Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

48 files changed, 1582 insertions, 132 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
index 598f7bd..fd7f5fa 100644
--- a/arch/powerpc/cpu/mpc85xx/b4860_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
@@ -57,7 +57,7 @@ struct liodn_id_table liodn_tbl[] = {
 
 	SET_USB_LIODN(1, "fsl-usb2-dr", 553),
 
-	SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
 
 	SET_DMA_LIODN(1, "fsl,elo3-dma", 147),
 	SET_DMA_LIODN(2, "fsl,elo3-dma", 227),
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 85d32fc..4cf8853 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -424,7 +424,6 @@ void fsl_erratum_a007212_workaround(void)
 
 ulong cpu_init_f(void)
 {
-	ulong flag = 0;
 	extern void m8560_cpm_reset (void);
 #if defined(CONFIG_SYS_DCSRBAR_PHYS) || \
 	(defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_CORENET))
@@ -499,18 +498,11 @@ ulong cpu_init_f(void)
 	in_be32(&gur->dcsrcr);
 #endif
 
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
-#ifdef CONFIG_DEEP_SLEEP
-	/* disable the console if boot from deep sleep */
-	if (in_be32(&gur->scrtsr[0]) & (1 << 3))
-		flag = GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
-#endif
-#endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_A007212
 	fsl_erratum_a007212_workaround();
 #endif
 
-	return flag;
+	return 0;
 }
 
 /* Implement a dummy function for those platforms w/o SERDES */
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
index 5cfae47..acb1353 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -15,16 +15,16 @@
 #include "fsl_corenet2_serdes.h"
 
 #ifdef CONFIG_SYS_FSL_SRDS_1
-static u64 serdes1_prtcl_map;
+static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_2
-static u64 serdes2_prtcl_map;
+static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_3
-static u64 serdes3_prtcl_map;
+static u8 serdes3_prtcl_map[SERDES_PRCTL_COUNT];
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_4
-static u64 serdes4_prtcl_map;
+static u8 serdes4_prtcl_map[SERDES_PRCTL_COUNT];
 #endif
 
 #ifdef DEBUG
@@ -78,24 +78,30 @@ static const char *serdes_prtcl_str[] = {
 	[INTERLAKEN] = "INTERLAKEN",
 	[QSGMII_SW1_A] = "QSGMII_SW1_A",
 	[QSGMII_SW1_B] = "QSGMII_SW1_B",
+	[SGMII_SW1_MAC1] = "SGMII_SW1_MAC1",
+	[SGMII_SW1_MAC2] = "SGMII_SW1_MAC2",
+	[SGMII_SW1_MAC3] = "SGMII_SW1_MAC3",
+	[SGMII_SW1_MAC4] = "SGMII_SW1_MAC4",
+	[SGMII_SW1_MAC5] = "SGMII_SW1_MAC5",
+	[SGMII_SW1_MAC6] = "SGMII_SW1_MAC6",
 };
 #endif
 
 int is_serdes_configured(enum srds_prtcl device)
 {
-	u64 ret = 0;
+	int ret = 0;
 
 #ifdef CONFIG_SYS_FSL_SRDS_1
-	ret |= (1ULL << device) & serdes1_prtcl_map;
+	ret |= serdes1_prtcl_map[device];
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_2
-	ret |= (1ULL << device) & serdes2_prtcl_map;
+	ret |= serdes2_prtcl_map[device];
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_3
-	ret |= (1ULL << device) & serdes3_prtcl_map;
+	ret |= serdes3_prtcl_map[device];
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_4
-	ret |= (1ULL << device) & serdes4_prtcl_map;
+	ret |= serdes4_prtcl_map[device];
 #endif
 
 	return !!ret;
@@ -171,12 +177,14 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 #define BCAP_OVD_MASK		0x10000000
 #define BYP_CAL_MASK		0x02000000
 
-u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
+void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
+		u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
 {
 	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u64 serdes_prtcl_map = 0;
 	u32 cfg;
 	int lane;
+
+	memset(serdes_prtcl_map, 0, sizeof(serdes_prtcl_map));
 #ifdef CONFIG_SYS_FSL_ERRATUM_A007186
 	struct ccsr_sfp_regs  __iomem *sfp_regs =
 			(struct ccsr_sfp_regs __iomem *)(CONFIG_SYS_SFP_ADDR);
@@ -312,38 +320,43 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
 
 	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
 		enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
-		serdes_prtcl_map |= (1ULL << lane_prtcl);
+		if (unlikely(lane_prtcl >= SERDES_PRCTL_COUNT))
+			debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
+		else
+			serdes_prtcl_map[lane_prtcl] = 1;
 	}
-
-	return serdes_prtcl_map;
 }
 
 void fsl_serdes_init(void)
 {
 
 #ifdef CONFIG_SYS_FSL_SRDS_1
-	serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
-		CONFIG_SYS_FSL_CORENET_SERDES_ADDR,
-		FSL_CORENET2_RCWSR4_SRDS1_PRTCL,
-		FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT);
+	serdes_init(FSL_SRDS_1,
+		    CONFIG_SYS_FSL_CORENET_SERDES_ADDR,
+		    FSL_CORENET2_RCWSR4_SRDS1_PRTCL,
+		    FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT,
+		    serdes1_prtcl_map);
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_2
-	serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
-		CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000,
-		FSL_CORENET2_RCWSR4_SRDS2_PRTCL,
-		FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT);
+	serdes_init(FSL_SRDS_2,
+		    CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000,
+		    FSL_CORENET2_RCWSR4_SRDS2_PRTCL,
+		    FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT,
+		    serdes2_prtcl_map);
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_3
-	serdes3_prtcl_map = serdes_init(FSL_SRDS_3,
-		CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000,
-		FSL_CORENET2_RCWSR4_SRDS3_PRTCL,
-		FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT);
+	serdes_init(FSL_SRDS_3,
+		    CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000,
+		    FSL_CORENET2_RCWSR4_SRDS3_PRTCL,
+		    FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT,
+		    serdes3_prtcl_map);
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_4
-	serdes4_prtcl_map = serdes_init(FSL_SRDS_4,
-		CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000,
-		FSL_CORENET2_RCWSR4_SRDS4_PRTCL,
-		FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT);
+	serdes_init(FSL_SRDS_4,
+		    CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000,
+		    FSL_CORENET2_RCWSR4_SRDS4_PRTCL,
+		    FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT,
+		    serdes4_prtcl_map);
 #endif
 
 }
diff --git a/arch/powerpc/cpu/mpc85xx/t1024_serdes.c b/arch/powerpc/cpu/mpc85xx/t1024_serdes.c
index 7dc8385..2ba314a 100644
--- a/arch/powerpc/cpu/mpc85xx/t1024_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t1024_serdes.c
@@ -11,6 +11,7 @@
 
 
 static u8 serdes_cfg_tbl[][4] = {
+	[0x40] = {PCIE1, PCIE1, PCIE1, PCIE1},
 	[0xD5] = {QSGMII_FM1_A, PCIE3, PCIE2, PCIE1},
 	[0xD6] = {QSGMII_FM1_A, PCIE3, PCIE2, SATA1},
 	[0x95] = {XFI_FM1_MAC1, PCIE3, PCIE2, PCIE1},
@@ -20,6 +21,7 @@ static u8 serdes_cfg_tbl[][4] = {
 	[0x56] = {PCIE1, PCIE3, PCIE2, SATA1},
 	[0x5A] = {PCIE1, PCIE3, SGMII_FM1_DTSEC2, SATA1},
 	[0x5B] = {PCIE1, PCIE3, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC1},
+	[0x5F] = {PCIE1, PCIE3, SGMII_2500_FM1_DTSEC2, SGMII_2500_FM1_DTSEC1},
 	[0x6A] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC2, SATA1},
 	[0x6B] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC1},
 	[0x6F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_2500_FM1_DTSEC2,
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
index d86bb27..d5dccd5 100644
--- a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
@@ -33,10 +33,10 @@ static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
 		PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
 	[0x87] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
-	[0x89] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A,
-		PCIE2, PCIE3, QSGMII_SW1_B, SATA1},
-	[0x8D] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A,
-		PCIE2, QSGMII_SW1_B, QSGMII_SW1_B, QSGMII_SW1_B},
+	[0x89] = {PCIE1, SGMII_SW1_MAC3, SGMII_SW1_MAC1, SGMII_SW1_MAC2,
+		PCIE2, PCIE3, SGMII_SW1_MAC4, SATA1},
+	[0x8D] = {PCIE1, SGMII_SW1_MAC3, SGMII_SW1_MAC1, SGMII_SW1_MAC2,
+		PCIE2, SGMII_SW1_MAC6, SGMII_SW1_MAC4, SGMII_SW1_MAC5},
 	[0x8F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		AURORA, NONE, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
 	[0xA5] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 2d28eb2..c92589f 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -15,6 +15,7 @@
 #include <netdev.h>
 #include <asm/cache.h>
 #include <asm/io.h>
+#include <vsc9953.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -271,5 +272,9 @@ int cpu_eth_init(bd_t *bis)
 #ifdef CONFIG_FMAN_ENET
 	fm_standard_init(bis);
 #endif
+
+#ifdef CONFIG_VSC9953
+	vsc9953_init(bis);
+#endif
 	return 0;
 }
diff --git a/arch/powerpc/include/asm/arch-mpc85xx/gpio.h b/arch/powerpc/include/asm/arch-mpc85xx/gpio.h
new file mode 100644
index 0000000..8beed30
--- /dev/null
+++ b/arch/powerpc/include/asm/arch-mpc85xx/gpio.h
@@ -0,0 +1,15 @@
+/*
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Dummy header file to enable CONFIG_OF_CONTROL.
+ * If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled.
+ * It includes <asm/arch/gpio.h> via <asm/gpio.h>, so those SoCs that enable
+ * OF_CONTROL must have arch/gpio.h.
+ */
+
+#ifndef __ASM_ARCH_MX85XX_GPIO_H
+#define __ASM_ARCH_MX85XX_GPIO_H
+
+#endif
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index 14c6fc3..b4c0c99 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -12,6 +12,8 @@
 #define CONFIG_SYS_PBI_FLASH_BASE		0xc0000000
 #elif defined(CONFIG_BSC9132QDS)
 #define CONFIG_SYS_PBI_FLASH_BASE		0xc8000000
+#elif defined(CONFIG_C29XPCIE)
+#define CONFIG_SYS_PBI_FLASH_BASE		0xcc000000
 #else
 #define CONFIG_SYS_PBI_FLASH_BASE		0xce000000
 #endif
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 8e0e190..45e248e 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -87,6 +87,13 @@ enum srds_prtcl {
 	SGMII_2500_FM2_DTSEC6,
 	SGMII_2500_FM2_DTSEC9,
 	SGMII_2500_FM2_DTSEC10,
+	SGMII_SW1_MAC1,
+	SGMII_SW1_MAC2,
+	SGMII_SW1_MAC3,
+	SGMII_SW1_MAC4,
+	SGMII_SW1_MAC5,
+	SGMII_SW1_MAC6,
+	SERDES_PRCTL_COUNT	/* Keep this item the last one */
 };
 
 enum srds {
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index e6d5355..91645d3 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -346,13 +346,6 @@ void board_init_f(ulong bootflag)
 #ifdef CONFIG_PRAM
 	ulong reg;
 #endif
-#ifdef CONFIG_DEEP_SLEEP
-	const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	struct ccsr_scfg *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
-	u32 start_addr;
-	typedef void (*func_t)(void);
-	func_t kernel_resume;
-#endif
 
 	/* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
@@ -372,20 +365,6 @@ void board_init_f(ulong bootflag)
 		if ((*init_fnc_ptr) () != 0)
 			hang();
 
-#ifdef CONFIG_DEEP_SLEEP
-	/* Jump to kernel in deep sleep case */
-	if (in_be32(&gur->scrtsr[0]) & (1 << 3)) {
-		l2cache_init();
-#if defined(CONFIG_RAMBOOT_PBL)
-		disable_cpc_sram();
-#endif
-		enable_cpc();
-		start_addr = in_be32(&scfg->sparecr[1]);
-		kernel_resume = (func_t)start_addr;
-		kernel_resume();
-	}
-#endif
-
 #ifdef CONFIG_POST
 	post_bootmode_init();
 	post_run(NULL, POST_ROM | post_bootmode_get(NULL));
diff --git a/board/freescale/c29xpcie/MAINTAINERS b/board/freescale/c29xpcie/MAINTAINERS
index db2e5e3..3308839 100644
--- a/board/freescale/c29xpcie/MAINTAINERS
+++ b/board/freescale/c29xpcie/MAINTAINERS
@@ -6,3 +6,5 @@ F:	include/configs/C29XPCIE.h
 F:	configs/C29XPCIE_defconfig
 F:	configs/C29XPCIE_NAND_defconfig
 F:	configs/C29XPCIE_SPIFLASH_defconfig
+F:	configs/C29XPCIE_NOR_SECBOOT_defconfig
+F:	configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
diff --git a/board/freescale/corenet_ds/MAINTAINERS b/board/freescale/corenet_ds/MAINTAINERS
index c8ca674..745847c 100644
--- a/board/freescale/corenet_ds/MAINTAINERS
+++ b/board/freescale/corenet_ds/MAINTAINERS
@@ -27,3 +27,4 @@ F:	configs/P5040DS_defconfig
 F:	configs/P5040DS_NAND_defconfig
 F:	configs/P5040DS_SDCARD_defconfig
 F:	configs/P5040DS_SPIFLASH_defconfig
+F:	configs/P5040DS_SECURE_BOOT_defconfig
diff --git a/board/freescale/t102xqds/ddr.c b/board/freescale/t102xqds/ddr.c
index 46fc64e..2d4d10f 100644
--- a/board/freescale/t102xqds/ddr.c
+++ b/board/freescale/t102xqds/ddr.c
@@ -11,6 +11,7 @@
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
+#include <asm/mpc85xx_gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -152,6 +153,19 @@ found:
 #endif
 }
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+	void __iomem *qixis_base = (void *)QIXIS_BASE;
+
+	/* does not provide HW signals for power management */
+	clrbits_8(qixis_base + 0x21, 0x2);
+	/* Disable MCKE isolation */
+	gpio_set_value(2, 0);
+	udelay(1);
+}
+#endif
+
 phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
@@ -166,5 +180,10 @@ phys_size_t initdram(int board_type)
 	/* DDR has been initialised by first stage boot loader */
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+	fsl_dp_resume();
+#endif
+
 	return dram_size;
 }
diff --git a/board/freescale/t102xqds/t102xqds.c b/board/freescale/t102xqds/t102xqds.c
index f3141b5..708afca 100644
--- a/board/freescale/t102xqds/t102xqds.c
+++ b/board/freescale/t102xqds/t102xqds.c
@@ -19,10 +19,10 @@
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include <hwconfig.h>
-#include <asm/mpc85xx_gpio.h>
 #include "../common/qixis.h"
 #include "t102xqds.h"
 #include "t102xqds_qixis.h"
+#include "../common/sleep.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -242,6 +242,16 @@ void board_retimer_ds125df111_init(void)
 	i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
 }
 
+int board_early_init_f(void)
+{
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
+	return 0;
+}
+
 int board_early_init_r(void)
 {
 #ifdef CONFIG_SYS_FLASH_BASE
@@ -395,14 +405,3 @@ void qixis_dump_switch(void)
 		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
 	}
 }
-
-#ifdef CONFIG_DEEP_SLEEP
-void board_mem_sleep_setup(void)
-{
-	/* does not provide HW signals for power management */
-	QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2));
-	/* Disable MCKE isolation */
-	gpio_set_value(2, 0);
-	udelay(1);
-}
-#endif
diff --git a/board/freescale/t102xrdb/cpld.h b/board/freescale/t102xrdb/cpld.h
index 5a3100f..db50f81 100644
--- a/board/freescale/t102xrdb/cpld.h
+++ b/board/freescale/t102xrdb/cpld.h
@@ -43,3 +43,7 @@ void cpld_write(unsigned int reg, u8 value);
 #define CPLD_LBMAP_RESET	0xFF
 #define CPLD_LBMAP_SHIFT	0x03
 #define CPLD_BOOT_SEL	   0x80
+
+#define CPLD_PCIE_SGMII_MUX	0x80
+#define CPLD_OVERRIDE_BOOT_EN	0x01
+#define CPLD_OVERRIDE_MUX_EN	0x02 /* PCIE/2.5G-SGMII mux override enable */
diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c
index a20330b..a2a8f4c 100644
--- a/board/freescale/t102xrdb/ddr.c
+++ b/board/freescale/t102xrdb/ddr.c
@@ -11,6 +11,7 @@
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
+#include <asm/mpc85xx_gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -136,6 +137,19 @@ found:
 #endif
 }
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+	void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE;
+
+	/* does not provide HW signals for power management */
+	clrbits_8(cpld_base + 0x17, 0x40);
+	/* Disable MCKE isolation */
+	gpio_set_value(2, 0);
+	udelay(1);
+}
+#endif
+
 phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
@@ -150,5 +164,10 @@ phys_size_t initdram(int board_type)
 	/* DDR has been initialised by first stage boot loader */
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+	fsl_dp_resume();
+#endif
+
 	return dram_size;
 }
diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c
index 2e400c4..f611ff0 100644
--- a/board/freescale/t102xrdb/eth_t102xrdb.c
+++ b/board/freescale/t102xrdb/eth_t102xrdb.c
@@ -21,6 +21,7 @@
 #include <phy.h>
 #include <asm/fsl_dtsec.h>
 #include <asm/fsl_serdes.h>
+#include "../common/fman.h"
 
 int board_eth_init(bd_t *bis)
 {
@@ -51,15 +52,22 @@ int board_eth_init(bd_t *bis)
 	/* Register the 10G MDIO bus */
 	fm_memac_mdio_init(bis, &tgec_mdio_info);
 
-	/* Set the two on-board RGMII PHY address */
-	fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR);
+	/* Set the on-board RGMII PHY address */
 	fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY1_ADDR);
 
 	switch (srds_s1) {
 	case 0x95:
-		/* 10G XFI with Aquantia PHY */
+		/* set the on-board RGMII2  PHY */
+		fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR);
+
+		/* set 10G XFI with Aquantia AQR105 PHY */
 		fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
 		break;
+	case 0x77:
+	case 0x135:
+		/* set the on-board 2.5G SGMII AQR105 PHY */
+		fm_info_set_phy_address(FM1_DTSEC3, SGMII_PHY1_ADDR);
+		break;
 	default:
 		printf("SerDes protocol 0x%x is not supported on T102xRDB\n",
 		       srds_s1);
@@ -73,6 +81,10 @@ int board_eth_init(bd_t *bis)
 			dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
 			fm_info_set_mdio(i, dev);
 			break;
+		case PHY_INTERFACE_MODE_SGMII_2500:
+			dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+			fm_info_set_mdio(i, dev);
+			break;
 		default:
 			break;
 		}
@@ -95,6 +107,18 @@ int board_eth_init(bd_t *bis)
 	return pci_eth_init(bis);
 }
 
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+			      enum fm_port port, int offset)
+{
+	if ((fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) &&
+	    (port == FM1_DTSEC3)) {
+		fdt_set_phy_handle(fdt, compat, addr, "sg_2500_aqr105_phy4");
+		fdt_setprop(fdt, offset, "phy-connection-type",
+			    "sgmii-2500", 10);
+		fdt_status_disabled_by_alias(fdt, "xg_aqr105_phy3");
+	}
+}
+
 void fdt_fixup_board_enet(void *fdt)
 {
 }
diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c
index dd2dec4..1a3a996 100644
--- a/board/freescale/t102xrdb/spl.c
+++ b/board/freescale/t102xrdb/spl.c
@@ -11,6 +11,7 @@
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <spi_flash.h>
+#include "../common/sleep.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -42,6 +43,12 @@ void board_init_f(ulong bootflag)
 
 	console_init_f();
 
+#ifdef CONFIG_DEEP_SLEEP
+	/* disable the console if boot from deep sleep */
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
 	/* initialize selected port with appropriate baud rate */
 	sys_clk = get_board_sys_clk();
 	plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c
index f5c438d..e196f12 100644
--- a/board/freescale/t102xrdb/t102xrdb.c
+++ b/board/freescale/t102xrdb/t102xrdb.c
@@ -16,10 +16,10 @@
 #include <asm/fsl_serdes.h>
 #include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
-#include <asm/mpc85xx_gpio.h>
 #include <fm_eth.h>
 #include "t102xrdb.h"
 #include "cpld.h"
+#include "../common/sleep.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -27,6 +27,11 @@ int checkboard(void)
 {
 	struct cpu_type *cpu = gd->arch.cpu;
 	static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"};
+	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_s1;
+
+	srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
 
 	printf("Board: %sRDB, ", cpu->name);
 	printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ",
@@ -50,7 +55,40 @@ int checkboard(void)
 #endif
 
 	puts("SERDES Reference Clocks:\n");
-	printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
+	if (srds_s1 == 0x95)
+		printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
+	else
+		printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[0]);
+
+	return 0;
+}
+
+static void board_mux_lane(void)
+{
+	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_prtcl_s1;
+	u8 reg = CPLD_READ(misc_ctl_status);
+
+	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	if (srds_prtcl_s1 == 0x95) {
+		/* Route Lane B to PCIE */
+		CPLD_WRITE(misc_ctl_status, reg & ~CPLD_PCIE_SGMII_MUX);
+	} else {
+		/* Route Lane B to SGMII */
+		CPLD_WRITE(misc_ctl_status, reg | CPLD_PCIE_SGMII_MUX);
+	}
+	CPLD_WRITE(boot_override, CPLD_OVERRIDE_MUX_EN);
+}
+
+int board_early_init_f(void)
+{
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
 
 	return 0;
 }
@@ -86,6 +124,7 @@ int board_early_init_r(void)
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	setup_portals();
 #endif
+	board_mux_lane();
 
 	return 0;
 }
@@ -131,14 +170,3 @@ int ft_board_setup(void *blob, bd_t *bd)
 
 	return 0;
 }
-
-#ifdef CONFIG_DEEP_SLEEP
-void board_mem_sleep_setup(void)
-{
-	/* does not provide HW signals for power management */
-	CPLD_WRITE(misc_ctl_status, (CPLD_READ(misc_ctl_status) & ~0x40));
-	/* Disable MCKE isolation */
-	gpio_set_value(2, 0);
-	udelay(1);
-}
-#endif
diff --git a/board/freescale/t1040qds/ddr.c b/board/freescale/t1040qds/ddr.c
index 43f952f..8240240 100644
--- a/board/freescale/t1040qds/ddr.c
+++ b/board/freescale/t1040qds/ddr.c
@@ -11,6 +11,7 @@
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
+#include <asm/mpc85xx_gpio.h>
 #include "ddr.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -100,6 +101,19 @@ found:
 #endif
 }
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+	void __iomem *qixis_base = (void *)QIXIS_BASE;
+
+	/* does not provide HW signals for power management */
+	clrbits_8(qixis_base + 0x21, 0x2);
+	/* Disable MCKE isolation */
+	gpio_set_value(2, 0);
+	udelay(1);
+}
+#endif
+
 phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
@@ -112,5 +126,10 @@ phys_size_t initdram(int board_type)
 	dram_size *= 0x100000;
 
 	puts("    DDR: ");
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+	fsl_dp_resume();
+#endif
+
 	return dram_size;
 }
diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c
index 06d9086..8c82934 100644
--- a/board/freescale/t1040qds/eth.c
+++ b/board/freescale/t1040qds/eth.c
@@ -18,6 +18,7 @@
 #include <fsl_mdio.h>
 #include <malloc.h>
 #include <asm/fsl_dtsec.h>
+#include <vsc9953.h>
 
 #include "../common/fman.h"
 #include "../common/qixis.h"
@@ -216,6 +217,7 @@ static void initialize_lane_to_slot(void)
 		lane_to_slot[1] = 7;
 		lane_to_slot[2] = 7;
 		lane_to_slot[3] = 7;
+		lane_to_slot[6] = 7;
 		lane_to_slot[7] = 7;
 		break;
 	case 0x8d:
@@ -438,6 +440,12 @@ int board_eth_init(bd_t *bis)
 #ifdef CONFIG_FMAN_ENET
 	struct memac_mdio_info memac_mdio_info;
 	unsigned int i;
+#ifdef CONFIG_VSC9953
+	int lane;
+	int phy_addr;
+	phy_interface_t phy_int;
+	struct mii_dev *bus;
+#endif
 
 	printf("Initializing Fman\n");
 	set_brdcfg9_for_gtx_clk();
@@ -477,6 +485,7 @@ int board_eth_init(bd_t *bis)
 	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
 		switch (fm_info_get_enet_if(i)) {
 		case PHY_INTERFACE_MODE_QSGMII:
+			fm_info_set_mdio(i, NULL);
 			break;
 		case PHY_INTERFACE_MODE_SGMII:
 			t1040_handle_phy_interface_sgmii(i);
@@ -491,6 +500,90 @@ int board_eth_init(bd_t *bis)
 		}
 	}
 
+#ifdef CONFIG_VSC9953
+	for (i = 0; i < VSC9953_MAX_PORTS; i++) {
+		lane = -1;
+		phy_addr = 0;
+		phy_int = PHY_INTERFACE_MODE_NONE;
+		switch (i) {
+		case 0:
+		case 1:
+		case 2:
+		case 3:
+			lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A);
+			/* PHYs connected over QSGMII */
+			if (lane >= 0) {
+				phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR +
+						i;
+				phy_int = PHY_INTERFACE_MODE_QSGMII;
+				break;
+			}
+			lane = serdes_get_first_lane(FSL_SRDS_1,
+					SGMII_SW1_MAC1 + i);
+
+			if (lane < 0)
+				break;
+
+			/* PHYs connected over QSGMII */
+			if (i != 3 || lane_to_slot[lane] == 7)
+				phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR
+					+ i;
+			else
+				phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR;
+			phy_int = PHY_INTERFACE_MODE_SGMII;
+			break;
+		case 4:
+		case 5:
+		case 6:
+		case 7:
+			lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B);
+			/* PHYs connected over QSGMII */
+			if (lane >= 0) {
+				phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR +
+						i - 4;
+				phy_int = PHY_INTERFACE_MODE_QSGMII;
+				break;
+			}
+			lane = serdes_get_first_lane(FSL_SRDS_1,
+					SGMII_SW1_MAC1 + i);
+			/* PHYs connected over SGMII */
+			if (lane >= 0) {
+				phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR
+						+ i - 3;
+				phy_int = PHY_INTERFACE_MODE_SGMII;
+			}
+			break;
+		case 8:
+			if (serdes_get_first_lane(FSL_SRDS_1,
+						  SGMII_FM1_DTSEC1) < 0)
+				/* FM1@DTSEC1 is connected to SW1@PORT8 */
+				vsc9953_port_enable(i);
+			break;
+		case 9:
+			if (serdes_get_first_lane(FSL_SRDS_1,
+						  SGMII_FM1_DTSEC2) < 0) {
+				/* Enable L2 On MAC2 using SCFG */
+				struct ccsr_scfg *scfg = (struct ccsr_scfg *)
+						CONFIG_SYS_MPC85xx_SCFG;
+
+				out_be32(&scfg->esgmiiselcr,
+					 in_be32(&scfg->esgmiiselcr) |
+					 (0x80000000));
+				vsc9953_port_enable(i);
+			}
+			break;
+		}
+
+		if (lane >= 0) {
+			bus = mii_dev_for_muxval(lane_to_slot[lane]);
+			vsc9953_port_info_set_mdio(i, bus);
+			vsc9953_port_enable(i);
+		}
+		vsc9953_port_info_set_phy_address(i, phy_addr);
+		vsc9953_port_info_set_phy_int(i, phy_int);
+	}
+
+#endif
 	cpu_eth_init(bis);
 #endif
 
diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c
index 13285be..eaca57f 100644
--- a/board/freescale/t1040qds/t1040qds.c
+++ b/board/freescale/t1040qds/t1040qds.c
@@ -19,8 +19,8 @@
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include <hwconfig.h>
-#include <asm/mpc85xx_gpio.h>
 
+#include "../common/sleep.h"
 #include "../common/qixis.h"
 #include "t1040qds.h"
 #include "t1040qds_qixis.h"
@@ -115,6 +115,16 @@ static void qe_board_setup(void)
 	}
 }
 
+int board_early_init_f(void)
+{
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
+	return 0;
+}
+
 int board_early_init_r(void)
 {
 #ifdef CONFIG_SYS_FLASH_BASE
@@ -281,14 +291,3 @@ int board_need_mem_reset(void)
 {
 	return 1;
 }
-
-#ifdef CONFIG_DEEP_SLEEP
-void board_mem_sleep_setup(void)
-{
-	/* does not provide HW signals for power management */
-	QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2));
-	/* Disable MCKE isolation */
-	gpio_set_value(2, 0);
-	udelay(1);
-}
-#endif
diff --git a/board/freescale/t104xrdb/MAINTAINERS b/board/freescale/t104xrdb/MAINTAINERS
index b61e1c0..13d9be9 100644
--- a/board/freescale/t104xrdb/MAINTAINERS
+++ b/board/freescale/t104xrdb/MAINTAINERS
@@ -21,3 +21,4 @@ T1040RDB_SECURE_BOOT BOARD
 M:	Aneesh Bansal  <aneesh.bansal@freescale.com>
 S:	Maintained
 F:	configs/T1040RDB_SECURE_BOOT_defconfig
+F:	configs/T1042RDB_SECURE_BOOT_defconfig
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
index c8b6c67..7581a4cd 100644
--- a/board/freescale/t104xrdb/eth.c
+++ b/board/freescale/t104xrdb/eth.c
@@ -6,11 +6,13 @@
 
 #include <common.h>
 #include <netdev.h>
+#include <asm/fsl_serdes.h>
 #include <asm/immap_85xx.h>
 #include <fm_eth.h>
 #include <fsl_mdio.h>
 #include <malloc.h>
 #include <asm/fsl_dtsec.h>
+#include <vsc9953.h>
 
 #include "../common/fman.h"
 
@@ -20,6 +22,11 @@ int board_eth_init(bd_t *bis)
 	struct memac_mdio_info memac_mdio_info;
 	unsigned int i;
 	int phy_addr = 0;
+#ifdef CONFIG_VSC9953
+	phy_interface_t phy_int;
+	struct mii_dev *bus;
+#endif
+
 	printf("Initializing Fman\n");
 
 	memac_mdio_info.regs =
@@ -72,10 +79,58 @@ int board_eth_init(bd_t *bis)
 			fm_info_set_phy_address(i, 0);
 			break;
 		}
-		fm_info_set_mdio(i,
-				 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+		if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_QSGMII ||
+		    fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_NONE)
+			fm_info_set_mdio(i, NULL);
+		else
+			fm_info_set_mdio(i,
+					 miiphy_get_dev_by_name(
+							DEFAULT_FM_MDIO_NAME));
+	}
+
+#ifdef CONFIG_VSC9953
+	/* SerDes configured for QSGMII */
+	if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A) >= 0) {
+		for (i = 0; i < 4; i++) {
+			bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+			phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR + i;
+			phy_int = PHY_INTERFACE_MODE_QSGMII;
+
+			vsc9953_port_info_set_mdio(i, bus);
+			vsc9953_port_info_set_phy_address(i, phy_addr);
+			vsc9953_port_info_set_phy_int(i, phy_int);
+			vsc9953_port_enable(i);
+		}
+	}
+	if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B) >= 0) {
+		for (i = 4; i < 8; i++) {
+			bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+			phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4;
+			phy_int = PHY_INTERFACE_MODE_QSGMII;
+
+			vsc9953_port_info_set_mdio(i, bus);
+			vsc9953_port_info_set_phy_address(i, phy_addr);
+			vsc9953_port_info_set_phy_int(i, phy_int);
+			vsc9953_port_enable(i);
+		}
 	}
 
+	/* Connect DTSEC1 to L2 switch if it doesn't have a PHY */
+	if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1) < 0)
+		vsc9953_port_enable(8);
+
+	/* Connect DTSEC2 to L2 switch if it doesn't have a PHY */
+	if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC2) < 0) {
+		/* Enable L2 On MAC2 using SCFG */
+		struct ccsr_scfg *scfg = (struct ccsr_scfg *)
+				CONFIG_SYS_MPC85xx_SCFG;
+
+		out_be32(&scfg->esgmiiselcr, in_be32(&scfg->esgmiiselcr) |
+			 (0x80000000));
+		vsc9953_port_enable(9);
+	}
+#endif
+
 	cpu_eth_init(bis);
 #endif
 
diff --git a/board/freescale/t4rdb/eth.c b/board/freescale/t4rdb/eth.c
index 142c6a8..879bd1a 100644
--- a/board/freescale/t4rdb/eth.c
+++ b/board/freescale/t4rdb/eth.c
@@ -101,7 +101,7 @@ int board_eth_init(bd_t *bis)
 	}
 
 #if (CONFIG_SYS_NUM_FMAN == 2)
-	if (srds_prtcl_s2 == 56) {
+	if ((srds_prtcl_s2 == 56) || (srds_prtcl_s2 == 55)) {
 		/* SGMII && XFI */
 		fm_info_set_phy_address(FM2_DTSEC1, SGMII_PHY_ADDR5);
 		fm_info_set_phy_address(FM2_DTSEC2, SGMII_PHY_ADDR6);
diff --git a/board/freescale/t4rdb/t4_rcw.cfg b/board/freescale/t4rdb/t4_rcw.cfg
index fdbbe5e..e46c7b2 100644
--- a/board/freescale/t4rdb/t4_rcw.cfg
+++ b/board/freescale/t4rdb/t4_rcw.cfg
@@ -1,7 +1,7 @@
 #PBL preamble and RCW header
 aa55aa55 010e0100
-#serdes protocol  27_56_1_9
+#serdes protocol  27_55_1_9
 16070019 18101916 00000000 00000000
-6c700848 00448c00 6c020000 f5000000
+6c6e0848 00448c00 6c020000 f5000000
 00000000 ee0000ee 00000000 000287fc
 00000000 50000000 00000000 00000028
diff --git a/configs/C29XPCIE_NOR_SECBOOT_defconfig b/configs/C29XPCIE_NOR_SECBOOT_defconfig
new file mode 100644
index 0000000..86751cf
--- /dev/null
+++ b/configs/C29XPCIE_NOR_SECBOOT_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SECURE_BOOT"
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_C29XPCIE=y
diff --git a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
new file mode 100644
index 0000000..d1a42b2
--- /dev/null
+++ b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH,SECURE_BOOT"
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_C29XPCIE=y
diff --git a/configs/P5040DS_SECURE_BOOT_defconfig b/configs/P5040DS_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..8e21ca5
--- /dev/null
+++ b/configs/P5040DS_SECURE_BOOT_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT"
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_P5040DS=y
diff --git a/configs/T1024QDS_defconfig b/configs/T1024QDS_defconfig
new file mode 100644
index 0000000..94a76ba
--- /dev/null
+++ b/configs/T1024QDS_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024"
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T102XQDS=y
diff --git a/configs/T1042RDB_SECURE_BOOT_defconfig b/configs/T1042RDB_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..c8dd5c2
--- /dev/null
+++ b/configs/T1042RDB_SECURE_BOOT_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,SECURE_BOOT,T1042RDB"
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T104XRDB=y
diff --git a/doc/README.t1040-l2switch b/doc/README.t1040-l2switch
new file mode 100644
index 0000000..14dbf31
--- /dev/null
+++ b/doc/README.t1040-l2switch
@@ -0,0 +1,48 @@
+This file contains information for VSC9953, a Vitesse L2 Switch IP
+which is integrated in the T1040/T1020 Freescale SoCs.
+
+About Device:
+=============
+VSC9953 is an 8-port Gigabit Ethernet switch supports the following features:
+	-	8192 MAC addresses
+	-	Static Address provisioning
+	-	Dynamic learning of MAC addresses and aging
+	-	4096 VLANs
+	-	Independent and shared VLAN learning (IVL, SVL)
+	-	Policing with storm control and MC/BC protection
+	-	IPv4 and IPv6 multicast
+	-	Jumbo frames (9.6 KB)
+	-	Access Control List
+	-	VLAN editing, translation and remarking
+	-	RMON counters per port
+
+Switch interfaces:
+	-	8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs
+	-	2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links)
+		to FMan ports (FM1@DTSEC1 and FM1@DTSEC2)
+
+Commands Overview:
+=============
+Commands supported
+	- enable/disable a port
+	- check a port's link speed, duplexity and status.
+
+Commands syntax
+	ethsw port <port_nr> enable|disable		- enable/disable an l2 switch port
+	ethsw port <port_nr> show			- show an l2 switch port's configuration
+
+	port_nr=0..9; use "all" for all ports
+
+=> ethsw port all show
+    Port   Status     Link    Speed   Duplex
+       0  enabled     down       10     half
+       1  enabled     down       10     half
+       2  enabled     down       10     half
+       3  enabled       up     1000     full
+       4 disabled     down        -     half
+       5 disabled     down        -     half
+       6 disabled     down        -     half
+       7 disabled     down        -     half
+       8  enabled       up     2500     full
+       9  enabled       up     2500     full
+=>
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index fb0cf8c..46c4ac6 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -66,3 +66,4 @@ obj-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o xilinx_ll_temac_mdio.o \
 		xilinx_ll_temac_fifo.o xilinx_ll_temac_sdma.o
 obj-$(CONFIG_ZYNQ_GEM) += zynq_gem.o
 obj-$(CONFIG_FSL_MC_ENET) += fsl_mc/
+obj-$(CONFIG_VSC9953) += vsc9953.o
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index f1e39b9..1d1089d 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -410,10 +410,15 @@ static int fm_eth_open(struct eth_device *dev, bd_t *bd)
 	fmc_tx_port_graceful_stop_disable(fm_eth);
 
 #ifdef CONFIG_PHYLIB
-	ret = phy_startup(fm_eth->phydev);
-	if (ret) {
-		printf("%s: Could not initialize\n", fm_eth->phydev->dev->name);
-		return ret;
+	if (fm_eth->phydev) {
+		ret = phy_startup(fm_eth->phydev);
+		if (ret) {
+			printf("%s: Could not initialize\n",
+			       fm_eth->phydev->dev->name);
+			return ret;
+		}
+	} else {
+		return 0;
 	}
 #else
 	fm_eth->phydev->speed = SPEED_1000;
@@ -447,7 +452,8 @@ static void fm_eth_halt(struct eth_device *dev)
 	/* disable bmi Rx port */
 	bmi_rx_port_disable(fm_eth->rx_port);
 
-	phy_shutdown(fm_eth->phydev);
+	if (fm_eth->phydev)
+		phy_shutdown(fm_eth->phydev);
 }
 
 static int fm_eth_send(struct eth_device *dev, void *buf, int len)
@@ -625,11 +631,12 @@ static int init_phy(struct eth_device *dev)
 	if (fm_eth->bus) {
 		phydev = phy_connect(fm_eth->bus, fm_eth->phyaddr, dev,
 					fm_eth->enet_if);
-	}
-
-	if (!phydev) {
-		printf("Failed to connect\n");
-		return -1;
+		if (!phydev) {
+			printf("Failed to connect\n");
+			return -1;
+		}
+	} else {
+		return 0;
 	}
 
 	if (fm_eth->type == FM_ETH_1G_E) {
@@ -711,8 +718,7 @@ int fm_eth_initialize(struct ccsr_fman *reg, struct fm_eth_info *info)
 	if (!fm_eth_startup(fm_eth))
 		return 0;
 
-	if (init_phy(dev))
-		return 0;
+	init_phy(dev);
 
 	/* clear the ethernet address */
 	for (i = 0; i < 6; i++)
diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c
index d2a097e..0458366 100644
--- a/drivers/net/fm/t1040.c
+++ b/drivers/net/fm/t1040.c
@@ -50,7 +50,8 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 	switch (port) {
 	case FM1_DTSEC1:
 	case FM1_DTSEC2:
-		if (is_serdes_configured(QSGMII_SW1_A + port - FM1_DTSEC1))
+		if (is_serdes_configured(QSGMII_SW1_A + port - FM1_DTSEC1) ||
+		    is_serdes_configured(SGMII_SW1_MAC1  + port - FM1_DTSEC1))
 			return PHY_INTERFACE_MODE_QSGMII;
 	case FM1_DTSEC3:
 	case FM1_DTSEC4:
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index f46bf00..d096db8 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MV88E6352_SWITCH) += mv88e6352.o
 
 obj-$(CONFIG_PHYLIB) += phy.o
 obj-$(CONFIG_PHYLIB_10G) += generic_10g.o
+obj-$(CONFIG_PHY_AQUANTIA) += aquantia.o
 obj-$(CONFIG_PHY_ATHEROS) += atheros.o
 obj-$(CONFIG_PHY_BROADCOM) += broadcom.o
 obj-$(CONFIG_PHY_CORTINA) += cortina.o
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
new file mode 100644
index 0000000..ef4da4e
--- /dev/null
+++ b/drivers/net/phy/aquantia.c
@@ -0,0 +1,156 @@
+/*
+ * Aquantia PHY drivers
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+#include <config.h>
+#include <common.h>
+#include <phy.h>
+
+#ifndef CONFIG_PHYLIB_10G
+#error The Aquantia PHY needs 10G support
+#endif
+
+#define AQUNTIA_10G_CTL		0x20
+#define AQUNTIA_VENDOR_P1	0xc400
+
+#define AQUNTIA_SPEED_LSB_MASK	0x2000
+#define AQUNTIA_SPEED_MSB_MASK	0x40
+
+int aquantia_config(struct phy_device *phydev)
+{
+	u32 val = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR);
+
+	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+		/* 1000BASE-T mode */
+		phydev->advertising = SUPPORTED_1000baseT_Full;
+		phydev->supported = phydev->advertising;
+
+		val = (val & ~AQUNTIA_SPEED_LSB_MASK) | AQUNTIA_SPEED_MSB_MASK;
+		phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val);
+	} else if (phydev->interface == PHY_INTERFACE_MODE_XGMII) {
+		/* 10GBASE-T mode */
+		phydev->advertising = SUPPORTED_10000baseT_Full;
+		phydev->supported = phydev->advertising;
+
+		if (!(val & AQUNTIA_SPEED_LSB_MASK) ||
+		    !(val & AQUNTIA_SPEED_MSB_MASK))
+			phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR,
+				  AQUNTIA_SPEED_LSB_MASK |
+				  AQUNTIA_SPEED_MSB_MASK);
+	} else if (phydev->interface == PHY_INTERFACE_MODE_SGMII_2500) {
+		/* 2.5GBASE-T mode */
+		phydev->advertising = SUPPORTED_1000baseT_Full;
+		phydev->supported = phydev->advertising;
+
+		phy_write(phydev, MDIO_MMD_AN, AQUNTIA_10G_CTL, 1);
+		phy_write(phydev, MDIO_MMD_AN, AQUNTIA_VENDOR_P1, 0x9440);
+	} else if (phydev->interface == PHY_INTERFACE_MODE_MII) {
+		/* 100BASE-TX mode */
+		phydev->advertising = SUPPORTED_100baseT_Full;
+		phydev->supported = phydev->advertising;
+
+		val = (val & ~AQUNTIA_SPEED_MSB_MASK) | AQUNTIA_SPEED_LSB_MASK;
+		phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val);
+	}
+	return 0;
+}
+
+int aquantia_startup(struct phy_device *phydev)
+{
+	u32 reg, speed;
+	int i = 0;
+
+	phydev->duplex = DUPLEX_FULL;
+
+	/* if the AN is still in progress, wait till timeout. */
+	phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
+	reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
+	if (!(reg & MDIO_AN_STAT1_COMPLETE)) {
+		printf("%s Waiting for PHY auto negotiation to complete",
+		       phydev->dev->name);
+		do {
+			udelay(1000);
+			reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
+			if ((i++ % 500) == 0)
+				printf(".");
+		} while (!(reg & MDIO_AN_STAT1_COMPLETE) &&
+			 i < (4 * PHY_ANEG_TIMEOUT));
+
+		if (i > PHY_ANEG_TIMEOUT)
+			printf(" TIMEOUT !\n");
+	}
+
+	/* Read twice because link state is latched and a
+	 * read moves the current state into the register */
+	phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
+	reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
+	if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
+		phydev->link = 0;
+	else
+		phydev->link = 1;
+
+	speed = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR);
+	if (speed & AQUNTIA_SPEED_MSB_MASK) {
+		if (speed & AQUNTIA_SPEED_LSB_MASK)
+			phydev->speed = SPEED_10000;
+		else
+			phydev->speed = SPEED_1000;
+	} else {
+		if (speed & AQUNTIA_SPEED_LSB_MASK)
+			phydev->speed = SPEED_100;
+		else
+			phydev->speed = SPEED_10;
+	}
+
+	return 0;
+}
+
+struct phy_driver aq1202_driver = {
+	.name = "Aquantia AQ1202",
+	.uid = 0x3a1b445,
+	.mask = 0xfffffff0,
+	.features = PHY_10G_FEATURES,
+	.mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
+			MDIO_MMD_PHYXS | MDIO_MMD_AN |
+			MDIO_MMD_VEND1),
+	.config = &aquantia_config,
+	.startup = &aquantia_startup,
+	.shutdown = &gen10g_shutdown,
+};
+
+struct phy_driver aq2104_driver = {
+	.name = "Aquantia AQ2104",
+	.uid = 0x3a1b460,
+	.mask = 0xfffffff0,
+	.features = PHY_10G_FEATURES,
+	.mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
+			MDIO_MMD_PHYXS | MDIO_MMD_AN |
+			MDIO_MMD_VEND1),
+	.config = &aquantia_config,
+	.startup = &aquantia_startup,
+	.shutdown = &gen10g_shutdown,
+};
+
+struct phy_driver aqr105_driver = {
+	.name = "Aquantia AQR105",
+	.uid = 0x3a1b4a2,
+	.mask = 0xfffffff0,
+	.features = PHY_10G_FEATURES,
+	.mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
+			MDIO_MMD_PHYXS | MDIO_MMD_AN |
+			MDIO_MMD_VEND1),
+	.config = &aquantia_config,
+	.startup = &aquantia_startup,
+	.shutdown = &gen10g_shutdown,
+};
+int phy_aquantia_init(void)
+{
+	phy_register(&aq1202_driver);
+	phy_register(&aq2104_driver);
+	phy_register(&aqr105_driver);
+
+	return 0;
+}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 5b04c85..df7e945 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -442,6 +442,9 @@ static LIST_HEAD(phy_drivers);
 
 int phy_init(void)
 {
+#ifdef CONFIG_PHY_AQUANTIA
+	phy_aquantia_init();
+#endif
 #ifdef CONFIG_PHY_ATHEROS
 	phy_atheros_init();
 #endif
diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c
new file mode 100644
index 0000000..9fc3c18
--- /dev/null
+++ b/drivers/net/vsc9953.c
@@ -0,0 +1,497 @@
+/*
+ *  Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ *  SPDX-License-Identifier:      GPL-2.0+
+ *
+ *  Driver for the Vitesse VSC9953 L2 Switch
+ */
+
+#include <asm/io.h>
+#include <asm/fsl_serdes.h>
+#include <fm_eth.h>
+#include <asm/fsl_memac.h>
+#include <vsc9953.h>
+
+static struct vsc9953_info vsc9953_l2sw = {
+		.port[0] = VSC9953_PORT_INFO_INITIALIZER(0),
+		.port[1] = VSC9953_PORT_INFO_INITIALIZER(1),
+		.port[2] = VSC9953_PORT_INFO_INITIALIZER(2),
+		.port[3] = VSC9953_PORT_INFO_INITIALIZER(3),
+		.port[4] = VSC9953_PORT_INFO_INITIALIZER(4),
+		.port[5] = VSC9953_PORT_INFO_INITIALIZER(5),
+		.port[6] = VSC9953_PORT_INFO_INITIALIZER(6),
+		.port[7] = VSC9953_PORT_INFO_INITIALIZER(7),
+		.port[8] = VSC9953_PORT_INFO_INITIALIZER(8),
+		.port[9] = VSC9953_PORT_INFO_INITIALIZER(9),
+};
+
+void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus)
+{
+	if (!VSC9953_PORT_CHECK(port))
+		return;
+
+	vsc9953_l2sw.port[port].bus = bus;
+}
+
+void vsc9953_port_info_set_phy_address(int port, int address)
+{
+	if (!VSC9953_PORT_CHECK(port))
+		return;
+
+	vsc9953_l2sw.port[port].phyaddr = address;
+}
+
+void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int)
+{
+	if (!VSC9953_PORT_CHECK(port))
+		return;
+
+	vsc9953_l2sw.port[port].enet_if = phy_int;
+}
+
+void vsc9953_port_enable(int port)
+{
+	if (!VSC9953_PORT_CHECK(port))
+		return;
+
+	vsc9953_l2sw.port[port].enabled = 1;
+}
+
+void vsc9953_port_disable(int port)
+{
+	if (!VSC9953_PORT_CHECK(port))
+		return;
+
+	vsc9953_l2sw.port[port].enabled = 0;
+}
+
+static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr,
+		int regnum, int value)
+{
+	int			timeout = 50000;
+
+	out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) |
+			((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) |
+			(0x1 << 1));
+	asm("sync");
+
+	while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout)
+		udelay(1);
+
+	if (timeout == 0)
+		debug("Timeout waiting for MDIO write\n");
+}
+
+static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr,
+		int regnum)
+{
+	int			value = 0xFFFF;
+	int			timeout = 50000;
+
+	while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout)
+		udelay(1);
+	if (timeout == 0) {
+		debug("Timeout waiting for MDIO operation to finish\n");
+		return value;
+	}
+
+	/* Put the address of the phy, and the register
+	 * number into MIICMD
+	 */
+	out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) |
+			((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) |
+			(0x2 << 1));
+
+	timeout = 50000;
+	/* Wait for the the indication that the read is done */
+	while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout)
+		udelay(1);
+	if (timeout == 0)
+		debug("Timeout waiting for MDIO read\n");
+
+	/* Grab the value read from the PHY */
+	value = in_le32(&phyregs->miimdata);
+
+	if ((value & 0x00030000) == 0)
+		return value & 0x0000ffff;
+
+	return value;
+}
+
+static int init_phy(struct eth_device *dev)
+{
+	struct vsc9953_port_info	*l2sw_port = dev->priv;
+	struct phy_device		*phydev = NULL;
+
+#ifdef CONFIG_PHYLIB
+	if (!l2sw_port->bus)
+		return 0;
+	phydev = phy_connect(l2sw_port->bus, l2sw_port->phyaddr, dev,
+			l2sw_port->enet_if);
+	if (!phydev) {
+		printf("Failed to connect\n");
+		return -1;
+	}
+
+	phydev->supported &= SUPPORTED_10baseT_Half |
+			SUPPORTED_10baseT_Full |
+			SUPPORTED_100baseT_Half |
+			SUPPORTED_100baseT_Full |
+			SUPPORTED_1000baseT_Full;
+	phydev->advertising = phydev->supported;
+
+	l2sw_port->phydev = phydev;
+
+	phy_config(phydev);
+#endif
+
+	return 0;
+}
+
+static int vsc9953_port_init(int port)
+{
+	struct eth_device		*dev;
+
+	/* Internal ports never have a PHY */
+	if (VSC9953_INTERNAL_PORT_CHECK(port))
+		return 0;
+
+	/* alloc eth device */
+	dev = (struct eth_device *)calloc(1, sizeof(struct eth_device));
+	if (!dev)
+		return 1;
+
+	sprintf(dev->name, "SW@PORT%d", port);
+	dev->priv = &vsc9953_l2sw.port[port];
+	dev->init = NULL;
+	dev->halt = NULL;
+	dev->send = NULL;
+	dev->recv = NULL;
+
+	if (init_phy(dev)) {
+		free(dev);
+		return 1;
+	}
+
+	return 0;
+}
+
+void vsc9953_init(bd_t *bis)
+{
+	u32				i, hdx_cfg = 0, phy_addr = 0;
+	int				timeout;
+	struct vsc9953_system_reg	*l2sys_reg;
+	struct vsc9953_qsys_reg		*l2qsys_reg;
+	struct vsc9953_dev_gmii		*l2dev_gmii_reg;
+	struct vsc9953_analyzer		*l2ana_reg;
+	struct vsc9953_devcpu_gcb	*l2dev_gcb;
+
+	l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET +
+			VSC9953_DEV_GMII_OFFSET);
+
+	l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET +
+			VSC9953_ANA_OFFSET);
+
+	l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET +
+			VSC9953_SYS_OFFSET);
+
+	l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
+			VSC9953_QSYS_OFFSET);
+
+	l2dev_gcb = (struct vsc9953_devcpu_gcb *)(VSC9953_OFFSET +
+			VSC9953_DEVCPU_GCB);
+
+	out_le32(&l2dev_gcb->chip_regs.soft_rst,
+		 CONFIG_VSC9953_SOFT_SWC_RST_ENA);
+	timeout = 50000;
+	while ((in_le32(&l2dev_gcb->chip_regs.soft_rst) &
+			CONFIG_VSC9953_SOFT_SWC_RST_ENA) && --timeout)
+		udelay(1); /* busy wait for vsc9953 soft reset */
+	if (timeout == 0)
+		debug("Timeout waiting for VSC9953 to reset\n");
+
+	out_le32(&l2sys_reg->sys.reset_cfg, CONFIG_VSC9953_MEM_ENABLE |
+		 CONFIG_VSC9953_MEM_INIT);
+
+	timeout = 50000;
+	while ((in_le32(&l2sys_reg->sys.reset_cfg) &
+		CONFIG_VSC9953_MEM_INIT) && --timeout)
+		udelay(1); /* busy wait for vsc9953 memory init */
+	if (timeout == 0)
+		debug("Timeout waiting for VSC9953 memory to initialize\n");
+
+	out_le32(&l2sys_reg->sys.reset_cfg, (in_le32(&l2sys_reg->sys.reset_cfg)
+			| CONFIG_VSC9953_CORE_ENABLE));
+
+	/* VSC9953 Setting to be done once only */
+	out_le32(&l2qsys_reg->sys.ext_cpu_cfg, 0x00000b00);
+
+	for (i = 0; i < VSC9953_MAX_PORTS; i++) {
+		if (vsc9953_port_init(i))
+			printf("Failed to initialize l2switch port %d\n", i);
+
+		/* Enable VSC9953 GMII Ports Port ID 0 - 7 */
+		if (VSC9953_INTERNAL_PORT_CHECK(i)) {
+			out_le32(&l2ana_reg->pfc[i].pfc_cfg,
+				 CONFIG_VSC9953_PFC_FC_QSGMII);
+			out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i],
+				 CONFIG_VSC9953_MAC_FC_CFG_QSGMII);
+		} else {
+			out_le32(&l2ana_reg->pfc[i].pfc_cfg,
+				 CONFIG_VSC9953_PFC_FC);
+			out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i],
+				 CONFIG_VSC9953_MAC_FC_CFG);
+		}
+		out_le32(&l2dev_gmii_reg->port_mode.clock_cfg,
+			 CONFIG_VSC9953_CLOCK_CFG);
+		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg,
+			 CONFIG_VSC9953_MAC_ENA_CFG);
+		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_mode_cfg,
+			 CONFIG_VSC9953_MAC_MODE_CFG);
+		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ifg_cfg,
+			 CONFIG_VSC9953_MAC_IFG_CFG);
+		/* mac_hdx_cfg varies with port id*/
+		hdx_cfg = (CONFIG_VSC9953_MAC_HDX_CFG | (i << 16));
+		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_hdx_cfg, hdx_cfg);
+		out_le32(&l2sys_reg->sys.front_port_mode[i],
+			 CONFIG_VSC9953_FRONT_PORT_MODE);
+		out_le32(&l2qsys_reg->sys.switch_port_mode[i],
+			 CONFIG_VSC9953_PORT_ENA);
+		out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_maxlen_cfg,
+			 CONFIG_VSC9953_MAC_MAX_LEN);
+		out_le32(&l2sys_reg->pause_cfg.pause_cfg[i],
+			 CONFIG_VSC9953_PAUSE_CFG);
+		/* WAIT FOR 2 us*/
+		udelay(2);
+
+		l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(
+				(char *)l2dev_gmii_reg
+				+ T1040_SWITCH_GMII_DEV_OFFSET);
+
+		/* Initialize Lynx PHY Wrappers */
+		phy_addr = 0;
+		if (vsc9953_l2sw.port[i].enet_if ==
+				PHY_INTERFACE_MODE_QSGMII)
+			phy_addr = (i + 0x4) & 0x1F;
+		else if (vsc9953_l2sw.port[i].enet_if ==
+				PHY_INTERFACE_MODE_SGMII)
+			phy_addr = (i + 1) & 0x1F;
+
+		if (phy_addr) {
+			/* SGMII IF mode + AN enable */
+			vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
+					   0x14, PHY_SGMII_IF_MODE_AN |
+					   PHY_SGMII_IF_MODE_SGMII);
+			/* Dev ability according to SGMII specification */
+			vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
+					   0x4, PHY_SGMII_DEV_ABILITY_SGMII);
+			/* Adjust link timer for SGMII
+			 * 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40
+			 */
+			vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
+					   0x13, 0x0003);
+			vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
+					   0x12, 0x0d40);
+			/* Restart AN */
+			vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr,
+					   0x0, PHY_SGMII_CR_DEF_VAL |
+					   PHY_SGMII_CR_RESET_AN);
+
+			timeout = 50000;
+			while ((vsc9953_mdio_read(&l2dev_gcb->mii_mng[0],
+					phy_addr, 0x01) & 0x0020) && --timeout)
+				udelay(1); /* wait for AN to complete */
+			if (timeout == 0)
+				debug("Timeout waiting for AN to complete\n");
+		}
+	}
+
+	printf("VSC9953 L2 switch initialized\n");
+	return;
+}
+
+#ifdef CONFIG_VSC9953_CMD
+/* Enable/disable status of a VSC9953 port */
+static void vsc9953_port_status_set(int port_nr, u8 enabled)
+{
+	u32			val;
+	struct vsc9953_qsys_reg	*l2qsys_reg;
+
+	/* Administrative down */
+	if (vsc9953_l2sw.port[port_nr].enabled == 0)
+		return;
+
+	l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
+			VSC9953_QSYS_OFFSET);
+
+	val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_nr]);
+	if (enabled == 1)
+		val |= (1 << 13);
+	else
+		val &= ~(1 << 13);
+
+	out_le32(&l2qsys_reg->sys.switch_port_mode[port_nr], val);
+}
+
+/* Set all VSC9953 ports' status */
+static void vsc9953_port_all_status_set(u8 enabled)
+{
+	int		i;
+
+	for (i = 0; i < VSC9953_MAX_PORTS; i++)
+		vsc9953_port_status_set(i, enabled);
+}
+
+/* Start autonegotiation for a VSC9953 PHY */
+static void vsc9953_phy_autoneg(int port_nr)
+{
+	if (!vsc9953_l2sw.port[port_nr].phydev)
+		return;
+
+	if (vsc9953_l2sw.port[port_nr].phydev->drv->startup(
+			vsc9953_l2sw.port[port_nr].phydev))
+		printf("Failed to start PHY for port %d\n", port_nr);
+}
+
+/* Start autonegotiation for all VSC9953 PHYs */
+static void vsc9953_phy_all_autoneg(void)
+{
+	int		i;
+
+	for (i = 0; i < VSC9953_MAX_PORTS; i++)
+		vsc9953_phy_autoneg(i);
+}
+
+/* Print a VSC9953 port's configuration */
+static void vsc9953_port_config_show(int port)
+{
+	int			speed;
+	int			duplex;
+	int			link;
+	u8			enabled;
+	u32			val;
+	struct vsc9953_qsys_reg	*l2qsys_reg;
+
+	l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET +
+			VSC9953_QSYS_OFFSET);
+
+	val = in_le32(&l2qsys_reg->sys.switch_port_mode[port]);
+	enabled = vsc9953_l2sw.port[port].enabled &
+			((val & 0x00002000) >> 13);
+
+	/* internal ports (8 and 9) are fixed */
+	if (VSC9953_INTERNAL_PORT_CHECK(port)) {
+		link = 1;
+		speed = SPEED_2500;
+		duplex = DUPLEX_FULL;
+	} else {
+		if (vsc9953_l2sw.port[port].phydev) {
+			link = vsc9953_l2sw.port[port].phydev->link;
+			speed = vsc9953_l2sw.port[port].phydev->speed;
+			duplex = vsc9953_l2sw.port[port].phydev->duplex;
+		} else {
+			link = -1;
+			speed = -1;
+			duplex = -1;
+		}
+	}
+
+	printf("%8d ", port);
+	printf("%8s ", enabled == 1 ? "enabled" : "disabled");
+	printf("%8s ", link == 1 ? "up" : "down");
+
+	switch (speed) {
+	case SPEED_10:
+		printf("%8d ", 10);
+		break;
+	case SPEED_100:
+		printf("%8d ", 100);
+		break;
+	case SPEED_1000:
+		printf("%8d ", 1000);
+		break;
+	case SPEED_2500:
+		printf("%8d ", 2500);
+		break;
+	case SPEED_10000:
+		printf("%8d ", 10000);
+		break;
+	default:
+		printf("%8s ", "-");
+	}
+
+	printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half");
+}
+
+/* Print VSC9953 ports' configuration */
+static void vsc9953_port_all_config_show(void)
+{
+	int		i;
+
+	for (i = 0; i < VSC9953_MAX_PORTS; i++)
+		vsc9953_port_config_show(i);
+}
+
+/* function to interpret commands starting with "ethsw " */
+static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	u8 enable;
+	u32 port;
+
+	if (argc < 4)
+		return -1;
+
+	if (strcmp(argv[1], "port"))
+		return -1;
+
+	if (!strcmp(argv[3], "show")) {
+		if (!strcmp(argv[2], "all")) {
+			vsc9953_phy_all_autoneg();
+			printf("%8s %8s %8s %8s %8s\n",
+			       "Port", "Status", "Link", "Speed",
+			       "Duplex");
+			vsc9953_port_all_config_show();
+			return 0;
+		} else {
+			port = simple_strtoul(argv[2], NULL, 10);
+			if (!VSC9953_PORT_CHECK(port))
+				return -1;
+			vsc9953_phy_autoneg(port);
+			printf("%8s %8s %8s %8s %8s\n",
+			       "Port", "Status", "Link", "Speed",
+			       "Duplex");
+			vsc9953_port_config_show(port);
+			return 0;
+		}
+	} else if (!strcmp(argv[3], "enable")) {
+		enable = 1;
+	} else if (!strcmp(argv[3], "disable")) {
+		enable = 0;
+	} else {
+		return -1;
+	}
+
+	if (!strcmp(argv[2], "all")) {
+		vsc9953_port_all_status_set(enable);
+		return 0;
+	} else {
+		port = simple_strtoul(argv[2], NULL, 10);
+		if (!VSC9953_PORT_CHECK(port))
+			return -1;
+		vsc9953_port_status_set(port, enable);
+		return 0;
+	}
+
+	return -1;
+}
+
+U_BOOT_CMD(ethsw, 5, 0, do_ethsw,
+	   "vsc9953 l2 switch commands",
+	   "port <port_nr> enable|disable\n"
+	   "    - enable/disable an l2 switch port\n"
+	   "      port_nr=0..9; use \"all\" for all ports\n"
+	   "ethsw port <port_nr> show\n"
+	   "    - show an l2 switch port's configuration\n"
+	   "      port_nr=0..9; use \"all\" for all ports\n"
+);
+#endif /* CONFIG_VSC9953_CMD */
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index eeb0671..6aaaaa4 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -433,6 +433,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_UBOOTPATH	"u-boot.bin" /* U-Boot image on TFTP server */
 
 #define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTDELAY	10 /* -1 disable auto-boot */
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"netdev=eth0\0"						\
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index e8a8d29..59a8d1b 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -675,6 +675,7 @@ combinations. this should be removed later
 #define CONFIG_UBOOTPATH	"u-boot.bin"
 
 #define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTDELAY	10 /* -1 disable auto-boot */
 
 #ifdef CONFIG_SDCARD
 #define CONFIG_DEF_HWCONFIG	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index ecb3d7b..e24b923 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -581,4 +581,6 @@
 
 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 
+#include <asm/fsl_secure_boot.h>
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index c2bdbb9..3f02ced 100644
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -35,7 +35,10 @@
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_DEEP_SLEEP
+#if defined(CONFIG_DEEP_SLEEP)
 #define CONFIG_SILENT_CONSOLE
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 82b669b..bd40d6a 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -36,7 +36,10 @@
 
 /* support deep sleep */
 #define CONFIG_DEEP_SLEEP
+#if defined(CONFIG_DEEP_SLEEP)
 #define CONFIG_SILENT_CONSOLE
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
@@ -51,7 +54,7 @@
 #define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_FSL_LAW			/* Use common FSL init code */
-#define CONFIG_SYS_TEXT_BASE		0x00201000
+#define CONFIG_SYS_TEXT_BASE		0x30001000
 #define CONFIG_SPL_TEXT_BASE		0xFFFD8000
 #define CONFIG_SPL_PAD_TO		0x40000
 #define CONFIG_SPL_MAX_SIZE		0x28000
@@ -67,21 +70,21 @@
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(768 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST	0x00200000
-#define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_DST	0x30000000
+#define CONFIG_SYS_NAND_U_BOOT_START	0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 << 10)
 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_RESET_VECTOR_ADDRESS		0x200FFC
+#define CONFIG_RESET_VECTOR_ADDRESS		0x30000FFC
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x00200000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x00200000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x30000000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x30000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(256 << 10)
 #define CONFIG_SYS_LDSCRIPT		"arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #ifndef CONFIG_SPL_BUILD
@@ -91,12 +94,12 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_RESET_VECTOR_ADDRESS	0x200FFC
+#define CONFIG_RESET_VECTOR_ADDRESS	0x30000FFC
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST	(0x00200000)
-#define CONFIG_SYS_MMC_U_BOOT_START	(0x00200000)
+#define CONFIG_SYS_MMC_U_BOOT_DST	(0x30000000)
+#define CONFIG_SYS_MMC_U_BOOT_START	(0x30000000)
 #define CONFIG_SYS_MMC_U_BOOT_OFFS	(260 << 10)
 #define CONFIG_SYS_LDSCRIPT		"arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #ifndef CONFIG_SPL_BUILD
@@ -759,8 +762,10 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FMAN_ENET
 #define CONFIG_PHYLIB_10G
 #define CONFIG_PHY_REALTEK
+#define CONFIG_PHY_AQUANTIA
 #define RGMII_PHY1_ADDR		0x2
 #define RGMII_PHY2_ADDR		0x6
+#define SGMII_PHY1_ADDR		0x2
 #define FM1_10GEC1_PHY_ADDR	0x1
 #endif
 
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index b70bdfe..92f5f56 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -47,7 +47,10 @@
 
 /* support deep sleep */
 #define CONFIG_DEEP_SLEEP
+#if defined(CONFIG_DEEP_SLEEP)
 #define CONFIG_SILENT_CONSOLE
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xeff40000
@@ -689,6 +692,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
 #endif
 
+/* Enable VSC9953 L2 Switch driver */
+#define CONFIG_VSC9953
+#define CONFIG_VSC9953_CMD
+#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR	0x14
+#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR	0x18
+
 /*
  * Dynamic MTD Partition support with mtdparts
  */
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 57cdf72..d47f1be 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -726,6 +726,14 @@
 #define CONFIG_SYS_RGMII1_PHY_ADDR		0x01
 #define CONFIG_SYS_RGMII2_PHY_ADDR		0x02
 
+/* Enable VSC9953 L2 Switch driver on T1040 SoC */
+#ifdef CONFIG_T1040RDB
+#define CONFIG_VSC9953
+#define CONFIG_VSC9953_CMD
+#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR	0x04
+#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR	0x08
+#endif
+
 #define CONFIG_MII		/* MII PHY management */
 #define CONFIG_ETHPRIME		"FM1@DTSEC4"
 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
diff --git a/include/phy.h b/include/phy.h
index 1e282e2..d117fc1 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -225,6 +225,7 @@ int gen10g_startup(struct phy_device *phydev);
 int gen10g_shutdown(struct phy_device *phydev);
 int gen10g_discover_mmds(struct phy_device *phydev);
 
+int phy_aquantia_init(void);
 int phy_atheros_init(void);
 int phy_broadcom_init(void);
 int phy_cortina_init(void);
diff --git a/include/vsc9953.h b/include/vsc9953.h
new file mode 100644
index 0000000..3d11b87
--- /dev/null
+++ b/include/vsc9953.h
@@ -0,0 +1,402 @@
+/*
+ *  vsc9953.h
+ *
+ *  Driver for the Vitesse VSC9953 L2 Switch
+ *
+ *  This software may be used and distributed according to the
+ *  terms of the GNU Public License, Version 2, incorporated
+ *  herein by reference.
+ *
+ * Copyright 2013  Freescale Semiconductor, Inc.
+ *
+ */
+
+#ifndef _VSC9953_H_
+#define _VSC9953_H_
+
+#include <config.h>
+#include <miiphy.h>
+#include <asm/types.h>
+#include <malloc.h>
+
+#define VSC9953_OFFSET			(CONFIG_SYS_CCSRBAR_DEFAULT + 0x800000)
+
+#define VSC9953_SYS_OFFSET		0x010000
+#define VSC9953_DEV_GMII_OFFSET		0x100000
+#define VSC9953_QSYS_OFFSET		0x200000
+#define VSC9953_ANA_OFFSET		0x280000
+#define VSC9953_DEVCPU_GCB		0x070000
+#define VSC9953_ES0			0x040000
+#define VSC9953_IS1			0x050000
+#define VSC9953_IS2			0x060000
+
+#define T1040_SWITCH_GMII_DEV_OFFSET	0x010000
+#define VSC9953_PHY_REGS_OFFST		0x0000AC
+
+#define CONFIG_VSC9953_SOFT_SWC_RST_ENA	0x00000001
+#define CONFIG_VSC9953_CORE_ENABLE	0x80
+#define CONFIG_VSC9953_MEM_ENABLE	0x40
+#define CONFIG_VSC9953_MEM_INIT		0x20
+
+#define CONFIG_VSC9953_PORT_ENA		0x00003a00
+#define CONFIG_VSC9953_MAC_ENA_CFG	0x00000011
+#define CONFIG_VSC9953_MAC_MODE_CFG	0x00000011
+#define CONFIG_VSC9953_MAC_IFG_CFG	0x00000515
+#define CONFIG_VSC9953_MAC_HDX_CFG	0x00001043
+#define CONFIG_VSC9953_CLOCK_CFG	0x00000001
+#define CONFIG_VSC9953_CLOCK_CFG_1000M	0x00000001
+#define CONFIG_VSC9953_PFC_FC		0x00000001
+#define CONFIG_VSC9953_PFC_FC_QSGMII	0x00000000
+#define CONFIG_VSC9953_MAC_FC_CFG	0x04700000
+#define CONFIG_VSC9953_MAC_FC_CFG_QSGMII	0x00700000
+#define CONFIG_VSC9953_PAUSE_CFG	0x001ffffe
+#define CONFIG_VSC9953_TOT_TAIL_DROP_LVL	0x000003ff
+#define CONFIG_VSC9953_FRONT_PORT_MODE	0x00000000
+#define CONFIG_VSC9953_MAC_MAX_LEN	0x000005ee
+
+#define	CONFIG_VSC9953_VCAP_MV_CFG	0x0000ffff
+#define	CONFIG_VSC9953_VCAP_UPDATE_CTRL	0x01000004
+#define VSC9953_MAX_PORTS		10
+#define VSC9953_PORT_CHECK(port)	\
+	(((port) < 0 || (port) >= VSC9953_MAX_PORTS) ? 0 : 1)
+#define VSC9953_INTERNAL_PORT_CHECK(port) ( \
+	( \
+		(port) < VSC9953_MAX_PORTS - 2 || (port) >= VSC9953_MAX_PORTS \
+	) ? 0 : 1 \
+)
+
+#define DEFAULT_VSC9953_MDIO_NAME	"VSC9953_MDIO0"
+
+#define MIIMIND_OPR_PEND		0x00000004
+
+struct vsc9953_mdio_info {
+	struct vsc9953_mii_mng	*regs;
+	char	*name;
+};
+
+/* VSC9953 ANA structure for T1040 U-boot*/
+
+struct	vsc9953_ana_port {
+	u32	vlan_cfg;
+	u32	drop_cfg;
+	u32	qos_cfg;
+	u32	vcap_cfg;
+	u32	vcap_s1_key_cfg[3];
+	u32	vcap_s2_cfg;
+	u32	qos_pcp_dei_map_cfg[16];
+	u32	cpu_fwd_cfg;
+	u32	cpu_fwd_bpdu_cfg;
+	u32	cpu_fwd_garp_cfg;
+	u32	cpu_fwd_ccm_cfg;
+	u32	port_cfg;
+	u32	pol_cfg;
+	u32	reserved[34];
+};
+
+struct vsc9953_ana_pol {
+	u32	pol_pir_cfg;
+	u32	pol_cir_cfg;
+	u32	pol_mode_cfg;
+	u32	pol_pir_state;
+	u32	pol_cir_state;
+	u32	reserved1[3];
+};
+
+struct vsc9953_ana_ana_tables {
+	u32	entry_lim[11];
+	u32	an_moved;
+	u32	mach_data;
+	u32	macl_data;
+	u32	mac_access;
+	u32	mact_indx;
+	u32	vlan_access;
+	u32	vlan_tidx;
+};
+
+struct vsc9953_ana_ana {
+	u32	adv_learn;
+	u32	vlan_mask;
+	u32	anag_efil;
+	u32	an_events;
+	u32	storm_limit_burst;
+	u32	storm_limit_cfg[4];
+	u32	isolated_prts;
+	u32	community_ports;
+	u32	auto_age;
+	u32	mac_options;
+	u32	learn_disc;
+	u32	agen_ctrl;
+	u32	mirror_ports;
+	u32	emirror_ports;
+	u32	flooding;
+	u32	flooding_ipmc;
+	u32	sflow_cfg[11];
+	u32	port_mode[12];
+};
+
+struct vsc9953_ana_pgid {
+	u32	port_grp_id[91];
+};
+
+struct	vsc9953_ana_pfc {
+	u32	pfc_cfg;
+	u32	reserved1[15];
+};
+
+struct vsc9953_ana_pol_misc {
+	u32	pol_flowc[10];
+	u32	reserved1[17];
+	u32	pol_hyst;
+};
+
+struct	vsc9953_ana_common {
+	u32	aggr_cfg;
+	u32	cpuq_cfg;
+	u32	cpuq_8021_cfg;
+	u32	dscp_cfg;
+	u32	dscp_rewr_cfg;
+	u32	vcap_rng_type_cfg;
+	u32	vcap_rng_val_cfg;
+	u32	discard_cfg;
+	u32	fid_cfg;
+};
+
+struct vsc9953_analyzer {
+	struct vsc9953_ana_port	port[11];
+	u32	reserved1[9536];
+	struct vsc9953_ana_pol	pol[164];
+	struct vsc9953_ana_ana_tables	ana_tables;
+	u32	reserved2[14];
+	struct vsc9953_ana_ana	ana;
+	u32	reserved3[22];
+	struct vsc9953_ana_pgid	port_id_tbl;
+	u32	reserved4[549];
+	struct vsc9953_ana_pfc	pfc[10];
+	struct vsc9953_ana_pol_misc	pol_misc;
+	u32	reserved5[196];
+	struct vsc9953_ana_common	common;
+};
+/* END VSC9953 ANA structure for T1040 U-boot*/
+
+/* VSC9953 DEV_GMII structure for T1040 U-boot*/
+
+struct	vsc9953_dev_gmii_port_mode {
+	u32	clock_cfg;
+	u32	port_misc;
+	u32	reserved1;
+	u32	eee_cfg;
+};
+
+struct	vsc9953_dev_gmii_mac_cfg_status {
+	u32	mac_ena_cfg;
+	u32	mac_mode_cfg;
+	u32	mac_maxlen_cfg;
+	u32	mac_tags_cfg;
+	u32	mac_adv_chk_cfg;
+	u32	mac_ifg_cfg;
+	u32	mac_hdx_cfg;
+	u32	mac_fc_mac_low_cfg;
+	u32	mac_fc_mac_high_cfg;
+	u32	mac_sticky;
+};
+
+struct vsc9953_dev_gmii {
+	struct vsc9953_dev_gmii_port_mode	port_mode;
+	struct vsc9953_dev_gmii_mac_cfg_status	mac_cfg_status;
+};
+
+/* END VSC9953 DEV_GMII structure for T1040 U-boot*/
+
+/* VSC9953 QSYS structure for T1040 U-boot*/
+
+struct	vsc9953_qsys_hsch {
+	u32	cir_cfg;
+	u32	reserved1;
+	u32	se_cfg;
+	u32	se_dwrr_cfg[8];
+	u32	cir_state;
+	u32	reserved2[20];
+};
+
+struct	vsc9953_qsys_sys {
+	u32	port_mode[12];
+	u32	switch_port_mode[11];
+	u32	stat_cnt_cfg;
+	u32	eee_cfg[10];
+	u32	eee_thrs;
+	u32	igr_no_sharing;
+	u32	egr_no_sharing;
+	u32	sw_status[11];
+	u32	ext_cpu_cfg;
+	u32	cpu_group_map;
+	u32	reserved1[23];
+};
+
+struct	vsc9953_qsys_qos_cfg {
+	u32	red_profile[16];
+	u32	res_qos_mode;
+};
+
+struct	vsc9953_qsys_drop_cfg {
+	u32	egr_drop_mode;
+};
+
+struct	vsc9953_qsys_mmgt {
+	u32	eq_cntrl;
+	u32	reserved1;
+};
+
+struct	vsc9953_qsys_hsch_misc {
+	u32	hsch_misc_cfg;
+	u32	reserved1[546];
+};
+
+struct	vsc9953_qsys_res_ctrl {
+	u32	res_cfg;
+	u32	res_stat;
+
+};
+
+struct	vsc9953_qsys_reg {
+	struct vsc9953_qsys_hsch	hsch[108];
+	struct vsc9953_qsys_sys	sys;
+	struct vsc9953_qsys_qos_cfg	qos_cfg;
+	struct vsc9953_qsys_drop_cfg	drop_cfg;
+	struct vsc9953_qsys_mmgt	mmgt;
+	struct vsc9953_qsys_hsch_misc	hsch_misc;
+	struct vsc9953_qsys_res_ctrl	res_ctrl[1024];
+};
+
+/* END VSC9953 QSYS structure for T1040 U-boot*/
+
+/* VSC9953 SYS structure for T1040 U-boot*/
+
+struct	vsc9953_sys_stat {
+	u32	rx_cntrs[64];
+	u32	tx_cntrs[64];
+	u32	drop_cntrs[64];
+	u32	reserved1[6];
+};
+
+struct	vsc9953_sys_sys {
+	u32	reset_cfg;
+	u32	reserved1;
+	u32	vlan_etype_cfg;
+	u32	port_mode[12];
+	u32	front_port_mode[10];
+	u32	frame_aging;
+	u32	stat_cfg;
+	u32	reserved2[50];
+};
+
+struct	vsc9953_sys_pause_cfg {
+	u32	pause_cfg[11];
+	u32	pause_tot_cfg;
+	u32	tail_drop_level[11];
+	u32	tot_tail_drop_lvl;
+	u32	mac_fc_cfg[10];
+};
+
+struct	vsc9953_sys_mmgt {
+	u16	free_cnt;
+};
+
+struct	vsc9953_system_reg {
+	struct vsc9953_sys_stat	stat;
+	struct vsc9953_sys_sys	sys;
+	struct vsc9953_sys_pause_cfg	pause_cfg;
+	struct vsc9953_sys_mmgt	mmgt;
+};
+
+/* END VSC9953 SYS structure for T1040 U-boot*/
+
+
+/* VSC9953 DEVCPU_GCB structure for T1040 U-boot*/
+
+struct	vsc9953_chip_regs {
+	u32	chipd_id;
+	u32	gpr;
+	u32	soft_rst;
+};
+
+struct	vsc9953_gpio {
+	u32	gpio_out_set[10];
+	u32	gpio_out_clr[10];
+	u32	gpio_out[10];
+	u32	gpio_in[10];
+};
+
+struct vsc9953_mii_mng {
+	u32	miimstatus;
+	u32	reserved1;
+	u32	miimcmd;
+	u32	miimdata;
+	u32	miimcfg;
+	u32	miimscan_0;
+	u32	miimscan_1;
+	u32	miiscan_lst_rslts;
+	u32	miiscan_lst_rslts_valid;
+};
+
+struct	vsc9953_mii_read_scan {
+	u32	mii_scan_results_sticky[2];
+};
+
+struct	vsc9953_devcpu_gcb {
+	struct vsc9953_chip_regs	chip_regs;
+	struct vsc9953_gpio		gpio;
+	struct vsc9953_mii_mng	mii_mng[2];
+	struct vsc9953_mii_read_scan	mii_read_scan;
+};
+
+/* END VSC9953 DEVCPU_GCB structure for T1040 U-boot*/
+
+/* VSC9953 IS* structure for T1040 U-boot*/
+
+struct	vsc9953_vcap_core_cfg	{
+	u32	vcap_update_ctrl;
+	u32	vcap_mv_cfg;
+};
+
+struct	vsc9953_vcap {
+struct	vsc9953_vcap_core_cfg	vcap_core_cfg;
+};
+
+/* END VSC9953 IS* structure for T1040 U-boot*/
+
+#define VSC9953_PORT_INFO_INITIALIZER(idx) \
+{									\
+	.enabled	= 0,						\
+	.phyaddr	= 0,						\
+	.index		= idx,						\
+	.phy_regs	= NULL,						\
+	.enet_if	= PHY_INTERFACE_MODE_NONE,			\
+	.bus		= NULL,						\
+	.phydev		= NULL,						\
+}
+
+/* Structure to describe a VSC9953 port */
+struct vsc9953_port_info {
+	u8	enabled;
+	u8	phyaddr;
+	int	index;
+	void	*phy_regs;
+	phy_interface_t	enet_if;
+	struct mii_dev	*bus;
+	struct phy_device	*phydev;
+};
+
+/* Structure to describe a VSC9953 switch */
+struct vsc9953_info {
+	struct	vsc9953_port_info	port[VSC9953_MAX_PORTS];
+};
+
+void vsc9953_init(bd_t *bis);
+
+void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus);
+void vsc9953_port_info_set_phy_address(int port, int address);
+void vsc9953_port_enable(int port);
+void vsc9953_port_disable(int port);
+void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int);
+
+#endif /* _VSC9953_H_ */