powerpc: remove RPXClassic, RPXlite boards support

Enough time has passed since these boards were moved to Orphan. Remove.

 - Remove board/RPXlite/*
 - Remove board/RPXClassic/*
 - Remove include/configs/RPXlite.h
 - Remove include/configs/RPXClassic.h
 - Clean-up defined(CONFIG_RPXCLASSIC)
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

28 files changed, 8 insertions, 4108 deletions

diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c
index 69455c7..9c3102d 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -138,7 +138,6 @@ void cpu_init_f (volatile immap_t * immr)
     defined(CONFIG_MHPC)	|| \
     defined(CONFIG_R360MPI)	|| \
     defined(CONFIG_RMU)		|| \
-    defined(CONFIG_RPXCLASSIC)	|| \
     defined(CONFIG_RPXLITE)	|| \
     defined(CONFIG_SPC1920)	|| \
     defined(CONFIG_SPD823TS)
@@ -207,10 +206,6 @@ void cpu_init_f (volatile immap_t * immr)
 		__asm__ ("eieio");
 	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
 
-#ifdef CONFIG_RPXCLASSIC
-	rpxclassic_init ();
-#endif
-
 #if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM)
 	rpxlite_init ();
 #endif
diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c
index 647f058..5da6973 100644
--- a/arch/powerpc/cpu/mpc8xx/scc.c
+++ b/arch/powerpc/cpu/mpc8xx/scc.c
@@ -461,11 +461,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis)
 #error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
 #endif
 
-#ifdef CONFIG_RPXCLASSIC
-	*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
-	*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
-#endif
-
 #ifdef CONFIG_RPXLITE
 	*((uchar *) BCSR0) |= BCSR0_ETHEN;
 #endif
@@ -512,8 +507,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis)
 	 */
 #if defined (CONFIG_FADS)
 	udelay (10000);		/* wait 10 ms */
-#elif defined(CONFIG_RPXCLASSIC)
-	udelay (100000);	/* wait 100 ms */
 #endif
 
 	return 1;
diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c
index f7ca11e..9321411 100644
--- a/arch/powerpc/cpu/mpc8xx/serial.c
+++ b/arch/powerpc/cpu/mpc8xx/serial.c
@@ -182,7 +182,7 @@ static int smc_init (void)
 #endif
 #endif	/* CONFIG_FADS */
 
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
+#if defined(CONFIG_RPXLITE)
 	/* Enable Monitor Port Transceiver */
 	*((uchar *) BCSR0) |= BCSR0_ENMONXCVR ;
 #endif /* CONFIG_RPXLITE */
diff --git a/board/RPXClassic/Makefile b/board/RPXClassic/Makefile
deleted file mode 100644
index 87db754..0000000
--- a/board/RPXClassic/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= RPXClassic.o flash.o eccx.o
diff --git a/board/RPXClassic/README b/board/RPXClassic/README
deleted file mode 100644
index e03f670..0000000
--- a/board/RPXClassic/README
+++ /dev/null
@@ -1,19 +0,0 @@
-# Porting U-Boot onto RPXClassic LF_BW31 board
-# Written by Pierre AUBERT
-# E-Mail  p.aubert@staubli.com
-# Stäubli Faverges - <www.staubli.com>
-#
-# Sept. 20 2001
-#
-# Cross compile: Montavista Hardhat ported on HP-UX 10.20
-#
-
-Flash memories : AM29DL323B (2 banks flash memories) 16 Mb from 0xff000000
-DRAM : 16 Mb from 0
-NVRAM : 512 kb from 0xfa000000
-
-
-- environment is stored in NVRAM
-- Mac address is read from EEPROM
-- ethernet on SCC1 or fast ethernet on FEC are running (depending on the
-  configuration flag CONFIG_FEC_ENET)
diff --git a/board/RPXClassic/RPXClassic.c b/board/RPXClassic/RPXClassic.c
deleted file mode 100644
index 15b7232..0000000
--- a/board/RPXClassic/RPXClassic.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * (C)	Copyright 2001
- * Stäubli Faverges - <www.staubli.com>
- * Pierre AUBERT  p.aubert@staubli.com
- * U-Boot port on RPXClassic LF (CLLF_BW31) board
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <config.h>
-#include <mpc8xx.h>
-#include <net.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-static unsigned char aschex_to_byte (unsigned char *cp);
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_	0xFFFFCC25
-
-const uint sdram_table[] =
-{
-	/*
-	 * Single Read. (Offset 00h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08,
-	0x3FBFCC27, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Read. (Offset 08h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88,
-	0x3FBFCC27, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Single Write. (Offset 18h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00,
-	0x3FFFCC27, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Write. (Offset 20h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C,
-	0x0CFFCC00, 0x33FFCC27, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Refresh. (Offset 30h in UPMA RAM)
-	 */
-	0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24,
-	0x3FFFCC27, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Exception. (Offset 3Ch in UPMA RAM)
-	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	puts ("Board: RPXClassic\n");
-	return (0);
-}
-
-/*-----------------------------------------------------------------------------
- * board_get_enetaddr -- Read the MAC Address in the I2C EEPROM
- *-----------------------------------------------------------------------------
- */
-static void board_get_enetaddr(uchar *enet)
-{
-	int i;
-	char buff[256], *cp;
-
-	/* Initialize I2C					*/
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
-	/* Read 256 bytes in EEPROM				*/
-	i2c_read (0x54, 0, 1, (uchar *)buff, 128);
-	i2c_read (0x54, 128, 1, (uchar *)buff + 128, 128);
-
-	/* Retrieve MAC address in buffer (key EA)		*/
-	for (cp = buff;;) {
-		if (cp[0] == 'E' && cp[1] == 'A') {
-			cp += 3;
-			/* Read MAC address			*/
-			for (i = 0; i < 6; i++, cp += 2) {
-				enet[i] = aschex_to_byte ((unsigned char *)cp);
-			}
-		}
-		/* Scan to the end of the record		*/
-		while ((*cp != '\n') && (*cp != (char)0xff)) {
-			cp++;
-		}
-		/* If the next character is a \n, 0 or ff, we are done.	*/
-		cp++;
-		if ((*cp == '\n') || (*cp == 0) || (*cp == (char)0xff))
-			break;
-	}
-
-#ifdef CONFIG_FEC_ENET
-	/* The MAC address is the same as normal ethernet except the 3rd byte	 */
-	/* (See the E.P. Planet Core Overview manual		*/
-	enet[3] |= 0x80;
-#endif
-
-	printf("MAC address = %pM\n", enet);
-}
-
-int misc_init_r(void)
-{
-	uchar enetaddr[6];
-
-	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-		board_get_enetaddr(enetaddr);
-		eth_setenv_enetaddr("ethaddr", enetaddr);
-	}
-
-	return 0;
-}
-
-void rpxclassic_init (void)
-{
-	/* Enable NVRAM */
-	*((uchar *) BCSR0) |= BCSR0_ENNVRAM;
-
-#ifdef CONFIG_FEC_ENET
-
-	/* Validate the fast ethernet tranceiver                             */
-	*((volatile uchar *) BCSR2) &= ~BCSR2_MIICTL;
-	*((volatile uchar *) BCSR2) &= ~BCSR2_MIIPWRDWN;
-	*((volatile uchar *) BCSR2) |= BCSR2_MIIRST;
-	*((volatile uchar *) BCSR2) |= BCSR2_MIIPWRDWN;
-#endif
-
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size10;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-			   sizeof (sdram_table) / sizeof (uint));
-
-	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	memctl->memc_mar = 0x00000000;
-
-	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80002230;	/* SDRAM bank 0 - refresh twice */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
-	udelay (1000);
-
-	/* Check Bank 0 Memory Size
-	 * try 10 column mode
-	 */
-
-	size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM,
-						SDRAM_MAX_SIZE);
-
-	return (size10);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base, long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size(base, maxsize));
-}
-/*-----------------------------------------------------------------------------
- * aschex_to_byte --
- *-----------------------------------------------------------------------------
- */
-static unsigned char aschex_to_byte (unsigned char *cp)
-{
-	u_char byte, c;
-
-	c = *cp++;
-
-	if ((c >= 'A') && (c <= 'F')) {
-		c -= 'A';
-		c += 10;
-	} else if ((c >= 'a') && (c <= 'f')) {
-		c -= 'a';
-		c += 10;
-	} else {
-		c -= '0';
-	}
-
-	byte = c * 16;
-
-	c = *cp;
-
-	if ((c >= 'A') && (c <= 'F')) {
-		c -= 'A';
-		c += 10;
-	} else if ((c >= 'a') && (c <= 'f')) {
-		c -= 'a';
-		c += 10;
-	} else {
-		c -= '0';
-	}
-
-	byte += c;
-
-	return (byte);
-}
diff --git a/board/RPXClassic/eccx.c b/board/RPXClassic/eccx.c
deleted file mode 100644
index 766a19e..0000000
--- a/board/RPXClassic/eccx.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
- * Pierre AUBERT  p.aubert@staubli.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-/* Video support for the ECCX daughter board                                 */
-
-
-#include <common.h>
-#include <config.h>
-
-#ifdef CONFIG_VIDEO_SED13806
-#include <sed13806.h>
-
-
-/* Screen configurations: the initialization of the SD13806 depends on
-   screen and on display mode. We handle only 8bpp and 16 bpp modes          */
-
-/* ECCX board is supplied with a NEC NL6448BC20 screen                       */
-#ifdef CONFIG_NEC_NL6448BC20
-#define DISPLAY_WIDTH   640
-#define DISPLAY_HEIGHT  480
-
-#ifdef CONFIG_VIDEO_SED13806_8BPP
-static const S1D_REGS init_regs [] =
-{
-    {0x0001,0x00},   /* Miscellaneous Register */
-    {0x01FC,0x00},   /* Display Mode Register */
-    {0x0004,0x1b},   /* General IO Pins Configuration Register 0 */
-    {0x0005,0x00},   /* General IO Pins Configuration Register 1 */
-    {0x0008,0xe5},   /* General IO Pins Control Register 0 */
-    {0x0009,0x1f},   /* General IO Pins Control Register 1 */
-    {0x0010,0x02},   /* Memory Clock Configuration Register */
-    {0x0014,0x10},   /* LCD Pixel Clock Configuration Register */
-    {0x0018,0x02},   /* CRT/TV Pixel Clock Configuration Register */
-    {0x001C,0x02},   /* MediaPlug Clock Configuration Register */
-    {0x001E,0x01},   /* CPU To Memory Wait State Select Register */
-    {0x0021,0x04},   /* DRAM Refresh Rate Register */
-    {0x002A,0x00},   /* DRAM Timings Control Register 0 */
-    {0x002B,0x01},   /* DRAM Timings Control Register 1 */
-    {0x0020,0x80},   /* Memory Configuration Register */
-    {0x0030,0x25},   /* Panel Type Register */
-    {0x0031,0x00},   /* MOD Rate Register */
-    {0x0032,0x4F},   /* LCD Horizontal Display Width Register */
-    {0x0034,0x13},   /* LCD Horizontal Non-Display Period Register */
-    {0x0035,0x01},   /* TFT FPLINE Start Position Register */
-    {0x0036,0x0B},   /* TFT FPLINE Pulse Width Register */
-    {0x0038,0xDF},   /* LCD Vertical Display Height Register 0 */
-    {0x0039,0x01},   /* LCD Vertical Display Height Register 1 */
-    {0x003A,0x2C},   /* LCD Vertical Non-Display Period Register */
-    {0x003B,0x00},   /* TFT FPFRAME Start Position Register */
-    {0x003C,0x01},   /* TFT FPFRAME Pulse Width Register */
-    {0x0040,0x03},   /* LCD Display Mode Register */
-    {0x0041,0x02},   /* LCD Miscellaneous Register */
-    {0x0042,0x00},   /* LCD Display Start Address Register 0 */
-    {0x0043,0x00},   /* LCD Display Start Address Register 1 */
-    {0x0044,0x00},   /* LCD Display Start Address Register 2 */
-    {0x0046,0x40},   /* LCD Memory Address Offset Register 0 */
-    {0x0047,0x01},   /* LCD Memory Address Offset Register 1 */
-    {0x0048,0x00},   /* LCD Pixel Panning Register */
-    {0x004A,0x00},   /* LCD Display FIFO High Threshold Control Register */
-    {0x004B,0x00},   /* LCD Display FIFO Low Threshold Control Register */
-    {0x0050,0x4F},   /* CRT/TV Horizontal Display Width Register */
-    {0x0052,0x13},   /* CRT/TV Horizontal Non-Display Period Register */
-    {0x0053,0x01},   /* CRT/TV HRTC Start Position Register */
-    {0x0054,0x0B},   /* CRT/TV HRTC Pulse Width Register */
-    {0x0056,0xDF},   /* CRT/TV Vertical Display Height Register 0 */
-    {0x0057,0x01},   /* CRT/TV Vertical Display Height Register 1 */
-    {0x0058,0x2B},   /* CRT/TV Vertical Non-Display Period Register */
-    {0x0059,0x09},   /* CRT/TV VRTC Start Position Register */
-    {0x005A,0x01},   /* CRT/TV VRTC Pulse Width Register */
-    {0x005B,0x00},   /* TV Output Control Register */
-    {0x0060,0x03},   /* CRT/TV Display Mode Register */
-    {0x0062,0x00},   /* CRT/TV Display Start Address Register 0 */
-    {0x0063,0x00},   /* CRT/TV Display Start Address Register 1 */
-    {0x0064,0x00},   /* CRT/TV Display Start Address Register 2 */
-    {0x0066,0x40},   /* CRT/TV Memory Address Offset Register 0 */
-    {0x0067,0x01},   /* CRT/TV Memory Address Offset Register 1 */
-    {0x0068,0x00},   /* CRT/TV Pixel Panning Register */
-    {0x006A,0x00},   /* CRT/TV Display FIFO High Threshold Control Register */
-    {0x006B,0x00},   /* CRT/TV Display FIFO Low Threshold Control Register */
-    {0x0070,0x00},   /* LCD Ink/Cursor Control Register */
-    {0x0071,0x00},   /* LCD Ink/Cursor Start Address Register */
-    {0x0072,0x00},   /* LCD Cursor X Position Register 0 */
-    {0x0073,0x00},   /* LCD Cursor X Position Register 1 */
-    {0x0074,0x00},   /* LCD Cursor Y Position Register 0 */
-    {0x0075,0x00},   /* LCD Cursor Y Position Register 1 */
-    {0x0076,0x00},   /* LCD Ink/Cursor Blue Color 0 Register */
-    {0x0077,0x00},   /* LCD Ink/Cursor Green Color 0 Register */
-    {0x0078,0x00},   /* LCD Ink/Cursor Red Color 0 Register */
-    {0x007A,0x1F},   /* LCD Ink/Cursor Blue Color 1 Register */
-    {0x007B,0x3F},   /* LCD Ink/Cursor Green Color 1 Register */
-    {0x007C,0x1F},   /* LCD Ink/Cursor Red Color 1 Register */
-    {0x007E,0x00},   /* LCD Ink/Cursor FIFO Threshold Register */
-    {0x0080,0x00},   /* CRT/TV Ink/Cursor Control Register */
-    {0x0081,0x00},   /* CRT/TV Ink/Cursor Start Address Register */
-    {0x0082,0x00},   /* CRT/TV Cursor X Position Register 0 */
-    {0x0083,0x00},   /* CRT/TV Cursor X Position Register 1 */
-    {0x0084,0x00},   /* CRT/TV Cursor Y Position Register 0 */
-    {0x0085,0x00},   /* CRT/TV Cursor Y Position Register 1 */
-    {0x0086,0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register */
-    {0x0087,0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register */
-    {0x0088,0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register */
-    {0x008A,0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register */
-    {0x008B,0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register */
-    {0x008C,0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register */
-    {0x008E,0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register */
-    {0x0100,0x00},   /* BitBlt Control Register 0 */
-    {0x0101,0x00},   /* BitBlt Control Register 1 */
-    {0x0102,0x00},   /* BitBlt ROP Code/Color Expansion Register */
-    {0x0103,0x00},   /* BitBlt Operation Register */
-    {0x0104,0x00},   /* BitBlt Source Start Address Register 0 */
-    {0x0105,0x00},   /* BitBlt Source Start Address Register 1 */
-    {0x0106,0x00},   /* BitBlt Source Start Address Register 2 */
-    {0x0108,0x00},   /* BitBlt Destination Start Address Register 0 */
-    {0x0109,0x00},   /* BitBlt Destination Start Address Register 1 */
-    {0x010A,0x00},   /* BitBlt Destination Start Address Register 2 */
-    {0x010C,0x00},   /* BitBlt Memory Address Offset Register 0 */
-    {0x010D,0x00},   /* BitBlt Memory Address Offset Register 1 */
-    {0x0110,0x00},   /* BitBlt Width Register 0 */
-    {0x0111,0x00},   /* BitBlt Width Register 1 */
-    {0x0112,0x00},   /* BitBlt Height Register 0 */
-    {0x0113,0x00},   /* BitBlt Height Register 1 */
-    {0x0114,0x00},   /* BitBlt Background Color Register 0 */
-    {0x0115,0x00},   /* BitBlt Background Color Register 1 */
-    {0x0118,0x00},   /* BitBlt Foreground Color Register 0 */
-    {0x0119,0x00},   /* BitBlt Foreground Color Register 1 */
-    {0x01E0,0x00},   /* Look-Up Table Mode Register */
-    {0x01E2,0x00},   /* Look-Up Table Address Register */
-    {0x01E4,0x00},   /* Look-Up Table Data Register */
-    {0x01F0,0x10},   /* Power Save Configuration Register */
-    {0x01F1,0x00},   /* Power Save Status Register */
-    {0x01F4,0x00},   /* CPU-to-Memory Access Watchdog Timer Register */
-    {0x01FC,0x01},   /* Display Mode Register */
-    {0, 0}
-};
-#endif /* CONFIG_VIDEO_SED13806_8BPP */
-
-#ifdef CONFIG_VIDEO_SED13806_16BPP
-
-static const S1D_REGS init_regs [] =
-{
-    {0x0001,0x00},   /* Miscellaneous Register */
-    {0x01FC,0x00},   /* Display Mode Register */
-    {0x0004,0x1b},   /* General IO Pins Configuration Register 0 */
-    {0x0005,0x00},   /* General IO Pins Configuration Register 1 */
-    {0x0008,0xe5},   /* General IO Pins Control Register 0 */
-    {0x0009,0x1f},   /* General IO Pins Control Register 1 */
-    {0x0010,0x02},   /* Memory Clock Configuration Register */
-    {0x0014,0x10},   /* LCD Pixel Clock Configuration Register */
-    {0x0018,0x02},   /* CRT/TV Pixel Clock Configuration Register */
-    {0x001C,0x02},   /* MediaPlug Clock Configuration Register */
-    {0x001E,0x01},   /* CPU To Memory Wait State Select Register */
-    {0x0021,0x04},   /* DRAM Refresh Rate Register */
-    {0x002A,0x00},   /* DRAM Timings Control Register 0 */
-    {0x002B,0x01},   /* DRAM Timings Control Register 1 */
-    {0x0020,0x80},   /* Memory Configuration Register */
-    {0x0030,0x25},   /* Panel Type Register */
-    {0x0031,0x00},   /* MOD Rate Register */
-    {0x0032,0x4F},   /* LCD Horizontal Display Width Register */
-    {0x0034,0x13},   /* LCD Horizontal Non-Display Period Register */
-    {0x0035,0x01},   /* TFT FPLINE Start Position Register */
-    {0x0036,0x0B},   /* TFT FPLINE Pulse Width Register */
-    {0x0038,0xDF},   /* LCD Vertical Display Height Register 0 */
-    {0x0039,0x01},   /* LCD Vertical Display Height Register 1 */
-    {0x003A,0x2C},   /* LCD Vertical Non-Display Period Register */
-    {0x003B,0x00},   /* TFT FPFRAME Start Position Register */
-    {0x003C,0x01},   /* TFT FPFRAME Pulse Width Register */
-    {0x0040,0x05},   /* LCD Display Mode Register */
-    {0x0041,0x02},   /* LCD Miscellaneous Register */
-    {0x0042,0x00},   /* LCD Display Start Address Register 0 */
-    {0x0043,0x00},   /* LCD Display Start Address Register 1 */
-    {0x0044,0x00},   /* LCD Display Start Address Register 2 */
-    {0x0046,0x80},   /* LCD Memory Address Offset Register 0 */
-    {0x0047,0x02},   /* LCD Memory Address Offset Register 1 */
-    {0x0048,0x00},   /* LCD Pixel Panning Register */
-    {0x004A,0x00},   /* LCD Display FIFO High Threshold Control Register */
-    {0x004B,0x00},   /* LCD Display FIFO Low Threshold Control Register */
-    {0x0050,0x4F},   /* CRT/TV Horizontal Display Width Register */
-    {0x0052,0x13},   /* CRT/TV Horizontal Non-Display Period Register */
-    {0x0053,0x01},   /* CRT/TV HRTC Start Position Register */
-    {0x0054,0x0B},   /* CRT/TV HRTC Pulse Width Register */
-    {0x0056,0xDF},   /* CRT/TV Vertical Display Height Register 0 */
-    {0x0057,0x01},   /* CRT/TV Vertical Display Height Register 1 */
-    {0x0058,0x2B},   /* CRT/TV Vertical Non-Display Period Register */
-    {0x0059,0x09},   /* CRT/TV VRTC Start Position Register */
-    {0x005A,0x01},   /* CRT/TV VRTC Pulse Width Register */
-    {0x005B,0x00},   /* TV Output Control Register */
-    {0x0060,0x05},   /* CRT/TV Display Mode Register */
-    {0x0062,0x00},   /* CRT/TV Display Start Address Register 0 */
-    {0x0063,0x00},   /* CRT/TV Display Start Address Register 1 */
-    {0x0064,0x00},   /* CRT/TV Display Start Address Register 2 */
-    {0x0066,0x80},   /* CRT/TV Memory Address Offset Register 0 */
-    {0x0067,0x02},   /* CRT/TV Memory Address Offset Register 1 */
-    {0x0068,0x00},   /* CRT/TV Pixel Panning Register */
-    {0x006A,0x00},   /* CRT/TV Display FIFO High Threshold Control Register */
-    {0x006B,0x00},   /* CRT/TV Display FIFO Low Threshold Control Register */
-    {0x0070,0x00},   /* LCD Ink/Cursor Control Register */
-    {0x0071,0x00},   /* LCD Ink/Cursor Start Address Register */
-    {0x0072,0x00},   /* LCD Cursor X Position Register 0 */
-    {0x0073,0x00},   /* LCD Cursor X Position Register 1 */
-    {0x0074,0x00},   /* LCD Cursor Y Position Register 0 */
-    {0x0075,0x00},   /* LCD Cursor Y Position Register 1 */
-    {0x0076,0x00},   /* LCD Ink/Cursor Blue Color 0 Register */
-    {0x0077,0x00},   /* LCD Ink/Cursor Green Color 0 Register */
-    {0x0078,0x00},   /* LCD Ink/Cursor Red Color 0 Register */
-    {0x007A,0x1F},   /* LCD Ink/Cursor Blue Color 1 Register */
-    {0x007B,0x3F},   /* LCD Ink/Cursor Green Color 1 Register */
-    {0x007C,0x1F},   /* LCD Ink/Cursor Red Color 1 Register */
-    {0x007E,0x00},   /* LCD Ink/Cursor FIFO Threshold Register */
-    {0x0080,0x00},   /* CRT/TV Ink/Cursor Control Register */
-    {0x0081,0x00},   /* CRT/TV Ink/Cursor Start Address Register */
-    {0x0082,0x00},   /* CRT/TV Cursor X Position Register 0 */
-    {0x0083,0x00},   /* CRT/TV Cursor X Position Register 1 */
-    {0x0084,0x00},   /* CRT/TV Cursor Y Position Register 0 */
-    {0x0085,0x00},   /* CRT/TV Cursor Y Position Register 1 */
-    {0x0086,0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register */
-    {0x0087,0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register */
-    {0x0088,0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register */
-    {0x008A,0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register */
-    {0x008B,0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register */
-    {0x008C,0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register */
-    {0x008E,0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register */
-    {0x0100,0x00},   /* BitBlt Control Register 0 */
-    {0x0101,0x00},   /* BitBlt Control Register 1 */
-    {0x0102,0x00},   /* BitBlt ROP Code/Color Expansion Register */
-    {0x0103,0x00},   /* BitBlt Operation Register */
-    {0x0104,0x00},   /* BitBlt Source Start Address Register 0 */
-    {0x0105,0x00},   /* BitBlt Source Start Address Register 1 */
-    {0x0106,0x00},   /* BitBlt Source Start Address Register 2 */
-    {0x0108,0x00},   /* BitBlt Destination Start Address Register 0 */
-    {0x0109,0x00},   /* BitBlt Destination Start Address Register 1 */
-    {0x010A,0x00},   /* BitBlt Destination Start Address Register 2 */
-    {0x010C,0x00},   /* BitBlt Memory Address Offset Register 0 */
-    {0x010D,0x00},   /* BitBlt Memory Address Offset Register 1 */
-    {0x0110,0x00},   /* BitBlt Width Register 0 */
-    {0x0111,0x00},   /* BitBlt Width Register 1 */
-    {0x0112,0x00},   /* BitBlt Height Register 0 */
-    {0x0113,0x00},   /* BitBlt Height Register 1 */
-    {0x0114,0x00},   /* BitBlt Background Color Register 0 */
-    {0x0115,0x00},   /* BitBlt Background Color Register 1 */
-    {0x0118,0x00},   /* BitBlt Foreground Color Register 0 */
-    {0x0119,0x00},   /* BitBlt Foreground Color Register 1 */
-    {0x01E0,0x01},   /* Look-Up Table Mode Register */
-    {0x01E2,0x00},   /* Look-Up Table Address Register */
-    {0x01E4,0x00},   /* Look-Up Table Data Register */
-    {0x01F0,0x10},   /* Power Save Configuration Register */
-    {0x01F1,0x00},   /* Power Save Status Register */
-    {0x01F4,0x00},   /* CPU-to-Memory Access Watchdog Timer Register */
-    {0x01FC,0x01},   /* Display Mode Register */
-    {0, 0}
-};
-
-#endif /* CONFIG_VIDEO_SED13806_16BPP */
-#endif /* CONFIG_NEC_NL6448BC20 */
-
-
-#ifdef CONFIG_CONSOLE_EXTRA_INFO
-
-/*-----------------------------------------------------------------------------
- * video_get_info_str -- setup a board string: type, speed, etc.
- * line_number= location to place info string beside logo
- * info= buffer for info string
- *-----------------------------------------------------------------------------
- */
-void video_get_info_str (int line_number, char *info)
-{
-    if (line_number == 1) {
-	strcpy (info, " RPXClassic board");
-    }
-    else {
-	info [0] = '\0';
-    }
-
-}
-#endif
-
-/*-----------------------------------------------------------------------------
- * board_video_init -- init de l'EPSON, config du CS
- *-----------------------------------------------------------------------------
- */
-unsigned int board_video_init (void)
-{
-    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-    volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-    /* Program ECCX registers                                                */
-    *(ECCX_CSR12) |= ECCX_860;
-    *(ECCX_CSR8) |= ECCX_BE | ECCX_CS2;
-    *(ECCX_CSR8) |= ECCX_ENEPSON;
-
-    memctl->memc_or2 = SED13806_OR;
-    memctl->memc_br2 = SED13806_REG_ADDR | SED13806_ACCES;
-
-    return (SED13806_REG_ADDR);
-}
-
-/*-----------------------------------------------------------------------------
- * board_validate_screen --
- *-----------------------------------------------------------------------------
- */
-void board_validate_screen (unsigned int base)
-{
-    /* Activate the panel bias power                                         */
-    *(volatile unsigned char *)(base + REG_GPIO_CTRL) = 0x80;
-}
-/*-----------------------------------------------------------------------------
- * board_get_regs --
- *-----------------------------------------------------------------------------
- */
-const S1D_REGS *board_get_regs (void)
-{
-    return (init_regs);
-}
-/*-----------------------------------------------------------------------------
- * board_get_width --
- *-----------------------------------------------------------------------------
- */
-int board_get_width (void)
-{
-    return (DISPLAY_WIDTH);
-}
-
-/*-----------------------------------------------------------------------------
- * board_get_height --
- *-----------------------------------------------------------------------------
- */
-int board_get_height (void)
-{
-    return (DISPLAY_HEIGHT);
-}
-
-#endif /* CONFIG_VIDEO_SED13806 */
diff --git a/board/RPXClassic/flash.c b/board/RPXClassic/flash.c
deleted file mode 100644
index 97ffa68..0000000
--- a/board/RPXClassic/flash.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * (C)  Copyright 2001
- * Stäubli Faverges - <www.staubli.com>
- * Pierre AUBERT  p.aubert@staubli.com
- * U-Boot port on RPXClassic LF (CLLF_BW31) board
- *
- * RPXClassic uses Am29DL323B flash memory with 2 banks
- *
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0 ;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-
-	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-	flash_info[0].size = size_b0;
-
-	return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x00010000;
-		info->start[3] = base + 0x00018000;
-		info->start[4] = base + 0x00020000;
-		info->start[5] = base + 0x00028000;
-		info->start[6] = base + 0x00030000;
-		info->start[7] = base + 0x00038000;
-		for (i = 8; i < info->sector_count; i++) {
-			info->start[i] = base + ((i-7) * 0x00040000) ;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMDL323B:
-	    printf ("AMDL323DB (16 Mbytes, bottom boot sect)\n");
-	    break;
-	default:
-	    printf ("Unknown Chip Type\n");
-	    break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-	/* Reset flash componeny                                             */
-	addr [0] = 0xf0f0f0f0;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0xAAA] = 0xAAAAAAAA ;
-	addr[0x555] = 0x55555555 ;
-	addr[0xAAA] = 0x90909090 ;
-
-	value = addr[0] ;
-
-	switch (value & 0x00FF00FF) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[2] ;		/* device ID		*/
-
-	switch (value & 0x00FF00FF) {
-	case (AMD_ID_DL323B & 0x00FF00FF):
-	    info->flash_id += FLASH_AMDL323B;
-	    info->sector_count = 71;
-	    info->size = 0x01000000;            /* 16 Mb                     */
-
-	    break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-	/* set up sector start address table */
-	/* set sector offsets for bottom boot block type	*/
-	info->start[0] = base + 0x00000000;
-	info->start[1] = base + 0x00008000;
-	info->start[2] = base + 0x00010000;
-	info->start[3] = base + 0x00018000;
-	info->start[4] = base + 0x00020000;
-	info->start[5] = base + 0x00028000;
-	info->start[6] = base + 0x00030000;
-	info->start[7] = base + 0x00038000;
-	for (i = 8; i < info->sector_count; i++) {
-	    info->start[i] = base + ((i-7) * 0x00040000) ;
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < 23; i++) {
-	    /* read sector protection at sector address, (A7 .. A0) = 0x02 */
-	    /* D0 = 1 if protected */
-	    addr = (volatile unsigned long *)(info->start[i]);
-	    info->protect[i] = addr[4] & 1 ;
-	}
-	/* Check for protected sectors in the 2nd bank                       */
-	addr[0x100AAA] = 0xAAAAAAAA ;
-	addr[0x100555] = 0x55555555 ;
-	addr[0x100AAA] = 0x90909090 ;
-
-	for (i = 23; i < info->sector_count; i++) {
-	    /* read sector protection at sector address, (A7 .. A0) = 0x02 */
-	    /* D0 = 1 if protected */
-	    addr = (volatile unsigned long *)(info->start[i]);
-	    info->protect[i] = addr[4] & 1 ;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (volatile unsigned long *)info->start[0];
-
-		*addr = 0xF0F0F0F0;	/* reset bank 1                      */
-		addr = (volatile unsigned long *)info->start[23];
-
-		*addr = 0xF0F0F0F0;	/* reset bank 2                      */
-
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-	addr[0xAAA] = 0x80808080;
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long *)(info->start[sect]) ;
-			addr[0] = 0x30303030 ;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (vu_long *)(info->start[l_sect]);
-	while ((addr[0] & 0x80808080) != 0x80808080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (vu_long *)info->start[0];
-	addr[0] = 0xF0F0F0F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long *)(info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-	addr[0xAAA] = 0xA0A0A0A0;
-
-	*((vu_long *)dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds
deleted file mode 100644
index 0eb2fba..0000000
--- a/board/RPXClassic/u-boot.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug
deleted file mode 100644
index b9c84c7..0000000
--- a/board/RPXClassic/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/RPXlite/Makefile b/board/RPXlite/Makefile
deleted file mode 100644
index c17cbac..0000000
--- a/board/RPXlite/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= RPXlite.o flash.o
diff --git a/board/RPXlite/README b/board/RPXlite/README
deleted file mode 100644
index 3ca6711..0000000
--- a/board/RPXlite/README
+++ /dev/null
@@ -1,877 +0,0 @@
-# Porting U-Boot onto RPXlite board
-# Written by Yoo. Jonghoon
-# E-Mail : yooth@ipone.co.kr
-# IP ONE Inc.
-
-# Since 2001. 1. 29
-
-# Shell : bash
-# Cross-compile tools : Montavista Hardhat
-# Debugging tools : Windriver VisionProbe (PowerPC BDM)
-# ppcboot ver. : ppcboot-0.8.1
-
-###############################################################
-#	1. Hardware setting
-###############################################################
-
-1.1. Board, BDM settings
-	Install board, BDM, connect each other
-
-1.2. Save Register value
-	Boot with board-on monitor program and save the
-	register values with BDM.
-
-1.3. Configure flash programmer
-	Check flash memory area in the memory map.
-	0xFFC00000 - 0xFFFFFFFF
-
-	Boot monitor program is at
-	0xFFF00000
-
-	You can program on-board flash memory with VisionClick
-	flash programmer. Set the target flash device as:
-
-	29DL800B
-
-	(?) The flash memory device in the board *is* 29LV800B,
-		but I cannot program it with '29LV800B' option.
-		(in VisionClick flash programming tools)
-		I don't know why...
-
-1.4. Save boot monitor program *IMPORTANT*
-	Upload boot monitor program from board to file.
-	boot monitor program starts at 0xFFF00000
-
-1.5. Test flash memory programming
-	Try to erase boot program in the flash memory,
-	and re-write them.
-	*WARNING* YOU MUST SAVE BOOT PROGRAM TO FILE
-		BEFORE ERASING FLASH
-
-###############################################################
-#	2. U-Boot setting
-###############################################################
-
-2.1. Download U-Boot tarball at
-	ftp://ftp.denx.de
-	(The latest version is ppcboot-0.8.1.tar.bz2)
-
-	To extract the archive use the following syntax :
-	> bzip2 -cd ppcboot-0.8.1.tar.bz2 | tar xf -
-
-2.2. Add the following lines in '.profile'
-	export PATH=$PATH:/opt/hardhat/devkit/ppc/8xx/bin
-
-2.3. Make board specific config, for example:
-	> cd ppcboot-0.8.1
-	> make TQM860L_config
-
-	Now we can build ppcboot bin files.
-	After make all, you must see these files in your
-	ppcboot root directory.
-
-	ppcboot
-	ppcboot.bin
-	ppcboot.srec
-	ppcboot.map
-
-2.4. Make your own board directory into the
-	ppcboot-0.8.1/board
-	and make your board-specific files here.
-
-	For exmanple, tqm8xx files are composed of
-	.depend : Nothing
-	Makefile : To make config file
-	config.mk : Sets base address
-	flash.c : Flash memory control files
-	ppcboot.lds : linker(ld) script? (I don't know this yet)
-	tqm8xx.c : DRAM control and board check routines
-
-	And, add your board config lines in the
-	ppcboot-0.8.1/Makefile
-
-	Finally, add config_(your board).h file in the
-	ppcboot-0.8.1/include/
-
-	I've made board/rpxlite directory, and just copied
-	tqm8xx settings for now.
-
-	Rebuild ppcboot for rpxlite board:
-	> make rpxlite_config
-	> make
-
-###############################################################
-#	3. U-Boot porting
-###############################################################
-
-3.1. My RPXlite files are based on tqm8xx board files.
-	> cd board
-	> cp -r tqm8xx RPXLITE
-	> cd RPXLITE
-	> mv tqm8xx.c RPXLITE.c
-	> cd ../../include
-	> cp config_tqm8xx.h config_RPXLITE.h
-
-3.2. Modified files are:
-	board/RPXLITE/RPXLITE.c		/* DRAM-related routines */
-	board/RPXLITE/flash.c		/* flash-related routines */
-	board/RPXLITE/config.mk		/* set text base address */
-	arch/powerpc/cpu/mpc8xx/serial.c /* board specific register setting */
-	include/config_RPXLITE.h	/* board specific registers */
-
-	See 'reg_config.txt' for register values in detail.
-
-###############################################################
-#	4. Running Linux
-###############################################################
-
-
-###############################################################
-#	Misc Information
-###############################################################
-
-mem_config.txt:
-===============
-
-Flash memory device : AM29LV800BB (1Mx8Bit) x 4 device
-manufacturer id : 01     (AMD)
-device id       : 5B     (AM29LV800B)
-size            : 4Mbyte
-sector #        : 19
-
-Sector information :
-
-number   start addr.     size
-00       FFC0_0000       64
-01       FFC1_0000       32
-02       FFC1_8000       32
-03       FFC2_0000       128
-04       FFC4_0000       256
-05       FFC8_0000       256
-06       FFCC_0000       256
-07       FFD0_0000       256
-08       FFD4_0000       256
-09       FFD8_0000       256
-10       FFDC_0000       256
-11       FFE0_0000       256
-12       FFE4_0000       256
-13       FFE8_0000       256
-14       FFEC_0000       256
-15       FFF0_0000       256
-16       FFF4_0000       256
-17       FFF8_0000       256
-18       FFFC_0000       256
-
-
-reg_config.txt:
-===============
-
-
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
-/*	SIU (System Interface Unit) */
-/* */
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
-
-
-/*### IMMR */
-/*### Internal Memory Map Register */
-/*### Chap. 11.4.1 */
-
-	ISB		= 0xFA20		/* Set the Immap base = 0xFA20 0000 */
-	PARTNUM = 0x21
-	MASKNUM = 0x00
-
-	=> 0xFA20 2100
-
----------------------------------------------------------------------
-
-/*### SIUMCR */
-/*### SIU Module Configuration Register */
-/*### Chap. 11.4.2 */
-/*### Offset : 0x0000 0000 */
-
-	EARB	= 0
-	EARP	= 0
-	DSHW	= 0
-	DBGC	= 0
-	DBPC	= 0
-	FRC		= 0
-	DLK		= 0
-	OPAR	= 0
-	PNCS	= 0
-	DPC		= 0
-	MPRE	= 0
-	MLRC	= 10		/* ~KR/~RETRY/~IRQ4/SPKROUT functions as ~KR/~TRTRY */
-	AEME	= 0
-	SEME	= 0
-	BSC		= 0
-	GB5E	= 0
-	B2DD	= 0
-	B3DD	= 0
-
-	=> 0x0000 0800
-
----------------------------------------------------------------------
-
-/*### SYPCR */
-/*### System Protection Control Register */
-/*### Chap. 11.4.3 */
-/*### Offset : 0x0000 0004 */
-
-	SWTC	= 0xFFFF	/* SW watchdog timer count = 0xFFFF */
-	BMT		= 0x06		/* BUS monitoring timing */
-	BME		= 1			/* BUS monitor enable */
-	SWF		= 1
-	SWE		= 0			/* SW watchdog disable */
-	SWRI	= 0
-	SWP		= 1
-
-	=> 0xFFFF 0689
-
----------------------------------------------------------------------
-
-/*### TESR */
-/*### Transfer Error Status Register */
-/*### Chap. 11.4.4 */
-/*### Offset : 0x0000 0020 */
-
-	IEXT	= 0
-	ITMT	= 0
-	IPB		= 0000
-	DEXT	= 0
-	DTMT	= 0
-	DPB		= 0000
-
-	=> 0x0000 0000
-
----------------------------------------------------------------------
-
-/*### SIPEND */
-/*### SIU Interrupt Pending Register */
-/*### Chap. 11.5.4.1 */
-/*### Offset : 0x0000 0010 */
-
-	IRQ0~IRQ7 = 0
-	LVL0~LVL7 = 0
-
-	=> 0x0000 0000
-
----------------------------------------------------------------------
-
-/*### SIMASK */
-/*### SIU Interrupt Mask Register */
-/*### Chap. 11.5.4.2 */
-/*### Offset : 0x0000 0014 */
-
-	IRM0~IRM7 = 0		/* Mask all interrupts */
-	LVL0~LVL7 = 0
-
-	=> 0x0000 0000
-
----------------------------------------------------------------------
-
-/*### SIEL */
-/*### SIU Interrupt Edge/Level Register */
-/*### Chap. 11.5.4.3 */
-/*### Offset : 0x0000 0018 */
-
-	ED0~ED7 = 0			/* Low level triggered */
-	WMn0~WMn7 = 0		/* Not allowed to exit from low-power mode */
-
-	=> 0x0000 0000
-
----------------------------------------------------------------------
-
-/*### SIVEC */
-/*### SIU Interrupt Vector Register */
-/*### Chap. 11.5.4.4 */
-/*### Offset : 0x0000 001C */
-
-	INTC = 3C		/* The lowest interrupt is pending..(?) */
-
-	=> 0x3C00 0000
-
----------------------------------------------------------------------
-
-/*### SWSR */
-/*### Software Service Register */
-/*### Chap. 11.7.1 */
-/*### Offset : 0x0000 001E */
-
-	SEQ = 0
-
-	=> 0x0000
-
----------------------------------------------------------------------
-
-/*### SDCR */
-/*### SDMA Configuration Register */
-/*### Chap. 20.2.1 */
-/*### Offset : 0x0000 0032 */
-
-	FRZ = 0
-	RAID = 01	/* Priority level 5 (BR5) (normal operation) */
-
-	=> 0x0000 0001
-
-
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
-/*	UPMA (User Programmable Machine A) */
-/* */
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
-
-/*### Chap. 16.6.4.1 */
-/*### Offset = 0x0000 017c */
-
-	T0  = CFFF CC24		/* Single Read */
-	T1  = 0FFF CC04
-	T2  = 0CAF CC04
-	T3  = 03AF CC08
-	T4  = 3FBF CC27		/* last */
-	T5  = FFFF CC25
-	T6  = FFFF CC25
-	T7  = FFFF CC25
-	T8  = CFFF CC24		/* Burst Read */
-	T9  = 0FFF CC04
-	T10 = 0CAF CC84
-	T11 = 03AF CC88
-	T12 = 3FBF CC27		/* last */
-	T13 = FFFF CC25
-	T14 = FFFF CC25
-	T15 = FFFF CC25
-	T16 = FFFF CC25
-	T17 = FFFF CC25
-	T18 = FFFF CC25
-	T19 = FFFF CC25
-	T20 = FFFF CC25
-	T21 = FFFF CC25
-	T22 = FFFF CC25
-	T23 = FFFF CC25
-	T24 = CFFF CC24		/* Single Write */
-	T25 = 0FFF CC04
-	T26 = 0CFF CC04
-	T27 = 03FF CC00
-	T28 = 3FFF CC27		/* last */
-	T29 = FFFF CC25
-	T30 = FFFF CC25
-	T31 = FFFF CC25
-	T32 = CFFF CC24		/* Burst Write */
-	T33 = 0FFF CC04
-	T34 = 0CFF CC80
-	T35 = 03FF CC8C
-	T36 = 0CFF CC00
-	T37 = 33FF CC27		/* last */
-	T38 = FFFF CC25
-	T39 = FFFF CC25
-	T40 = FFFF CC25
-	T41 = FFFF CC25
-	T42 = FFFF CC25
-	T43 = FFFF CC25
-	T44 = FFFF CC25
-	T45 = FFFF CC25
-	T46 = FFFF CC25
-	T47 = FFFF CC25
-	T48 = C0FF CC24		/* Refresh */
-	T49 = 03FF CC24
-	T50 = 0FFF CC24
-	T51 = 0FFF CC24
-	T52 = 3FFF CC27		/* last */
-	T53 = FFFF CC25
-	T54 = FFFF CC25
-	T55 = FFFF CC25
-	T56 = FFFF CC25
-	T57 = FFFF CC25
-	T58 = FFFF CC25
-	T59 = FFFF CC25
-	T60 = FFFF CC25		/* Exception */
-	T61 = FFFF CC25
-	T62 = FFFF CC25
-	T63 = FFFF CC25
-
-
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
-/*	UPMB */
-/* */
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
----------------------------------------------------------------------
-
-/*### Chap. 16.6.4.1 */
-
-
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
-/*	MEMC */
-/* */
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
----------------------------------------------------------------------
-
-/*### BR0 & OR0 */
-/*### Base Registers & Option Registers */
-/*### Chap. 16.4.1 & 16.4.2 */
-/*### Offset : BR0(0x0000 0100) & OR0(0x0000 0104) */
-/*### Flash memory */
-
-	BA   = 1111 1110 0000 0000 0	/* Base addr = 0xFE00 0000 */
-	AT   = 000
-	PS   = 00
-	PARE = 0
-	WP   = 0
-	MS   = 0				/* GPCM */
-	V    = 1				/* Valid */
-
-	=> 0xFE00 0001
-
-	AM            = 1111 1110 0000 0000 0	/* 32MBytes */
-	ATM           = 000
-	CSNT/SAM      = 0
-	ACS/G5LA,G5LS = 00
-	BIH           = 1			/* Burst inhibited */
-	SCY           = 0100		/* cycle length = 4 */
-	SETA          = 0
-	TRLX          = 0
-	EHTR          = 0
-
-	=> 0xFE00 0140
-
-/*### BR1 & OR1 */
-/*### Base Registers & Option Registers */
-/*### Chap. 16.4.1 & 16.4.2 */
-/*### Offset : BR1(0x0000 0108) & OR1(0x0000 010C) */
-/*### SDRAM */
-
-	BA   = 0000 0000 0000 0000 0	/* Base addr = 0x0000 0000 */
-	AT   = 000
-	PS   = 00
-	PARE = 0
-	WP   = 0
-	MS   = 1				/* UPMA */
-	V    = 1				/* Valid */
-
-	=> 0x0000 0081
-
-	AM            = 1111 1110 0000 0000	/* 32MBytes */
-	ATM           = 000
-	CSNT/SAM      = 1
-	ACS/G5LA,G5LS = 11
-	BIH           = 0
-	SCY           = 0000		/* cycle length = 0 */
-	SETA          = 0
-	TRLX          = 0
-	EHTR          = 0
-
-	=> 0xFE00 0E00
-
-/*### BR2 & OR2 */
-/*### Base Registers & Option Registers */
-/*### Chap. 16.4.1 & 16.4.2 */
-/*### Offset : BR2(0x0000 0110) & OR2(0x0000 0114) */
-
-	BR2 & OR2 = 0x0000 0000		/* Not used */
-
-/*### BR3 & OR3 */
-/*### Base Registers & Option Registers */
-/*### Chap. 16.4.1 & 16.4.2 */
-/*### Offset : BR3(0x0000 0118) & OR3(0x0000 011C) */
-/*### BCSR */
-
-	BA   = 1111 1010 0100 0000 0	/* Base addr = 0xFA40 0000 */
-	AT   = 000
-	PS   = 00
-	PARE = 0
-	WP   = 0
-	MS   = 0				/* GPCM */
-	V    = 1				/* Valid */
-
-	=> 0xFA40 0001
-
-	AM            = 1111 1111 0111 1111 1	/* (?) */
-	ATM           = 000
-	CSNT/SAM      = 1
-	ACS/G5LA,G5LS = 00
-	BIH           = 1			/* Burst inhibited */
-	SCY           = 0001		/* cycle length = 1 */
-	SETA          = 0
-	TRLX          = 0
-
-	=> 0xFF7F 8910
-
-/*### BR4 & OR4 */
-/*### Base Registers & Option Registers */
-/*### Chap. 16.4.1 & 16.4.2 */
-/*### Offset : BR4(0x0000 0120) & OR4(0x0000 0124) */
-/*### NVRAM & SRAM */
-
-	BA   = 1111 1010 0000 0000 0	/* Base addr = 0xFA00 0000 */
-	AT   = 000
-	PS   = 01
-	PARE = 0
-	WP   = 0
-	MS   = 0				/* GPCM */
-	V    = 1				/* Valid */
-
-	=> 0xFA00 0401
-
-	AM            = 1111 1111 1111 1000 0	/* 8MByte */
-	ATM           = 000
-	CSNT/SAM      = 1
-	ACS/G5LA,G5LS = 00
-	BIH           = 1			/* Burst inhibited */
-	SCY           = 0111		/* cycle length = 7 */
-	SETA          = 0
-	TRLX          = 0
-
-	=> 0xFFF8 0970
-
-/*### BR5 & OR5 */
-/*### Base Registers & Option Registers */
-/*### Chap. 16.4.1 & 16.4.2 */
-/*### Offset : BR2(0x0000 0128) & OR2(0x0000 012C) */
-
-	BR5 & OR5 = 0x0000 0000		/* Not used */
-
-/*### BR6 & OR6 */
-/*### Base Registers & Option Registers */
-/*### Chap. 16.4.1 & 16.4.2 */
-/*### Offset : BR2(0x0000 0130) & OR2(0x0000 0134) */
-
-	BR6 & OR6 = 0x0000 0000		/* Not used */
-
-/*### BR7 & OR7 */
-/*### Base Registers & Option Registers */
-/*### Chap. 16.4.1 & 16.4.2 */
-/*### Offset : BR7(0x0000 0138) & OR7(0x0000 013C) */
-
-	BR7 & OR7 = 0x0000 0000		/* Not used */
-
-/*### MAR */
-/*### Memory Address Register */
-/*### Chap. 16.4.7 */
-/*### Offset : 0x0000 0164 */
-
-	MA = External memory address
-
-/*### MCR */
-/*### Memory Command Register */
-/*### Chap. 16.4.5 */
-/*### Offset : 0x0000 0168 */
-
-	OP   = xx			/* Command op code */
-	UM   = 1			/* Select UPMA */
-	MB   = 001			/* Select CS1 */
-	MCLF = xxxx			/* Loop times */
-	MAD  = xx xxxx		/* Memory array index */
-
-/*### MAMR */
-/*### Machine A Mode Register */
-/*### Chap. 16.4.4 */
-/*### Offset : 0x0000 0170 */
-
-	PTA = 0101 1000
-	PTAE = 1			/* Periodic timer A enabled */
-	AMA = 010
-	DSA = 00
-	G0CLA = 000
-	GPLA4DIS = 1
-	RLFA = 0100
-	WLFA = 0011
-	TLFA = 0000
-
-	=> 0x58A0 1430
-
-/*### MBMR */
-/*### Machine B Mode Register */
-/*### Chap. 16.4.4 */
-/*### Offset : 0x0000 0174 */
-
-	PTA = 0100 1110
-	PTAE = 0			/* Periodic timer B disabled */
-	AMA = 000
-	DSA = 00
-	G0CLA = 000
-	GPLA4DIS = 1
-	RLFA = 0000
-	WLFA = 0000
-	TLFA = 0000
-
-	=> 0x4E00 1000
-
-/*### MSTAT */
-/*### Memory Status Register */
-/*### Chap. 16.4.3 */
-/*### Offset : 0x0000 0178 */
-
-	PER0~PER7 = Parity error
-	WPER      = Write protection error
-
-	=> 0x0000
-
-/*### MPTPR */
-/*### Memory Periodic Timer Prescaler Register */
-/*### Chap. 16.4.8 */
-/*### Offset : 0x0000 017A */
-
-	PTP = 0000 1000		/* Divide by 8 */
-
-	=> 0x0800
-
-/*### MDR */
-/*### Memory Data Register */
-/*### Chap. 16.4.6 */
-/*### Offset : 0x0000 017C */
-
-	MD = Memory data contains the RAM array word
-
-
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
-/*	TIMERS */
-/* */
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
----------------------------------------------------------------------
-
-/*### TBREFx */
-/*### Timebase Reference Registers */
-/*### Chap. 11.9.2 */
-/*### Offset : TBREFF0(0x0000 0204)/TBREFF1(0x0000 0208) */
-/*### (Locked) */
-
-	TBREFF0 = 0xFFFF FFFF
-	TBREFF1 = 0xFFFF FFFF
-
----------------------------------------------------------------------
-
-/*### TBSCR */
-/*### Timebase Status and Control Registers */
-/*### Chap. 11.9.3 */
-/*### Offset : 0x0000 0200 */
-/*### (Locked) */
-
-	TBIRQ = 00000000
-	REF0  = 0
-	REF1  = 0
-	REFE0 = 0			/* Reference interrupt disable */
-	REFE1 = 0
-	TBF   = 1
-	TBE   = 1			/* Timebase enable */
-
-	=> 0x0003
-
----------------------------------------------------------------------
-
-/*### RTCSC */
-/*### Real-Time Clock Status and Control Registers */
-/*### Chap. 11.10.1 */
-/*### Offset : 0x0000 0220 */
-/*### (Locked) */
-
-	RTCIRQ = 00000000
-	SEC = 1
-	ALR = 0
-	38K = 0				/* PITRTCLK is driven by 32.768KHz */
-	SIE = 0
-	ALE = 0
-	RTF = 0
-	RTE = 1				/* Real-Time clock enabled */
-
-	=> 0x0081
-
----------------------------------------------------------------------
-
-/*### RTC */
-/*### Real-Time Clock Registers */
-/*### Chap. 11.10.2 */
-/*### Offset : 0x0000 0224 */
-/*### (Locked) */
-
-	RTC = Real time clock measured in second
-
----------------------------------------------------------------------
-
-/*### RTCAL */
-/*### Real-Time Clock Alarm Registers */
-/*### Chap. 11.10.3 */
-/*### Offset : 0x0000 022C */
-/*### (Locked) */
-
-	ALARM = 0xFFFF FFFF
-
----------------------------------------------------------------------
-
-/*### RTSEC */
-/*### Real-Time Clock Alarm Second Registers */
-/*### Chap. 11.10.4 */
-/*### Offset : 0x0000 0228 */
-/*### (Locked) */
-
-	COUNTER = Counter bits(fraction of a second)
-
----------------------------------------------------------------------
-
-/*### PISCR */
-/*### Periodic Interrupt Status and Control Register */
-/*### Chap. 11.11.1 */
-/*### Offset : 0x0000 0240 */
-/*### (Locked) */
-
-	PIRQ = 0
-	PS   = 0		/* Write 1 to clear */
-	PIE  = 0
-	PITF = 1
-	PTE  = 0		/* PIT disabled */
-
----------------------------------------------------------------------
-
-/*### PITC */
-/*### PIT Count Register */
-/*### Chap. 11.11.2 */
-/*### Offset : 0x0000 0244 */
-/*### (Locked) */
-
-	PITC = PIT count
-
----------------------------------------------------------------------
-
-/*### PITR */
-/*### PIT Register */
-/*### Chap. 11.11.3 */
-/*### Offset : 0x0000 0248 */
-/*### (Locked) */
-
-	PIT = PIT count		/* Read only */
-
-
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
-/*	CLOCKS */
-/* */
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
----------------------------------------------------------------------
-
-
----------------------------------------------------------------------
-
-/*### SCCR */
-/*### System Clock and Reset Control Register */
-/*### Chap. 15.6.1 */
-/*### Offset : 0x0000 0280 */
-/*### (Locked) */
-
-	COM    = 11		/* Clock output disabled */
-	TBS    = 1		/* Timebase frequency source is GCLK2 divided by 16 */
-	RTDIV  = 0		/* The clock is divided by 4 */
-	RTSEL  = 0		/* OSCM(Crystal oscillator) is selected */
-	CRQEN  = 0
-	PRQEN  = 0
-	EBDF   = 00		/* CLKOUT is GCLK2 divided by 1 */
-	DFSYNC = 00		/* Divided by 1 (normal operation) */
-	DFBRG  = 00		/* Divided by 1 (normal operation) */
-	DFNL   = 000
-	DFNH   = 000
-
-	=> 0x6200 0000
-
----------------------------------------------------------------------
-
-/*### PLPRCR */
-/*### PLL, Low-Power, and Reset Control Register */
-/*### Chap. 15.6.2 */
-/*### Offset : 0x0000 0284 */
-/*### (Locked) */
-
-	MF    = 0x005	/* 48MHz (?) (  = 8MHz * (MF+1) ) */
-	SPLSS = 0
-	TEXPS = 0
-	TMIST = 0
-	CSRC  = 0		/* The general system clock is generated by the DFNH field */
-	LPM   = 00		/* Normal high/normal low mode */
-	CSR   = 0
-	LOLRE = 0
-	FIOPD = 0
-
-	=> 0x0050 0000
-
----------------------------------------------------------------------
-
-/*### RSR */
-/*### Reset Status Register */
-/*### Chap. 12.2 */
-/*### Offset : 0x0000 0288 */
-/*### (Locked) */
-
-	EHRS  = External hard reset
-	ESRS  = External soft reset
-	LLRS  = Loss-of-lock reset
-	SWRS  = Software watchdog reset
-	CSRS  = Check stop reset
-	DBHRS = Debug port hard reset
-	DBSRS = Debug port soft reset
-	JTRS  = JTAG reset
-
-
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
-/*	DMA */
-/* */
-/*------------------------------------------------------------------- */
-/*------------------------------------------------------------------- */
----------------------------------------------------------------------
-
-/*### SDSR */
-/*### SDMA Status Register */
-/*### Chap. 20.2.2 */
-/*### Offset : 0x0000 0908 */
-
-	SBER = 0	/* SDMA channel bus error */
-	DSP2 = 0	/* DSP chain2 (Tx) interrupt */
-	DSP1 = 0	/* DSP chain1 (Rx) interrupt */
-
-	=> 0x00
-
-/*### SDMR */
-/*### SDMA Mask Register */
-/*### Chap. 20.2.3 */
-/*### Offset : 0x0000 090C */
-
-	SBER = 0
-	DSP2 = 0
-	DSP1 = 0	/* All interrupts are masked */
-
-	=> 0x00
-
-/*### SDAR */
-/*### SDMA Address Register */
-/*### Chap. 20.2.4 */
-/*### Offset : 0x0000 0904 */
-
-	AR = 0xxxxx xxxx	/* current system address */
-
-	=> 0xFA20 23AC
-
-/*### IDSRx */
-/*### IDMA Status Register */
-/*### Chap. 20.3.3.2 */
-/*### Offset : IDSR1(0x0000 0910) & IDSR2(0x0000 0918) */
-
-	AD   = 0
-	DONE = 0
-	OB   = 0
-
-	=> 0x00
-
-/*### IDMRx */
-/*### IDMA Mask Register */
-/*### Chap. 20.3.3.3 */
-/*### Offset : IDMR1(0x0000 0914) & IDMR2(0x0000 091C) */
-
-	AD   = 0
-	DONE = 0
-	OB   = 0
diff --git a/board/RPXlite/README.PlanetCore b/board/RPXlite/README.PlanetCore
deleted file mode 100644
index b73c5f5..0000000
--- a/board/RPXlite/README.PlanetCore
+++ /dev/null
@@ -1,163 +0,0 @@
-After several heart-struck failure, I got one workable way to program
-each other in FLASH between PlanetCore and U-Boot.
-
-Hardware Platform : RPXlite DW(EP 823 H1 DW)
-
-1. From U-Boot to PlanetCore
-
-Utilities : PlanetCore Boot Loader - PCL200.mot
-
-[root@sam tftpboot]# ppc_8xx-objcopy -O ppcboot
-PCL200.mot pcl200.bin
-
-[Target Operation]
-u-boot>t 100000 pcl200.bin
-u-boot>go 0x100000
-## Starting application at 0x00100000 ...
-
-MPC8xx PlanetCore Flash Burner v2.00
-Copyright 2001 Embedded Planet.  All rights reserved.
-
-Construct Flash Device.....done.
-
-
-Program MPC8xx PlanetCore Boot Loader v2.00
-Built Sep 19, 2001 at 14:34:42
-Image located from FC000000 to FC01B5D1.
-(Skipping an image, only loading low boot image)
-
-Low boot board detected, skipping high boot image.
-Erasing, programming and verifying will start in 20
-seconds
-Press P to start immediately or ESC to cancel
-Press Space or Enter for more options.
-..............
-
-Erasing
-Programming
-FLASH programmed successfully!
-Press R to induce a hard reset
-
-MPC8xx PlanetCore Boot Loader v2.00
-Copyright 2001 Embedded Planet.  All rights reserved.
-DRAM available size = 64 MB
-wvCV
-DRAM OK
->
-
-2. From PlanetCore to U-Boot
-
-Utilities : PlanetCore FLASH Burner - PCB200.mot
-
-Use Flash Burner to finish the work:
-
-First, TFTP the U-Boot image file to RAM; For example,
-RPXlite_DW.bin to 0x400000
-Second, TFTP FLASH Burner to RAM; For example,
-0x100000
-Third, run the FLASH Burner and Program the U-Boot
-image into the correct location in FLASH.
-
-[Target Operation]
-MPC8xx PlanetCore Boot Loader v2.00
-Copyright 2001 Embedded Planet.  All rights reserved.
-DRAM available size = 64 MB
-wvCV
-DRAM OK
->t
-Load using tftp via Ethernet
-Enter server IP address <172.16.115.6> :
-Enter server filename   <PCL200.mot> : RPXlite_DW.bin
-Enter (B)inary or (S)record input mode <S> : B
-Enter address offset  : <00400000 hex> :
-
-Total bytes = 120096 in 232184 uSecs
-Loaded addresses 00400000 through 0041D51F.
-Start address = 00400000
->t
-Load using tftp via Ethernet
-Enter server IP address <172.16.115.6> :
-Enter server filename   <RPXlite_DW.bin> : PCB200.mot
-Enter (B)inary or (S)record input mode <B> : S
-Enter address offset  : <00000000 hex> :
-.512.1024..2048....4096.....
-Total bytes = 326280 in 2570249 uSecs
-Loaded addresses 00100000 through 0011BB51.
-Start address = 00100000
->go
-[Go 00100000]
-
-MPC8xx PlanetCore Flash Burner v2.00
-Copyright 2001 Embedded Planet.  All rights reserved.
-
-Construct Flash Device.....done.
-
-Bad start address
-Start = 0xFFFFFFFF, target = 0xFFFFFFFF, length =
-0xFFFFFFFF
-Forcing Menu Interface
-
-h[elp]     Show commands.
-c[ode]     Show information on code to be loaded.
-di[splay]  Display all flash sections.
-du[mp]     Dump memory. d ? for more info.
-e[rase]    Erase flash sections.
-f[ill]     Fill flash sections.
-im[age]    Toggle load high, low, or both flash
-images.
-in[fo]     Show flash information.
-ma[p]      Show memory map.
-mo[dify]   Modify memory.  m ? for more info.
-p[rogram]  Erase, program, and verify now.
-reset      Restart the loader.
-s[how]     Show flash sections to erase and program.
-t[est]     Test flash sections.
-q[uit]     Quit without programming.
-#program 400000 ff000000 1D51F
-doProgram( 400000 ff000000 1D51F )
-
-Start = 0x00400000, target = 0xFF000000, length =
-0x0001D51F
-Erasing sector 0xFF000000, length 0x008000.
-Erasing sector 0xFF008000, length 0x008000.
-Erasing sector 0xFF010000, length 0x008000.
-Erasing sector 0xFF018000, length 0x008000.
-Programming FF000000 through FF01D51E
-FLASH programmed successfully!
-Press R to induce a hard reset
-
-Forcing Hard Reset by MachineCheck and
-ResetOnCheckstop...
-
-U-Boot 1.1.2 (Aug 29 2004 - 15:11:27)
-
-CPU:   PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB
-D-Cache
-Board: RPXlite_DW
-DRAM:  64 MB
-FLASH: 16 MB
-*** Warning - bad CRC, using default environment
-
-In:    serial
-Out:   serial
-Err:   serial
-Net:   SCC ETHERNET
-u-boot>
-
--------------------------------------------------
-
-Well, sometimes network function of PlanetCore couldn't work when
-switching from U-Boot to PlanetCore. For example, you couldn't
-download a file from HOST PC via TFTP. Don't worry, just restart your
-HOST PC and everything would work as smooth as clockwork. I don't
-know the reason WHY:-)
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Merry Christmas and Happy New Year!
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-=====
-Best regards,
-
-Sam
diff --git a/board/RPXlite/RPXlite.c b/board/RPXlite/RPXlite.c
deleted file mode 100644
index 08575a4..0000000
--- a/board/RPXlite/RPXlite.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * U-Boot port on RPXlite board
- *
- * DRAM related UPMA register values are modified.
- * See RPXLite engineering note : 50MHz/60ns - UPM RAM WORDS
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFCC25
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 00h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08,
-	0x3FBFCC27,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Read. (Offset 08h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88,
-	0x3FBFCC27,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Single Write. (Offset 18h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00,
-	0x3FFFCC27,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Write. (Offset 20h in UPMA RAM)
-	 */
-	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C,
-	0x0CFFCC00, 0x33FFCC27,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Refresh. (Offset 30h in UPMA RAM)
-	 */
-	0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24,
-	0x3FFFCC27,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Exception. (Offset 3Ch in UPMA RAM)
-	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	puts ("Board: RPXlite\n");
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size10;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	memctl->memc_mar = 0x00000000;
-
-	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80002230;	/* SDRAM bank 0 - refresh twice */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay (1000);
-
-	/* Check Bank 0 Memory Size
-	 * try 10 column mode
-	 */
-
-	size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM,
-			    SDRAM_MAX_SIZE);
-
-	return (size10);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size (base, maxsize));
-}
diff --git a/board/RPXlite/flash.c b/board/RPXlite/flash.c
deleted file mode 100644
index 21b11d4..0000000
--- a/board/RPXlite/flash.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * U-Boot port on RPXlite board
- *
- * Some of flash control words are modified. (from 2x16bit device
- * to 4x8bit device)
- * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices
- * are not tested.
- *
- * (?) Does an RPXLite board which
- *	does not use AM29LV800 flash memory exist ?
- *	I don't know...
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-/*	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR; */
-/*	volatile memctl8xx_t *memctl = &immap->im_memctl; */
-	unsigned long size_b0 ;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-/*
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE_DEBUG, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-*/
-	/* Remap FLASH according to real size */
-/*%%%
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-%%%*/
-	/* Re-do sizing to get full correct info */
-
-	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-	flash_info[0].size = size_b0;
-
-	return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00010000;
-		info->start[2] = base + 0x00018000;
-		info->start[3] = base + 0x00020000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + ((i-3) * 0x00040000) ;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00010000;
-		info->start[i--] = base + info->size - 0x00018000;
-		info->start[i--] = base + info->size - 0x00020000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00040000;
-		}
-	}
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0xAAA] = 0x00AA00AA ;
-	addr[0x555] = 0x00550055 ;
-	addr[0xAAA] = 0x00900090 ;
-
-	value = addr[0] ;
-
-	switch (value & 0x00FF00FF) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[2] ;		/* device ID		*/
-
-	switch (value & 0x00FF00FF) {
-	case (AMD_ID_LV400T & 0x00FF00FF):
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case (AMD_ID_LV400B & 0x00FF00FF):
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case (AMD_ID_LV800T & 0x00FF00FF):
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case (AMD_ID_LV800B & 0x00FF00FF):
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00400000;	/*%%% Size doubled by yooth */
-		break;				/* => 4 MB		*/
-
-	case (AMD_ID_LV160T & 0x00FF00FF):
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-
-	case (AMD_ID_LV160B & 0x00FF00FF):
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-#if 0	/* enable when device IDs are available */
-	case AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-
-	case AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-#endif
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-	/*%%% sector start address modified */
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00010000;
-		info->start[2] = base + 0x00018000;
-		info->start[3] = base + 0x00020000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + ((i-3) * 0x00040000) ;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00010000;
-		info->start[i--] = base + info->size - 0x00018000;
-		info->start[i--] = base + info->size - 0x00020000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00040000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr = (volatile unsigned long *)(info->start[i]);
-		info->protect[i] = addr[4] & 1 ;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (volatile unsigned long *)info->start[0];
-
-		*addr = 0xF0F0F0F0;	/* reset bank */
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-	addr[0xAAA] = 0x80808080;
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long *)(info->start[sect]) ;
-			addr[0] = 0x30303030 ;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (vu_long *)(info->start[l_sect]);
-	while ((addr[0] & 0x80808080) != 0x80808080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (vu_long *)info->start[0];
-	addr[0] = 0xF0F0F0F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long *)(info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-	addr[0xAAA] = 0xA0A0A0A0;
-
-	*((vu_long *)dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds
deleted file mode 100644
index 0eb2fba..0000000
--- a/board/RPXlite/u-boot.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug
deleted file mode 100644
index b9c84c7..0000000
--- a/board/RPXlite/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/boards.cfg b/boards.cfg
index 2125e90..1faa906 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -1246,5 +1246,3 @@ Orphan  powerpc     74xx_7xx       -           -               evb64260
 Orphan  powerpc     mpc824x        -           -               mousse              MOUSSE                               -                                                                                                                                 -
 Orphan  powerpc     mpc8260        -           -               -                   rsdproto                             -                                                                                                                                 -
 Orphan  powerpc     mpc8260        -           -               rpxsuper            RPXsuper                             -                                                                                                                                 -
-Orphan  powerpc     mpc8xx         -           -               -                   RPXClassic                           -                                                                                                                                 -
-Orphan  powerpc     mpc8xx         -           -               -                   RPXlite                              -                                                                                                                                 -
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index b068544..9915500 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,8 @@ easily if here is something they might want to dig for...
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+RPXClassic       powerpc     mpc8xx         -           2014-04-04
+RPXlite          powerpc     mpc8xx         -           2014-04-04
 genietv          powerpc     mpc8xx         -           2014-04-04
 mbx8xx           powerpc     mpc8xx         -           2014-04-04
 nx823            powerpc     mpc8xx         -           2014-04-04
diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c
index 3732583..6638277 100644
--- a/drivers/pcmcia/mpc8xx_pcmcia.c
+++ b/drivers/pcmcia/mpc8xx_pcmcia.c
@@ -211,7 +211,7 @@ static u_int m8xx_get_graycode(u_int size)
 
 #if	0
 
-#if	defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
+#if defined(CONFIG_RPXLITE)
 
 /* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
  * SYPCR is write once only, therefore must the slowest memory be faster
diff --git a/drivers/pcmcia/rpx_pcmcia.c b/drivers/pcmcia/rpx_pcmcia.c
index c7c425b..5b24f0b 100644
--- a/drivers/pcmcia/rpx_pcmcia.c
+++ b/drivers/pcmcia/rpx_pcmcia.c
@@ -18,7 +18,7 @@
 #endif
 
 #if	defined(CONFIG_PCMCIA)	\
-	&& (defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE))
+	&& defined(CONFIG_RPXLITE)
 
 #define	PCMCIA_BOARD_MSG	"RPX CLASSIC or RPX LITE"
 
@@ -70,4 +70,4 @@ static int pcmcia_hardware_disable(int slot)
 #endif
 
 
-#endif	/* CONFIG_PCMCIA && (CONFIG_RPXCLASSIC || CONFIG_RPXLITE) */
+#endif	/* CONFIG_PCMCIA && CONFIG_RPXLITE */
diff --git a/include/common.h b/include/common.h
index 580615b..baf361b 100644
--- a/include/common.h
+++ b/include/common.h
@@ -505,10 +505,6 @@ extern ssize_t spi_read	 (uchar *, int, uchar *, int);
 extern ssize_t spi_write (uchar *, int, uchar *, int);
 #endif
 
-#ifdef CONFIG_RPXCLASSIC
-void rpxclassic_init (void);
-#endif
-
 void rpxlite_init (void);
 
 #ifdef CONFIG_HERMES
diff --git a/include/commproc.h b/include/commproc.h
index 605aac2..29a3e61 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -954,41 +954,6 @@ typedef struct scc_enet {
 
 #endif /* CONFIG_QS860T */
 
-/***  RPXCLASSIC  *****************************************************/
-
-#ifdef CONFIG_RPXCLASSIC
-
-#ifdef CONFIG_FEC_ENET
-
-# define FEC_ENET				/* use FEC for EThernet */
-# undef SCC_ENET
-
-#else	/* ! CONFIG_FEC_ENET */
-
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define	PROFF_ENET	PROFF_SCC1
-#define	CPM_CR_ENET	CPM_CR_CH_SCC1
-#define	SCC_ENET	0
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00001000)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-
-#endif	/* CONFIG_FEC_ENET */
-
-#endif	/* CONFIG_RPXCLASSIC */
-
 /***  RPXLITE  ********************************************************/
 
 #ifdef CONFIG_RPXLITE
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
deleted file mode 100644
index 0f07d0c..0000000
--- a/include/configs/RPXClassic.h
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * U-Boot port on RPXlite board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define	RPXClassic_50MHz
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC860           1
-#define CONFIG_RPXCLASSIC		1
-
-#define	CONFIG_SYS_TEXT_BASE	0xff000000
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600	/* console baudrate = 9600bps	*/
-
-/* Define CONFIG_FEC_ENET to use Fast ethernet instead of ethernet on SCC1   */
-#define CONFIG_FEC_ENET
-#ifdef CONFIG_FEC_ENET
-#define CONFIG_SYS_DISCOVER_PHY        1
-#define CONFIG_MII              1
-#endif /* CONFIG_FEC_ENET */
-#define CONFIG_MISC_INIT_R
-
-/* Video console (graphic: Epson SED13806 on ECCX board, no keyboard         */
-#if 1
-#define CONFIG_VIDEO_SED13806
-#define CONFIG_NEC_NL6448BC20
-#define CONFIG_VIDEO_SED13806_16BPP
-
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
-#endif
-
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK 1
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"tftpboot; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
-	"bootm"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_RESET_ADDRESS	0x80000000
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0040000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00C0000	/* 4 ... 12 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFA200000
-
-/*-----------------------------------------------------------------------------
- * I2C Configuration
- *-----------------------------------------------------------------------------
- */
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0x34
-
-
-/* enable I2C and select the hardware/software driver */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef  CONFIG_SYS_I2C_SOFT		/* I2C bit-banged		*/
-
-#if defined(CONFIG_SYS_I2C_SOFT)
-#define CONFIG_SYS_I2C			1
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define I2C_PORT	1		/* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE	(iop->pdir |=  0x00000010)
-#define I2C_TRISTATE	(iop->pdir &= ~0x00000010)
-#define I2C_READ	((iop->pdat & 0x00000010) != 0)
-#define I2C_SDA(bit)	if(bit) iop->pdat |=  0x00000010; \
-			else    iop->pdat &= ~0x00000010
-#define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00000020; \
-			else    iop->pdat &= ~0x00000020
-#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
-
-
-#define CONFIG_SYS_I2C_SOFT_SPEED	50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0x34
-#endif
-
-# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM X24C16		*/
-# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address		*/
-/* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x3000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE	0xFF000000
-
-#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || defined(CONFIG_CMD_IDE)
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	0xFF000000
-/*%%% #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE */
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#if 0
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define	CONFIG_ENV_OFFSET		0x20000	/*   Offset   of Environment Sector  */
-#define CONFIG_ENV_SECT_SIZE       0x8000
-#define	CONFIG_ENV_SIZE		0x8000	/* Total Size of Environment Sector  */
-#else
-#define CONFIG_ENV_IS_IN_NVRAM     1
-#define CONFIG_ENV_ADDR            0xfa000100
-#define CONFIG_ENV_SIZE            0x1000
-#endif
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWP)
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC10)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-/*%%%#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC |  RTCSC_ALR | RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR	( (4 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS | PLPRCR_SPLSS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF00
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR	(SCCR_COM00 | SCCR_TBS)
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
-#define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/* #define	CONFIG_SYS_DER	0x2002000F */
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE_PRELIM	0xFE000000	/* FLASH base */
-#define CONFIG_SYS_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
-
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
-
-/*
- * BR1 and OR1 (SDRAM)
- *
- */
-#define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM base	*/
-#define	SDRAM_MAX_SIZE		0x01000000	/* max 16 MB */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000E00
-
-#define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/* RPXLITE mem setting */
-#define	CONFIG_SYS_BR3_PRELIM	0xFA400001		/* BCSR */
-#define CONFIG_SYS_OR3_PRELIM	0xff7f8970
-#define	CONFIG_SYS_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
-#define CONFIG_SYS_OR4_PRELIM	0xFFF80970
-
-/* ECCX CS settings                                                          */
-#define SED13806_OR             0xFFC00108     /* - 4 Mo
-						   - Burst inhibit
-						   - external TA             */
-#define SED13806_REG_ADDR       0xa0000000
-#define SED13806_ACCES          0x801           /* 16 bit access             */
-
-
-/* Global definitions for the ECCX board                                     */
-#define ECCX_CSR_ADDR           (0xfac00000)
-#define ECCX_CSR8_OFFSET        (0x8)
-#define ECCX_CSR11_OFFSET       (0xB)
-#define ECCX_CSR12_OFFSET       (0xC)
-
-#define ECCX_CSR8  (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR8_OFFSET)
-#define ECCX_CSR11 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR11_OFFSET)
-#define ECCX_CSR12 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR12_OFFSET)
-
-
-#define REG_GPIO_CTRL 0x008
-
-/* Definitions for CSR8                                                      */
-#define ECCX_ENEPSON            0x80    /* Bit 0:
-					   0= disable and reset SED1386
-					   1= enable SED1386                 */
-/* Bit 1:   0= SED1386 in Big Endian mode                                    */
-/*          1= SED1386 in little endian mode                                 */
-#define ECCX_LE                 0x40
-#define ECCX_BE                 0x00
-
-/* Bit 2,3: Selection                                                        */
-/*      00 = Disabled                                                        */
-/*      01 = CS2 is used for the SED1386                                     */
-/*      10 = CS5 is used for the SED1386                                     */
-/*      11 = reserved                                                        */
-#define ECCX_CS2                0x10
-#define ECCX_CS5                0x20
-
-/* Definitions for CSR12                                                     */
-#define ECCX_ID                 0x02
-#define ECCX_860                0x01
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA	58
-
-/*
- * Refresh clock Prescalar
- */
-#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV8
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 10 column SDRAM */
-#define CONFIG_SYS_MAMR_10COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |	\
-			 MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
-
-/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
-/* Configuration variable added by yooth. */
-/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
-
-/*
- * BCSRx
- *
- * Board Status and Control Registers
- *
- */
-
-#define BCSR0 0xFA400000
-#define BCSR1 0xFA400001
-#define BCSR2 0xFA400002
-#define BCSR3 0xFA400003
-
-#define BCSR0_ENMONXCVR	0x01	/* Monitor XVCR Control */
-#define BCSR0_ENNVRAM	0x02	/* CS4# Control */
-#define BCSR0_LED5		0x04	/* LED5 control 0='on' 1='off' */
-#define BCSR0_LED4		0x08	/* LED4 control 0='on' 1='off' */
-#define BCSR0_FULLDPLX	0x10	/* Ethernet XCVR Control */
-#define BCSR0_COLTEST	0x20
-#define BCSR0_ETHLPBK	0x40
-#define BCSR0_ETHEN	0x80
-
-#define BCSR1_PCVCTL7	0x01	/* PC Slot B Control */
-#define BCSR1_PCVCTL6	0x02
-#define BCSR1_PCVCTL5	0x04
-#define BCSR1_PCVCTL4	0x08
-#define BCSR1_IPB5SEL	0x10
-
-#define BCSR2_MIIRST    0x80
-#define BCSR2_MIIPWRDWN 0x40
-#define BCSR2_MIICTL    0x08
-
-#define BCSR3_BWRTC		0x01	/* Real Time Clock Battery */
-#define BCSR3_BWNVR		0x02	/* NVRAM Battery */
-#define BCSR3_RDY_BSY	0x04	/* Flash Operation */
-#define BCSR3_RPXL		0x08	/* Reserved (reads back '1') */
-#define BCSR3_D27		0x10	/* Dip Switch settings */
-#define BCSR3_D26		0x20
-#define BCSR3_D25		0x40
-#define BCSR3_D24		0x80
-
-
-/*
- * Environment setting
- */
-
-/* #define CONFIG_ETHADDR	00:10:EC:00:2C:A2 */
-/* #define CONFIG_IPADDR	10.10.106.1 */
-/* #define CONFIG_SERVERIP	10.10.104.11 */
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h
deleted file mode 100644
index a28230a..0000000
--- a/include/configs/RPXlite.h
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * U-Boot port on RPXlite board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define	RPXLite_50MHz
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#undef CONFIG_MPC860
-#define CONFIG_MPC850		1	/* This is a MPC850 CPU		*/
-#define CONFIG_RPXLITE		1
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600	/* console baudrate = 9600bps	*/
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"bootp; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
-	"bootm"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#define CONFIG_BZIP2		/* Include support for bzip2 compressed images  */
-
-/* enable I2C and select the hardware/software driver */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED	40000	/* 40 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
-/* Software (bit-bang) I2C driver configuration */
-#define PB_SCL		0x00000020	/* PB 26 */
-#define PB_SDA		0x00000010	/* PB 27 */
-
-#define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
-#define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
-#define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
-#define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
-#define I2C_SDA(bit)	if (bit) \
-				immr->im_cpm.cp_pbdat |=  PB_SDA; \
-			else \
-				immr->im_cpm.cp_pbdat &= ~PB_SDA
-#define I2C_SCL(bit)	if (bit) \
-				immr->im_cpm.cp_pbdat |=  PB_SCL; \
-			else \
-				immr->im_cpm.cp_pbdat &= ~PB_SCL
-#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
-
-/* M41T11 Serial Access Timekeeper(R) SRAM */
-#define CONFIG_RTC_M41T11 1
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-/* play along with the linux driver */
-#define CONFIG_SYS_M41T11_BASE_YEAR 1900
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define CONFIG_SYS_RESET_ADDRESS	0x09900000
-
-#define	CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFA200000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xFFC00000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#ifdef CONFIG_BZIP2
-#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve ~4 MB for malloc()   */
-#else
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
-#endif /* CONFIG_BZIP2 */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	19	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_SYS_DIRECT_FLASH_TFTP
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* We use one complete sector		*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
-#define CONFIG_ENV_OVERWRITE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_MLRC10)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-/*%%%#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR	( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF00
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR	(SCCR_COM11 | SCCR_TBS)
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
-#define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define	CONFIG_SYS_DER	0x2002000F*/
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE_PRELIM	0xFE000000	/* FLASH base */
-#define CONFIG_SYS_PRELIM_OR_AM	0xFE000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
-
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
-
-/*
- * BR1 and OR1 (SDRAM)
- *
- */
-#define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM base	*/
-#define	SDRAM_MAX_SIZE		0x01000000	/* max 16 MB */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000E00
-
-#define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/* RPXLITE mem setting */
-#define	CONFIG_SYS_BR3_PRELIM	0xFA400001		/* BCSR */
-#define CONFIG_SYS_OR3_PRELIM	0xFFFF8910
-#define	CONFIG_SYS_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
-#define CONFIG_SYS_OR4_PRELIM	0xFFFE0970
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA	58
-
-/*
- * Refresh clock Prescalar
- */
-#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV8
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 10 column SDRAM */
-#define CONFIG_SYS_MAMR_10COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |	\
-			 MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
-
-/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
-/* Configuration variable added by yooth. */
-/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
-
-/*
- * BCSRx
- *
- * Board Status and Control Registers
- *
- */
-
-#define BCSR0 0xFA400000
-#define BCSR1 0xFA400001
-#define BCSR2 0xFA400002
-#define BCSR3 0xFA400003
-
-#define BCSR0_ENMONXCVR	0x01	/* Monitor XVCR Control */
-#define BCSR0_ENNVRAM	0x02	/* CS4# Control */
-#define BCSR0_LED5	0x04	/* LED5 control 0='on' 1='off' */
-#define BCSR0_LED4	0x08	/* LED4 control 0='on' 1='off' */
-#define BCSR0_FULLDPLX	0x10	/* Ethernet XCVR Control */
-#define BCSR0_COLTEST	0x20
-#define BCSR0_ETHLPBK	0x40
-#define BCSR0_ETHEN	0x80
-
-#define BCSR1_PCVCTL7	0x01	/* PC Slot B Control */
-#define BCSR1_PCVCTL6	0x02
-#define BCSR1_PCVCTL5	0x04
-#define BCSR1_PCVCTL4	0x08
-#define BCSR1_IPB5SEL	0x10
-
-#define BCSR2_ENPA5HDR	0x08	/* USB Control */
-#define BCSR2_ENUSBCLK	0x10
-#define BCSR2_USBPWREN	0x20
-#define BCSR2_USBSPD	0x40
-#define BCSR2_USBSUSP	0x80
-
-#define BCSR3_BWRTC	0x01	/* Real Time Clock Battery */
-#define BCSR3_BWNVR	0x02	/* NVRAM Battery */
-#define BCSR3_RDY_BSY	0x04	/* Flash Operation */
-#define BCSR3_RPXL	0x08	/* Reserved (reads back '1') */
-#define BCSR3_D27	0x10	/* Dip Switch settings */
-#define BCSR3_D26	0x20
-#define BCSR3_D25	0x40
-#define BCSR3_D24	0x80
-
-#endif	/* __CONFIG_H */
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 1ad3e63..952a67c 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -22,7 +22,7 @@
 #if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
 
 					/* The RPX series use SLOT_B	*/
-#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
+#if defined(CONFIG_RPXLITE)
 # define CONFIG_PCMCIA_SLOT_B
 #elif defined(CONFIG_FADS)		/* The FADS series are a mess	*/
 # if defined(CONFIG_MPC86x) || defined(CONFIG_MPC821)
diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c
index 53c0e4d..d122500 100644
--- a/post/cpu/mpc8xx/ether.c
+++ b/post/cpu/mpc8xx/ether.c
@@ -365,11 +365,6 @@ static void scc_init (int scc_index)
 	immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC |
 			SCC_PSMR_NIB22 | SCC_PSMR_LPB;
 
-#ifdef CONFIG_RPXCLASSIC
-	*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
-	*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
-#endif
-
 #ifdef CONFIG_RPXLITE
 	*((uchar *) BCSR0) |= BCSR0_ETHEN;
 #endif
@@ -386,8 +381,6 @@ static void scc_init (int scc_index)
 	 */
 #if defined (CONFIG_FADS)
 	udelay (10000);				/* wait 10 ms */
-#elif defined(CONFIG_RPXCLASSIC)
-	udelay (100000);			/* wait 100 ms */
 #endif
 }
 
diff --git a/post/cpu/mpc8xx/uart.c b/post/cpu/mpc8xx/uart.c
index 25d63d8..5214c71 100644
--- a/post/cpu/mpc8xx/uart.c
+++ b/post/cpu/mpc8xx/uart.c
@@ -106,7 +106,7 @@ static void smc_init (int smc_index)
 			~(smc_index == 1 ? BCSR1_RS232EN_1 : BCSR1_RS232EN_2);
 #endif
 
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
+#if defined(CONFIG_RPXLITE)
 	/* Enable Monitor Port Transceiver */
 	*((uchar *) BCSR0) |= BCSR0_ENMONXCVR;
 #endif