powerpc: remove genietv board support

Enough time has passed since this board was moved to Orphan. Remove.

 - Remove board/genietv/*
 - Remove include/configs/GENIETV.h
 - Clean-up if defined(CONFIG_GENIETV)
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

11 files changed, 1 insertions, 1429 deletions

diff --git a/board/genietv/Makefile b/board/genietv/Makefile
deleted file mode 100644
index fd11f14..0000000
--- a/board/genietv/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= genietv.o flash.o
diff --git a/board/genietv/flash.c b/board/genietv/flash.c
deleted file mode 100644
index 5f57978..0000000
--- a/board/genietv/flash.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * (C) Copyright 2000-2011
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long *addr, flash_info_t *info);
-static int write_word(flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets(ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
-	unsigned long size_b0;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-
-	/* Detect size */
-	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE,
-			&flash_info[0]);
-
-	/* Setup offsets */
-	flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* Monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-	flash_info[0].size = size_b0;
-
-	return size_b0;
-}
-
-/*-----------------------------------------------------------------------
- * Fix this to support variable sector sizes
-*/
-static void flash_get_offsets(ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
-		/* set sector offsets for bottom boot block type	*/
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		puts("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf("FUJITSU ");
-		break;
-	case FLASH_MAN_BM:
-		printf("BRIGHT MICRO ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:
-		printf("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
-		break;
-	case FLASH_AM400B:
-		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:
-		printf("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:
-		printf("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:
-		printf("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:
-		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:
-		printf("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	default:
-		printf("Unknown Chip Type\n");
-		break;
-	}
-
-	if (info->size >> 20) {
-		printf("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20,
-			info->sector_count);
-	} else {
-		printf("  Size: %ld KB in %d Sectors\n",
-			info->size >> 10,
-			info->sector_count);
-	}
-
-	puts("  Sector Start Addresses:");
-
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			puts("\n   ");
-
-		printf(" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-
-	putc('\n');
-	return;
-}
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size(vu_long *addr, flash_info_t *info)
-{
-	short i;
-	volatile unsigned char *caddr;
-	char value;
-
-	caddr = (volatile unsigned char *)addr ;
-
-	/* Write auto select command: read Manufacturer ID */
-
-	debug("Base address is: %8p\n", caddr);
-
-	caddr[0x0555] = 0xAA;
-	caddr[0x02AA] = 0x55;
-	caddr[0x0555] = 0x90;
-
-	value = caddr[0];
-
-	debug("Manufact ID: %02x\n", value);
-
-	switch (value) {
-	case 0x1: /* AMD_MANUFACT */
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case 0x4: /* FUJ_MANUFACT */
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	value = caddr[1];			/* device ID		*/
-
-	debug("Device ID: %02x\n", value);
-
-	switch (value) {
-	case AMD_ID_LV040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x00080000;
-		break;				/* => 512Kb		*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return 0;			/* => no or unknown flash */
-	}
-
-	flash_get_offsets((ulong)addr, &flash_info[0]);
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/*
-		 * read sector protection at sector address,
-		 * (A7 .. A0) = 0x02
-		 * D0 = 1 if protected
-		 */
-		caddr = (volatile unsigned char *)(info->start[i]);
-		info->protect[i] = caddr[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		caddr = (volatile unsigned char *)info->start[0];
-		*caddr = 0xF0;	/* reset bank */
-	}
-
-	return info->size;
-}
-
-int	flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	volatile unsigned char *addr =
-		(volatile unsigned char *)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN)
-			printf("- missing\n");
-		else
-			printf("- no sectors to erase\n");
-
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect])
-			prot++;
-	}
-
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-	addr[0x0555] = 0x80;
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (volatile unsigned char *)(info->start[sect]);
-			addr[0] = 0x30;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay(1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer(0);
-	last  = start;
-	addr = (volatile unsigned char *)(info->start[l_sect]);
-
-	while ((addr[0] & 0xFF) != 0xFF) {
-
-		now = get_timer(start);
-
-		if (now > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (volatile unsigned char *)info->start[0];
-
-	addr[0] = 0xF0;	/* reset bank */
-
-	printf(" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	l = addr - wp;
-
-	if (l != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp)
-			data = (data << 8) | (*(uchar *)cp);
-
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 4; ++i, ++cp)
-			data = (data << 8) | (*(uchar *)cp);
-
-		rc = write_word(info, wp, data);
-
-		if (rc != 0)
-			return rc;
-
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i = 0; i < 4; ++i)
-			data = (data << 8) | *src++;
-
-		rc = write_word(info, wp, data);
-
-		if (rc != 0)
-			return rc;
-
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0)
-		return 0;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < 4; ++i, ++cp)
-		data = (data << 8) | (*(uchar *)cp);
-
-	return write_word(info, wp, data);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word(flash_info_t *info, ulong dest, ulong data)
-{
-	volatile unsigned char *cdest, *cdata;
-	volatile unsigned char *addr =
-		(volatile unsigned char *)(info->start[0]);
-	ulong start;
-	int flag, count = 4 ;
-
-	cdest = (volatile unsigned char *)dest ;
-	cdata = (volatile unsigned char *)&data ;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data)
-		return 2;
-
-	while (count--) {
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr[0x0555] = 0xAA;
-		addr[0x02AA] = 0x55;
-		addr[0x0555] = 0xA0;
-
-		*cdest = *cdata;
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* data polling for D7 */
-		start = get_timer(0);
-		while ((*cdest ^ *cdata) & 0x80) {
-			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
-				return 1;
-		}
-
-		cdata++ ;
-		cdest++ ;
-	}
-	return 0;
-}
diff --git a/board/genietv/genietv.c b/board/genietv/genietv.c
deleted file mode 100644
index 0a015ea..0000000
--- a/board/genietv/genietv.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * genietv/genietv.c
- *
- * The GENIETV is using the following physical memorymap (copied from
- * the FADS configuration):
- *
- * ff020000 -> ff02ffff : pcmcia
- * ff010000 -> ff01ffff : BCSR       connected to CS1, setup by 8xxROM
- * ff000000 -> ff00ffff : IMAP       internal in the cpu
- * 02800000 -> 0287ffff : flash      connected to CS0
- * 00000000 -> nnnnnnnn : sdram      setup by U-Boot
- *
- * CS pins are connected as follows:
- *
- * CS0 -512Kb boot flash
- * CS1 - SDRAM #1
- * CS2 - SDRAM #2
- * CS3 - Flash #1
- * CS4 - Flash #2
- * CS5 - LON (if present)
- * CS6 - PCMCIA #1
- * CS7 - PCMCIA #2
- *
- * Ports are configured as follows:
- *
- * PA7 - SDRAM banks enable
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#define CONFIG_SYS_PA7		0x0100
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 0 in UPMB RAM)
-	 */
-	0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBEEC00,
-	0x1FFDDC47,		/* last */
-	/*
-	 * SDRAM Initialization (offset 5 in UPMB RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-	0x1FFDDC34, 0xEFEEAC34, 0x1FBD5C35,	/* last */
-	/*
-	 * Burst Read. (Offset 8 in UPMB RAM)
-	 */
-	0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
-	0xF0AFFC00, 0xF1AFFC00, 0xEFBEEC00, 0x1FFDDC47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPMB RAM)
-	 */
-	0x1F2DFC04, 0xEEAFAC00, 0x01BE4C04, 0x1FFDDC47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Write. (Offset 20 in UPMB RAM)
-	 */
-	0x1F0DFC04, 0xEEAFAC00, 0x10AF5C00, 0xF0AFFC00,
-	0xF0AFFC00, 0xE1BEEC04, 0x1FFDDC47,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Refresh  (Offset 30 in UPMB RAM)
-	 */
-	0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
-	0xFFFFFC84, 0xFFFFFC07,	/* last */
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Exception. (Offset 3c in UPMB RAM)
-	 */
-	0x7FFFFC07,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity
- */
-
-int checkboard (void)
-{
-	puts ("Board: GenieTV\n");
-	return 0;
-}
-
-#if 0
-static void PrintState (void)
-{
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &im->im_memctl;
-
-	printf ("\n0 - FLASH: B=%08x O=%08x", memctl->memc_br0,
-		memctl->memc_or0);
-	printf ("\n1 - SDRAM: B=%08x O=%08x", memctl->memc_br1,
-		memctl->memc_or1);
-	printf ("\n2 - SDRAM: B=%08x O=%08x", memctl->memc_br2,
-		memctl->memc_or2);
-}
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &im->im_memctl;
-	long int size_b0, size_b1, size8;
-
-	/* Enable SDRAM */
-
-	/* Configuring PA7 for general purpouse output pin */
-	im->im_ioport.iop_papar &= ~CONFIG_SYS_PA7;	/* 0 = general purpouse */
-	im->im_ioport.iop_padir |= CONFIG_SYS_PA7;	/* 1 = output */
-
-	/* Enable SDRAM - PA7 = 1 */
-	im->im_ioport.iop_padat |= CONFIG_SYS_PA7;	/* value of PA7 */
-
-	/*
-	 * Preliminary prescaler for refresh (depends on number of
-	 * banks): This value is selected for four cycles every 62.4 us
-	 * with two SDRAM banks or four cycles every 31.2 us with one
-	 * bank. It will be adjusted after memory sizing.
-	 */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
-
-	memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL;
-
-	upmconfig (UPMB, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	/*
-	 * Map controller banks 1 and 2 to the SDRAM banks 1 and 2 at
-	 * preliminary addresses - these have to be modified after the
-	 * SDRAM size has been determined.
-	 */
-
-	memctl->memc_or1 = 0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM;
-	memctl->memc_br1 =
-		((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V);
-
-	memctl->memc_or2 = 0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM;
-	memctl->memc_br2 =
-		((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V);
-
-	/* perform SDRAM initialization sequence */
-	memctl->memc_mar = 0x00000088;
-
-	memctl->memc_mcr = 0x80802105;	/* SDRAM bank 0 */
-
-	memctl->memc_mcr = 0x80804105;	/* SDRAM bank 1 */
-
-	/* Execute refresh 8 times */
-	memctl->memc_mbmr = (CONFIG_SYS_MBMR_8COL & ~MBMR_TLFB_MSK) | MBMR_TLFB_8X;
-
-	memctl->memc_mcr = 0x80802130;	/* SDRAM bank 0 - execute twice */
-
-	memctl->memc_mcr = 0x80804130;	/* SDRAM bank 1 - execute twice */
-
-	/* Execute refresh 4 times */
-	memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL;
-
-	/*
-	 * Check Bank 0 Memory Size for re-configuration
-	 *
-	 * try 8 column mode
-	 */
-
-#if 0
-	PrintState ();
-#endif
-/*    printf ("\nChecking bank1..."); */
-	size8 = dram_size (CONFIG_SYS_MBMR_8COL, (long *) SDRAM_BASE1_PRELIM,
-			   SDRAM_MAX_SIZE);
-
-	size_b0 = size8;
-
-/*    printf ("\nChecking bank2..."); */
-	size_b1 =
-		dram_size (memctl->memc_mbmr, (long *) SDRAM_BASE2_PRELIM,
-			   SDRAM_MAX_SIZE);
-
-	/*
-	 * Final mapping: map bigger bank first
-	 */
-
-	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
-
-	if (size_b1 > 0) {
-		/*
-		 * Position Bank 1 immediately above Bank 0
-		 */
-		memctl->memc_or2 =
-			((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-		memctl->memc_br2 =
-			((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) +
-			(size_b0 & BR_BA_MSK);
-	} else {
-		/*
-		 * No bank 1
-		 *
-		 * invalidate bank
-		 */
-		memctl->memc_br2 = 0;
-		/* adjust refresh rate depending on SDRAM type, one bank */
-		memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K;
-	}
-
-	/* If no memory detected, disable SDRAM */
-	if ((size_b0 + size_b1) == 0) {
-		printf ("disabling SDRAM!\n");
-		/* Disable SDRAM - PA7 = 1 */
-		im->im_ioport.iop_padat &= ~CONFIG_SYS_PA7;	/* value of PA7 */
-	}
-/*	else */
-/*    printf("done! (%08lx)\n", size_b0 + size_b1); */
-
-#if 0
-	PrintState ();
-#endif
-	return (size_b0 + size_b1);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mbmr_value, long int *base,
-			   long int maxsize)
-{
-	long size;
-
-	/*memctl->memc_mbmr = mbmr_value; */
-
-	size = get_ram_size (base, maxsize);
-
-	if (size) {
-/*      printf("(%08lx)", size); */
-	} else {
-		printf ("(0)");
-	}
-
-	return (size);
-}
-
-#if defined(CONFIG_CMD_PCMCIA)
-
-#ifdef	CONFIG_SYS_PCMCIA_MEM_ADDR
-volatile unsigned char *pcmcia_mem = (unsigned char *) CONFIG_SYS_PCMCIA_MEM_ADDR;
-#endif
-
-int pcmcia_init (void)
-{
-	volatile pcmconf8xx_t *pcmp;
-	uint v, slota, slotb;
-
-	/*
-	 ** Enable the PCMCIA for a Flash card.
-	 */
-	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_pcmcia));
-
-#if 0
-	pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_MEM_ADDR;
-	pcmp->pcmc_por0 = 0xc00ff05d;
-#endif
-
-	/* Set all slots to zero by default. */
-	pcmp->pcmc_pgcra = 0;
-	pcmp->pcmc_pgcrb = 0;
-#ifdef PCMCIA_SLOT_A
-	pcmp->pcmc_pgcra = 0x40;
-#endif
-#ifdef PCMCIA_SLOT_B
-	pcmp->pcmc_pgcrb = 0x40;
-#endif
-
-	/* Check if any PCMCIA card is luged in. */
-	slota = (pcmp->pcmc_pipr & 0x18000000) == 0;
-	slotb = (pcmp->pcmc_pipr & 0x00001800) == 0;
-
-	if (!(slota || slotb)) {
-		printf ("No card present\n");
-#ifdef PCMCIA_SLOT_A
-		pcmp->pcmc_pgcra = 0;
-#endif
-#ifdef PCMCIA_SLOT_B
-		pcmp->pcmc_pgcrb = 0;
-#endif
-		return -1;
-	} else
-		printf ("Unknown card (");
-
-	v = 0;
-
-	switch ((pcmp->pcmc_pipr >> 14) & 3) {
-	case 0x00:
-		printf ("5V");
-		v = 5;
-		break;
-	case 0x01:
-		printf ("5V and 3V");
-		v = 3;
-		break;
-	case 0x03:
-		printf ("5V, 3V and x.xV");
-		v = 3;
-		break;
-	}
-
-	switch (v) {
-	case 3:
-		printf ("; using 3V");
-		/* Enable 3 volt Vcc. */
-
-		break;
-
-	default:
-		printf ("; unknown voltage");
-		return -1;
-	}
-	printf (")\n");
-	/* disable pcmcia reset after a while */
-
-	udelay (20);
-
-	pcmp->pcmc_pgcrb = 0;
-
-	/* If you using a real hd you should give a short
-	 * spin-up time. */
-#ifdef CONFIG_DISK_SPINUP_TIME
-	udelay (CONFIG_DISK_SPINUP_TIME);
-#endif
-
-	return 0;
-}
-#endif
diff --git a/board/genietv/u-boot.lds b/board/genietv/u-boot.lds
deleted file mode 100644
index 70ab702..0000000
--- a/board/genietv/u-boot.lds
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-    lib/built-in.o			(.text*)
-    net/built-in.o			(.text*)
-    arch/powerpc/cpu/mpc8xx/built-in.o	(.text*)
-    board/genietv/built-in.o		(.text*)
-    arch/powerpc/lib/built-in.o		(.text*)
-    *(.text.do_load_serial*)
-    *(.text.do_mem_*)
-    *(.text.do_bootm*)
-
-    . = env_offset;
-    common/env_embedded.o		(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-  }
-  . = ALIGN(256 * 1024);
-  .ppcenv	:
-  {
-    common/env_embedded.o (.ppcenv)
-  }
-  . = ALIGN(4);
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/genietv/u-boot.lds.debug b/board/genietv/u-boot.lds.debug
deleted file mode 100644
index cc8cd3a..0000000
--- a/board/genietv/u-boot.lds.debug
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    arch/powerpc/lib/ppcstring.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-    lib/zlib.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  . = ALIGN(256 * 1024);
-  .ppcenv	:
-  {
-    common/env_embedded.o (.ppcenv)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/boards.cfg b/boards.cfg
index 384f319..e411a7b 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -1252,4 +1252,3 @@ Orphan  powerpc     mpc8xx         -           -               fads
 Orphan  powerpc     mpc8xx         -           -               fads                FADS823                              -                                                                                                                                 -
 Orphan  powerpc     mpc8xx         -           -               fads                FADS850SAR                           -                                                                                                                                 -
 Orphan  powerpc     mpc8xx         -           -               fads                FADS860T                             -                                                                                                                                 -
-Orphan  powerpc     mpc8xx         -           -               genietv             GENIETV                              -                                                                                                                                 -
diff --git a/doc/README.console b/doc/README.console
index e7970ed..aadf596 100644
--- a/doc/README.console
+++ b/doc/README.console
@@ -99,4 +99,3 @@ The driver has been tested with the following configurations (see
 CREDITS for other contact informations):
 
 - MPC823FADS with AD7176 on a PAL TV (YCbYCr)	- arsenio@tin.it
-- GENIETV    with AD7177 on a PAL TV (YCbYCr)	- arsenio@tin.it
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 4e0ad32..b068544 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+genietv          powerpc     mpc8xx         -           2014-04-04
 mbx8xx           powerpc     mpc8xx         -           2014-04-04
 nx823            powerpc     mpc8xx         -           2014-04-04
 idmr             m68k        mcf52x2        ba650e9b    2014-01-28
diff --git a/doc/README.video b/doc/README.video
index f09d5f9..dadbfcd 100644
--- a/doc/README.video
+++ b/doc/README.video
@@ -11,8 +11,6 @@ U-Boot MPC8xx video controller driver
 The driver has been tested with the following configurations:
 
 - MPC823FADS with AD7176 on a PAL TV (YCbYCr)	- arsenio@tin.it
-- GENIETV    with AD7177 on a PAL TV (YCbYCr)	- arsenio@tin.it
-
 
 "video-mode" environment variable
 ===============================
diff --git a/include/commproc.h b/include/commproc.h
index 62468c3..e3bc6d6 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -704,32 +704,6 @@ typedef struct scc_enet {
 #define PD_MII_MASK	((ushort)0x1FFF)	/* PD 3-15	*/
 #endif	/* CONFIG_GEN860T */
 
-/***  GENIETV  ********************************************************/
-
-#if defined(CONFIG_GENIETV)
-/* Ethernet is only on SCC2 */
-
-#define CONFIG_SCC2_ENET
-#define	PROFF_ENET	PROFF_SCC2
-#define	CPM_CR_ENET	CPM_CR_CH_SCC2
-#define	SCC_ENET	1
-#define CPMVEC_ENET	CPMVEC_SCC2
-
-#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
-#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
-#define PA_ENET_RCLK	((ushort)0x0200)	/* PA  6 */
-
-#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
-
-#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
-#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002e00)
-
-#endif	/* CONFIG_GENIETV */
-
 /*** HERMES-PRO ******************************************************/
 
 /* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */
diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h
deleted file mode 100644
index 6a34b12..0000000
--- a/include/configs/GENIETV.h
+++ /dev/null
@@ -1,354 +0,0 @@
- /*
-  * A collection of structures, addresses, and values associated with
-  * the Motorola 860T FADS board.  Copied from the MBX stuff.
-  * Magnus Damm added defines for 8xxrom and extended bd_info.
-  * Helmut Buchsbaum added bitvalues for BCSRx
-  *
-  * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
-  */
-
-/*
- * The GENIETV is using the following physical memorymap (copied from
- * the FADS configuration):
- *
- * ff020000 -> ff02ffff : pcmcia
- * ff010000 -> ff01ffff : BCSR       connected to CS1, setup by 8xxROM
- * ff000000 -> ff00ffff : IMAP       internal in the cpu
- * 30000000 -> 300fffff : flash      connected to CS0
- * 00000000 -> nnnnnnnn : sdram      setup by U-Boot
- *
- * CS pins are connected as follows:
- *
- * CS0 -512Kb boot flash
- * CS1 - SDRAM #1
- * CS2 - SDRAM #2
- * CS3 - Flash #1
- * CS4 - Flash #2
- * CS5 - Lon (if present)
- * CS6 - PCMCIA #1
- * CS7 - PCMCIA #2
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define	CONFIG_SYS_TEXT_BASE	0x00000000
-
-#define	CONFIG_ETHADDR		08:00:22:50:70:63	/* Ethernet address */
-#define CONFIG_ENV_OVERWRITE	1	/* Overwrite the environment */
-
-#define CONFIG_SYS_ALLOC_DPRAM			/* Use dynamic DPRAM allocation */
-
-#define CONFIG_SYS_AUTOLOAD		"n"	/* No autoload */
-
-/*#define CONFIG_VIDEO		1	/  To enable the video initialization */
-/*#define CONFIG_VIDEO_ADDR	0x00200000 */
-/*#define CONFIG_HARD_I2C	1	/  I2C with hardware support */
-/*#define CONFIG_PCMCIA		1	/  To enable the PCMCIA initialization */
-
-/*#define CONFIG_SYS_PCMCIA_IO_ADDR	0xff020000 */
-/*#define CONFIG_SYS_PCMCIA_IO_SIZE	0x10000 */
-/*#define CONFIG_SYS_PCMCIA_MEM_ADDR	0xe0000000 */
-/*#define CONFIG_SYS_PCMCIA_MEM_SIZE	0x10000 */
-
-/* Video related */
-
-/*#define CONFIG_VIDEO_LOGO			1	/  Show the logo */
-/*#define CONFIG_VIDEO_ENCODER_AD7177		1	/  Enable this encoder */
-/*#define CONFIG_VIDEO_ENCODER_AD7177_ADDR	0xF4	/  ALSB to ground */
-
-/* Wireless 56Khz 4PPM keyboard on SMCx */
-
-/*#define CONFIG_KEYBOARD		0 */
-/*#define CONFIG_WL_4PPM_KEYBOARD_SMC	0	/  SMC to use (0 indexed) */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#include <mpc8xx_irq.h>
-
-#define CONFIG_GENIETV		1
-#define CONFIG_MPC823		1
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600
-
-#define MPC8XX_FACT	12			/* Multiply by 12	*/
-#define MPC8XX_XIN	5000000			/* 4 MHz clock		*/
-
-#define MPC8XX_HZ	((MPC8XX_XIN) * (MPC8XX_FACT))
-#define CONFIG_SYS_PLPRCR_MF	((MPC8XX_FACT-1) << 20)
-#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ	/* Force it - dont measure it */
-
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-
-#if 1
-#define CONFIG_BOOTDELAY	1	/* autoboot after 2 seconds	*/
-#define CONFIG_LOADS_ECHO	0	/* Dont echoes received characters */
-#define CONFIG_BOOTARGS		""
-#define CONFIG_BOOTCOMMAND							\
-"bootp; tftp; "									\
-"setenv bootargs console=tty0 console=ttyS0 "					\
-"root=/dev/nfs nfsroot=${serverip}:${rootpath} "				\
-"ip=${ipaddr}:${serverip}:${gatewayip}:${subnetmask}:${hostname}:eth0:off ;"	\
-"bootm "
-#else
-#define CONFIG_BOOTDELAY	0	/* autoboot disabled		*/
-#endif
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT		":>"		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		8		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00800000	/* 0 ... 8 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 4800, 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- * Also NOTE that it doesn't mean SDRAM - it means MEMORY.
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x02800000
-#define CONFIG_SYS_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
-#if 0
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 128 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET		0x10000	/* Offset of Environment Sector		*/
-#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector (64k)*/
-
-/* values according to the manual */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control					11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration						11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- *
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC10)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control					11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer  *
- * interrupt status bit - leave PLL multiplication factor unchanged !
- *
- * #define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
- */
-#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | CONFIG_SYS_PLPRCR_MF)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-#define CONFIG_SYS_SCCR       (SCCR_TBS     | \
-				SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-				SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-				SCCR_DFALCD00)
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER		0
-
-/* Because of the way the 860 starts up and assigns CS0 the
-* entire address space, we have to set the memory controller
-* differently.  Normally, you write the option register
-* first, and then enable the chip select by writing the
-* base register.  For CS0, you must write the base register
-* first, followed by the option register.
-*/
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0(FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x02800000	/* FLASH bank #0		*/
-
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask		*/
-#define CONFIG_SYS_PRELIM_OR_AM	0xFF800000	/* OR addr mask (512Kb) */
-
-/* FLASH timing */
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
-				OR_SCY_15_CLK | OR_TRLX )
-
-/*#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH) */
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)		/* 0xfff80ff4 */
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8)	/* 0x02800401 */
-
-/*
- * BR1/2 and OR1/2 (SDRAM)
-*/
-
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
-
-#define SDRAM_MAX_SIZE		0x04000000	/* 64Mb bank */
-#define SDRAM_BASE1_PRELIM	0x00000000	/* First bank */
-#define SDRAM_BASE2_PRELIM	0x10000000	/* Second bank */
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MBMR_PTB		0x5d		/* start with divider for 100 MHz	*/
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K        MPTPR_PTP_DIV32
-/*
- * MBMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MBMR_8COL	((CONFIG_SYS_MBMR_PTB << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
-			MAMR_G0CLA_A11 | MAMR_RLFA_1X | MAMR_WLFA_1X \
-			| MAMR_TLFA_4X)	/* 0x5d802114 */
-
-/* values according to the manual */
-
-#define CONFIG_DRAM_50MHZ		1
-#define CONFIG_SDRAM_50MHZ
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-/*
- * MPC8xx CPM Options
- */
-#define CONFIG_SCC_ENET 1
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-
-/* PCMCIA configuration */
-
-#define PCMCIA_MAX_SLOTS    1
-#define PCMCIA_SLOT_B 1
-
-#endif	/* __CONFIG_H */