registers */
- xorw %ax, %ax
- movl $SC520_DBCTL, %edi
- movb %al, (%edi) /* disable write buffer */
-
- movl $SC520_ECCCTL, %edi
- movb %al, (%edi) /* disable ECC */
-
- movl $SC520_DRCTMCTL, %edi
- movb $0x1e, %al /* Set SDRAM timing for slowest */
- movb %al, (%edi)
-
- /* setup loop to do 4 external banks starting with bank 3 */
- movl $0xff000000, %eax /* enable last bank and setup */
- movl $SC520_DRCBENDADR, %edi /* ending address register */
- movl %eax, (%edi)
-
- movl $SC520_DRCCFG, %edi /* setup */
- movw $0xbbbb, %ax /* dram config register for */
- movw %ax, (%edi)
-
- /* issue a NOP to all DRAMs */
- movl $SC520_DRCCTL, %edi /* setup DRAM control register with */
- movb $0x01, %al /* Disable refresh,disable write buffer */
- movb %al, (%edi)
- movl $CACHELINESZ, %esi /* just a dummy address to write for */
- movw %ax, (%esi)
-
- /* delay for 100 usec? */
- movw $100, %cx
-sizdelay:
- loop sizdelay
-
- /* issue all banks precharge */
- movb $0x02, %al
- movb %al, (%edi)
- movw %ax, (%esi)
-
- /* issue 2 auto refreshes to all banks */
- movb $0x04, %al /* Auto refresh cmd */
- movb %al, (%edi)
- movw $0x02, %cx
-refresh1:
- movw %ax, (%esi)
- loop refresh1
-
- /* issue LOAD MODE REGISTER command */
- movb $0x03, %al /* Load mode register cmd */
- movb %al, (%edi)
- movw %ax, (%esi)
-
- /* issue 8 more auto refreshes to all banks */
- movb $0x04, %al /* Auto refresh cmd */
- movb %al, (%edi)
- movw $0x0008, %cx
-refresh2:
- movw %ax, (%esi)
- loop refresh2
-
- /* set control register to NORMAL mode */
- movb $0x00, %al /* Normal mode value */
- movb %al, (%edi)
-
- /*
- * size dram starting with external bank 3
- * moving to external bank 0
- */
- movl $0x3, %ecx /* start with external bank 3 */
-
-nextbank:
-
- /* write col 11 wrap adr */
- movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
- movl $COL11_DATA, %eax /* pattern for max supported columns(11) */
- movl %eax, (%esi) /* write max col pattern at max col adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx, %eax /* to verify write */
- jnz bad_ram /* this ram is bad */
-
- /* write col 10 wrap adr */
- movl $COL10_ADR, %esi /* set address to 10 col wrap address */
- movl $COL10_DATA, %eax /* pattern for 10 col wrap */
- movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx, %eax /* to verify write */
- jnz bad_ram /* this ram is bad */
-
- /* write col 9 wrap adr */
- movl $COL09_ADR, %esi /* set address to 9 col wrap address */
- movl $COL09_DATA, %eax /* pattern for 9 col wrap */
- movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx, %eax /* to verify write */
- jnz bad_ram /* this ram is bad */
-
- /* write col 8 wrap adr */
- movl $COL08_ADR, %esi /* set address to min(8) col wrap address */
- movl $COL08_DATA, %eax /* pattern for min (8) col wrap */
- movl %eax, (%esi) /* write min col pattern @ min col adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx, %eax /* to verify write */
- jnz bad_ram /* this ram is bad */
-
- /* write row 14 wrap adr */
- movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */
- movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */
- movl %eax, (%esi) /* write max row pattern at max row adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx, %eax /* to verify write */
- jnz bad_ram /* this ram is bad */
-
- /* write row 13 wrap adr */
- movl $ROW13_ADR, %esi /* set address to 13 row wrap address */
- movl $ROW13_DATA, %eax /* pattern for 13 row wrap */
- movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx, %eax /* to verify write */
- jnz bad_ram /* this ram is bad */
-
- /* write row 12 wrap adr */
- movl $ROW12_ADR, %esi /* set address to 12 row wrap address */
- movl $ROW12_DATA, %eax /* pattern for 12 row wrap */
- movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx, %eax /* to verify write */
- jnz bad_ram /* this ram is bad */
-
- /* write row 11 wrap adr */
- movl $ROW11_ADR, %edi /* set address to 11 row wrap address */
- movl $ROW11_DATA, %eax /* pattern for 11 row wrap */
- movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */
- movl (%edi), %ebx /* optional read */
- cmpl %ebx, %eax /* to verify write */
- jnz bad_ram /* this ram is bad */
-
- /*
- * write row 10 wrap adr --- this write is really to determine
- * number of banks
- */
- movl $ROW10_ADR, %edi /* set address to 10 row wrap address */
- movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */
- movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */
- movl (%edi), %ebx /* optional read */
- cmpl %ebx, %eax /* to verify write */
- jnz bad_ram /* this ram is bad */
-
- /*
- * read data @ row 12 wrap adr to determine * banks,
- * and read data @ row 14 wrap adr to determine * rows.
- * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
- * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
- * if data @ row 12 wrap == 11 or 12, we have 4 banks,
- */
- xorw %di, %di /* value for 2 banks in DI */
- movl (%esi), %ebx /* read from 12 row wrap to check banks */
- /* (esi is setup from the write to row 12 wrap) */
- cmpl %ebx, %eax /* check for AA pattern (eax holds the aa pattern) */
- jz only2 /* if pattern == AA, we only have 2 banks */
-
- /* 4 banks */
-
- movw $0x008, %di /* value for 4 banks in DI (BNK_CNT bit) */
- cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */
- jz only2
- cmpl $ROW12_DATA, %ebx /* and 12 */
- jnz bad_ram /* its bad if not 11 or 12! */
-
- /* fall through */
-only2:
- /*
- * validate row mask
- */
- movl $ROW14_ADR, %esi /* set address back to max row wrap addr */
- movl (%esi), %eax /* read actual number of rows @ row14 adr */
-
- cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */
- jb bad_ram
-
- cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */
- ja bad_ram
-
- cmpb %ah, %al /* verify all 4 bytes of dword same */
- jnz bad_ram
- movl %eax, %ebx
- shrl $16, %ebx
- cmpw %bx, %ax
- jnz bad_ram
-
- /*
- * read col 11 wrap adr for real column data value
- */
- movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
- movl (%esi), %eax /* read real col number at max col adr */
-
- /*
- * validate column data
- */
- cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */
- jb bad_ram
-
- cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */
- ja bad_ram
-
- subl $COL08_DATA, %eax /* normalize column data to zero */
- jc bad_ram
- cmpb %ah, %al /* verify all 4 bytes of dword equal */
- jnz bad_ram
- movl %eax, %edx
- shrl $16, %edx
- cmpw %dx, %ax
- jnz bad_ram
-
- /*
- * merge bank and col data together
- */
- addw %di, %dx /* merge of bank and col info in dl */
-
- /*
- * fix ending addr mask based upon col info
- */
- movb $0x03, %al
- subb %dh, %al /* dh contains the overflow from the bank/col merge */
- movb %bl, %dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */
- xchgw %cx, %ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */
- shrb %cl, %dh
- incb %dh /* ending addr is 1 greater than real end */
- xchgw %cx, %ax /* cx is bank number again */
-
-bad_reint:
- /*
- * issue all banks precharge
- */
- movl $SC520_DRCCTL, %esi /* setup DRAM control register with */
- movb $0x02, %al /* All banks precharge */
- movb %al, (%esi)
- movl $CACHELINESZ, %esi /* address to init read buffer */
- movw %ax, (%esi)
-
- /*
- * update ENDING ADDRESS REGISTER
- */
- movl $SC520_DRCBENDADR, %edi /* DRAM ending address register */
- movl %ecx, %ebx
- addl %ebx, %edi
- movb %dh, (%edi)
-
- /*
- * update CONFIG REGISTER
- */
- xorb %dh, %dh
- movw $0x000f, %bx
- movw %cx, %ax
- shlw $2, %ax
- xchgw %cx, %ax
- shlw %cl, %dx
- shlw %cl, %bx
- notw %bx
- xchgw %cx, %ax
- movl $SC520_DRCCFG, %edi
- movw (%edi), %ax
- andw %bx, %ax
- orw %dx, %ax
- movw %ax, (%edi)
- jcxz cleanup
-
- decw %cx
- movl %ecx, %ebx
- movl $SC520_DRCBENDADR, %edi /* DRAM ending address register */
- movb $0xff, %al
- addl %ebx, %edi
- movb %al, (%edi)
-
- /*
- * set control register to NORMAL mode
- */
- movl $SC520_DRCCTL, %esi /* setup DRAM control register with */
- movb $0x00, %al /* Normal mode value */
- movb %al, (%esi)
- movl $CACHELINESZ, %esi /* address to init read buffer */
- movw %ax, (%esi)
- jmp nextbank
-
-cleanup:
- movl $SC520_DRCBENDADR, %edi /* DRAM ending address register */
- movw $0x04, %cx
- xorw %ax, %ax
-cleanuplp:
- movb (%edi), %al
- orb %al, %al
- jz emptybank
-
- addb %ah, %al
- jns nottoomuch
-
- movb $0x7f, %al
-nottoomuch:
- movb %al, %ah
- orb $0x80, %al
- movb %al, (%edi)
-emptybank:
- incl %edi
- loop cleanuplp
-
-#if defined CONFIG_SYS_SDRAM_DRCTMCTL
- /* just have your hardware desinger _GIVE_ you what you need here! */
- movl $SC520_DRCTMCTL, %edi
- movb $CONFIG_SYS_SDRAM_DRCTMCTL, %al
- movb %al, (%edi)
-#else
-#if defined(CONFIG_SYS_SDRAM_CAS_LATENCY_2T) || defined(CONFIG_SYS_SDRAM_CAS_LATENCY_3T)
- /*
- * Set the CAS latency now since it is hard to do
- * when we run from the RAM
- */
- movl $SC520_DRCTMCTL, %edi /* DRAM timing register */
- movb (%edi), %al
-#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
- andb $0xef, %al
-#endif
-#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
- orb $0x10, %al
-#endif
- movb %al, (%edi)
-#endif
-#endif
- movl $SC520_DRCCTL, %edi /* DRAM Control register */
- movb $0x03, %al /* Load mode register cmd */
- movb %al, (%edi)
- movw %ax, (%esi)
-
-
- movl $SC520_DRCCTL, %edi /* DRAM Control register */
- movb $0x18, %al /* Enable refresh and NORMAL mode */
- movb %al, (%edi)
-
- jmp dram_done
-
-bad_ram:
- xorl %edx, %edx
- xorl %edi, %edi
- jmp bad_reint
-
-dram_done:
- /* Restore Boot Flags */
- movl %ebx, %ebp
- ret
-
-#if CONFIG_SYS_SDRAM_ECC_ENABLE
-.globl init_ecc
-init_ecc:
- /* A nominal memory test: just a byte at each address line */
- movl %eax, %ecx
- shrl $0x1, %ecx
- movl $0x1, %edi
-memtest0:
- movb $0xa5, (%edi)
- cmpb $0xa5, (%edi)
- jne out
- shrl $0x1, %ecx
- andl %ecx, %ecx
- jz set_ecc
- shll $0x1, %edi
- jmp memtest0
-
-set_ecc:
- /* clear all ram with a memset */
- movl %eax, %ecx
- xorl %esi, %esi
- xorl %edi, %edi
- xorl %eax, %eax
- shrl $0x2, %ecx
- cld
- rep stosl
-
- /* enable read, write buffers */
- movb $0x11, %al
- movl $SC520_DBCTL, %edi
- movb %al, (%edi)
-
- /* enable NMI mapping for ECC */
- movl $SC520_ECCINT, %edi
- movb $0x10, %al
- movb %al, (%edi)
-
- /* Turn on ECC */
- movl $SC520_ECCCTL, %edi
- movb $0x05, %al
- movb %al,(%edi)
-
-out:
- ret
-#endif
-
-/*
- * Read and decode the sc520 DRCBENDADR MMCR and return the number of
- * available ram bytes in %eax
- */
-.globl get_mem_size
-get_mem_size:
- movl $SC520_DRCBENDADR, %edi /* DRAM ending address register */
-
-bank0: movl (%edi), %eax
- movl %eax, %ecx
- andl $0x00000080, %ecx
- jz bank1
- andl $0x0000007f, %eax
- shll $22, %eax
- movl %eax, %edx
-
-bank1: movl (%edi), %eax
- movl %eax, %ecx
- andl $0x00008000, %ecx
- jz bank2
- andl $0x00007f00, %eax
- shll $14, %eax
- movl %eax, %edx
-
-bank2: movl (%edi), %eax
- movl %eax, %ecx
- andl $0x00800000, %ecx
- jz bank3
- andl $0x007f0000, %eax
- shll $6, %eax
- movl %eax, %edx
-
-bank3: movl (%edi), %eax
- movl %eax, %ecx
- andl $0x80000000, %ecx
- jz done
- andl $0x7f000000, %eax
- shrl $2, %eax
- movl %eax, %edx
-
-done:
- movl %edx, %eax
- ret
diff --git a/arch/i386/cpu/sc520/sc520_sdram.c b/arch/i386/cpu/sc520/sc520_sdram.c
new file mode 100644
index 0000000..d5ab55d
--- /dev/null
+++ b/arch/i386/cpu/sc520/sc520_sdram.c
@@ -0,0 +1,532 @@
+/*
+ * (C) Copyright 2010
+ * Graeme Russ <graeme.russ@gmail.com>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor-flags.h>
+#include <asm/ic/sc520.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct sc520_sdram_info {
+ u8 banks;
+ u8 columns;
+ u8 rows;
+ u8 size;
+};
+
+static void sc520_sizemem(void);
+static void sc520_set_dram_timing(void);
+static void sc520_set_dram_refresh_rate(void);
+static void sc520_enable_dram_refresh(void);
+static void sc520_enable_sdram(void);
+#if CONFIG_SYS_SDRAM_ECC_ENABLE
+static void sc520_enable_ecc(void)
+#endif
+
+int dram_init_f(void)
+{
+ sc520_sizemem();
+ sc520_set_dram_timing();
+ sc520_set_dram_refresh_rate();
+ sc520_enable_dram_refresh();
+ sc520_enable_sdram();
+#if CONFIG_SYS_SDRAM_ECC_ENABLE
+ sc520_enable_ecc();
+#endif
+
+ return 0;
+}
+
+static inline void sc520_dummy_write(void)
+{
+ writew(0x0000, CACHELINESZ);
+}
+static inline void sc520_issue_sdram_op_mode_select(u8 command)
+{
+ writeb(command, &sc520_mmcr->drcctl);
+ sc520_dummy_write();
+}
+
+static inline int check_long(u32 test_long)
+{
+ u8 i;
+ u8 tmp_byte = (u8)(test_long & 0x000000ff);
+
+ for (i = 1; i < 4; i++) {
+ if ((u8)((test_long >> (i * 8)) & 0x000000ff) != tmp_byte)
+ return -1;
+ }
+
+ return 0;
+}
+
+static inline int write_and_test(u32 data, u32 address)
+{
+ writel(data, address);
+ if (readl(address) == data)
+ return 0; /* Good */
+ else
+ return -1; /* Bad */
+}
+
+static void sc520_enable_sdram(void)
+{
+ u32 par_config;
+
+ /* Enable Writes, Caching and Code Execution to SDRAM */
+ par_config = readl(&sc520_mmcr->par[3]);
+ par_config &= ~(SC520_PAR_EXEC_DIS |
+ SC520_PAR_CACHE_DIS |
+ SC520_PAR_WRITE_DIS);
+ writel(par_config, &sc520_mmcr->par[3]);
+
+ par_config = readl(&sc520_mmcr->par[4]);
+ par_config &= ~(SC520_PAR_EXEC_DIS |
+ SC520_PAR_CACHE_DIS |
+ SC520_PAR_WRITE_DIS);
+ writel(par_config, &sc520_mmcr->par[4]);
+}
+
+static void sc520_set_dram_timing(void)
+{
+ u8 drctmctl = 0x00;
+
+#if defined CONFIG_SYS_SDRAM_DRCTMCTL
+ /* just have your hardware designer _GIVE_ you what you need here! */
+ drctmctl = CONFIG_SYS_SDRAM_DRCTMCTL;
+#else
+ switch (CONFIG_SYS_SDRAM_RAS_CAS_DELAY) {
+ case 2:
+ break;
+ case 3:
+ drctmctl |= 0x01;
+ break;
+ case 4:
+ default:
+ drctmctl |= 0x02;
+ break;
+ }
+
+ switch (CONFIG_SYS_SDRAM_PRECHARGE_DELAY) {
+ case 2:
+ break;
+ case 3:
+ drctmctl |= 0x04;
+ break;
+ case 4:
+ default:
+ drctmctl |= 0x08;
+ break;
+
+ case 6:
+ drctmctl |= 0x0c;
+ break;
+ }
+
+ switch (CONFIG_SYS_SDRAM_CAS_LATENCY) {
+ case 2:
+ break;
+ case 3:
+ default:
+ drctmctl |= 0x10;
+ break;
+ }
+#endif
+ writeb(drctmctl, &sc520_mmcr->drctmctl);
+
+ /* Issue load mode register command */
+ sc520_issue_sdram_op_mode_select(0x03);
+}
+
+static void sc520_set_dram_refresh_rate(void)
+{
+ u8 drctl;
+
+ drctl = readb(&sc520_mmcr->drcctl);
+ drctl &= 0xcf;
+
+ switch (CONFIG_SYS_SDRAM_REFRESH_RATE) {
+ case 78:
+ break;
+ case 156:
+ default:
+ drctl |= 0x10;
+ break;
+ case 312:
+ drctl |= 0x20;
+ break;
+ case 624:
+ drctl |= 0x30;
+ break;
+ }
+
+ writeb(drctl, &sc520_mmcr->drcctl);
+}
+
+static void sc520_enable_dram_refresh(void)
+{
+ u8 drctl;
+
+ drctl = readb(&sc520_mmcr->drcctl);
+ drctl &= 0x30; /* keep refresh rate */
+ drctl |= 0x08; /* enable refresh, normal mode */
+
+ writeb(drctl, &sc520_mmcr->drcctl);
+}
+
+static void sc520_get_bank_info(int bank, struct sc520_sdram_info *bank_info)
+{
+ u32 col_data;
+ u32 row_data;
+
+ u32 drcbendadr;
+ u16 drccfg;
+
+ u8 banks = 0x00;
+ u8 columns = 0x00;
+ u8 rows = 0x00;
+
+ bank_info->banks = 0x00;
+ bank_info->columns = 0x00;
+ bank_info->rows = 0x00;
+ bank_info->size = 0x00;
+
+ if ((bank < 0) || (bank > 3)) {
+ printf("Bad Bank ID\n");
+ return;
+ }
+
+ /* Save configuration */
+ drcbendadr = readl(&sc520_mmcr->drcbendadr);
+ drccfg = readw(&sc520_mmcr->drccfg);
+
+ /* Setup SDRAM Bank to largest possible size */
+ writew(0x000b << (bank * 4), &sc520_mmcr->drccfg);
+
+ /* Set ending address for this bank */
+ writel(0x000000ff << (bank * 8), &sc520_mmcr->drcbendadr);
+
+ /* write col 11 wrap adr */
+ if (write_and_test(COL11_DATA, COL11_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write col 10 wrap adr */
+ if (write_and_test(COL10_DATA, COL10_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write col 9 wrap adr */
+ if (write_and_test(COL09_DATA, COL09_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write col 8 wrap adr */
+ if (write_and_test(COL08_DATA, COL08_ADR) != 0)
+ goto restore_and_exit;
+
+ col_data = readl(COL11_ADR);
+
+ /* All four bytes in the read long must be the same */
+ if (check_long(col_data) < 0)
+ goto restore_and_exit;
+
+ if ((col_data >= COL08_DATA) && (col_data <= COL11_DATA))
+ columns = (u8)(col_data & 0x000000ff);
+ else
+ goto restore_and_exit;
+
+ /* write row 14 wrap adr */
+ if (write_and_test(ROW14_DATA, ROW14_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write row 13 wrap adr */
+ if (write_and_test(ROW13_DATA, ROW13_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write row 12 wrap adr */
+ if (write_and_test(ROW12_DATA, ROW12_ADR) != 0)
+ goto restore_and_exit;
+
+ /* write row 11 wrap adr */
+ if (write_and_test(ROW11_DATA, ROW11_ADR) != 0)
+ goto restore_and_exit;
+
+ if (write_and_test(ROW10_DATA, ROW10_ADR) != 0)
+ goto restore_and_exit;
+
+ /*
+ * read data @ row 12 wrap adr to determine number of banks,
+ * and read data @ row 14 wrap adr to determine number of rows.
+ * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
+ * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
+ * if data @ row 12 wrap == 11 or 12, we have 4 banks,
+ */
+ row_data = readl(ROW12_ADR);
+
+ /* All four bytes in the read long must be the same */
+ if (check_long(row_data) != 0)
+ goto restore_and_exit;
+
+ switch (row_data) {
+ case ROW10_DATA:
+ banks = 2;
+ break;
+
+ case ROW11_DATA:
+ case ROW12_DATA:
+ banks = 4;
+ break;
+
+ default:
+ goto restore_and_exit;
+ }
+
+ row_data = readl(ROW14_ADR);
+
+ /* All four bytes in the read long must be the same */
+ if (check_long(row_data) != 0)
+ goto restore_and_exit;
+
+ switch (row_data) {
+ case ROW11_DATA:
+ case ROW12_DATA:
+ case ROW13_DATA:
+ case ROW14_DATA:
+ rows = (u8)(row_data & 0x000000ff);
+ break;
+
+ default:
+ goto restore_and_exit;
+ }
+
+ bank_info->banks = banks;
+ bank_info->columns = columns;
+ bank_info->rows = rows;
+
+ if ((bank_info->banks != 0) &&
+ (bank_info->columns != 0) &&
+ (bank_info->rows != 0)) {
+ bank_info->size = bank_info->rows;
+ bank_info->size >>= (11 - bank_info->columns);
+ bank_info->size++;
+ }
+
+restore_and_exit:
+ /* Restore configuration */
+ writel(drcbendadr, &sc520_mmcr->drcbendadr);
+ writew(drccfg, &sc520_mmcr->drccfg);
+}
+
+static void sc520_setup_sizemem(void)
+{
+ u8 i;
+
+ /* Disable write buffer */
+ writeb(0x00, &sc520_mmcr->dbctl);
+
+ /* Disable ECC */
+ writeb(0x00, &sc520_mmcr->eccctl);
+
+ /* Set slowest SDRAM timing */
+ writeb(0x1e, &sc520_mmcr->drctmctl);
+
+ /* Issue a NOP to all SDRAM banks */
+ sc520_issue_sdram_op_mode_select(0x01);
+
+ /* Delay for 100 microseconds */
+ udelay(100);
+
+ /* Issue 'All Banks Precharge' command */
+ sc520_issue_sdram_op_mode_select(0x02);
+
+ /* Issue 2 'Auto Refresh Enable' command */
+ sc520_issue_sdram_op_mode_select(0x04);
+ sc520_dummy_write();
+
+ /* Issue 'Load Mode Register' command */
+ sc520_issue_sdram_op_mode_select(0x03);
+
+ /* Issue 8 more 'Auto Refresh Enable' commands */
+ sc520_issue_sdram_op_mode_select(0x04);
+ for (i = 0; i < 7; i++)
+ sc520_dummy_write();
+
+ /* Set control register to 'Normal Mode' */
+ writeb(0x00, &sc520_mmcr->drcctl);
+}
+
+static void sc520_sizemem(void)
+{
+ struct sc520_sdram_info sdram_info[4];
+ u8 bank_config = 0x00;
+ u8 end_addr = 0x00;
+ u16 drccfg = 0x0000;
+ u32 drcbendadr = 0x00000000;
+ u8 i;
+
+ /* Use PARs to disable caching of maximum allowable 256MB SDRAM */
+ writel(SC520_SDRAM1_PAR | SC520_PAR_CACHE_DIS, &sc520_mmcr->par[3]);
+ writel(SC520_SDRAM2_PAR | SC520_PAR_CACHE_DIS, &sc520_mmcr->par[4]);
+
+ sc520_setup_sizemem();
+
+ gd->ram_size = 0;
+
+ /* Size each SDRAM bank */
+ for (i = 0; i <= 3; i++) {
+ sc520_get_bank_info(i, &sdram_info[i]);
+
+ if (sdram_info[i].banks != 0) {
+ /* Update Configuration register */
+ bank_config = sdram_info[i].columns - 8;
+
+ if (sdram_info[i].banks == 4)
+ bank_config |= 0x08;
+
+ drccfg |= bank_config << (i * 4);
+
+ /* Update End Address register */
+ end_addr += sdram_info[i].size;
+ drcbendadr |= (end_addr | 0x80) << (i * 8);
+
+ gd->ram_size += sdram_info[i].size << 22;
+ }
+
+ /* Issue 'All Banks Precharge' command */
+ sc520_issue_sdram_op_mode_select(0x02);
+
+ /* Set control register to 'Normal Mode' */
+ writeb(0x00, &sc520_mmcr->drcctl);
+ }
+
+ writel(drcbendadr, &sc520_mmcr->drcbendadr);
+ writew(drccfg, &sc520_mmcr->drccfg);
+
+ /* Clear PARs preventing caching of SDRAM */
+ writel(0x00000000, &sc520_mmcr->par[3]);
+ writel(0x00000000, &sc520_mmcr->par[4]);
+}
+
+#if CONFIG_SYS_SDRAM_ECC_ENABLE
+static void sc520_enable_ecc(void)
+
+ /* A nominal memory test: just a byte at each address line */
+ movl %eax, %ecx
+ shrl $0x1, %ecx
+ movl $0x1, %edi
+memtest0:
+ movb $0xa5, (%edi)
+ cmpb $0xa5, (%edi)
+ jne out
+ shrl $0x1, %ecx
+ andl %ecx, %ecx
+ jz set_ecc
+ shll $0x1, %edi
+ jmp memtest0
+
+set_ecc:
+ /* clear all ram with a memset */
+ movl %eax, %ecx
+ xorl %esi, %esi
+ xorl %edi, %edi
+ xorl %eax, %eax
+ shrl $0x2, %ecx
+ cld
+ rep stosl
+
+ /* enable read, write buffers */
+ movb $0x11, %al
+ movl $DBCTL, %edi
+ movb %al, (%edi)
+
+ /* enable NMI mapping for ECC */
+ movl $ECCINT, %edi
+ movb $0x10, %al
+ movb %al, (%edi)
+
+ /* Turn on ECC */
+ movl $ECCCTL, %edi
+ movb $0x05, %al
+ movb %al,(%edi)
+
+out:
+ jmp init_ecc_ret
+}
+#endif
+
+int dram_init(void)
+{
+ ulong dram_ctrl;
+ ulong dram_present = 0x00000000;
+
+ /*
+ * We read-back the configuration of the dram
+ * controller that the assembly code wrote
+ */
+ dram_ctrl = readl(&sc520_mmcr->drcbendadr);
+
+ gd->bd->bi_dram[0].start = 0;
+ if (dram_ctrl & 0x80) {
+ /* bank 0 enabled */
+ gd->bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22;
+ dram_present = gd->bd->bi_dram[1].start;
+ gd->bd->bi_dram[0].size = gd->bd->bi_dram[1].start;
+ } else {
+ gd->bd->bi_dram[0].size = 0;
+ gd->bd->bi_dram[1].start = gd->bd->bi_dram[0].start;
+ }
+
+ if (dram_ctrl & 0x8000) {
+ /* bank 1 enabled */
+ gd->bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14;
+ dram_present = gd->bd->bi_dram[2].start;
+ gd->bd->bi_dram[1].size = gd->bd->bi_dram[2].start -
+ gd->bd->bi_dram[1].start;
+ } else {
+ gd->bd->bi_dram[1].size = 0;
+ gd->bd->bi_dram[2].start = gd->bd->bi_dram[1].start;
+ }
+
+ if (dram_ctrl & 0x800000) {
+ /* bank 2 enabled */
+ gd->bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6;
+ dram_present = gd->bd->bi_dram[3].start;
+ gd->bd->bi_dram[2].size = gd->bd->bi_dram[3].start -
+ gd->bd->bi_dram[2].start;
+ } else {
+ gd->bd->bi_dram[2].size = 0;
+ gd->bd->bi_dram[3].start = gd->bd->bi_dram[2].start;
+ }
+
+ if (dram_ctrl & 0x80000000) {
+ /* bank 3 enabled */
+ dram_present = (dram_ctrl & 0x7f000000) >> 2;
+ gd->bd->bi_dram[3].size = dram_present -
+ gd->bd->bi_dram[3].start;
+ } else {
+ gd->bd->bi_dram[3].size = 0;
+ }
+
+ gd->ram_size = dram_present;
+
+ return 0;
+}
diff --git a/arch/i386/cpu/start.S b/arch/i386/cpu/start.S
index df9ca0d..95be5a2 100644
--- a/arch/i386/cpu/start.S
+++ b/arch/i386/cpu/start.S
@@ -82,29 +82,22 @@ car_init_ret:
* starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
*/
movl $CONFIG_SYS_INIT_SP_ADDR, %esp
+ movl $CONFIG_SYS_INIT_GD_ADDR, %ebp
- /* Skip memory initialization if not starting from cold-reset */
- movl %ebx, %ecx
- andl $GD_FLG_COLD_BOOT, %ecx
- jz skip_mem_init
+ /* Set Boot Flags in Global Data */
+ movl %ebx, (GD_FLAGS * 4)(%ebp)
- /* size memory */
- call mem_init
-
-skip_mem_init:
- /* fetch memory size (into %eax) */
- call get_mem_size
- movl %eax, %esp
+ /* Determine our load offset (and put in Global Data) */
+ call 1f
+1: popl %ecx
+ subl $1b, %ecx
+ movl %ecx, (GD_LOAD_OFF * 4)(%ebp)
-#if CONFIG_SYS_SDRAM_ECC_ENABLE
- /* Skip ECC initialization if not starting from cold-reset */
- movl %ebx, %ecx
- andl $GD_FLG_COLD_BOOT, %ecx
- jz skip_ecc_init
- call init_ecc
+ /* size memory */
+ call dram_init_f
-skip_init_ecc:
-#endif
+ /* Setup stack in SDRAM */
+ movl (GD_RAM_SIZE * 4)(%ebp), %esp
/* Test the stack */
pushl $0
@@ -118,21 +111,8 @@ skip_init_ecc:
wbinvd
- /* Determine our load offset */
- call 1f
-1: popl %ecx
- subl $1b, %ecx
-
- /* Set the upper memory limit parameter */
- subl $CONFIG_SYS_STACK_SIZE, %eax
-
- /* Pointer to temporary global data */
- movl $CONFIG_SYS_INIT_GD_ADDR, %edx
-
- /* %edx points to the global data structure */
- movl %esp, (GD_RAM_SIZE * 4)(%edx)
- movl %ebx, (GD_FLAGS * 4)(%edx)
- movl %ecx, (GD_LOAD_OFF * 4)(%edx)
+ /* Set parameter to board_init_f() to boot flags */
+ movl (GD_FLAGS * 4)(%ebp), %eax
call board_init_f /* Enter, U-boot! */
diff --git a/arch/i386/include/asm/ic/sc520.h b/arch/i386/include/asm/ic/sc520.h
index 5e7fb47..956c1c2 100644
--- a/arch/i386/include/asm/ic/sc520.h
+++ b/arch/i386/include/asm/ic/sc520.h
@@ -285,6 +285,36 @@ extern sc520_mmcr_t *sc520_mmcr;
#define SC520_PAR14 (SC520_PAR0 + (0x04 * 14))
#define SC520_PAR15 (SC520_PAR0 + (0x04 * 15))
+/*
+ * PARs for maximum allowable 256MB of SDRAM @ 0x00000000
+ * Two PARs are required due to maximum PAR size of 128MB
+ * These are used in the SDRAM sizing code to disable caching
+ *
+ * 111 0 0 0 1 11111111111 00000000000000 }- 0xe3ffc000
+ * 111 0 0 0 1 11111111111 00100000000000 }- 0xe3ffc800
+ * \ / | | | | \----+----/ \-----+------/
+ * | | | | | | +---------- Start at 0x00000000
+ * | | | | | | 0x08000000
+ * | | | | | +----------------------- 128MB Region Size
+ * | | | | | ((2047 + 1) * 64kB)
+ * | | | | +------------------------------ 64kB Page Size
+ * | | | +-------------------------------- Writes Enabled
+ * | | +---------------------------------- Caching Enabled
+ * | +------------------------------------ Execution Enabled
+ * +--------------------------------------- SDRAM
+ */
+#define SC520_SDRAM1_PAR 0xe3ffc000
+#define SC520_SDRAM2_PAR 0xe3ffc800
+
+#define SC520_PAR_WRITE_DIS 0x04000000
+#define SC520_PAR_CACHE_DIS 0x08000000
+#define SC520_PAR_EXEC_DIS 0x10000000
+
+/*
+ * Programmable Address Regions to cover 256MB SDRAM (Maximum supported)
+ * required for DRAM sizing code
+ */
+
/* MMCR Register bits (not all of them :) ) */
/* SSI Stuff */
@@ -315,6 +345,33 @@ extern sc520_mmcr_t *sc520_mmcr;
#define UART2_DIS 0x02 /* UART2 Disable */
#define UART1_DIS 0x01 /* UART1 Disable */
+/*
+ * Defines used for SDRAM Sizing (number of columns and rows)
+ * Refer to section 10.6.4 - SDRAM Sizing Algorithm in the
+ * Elan SC520 Microcontroller User's Manual (Order #22004B)
+ */
+#define CACHELINESZ 0x00000010
+
+#define COL11_ADR 0x0e001e00
+#define COL10_ADR 0x0e000e00
+#define COL09_ADR 0x0e000600
+#define COL08_ADR 0x0e000200
+#define COL11_DATA 0x0b0b0b0b
+#define COL10_DATA 0x0a0a0a0a
+#define COL09_DATA 0x09090909
+#define COL08_DATA 0x08080808
+
+#define ROW14_ADR 0x0f000000
+#define ROW13_ADR 0x07000000
+#define ROW12_ADR 0x03000000
+#define ROW11_ADR 0x01000000
+#define ROW10_ADR 0x00000000
+#define ROW14_DATA 0x3f3f3f3f
+#define ROW13_DATA 0x1f1f1f1f
+#define ROW12_DATA 0x0f0f0f0f
+#define ROW11_DATA 0x07070707
+#define ROW10_DATA 0xaaaaaaaa
+
/* 0x28000000 - 0x3fffffff is used by the flash banks */
/* 0x40000000 - 0xffffffff is not adressable by the SC520 */
diff --git a/arch/i386/lib/board.c b/arch/i386/lib/board.c
index 4227312..d716232 100644
--- a/arch/i386/lib/board.c
+++ b/arch/i386/lib/board.c
@@ -176,7 +176,7 @@ gd_t *gd;
/*
* Load U-Boot into RAM, initialize BSS, perform relocation adjustments
*/
-void board_init_f(ulong mem_top)
+void board_init_f(ulong boot_flags)
{
void *text_start = &__text_start;
void *data_end = &__data_end;
@@ -194,8 +194,12 @@ void board_init_f(ulong mem_top)
Elf32_Rel *re_src;
Elf32_Rel *re_end;
+ gd->flags = boot_flags;
+
/* Calculate destination RAM Address and relocation offset */
- dest_addr = (void *)mem_top - (bss_end - text_start);
+ dest_addr = (void *)gd->ram_size;
+ dest_addr -= CONFIG_SYS_STACK_SIZE;
+ dest_addr -= (bss_end - text_start);
rel_offset = text_start - dest_addr;
/* Perform low-level initialization only when cold booted */
diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c
index e64a395..dd0ce54 100644
--- a/board/eNET/eNET.c
+++ b/board/eNET/eNET.c
@@ -160,12 +160,6 @@ int board_early_init_r(void)
return 0;
}
-int dram_init(void)
-{
- init_sc520_dram();
- return 0;
-}
-
void show_boot_progress(int val)
{
uchar led_mask;
diff --git a/board/eNET/eNET_start16.S b/board/eNET/eNET_start16.S
index 4835936..77e5519 100644
--- a/board/eNET/eNET_start16.S
+++ b/board/eNET/eNET_start16.S
@@ -57,11 +57,6 @@ board_init16:
movl $CONFIG_SYS_SC520_LLIO_PAR, %eax
movl %eax, (%di)
- /* Disable SDRAM write buffer */
- movw $(SC520_DBCTL - SC520_MMCR_BASE), %di
- xorw %ax, %ax
- movb %al, (%di)
-
/* Disabe MMCR alias */
movw $0xfffc, %dx
movl $0x000000cb, %eax
diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index 0891e1b..f50d36d 100644
--- a/include/configs/eNET.h
+++ b/include/configs/eNET.h
@@ -136,11 +136,11 @@
* SDRAM Configuration
*/
#define CONFIG_SYS_SDRAM_DRCTMCTL 0x18
+#define CONFIG_SYS_SDRAM_REFRESH_RATE 156
#define CONFIG_NR_DRAM_BANKS 4
/* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/
#undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY
-#undef CONFIG_SYS_SDRAM_REFRESH_RATE
#undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY
#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
#undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T