powerpc: mpc8xx: remove svm_sc8xx board

This board has been orphaned for a while and old enough.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

16 files changed, 4 insertions, 1579 deletions

diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig
index ae97f30..6392c55 100644
--- a/arch/powerpc/cpu/mpc8xx/Kconfig
+++ b/arch/powerpc/cpu/mpc8xx/Kconfig
@@ -53,9 +53,6 @@ config TARGET_SXNI855T
 config TARGET_SPD823TS
 	bool "Support SPD823TS"
 
-config TARGET_SVM_SC8XX
-	bool "Support svm_sc8xx"
-
 config TARGET_MHPC
 	bool "Support MHPC"
 
@@ -150,7 +147,6 @@ source "board/netvia/Kconfig"
 source "board/r360mpi/Kconfig"
 source "board/sixnet/Kconfig"
 source "board/spd8xx/Kconfig"
-source "board/svm_sc8xx/Kconfig"
 source "board/tqc/tqm8xx/Kconfig"
 
 endmenu
diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c
index e51fec7..90c7e61 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -44,11 +44,7 @@ void cpu_init_f (volatile immap_t * immr)
 #endif /* CONFIG_WATCHDOG */
 
 	/* SIUMCR - contains debug pin configuration (11-6) */
-#ifndef CONFIG_SVM_SC8xx
 	immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
-#else
-	immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
-#endif
 	/* initialize timebase status and control register (11-26) */
 	/* unlock TBSCRK */
 
diff --git a/board/svm_sc8xx/Kconfig b/board/svm_sc8xx/Kconfig
deleted file mode 100644
index 522b1a8..0000000
--- a/board/svm_sc8xx/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-if TARGET_SVM_SC8XX
-
-config SYS_BOARD
-	string
-	default "svm_sc8xx"
-
-config SYS_CONFIG_NAME
-	string
-	default "svm_sc8xx"
-
-endif
diff --git a/board/svm_sc8xx/MAINTAINERS b/board/svm_sc8xx/MAINTAINERS
deleted file mode 100644
index c19bcae..0000000
--- a/board/svm_sc8xx/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SVM_SC8XX BOARD
-M:	John Zhan <zhanz@sinovee.com>
-S:	Orphan (since 2014-06)
-F:	board/svm_sc8xx/
-F:	include/configs/svm_sc8xx.h
-F:	configs/svm_sc8xx_defconfig
diff --git a/board/svm_sc8xx/Makefile b/board/svm_sc8xx/Makefile
deleted file mode 100644
index 4c0b4a3..0000000
--- a/board/svm_sc8xx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= svm_sc8xx.o flash.o
diff --git a/board/svm_sc8xx/flash.c b/board/svm_sc8xx/flash.c
deleted file mode 100644
index 8a04de8..0000000
--- a/board/svm_sc8xx/flash.c
+++ /dev/null
@@ -1,666 +0,0 @@
-/*
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#ifndef	CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#endif
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word(flash_info_t *info, ulong dest, ulong data);
-
-#ifdef CONFIG_BOOT_8B
-static int my_in_8(unsigned char *addr);
-static void my_out_8(unsigned char *addr, int val);
-#endif
-#ifdef CONFIG_BOOT_16B
-static int my_in_be16(unsigned short *addr);
-static void my_out_be16(unsigned short *addr, int val);
-#endif
-#ifdef CONFIG_BOOT_32B
-static unsigned my_in_be32(unsigned *addr);
-static void my_out_be32(unsigned *addr, int val);
-#endif
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size_b0, size_b1;
-	int i;
-
-	size_b0 = 0;
-	size_b1 = 0;
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-
-#ifdef CONFIG_SYS_DOC_BASE
-#ifndef CONFIG_FEL8xx_AT
-	/* 32k bytes */
-	memctl->memc_or5 = (0xffff8000 | CONFIG_SYS_OR_TIMING_DOC);
-	memctl->memc_br5 = CONFIG_SYS_DOC_BASE | 0x401;
-#else
-	/* 32k bytes */
-	memctl->memc_or3 = (0xffff8000 | CONFIG_SYS_OR_TIMING_DOC);
-	memctl->memc_br3 = CONFIG_SYS_DOC_BASE | 0x401;
-#endif
-#endif
-#if defined(CONFIG_BOOT_8B)
-	size_b0 = 0x80000;	/* 512 K */
-
-	flash_info[0].flash_id = FLASH_MAN_AMD | FLASH_AM040;
-	flash_info[0].sector_count = 8;
-	flash_info[0].size = 0x00080000;
-
-	/* set up sector start address table */
-	for (i = 0; i < flash_info[0].sector_count; i++)
-		flash_info[0].start[i] = 0x40000000 + (i * 0x10000);
-
-	/* protect all sectors */
-	for (i = 0; i < flash_info[0].sector_count; i++)
-		flash_info[0].protect[i] = 0x1;
-
-#elif defined(CONFIG_BOOT_16B)
-	size_b0 = 0x400000;	/* 4MB , assume AMD29LV320B */
-
-	flash_info[0].flash_id = FLASH_MAN_AMD | FLASH_AM320B;
-	flash_info[0].sector_count = 67;
-	flash_info[0].size = 0x00400000;
-
-	/* set up sector start address table */
-	flash_info[0].start[0] = 0x40000000;
-	flash_info[0].start[1] = 0x40000000 + 0x4000;
-	flash_info[0].start[2] = 0x40000000 + 0x6000;
-	flash_info[0].start[3] = 0x40000000 + 0x8000;
-
-	for (i = 4; i < flash_info[0].sector_count; i++) {
-		flash_info[0].start[i] =
-			0x40000000 + 0x10000 + ((i - 4) * 0x10000);
-	}
-
-	/* protect all sectors */
-	for (i = 0; i < flash_info[0].sector_count; i++)
-		flash_info[0].protect[i] = 0x1;
-#endif
-
-#ifdef CONFIG_BOOT_32B
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-	size_b0 = flash_get_size((vu_long *) FLASH_BASE0_PRELIM,
-			       &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0 << 20);
-	}
-
-	size_b1 = flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
-			       &flash_info[1]);
-
-	if (size_b1 > size_b0) {
-		printf("## ERROR: "
-			"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
-			size_b1, size_b1 << 20, size_b0, size_b0 << 20);
-		flash_info[0].flash_id = FLASH_UNKNOWN;
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[0].sector_count = -1;
-		flash_info[1].sector_count = -1;
-		flash_info[0].size = 0;
-		flash_info[1].size = 0;
-
-		return 0;
-	}
-
-	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH |
-				(-size_b0 & OR_AM_MSK);
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
-				BR_MS_GPCM | BR_V;
-
-	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE,
-				&flash_info[0]);
-
-	flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		CONFIG_SYS_MONITOR_BASE,
-		CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-		&flash_info[0]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		CONFIG_ENV_ADDR,
-		CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-
-	if (size_b1) {
-		memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH |
-			(-size_b1 & 0xFFFF8000);
-		memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE +
-			size_b0) & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
-		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE +
-					size_b0), &flash_info[1]);
-
-		flash_get_offsets(CONFIG_SYS_FLASH_BASE + size_b0,
-				  &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-		/* monitor protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_SYS_MONITOR_BASE,
-			      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-			      &flash_info[1]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-		/* ENV protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_ENV_ADDR,
-			      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-			      &flash_info[1]);
-#endif
-	} else {
-		memctl->memc_br1 = 0;	/* invalidate bank */
-
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-	}
-
-	flash_info[0].size = size_b0;
-	flash_info[1].size = size_b1;
-
-
-#endif /* CONFIG_BOOT_32B */
-
-	return size_b0 + size_b1;
-}
-
-
-void flash_print_info(flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf("FUJITSU ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM400B:
-		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:
-		printf("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:
-		printf("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:
-		printf("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:
-		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:
-		printf("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	default:
-		printf("Unknown Chip Type\n");
-		break;
-	}
-
-	printf("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s",
-		       info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long *) (info->start[0]);
-	int flag, prot, sect, l_sect, in_mid, in_did;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN)
-			printf("- missing\n");
-		else
-			printf("- no sectors to erase\n");
-
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf("Can't erase unknown flash type %08lx - aborted\n",
-		       info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect])
-			prot++;
-	}
-
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-#if defined(CONFIG_BOOT_8B)
-	my_out_8((unsigned char *)((ulong)addr + 0x555), 0xaa);
-	my_out_8((unsigned char *)((ulong)addr + 0x2aa), 0x55);
-	my_out_8((unsigned char *)((ulong)addr + 0x555), 0x90);
-
-	in_mid = my_in_8((unsigned char *)addr);
-	in_did = my_in_8((unsigned char *)((ulong)addr + 1));
-
-	printf(" man ID=0x%x, dev ID=0x%x.\n", in_mid, in_did);
-
-	my_out_8((unsigned char *)addr, 0xf0);
-	udelay(1);
-
-	my_out_8((unsigned char *)((ulong)addr + 0x555), 0xaa);
-	my_out_8((unsigned char *)((ulong)addr + 0x2aa), 0x55);
-	my_out_8((unsigned char *)((ulong)addr + 0x555), 0x80);
-	my_out_8((unsigned char *)((ulong)addr + 0x555), 0xaa);
-	my_out_8((unsigned char *)((ulong)addr + 0x2aa), 0x55);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long *) (info->start[sect]);
-			/*addr[0] = 0x00300030; */
-			my_out_8((unsigned char *)((ulong)addr), 0x30);
-			l_sect = sect;
-		}
-	}
-#elif defined(CONFIG_BOOT_16B)
-	my_out_be16((unsigned short *)((ulong)addr + (0xaaa)), 0xaa);
-	my_out_be16((unsigned short *)((ulong)addr + (0x554)), 0x55);
-	my_out_be16((unsigned short *)((ulong)addr + (0xaaa)), 0x90);
-	in_mid = my_in_be16((unsigned short *)addr);
-	in_did = my_in_be16((unsigned short *)((ulong)addr + 2));
-	printf(" man ID=0x%x, dev ID=0x%x.\n", in_mid, in_did);
-	my_out_be16((unsigned short *)addr, 0xf0);
-	udelay(1);
-	my_out_be16((unsigned short *)((ulong)addr + 0xaaa), 0xaa);
-	my_out_be16((unsigned short *)((ulong)addr + 0x554), 0x55);
-	my_out_be16((unsigned short *)((ulong)addr + 0xaaa), 0x80);
-	my_out_be16((unsigned short *)((ulong)addr + 0xaaa), 0xaa);
-	my_out_be16((unsigned short *)((ulong)addr + 0x554), 0x55);
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long *) (info->start[sect]);
-			my_out_be16((unsigned short *)((ulong)addr), 0x30);
-			l_sect = sect;
-		}
-	}
-
-#elif defined(CONFIG_BOOT_32B)
-	my_out_be32((unsigned *)((ulong)addr + 0x1554), 0xaa);
-	my_out_be32((unsigned *)((ulong)addr + 0xaa8), 0x55);
-	my_out_be32((unsigned *)((ulong)addr + 0x1554), 0x90);
-
-	in_mid = my_in_be32((unsigned *)addr);
-	in_did = my_in_be32((unsigned *)((ulong)addr + 4));
-
-	printf(" man ID=0x%x, dev ID=0x%x.\n", in_mid, in_did);
-
-	my_out_be32((unsigned *) addr, 0xf0);
-	udelay(1);
-
-	my_out_be32((unsigned *)((ulong)addr + 0x1554), 0xaa);
-	my_out_be32((unsigned *)((ulong)addr + 0xaa8), 0x55);
-	my_out_be32((unsigned *)((ulong)addr + 0x1554), 0x80);
-	my_out_be32((unsigned *)((ulong)addr + 0x1554), 0xaa);
-	my_out_be32((unsigned *)((ulong)addr + 0xaa8), 0x55);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long *) (info->start[sect]);
-			my_out_be32((unsigned *)((ulong)addr), 0x00300030);
-			l_sect = sect;
-		}
-	}
-
-#else
-#error CONFIG_BOOT_(size)B missing.
-#endif
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay(1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer(0);
-	last = start;
-	addr = (vu_long *) (info->start[l_sect]);
-#if defined(CONFIG_BOOT_8B)
-	while ((my_in_8((unsigned char *) addr) & 0x80) != 0x80)
-#elif defined(CONFIG_BOOT_16B)
-	while ((my_in_be16((unsigned short *) addr) & 0x0080) != 0x0080)
-#elif defined(CONFIG_BOOT_32B)
-	while ((my_in_be32((unsigned *) addr) & 0x00800080) != 0x00800080)
-#else
-#error CONFIG_BOOT_(size)B missing.
-#endif
-	{
-		now = get_timer(start);
-		if (now > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc('.');
-			last = now;
-		}
-	}
-DONE:
-	/* reset to read mode */
-	addr = (volatile unsigned long *) info->start[0];
-
-#if defined(CONFIG_BOOT_8B)
-	my_out_8((unsigned char *) addr, 0xf0);
-#elif defined(CONFIG_BOOT_16B)
-	my_out_be16((unsigned short *) addr, 0x00f0);
-#elif defined(CONFIG_BOOT_32B)
-	my_out_be32((unsigned *) addr, 0x00F000F0);	/* reset bank */
-#else
-#error CONFIG_BOOT_(size)B missing.
-#endif
-	printf(" done\n");
-	return 0;
-}
-
-/*
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	l = addr - wp;
-
-	if (l != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp)
-			data = (data << 8) | (*(uchar *) cp);
-
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 4; ++i, ++cp)
-			data = (data << 8) | (*(uchar *) cp);
-
-		rc = write_word(info, wp, data);
-
-		if (rc != 0)
-			return rc;
-
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i = 0; i < 4; ++i)
-			data = (data << 8) | *src++;
-
-		rc = write_word(info, wp, data);
-
-		if (rc != 0)
-			return rc;
-
-		wp += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0)
-		return 0;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < 4; ++i, ++cp)
-		data = (data << 8) | (*(uchar *) cp);
-
-	return write_word(info, wp, data);
-}
-
-/*
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word(flash_info_t *info, ulong dest, ulong data)
-{
-	ulong addr = (ulong) (info->start[0]);
-	ulong start;
-	int flag;
-	ulong i;
-	int data_short[2];
-
-	/* Check if Flash is (sufficiently) erased */
-	if (((ulong)*(ulong *)dest & data) != data)
-		return 2;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-#if defined(CONFIG_BOOT_8B)
-#ifdef DEBUG
-	{
-		int in_mid, in_did;
-
-		my_out_8((unsigned char *) (addr + 0x555), 0xaa);
-		my_out_8((unsigned char *) (addr + 0x2aa), 0x55);
-		my_out_8((unsigned char *) (addr + 0x555), 0x90);
-
-		in_mid = my_in_8((unsigned char *) addr);
-		in_did = my_in_8((unsigned char *) (addr + 1));
-
-		printf(" man ID=0x%x, dev ID=0x%x.\n", in_mid, in_did);
-
-		my_out_8((unsigned char *) addr, 0xf0);
-		udelay(1);
-	}
-#endif
-	{
-		int data_ch[4];
-
-		data_ch[0] = (int) ((data >> 24) & 0xff);
-		data_ch[1] = (int) ((data >> 16) & 0xff);
-		data_ch[2] = (int) ((data >> 8) & 0xff);
-		data_ch[3] = (int) (data & 0xff);
-
-		for (i = 0; i < 4; i++) {
-			my_out_8((unsigned char *) (addr + 0x555), 0xaa);
-			my_out_8((unsigned char *) (addr + 0x2aa), 0x55);
-			my_out_8((unsigned char *) (addr + 0x555), 0xa0);
-			my_out_8((unsigned char *) (dest + i), data_ch[i]);
-
-			/* re-enable interrupts if necessary */
-			if (flag)
-				enable_interrupts();
-
-			start = get_timer(0);
-			while ((my_in_8((unsigned char *)(dest + i))) !=
-			       (data_ch[i])) {
-				if (get_timer(start) >
-				    CONFIG_SYS_FLASH_WRITE_TOUT) {
-					return 1;
-				}
-			}
-		}		/* for */
-	}
-#elif defined(CONFIG_BOOT_16B)
-	data_short[0] = (int) (data >> 16) & 0xffff;
-	data_short[1] = (int) data & 0xffff;
-	for (i = 0; i < 2; i++) {
-		my_out_be16((unsigned short *)((ulong)addr + 0xaaa), 0xaa);
-		my_out_be16((unsigned short *)((ulong)addr + 0x554), 0x55);
-		my_out_be16((unsigned short *)((ulong)addr + 0xaaa), 0xa0);
-		my_out_be16((unsigned short *)(dest + (i * 2)),
-			    data_short[i]);
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		start = get_timer(0);
-		while ((my_in_be16((unsigned short *)(dest + (i * 2)))) !=
-							(data_short[i])) {
-			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
-				return 1;
-		}
-	}
-#elif defined(CONFIG_BOOT_32B)
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00A000A0;
-
-	*((vu_long *)dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer(0);
-	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
-			return 1;
-	}
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_BOOT_8B
-static int my_in_8(unsigned char *addr)
-{
-	int ret;
-	__asm__ __volatile__("lbz%U1%X1 %0,%1; eieio":"=r"(ret):"m"(*addr));
-
-	return ret;
-}
-
-static void my_out_8(unsigned char *addr, int val)
-{
-	__asm__ __volatile__("stb%U0%X0 %1,%0; eieio":"=m"(*addr):"r"(val));
-}
-#endif
-#ifdef CONFIG_BOOT_16B
-static int my_in_be16(unsigned short *addr)
-{
-	int ret;
-	__asm__ __volatile__("lhz%U1%X1 %0,%1; eieio":"=r"(ret):"m"(*addr));
-
-	return ret;
-}
-
-static void my_out_be16(unsigned short *addr, int val)
-{
-	__asm__ __volatile__("sth%U0%X0 %1,%0; eieio":"=m"(*addr):"r"(val));
-}
-#endif
-#ifdef CONFIG_BOOT_32B
-static unsigned my_in_be32(unsigned *addr)
-{
-	unsigned ret;
-	__asm__ __volatile__("lwz%U1%X1 %0,%1; eieio":"=r"(ret):"m"(*addr));
-
-	return ret;
-}
-
-static void my_out_be32(unsigned *addr, int val)
-{
-	__asm__ __volatile__("stw%U0%X0 %1,%0; eieio":"=m"(*addr):"r"(val));
-}
-#endif
diff --git a/board/svm_sc8xx/svm_sc8xx.c b/board/svm_sc8xx/svm_sc8xx.c
deleted file mode 100644
index 5db4850..0000000
--- a/board/svm_sc8xx/svm_sc8xx.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-const uint sdram_table[] =
-{
-/*-----------------
- UPM A contents:
------------------ */
-/*---------------------------------------------------
- Read Single Beat Cycle. Offset 0 in the RAM array.
----------------------------------------------------- */
-0x1f07fc04,  0xeeaefc04,  0x11adfc04,  0xefbbbc00 ,
-0x1ff77c47,  0x1ff77c35,  0xefeabc34,  0x1fb57c35 ,
-/*------------------------------------------------
- Read Burst Cycle. Offset 0x8 in the RAM array.
------------------------------------------------- */
-0x1f07fc04,  0xeeaefc04,  0x10adfc04,  0xf0affc00,
-0xf0affc00,  0xf1affc00,  0xefbbbc00,  0x1ff77c47,
-0xffffffff,  0xffffffff,  0xffffffff,  0xffffffff,
-0xffffffff,  0xffffffff,  0xffffffff,  0xffffffff,
-/*-------------------------------------------------------
- Write Single Beat Cycle. Offset 0x18 in the RAM array
-------------------------------------------------------- */
-0x1f27fc04,  0xeeaebc00,  0x01b93c04,  0x1ff77c47 ,
-0xffffffff,  0xffffffff,  0xffffffff,  0xffffffff ,
-/*-------------------------------------------------
- Write Burst Cycle. Offset 0x20 in the RAM array
-------------------------------------------------- */
-0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
-0xf0affc00, 0xe1bbbc04, 0x1ff77c47, 0xffffffff,
-0xffffffff,  0xffffffff,  0xffffffff,  0xffffffff ,
-0xffffffff,  0xffffffff,  0xffffffff,  0xffffffff ,
-/*------------------------------------------------------------------------
- Periodic Timer Expired. For DRAM refresh. Offset 0x30 in the RAM array
------------------------------------------------------------------------- */
-0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-0xfffffc84, 0xfffffc07, 0xffffffff, 0xffffffff,
-0xffffffff,  0xffffffff,  0xffffffff,  0xffffffff ,
-/*-----------
-*  Exception:
-*  ----------- */
-0x7ffefc07,  0xffffffff,  0xffffffff,  0xffffffff ,
-};
-
-/* ------------------------------------------------------------------------- */
-/*
- * Check Board Identity:
- *
- * Test ID string (SVM8...)
- *
- * Return 1 for "SC8xx" type, 0 else.
- */
-
-int checkboard(void)
-{
-	char buf[64];
-	int i;
-	int l = getenv_f("serial#", buf, sizeof(buf));
-
-	if (l < 0 || strncmp(buf, "SVM8", 4)) {
-		printf("### No HW ID - assuming SVM SC8xx\n");
-		return (0);
-	}
-
-	for (i = 0; i < l; ++i) {
-		if (buf[i] == ' ')
-			break;
-		putc(buf[i]);
-	}
-
-	putc('\n');
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size_b0 = 0;
-
-	upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
-
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-#if defined (CONFIG_SDRAM_16M)
-	memctl->memc_mamr = 0x00802114 | CONFIG_SYS_MxMR_PTx;
-	memctl->memc_mcr  = 0x80002105;     /* SDRAM bank 0 */
-	udelay(1);
-	memctl->memc_mcr  = 0x80002830;
-	udelay(1);
-	memctl->memc_mar  = 0x00000088;
-	udelay(1);
-	memctl->memc_mcr  = 0x80002106;
-	udelay(1);
-	memctl->memc_or1 =  0xff000a00;
-	size_b0 = 0x01000000;
-#elif defined (CONFIG_SDRAM_32M)
-	memctl->memc_mamr = 0x00904114 | CONFIG_SYS_MxMR_PTx;
-	memctl->memc_mcr  = 0x80002105;     /* SDRAM bank 0 */
-	udelay(1);
-	memctl->memc_mcr  = 0x80002830;
-	udelay(1);
-	memctl->memc_mar  = 0x00000088;
-	udelay(1);
-	memctl->memc_mcr  = 0x80002106;
-	udelay(1);
-	memctl->memc_or1 =  0xfe000a00;
-	size_b0 = 0x02000000;
-#elif defined (CONFIG_SDRAM_64M)
-	memctl->memc_mamr = 0x00a04114 | CONFIG_SYS_MxMR_PTx;
-	memctl->memc_mcr  = 0x80002105;     /* SDRAM bank 0 */
-	udelay(1);
-	memctl->memc_mcr  = 0x80002830;
-	udelay(1);
-	memctl->memc_mar  = 0x00000088;
-	udelay(1);
-	memctl->memc_mcr  = 0x80002106;
-	udelay(1);
-	memctl->memc_or1 =  0xfc000a00;
-	size_b0 = 0x04000000;
-#else
-#error SDRAM size configuration missing.
-#endif
-	memctl->memc_br1 =  0x00000081;
-	udelay(200);
-	return (size_b0 );
-}
-
-#if defined(CONFIG_CMD_DOC)
-void doc_init (void)
-{
-		doc_probe (CONFIG_SYS_DOC_BASE);
-}
-#endif
diff --git a/board/svm_sc8xx/u-boot.lds b/board/svm_sc8xx/u-boot.lds
deleted file mode 100644
index df564e9..0000000
--- a/board/svm_sc8xx/u-boot.lds
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-    lib/built-in.o			(.text*)
-    net/built-in.o			(.text*)
-    arch/powerpc/cpu/mpc8xx/built-in.o	(.text*)
-    arch/powerpc/lib/built-in.o		(.text*)
-    board/svm_sc8xx/built-in.o		(.text*)
-    *(.text.*printf)
-    *(.text.do_mem_*)
-    *(.text.flash*)
-    *(.text.run_command)
-    *(.text.main_loop)
-    *(.text.srec_decode)
-
-    . = env_offset;
-    common/env_embedded.o		(.ppcenv*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/svm_sc8xx/u-boot.lds.debug b/board/svm_sc8xx/u-boot.lds.debug
deleted file mode 100644
index b2c562c..0000000
--- a/board/svm_sc8xx/u-boot.lds.debug
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/configs/svm_sc8xx_defconfig b/configs/svm_sc8xx_defconfig
deleted file mode 100644
index 9f0d343..0000000
--- a/configs/svm_sc8xx_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_8xx=y
-CONFIG_TARGET_SVM_SC8XX=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index b7b16d1..55b2c23 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+svm_sc8xx        powerpc     mpc8xx         -           -           John Zhan <zhanz@sinovee.com>
 stxxtc           powerpc     mpc8xx         -           -           Dan Malek <dan@embeddedalley.com>
 omap5912osk      arm         arm926ejs      -           -           Rishi Bhattacharya <rishi@ti.com>
 p1023rds         powerpc     mpc85xx        d0bc5140    2014-07-22  Roy Zang <tie-fei.zang@freescale.com>
diff --git a/drivers/pcmcia/tqm8xx_pcmcia.c b/drivers/pcmcia/tqm8xx_pcmcia.c
index dda7d37..8b74478 100644
--- a/drivers/pcmcia/tqm8xx_pcmcia.c
+++ b/drivers/pcmcia/tqm8xx_pcmcia.c
@@ -20,14 +20,12 @@
 #endif
 
 #if	defined(CONFIG_PCMCIA)	\
-	&& (defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx))
+	&& defined(CONFIG_TQM8xxL)
 
 #if	defined(CONFIG_VIRTLAB2)
 #define	PCMCIA_BOARD_MSG	"Virtlab2"
 #elif	defined(CONFIG_TQM8xxL)
 #define	PCMCIA_BOARD_MSG	"TQM8xxL"
-#elif	defined(CONFIG_SVM_SC8xx)
-#define	PCMCIA_BOARD_MSG	"SC8xx"
 #endif
 
 #if	defined(CONFIG_NSCU)
@@ -302,4 +300,4 @@ done:
 	return 0;
 }
 
-#endif	/* CONFIG_PCMCIA && (CONFIG_TQM8xxL || CONFIG_SVM_SC8xx) */
+#endif	/* CONFIG_PCMCIA && CONFIG_TQM8xxL */
diff --git a/include/commproc.h b/include/commproc.h
index 52ac4ca..fec818d 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -779,57 +779,6 @@ typedef struct scc_enet {
 
 /***  NETVIA  *******************************************************/
 
-/* SinoVee Microsystems SC8xx series FEL8xx-AT,SC823,SC850,SC855T,SC860T */
-#if ( defined CONFIG_SVM_SC8xx )
-# ifndef CONFIG_FEC_ENET
-
-#define PROFF_ENET      PROFF_SCC2
-#define CPM_CR_ENET     CPM_CR_CH_SCC2
-#define SCC_ENET        1
-
-	/* Bits in parallel I/O port registers that have to be set/cleared
-	 *  *  *  * to configure the pins for SCC2 use.
-	 *   *   *   */
-#define PA_ENET_RXD     ((ushort)0x0004)        /* PA 13 */
-#define PA_ENET_TXD     ((ushort)0x0008)        /* PA 12 */
-#define PA_ENET_RCLK    ((ushort)0x0400)        /* PA  5 */
-#define PA_ENET_TCLK    ((ushort)0x0800)        /* PA  4 */
-
-#define PB_ENET_TENA    ((uint)0x00002000)      /* PB 18 */
-
-#define PC_ENET_CLSN    ((ushort)0x0040)        /* PC  9 */
-#define PC_ENET_RENA    ((ushort)0x0080)        /* PC  8 */
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
- *  *  *  * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- *   *   *   */
-#define SICR_ENET_MASK  ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00003700)
-
-# else                          /* Use FEC for Fast Ethernet */
-
-#undef  SCC_ENET
-#define FEC_ENET
-
-#define PD_MII_TXD1     ((ushort)0x1000)        /* PD  3 */
-#define PD_MII_TXD2     ((ushort)0x0800)        /* PD  4 */
-#define PD_MII_TXD3     ((ushort)0x0400)        /* PD  5 */
-#define PD_MII_RX_DV    ((ushort)0x0200)        /* PD  6 */
-#define PD_MII_RX_ERR   ((ushort)0x0100)        /* PD  7 */
-#define PD_MII_RX_CLK   ((ushort)0x0080)        /* PD  8 */
-#define PD_MII_TXD0     ((ushort)0x0040)        /* PD  9 */
-#define PD_MII_RXD0     ((ushort)0x0020)        /* PD 10 */
-#define PD_MII_TX_ERR   ((ushort)0x0010)        /* PD 11 */
-#define PD_MII_MDC      ((ushort)0x0008)        /* PD 12 */
-#define PD_MII_RXD1     ((ushort)0x0004)        /* PD 13 */
-#define PD_MII_RXD2     ((ushort)0x0002)        /* PD 14 */
-#define PD_MII_RXD3     ((ushort)0x0001)        /* PD 15 */
-
-#define PD_MII_MASK     ((ushort)0x1FFF)        /* PD 3...15 */
-
-# endif /* CONFIG_FEC_ENET */
-#endif  /* CONFIG_SVM_SC8xx */
-
-
 #if defined(CONFIG_NETVIA)
 /* Bits in parallel I/O port registers that have to be set/cleared
  * to configure the pins for SCC2 use.
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
deleted file mode 100644
index b4aa948..0000000
--- a/include/configs/svm_sc8xx.h
+++ /dev/null
@@ -1,450 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific,
- *                  for SinoVee Microsystems SC8xx series SBC
- *                  http://www.fel.com.cn (Chinese)
- *                  http://www.sinovee.com (English)
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-/* Custom configuration */
-/* SC823,SC850,SC860SAR, FEL8xx-AT(823/850/860) */
-/* SC85T,SC860T, FEL8xx-AT(855T/860T) */
-/*#define CONFIG_FEL8xx_AT */
-/*#define CONFIG_LCD */
-/*#define CONFIG_MPC8XX_LCD*/
-/* if core > 50MHz , un-comment CONFIG_BUS_DIV2 */
-/* #define CONFIG_50MHz */
-/* #define CONFIG_66MHz */
-/* #define CONFIG_75MHz */
-#define CONFIG_80MHz
-/*#define CONFIG_100MHz */
-/* #define CONFIG_BUS_DIV2	1 */
-/* for BOOT device port size */
-/* #define CONFIG_BOOT_8B */
-#define CONFIG_BOOT_16B
-/* #define CONFIG_BOOT_32B */
-/* #define CONFIG_CAN_DRIVER */
-/* #define DEBUG */
-#define CONFIG_FEC_ENET
-
-/* #define CONFIG_SDRAM_16M */
-#define CONFIG_SDRAM_32M
-/* #define CONFIG_SDRAM_64M */
-#define CONFIG_SYS_RESET_ADDRESS 0xffffffff
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-/* #define CONFIG_MPC823		1 */
-/* #define CONFIG_MPC850		1 */
-#define CONFIG_MPC855		1
-/* #define CONFIG_MPC860		1 */
-/* #define CONFIG_MPC860T		1 */
-
-#undef	CONFIG_WATCHDOG			/* watchdog */
-
-#define CONFIG_SVM_SC8xx		1	/* ...on SVM SC8xx series	*/
-
-#ifdef	CONFIG_LCD			/* with LCD controller ?	*/
-/* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display	*/
-#endif
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		19200	/* console baudrate = 115kbps	*/
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds	*/
-#endif
-
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-
-#define CONFIG_BOARD_TYPES      1       /* support board types          */
-
-#define CONFIG_PREBOOT	"echo;echo Welcome to U-Boot SVM port;echo;echo Type \"? or help\" to get on-line help;echo"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_EXTRA_ENV_SETTINGS                                       \
-	"nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-	 "nfsroot=${serverip}:${rootpath}\0"                     \
-	"ramargs=setenv bootargs root=/dev/ram rw\0"                    \
-	"addip=setenv bootargs ${bootargs} "                            \
-	       "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-		":${hostname}:${netdev}:off panic=1\0"                  \
-		"flash_nfs=run nfsargs addip;"                                  \
-	     "bootm ${kernel_addr}\0"                                \
-	"flash_self=run ramargs addip;"                                 \
-	       "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
-	"net_nfs=tftp 0x210000 ${bootfile};run nfsargs addip;bootm\0"     \
-	"rootpath=/opt/sinovee/ppc8xx-linux-2.0/target\0"                                  \
-	"bootfile=pImage-sc855t\0"                           \
-	"kernel_addr=48000000\0"                                        \
-	"ramdisk_addr=48100000\0"                                       \
-	""
-#define CONFIG_BOOTCOMMAND							\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
-	"tftpboot 0x210000 pImage-sc855t;bootm 0x210000"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-
-#ifdef CONFIG_LCD
-# undef	 CONFIG_STATUS_LED		/* disturbs display		*/
-#else
-# define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
-#endif	/* CONFIG_LCD */
-
-#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-#define	CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 192 kB for Monitor	*/
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-
-#ifdef CONFIG_BOOT_8B
-#define	CONFIG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
-#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
-#elif defined (CONFIG_BOOT_16B)
-#define	CONFIG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
-#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
-#elif defined (CONFIG_BOOT_32B)
-#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-#endif
-
-/* Address and size of Redundant Environment Sector     */
-#define CONFIG_ENV_OFFSET_REDUND   (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND     (CONFIG_ENV_SIZE)
-
-
-/*-----------------------------------------------------------------------
- * Hardware Information Block
- */
-#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC	0x46454C38	/* 'SVM8' */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-/*#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-*/
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR 0xffffff88
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef	CONFIG_CAN_DRIVER
-/*#define CONFIG_SYS_SIUMCR 0x00610c00	*/
-#define CONFIG_SYS_SIUMCR 0x00000000
-#else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-#endif	/* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	0x0001
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	0x00c3
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	0x0000
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- */
-#if defined (CONFIG_100MHz)
-#define CONFIG_SYS_PLPRCR 0x06301000
-#define CONFIG_8xx_GCLK_FREQ 100000000
-#elif defined (CONFIG_80MHz)
-#define CONFIG_SYS_PLPRCR 0x04f01000
-#define CONFIG_8xx_GCLK_FREQ 80000000
-#elif defined(CONFIG_75MHz)
-#define CONFIG_SYS_PLPRCR 0x04a00100
-#define CONFIG_8xx_GCLK_FREQ 75000000
-#elif defined(CONFIG_66MHz)
-#define CONFIG_SYS_PLPRCR 0x04101000
-#define CONFIG_8xx_GCLK_FREQ 66000000
-#elif defined(CONFIG_50MHz)
-#define CONFIG_SYS_PLPRCR 0x03101000
-#define CONFIG_8xx_GCLK_FREQ 50000000
-#endif
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-#ifdef	CONFIG_BUS_DIV2
-#define CONFIG_SYS_SCCR	0x02020000 | SCCR_RTSEL
-#else			/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR    0x02000000 | SCCR_RTSEL
-#endif
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/
-
-#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
-#define CONFIG_IDE_INIT_POSTRESET	1	/* Use postreset IDE hook */
-#define	CONFIG_IDE_8xx_DIRECT	1	/* Direct IDE    not supported	*/
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_BASE_ADDR       0xFE100010
-#define CONFIG_SYS_ATA_IDE0_OFFSET     0x0000
-/*#define CONFIG_SYS_ATA_IDE1_OFFSET     0x0C00 */
-#define CONFIG_SYS_ATA_DATA_OFFSET     0x0000  /* Offset for data I/O
-					   */
-#define CONFIG_SYS_ATA_REG_OFFSET      0x0200  /* Offset for normal register accesses
-					   */
-#define CONFIG_SYS_ATA_ALT_OFFSET      0x0210  /* Offset for alternate registers
-					   */
-#define CONFIG_ATAPI
-#define CONFIG_SYS_PIO_MODE 0
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define	CONFIG_SYS_DER	0x2002000F*/
-#define CONFIG_SYS_DER	0x0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/*
- * FLASH timing:
- */
-#if defined(CONFIG_100MHz)
-#define CONFIG_SYS_OR_TIMING_FLASH 0x000002f4
-#define CONFIG_SYS_OR_TIMING_DOC   0x000002f4
-#define CONFIG_SYS_MxMR_PTx 0x61000000
-#define CONFIG_SYS_MPTPR 0x400
-
-#elif  defined(CONFIG_80MHz)
-#define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4
-#define CONFIG_SYS_OR_TIMING_DOC   0x000001f4
-#define CONFIG_SYS_MxMR_PTx 0x4e000000
-#define CONFIG_SYS_MPTPR 0x400
-
-#elif defined(CONFIG_75MHz)
-#define CONFIG_SYS_OR_TIMING_FLASH 0x000008f4
-#define CONFIG_SYS_OR_TIMING_DOC   0x000002f4
-#define CONFIG_SYS_MxMR_PTx 0x49000000
-#define CONFIG_SYS_MPTPR 0x400
-
-#elif defined(CONFIG_66MHz)
-#define CONFIG_SYS_OR_TIMING_FLASH     (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
-	OR_SCY_3_CLK | OR_EHTR | OR_BI)
-/*#define CONFIG_SYS_OR_TIMING_FLASH 0x000001f4 */
-#define CONFIG_SYS_OR_TIMING_DOC   0x000003f4
-#define CONFIG_SYS_MxMR_PTx  0x40000000
-#define CONFIG_SYS_MPTPR 0x400
-
-#else		/*   50 MHz */
-#define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4
-#define CONFIG_SYS_OR_TIMING_DOC   0x000001f4
-#define CONFIG_SYS_MxMR_PTx  0x30000000
-#define CONFIG_SYS_MPTPR 0x400
-#endif	/*CONFIG_??MHz */
-
-
-#if  defined (CONFIG_BOOT_8B)   /* 512K X 8 ,29F040 , 2MB space */
-#define CONFIG_SYS_OR0_PRELIM	(0xffe00000 | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8)
-#elif  defined (CONFIG_BOOT_16B)   /* 29lv160 X 16 , 4MB space */
-#define CONFIG_SYS_OR0_PRELIM	(0xffc00000 | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
-#elif defined( CONFIG_BOOT_32B )  /* 29lv160 X 2 X 32, 4/8/16MB , 64MB space */
-#define CONFIG_SYS_OR0_PRELIM	(0xfc000000 | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-#else
-#error Boot device port size missing.
-#endif
-
-/*
- * Disk-On-Chip configuration
- */
-
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT
-#define CONFIG_SYS_MAX_DOC_DEVICE      1       /* Max number of DOC devices    */
-
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-#define CONFIG_SYS_DOC_BASE 0x80000000
-
-#endif	/* __CONFIG_H */
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 8aec254..4b667f4 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -21,7 +21,7 @@
 
 #if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
 
-#if defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx)
+#if defined(CONFIG_TQM8xxL)
 # define	CONFIG_PCMCIA_SLOT_B	/* The TQM8xxL use SLOT_B	*/
 #elif defined(CONFIG_SPD823TS)		/* The SPD8xx  use SLOT_B	*/
 # define CONFIG_PCMCIA_SLOT_B
diff --git a/include/status_led.h b/include/status_led.h
index a41d3bc..c9d21d1 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -217,20 +217,6 @@ void status_led_set  (int led, int state);
 
 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
 
-#elif defined(CONFIG_SVM_SC8xx)
-# define STATUS_LED_PAR         im_cpm.cp_pbpar
-# define STATUS_LED_DIR         im_cpm.cp_pbdir
-# define STATUS_LED_ODR         im_cpm.cp_pbodr
-# define STATUS_LED_DAT         im_cpm.cp_pbdat
-
-# define STATUS_LED_BIT         0x00000001
-# define STATUS_LED_PERIOD      (CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE       STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE      1               /* LED on for bit == 1  */
-
-# define STATUS_LED_BOOT        0               /* LED 0 used for boot status */
-
 #elif defined(CONFIG_V38B)
 
 # define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */