diff options
| author | Tero Kristo <t-kristo@ti.com> | 2012-04-25 06:05:19 +0000 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-05-15 08:31:40 +0200 |
| commit | 954211cb8c1bcf829edee11ade8d62bf7adc3c07 (patch) | |
| tree | 24aa434dcb50a0a610a5c0565ffcc8260e334160 | |
| parent | f1e445c3c94aaab910b4588ec4c8934fd9edd86a (diff) | |
| download | u-boot-imx-954211cb8c1bcf829edee11ade8d62bf7adc3c07.zip u-boot-imx-954211cb8c1bcf829edee11ade8d62bf7adc3c07.tar.gz u-boot-imx-954211cb8c1bcf829edee11ade8d62bf7adc3c07.tar.bz2 | |
omap4: panda: disable uart2 pads during boot
If uart2 is enabled during boot, spurious wifi chip transmission will
hang the module and it is impossible to recover from this situation
without hard reset. This will prevent any l4_per domain idle
transitions.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
| -rw-r--r-- | board/ti/panda/panda_mux_data.h | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h index 3efc22a..dc8b388 100644 --- a/board/ti/panda/panda_mux_data.h +++ b/board/ti/panda/panda_mux_data.h @@ -168,10 +168,10 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = { {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */ {ABE_DMIC_DIN2, (PTU | IEN | M3)}, /* gpio_121 */ {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */ - {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */ - {UART2_RTS, (M0)}, /* uart2_rts */ - {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */ - {UART2_TX, (M0)}, /* uart2_tx */ + {UART2_CTS, (PTU | IEN | M7)}, /* uart2_cts */ + {UART2_RTS, (M7)}, /* uart2_rts */ + {UART2_RX, (PTU | IEN | M7)}, /* uart2_rx */ + {UART2_TX, (M7)}, /* uart2_tx */ {HDQ_SIO, (M3)}, /* gpio_127 */ {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */ {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */ |