soc: keystone_serdes: generalize to be used by other sub systems

SerDes driver is used by other sub systems like PCI, sRIO etc.
So modify it to be more general. The SerDes driver provides common
API's that can also be extended for other peripherals SerDes
configurations.

Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>

4 files changed, 156 insertions, 42 deletions

diff --git a/arch/arm/include/asm/ti-common/keystone_serdes.h b/arch/arm/include/asm/ti-common/keystone_serdes.h
index 2e12b05..2e92411 100644
--- a/arch/arm/include/asm/ti-common/keystone_serdes.h
+++ b/arch/arm/include/asm/ti-common/keystone_serdes.h
@@ -10,6 +10,46 @@
 #ifndef __TI_KEYSTONE_SERDES_H__
 #define __TI_KEYSTONE_SERDES_H__
 
-void ks2_serdes_sgmii_156p25mhz_setup(void);
+/* SERDES Reference clock */
+enum ks2_serdes_clock {
+	SERDES_CLOCK_100M,		/* 100 MHz */
+	SERDES_CLOCK_122P88M,		/* 122.88 MHz */
+	SERDES_CLOCK_125M,		/* 125 MHz */
+	SERDES_CLOCK_156P25M,		/* 156.25 MHz */
+	SERDES_CLOCK_312P5M,		/* 312.5 MHz */
+};
+
+/* SERDES Lane Baud Rate */
+enum ks2_serdes_rate {
+	SERDES_RATE_4P9152G,		/* 4.9152 GBaud */
+	SERDES_RATE_5G,			/* 5 GBaud */
+	SERDES_RATE_6P144G,		/* 6.144 GBaud */
+	SERDES_RATE_6P25G,		/* 6.25 GBaud */
+	SERDES_RATE_10p3125g,		/* 10.3215 GBaud */
+	SERDES_RATE_12p5g,		/* 12.5 GBaud */
+};
+
+/* SERDES Lane Rate Mode */
+enum ks2_serdes_rate_mode {
+	SERDES_FULL_RATE,
+	SERDES_HALF_RATE,
+	SERDES_QUARTER_RATE,
+};
+
+/* SERDES PHY TYPE */
+enum ks2_serdes_interface {
+	SERDES_PHY_SGMII,
+	SERDES_PHY_PCSR,		/* XGE SERDES */
+};
+
+struct ks2_serdes {
+	enum ks2_serdes_clock clk;
+	enum ks2_serdes_rate rate;
+	enum ks2_serdes_rate_mode rate_mode;
+	enum ks2_serdes_interface intf;
+	u32 loopback;
+};
+
+int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes);
 
 #endif /* __TI_KEYSTONE_SERDES_H__ */
diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c
index 63f3361..8a45fbd 100644
--- a/drivers/net/keystone_net.c
+++ b/drivers/net/keystone_net.c
@@ -554,7 +554,20 @@ int keystone2_emac_initialize(struct eth_priv_t *eth_priv)
 	return 0;
 }
 
+struct ks2_serdes ks2_serdes_sgmii_156p25mhz = {
+	.clk = SERDES_CLOCK_156P25M,
+	.rate = SERDES_RATE_5G,
+	.rate_mode = SERDES_QUARTER_RATE,
+	.intf = SERDES_PHY_SGMII,
+	.loopback = 0,
+};
+
 static void keystone2_net_serdes_setup(void)
 {
-	ks2_serdes_sgmii_156p25mhz_setup();
+	ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII_BASE,
+			&ks2_serdes_sgmii_156p25mhz,
+			CONFIG_KSNET_SERDES_LANES_PER_SGMII);
+
+	/* wait till setup */
+	udelay(5000);
 }
diff --git a/drivers/soc/keystone/keystone_serdes.c b/drivers/soc/keystone/keystone_serdes.c
index 3632c22..84ed9ba 100644
--- a/drivers/soc/keystone/keystone_serdes.c
+++ b/drivers/soc/keystone/keystone_serdes.c
@@ -7,9 +7,27 @@
  * SPDX-License-Identifier:     GPL-2.0+
  */
 
+#include <errno.h>
 #include <common.h>
+#include <asm/ti-common/keystone_serdes.h>
 
+#define SERDES_CMU_REGS(x)		(0x0000 + (0x0c00 * (x)))
 #define SERDES_LANE_REGS(x)		(0x0200 + (0x200 * (x)))
+#define SERDES_COMLANE_REGS		0x0a00
+#define SERDES_WIZ_REGS			0x1fc0
+
+#define SERDES_CMU_REG_000(x)		(SERDES_CMU_REGS(x) + 0x000)
+#define SERDES_CMU_REG_010(x)		(SERDES_CMU_REGS(x) + 0x010)
+#define SERDES_COMLANE_REG_000		(SERDES_COMLANE_REGS + 0x000)
+#define SERDES_LANE_REG_000(x)		(SERDES_LANE_REGS(x) + 0x000)
+#define SERDES_LANE_REG_028(x)		(SERDES_LANE_REGS(x) + 0x028)
+#define SERDES_LANE_CTL_STATUS_REG(x)	(SERDES_WIZ_REGS + 0x0020 + (4 * (x)))
+#define SERDES_PLL_CTL_REG		(SERDES_WIZ_REGS + 0x0034)
+
+#define SERDES_RESET			BIT(28)
+#define SERDES_LANE_RESET		BIT(29)
+#define SERDES_LANE_LOOPBACK		BIT(30)
+#define SERDES_LANE_EN_VAL(x, y, z)	(x[y] | (z << 26) | (z << 10))
 
 struct serdes_cfg {
 	u32 ofs;
@@ -17,6 +35,18 @@ struct serdes_cfg {
 	u32 mask;
 };
 
+/* SERDES PHY lane enable configuration value, indexed by PHY interface */
+static u32 serdes_cfg_lane_enable[] = {
+	0xf000f0c0,     /* SGMII */
+	0xf0e9f038,     /* PCSR */
+};
+
+/* SERDES PHY PLL enable configuration value, indexed by PHY interface  */
+static u32 serdes_cfg_pll_enable[] = {
+	0xe0000000,     /* SGMII */
+	0xee000000,     /* PCSR */
+};
+
 static struct serdes_cfg cfg_cmu_156p25m_5g[] = {
 	{0x0000, 0x00800000, 0xffff0000},
 	{0x0014, 0x00008282, 0x0000ffff},
@@ -91,39 +121,72 @@ static int ks2_serdes_init_156p25m_5g(u32 base, u32 num_lanes)
 	return 0;
 }
 
-void ks2_serdes_sgmii_156p25mhz_setup(void)
+static void ks2_serdes_cmu_comlane_enable(u32 base, struct ks2_serdes *serdes)
+{
+	/* Bring SerDes out of Reset */
+	ks2_serdes_rmw(base + SERDES_CMU_REG_010(0), 0x0, SERDES_RESET);
+	if (serdes->intf == SERDES_PHY_PCSR)
+		ks2_serdes_rmw(base + SERDES_CMU_REG_010(1), 0x0, SERDES_RESET);
+
+	/* Enable CMU and COMLANE */
+	ks2_serdes_rmw(base + SERDES_CMU_REG_000(0), 0x03, 0x000000ff);
+	if (serdes->intf == SERDES_PHY_PCSR)
+		ks2_serdes_rmw(base + SERDES_CMU_REG_000(1), 0x03, 0x000000ff);
+
+	ks2_serdes_rmw(base + SERDES_COMLANE_REG_000, 0x5f, 0x000000ff);
+}
+
+static void ks2_serdes_pll_enable(u32 base, struct ks2_serdes *serdes)
+{
+	writel(serdes_cfg_pll_enable[serdes->intf],
+	       base + SERDES_PLL_CTL_REG);
+}
+
+static void ks2_serdes_lane_reset(u32 base, u32 reset, u32 lane)
 {
-	unsigned int cnt;
-
-	ks2_serdes_init_156p25m_5g(CONFIG_KS2_SERDES_SGMII_BASE,
-				   CONFIG_KS2_SERDES_LANES_PER_SGMII);
-
-	/*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/
-	clrbits_le32(0x0232a010, 1 << 28);
-
-	/* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */
-	clrbits_le32(0x0232a228, 1 << 29);
-	writel(0xF800F8C0, 0x0232bfe0);
-	clrbits_le32(0x0232a428, 1 << 29);
-	writel(0xF800F8C0, 0x0232bfe4);
-	clrbits_le32(0x0232a628, 1 << 29);
-	writel(0xF800F8C0, 0x0232bfe8);
-	clrbits_le32(0x0232a828, 1 << 29);
-	writel(0xF800F8C0, 0x0232bfec);
-
-	/*Enable pll via the pll_ctrl 0x0014*/
-	writel(0xe0000000, 0x0232bff4)
-		;
-
-	/*Waiting for SGMII Serdes PLL lock.*/
-	for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--)
-		;
-	for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--)
-		;
-	for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--)
-		;
-	for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--)
-		;
-
-	udelay(45000);
+	if (reset)
+		ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane),
+			       0x1, SERDES_LANE_RESET);
+	else
+		ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane),
+			       0x0, SERDES_LANE_RESET);
+}
+
+static void ks2_serdes_lane_enable(u32 base,
+				   struct ks2_serdes *serdes, u32 lane)
+{
+	/* Bring lane out of reset */
+	ks2_serdes_lane_reset(base, 0, lane);
+
+	writel(SERDES_LANE_EN_VAL(serdes_cfg_lane_enable, serdes->intf,
+				  serdes->rate_mode),
+	       base + SERDES_LANE_CTL_STATUS_REG(lane));
+
+	/* Set NES bit if Loopback Enabled */
+	if (serdes->loopback)
+		ks2_serdes_rmw(base + SERDES_LANE_REG_000(lane),
+			       0x1, SERDES_LANE_LOOPBACK);
+}
+
+int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes)
+{
+	int i;
+	int ret = 0;
+
+	/* The driver currently supports 5GBaud rate with ref clock 156.25MHz */
+	if (serdes->clk == SERDES_CLOCK_156P25M)
+		if (serdes->rate == SERDES_RATE_5G)
+			ret = ks2_serdes_init_156p25m_5g(base, num_lanes);
+		else
+			return -EINVAL;
+	else
+		return -EINVAL;
+
+	ks2_serdes_cmu_comlane_enable(base, serdes);
+	for (i = 0; i < num_lanes; i++)
+		ks2_serdes_lane_enable(base, serdes, i);
+
+	ks2_serdes_pll_enable(base, serdes);
+
+	return ret;
 }
diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h
index 8037c3e..5ba975c 100644
--- a/include/configs/ks2_evm.h
+++ b/include/configs/ks2_evm.h
@@ -134,8 +134,10 @@
 #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE	KS2_NETCP_PDMA_TX_SND_QUEUE
 
 /* Keystone net */
-#define CONFIG_KSNET_MAC_ID_BASE	KS2_MAC_ID_BASE_ADDR
-#define CONFIG_KSNET_NETCP_BASE		KS2_NETCP_BASE
+#define CONFIG_KSNET_MAC_ID_BASE		KS2_MAC_ID_BASE_ADDR
+#define CONFIG_KSNET_NETCP_BASE			KS2_NETCP_BASE
+#define CONFIG_KSNET_SERDES_SGMII_BASE		KS2_SGMII_SERDES_BASE
+#define CONFIG_KSNET_SERDES_LANES_PER_SGMII	KS2_LANES_PER_SGMII_SERDES
 
 /* AEMIF */
 #define CONFIG_TI_AEMIF
@@ -319,8 +321,4 @@
    which is NOT applicable for DDR ECC test */
 #define CONFIG_MAX_UBOOT_MEM_SIZE	(4 << 20)	/* 4 MiB */
 
-/* SGMII SerDes */
-#define CONFIG_KS2_SERDES_SGMII_BASE		KS2_SGMII_SERDES_BASE
-#define CONFIG_KS2_SERDES_LANES_PER_SGMII	KS2_LANES_PER_SGMII_SERDES
-
 #endif /* __CONFIG_KS2_EVM_H */