OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.

This is rework on config files of IGEP-based boards with the aim to remove
duplicated code to be more maintainable. Basically this patch creates a
common configuration file for both boards and only sets the specific option
in the board config file.

On board files the hardcored mach type was replaced in favour of using the
CONFIG_MACH_TYPE option.

More than 200 duplicated lines have been deleted.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>

5 files changed, 11 insertions, 273 deletions

diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c
index 1919085..971e31b 100644
--- a/board/isee/igep0020/igep0020.c
+++ b/board/isee/igep0020/igep0020.c
@@ -52,8 +52,6 @@ static const u32 gpmc_lan_config[] = {
 int board_init(void)
 {
 	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-	/* board id for Linux */
-	gd->bd->bi_arch_number = MACH_TYPE_IGEP0020;
 	/* boot param addr */
 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
 
diff --git a/board/isee/igep0030/igep0030.c b/board/isee/igep0030/igep0030.c
index 492d9d4..653c1b5 100644
--- a/board/isee/igep0030/igep0030.c
+++ b/board/isee/igep0030/igep0030.c
@@ -39,8 +39,6 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_init(void)
 {
 	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-	/* board id for Linux */
-	gd->bd->bi_arch_number = MACH_TYPE_IGEP0030;
 	/* boot param addr */
 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
 
diff --git a/boards.cfg b/boards.cfg
index 4e94197..4d839d2 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -199,8 +199,8 @@ cm_t35                       arm         armv7       cm_t35              -
 omap3_overo                  arm         armv7       overo               -              omap3
 omap3_pandora                arm         armv7       pandora             -              omap3
 dig297                       arm         armv7       dig297              comelit        omap3
-igep0020                     arm         armv7       igep0020            isee           omap3
-igep0030                     arm         armv7       igep0030            isee           omap3
+igep0020                     arm         armv7       igep0020            isee           omap3		igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020
+igep0030                     arm         armv7       igep0030            isee           omap3		igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030
 am3517_evm                   arm         armv7       am3517evm           logicpd        omap3
 mt_ventoux                   arm         armv7       mt_ventoux          teejet         omap3
 omap3_zoom1                  arm         armv7       zoom1               logicpd        omap3
diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h
deleted file mode 100644
index bf39ba5..0000000
--- a/include/configs/igep0030.h
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * (C) Copyright 2010
- * ISEE 2007 SL, <www.iseebcn.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-#include <asm/sizes.h>
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
-#define CONFIG_OMAP34XX		1	/* which is a 34XX */
-#define CONFIG_OMAP3_IGEP0030	1	/* working with IGEP0030 */
-
-#define CONFIG_SDRC	/* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap3.h>
-
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-#define CONFIG_REVISION_TAG		1
-
-#define CONFIG_OF_LIBFDT		1
-
-/*
- * NS16550 Configuration
- */
-
-#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-
-/* select serial console configuration */
-#define CONFIG_CONS_INDEX		3
-#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, 115200}
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_MMC			1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION		1
-
-/* USB */
-#define CONFIG_MUSB_UDC			1
-#define CONFIG_USB_OMAP3		1
-#define CONFIG_TWL4030_USB		1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE		1
-#define CONFIG_USB_TTY			1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
-
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID		0x0451
-#define CONFIG_USBD_PRODUCTID		0x5678
-#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME	"IGEP"
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
-#define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
-#define CONFIG_CMD_ONENAND	/* ONENAND support		*/
-#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands	*/
-#define CONFIG_MTD_DEVICE
-
-#undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
-#undef CONFIG_CMD_NFS		/* nfs				*/
-#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
-#undef CONFIG_CMD_IMLS		/* List all found images	*/
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_SYS_I2C_BUS		0
-#define CONFIG_SYS_I2C_BUS_SELECT	1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER		1
-
-#define CONFIG_BOOTDELAY		3
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"usbtty=cdc_acm\0" \
-	"loadaddr=0x82000000\0" \
-	"usbtty=cdc_acm\0" \
-	"console=ttyS2,115200n8\0" \
-	"mpurate=500\0" \
-	"vram=12M\0" \
-	"dvimode=1024x768MR-16@60\0" \
-	"defaultdisplay=dvi\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext3 rootwait\0" \
-	"nandroot=/dev/mtdblock4 rw\0" \
-	"nandrootfstype=jffs2\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"mpurate=${mpurate} " \
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapfb.debug=y " \
-		"omapdss.def_disp=${defaultdisplay} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"mpurate=${mpurate} " \
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapfb.debug=y " \
-		"omapdss.def_disp=${defaultdisplay} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
-	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source ${loadaddr}\0" \
-	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0" \
-	"nandboot=echo Booting from onenand ...; " \
-		"run nandargs; " \
-		"onenand read ${loadaddr} 280000 400000; " \
-		"bootm ${loadaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loaduimage; then " \
-				"run mmcboot; " \
-			"else run nandboot; " \
-			"fi; " \
-		"fi; " \
-	"else run nandboot; fi"
-
-#define CONFIG_AUTO_COMPLETE		1
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_SYS_PROMPT		"U-Boot # "
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-
-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
-								/* works on */
-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
-					0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
-							/* load address */
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
-
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ			1000
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
-
-/*
- * Physical Memory Map
- *
- */
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 meg */
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
-
-/*
- * FLASH and environment organization
- */
-
-#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M /* Configure the PISMO */
-
-#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
-
-#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
-
-#define CONFIG_ENV_IS_IN_ONENAND	1
-#define CONFIG_ENV_SIZE			(512 << 10) /* Total Size Environment */
-#define CONFIG_ENV_ADDR			ONENAND_ENV_OFFSET
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/igep0020.h b/include/configs/igep00x0.h
index c2fcdff..d2b4b84 100644
--- a/include/configs/igep0020.h
+++ b/include/configs/igep00x0.h
@@ -1,5 +1,7 @@
 /*
- * (C) Copyright 2010
+ * Common configuration settings for IGEP technology based boards
+ *
+ * (C) Copyright 2012
  * ISEE 2007 SL, <www.iseebcn.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -18,8 +20,9 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __IGEP00X0_H
+#define __IGEP00X0_H
+
 #include <asm/sizes.h>
 
 /*
@@ -27,7 +30,6 @@
  */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
-#define CONFIG_OMAP3_IGEP0020	1	/* working with IGEP0020 */
 
 #define CONFIG_SDRC	/* The chip has SDRC controller */
 
@@ -72,7 +74,8 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, 115200}
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, \
+					115200}
 #define CONFIG_GENERIC_MMC		1
 #define CONFIG_MMC			1
 #define CONFIG_OMAP_HSMMC		1
@@ -269,4 +272,4 @@
 					 CONFIG_SYS_INIT_RAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)
 
-#endif /* __CONFIG_H */
+#endif /* __IGEP00X0_H */