summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-03-27 12:09:35 +0000
committerwdenk <wdenk>2003-03-27 12:09:35 +0000
commitc021880ac5837154ca51b9d84e6b75f39b64aabe (patch)
tree5f9c3cce4dd7b49e69ec5007f58c9b9a2f215c15
parentac6dbb85b7f080d923013bff4e1d5267cb6f8a5a (diff)
downloadu-boot-imx-c021880ac5837154ca51b9d84e6b75f39b64aabe.zip
u-boot-imx-c021880ac5837154ca51b9d84e6b75f39b64aabe.tar.gz
u-boot-imx-c021880ac5837154ca51b9d84e6b75f39b64aabe.tar.bz2
* Add support for MIPS32 4Kc CPUs
* Add support for INCA-IP Board
-rw-r--r--CHANGELOG14
-rw-r--r--CREDITS2
-rw-r--r--MAKEALL10
-rw-r--r--board/incaip/Makefile41
-rw-r--r--board/incaip/config.mk32
-rw-r--r--board/incaip/flash.c671
-rw-r--r--board/incaip/incaip.c129
-rw-r--r--board/incaip/memsetup.S151
-rw-r--r--board/incaip/u-boot.lds64
-rw-r--r--cpu/mips/Makefile44
-rw-r--r--cpu/mips/cache.S265
-rw-r--r--cpu/mips/config.mk25
-rw-r--r--cpu/mips/cpu.c41
-rw-r--r--cpu/mips/incaip_clock.c107
-rw-r--r--cpu/mips/incaip_wdt.S73
-rw-r--r--cpu/mips/interrupts.c34
-rw-r--r--cpu/mips/serial.c282
-rw-r--r--cpu/mips/serial.h178
-rw-r--r--cpu/mips/start.S350
-rw-r--r--include/asm-mips/inca-ip.h2431
-rw-r--r--include/configs/incaip.h107
-rw-r--r--lib_mips/Makefile44
-rw-r--r--lib_mips/board.c403
-rw-r--r--lib_mips/mips_linux.c276
-rw-r--r--lib_mips/time.c103
25 files changed, 5874 insertions, 3 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 3beab35..2fa9a94 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -3,7 +3,9 @@ Changes since U-Boot 0.2.2:
======================================================================
* Patch by Rick Bronson, 16 Mar 2003:
- Add support for Atmel AT91RM9200DK w/NAND
+ - Add NAND flash support for reading, writing, and erasing NAND
+ flash (certain forms of which are called SmartMedia).
+ - Add support for Atmel AT91RM9200DK ARM920T based development kit.
* Patches by Robert Schwebel, 19 Mar 2003:
- use arm-linux-gcc as default compiler for ARM
@@ -36,6 +38,12 @@ Changes since U-Boot 0.2.2:
to existing PPC405GP designs.
- Clip udiv to 5 bits on PPC405 (serial.c).
+* Extend INCAIP board support:
+ - add automatic RAM size detection
+ - add "bdinfo" command
+ - pass flash address and size to Linux kernel
+ - switch to 150 MHz clock
+
* Avoid flicker on the TRAB's VFD by synchronizing the enable with
the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
boards, version 153 for Rev. 200 boards).
@@ -179,6 +187,10 @@ Changes since U-Boot 0.2.2:
* Patch by Stefan Roese, 10 Feb 2003:
Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
+* Add support for MIPS32 4Kc CPUs
+
+* Add support for INCA-IP Board
+
======================================================================
Changes for U-Boot 0.2.2:
======================================================================
diff --git a/CREDITS b/CREDITS
index 9139ccf..4a21310 100644
--- a/CREDITS
+++ b/CREDITS
@@ -48,7 +48,7 @@ D: 8xxrom-0.3.0
N: Rick Bronson
E: rick@efn.org
-D: Atmel AT91RM9200DK w/NAND support
+D: Atmel AT91RM9200DK and NAND support
N: David Brown
E: DBrown03@harris.com
diff --git a/MAKEALL b/MAKEALL
index e8d87e7..ba4d9eb 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -107,6 +107,14 @@ LIST_xscale="cradle csb226 innokom lubbock"
LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_xscale}"
+#########################################################################
+## MIPS 4Kc Systems
+#########################################################################
+
+LIST_mips4kc="incaip"
+
+LIST_mips="${LIST_mips4kc}"
+
#----- for now, just run PPC by default -----
[ $# = 0 ] && set $LIST_ppc
@@ -128,7 +136,7 @@ build_target() {
for arg in $@
do
case "$arg" in
- 8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|xscale)
+ 8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|xscale|mips)
for target in `eval echo '$LIST_'${arg}`
do
build_target ${target}
diff --git a/board/incaip/Makefile b/board/incaip/Makefile
new file mode 100644
index 0000000..ad59bf0
--- /dev/null
+++ b/board/incaip/Makefile
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+SOBJS = memsetup.o
+
+$(LIB): .depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/incaip/config.mk b/board/incaip/config.mk
new file mode 100644
index 0000000..0cecc01
--- /dev/null
+++ b/board/incaip/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# INCA-IP board with MIPS 4Kc CPU core
+#
+
+# ROM version
+TEXT_BASE = 0xB0000000
+
+# RAM version
+#TEXT_BASE = 0x80100000
diff --git a/board/incaip/flash.c b/board/incaip/flash.c
new file mode 100644
index 0000000..427f14a
--- /dev/null
+++ b/board/incaip/flash.c
@@ -0,0 +1,671 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/inca-ip.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
+ * has nothing to do with the flash chip being 8-bit or 16-bit.
+ */
+#ifdef CONFIG_FLASH_16BIT
+typedef unsigned short FLASH_PORT_WIDTH;
+typedef volatile unsigned short FLASH_PORT_WIDTHV;
+#define FLASH_ID_MASK 0xFFFF
+#else
+typedef unsigned long FLASH_PORT_WIDTH;
+typedef volatile unsigned long FLASH_PORT_WIDTHV;
+#define FLASH_ID_MASK 0xFFFFFFFF
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define ORMASK(size) ((-size) & OR_AM_MSK)
+
+#if 0
+#define FLASH_CYCLE1 0x0555
+#define FLASH_CYCLE2 0x02aa
+#else
+#define FLASH_CYCLE1 0x0554
+#define FLASH_CYCLE2 0x02ab
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(FPWV *addr, flash_info_t *info);
+static void flash_reset(flash_info_t *info);
+static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data);
+static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
+static void flash_get_offsets(ulong base, flash_info_t *info);
+static flash_info_t *flash_get_info(ulong base);
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+unsigned long flash_init (void)
+{
+ unsigned long size = 0;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2;
+ ulong * buscon = (ulong *)
+ ((i == 0) ? INCA_IP_EBU_EBU_BUSCON0 : INCA_IP_EBU_EBU_BUSCON2);
+
+ /* Disable write protection */
+ *buscon &= ~INCA_IP_EBU_EBU_BUSCON1_WRDIS;
+
+#if 1
+ memset(&flash_info[i], 0, sizeof(flash_info_t));
+#endif
+
+ flash_info[i].size =
+ flash_get_size((FPW *)flashbase, &flash_info[i]);
+
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n",
+ i, flash_info[i].size);
+ }
+
+ size += flash_info[i].size;
+ }
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ flash_get_info(CFG_MONITOR_BASE));
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+ flash_get_info(CFG_ENV_ADDR));
+#endif
+
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_reset(flash_info_t *info)
+{
+ FPWV *base = (FPWV *)(info->start[0]);
+
+ /* Put FLASH back in read mode */
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
+ *base = (FPW)0x00FF00FF; /* Intel Read Mode */
+ else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
+ *base = (FPW)0x00F000F0; /* AMD Read Mode */
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
+ && (info->flash_id & FLASH_BTYPE)) {
+ int bootsect_size; /* number of bytes/boot sector */
+ int sect_size; /* number of bytes/regular sector */
+
+ bootsect_size = 0x00002000 * (sizeof(FPW)/2);
+ sect_size = 0x00010000 * (sizeof(FPW)/2);
+
+ /* set sector offsets for bottom boot block type */
+ for (i = 0; i < 8; ++i) {
+ info->start[i] = base + (i * bootsect_size);
+ }
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + ((i - 7) * sect_size);
+ }
+ }
+ else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
+ && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
+
+ int sect_size; /* number of bytes/sector */
+
+ sect_size = 0x00010000 * (sizeof(FPW)/2);
+
+ /* set up sector start address table (uniform sector type) */
+ for( i = 0; i < info->sector_count; i++ )
+ info->start[i] = base + (i * sect_size);
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+static flash_info_t *flash_get_info(ulong base)
+{
+ int i;
+ flash_info_t * info;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+ info = & flash_info[i];
+ if (info->start[0] <= base && base < info->start[0] + info->size)
+ break;
+ }
+
+ return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+ uchar *boottype;
+ uchar *bootletter;
+ uchar *fmt;
+ uchar botbootletter[] = "B";
+ uchar topbootletter[] = "T";
+ uchar botboottype[] = "bottom boot sector";
+ uchar topboottype[] = "top boot sector";
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_STM: printf ("STM "); break;
+ case FLASH_MAN_INTEL: printf ("INTEL "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ /* check for top or bottom boot, if it applies */
+ if (info->flash_id & FLASH_BTYPE) {
+ boottype = botboottype;
+ bootletter = botbootletter;
+ }
+ else {
+ boottype = topboottype;
+ bootletter = topbootletter;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM640U:
+ fmt = "29LV641D (64 Mbit, uniform sectors)\n";
+ break;
+ case FLASH_28F800C3B:
+ case FLASH_28F800C3T:
+ fmt = "28F800C3%s (8 Mbit, %s)\n";
+ break;
+ case FLASH_INTEL800B:
+ case FLASH_INTEL800T:
+ fmt = "28F800B3%s (8 Mbit, %s)\n";
+ break;
+ case FLASH_28F160C3B:
+ case FLASH_28F160C3T:
+ fmt = "28F160C3%s (16 Mbit, %s)\n";
+ break;
+ case FLASH_INTEL160B:
+ case FLASH_INTEL160T:
+ fmt = "28F160B3%s (16 Mbit, %s)\n";
+ break;
+ case FLASH_28F320C3B:
+ case FLASH_28F320C3T:
+ fmt = "28F320C3%s (32 Mbit, %s)\n";
+ break;
+ case FLASH_INTEL320B:
+ case FLASH_INTEL320T:
+ fmt = "28F320B3%s (32 Mbit, %s)\n";
+ break;
+ case FLASH_28F640C3B:
+ case FLASH_28F640C3T:
+ fmt = "28F640C3%s (64 Mbit, %s)\n";
+ break;
+ case FLASH_INTEL640B:
+ case FLASH_INTEL640T:
+ fmt = "28F640B3%s (64 Mbit, %s)\n";
+ break;
+ default:
+ fmt = "Unknown Chip Type\n";
+ break;
+ }
+
+ printf (fmt, bootletter, boottype);
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20,
+ info->sector_count);
+
+ printf (" Sector Start Addresses:");
+
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+
+ printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+ulong flash_get_size (FPWV *addr, flash_info_t *info)
+{
+ /* Write auto select command: read Manufacturer ID */
+
+ /* Write auto select command sequence and test FLASH answer */
+ addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */
+ addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */
+ addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */
+
+ /* The manufacturer codes are only 1 byte, so just use 1 byte.
+ * This works for any bus width and any FLASH device width.
+ */
+ switch (addr[1] & 0xff) {
+
+ case (uchar)AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+
+ case (uchar)INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ break;
+ }
+
+ /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
+ if (info->flash_id != FLASH_UNKNOWN) switch (addr[0]) {
+
+ case (FPW)AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */
+ info->flash_id += FLASH_AM640U;
+ info->sector_count = 128;
+ info->size = 0x00800000 * (sizeof(FPW)/2);
+ break; /* => 8 or 16 MB */
+
+ case (FPW)INTEL_ID_28F800C3B:
+ info->flash_id += FLASH_28F800C3B;
+ info->sector_count = 23;
+ info->size = 0x00100000 * (sizeof(FPW)/2);
+ break; /* => 1 or 2 MB */
+
+ case (FPW)INTEL_ID_28F800B3B:
+ info->flash_id += FLASH_INTEL800B;
+ info->sector_count = 23;
+ info->size = 0x00100000 * (sizeof(FPW)/2);
+ break; /* => 1 or 2 MB */
+
+ case (FPW)INTEL_ID_28F160C3B:
+ info->flash_id += FLASH_28F160C3B;
+ info->sector_count = 39;
+ info->size = 0x00200000 * (sizeof(FPW)/2);
+ break; /* => 2 or 4 MB */
+
+ case (FPW)INTEL_ID_28F160B3B:
+ info->flash_id += FLASH_INTEL160B;
+ info->sector_count = 39;
+ info->size = 0x00200000 * (sizeof(FPW)/2);
+ break; /* => 2 or 4 MB */
+
+ case (FPW)INTEL_ID_28F320C3B:
+ info->flash_id += FLASH_28F320C3B;
+ info->sector_count = 71;
+ info->size = 0x00400000 * (sizeof(FPW)/2);
+ break; /* => 4 or 8 MB */
+
+ case (FPW)INTEL_ID_28F320B3B:
+ info->flash_id += FLASH_INTEL320B;
+ info->sector_count = 71;
+ info->size = 0x00400000 * (sizeof(FPW)/2);
+ break; /* => 4 or 8 MB */
+
+ case (FPW)INTEL_ID_28F640C3B:
+ info->flash_id += FLASH_28F640C3B;
+ info->sector_count = 135;
+ info->size = 0x00800000 * (sizeof(FPW)/2);
+ break; /* => 8 or 16 MB */
+
+ case (FPW)INTEL_ID_28F640B3B:
+ info->flash_id += FLASH_INTEL640B;
+ info->sector_count = 135;
+ info->size = 0x00800000 * (sizeof(FPW)/2);
+ break; /* => 8 or 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* => no or unknown flash */
+ }
+
+ flash_get_offsets((ulong)addr, info);
+
+ /* Put FLASH back in read mode */
+ flash_reset(info);
+
+ return (info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ FPWV *addr;
+ int flag, prot, sect;
+ int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
+ ulong start, now, last;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_INTEL800B:
+ case FLASH_INTEL160B:
+ case FLASH_INTEL320B:
+ case FLASH_INTEL640B:
+ case FLASH_28F800C3B:
+ case FLASH_28F160C3B:
+ case FLASH_28F320C3B:
+ case FLASH_28F640C3B:
+ case FLASH_AM640U:
+ break;
+ case FLASH_UNKNOWN:
+ default:
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ last = get_timer(0);
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
+
+ if (info->protect[sect] != 0) /* protected, skip it */
+ continue;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr = (FPWV *)(info->start[sect]);
+ if (intel) {
+ *addr = (FPW)0x00500050; /* clear status register */
+ *addr = (FPW)0x00200020; /* erase setup */
+ *addr = (FPW)0x00D000D0; /* erase confirm */
+ }
+ else {
+ /* must be AMD style if not Intel */
+ FPWV *base; /* first address in bank */
+
+ base = (FPWV *)(info->start[0]);
+ base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
+ base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
+ base[FLASH_CYCLE1] = (FPW)0x00800080; /* erase mode */
+ base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
+ base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
+ *addr = (FPW)0x00300030; /* erase sector */
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer(0);
+
+ /* wait at least 50us for AMD, 80us for Intel.
+ * Let's wait 1 ms.
+ */
+ udelay (1000);
+
+ while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+
+ if (intel) {
+ /* suspend erase */
+ *addr = (FPW)0x00B000B0;
+ }
+
+ flash_reset(info); /* reset to read mode */
+ rcode = 1; /* failed */
+ break;
+ }
+
+ /* show that we're waiting */
+ if ((get_timer(last)) > CFG_HZ) {/* every second */
+ putc ('.');
+ last = get_timer(0);
+ }
+ }
+
+ /* show that we're waiting */
+ if ((get_timer(last)) > CFG_HZ) { /* every second */
+ putc ('.');
+ last = get_timer(0);
+ }
+
+ flash_reset(info); /* reset to read mode */
+ }
+
+ printf (" done\n");
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
+ int bytes; /* number of bytes to program in current word */
+ int left; /* number of bytes left to program */
+ int i, res;
+
+ for (left = cnt, res = 0;
+ left > 0 && res == 0;
+ addr += sizeof(data), left -= sizeof(data) - bytes) {
+
+ bytes = addr & (sizeof(data) - 1);
+ addr &= ~(sizeof(data) - 1);
+
+ /* combine source and destination data so can program
+ * an entire word of 16 or 32 bits
+ */
+ for (i = 0; i < sizeof(data); i++) {
+ data <<= 8;
+ if (i < bytes || i - bytes >= left )
+ data += *((uchar *)addr + i);
+ else
+ data += *src++;
+ }
+
+ /* write one word to the flash */
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ res = write_word_amd(info, (FPWV *)addr, data);
+ break;
+ case FLASH_MAN_INTEL:
+ res = write_word_intel(info, (FPWV *)addr, data);
+ break;
+ default:
+ /* unknown flash type, error! */
+ printf ("missing or unknown FLASH type\n");
+ res = 1; /* not really a timeout, but gives error */
+ break;
+ }
+ }
+
+ return (res);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash for AMD FLASH
+ * A word is 16 or 32 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
+{
+ ulong start;
+ int flag;
+ int res = 0; /* result, assume success */
+ FPWV *base; /* first address in flash bank */
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest & data) != data) {
+ return (2);
+ }
+
+
+ base = (FPWV *)(info->start[0]);
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
+ base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
+ base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */
+
+ *dest = data; /* start programming the data */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer (0);
+
+ /* data polling for D7 */
+ while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *dest = (FPW)0x00F000F0; /* reset bank */
+ res = 1;
+ }
+ }
+
+ return (res);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash for Intel FLASH
+ * A word is 16 or 32 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
+{
+ ulong start;
+ int flag;
+ int res = 0; /* result, assume success */
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest & data) != data) {
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *dest = (FPW)0x00500050; /* clear status register */
+ *dest = (FPW)0x00FF00FF; /* make sure in read mode */
+ *dest = (FPW)0x00400040; /* program setup */
+
+ *dest = data; /* start programming the data */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer (0);
+
+ while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *dest = (FPW)0x00B000B0; /* Suspend program */
+ res = 1;
+ }
+ }
+
+ if (res == 0 && (*dest & (FPW)0x00100010))
+ res = 1; /* write failed, time out error is close enough */
+
+ *dest = (FPW)0x00500050; /* clear status register */
+ *dest = (FPW)0x00FF00FF; /* make sure in read mode */
+
+ return (res);
+}
diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c
new file mode 100644
index 0000000..72f1c21
--- /dev/null
+++ b/board/incaip/incaip.c
@@ -0,0 +1,129 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/addrspace.h>
+#include <asm/inca-ip.h>
+
+
+static ulong max_sdram_size(void)
+{
+ /* The only supported SDRAM data width is 16bit.
+ */
+#define CFG_DW 2
+
+ /* The only supported number of SDRAM banks is 4.
+ */
+#define CFG_NB 4
+
+ ulong cfgpb0 = *INCA_IP_SDRAM_MC_CFGPB0;
+ int cols = cfgpb0 & 0xF;
+ int rows = (cfgpb0 & 0xF0) >> 4;
+ ulong size = (1 << (rows + cols)) * CFG_DW * CFG_NB;
+
+ return size;
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size(long int *base, long int maxsize)
+{
+ volatile long int *addr;
+ ulong cnt, val;
+ ulong save[32]; /* to make test non-destructive */
+ unsigned char i = 0;
+
+ for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ save[i++] = *addr;
+ *addr = ~cnt;
+ }
+
+ /* write 0 to base address */
+ addr = base;
+ save[i] = *addr;
+ *addr = 0;
+
+ /* check at base address */
+ if ((val = *addr) != 0) {
+ *addr = save[i];
+ return (0);
+ }
+
+ for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ val = *addr;
+ *addr = save[--i];
+
+ if (val != (~cnt)) {
+ return (cnt * sizeof (long));
+ }
+ }
+ return (maxsize);
+}
+
+long int initdram(int board_type)
+{
+ int rows, cols, best_val = *INCA_IP_SDRAM_MC_CFGPB0;
+ ulong size, max_size = 0;
+ ulong our_address;
+
+ asm volatile ("move %0, $25" : "=r" (our_address) :);
+
+ /* Can't probe for RAM size unless we are running from Flash.
+ */
+ if (PHYSADDR(our_address) < PHYSADDR(PHYS_FLASH_1))
+ {
+ return max_sdram_size();
+ }
+
+ for (cols = 0x8; cols <= 0xC; cols++)
+ {
+ for (rows = 0xB; rows <= 0xD; rows++)
+ {
+ *INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) |
+ (rows << 4) | cols;
+ size = dram_size((ulong *)CFG_SDRAM_BASE,
+ max_sdram_size());
+
+ if (size > max_size)
+ {
+ best_val = *INCA_IP_SDRAM_MC_CFGPB0;
+ max_size = size;
+ }
+ }
+ }
+
+ *INCA_IP_SDRAM_MC_CFGPB0 = best_val;
+ return max_size;
+}
+
diff --git a/board/incaip/memsetup.S b/board/incaip/memsetup.S
new file mode 100644
index 0000000..4faf627
--- /dev/null
+++ b/board/incaip/memsetup.S
@@ -0,0 +1,151 @@
+/*
+ * Memory sub-system initialization code for INCA-IP development board.
+ *
+ * Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+
+#define EBU_MODUL_BASE 0xB8000200
+#define EBU_CLC(value) 0x0000(value)
+#define EBU_CON(value) 0x0010(value)
+#define EBU_ADDSEL0(value) 0x0020(value)
+#define EBU_ADDSEL1(value) 0x0024(value)
+#define EBU_ADDSEL2(value) 0x0028(value)
+#define EBU_BUSCON0(value) 0x0060(value)
+#define EBU_BUSCON1(value) 0x0064(value)
+#define EBU_BUSCON2(value) 0x0068(value)
+
+#define MC_MODUL_BASE 0xBF800000
+#define MC_ERRCAUSE(value) 0x0100(value)
+#define MC_ERRADDR(value) 0x0108(value)
+#define MC_IOGP(value) 0x0800(value)
+#define MC_SELFRFSH(value) 0x0A00(value)
+#define MC_CTRLENA(value) 0x1000(value)
+#define MC_MRSCODE(value) 0x1008(value)
+#define MC_CFGDW(value) 0x1010(value)
+#define MC_CFGPB0(value) 0x1018(value)
+#define MC_LATENCY(value) 0x1038(value)
+#define MC_TREFRESH(value) 0x1040(value)
+
+#if CPU_CLOCK_RATE==150000000 /* 150 MHz clock for the MIPS core */
+#define CGU_MODUL_BASE 0xBF107000
+#define CGU_PLL1CR(value) 0x0008(value)
+#define CGU_DIVCR(value) 0x0010(value)
+#define CGU_MUXCR(value) 0x0014(value)
+#define CGU_PLL1SR(value) 0x000C(value)
+#endif
+
+ .globl memsetup
+memsetup:
+
+ /* EBU Initialization for the Flash CS0 and CS2.
+ */
+ li t0, EBU_MODUL_BASE
+
+ li t1, 0xA0000041
+ sw t1, EBU_ADDSEL0(t0)
+
+#if CPU_CLOCK_RATE==150000000 /* 150 MHz clock for the MIPS core */
+ li t1, 0xE841417E
+ sw t1, EBU_BUSCON0(t0) /* value set up by magic flash word */
+ sw t1, EBU_BUSCON2(t0)
+#else /* 100 MHz */
+ lw t1, EBU_BUSCON0(t0) /* value set up by magic flash word */
+ sw t1, EBU_BUSCON2(t0)
+#endif
+
+ li t1, 0xA0800041
+ sw t1, EBU_ADDSEL2(t0)
+
+ /* Need to initialize CS1 too, so as to to prevent overlapping with
+ * Flash bank 1.
+ */
+ li t1, 0xBE0000F1
+ sw t1, EBU_ADDSEL1(t0)
+
+#if CPU_CLOCK_RATE==150000000 /* 150 MHz clock for the MIPS core */
+ li t1, 0x684143FD
+#else /* 100 MHz */
+ li t1, 0x684142BD
+#endif
+ sw t1, EBU_BUSCON1(t0)
+
+#if CPU_CLOCK_RATE==150000000 /* 150 MHz clock for the MIPS core */
+ li t0, CGU_MODUL_BASE
+ li t1, 0x80000017
+ sw t1, CGU_DIVCR(t0)
+ li t1, 0xC00B0001
+ sw t1, CGU_PLL1CR(t0)
+ lui t2, 0x8000
+b1:
+ lw t1, CGU_PLL1SR(t0)
+ and t1, t1, t2
+ beq t1, zero, b1
+ li t1, 0x80000001
+ sw t1, CGU_MUXCR(t0)
+#endif
+
+ /* SDRAM Initialization.
+ */
+ li t0, MC_MODUL_BASE
+
+ /* Clear Error log registers */
+ sw zero, MC_ERRCAUSE(t0)
+ sw zero, MC_ERRADDR(t0)
+
+ /* Set clock ratio to 1:1 */
+ li t1, 0x03 /* clkrat=1:1, rddel=3 */
+ sw t1, MC_IOGP(t0)
+
+ /* Clear Power-down registers */
+ sw zero, MC_SELFRFSH(t0)
+
+ /* Set CAS Latency */
+ li t1, 0x00000020 /* CL = 2 */
+ sw t1, MC_MRSCODE(t0)
+
+ /* Set word width to 16 bit */
+ li t1, 0x2
+ sw t1, MC_CFGDW(t0)
+
+ /* Set CS0 to SDRAM parameters */
+ li t1, 0x000014C9
+ sw t1, MC_CFGPB0(t0)
+
+ /* Set SDRAM latency parameters */
+ li t1, 0x00026325 /* BC PC100 */
+ sw t1, MC_LATENCY(t0)
+
+ /* Set SDRAM refresh rate */
+ li t1, 0x00000C30 /* 4K/64ms @ 100MHz */
+ sw t1, MC_TREFRESH(t0)
+
+ /* Finally enable the controller */
+ li t1, 1
+ sw t1, MC_CTRLENA(t0)
+
+ j ra
+ nop
+
diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds
new file mode 100644
index 0000000..3c9ca89
--- /dev/null
+++ b/board/incaip/u-boot.lds
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .sdata : { *(.sdata) }
+
+ _gp = ALIGN(16);
+
+ __got_start = .;
+ .got : { *(.got) }
+ __got_end = .;
+
+ .sdata : { *(.sdata) }
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start) >> 2;
+
+ . = ALIGN(4);
+ .sbss : { *(.sbss) }
+ .bss : { *(.bss) }
+ uboot_end = .;
+}
diff --git a/cpu/mips/Makefile b/cpu/mips/Makefile
new file mode 100644
index 0000000..91008bf
--- /dev/null
+++ b/cpu/mips/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(CPU).a
+
+START = start.o
+OBJS = interrupts.o cpu.o incaip_clock.o serial.o
+SOBJS = incaip_wdt.o cache.o
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/mips/cache.S b/cpu/mips/cache.S
new file mode 100644
index 0000000..aeb04b3
--- /dev/null
+++ b/cpu/mips/cache.S
@@ -0,0 +1,265 @@
+/*
+ * Cache-handling routined for MIPS 4K CPUs
+ *
+ * Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/cacheops.h>
+
+
+ /* 16KB is the maximum size of instruction and data caches on
+ * MIPS 4K.
+ */
+#define MIPS_MAX_CACHE_SIZE 0x4000
+
+
+/*
+ * cacheop macro to automate cache operations
+ * first some helpers...
+ */
+#define _mincache(size, maxsize) \
+ bltu size,maxsize,9f ; \
+ move size,maxsize ; \
+9:
+
+#define _align(minaddr, maxaddr, linesize) \
+ .set noat ; \
+ subu AT,linesize,1 ; \
+ not AT ; \
+ and minaddr,AT ; \
+ addu maxaddr,-1 ; \
+ and maxaddr,AT ; \
+ .set at
+
+/* general operations */
+#define doop1(op1) \
+ cache op1,0(a0)
+#define doop2(op1, op2) \
+ cache op1,0(a0) ; \
+ nop ; \
+ cache op2,0(a0)
+
+/* specials for cache initialisation */
+#define doop1lw(op1) \
+ lw zero,0(a0)
+#define doop1lw1(op1) \
+ cache op1,0(a0) ; \
+ lw zero,0(a0) ; \
+ cache op1,0(a0)
+#define doop121(op1,op2) \
+ cache op1,0(a0) ; \
+ nop; \
+ cache op2,0(a0) ; \
+ nop; \
+ cache op1,0(a0)
+
+#define _oploopn(minaddr, maxaddr, linesize, tag, ops) \
+ .set noreorder ; \
+10: doop##tag##ops ; \
+ bne minaddr,maxaddr,10b ; \
+ add minaddr,linesize ; \
+ .set reorder
+
+/* finally the cache operation macros */
+#define vcacheopn(kva, n, cacheSize, cacheLineSize, tag, ops) \
+ blez n,11f ; \
+ addu n,kva ; \
+ _align(kva, n, cacheLineSize) ; \
+ _oploopn(kva, n, cacheLineSize, tag, ops) ; \
+11:
+
+#define icacheopn(kva, n, cacheSize, cacheLineSize, tag, ops) \
+ _mincache(n, cacheSize); \
+ blez n,11f ; \
+ addu n,kva ; \
+ _align(kva, n, cacheLineSize) ; \
+ _oploopn(kva, n, cacheLineSize, tag, ops) ; \
+11:
+
+#define vcacheop(kva, n, cacheSize, cacheLineSize, op) \
+ vcacheopn(kva, n, cacheSize, cacheLineSize, 1, (op))
+
+#define icacheop(kva, n, cacheSize, cacheLineSize, op) \
+ icacheopn(kva, n, cacheSize, cacheLineSize, 1, (op))
+
+/*******************************************************************************
+*
+* mips_cache_reset - low level initialisation of the primary caches
+*
+* This routine initialises the primary caches to ensure that they
+* have good parity. It must be called by the ROM before any cached locations
+* are used to prevent the possibility of data with bad parity being written to
+* memory.
+* To initialise the instruction cache it is essential that a source of data
+* with good parity is available. This routine
+* will initialise an area of memory starting at location zero to be used as
+* a source of parity.
+*
+* RETURNS: N/A
+*
+*/
+ .globl mips_cache_reset
+ .ent mips_cache_reset
+mips_cache_reset:
+
+ li t2, CFG_ICACHE_SIZE
+ li t3, CFG_DCACHE_SIZE
+ li t4, CFG_CACHELINE_SIZE
+ move t5, t4
+
+
+ li v0, MIPS_MAX_CACHE_SIZE
+
+ /* Now clear that much memory starting from zero.
+ */
+
+ li a0, KSEG1
+ addu a1, a0, v0
+
+2: sw zero, 0(a0)
+ sw zero, 4(a0)
+ sw zero, 8(a0)
+ sw zero, 12(a0)
+ sw zero, 16(a0)
+ sw zero, 20(a0)
+ sw zero, 24(a0)
+ sw zero, 28(a0)
+ addu a0, 32
+ bltu a0, a1, 2b
+
+ /* Set invalid tag.
+ */
+
+ mtc0 zero, CP0_TAGLO
+
+ /*
+ * The caches are probably in an indeterminate state,
+ * so we force good parity into them by doing an
+ * invalidate, load/fill, invalidate for each line.
+ */
+
+ /* Assume bottom of RAM will generate good parity for the cache.
+ */
+
+ li a0, K0BASE
+ move a2, t2 # icacheSize
+ move a3, t4 # icacheLineSize
+ move a1, a2
+ icacheopn(a0,a1,a2,a3,121,(Index_Store_Tag_I,Fill))
+
+ /* To support Orion/R4600, we initialise the data cache in 3 passes.
+ */
+
+ /* 1: initialise dcache tags.
+ */
+
+ li a0, K0BASE
+ move a2, t3 # dcacheSize
+ move a3, t5 # dcacheLineSize
+ move a1, a2
+ icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
+
+ /* 2: fill dcache.
+ */
+
+ li a0, K0BASE
+ move a2, t3 # dcacheSize
+ move a3, t5 # dcacheLineSize
+ move a1, a2
+ icacheopn(a0,a1,a2,a3,1lw,(dummy))
+
+ /* 3: clear dcache tags.
+ */
+
+ li a0, K0BASE
+ move a2, t3 # dcacheSize
+ move a3, t5 # dcacheLineSize
+ move a1, a2
+ icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
+
+ j ra
+ .end mips_cache_reset
+
+
+/*******************************************************************************
+*
+* dcache_status - get cache status
+*
+* RETURNS: 0 - cache disabled; 1 - cache enabled
+*
+*/
+ .globl dcache_status
+ .ent dcache_status
+dcache_status:
+
+ mfc0 v0, CP0_CONFIG
+ andi v0, v0, 1
+ j ra
+
+ .end dcache_status
+
+/*******************************************************************************
+*
+* dcache_disable - disable cache
+*
+* RETURNS: N/A
+*
+*/
+ .globl dcache_disable
+ .ent dcache_disable
+dcache_disable:
+
+ mfc0 t0, CP0_CONFIG
+ li t1, -8
+ and t0, t0, t1
+ ori t0, t0, CONF_CM_UNCACHED
+ mtc0 t0, CP0_CONFIG
+ j ra
+
+ .end dcache_disable
+
+
+/*******************************************************************************
+*
+* mips_cache_lock - lock RAM area pointed to by a0 in cache.
+*
+* RETURNS: N/A
+*
+*/
+ .globl mips_cache_lock
+ .ent mips_cache_lock
+mips_cache_lock:
+ li a1, K0BASE - CFG_DCACHE_SIZE
+ addu a0, a1
+ li a2, CFG_DCACHE_SIZE
+ li a3, CFG_CACHELINE_SIZE
+ move a1, a2
+ icacheop(a0,a1,a2,a3,0x1d)
+
+ j ra
+ .end mips_cache_lock
+
diff --git a/cpu/mips/config.mk b/cpu/mips/config.mk
new file mode 100644
index 0000000..4ea6617
--- /dev/null
+++ b/cpu/mips/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_CPPFLAGS += -mcpu=4kc -EB -mabicalls
+
diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
new file mode 100644
index 0000000..3fc3916
--- /dev/null
+++ b/cpu/mips/cpu.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/inca-ip.h>
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+#ifdef CONFIG_INCA_IP
+ *INCA_IP_WDT_RST_REQ = 0x3f;
+#endif
+ fprintf(stderr, "*** reset failed ***\n");
+ return 0;
+}
+
+void flush_cache (ulong start_addr, ulong size)
+{
+
+}
+
diff --git a/cpu/mips/incaip_clock.c b/cpu/mips/incaip_clock.c
new file mode 100644
index 0000000..7fc6eb0
--- /dev/null
+++ b/cpu/mips/incaip_clock.c
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/inca-ip.h>
+
+
+
+/*******************************************************************************
+*
+* get_cpuclk - returns the frequency of the CPU.
+*
+* Gets the value directly from the INCA-IP hardware.
+*
+* RETURNS:
+* 150.000.000 for 150 MHz
+* 130.000.000. for 130 Mhz
+* 100.000.000. for 100 Mhz
+* NOTE:
+* This functions should be used by the hardware driver to get the correct
+* frequency of the CPU. Don't use the macros, which are set to init the CPU
+* frequency in the ROM code.
+*/
+uint incaip_get_cpuclk(void)
+{
+ /*-------------------------------------------------------------------------*/
+ /* CPU Clock Input Multiplexer (MUX I) */
+ /* Multiplexer MUX I selects the maximum input clock to the CPU. */
+ /*-------------------------------------------------------------------------*/
+ if (*((volatile ulong*)INCA_IP_CGU_CGU_MUXCR) & INCA_IP_CGU_CGU_MUXCR_MUXI)
+ {
+ /* MUX I set to 150 MHz clock */
+ return 150000000;
+ }
+ else
+ {
+ /* MUX I set to 100/133 MHz clock */
+ if (*((volatile ulong*)INCA_IP_CGU_CGU_DIVCR) & 0x40)
+ {
+ /* Division value is 1/3, maximum CPU operating */
+ /* frequency is 133.3 MHz */
+ return 130000000;
+ }
+ else
+ {
+ /* Division value is 1/4, maximum CPU operating */
+ /* frequency is 100 MHz */
+ return 100000000;
+ }
+ }
+}
+
+/*******************************************************************************
+*
+* get_fpiclk - returns the frequency of the FPI bus.
+*
+* Gets the value directly from the INCA-IP hardware.
+*
+* RETURNS: Frquency in Hz
+*
+* NOTE:
+* This functions should be used by the hardware driver to get the correct
+* frequency of the CPU. Don't use the macros, which are set to init the CPU
+* frequency in the ROM code.
+* The calculation for the
+*/
+uint incaip_get_fpiclk(void)
+{
+ uint clkCPU;
+
+ clkCPU = incaip_get_cpuclk();
+
+ switch (*((volatile ulong*)INCA_IP_CGU_CGU_DIVCR) & 0xC)
+ {
+ case 0x4:
+ return clkCPU >> 1; /* devided by 2 */
+ break;
+ case 0x8:
+ return clkCPU >> 2; /* devided by 4 */
+ break;
+ default:
+ return clkCPU;
+ break;
+ }
+}
+
+
diff --git a/cpu/mips/incaip_wdt.S b/cpu/mips/incaip_wdt.S
new file mode 100644
index 0000000..9455569
--- /dev/null
+++ b/cpu/mips/incaip_wdt.S
@@ -0,0 +1,73 @@
+/*
+ * INCA-IP Watchdog timer management code.
+ *
+ * Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+
+#define WD_BASE 0xb8000000
+#define WD_CON0(value) 0x0020(value)
+#define WD_CON1(value) 0x0024(value)
+#define WD_DISABLE 0x00000008
+#define WD_ENABLE 0x00000000
+#define WD_WRITE_PW 0xFFFC00F8
+#define WD_WRITE_ENDINIT 0xFFFC00F3
+#define WD_WRITE_INIT 0xFFFC00F2
+
+
+ .globl disable_incaip_wdt
+disable_incaip_wdt:
+ li t0, WD_BASE
+
+ /* Calculate password.
+ */
+ lw t2, WD_CON1(t0)
+ and t2, 0xC
+
+ lw t3, WD_CON0(t0)
+ and t3, 0xFFFFFF01
+
+ or t3, t2
+ or t3, 0xF0
+
+ sw t3, WD_CON0(t0) /* write password */
+
+ /* Clear ENDINIT.
+ */
+ li t1, WD_WRITE_INIT
+ sw t1, WD_CON0(t0)
+
+
+ li t1, WD_DISABLE
+ sw t1, WD_CON1(t0) /* disable watchdog */
+ li t1, WD_WRITE_PW
+ sw t1, WD_CON0(t0) /* write password */
+ li t1, WD_WRITE_ENDINIT
+ sw t1, WD_CON0(t0) /* end command */
+
+ j ra
+ nop
+
diff --git a/cpu/mips/interrupts.c b/cpu/mips/interrupts.c
new file mode 100644
index 0000000..0490a76
--- /dev/null
+++ b/cpu/mips/interrupts.c
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+void enable_interrupts(void)
+{
+}
+
+int disable_interrupts(void)
+{
+ return 0;
+}
+
diff --git a/cpu/mips/serial.c b/cpu/mips/serial.c
new file mode 100644
index 0000000..ebda509
--- /dev/null
+++ b/cpu/mips/serial.c
@@ -0,0 +1,282 @@
+/*
+ * (INCA) ASC UART support
+ */
+
+#include <common.h>
+#include <asm/inca-ip.h>
+#include "serial.h"
+
+#define SET_BIT(reg, mask) reg |= (mask)
+#define CLEAR_BIT(reg, mask) reg &= (~mask)
+#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
+#define SET_BITS(reg, mask) SET_BIT(reg, mask)
+#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
+
+extern uint incaip_get_fpiclk(void);
+
+static int serial_setopt (void);
+
+/* pointer to ASC register base address */
+static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC;
+
+/******************************************************************************
+*
+* serial_init - initialize a INCAASC channel
+*
+* This routine initializes the number of data bits, parity
+* and set the selected baud rate. Interrupts are disabled.
+* Set the modem control signals if the option is selected.
+*
+* RETURNS: N/A
+*/
+
+int serial_init (void)
+{
+ /* we have to set PMU.EN13 bit to enable an ASC device*/
+ INCAASC_PMU_ENABLE(13);
+
+ /* and we have to set CLC register*/
+ CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
+ SET_BITFIELD(pAsc->asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001);
+
+ /* initialy we are in async mode */
+ pAsc->asc_con = ASCCON_M_8ASYNC;
+
+ /* select input port */
+ pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
+
+ /* TXFIFO's filling level */
+ SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
+ ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL);
+ /* enable TXFIFO */
+ SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXFEN);
+
+ /* RXFIFO's filling level */
+ SET_BITFIELD(pAsc->asc_txfcon, ASCRXFCON_RXFITLMASK,
+ ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL);
+ /* enable RXFIFO */
+ SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
+
+ /* enable error signals */
+ SET_BIT(pAsc->asc_con, ASCCON_FEN);
+ SET_BIT(pAsc->asc_con, ASCCON_OEN);
+
+ /* acknowledge ASC interrupts */
+ ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL);
+
+ /* disable ASC interrupts */
+ ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL);
+
+ /* set FIFOs into the transparent mode */
+ SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN);
+ SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN);
+
+ /* set baud rate */
+ serial_setbrg();
+
+ /* set the options */
+ serial_setopt();
+
+ return 0;
+}
+
+void serial_setbrg (void)
+{
+ ulong uiReloadValue, fdv;
+ ulong f_ASC;
+
+ f_ASC = incaip_get_fpiclk();
+
+#ifndef INCAASC_USE_FDV
+ fdv = 2;
+ uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
+#else
+ fdv = INCAASC_FDV_HIGH_BAUDRATE;
+ uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
+#endif /* INCAASC_USE_FDV */
+
+ if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
+ {
+#ifndef INCAASC_USE_FDV
+ fdv = 3;
+ uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
+#else
+ fdv = INCAASC_FDV_LOW_BAUDRATE;
+ uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
+#endif /* INCAASC_USE_FDV */
+
+ if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
+ {
+ return; /* can't impossibly generate that baud rate */
+ }
+ }
+
+ /* Disable Baud Rate Generator; BG should only be written when R=0 */
+ CLEAR_BIT(pAsc->asc_con, ASCCON_R);
+
+#ifndef INCAASC_USE_FDV
+ /*
+ * Disable Fractional Divider (FDE)
+ * Divide clock by reload-value + constant (BRS)
+ */
+ /* FDE = 0 */
+ CLEAR_BIT(pAsc->asc_con, ASCCON_FDE);
+
+ if ( fdv == 2 )
+ CLEAR_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 0 */
+ else
+ SET_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 1 */
+
+#else /* INCAASC_USE_FDV */
+
+ /* Enable Fractional Divider */
+ SET_BIT(pAsc->asc_con, ASCCON_FDE); /* FDE = 1 */
+
+ /* Set fractional divider value */
+ pAsc->asc_fdv = fdv & ASCFDV_VALUE_MASK;
+
+#endif /* INCAASC_USE_FDV */
+
+ /* Set reload value in BG */
+ pAsc->asc_bg = uiReloadValue;
+
+ /* Enable Baud Rate Generator */
+ SET_BIT(pAsc->asc_con, ASCCON_R); /* R = 1 */
+}
+
+/*******************************************************************************
+*
+* serial_setopt - set the serial options
+*
+* Set the channel operating mode to that specified. Following options
+* are supported: CREAD, CSIZE, PARENB, and PARODD.
+*
+* Note, this routine disables the transmitter. The calling routine
+* may have to re-enable it.
+*
+* RETURNS:
+* Returns 0 to indicate success, otherwise -1 is returned
+*/
+
+static int serial_setopt (void)
+{
+ ulong con;
+
+ switch ( ASC_OPTIONS & ASCOPT_CSIZE )
+ {
+ /* 7-bit-data */
+ case ASCOPT_CS7:
+ con = ASCCON_M_7ASYNCPAR; /* 7-bit-data and parity bit */
+ break;
+
+ /* 8-bit-data */
+ case ASCOPT_CS8:
+ if ( ASC_OPTIONS & ASCOPT_PARENB )
+ con = ASCCON_M_8ASYNCPAR; /* 8-bit-data and parity bit */
+ else
+ con = ASCCON_M_8ASYNC; /* 8-bit-data no parity */
+ break;
+
+ /*
+ * only 7 and 8-bit frames are supported
+ * if we don't use IOCTL extensions
+ */
+ default:
+ return -1;
+ }
+
+ if ( ASC_OPTIONS & ASCOPT_STOPB )
+ SET_BIT(con, ASCCON_STP); /* 2 stop bits */
+ else
+ CLEAR_BIT(con, ASCCON_STP); /* 1 stop bit */
+
+ if ( ASC_OPTIONS & ASCOPT_PARENB )
+ SET_BIT(con, ASCCON_PEN); /* enable parity checking */
+ else
+ CLEAR_BIT(con, ASCCON_PEN); /* disable parity checking */
+
+ if ( ASC_OPTIONS & ASCOPT_PARODD )
+ SET_BIT(con, ASCCON_ODD); /* odd parity */
+ else
+ CLEAR_BIT(con, ASCCON_ODD); /* even parity */
+
+ if ( ASC_OPTIONS & ASCOPT_CREAD )
+ SET_BIT(pAsc->asc_whbcon, ASCWHBCON_SETREN); /* Receiver enable */
+
+ pAsc->asc_con |= con;
+
+ return 0;
+}
+
+void serial_putc (const char c)
+{
+ uint txFl = 0;
+
+ if (c == '\n') serial_putc ('\r');
+
+ /* check do we have a free space in the TX FIFO */
+ /* get current filling level */
+ do
+ {
+ txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
+ }
+ while ( txFl == INCAASC_TXFIFO_FULL );
+
+ pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
+ /* check for errors */
+ if ( pAsc->asc_con & ASCCON_OE )
+ {
+ SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
+ return;
+ }
+}
+
+void serial_puts (const char *s)
+{
+ while (*s)
+ {
+ serial_putc (*s++);
+ }
+}
+
+int serial_getc (void)
+{
+ ulong symbol_mask;
+ char c;
+
+ while (!serial_tstc());
+
+ symbol_mask =
+ ((ASC_OPTIONS & ASCOPT_CSIZE) == ASCOPT_CS7) ? (0x7f) : (0xff);
+
+ c = (char)(pAsc->asc_rbuf & symbol_mask);
+
+ return c;
+}
+
+int serial_tstc (void)
+{
+ int res = 1;
+
+ if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
+ {
+ res = 0;
+ }
+ else if ( pAsc->asc_con & ASCCON_FE )
+ {
+ SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);
+ res = 0;
+ }
+ else if ( pAsc->asc_con & ASCCON_PE )
+ {
+ SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRPE);
+ res = 0;
+ }
+ else if ( pAsc->asc_con & ASCCON_OE )
+ {
+ SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
+ res = 0;
+ }
+
+ return res;
+}
diff --git a/cpu/mips/serial.h b/cpu/mips/serial.h
new file mode 100644
index 0000000..ee63360
--- /dev/null
+++ b/cpu/mips/serial.h
@@ -0,0 +1,178 @@
+/* incaAscSio.h - (INCA) ASC UART tty driver header */
+
+#ifndef __INCincaAscSioh
+#define __INCincaAscSioh
+
+#include <asm/inca-ip.h>
+
+/* channel operating modes */
+#define ASCOPT_CSIZE 0x00000003
+#define ASCOPT_CS7 0x00000001
+#define ASCOPT_CS8 0x00000002
+#define ASCOPT_PARENB 0x00000004
+#define ASCOPT_STOPB 0x00000008
+#define ASCOPT_PARODD 0x00000010
+#define ASCOPT_CREAD 0x00000020
+
+#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8)
+
+/* ASC input select (0 or 1) */
+#define CONSOLE_TTY 0
+
+/* use fractional divider for baudrate settings */
+#define INCAASC_USE_FDV
+
+#ifdef INCAASC_USE_FDV
+ #define INCAASC_FDV_LOW_BAUDRATE 71
+ #define INCAASC_FDV_HIGH_BAUDRATE 453
+#endif /*INCAASC_USE_FDV*/
+
+
+#define INCAASC_TXFIFO_FL 1
+#define INCAASC_RXFIFO_FL 1
+#define INCAASC_TXFIFO_FULL 16
+
+/* interrupt lines masks for the ASC device interrupts*/
+/* change these macroses if it's necessary */
+#define INCAASC_IRQ_LINE_ALL 0x000F0000 /* all IRQs */
+
+#define INCAASC_IRQ_LINE_TIR 0x00010000 /* TIR - Tx */
+#define INCAASC_IRQ_LINE_RIR 0x00020000 /* RIR - Rx */
+#define INCAASC_IRQ_LINE_EIR 0x00040000 /* EIR - Err */
+#define INCAASC_IRQ_LINE_TBIR 0x00080000 /* TBIR - Tx Buf*/
+
+/* interrupt controller access macros */
+#define ASC_INTERRUPTS_ENABLE(X) \
+ *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) |= X;
+#define ASC_INTERRUPTS_DISABLE(X) \
+ *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) &= ~X;
+#define ASC_INTERRUPTS_CLEAR(X) \
+ *((volatile unsigned int*) INCA_IP_ICU_IM2_ISR) = X;
+
+/* CLC register's bits and bitfields */
+#define ASCCLC_DISR 0x00000001
+#define ASCCLC_DISS 0x00000002
+#define ASCCLC_RMCMASK 0x0000FF00
+#define ASCCLC_RMCOFFSET 8
+
+/* CON register's bits and bitfields */
+#define ASCCON_MODEMASK 0x0007
+ #define ASCCON_M_8SYNC 0x0
+ #define ASCCON_M_8ASYNC 0x1
+ #define ASCCON_M_8IRDAASYNC 0x2
+ #define ASCCON_M_7ASYNCPAR 0x3
+ #define ASCCON_M_9ASYNC 0x4
+ #define ASCCON_M_8WAKEUPASYNC 0x5
+ #define ASCCON_M_8ASYNCPAR 0x7
+#define ASCCON_STP 0x0008
+#define ASCCON_REN 0x0010
+#define ASCCON_PEN 0x0020
+#define ASCCON_FEN 0x0040
+#define ASCCON_OEN 0x0080
+#define ASCCON_PE 0x0100
+#define ASCCON_FE 0x0200
+#define ASCCON_OE 0x0400
+#define ASCCON_FDE 0x0800
+#define ASCCON_ODD 0x1000
+#define ASCCON_BRS 0x2000
+#define ASCCON_LB 0x4000
+#define ASCCON_R 0x8000
+
+/* WHBCON register's bits and bitfields */
+#define ASCWHBCON_CLRREN 0x0010
+#define ASCWHBCON_SETREN 0x0020
+#define ASCWHBCON_CLRPE 0x0100
+#define ASCWHBCON_CLRFE 0x0200
+#define ASCWHBCON_CLROE 0x0400
+#define ASCWHBCON_SETPE 0x0800
+#define ASCWHBCON_SETFE 0x1000
+#define ASCWHBCON_SETOE 0x2000
+
+/* ABCON register's bits and bitfields */
+#define ASCABCON_ABEN 0x0001
+#define ASCABCON_AUREN 0x0002
+#define ASCABCON_ABSTEN 0x0004
+#define ASCABCON_ABDETEN 0x0008
+#define ASCABCON_FCDETEN 0x0010
+#define ASCABCON_EMMASK 0x0300
+ #define ASCABCON_EMOFF 8
+ #define ASCABCON_EM_DISAB 0x0
+ #define ASCABCON_EM_DURAB 0x1
+ #define ASCABCON_EM_ALWAYS 0x2
+#define ASCABCON_TXINV 0x0400
+#define ASCABCON_RXINV 0x0800
+
+/* FDV register mask, offset and bitfields*/
+#define ASCFDV_VALUE_MASK 0x000001FF
+
+/* WHBABCON register's bits and bitfields */
+#define ASCWHBABCON_SETABEN 0x0001
+#define ASCWHBABCON_CLRABEN 0x0002
+
+/* ABSTAT register's bits and bitfields */
+#define ASCABSTAT_FCSDET 0x0001
+#define ASCABSTAT_FCCDET 0x0002
+#define ASCABSTAT_SCSDET 0x0004
+#define ASCABSTAT_SCCDET 0x0008
+#define ASCABSTAT_DETWAIT 0x0010
+
+/* WHBABSTAT register's bits and bitfields */
+#define ASCWHBABSTAT_CLRFCSDET 0x0001
+#define ASCWHBABSTAT_SETFCSDET 0x0002
+#define ASCWHBABSTAT_CLRFCCDET 0x0004
+#define ASCWHBABSTAT_SETFCCDET 0x0008
+#define ASCWHBABSTAT_CLRSCSDET 0x0010
+#define ASCWHBABSTAT_SETSCSDET 0x0020
+#define ASCWHBABSTAT_SETSCCDET 0x0040
+#define ASCWHBABSTAT_CLRSCCDET 0x0080
+#define ASCWHBABSTAT_CLRDETWAIT 0x0100
+#define ASCWHBABSTAT_SETDETWAIT 0x0200
+
+/* TXFCON register's bits and bitfields */
+#define ASCTXFCON_TXFEN 0x0001
+#define ASCTXFCON_TXFFLU 0x0002
+#define ASCTXFCON_TXTMEN 0x0004
+#define ASCTXFCON_TXFITLMASK 0x3F00
+#define ASCTXFCON_TXFITLOFF 8
+
+/* RXFCON register's bits and bitfields */
+#define ASCRXFCON_RXFEN 0x0001
+#define ASCRXFCON_RXFFLU 0x0002
+#define ASCRXFCON_RXTMEN 0x0004
+#define ASCRXFCON_RXFITLMASK 0x3F00
+#define ASCRXFCON_RXFITLOFF 8
+
+/* FSTAT register's bits and bitfields */
+#define ASCFSTAT_RXFFLMASK 0x003F
+#define ASCFSTAT_TXFFLMASK 0x3F00
+#define ASCFSTAT_TXFFLOFF 8
+
+#define INCAASC_PMU_ENABLE(BIT) *((volatile ulong*)0xBF102000) |= (0x1 << BIT);
+
+typedef struct /* incaAsc_t */
+{
+ volatile unsigned long asc_clc; /*0x0000*/
+ volatile unsigned long asc_pisel; /*0x0004*/
+ volatile unsigned long asc_rsvd1[2]; /* for mapping */ /*0x0008*/
+ volatile unsigned long asc_con; /*0x0010*/
+ volatile unsigned long asc_bg; /*0x0014*/
+ volatile unsigned long asc_fdv; /*0x0018*/
+ volatile unsigned long asc_pmw; /* not used */ /*0x001C*/
+ volatile unsigned long asc_tbuf; /*0x0020*/
+ volatile unsigned long asc_rbuf; /*0x0024*/
+ volatile unsigned long asc_rsvd2[2]; /* for mapping */ /*0x0028*/
+ volatile unsigned long asc_abcon; /*0x0030*/
+ volatile unsigned long asc_abstat; /* not used */ /*0x0034*/
+ volatile unsigned long asc_rsvd3[2]; /* for mapping */ /*0x0038*/
+ volatile unsigned long asc_rxfcon; /*0x0040*/
+ volatile unsigned long asc_txfcon; /*0x0044*/
+ volatile unsigned long asc_fstat; /*0x0048*/
+ volatile unsigned long asc_rsvd4; /* for mapping */ /*0x004C*/
+ volatile unsigned long asc_whbcon; /*0x0050*/
+ volatile unsigned long asc_whbabcon; /*0x0054*/
+ volatile unsigned long asc_whbabstat; /* not used */ /*0x0058*/
+
+} incaAsc_t;
+
+#endif /* __INCincaAscSioh */
+
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
new file mode 100644
index 0000000..bf11655
--- /dev/null
+++ b/cpu/mips/start.S
@@ -0,0 +1,350 @@
+/*
+ * Startup Code for MIPS32 CPU-core
+ *
+ * Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
+
+#define RVECENT(f,n) \
+ b f; nop
+#define XVECENT(f,bev) \
+ b f ; \
+ li k0,bev
+
+ .set noreorder
+
+ .globl _start
+ .text
+_start:
+ RVECENT(reset,0) /* U-boot entry point */
+ RVECENT(reset,1) /* software reboot */
+#ifdef CONFIG_INCA_IP
+ .word 0x000020C4 /* EBU init code, fetched during booting */
+ .word 0x00000000 /* phase of the flash */
+#else
+ RVECENT(romReserved,2)
+#endif
+ RVECENT(romReserved,3)
+ RVECENT(romReserved,4)
+ RVECENT(romReserved,5)
+ RVECENT(romReserved,6)
+ RVECENT(romReserved,7)
+ RVECENT(romReserved,8)
+ RVECENT(romReserved,9)
+ RVECENT(romReserved,10)
+ RVECENT(romReserved,11)
+ RVECENT(romReserved,12)
+ RVECENT(romReserved,13)
+ RVECENT(romReserved,14)
+ RVECENT(romReserved,15)
+ RVECENT(romReserved,16)
+ RVECENT(romReserved,17)
+ RVECENT(romReserved,18)
+ RVECENT(romReserved,19)
+ RVECENT(romReserved,20)
+ RVECENT(romReserved,21)
+ RVECENT(romReserved,22)
+ RVECENT(romReserved,23)
+ RVECENT(romReserved,24)
+ RVECENT(romReserved,25)
+ RVECENT(romReserved,26)
+ RVECENT(romReserved,27)
+ RVECENT(romReserved,28)
+ RVECENT(romReserved,29)
+ RVECENT(romReserved,30)
+ RVECENT(romReserved,31)
+ RVECENT(romReserved,32)
+ RVECENT(romReserved,33)
+ RVECENT(romReserved,34)
+ RVECENT(romReserved,35)
+ RVECENT(romReserved,36)
+ RVECENT(romReserved,37)
+ RVECENT(romReserved,38)
+ RVECENT(romReserved,39)
+ RVECENT(romReserved,40)
+ RVECENT(romReserved,41)
+ RVECENT(romReserved,42)
+ RVECENT(romReserved,43)
+ RVECENT(romReserved,44)
+ RVECENT(romReserved,45)
+ RVECENT(romReserved,46)
+ RVECENT(romReserved,47)
+ RVECENT(romReserved,48)
+ RVECENT(romReserved,49)
+ RVECENT(romReserved,50)
+ RVECENT(romReserved,51)
+ RVECENT(romReserved,52)
+ RVECENT(romReserved,53)
+ RVECENT(romReserved,54)
+ RVECENT(romReserved,55)
+ RVECENT(romReserved,56)
+ RVECENT(romReserved,57)
+ RVECENT(romReserved,58)
+ RVECENT(romReserved,59)
+ RVECENT(romReserved,60)
+ RVECENT(romReserved,61)
+ RVECENT(romReserved,62)
+ RVECENT(romReserved,63)
+ XVECENT(romExcHandle,0x200) /* bfc00200: R4000 tlbmiss vector */
+ RVECENT(romReserved,65)
+ RVECENT(romReserved,66)
+ RVECENT(romReserved,67)
+ RVECENT(romReserved,68)
+ RVECENT(romReserved,69)
+ RVECENT(romReserved,70)
+ RVECENT(romReserved,71)
+ RVECENT(romReserved,72)
+ RVECENT(romReserved,73)
+ RVECENT(romReserved,74)
+ RVECENT(romReserved,75)
+ RVECENT(romReserved,76)
+ RVECENT(romReserved,77)
+ RVECENT(romReserved,78)
+ RVECENT(romReserved,79)
+ XVECENT(romExcHandle,0x280) /* bfc00280: R4000 xtlbmiss vector */
+ RVECENT(romReserved,81)
+ RVECENT(romReserved,82)
+ RVECENT(romReserved,83)
+ RVECENT(romReserved,84)
+ RVECENT(romReserved,85)
+ RVECENT(romReserved,86)
+ RVECENT(romReserved,87)
+ RVECENT(romReserved,88)
+ RVECENT(romReserved,89)
+ RVECENT(romReserved,90)
+ RVECENT(romReserved,91)
+ RVECENT(romReserved,92)
+ RVECENT(romReserved,93)
+ RVECENT(romReserved,94)
+ RVECENT(romReserved,95)
+ XVECENT(romExcHandle,0x300) /* bfc00300: R4000 cache vector */
+ RVECENT(romReserved,97)
+ RVECENT(romReserved,98)
+ RVECENT(romReserved,99)
+ RVECENT(romReserved,100)
+ RVECENT(romReserved,101)
+ RVECENT(romReserved,102)
+ RVECENT(romReserved,103)
+ RVECENT(romReserved,104)
+ RVECENT(romReserved,105)
+ RVECENT(romReserved,106)
+ RVECENT(romReserved,107)
+ RVECENT(romReserved,108)
+ RVECENT(romReserved,109)
+ RVECENT(romReserved,110)
+ RVECENT(romReserved,111)
+ XVECENT(romExcHandle,0x380) /* bfc00380: R4000 general vector */
+ RVECENT(romReserved,113)
+ RVECENT(romReserved,114)
+ RVECENT(romReserved,115)
+ RVECENT(romReserved,116)
+ RVECENT(romReserved,116)
+ RVECENT(romReserved,118)
+ RVECENT(romReserved,119)
+ RVECENT(romReserved,120)
+ RVECENT(romReserved,121)
+ RVECENT(romReserved,122)
+ RVECENT(romReserved,123)
+ RVECENT(romReserved,124)
+ RVECENT(romReserved,125)
+ RVECENT(romReserved,126)
+ RVECENT(romReserved,127)
+
+ /* We hope there are no more reserved vectors!
+ * 128 * 8 == 1024 == 0x400
+ * so this is address R_VEC+0x400 == 0xbfc00400
+ */
+ .align 4
+reset:
+
+ /* Clear watch registers.
+ */
+ mtc0 zero, CP0_WATCHLO
+ mtc0 zero, CP0_WATCHHI
+
+ /* STATUS register */
+ mfc0 k0, CP0_STATUS
+ li k1, ~ST0_IE
+ and k0, k1
+ mtc0 k0, CP0_STATUS
+
+ /* CAUSE register */
+ mtc0 zero, CP0_CAUSE
+
+ /* Init Timer */
+ mtc0 zero, CP0_COUNT
+ mtc0 zero, CP0_COMPARE
+
+ /* CONFIG0 register */
+ li t0, CONF_CM_UNCACHED
+ mtc0 t0, CP0_CONFIG
+
+#ifdef CONFIG_INCA_IP
+ /* Disable INCA-IP Watchdog.
+ */
+ bal disable_incaip_wdt
+ nop
+#endif
+
+ /* Initialize any external memory.
+ */
+ bal memsetup
+ nop
+
+ /* Initialize caches...
+ */
+ bal mips_cache_reset
+ nop
+
+ /* ... and enable them.
+ */
+ li t0, CONF_CM_CACHABLE_NONCOHERENT
+ mtc0 t0, CP0_CONFIG
+
+
+ /* Set up temporary stack.
+ */
+ li a0, CFG_INIT_SP_OFFSET
+ bal mips_cache_lock
+ nop
+
+ li t0, CFG_SDRAM_BASE + CFG_INIT_SP_OFFSET
+ la sp, 0(t0)
+
+ /* Initialize GOT pointer.
+ */
+ bal 1f
+ nop
+ .word _GLOBAL_OFFSET_TABLE_ - 1f + 4
+1:
+ move gp, ra
+ lw t1, 0(ra)
+ add gp, t1
+ la t9, board_init_f
+ j t9
+ nop
+
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * a0 = addr_sp
+ * a1 = gd
+ * a2 = destination address
+ */
+ .globl relocate_code
+ .ent relocate_code
+relocate_code:
+ move sp, a0 /* Set new stack pointer */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+ */
+ move t6, gp
+ sub gp, CFG_MONITOR_BASE
+ add gp, a2 /* gp now adjusted */
+ sub t6, gp, t6 /* t6 <-- relocation offset */
+
+ li t0, CFG_MONITOR_BASE
+ add t2, t0, CFG_MONITOR_LEN
+ move t1, a2
+
+ /*
+ * t0 = source address
+ * t1 = target address
+ * t2 = source end address
+ */
+1:
+ lw t3, 0(t0)
+ sw t3, 0(t1)
+ addu t0, 4
+ ble t0, t2, 1b
+ addu t1, 4 /* delay slot */
+
+ /* If caches were enabled, we would have to flush them here.
+ */
+
+ /* Jump to where we've relocated ourselves.
+ */
+ addi t0, a2, in_ram - _start
+ j t0
+ nop
+
+ .word uboot_end_data
+ .word uboot_end
+ .word num_got_entries
+
+in_ram:
+ /* Now we want to update GOT.
+ */
+ lw t3, -4(t0) /* t3 <-- num_got_entries */
+ addi t4, gp, 8 /* Skipping first two entries. */
+ li t2, 2
+1:
+ lw t1, 0(t4)
+ beqz t1, 2f
+ add t1, t6
+ sw t1, 0(t4)
+2:
+ addi t2, 1
+ blt t2, t3, 1b
+ addi t4, 4 /* delay slot */
+
+ /* Clear BSS.
+ */
+ lw t1, -12(t0) /* t1 <-- uboot_end_data */
+ lw t2, -8(t0) /* t2 <-- uboot_end */
+ add t1, t6 /* adjust pointers */
+ add t2, t6
+
+ sub t1, 4
+1: addi t1, 4
+ bltl t1, t2, 1b
+ sw zero, 0(t1) /* delay slot */
+
+ move a0, a1
+ la t9, board_init_r
+ j t9
+ move a1, a2 /* delay slot */
+
+ .end relocate_code
+
+
+
+ /* Exception handlers.
+ */
+romReserved:
+ b romReserved
+
+romExcHandle:
+ b romExcHandle
+
diff --git a/include/asm-mips/inca-ip.h b/include/asm-mips/inca-ip.h
new file mode 100644
index 0000000..dbacb33
--- /dev/null
+++ b/include/asm-mips/inca-ip.h
@@ -0,0 +1,2431 @@
+
+/******************************************************************************
+ Copyright (c) 2002, Infineon Technologies. All rights reserved.
+
+ No Warranty
+ Because the program is licensed free of charge, there is no warranty for
+ the program, to the extent permitted by applicable law. Except when
+ otherwise stated in writing the copyright holders and/or other parties
+ provide the program "as is" without warranty of any kind, either
+ expressed or implied, including, but not limited to, the implied
+ warranties of merchantability and fitness for a particular purpose. The
+ entire risk as to the quality and performance of the program is with
+ you. should the program prove defective, you assume the cost of all
+ necessary servicing, repair or correction.
+
+ In no event unless required by applicable law or agreed to in writing
+ will any copyright holder, or any other party who may modify and/or
+ redistribute the program as permitted above, be liable to you for
+ damages, including any general, special, incidental or consequential
+ damages arising out of the use or inability to use the program
+ (including but not limited to loss of data or data being rendered
+ inaccurate or losses sustained by you or third parties or a failure of
+ the program to operate with any other programs), even if such holder or
+ other party has been advised of the possibility of such damages.
+******************************************************************************/
+
+
+/***********************************************************************/
+/* Module : WDT register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_WDT (0xB8000000)
+/***********************************************************************/
+
+
+/***Reset Status Register Power On***/
+#define INCA_IP_WDT_RST_SR ((volatile u32*)(INCA_IP_WDT+ 0x0014))
+
+/***Reset Request Register***/
+#define INCA_IP_WDT_RST_REQ ((volatile u32*)(INCA_IP_WDT+ 0x0010))
+#define INCA_IP_WDT_RST_REQ_SWBOOT (1 << 24)
+#define INCA_IP_WDT_RST_REQ_SWCFG (1 << 16)
+#define INCA_IP_WDT_RST_REQ_RRPHY (1 << 5)
+#define INCA_IP_WDT_RST_REQ_RRHSP (1 << 4)
+#define INCA_IP_WDT_RST_REQ_RRFPI (1 << 3)
+#define INCA_IP_WDT_RST_REQ_RREXT (1 << 2)
+#define INCA_IP_WDT_RST_REQ_RRDSP (1 << 1)
+#define INCA_IP_WDT_RST_REQ_RRCPU (1 << 0)
+
+/***NMI Status Register***/
+#define INCA_IP_WDT_NMISR ((volatile u32*)(INCA_IP_WDT+ 0x002C))
+#define INCA_IP_WDT_NMISR_NMIWDT (1 << 2)
+#define INCA_IP_WDT_NMISR_NMIPLL (1 << 1)
+#define INCA_IP_WDT_NMISR_NMIEXT (1 << 0)
+
+/***Manufacturer Identification Register***/
+#define INCA_IP_WDT_MANID ((volatile u32*)(INCA_IP_WDT+ 0x0070))
+#define INCA_IP_WDT_MANID_MANUF (value) (((( 1 << 11) - 1) & (value)) << 5)
+
+/***Chip Identification Register***/
+#define INCA_IP_WDT_CHIPID ((volatile u32*)(INCA_IP_WDT+ 0x0074))
+#define INCA_IP_WDT_CHIPID_VERSION (value) (((( 1 << 4) - 1) & (value)) << 28)
+#define INCA_IP_WDT_CHIPID_PART_NUMBER (value) (((( 1 << 16) - 1) & (value)) << 12)
+#define INCA_IP_WDT_CHIPID_MANID (value) (((( 1 << 11) - 1) & (value)) << 1)
+
+/***Redesign Tracing Identification Register***/
+#define INCA_IP_WDT_RTID ((volatile u32*)(INCA_IP_WDT+ 0x0078))
+#define INCA_IP_WDT_RTID_LC (1 << 15)
+#define INCA_IP_WDT_RTID_RIX (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Watchdog Timer Control Register 0***/
+#define INCA_IP_WDT_WDT_CON0 ((volatile u32*)(INCA_IP_WDT+ 0x0020))
+
+/***Watchdog Timer Control Register 1***/
+#define INCA_IP_WDT_WDT_CON1 ((volatile u32*)(INCA_IP_WDT+ 0x0024))
+#define INCA_IP_WDT_WDT_CON1_WDTDR (1 << 3)
+#define INCA_IP_WDT_WDT_CON1_WDTIR (1 << 2)
+
+/***Watchdog Timer Status Register***/
+#define INCA_IP_WDT_WDT_SR ((volatile u32*)(INCA_IP_WDT+ 0x0028))
+#define INCA_IP_WDT_WDT_SR_WDTTIM (value) (((( 1 << 16) - 1) & (value)) << 16)
+#define INCA_IP_WDT_WDT_SR_WDTPR (1 << 5)
+#define INCA_IP_WDT_WDT_SR_WDTTO (1 << 4)
+#define INCA_IP_WDT_WDT_SR_WDTDS (1 << 3)
+#define INCA_IP_WDT_WDT_SR_WDTIS (1 << 2)
+#define INCA_IP_WDT_WDT_SR_WDTOE (1 << 1)
+#define INCA_IP_WDT_WDT_SR_WDTAE (1 << 0)
+
+/***********************************************************************/
+/* Module : CGU register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_CGU (0xBF107000)
+/***********************************************************************/
+
+
+/***CGU PLL1 Control Register***/
+#define INCA_IP_CGU_CGU_PLL1CR ((volatile u32*)(INCA_IP_CGU+ 0x0008))
+#define INCA_IP_CGU_CGU_PLL1CR_SWRST (1 << 31)
+#define INCA_IP_CGU_CGU_PLL1CR_EN (1 << 30)
+#define INCA_IP_CGU_CGU_PLL1CR_NDIV (value) (((( 1 << 6) - 1) & (value)) << 16)
+#define INCA_IP_CGU_CGU_PLL1CR_MDIV (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***CGU PLL0 Control Register***/
+#define INCA_IP_CGU_CGU_PLL0CR ((volatile u32*)(INCA_IP_CGU+ 0x0000))
+#define INCA_IP_CGU_CGU_PLL0CR_SWRST (1 << 31)
+#define INCA_IP_CGU_CGU_PLL0CR_EN (1 << 30)
+#define INCA_IP_CGU_CGU_PLL0CR_NDIV (value) (((( 1 << 6) - 1) & (value)) << 16)
+#define INCA_IP_CGU_CGU_PLL0CR_MDIV (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***CGU PLL0 Status Register***/
+#define INCA_IP_CGU_CGU_PLL0SR ((volatile u32*)(INCA_IP_CGU+ 0x0004))
+#define INCA_IP_CGU_CGU_PLL0SR_LOCK (1 << 31)
+#define INCA_IP_CGU_CGU_PLL0SR_RCF (1 << 29)
+#define INCA_IP_CGU_CGU_PLL0SR_PLLBYP (1 << 15)
+
+/***CGU PLL1 Status Register***/
+#define INCA_IP_CGU_CGU_PLL1SR ((volatile u32*)(INCA_IP_CGU+ 0x000C))
+#define INCA_IP_CGU_CGU_PLL1SR_LOCK (1 << 31)
+#define INCA_IP_CGU_CGU_PLL1SR_RCF (1 << 29)
+#define INCA_IP_CGU_CGU_PLL1SR_PLLBYP (1 << 15)
+
+/***CGU Divider Control Register***/
+#define INCA_IP_CGU_CGU_DIVCR ((volatile u32*)(INCA_IP_CGU+ 0x0010))
+
+/***CGU Multiplexer Control Register***/
+#define INCA_IP_CGU_CGU_MUXCR ((volatile u32*)(INCA_IP_CGU+ 0x0014))
+#define INCA_IP_CGU_CGU_MUXCR_SWRST (1 << 31)
+#define INCA_IP_CGU_CGU_MUXCR_MUXII (1 << 1)
+#define INCA_IP_CGU_CGU_MUXCR_MUXI (1 << 0)
+
+/***CGU Fractional Divider Control Register***/
+#define INCA_IP_CGU_CGU_FDCR ((volatile u32*)(INCA_IP_CGU+ 0x0018))
+#define INCA_IP_CGU_CGU_FDCR_FDEN (1 << 31)
+#define INCA_IP_CGU_CGU_FDCR_INTEGER (value) (((( 1 << 12) - 1) & (value)) << 16)
+#define INCA_IP_CGU_CGU_FDCR_FRACTION (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : PMU register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_PMU (0xBF102000)
+/***********************************************************************/
+
+
+/***PM Global Enable Register***/
+#define INCA_IP_PMU_PM_GEN ((volatile u32*)(INCA_IP_PMU+ 0x0000))
+#define INCA_IP_PMU_PM_GEN_EN16 (1 << 16)
+#define INCA_IP_PMU_PM_GEN_EN15 (1 << 15)
+#define INCA_IP_PMU_PM_GEN_EN14 (1 << 14)
+#define INCA_IP_PMU_PM_GEN_EN13 (1 << 13)
+#define INCA_IP_PMU_PM_GEN_EN12 (1 << 12)
+#define INCA_IP_PMU_PM_GEN_EN11 (1 << 11)
+#define INCA_IP_PMU_PM_GEN_EN10 (1 << 10)
+#define INCA_IP_PMU_PM_GEN_EN9 (1 << 9)
+#define INCA_IP_PMU_PM_GEN_EN8 (1 << 8)
+#define INCA_IP_PMU_PM_GEN_EN7 (1 << 7)
+#define INCA_IP_PMU_PM_GEN_EN6 (1 << 6)
+#define INCA_IP_PMU_PM_GEN_EN5 (1 << 5)
+#define INCA_IP_PMU_PM_GEN_EN4 (1 << 4)
+#define INCA_IP_PMU_PM_GEN_EN3 (1 << 3)
+#define INCA_IP_PMU_PM_GEN_EN2 (1 << 2)
+#define INCA_IP_PMU_PM_GEN_EN0 (1 << 0)
+
+/***PM Power Down Enable Register***/
+#define INCA_IP_PMU_PM_PDEN ((volatile u32*)(INCA_IP_PMU+ 0x0008))
+#define INCA_IP_PMU_PM_PDEN_EN16 (1 << 16)
+#define INCA_IP_PMU_PM_PDEN_EN15 (1 << 15)
+#define INCA_IP_PMU_PM_PDEN_EN14 (1 << 14)
+#define INCA_IP_PMU_PM_PDEN_EN13 (1 << 13)
+#define INCA_IP_PMU_PM_PDEN_EN12 (1 << 12)
+#define INCA_IP_PMU_PM_PDEN_EN11 (1 << 11)
+#define INCA_IP_PMU_PM_PDEN_EN10 (1 << 10)
+#define INCA_IP_PMU_PM_PDEN_EN9 (1 << 9)
+#define INCA_IP_PMU_PM_PDEN_EN8 (1 << 8)
+#define INCA_IP_PMU_PM_PDEN_EN7 (1 << 7)
+#define INCA_IP_PMU_PM_PDEN_EN5 (1 << 5)
+#define INCA_IP_PMU_PM_PDEN_EN4 (1 << 4)
+#define INCA_IP_PMU_PM_PDEN_EN3 (1 << 3)
+#define INCA_IP_PMU_PM_PDEN_EN2 (1 << 2)
+#define INCA_IP_PMU_PM_PDEN_EN0 (1 << 0)
+
+/***PM Wake-Up from Power Down Register***/
+#define INCA_IP_PMU_PM_WUP ((volatile u32*)(INCA_IP_PMU+ 0x0010))
+#define INCA_IP_PMU_PM_WUP_WUP16 (1 << 16)
+#define INCA_IP_PMU_PM_WUP_WUP15 (1 << 15)
+#define INCA_IP_PMU_PM_WUP_WUP14 (1 << 14)
+#define INCA_IP_PMU_PM_WUP_WUP13 (1 << 13)
+#define INCA_IP_PMU_PM_WUP_WUP12 (1 << 12)
+#define INCA_IP_PMU_PM_WUP_WUP11 (1 << 11)
+#define INCA_IP_PMU_PM_WUP_WUP10 (1 << 10)
+#define INCA_IP_PMU_PM_WUP_WUP9 (1 << 9)
+#define INCA_IP_PMU_PM_WUP_WUP8 (1 << 8)
+#define INCA_IP_PMU_PM_WUP_WUP7 (1 << 7)
+#define INCA_IP_PMU_PM_WUP_WUP5 (1 << 5)
+#define INCA_IP_PMU_PM_WUP_WUP4 (1 << 4)
+#define INCA_IP_PMU_PM_WUP_WUP3 (1 << 3)
+#define INCA_IP_PMU_PM_WUP_WUP2 (1 << 2)
+#define INCA_IP_PMU_PM_WUP_WUP0 (1 << 0)
+
+/***PM Control Register***/
+#define INCA_IP_PMU_PM_CR ((volatile u32*)(INCA_IP_PMU+ 0x0014))
+#define INCA_IP_PMU_PM_CR_AWEN (1 << 31)
+#define INCA_IP_PMU_PM_CR_SWRST (1 << 30)
+#define INCA_IP_PMU_PM_CR_SWCR (1 << 2)
+#define INCA_IP_PMU_PM_CR_CRD (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : BCU register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_BCU (0xB8000100)
+/***********************************************************************/
+
+
+/***BCU Control Register (0010H)***/
+#define INCA_IP_BCU_BCU_CON ((volatile u32*)(INCA_IP_BCU+ 0x0010))
+#define INCA_IP_BCU_BCU_CON_SPC (value) (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_BCU_BCU_CON_SPE (1 << 19)
+#define INCA_IP_BCU_BCU_CON_PSE (1 << 18)
+#define INCA_IP_BCU_BCU_CON_DBG (1 << 16)
+#define INCA_IP_BCU_BCU_CON_TOUT (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***BCU Error Control Capture Register (0020H)***/
+#define INCA_IP_BCU_BCU_ECON ((volatile u32*)(INCA_IP_BCU+ 0x0020))
+#define INCA_IP_BCU_BCU_ECON_TAG (value) (((( 1 << 4) - 1) & (value)) << 24)
+#define INCA_IP_BCU_BCU_ECON_RDN (1 << 23)
+#define INCA_IP_BCU_BCU_ECON_WRN (1 << 22)
+#define INCA_IP_BCU_BCU_ECON_SVM (1 << 21)
+#define INCA_IP_BCU_BCU_ECON_ACK (value) (((( 1 << 2) - 1) & (value)) << 19)
+#define INCA_IP_BCU_BCU_ECON_ABT (1 << 18)
+#define INCA_IP_BCU_BCU_ECON_RDY (1 << 17)
+#define INCA_IP_BCU_BCU_ECON_TOUT (1 << 16)
+#define INCA_IP_BCU_BCU_ECON_ERRCNT (value) (((( 1 << 16) - 1) & (value)) << 0)
+#define INCA_IP_BCU_BCU_ECON_OPC (value) (((( 1 << 4) - 1) & (value)) << 28)
+
+/***BCU Error Address Capture Register (0024 H)***/
+#define INCA_IP_BCU_BCU_EADD ((volatile u32*)(INCA_IP_BCU+ 0x0024))
+#define INCA_IP_BCU_BCU_EADD_FPIADR
+
+/***BCU Error Data Capture Register (0028H)***/
+#define INCA_IP_BCU_BCU_EDAT ((volatile u32*)(INCA_IP_BCU+ 0x0028))
+#define INCA_IP_BCU_BCU_EDAT_FPIDAT
+
+/***********************************************************************/
+/* Module : MBC register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_MBC (0xBF103000)
+/***********************************************************************/
+
+
+/***Mailbox CPU Configuration Register***/
+#define INCA_IP_MBC_MBC_CFG ((volatile u32*)(INCA_IP_MBC+ 0x0080))
+#define INCA_IP_MBC_MBC_CFG_SWAP (value) (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_MBC_MBC_CFG_RES (1 << 5)
+#define INCA_IP_MBC_MBC_CFG_FWID (value) (((( 1 << 4) - 1) & (value)) << 1)
+#define INCA_IP_MBC_MBC_CFG_SIZE (1 << 0)
+
+/***Mailbox CPU Interrupt Status Register***/
+#define INCA_IP_MBC_MBC_ISR ((volatile u32*)(INCA_IP_MBC+ 0x0084))
+#define INCA_IP_MBC_MBC_ISR_B3DA (1 << 31)
+#define INCA_IP_MBC_MBC_ISR_B2DA (1 << 30)
+#define INCA_IP_MBC_MBC_ISR_B1E (1 << 29)
+#define INCA_IP_MBC_MBC_ISR_B0E (1 << 28)
+#define INCA_IP_MBC_MBC_ISR_WDT (1 << 27)
+#define INCA_IP_MBC_MBC_ISR_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Mask Register***/
+#define INCA_IP_MBC_MBC_MSK ((volatile u32*)(INCA_IP_MBC+ 0x0088))
+#define INCA_IP_MBC_MBC_MSK_B3DA (1 << 31)
+#define INCA_IP_MBC_MBC_MSK_B2DA (1 << 30)
+#define INCA_IP_MBC_MBC_MSK_B1E (1 << 29)
+#define INCA_IP_MBC_MBC_MSK_B0E (1 << 28)
+#define INCA_IP_MBC_MBC_MSK_WDT (1 << 27)
+#define INCA_IP_MBC_MBC_MSK_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Mask 01 Register***/
+#define INCA_IP_MBC_MBC_MSK01 ((volatile u32*)(INCA_IP_MBC+ 0x008C))
+#define INCA_IP_MBC_MBC_MSK01_B3DA (1 << 31)
+#define INCA_IP_MBC_MBC_MSK01_B2DA (1 << 30)
+#define INCA_IP_MBC_MBC_MSK01_B1E (1 << 29)
+#define INCA_IP_MBC_MBC_MSK01_B0E (1 << 28)
+#define INCA_IP_MBC_MBC_MSK01_WDT (1 << 27)
+#define INCA_IP_MBC_MBC_MSK01_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Mask 10 Register***/
+#define INCA_IP_MBC_MBC_MSK10 ((volatile u32*)(INCA_IP_MBC+ 0x0090))
+#define INCA_IP_MBC_MBC_MSK10_B3DA (1 << 31)
+#define INCA_IP_MBC_MBC_MSK10_B2DA (1 << 30)
+#define INCA_IP_MBC_MBC_MSK10_B1E (1 << 29)
+#define INCA_IP_MBC_MBC_MSK10_B0E (1 << 28)
+#define INCA_IP_MBC_MBC_MSK10_WDT (1 << 27)
+#define INCA_IP_MBC_MBC_MSK10_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Short Command Register***/
+#define INCA_IP_MBC_MBC_CMD ((volatile u32*)(INCA_IP_MBC+ 0x0094))
+#define INCA_IP_MBC_MBC_CMD_CS270 (value) (((( 1 << 28) - 1) & (value)) << 0)
+
+/***Mailbox CPU Input Data of Buffer 0***/
+#define INCA_IP_MBC_MBC_ID0 ((volatile u32*)(INCA_IP_MBC+ 0x0000))
+#define INCA_IP_MBC_MBC_ID0_INDATA
+
+/***Mailbox CPU Input Data of Buffer 1***/
+#define INCA_IP_MBC_MBC_ID1 ((volatile u32*)(INCA_IP_MBC+ 0x0020))
+#define INCA_IP_MBC_MBC_ID1_INDATA
+
+/***Mailbox CPU Output Data of Buffer 2***/
+#define INCA_IP_MBC_MBC_OD2 ((volatile u32*)(INCA_IP_MBC+ 0x0040))
+#define INCA_IP_MBC_MBC_OD2_OUTDATA
+
+/***Mailbox CPU Output Data of Buffer 3***/
+#define INCA_IP_MBC_MBC_OD3 ((volatile u32*)(INCA_IP_MBC+ 0x0060))
+#define INCA_IP_MBC_MBC_OD3_OUTDATA
+
+/***Mailbox CPU Control Register of Buffer 0***/
+#define INCA_IP_MBC_MBC_CR0 ((volatile u32*)(INCA_IP_MBC+ 0x0004))
+#define INCA_IP_MBC_MBC_CR0_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Control Register of Buffer 1***/
+#define INCA_IP_MBC_MBC_CR1 ((volatile u32*)(INCA_IP_MBC+ 0x0024))
+#define INCA_IP_MBC_MBC_CR1_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Control Register of Buffer 2***/
+#define INCA_IP_MBC_MBC_CR2 ((volatile u32*)(INCA_IP_MBC+ 0x0044))
+#define INCA_IP_MBC_MBC_CR2_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Control Register of Buffer 3***/
+#define INCA_IP_MBC_MBC_CR3 ((volatile u32*)(INCA_IP_MBC+ 0x0064))
+#define INCA_IP_MBC_MBC_CR3_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Free Space of Buffer 0***/
+#define INCA_IP_MBC_MBC_FS0 ((volatile u32*)(INCA_IP_MBC+ 0x0008))
+#define INCA_IP_MBC_MBC_FS0_FS
+
+/***Mailbox CPU Free Space of Buffer 1***/
+#define INCA_IP_MBC_MBC_FS1 ((volatile u32*)(INCA_IP_MBC+ 0x0028))
+#define INCA_IP_MBC_MBC_FS1_FS
+
+/***Mailbox CPU Free Space of Buffer 2***/
+#define INCA_IP_MBC_MBC_FS2 ((volatile u32*)(INCA_IP_MBC+ 0x0048))
+#define INCA_IP_MBC_MBC_FS2_FS
+
+/***Mailbox CPU Free Space of Buffer 3***/
+#define INCA_IP_MBC_MBC_FS3 ((volatile u32*)(INCA_IP_MBC+ 0x0068))
+#define INCA_IP_MBC_MBC_FS3_FS
+
+/***Mailbox CPU Data Available in Buffer 0***/
+#define INCA_IP_MBC_MBC_DA0 ((volatile u32*)(INCA_IP_MBC+ 0x000C))
+#define INCA_IP_MBC_MBC_DA0_DA
+
+/***Mailbox CPU Data Available in Buffer 1***/
+#define INCA_IP_MBC_MBC_DA1 ((volatile u32*)(INCA_IP_MBC+ 0x002C))
+#define INCA_IP_MBC_MBC_DA1_DA
+
+/***Mailbox CPU Data Available in Buffer 2***/
+#define INCA_IP_MBC_MBC_DA2 ((volatile u32*)(INCA_IP_MBC+ 0x004C))
+#define INCA_IP_MBC_MBC_DA2_DA
+
+/***Mailbox CPU Data Available in Buffer 3***/
+#define INCA_IP_MBC_MBC_DA3 ((volatile u32*)(INCA_IP_MBC+ 0x006C))
+#define INCA_IP_MBC_MBC_DA3_DA
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 0***/
+#define INCA_IP_MBC_MBC_IABS0 ((volatile u32*)(INCA_IP_MBC+ 0x0010))
+#define INCA_IP_MBC_MBC_IABS0_IABS
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 1***/
+#define INCA_IP_MBC_MBC_IABS1 ((volatile u32*)(INCA_IP_MBC+ 0x0030))
+#define INCA_IP_MBC_MBC_IABS1_IABS
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 2***/
+#define INCA_IP_MBC_MBC_IABS2 ((volatile u32*)(INCA_IP_MBC+ 0x0050))
+#define INCA_IP_MBC_MBC_IABS2_IABS
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 3***/
+#define INCA_IP_MBC_MBC_IABS3 ((volatile u32*)(INCA_IP_MBC+ 0x0070))
+#define INCA_IP_MBC_MBC_IABS3_IABS
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 0***/
+#define INCA_IP_MBC_MBC_ITMP0 ((volatile u32*)(INCA_IP_MBC+ 0x0014))
+#define INCA_IP_MBC_MBC_ITMP0_ITMP
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 1***/
+#define INCA_IP_MBC_MBC_ITMP1 ((volatile u32*)(INCA_IP_MBC+ 0x0034))
+#define INCA_IP_MBC_MBC_ITMP1_ITMP
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 2***/
+#define INCA_IP_MBC_MBC_ITMP2 ((volatile u32*)(INCA_IP_MBC+ 0x0054))
+#define INCA_IP_MBC_MBC_ITMP2_ITMP
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 3***/
+#define INCA_IP_MBC_MBC_ITMP3 ((volatile u32*)(INCA_IP_MBC+ 0x0074))
+#define INCA_IP_MBC_MBC_ITMP3_ITMP
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 0***/
+#define INCA_IP_MBC_MBC_OABS0 ((volatile u32*)(INCA_IP_MBC+ 0x0018))
+#define INCA_IP_MBC_MBC_OABS0_OABS
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 1***/
+#define INCA_IP_MBC_MBC_OABS1 ((volatile u32*)(INCA_IP_MBC+ 0x0038))
+#define INCA_IP_MBC_MBC_OABS1_OABS
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 2***/
+#define INCA_IP_MBC_MBC_OABS2 ((volatile u32*)(INCA_IP_MBC+ 0x0058))
+#define INCA_IP_MBC_MBC_OABS2_OABS
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 3***/
+#define INCA_IP_MBC_MBC_OABS3 ((volatile u32*)(INCA_IP_MBC+ 0x0078))
+#define INCA_IP_MBC_MBC_OABS3_OABS
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 0***/
+#define INCA_IP_MBC_MBC_OTMP0 ((volatile u32*)(INCA_IP_MBC+ 0x001C))
+#define INCA_IP_MBC_MBC_OTMP0_OTMP
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 1***/
+#define INCA_IP_MBC_MBC_OTMP1 ((volatile u32*)(INCA_IP_MBC+ 0x003C))
+#define INCA_IP_MBC_MBC_OTMP1_OTMP
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 2***/
+#define INCA_IP_MBC_MBC_OTMP2 ((volatile u32*)(INCA_IP_MBC+ 0x005C))
+#define INCA_IP_MBC_MBC_OTMP2_OTMP
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 3***/
+#define INCA_IP_MBC_MBC_OTMP3 ((volatile u32*)(INCA_IP_MBC+ 0x007C))
+#define INCA_IP_MBC_MBC_OTMP3_OTMP
+
+/***DSP Control Register***/
+#define INCA_IP_MBC_DCTRL ((volatile u32*)(INCA_IP_MBC+ 0x00A0))
+#define INCA_IP_MBC_DCTRL_BA (1 << 0)
+#define INCA_IP_MBC_DCTRL_BMOD (value) (((( 1 << 3) - 1) & (value)) << 1)
+#define INCA_IP_MBC_DCTRL_IDL (1 << 4)
+#define INCA_IP_MBC_DCTRL_RES (1 << 15)
+
+/***DSP Status Register***/
+#define INCA_IP_MBC_DSTA ((volatile u32*)(INCA_IP_MBC+ 0x00A4))
+#define INCA_IP_MBC_DSTA_IDLE (1 << 0)
+#define INCA_IP_MBC_DSTA_PD (1 << 1)
+
+/***DSP Test 1 Register***/
+#define INCA_IP_MBC_DTST1 ((volatile u32*)(INCA_IP_MBC+ 0x00A8))
+#define INCA_IP_MBC_DTST1_ABORT (1 << 0)
+#define INCA_IP_MBC_DTST1_HWF32 (1 << 1)
+#define INCA_IP_MBC_DTST1_HWF4M (1 << 2)
+#define INCA_IP_MBC_DTST1_HWFOP (1 << 3)
+
+/***********************************************************************/
+/* Module : Switch register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_Switch (0xBF104000)
+/***********************************************************************/
+
+
+/***Unknown Destination Register***/
+#define INCA_IP_Switch_UN_DEST ((volatile u32*)(INCA_IP_Switch+ 0x0000))
+#define INCA_IP_Switch_UN_DEST_CB (1 << 8)
+#define INCA_IP_Switch_UN_DEST_LB (1 << 7)
+#define INCA_IP_Switch_UN_DEST_PB (1 << 6)
+#define INCA_IP_Switch_UN_DEST_CM (1 << 5)
+#define INCA_IP_Switch_UN_DEST_LM (1 << 4)
+#define INCA_IP_Switch_UN_DEST_PM (1 << 3)
+#define INCA_IP_Switch_UN_DEST_CU (1 << 2)
+#define INCA_IP_Switch_UN_DEST_LU (1 << 1)
+#define INCA_IP_Switch_UN_DEST_PU (1 << 0)
+
+/***VLAN Control Register***/
+#define INCA_IP_Switch_VLAN_CTRL ((volatile u32*)(INCA_IP_Switch+ 0x0004))
+#define INCA_IP_Switch_VLAN_CTRL_SC (1 << 6)
+#define INCA_IP_Switch_VLAN_CTRL_SL (1 << 5)
+#define INCA_IP_Switch_VLAN_CTRL_SP (1 << 4)
+#define INCA_IP_Switch_VLAN_CTRL_TC (1 << 3)
+#define INCA_IP_Switch_VLAN_CTRL_TL (1 << 2)
+#define INCA_IP_Switch_VLAN_CTRL_TP (1 << 1)
+#define INCA_IP_Switch_VLAN_CTRL_VA (1 << 0)
+
+/***PC VLAN Configuration Register***/
+#define INCA_IP_Switch_PC_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0008))
+#define INCA_IP_Switch_PC_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_Switch_PC_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0)
+
+/***LAN VLAN Configuration Register***/
+#define INCA_IP_Switch_LAN_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x000C))
+#define INCA_IP_Switch_LAN_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_Switch_LAN_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0)
+
+/***CPU VLAN Configuration Register***/
+#define INCA_IP_Switch_CPU_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0010))
+#define INCA_IP_Switch_CPU_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_Switch_CPU_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0)
+
+/***Priority CoS Mapping Register***/
+#define INCA_IP_Switch_PRI_CoS ((volatile u32*)(INCA_IP_Switch+ 0x0014))
+#define INCA_IP_Switch_PRI_CoS_P7 (1 << 7)
+#define INCA_IP_Switch_PRI_CoS_P6 (1 << 6)
+#define INCA_IP_Switch_PRI_CoS_P5 (1 << 5)
+#define INCA_IP_Switch_PRI_CoS_P4 (1 << 4)
+#define INCA_IP_Switch_PRI_CoS_P3 (1 << 3)
+#define INCA_IP_Switch_PRI_CoS_P2 (1 << 2)
+#define INCA_IP_Switch_PRI_CoS_P1 (1 << 1)
+#define INCA_IP_Switch_PRI_CoS_P0 (1 << 0)
+
+/***Spanning Tree Port Status Register***/
+#define INCA_IP_Switch_ST_PT ((volatile u32*)(INCA_IP_Switch+ 0x0018))
+#define INCA_IP_Switch_ST_PT_CPS (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_Switch_ST_PT_LPS (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_Switch_ST_PT_PPS (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***ARL Control Register***/
+#define INCA_IP_Switch_ARL_CTL ((volatile u32*)(INCA_IP_Switch+ 0x001C))
+#define INCA_IP_Switch_ARL_CTL_CHCC (1 << 15)
+#define INCA_IP_Switch_ARL_CTL_CHCL (1 << 14)
+#define INCA_IP_Switch_ARL_CTL_CHCP (1 << 13)
+#define INCA_IP_Switch_ARL_CTL_CC (1 << 12)
+#define INCA_IP_Switch_ARL_CTL_CL (1 << 11)
+#define INCA_IP_Switch_ARL_CTL_CP (1 << 10)
+#define INCA_IP_Switch_ARL_CTL_CG (1 << 9)
+#define INCA_IP_Switch_ARL_CTL_PS (1 << 8)
+#define INCA_IP_Switch_ARL_CTL_MRO (1 << 7)
+#define INCA_IP_Switch_ARL_CTL_SRC (1 << 6)
+#define INCA_IP_Switch_ARL_CTL_ATS (1 << 5)
+#define INCA_IP_Switch_ARL_CTL_AGE_TICK_SEL (value) (((( 1 << 3) - 1) & (value)) << 2)
+#define INCA_IP_Switch_ARL_CTL_MAF (1 << 1)
+#define INCA_IP_Switch_ARL_CTL_ENL (1 << 0)
+#define INCA_IP_Switch_ARL_CTL_Res (value) (((( 1 << 19) - 1) & (value)) << 13)
+
+/***CPU Access Control Register***/
+#define INCA_IP_Switch_CPU_ACTL ((volatile u32*)(INCA_IP_Switch+ 0x0020))
+#define INCA_IP_Switch_CPU_ACTL_RA (1 << 31)
+#define INCA_IP_Switch_CPU_ACTL_RW (1 << 30)
+#define INCA_IP_Switch_CPU_ACTL_Res (value) (((( 1 << 21) - 1) & (value)) << 9)
+#define INCA_IP_Switch_CPU_ACTL_AVA (1 << 8)
+#define INCA_IP_Switch_CPU_ACTL_IDX (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***CPU Access Data Register 1***/
+#define INCA_IP_Switch_DATA1 ((volatile u32*)(INCA_IP_Switch+ 0x0024))
+#define INCA_IP_Switch_DATA1_Data (value) (((( 1 << 24) - 1) & (value)) << 0)
+
+/***CPU Access Data Register 2***/
+#define INCA_IP_Switch_DATA2 ((volatile u32*)(INCA_IP_Switch+ 0x0028))
+#define INCA_IP_Switch_DATA2_Data
+
+/***CPU Port Control Register***/
+#define INCA_IP_Switch_CPU_PCTL ((volatile u32*)(INCA_IP_Switch+ 0x002C))
+#define INCA_IP_Switch_CPU_PCTL_DA_PORTS (value) (((( 1 << 3) - 1) & (value)) << 11)
+#define INCA_IP_Switch_CPU_PCTL_DAC (1 << 10)
+#define INCA_IP_Switch_CPU_PCTL_MA_STATE (value) (((( 1 << 3) - 1) & (value)) << 7)
+#define INCA_IP_Switch_CPU_PCTL_MAM (1 << 6)
+#define INCA_IP_Switch_CPU_PCTL_MA_Ports (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_Switch_CPU_PCTL_MAC (1 << 2)
+#define INCA_IP_Switch_CPU_PCTL_EML (1 << 1)
+#define INCA_IP_Switch_CPU_PCTL_EDL (1 << 0)
+#define INCA_IP_Switch_CPU_PCTL_Res (value) (((( 1 << 18) - 1) & (value)) << 14)
+
+/***DSCP CoS Mapping Register 1***/
+#define INCA_IP_Switch_DSCP_COS1 ((volatile u32*)(INCA_IP_Switch+ 0x0030))
+#define INCA_IP_Switch_DSCP_COS1_DSCP
+
+/***DSCP CoS Mapping Register 1***/
+#define INCA_IP_Switch_DSCP_COS2 ((volatile u32*)(INCA_IP_Switch+ 0x0034))
+#define INCA_IP_Switch_DSCP_COS2_DSCP
+
+/***PC WFQ Control Register***/
+#define INCA_IP_Switch_PC_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0080))
+#define INCA_IP_Switch_PC_WFQ_CTL_P1 (1 << 9)
+#define INCA_IP_Switch_PC_WFQ_CTL_P0 (1 << 8)
+#define INCA_IP_Switch_PC_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5)
+#define INCA_IP_Switch_PC_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2)
+#define INCA_IP_Switch_PC_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***PC TX Control Register***/
+#define INCA_IP_Switch_PC_TX_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0084))
+#define INCA_IP_Switch_PC_TX_CTL_ELR (1 << 1)
+#define INCA_IP_Switch_PC_TX_CTL_EER (1 << 0)
+
+/***LAN WFQ Control Register***/
+#define INCA_IP_Switch_LAN_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0100))
+#define INCA_IP_Switch_LAN_WFQ_CTL_P1 (1 << 9)
+#define INCA_IP_Switch_LAN_WFQ_CTL_P0 (1 << 8)
+#define INCA_IP_Switch_LAN_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5)
+#define INCA_IP_Switch_LAN_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2)
+#define INCA_IP_Switch_LAN_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***LAN TX Control Register***/
+#define INCA_IP_Switch_LAN_TX_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0104))
+#define INCA_IP_Switch_LAN_TX_CTL_ELR (1 << 1)
+#define INCA_IP_Switch_LAN_TX_CTL_EER (1 << 0)
+
+/***CPU WFQ Control Register***/
+#define INCA_IP_Switch_CPU_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0180))
+#define INCA_IP_Switch_CPU_WFQ_CTL_P1 (1 << 9)
+#define INCA_IP_Switch_CPU_WFQ_CTL_P0 (1 << 8)
+#define INCA_IP_Switch_CPU_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5)
+#define INCA_IP_Switch_CPU_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2)
+#define INCA_IP_Switch_CPU_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***PM PC RX Watermark Register***/
+#define INCA_IP_Switch_PC_WM ((volatile u32*)(INCA_IP_Switch+ 0x0200))
+#define INCA_IP_Switch_PC_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_Switch_PC_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16)
+#define INCA_IP_Switch_PC_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_Switch_PC_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***PM LAN RX Watermark Register***/
+#define INCA_IP_Switch_LAN_WM ((volatile u32*)(INCA_IP_Switch+ 0x0204))
+#define INCA_IP_Switch_LAN_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_Switch_LAN_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16)
+#define INCA_IP_Switch_LAN_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_Switch_LAN_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***PM CPU RX Watermark Register***/
+#define INCA_IP_Switch_CPU_WM ((volatile u32*)(INCA_IP_Switch+ 0x0208))
+#define INCA_IP_Switch_CPU_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_Switch_CPU_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16)
+#define INCA_IP_Switch_CPU_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_Switch_CPU_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***PM CPU RX Watermark Register***/
+#define INCA_IP_Switch_GBL_WM ((volatile u32*)(INCA_IP_Switch+ 0x020C))
+#define INCA_IP_Switch_GBL_WM_GBL_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_Switch_GBL_WM_GBL_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16)
+#define INCA_IP_Switch_GBL_WM_GBL_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_Switch_GBL_WM_GBL_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***PM Control Register***/
+#define INCA_IP_Switch_PM_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0210))
+#define INCA_IP_Switch_PM_CTL_GDN (1 << 3)
+#define INCA_IP_Switch_PM_CTL_CDN (1 << 2)
+#define INCA_IP_Switch_PM_CTL_LDN (1 << 1)
+#define INCA_IP_Switch_PM_CTL_PDN (1 << 0)
+
+/***PM Header Control Register***/
+#define INCA_IP_Switch_PMAC_HD_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0280))
+#define INCA_IP_Switch_PMAC_HD_CTL_RL2 (1 << 21)
+#define INCA_IP_Switch_PMAC_HD_CTL_RC (1 << 20)
+#define INCA_IP_Switch_PMAC_HD_CTL_CM (1 << 19)
+#define INCA_IP_Switch_PMAC_HD_CTL_CV (1 << 18)
+#define INCA_IP_Switch_PMAC_HD_CTL_TYPE_LEN (value) (((( 1 << 16) - 1) & (value)) << 2)
+#define INCA_IP_Switch_PMAC_HD_CTL_TAG (1 << 1)
+#define INCA_IP_Switch_PMAC_HD_CTL_ADD (1 << 0)
+
+/***PM Source Address Register 1***/
+#define INCA_IP_Switch_PMAC_SA1 ((volatile u32*)(INCA_IP_Switch+ 0x0284))
+#define INCA_IP_Switch_PMAC_SA1_SA_47_32 (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***PM Source Address Register 2***/
+#define INCA_IP_Switch_PMAC_SA2 ((volatile u32*)(INCA_IP_Switch+ 0x0288))
+#define INCA_IP_Switch_PMAC_SA2_SA_31_0
+
+/***PM Dest Address Register 1***/
+#define INCA_IP_Switch_PMAC_DA1 ((volatile u32*)(INCA_IP_Switch+ 0x028C))
+#define INCA_IP_Switch_PMAC_DA1_DA_47_32 (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***PM Dest Address Register 2***/
+#define INCA_IP_Switch_PMAC_DA2 ((volatile u32*)(INCA_IP_Switch+ 0x0290))
+#define INCA_IP_Switch_PMAC_DA2_DA_31_0
+
+/***PM VLAN Register***/
+#define INCA_IP_Switch_PMAC_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0294))
+#define INCA_IP_Switch_PMAC_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 13)
+#define INCA_IP_Switch_PMAC_VLAN_CFI (1 << 12)
+#define INCA_IP_Switch_PMAC_VLAN_VLANID (value) (((( 1 << 12) - 1) & (value)) << 0)
+
+/***PM TX IPG Counter Register***/
+#define INCA_IP_Switch_PMAC_TX_IPG ((volatile u32*)(INCA_IP_Switch+ 0x0298))
+#define INCA_IP_Switch_PMAC_TX_IPG_IPGCNT (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***PM RX IPG Counter Register***/
+#define INCA_IP_Switch_PMAC_RX_IPG ((volatile u32*)(INCA_IP_Switch+ 0x029C))
+#define INCA_IP_Switch_PMAC_RX_IPG_IPGCNT (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Mirror Register***/
+#define INCA_IP_Switch_MRR ((volatile u32*)(INCA_IP_Switch+ 0x0300))
+#define INCA_IP_Switch_MRR_MRR (value) (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_Switch_MRR_EC (1 << 5)
+#define INCA_IP_Switch_MRR_EL (1 << 4)
+#define INCA_IP_Switch_MRR_EP (1 << 3)
+#define INCA_IP_Switch_MRR_IC (1 << 2)
+#define INCA_IP_Switch_MRR_IL (1 << 1)
+#define INCA_IP_Switch_MRR_IP (1 << 0)
+
+/***Packet Length Register***/
+#define INCA_IP_Switch_PKT_LEN ((volatile u32*)(INCA_IP_Switch+ 0x0304))
+#define INCA_IP_Switch_PKT_LEN_ADD (1 << 11)
+#define INCA_IP_Switch_PKT_LEN_MAX_PKT_LEN (value) (((( 1 << 11) - 1) & (value)) << 0)
+
+/***MDIO Access Register***/
+#define INCA_IP_Switch_MDIO_ACC ((volatile u32*)(INCA_IP_Switch+ 0x0480))
+#define INCA_IP_Switch_MDIO_ACC_RA (1 << 31)
+#define INCA_IP_Switch_MDIO_ACC_RW (1 << 30)
+#define INCA_IP_Switch_MDIO_ACC_PHY_ADDR (value) (((( 1 << 5) - 1) & (value)) << 21)
+#define INCA_IP_Switch_MDIO_ACC_REG_ADDR (value) (((( 1 << 5) - 1) & (value)) << 16)
+#define INCA_IP_Switch_MDIO_ACC_PHY_DATA (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***Ethernet PHY Register***/
+#define INCA_IP_Switch_EPHY ((volatile u32*)(INCA_IP_Switch+ 0x0484))
+#define INCA_IP_Switch_EPHY_SL (1 << 7)
+#define INCA_IP_Switch_EPHY_SP (1 << 6)
+#define INCA_IP_Switch_EPHY_LL (1 << 5)
+#define INCA_IP_Switch_EPHY_LP (1 << 4)
+#define INCA_IP_Switch_EPHY_DL (1 << 3)
+#define INCA_IP_Switch_EPHY_DP (1 << 2)
+#define INCA_IP_Switch_EPHY_PL (1 << 1)
+#define INCA_IP_Switch_EPHY_PP (1 << 0)
+
+/***Pause Write Enable Register***/
+#define INCA_IP_Switch_PWR_EN ((volatile u32*)(INCA_IP_Switch+ 0x0488))
+#define INCA_IP_Switch_PWR_EN_PL (1 << 1)
+#define INCA_IP_Switch_PWR_EN_PP (1 << 0)
+
+/***MDIO Configuration Register***/
+#define INCA_IP_Switch_MDIO_CFG ((volatile u32*)(INCA_IP_Switch+ 0x048C))
+#define INCA_IP_Switch_MDIO_CFG_MDS (value) (((( 1 << 2) - 1) & (value)) << 14)
+#define INCA_IP_Switch_MDIO_CFG_PHY_LAN_ADDR (value) (((( 1 << 5) - 1) & (value)) << 9)
+#define INCA_IP_Switch_MDIO_CFG_PHY_PC_ADDR (value) (((( 1 << 5) - 1) & (value)) << 4)
+#define INCA_IP_Switch_MDIO_CFG_UEP (1 << 3)
+#define INCA_IP_Switch_MDIO_CFG_PS (1 << 2)
+#define INCA_IP_Switch_MDIO_CFG_PT (1 << 1)
+#define INCA_IP_Switch_MDIO_CFG_UMM (1 << 0)
+
+/***Clock Configuration Register***/
+#define INCA_IP_Switch_CLK_CFG ((volatile u32*)(INCA_IP_Switch+ 0x0500))
+#define INCA_IP_Switch_CLK_CFG_ARL_ID (1 << 9)
+#define INCA_IP_Switch_CLK_CFG_CPU_ID (1 << 8)
+#define INCA_IP_Switch_CLK_CFG_LAN_ID (1 << 7)
+#define INCA_IP_Switch_CLK_CFG_PC_ID (1 << 6)
+#define INCA_IP_Switch_CLK_CFG_SE_ID (1 << 5)
+
+/***********************************************************************/
+/* Module : SSC1 register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_SSC1 (0xB8000500)
+/***********************************************************************/
+
+
+/***Control Register (Programming Mode)***/
+#define INCA_IP_SSC1_SCC_CON_PRG ((volatile u32*)(INCA_IP_SSC1+ 0x0010))
+#define INCA_IP_SSC1_SCC_CON_PRG_EN (1 << 15)
+#define INCA_IP_SSC1_SCC_CON_PRG_MS (1 << 14)
+#define INCA_IP_SSC1_SCC_CON_PRG_AREN (1 << 12)
+#define INCA_IP_SSC1_SCC_CON_PRG_BEN (1 << 11)
+#define INCA_IP_SSC1_SCC_CON_PRG_PEN (1 << 10)
+#define INCA_IP_SSC1_SCC_CON_PRG_REN (1 << 9)
+#define INCA_IP_SSC1_SCC_CON_PRG_TEN (1 << 8)
+#define INCA_IP_SSC1_SCC_CON_PRG_LB (1 << 7)
+#define INCA_IP_SSC1_SCC_CON_PRG_PO (1 << 6)
+#define INCA_IP_SSC1_SCC_CON_PRG_PH (1 << 5)
+#define INCA_IP_SSC1_SCC_CON_PRG_HB (1 << 4)
+#define INCA_IP_SSC1_SCC_CON_PRG_BM (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***SCC Control Register (Operating Mode)***/
+#define INCA_IP_SSC1_SCC_CON_OPR ((volatile u32*)(INCA_IP_SSC1+ 0x0010))
+#define INCA_IP_SSC1_SCC_CON_OPR_EN (1 << 15)
+#define INCA_IP_SSC1_SCC_CON_OPR_MS (1 << 14)
+#define INCA_IP_SSC1_SCC_CON_OPR_BSY (1 << 12)
+#define INCA_IP_SSC1_SCC_CON_OPR_BE (1 << 11)
+#define INCA_IP_SSC1_SCC_CON_OPR_PE (1 << 10)
+#define INCA_IP_SSC1_SCC_CON_OPR_RE (1 << 9)
+#define INCA_IP_SSC1_SCC_CON_OPR_TE (1 << 8)
+#define INCA_IP_SSC1_SCC_CON_OPR_BC (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***SSC Write Hardware Modified Control Register***/
+#define INCA_IP_SSC1_SSC_WHBCON ((volatile u32*)(INCA_IP_SSC1+ 0x0040))
+#define INCA_IP_SSC1_SSC_WHBCON_SETBE (1 << 15)
+#define INCA_IP_SSC1_SSC_WHBCON_SETPE (1 << 14)
+#define INCA_IP_SSC1_SSC_WHBCON_SETRE (1 << 13)
+#define INCA_IP_SSC1_SSC_WHBCON_SETTE (1 << 12)
+#define INCA_IP_SSC1_SSC_WHBCON_CLRBE (1 << 11)
+#define INCA_IP_SSC1_SSC_WHBCON_CLRPE (1 << 10)
+#define INCA_IP_SSC1_SSC_WHBCON_CLRRE (1 << 9)
+#define INCA_IP_SSC1_SSC_WHBCON_CLRTE (1 << 8)
+
+/***SSC Baudrate Timer Reload Register***/
+#define INCA_IP_SSC1_SSC_BR ((volatile u32*)(INCA_IP_SSC1+ 0x0014))
+#define INCA_IP_SSC1_SSC_BR_BR_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***SSC Transmitter Buffer Register***/
+#define INCA_IP_SSC1_SSC_TB ((volatile u32*)(INCA_IP_SSC1+ 0x0020))
+#define INCA_IP_SSC1_SSC_TB_TB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***SSC Receiver Buffer Register***/
+#define INCA_IP_SSC1_SSC_RB ((volatile u32*)(INCA_IP_SSC1+ 0x0024))
+#define INCA_IP_SSC1_SSC_RB_RB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***SSC Receive FIFO Control Register***/
+#define INCA_IP_SSC1_SSC_RXFCON ((volatile u32*)(INCA_IP_SSC1+ 0x0030))
+#define INCA_IP_SSC1_SSC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC1_SSC_RXFCON_RXTMEN (1 << 2)
+#define INCA_IP_SSC1_SSC_RXFCON_RXFLU (1 << 1)
+#define INCA_IP_SSC1_SSC_RXFCON_RXFEN (1 << 0)
+
+/***SSC Transmit FIFO Control Register***/
+#define INCA_IP_SSC1_SSC_TXFCON ((volatile u32*)(INCA_IP_SSC1+ 0x0034))
+#define INCA_IP_SSC1_SSC_TXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC1_SSC_TXFCON_TXTMEN (1 << 2)
+#define INCA_IP_SSC1_SSC_TXFCON_TXFLU (1 << 1)
+#define INCA_IP_SSC1_SSC_TXFCON_TXFEN (1 << 0)
+
+/***SSC FIFO Status Register***/
+#define INCA_IP_SSC1_SSC_FSTAT ((volatile u32*)(INCA_IP_SSC1+ 0x0038))
+#define INCA_IP_SSC1_SSC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC1_SSC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0)
+
+/***SSC Clock Control Register***/
+#define INCA_IP_SSC1_SSC_CLC ((volatile u32*)(INCA_IP_SSC1+ 0x0000))
+#define INCA_IP_SSC1_SSC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_SSC1_SSC_CLC_DISS (1 << 1)
+#define INCA_IP_SSC1_SSC_CLC_DISR (1 << 0)
+
+/***********************************************************************/
+/* Module : SSC2 register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_SSC2 (0xB8000600)
+/***********************************************************************/
+
+
+/***Control Register (Programming Mode)***/
+#define INCA_IP_SSC2_SCC_CON_PRG ((volatile u32*)(INCA_IP_SSC2+ 0x0010))
+#define INCA_IP_SSC2_SCC_CON_PRG_EN (1 << 15)
+#define INCA_IP_SSC2_SCC_CON_PRG_MS (1 << 14)
+#define INCA_IP_SSC2_SCC_CON_PRG_AREN (1 << 12)
+#define INCA_IP_SSC2_SCC_CON_PRG_BEN (1 << 11)
+#define INCA_IP_SSC2_SCC_CON_PRG_PEN (1 << 10)
+#define INCA_IP_SSC2_SCC_CON_PRG_REN (1 << 9)
+#define INCA_IP_SSC2_SCC_CON_PRG_TEN (1 << 8)
+#define INCA_IP_SSC2_SCC_CON_PRG_LB (1 << 7)
+#define INCA_IP_SSC2_SCC_CON_PRG_PO (1 << 6)
+#define INCA_IP_SSC2_SCC_CON_PRG_PH (1 << 5)
+#define INCA_IP_SSC2_SCC_CON_PRG_HB (1 << 4)
+#define INCA_IP_SSC2_SCC_CON_PRG_BM (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***SCC Control Register (Operating Mode)***/
+#define INCA_IP_SSC2_SCC_CON_OPR ((volatile u32*)(INCA_IP_SSC2+ 0x0010))
+#define INCA_IP_SSC2_SCC_CON_OPR_EN (1 << 15)
+#define INCA_IP_SSC2_SCC_CON_OPR_MS (1 << 14)
+#define INCA_IP_SSC2_SCC_CON_OPR_BSY (1 << 12)
+#define INCA_IP_SSC2_SCC_CON_OPR_BE (1 << 11)
+#define INCA_IP_SSC2_SCC_CON_OPR_PE (1 << 10)
+#define INCA_IP_SSC2_SCC_CON_OPR_RE (1 << 9)
+#define INCA_IP_SSC2_SCC_CON_OPR_TE (1 << 8)
+#define INCA_IP_SSC2_SCC_CON_OPR_BC (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***SSC Write Hardware Modified Control Register***/
+#define INCA_IP_SSC2_SSC_WHBCON ((volatile u32*)(INCA_IP_SSC2+ 0x0040))
+#define INCA_IP_SSC2_SSC_WHBCON_SETBE (1 << 15)
+#define INCA_IP_SSC2_SSC_WHBCON_SETPE (1 << 14)
+#define INCA_IP_SSC2_SSC_WHBCON_SETRE (1 << 13)
+#define INCA_IP_SSC2_SSC_WHBCON_SETTE (1 << 12)
+#define INCA_IP_SSC2_SSC_WHBCON_CLRBE (1 << 11)
+#define INCA_IP_SSC2_SSC_WHBCON_CLRPE (1 << 10)
+#define INCA_IP_SSC2_SSC_WHBCON_CLRRE (1 << 9)
+#define INCA_IP_SSC2_SSC_WHBCON_CLRTE (1 << 8)
+
+/***SSC Baudrate Timer Reload Register***/
+#define INCA_IP_SSC2_SSC_BR ((volatile u32*)(INCA_IP_SSC2+ 0x0014))
+#define INCA_IP_SSC2_SSC_BR_BR_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***SSC Transmitter Buffer Register***/
+#define INCA_IP_SSC2_SSC_TB ((volatile u32*)(INCA_IP_SSC2+ 0x0020))
+#define INCA_IP_SSC2_SSC_TB_TB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***SSC Receiver Buffer Register***/
+#define INCA_IP_SSC2_SSC_RB ((volatile u32*)(INCA_IP_SSC2+ 0x0024))
+#define INCA_IP_SSC2_SSC_RB_RB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***SSC Receive FIFO Control Register***/
+#define INCA_IP_SSC2_SSC_RXFCON ((volatile u32*)(INCA_IP_SSC2+ 0x0030))
+#define INCA_IP_SSC2_SSC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC2_SSC_RXFCON_RXTMEN (1 << 2)
+#define INCA_IP_SSC2_SSC_RXFCON_RXFLU (1 << 1)
+#define INCA_IP_SSC2_SSC_RXFCON_RXFEN (1 << 0)
+
+/***SSC Transmit FIFO Control Register***/
+#define INCA_IP_SSC2_SSC_TXFCON ((volatile u32*)(INCA_IP_SSC2+ 0x0034))
+#define INCA_IP_SSC2_SSC_TXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC2_SSC_TXFCON_TXTMEN (1 << 2)
+#define INCA_IP_SSC2_SSC_TXFCON_TXFLU (1 << 1)
+#define INCA_IP_SSC2_SSC_TXFCON_TXFEN (1 << 0)
+
+/***SSC FIFO Status Register***/
+#define INCA_IP_SSC2_SSC_FSTAT ((volatile u32*)(INCA_IP_SSC2+ 0x0038))
+#define INCA_IP_SSC2_SSC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_SSC2_SSC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0)
+
+/***SSC Clock Control Register***/
+#define INCA_IP_SSC2_SSC_CLC ((volatile u32*)(INCA_IP_SSC2+ 0x0000))
+#define INCA_IP_SSC2_SSC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_SSC2_SSC_CLC_DISS (1 << 1)
+#define INCA_IP_SSC2_SSC_CLC_DISR (1 << 0)
+
+/***********************************************************************/
+/* Module : EBU register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_EBU (0xB8000200)
+/***********************************************************************/
+
+
+/***EBU Clock Control Register***/
+#define INCA_IP_EBU_EBU_CLC ((volatile u32*)(INCA_IP_EBU+ 0x0000))
+#define INCA_IP_EBU_EBU_CLC_DISS (1 << 1)
+#define INCA_IP_EBU_EBU_CLC_DISR (1 << 0)
+
+/***EBU Global Control Register***/
+#define INCA_IP_EBU_EBU_CON ((volatile u32*)(INCA_IP_EBU+ 0x0010))
+#define INCA_IP_EBU_EBU_CON_DTACS (value) (((( 1 << 3) - 1) & (value)) << 20)
+#define INCA_IP_EBU_EBU_CON_DTARW (value) (((( 1 << 3) - 1) & (value)) << 16)
+#define INCA_IP_EBU_EBU_CON_TOUTC (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_EBU_EBU_CON_ARBMODE (value) (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_EBU_EBU_CON_ARBSYNC (1 << 5)
+#define INCA_IP_EBU_EBU_CON_1 (1 << 3)
+
+/***EBU Address Select Register 0***/
+#define INCA_IP_EBU_EBU_ADDSEL0 ((volatile u32*)(INCA_IP_EBU+ 0x0020))
+#define INCA_IP_EBU_EBU_ADDSEL0_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
+#define INCA_IP_EBU_EBU_ADDSEL0_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_ADDSEL0_MIRRORE (1 << 1)
+#define INCA_IP_EBU_EBU_ADDSEL0_REGEN (1 << 0)
+
+/***EBU Address Select Register 1***/
+#define INCA_IP_EBU_EBU_ADDSEL1 ((volatile u32*)(INCA_IP_EBU+ 0x0024))
+#define INCA_IP_EBU_EBU_ADDSEL1_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
+#define INCA_IP_EBU_EBU_ADDSEL1_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_ADDSEL1_MIRRORE (1 << 1)
+#define INCA_IP_EBU_EBU_ADDSEL1_REGEN (1 << 0)
+
+/***EBU Address Select Register 2***/
+#define INCA_IP_EBU_EBU_ADDSEL2 ((volatile u32*)(INCA_IP_EBU+ 0x0028))
+#define INCA_IP_EBU_EBU_ADDSEL2_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
+#define INCA_IP_EBU_EBU_ADDSEL2_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_ADDSEL2_MIRRORE (1 << 1)
+#define INCA_IP_EBU_EBU_ADDSEL2_REGEN (1 << 0)
+
+/***EBU Bus Configuration Register 0***/
+#define INCA_IP_EBU_EBU_BUSCON0 ((volatile u32*)(INCA_IP_EBU+ 0x0060))
+#define INCA_IP_EBU_EBU_BUSCON0_WRDIS (1 << 31)
+#define INCA_IP_EBU_EBU_BUSCON0_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
+#define INCA_IP_EBU_EBU_BUSCON0_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
+#define INCA_IP_EBU_EBU_BUSCON0_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
+#define INCA_IP_EBU_EBU_BUSCON0_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
+#define INCA_IP_EBU_EBU_BUSCON0_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
+#define INCA_IP_EBU_EBU_BUSCON0_WAITINV (1 << 19)
+#define INCA_IP_EBU_EBU_BUSCON0_SETUP (1 << 18)
+#define INCA_IP_EBU_EBU_BUSCON0_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
+#define INCA_IP_EBU_EBU_BUSCON0_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
+#define INCA_IP_EBU_EBU_BUSCON0_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
+#define INCA_IP_EBU_EBU_BUSCON0_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_BUSCON0_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_EBU_EBU_BUSCON0_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***EBU Bus Configuration Register 1***/
+#define INCA_IP_EBU_EBU_BUSCON1 ((volatile u32*)(INCA_IP_EBU+ 0x0064))
+#define INCA_IP_EBU_EBU_BUSCON1_WRDIS (1 << 31)
+#define INCA_IP_EBU_EBU_BUSCON1_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
+#define INCA_IP_EBU_EBU_BUSCON1_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
+#define INCA_IP_EBU_EBU_BUSCON1_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
+#define INCA_IP_EBU_EBU_BUSCON1_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
+#define INCA_IP_EBU_EBU_BUSCON1_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
+#define INCA_IP_EBU_EBU_BUSCON1_WAITINV (1 << 19)
+#define INCA_IP_EBU_EBU_BUSCON1_SETUP (1 << 18)
+#define INCA_IP_EBU_EBU_BUSCON1_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
+#define INCA_IP_EBU_EBU_BUSCON1_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
+#define INCA_IP_EBU_EBU_BUSCON1_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
+#define INCA_IP_EBU_EBU_BUSCON1_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_BUSCON1_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_EBU_EBU_BUSCON1_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***EBU Bus Configuration Register 2***/
+#define INCA_IP_EBU_EBU_BUSCON2 ((volatile u32*)(INCA_IP_EBU+ 0x0068))
+#define INCA_IP_EBU_EBU_BUSCON2_WRDIS (1 << 31)
+#define INCA_IP_EBU_EBU_BUSCON2_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
+#define INCA_IP_EBU_EBU_BUSCON2_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
+#define INCA_IP_EBU_EBU_BUSCON2_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
+#define INCA_IP_EBU_EBU_BUSCON2_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
+#define INCA_IP_EBU_EBU_BUSCON2_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
+#define INCA_IP_EBU_EBU_BUSCON2_WAITINV (1 << 19)
+#define INCA_IP_EBU_EBU_BUSCON2_SETUP (1 << 18)
+#define INCA_IP_EBU_EBU_BUSCON2_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
+#define INCA_IP_EBU_EBU_BUSCON2_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
+#define INCA_IP_EBU_EBU_BUSCON2_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
+#define INCA_IP_EBU_EBU_BUSCON2_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_EBU_EBU_BUSCON2_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_EBU_EBU_BUSCON2_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : SDRAM register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_SDRAM (0xBF800000)
+/***********************************************************************/
+
+
+/***MC Access Error Cause Register***/
+#define INCA_IP_SDRAM_MC_ERRCAUSE ((volatile u32*)(INCA_IP_SDRAM+ 0x0100))
+#define INCA_IP_SDRAM_MC_ERRCAUSE_ERR (1 << 31)
+#define INCA_IP_SDRAM_MC_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_SDRAM_MC_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
+#define INCA_IP_SDRAM_MC_ERRCAUSE_Res (value) (((( 1 << NaN) - 1) & (value)) << NaN)
+
+/***MC Access Error Address Register***/
+#define INCA_IP_SDRAM_MC_ERRADDR ((volatile u32*)(INCA_IP_SDRAM+ 0x0108))
+#define INCA_IP_SDRAM_MC_ERRADDR_ADDR
+
+/***MC I/O General Purpose Register***/
+#define INCA_IP_SDRAM_MC_IOGP ((volatile u32*)(INCA_IP_SDRAM+ 0x0800))
+#define INCA_IP_SDRAM_MC_IOGP_GPR6 (value) (((( 1 << 4) - 1) & (value)) << 28)
+#define INCA_IP_SDRAM_MC_IOGP_GPR5 (value) (((( 1 << 4) - 1) & (value)) << 24)
+#define INCA_IP_SDRAM_MC_IOGP_GPR4 (value) (((( 1 << 4) - 1) & (value)) << 20)
+#define INCA_IP_SDRAM_MC_IOGP_GPR3 (value) (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_SDRAM_MC_IOGP_GPR2 (value) (((( 1 << 4) - 1) & (value)) << 12)
+#define INCA_IP_SDRAM_MC_IOGP_CPS (1 << 11)
+#define INCA_IP_SDRAM_MC_IOGP_CLKDELAY (value) (((( 1 << 3) - 1) & (value)) << 8)
+#define INCA_IP_SDRAM_MC_IOGP_CLKRAT (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_SDRAM_MC_IOGP_RDDEL (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***MC Self Refresh Register***/
+#define INCA_IP_SDRAM_MC_SELFRFSH ((volatile u32*)(INCA_IP_SDRAM+ 0x0A00))
+#define INCA_IP_SDRAM_MC_SELFRFSH_PWDS (1 << 1)
+#define INCA_IP_SDRAM_MC_SELFRFSH_PWD (1 << 0)
+#define INCA_IP_SDRAM_MC_SELFRFSH_Res (value) (((( 1 << 30) - 1) & (value)) << 2)
+
+/***MC Enable Register***/
+#define INCA_IP_SDRAM_MC_CTRLENA ((volatile u32*)(INCA_IP_SDRAM+ 0x1000))
+#define INCA_IP_SDRAM_MC_CTRLENA_ENA (1 << 0)
+#define INCA_IP_SDRAM_MC_CTRLENA_Res (value) (((( 1 << 31) - 1) & (value)) << 1)
+
+/***MC Mode Register Setup Code***/
+#define INCA_IP_SDRAM_MC_MRSCODE ((volatile u32*)(INCA_IP_SDRAM+ 0x1008))
+#define INCA_IP_SDRAM_MC_MRSCODE_UMC (value) (((( 1 << 5) - 1) & (value)) << 7)
+#define INCA_IP_SDRAM_MC_MRSCODE_CL (value) (((( 1 << 3) - 1) & (value)) << 4)
+#define INCA_IP_SDRAM_MC_MRSCODE_WT (1 << 3)
+#define INCA_IP_SDRAM_MC_MRSCODE_BL (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***MC Configuration Data-word Width Register***/
+#define INCA_IP_SDRAM_MC_CFGDW ((volatile u32*)(INCA_IP_SDRAM+ 0x1010))
+#define INCA_IP_SDRAM_MC_CFGDW_DW (value) (((( 1 << 4) - 1) & (value)) << 0)
+#define INCA_IP_SDRAM_MC_CFGDW_Res (value) (((( 1 << 28) - 1) & (value)) << 4)
+
+/***MC Configuration Physical Bank 0 Register***/
+#define INCA_IP_SDRAM_MC_CFGPB0 ((volatile u32*)(INCA_IP_SDRAM+ 0x1018))
+#define INCA_IP_SDRAM_MC_CFGPB0_MCSEN0 (value) (((( 1 << 4) - 1) & (value)) << 12)
+#define INCA_IP_SDRAM_MC_CFGPB0_BANKN0 (value) (((( 1 << 4) - 1) & (value)) << 8)
+#define INCA_IP_SDRAM_MC_CFGPB0_ROWW0 (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_SDRAM_MC_CFGPB0_COLW0 (value) (((( 1 << 4) - 1) & (value)) << 0)
+#define INCA_IP_SDRAM_MC_CFGPB0_Res (value) (((( 1 << 16) - 1) & (value)) << 16)
+
+/***MC Latency Register***/
+#define INCA_IP_SDRAM_MC_LATENCY ((volatile u32*)(INCA_IP_SDRAM+ 0x1038))
+#define INCA_IP_SDRAM_MC_LATENCY_TRP (value) (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_SDRAM_MC_LATENCY_TRAS (value) (((( 1 << 4) - 1) & (value)) << 12)
+#define INCA_IP_SDRAM_MC_LATENCY_TRCD (value) (((( 1 << 4) - 1) & (value)) << 8)
+#define INCA_IP_SDRAM_MC_LATENCY_TDPL (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_SDRAM_MC_LATENCY_TDAL (value) (((( 1 << 4) - 1) & (value)) << 0)
+#define INCA_IP_SDRAM_MC_LATENCY_Res (value) (((( 1 << 12) - 1) & (value)) << 20)
+
+/***MC Refresh Cycle Time Register***/
+#define INCA_IP_SDRAM_MC_TREFRESH ((volatile u32*)(INCA_IP_SDRAM+ 0x1040))
+#define INCA_IP_SDRAM_MC_TREFRESH_TREF (value) (((( 1 << 13) - 1) & (value)) << 0)
+#define INCA_IP_SDRAM_MC_TREFRESH_Res (value) (((( 1 << 19) - 1) & (value)) << 13)
+
+/***********************************************************************/
+/* Module : GPTU register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_GPTU (0xB8000300)
+/***********************************************************************/
+
+
+/***GPT Clock Control Register***/
+#define INCA_IP_GPTU_GPT_CLC ((volatile u32*)(INCA_IP_GPTU+ 0x0000))
+#define INCA_IP_GPTU_GPT_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_GPTU_GPT_CLC_DISS (1 << 1)
+#define INCA_IP_GPTU_GPT_CLC_DISR (1 << 0)
+
+/***GPT Timer 3 Control Register***/
+#define INCA_IP_GPTU_GPT_T3CON ((volatile u32*)(INCA_IP_GPTU+ 0x0014))
+#define INCA_IP_GPTU_GPT_T3CON_T3RDIR (1 << 15)
+#define INCA_IP_GPTU_GPT_T3CON_T3CHDIR (1 << 14)
+#define INCA_IP_GPTU_GPT_T3CON_T3EDGE (1 << 13)
+#define INCA_IP_GPTU_GPT_T3CON_BPS1 (value) (((( 1 << 2) - 1) & (value)) << 11)
+#define INCA_IP_GPTU_GPT_T3CON_T3OTL (1 << 10)
+#define INCA_IP_GPTU_GPT_T3CON_T3UD (1 << 7)
+#define INCA_IP_GPTU_GPT_T3CON_T3R (1 << 6)
+#define INCA_IP_GPTU_GPT_T3CON_T3M (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_GPTU_GPT_T3CON_T3I (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write Hardware Modified Timer 3 Control Register
+If set and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define INCA_IP_GPTU_GPT_WHBT3CON ((volatile u32*)(INCA_IP_GPTU+ 0x004C))
+#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3CHDIR (1 << 15)
+#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3CHDIR (1 << 14)
+#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3EDGE (1 << 13)
+#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3EDGE (1 << 12)
+#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3OTL (1 << 11)
+#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3OTL (1 << 10)
+
+/***GPT Timer 2 Control Register***/
+#define INCA_IP_GPTU_GPT_T2CON ((volatile u32*)(INCA_IP_GPTU+ 0x0010))
+#define INCA_IP_GPTU_GPT_T2CON_TxRDIR (1 << 15)
+#define INCA_IP_GPTU_GPT_T2CON_TxCHDIR (1 << 14)
+#define INCA_IP_GPTU_GPT_T2CON_TxEDGE (1 << 13)
+#define INCA_IP_GPTU_GPT_T2CON_TxIRDIS (1 << 12)
+#define INCA_IP_GPTU_GPT_T2CON_TxRC (1 << 9)
+#define INCA_IP_GPTU_GPT_T2CON_TxUD (1 << 7)
+#define INCA_IP_GPTU_GPT_T2CON_TxR (1 << 6)
+#define INCA_IP_GPTU_GPT_T2CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_GPTU_GPT_T2CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Timer 4 Control Register***/
+#define INCA_IP_GPTU_GPT_T4CON ((volatile u32*)(INCA_IP_GPTU+ 0x0018))
+#define INCA_IP_GPTU_GPT_T4CON_TxRDIR (1 << 15)
+#define INCA_IP_GPTU_GPT_T4CON_TxCHDIR (1 << 14)
+#define INCA_IP_GPTU_GPT_T4CON_TxEDGE (1 << 13)
+#define INCA_IP_GPTU_GPT_T4CON_TxIRDIS (1 << 12)
+#define INCA_IP_GPTU_GPT_T4CON_TxRC (1 << 9)
+#define INCA_IP_GPTU_GPT_T4CON_TxUD (1 << 7)
+#define INCA_IP_GPTU_GPT_T4CON_TxR (1 << 6)
+#define INCA_IP_GPTU_GPT_T4CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_GPTU_GPT_T4CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write HW Modified Timer 2 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define INCA_IP_GPTU_GPT_WHBT2CON ((volatile u32*)(INCA_IP_GPTU+ 0x0048))
+#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxCHDIR (1 << 15)
+#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxCHDIR (1 << 14)
+#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxEDGE (1 << 13)
+#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxEDGE (1 << 12)
+
+/***GPT Write HW Modified Timer 4 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define INCA_IP_GPTU_GPT_WHBT4CON ((volatile u32*)(INCA_IP_GPTU+ 0x0050))
+#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxCHDIR (1 << 15)
+#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxCHDIR (1 << 14)
+#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxEDGE (1 << 13)
+#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxEDGE (1 << 12)
+
+/***GPT Capture Reload Register***/
+#define INCA_IP_GPTU_GPT_CAPREL ((volatile u32*)(INCA_IP_GPTU+ 0x0030))
+#define INCA_IP_GPTU_GPT_CAPREL_CAPREL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 2 Register***/
+#define INCA_IP_GPTU_GPT_T2 ((volatile u32*)(INCA_IP_GPTU+ 0x0034))
+#define INCA_IP_GPTU_GPT_T2_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 3 Register***/
+#define INCA_IP_GPTU_GPT_T3 ((volatile u32*)(INCA_IP_GPTU+ 0x0038))
+#define INCA_IP_GPTU_GPT_T3_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 4 Register***/
+#define INCA_IP_GPTU_GPT_T4 ((volatile u32*)(INCA_IP_GPTU+ 0x003C))
+#define INCA_IP_GPTU_GPT_T4_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 5 Register***/
+#define INCA_IP_GPTU_GPT_T5 ((volatile u32*)(INCA_IP_GPTU+ 0x0040))
+#define INCA_IP_GPTU_GPT_T5_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 6 Register***/
+#define INCA_IP_GPTU_GPT_T6 ((volatile u32*)(INCA_IP_GPTU+ 0x0044))
+#define INCA_IP_GPTU_GPT_T6_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 6 Control Register***/
+#define INCA_IP_GPTU_GPT_T6CON ((volatile u32*)(INCA_IP_GPTU+ 0x0020))
+#define INCA_IP_GPTU_GPT_T6CON_T6SR (1 << 15)
+#define INCA_IP_GPTU_GPT_T6CON_T6CLR (1 << 14)
+#define INCA_IP_GPTU_GPT_T6CON_BPS2 (value) (((( 1 << 2) - 1) & (value)) << 11)
+#define INCA_IP_GPTU_GPT_T6CON_T6OTL (1 << 10)
+#define INCA_IP_GPTU_GPT_T6CON_T6UD (1 << 7)
+#define INCA_IP_GPTU_GPT_T6CON_T6R (1 << 6)
+#define INCA_IP_GPTU_GPT_T6CON_T6M (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_GPTU_GPT_T6CON_T6I (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write HW Modified Timer 6 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define INCA_IP_GPTU_GPT_WHBT6CON ((volatile u32*)(INCA_IP_GPTU+ 0x0054))
+#define INCA_IP_GPTU_GPT_WHBT6CON_SETT6OTL (1 << 11)
+#define INCA_IP_GPTU_GPT_WHBT6CON_CLRT6OTL (1 << 10)
+
+/***GPT Timer 5 Control Register***/
+#define INCA_IP_GPTU_GPT_T5CON ((volatile u32*)(INCA_IP_GPTU+ 0x001C))
+#define INCA_IP_GPTU_GPT_T5CON_T5SC (1 << 15)
+#define INCA_IP_GPTU_GPT_T5CON_T5CLR (1 << 14)
+#define INCA_IP_GPTU_GPT_T5CON_CI (value) (((( 1 << 2) - 1) & (value)) << 12)
+#define INCA_IP_GPTU_GPT_T5CON_T5CC (1 << 11)
+#define INCA_IP_GPTU_GPT_T5CON_CT3 (1 << 10)
+#define INCA_IP_GPTU_GPT_T5CON_T5RC (1 << 9)
+#define INCA_IP_GPTU_GPT_T5CON_T5UDE (1 << 8)
+#define INCA_IP_GPTU_GPT_T5CON_T5UD (1 << 7)
+#define INCA_IP_GPTU_GPT_T5CON_T5R (1 << 6)
+#define INCA_IP_GPTU_GPT_T5CON_T5M (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_GPTU_GPT_T5CON_T5I (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : IOM register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_IOM (0xBF105000)
+/***********************************************************************/
+
+
+/***Receive FIFO***/
+#define INCA_IP_IOM_RFIFO ((volatile u32*)(INCA_IP_IOM+ 0x0000))
+#define INCA_IP_IOM_RFIFO_RXD (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Transmit FIFO***/
+#define INCA_IP_IOM_XFIFO ((volatile u32*)(INCA_IP_IOM+ 0x0000))
+#define INCA_IP_IOM_XFIFO_TXD (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Interrupt Status Register HDLC***/
+#define INCA_IP_IOM_ISTAH ((volatile u32*)(INCA_IP_IOM+ 0x0080))
+#define INCA_IP_IOM_ISTAH_RME (1 << 7)
+#define INCA_IP_IOM_ISTAH_RPF (1 << 6)
+#define INCA_IP_IOM_ISTAH_RFO (1 << 5)
+#define INCA_IP_IOM_ISTAH_XPR (1 << 4)
+#define INCA_IP_IOM_ISTAH_XMR (1 << 3)
+#define INCA_IP_IOM_ISTAH_XDU (1 << 2)
+
+/***Interrupt Mask Register HDLC***/
+#define INCA_IP_IOM_MASKH ((volatile u32*)(INCA_IP_IOM+ 0x0080))
+#define INCA_IP_IOM_MASKH_RME (1 << 7)
+#define INCA_IP_IOM_MASKH_RPF (1 << 6)
+#define INCA_IP_IOM_MASKH_RFO (1 << 5)
+#define INCA_IP_IOM_MASKH_XPR (1 << 4)
+#define INCA_IP_IOM_MASKH_XMR (1 << 3)
+#define INCA_IP_IOM_MASKH_XDU (1 << 2)
+
+/***Status Register***/
+#define INCA_IP_IOM_STAR ((volatile u32*)(INCA_IP_IOM+ 0x0084))
+#define INCA_IP_IOM_STAR_XDOV (1 << 7)
+#define INCA_IP_IOM_STAR_XFW (1 << 6)
+#define INCA_IP_IOM_STAR_RACI (1 << 3)
+#define INCA_IP_IOM_STAR_XACI (1 << 1)
+
+/***Command Register***/
+#define INCA_IP_IOM_CMDR ((volatile u32*)(INCA_IP_IOM+ 0x0084))
+#define INCA_IP_IOM_CMDR_RMC (1 << 7)
+#define INCA_IP_IOM_CMDR_RRES (1 << 6)
+#define INCA_IP_IOM_CMDR_XTF (1 << 3)
+#define INCA_IP_IOM_CMDR_XME (1 << 1)
+#define INCA_IP_IOM_CMDR_XRES (1 << 0)
+
+/***Mode Register***/
+#define INCA_IP_IOM_MODEH ((volatile u32*)(INCA_IP_IOM+ 0x0088))
+#define INCA_IP_IOM_MODEH_MDS2 (1 << 7)
+#define INCA_IP_IOM_MODEH_MDS1 (1 << 6)
+#define INCA_IP_IOM_MODEH_MDS0 (1 << 5)
+#define INCA_IP_IOM_MODEH_RAC (1 << 3)
+#define INCA_IP_IOM_MODEH_DIM2 (1 << 2)
+#define INCA_IP_IOM_MODEH_DIM1 (1 << 1)
+#define INCA_IP_IOM_MODEH_DIM0 (1 << 0)
+
+/***Extended Mode Register***/
+#define INCA_IP_IOM_EXMR ((volatile u32*)(INCA_IP_IOM+ 0x008C))
+#define INCA_IP_IOM_EXMR_XFBS (1 << 7)
+#define INCA_IP_IOM_EXMR_RFBS (value) (((( 1 << 2) - 1) & (value)) << 5)
+#define INCA_IP_IOM_EXMR_SRA (1 << 4)
+#define INCA_IP_IOM_EXMR_XCRC (1 << 3)
+#define INCA_IP_IOM_EXMR_RCRC (1 << 2)
+#define INCA_IP_IOM_EXMR_ITF (1 << 0)
+
+/***SAPI1 Register***/
+#define INCA_IP_IOM_SAP1 ((volatile u32*)(INCA_IP_IOM+ 0x0094))
+#define INCA_IP_IOM_SAP1_SAPI1 (value) (((( 1 << 6) - 1) & (value)) << 2)
+#define INCA_IP_IOM_SAP1_MHA (1 << 0)
+
+/***Receive Frame Byte Count Low***/
+#define INCA_IP_IOM_RBCL ((volatile u32*)(INCA_IP_IOM+ 0x0098))
+#define INCA_IP_IOM_RBCL_RBC(value) (1 << value)
+
+
+/***SAPI2 Register***/
+#define INCA_IP_IOM_SAP2 ((volatile u32*)(INCA_IP_IOM+ 0x0098))
+#define INCA_IP_IOM_SAP2_SAPI2 (value) (((( 1 << 6) - 1) & (value)) << 2)
+#define INCA_IP_IOM_SAP2_MLA (1 << 0)
+
+/***Receive Frame Byte Count High***/
+#define INCA_IP_IOM_RBCH ((volatile u32*)(INCA_IP_IOM+ 0x009C))
+#define INCA_IP_IOM_RBCH_OV (1 << 4)
+#define INCA_IP_IOM_RBCH_RBC11 (1 << 3)
+#define INCA_IP_IOM_RBCH_RBC10 (1 << 2)
+#define INCA_IP_IOM_RBCH_RBC9 (1 << 1)
+#define INCA_IP_IOM_RBCH_RBC8 (1 << 0)
+
+/***TEI1 Register 1***/
+#define INCA_IP_IOM_TEI1 ((volatile u32*)(INCA_IP_IOM+ 0x009C))
+#define INCA_IP_IOM_TEI1_TEI1 (value) (((( 1 << 7) - 1) & (value)) << 1)
+#define INCA_IP_IOM_TEI1_EA (1 << 0)
+
+/***Receive Status Register***/
+#define INCA_IP_IOM_RSTA ((volatile u32*)(INCA_IP_IOM+ 0x00A0))
+#define INCA_IP_IOM_RSTA_VFR (1 << 7)
+#define INCA_IP_IOM_RSTA_RDO (1 << 6)
+#define INCA_IP_IOM_RSTA_CRC (1 << 5)
+#define INCA_IP_IOM_RSTA_RAB (1 << 4)
+#define INCA_IP_IOM_RSTA_SA1 (1 << 3)
+#define INCA_IP_IOM_RSTA_SA0 (1 << 2)
+#define INCA_IP_IOM_RSTA_TA (1 << 0)
+#define INCA_IP_IOM_RSTA_CR (1 << 1)
+
+/***TEI2 Register***/
+#define INCA_IP_IOM_TEI2 ((volatile u32*)(INCA_IP_IOM+ 0x00A0))
+#define INCA_IP_IOM_TEI2_TEI2 (value) (((( 1 << 7) - 1) & (value)) << 1)
+#define INCA_IP_IOM_TEI2_EA (1 << 0)
+
+/***Test Mode Register HDLC***/
+#define INCA_IP_IOM_TMH ((volatile u32*)(INCA_IP_IOM+ 0x00A4))
+#define INCA_IP_IOM_TMH_TLP (1 << 0)
+
+/***Command/Indication Receive 0***/
+#define INCA_IP_IOM_CIR0 ((volatile u32*)(INCA_IP_IOM+ 0x00B8))
+#define INCA_IP_IOM_CIR0_CODR0 (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_IOM_CIR0_CIC0 (1 << 3)
+#define INCA_IP_IOM_CIR0_CIC1 (1 << 2)
+#define INCA_IP_IOM_CIR0_SG (1 << 1)
+#define INCA_IP_IOM_CIR0_BAS (1 << 0)
+
+/***Command/Indication Transmit 0***/
+#define INCA_IP_IOM_CIX0 ((volatile u32*)(INCA_IP_IOM+ 0x00B8))
+#define INCA_IP_IOM_CIX0_CODX0 (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define INCA_IP_IOM_CIX0_TBA2 (1 << 3)
+#define INCA_IP_IOM_CIX0_TBA1 (1 << 2)
+#define INCA_IP_IOM_CIX0_TBA0 (1 << 1)
+#define INCA_IP_IOM_CIX0_BAC (1 << 0)
+
+/***Command/Indication Receive 1***/
+#define INCA_IP_IOM_CIR1 ((volatile u32*)(INCA_IP_IOM+ 0x00BC))
+#define INCA_IP_IOM_CIR1_CODR1 (value) (((( 1 << 6) - 1) & (value)) << 2)
+
+/***Command/Indication Transmit 1***/
+#define INCA_IP_IOM_CIX1 ((volatile u32*)(INCA_IP_IOM+ 0x00BC))
+#define INCA_IP_IOM_CIX1_CODX1 (value) (((( 1 << 6) - 1) & (value)) << 2)
+#define INCA_IP_IOM_CIX1_CICW (1 << 1)
+#define INCA_IP_IOM_CIX1_CI1E (1 << 0)
+
+/***Controller Data Access Reg. (CH10)***/
+#define INCA_IP_IOM_CDA10 ((volatile u32*)(INCA_IP_IOM+ 0x0100))
+#define INCA_IP_IOM_CDA10_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Controller Data Access Reg. (CH11)***/
+#define INCA_IP_IOM_CDA11 ((volatile u32*)(INCA_IP_IOM+ 0x0104))
+#define INCA_IP_IOM_CDA11_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Controller Data Access Reg. (CH20)***/
+#define INCA_IP_IOM_CDA20 ((volatile u32*)(INCA_IP_IOM+ 0x0108))
+#define INCA_IP_IOM_CDA20_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Controller Data Access Reg. (CH21)***/
+#define INCA_IP_IOM_CDA21 ((volatile u32*)(INCA_IP_IOM+ 0x010C))
+#define INCA_IP_IOM_CDA21_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH10)***/
+#define INCA_IP_IOM_CDA_TSDP10 ((volatile u32*)(INCA_IP_IOM+ 0x0110))
+#define INCA_IP_IOM_CDA_TSDP10_DPS (1 << 7)
+#define INCA_IP_IOM_CDA_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH11)***/
+#define INCA_IP_IOM_CDA_TSDP11 ((volatile u32*)(INCA_IP_IOM+ 0x0114))
+#define INCA_IP_IOM_CDA_TSDP11_DPS (1 << 7)
+#define INCA_IP_IOM_CDA_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH20)***/
+#define INCA_IP_IOM_CDA_TSDP20 ((volatile u32*)(INCA_IP_IOM+ 0x0118))
+#define INCA_IP_IOM_CDA_TSDP20_DPS (1 << 7)
+#define INCA_IP_IOM_CDA_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH21)***/
+#define INCA_IP_IOM_CDA_TSDP21 ((volatile u32*)(INCA_IP_IOM+ 0x011C))
+#define INCA_IP_IOM_CDA_TSDP21_DPS (1 << 7)
+#define INCA_IP_IOM_CDA_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH10)***/
+#define INCA_IP_IOM_CO_TSDP10 ((volatile u32*)(INCA_IP_IOM+ 0x0120))
+#define INCA_IP_IOM_CO_TSDP10_DPS (1 << 7)
+#define INCA_IP_IOM_CO_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH11)***/
+#define INCA_IP_IOM_CO_TSDP11 ((volatile u32*)(INCA_IP_IOM+ 0x0124))
+#define INCA_IP_IOM_CO_TSDP11_DPS (1 << 7)
+#define INCA_IP_IOM_CO_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH20)***/
+#define INCA_IP_IOM_CO_TSDP20 ((volatile u32*)(INCA_IP_IOM+ 0x0128))
+#define INCA_IP_IOM_CO_TSDP20_DPS (1 << 7)
+#define INCA_IP_IOM_CO_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH21)***/
+#define INCA_IP_IOM_CO_TSDP21 ((volatile u32*)(INCA_IP_IOM+ 0x012C))
+#define INCA_IP_IOM_CO_TSDP21_DPS (1 << 7)
+#define INCA_IP_IOM_CO_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Ctrl. Reg. Contr. Data Access CH1x***/
+#define INCA_IP_IOM_CDA1_CR ((volatile u32*)(INCA_IP_IOM+ 0x0138))
+#define INCA_IP_IOM_CDA1_CR_EN_TBM (1 << 5)
+#define INCA_IP_IOM_CDA1_CR_EN_I1 (1 << 4)
+#define INCA_IP_IOM_CDA1_CR_EN_I0 (1 << 3)
+#define INCA_IP_IOM_CDA1_CR_EN_O1 (1 << 2)
+#define INCA_IP_IOM_CDA1_CR_EN_O0 (1 << 1)
+#define INCA_IP_IOM_CDA1_CR_SWAP (1 << 0)
+
+/***Ctrl. Reg. Contr. Data Access CH1x***/
+#define INCA_IP_IOM_CDA2_CR ((volatile u32*)(INCA_IP_IOM+ 0x013C))
+#define INCA_IP_IOM_CDA2_CR_EN_TBM (1 << 5)
+#define INCA_IP_IOM_CDA2_CR_EN_I1 (1 << 4)
+#define INCA_IP_IOM_CDA2_CR_EN_I0 (1 << 3)
+#define INCA_IP_IOM_CDA2_CR_EN_O1 (1 << 2)
+#define INCA_IP_IOM_CDA2_CR_EN_O0 (1 << 1)
+#define INCA_IP_IOM_CDA2_CR_SWAP (1 << 0)
+
+/***Control Register B-Channel Data***/
+#define INCA_IP_IOM_BCHA_CR ((volatile u32*)(INCA_IP_IOM+ 0x0144))
+#define INCA_IP_IOM_BCHA_CR_EN_BC2 (1 << 4)
+#define INCA_IP_IOM_BCHA_CR_EN_BC1 (1 << 3)
+
+/***Control Register B-Channel Data***/
+#define INCA_IP_IOM_BCHB_CR ((volatile u32*)(INCA_IP_IOM+ 0x0148))
+#define INCA_IP_IOM_BCHB_CR_EN_BC2 (1 << 4)
+#define INCA_IP_IOM_BCHB_CR_EN_BC1 (1 << 3)
+
+/***Control Reg. for HDLC and CI1 Data***/
+#define INCA_IP_IOM_DCI_CR ((volatile u32*)(INCA_IP_IOM+ 0x014C))
+#define INCA_IP_IOM_DCI_CR_DPS_CI1 (1 << 7)
+#define INCA_IP_IOM_DCI_CR_EN_CI1 (1 << 6)
+#define INCA_IP_IOM_DCI_CR_EN_D (1 << 5)
+
+/***Control Reg. for HDLC and CI1 Data***/
+#define INCA_IP_IOM_DCIC_CR ((volatile u32*)(INCA_IP_IOM+ 0x014C))
+#define INCA_IP_IOM_DCIC_CR_DPS_CI0 (1 << 7)
+#define INCA_IP_IOM_DCIC_CR_EN_CI0 (1 << 6)
+#define INCA_IP_IOM_DCIC_CR_DPS_D (1 << 5)
+
+/***Control Reg. Serial Data Strobe x***/
+#define INCA_IP_IOM_SDS_CR ((volatile u32*)(INCA_IP_IOM+ 0x0154))
+#define INCA_IP_IOM_SDS_CR_ENS_TSS (1 << 7)
+#define INCA_IP_IOM_SDS_CR_ENS_TSS_1 (1 << 6)
+#define INCA_IP_IOM_SDS_CR_ENS_TSS_3 (1 << 5)
+#define INCA_IP_IOM_SDS_CR_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Control Register IOM Data***/
+#define INCA_IP_IOM_IOM_CR ((volatile u32*)(INCA_IP_IOM+ 0x015C))
+#define INCA_IP_IOM_IOM_CR_SPU (1 << 7)
+#define INCA_IP_IOM_IOM_CR_CI_CS (1 << 5)
+#define INCA_IP_IOM_IOM_CR_TIC_DIS (1 << 4)
+#define INCA_IP_IOM_IOM_CR_EN_BCL (1 << 3)
+#define INCA_IP_IOM_IOM_CR_CLKM (1 << 2)
+#define INCA_IP_IOM_IOM_CR_Res (1 << 1)
+#define INCA_IP_IOM_IOM_CR_DIS_IOM (1 << 0)
+
+/***Synchronous Transfer Interrupt***/
+#define INCA_IP_IOM_STI ((volatile u32*)(INCA_IP_IOM+ 0x0160))
+#define INCA_IP_IOM_STI_STOV21 (1 << 7)
+#define INCA_IP_IOM_STI_STOV20 (1 << 6)
+#define INCA_IP_IOM_STI_STOV11 (1 << 5)
+#define INCA_IP_IOM_STI_STOV10 (1 << 4)
+#define INCA_IP_IOM_STI_STI21 (1 << 3)
+#define INCA_IP_IOM_STI_STI20 (1 << 2)
+#define INCA_IP_IOM_STI_STI11 (1 << 1)
+#define INCA_IP_IOM_STI_STI10 (1 << 0)
+
+/***Acknowledge Synchronous Transfer Interrupt***/
+#define INCA_IP_IOM_ASTI ((volatile u32*)(INCA_IP_IOM+ 0x0160))
+#define INCA_IP_IOM_ASTI_ACK21 (1 << 3)
+#define INCA_IP_IOM_ASTI_ACK20 (1 << 2)
+#define INCA_IP_IOM_ASTI_ACK11 (1 << 1)
+#define INCA_IP_IOM_ASTI_ACK10 (1 << 0)
+
+/***Mask Synchronous Transfer Interrupt***/
+#define INCA_IP_IOM_MSTI ((volatile u32*)(INCA_IP_IOM+ 0x0164))
+#define INCA_IP_IOM_MSTI_STOV21 (1 << 7)
+#define INCA_IP_IOM_MSTI_STOV20 (1 << 6)
+#define INCA_IP_IOM_MSTI_STOV11 (1 << 5)
+#define INCA_IP_IOM_MSTI_STOV10 (1 << 4)
+#define INCA_IP_IOM_MSTI_STI21 (1 << 3)
+#define INCA_IP_IOM_MSTI_STI20 (1 << 2)
+#define INCA_IP_IOM_MSTI_STI11 (1 << 1)
+#define INCA_IP_IOM_MSTI_STI10 (1 << 0)
+
+/***Configuration Register for Serial Data Strobes***/
+#define INCA_IP_IOM_SDS_CONF ((volatile u32*)(INCA_IP_IOM+ 0x0168))
+#define INCA_IP_IOM_SDS_CONF_SDS_BCL (1 << 0)
+
+/***Monitoring CDA Bits***/
+#define INCA_IP_IOM_MCDA ((volatile u32*)(INCA_IP_IOM+ 0x016C))
+#define INCA_IP_IOM_MCDA_MCDA21 (value) (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_IOM_MCDA_MCDA20 (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_IOM_MCDA_MCDA11 (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_IOM_MCDA_MCDA10 (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : ASC register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_ASC (0xB8000400)
+/***********************************************************************/
+
+
+/***ASC Port Input Select Register***/
+#define INCA_IP_ASC_ASC_PISEL ((volatile u32*)(INCA_IP_ASC+ 0x0004))
+#define INCA_IP_ASC_ASC_PISEL_RIS (1 << 0)
+
+/***ASC Control Register***/
+#define INCA_IP_ASC_ASC_CON ((volatile u32*)(INCA_IP_ASC+ 0x0010))
+#define INCA_IP_ASC_ASC_CON_R (1 << 15)
+#define INCA_IP_ASC_ASC_CON_LB (1 << 14)
+#define INCA_IP_ASC_ASC_CON_BRS (1 << 13)
+#define INCA_IP_ASC_ASC_CON_ODD (1 << 12)
+#define INCA_IP_ASC_ASC_CON_FDE (1 << 11)
+#define INCA_IP_ASC_ASC_CON_OE (1 << 10)
+#define INCA_IP_ASC_ASC_CON_FE (1 << 9)
+#define INCA_IP_ASC_ASC_CON_PE (1 << 8)
+#define INCA_IP_ASC_ASC_CON_OEN (1 << 7)
+#define INCA_IP_ASC_ASC_CON_FEN (1 << 6)
+#define INCA_IP_ASC_ASC_CON_PENRXDI (1 << 5)
+#define INCA_IP_ASC_ASC_CON_REN (1 << 4)
+#define INCA_IP_ASC_ASC_CON_STP (1 << 3)
+#define INCA_IP_ASC_ASC_CON_M (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***ASC Write Hardware Modified Control Register***/
+#define INCA_IP_ASC_ASC_WHBCON ((volatile u32*)(INCA_IP_ASC+ 0x0050))
+#define INCA_IP_ASC_ASC_WHBCON_SETOE (1 << 13)
+#define INCA_IP_ASC_ASC_WHBCON_SETFE (1 << 12)
+#define INCA_IP_ASC_ASC_WHBCON_SETPE (1 << 11)
+#define INCA_IP_ASC_ASC_WHBCON_CLROE (1 << 10)
+#define INCA_IP_ASC_ASC_WHBCON_CLRFE (1 << 9)
+#define INCA_IP_ASC_ASC_WHBCON_CLRPE (1 << 8)
+#define INCA_IP_ASC_ASC_WHBCON_SETREN (1 << 5)
+#define INCA_IP_ASC_ASC_WHBCON_CLRREN (1 << 4)
+
+/***ASC Baudrate Timer/Reload Register***/
+#define INCA_IP_ASC_ASC_BTR ((volatile u32*)(INCA_IP_ASC+ 0x0014))
+#define INCA_IP_ASC_ASC_BTR_BR_VALUE (value) (((( 1 << 13) - 1) & (value)) << 0)
+
+/***ASC Fractional Divider Register***/
+#define INCA_IP_ASC_ASC_FDV ((volatile u32*)(INCA_IP_ASC+ 0x0018))
+#define INCA_IP_ASC_ASC_FDV_FD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0)
+
+/***ASC IrDA Pulse Mode/Width Register***/
+#define INCA_IP_ASC_ASC_PMW ((volatile u32*)(INCA_IP_ASC+ 0x001C))
+#define INCA_IP_ASC_ASC_PMW_IRPW (1 << 8)
+#define INCA_IP_ASC_ASC_PMW_PW_VALUE (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***ASC Transmit Buffer Register***/
+#define INCA_IP_ASC_ASC_TBUF ((volatile u32*)(INCA_IP_ASC+ 0x0020))
+#define INCA_IP_ASC_ASC_TBUF_TD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0)
+
+/***ASC Receive Buffer Register***/
+#define INCA_IP_ASC_ASC_RBUF ((volatile u32*)(INCA_IP_ASC+ 0x0024))
+#define INCA_IP_ASC_ASC_RBUF_RD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0)
+
+/***ASC Autobaud Control Register***/
+#define INCA_IP_ASC_ASC_ABCON ((volatile u32*)(INCA_IP_ASC+ 0x0030))
+#define INCA_IP_ASC_ASC_ABCON_RXINV (1 << 11)
+#define INCA_IP_ASC_ASC_ABCON_TXINV (1 << 10)
+#define INCA_IP_ASC_ASC_ABCON_ABEM (value) (((( 1 << 2) - 1) & (value)) << 8)
+#define INCA_IP_ASC_ASC_ABCON_FCDETEN (1 << 4)
+#define INCA_IP_ASC_ASC_ABCON_ABDETEN (1 << 3)
+#define INCA_IP_ASC_ASC_ABCON_ABSTEN (1 << 2)
+#define INCA_IP_ASC_ASC_ABCON_AUREN (1 << 1)
+#define INCA_IP_ASC_ASC_ABCON_ABEN (1 << 0)
+
+/***Receive FIFO Control Register***/
+#define INCA_IP_ASC_RXFCON ((volatile u32*)(INCA_IP_ASC+ 0x0040))
+#define INCA_IP_ASC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_ASC_RXFCON_RXTMEN (1 << 2)
+#define INCA_IP_ASC_RXFCON_RXFFLU (1 << 1)
+#define INCA_IP_ASC_RXFCON_RXFEN (1 << 0)
+
+/***Transmit FIFO Control Register***/
+#define INCA_IP_ASC_TXFCON ((volatile u32*)(INCA_IP_ASC+ 0x0044))
+#define INCA_IP_ASC_TXFCON_TXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_ASC_TXFCON_TXTMEN (1 << 2)
+#define INCA_IP_ASC_TXFCON_TXFFLU (1 << 1)
+#define INCA_IP_ASC_TXFCON_TXFEN (1 << 0)
+
+/***FIFO Status Register***/
+#define INCA_IP_ASC_FSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0048))
+#define INCA_IP_ASC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8)
+#define INCA_IP_ASC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0)
+
+/***ASC Write HW Modified Autobaud Control Register***/
+#define INCA_IP_ASC_ASC_WHBABCON ((volatile u32*)(INCA_IP_ASC+ 0x0054))
+#define INCA_IP_ASC_ASC_WHBABCON_SETABEN (1 << 1)
+#define INCA_IP_ASC_ASC_WHBABCON_CLRABEN (1 << 0)
+
+/***ASC Autobaud Status Register***/
+#define INCA_IP_ASC_ASC_ABSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0034))
+#define INCA_IP_ASC_ASC_ABSTAT_DETWAIT (1 << 4)
+#define INCA_IP_ASC_ASC_ABSTAT_SCCDET (1 << 3)
+#define INCA_IP_ASC_ASC_ABSTAT_SCSDET (1 << 2)
+#define INCA_IP_ASC_ASC_ABSTAT_FCCDET (1 << 1)
+#define INCA_IP_ASC_ASC_ABSTAT_FCSDET (1 << 0)
+
+/***ASC Write HW Modified Autobaud Status Register***/
+#define INCA_IP_ASC_ASC_WHBABSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0058))
+#define INCA_IP_ASC_ASC_WHBABSTAT_SETDETWAIT (1 << 9)
+#define INCA_IP_ASC_ASC_WHBABSTAT_CLRDETWAIT (1 << 8)
+#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCCDET (1 << 7)
+#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCCDET (1 << 6)
+#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCSDET (1 << 5)
+#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCSDET (1 << 4)
+#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCCDET (1 << 3)
+#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCCDET (1 << 2)
+#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCSDET (1 << 1)
+#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCSDET (1 << 0)
+
+/***ASC Clock Control Register***/
+#define INCA_IP_ASC_ASC_CLC ((volatile u32*)(INCA_IP_ASC+ 0x0000))
+#define INCA_IP_ASC_ASC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_ASC_ASC_CLC_DISS (1 << 1)
+#define INCA_IP_ASC_ASC_CLC_DISR (1 << 0)
+
+/***********************************************************************/
+/* Module : DMA register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_DMA (0xBF108000)
+/***********************************************************************/
+
+
+/***DMA RX Channel 0 Command Register***/
+#define INCA_IP_DMA_DMA_RXCCR0 ((volatile u32*)(INCA_IP_DMA+ 0x0800))
+#define INCA_IP_DMA_DMA_RXCCR0_LBE (1 << 31)
+#define INCA_IP_DMA_DMA_RXCCR0_HPEN (1 << 30)
+#define INCA_IP_DMA_DMA_RXCCR0_INIT (1 << 2)
+#define INCA_IP_DMA_DMA_RXCCR0_OFF (1 << 1)
+#define INCA_IP_DMA_DMA_RXCCR0_HR (1 << 0)
+
+/***DMA RX Channel 1 Command Register***/
+#define INCA_IP_DMA_DMA_RXCCR1 ((volatile u32*)(INCA_IP_DMA+ 0x0804))
+#define INCA_IP_DMA_DMA_RXCCR1_LBE (1 << 31)
+#define INCA_IP_DMA_DMA_RXCCR1_HPEN (1 << 30)
+#define INCA_IP_DMA_DMA_RXCCR1_INIT (1 << 2)
+#define INCA_IP_DMA_DMA_RXCCR1_OFF (1 << 1)
+#define INCA_IP_DMA_DMA_RXCCR1_HR (1 << 0)
+
+/***DMA Receive Interrupt Status Register***/
+#define INCA_IP_DMA_DMA_RXISR ((volatile u32*)(INCA_IP_DMA+ 0x0808))
+#define INCA_IP_DMA_DMA_RXISR_RDERRx (value) (((( 1 << 2) - 1) & (value)) << 8)
+#define INCA_IP_DMA_DMA_RXISR_CMDCPTx (value) (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_DMA_DMA_RXISR_EOPx (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_DMA_DMA_RXISR_CPTx (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_DMA_DMA_RXISR_HLDx (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***DMA Receive Interrupt Mask Register***/
+#define INCA_IP_DMA_DMA_RXIMR ((volatile u32*)(INCA_IP_DMA+ 0x080C))
+#define INCA_IP_DMA_DMA_RXIMR_RDERRx (value) (((( 1 << 2) - 1) & (value)) << 8)
+#define INCA_IP_DMA_DMA_RXIMR_CMDCPTx (value) (((( 1 << 2) - 1) & (value)) << 6)
+#define INCA_IP_DMA_DMA_RXIMR_EOPx (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_DMA_DMA_RXIMR_CPTx (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_DMA_DMA_RXIMR_HLDx (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***DMA First Receive Descriptor Addr. for Rx Channel 0
+***/
+#define INCA_IP_DMA_DMA_RXFRDA0 ((volatile u32*)(INCA_IP_DMA+ 0x0810))
+#define INCA_IP_DMA_DMA_RXFRDA0_RXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0)
+
+/***DMA First Receive Descriptor Addr. for Rx Channel 1
+***/
+#define INCA_IP_DMA_DMA_RXFRDA1 ((volatile u32*)(INCA_IP_DMA+ 0x0814))
+#define INCA_IP_DMA_DMA_RXFRDA1_RXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0)
+
+/***DMA Receive Channel Polling Time***/
+#define INCA_IP_DMA_DMA_RXPOLL ((volatile u32*)(INCA_IP_DMA+ 0x0818))
+#define INCA_IP_DMA_DMA_RXPOLL_BSZ1 (value) (((( 1 << 2) - 1) & (value)) << 30)
+#define INCA_IP_DMA_DMA_RXPOLL_BSZ0 (value) (((( 1 << 2) - 1) & (value)) << 28)
+#define INCA_IP_DMA_DMA_RXPOLL_RXPOLLTIME (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***DMA TX Channel 0 Command Register (Voice Port)***/
+#define INCA_IP_DMA_DMA_TXCCR0 ((volatile u32*)(INCA_IP_DMA+ 0x0880))
+#define INCA_IP_DMA_DMA_TXCCR0_LBE (1 << 31)
+#define INCA_IP_DMA_DMA_TXCCR0_HPEN (1 << 30)
+#define INCA_IP_DMA_DMA_TXCCR0_HR (1 << 2)
+#define INCA_IP_DMA_DMA_TXCCR0_OFF (1 << 1)
+#define INCA_IP_DMA_DMA_TXCCR0_INIT (1 << 0)
+
+/***DMA TX Channel 1 Command Register (Mangmt Port)***/
+#define INCA_IP_DMA_DMA_TXCCR1 ((volatile u32*)(INCA_IP_DMA+ 0x0884))
+#define INCA_IP_DMA_DMA_TXCCR1_LBE (1 << 31)
+#define INCA_IP_DMA_DMA_TXCCR1_HPEN (1 << 30)
+#define INCA_IP_DMA_DMA_TXCCR1_HR (1 << 2)
+#define INCA_IP_DMA_DMA_TXCCR1_OFF (1 << 1)
+#define INCA_IP_DMA_DMA_TXCCR1_INIT (1 << 0)
+
+/***DMA TX Channel 2 Command Register (SSC Port)***/
+#define INCA_IP_DMA_DMA_TXCCR2 ((volatile u32*)(INCA_IP_DMA+ 0x0888))
+#define INCA_IP_DMA_DMA_TXCCR2_LBE (1 << 31)
+#define INCA_IP_DMA_DMA_TXCCR2_HPEN (1 << 30)
+#define INCA_IP_DMA_DMA_TXCCR2_HBF (1 << 29)
+#define INCA_IP_DMA_DMA_TXCCR2_HR (1 << 2)
+#define INCA_IP_DMA_DMA_TXCCR2_OFF (1 << 1)
+#define INCA_IP_DMA_DMA_TXCCR2_INIT (1 << 0)
+
+/***DMA First Receive Descriptor Addr. for Tx Channel 0
+***/
+#define INCA_IP_DMA_DMA_TXFRDA0 ((volatile u32*)(INCA_IP_DMA+ 0x08A0))
+#define INCA_IP_DMA_DMA_TXFRDA0_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0)
+
+/***DMA First Receive Descriptor Addr. for Tx Channel 1
+***/
+#define INCA_IP_DMA_DMA_TXFRDA1 ((volatile u32*)(INCA_IP_DMA+ 0x08A4))
+#define INCA_IP_DMA_DMA_TXFRDA1_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0)
+
+/***DMA First Receive Descriptor Addr. for Tx Channel 2
+***/
+#define INCA_IP_DMA_DMA_TXFRDA2 ((volatile u32*)(INCA_IP_DMA+ 0x08A8))
+#define INCA_IP_DMA_DMA_TXFRDA2_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0)
+
+/***DMA Transmit Channel Arbitration Register***/
+#define INCA_IP_DMA_DMA_TXWGT ((volatile u32*)(INCA_IP_DMA+ 0x08C0))
+#define INCA_IP_DMA_DMA_TXWGT_TX2PR (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define INCA_IP_DMA_DMA_TXWGT_TX1PRI (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define INCA_IP_DMA_DMA_TXWGT_TX0PRI (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***DMA Transmit Channel Polling Time***/
+#define INCA_IP_DMA_DMA_TXPOLL ((volatile u32*)(INCA_IP_DMA+ 0x08C4))
+#define INCA_IP_DMA_DMA_TXPOLL_BSZ2 (value) (((( 1 << 2) - 1) & (value)) << 30)
+#define INCA_IP_DMA_DMA_TXPOLL_BSZ1 (value) (((( 1 << 2) - 1) & (value)) << 28)
+#define INCA_IP_DMA_DMA_TXPOLL_BSZ0 (value) (((( 1 << 2) - 1) & (value)) << 26)
+#define INCA_IP_DMA_DMA_TXPOLL_TXPOLLTIME (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***DMA Transmit Interrupt Status Register***/
+#define INCA_IP_DMA_DMA_TXISR ((volatile u32*)(INCA_IP_DMA+ 0x08C8))
+#define INCA_IP_DMA_DMA_TXISR_RDERRx (value) (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_DMA_DMA_TXISR_HLDx (value) (((( 1 << 3) - 1) & (value)) << 9)
+#define INCA_IP_DMA_DMA_TXISR_CPTx (value) (((( 1 << 3) - 1) & (value)) << 6)
+#define INCA_IP_DMA_DMA_TXISR_EOPx (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_DMA_DMA_TXISR_CMDCPTx (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***DMA Transmit Interrupt Mask Register***/
+#define INCA_IP_DMA_DMA_TXIMR ((volatile u32*)(INCA_IP_DMA+ 0x08CC))
+#define INCA_IP_DMA_DMA_TXIMR_RDERRx (value) (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_DMA_DMA_TXIMR_HLDx (value) (((( 1 << 3) - 1) & (value)) << 9)
+#define INCA_IP_DMA_DMA_TXIMR_CPTx (value) (((( 1 << 3) - 1) & (value)) << 6)
+#define INCA_IP_DMA_DMA_TXIMR_EOPx (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define INCA_IP_DMA_DMA_TXIMR_CMDCPTx (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : Debug register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_Debug (0xBF106000)
+/***********************************************************************/
+
+
+/***MCD Break Bus Switch Register***/
+#define INCA_IP_Debug_MCD_BBS ((volatile u32*)(INCA_IP_Debug+ 0x0000))
+#define INCA_IP_Debug_MCD_BBS_BTP1 (1 << 19)
+#define INCA_IP_Debug_MCD_BBS_BTP0 (1 << 18)
+#define INCA_IP_Debug_MCD_BBS_BSP1 (1 << 17)
+#define INCA_IP_Debug_MCD_BBS_BSP0 (1 << 16)
+#define INCA_IP_Debug_MCD_BBS_BT5EN (1 << 15)
+#define INCA_IP_Debug_MCD_BBS_BT4EN (1 << 14)
+#define INCA_IP_Debug_MCD_BBS_BT5 (1 << 13)
+#define INCA_IP_Debug_MCD_BBS_BT4 (1 << 12)
+#define INCA_IP_Debug_MCD_BBS_BS5EN (1 << 7)
+#define INCA_IP_Debug_MCD_BBS_BS4EN (1 << 6)
+#define INCA_IP_Debug_MCD_BBS_BS5 (1 << 5)
+#define INCA_IP_Debug_MCD_BBS_BS4 (1 << 4)
+
+/***MCD Multiplexer Control Register***/
+#define INCA_IP_Debug_MCD_MCR ((volatile u32*)(INCA_IP_Debug+ 0x0008))
+#define INCA_IP_Debug_MCD_MCR_MUX5 (1 << 4)
+#define INCA_IP_Debug_MCD_MCR_MUX4 (1 << 3)
+#define INCA_IP_Debug_MCD_MCR_MUX1 (1 << 0)
+
+/***********************************************************************/
+/* Module : TSF register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_TSF (0xB8000900)
+/***********************************************************************/
+
+
+/***TSF Configuration Register (0000H)***/
+#define INCA_IP_TSF_TSF_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0000))
+#define INCA_IP_TSF_TSF_CONF_PWMEN (1 << 2)
+#define INCA_IP_TSF_TSF_CONF_LEDEN (1 << 1)
+#define INCA_IP_TSF_TSF_CONF_KEYEN (1 << 0)
+
+/***Key scan Configuration Register (0004H)***/
+#define INCA_IP_TSF_KEY_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0004))
+#define INCA_IP_TSF_KEY_CONF_SL (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Scan Register Line 0 and 1 (0008H)***/
+#define INCA_IP_TSF_SREG01 ((volatile u32*)(INCA_IP_TSF+ 0x0008))
+#define INCA_IP_TSF_SREG01_RES1x (value) (((( 1 << 12) - 1) & (value)) << 16)
+#define INCA_IP_TSF_SREG01_RES0x (value) (((( 1 << 13) - 1) & (value)) << 0)
+
+/***Scan Register Line 2 and 3 (000CH)***/
+#define INCA_IP_TSF_SREG23 ((volatile u32*)(INCA_IP_TSF+ 0x000C))
+#define INCA_IP_TSF_SREG23_RES3x (value) (((( 1 << 10) - 1) & (value)) << 16)
+#define INCA_IP_TSF_SREG23_RES2x (value) (((( 1 << 11) - 1) & (value)) << 0)
+
+/***Scan Register Line 4, 5 and 6 (0010H)***/
+#define INCA_IP_TSF_SREG456 ((volatile u32*)(INCA_IP_TSF+ 0x0010))
+#define INCA_IP_TSF_SREG456_RES6x (value) (((( 1 << 7) - 1) & (value)) << 24)
+#define INCA_IP_TSF_SREG456_RES5x (value) (((( 1 << 8) - 1) & (value)) << 16)
+#define INCA_IP_TSF_SREG456_RES4x (value) (((( 1 << 9) - 1) & (value)) << 0)
+
+/***Scan Register Line 7 to 12 (0014H)***/
+#define INCA_IP_TSF_SREG7to12 ((volatile u32*)(INCA_IP_TSF+ 0x0014))
+#define INCA_IP_TSF_SREG7to12_RES12x (1 << 28)
+#define INCA_IP_TSF_SREG7to12_RES11x (value) (((( 1 << 2) - 1) & (value)) << 24)
+#define INCA_IP_TSF_SREG7to12_RES10x (value) (((( 1 << 3) - 1) & (value)) << 20)
+#define INCA_IP_TSF_SREG7to12_RES9x (value) (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_TSF_SREG7to12_RES8x (value) (((( 1 << 5) - 1) & (value)) << 8)
+#define INCA_IP_TSF_SREG7to12_RES7x (value) (((( 1 << 6) - 1) & (value)) << 0)
+
+/***LEDMUX Configuration Register (0018H)***/
+#define INCA_IP_TSF_LEDMUX_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0018))
+#define INCA_IP_TSF_LEDMUX_CONF_ETL1 (1 << 25)
+#define INCA_IP_TSF_LEDMUX_CONF_ESTA1 (1 << 24)
+#define INCA_IP_TSF_LEDMUX_CONF_EDPX1 (1 << 23)
+#define INCA_IP_TSF_LEDMUX_CONF_EACT1 (1 << 22)
+#define INCA_IP_TSF_LEDMUX_CONF_ESPD1 (1 << 21)
+#define INCA_IP_TSF_LEDMUX_CONF_ETL0 (1 << 20)
+#define INCA_IP_TSF_LEDMUX_CONF_ESTA0 (1 << 19)
+#define INCA_IP_TSF_LEDMUX_CONF_EDPX0 (1 << 18)
+#define INCA_IP_TSF_LEDMUX_CONF_EACT0 (1 << 17)
+#define INCA_IP_TSF_LEDMUX_CONF_ESPD0 (1 << 16)
+#define INCA_IP_TSF_LEDMUX_CONF_INV (1 << 1)
+#define INCA_IP_TSF_LEDMUX_CONF_NCOL (1 << 0)
+
+/***LED Register (001CH)***/
+#define INCA_IP_TSF_LED_REG ((volatile u32*)(INCA_IP_TSF+ 0x001C))
+#define INCA_IP_TSF_LED_REG_Lxy (value) (((( 1 << 24) - 1) & (value)) << 0)
+
+/***Pulse Width Modulator 1 and 2 Register (0020H)***/
+#define INCA_IP_TSF_PWM12 ((volatile u32*)(INCA_IP_TSF+ 0x0020))
+#define INCA_IP_TSF_PWM12_PW2PW1 (value) (((( 1 << NaN) - 1) & (value)) << NaN)
+
+/***********************************************************************/
+/* Module : Ports register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_Ports (0xB8000A00)
+/***********************************************************************/
+
+
+/***Port 1 Data Output Register (0020H)***/
+#define INCA_IP_Ports_P1_OUT ((volatile u32*)(INCA_IP_Ports+ 0x0020))
+#define INCA_IP_Ports_P1_OUT_P(value) (1 << value)
+
+
+/***Port 2 Data Output Register (0040H)***/
+#define INCA_IP_Ports_P2_OUT ((volatile u32*)(INCA_IP_Ports+ 0x0040))
+#define INCA_IP_Ports_P2_OUT_P(value) (1 << value)
+
+
+/***Port 1 Data Input Register (0024H)***/
+#define INCA_IP_Ports_P1_IN ((volatile u32*)(INCA_IP_Ports+ 0x0024))
+#define INCA_IP_Ports_P1_IN_P(value) (1 << value)
+
+
+/***Port 2 Data Input Register (0044H)***/
+#define INCA_IP_Ports_P2_IN ((volatile u32*)(INCA_IP_Ports+ 0x0044))
+#define INCA_IP_Ports_P2_IN_P(value) (1 << value)
+
+
+/***Port 1 Direction Register (0028H)***/
+#define INCA_IP_Ports_P1_DIR ((volatile u32*)(INCA_IP_Ports+ 0x0028))
+#define INCA_IP_Ports_P1_DIR_Port1P(value) (1 << value)
+
+#define INCA_IP_Ports_P1_DIR_Port2Pn (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***Port 2 Direction Register (0048H)***/
+#define INCA_IP_Ports_P2_DIR ((volatile u32*)(INCA_IP_Ports+ 0x0048))
+#define INCA_IP_Ports_P2_DIR_Port1P(value) (1 << value)
+
+#define INCA_IP_Ports_P2_DIR_Port2Pn (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***Port 0 Alternate Function Select Register 0 (000C H)
+***/
+#define INCA_IP_Ports_P0_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x000C))
+#define INCA_IP_Ports_P0_ALTSEL_Port0P(value) (1 << value)
+
+
+/***Port 1 Alternate Function Select Register 0 (002C H)
+***/
+#define INCA_IP_Ports_P1_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x002C))
+#define INCA_IP_Ports_P1_ALTSEL_Port1P(value) (1 << value)
+
+#define INCA_IP_Ports_P1_ALTSEL_Port2P(value) (1 << value)
+
+
+/***Port 2 Alternate Function Select Register 0 (004C H)
+***/
+#define INCA_IP_Ports_P2_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x004C))
+#define INCA_IP_Ports_P2_ALTSEL_Port1P(value) (1 << value)
+
+#define INCA_IP_Ports_P2_ALTSEL_Port2P(value) (1 << value)
+
+
+/***Port 0 Input Schmitt-Trigger Off Register (0010 H)
+***/
+#define INCA_IP_Ports_P0_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0010))
+#define INCA_IP_Ports_P0_STOFF_Port0P(value) (1 << value)
+
+
+/***Port 1 Input Schmitt-Trigger Off Register (0030 H)
+***/
+#define INCA_IP_Ports_P1_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0030))
+#define INCA_IP_Ports_P1_STOFF_Port1P(value) (1 << value)
+
+#define INCA_IP_Ports_P1_STOFF_Port2P(value) (1 << value)
+
+
+/***Port 2 Input Schmitt-Trigger Off Register (0050 H)
+***/
+#define INCA_IP_Ports_P2_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0050))
+#define INCA_IP_Ports_P2_STOFF_Port1P(value) (1 << value)
+
+#define INCA_IP_Ports_P2_STOFF_Port2P(value) (1 << value)
+
+
+/***Port 2 Open Drain Control Register (0054H)***/
+#define INCA_IP_Ports_P2_OD ((volatile u32*)(INCA_IP_Ports+ 0x0054))
+#define INCA_IP_Ports_P2_OD_Port2P(value) (1 << value)
+
+
+/***Port 0 Pull Up Device Enable Register (0018 H)***/
+#define INCA_IP_Ports_P0_PUDEN ((volatile u32*)(INCA_IP_Ports+ 0x0018))
+#define INCA_IP_Ports_P0_PUDEN_Port0P(value) (1 << value)
+
+
+/***Port 2 Pull Up Device Enable Register (0058 H)***/
+#define INCA_IP_Ports_P2_PUDEN ((volatile u32*)(INCA_IP_Ports+ 0x0058))
+#define INCA_IP_Ports_P2_PUDEN_Port2P(value) (1 << value)
+
+#define INCA_IP_Ports_P2_PUDEN_Port2P(value) (1 << value)
+
+
+/***Port 0 Pull Up/Pull Down Select Register (001C H)***/
+#define INCA_IP_Ports_P0_PUDSEL ((volatile u32*)(INCA_IP_Ports+ 0x001C))
+#define INCA_IP_Ports_P0_PUDSEL_Port0P(value) (1 << value)
+
+
+/***Port 2 Pull Up/Pull Down Select Register (005C H)***/
+#define INCA_IP_Ports_P2_PUDSEL ((volatile u32*)(INCA_IP_Ports+ 0x005C))
+#define INCA_IP_Ports_P2_PUDSEL_Port2P(value) (1 << value)
+
+#define INCA_IP_Ports_P2_PUDSEL_Port2P(value) (1 << value)
+
+
+/***********************************************************************/
+/* Module : DES/3DES register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_DES_3DES (0xB8000800)
+/***********************************************************************/
+
+
+/***DES Input Data High Register***/
+#define INCA_IP_DES_3DES_DES_IHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0000))
+#define INCA_IP_DES_3DES_DES_IHR_IH(value) (1 << value)
+
+
+/***DES Input Data Low Register***/
+#define INCA_IP_DES_3DES_DES_ILR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0004))
+#define INCA_IP_DES_3DES_DES_ILR_IL(value) (1 << value)
+
+
+/***DES Key #1 High Register***/
+#define INCA_IP_DES_3DES_DES_K1HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0008))
+#define INCA_IP_DES_3DES_DES_K1HR_K1H(value) (1 << value)
+
+
+/***DES Key #1 Low Register***/
+#define INCA_IP_DES_3DES_DES_K1LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x000C))
+#define INCA_IP_DES_3DES_DES_K1LR_K1L(value) (1 << value)
+
+
+/***DES Key #2 High Register***/
+#define INCA_IP_DES_3DES_DES_K2HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0010))
+#define INCA_IP_DES_3DES_DES_K2HR_K2H(value) (1 << value)
+
+
+/***DES Key #2 Low Register***/
+#define INCA_IP_DES_3DES_DES_K2LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0014))
+#define INCA_IP_DES_3DES_DES_K2LR_K2L(value) (1 << value)
+
+
+/***DES Key #3 High Register***/
+#define INCA_IP_DES_3DES_DES_K3HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0018))
+#define INCA_IP_DES_3DES_DES_K3HR_K3H(value) (1 << value)
+
+
+/***DES Key #3 Low Register***/
+#define INCA_IP_DES_3DES_DES_K3LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x001C))
+#define INCA_IP_DES_3DES_DES_K3LR_K3L(value) (1 << value)
+
+
+/***DES Initialization Vector High Register***/
+#define INCA_IP_DES_3DES_DES_IVHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0020))
+#define INCA_IP_DES_3DES_DES_IVHR_IVH(value) (1 << value)
+
+
+/***DES Initialization Vector Low Register***/
+#define INCA_IP_DES_3DES_DES_IVLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0024))
+#define INCA_IP_DES_3DES_DES_IVLR_IVL(value) (1 << value)
+
+
+/***DES Control Register***/
+#define INCA_IP_DES_3DES_DES_CONTROLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0028))
+#define INCA_IP_DES_3DES_DES_CONTROLR_KRE (1 << 31)
+#define INCA_IP_DES_3DES_DES_CONTROLR_DAU (1 << 16)
+#define INCA_IP_DES_3DES_DES_CONTROLR_F(value) (1 << value)
+
+#define INCA_IP_DES_3DES_DES_CONTROLR_O(value) (1 << value)
+
+#define INCA_IP_DES_3DES_DES_CONTROLR_GO (1 << 8)
+#define INCA_IP_DES_3DES_DES_CONTROLR_STP (1 << 7)
+#define INCA_IP_DES_3DES_DES_CONTROLR_IEN (1 << 6)
+#define INCA_IP_DES_3DES_DES_CONTROLR_BUS (1 << 5)
+#define INCA_IP_DES_3DES_DES_CONTROLR_SM (1 << 4)
+#define INCA_IP_DES_3DES_DES_CONTROLR_E_D (1 << 3)
+#define INCA_IP_DES_3DES_DES_CONTROLR_M(value) (1 << value)
+
+
+/***DES Output Data High Register***/
+#define INCA_IP_DES_3DES_DES_OHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x002C))
+#define INCA_IP_DES_3DES_DES_OHR_OH(value) (1 << value)
+
+
+/***DES Output Data Low Register***/
+#define INCA_IP_DES_3DES_DES_OLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0030))
+#define INCA_IP_DES_3DES_DES_OLR_OL(value) (1 << value)
+
+
+/***********************************************************************/
+/* Module : AES register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_AES (0xB8000880)
+/***********************************************************************/
+
+
+/***AES Input Data 3 Register***/
+#define INCA_IP_AES_AES_ID3R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_ID3R_I(value) (1 << value)
+
+
+/***AES Input Data 2 Register***/
+#define INCA_IP_AES_AES_ID2R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_ID2R_I(value) (1 << value)
+
+
+/***AES Input Data 1 Register***/
+#define INCA_IP_AES_AES_ID1R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_ID1R_I(value) (1 << value)
+
+
+/***AES Input Data 0 Register***/
+#define INCA_IP_AES_AES_ID0R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_ID0R_I(value) (1 << value)
+
+
+/***AES Output Data 3 Register***/
+#define INCA_IP_AES_AES_OD3R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_OD3R_O(value) (1 << value)
+
+
+/***AES Output Data 2 Register***/
+#define INCA_IP_AES_AES_OD2R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_OD2R_O(value) (1 << value)
+
+
+/***AES Output Data 1 Register***/
+#define INCA_IP_AES_AES_OD1R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_OD1R_O(value) (1 << value)
+
+
+/***AES Output Data 0 Register***/
+#define INCA_IP_AES_AES_OD0R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_OD0R_O(value) (1 << value)
+
+
+/***AES Key 7 Register***/
+#define INCA_IP_AES_AES_K7R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K7R_K(value) (1 << value)
+
+
+/***AES Key 6 Register***/
+#define INCA_IP_AES_AES_K6R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K6R_K(value) (1 << value)
+
+
+/***AES Key 5 Register***/
+#define INCA_IP_AES_AES_K5R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K5R_K(value) (1 << value)
+
+
+/***AES Key 4 Register***/
+#define INCA_IP_AES_AES_K4R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K4R_K(value) (1 << value)
+
+
+/***AES Key 3 Register***/
+#define INCA_IP_AES_AES_K3R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K3R_K(value) (1 << value)
+
+
+/***AES Key 2 Register***/
+#define INCA_IP_AES_AES_K2R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K2R_K(value) (1 << value)
+
+
+/***AES Key 1 Register***/
+#define INCA_IP_AES_AES_K1R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K1R_K(value) (1 << value)
+
+
+/***AES Key 0 Register***/
+#define INCA_IP_AES_AES_K0R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_K0R_K(value) (1 << value)
+
+
+/***AES Initialization Vector 3 Register***/
+#define INCA_IP_AES_AES_IV3R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_IV3R_IV(value) (1 << value)
+
+
+/***AES Initialization Vector 2 Register***/
+#define INCA_IP_AES_AES_IV2R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_IV2R_IV(value) (1 << value)
+
+
+/***AES Initialization Vector 1 Register***/
+#define INCA_IP_AES_AES_IV1R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_IV1R_IV(value) (1 << value)
+
+
+/***AES Initialization Vector 0 Register***/
+#define INCA_IP_AES_AES_IV0R ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_IV0R_IV (value) (((( 1 << 32) - 1) &(value)) << 0)
+
+/***AES Control Register***/
+#define INCA_IP_AES_AES_CONTROLR ((volatile u32*)(INCA_IP_AES+ 0x0000))
+#define INCA_IP_AES_AES_CONTROLR_KRE (1 << 31)
+#define INCA_IP_AES_AES_CONTROLR_DAU (1 << 16)
+#define INCA_IP_AES_AES_CONTROLR_PNK (1 << 15)
+#define INCA_IP_AES_AES_CONTROLR_F(value) (1 << value)
+
+#define INCA_IP_AES_AES_CONTROLR_O(value) (1 << value)
+
+#define INCA_IP_AES_AES_CONTROLR_GO (1 << 8)
+#define INCA_IP_AES_AES_CONTROLR_STP (1 << 7)
+#define INCA_IP_AES_AES_CONTROLR_IEN (1 << 6)
+#define INCA_IP_AES_AES_CONTROLR_BUS (1 << 5)
+#define INCA_IP_AES_AES_CONTROLR_SM (1 << 4)
+#define INCA_IP_AES_AES_CONTROLR_E_D (1 << 3)
+#define INCA_IP_AES_AES_CONTROLR_KV (1 << 2)
+#define INCA_IP_AES_AES_CONTROLR_K(value) (1 << value)
+
+
+/***********************************************************************/
+/* Module : I²C register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_IIC (0xB8000700)
+/***********************************************************************/
+
+
+/***I²C Port Input Select Register***/
+#define INCA_IP_IIC_IIC_PISEL ((volatile u32*)(INCA_IP_IIC+ 0x0004))
+#define INCA_IP_IIC_IIC_PISEL_SDAIS(value) (1 << value)
+
+#define INCA_IP_IIC_IIC_PISEL_SCLIS(value) (1 << value)
+
+
+/***I²C Clock Control Register***/
+#define INCA_IP_IIC_IIC_CLC ((volatile u32*)(INCA_IP_IIC+ 0x0000))
+#define INCA_IP_IIC_IIC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_CLC_DISS (1 << 1)
+#define INCA_IP_IIC_IIC_CLC_DISR (1 << 0)
+
+/***I²C System Control Register***/
+#define INCA_IP_IIC_IIC_SYSCON_0 ((volatile u32*)(INCA_IP_IIC+ 0x0010))
+#define INCA_IP_IIC_IIC_SYSCON_0_WMEN (1 << 31)
+#define INCA_IP_IIC_IIC_SYSCON_0_CI (value) (((( 1 << 2) - 1) & (value)) << 26)
+#define INCA_IP_IIC_IIC_SYSCON_0_STP (1 << 25)
+#define INCA_IP_IIC_IIC_SYSCON_0_IGE (1 << 24)
+#define INCA_IP_IIC_IIC_SYSCON_0_TRX (1 << 23)
+#define INCA_IP_IIC_IIC_SYSCON_0_INT (1 << 22)
+#define INCA_IP_IIC_IIC_SYSCON_0_ACKDIS (1 << 21)
+#define INCA_IP_IIC_IIC_SYSCON_0_BUM (1 << 20)
+#define INCA_IP_IIC_IIC_SYSCON_0_MOD (value) (((( 1 << 2) - 1) & (value)) << 18)
+#define INCA_IP_IIC_IIC_SYSCON_0_RSC (1 << 17)
+#define INCA_IP_IIC_IIC_SYSCON_0_M10 (1 << 16)
+#define INCA_IP_IIC_IIC_SYSCON_0_RMEN (1 << 15)
+#define INCA_IP_IIC_IIC_SYSCON_0_CO (value) (((( 1 << 3) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_SYSCON_0_IRQE (1 << 7)
+#define INCA_IP_IIC_IIC_SYSCON_0_IRQP (1 << 6)
+#define INCA_IP_IIC_IIC_SYSCON_0_IRQD (1 << 5)
+#define INCA_IP_IIC_IIC_SYSCON_0_BB (1 << 4)
+#define INCA_IP_IIC_IIC_SYSCON_0_LRB (1 << 3)
+#define INCA_IP_IIC_IIC_SYSCON_0_SLA (1 << 2)
+#define INCA_IP_IIC_IIC_SYSCON_0_AL (1 << 1)
+#define INCA_IP_IIC_IIC_SYSCON_0_ADR (1 << 0)
+
+/***I²C System Control Register***/
+#define INCA_IP_IIC_IIC_SYSCON_1 ((volatile u32*)(INCA_IP_IIC+ 0x0010))
+#define INCA_IP_IIC_IIC_SYSCON_1_RM (value) (((( 1 << 8) - 1) & (value)) << 24)
+#define INCA_IP_IIC_IIC_SYSCON_1_TRX (1 << 23)
+#define INCA_IP_IIC_IIC_SYSCON_1_INT (1 << 22)
+#define INCA_IP_IIC_IIC_SYSCON_1_ACKDIS (1 << 21)
+#define INCA_IP_IIC_IIC_SYSCON_1_BUM (1 << 20)
+#define INCA_IP_IIC_IIC_SYSCON_1_MOD (value) (((( 1 << 2) - 1) & (value)) << 18)
+#define INCA_IP_IIC_IIC_SYSCON_1_RSC (1 << 17)
+#define INCA_IP_IIC_IIC_SYSCON_1_M10 (1 << 16)
+#define INCA_IP_IIC_IIC_SYSCON_1_RMEN (1 << 15)
+#define INCA_IP_IIC_IIC_SYSCON_1_CO (value) (((( 1 << 3) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_SYSCON_1_IRQE (1 << 7)
+#define INCA_IP_IIC_IIC_SYSCON_1_IRQP (1 << 6)
+#define INCA_IP_IIC_IIC_SYSCON_1_IRQD (1 << 5)
+#define INCA_IP_IIC_IIC_SYSCON_1_BB (1 << 4)
+#define INCA_IP_IIC_IIC_SYSCON_1_LRB (1 << 3)
+#define INCA_IP_IIC_IIC_SYSCON_1_SLA (1 << 2)
+#define INCA_IP_IIC_IIC_SYSCON_1_AL (1 << 1)
+#define INCA_IP_IIC_IIC_SYSCON_1_ADR (1 << 0)
+
+/***I²C System Control Register***/
+#define INCA_IP_IIC_IIC_SYSCON_2 ((volatile u32*)(INCA_IP_IIC+ 0x0010))
+#define INCA_IP_IIC_IIC_SYSCON_2_WMEN (1 << 31)
+#define INCA_IP_IIC_IIC_SYSCON_2_CI (value) (((( 1 << 2) - 1) & (value)) << 26)
+#define INCA_IP_IIC_IIC_SYSCON_2_STP (1 << 25)
+#define INCA_IP_IIC_IIC_SYSCON_2_IGE (1 << 24)
+#define INCA_IP_IIC_IIC_SYSCON_2_TRX (1 << 23)
+#define INCA_IP_IIC_IIC_SYSCON_2_INT (1 << 22)
+#define INCA_IP_IIC_IIC_SYSCON_2_ACKDIS (1 << 21)
+#define INCA_IP_IIC_IIC_SYSCON_2_BUM (1 << 20)
+#define INCA_IP_IIC_IIC_SYSCON_2_MOD (value) (((( 1 << 2) - 1) & (value)) << 18)
+#define INCA_IP_IIC_IIC_SYSCON_2_RSC (1 << 17)
+#define INCA_IP_IIC_IIC_SYSCON_2_M10 (1 << 16)
+#define INCA_IP_IIC_IIC_SYSCON_2_WM (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_SYSCON_2_IRQE (1 << 7)
+#define INCA_IP_IIC_IIC_SYSCON_2_IRQP (1 << 6)
+#define INCA_IP_IIC_IIC_SYSCON_2_IRQD (1 << 5)
+#define INCA_IP_IIC_IIC_SYSCON_2_BB (1 << 4)
+#define INCA_IP_IIC_IIC_SYSCON_2_LRB (1 << 3)
+#define INCA_IP_IIC_IIC_SYSCON_2_SLA (1 << 2)
+#define INCA_IP_IIC_IIC_SYSCON_2_AL (1 << 1)
+#define INCA_IP_IIC_IIC_SYSCON_2_ADR (1 << 0)
+
+/***I²C Write Hardware Modified System Control Register
+***/
+#define INCA_IP_IIC_IIC_WHBSYSCON ((volatile u32*)(INCA_IP_IIC+ 0x0020))
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRWMEN (1 << 31)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETWMEN (1 << 30)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETSTP (1 << 26)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRSTP (1 << 25)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETTRX (1 << 24)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRTRX (1 << 23)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETACKDIS (1 << 22)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRACKDIS (1 << 21)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETBUM (1 << 20)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRBUM (1 << 19)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETRSC (1 << 17)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRSC (1 << 16)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETRMEN (1 << 15)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRMEN (1 << 14)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQE (1 << 10)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQP (1 << 9)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQD (1 << 8)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQE (1 << 7)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQP (1 << 6)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQD (1 << 5)
+#define INCA_IP_IIC_IIC_WHBSYSCON_SETAL (1 << 2)
+#define INCA_IP_IIC_IIC_WHBSYSCON_CLRAL (1 << 1)
+
+/***I²C Bus Control Register***/
+#define INCA_IP_IIC_IIC_BUSCON_0 ((volatile u32*)(INCA_IP_IIC+ 0x0014))
+#define INCA_IP_IIC_IIC_BUSCON_0_BRPMOD (1 << 31)
+#define INCA_IP_IIC_IIC_BUSCON_0_PREDIV (value) (((( 1 << 2) - 1) & (value)) << 29)
+#define INCA_IP_IIC_IIC_BUSCON_0_ICA9_0 (value) (((( 1 << 10) - 1) & (value)) << 16)
+#define INCA_IP_IIC_IIC_BUSCON_0_BRP (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_BUSCON_0_SCLEN(value) (1 << value)
+
+#define INCA_IP_IIC_IIC_BUSCON_0_SDAEN(value) (1 << value)
+
+
+/***I²C Bus Control Register***/
+#define INCA_IP_IIC_IIC_BUSCON_1 ((volatile u32*)(INCA_IP_IIC+ 0x0014))
+#define INCA_IP_IIC_IIC_BUSCON_1_BRPMOD (1 << 31)
+#define INCA_IP_IIC_IIC_BUSCON_1_PREDIV (value) (((( 1 << 2) - 1) & (value)) << 29)
+#define INCA_IP_IIC_IIC_BUSCON_1_ICA7_1 (value) (((( 1 << 7) - 1) & (value)) << 17)
+#define INCA_IP_IIC_IIC_BUSCON_1_BRP (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_IIC_IIC_BUSCON_1_SCLEN(value) (1 << value)
+
+#define INCA_IP_IIC_IIC_BUSCON_1_SDAEN(value) (1 << value)
+
+
+/***I²C Receive Transmit Buffer***/
+#define INCA_IP_IIC_IIC_RTB ((volatile u32*)(INCA_IP_IIC+ 0x0018))
+#define INCA_IP_IIC_IIC_RTB_RTB(value) (1 << value)
+
+
+/***********************************************************************/
+/* Module : FB register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_FB (0xBF880000)
+/***********************************************************************/
+
+
+/***FB Access Error Cause Register***/
+#define INCA_IP_FB_FB_ERRCAUSE ((volatile u32*)(INCA_IP_FB+ 0x0100))
+#define INCA_IP_FB_FB_ERRCAUSE_ERR (1 << 31)
+#define INCA_IP_FB_FB_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_FB_FB_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***FB Access Error Address Register***/
+#define INCA_IP_FB_FB_ERRADDR ((volatile u32*)(INCA_IP_FB+ 0x0108))
+#define INCA_IP_FB_FB_ERRADDR_ADDR
+
+/***FB Configuration Register***/
+#define INCA_IP_FB_FB_CFG ((volatile u32*)(INCA_IP_FB+ 0x0800))
+#define INCA_IP_FB_FB_CFG_SVM (1 << 0)
+
+/***********************************************************************/
+/* Module : SRAM register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_SRAM (0xBF980000)
+/***********************************************************************/
+
+
+/***SRAM Size Register***/
+#define INCA_IP_SRAM_SRAM_SIZE ((volatile u32*)(INCA_IP_SRAM+ 0x0800))
+#define INCA_IP_SRAM_SRAM_SIZE_SIZE (value) (((( 1 << 23) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : BIU register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_BIU (0xBFA80000)
+/***********************************************************************/
+
+
+/***BIU Identification Register***/
+#define INCA_IP_BIU_BIU_ID ((volatile u32*)(INCA_IP_BIU+ 0x0000))
+#define INCA_IP_BIU_BIU_ID_ARCH (1 << 16)
+#define INCA_IP_BIU_BIU_ID_ID (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define INCA_IP_BIU_BIU_ID_REV (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***BIU Access Error Cause Register***/
+#define INCA_IP_BIU_BIU_ERRCAUSE ((volatile u32*)(INCA_IP_BIU+ 0x0100))
+#define INCA_IP_BIU_BIU_ERRCAUSE_ERR (1 << 31)
+#define INCA_IP_BIU_BIU_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
+#define INCA_IP_BIU_BIU_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***BIU Access Error Address Register***/
+#define INCA_IP_BIU_BIU_ERRADDR ((volatile u32*)(INCA_IP_BIU+ 0x0108))
+#define INCA_IP_BIU_BIU_ERRADDR_ADDR
+
+/***********************************************************************/
+/* Module : ICU register address and bits */
+/***********************************************************************/
+
+#define INCA_IP_ICU (0xBF101000)
+/***********************************************************************/
+
+
+/***IM0 Interrupt Status Register***/
+#define INCA_IP_ICU_IM0_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0000))
+#define INCA_IP_ICU_IM0_ISR_IR(value) (1 << value)
+
+
+/***IM1 Interrupt Status Register***/
+#define INCA_IP_ICU_IM1_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0200))
+#define INCA_IP_ICU_IM1_ISR_IR(value) (1 << value)
+
+
+/***IM2 Interrupt Status Register***/
+#define INCA_IP_ICU_IM2_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0400))
+#define INCA_IP_ICU_IM2_ISR_IR(value) (1 << value)
+
+
+/***IM0 Interrupt Enable Register***/
+#define INCA_IP_ICU_IM0_IER ((volatile u32*)(INCA_IP_ICU+ 0x0008))
+#define INCA_IP_ICU_IM0_IER_IR(value) (1 << value)
+
+
+/***IM1 Interrupt Enable Register***/
+#define INCA_IP_ICU_IM1_IER ((volatile u32*)(INCA_IP_ICU+ 0x0208))
+#define INCA_IP_ICU_IM1_IER_IR(value) (1 << value)
+
+
+/***IM2 Interrupt Enable Register***/
+#define INCA_IP_ICU_IM2_IER ((volatile u32*)(INCA_IP_ICU+ 0x0408))
+#define INCA_IP_ICU_IM2_IER_IR(value) (1 << value)
+
+
+/***IM0 Interrupt Output Status Register***/
+#define INCA_IP_ICU_IM0_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0010))
+#define INCA_IP_ICU_IM0_IOSR_IR(value) (1 << value)
+
+
+/***IM1 Interrupt Output Status Register***/
+#define INCA_IP_ICU_IM1_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0210))
+#define INCA_IP_ICU_IM1_IOSR_IR(value) (1 << value)
+
+
+/***IM2 Interrupt Output Status Register***/
+#define INCA_IP_ICU_IM2_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0410))
+#define INCA_IP_ICU_IM2_IOSR_IR(value) (1 << value)
+
+
+/***IM0 Interrupt Request Set Register***/
+#define INCA_IP_ICU_IM0_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0018))
+#define INCA_IP_ICU_IM0_IRSR_IR(value) (1 << value)
+
+
+/***IM1 Interrupt Request Set Register***/
+#define INCA_IP_ICU_IM1_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0218))
+#define INCA_IP_ICU_IM1_IRSR_IR(value) (1 << value)
+
+
+/***IM2 Interrupt Request Set Register***/
+#define INCA_IP_ICU_IM2_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0418))
+#define INCA_IP_ICU_IM2_IRSR_IR(value) (1 << value)
+
+
+/***External Interrupt Control Register***/
+#define INCA_IP_ICU_ICU_EICR ((volatile u32*)(INCA_IP_ICU+ 0x0B00))
+#define INCA_IP_ICU_ICU_EICR_EII5 (value) (((( 1 << 3) - 1) & (value)) << 20)
+#define INCA_IP_ICU_ICU_EICR_EII4 (value) (((( 1 << 3) - 1) & (value)) << 16)
+#define INCA_IP_ICU_ICU_EICR_EII3 (value) (((( 1 << 3) - 1) & (value)) << 12)
+#define INCA_IP_ICU_ICU_EICR_EII2 (value) (((( 1 << 3) - 1) & (value)) << 8)
+#define INCA_IP_ICU_ICU_EICR_EII1 (value) (((( 1 << 3) - 1) & (value)) << 4)
+#define INCA_IP_ICU_ICU_EICR_EII0 (value) (((( 1 << 3) - 1) & (value)) << 0)
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
new file mode 100644
index 0000000..bc0db84
--- /dev/null
+++ b/include/configs/incaip.h
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the INCA-IP board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */
+#define CONFIG_INCA_IP 1 /* on a INCA-IP Board */
+
+/* allowed values: 100000000 and 150000000 */
+#define CPU_CLOCK_RATE 150000000 /* 150 MHz clock for the MIPS core */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CFG_SDRAM_BASE 0x80000000
+
+#define CFG_MALLOC_LEN 128*1024
+
+#define CFG_BOOTPARAMS_LEN 128*1024
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF)
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "INCA-IP # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_HZ (CPU_CLOCK_RATE/2)
+#define CFG_MAXARGS 16 /* max number of command args*/
+
+#define CFG_LOAD_ADDR 0x80100000 /* default load address */
+
+#define CFG_MEMTEST_START 0x80200000
+#define CFG_MEMTEST_END 0x80800000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
+
+#define PHYS_FLASH_1 0xb0000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2 0xb0800000 /* Flash Bank #2 */
+
+/* The following #defines are needed to get flash environment right */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (192 << 10)
+
+#define CFG_INIT_SP_OFFSET 0x400000
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_ENV_IS_IN_FLASH 1
+
+/* Address and size of Primary Environment Sector */
+#define CFG_ENV_ADDR 0xB0030000
+#define CFG_ENV_SIZE 0x10000
+
+#define CONFIG_FLASH_16BIT
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_INCA_IP_SWITCH
+#define CONFIG_NET_MULTI
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 4096
+#define CFG_ICACHE_SIZE 4096
+#define CFG_CACHELINE_SIZE 16
+
+#endif /* __CONFIG_H */
diff --git a/lib_mips/Makefile b/lib_mips/Makefile
new file mode 100644
index 0000000..540383d
--- /dev/null
+++ b/lib_mips/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(ARCH).a
+
+AOBJS =
+
+COBJS = board.o time.o mips_linux.o
+
+OBJS = $(AOBJS) $(COBJS)
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/lib_mips/board.c b/lib_mips/board.c
new file mode 100644
index 0000000..81909d3
--- /dev/null
+++ b/lib_mips/board.c
@@ -0,0 +1,403 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <devices.h>
+#include <syscall.h>
+#include <version.h>
+#include <net.h>
+#include <environment.h>
+
+#if ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
+ (CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
+ defined(CFG_ENV_IS_IN_NVRAM)
+#define TOTAL_MALLOC_LEN (CFG_MALLOC_LEN + CFG_ENV_SIZE)
+#else
+#define TOTAL_MALLOC_LEN CFG_MALLOC_LEN
+#endif
+
+#undef DEBUG
+
+extern int timer_init(void);
+
+const char version_string[] =
+ U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
+
+static char *failed = "*** failed ***\n";
+
+/*
+ * Begin and End of memory area for malloc(), and current "brk"
+ */
+static ulong mem_malloc_start;
+static ulong mem_malloc_end;
+static ulong mem_malloc_brk;
+
+
+/*
+ * The Malloc area is immediately below the monitor copy in DRAM
+ */
+static void mem_malloc_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
+
+ mem_malloc_end = dest_addr;
+ mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
+ mem_malloc_brk = mem_malloc_start;
+
+ memset ((void *) mem_malloc_start,
+ 0,
+ mem_malloc_end - mem_malloc_start);
+}
+
+void *sbrk (ptrdiff_t increment)
+{
+ ulong old = mem_malloc_brk;
+ ulong new = old + increment;
+
+ if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
+ return (NULL);
+ }
+ mem_malloc_brk = new;
+ return ((void *) old);
+}
+
+
+static int init_func_ram (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_BOARD_TYPES
+ int board_type = gd->board_type;
+#else
+ int board_type = 0; /* use dummy arg */
+#endif
+ puts ("DRAM: ");
+
+ if ((gd->ram_size = initdram (board_type)) > 0) {
+ print_size (gd->ram_size, "\n");
+ return (0);
+ }
+ puts (failed);
+ return (1);
+}
+
+static int display_banner(void)
+{
+
+ printf ("\n\n%s\n\n", version_string);
+ return (0);
+}
+
+static void display_flash_config(ulong size)
+{
+ puts ("Flash: ");
+ print_size (size, "\n");
+}
+
+
+static int init_baudrate (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ uchar tmp[64]; /* long enough for environment variables */
+ int i = getenv_r ("baudrate", tmp, sizeof (tmp));
+
+ gd->baudrate = (i > 0)
+ ? (int) simple_strtoul (tmp, NULL, 10)
+ : CONFIG_BAUDRATE;
+
+ return (0);
+}
+
+
+/*
+ * Breath some life into the board...
+ *
+ * The first part of initialization is running from Flash memory;
+ * its main purpose is to initialize the RAM so that we
+ * can relocate the monitor code to RAM.
+ */
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+typedef int (init_fnc_t) (void);
+
+init_fnc_t *init_sequence[] = {
+ timer_init,
+ env_init, /* initialize environment */
+ init_baudrate, /* initialze baudrate settings */
+ serial_init, /* serial communications setup */
+ console_init_f,
+ display_banner, /* say that we are here */
+ init_func_ram,
+ NULL,
+};
+
+
+void board_init_f(ulong bootflag)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd_t gd_data, *id;
+ bd_t *bd;
+ init_fnc_t **init_fnc_ptr;
+ ulong addr, addr_sp, len = CFG_MONITOR_LEN;
+
+ /* Pointer is writable since we allocated a register for it.
+ */
+ gd = &gd_data;
+ memset (gd, 0, sizeof (gd_t));
+
+ for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+ if ((*init_fnc_ptr)() != 0) {
+ hang ();
+ }
+ }
+
+ /*
+ * Now that we have DRAM mapped and working, we can
+ * relocate the code and continue running from DRAM.
+ */
+ addr = CFG_SDRAM_BASE + gd->ram_size;
+
+ /* We can reserve some RAM "on top" here.
+ */
+
+ /* round down to next 4 kB limit.
+ */
+ addr &= ~(4096 - 1);
+#ifdef DEBUG
+ printf ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+#endif
+
+ /* Reserve memory for U-Boot code, data & bss
+ * round down to next 4 kB limit
+ */
+ addr -= len;
+ addr &= ~(4096 - 1);
+
+#ifdef DEBUG
+ printf ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
+#endif
+
+ /* Reserve memory for malloc() arena.
+ */
+ addr_sp = addr - TOTAL_MALLOC_LEN;
+#ifdef DEBUG
+ printf ("Reserving %dk for malloc() at: %08lx\n",
+ TOTAL_MALLOC_LEN >> 10, addr_sp);
+#endif
+
+ /*
+ * (permanently) allocate a Board Info struct
+ * and a permanent copy of the "global" data
+ */
+ addr_sp -= sizeof(bd_t);
+ bd = (bd_t *)addr_sp;
+ gd->bd = bd;
+#ifdef DEBUG
+ printf ("Reserving %d Bytes for Board Info at: %08lx\n",
+ sizeof(bd_t), addr_sp);
+#endif
+ addr_sp -= sizeof(gd_t);
+ id = (gd_t *)addr_sp;
+#ifdef DEBUG
+ printf ("Reserving %d Bytes for Global Data at: %08lx\n",
+ sizeof (gd_t), addr_sp);
+#endif
+
+ /* Reserve memory for boot params.
+ */
+ addr_sp -= CFG_BOOTPARAMS_LEN;
+ bd->bi_boot_params = addr_sp;
+#ifdef DEBUG
+ printf ("Reserving %dk for malloc() at: %08lx\n",
+ CFG_BOOTPARAMS_LEN >> 10, addr_sp);
+#endif
+
+ /*
+ * Finally, we set up a new (bigger) stack.
+ *
+ * Leave some safety gap for SP, force alignment on 16 byte boundary
+ * Clear initial stack frame
+ */
+ addr_sp -= 16;
+ addr_sp &= ~0xF;
+ *((ulong *) addr_sp)-- = 0;
+ *((ulong *) addr_sp)-- = 0;
+#ifdef DEBUG
+ printf ("Stack Pointer at: %08lx\n", addr_sp);
+#endif
+ /*
+ * Save local variables to board info struct
+ */
+ bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */
+ bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
+ bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
+
+ memcpy (id, gd, sizeof (gd_t));
+ relocate_code (addr_sp, id, addr);
+
+ /* NOTREACHED - relocate_code() does not return */
+}
+/************************************************************************
+ *
+ * This is the next part if the initialization sequence: we are now
+ * running from RAM and have a "normal" C environment, i. e. global
+ * data can be written, BSS has been cleared, the stack size in not
+ * that critical any more, etc.
+ *
+ ************************************************************************
+ */
+
+void board_init_r (gd_t *id, ulong dest_addr)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ cmd_tbl_t *cmdtp;
+ ulong size;
+ extern void malloc_bin_reloc (void);
+#ifndef CFG_ENV_IS_NOWHERE
+ extern char * env_name_spec;
+#endif
+ char *s, *e;
+ bd_t *bd;
+ int i;
+
+ gd = id;
+ gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+
+#ifdef DEBUG
+ printf ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+#endif
+
+ gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+
+ /*
+ * We have to relocate the command table manually
+ */
+ for (cmdtp = &cmd_tbl[0]; cmdtp->name; cmdtp++) {
+ ulong addr;
+
+ addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
+#if 0
+ printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
+ cmdtp->name, (ulong) (cmdtp->cmd), addr);
+#endif
+ cmdtp->cmd =
+ (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
+
+ addr = (ulong)(cmdtp->name) + gd->reloc_off;
+ cmdtp->name = (char *)addr;
+
+ if (cmdtp->usage) {
+ addr = (ulong)(cmdtp->usage) + gd->reloc_off;
+ cmdtp->usage = (char *)addr;
+ }
+#ifdef CFG_LONGHELP
+ if (cmdtp->help) {
+ addr = (ulong)(cmdtp->help) + gd->reloc_off;
+ cmdtp->help = (char *)addr;
+ }
+#endif
+ }
+ /* there are some other pointer constants we must deal with */
+#ifndef CFG_ENV_IS_NOWHERE
+ env_name_spec += gd->reloc_off;
+#endif
+
+ /* configure available FLASH banks */
+ size = flash_init();
+ display_flash_config (size);
+
+ bd = gd->bd;
+ bd->bi_flashstart = CFG_FLASH_BASE;
+ bd->bi_flashsize = size;
+#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+ bd->bi_flashoffset = CFG_MONITOR_LEN; /* reserved area for U-Boot */
+#else
+ bd->bi_flashoffset = 0;
+#endif
+
+ /* initialize malloc() area */
+ mem_malloc_init();
+ malloc_bin_reloc();
+
+ /* relocate environment function pointers etc. */
+ env_relocate();
+
+ /* board MAC address */
+ s = getenv ("ethaddr");
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+
+ /* IP Address */
+ bd->bi_ip_addr = getenv_IPaddr("ipaddr");
+
+/** leave this here (after malloc(), environment and PCI are working) **/
+ /* Initialize devices */
+ devices_init ();
+
+ /* allocate syscalls table (console_init_r will fill it in */
+ syscall_tbl = (void **) malloc (NR_SYSCALLS * sizeof (void *));
+
+ /* Initialize the console (after the relocation and devices init) */
+ console_init_r ();
+/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+ puts ("Net: ");
+ eth_initialize(gd->bd);
+#endif
+
+ /* main_loop() can return to retry autoboot, if so just run it again. */
+ for (;;) {
+ main_loop ();
+ }
+
+ /* NOTREACHED - no way out of command loop except booting */
+}
+
+void hang (void)
+{
+ puts ("### ERROR ### Please RESET the board ###\n");
+ for (;;);
+}
+
diff --git a/lib_mips/mips_linux.c b/lib_mips/mips_linux.c
new file mode 100644
index 0000000..e73d4d8
--- /dev/null
+++ b/lib_mips/mips_linux.c
@@ -0,0 +1,276 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <cmd_boot.h>
+#include <image.h>
+#include <zlib.h>
+#include <asm/byteorder.h>
+#include <asm/addrspace.h>
+
+#define LINUX_MAX_ENVS 256
+#define LINUX_MAX_ARGS 256
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+extern image_header_t header; /* from cmd_bootm.c */
+
+static int linux_argc;
+static char ** linux_argv;
+
+static char ** linux_env;
+static char * linux_env_p;
+static int linux_env_idx;
+
+static void linux_params_init (ulong start, char * commandline);
+static void linux_env_set (char * env_name, char * env_val);
+
+
+void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+ ulong addr, ulong *len_ptr, int verify)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ ulong len = 0, checksum;
+ ulong initrd_start, initrd_end;
+ ulong data;
+ void (*theKernel)(int, char **, char **, int *);
+ image_header_t *hdr = &header;
+ char *commandline = getenv("bootargs");
+ char env_buf[12];
+
+ theKernel = (void (*)(int, char **, char **, int *))ntohl(hdr->ih_ep);
+
+ /*
+ * Check if there is an initrd image
+ */
+ if (argc >= 3) {
+ SHOW_BOOT_PROGRESS (9);
+
+ addr = simple_strtoul(argv[2], NULL, 16);
+
+ printf ("## Loading Ramdisk Image at %08lx ...\n", addr);
+
+ /* Copy header so we can blank CRC field for re-calculation */
+ memcpy (&header, (char *)addr, sizeof(image_header_t));
+
+ if (ntohl(hdr->ih_magic) != IH_MAGIC) {
+ printf ("Bad Magic Number\n");
+ SHOW_BOOT_PROGRESS (-10);
+ do_reset (cmdtp, flag, argc, argv);
+ }
+
+ data = (ulong)&header;
+ len = sizeof(image_header_t);
+
+ checksum = ntohl(hdr->ih_hcrc);
+ hdr->ih_hcrc = 0;
+
+ if (crc32 (0, (char *)data, len) != checksum) {
+ printf ("Bad Header Checksum\n");
+ SHOW_BOOT_PROGRESS (-11);
+ do_reset (cmdtp, flag, argc, argv);
+ }
+
+ SHOW_BOOT_PROGRESS (10);
+
+ print_image_hdr (hdr);
+
+ data = addr + sizeof(image_header_t);
+ len = ntohl(hdr->ih_size);
+
+ if (verify) {
+ ulong csum = 0;
+
+ printf (" Verifying Checksum ... ");
+ csum = crc32 (0, (char *)data, len);
+ if (csum != ntohl(hdr->ih_dcrc)) {
+ printf ("Bad Data CRC\n");
+ SHOW_BOOT_PROGRESS (-12);
+ do_reset (cmdtp, flag, argc, argv);
+ }
+ printf ("OK\n");
+ }
+
+ SHOW_BOOT_PROGRESS (11);
+
+ if ((hdr->ih_os != IH_OS_LINUX) ||
+ (hdr->ih_arch != IH_CPU_MIPS) ||
+ (hdr->ih_type != IH_TYPE_RAMDISK) ) {
+ printf ("No Linux MIPS Ramdisk Image\n");
+ SHOW_BOOT_PROGRESS (-13);
+ do_reset (cmdtp, flag, argc, argv);
+ }
+
+ /*
+ * Now check if we have a multifile image
+ */
+ } else if ((hdr->ih_type==IH_TYPE_MULTI) && (len_ptr[1])) {
+ ulong tail = ntohl(len_ptr[0]) % 4;
+ int i;
+
+ SHOW_BOOT_PROGRESS (13);
+
+ /* skip kernel length and terminator */
+ data = (ulong)(&len_ptr[2]);
+ /* skip any additional image length fields */
+ for (i=1; len_ptr[i]; ++i)
+ data += 4;
+ /* add kernel length, and align */
+ data += ntohl(len_ptr[0]);
+ if (tail) {
+ data += 4 - tail;
+ }
+
+ len = ntohl(len_ptr[1]);
+
+ } else {
+ /*
+ * no initrd image
+ */
+ SHOW_BOOT_PROGRESS (14);
+
+ data = 0;
+ }
+
+#ifdef DEBUG
+ if (!data) {
+ printf ("No initrd\n");
+ }
+#endif
+
+ if (data) {
+ initrd_start = data;
+ initrd_end = initrd_start + len;
+ } else {
+ initrd_start = 0;
+ initrd_end = 0;
+ }
+
+ SHOW_BOOT_PROGRESS (15);
+
+#ifdef DEBUG
+ printf ("## Transferring control to Linux (at address %08lx) ...\n",
+ (ulong)theKernel);
+#endif
+
+ linux_params_init (PHYSADDR(gd->bd->bi_boot_params), commandline);
+
+ sprintf (env_buf, "%lu", gd->ram_size >> 20);
+ linux_env_set ("memsize", env_buf);
+
+ sprintf (env_buf, "0x%08X", (uint)PHYSADDR(initrd_start));
+ linux_env_set ("initrd_start", env_buf);
+
+ sprintf (env_buf, "0x%X", (uint)(initrd_end - initrd_start));
+ linux_env_set ("initrd_size", env_buf);
+
+ sprintf (env_buf, "0x%08X", (uint)(gd->bd->bi_flashstart));
+ linux_env_set ("flash_start", env_buf);
+
+ sprintf (env_buf, "0x%X", (uint)(gd->bd->bi_flashsize));
+ linux_env_set ("flash_size", env_buf);
+
+ /* we assume that the kernel is in place */
+ printf("\nStarting kernel ...\n\n");
+
+ theKernel(linux_argc, linux_argv, linux_env, 0);
+}
+
+static void linux_params_init (ulong start, char * line)
+{
+ char * next, * quote, * argp;
+
+ linux_argc = 1;
+ linux_argv = (char **) start;
+ linux_argv[0] = 0;
+ argp = (char *)(linux_argv + LINUX_MAX_ARGS);
+
+ next = line;
+
+ while (line && *line && linux_argc < LINUX_MAX_ARGS)
+ {
+ quote = strchr (line, '"');
+ next = strchr (line, ' ');
+
+ while (next != NULL && quote != NULL && quote < next)
+ {
+ /* we found a left quote before the next blank
+ * now we have to find the matching right quote
+ */
+ next = strchr (quote + 1, '"');
+ if (next != NULL)
+ {
+ quote = strchr (next + 1, '"');
+ next = strchr (next + 1, ' ');
+ }
+ }
+
+ if (next == NULL)
+ {
+ next = line + strlen (line);
+ }
+
+ linux_argv [linux_argc] = argp;
+ memcpy (argp, line, next - line);
+ argp [next - line] = 0;
+
+ argp += next - line + 1;
+ linux_argc ++;
+
+ if (*next) next ++;
+
+ line = next;
+ }
+
+ linux_env = (char **)(((ulong)argp + 15) & ~15);
+ linux_env [0] = 0;
+ linux_env_p = (char *)(linux_env + LINUX_MAX_ENVS);
+ linux_env_idx = 0;
+}
+
+static void linux_env_set (char * env_name, char * env_val)
+{
+ if (linux_env_idx < LINUX_MAX_ENVS - 1)
+ {
+ linux_env [linux_env_idx] = linux_env_p;
+
+ strcpy (linux_env_p, env_name);
+ linux_env_p += strlen (env_name);
+
+ strcpy (linux_env_p, "=");
+ linux_env_p += 1;
+
+ strcpy (linux_env_p, env_val);
+ linux_env_p += strlen (env_val);
+
+ linux_env_p ++;
+ linux_env [++ linux_env_idx] = 0;
+ }
+}
diff --git a/lib_mips/time.c b/lib_mips/time.c
new file mode 100644
index 0000000..9e6138d
--- /dev/null
+++ b/lib_mips/time.c
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+
+static inline void mips_compare_set(u32 v)
+{
+ asm volatile ("mtc0 %0, $11" : : "r" (v));
+}
+
+static inline void mips_count_set(u32 v)
+{
+ asm volatile ("mtc0 %0, $9" : : "r" (v));
+}
+
+
+static inline u32 mips_count_get(void)
+{
+ u32 count;
+
+ asm volatile ("mfc0 %0, $9" : "=r" (count) :);
+ return count;
+}
+
+/*
+ * timer without interrupts
+ */
+
+int timer_init(void)
+{
+ mips_compare_set(0);
+ mips_count_set(0);
+
+ return 0;
+}
+
+void reset_timer(void)
+{
+ mips_count_set(0);
+}
+
+ulong get_timer(ulong base)
+{
+ return mips_count_get() - base;
+}
+
+void set_timer(ulong t)
+{
+ mips_count_set(t);
+}
+
+void udelay (unsigned long usec)
+{
+ ulong tmo;
+ ulong start = get_timer(0);
+
+ tmo = usec * CFG_HZ / 1000;
+ tmo /= 1000;
+
+ while ((ulong)((mips_count_get() - start)) < tmo)
+ /*NOP*/;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On MIPS it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return mips_count_get();
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On MIPS it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return CFG_HZ;
+}
+
+