summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorShiraz Hashim <shiraz.hashim@st.com>2012-05-07 13:06:53 +0530
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-07-07 14:07:41 +0200
commitbda7f435a22c024959e831f089da19052cfff113 (patch)
treea80cccc68497cd8db674283e781a41ddc3019af8
parent25b741a4efc280ab58e8a2d7b669de6d4ea4a7fb (diff)
downloadu-boot-imx-bda7f435a22c024959e831f089da19052cfff113.zip
u-boot-imx-bda7f435a22c024959e831f089da19052cfff113.tar.gz
u-boot-imx-bda7f435a22c024959e831f089da19052cfff113.tar.bz2
SPEAr: Enable dcache for fast file transfer
Enable data cache with 1:1 mapping of DDR to enable fast file transfer over tty which was doing lot of copy. This feature is enabled only for flashing operation i.e. when CONFIG_SPEAR_USBTTY is enabled. This has been tested on SPEAr320, SPEAr600 and SPEAr900 evaluation boards. Following figures show an estimate on the performance improvements. The test setup was a Linux host (not Windows) and involved measurement of only binary transfer time, through kermit. The flash erase and flash copy time would be unaffected by these patches. Another thing is this that the timings remained more or less same across ARM9 and Cortex based devices, hence reporting only one of the cases. Before Enhancements =================== $ time ukermit.small -p /dev/ttyACM0 -f spear320_uImage.img Downloading file: 100.00% completed(2014080/2014080 bytes) real 0m41.228s user 0m0.002s sys 0m0.064s After Enhancements ================== $ time ukermit.large -p /dev/ttyACM0 -f spear320_uImage.img Downloading file: 100.00% completed(2014080/2014080 bytes) real 0m5.441s user 0m0.001s sys 0m0.001s Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com> Signed-off-by: Stefan Roese <sr@denx.de>
-rw-r--r--board/spear/common/spr_misc.c4
1 files changed, 4 insertions, 0 deletions
diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c
index 043c72a..99a6595 100644
--- a/board/spear/common/spr_misc.c
+++ b/board/spear/common/spr_misc.c
@@ -76,6 +76,10 @@ int misc_init_r(void)
setenv("stdin", "usbtty");
setenv("stdout", "usbtty");
setenv("stderr", "usbtty");
+
+#ifndef CONFIG_SYS_NO_DCACHE
+ dcache_enable();
+#endif
#endif
return 0;
}