sunxi: Add axp209 pmic support

Add support for the x-powers axp209 pmic which is found on most A10, A13 and
A20 boards.

And enable AXP209 support for the Cubietruck and Cubieboard boards.

Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

9 files changed, 215 insertions, 3 deletions

diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 543b809..8375711 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -12,6 +12,9 @@
  */
 
 #include <common.h>
+#ifdef CONFIG_AXP209_POWER
+#include <axp209.h>
+#endif
 #include <asm/arch/clock.h>
 #include <asm/arch/dram.h>
 #include <asm/arch/gpio.h>
@@ -116,12 +119,31 @@ void i2c_init_board(void)
 #ifdef CONFIG_SPL_BUILD
 void sunxi_board_init(void)
 {
+	int power_failed = 0;
 	unsigned long ramsize;
 
+#ifdef CONFIG_AXP209_POWER
+	power_failed |= axp209_init();
+	power_failed |= axp209_set_dcdc2(1400);
+	power_failed |= axp209_set_dcdc3(1250);
+	power_failed |= axp209_set_ldo2(3000);
+	power_failed |= axp209_set_ldo3(2800);
+	power_failed |= axp209_set_ldo4(2800);
+#endif
+
 	printf("DRAM:");
 	ramsize = sunxi_dram_init();
 	printf(" %lu MiB\n", ramsize >> 20);
 	if (!ramsize)
 		hang();
+
+	/*
+	 * Only clock up the CPU to full speed if we are reasonably
+	 * assured it's being powered with suitable core voltage
+	 */
+	if (!power_failed)
+		clock_set_pll1(CONFIG_CLK_FULL_SPEED);
+	else
+		printf("Failed to set core voltage! Can't set CPU frequency\n");
 }
 #endif
diff --git a/boards.cfg b/boards.cfg
index 759d331..8e6afe7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -378,9 +378,9 @@ Active  arm         armv7          s5pc1xx     samsung         goni
 Active  arm         armv7          s5pc1xx     samsung         smdkc100            smdkc100                              -                                                                                                                                 Minkyu Kang <mk7.kang@samsung.com>
 Active  arm         armv7          socfpga     altera          socfpga             socfpga_cyclone5                      -                                                                                                                                 -
 Active  arm         armv7          sunxi       -               sunxi               A13-OLinuXinoM                        sun5i:A13_OLINUXINOM,SPL,CONS_INDEX=2                                                                                             Hans de Goede <hdegoede@redhat.com>
-Active  arm         armv7          sunxi       -               sunxi               Cubieboard                            sun4i:CUBIEBOARD,SPL,SUNXI_EMAC                                                                                                   Hans de Goede <hdegoede@redhat.com>
-Active  arm         armv7          sunxi       -               sunxi               Cubietruck                            sun7i:CUBIETRUCK,SPL,SUNXI_GMAC,RGMII                                                                                             Ian Campbell <ijc@hellion.org.uk>:Hans de Goede <hdegoede@redhat.com>
-Active  arm         armv7          sunxi       -               sunxi               Cubietruck_FEL                        sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII                                                                                         Ian Campbell <ijc@hellion.org.uk>:Hans de Goede <hdegoede@redhat.com>
+Active  arm         armv7          sunxi       -               sunxi               Cubieboard                            sun4i:CUBIEBOARD,SPL,AXP209_POWER,SUNXI_EMAC                                                                                      Hans de Goede <hdegoede@redhat.com>
+Active  arm         armv7          sunxi       -               sunxi               Cubietruck                            sun7i:CUBIETRUCK,SPL,AXP209_POWER,SUNXI_GMAC,RGMII                                                                                Ian Campbell <ijc@hellion.org.uk>:Hans de Goede <hdegoede@redhat.com>
+Active  arm         armv7          sunxi       -               sunxi               Cubietruck_FEL                        sun7i:CUBIETRUCK,SPL_FEL,AXP209_POWER,SUNXI_GMAC,RGMII                                                                            Ian Campbell <ijc@hellion.org.uk>:Hans de Goede <hdegoede@redhat.com>
 Active  arm         armv7          sunxi       -               sunxi               r7-tv-dongle                          sun5i:R7DONGLE,SPL                                                                                                                Hans de Goede <hdegoede@redhat.com>
 Active  arm         armv7          u8500       st-ericsson     snowball            snowball                              -                                                                                                                                 Mathieu Poirier <mathieu.poirier@linaro.org>
 Active  arm         armv7          u8500       st-ericsson     u8500               u8500_href                            -                                                                                                                                 -
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 53ff97d..063ac8f 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -5,6 +5,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
+obj-$(CONFIG_AXP209_POWER)	+= axp209.o
 obj-$(CONFIG_EXYNOS_TMU)	+= exynos-tmu.o
 obj-$(CONFIG_FTPMU010_POWER)	+= ftpmu010.o
 obj-$(CONFIG_TPS6586X_POWER)	+= tps6586x.o
diff --git a/drivers/power/axp209.c b/drivers/power/axp209.c
new file mode 100644
index 0000000..9798e5b
--- /dev/null
+++ b/drivers/power/axp209.c
@@ -0,0 +1,167 @@
+/*
+ * (C) Copyright 2012
+ * Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <axp209.h>
+
+enum axp209_reg {
+	AXP209_POWER_STATUS = 0x00,
+	AXP209_CHIP_VERSION = 0x03,
+	AXP209_DCDC2_VOLTAGE = 0x23,
+	AXP209_DCDC3_VOLTAGE = 0x27,
+	AXP209_LDO24_VOLTAGE = 0x28,
+	AXP209_LDO3_VOLTAGE = 0x29,
+	AXP209_IRQ_STATUS5 = 0x4c,
+	AXP209_SHUTDOWN = 0x32,
+};
+
+#define AXP209_POWER_STATUS_ON_BY_DC	(1 << 0)
+
+#define AXP209_IRQ5_PEK_UP		(1 << 6)
+#define AXP209_IRQ5_PEK_DOWN		(1 << 5)
+
+#define AXP209_POWEROFF			(1 << 7)
+
+static int axp209_write(enum axp209_reg reg, u8 val)
+{
+	return i2c_write(0x34, reg, 1, &val, 1);
+}
+
+static int axp209_read(enum axp209_reg reg, u8 *val)
+{
+	return i2c_read(0x34, reg, 1, val, 1);
+}
+
+static u8 axp209_mvolt_to_cfg(int mvolt, int min, int max, int div)
+{
+	if (mvolt < min)
+		mvolt = min;
+	else if (mvolt > max)
+		mvolt = max;
+
+	return (mvolt - min) / div;
+}
+
+int axp209_set_dcdc2(int mvolt)
+{
+	int rc;
+	u8 cfg, current;
+
+	cfg = axp209_mvolt_to_cfg(mvolt, 700, 2275, 25);
+
+	/* Do we really need to be this gentle? It has built-in voltage slope */
+	while ((rc = axp209_read(AXP209_DCDC2_VOLTAGE, &current)) == 0 &&
+	       current != cfg) {
+		if (current < cfg)
+			current++;
+		else
+			current--;
+
+		rc = axp209_write(AXP209_DCDC2_VOLTAGE, current);
+		if (rc)
+			break;
+	}
+
+	return rc;
+}
+
+int axp209_set_dcdc3(int mvolt)
+{
+	u8 cfg = axp209_mvolt_to_cfg(mvolt, 700, 3500, 25);
+
+	return axp209_write(AXP209_DCDC3_VOLTAGE, cfg);
+}
+
+int axp209_set_ldo2(int mvolt)
+{
+	int rc;
+	u8 cfg, reg;
+
+	cfg = axp209_mvolt_to_cfg(mvolt, 1800, 3300, 100);
+
+	rc = axp209_read(AXP209_LDO24_VOLTAGE, &reg);
+	if (rc)
+		return rc;
+
+	/* LDO2 configuration is in upper 4 bits */
+	reg = (reg & 0x0f) | (cfg << 4);
+	return axp209_write(AXP209_LDO24_VOLTAGE, reg);
+}
+
+int axp209_set_ldo3(int mvolt)
+{
+	u8 cfg;
+
+	if (mvolt == -1)
+		cfg = 0x80;	/* determined by LDO3IN pin */
+	else
+		cfg = axp209_mvolt_to_cfg(mvolt, 700, 2275, 25);
+
+	return axp209_write(AXP209_LDO3_VOLTAGE, cfg);
+}
+
+int axp209_set_ldo4(int mvolt)
+{
+	int rc;
+	static const int vindex[] = {
+		1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2500,
+		2700, 2800, 3000, 3100, 3200, 3300
+	};
+	u8 cfg, reg;
+
+	/* Translate mvolt to register cfg value, requested <= selected */
+	for (cfg = 15; vindex[cfg] > mvolt && cfg > 0; cfg--);
+
+	rc = axp209_read(AXP209_LDO24_VOLTAGE, &reg);
+	if (rc)
+		return rc;
+
+	/* LDO4 configuration is in lower 4 bits */
+	reg = (reg & 0xf0) | (cfg << 0);
+	return axp209_write(AXP209_LDO24_VOLTAGE, reg);
+}
+
+int axp209_init(void)
+{
+	u8 ver;
+	int rc;
+
+	rc = axp209_read(AXP209_CHIP_VERSION, &ver);
+	if (rc)
+		return rc;
+
+	/* Low 4 bits is chip version */
+	ver &= 0x0f;
+
+	if (ver != 0x1)
+		return -1;
+
+	return 0;
+}
+
+int axp209_poweron_by_dc(void)
+{
+	u8 v;
+
+	if (axp209_read(AXP209_POWER_STATUS, &v))
+		return 0;
+
+	return (v & AXP209_POWER_STATUS_ON_BY_DC);
+}
+
+int axp209_power_button(void)
+{
+	u8 v;
+
+	if (axp209_read(AXP209_IRQ_STATUS5, &v))
+		return 0;
+
+	axp209_write(AXP209_IRQ_STATUS5, AXP209_IRQ5_PEK_DOWN);
+
+	return v & AXP209_IRQ5_PEK_DOWN;
+}
diff --git a/include/axp209.h b/include/axp209.h
new file mode 100644
index 0000000..21efce6
--- /dev/null
+++ b/include/axp209.h
@@ -0,0 +1,14 @@
+/*
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+extern int axp209_set_dcdc2(int mvolt);
+extern int axp209_set_dcdc3(int mvolt);
+extern int axp209_set_ldo2(int mvolt);
+extern int axp209_set_ldo3(int mvolt);
+extern int axp209_set_ldo4(int mvolt);
+extern int axp209_init(void);
+extern int axp209_poweron_by_dc(void);
+extern int axp209_power_button(void);
diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h
index 6560b65..037f995 100644
--- a/include/configs/sun4i.h
+++ b/include/configs/sun4i.h
@@ -12,6 +12,7 @@
  * A10 specific configuration
  */
 #define CONFIG_SUN4I		/* sun4i SoC generation */
+#define CONFIG_CLK_FULL_SPEED		1008000000
 
 #define CONFIG_SYS_PROMPT		"sun4i# "
 
diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h
index 43f0d67..c6138b7 100644
--- a/include/configs/sun5i.h
+++ b/include/configs/sun5i.h
@@ -12,6 +12,7 @@
  * High Level Configuration Options
  */
 #define CONFIG_SUN5I		/* sun5i SoC generation */
+#define CONFIG_CLK_FULL_SPEED		1008000000
 
 #define CONFIG_SYS_PROMPT		"sun5i# "
 
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index 9b693f7..d9be104 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -13,6 +13,7 @@
  * A20 specific configuration
  */
 #define CONFIG_SUN7I		/* sun7i SoC generation */
+#define CONFIG_CLK_FULL_SPEED		912000000
 
 #define CONFIG_SYS_PROMPT		"sun7i# "
 
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 42b0d2e..4083388 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -169,6 +169,11 @@
 #define CONFIG_SYS_I2C_SLAVE		0x7f
 #define CONFIG_CMD_I2C
 
+/* PMU */
+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER
+#define CONFIG_SPL_POWER_SUPPORT
+#endif
+
 #ifndef CONFIG_CONS_INDEX
 #define CONFIG_CONS_INDEX              1       /* UART0 */
 #endif