summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2013-10-08 09:03:15 -0400
committerTom Rini <trini@ti.com>2013-10-08 09:03:15 -0400
commit968294bd7b9b540f53c1fb3c809da464623a4362 (patch)
tree141a04ec65894787e2d7c4eda808ef700b81101f
parentb770e88a6c2548727f0d57a3e9e8bb0830f977b5 (diff)
parentc4a796329d00ce46de6b5afeb1fdabec82830677 (diff)
downloadu-boot-imx-968294bd7b9b540f53c1fb3c809da464623a4362.zip
u-boot-imx-968294bd7b9b540f53c1fb3c809da464623a4362.tar.gz
u-boot-imx-968294bd7b9b540f53c1fb3c809da464623a4362.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-spi
-rw-r--r--arch/arm/cpu/armv7/omap5/hw_data.c10
-rw-r--r--arch/arm/cpu/armv7/omap5/prcm-regs.c1
-rw-r--r--arch/arm/include/asm/arch-exynos/spi.h11
-rw-r--r--arch/arm/include/asm/arch-omap5/omap.h3
-rw-r--r--arch/arm/include/asm/arch-omap5/spl.h1
-rw-r--r--arch/arm/include/asm/omap_common.h1
-rw-r--r--board/ti/dra7xx/mux_data.h10
-rw-r--r--doc/SPI/README.ti_qspi_dra_test48
-rw-r--r--doc/SPI/README.ti_qspi_flash47
-rw-r--r--doc/SPI/status.txt31
-rw-r--r--drivers/mtd/spi/Makefile15
-rw-r--r--drivers/mtd/spi/atmel.c544
-rw-r--r--drivers/mtd/spi/eon.c60
-rw-r--r--drivers/mtd/spi/gigadevice.c65
-rw-r--r--drivers/mtd/spi/macronix.c98
-rw-r--r--drivers/mtd/spi/ramtron.c122
-rw-r--r--drivers/mtd/spi/sf.c54
-rw-r--r--drivers/mtd/spi/sf_internal.h (renamed from drivers/mtd/spi/spi_flash_internal.h)140
-rw-r--r--drivers/mtd/spi/sf_ops.c405
-rw-r--r--drivers/mtd/spi/sf_probe.c363
-rw-r--r--drivers/mtd/spi/spansion.c141
-rw-r--r--drivers/mtd/spi/spi_flash.c615
-rw-r--r--drivers/mtd/spi/sst.c238
-rw-r--r--drivers/mtd/spi/stmicro.c202
-rw-r--r--drivers/mtd/spi/winbond.c141
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/exynos_spi.c107
-rw-r--r--drivers/spi/ti_qspi.c311
-rw-r--r--include/common.h6
-rw-r--r--include/configs/dra7xx_evm.h19
-rw-r--r--include/configs/top9000.h1
-rw-r--r--include/spi.h100
-rw-r--r--include/spi_flash.h103
33 files changed, 1696 insertions, 2318 deletions
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index fbbc486..a1b249e 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -170,7 +170,7 @@ static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
{32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */
- {96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 20 MHz */
+ {96, 4, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 20 MHz */
{160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */
{20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */
{192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */
@@ -426,6 +426,10 @@ void enable_basic_clocks(void)
#ifdef CONFIG_DRIVER_TI_CPSW
(*prcm)->cm_gmac_gmac_clkctrl,
#endif
+
+#ifdef CONFIG_TI_QSPI
+ (*prcm)->cm_l4per_qspi_clkctrl,
+#endif
0
};
@@ -454,6 +458,10 @@ void enable_basic_clocks(void)
clk_modules_explicit_en_essential,
1);
+#ifdef CONFIG_TI_QSPI
+ setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
+#endif
+
/* Enable SCRM OPT clocks for PER and CORE dpll */
setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
OPTFCLKEN_SCRM_PER_MASK);
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 5a3d52c..7a7cade 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -921,6 +921,7 @@ struct prcm_regs const dra7xx_prcm = {
.cm_l4per_gpio8_clkctrl = 0x4a009818,
.cm_l4per_mmcsd3_clkctrl = 0x4a009820,
.cm_l4per_mmcsd4_clkctrl = 0x4a009828,
+ .cm_l4per_qspi_clkctrl = 0x4a009838,
.cm_l4per_uart1_clkctrl = 0x4a009840,
.cm_l4per_uart2_clkctrl = 0x4a009848,
.cm_l4per_uart3_clkctrl = 0x4a009850,
diff --git a/arch/arm/include/asm/arch-exynos/spi.h b/arch/arm/include/asm/arch-exynos/spi.h
index fb23aa6..147c1a7 100644
--- a/arch/arm/include/asm/arch-exynos/spi.h
+++ b/arch/arm/include/asm/arch-exynos/spi.h
@@ -22,7 +22,7 @@ struct exynos_spi {
unsigned int rx_data; /* 0x1c */
unsigned int pkt_cnt; /* 0x20 */
unsigned char reserved2[4];
- unsigned char reserved3[4];
+ unsigned int swap_cfg; /* 0x28 */
unsigned int fb_clk; /* 0x2c */
unsigned char padding[0xffd0];
};
@@ -62,5 +62,14 @@ struct exynos_spi {
/* Packet Count */
#define SPI_PACKET_CNT_EN (1 << 16)
+/* Swap config */
+#define SPI_TX_SWAP_EN (1 << 0)
+#define SPI_TX_BYTE_SWAP (1 << 2)
+#define SPI_TX_HWORD_SWAP (1 << 3)
+#define SPI_TX_BYTE_SWAP (1 << 2)
+#define SPI_RX_SWAP_EN (1 << 4)
+#define SPI_RX_BYTE_SWAP (1 << 6)
+#define SPI_RX_HWORD_SWAP (1 << 7)
+
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index e9a51d3..414d37a 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -61,6 +61,9 @@
/* GPMC */
#define OMAP54XX_GPMC_BASE 0x50000000
+/* QSPI */
+#define QSPI_BASE 0x4B300000
+
/*
* Hardware Register Details
*/
diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h
index fe8b0c0..57f0de5 100644
--- a/arch/arm/include/asm/arch-omap5/spl.h
+++ b/arch/arm/include/asm/arch-omap5/spl.h
@@ -15,6 +15,7 @@
#define BOOT_DEVICE_MMC1 5
#define BOOT_DEVICE_MMC2 6
#define BOOT_DEVICE_MMC2_2 7
+#define BOOT_DEVICE_SPI 10
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 61fee9f..3a998cc 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -266,6 +266,7 @@ struct prcm_regs {
u32 cm_l4per_mmcsd4_clkctrl;
u32 cm_l4per_msprohg_clkctrl;
u32 cm_l4per_slimbus2_clkctrl;
+ u32 cm_l4per_qspi_clkctrl;
u32 cm_l4per_uart1_clkctrl;
u32 cm_l4per_uart2_clkctrl;
u32 cm_l4per_uart3_clkctrl;
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 0a86594..6965cc5 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -51,5 +51,15 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
{RGMII0_RXD2, (IEN | M0) },
{RGMII0_RXD1, (IEN | M0) },
{RGMII0_RXD0, (IEN | M0) },
+ {GPMC_A13, (IEN | PDIS | M1)}, /* QSPI1_RTCLK */
+ {GPMC_A14, (IEN | PDIS | M1)}, /* QSPI1_D[3] */
+ {GPMC_A15, (IEN | PDIS | M1)}, /* QSPI1_D[2] */
+ {GPMC_A16, (IEN | PDIS | M1)}, /* QSPI1_D[1] */
+ {GPMC_A17, (IEN | PDIS | M1)}, /* QSPI1_D[0] */
+ {GPMC_A18, (M1)}, /* QSPI1_SCLK */
+ {GPMC_A3, (IEN | PDIS | M1)}, /* QSPI1_CS2 */
+ {GPMC_A4, (IEN | PDIS | M1)}, /* QSPI1_CS3 */
+ {GPMC_CS2, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS0 */
+ {GPMC_CS3, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS1*/
};
#endif /* _MUX_DATA_DRA7XX_H_ */
diff --git a/doc/SPI/README.ti_qspi_dra_test b/doc/SPI/README.ti_qspi_dra_test
new file mode 100644
index 0000000..fe37857
--- /dev/null
+++ b/doc/SPI/README.ti_qspi_dra_test
@@ -0,0 +1,48 @@
+-------------------------------------------------
+ Simple steps used to test the QSPI at U-Boot
+-------------------------------------------------
+
+For #1, build the patched U-Boot and load MLO/u-boot.img
+
+----------------------------------
+Boot from another medium like MMC
+----------------------------------
+
+U-Boot# mmc dev 0
+mmc0 is current device
+U-Boot# fatload mmc 0 0x82000000 MLO
+reading MLO
+55872 bytes read in 8 ms (6.7 MiB/s)
+U-Boot# fatload mmc 0 0x83000000 u-boot.img
+reading u-boot.img
+248600 bytes read in 19 ms (12.5 MiB/s)
+
+--------------------------------------------------
+Commands to erase/write u-boot/mlo to flash device
+--------------------------------------------------
+U-Boot# sf probe 0
+SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB, mapped at 5c000000
+SF: Warning - Only lower 16MiB accessible, Full access #define CONFIG_SPI_FLASH_BAR
+U-Boot# sf erase 0 0x10000
+SF: 65536 bytes @ 0x0 Erased: OK
+U-Boot# sf erase 0x20000 0x10000
+SF: 65536 bytes @ 0x20000 Erased: OK
+U-Boot# sf erase 0x30000 0x10000
+SF: 65536 bytes @ 0x30000 Erased: OK
+U-Boot# sf erase 0x40000 0x10000
+SF: 65536 bytes @ 0x40000 Erased: OK
+U-Boot# sf erase 0x50000 0x10000
+SF: 65536 bytes @ 0x50000 Erased: OK
+U-Boot# sf erase 0x60000 0x10000
+SF: 65536 bytes @ 0x60000 Erased: OK
+U-Boot# sf write 82000000 0 0x10000
+SF: 65536 bytes @ 0x0 Written: OK
+U-Boot# sf write 83000000 0x20000 0x60000
+SF: 393216 bytes @ 0x20000 Written: OK
+
+For #2, set sysboot to QSPI-1 boot mode(SYSBOOT[5:0] = 100110) and power
+on. ROM should find the GP header at offset 0 and load/execute SPL. SPL
+then detects that ROM was in QSPI-1 mode (boot code 10) and attempts to
+find a U-Boot image header at offset 0x20000 (set in the config file)
+and proceeds to load that image using the U-Boot image payload offset/size
+from the header. It will then start U-Boot.
diff --git a/doc/SPI/README.ti_qspi_flash b/doc/SPI/README.ti_qspi_flash
new file mode 100644
index 0000000..1b86d01
--- /dev/null
+++ b/doc/SPI/README.ti_qspi_flash
@@ -0,0 +1,47 @@
+QSPI U-boot support
+------------------
+
+Host processor is connected to serial flash device via qpsi
+interface. QSPI is a kind of spi module that allows single,
+dual and quad read access to external spi devices. The module
+has a memory mapped interface which provide direct interface
+for accessing data form external spi devices.
+
+The one QSPI in the device is primarily intended for fast booting
+from Quad SPI flash devices.
+
+Usecase
+-------
+
+MLO/u-boot.img will be flashed from SD/MMC to the flash device
+using serial flash erase and write commands. Then, switch settings
+will be changed to qspi boot. Then, the ROM code will read MLO
+from the predefined location in the flash, where it was flashed and
+execute it after storing it in SDRAM. Then, the MLO will read
+u-boot.img from flash and execute it from SDRAM.
+
+SPI mode
+-------
+SPI mode uses mtd spi framework for transfer and reception of data.
+Can be used in:
+1. Normal mode: use single pin for transfers
+2. Dual Mode: use two pins for transfers.
+3. Quad mode: use four pin for transfer
+
+Memory mapped read mode
+-----------------------
+In this, SPI controller is configured using configuration port and then
+controler is switched to memory mapped port for data read.
+
+Driver
+------
+drivers/qspi/ti_qspi.c
+ - Newly created file which is responsible for configuring the
+ qspi controller and also for providing the low level api which
+ is responsible for transferring the datas from host controller
+ to flash device and vice versa.
+
+Testing
+-------
+A seperated file named README.dra_qspi_test has been created which gives all the
+details about the commands required to test qspi at u-boot level.
diff --git a/doc/SPI/status.txt b/doc/SPI/status.txt
new file mode 100644
index 0000000..62c3c85
--- /dev/null
+++ b/doc/SPI/status.txt
@@ -0,0 +1,31 @@
+Status on SPI subsystem:
+=======================
+
+SPI COMMAND (common/cmd_sf, cmd_spi):
+-
+
+SPI FLASH (drivers/mtd/spi):
+- sf_probe.c: SPI flash probing code.
+- sf_ops.c: SPI flash operations code.
+- sf.c: SPI flash interface, which interacts controller driver.
+- Bank Address Register (Accessing flashes > 16Mbytes in 3-byte addressing)
+- Added memory_mapped support for read operations.
+- Common probe support for all supported flash vendors except, ramtron.
+
+SPI DRIVERS (drivers/spi):
+-
+
+TODO:
+- Runtime detection of spi_flash params, SFDP(if possible)
+- Add support for multibus build/accessing.
+- Extended read commands support(dual read, dual IO read)
+- Quad Page Program support.
+- Quad Read support(quad fast read, quad IO read)
+- Dual flash connection topology support(accessing two spi flash memories with single cs)
+- Banking support on dual flash connection topology.
+- Need proper cleanups on spi_flash and drivers.
+
+--
+Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
+18-09-2013.
+07-10-2013.
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 191138a..86ffc59 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -14,16 +14,11 @@ COBJS-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o
COBJS-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o
endif
-COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o
-COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o
-COBJS-$(CONFIG_SPI_FLASH_EON) += eon.o
-COBJS-$(CONFIG_SPI_FLASH_GIGADEVICE) += gigadevice.o
-COBJS-$(CONFIG_SPI_FLASH_MACRONIX) += macronix.o
-COBJS-$(CONFIG_SPI_FLASH_SPANSION) += spansion.o
-COBJS-$(CONFIG_SPI_FLASH_SST) += sst.o
-COBJS-$(CONFIG_SPI_FLASH_STMICRO) += stmicro.o
-COBJS-$(CONFIG_SPI_FLASH_WINBOND) += winbond.o
-COBJS-$(CONFIG_SPI_FRAM_RAMTRON) += ramtron.o
+ifdef CONFIG_CMD_SF
+COBJS-y += sf.o
+endif
+COBJS-$(CONFIG_SPI_FLASH) += sf_probe.o sf_ops.o
+COBJS-$(CONFIG_SPI_FRAM_RAMTRON) += ramtron.o
COBJS-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o
COBJS := $(COBJS-y)
diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c
deleted file mode 100644
index f34df43..0000000
--- a/drivers/mtd/spi/atmel.c
+++ /dev/null
@@ -1,544 +0,0 @@
-/*
- * Atmel SPI DataFlash support
- *
- * Copyright (C) 2008 Atmel Corporation
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi_flash.h>
-
-#include "spi_flash_internal.h"
-
-/* AT45-specific commands */
-#define CMD_AT45_READ_STATUS 0xd7
-#define CMD_AT45_ERASE_PAGE 0x81
-#define CMD_AT45_LOAD_PROG_BUF1 0x82
-#define CMD_AT45_LOAD_BUF1 0x84
-#define CMD_AT45_LOAD_PROG_BUF2 0x85
-#define CMD_AT45_LOAD_BUF2 0x87
-#define CMD_AT45_PROG_BUF1 0x88
-#define CMD_AT45_PROG_BUF2 0x89
-
-/* AT45 status register bits */
-#define AT45_STATUS_P2_PAGE_SIZE (1 << 0)
-#define AT45_STATUS_READY (1 << 7)
-
-/* DataFlash family IDs, as obtained from the second idcode byte */
-#define DF_FAMILY_AT26F 0
-#define DF_FAMILY_AT45 1
-#define DF_FAMILY_AT26DF 2 /* AT25DF and AT26DF */
-
-struct atmel_spi_flash_params {
- u8 idcode1;
- /* Log2 of page size in power-of-two mode */
- u8 l2_page_size;
- u8 pages_per_block;
- u8 blocks_per_sector;
- u8 nr_sectors;
- const char *name;
-};
-
-/* spi_flash needs to be first so upper layers can free() it */
-struct atmel_spi_flash {
- struct spi_flash flash;
- const struct atmel_spi_flash_params *params;
-};
-
-static inline struct atmel_spi_flash *
-to_atmel_spi_flash(struct spi_flash *flash)
-{
- return container_of(flash, struct atmel_spi_flash, flash);
-}
-
-static const struct atmel_spi_flash_params atmel_spi_flash_table[] = {
- {
- .idcode1 = 0x22,
- .l2_page_size = 8,
- .pages_per_block = 8,
- .blocks_per_sector = 16,
- .nr_sectors = 4,
- .name = "AT45DB011D",
- },
- {
- .idcode1 = 0x23,
- .l2_page_size = 8,
- .pages_per_block = 8,
- .blocks_per_sector = 16,
- .nr_sectors = 8,
- .name = "AT45DB021D",
- },
- {
- .idcode1 = 0x24,
- .l2_page_size = 8,
- .pages_per_block = 8,
- .blocks_per_sector = 32,
- .nr_sectors = 8,
- .name = "AT45DB041D",
- },
- {
- .idcode1 = 0x25,
- .l2_page_size = 8,
- .pages_per_block = 8,
- .blocks_per_sector = 32,
- .nr_sectors = 16,
- .name = "AT45DB081D",
- },
- {
- .idcode1 = 0x26,
- .l2_page_size = 9,
- .pages_per_block = 8,
- .blocks_per_sector = 32,
- .nr_sectors = 16,
- .name = "AT45DB161D",
- },
- {
- .idcode1 = 0x27,
- .l2_page_size = 9,
- .pages_per_block = 8,
- .blocks_per_sector = 64,
- .nr_sectors = 64,
- .name = "AT45DB321D",
- },
- {
- .idcode1 = 0x28,
- .l2_page_size = 10,
- .pages_per_block = 8,
- .blocks_per_sector = 32,
- .nr_sectors = 32,
- .name = "AT45DB642D",
- },
- {
- .idcode1 = 0x47,
- .l2_page_size = 8,
- .pages_per_block = 16,
- .blocks_per_sector = 16,
- .nr_sectors = 64,
- .name = "AT25DF321",
- },
-};
-
-static int at45_wait_ready(struct spi_flash *flash, unsigned long timeout)
-{
- struct spi_slave *spi = flash->spi;
- unsigned long timebase;
- int ret;
- u8 cmd = CMD_AT45_READ_STATUS;
- u8 status;
-
- timebase = get_timer(0);
-
- ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
- if (ret)
- return -1;
-
- do {
- ret = spi_xfer(spi, 8, NULL, &status, 0);
- if (ret)
- return -1;
-
- if (status & AT45_STATUS_READY)
- break;
- } while (get_timer(timebase) < timeout);
-
- /* Deactivate CS */
- spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
-
- if (status & AT45_STATUS_READY)
- return 0;
-
- /* Timed out */
- return -1;
-}
-
-/*
- * Assemble the address part of a command for AT45 devices in
- * non-power-of-two page size mode.
- */
-static void at45_build_address(struct atmel_spi_flash *asf, u8 *cmd, u32 offset)
-{
- unsigned long page_addr;
- unsigned long byte_addr;
- unsigned long page_size;
- unsigned int page_shift;
-
- /*
- * The "extra" space per page is the power-of-two page size
- * divided by 32.
- */
- page_shift = asf->params->l2_page_size;
- page_size = (1 << page_shift) + (1 << (page_shift - 5));
- page_shift++;
- page_addr = offset / page_size;
- byte_addr = offset % page_size;
-
- cmd[0] = page_addr >> (16 - page_shift);
- cmd[1] = page_addr << (page_shift - 8) | (byte_addr >> 8);
- cmd[2] = byte_addr;
-}
-
-static int dataflash_read_fast_at45(struct spi_flash *flash,
- u32 offset, size_t len, void *buf)
-{
- struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
- u8 cmd[5];
-
- cmd[0] = CMD_READ_ARRAY_FAST;
- at45_build_address(asf, cmd + 1, offset);
- cmd[4] = 0x00;
-
- return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
-}
-
-/*
- * TODO: the two write funcs (_p2/_at45) should get unified ...
- */
-static int dataflash_write_p2(struct spi_flash *flash,
- u32 offset, size_t len, const void *buf)
-{
- struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
- unsigned long page_size;
- u32 addr = offset;
- size_t chunk_len;
- size_t actual;
- int ret;
- u8 cmd[4];
-
- /*
- * TODO: This function currently uses only page buffer #1. We can
- * speed this up by using both buffers and loading one buffer while
- * the other is being programmed into main memory.
- */
-
- page_size = (1 << asf->params->l2_page_size);
-
- ret = spi_claim_bus(flash->spi);
- if (ret) {
- debug("SF: Unable to claim SPI bus\n");
- return ret;
- }
-
- for (actual = 0; actual < len; actual += chunk_len) {
- chunk_len = min(len - actual, page_size - (addr % page_size));
-
- /* Use the same address bits for both commands */
- cmd[0] = CMD_AT45_LOAD_BUF1;
- cmd[1] = addr >> 16;
- cmd[2] = addr >> 8;
- cmd[3] = addr;
-
- ret = spi_flash_cmd_write(flash->spi, cmd, 4,
- buf + actual, chunk_len);
- if (ret < 0) {
- debug("SF: Loading AT45 buffer failed\n");
- goto out;
- }
-
- cmd[0] = CMD_AT45_PROG_BUF1;
- ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
- if (ret < 0) {
- debug("SF: AT45 page programming failed\n");
- goto out;
- }
-
- ret = at45_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
- if (ret < 0) {
- debug("SF: AT45 page programming timed out\n");
- goto out;
- }
-
- addr += chunk_len;
- }
-
- debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n",
- len, offset);
- ret = 0;
-
-out:
- spi_release_bus(flash->spi);
- return ret;
-}
-
-static int dataflash_write_at45(struct spi_flash *flash,
- u32 offset, size_t len, const void *buf)
-{
- struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
- unsigned long page_addr;
- unsigned long byte_addr;
- unsigned long page_size;
- unsigned int page_shift;
- size_t chunk_len;
- size_t actual;
- int ret;
- u8 cmd[4];
-
- /*
- * TODO: This function currently uses only page buffer #1. We can
- * speed this up by using both buffers and loading one buffer while
- * the other is being programmed into main memory.
- */
-
- page_shift = asf->params->l2_page_size;
- page_size = (1 << page_shift) + (1 << (page_shift - 5));
- page_shift++;
- page_addr = offset / page_size;
- byte_addr = offset % page_size;
-
- ret = spi_claim_bus(flash->spi);
- if (ret) {
- debug("SF: Unable to claim SPI bus\n");
- return ret;
- }
-
- for (actual = 0; actual < len; actual += chunk_len) {
- chunk_len = min(len - actual, page_size - byte_addr);
-
- /* Use the same address bits for both commands */
- cmd[0] = CMD_AT45_LOAD_BUF1;
- cmd[1] = page_addr >> (16 - page_shift);
- cmd[2] = page_addr << (page_shift - 8) | (byte_addr >> 8);
- cmd[3] = byte_addr;
-
- ret = spi_flash_cmd_write(flash->spi, cmd, 4,
- buf + actual, chunk_len);
- if (ret < 0) {
- debug("SF: Loading AT45 buffer failed\n");
- goto out;
- }
-
- cmd[0] = CMD_AT45_PROG_BUF1;
- ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
- if (ret < 0) {
- debug("SF: AT45 page programming failed\n");
- goto out;
- }
-
- ret = at45_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
- if (ret < 0) {
- debug("SF: AT45 page programming timed out\n");
- goto out;
- }
-
- page_addr++;
- byte_addr = 0;
- }
-
- debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n",
- len, offset);
- ret = 0;
-
-out:
- spi_release_bus(flash->spi);
- return ret;
-}
-
-/*
- * TODO: the two erase funcs (_p2/_at45) should get unified ...
- */
-static int dataflash_erase_p2(struct spi_flash *flash, u32 offset, size_t len)
-{
- struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
- unsigned long page_size;
-
- size_t actual;
- int ret;
- u8 cmd[4];
-
- /*
- * TODO: This function currently uses page erase only. We can
- * probably speed things up by using block and/or sector erase
- * when possible.
- */
-
- page_size = (1 << asf->params->l2_page_size);
-
- if (offset % page_size || len % page_size) {
- debug("SF: Erase offset/length not multiple of page size\n");
- return -1;
- }
-
- cmd[0] = CMD_AT45_ERASE_PAGE;
- cmd[3] = 0x00;
-
- ret = spi_claim_bus(flash->spi);
- if (ret) {
- debug("SF: Unable to claim SPI bus\n");
- return ret;
- }
-
- for (actual = 0; actual < len; actual += page_size) {
- cmd[1] = offset >> 16;
- cmd[2] = offset >> 8;
-
- ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
- if (ret < 0) {
- debug("SF: AT45 page erase failed\n");
- goto out;
- }
-
- ret = at45_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
- if (ret < 0) {
- debug("SF: AT45 page erase timed out\n");
- goto out;
- }
-
- offset += page_size;
- }
-
- debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n",
- len, offset);
- ret = 0;
-
-out:
- spi_release_bus(flash->spi);
- return ret;
-}
-
-static int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len)
-{
- struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
- unsigned long page_addr;
- unsigned long page_size;
- unsigned int page_shift;
- size_t actual;
- int ret;
- u8 cmd[4];
-
- /*
- * TODO: This function currently uses page erase only. We can
- * probably speed things up by using block and/or sector erase
- * when possible.
- */
-
- page_shift = asf->params->l2_page_size;
- page_size = (1 << page_shift) + (1 << (page_shift - 5));
- page_shift++;
- page_addr = offset / page_size;
-
- if (offset % page_size || len % page_size) {
- debug("SF: Erase offset/length not multiple of page size\n");
- return -1;
- }
-
- cmd[0] = CMD_AT45_ERASE_PAGE;
- cmd[3] = 0x00;
-
- ret = spi_claim_bus(flash->spi);
- if (ret) {
- debug("SF: Unable to claim SPI bus\n");
- return ret;
- }
-
- for (actual = 0; actual < len; actual += page_size) {
- cmd[1] = page_addr >> (16 - page_shift);
- cmd[2] = page_addr << (page_shift - 8);
-
- ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
- if (ret < 0) {
- debug("SF: AT45 page erase failed\n");
- goto out;
- }
-
- ret = at45_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
- if (ret < 0) {
- debug("SF: AT45 page erase timed out\n");
- goto out;
- }
-
- page_addr++;
- }
-
- debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n",
- len, offset);
- ret = 0;
-
-out:
- spi_release_bus(flash->spi);
- return ret;
-}
-
-struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode)
-{
- const struct atmel_spi_flash_params *params;
- unsigned page_size;
- unsigned int family;
- struct atmel_spi_flash *asf;
- unsigned int i;
- int ret;
- u8 status;
-
- for (i = 0; i < ARRAY_SIZE(atmel_spi_flash_table); i++) {
- params = &atmel_spi_flash_table[i];
- if (params->idcode1 == idcode[1])
- break;
- }
-
- if (i == ARRAY_SIZE(atmel_spi_flash_table)) {
- debug("SF: Unsupported DataFlash ID %02x\n",
- idcode[1]);
- return NULL;
- }
-
- asf = spi_flash_alloc(struct atmel_spi_flash, spi, params->name);
- if (!asf) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
- }
-
- asf->params = params;
-
- /* Assuming power-of-two page size initially. */
- page_size = 1 << params->l2_page_size;
-
- family = idcode[1] >> 5;
-
- switch (family) {
- case DF_FAMILY_AT45:
- /*
- * AT45 chips have configurable page size. The status
- * register indicates which configuration is active.
- */
- ret = spi_flash_cmd(spi, CMD_AT45_READ_STATUS, &status, 1);
- if (ret)
- goto err;
-
- debug("SF: AT45 status register: %02x\n", status);
-
- if (!(status & AT45_STATUS_P2_PAGE_SIZE)) {
- asf->flash.read = dataflash_read_fast_at45;
- asf->flash.write = dataflash_write_at45;
- asf->flash.erase = dataflash_erase_at45;
- page_size += 1 << (params->l2_page_size - 5);
- } else {
- asf->flash.write = dataflash_write_p2;
- asf->flash.erase = dataflash_erase_p2;
- }
-
- asf->flash.page_size = page_size;
- asf->flash.sector_size = page_size;
- break;
-
- case DF_FAMILY_AT26F:
- case DF_FAMILY_AT26DF:
- asf->flash.page_size = page_size;
- asf->flash.sector_size = 4096;
- /* clear SPRL# bit for locked flash */
- spi_flash_cmd_write_status(&asf->flash, 0);
- break;
-
- default:
- debug("SF: Unsupported DataFlash family %u\n", family);
- goto err;
- }
-
- asf->flash.size = page_size * params->pages_per_block
- * params->blocks_per_sector
- * params->nr_sectors;
-
- return &asf->flash;
-
-err:
- free(asf);
- return NULL;
-}
diff --git a/drivers/mtd/spi/eon.c b/drivers/mtd/spi/eon.c
deleted file mode 100644
index 25cfc12..0000000
--- a/drivers/mtd/spi/eon.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * (C) Copyright 2010, ucRobotics Inc.
- * Author: Chong Huang <chuang@ucrobotics.com>
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi_flash.h>
-
-#include "spi_flash_internal.h"
-
-struct eon_spi_flash_params {
- u8 idcode1;
- u16 nr_sectors;
- const char *name;
-};
-
-static const struct eon_spi_flash_params eon_spi_flash_table[] = {
- {
- .idcode1 = 0x16,
- .nr_sectors = 1024,
- .name = "EN25Q32B",
- },
- {
- .idcode1 = 0x18,
- .nr_sectors = 4096,
- .name = "EN25Q128",
- },
-};
-
-struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode)
-{
- const struct eon_spi_flash_params *params;
- struct spi_flash *flash;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(eon_spi_flash_table); ++i) {
- params = &eon_spi_flash_table[i];
- if (params->idcode1 == idcode[2])
- break;
- }
-
- if (i == ARRAY_SIZE(eon_spi_flash_table)) {
- debug("SF: Unsupported EON ID %02x\n", idcode[1]);
- return NULL;
- }
-
- flash = spi_flash_alloc_base(spi, params->name);
- if (!flash) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
- }
-
- flash->page_size = 256;
- flash->sector_size = 256 * 16 * 16;
- flash->size = 256 * 16 * params->nr_sectors;
-
- return flash;
-}
diff --git a/drivers/mtd/spi/gigadevice.c b/drivers/mtd/spi/gigadevice.c
deleted file mode 100644
index b42581a..0000000
--- a/drivers/mtd/spi/gigadevice.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Gigadevice SPI flash driver
- * Copyright 2013, Samsung Electronics Co., Ltd.
- * Author: Banajit Goswami <banajit.g@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi_flash.h>
-
-#include "spi_flash_internal.h"
-
-struct gigadevice_spi_flash_params {
- uint16_t id;
- uint16_t nr_blocks;
- const char *name;
-};
-
-static const struct gigadevice_spi_flash_params gigadevice_spi_flash_table[] = {
- {
- .id = 0x6016,
- .nr_blocks = 64,
- .name = "GD25LQ",
- },
- {
- .id = 0x4017,
- .nr_blocks = 128,
- .name = "GD25Q64B",
- },
-};
-
-struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode)
-{
- const struct gigadevice_spi_flash_params *params;
- struct spi_flash *flash;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(gigadevice_spi_flash_table); i++) {
- params = &gigadevice_spi_flash_table[i];
- if (params->id == ((idcode[1] << 8) | idcode[2]))
- break;
- }
-
- if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) {
- debug("SF: Unsupported Gigadevice ID %02x%02x\n",
- idcode[1], idcode[2]);
- return NULL;
- }
-
- flash = spi_flash_alloc_base(spi, params->name);
- if (!flash) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
- }
- /* page_size */
- flash->page_size = 256;
- /* sector_size = page_size * pages_per_sector */
- flash->sector_size = flash->page_size * 16;
- /* size = sector_size * sector_per_block * number of blocks */
- flash->size = flash->sector_size * 16 * params->nr_blocks;
-
- return flash;
-}
diff --git a/drivers/mtd/spi/macronix.c b/drivers/mtd/spi/macronix.c
deleted file mode 100644
index 70435eb..0000000
--- a/drivers/mtd/spi/macronix.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Copyright 2009(C) Marvell International Ltd. and its affiliates
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * Based on drivers/mtd/spi/stmicro.c
- *
- * Copyright 2008, Network Appliance Inc.
- * Jason McMullan <mcmullan@netapp.com>
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi_flash.h>
-
-#include "spi_flash_internal.h"
-
-struct macronix_spi_flash_params {
- u16 idcode;
- u16 nr_blocks;
- const char *name;
-};
-
-static const struct macronix_spi_flash_params macronix_spi_flash_table[] = {
- {
- .idcode = 0x2013,
- .nr_blocks = 8,
- .name = "MX25L4005",
- },
- {
- .idcode = 0x2014,
- .nr_blocks = 16,
- .name = "MX25L8005",
- },
- {
- .idcode = 0x2015,
- .nr_blocks = 32,
- .name = "MX25L1605D",
- },
- {
- .idcode = 0x2016,
- .nr_blocks = 64,
- .name = "MX25L3205D",
- },
- {
- .idcode = 0x2017,
- .nr_blocks = 128,
- .name = "MX25L6405D",
- },
- {
- .idcode = 0x2018,
- .nr_blocks = 256,
- .name = "MX25L12805D",
- },
- {
- .idcode = 0x2618,
- .nr_blocks = 256,
- .name = "MX25L12855E",
- },
-};
-
-struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode)
-{
- const struct macronix_spi_flash_params *params;
- struct spi_flash *flash;
- unsigned int i;
- u16 id = idcode[2] | idcode[1] << 8;
-
- for (i = 0; i < ARRAY_SIZE(macronix_spi_flash_table); i++) {
- params = &macronix_spi_flash_table[i];
- if (params->idcode == id)
- break;
- }
-
- if (i == ARRAY_SIZE(macronix_spi_flash_table)) {
- debug("SF: Unsupported Macronix ID %04x\n", id);
- return NULL;
- }
-
- flash = spi_flash_alloc_base(spi, params->name);
- if (!flash) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
- }
-
- flash->page_size = 256;
- flash->sector_size = 256 * 16 * 16;
- flash->size = flash->sector_size * params->nr_blocks;
-
- /* Clear BP# bits for read-only flash */
- spi_flash_cmd_write_status(flash, 0);
-
- return flash;
-}
diff --git a/drivers/mtd/spi/ramtron.c b/drivers/mtd/spi/ramtron.c
index 38f9d69..d50da37 100644
--- a/drivers/mtd/spi/ramtron.c
+++ b/drivers/mtd/spi/ramtron.c
@@ -36,7 +36,7 @@
#include <common.h>
#include <malloc.h>
#include <spi_flash.h>
-#include "spi_flash_internal.h"
+#include "sf_internal.h"
/*
* Properties of supported FRAMs
@@ -214,7 +214,8 @@ static int ramtron_erase(struct spi_flash *flash, u32 offset, size_t len)
* nore: we are called here with idcode pointing to the first non-0x7f byte
* already!
*/
-struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode)
+static struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi,
+ u8 *idcode)
{
const struct ramtron_spi_fram_params *params;
struct ramtron_spi_fram *sn;
@@ -270,7 +271,7 @@ struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode)
return NULL;
found:
- sn = spi_flash_alloc(struct ramtron_spi_fram, spi, params->name);
+ sn = malloc(sizeof(*sn));
if (!sn) {
debug("SF: Failed to allocate memory\n");
return NULL;
@@ -285,3 +286,118 @@ found:
return &sn->flash;
}
+
+/*
+ * The following table holds all device probe functions
+ * (All flashes are removed and implemented a common probe at
+ * spi_flash_probe.c)
+ *
+ * shift: number of continuation bytes before the ID
+ * idcode: the expected IDCODE or 0xff for non JEDEC devices
+ * probe: the function to call
+ *
+ * Non JEDEC devices should be ordered in the table such that
+ * the probe functions with best detection algorithms come first.
+ *
+ * Several matching entries are permitted, they will be tried
+ * in sequence until a probe function returns non NULL.
+ *
+ * IDCODE_CONT_LEN may be redefined if a device needs to declare a
+ * larger "shift" value. IDCODE_PART_LEN generally shouldn't be
+ * changed. This is the max number of bytes probe functions may
+ * examine when looking up part-specific identification info.
+ *
+ * Probe functions will be given the idcode buffer starting at their
+ * manu id byte (the "idcode" in the table below). In other words,
+ * all of the continuation bytes will be skipped (the "shift" below).
+ */
+#define IDCODE_CONT_LEN 0
+#define IDCODE_PART_LEN 5
+static const struct {
+ const u8 shift;
+ const u8 idcode;
+ struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
+} flashes[] = {
+ /* Keep it sorted by define name */
+#ifdef CONFIG_SPI_FRAM_RAMTRON
+ { 6, 0xc2, spi_fram_probe_ramtron, },
+# undef IDCODE_CONT_LEN
+# define IDCODE_CONT_LEN 6
+#endif
+#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
+ { 0, 0xff, spi_fram_probe_ramtron, },
+#endif
+};
+#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
+
+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode)
+{
+ struct spi_slave *spi;
+ struct spi_flash *flash = NULL;
+ int ret, i, shift;
+ u8 idcode[IDCODE_LEN], *idp;
+
+ spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
+ if (!spi) {
+ printf("SF: Failed to set up slave\n");
+ return NULL;
+ }
+
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("SF: Failed to claim SPI bus: %d\n", ret);
+ goto err_claim_bus;
+ }
+
+ /* Read the ID codes */
+ ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
+ if (ret)
+ goto err_read_id;
+
+#ifdef DEBUG
+ printf("SF: Got idcodes\n");
+ print_buffer(0, idcode, 1, sizeof(idcode), 0);
+#endif
+
+ /* count the number of continuation bytes */
+ for (shift = 0, idp = idcode;
+ shift < IDCODE_CONT_LEN && *idp == 0x7f;
+ ++shift, ++idp)
+ continue;
+
+ /* search the table for matches in shift and id */
+ for (i = 0; i < ARRAY_SIZE(flashes); ++i)
+ if (flashes[i].shift == shift && flashes[i].idcode == *idp) {
+ /* we have a match, call probe */
+ flash = flashes[i].probe(spi, idp);
+ if (flash)
+ break;
+ }
+
+ if (!flash) {
+ printf("SF: Unsupported manufacturer %02x\n", *idp);
+ goto err_manufacturer_probe;
+ }
+
+ printf("SF: Detected %s with total size ", flash->name);
+ print_size(flash->size, "");
+ puts("\n");
+
+ spi_release_bus(spi);
+
+ return flash;
+
+err_manufacturer_probe:
+err_read_id:
+ spi_release_bus(spi);
+err_claim_bus:
+ spi_free_slave(spi);
+ return NULL;
+}
+
+void spi_flash_free(struct spi_flash *flash)
+{
+ spi_free_slave(flash->spi);
+ free(flash);
+}
diff --git a/drivers/mtd/spi/sf.c b/drivers/mtd/spi/sf.c
new file mode 100644
index 0000000..ddbdda0
--- /dev/null
+++ b/drivers/mtd/spi/sf.c
@@ -0,0 +1,54 @@
+/*
+ * SPI flash interface
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <spi.h>
+
+static int spi_flash_read_write(struct spi_slave *spi,
+ const u8 *cmd, size_t cmd_len,
+ const u8 *data_out, u8 *data_in,
+ size_t data_len)
+{
+ unsigned long flags = SPI_XFER_BEGIN;
+ int ret;
+
+ if (data_len == 0)
+ flags |= SPI_XFER_END;
+
+ ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
+ if (ret) {
+ debug("SF: Failed to send command (%zu bytes): %d\n",
+ cmd_len, ret);
+ } else if (data_len != 0) {
+ ret = spi_xfer(spi, data_len * 8, data_out, data_in,
+ SPI_XFER_END);
+ if (ret)
+ debug("SF: Failed to transfer %zu bytes of data: %d\n",
+ data_len, ret);
+ }
+
+ return ret;
+}
+
+int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
+ size_t cmd_len, void *data, size_t data_len)
+{
+ return spi_flash_read_write(spi, cmd, cmd_len, NULL, data, data_len);
+}
+
+int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len)
+{
+ return spi_flash_cmd_read(spi, &cmd, 1, response, len);
+}
+
+int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
+ const void *data, size_t data_len)
+{
+ return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len);
+}
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/sf_internal.h
index af1afa9..12d02f9 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -2,42 +2,43 @@
* SPI flash internal definitions
*
* Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
+ *
+ * Licensed under the GPL-2 or later.
*/
-/* Common parameters -- kind of high, but they should only occur when there
- * is a problem (and well your system already is broken), so err on the side
- * of caution in case we're dealing with slower SPI buses and/or processors.
- */
-#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
-#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
-#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
+#ifndef _SPI_FLASH_INTERNAL_H_
+#define _SPI_FLASH_INTERNAL_H_
-/* Common commands */
-#define CMD_READ_ID 0x9f
+#define SPI_FLASH_16MB_BOUN 0x1000000
-#define CMD_READ_ARRAY_SLOW 0x03
-#define CMD_READ_ARRAY_FAST 0x0b
+/* SECT flags */
+#define SECT_4K (1 << 1)
+#define SECT_32K (1 << 2)
+#define E_FSR (1 << 3)
+
+/* Erase commands */
+#define CMD_ERASE_4K 0x20
+#define CMD_ERASE_32K 0x52
+#define CMD_ERASE_CHIP 0xc7
+#define CMD_ERASE_64K 0xd8
+/* Write commands */
#define CMD_WRITE_STATUS 0x01
#define CMD_PAGE_PROGRAM 0x02
#define CMD_WRITE_DISABLE 0x04
#define CMD_READ_STATUS 0x05
-#define CMD_FLAG_STATUS 0x70
#define CMD_WRITE_ENABLE 0x06
-#define CMD_ERASE_4K 0x20
-#define CMD_ERASE_32K 0x52
-#define CMD_ERASE_64K 0xd8
-#define CMD_ERASE_CHIP 0xc7
-
-#define SPI_FLASH_16MB_BOUN 0x1000000
+#define CMD_READ_CONFIG 0x35
+#define CMD_FLAG_STATUS 0x70
-/* Manufacture ID's */
-#define SPI_FLASH_SPANSION_IDCODE0 0x01
-#define SPI_FLASH_STMICRO_IDCODE0 0x20
-#define SPI_FLASH_WINBOND_IDCODE0 0xef
+/* Read commands */
+#define CMD_READ_ARRAY_SLOW 0x03
+#define CMD_READ_ARRAY_FAST 0x0b
+#define CMD_READ_ID 0x9f
-#ifdef CONFIG_SPI_FLASH_BAR
/* Bank addr access commands */
+#ifdef CONFIG_SPI_FLASH_BAR
# define CMD_BANKADDR_BRWR 0x17
# define CMD_BANKADDR_BRRD 0x16
# define CMD_EXTNADDR_WREAR 0xC5
@@ -48,6 +49,21 @@
#define STATUS_WIP 0x01
#define STATUS_PEC 0x80
+/* Flash timeout values */
+#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
+#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
+#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
+
+/* SST specific */
+#ifdef CONFIG_SPI_FLASH_SST
+# define SST_WP 0x01 /* Supports AAI word program */
+# define CMD_SST_BP 0x02 /* Byte Program */
+# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */
+
+int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
+ const void *buf);
+#endif
+
/* Send a single-byte command to the device and read the response */
int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
@@ -58,9 +74,6 @@ int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len);
-int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
- size_t len, void *data);
-
/*
* Send a multi-byte command to the device followed by (optional)
* data. Used for programming the flash array, etc.
@@ -68,46 +81,34 @@ int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
const void *data, size_t data_len);
-/*
- * Write the requested data out breaking it up into multiple write
- * commands as needed per the write size.
- */
-int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf);
-/*
- * Enable writing on the SPI flash.
- */
+/* Flash erase(sectors) operation, support all possible erase commands */
+int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len);
+
+/* Program the status register */
+int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr);
+
+/* Set quad enbale bit */
+int spi_flash_set_qeb(struct spi_flash *flash);
+
+/* Enable writing on the SPI flash */
static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
{
return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0);
}
-/*
- * Disable writing on the SPI flash.
- */
+/* Disable writing on the SPI flash */
static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
{
return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0);
}
-/* Program the status register. */
-int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr);
-
-#ifdef CONFIG_SPI_FLASH_BAR
-/* Program the bank address register */
-int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel);
-
-/* Configure the BAR - discover the bank cmds */
-int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0);
-#endif
-
/*
- * Same as spi_flash_cmd_read() except it also claims/releases the SPI
- * bus. Used as common part of the ->read() operation.
+ * Send the read status command to the device and wait for the wip
+ * (write-in-progress) bit to clear itself.
*/
-int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len);
+int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout);
+
/*
* Used for spi_flash write operation
* - SPI claim
@@ -120,21 +121,22 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
size_t cmd_len, const void *buf, size_t buf_len);
/*
- * Send the read status command to the device and wait for the wip
- * (write-in-progress) bit to clear itself.
+ * Flash write operation, support all possible write commands.
+ * Write the requested data out breaking it up into multiple write
+ * commands as needed per the write size.
*/
-int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout);
+int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
+ size_t len, const void *buf);
+
+/*
+ * Same as spi_flash_cmd_read() except it also claims/releases the SPI
+ * bus. Used as common part of the ->read() operation.
+ */
+int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
+ size_t cmd_len, void *data, size_t data_len);
+
+/* Flash read operation, support all possible read commands */
+int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+ size_t len, void *data);
-/* Erase sectors. */
-int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len);
-
-/* Manufacturer-specific probe functions */
-struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
-struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
-struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode);
-struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode);
-struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
-struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
-struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);
-struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode);
-struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode);
+#endif /* _SPI_FLASH_INTERNAL_H_ */
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
new file mode 100644
index 0000000..2396e22
--- /dev/null
+++ b/drivers/mtd/spi/sf_ops.c
@@ -0,0 +1,405 @@
+/*
+ * SPI flash operations
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
+ * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <spi_flash.h>
+#include <watchdog.h>
+
+#include "sf_internal.h"
+
+static void spi_flash_addr(u32 addr, u8 *cmd)
+{
+ /* cmd[0] is actual command */
+ cmd[1] = addr >> 16;
+ cmd[2] = addr >> 8;
+ cmd[3] = addr >> 0;
+}
+
+int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
+{
+ u8 cmd;
+ int ret;
+
+ cmd = CMD_WRITE_STATUS;
+ ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1);
+ if (ret < 0) {
+ debug("SF: fail to write status register\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_SPI_FLASH_BAR
+static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
+{
+ u8 cmd;
+ int ret;
+
+ if (flash->bank_curr == bank_sel) {
+ debug("SF: not require to enable bank%d\n", bank_sel);
+ return 0;
+ }
+
+ cmd = flash->bank_write_cmd;
+ ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
+ if (ret < 0) {
+ debug("SF: fail to write bank register\n");
+ return ret;
+ }
+ flash->bank_curr = bank_sel;
+
+ return 0;
+}
+#endif
+
+int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
+{
+ struct spi_slave *spi = flash->spi;
+ unsigned long timebase;
+ int ret;
+ u8 status;
+ u8 check_status = 0x0;
+ u8 poll_bit = STATUS_WIP;
+ u8 cmd = flash->poll_cmd;
+
+ if (cmd == CMD_FLAG_STATUS) {
+ poll_bit = STATUS_PEC;
+ check_status = poll_bit;
+ }
+
+ ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
+ if (ret) {
+ debug("SF: fail to read %s status register\n",
+ cmd == CMD_READ_STATUS ? "read" : "flag");
+ return ret;
+ }
+
+ timebase = get_timer(0);
+ do {
+ WATCHDOG_RESET();
+
+ ret = spi_xfer(spi, 8, NULL, &status, 0);
+ if (ret)
+ return -1;
+
+ if ((status & poll_bit) == check_status)
+ break;
+
+ } while (get_timer(timebase) < timeout);
+
+ spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
+
+ if ((status & poll_bit) == check_status)
+ return 0;
+
+ /* Timed out */
+ debug("SF: time out!\n");
+ return -1;
+}
+
+int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
+ size_t cmd_len, const void *buf, size_t buf_len)
+{
+ struct spi_slave *spi = flash->spi;
+ unsigned long timeout = SPI_FLASH_PROG_TIMEOUT;
+ int ret;
+
+ if (buf == NULL)
+ timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT;
+
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: unable to claim SPI bus\n");
+ return ret;
+ }
+
+ ret = spi_flash_cmd_write_enable(flash);
+ if (ret < 0) {
+ debug("SF: enabling write failed\n");
+ return ret;
+ }
+
+ ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len);
+ if (ret < 0) {
+ debug("SF: write cmd failed\n");
+ return ret;
+ }
+
+ ret = spi_flash_cmd_wait_ready(flash, timeout);
+ if (ret < 0) {
+ debug("SF: write %s timed out\n",
+ timeout == SPI_FLASH_PROG_TIMEOUT ?
+ "program" : "page erase");
+ return ret;
+ }
+
+ spi_release_bus(spi);
+
+ return ret;
+}
+
+int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
+{
+ u32 erase_size;
+ u8 cmd[4];
+ int ret = -1;
+
+ erase_size = flash->erase_size;
+ if (offset % erase_size || len % erase_size) {
+ debug("SF: Erase offset/length not multiple of erase size\n");
+ return -1;
+ }
+
+ cmd[0] = flash->erase_cmd;
+ while (len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+ u8 bank_sel;
+
+ bank_sel = offset / SPI_FLASH_16MB_BOUN;
+
+ ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
+ if (ret) {
+ debug("SF: fail to set bank%d\n", bank_sel);
+ return ret;
+ }
+#endif
+ spi_flash_addr(offset, cmd);
+
+ debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
+ cmd[2], cmd[3], offset);
+
+ ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
+ if (ret < 0) {
+ debug("SF: erase failed\n");
+ break;
+ }
+
+ offset += erase_size;
+ len -= erase_size;
+ }
+
+ return ret;
+}
+
+int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
+ size_t len, const void *buf)
+{
+ unsigned long byte_addr, page_size;
+ size_t chunk_len, actual;
+ u8 cmd[4];
+ int ret = -1;
+
+ page_size = flash->page_size;
+
+ cmd[0] = CMD_PAGE_PROGRAM;
+ for (actual = 0; actual < len; actual += chunk_len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+ u8 bank_sel;
+
+ bank_sel = offset / SPI_FLASH_16MB_BOUN;
+
+ ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
+ if (ret) {
+ debug("SF: fail to set bank%d\n", bank_sel);
+ return ret;
+ }
+#endif
+ byte_addr = offset % page_size;
+ chunk_len = min(len - actual, page_size - byte_addr);
+
+ if (flash->spi->max_write_size)
+ chunk_len = min(chunk_len, flash->spi->max_write_size);
+
+ spi_flash_addr(offset, cmd);
+
+ debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
+ buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
+
+ ret = spi_flash_write_common(flash, cmd, sizeof(cmd),
+ buf + actual, chunk_len);
+ if (ret < 0) {
+ debug("SF: write failed\n");
+ break;
+ }
+
+ offset += chunk_len;
+ }
+
+ return ret;
+}
+
+int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
+ size_t cmd_len, void *data, size_t data_len)
+{
+ struct spi_slave *spi = flash->spi;
+ int ret;
+
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: unable to claim SPI bus\n");
+ return ret;
+ }
+
+ ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
+ if (ret < 0) {
+ debug("SF: read cmd failed\n");
+ return ret;
+ }
+
+ spi_release_bus(spi);
+
+ return ret;
+}
+
+int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+ size_t len, void *data)
+{
+ u8 cmd[5], bank_sel = 0;
+ u32 remain_len, read_len;
+ int ret = -1;
+
+ /* Handle memory-mapped SPI */
+ if (flash->memory_map) {
+ spi_xfer(flash->spi, 0, NULL, NULL, SPI_XFER_MMAP);
+ memcpy(data, flash->memory_map + offset, len);
+ spi_xfer(flash->spi, 0, NULL, NULL, SPI_XFER_MMAP_END);
+ return 0;
+ }
+
+ cmd[0] = CMD_READ_ARRAY_FAST;
+ cmd[4] = 0x00;
+
+ while (len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+ bank_sel = offset / SPI_FLASH_16MB_BOUN;
+
+ ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
+ if (ret) {
+ debug("SF: fail to set bank%d\n", bank_sel);
+ return ret;
+ }
+#endif
+ remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset);
+ if (len < remain_len)
+ read_len = len;
+ else
+ read_len = remain_len;
+
+ spi_flash_addr(offset, cmd);
+
+ ret = spi_flash_read_common(flash, cmd, sizeof(cmd),
+ data, read_len);
+ if (ret < 0) {
+ debug("SF: read failed\n");
+ break;
+ }
+
+ offset += read_len;
+ len -= read_len;
+ data += read_len;
+ }
+
+ return ret;
+}
+
+#ifdef CONFIG_SPI_FLASH_SST
+static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf)
+{
+ int ret;
+ u8 cmd[4] = {
+ CMD_SST_BP,
+ offset >> 16,
+ offset >> 8,
+ offset,
+ };
+
+ debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
+ spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset);
+
+ ret = spi_flash_cmd_write_enable(flash);
+ if (ret)
+ return ret;
+
+ ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1);
+ if (ret)
+ return ret;
+
+ return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+}
+
+int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
+ const void *buf)
+{
+ size_t actual, cmd_len;
+ int ret;
+ u8 cmd[4];
+
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: Unable to claim SPI bus\n");
+ return ret;
+ }
+
+ /* If the data is not word aligned, write out leading single byte */
+ actual = offset % 2;
+ if (actual) {
+ ret = sst_byte_write(flash, offset, buf);
+ if (ret)
+ goto done;
+ }
+ offset += actual;
+
+ ret = spi_flash_cmd_write_enable(flash);
+ if (ret)
+ goto done;
+
+ cmd_len = 4;
+ cmd[0] = CMD_SST_AAI_WP;
+ cmd[1] = offset >> 16;
+ cmd[2] = offset >> 8;
+ cmd[3] = offset;
+
+ for (; actual < len - 1; actual += 2) {
+ debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
+ spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual,
+ cmd[0], offset);
+
+ ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len,
+ buf + actual, 2);
+ if (ret) {
+ debug("SF: sst word program failed\n");
+ break;
+ }
+
+ ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+ if (ret)
+ break;
+
+ cmd_len = 1;
+ offset += 2;
+ }
+
+ if (!ret)
+ ret = spi_flash_cmd_write_disable(flash);
+
+ /* If there is a single trailing byte, write it out */
+ if (!ret && actual != len)
+ ret = sst_byte_write(flash, offset, buf + actual);
+
+ done:
+ debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
+ ret ? "failure" : "success", len, offset - actual);
+
+ spi_release_bus(flash->spi);
+ return ret;
+}
+#endif
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
new file mode 100644
index 0000000..4251b1b
--- /dev/null
+++ b/drivers/mtd/spi/sf_probe.c
@@ -0,0 +1,363 @@
+/*
+ * SPI flash probing
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
+ * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <spi.h>
+#include <spi_flash.h>
+
+#include "sf_internal.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * struct spi_flash_params - SPI/QSPI flash device params structure
+ *
+ * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
+ * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
+ * @ext_jedec: Device ext_jedec ID
+ * @sector_size: Sector size of this device
+ * @nr_sectors: No.of sectors on this device
+ * @flags: Importent param, for flash specific behaviour
+ */
+struct spi_flash_params {
+ const char *name;
+ u32 jedec;
+ u16 ext_jedec;
+ u32 sector_size;
+ u32 nr_sectors;
+ u16 flags;
+};
+
+static const struct spi_flash_params spi_flash_params_table[] = {
+#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */
+ {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, SECT_4K},
+ {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, SECT_4K},
+ {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, SECT_4K},
+ {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, SECT_4K},
+ {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, SECT_4K},
+ {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, SECT_4K},
+ {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, SECT_4K},
+#endif
+#ifdef CONFIG_SPI_FLASH_EON /* EON */
+ {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0},
+ {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, SECT_4K},
+ {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0},
+ {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, 0},
+#endif
+#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */
+ {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, SECT_4K},
+ {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, SECT_4K},
+#endif
+#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
+ {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0},
+ {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0},
+ {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0},
+ {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0},
+ {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0},
+ {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, 0},
+ {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, 0},
+ {"MX25L51235F", 0xc2201A, 0x0, 64 * 1024, 1024, 0},
+ {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, 0},
+#endif
+#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
+ {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0},
+ {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0},
+ {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0},
+ {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0},
+ {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, 0},
+ {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, 0},
+ {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, 0},
+ {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, 0},
+ {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, 0},
+ {"S25FL256S_256K", 0x010219, 0x4d00, 64 * 1024, 512, 0},
+ {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, 0},
+ {"S25FL512S_256K", 0x010220, 0x4d00, 64 * 1024, 1024, 0},
+ {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, 0},
+#endif
+#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
+ {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0},
+ {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0},
+ {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0},
+ {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0},
+ {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0},
+ {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0},
+ {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0},
+ {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0},
+ {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, SECT_4K},
+ {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, SECT_4K},
+ {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, SECT_4K},
+ {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, SECT_4K},
+ {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, SECT_4K},
+ {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, SECT_4K},
+ {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, SECT_4K},
+ {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, SECT_4K},
+ {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, E_FSR | SECT_4K},
+ {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, E_FSR | SECT_4K},
+ {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, E_FSR | SECT_4K},
+ {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, E_FSR | SECT_4K},
+#endif
+#ifdef CONFIG_SPI_FLASH_SST /* SST */
+ {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, SECT_4K | SST_WP},
+ {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, SECT_4K | SST_WP},
+ {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, SECT_4K | SST_WP},
+ {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, SECT_4K | SST_WP},
+ {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, SECT_4K},
+ {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, SECT_4K | SST_WP},
+ {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, SECT_4K | SST_WP},
+ {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, SECT_4K | SST_WP},
+ {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, SECT_4K | SST_WP},
+ {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, SECT_4K | SST_WP},
+#endif
+#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */
+ {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0},
+ {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0},
+ {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0},
+ {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, SECT_4K},
+ {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, SECT_4K},
+ {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, SECT_4K},
+ {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, SECT_4K},
+ {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, SECT_4K},
+ {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, SECT_4K},
+ {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, SECT_4K},
+ {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, SECT_4K},
+ {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, SECT_4K},
+ {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, SECT_4K},
+ {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, SECT_4K},
+ {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, SECT_4K},
+ {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, SECT_4K},
+ {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, SECT_4K},
+ {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, SECT_4K},
+#endif
+ /*
+ * Note:
+ * Below paired flash devices has similar spi_flash_params params.
+ * (S25FL129P_64K, S25FL128S_64K)
+ * (W25Q80BL, W25Q80BV)
+ * (W25Q16CL, W25Q16DV)
+ * (W25Q32BV, W25Q32FV_SPI)
+ * (W25Q64CV, W25Q64FV_SPI)
+ * (W25Q128BV, W25Q128FV_SPI)
+ * (W25Q32DW, W25Q32FV_QPI)
+ * (W25Q64DW, W25Q64FV_QPI)
+ * (W25Q128FW, W25Q128FV_QPI)
+ */
+};
+
+static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
+ u8 *idcode)
+{
+ const struct spi_flash_params *params;
+ struct spi_flash *flash;
+ int i;
+ u16 jedec = idcode[1] << 8 | idcode[2];
+ u16 ext_jedec = idcode[3] << 8 | idcode[4];
+
+ /* Get the flash id (jedec = manuf_id + dev_id, ext_jedec) */
+ for (i = 0; i < ARRAY_SIZE(spi_flash_params_table); i++) {
+ params = &spi_flash_params_table[i];
+ if ((params->jedec >> 16) == idcode[0]) {
+ if ((params->jedec & 0xFFFF) == jedec) {
+ if (params->ext_jedec == 0)
+ break;
+ else if (params->ext_jedec == ext_jedec)
+ break;
+ }
+ }
+ }
+
+ if (i == ARRAY_SIZE(spi_flash_params_table)) {
+ printf("SF: Unsupported flash IDs: ");
+ printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
+ idcode[0], jedec, ext_jedec);
+ return NULL;
+ }
+
+ flash = malloc(sizeof(*flash));
+ if (!flash) {
+ debug("SF: Failed to allocate spi_flash\n");
+ return NULL;
+ }
+ memset(flash, '\0', sizeof(*flash));
+
+ flash->spi = spi;
+ flash->name = params->name;
+ flash->memory_map = spi->memory_map;
+
+ /* Assign spi_flash ops */
+ flash->write = spi_flash_cmd_write_ops;
+#ifdef CONFIG_SPI_FLASH_SST
+ if (params->flags & SST_WP)
+ flash->write = sst_write_wp;
+#endif
+ flash->erase = spi_flash_cmd_erase_ops;
+ flash->read = spi_flash_cmd_read_ops;
+
+ /* Compute the flash size */
+ flash->page_size = (ext_jedec == 0x4d00) ? 512 : 256;
+ flash->sector_size = params->sector_size;
+ flash->size = flash->sector_size * params->nr_sectors;
+
+ /* Compute erase sector and command */
+ if (params->flags & SECT_4K) {
+ flash->erase_cmd = CMD_ERASE_4K;
+ flash->erase_size = 4096;
+ } else if (params->flags & SECT_32K) {
+ flash->erase_cmd = CMD_ERASE_32K;
+ flash->erase_size = 32768;
+ } else {
+ flash->erase_cmd = CMD_ERASE_64K;
+ flash->erase_size = flash->sector_size;
+ }
+
+ /* Poll cmd seclection */
+ flash->poll_cmd = CMD_READ_STATUS;
+#ifdef CONFIG_SPI_FLASH_STMICRO
+ if (params->flags & E_FSR)
+ flash->poll_cmd = CMD_FLAG_STATUS;
+#endif
+
+ /* Configure the BAR - discover bank cmds and read current bank */
+#ifdef CONFIG_SPI_FLASH_BAR
+ u8 curr_bank = 0;
+ if (flash->size > SPI_FLASH_16MB_BOUN) {
+ flash->bank_read_cmd = (idcode[0] == 0x01) ?
+ CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR;
+ flash->bank_write_cmd = (idcode[0] == 0x01) ?
+ CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR;
+
+ if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
+ &curr_bank, 1)) {
+ debug("SF: fail to read bank addr register\n");
+ return NULL;
+ }
+ flash->bank_curr = curr_bank;
+ } else {
+ flash->bank_curr = curr_bank;
+ }
+#endif
+
+ /* Flash powers up read-only, so clear BP# bits */
+#if defined(CONFIG_SPI_FLASH_ATMEL) || \
+ defined(CONFIG_SPI_FLASH_MACRONIX) || \
+ defined(CONFIG_SPI_FLASH_SST)
+ spi_flash_cmd_write_status(flash, 0);
+#endif
+
+ return flash;
+}
+
+#ifdef CONFIG_OF_CONTROL
+int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
+{
+ fdt_addr_t addr;
+ fdt_size_t size;
+ int node;
+
+ /* If there is no node, do nothing */
+ node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
+ if (node < 0)
+ return 0;
+
+ addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("%s: Cannot decode address\n", __func__);
+ return 0;
+ }
+
+ if (flash->size != size) {
+ debug("%s: Memory map must cover entire device\n", __func__);
+ return -1;
+ }
+ flash->memory_map = (void *)addr;
+
+ return 0;
+}
+#endif /* CONFIG_OF_CONTROL */
+
+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode)
+{
+ struct spi_slave *spi;
+ struct spi_flash *flash = NULL;
+ u8 idcode[5];
+ int ret;
+
+ /* Setup spi_slave */
+ spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
+ if (!spi) {
+ printf("SF: Failed to set up slave\n");
+ return NULL;
+ }
+
+ /* Claim spi bus */
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("SF: Failed to claim SPI bus: %d\n", ret);
+ goto err_claim_bus;
+ }
+
+ /* Read the ID codes */
+ ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
+ if (ret) {
+ printf("SF: Failed to get idcodes\n");
+ goto err_read_id;
+ }
+
+#ifdef DEBUG
+ printf("SF: Got idcodes\n");
+ print_buffer(0, idcode, 1, sizeof(idcode), 0);
+#endif
+
+ /* Validate params from spi_flash_params table */
+ flash = spi_flash_validate_params(spi, idcode);
+ if (!flash)
+ goto err_read_id;
+
+#ifdef CONFIG_OF_CONTROL
+ if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
+ debug("SF: FDT decode error\n");
+ goto err_read_id;
+ }
+#endif
+#ifndef CONFIG_SPL_BUILD
+ printf("SF: Detected %s with page size ", flash->name);
+ print_size(flash->page_size, ", erase size ");
+ print_size(flash->erase_size, ", total ");
+ print_size(flash->size, "");
+ if (flash->memory_map)
+ printf(", mapped at %p", flash->memory_map);
+ puts("\n");
+#endif
+#ifndef CONFIG_SPI_FLASH_BAR
+ if (flash->size > SPI_FLASH_16MB_BOUN) {
+ puts("SF: Warning - Only lower 16MiB accessible,");
+ puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
+ }
+#endif
+
+ /* Release spi bus */
+ spi_release_bus(spi);
+
+ return flash;
+
+err_read_id:
+ spi_release_bus(spi);
+err_claim_bus:
+ spi_free_slave(spi);
+ return NULL;
+}
+
+void spi_flash_free(struct spi_flash *flash)
+{
+ spi_free_slave(flash->spi);
+ free(flash);
+}
diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c
deleted file mode 100644
index fa7ac8c..0000000
--- a/drivers/mtd/spi/spansion.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright (C) 2009 Freescale Semiconductor, Inc.
- *
- * Author: Mingkai Hu (Mingkai.hu@freescale.com)
- * Based on stmicro.c by Wolfgang Denk (wd@denx.de),
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com),
- * and Jason McMullan (mcmullan@netapp.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi_flash.h>
-
-#include "spi_flash_internal.h"
-
-struct spansion_spi_flash_params {
- u16 idcode1;
- u16 idcode2;
- u16 pages_per_sector;
- u16 nr_sectors;
- const char *name;
-};
-
-static const struct spansion_spi_flash_params spansion_spi_flash_table[] = {
- {
- .idcode1 = 0x0213,
- .idcode2 = 0,
- .pages_per_sector = 256,
- .nr_sectors = 16,
- .name = "S25FL008A",
- },
- {
- .idcode1 = 0x0214,
- .idcode2 = 0,
- .pages_per_sector = 256,
- .nr_sectors = 32,
- .name = "S25FL016A",
- },
- {
- .idcode1 = 0x0215,
- .idcode2 = 0,
- .pages_per_sector = 256,
- .nr_sectors = 64,
- .name = "S25FL032A",
- },
- {
- .idcode1 = 0x0216,
- .idcode2 = 0,
- .pages_per_sector = 256,
- .nr_sectors = 128,
- .name = "S25FL064A",
- },
- {
- .idcode1 = 0x2018,
- .idcode2 = 0x0301,
- .pages_per_sector = 256,
- .nr_sectors = 256,
- .name = "S25FL128P_64K",
- },
- {
- .idcode1 = 0x2018,
- .idcode2 = 0x0300,
- .pages_per_sector = 1024,
- .nr_sectors = 64,
- .name = "S25FL128P_256K",
- },
- {
- .idcode1 = 0x0215,
- .idcode2 = 0x4d00,
- .pages_per_sector = 256,
- .nr_sectors = 64,
- .name = "S25FL032P",
- },
- {
- .idcode1 = 0x0216,
- .idcode2 = 0x4d00,
- .pages_per_sector = 256,
- .nr_sectors = 128,
- .name = "S25FL064P",
- },
- {
- .idcode1 = 0x2018,
- .idcode2 = 0x4d01,
- .pages_per_sector = 256,
- .nr_sectors = 256,
- .name = "S25FL129P_64K/S25FL128S_64K",
- },
- {
- .idcode1 = 0x0219,
- .idcode2 = 0x4d01,
- .pages_per_sector = 256,
- .nr_sectors = 512,
- .name = "S25FL256S_64K",
- },
- {
- .idcode1 = 0x0220,
- .idcode2 = 0x4d01,
- .pages_per_sector = 256,
- .nr_sectors = 1024,
- .name = "S25FL512S_64K",
- },
-};
-
-struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode)
-{
- const struct spansion_spi_flash_params *params;
- struct spi_flash *flash;
- unsigned int i;
- unsigned short jedec, ext_jedec;
-
- jedec = idcode[1] << 8 | idcode[2];
- ext_jedec = idcode[3] << 8 | idcode[4];
-
- for (i = 0; i < ARRAY_SIZE(spansion_spi_flash_table); i++) {
- params = &spansion_spi_flash_table[i];
- if (params->idcode1 == jedec) {
- if (params->idcode2 == ext_jedec)
- break;
- }
- }
-
- if (i == ARRAY_SIZE(spansion_spi_flash_table)) {
- debug("SF: Unsupported SPANSION ID %04x %04x\n",
- jedec, ext_jedec);
- return NULL;
- }
-
- flash = spi_flash_alloc_base(spi, params->name);
- if (!flash) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
- }
-
- flash->page_size = 256;
- flash->sector_size = 256 * params->pages_per_sector;
- flash->size = flash->sector_size * params->nr_sectors;
-
- return flash;
-}
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
deleted file mode 100644
index 5d5055f..0000000
--- a/drivers/mtd/spi/spi_flash.c
+++ /dev/null
@@ -1,615 +0,0 @@
-/*
- * SPI flash interface
- *
- * Copyright (C) 2008 Atmel Corporation
- * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <fdtdec.h>
-#include <malloc.h>
-#include <spi.h>
-#include <spi_flash.h>
-#include <watchdog.h>
-
-#include "spi_flash_internal.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void spi_flash_addr(u32 addr, u8 *cmd)
-{
- /* cmd[0] is actual command */
- cmd[1] = addr >> 16;
- cmd[2] = addr >> 8;
- cmd[3] = addr >> 0;
-}
-
-static int spi_flash_read_write(struct spi_slave *spi,
- const u8 *cmd, size_t cmd_len,
- const u8 *data_out, u8 *data_in,
- size_t data_len)
-{
- unsigned long flags = SPI_XFER_BEGIN;
- int ret;
-
- if (data_len == 0)
- flags |= SPI_XFER_END;
-
- ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
- if (ret) {
- debug("SF: Failed to send command (%zu bytes): %d\n",
- cmd_len, ret);
- } else if (data_len != 0) {
- ret = spi_xfer(spi, data_len * 8, data_out, data_in,
- SPI_XFER_END);
- if (ret)
- debug("SF: Failed to transfer %zu bytes of data: %d\n",
- data_len, ret);
- }
-
- return ret;
-}
-
-int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len)
-{
- return spi_flash_cmd_read(spi, &cmd, 1, response, len);
-}
-
-int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len)
-{
- return spi_flash_read_write(spi, cmd, cmd_len, NULL, data, data_len);
-}
-
-int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
- const void *data, size_t data_len)
-{
- return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len);
-}
-
-int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
-{
- struct spi_slave *spi = flash->spi;
- unsigned long timebase;
- int ret;
- u8 status;
- u8 check_status = 0x0;
- u8 poll_bit = STATUS_WIP;
- u8 cmd = flash->poll_cmd;
-
- if (cmd == CMD_FLAG_STATUS) {
- poll_bit = STATUS_PEC;
- check_status = poll_bit;
- }
-
- ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
- if (ret) {
- debug("SF: fail to read %s status register\n",
- cmd == CMD_READ_STATUS ? "read" : "flag");
- return ret;
- }
-
- timebase = get_timer(0);
- do {
- WATCHDOG_RESET();
-
- ret = spi_xfer(spi, 8, NULL, &status, 0);
- if (ret)
- return -1;
-
- if ((status & poll_bit) == check_status)
- break;
-
- } while (get_timer(timebase) < timeout);
-
- spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
-
- if ((status & poll_bit) == check_status)
- return 0;
-
- /* Timed out */
- debug("SF: time out!\n");
- return -1;
-}
-
-int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
- size_t cmd_len, const void *buf, size_t buf_len)
-{
- struct spi_slave *spi = flash->spi;
- unsigned long timeout = SPI_FLASH_PROG_TIMEOUT;
- int ret;
-
- if (buf == NULL)
- timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT;
-
- ret = spi_claim_bus(flash->spi);
- if (ret) {
- debug("SF: unable to claim SPI bus\n");
- return ret;
- }
-
- ret = spi_flash_cmd_write_enable(flash);
- if (ret < 0) {
- debug("SF: enabling write failed\n");
- return ret;
- }
-
- ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len);
- if (ret < 0) {
- debug("SF: write cmd failed\n");
- return ret;
- }
-
- ret = spi_flash_cmd_wait_ready(flash, timeout);
- if (ret < 0) {
- debug("SF: write %s timed out\n",
- timeout == SPI_FLASH_PROG_TIMEOUT ?
- "program" : "page erase");
- return ret;
- }
-
- spi_release_bus(spi);
-
- return ret;
-}
-
-int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
-{
- u32 erase_size;
- u8 cmd[4];
- int ret = -1;
-
- erase_size = flash->sector_size;
- if (offset % erase_size || len % erase_size) {
- debug("SF: Erase offset/length not multiple of erase size\n");
- return -1;
- }
-
- if (erase_size == 4096)
- cmd[0] = CMD_ERASE_4K;
- else
- cmd[0] = CMD_ERASE_64K;
-
- while (len) {
-#ifdef CONFIG_SPI_FLASH_BAR
- u8 bank_sel;
-
- bank_sel = offset / SPI_FLASH_16MB_BOUN;
-
- ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
- if (ret) {
- debug("SF: fail to set bank%d\n", bank_sel);
- return ret;
- }
-#endif
- spi_flash_addr(offset, cmd);
-
- debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
- cmd[2], cmd[3], offset);
-
- ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
- if (ret < 0) {
- debug("SF: erase failed\n");
- break;
- }
-
- offset += erase_size;
- len -= erase_size;
- }
-
- return ret;
-}
-
-int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf)
-{
- unsigned long byte_addr, page_size;
- size_t chunk_len, actual;
- u8 cmd[4];
- int ret = -1;
-
- page_size = flash->page_size;
-
- cmd[0] = CMD_PAGE_PROGRAM;
- for (actual = 0; actual < len; actual += chunk_len) {
-#ifdef CONFIG_SPI_FLASH_BAR
- u8 bank_sel;
-
- bank_sel = offset / SPI_FLASH_16MB_BOUN;
-
- ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
- if (ret) {
- debug("SF: fail to set bank%d\n", bank_sel);
- return ret;
- }
-#endif
- byte_addr = offset % page_size;
- chunk_len = min(len - actual, page_size - byte_addr);
-
- if (flash->spi->max_write_size)
- chunk_len = min(chunk_len, flash->spi->max_write_size);
-
- spi_flash_addr(offset, cmd);
-
- debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
- buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
-
- ret = spi_flash_write_common(flash, cmd, sizeof(cmd),
- buf + actual, chunk_len);
- if (ret < 0) {
- debug("SF: write failed\n");
- break;
- }
-
- offset += chunk_len;
- }
-
- return ret;
-}
-
-int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
- size_t cmd_len, void *data, size_t data_len)
-{
- struct spi_slave *spi = flash->spi;
- int ret;
-
- ret = spi_claim_bus(flash->spi);
- if (ret) {
- debug("SF: unable to claim SPI bus\n");
- return ret;
- }
-
- ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
- if (ret < 0) {
- debug("SF: read cmd failed\n");
- return ret;
- }
-
- spi_release_bus(spi);
-
- return ret;
-}
-
-int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
- size_t len, void *data)
-{
- u8 cmd[5], bank_sel = 0;
- u32 remain_len, read_len;
- int ret = -1;
-
- /* Handle memory-mapped SPI */
- if (flash->memory_map) {
- memcpy(data, flash->memory_map + offset, len);
- return 0;
- }
-
- cmd[0] = CMD_READ_ARRAY_FAST;
- cmd[4] = 0x00;
-
- while (len) {
-#ifdef CONFIG_SPI_FLASH_BAR
- bank_sel = offset / SPI_FLASH_16MB_BOUN;
-
- ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
- if (ret) {
- debug("SF: fail to set bank%d\n", bank_sel);
- return ret;
- }
-#endif
- remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset);
- if (len < remain_len)
- read_len = len;
- else
- read_len = remain_len;
-
- spi_flash_addr(offset, cmd);
-
- ret = spi_flash_read_common(flash, cmd, sizeof(cmd),
- data, read_len);
- if (ret < 0) {
- debug("SF: read failed\n");
- break;
- }
-
- offset += read_len;
- len -= read_len;
- data += read_len;
- }
-
- return ret;
-}
-
-int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
-{
- u8 cmd;
- int ret;
-
- cmd = CMD_WRITE_STATUS;
- ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1);
- if (ret < 0) {
- debug("SF: fail to write status register\n");
- return ret;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_SPI_FLASH_BAR
-int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
-{
- u8 cmd;
- int ret;
-
- if (flash->bank_curr == bank_sel) {
- debug("SF: not require to enable bank%d\n", bank_sel);
- return 0;
- }
-
- cmd = flash->bank_write_cmd;
- ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
- if (ret < 0) {
- debug("SF: fail to write bank register\n");
- return ret;
- }
- flash->bank_curr = bank_sel;
-
- return 0;
-}
-
-int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0)
-{
- u8 cmd;
- u8 curr_bank = 0;
-
- /* discover bank cmds */
- switch (idcode0) {
- case SPI_FLASH_SPANSION_IDCODE0:
- flash->bank_read_cmd = CMD_BANKADDR_BRRD;
- flash->bank_write_cmd = CMD_BANKADDR_BRWR;
- break;
- case SPI_FLASH_STMICRO_IDCODE0:
- case SPI_FLASH_WINBOND_IDCODE0:
- flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
- flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
- break;
- default:
- printf("SF: Unsupported bank commands %02x\n", idcode0);
- return -1;
- }
-
- /* read the bank reg - on which bank the flash is in currently */
- cmd = flash->bank_read_cmd;
- if (flash->size > SPI_FLASH_16MB_BOUN) {
- if (spi_flash_read_common(flash, &cmd, 1, &curr_bank, 1)) {
- debug("SF: fail to read bank addr register\n");
- return -1;
- }
- flash->bank_curr = curr_bank;
- } else {
- flash->bank_curr = curr_bank;
- }
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_OF_CONTROL
-int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
-{
- fdt_addr_t addr;
- fdt_size_t size;
- int node;
-
- /* If there is no node, do nothing */
- node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
- if (node < 0)
- return 0;
-
- addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
- if (addr == FDT_ADDR_T_NONE) {
- debug("%s: Cannot decode address\n", __func__);
- return 0;
- }
-
- if (flash->size != size) {
- debug("%s: Memory map must cover entire device\n", __func__);
- return -1;
- }
- flash->memory_map = (void *)addr;
-
- return 0;
-}
-#endif /* CONFIG_OF_CONTROL */
-
-/*
- * The following table holds all device probe functions
- *
- * shift: number of continuation bytes before the ID
- * idcode: the expected IDCODE or 0xff for non JEDEC devices
- * probe: the function to call
- *
- * Non JEDEC devices should be ordered in the table such that
- * the probe functions with best detection algorithms come first.
- *
- * Several matching entries are permitted, they will be tried
- * in sequence until a probe function returns non NULL.
- *
- * IDCODE_CONT_LEN may be redefined if a device needs to declare a
- * larger "shift" value. IDCODE_PART_LEN generally shouldn't be
- * changed. This is the max number of bytes probe functions may
- * examine when looking up part-specific identification info.
- *
- * Probe functions will be given the idcode buffer starting at their
- * manu id byte (the "idcode" in the table below). In other words,
- * all of the continuation bytes will be skipped (the "shift" below).
- */
-#define IDCODE_CONT_LEN 0
-#define IDCODE_PART_LEN 5
-static const struct {
- const u8 shift;
- const u8 idcode;
- struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
-} flashes[] = {
- /* Keep it sorted by define name */
-#ifdef CONFIG_SPI_FLASH_ATMEL
- { 0, 0x1f, spi_flash_probe_atmel, },
-#endif
-#ifdef CONFIG_SPI_FLASH_EON
- { 0, 0x1c, spi_flash_probe_eon, },
-#endif
-#ifdef CONFIG_SPI_FLASH_GIGADEVICE
- { 0, 0xc8, spi_flash_probe_gigadevice, },
-#endif
-#ifdef CONFIG_SPI_FLASH_MACRONIX
- { 0, 0xc2, spi_flash_probe_macronix, },
-#endif
-#ifdef CONFIG_SPI_FLASH_SPANSION
- { 0, 0x01, spi_flash_probe_spansion, },
-#endif
-#ifdef CONFIG_SPI_FLASH_SST
- { 0, 0xbf, spi_flash_probe_sst, },
-#endif
-#ifdef CONFIG_SPI_FLASH_STMICRO
- { 0, 0x20, spi_flash_probe_stmicro, },
-#endif
-#ifdef CONFIG_SPI_FLASH_WINBOND
- { 0, 0xef, spi_flash_probe_winbond, },
-#endif
-#ifdef CONFIG_SPI_FRAM_RAMTRON
- { 6, 0xc2, spi_fram_probe_ramtron, },
-# undef IDCODE_CONT_LEN
-# define IDCODE_CONT_LEN 6
-#endif
- /* Keep it sorted by best detection */
-#ifdef CONFIG_SPI_FLASH_STMICRO
- { 0, 0xff, spi_flash_probe_stmicro, },
-#endif
-#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
- { 0, 0xff, spi_fram_probe_ramtron, },
-#endif
-};
-#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
-
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode)
-{
- struct spi_slave *spi;
- struct spi_flash *flash = NULL;
- int ret, i, shift;
- u8 idcode[IDCODE_LEN], *idp;
-
- spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
- if (!spi) {
- printf("SF: Failed to set up slave\n");
- return NULL;
- }
-
- ret = spi_claim_bus(spi);
- if (ret) {
- debug("SF: Failed to claim SPI bus: %d\n", ret);
- goto err_claim_bus;
- }
-
- /* Read the ID codes */
- ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
- if (ret)
- goto err_read_id;
-
-#ifdef DEBUG
- printf("SF: Got idcodes\n");
- print_buffer(0, idcode, 1, sizeof(idcode), 0);
-#endif
-
- /* count the number of continuation bytes */
- for (shift = 0, idp = idcode;
- shift < IDCODE_CONT_LEN && *idp == 0x7f;
- ++shift, ++idp)
- continue;
-
- /* search the table for matches in shift and id */
- for (i = 0; i < ARRAY_SIZE(flashes); ++i)
- if (flashes[i].shift == shift && flashes[i].idcode == *idp) {
- /* we have a match, call probe */
- flash = flashes[i].probe(spi, idp);
- if (flash)
- break;
- }
-
- if (!flash) {
- printf("SF: Unsupported manufacturer %02x\n", *idp);
- goto err_manufacturer_probe;
- }
-
-#ifdef CONFIG_SPI_FLASH_BAR
- /* Configure the BAR - disover bank cmds and read current bank */
- ret = spi_flash_bank_config(flash, *idp);
- if (ret < 0)
- goto err_manufacturer_probe;
-#endif
-
-#ifdef CONFIG_OF_CONTROL
- if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
- debug("SF: FDT decode error\n");
- goto err_manufacturer_probe;
- }
-#endif
-#ifndef CONFIG_SPL_BUILD
- printf("SF: Detected %s with page size ", flash->name);
- print_size(flash->sector_size, ", total ");
- print_size(flash->size, "");
- if (flash->memory_map)
- printf(", mapped at %p", flash->memory_map);
- puts("\n");
-#endif
-#ifndef CONFIG_SPI_FLASH_BAR
- if (flash->size > SPI_FLASH_16MB_BOUN) {
- puts("SF: Warning - Only lower 16MiB accessible,");
- puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
- }
-#endif
-
- spi_release_bus(spi);
-
- return flash;
-
-err_manufacturer_probe:
-err_read_id:
- spi_release_bus(spi);
-err_claim_bus:
- spi_free_slave(spi);
- return NULL;
-}
-
-void *spi_flash_do_alloc(int offset, int size, struct spi_slave *spi,
- const char *name)
-{
- struct spi_flash *flash;
- void *ptr;
-
- ptr = malloc(size);
- if (!ptr) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
- }
- memset(ptr, '\0', size);
- flash = (struct spi_flash *)(ptr + offset);
-
- /* Set up some basic fields - caller will sort out sizes */
- flash->spi = spi;
- flash->name = name;
- flash->poll_cmd = CMD_READ_STATUS;
-
- flash->read = spi_flash_cmd_read_fast;
- flash->write = spi_flash_cmd_write_multi;
- flash->erase = spi_flash_cmd_erase;
-
- return flash;
-}
-
-void spi_flash_free(struct spi_flash *flash)
-{
- spi_free_slave(flash->spi);
- free(flash);
-}
diff --git a/drivers/mtd/spi/sst.c b/drivers/mtd/spi/sst.c
deleted file mode 100644
index 256867c..0000000
--- a/drivers/mtd/spi/sst.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * Driver for SST serial flashes
- *
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Copyright 2008, Network Appliance Inc.
- * Jason McMullan <mcmullan@netapp.com>
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- * Copyright (c) 2008-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi_flash.h>
-
-#include "spi_flash_internal.h"
-
-#define CMD_SST_BP 0x02 /* Byte Program */
-#define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */
-
-#define SST_SR_WIP (1 << 0) /* Write-in-Progress */
-#define SST_SR_WEL (1 << 1) /* Write enable */
-#define SST_SR_BP0 (1 << 2) /* Block Protection 0 */
-#define SST_SR_BP1 (1 << 3) /* Block Protection 1 */
-#define SST_SR_BP2 (1 << 4) /* Block Protection 2 */
-#define SST_SR_AAI (1 << 6) /* Addressing mode */
-#define SST_SR_BPL (1 << 7) /* BP bits lock */
-
-#define SST_FEAT_WP (1 << 0) /* Supports AAI word program */
-#define SST_FEAT_MBP (1 << 1) /* Supports multibyte program */
-
-struct sst_spi_flash_params {
- u8 idcode1;
- u8 flags;
- u16 nr_sectors;
- const char *name;
-};
-
-struct sst_spi_flash {
- struct spi_flash flash;
- const struct sst_spi_flash_params *params;
-};
-
-static const struct sst_spi_flash_params sst_spi_flash_table[] = {
- {
- .idcode1 = 0x8d,
- .flags = SST_FEAT_WP,
- .nr_sectors = 128,
- .name = "SST25VF040B",
- },
- {
- .idcode1 = 0x8e,
- .flags = SST_FEAT_WP,
- .nr_sectors = 256,
- .name = "SST25VF080B",
- },
- {
- .idcode1 = 0x41,
- .flags = SST_FEAT_WP,
- .nr_sectors = 512,
- .name = "SST25VF016B",
- },
- {
- .idcode1 = 0x4a,
- .flags = SST_FEAT_WP,
- .nr_sectors = 1024,
- .name = "SST25VF032B",
- },
- {
- .idcode1 = 0x4b,
- .flags = SST_FEAT_MBP,
- .nr_sectors = 2048,
- .name = "SST25VF064C",
- },
- {
- .idcode1 = 0x01,
- .flags = SST_FEAT_WP,
- .nr_sectors = 16,
- .name = "SST25WF512",
- },
- {
- .idcode1 = 0x02,
- .flags = SST_FEAT_WP,
- .nr_sectors = 32,
- .name = "SST25WF010",
- },
- {
- .idcode1 = 0x03,
- .flags = SST_FEAT_WP,
- .nr_sectors = 64,
- .name = "SST25WF020",
- },
- {
- .idcode1 = 0x04,
- .flags = SST_FEAT_WP,
- .nr_sectors = 128,
- .name = "SST25WF040",
- },
- {
- .idcode1 = 0x05,
- .flags = SST_FEAT_WP,
- .nr_sectors = 256,
- .name = "SST25WF080",
- },
-};
-
-static int
-sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf)
-{
- int ret;
- u8 cmd[4] = {
- CMD_SST_BP,
- offset >> 16,
- offset >> 8,
- offset,
- };
-
- debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
- spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset);
-
- ret = spi_flash_cmd_write_enable(flash);
- if (ret)
- return ret;
-
- ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1);
- if (ret)
- return ret;
-
- return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
-}
-
-static int
-sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, const void *buf)
-{
- size_t actual, cmd_len;
- int ret;
- u8 cmd[4];
-
- ret = spi_claim_bus(flash->spi);
- if (ret) {
- debug("SF: Unable to claim SPI bus\n");
- return ret;
- }
-
- /* If the data is not word aligned, write out leading single byte */
- actual = offset % 2;
- if (actual) {
- ret = sst_byte_write(flash, offset, buf);
- if (ret)
- goto done;
- }
- offset += actual;
-
- ret = spi_flash_cmd_write_enable(flash);
- if (ret)
- goto done;
-
- cmd_len = 4;
- cmd[0] = CMD_SST_AAI_WP;
- cmd[1] = offset >> 16;
- cmd[2] = offset >> 8;
- cmd[3] = offset;
-
- for (; actual < len - 1; actual += 2) {
- debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
- spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual,
- cmd[0], offset);
-
- ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len,
- buf + actual, 2);
- if (ret) {
- debug("SF: sst word program failed\n");
- break;
- }
-
- ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
- if (ret)
- break;
-
- cmd_len = 1;
- offset += 2;
- }
-
- if (!ret)
- ret = spi_flash_cmd_write_disable(flash);
-
- /* If there is a single trailing byte, write it out */
- if (!ret && actual != len)
- ret = sst_byte_write(flash, offset, buf + actual);
-
- done:
- debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
- ret ? "failure" : "success", len, offset - actual);
-
- spi_release_bus(flash->spi);
- return ret;
-}
-
-struct spi_flash *
-spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode)
-{
- const struct sst_spi_flash_params *params;
- struct sst_spi_flash *stm;
- size_t i;
-
- for (i = 0; i < ARRAY_SIZE(sst_spi_flash_table); ++i) {
- params = &sst_spi_flash_table[i];
- if (params->idcode1 == idcode[2])
- break;
- }
-
- if (i == ARRAY_SIZE(sst_spi_flash_table)) {
- debug("SF: Unsupported SST ID %02x\n", idcode[1]);
- return NULL;
- }
-
- stm = spi_flash_alloc(struct sst_spi_flash, spi, params->name);
- if (!stm) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
- }
-
- stm->params = params;
-
- if (stm->params->flags & SST_FEAT_WP)
- stm->flash.write = sst_write_wp;
- stm->flash.page_size = 256;
- stm->flash.sector_size = 4096;
- stm->flash.size = stm->flash.sector_size * params->nr_sectors;
-
- /* Flash powers up read-only, so clear BP# bits */
- spi_flash_cmd_write_status(&stm->flash, 0);
-
- return &stm->flash;
-}
diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c
deleted file mode 100644
index c5fa64e..0000000
--- a/drivers/mtd/spi/stmicro.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright 2008, Network Appliance Inc.
- * Jason McMullan <mcmullan@netapp.com>
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi_flash.h>
-
-#include "spi_flash_internal.h"
-
-/* M25Pxx-specific commands */
-#define CMD_M25PXX_RES 0xab /* Release from DP, and Read Signature */
-
-struct stmicro_spi_flash_params {
- u16 id;
- u16 pages_per_sector;
- u16 nr_sectors;
- const char *name;
-};
-
-static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = {
- {
- .id = 0x2011,
- .pages_per_sector = 128,
- .nr_sectors = 4,
- .name = "M25P10",
- },
- {
- .id = 0x2015,
- .pages_per_sector = 256,
- .nr_sectors = 32,
- .name = "M25P16",
- },
- {
- .id = 0x2012,
- .pages_per_sector = 256,
- .nr_sectors = 4,
- .name = "M25P20",
- },
- {
- .id = 0x2016,
- .pages_per_sector = 256,
- .nr_sectors = 64,
- .name = "M25P32",
- },
- {
- .id = 0x2013,
- .pages_per_sector = 256,
- .nr_sectors = 8,
- .name = "M25P40",
- },
- {
- .id = 0x2017,
- .pages_per_sector = 256,
- .nr_sectors = 128,
- .name = "M25P64",
- },
- {
- .id = 0x2014,
- .pages_per_sector = 256,
- .nr_sectors = 16,
- .name = "M25P80",
- },
- {
- .id = 0x2018,
- .pages_per_sector = 1024,
- .nr_sectors = 64,
- .name = "M25P128",
- },
- {
- .id = 0xba16,
- .pages_per_sector = 256,
- .nr_sectors = 64,
- .name = "N25Q32",
- },
- {
- .id = 0xbb16,
- .pages_per_sector = 256,
- .nr_sectors = 64,
- .name = "N25Q32A",
- },
- {
- .id = 0xba17,
- .pages_per_sector = 256,
- .nr_sectors = 128,
- .name = "N25Q064",
- },
- {
- .id = 0xbb17,
- .pages_per_sector = 256,
- .nr_sectors = 128,
- .name = "N25Q64A",
- },
- {
- .id = 0xba18,
- .pages_per_sector = 256,
- .nr_sectors = 256,
- .name = "N25Q128",
- },
- {
- .id = 0xbb18,
- .pages_per_sector = 256,
- .nr_sectors = 256,
- .name = "N25Q128A",
- },
- {
- .id = 0xba19,
- .pages_per_sector = 256,
- .nr_sectors = 512,
- .name = "N25Q256",
- },
- {
- .id = 0xbb19,
- .pages_per_sector = 256,
- .nr_sectors = 512,
- .name = "N25Q256A",
- },
- {
- .id = 0xba20,
- .pages_per_sector = 256,
- .nr_sectors = 1024,
- .name = "N25Q512",
- },
- {
- .id = 0xbb20,
- .pages_per_sector = 256,
- .nr_sectors = 1024,
- .name = "N25Q512A",
- },
- {
- .id = 0xba21,
- .pages_per_sector = 256,
- .nr_sectors = 2048,
- .name = "N25Q1024",
- },
- {
- .id = 0xbb21,
- .pages_per_sector = 256,
- .nr_sectors = 2048,
- .name = "N25Q1024A",
- },
-};
-
-struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode)
-{
- const struct stmicro_spi_flash_params *params;
- struct spi_flash *flash;
- unsigned int i;
- u16 id;
-
- if (idcode[0] == 0xff) {
- i = spi_flash_cmd(spi, CMD_M25PXX_RES,
- idcode, 4);
- if (i)
- return NULL;
- if ((idcode[3] & 0xf0) == 0x10) {
- idcode[0] = 0x20;
- idcode[1] = 0x20;
- idcode[2] = idcode[3] + 1;
- } else {
- return NULL;
- }
- }
-
- id = ((idcode[1] << 8) | idcode[2]);
-
- for (i = 0; i < ARRAY_SIZE(stmicro_spi_flash_table); i++) {
- params = &stmicro_spi_flash_table[i];
- if (params->id == id)
- break;
- }
-
- if (i == ARRAY_SIZE(stmicro_spi_flash_table)) {
- debug("SF: Unsupported STMicro ID %04x\n", id);
- return NULL;
- }
-
- flash = spi_flash_alloc_base(spi, params->name);
- if (!flash) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
- }
-
- flash->page_size = 256;
- flash->sector_size = 256 * params->pages_per_sector;
- flash->size = flash->sector_size * params->nr_sectors;
-
- /* for >= 512MiB flashes, use flag status instead of read_status */
- if (flash->size >= 0x4000000)
- flash->poll_cmd = CMD_FLAG_STATUS;
-
- return flash;
-}
diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c
deleted file mode 100644
index b31911a..0000000
--- a/drivers/mtd/spi/winbond.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2008, Network Appliance Inc.
- * Author: Jason McMullan <mcmullan <at> netapp.com>
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <spi_flash.h>
-
-#include "spi_flash_internal.h"
-
-struct winbond_spi_flash_params {
- uint16_t id;
- uint16_t nr_blocks;
- const char *name;
-};
-
-static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
- {
- .id = 0x2014,
- .nr_blocks = 16,
- .name = "W25P80",
- },
- {
- .id = 0x2015,
- .nr_blocks = 32,
- .name = "W25P16",
- },
- {
- .id = 0x2016,
- .nr_blocks = 64,
- .name = "W25P32",
- },
- {
- .id = 0x3013,
- .nr_blocks = 8,
- .name = "W25X40",
- },
- {
- .id = 0x3015,
- .nr_blocks = 32,
- .name = "W25X16",
- },
- {
- .id = 0x3016,
- .nr_blocks = 64,
- .name = "W25X32",
- },
- {
- .id = 0x3017,
- .nr_blocks = 128,
- .name = "W25X64",
- },
- {
- .id = 0x4014,
- .nr_blocks = 16,
- .name = "W25Q80BL/W25Q80BV",
- },
- {
- .id = 0x4015,
- .nr_blocks = 32,
- .name = "W25Q16CL/W25Q16DV",
- },
- {
- .id = 0x4016,
- .nr_blocks = 64,
- .name = "W25Q32BV/W25Q32FV_SPI",
- },
- {
- .id = 0x4017,
- .nr_blocks = 128,
- .name = "W25Q64CV/W25Q64FV_SPI",
- },
- {
- .id = 0x4018,
- .nr_blocks = 256,
- .name = "W25Q128BV/W25Q128FV_SPI",
- },
- {
- .id = 0x4019,
- .nr_blocks = 512,
- .name = "W25Q256",
- },
- {
- .id = 0x5014,
- .nr_blocks = 16,
- .name = "W25Q80BW",
- },
- {
- .id = 0x6015,
- .nr_blocks = 32,
- .name = "W25Q16DW",
- },
- {
- .id = 0x6016,
- .nr_blocks = 64,
- .name = "W25Q32DW/W25Q32FV_QPI",
- },
- {
- .id = 0x6017,
- .nr_blocks = 128,
- .name = "W25Q64DW/W25Q64FV_QPI",
- },
- {
- .id = 0x6018,
- .nr_blocks = 256,
- .name = "W25Q128FW/W25Q128FV_QPI",
- },
-};
-
-struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode)
-{
- const struct winbond_spi_flash_params *params;
- struct spi_flash *flash;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(winbond_spi_flash_table); i++) {
- params = &winbond_spi_flash_table[i];
- if (params->id == ((idcode[1] << 8) | idcode[2]))
- break;
- }
-
- if (i == ARRAY_SIZE(winbond_spi_flash_table)) {
- debug("SF: Unsupported Winbond ID %02x%02x\n",
- idcode[1], idcode[2]);
- return NULL;
- }
-
- flash = spi_flash_alloc_base(spi, params->name);
- if (!flash) {
- debug("SF: Failed to allocate memory\n");
- return NULL;
- }
-
- flash->page_size = 256;
- flash->sector_size = (idcode[1] == 0x20) ? 65536 : 4096;
- flash->size = 4096 * 16 * params->nr_blocks;
-
- return flash;
-}
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 91d24ce..e5941b0 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -38,6 +38,7 @@ COBJS-$(CONFIG_FDT_SPI) += fdt_spi.o
COBJS-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
COBJS-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
COBJS-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
+COBJS-$(CONFIG_TI_QSPI) += ti_qspi.o
COBJS-$(CONFIG_XILINX_SPI) += xilinx_spi.o
COBJS-$(CONFIG_ZYNQ_SPI) += zynq_spi.o
diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c
index efc8b1e..699c57e 100644
--- a/drivers/spi/exynos_spi.c
+++ b/drivers/spi/exynos_spi.c
@@ -26,6 +26,7 @@ struct spi_bus {
struct exynos_spi *regs;
int inited; /* 1 if this bus is ready for use */
int node;
+ uint deactivate_delay_us; /* Delay to wait after deactivate */
};
/* A list of spi buses that we know about */
@@ -40,6 +41,8 @@ struct exynos_spi_slave {
enum periph_id periph_id; /* Peripheral ID for this device */
unsigned int fifo_size;
int skip_preamble;
+ struct spi_bus *bus; /* Pointer to our SPI bus info */
+ ulong last_transaction_us; /* Time of last transaction end */
};
static struct spi_bus *spi_get_bus(unsigned dev_index)
@@ -85,6 +88,7 @@ struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs,
}
bus = &spi_bus[busnum];
+ spi_slave->bus = bus;
spi_slave->regs = bus->regs;
spi_slave->mode = mode;
spi_slave->periph_id = bus->periph_id;
@@ -95,6 +99,7 @@ struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs,
spi_slave->fifo_size = 256;
spi_slave->skip_preamble = 0;
+ spi_slave->last_transaction_us = timer_get_us();
spi_slave->freq = bus->frequency;
if (max_hz)
@@ -199,12 +204,29 @@ static void spi_get_fifo_levels(struct exynos_spi *regs,
*
* @param regs SPI peripheral registers
* @param count Number of bytes to transfer
+ * @param step Number of bytes to transfer in each packet (1 or 4)
*/
-static void spi_request_bytes(struct exynos_spi *regs, int count)
+static void spi_request_bytes(struct exynos_spi *regs, int count, int step)
{
+ /* For word address we need to swap bytes */
+ if (step == 4) {
+ setbits_le32(&regs->mode_cfg,
+ SPI_MODE_CH_WIDTH_WORD | SPI_MODE_BUS_WIDTH_WORD);
+ count /= 4;
+ setbits_le32(&regs->swap_cfg, SPI_TX_SWAP_EN | SPI_RX_SWAP_EN |
+ SPI_TX_BYTE_SWAP | SPI_RX_BYTE_SWAP |
+ SPI_TX_HWORD_SWAP | SPI_RX_HWORD_SWAP);
+ } else {
+ /* Select byte access and clear the swap configuration */
+ clrbits_le32(&regs->mode_cfg,
+ SPI_MODE_CH_WIDTH_WORD | SPI_MODE_BUS_WIDTH_WORD);
+ writel(0, &regs->swap_cfg);
+ }
+
assert(count && count < (1 << 16));
setbits_le32(&regs->ch_cfg, SPI_CH_RST);
clrbits_le32(&regs->ch_cfg, SPI_CH_RST);
+
writel(count | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
}
@@ -219,6 +241,7 @@ static int spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo,
int toread;
unsigned start = get_timer(0);
int stopping;
+ int step;
out_bytes = in_bytes = todo;
@@ -226,10 +249,19 @@ static int spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo,
!(spi_slave->mode & SPI_SLAVE);
/*
+ * Try to transfer words if we can. This helps read performance at
+ * SPI clock speeds above about 20MHz.
+ */
+ step = 1;
+ if (!((todo | (uintptr_t)rxp | (uintptr_t)txp) & 3) &&
+ !spi_slave->skip_preamble)
+ step = 4;
+
+ /*
* If there's something to send, do a software reset and set a
* transaction size.
*/
- spi_request_bytes(regs, todo);
+ spi_request_bytes(regs, todo, step);
/*
* Bytes are transmitted/received in pairs. Wait to receive all the
@@ -242,24 +274,42 @@ static int spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo,
/* Keep the fifos full/empty. */
spi_get_fifo_levels(regs, &rx_lvl, &tx_lvl);
- if (tx_lvl < spi_slave->fifo_size && out_bytes) {
- temp = txp ? *txp++ : 0xff;
+
+ /*
+ * Don't completely fill the txfifo, since we don't want our
+ * rxfifo to overflow, and it may already contain data.
+ */
+ while (tx_lvl < spi_slave->fifo_size/2 && out_bytes) {
+ if (!txp)
+ temp = -1;
+ else if (step == 4)
+ temp = *(uint32_t *)txp;
+ else
+ temp = *txp;
writel(temp, &regs->tx_data);
- out_bytes--;
+ out_bytes -= step;
+ if (txp)
+ txp += step;
+ tx_lvl += step;
}
- if (rx_lvl > 0) {
- temp = readl(&regs->rx_data);
- if (spi_slave->skip_preamble) {
- if (temp == SPI_PREAMBLE_END_BYTE) {
- spi_slave->skip_preamble = 0;
- stopping = 0;
+ if (rx_lvl >= step) {
+ while (rx_lvl >= step) {
+ temp = readl(&regs->rx_data);
+ if (spi_slave->skip_preamble) {
+ if (temp == SPI_PREAMBLE_END_BYTE) {
+ spi_slave->skip_preamble = 0;
+ stopping = 0;
+ }
+ } else {
+ if (rxp || stopping) {
+ *rxp = temp;
+ rxp += step;
+ }
+ in_bytes -= step;
}
- } else {
- if (rxp || stopping)
- *rxp++ = temp;
- in_bytes--;
+ toread -= step;
+ rx_lvl -= step;
}
- toread--;
} else if (!toread) {
/*
* We have run out of input data, but haven't read
@@ -271,7 +321,7 @@ static int spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo,
out_bytes = in_bytes;
toread = in_bytes;
txp = NULL;
- spi_request_bytes(regs, toread);
+ spi_request_bytes(regs, toread, step);
}
if (spi_slave->skip_preamble && get_timer(start) > 100) {
printf("SPI timeout: in_bytes=%d, out_bytes=%d, ",
@@ -315,10 +365,14 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
if ((flags & SPI_XFER_BEGIN))
spi_cs_activate(slave);
- /* Exynos SPI limits each transfer to 65535 bytes */
+ /*
+ * Exynos SPI limits each transfer to 65535 transfers. To keep
+ * things simple, allow a maximum of 65532 bytes. We could allow
+ * more in word mode, but the performance difference is small.
+ */
bytelen = bitlen / 8;
for (upto = 0; !ret && upto < bytelen; upto += todo) {
- todo = min(bytelen - upto, (1 << 16) - 1);
+ todo = min(bytelen - upto, (1 << 16) - 4);
ret = spi_rx_tx(spi_slave, todo, &din, &dout, flags);
if (ret)
break;
@@ -359,9 +413,22 @@ void spi_cs_activate(struct spi_slave *slave)
{
struct exynos_spi_slave *spi_slave = to_exynos_spi(slave);
+ /* If it's too soon to do another transaction, wait */
+ if (spi_slave->bus->deactivate_delay_us &&
+ spi_slave->last_transaction_us) {
+ ulong delay_us; /* The delay completed so far */
+ delay_us = timer_get_us() - spi_slave->last_transaction_us;
+ if (delay_us < spi_slave->bus->deactivate_delay_us)
+ udelay(spi_slave->bus->deactivate_delay_us - delay_us);
+ }
+
clrbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT);
debug("Activate CS, bus %d\n", spi_slave->slave.bus);
spi_slave->skip_preamble = spi_slave->mode & SPI_PREAMBLE;
+
+ /* Remember time of this transaction so we can honour the bus delay */
+ if (spi_slave->bus->deactivate_delay_us)
+ spi_slave->last_transaction_us = timer_get_us();
}
/**
@@ -411,6 +478,8 @@ static int spi_get_config(const void *blob, int node, struct spi_bus *bus)
/* Use 500KHz as a suitable default */
bus->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
500000);
+ bus->deactivate_delay_us = fdtdec_get_int(blob, node,
+ "spi-deactivate-delay", 0);
return 0;
}
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
new file mode 100644
index 0000000..5a5b482
--- /dev/null
+++ b/drivers/spi/ti_qspi.c
@@ -0,0 +1,311 @@
+/*
+ * TI QSPI driver
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/omap.h>
+#include <malloc.h>
+#include <spi.h>
+
+/* ti qpsi register bit masks */
+#define QSPI_TIMEOUT 2000000
+#define QSPI_FCLK 192000000
+/* clock control */
+#define QSPI_CLK_EN (1 << 31)
+#define QSPI_CLK_DIV_MAX 0xffff
+/* command */
+#define QSPI_EN_CS(n) (n << 28)
+#define QSPI_WLEN(n) ((n-1) << 19)
+#define QSPI_3_PIN (1 << 18)
+#define QSPI_RD_SNGL (1 << 16)
+#define QSPI_WR_SNGL (2 << 16)
+#define QSPI_INVAL (4 << 16)
+#define QSPI_RD_QUAD (7 << 16)
+/* device control */
+#define QSPI_DD(m, n) (m << (3 + n*8))
+#define QSPI_CKPHA(n) (1 << (2 + n*8))
+#define QSPI_CSPOL(n) (1 << (1 + n*8))
+#define QSPI_CKPOL(n) (1 << (n*8))
+/* status */
+#define QSPI_WC (1 << 1)
+#define QSPI_BUSY (1 << 0)
+#define QSPI_WC_BUSY (QSPI_WC | QSPI_BUSY)
+#define QSPI_XFER_DONE QSPI_WC
+#define MM_SWITCH 0x01
+#define MEM_CS 0x100
+#define MEM_CS_UNSELECT 0xfffff0ff
+#define MMAP_START_ADDR 0x5c000000
+#define CORE_CTRL_IO 0x4a002558
+
+#define QSPI_CMD_READ (0x3 << 0)
+#define QSPI_CMD_READ_QUAD (0x6b << 0)
+#define QSPI_CMD_READ_FAST (0x0b << 0)
+#define QSPI_SETUP0_NUM_A_BYTES (0x2 << 8)
+#define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
+#define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10)
+#define QSPI_SETUP0_READ_NORMAL (0x0 << 12)
+#define QSPI_SETUP0_READ_QUAD (0x3 << 12)
+#define QSPI_CMD_WRITE (0x2 << 16)
+#define QSPI_NUM_DUMMY_BITS (0x0 << 24)
+
+/* ti qspi register set */
+struct ti_qspi_regs {
+ u32 pid;
+ u32 pad0[3];
+ u32 sysconfig;
+ u32 pad1[3];
+ u32 int_stat_raw;
+ u32 int_stat_en;
+ u32 int_en_set;
+ u32 int_en_ctlr;
+ u32 intc_eoi;
+ u32 pad2[3];
+ u32 clk_ctrl;
+ u32 dc;
+ u32 cmd;
+ u32 status;
+ u32 data;
+ u32 setup0;
+ u32 setup1;
+ u32 setup2;
+ u32 setup3;
+ u32 memswitch;
+ u32 data1;
+ u32 data2;
+ u32 data3;
+};
+
+/* ti qspi slave */
+struct ti_qspi_slave {
+ struct spi_slave slave;
+ struct ti_qspi_regs *base;
+ unsigned int mode;
+ u32 cmd;
+ u32 dc;
+};
+
+static inline struct ti_qspi_slave *to_ti_qspi_slave(struct spi_slave *slave)
+{
+ return container_of(slave, struct ti_qspi_slave, slave);
+}
+
+static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave)
+{
+ struct spi_slave *slave = &qslave->slave;
+ u32 memval = 0;
+
+ slave->memory_map = (void *)MMAP_START_ADDR;
+
+ memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
+ QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
+ QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
+ QSPI_NUM_DUMMY_BITS;
+
+ writel(memval, &qslave->base->setup0);
+}
+
+static void ti_spi_set_speed(struct spi_slave *slave, uint hz)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+ uint clk_div;
+
+ debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
+
+ if (!hz)
+ clk_div = 0;
+ else
+ clk_div = (QSPI_FCLK / hz) - 1;
+
+ /* disable SCLK */
+ writel(readl(&qslave->base->clk_ctrl) & ~QSPI_CLK_EN,
+ &qslave->base->clk_ctrl);
+
+ /* assign clk_div values */
+ if (clk_div < 0)
+ clk_div = 0;
+ else if (clk_div > QSPI_CLK_DIV_MAX)
+ clk_div = QSPI_CLK_DIV_MAX;
+
+ /* enable SCLK */
+ writel(QSPI_CLK_EN | clk_div, &qslave->base->clk_ctrl);
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return 1;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ /* CS handled in xfer */
+ return;
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+
+ debug("spi_cs_deactivate: 0x%08x\n", (u32)slave);
+
+ writel(qslave->cmd | QSPI_INVAL, &qslave->base->cmd);
+}
+
+void spi_init(void)
+{
+ /* nothing to do */
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct ti_qspi_slave *qslave;
+
+ qslave = spi_alloc_slave(struct ti_qspi_slave, bus, cs);
+ if (!qslave) {
+ printf("SPI_error: Fail to allocate ti_qspi_slave\n");
+ return NULL;
+ }
+
+ qslave->base = (struct ti_qspi_regs *)QSPI_BASE;
+ qslave->mode = mode;
+
+ ti_spi_set_speed(&qslave->slave, max_hz);
+
+#ifdef CONFIG_TI_SPI_MMAP
+ ti_spi_setup_spi_register(qslave);
+#endif
+
+ return &qslave->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+ free(qslave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+
+ debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
+
+ qslave->dc = 0;
+ if (qslave->mode & SPI_CPHA)
+ qslave->dc |= QSPI_CKPHA(slave->cs);
+ if (qslave->mode & SPI_CPOL)
+ qslave->dc |= QSPI_CKPOL(slave->cs);
+ if (qslave->mode & SPI_CS_HIGH)
+ qslave->dc |= QSPI_CSPOL(slave->cs);
+
+ writel(qslave->dc, &qslave->base->dc);
+ writel(0, &qslave->base->cmd);
+ writel(0, &qslave->base->data);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+
+ debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs);
+
+ writel(0, &qslave->base->dc);
+ writel(0, &qslave->base->cmd);
+ writel(0, &qslave->base->data);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
+{
+ struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave);
+ uint words = bitlen >> 3; /* fixed 8-bit word length */
+ const uchar *txp = dout;
+ uchar *rxp = din;
+ uint status;
+ int timeout, val;
+
+ debug("spi_xfer: bus:%i cs:%i bitlen:%i words:%i flags:%lx\n",
+ slave->bus, slave->cs, bitlen, words, flags);
+
+ /* Setup mmap flags */
+ if (flags & SPI_XFER_MMAP) {
+ writel(MM_SWITCH, &qslave->base->memswitch);
+ val = readl(CORE_CTRL_IO);
+ val |= MEM_CS;
+ writel(val, CORE_CTRL_IO);
+ return 0;
+ } else if (flags & SPI_XFER_MMAP_END) {
+ writel(~MM_SWITCH, &qslave->base->memswitch);
+ val = readl(CORE_CTRL_IO);
+ val &= MEM_CS_UNSELECT;
+ writel(val, CORE_CTRL_IO);
+ return 0;
+ }
+
+ if (bitlen == 0)
+ return -1;
+
+ if (bitlen % 8) {
+ debug("spi_xfer: Non byte aligned SPI transfer\n");
+ return -1;
+ }
+
+ /* Setup command reg */
+ qslave->cmd = 0;
+ qslave->cmd |= QSPI_WLEN(8);
+ qslave->cmd |= QSPI_EN_CS(slave->cs);
+ if (flags & SPI_3WIRE)
+ qslave->cmd |= QSPI_3_PIN;
+ qslave->cmd |= 0xfff;
+
+ while (words--) {
+ if (txp) {
+ debug("tx cmd %08x dc %08x data %02x\n",
+ qslave->cmd | QSPI_WR_SNGL, qslave->dc, *txp);
+ writel(*txp++, &qslave->base->data);
+ writel(qslave->cmd | QSPI_WR_SNGL,
+ &qslave->base->cmd);
+ status = readl(&qslave->base->status);
+ timeout = QSPI_TIMEOUT;
+ while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
+ if (--timeout < 0) {
+ printf("spi_xfer: TX timeout!\n");
+ return -1;
+ }
+ status = readl(&qslave->base->status);
+ }
+ debug("tx done, status %08x\n", status);
+ }
+ if (rxp) {
+ qslave->cmd |= QSPI_RD_SNGL;
+ debug("rx cmd %08x dc %08x\n",
+ qslave->cmd, qslave->dc);
+ writel(qslave->cmd, &qslave->base->cmd);
+ status = readl(&qslave->base->status);
+ timeout = QSPI_TIMEOUT;
+ while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
+ if (--timeout < 0) {
+ printf("spi_xfer: RX timeout!\n");
+ return -1;
+ }
+ status = readl(&qslave->base->status);
+ }
+ *rxp++ = readl(&qslave->base->data);
+ debug("rx done, status %08x, read %02x\n",
+ status, *(rxp-1));
+ }
+ }
+
+ /* Terminate frame */
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ return 0;
+}
diff --git a/include/common.h b/include/common.h
index f1a590a..bed4316 100644
--- a/include/common.h
+++ b/include/common.h
@@ -596,6 +596,12 @@ void ddr_enable_ecc(unsigned int dram_size);
#endif
#endif
+/*
+ * Return the current value of a monotonically increasing microsecond timer.
+ * Granularity may be larger than 1us if hardware does not support this.
+ */
+ulong timer_get_us(void);
+
/* $(CPU)/cpu.c */
static inline int cpumask_next(int cpu, unsigned int mask)
{
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 7b120de..51e0e80 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -48,4 +48,23 @@
#define CONFIG_PHYLIB
#define CONFIG_PHY_ADDR 2
+/* SPI */
+#undef CONFIG_OMAP3_SPI
+#define CONFIG_TI_QSPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_TI_SPI_MMAP
+#define CONFIG_SF_DEFAULT_SPEED 48000000
+#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
+
+/* SPI SPL */
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
+
#endif /* __CONFIG_DRA7XX_EVM_H */
diff --git a/include/configs/top9000.h b/include/configs/top9000.h
index 65dabde..a6d6928 100644
--- a/include/configs/top9000.h
+++ b/include/configs/top9000.h
@@ -120,7 +120,6 @@
#define CONFIG_ATMEL_SPI0 /* SPI used for FRAM is SPI0 */
#define FRAM_SPI_BUS 0
#define FRAM_CS_NUM 0
-#define CONFIG_SPI_FLASH /* RAMTRON FRAM on SPI bus */
#define CONFIG_SPI_FRAM_RAMTRON
#define CONFIG_SF_DEFAULT_SPEED 1000000 /* be conservative here... */
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
diff --git a/include/spi.h b/include/spi.h
index c0dab57..5164d43 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -25,29 +25,33 @@
#define SPI_PREAMBLE 0x80 /* Skip preamble bytes */
/* SPI transfer flags */
-#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */
-#define SPI_XFER_END 0x02 /* Deassert CS after transfer */
+#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */
+#define SPI_XFER_END 0x02 /* Deassert CS after transfer */
+#define SPI_XFER_MMAP 0x08 /* Memory Mapped start */
+#define SPI_XFER_MMAP_END 0x10 /* Memory Mapped End */
/* Header byte that marks the start of the message */
#define SPI_PREAMBLE_END_BYTE 0xec
-/*-----------------------------------------------------------------------
- * Representation of a SPI slave, i.e. what we're communicating with.
+/**
+ * struct spi_slave - Representation of a SPI slave
*
* Drivers are expected to extend this with controller-specific data.
*
- * bus: ID of the bus that the slave is attached to.
- * cs: ID of the chip select connected to the slave.
- * max_write_size: If non-zero, the maximum number of bytes which can
- * be written at once, excluding command bytes.
+ * @bus: ID of the bus that the slave is attached to.
+ * @cs: ID of the chip select connected to the slave.
+ * @max_write_size: If non-zero, the maximum number of bytes which can
+ * be written at once, excluding command bytes.
+ * @memory_map: Address of read-only SPI flash access.
*/
struct spi_slave {
- unsigned int bus;
- unsigned int cs;
+ unsigned int bus;
+ unsigned int cs;
unsigned int max_write_size;
+ void *memory_map;
};
-/*-----------------------------------------------------------------------
+/**
* Initialization, must be called once on start up.
*
* TODO: I don't think we really need this.
@@ -60,10 +64,10 @@ void spi_init(void);
* Allocate and zero all fields in the spi slave, and set the bus/chip
* select. Use the helper macro spi_alloc_slave() to call this.
*
- * @offset: Offset of struct spi_slave within slave structure
- * @size: Size of slave structure
- * @bus: Bus ID of the slave chip.
- * @cs: Chip select ID of the slave chip on the specified bus.
+ * @offset: Offset of struct spi_slave within slave structure.
+ * @size: Size of slave structure.
+ * @bus: Bus ID of the slave chip.
+ * @cs: Chip select ID of the slave chip on the specified bus.
*/
void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
unsigned int cs);
@@ -74,10 +78,10 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
* Allocate and zero all fields in the spi slave, and set the bus/chip
* select.
*
- * @_struct: Name of structure to allocate (e.g. struct tegra_spi). This
- * structure must contain a member 'struct spi_slave *slave'.
- * @bus: Bus ID of the slave chip.
- * @cs: Chip select ID of the slave chip on the specified bus.
+ * @_struct: Name of structure to allocate (e.g. struct tegra_spi).
+ * This structure must contain a member 'struct spi_slave *slave'.
+ * @bus: Bus ID of the slave chip.
+ * @cs: Chip select ID of the slave chip on the specified bus.
*/
#define spi_alloc_slave(_struct, bus, cs) \
spi_do_alloc_slave(offsetof(_struct, slave), \
@@ -89,13 +93,13 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
* Allocate and zero all fields in the spi slave, and set the bus/chip
* select.
*
- * @bus: Bus ID of the slave chip.
- * @cs: Chip select ID of the slave chip on the specified bus.
+ * @bus: Bus ID of the slave chip.
+ * @cs: Chip select ID of the slave chip on the specified bus.
*/
#define spi_alloc_slave_base(bus, cs) \
spi_do_alloc_slave(0, sizeof(struct spi_slave), bus, cs)
-/*-----------------------------------------------------------------------
+/**
* Set up communications parameters for a SPI slave.
*
* This must be called once for each slave. Note that this function
@@ -103,10 +107,10 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
* contents of spi_slave so that the hardware can be easily
* initialized later.
*
- * bus: Bus ID of the slave chip.
- * cs: Chip select ID of the slave chip on the specified bus.
- * max_hz: Maximum SCK rate in Hz.
- * mode: Clock polarity, clock phase and other parameters.
+ * @bus: Bus ID of the slave chip.
+ * @cs: Chip select ID of the slave chip on the specified bus.
+ * @max_hz: Maximum SCK rate in Hz.
+ * @mode: Clock polarity, clock phase and other parameters.
*
* Returns: A spi_slave reference that can be used in subsequent SPI
* calls, or NULL if one or more of the parameters are not supported.
@@ -114,14 +118,14 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode);
-/*-----------------------------------------------------------------------
+/**
* Free any memory associated with a SPI slave.
*
- * slave: The SPI slave
+ * @slave: The SPI slave
*/
void spi_free_slave(struct spi_slave *slave);
-/*-----------------------------------------------------------------------
+/**
* Claim the bus and prepare it for communication with a given slave.
*
* This must be called before doing any transfers with a SPI slave. It
@@ -130,25 +134,25 @@ void spi_free_slave(struct spi_slave *slave);
* allowed to claim the same bus for several slaves without releasing
* the bus in between.
*
- * slave: The SPI slave
+ * @slave: The SPI slave
*
* Returns: 0 if the bus was claimed successfully, or a negative value
* if it wasn't.
*/
int spi_claim_bus(struct spi_slave *slave);
-/*-----------------------------------------------------------------------
+/**
* Release the SPI bus
*
* This must be called once for every call to spi_claim_bus() after
* all transfers have finished. It may disable any SPI hardware as
* appropriate.
*
- * slave: The SPI slave
+ * @slave: The SPI slave
*/
void spi_release_bus(struct spi_slave *slave);
-/*-----------------------------------------------------------------------
+/**
* SPI transfer
*
* This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks
@@ -161,19 +165,19 @@ void spi_release_bus(struct spi_slave *slave);
* temporary variables, this is OK).
*
* spi_xfer() interface:
- * slave: The SPI slave which will be sending/receiving the data.
- * bitlen: How many bits to write and read.
- * dout: Pointer to a string of bits to send out. The bits are
+ * @slave: The SPI slave which will be sending/receiving the data.
+ * @bitlen: How many bits to write and read.
+ * @dout: Pointer to a string of bits to send out. The bits are
* held in a byte array and are sent MSB first.
- * din: Pointer to a string of bits that will be filled in.
- * flags: A bitwise combination of SPI_XFER_* flags.
+ * @din: Pointer to a string of bits that will be filled in.
+ * @flags: A bitwise combination of SPI_XFER_* flags.
*
- * Returns: 0 on success, not 0 on failure
+ * Returns: 0 on success, not 0 on failure
*/
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
void *din, unsigned long flags);
-/*-----------------------------------------------------------------------
+/**
* Determine if a SPI chipselect is valid.
* This function is provided by the board if the low-level SPI driver
* needs it to determine if a given chipselect is actually valid.
@@ -183,7 +187,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
*/
int spi_cs_is_valid(unsigned int bus, unsigned int cs);
-/*-----------------------------------------------------------------------
+/**
* Activate a SPI chipselect.
* This function is provided by the board code when using a driver
* that can't control its chipselects automatically (e.g.
@@ -192,7 +196,7 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs);
*/
void spi_cs_activate(struct spi_slave *slave);
-/*-----------------------------------------------------------------------
+/**
* Deactivate a SPI chipselect.
* This function is provided by the board code when using a driver
* that can't control its chipselects automatically (e.g.
@@ -201,18 +205,18 @@ void spi_cs_activate(struct spi_slave *slave);
*/
void spi_cs_deactivate(struct spi_slave *slave);
-/*-----------------------------------------------------------------------
+/**
* Set transfer speed.
* This sets a new speed to be applied for next spi_xfer().
- * slave: The SPI slave
- * hz: The transfer speed
+ * @slave: The SPI slave
+ * @hz: The transfer speed
*/
void spi_set_speed(struct spi_slave *slave, uint hz);
-/*-----------------------------------------------------------------------
+/**
* Write 8 bits, then read 8 bits.
- * slave: The SPI slave we're communicating with
- * byte: Byte to be written
+ * @slave: The SPI slave we're communicating with
+ * @byte: Byte to be written
*
* Returns: The value that was read, or a negative value on error.
*
diff --git a/include/spi_flash.h b/include/spi_flash.h
index bfc59aa..1ff5af4 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -1,7 +1,8 @@
/*
- * Interface to SPI flash
+ * Common SPI flash Interface
*
* Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -10,6 +11,7 @@
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
+
#ifndef _SPI_FLASH_H_
#define _SPI_FLASH_H_
@@ -17,75 +19,52 @@
#include <linux/types.h>
#include <linux/compiler.h>
+/**
+ * struct spi_flash - SPI flash structure
+ *
+ * @spi: SPI slave
+ * @name: Name of SPI flash
+ * @size: Total flash size
+ * @page_size: Write (page) size
+ * @sector_size: Sector size
+ * @erase_size: Erase size
+ * @bank_read_cmd: Bank read cmd
+ * @bank_write_cmd: Bank write cmd
+ * @bank_curr: Current flash bank
+ * @poll_cmd: Poll cmd - for flash erase/program
+ * @erase_cmd: Erase cmd 4K, 32K, 64K
+ * @memory_map: Address of read-only SPI flash access
+ * @read: Flash read ops: Read len bytes at offset into buf
+ * Supported cmds: Fast Array Read
+ * @write: Flash write ops: Write len bytes from buf into offeset
+ * Supported cmds: Page Program
+ * @erase: Flash erase ops: Erase len bytes from offset
+ * Supported cmds: Sector erase 4K, 32K, 64K
+ * return 0 - Sucess, 1 - Failure
+ */
struct spi_flash {
struct spi_slave *spi;
+ const char *name;
- const char *name;
-
- /* Total flash size */
- u32 size;
- /* Write (page) size */
- u32 page_size;
- /* Erase (sector) size */
- u32 sector_size;
+ u32 size;
+ u32 page_size;
+ u32 sector_size;
+ u32 erase_size;
#ifdef CONFIG_SPI_FLASH_BAR
- /* Bank read cmd */
- u8 bank_read_cmd;
- /* Bank write cmd */
- u8 bank_write_cmd;
- /* Current flash bank */
- u8 bank_curr;
+ u8 bank_read_cmd;
+ u8 bank_write_cmd;
+ u8 bank_curr;
#endif
- /* Poll cmd - for flash erase/program */
- u8 poll_cmd;
+ u8 poll_cmd;
+ u8 erase_cmd;
- void *memory_map; /* Address of read-only SPI flash access */
- int (*read)(struct spi_flash *flash, u32 offset,
- size_t len, void *buf);
- int (*write)(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf);
- int (*erase)(struct spi_flash *flash, u32 offset,
- size_t len);
+ void *memory_map;
+ int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);
+ int (*write)(struct spi_flash *flash, u32 offset, size_t len,
+ const void *buf);
+ int (*erase)(struct spi_flash *flash, u32 offset, size_t len);
};
-/**
- * spi_flash_do_alloc - Allocate a new spi flash structure
- *
- * The structure is allocated and cleared with default values for
- * read, write and erase, which the caller can modify. The caller must set
- * up size, page_size and sector_size.
- *
- * Use the helper macro spi_flash_alloc() to call this.
- *
- * @offset: Offset of struct spi_slave within slave structure
- * @size: Size of slave structure
- * @spi: SPI slave
- * @name: Name of SPI flash device
- */
-void *spi_flash_do_alloc(int offset, int size, struct spi_slave *spi,
- const char *name);
-
-/**
- * spi_flash_alloc - Allocate a new SPI flash structure
- *
- * @_struct: Name of structure to allocate (e.g. struct ramtron_spi_fram). This
- * structure must contain a member 'struct spi_flash *flash'.
- * @spi: SPI slave
- * @name: Name of SPI flash device
- */
-#define spi_flash_alloc(_struct, spi, name) \
- spi_flash_do_alloc(offsetof(_struct, flash), sizeof(_struct), \
- spi, name)
-
-/**
- * spi_flash_alloc_base - Allocate a new SPI flash structure with no private data
- *
- * @spi: SPI slave
- * @name: Name of SPI flash device
- */
-#define spi_flash_alloc_base(spi, name) \
- spi_flash_do_alloc(0, sizeof(struct spi_flash), spi, name)
-
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode);
void spi_flash_free(struct spi_flash *flash);