summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2012-07-31 10:50:01 -0700
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-09-01 14:58:13 +0200
commitdb7dd8109cad3ccdea23d2eebafe588f2ab585d6 (patch)
treefd91465a7ca98875dd631f9e787a1bf63b6a42c2
parent726c05d2cfc0f0062cc7a32c0e06ab775b43c04c (diff)
downloadu-boot-imx-db7dd8109cad3ccdea23d2eebafe588f2ab585d6.zip
u-boot-imx-db7dd8109cad3ccdea23d2eebafe588f2ab585d6.tar.gz
u-boot-imx-db7dd8109cad3ccdea23d2eebafe588f2ab585d6.tar.bz2
am33xx: Rework pinmux functions
- Move definition of the EEPROM contents to <asm/arch/sys_proto.h> - Make some defines a little less generic now. - Pinmux must be done by done by SPL now. - Create 3 pinmux functions, uart0, i2c0 and board. - Add pinmux specific to Starter Kit EVM for MMC now. Signed-off-by: Tom Rini <trini@ti.com>
-rw-r--r--arch/arm/cpu/armv7/am33xx/board.c32
-rw-r--r--arch/arm/include/asm/arch-am33xx/common_def.h26
-rw-r--r--arch/arm/include/asm/arch-am33xx/sys_proto.h28
-rw-r--r--board/ti/am335x/Makefile2
-rw-r--r--board/ti/am335x/mux.c58
5 files changed, 68 insertions, 78 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 0f16021..2ca4ca7 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -25,7 +25,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/common_def.h>
+#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <asm/omap_common.h>
#include <asm/emif.h>
@@ -58,29 +58,16 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-#define NO_OF_MAC_ADDR 3
-#define ETH_ALEN 6
-#define NAME_LEN 8
-
-struct am335x_baseboard_id {
- unsigned int magic;
- char name[NAME_LEN];
- char version[4];
- char serial[12];
- char config[32];
- char mac_addr[NO_OF_MAC_ADDR][ETH_ALEN];
-};
-
static struct am335x_baseboard_id __attribute__((section (".data"))) header;
static inline int board_is_bone(void)
{
- return !strncmp(header.name, "A335BONE", NAME_LEN);
+ return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
}
static inline int board_is_evm_sk(void)
{
- return !strncmp("A335X_SK", header.name, NAME_LEN);
+ return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
}
/*
@@ -207,21 +194,18 @@ void s_init(void)
if (read_eeprom() < 0)
puts("Could not get board ID.\n");
+ enable_board_pin_mux(&header);
if (board_is_evm_sk()) {
/*
* EVM SK 1.2A and later use gpio0_7 to enable DDR3.
* This is safe enough to do on older revs.
*/
- enable_gpio0_7_pin_mux();
gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
gpio_direction_output(GPIO_DDR_VTT_EN, 1);
}
config_ddr(board_memory_type());
#endif
-
- /* Enable MMC0 */
- enable_mmc0_pin_mux();
}
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
@@ -238,14 +222,10 @@ void setup_clocks_for_console(void)
}
/*
- * Basic board specific setup
+ * Basic board specific setup. Pinmux has been handled already.
*/
int board_init(void)
{
- enable_uart0_pin_mux();
-
- enable_i2c0_pin_mux();
- enable_i2c1_pin_mux();
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
if (read_eeprom() < 0)
puts("Could not get board ID.\n");
@@ -318,12 +298,10 @@ int board_eth_init(bd_t *bis)
}
if (board_is_bone()) {
- enable_mii1_pin_mux();
writel(MII_MODE_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
PHY_INTERFACE_MODE_MII;
} else {
- enable_rgmii1_pin_mux();
writel(RGMII_MODE_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
PHY_INTERFACE_MODE_RGMII;
diff --git a/arch/arm/include/asm/arch-am33xx/common_def.h b/arch/arm/include/asm/arch-am33xx/common_def.h
deleted file mode 100644
index 1fe6258..0000000
--- a/arch/arm/include/asm/arch-am33xx/common_def.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * common_def.h
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __COMMON_DEF_H__
-#define __COMMON_DEF_H__
-
-extern void enable_uart0_pin_mux(void);
-extern void enable_mmc0_pin_mux(void);
-extern void enable_gpio0_7_pin_mux(void);
-extern void enable_i2c0_pin_mux(void);
-extern void enable_mii1_pin_mux(void);
-extern void enable_rgmii1_pin_mux(void);
-
-#endif/*__COMMON_DEF_H__ */
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index eef5573..8a4b248 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -19,6 +19,24 @@
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
+/*
+ * AM335x parts define a system EEPROM that defines certain sub-fields.
+ * We use these fields to in turn see what board we are on, and what
+ * that might require us to set or not set.
+ */
+#define HDR_NO_OF_MAC_ADDR 3
+#define HDR_ETH_ALEN 6
+#define HDR_NAME_LEN 8
+
+struct am335x_baseboard_id {
+ unsigned int magic;
+ char name[HDR_NAME_LEN];
+ char version[4];
+ char serial[12];
+ char config[32];
+ char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN];
+};
+
#define BOARD_REV_ID 0x0
u32 get_cpu_rev(void);
@@ -31,4 +49,14 @@ int print_cpuinfo(void);
u32 get_device_type(void);
void setup_clocks_for_console(void);
void ddr_pll_config(unsigned int ddrpll_M);
+
+/*
+ * We have three pin mux functions that must exist. We must be able to enable
+ * uart0, for initial output and i2c0 to read the main EEPROM. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+void enable_board_pin_mux(struct am335x_baseboard_id *header);
#endif
diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile
index e3609bc..ca50eef 100644
--- a/board/ti/am335x/Makefile
+++ b/board/ti/am335x/Makefile
@@ -18,7 +18,9 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
+ifdef CONFIG_SPL_BUILD
COBJS := mux.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 9907d96..c7460eb 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -13,8 +13,8 @@
* GNU General Public License for more details.
*/
-#include <config.h>
-#include <asm/arch/common_def.h>
+#include <common.h>
+#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
#include <asm/io.h>
@@ -258,7 +258,6 @@ static struct module_pin_mux uart0_pin_mux[] = {
{-1},
};
-#ifdef CONFIG_MMC
static struct module_pin_mux mmc0_pin_mux[] = {
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
@@ -270,7 +269,17 @@ static struct module_pin_mux mmc0_pin_mux[] = {
{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */
{-1},
};
-#endif
+
+static struct module_pin_mux mmc0_pin_mux_sk_evm[] = {
+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
+ {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */
+ {-1},
+};
static struct module_pin_mux i2c0_pin_mux[] = {
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
@@ -349,34 +358,33 @@ void enable_uart0_pin_mux(void)
configure_module_pin_mux(uart0_pin_mux);
}
-#ifdef CONFIG_MMC
-void enable_mmc0_pin_mux(void)
-{
- configure_module_pin_mux(mmc0_pin_mux);
-}
-#endif
void enable_i2c0_pin_mux(void)
{
configure_module_pin_mux(i2c0_pin_mux);
}
-void enable_i2c1_pin_mux(void)
+void enable_board_pin_mux(struct am335x_baseboard_id *header)
{
+ /* Enable pinmux that is common to all TI boards. */
configure_module_pin_mux(i2c1_pin_mux);
-}
-
-void enable_rgmii1_pin_mux(void)
-{
- configure_module_pin_mux(rgmii1_pin_mux);
-}
-void enable_mii1_pin_mux(void)
-{
- configure_module_pin_mux(mii1_pin_mux);
-}
-
-void enable_gpio0_7_pin_mux(void)
-{
- configure_module_pin_mux(gpio0_7_pin_mux);
+ /* Now do board-specific muxes. */
+ if (!strncmp(header->name, "A335BONE", HDR_NAME_LEN)) {
+ /* Beaglebone pinmux */
+ configure_module_pin_mux(mii1_pin_mux);
+ configure_module_pin_mux(mmc0_pin_mux);
+ } else if (!strncmp(header->config, "SKU#01", 6)) {
+ /* General Purpose EVM */
+ configure_module_pin_mux(rgmii1_pin_mux);
+ configure_module_pin_mux(mmc0_pin_mux);
+ } else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) {
+ /* Starter Kit EVM */
+ configure_module_pin_mux(gpio0_7_pin_mux);
+ configure_module_pin_mux(rgmii1_pin_mux);
+ configure_module_pin_mux(mmc0_pin_mux_sk_evm);
+ } else {
+ puts("Unknown board, cannot configure pinmux.");
+ hang();
+ }
}