summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-01-02 16:05:07 +0000
committerwdenk <wdenk>2004-01-02 16:05:07 +0000
commitb6e4c4033c4f889c452c511d38c77808c67f9cf7 (patch)
tree73a39833805f4cf47588dd1616a1b479ab58a418
parent63f3491242df8e6bd1b5df7296f28959989e2eaf (diff)
downloadu-boot-imx-b6e4c4033c4f889c452c511d38c77808c67f9cf7.zip
u-boot-imx-b6e4c4033c4f889c452c511d38c77808c67f9cf7.tar.gz
u-boot-imx-b6e4c4033c4f889c452c511d38c77808c67f9cf7.tar.bz2
* Patch by Denis Peter, 8 Dec 2003
- add support for the PATI board (MPC555) - add SPI support for the MPC5xx * Patch by Anders Larsen, 08 Dec 2003: add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target; cleanup some redundand #defines
-rw-r--r--CHANGELOG9
-rw-r--r--Makefile3
-rw-r--r--board/mpl/common/common_util.c50
-rw-r--r--board/mpl/common/flash.c38
-rw-r--r--board/mpl/pati/Makefile48
-rw-r--r--board/mpl/pati/cmd_pati.c451
-rw-r--r--board/mpl/pati/config.mk31
-rw-r--r--board/mpl/pati/pati.c618
-rw-r--r--board/mpl/pati/pati.h440
-rw-r--r--board/mpl/pati/pci_eeprom.h91
-rw-r--r--board/mpl/pati/plx9056.h114
-rw-r--r--board/mpl/pati/u-boot.lds137
-rw-r--r--cpu/mpc5xx/Makefile2
-rw-r--r--cpu/mpc5xx/cpu.c19
-rw-r--r--cpu/mpc5xx/cpu_init.c4
-rw-r--r--cpu/mpc5xx/interrupts.c42
-rw-r--r--cpu/mpc5xx/spi.c416
-rw-r--r--cpu/mpc5xx/start.S50
-rw-r--r--drivers/rtl8139.c56
-rw-r--r--include/asm-arm/u-boot-arm.h2
-rw-r--r--include/common.h1
-rw-r--r--include/configs/PATI.h285
-rw-r--r--include/mpc5xx.h14
-rw-r--r--lib_arm/armlinux.c20
24 files changed, 2885 insertions, 56 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 2c8c336..32d6c62 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,15 @@
Changes since U-Boot 1.0.0:
======================================================================
+* Patch by Denis Peter, 8 Dec 2003
+ - add support for the PATI board (MPC555)
+ - add SPI support for the MPC5xx
+
+* Patch by Anders Larsen, 08 Dec 2003:
+ add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
+ to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
+ cleanup some redundand #defines
+
* Patch by André Schwarz, 8 Dec 2003:
fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
- TX and RX deskriptors must be quad-word aligned
diff --git a/Makefile b/Makefile
index bb62b0e..36cc089 100644
--- a/Makefile
+++ b/Makefile
@@ -198,6 +198,9 @@ unconfig:
cmi_mpc5xx_config: unconfig
@./mkconfig $(@:_config=) ppc mpc5xx cmi
+PATI_config:unconfig
+ @./mkconfig $(@:_config=) ppc mpc5xx pati mpl
+
#########################################################################
## MPC5xxx Systems
#########################################################################
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 9c98c93..5117394 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -42,6 +42,9 @@
#include "../mip405/mip405.h"
#include <405gp_pci.h>
#endif
+#if defined(CONFIG_PATI)
+#define FIRM_START 0xFFF00000
+#endif
extern int gunzip(void *, int, uchar *, int *);
extern int mem_test(ulong start, ulong ramsize, int quiet);
@@ -60,14 +63,17 @@ mpl_prg(uchar *src, ulong size)
ulong start;
flash_info_t *info;
int i, rc;
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+#if defined(CONFIG_PATI)
+ int start_sect;
+#endif
+#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
char *copystr = (char *)src;
ulong *magic = (ulong *)src;
#endif
info = &flash_info[0];
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
if (ntohl(magic[0]) != IH_MAGIC) {
puts("Bad Magic number\n");
return -1;
@@ -90,6 +96,7 @@ mpl_prg(uchar *src, ulong size)
printf("Wrong Firmware Image: %s\n", &copystr[i]);
return -1;
}
+#if !defined(CONFIG_PATI)
start = 0 - size;
for (i = info->sector_count-1; i > 0; i--) {
info->protect[i] = 0; /* unprotect this sector */
@@ -106,6 +113,36 @@ mpl_prg(uchar *src, ulong size)
return (1);
}
+#else /* #if !defined(CONFIG_PATI */
+ start = FIRM_START;
+ start_sect = -1;
+ for (i = 0; i < info->sector_count; i++) {
+ if (start < info->start[i]) {
+ start_sect = i - 1;
+ break;
+ }
+ }
+
+ info->protect[i - 1] = 0; /* unprotect this sector */
+ for (; i < info->sector_count; i++) {
+ if ((start + size) < info->start[i])
+ break;
+ info->protect[i] = 0; /* unprotect this sector */
+ }
+
+ i--;
+ /* set-up flash location */
+ /* now erase flash */
+ printf ("Erasing at %lx to %lx (sector %d to %d) (%lx to %lx)\n",
+ start, start + size, start_sect, i,
+ info->start[start_sect], info->start[i]);
+ if ((rc = flash_erase (info, start_sect, i)) != 0) {
+ puts ("ERROR ");
+ flash_perror (rc);
+ return (1);
+ }
+#endif /* defined(CONFIG_PATI) */
+
#elif defined(CONFIG_VCMA9)
start = 0;
for (i = 0; i <info->sector_count; i++) {
@@ -227,7 +264,7 @@ mpl_prg_image(uchar *ld_addr)
return(rc);
}
-
+#if !defined(CONFIG_PATI)
void get_backup_values(backup_t *buf)
{
i2c_read(CFG_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)buf,sizeof(backup_t));
@@ -417,14 +454,17 @@ void show_stdio_dev(void)
}
}
+#endif /* #if !defined(CONFIG_PATI) */
int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong size,src,ld_addr;
int result;
+#if !defined(CONFIG_PATI)
backup_t back;
src = MULTI_PURPOSE_SOCKET_ADDR;
size = IMAGE_SIZE;
+#endif
if (strcmp(argv[1], "flash") == 0)
{
@@ -460,11 +500,13 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
result=mpl_prg_image((uchar *)ld_addr);
return result;
}
+#if !defined(CONFIG_PATI)
if (strcmp(argv[2], "mps") == 0) {
puts("\nupdating bootloader image from MPS\n");
result=mpl_prg((uchar *)src,size);
return result;
}
+#endif /* #if !defined(CONFIG_PATI) */
}
if (strcmp(argv[1], "mem") == 0)
{
@@ -490,6 +532,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}while(result);
return 0;
}
+#if !defined(CONFIG_PATI)
if (strcmp(argv[1], "clearenvvalues") == 0)
{
if (strcmp(argv[2], "yes") == 0)
@@ -512,6 +555,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
set_backup_values(1);
return 0;
}
+#endif
printf("Usage:\n%s\n", cmdtp->usage);
return 1;
}
diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c
index 5f50200..fd43008 100644
--- a/board/mpl/common/flash.c
+++ b/board/mpl/common/flash.c
@@ -36,6 +36,8 @@
*/
#include <common.h>
+
+#if !defined(CONFIG_PATI)
#include <ppc4xx.h>
#include <asm/processor.h>
#include "common_util.h"
@@ -46,6 +48,9 @@
#include "../pip405/pip405.h"
#endif
#include <405gp_pci.h>
+#else /* defined(CONFIG_PATI) */
+#include <mpc5xx.h>
+#endif
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
@@ -56,22 +61,15 @@ static int write_word (flash_info_t *info, ulong dest, ulong data);
void unlock_intel_sectors(flash_info_t *info,ulong addr,ulong cnt);
-
-#ifdef CONFIG_PIP405
#define ADDR0 0x5555
#define ADDR1 0x2aaa
#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_MIP405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
#define FALSE 0
#define TRUE 1
+#if !defined(CONFIG_PATI)
+
/*-----------------------------------------------------------------------
* Some CS switching routines:
*
@@ -151,11 +149,16 @@ void setup_cs_reloc(void)
}
}
+#endif /* #if !defined(CONFIG_PATI) */
unsigned long flash_init (void)
{
- unsigned long size_b0, size_b1,flashcr, size_reg;
- int mode, i;
+ unsigned long size_b0;
+ int i;
+
+#if !defined(CONFIG_PATI)
+ unsigned long size_b1,flashcr,size_reg;
+ int mode;
extern char version_string;
char *p=&version_string;
@@ -169,6 +172,7 @@ unsigned long flash_init (void)
else
printf("(%s Boot) ",(mode & BOOT_MPS) ?
"MPS" : "Flash");
+#endif /* #if !defined(CONFIG_PATI) */
/* Init: no FLASHes known */
for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
@@ -190,6 +194,7 @@ unsigned long flash_init (void)
CFG_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
+#if !defined(CONFIG_PATI)
/* protect reset vector */
flash_info[0].protect[flash_info[0].sector_count-1] = 1;
size_b1 = 0 ;
@@ -233,7 +238,7 @@ unsigned long flash_init (void)
mtdcr(ebccfgd, flashcr);
}
#if 0
- /* enable this if you want to test if
+ /* enable this (PIP405/MIP405 only) if you want to test if
the relocation has be done ok.
This will disable both Chipselects */
mtdcr (ebccfga, pb0cr);
@@ -250,6 +255,15 @@ unsigned long flash_init (void)
}
p++;
}
+#else /* #if !defined(CONFIG_PATI) */
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+#endif /* #if !defined(CONFIG_PATI) */
return (size_b0);
}
diff --git a/board/mpl/pati/Makefile b/board/mpl/pati/Makefile
new file mode 100644
index 0000000..1a9ce12
--- /dev/null
+++ b/board/mpl/pati/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+#
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := pati.o ../common/flash.o ../common/memtst.o cmd_pati.o ../common/common_util.o
+#### cmd_pati.o
+SOBJS :=
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
new file mode 100644
index 0000000..cdab286
--- /dev/null
+++ b/board/mpl/pati/cmd_pati.c
@@ -0,0 +1,451 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Adapted for PATI
+ */
+
+#include <common.h>
+#include <command.h>
+#define PLX9056_LOC
+#include "plx9056.h"
+#include "pati.h"
+#include "pci_eeprom.h"
+
+extern void show_pld_regs(void);
+extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+extern void user_led0(int led_on);
+extern void user_led1(int led_on);
+
+/* ------------------------------------------------------------------------- */
+#if defined(CFG_PCI_CON_DEVICE)
+extern void pci_con_disc(void);
+extern void pci_con_connect(void);
+#endif
+
+/******************************************************************************
+ * Eeprom Support
+ ******************************************************************************/
+unsigned long get32(unsigned long addr)
+{
+ unsigned long *p=(unsigned long *)addr;
+ return *p;
+}
+
+void set32(unsigned long addr,unsigned long data)
+{
+ unsigned long *p=(unsigned long *)addr;
+ *p=data;
+}
+
+#define PCICFG_GET_REG(x) (get32((x) + PCI_CONFIG_BASE))
+#define PCICFG_SET_REG(x,y) (set32((x) + PCI_CONFIG_BASE,(y)))
+
+
+/******************************************************************************
+ * reload_pci_eeprom
+ ******************************************************************************/
+
+static void reload_pci_eeprom(void)
+{
+ unsigned long reg;
+ /* Set Bit 29 and clear it again */
+ reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+ udelay(1);
+ /* set it*/
+ reg|=(1<<29);
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+ /* EECLK @ 33MHz = 125kHz
+ * -> extra long load = 32 * 16bit = 512Bit @ 125kHz = 4.1msec
+ * use 20msec
+ */
+ udelay(20000); /* wait 20ms */
+ reg &= ~(1<<29); /* set it low */
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+ udelay(1); /* wait some time */
+}
+
+/******************************************************************************
+ * clock_pci_eeprom
+ ******************************************************************************/
+
+static void clock_pci_eeprom(void)
+{
+ unsigned long reg;
+ /* clock is low, data is valid */
+ reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+ udelay(1);
+ /* set clck high */
+ reg|=(1<<24);
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+ udelay(1); /* wait some time */
+ reg &= ~(1<<24); /* set clock low */
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+ udelay(1); /* wait some time */
+}
+
+/******************************************************************************
+ * send_pci_eeprom_cmd
+ ******************************************************************************/
+static void send_pci_eeprom_cmd(unsigned long cmd, unsigned char len)
+{
+ unsigned long reg;
+ int i;
+ reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+ /* Clear all EEPROM bits */
+ reg &= ~(0xF << 24);
+ /* Toggle EEPROM's Chip select to get it out of Shift Register Mode */
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+ udelay(1); /* wait some time */
+ /* Enable EEPROM Chip Select */
+ reg |= (1 << 25);
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+ /* Send EEPROM command - one bit at a time */
+ for (i = (int)(len-1); i >= 0; i--) {
+ /* Check if current bit is 0 or 1 */
+ if (cmd & (1 << i))
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,(reg | (1<<26)));
+ else
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+ clock_pci_eeprom();
+ }
+}
+
+/******************************************************************************
+ * write_pci_eeprom_offs
+ ******************************************************************************/
+static void write_pci_eeprom_offs(unsigned short offset, unsigned short value)
+{
+ unsigned long reg;
+ int bitpos, cmdshft, cmdlen, timeout;
+ /* we're using the Eeprom 93CS66 */
+ cmdshft = 2;
+ cmdlen = EE66_CMD_LEN;
+ /* Send Write_Enable command to EEPROM */
+ send_pci_eeprom_cmd((EE_WREN << cmdshft),cmdlen);
+ /* Send EEPROM Write command and offset to EEPROM */
+ send_pci_eeprom_cmd((EE_WRITE << cmdshft) | (offset / 2),cmdlen);
+ reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+ /* Clear all EEPROM bits */
+ reg &= ~(0xF << 24);
+ /* Make sure EEDO Input is disabled for some PLX chips */
+ reg &= ~(1 << 31);
+ /* Enable EEPROM Chip Select */
+ reg |= (1 << 25);
+ /* Write 16-bit value to EEPROM - one bit at a time */
+ for (bitpos = 15; bitpos >= 0; bitpos--) {
+ /* Get bit value and shift into result */
+ if (value & (1 << bitpos))
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,(reg | (1<<26)));
+ else
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg );
+ clock_pci_eeprom();
+ } /* for */
+ /* Deselect Chip */
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(1 << 25));
+ /* Re-select Chip */
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg | (1 << 25));
+ /* A small delay is needed to let EEPROM complete */
+ timeout = 0;
+ do {
+ udelay(10);
+ reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+ timeout++;
+ } while (((reg & (1 << 27)) == 0) && timeout < 20000);
+ /* Send Write_Disable command to EEPROM */
+ send_pci_eeprom_cmd((EE_WDS << cmdshft),cmdlen);
+ /* Clear Chip Select and all other EEPROM bits */
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(0xF << 24));
+}
+
+
+/******************************************************************************
+ * read_pci_eeprom_offs
+ ******************************************************************************/
+static void read_pci_eeprom_offs(unsigned short offset, unsigned short *pvalue)
+{
+ unsigned long reg;
+ int bitpos, cmdshft, cmdlen;
+ /* we're using the Eeprom 93CS66 */
+ cmdshft = 2;
+ cmdlen = EE66_CMD_LEN;
+ /* Send EEPROM read command and offset to EEPROM */
+ send_pci_eeprom_cmd((EE_READ << cmdshft) | (offset / 2),cmdlen);
+ /* Set EEPROM write output bit */
+ reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+ /* Set EEDO Input enable */
+ reg |= (1 << 31);
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg | (1 << 26));
+ /* Get 16-bit value from EEPROM - one bit at a time */
+ for (bitpos = 0; bitpos < 16; bitpos++) {
+ clock_pci_eeprom();
+ udelay(10);
+ reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+ /* Get bit value and shift into result */
+ if (reg & (1 << 27))
+ *pvalue = (unsigned short)((*pvalue << 1) | 1);
+ else
+ *pvalue = (unsigned short)(*pvalue << 1);
+ }
+ /* Clear EEDO Input enable */
+ reg &= ~(1 << 31);
+ /* Clear Chip Select and all other EEPROM bits */
+ PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(0xF << 24));
+}
+
+
+/******************************************************************************
+ * EEPROM read/writes
+******************************************************************************/
+
+#undef EEPROM_DBG
+static int pati_pci_eeprom_erase(void)
+{
+ int i;
+ printf("Erasing EEPROM ");
+ for( i=0; i < PATI_EEPROM_LAST_OFFSET; i+=2) {
+ write_pci_eeprom_offs(i,0xffff);
+ if((i%0x10))
+ printf(".");
+ }
+ printf("\nDone\n");
+ return 0;
+}
+
+static int pati_pci_eeprom_prg(void)
+{
+ int i;
+ i=0;
+ printf("Programming EEPROM ");
+ while(pati_eeprom[i].offset<0xffff) {
+ write_pci_eeprom_offs(pati_eeprom[i].offset,pati_eeprom[i].value);
+ #ifdef EEPROM_DBG
+ printf("0x%04X: 0x%04X\n",pati_eeprom[i].offset, pati_eeprom[i].value);
+ #else
+ if((i%0x10))
+ printf(".");
+ #endif
+ i++;
+ }
+ printf("\nDone\n");
+ return 0;
+}
+
+static int pati_pci_eeprom_write(unsigned short offset, unsigned long addr, unsigned short size)
+{
+ int i;
+ unsigned short value;
+ unsigned short *buffer =(unsigned short *)addr;
+ if((offset + size) > PATI_EEPROM_LAST_OFFSET) {
+ size = PATI_EEPROM_LAST_OFFSET - offset;
+ }
+ printf("Write To EEPROM from 0x%lX to 0x%X 0x%X words\n", addr, offset, size/2);
+ for( i = offset; i< (offset + size); i+=2) {
+ value = *buffer++;
+ write_pci_eeprom_offs(i,value);
+ #ifdef EEPROM_DBG
+ printf("0x%04X: 0x%04X\n",i, value);
+ #else
+ if((i%0x10))
+ printf(".");
+ #endif
+ }
+ printf("\nDone\n");
+ return 0;
+}
+
+static int pati_pci_eeprom_read(unsigned short offset, unsigned long addr, unsigned short size)
+{
+ int i;
+ unsigned short value;
+ unsigned short *buffer =(unsigned short *)addr;
+ if((offset + size) > PATI_EEPROM_LAST_OFFSET) {
+ size = PATI_EEPROM_LAST_OFFSET - offset;
+ }
+ printf("Read from EEPROM from 0x%X to 0x%lX 0x%X words\n", offset, addr, size/2);
+ for( i = offset; i< (offset + size); i+=2) {
+ read_pci_eeprom_offs(i,&value);
+ *buffer++=value;
+ #ifdef EEPROM_DBG
+ printf("0x%04X: 0x%04X\n",i, value);
+ #else
+ if((i%0x10))
+ printf(".");
+ #endif
+ }
+ printf("\nDone\n");
+ return 0;
+}
+
+
+
+/******************************************************************************
+ * PCI Bridge Registers Dump
+*******************************************************************************/
+static void display_pci_regs(void)
+{
+ printf(" PCI9056_SPACE0_RANGE %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_RANGE));
+ printf(" PCI9056_SPACE0_REMAP %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_REMAP));
+ printf(" PCI9056_LOCAL_DMA_ARBIT %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_DMA_ARBIT));
+ printf(" PCI9056_ENDIAN_DESC %08lX\n",PCICFG_GET_REG(PCI9056_ENDIAN_DESC));
+ printf(" PCI9056_EXP_ROM_RANGE %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_RANGE));
+ printf(" PCI9056_EXP_ROM_REMAP %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_REMAP));
+ printf(" PCI9056_SPACE0_ROM_DESC %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_ROM_DESC));
+ printf(" PCI9056_DM_RANGE %08lX\n",PCICFG_GET_REG(PCI9056_DM_RANGE));
+ printf(" PCI9056_DM_MEM_BASE %08lX\n",PCICFG_GET_REG(PCI9056_DM_MEM_BASE));
+ printf(" PCI9056_DM_IO_BASE %08lX\n",PCICFG_GET_REG(PCI9056_DM_IO_BASE));
+ printf(" PCI9056_DM_PCI_MEM_REMAP %08lX\n",PCICFG_GET_REG(PCI9056_DM_PCI_MEM_REMAP));
+ printf(" PCI9056_DM_PCI_IO_CONFIG %08lX\n",PCICFG_GET_REG(PCI9056_DM_PCI_IO_CONFIG));
+ printf(" PCI9056_SPACE1_RANGE %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_RANGE));
+ printf(" PCI9056_SPACE1_REMAP %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_REMAP));
+ printf(" PCI9056_SPACE1_DESC %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_DESC));
+ printf(" PCI9056_DM_DAC %08lX\n",PCICFG_GET_REG(PCI9056_DM_DAC));
+ printf(" PCI9056_MAILBOX0 %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX0));
+ printf(" PCI9056_MAILBOX1 %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX1));
+ printf(" PCI9056_MAILBOX2 %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX2));
+ printf(" PCI9056_MAILBOX3 %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX3));
+ printf(" PCI9056_MAILBOX4 %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX4));
+ printf(" PCI9056_MAILBOX5 %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX5));
+ printf(" PCI9056_MAILBOX6 %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX6));
+ printf(" PCI9056_MAILBOX7 %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX7));
+ printf(" PCI9056_PCI_TO_LOC_DBELL %08lX\n",PCICFG_GET_REG(PCI9056_PCI_TO_LOC_DBELL));
+ printf(" PCI9056_LOC_TO_PCI_DBELL %08lX\n",PCICFG_GET_REG(PCI9056_LOC_TO_PCI_DBELL));
+ printf(" PCI9056_INT_CTRL_STAT %08lX\n",PCICFG_GET_REG(PCI9056_INT_CTRL_STAT));
+ printf(" PCI9056_EEPROM_CTRL_STAT %08lX\n",PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT));
+ printf(" PCI9056_PERM_VENDOR_ID %08lX\n",PCICFG_GET_REG(PCI9056_PERM_VENDOR_ID));
+ printf(" PCI9056_REVISION_ID %08lX\n",PCICFG_GET_REG(PCI9056_REVISION_ID));
+ printf(" \n");
+ printf(" PCI9056_VENDOR_ID %08lX\n",PCICFG_GET_REG(PCI9056_VENDOR_ID));
+ printf(" PCI9056_COMMAND %08lX\n",PCICFG_GET_REG(PCI9056_COMMAND));
+ printf(" PCI9056_REVISION %08lX\n",PCICFG_GET_REG(PCI9056_REVISION));
+ printf(" PCI9056_CACHE_SIZE %08lX\n",PCICFG_GET_REG(PCI9056_CACHE_SIZE));
+ printf(" PCI9056_RTR_BASE %08lX\n",PCICFG_GET_REG(PCI9056_RTR_BASE));
+ printf(" PCI9056_RTR_IO_BASE %08lX\n",PCICFG_GET_REG(PCI9056_RTR_IO_BASE));
+ printf(" PCI9056_LOCAL_BASE0 %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_BASE0));
+ printf(" PCI9056_LOCAL_BASE1 %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_BASE1));
+ printf(" PCI9056_UNUSED_BASE1 %08lX\n",PCICFG_GET_REG(PCI9056_UNUSED_BASE1));
+ printf(" PCI9056_UNUSED_BASE2 %08lX\n",PCICFG_GET_REG(PCI9056_UNUSED_BASE2));
+ printf(" PCI9056_CIS_PTR %08lX\n",PCICFG_GET_REG(PCI9056_CIS_PTR));
+ printf(" PCI9056_SUB_ID %08lX\n",PCICFG_GET_REG(PCI9056_SUB_ID));
+ printf(" PCI9056_EXP_ROM_BASE %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_BASE));
+ printf(" PCI9056_CAP_PTR %08lX\n",PCICFG_GET_REG(PCI9056_CAP_PTR));
+ printf(" PCI9056_INT_LINE %08lX\n",PCICFG_GET_REG(PCI9056_INT_LINE));
+ printf(" PCI9056_PM_CAP_ID %08lX\n",PCICFG_GET_REG(PCI9056_PM_CAP_ID));
+ printf(" PCI9056_PM_CSR %08lX\n",PCICFG_GET_REG(PCI9056_PM_CSR));
+ printf(" PCI9056_HS_CAP_ID %08lX\n",PCICFG_GET_REG(PCI9056_HS_CAP_ID));
+ printf(" PCI9056_VPD_CAP_ID %08lX\n",PCICFG_GET_REG(PCI9056_VPD_CAP_ID));
+ printf(" PCI9056_VPD_DATA %08lX\n",PCICFG_GET_REG(PCI9056_VPD_DATA));
+}
+
+
+int do_pati(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ if (strcmp(argv[1], "info") == 0)
+ {
+ show_pld_regs();
+ return 0;
+ }
+ if (strcmp(argv[1], "pci") == 0)
+ {
+ display_pci_regs();
+ return 0;
+ }
+ if (strcmp(argv[1], "led") == 0)
+ {
+ int led_nr,led_on;
+ led_nr = (int)simple_strtoul(argv[2], NULL, 10);
+ led_on = (int)simple_strtoul(argv[3], NULL, 10);
+ if(!led_nr)
+ user_led0(led_on);
+ else
+ user_led1(led_on);
+ return 0;
+ }
+#if defined(CFG_PCI_CON_DEVICE)
+ if (strcmp(argv[1], "con") == 0) {
+ pci_con_connect();
+ return 0;
+ }
+ if (strcmp(argv[1], "disc") == 0) {
+ pci_con_disc();
+ return 0;
+ }
+#endif
+ if (strcmp(argv[1], "eeprom") == 0) {
+ unsigned long addr;
+ int size, offset;
+ offset = 0;
+ size = PATI_EEPROM_LAST_OFFSET;
+ if(argc>2) {
+ if(argc>3) {
+ addr = simple_strtoul(argv[3], NULL, 16);
+ if(argc>4)
+ offset = (int) simple_strtoul(argv[4], NULL, 16);
+ if(argc>5)
+ size = (int) simple_strtoul(argv[5], NULL, 16);
+ if (strcmp(argv[2], "read") == 0) {
+ return (pati_pci_eeprom_read(offset, addr, size));
+ }
+ if (strcmp(argv[2], "write") == 0) {
+ return (pati_pci_eeprom_write(offset, addr, size));
+ }
+ }
+ if (strcmp(argv[2], "prg") == 0) {
+ return (pati_pci_eeprom_prg());
+ }
+ if (strcmp(argv[2], "era") == 0) {
+ return (pati_pci_eeprom_erase());
+ }
+ if (strcmp(argv[2], "reload") == 0) {
+ reload_pci_eeprom();
+ return 0;
+ }
+
+
+ }
+ }
+
+ return (do_mplcommon(cmdtp, flag, argc, argv));
+}
+
+U_BOOT_CMD(
+ pati, 8, 1, do_pati,
+ "pati - PATI specific Cmds\n",
+ "info - displays board information\n"
+ "pati pci - displays PCI registers\n"
+ "pati led <nr> <on> \n"
+ " - switch LED <nr> <on>\n"
+ "pati flash mem [SrcAddr]\n"
+ " - updates U-Boot with image in memory\n"
+ "pati eeprom <cmd> - PCI EEPROM sub-system\n"
+ " read <addr> <offset> <size>\n"
+ " - read PCI EEPROM to <addr> from <offset> <size> words\n"
+ " write <addr> <offset> <size>\n"
+ " - write PCI EEPROM from <addr> to <offset> <size> words\n"
+ " prg - programm PCI EEPROM with default values\n"
+ " era - erase PCI EEPROM (write all word to 0xffff)\n"
+ " reload- Reload PCI Bridge with EEPROM Values\n"
+ " NOTE: <addr> must start on word boundary\n"
+ " <offset> and <size> must be even byte values\n"
+);
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/pati/config.mk b/board/mpl/pati/config.mk
new file mode 100644
index 0000000..b8a0985
--- /dev/null
+++ b/board/mpl/pati/config.mk
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2003
+# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# EPQ Board Configuration
+#
+
+# Boot from flash at location 0x00000000
+TEXT_BASE = 0xFFF00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
diff --git a/board/mpl/pati/pati.c b/board/mpl/pati/pati.c
new file mode 100644
index 0000000..0355b65
--- /dev/null
+++ b/board/mpl/pati/pati.c
@@ -0,0 +1,618 @@
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ * Atapted for PATI
+ * Denis Peter, d.peter@mpl.ch
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/***********************************************************************************
+ * Bits for the SDRAM controller
+ * -----------------------------
+ *
+ * CAL: CAS Latency. If cleared to 0 (default) the SDRAM controller asserts TA# on
+ * the 2nd Clock after ACTIVE command (CAS Latency = 2). If set to 1 the SDRAM
+ * controller asserts TA# on the 3rd Clock after ACTIVE command (CAS Latency = 3).
+ * RCD: RCD ACTIVE to READ or WRITE Delay (Ras to Cas Delay). If cleared 0 (default)
+ * tRCD of the SDRAM must equal or less 25ns. If set to 1 tRCD must be equal or less 50ns.
+ * WREC:Write Recovery. If cleared 0 (default) tWR of the SDRAM must equal or less 25ns.
+ * If set to 1 tWR must be equal or less 50ns.
+ * RP: Precharge Command Time. If cleared 0 (default) tRP of the SDRAM must equal or less
+ * 25ns. If set to 1 tRP must be equal or less 50ns.
+ * RC: Auto Refresh to Active Time. If cleared 0 (default) tRC of the SDRAM must equal
+ * or less 75ns. If set to 1 tRC must be equal or less 100ns.
+ * LMR: Bit to set the Mode Register of the SDRAM. If set, the next access to the SDRAM
+ * is the Load Mode Register Command.
+ * IIP: Init in progress. Set to 1 for starting the init sequence
+ * (Precharge All). As long this bit is set, the Precharge All is still in progress.
+ * After command has completed, wait at least for 8 refresh (200usec) before proceed.
+ **********************************************************************************/
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <devices.h>
+#include <pci_ids.h>
+#define PLX9056_LOC
+#include "plx9056.h"
+#include "pati.h"
+
+#if defined(__APPLE__)
+/* Leading underscore on symbols */
+# define SYM_CHAR "_"
+#else /* No leading character on symbols */
+# define SYM_CHAR
+#endif
+
+#undef SDRAM_DEBUG
+/*
+ * Macros to generate global absolutes.
+ */
+#define GEN_SYMNAME(str) SYM_CHAR #str
+#define GEN_VALUE(str) #str
+#define GEN_ABS(name, value) \
+ asm (".globl " GEN_SYMNAME(name)); \
+ asm (GEN_SYMNAME(name) " = " GEN_VALUE(value))
+
+
+/************************************************************************
+ * Early debug routines
+ */
+void write_hex (unsigned char i)
+{
+ char cc;
+
+ cc = i >> 4;
+ cc &= 0xf;
+ if (cc > 9)
+ serial_putc (cc + 55);
+ else
+ serial_putc (cc + 48);
+ cc = i & 0xf;
+ if (cc > 9)
+ serial_putc (cc + 55);
+ else
+ serial_putc (cc + 48);
+}
+
+#if defined(SDRAM_DEBUG)
+
+void write_4hex (unsigned long val)
+{
+ write_hex ((unsigned char) (val >> 24));
+ write_hex ((unsigned char) (val >> 16));
+ write_hex ((unsigned char) (val >> 8));
+ write_hex ((unsigned char) val);
+}
+
+#endif
+
+unsigned long in32(unsigned long addr)
+{
+ unsigned long *p=(unsigned long *)addr;
+ return *p;
+}
+
+void out32(unsigned long addr,unsigned long data)
+{
+ unsigned long *p=(unsigned long *)addr;
+ *p=data;
+}
+
+typedef struct {
+ unsigned short boardtype; /* Board revision and Population Options */
+ unsigned char cal; /* cas Latency 0:CAL=2 1:CAL=3 */
+ unsigned char rcd; /* ras to cas delay 0:<25ns 1:<50ns*/
+ unsigned char wrec; /* write recovery 0:<25ns 1:<50ns */
+ unsigned char pr; /* Precharge Command Time 0:<25ns 1:<50ns */
+ unsigned char rc; /* Auto Refresh to Active Time 0:<75ns 1:<100ns */
+ unsigned char sz; /* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */
+} sdram_t;
+
+const sdram_t sdram_table[] = {
+ { 0x0000, /* PATI Rev A, 16MByte -1 Board */
+ 1, /* Case Latenty = 3 */
+ 0, /* ras to cas delay 0 (20ns) */
+ 0, /* write recovery 0:<25ns 1:<50ns*/
+ 0, /* Precharge Command Time 0 (20ns) */
+ 0, /* Auto Refresh to Active Time 0 (68) */
+ 2 /* log binary => Size 2 = 16MByte, 1=8 */
+ },
+ { 0xffff, /* terminator */
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff,
+ 0xff }
+};
+
+
+extern int mem_test (unsigned long start, unsigned long ramsize, int quiet);
+extern void mem_test_reloc(void);
+
+/*
+ * Get RAM size.
+ */
+long int initdram(int board_type)
+{
+ unsigned char board_rev;
+ unsigned long reg;
+ unsigned long lmr;
+ int i,timeout;
+
+#if defined(SDRAM_DEBUG)
+ reg=in32(PLD_CONFIG_BASE+PLD_PART_ID);
+ puts("\n\nSYSTEM part 0x"); write_4hex(SYSCNTR_PART(reg));
+ puts(" Vers 0x"); write_4hex(SYSCNTR_ID(reg));
+ puts("\nSDRAM part 0x"); write_4hex(SDRAM_PART(reg));
+ puts(" Vers 0x"); write_4hex(SDRAM_ID(reg));
+ reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+ puts("\nBoard rev. 0x"); write_4hex(SYSCNTR_BREV(reg));
+ putc('\n');
+#endif
+ reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+ board_rev=(unsigned char)(SYSCNTR_BREV(reg));
+ i=0;
+ while(1) {
+ if(sdram_table[i].boardtype==0xffff) {
+ puts("ERROR, found no table for Board 0x");
+ write_hex(board_rev);
+ while(1);
+ }
+ if(sdram_table[i].boardtype==(unsigned char)board_rev)
+ break;
+ i++;
+ }
+ /* Set CAL, RCD, WREQ, PR and RC Bits */
+#if defined(SDRAM_DEBUG)
+ puts("Set CAL, RCD, WREQ, PR and RC Bits\n");
+#endif
+ /* mask bits */
+ reg &= ~(SET_REG_BIT(1,SDRAM_CAL) | SET_REG_BIT(1,SDRAM_RCD) | SET_REG_BIT(1,SDRAM_WREQ) |
+ SET_REG_BIT(1,SDRAM_PR) | SET_REG_BIT(1,SDRAM_RC) | SET_REG_BIT(1,SDRAM_LMR) |
+ SET_REG_BIT(1,SDRAM_IIP) | SET_REG_BIT(1,SDRAM_RES0));
+ /* set bits */
+ reg |= (SET_REG_BIT(sdram_table[i].cal,SDRAM_CAL) |
+ SET_REG_BIT(sdram_table[i].rcd,SDRAM_RCD) |
+ SET_REG_BIT(sdram_table[i].wrec,SDRAM_WREQ) |
+ SET_REG_BIT(sdram_table[i].pr,SDRAM_PR) |
+ SET_REG_BIT(sdram_table[i].rc,SDRAM_RC));
+
+ out32(PLD_CONFIG_BASE+PLD_BOARD_TIMING,reg);
+ /* step 2 set IIP */
+#if defined(SDRAM_DEBUG)
+ puts("step 2 set IIP\n");
+#endif
+ /* step 2 set IIP */
+ reg |= SET_REG_BIT(1,SDRAM_IIP);
+ timeout=0;
+ while (timeout!=0xffff) {
+ __asm__ volatile("eieio");
+ reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+ if((reg & SET_REG_BIT(1,SDRAM_IIP))==0)
+ break;
+ timeout++;
+ udelay(1);
+ }
+ /* wait for at least 8 refresh */
+ udelay(1000);
+ /* set LMR */
+ reg |= SET_REG_BIT(1,SDRAM_LMR);
+ out32(PLD_CONFIG_BASE+PLD_BOARD_TIMING,reg);
+ __asm__ volatile("eieio");
+ lmr=0x00000002; /* sequential burst 4 data */
+ if(sdram_table[i].cal==1)
+ lmr|=0x00000030; /* cal = 3 */
+ else
+ lmr|=0000000020; /* cal = 2 */
+ /* rest standard operation programmed write burst length */
+ /* we have a x32 bit bus to the SDRAM, so shift the addr with 2 */
+ lmr<<=2;
+ in32(CFG_SDRAM_BASE + lmr);
+ /* ok, we're done, return SDRAM size */
+ return ((0x400000 << sdram_table[i].sz)); /* log2 value of 4MByte */
+}
+
+
+void set_flash_vpp(int ext_vpp, int ext_wp, int int_vpp)
+{
+ unsigned long reg;
+ reg=in32(PLD_CONF_REG2+PLD_CONFIG_BASE);
+ reg &= ~(SET_REG_BIT(1,SYSCNTR_CPU_VPP) |
+ SET_REG_BIT(1,SYSCNTR_FL_VPP) |
+ SET_REG_BIT(1,SYSCNTR_FL_WP));
+
+ reg |= (SET_REG_BIT(int_vpp,SYSCNTR_CPU_VPP) |
+ SET_REG_BIT(ext_vpp,SYSCNTR_FL_VPP) |
+ SET_REG_BIT(ext_wp,SYSCNTR_FL_WP));
+ out32(PLD_CONF_REG2+PLD_CONFIG_BASE,reg);
+ udelay(100);
+}
+
+
+void show_pld_regs(void)
+{
+ unsigned long reg,reg1;
+ reg=in32(PLD_CONFIG_BASE+PLD_PART_ID);
+ printf("\nSYSTEM part %ld, Vers %ld\n",SYSCNTR_PART(reg),SYSCNTR_ID(reg));
+ printf("SDRAM part %ld, Vers %ld\n",SDRAM_PART(reg),SDRAM_ID(reg));
+ reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+ printf("Board rev. %c\n",(char) (SYSCNTR_BREV(reg)+'A'));
+ printf("Waitstates %ld\n",GET_SYSCNTR_FLWAIT(reg));
+ printf("SDRAM: CAL=%ld RCD=%ld WREQ=%ld PR=%ld\n RC=%ld LMR=%ld IIP=%ld\n",
+ GET_REG_BIT(reg,SDRAM_CAL),GET_REG_BIT(reg,SDRAM_RCD),
+ GET_REG_BIT(reg,SDRAM_WREQ),GET_REG_BIT(reg,SDRAM_PR),
+ GET_REG_BIT(reg,SDRAM_RC),GET_REG_BIT(reg,SDRAM_LMR),
+ GET_REG_BIT(reg,SDRAM_IIP));
+ reg=in32(PLD_CONFIG_BASE+PLD_CONF_REG1);
+ reg1=in32(PLD_CONFIG_BASE+PLD_CONF_REG2);
+ printf("HW Config: FLAG=%ld IP=%ld index=%ld PRPM=%ld\n ICW=%ld ISB=%ld BDIS=%ld PCIM=%ld\n",
+ GET_REG_BIT(reg,SYSCNTR_FLAG),GET_REG_BIT(reg,SYSCNTR_IP),
+ GET_SYSCNTR_BOOTIND(reg),GET_REG_BIT(reg,SYSCNTR_PRM),
+ GET_REG_BIT(reg,SYSCNTR_ICW),GET_SYSCNTR_ISB(reg),
+ GET_REG_BIT(reg1,SYSCNTR_BDIS),GET_REG_BIT(reg1,SYSCNTR_PCIM));
+ printf("Switches: MUX=%ld PCI_DIS=%ld Boot_EN=%ld Config=%ld\n",GET_SDRAM_MUX(reg),
+ GET_REG_BIT(reg,SDRAM_PDIS),GET_REG_BIT(reg1,SYSCNTR_BOOTEN),
+ GET_SYSCNTR_CFG(reg1));
+ printf("Misc: RIP=%ld CPU_VPP=%ld FLSH_VPP=%ld FLSH_WP=%ld\n\n",
+ GET_REG_BIT(reg,SDRAM_RIP),GET_REG_BIT(reg1,SYSCNTR_CPU_VPP),
+ GET_REG_BIT(reg1,SYSCNTR_FL_VPP),GET_REG_BIT(reg1,SYSCNTR_FL_WP));
+}
+
+
+/****************************************************************
+ * Setting IOs
+ * -----------
+ * GPIO6 is User LED1
+ * GPIO7 is Interrupt PLX (Output)
+ * GPIO5 is User LED0
+ * GPIO2 is PLX USERi (Output)
+ * GPIO1 is PLX Interrupt (Input)
+ ****************************************************************/
+ void init_ios(void)
+ {
+ volatile immap_t * immr = (immap_t *) CFG_IMMR;
+ volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
+ unsigned long reg;
+ reg=sysconf->sc_sgpiocr; /* Data direction register */
+ reg &= ~0x67000000;
+ reg |= 0x27000000; /* set outpupts */
+ sysconf->sc_sgpiocr=reg; /* Data direction register */
+ reg=sysconf->sc_sgpiodt2; /* Data register */
+ /* set output to 0 */
+ reg &= ~0x27000000;
+ /* set IRQ and USERi to 1 */
+ reg |= 0x28000000;
+ sysconf->sc_sgpiodt2=reg; /* Data register */
+}
+
+void user_led0(int led_on)
+{
+ volatile immap_t * immr = (immap_t *) CFG_IMMR;
+ volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
+ unsigned long reg;
+ reg=sysconf->sc_sgpiodt2; /* Data register */
+ if(led_on) /* set output to 1 */
+ reg |= 0x04000000;
+ else
+ reg &= ~0x04000000;
+ sysconf->sc_sgpiodt2=reg; /* Data register */
+}
+
+void user_led1(int led_on)
+{
+ volatile immap_t * immr = (immap_t *) CFG_IMMR;
+ volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
+ unsigned long reg;
+ reg=sysconf->sc_sgpiodt2; /* Data register */
+ if(led_on) /* set output to 1 */
+ reg |= 0x02000000;
+ else
+ reg &= ~0x02000000;
+ sysconf->sc_sgpiodt2=reg; /* Data register */
+}
+
+
+/****************************************************************
+ * Last Stage Init
+ ****************************************************************/
+int last_stage_init (void)
+{
+ mem_test_reloc();
+ init_ios();
+ return 0;
+}
+
+/****************************************************************
+ * Check the board
+ ****************************************************************/
+
+#define BOARD_NAME "PATI"
+
+int checkboard (void)
+{
+ unsigned char s[50];
+ unsigned long reg;
+ char rev;
+ int i;
+
+ puts ("\nBoard: ");
+ reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+ rev=(char)(SYSCNTR_BREV(reg)+'A');
+ i = getenv_r ("serial#", s, 32);
+ if ((i == -1)) {
+ puts ("### No HW ID - assuming " BOARD_NAME);
+ printf(" Rev. %c\n",rev);
+ }
+ else {
+ s[sizeof(BOARD_NAME)-1] = 0;
+ printf ("%s-1 Rev %c SN: %s\n", s,rev,
+ &s[sizeof(BOARD_NAME)]);
+ }
+ set_flash_vpp(1,0,0); /* set Flash VPP */
+ return 0;
+}
+
+
+#ifdef CFG_PCI_CON_DEVICE
+/************************************************************************
+ * PCI Communication
+ *
+ * Alive (Pinging):
+ * ----------------
+ * PCI Host sends message ALIVE, Local acknowledges with ALIVE
+ *
+ * PCI_CON console over PCI:
+ * -------------------------
+ * Local side:
+ * - uses PCI9056_LOC_TO_PCI_DBELL register to signal that
+ * data is avaible (PCIMSG_CONN)
+ * - uses PCI9056_MAILBOX1 to send data
+ * - uses PCI9056_MAILBOX0 to receive data
+ * PCI side:
+ * - uses PCI9056_PCI_TO_LOC_DBELL register to signal that
+ * data is avaible (PCIMSG_CONN)
+ * - uses PCI9056_MAILBOX0 to send data
+ * - uses PCI9056_MAILBOX1 to receive data
+ *
+ * How it works:
+ * Send:
+ * - check if PCICON_TRANSMIT_REG is empty
+ * - write data or'ed with 0x80000000 into the PCICON_TRANSMIT_REG
+ * - write PCIMSG_CONN into the PCICON_DBELL_REG to signal a data
+ * is waiting
+ * Receive:
+ * - get an interrupt via the PCICON_ACK_REG register message
+ * PCIMSG_CONN
+ * - write the data from the PCICON_RECEIVE_REG into the receive
+ * buffer and if the receive buffer is not full, clear the
+ * PCICON_RECEIVE_REG (this allows the counterpart to write more data)
+ * - Clear the interrupt by writing 0xFFFFFFFF to the PCICON_ACK_REG
+ *
+ * The PCICON_RECEIVE_REG must be cleared by the routine which reads
+ * the receive buffer if the buffer is not full any more
+ *
+ */
+
+#undef PCI_CON_DEBUG
+
+#ifdef PCI_CON_DEBUG
+#define PCI_CON_PRINTF(fmt,args...) serial_printf (fmt ,##args)
+#else
+#define PCI_CON_PRINTF(fmt,args...)
+#endif
+
+
+/*********************************************************
+ * we work only with a receive buffer on eiter side.
+ * Transmit buffer is free, if mailbox is cleared.
+ * Transmit character is or'ed with 0x80000000
+ * PATI receive register MAILBOX0
+ * PATI transmit register MAILBOX1
+ *********************************************************/
+#define PCICON_RECEIVE_REG PCI9056_MAILBOX0
+#define PCICON_TRANSMIT_REG PCI9056_MAILBOX1
+#define PCICON_DBELL_REG PCI9056_LOC_TO_PCI_DBELL
+#define PCICON_ACK_REG PCI9056_PCI_TO_LOC_DBELL
+
+
+#define PCIMSG_ALIVE 0x1
+#define PCIMSG_CONN 0x2
+#define PCIMSG_DISC 0x3
+#define PCIMSG_CON_DATA 0x5
+
+
+#define PCICON_GET_REG(x) (in32(x + PCI_CONFIG_BASE))
+#define PCICON_SET_REG(x,y) (out32(x + PCI_CONFIG_BASE,y))
+#define PCICON_TX_FLAG 0x80000000
+
+
+#define REC_BUFFER_SIZE 0x100
+int recbuf[REC_BUFFER_SIZE];
+static int r_ptr = 0;
+int w_ptr;
+device_t pci_con_dev;
+int conn=0;
+int buff_full=0;
+
+void pci_con_put_it(const char c)
+{
+ /* Test for completition */
+ unsigned long reg;
+ do {
+ reg=PCICON_GET_REG(PCICON_TRANSMIT_REG);
+ }while(reg);
+ reg=PCICON_TX_FLAG + c;
+ PCICON_SET_REG(PCICON_TRANSMIT_REG,reg);
+ PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_CON_DATA);
+}
+
+void pci_con_putc(const char c)
+{
+ pci_con_put_it(c);
+ if(c == '\n')
+ pci_con_put_it('\r');
+}
+
+
+int pci_con_getc(void)
+{
+ int res;
+ int diff;
+ while(r_ptr==(volatile int)w_ptr);
+ res=recbuf[r_ptr++];
+ if(r_ptr==REC_BUFFER_SIZE)
+ r_ptr=0;
+ if(w_ptr<r_ptr)
+ diff=r_ptr+REC_BUFFER_SIZE-w_ptr;
+ else
+ diff=r_ptr-w_ptr;
+ if((diff<(REC_BUFFER_SIZE-4)) && buff_full) {
+ /* clear Mail box */
+ buff_full=0;
+ PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+ }
+ return res;
+}
+
+int pci_con_tstc(void)
+{
+ if(r_ptr==(volatile int)w_ptr)
+ return 0;
+ return 1;
+}
+
+void pci_con_puts (const char *s)
+{
+ while (*s) {
+ pci_con_putc(*s);
+ ++s;
+ }
+}
+
+void pci_con_init (void)
+{
+ w_ptr = 0;
+ r_ptr = 0;
+ PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+ conn=1;
+}
+
+/*******************************************
+ * IRQ routine
+ ******************************************/
+int pci_dorbell_irq(void)
+{
+ unsigned long reg,data;
+ int diff;
+ reg=PCICON_GET_REG(PCI9056_INT_CTRL_STAT);
+ PCI_CON_PRINTF(" PCI9056_INT_CTRL_STAT = %08lX\n",reg);
+ if(reg & (1<<20) ) {
+ /* read doorbell */
+ reg=PCICON_GET_REG(PCICON_ACK_REG);
+ switch(reg) {
+ case PCIMSG_ALIVE:
+ PCI_CON_PRINTF(" Alive\n");
+ PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_ALIVE);
+ break;
+ case PCIMSG_CONN:
+ PCI_CON_PRINTF(" Conn %d",conn);
+ w_ptr = 0;
+ r_ptr = 0;
+ buff_full=0;
+ PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+ conn=1;
+ PCI_CON_PRINTF(" ... %d\n",conn);
+ break;
+ case PCIMSG_CON_DATA:
+ data=PCICON_GET_REG(PCICON_RECEIVE_REG);
+ recbuf[w_ptr++]=(int)(data&0xff);
+ PCI_CON_PRINTF(" Data Console %lX, %X %d %d %X\n",data,((int)(data&0xFF)),
+ r_ptr,w_ptr,recbuf[w_ptr-1]);
+ if(w_ptr==REC_BUFFER_SIZE)
+ w_ptr=0;
+ if(w_ptr<r_ptr)
+ diff=r_ptr+REC_BUFFER_SIZE-w_ptr;
+ else
+ diff=r_ptr-w_ptr;
+ if(diff>(REC_BUFFER_SIZE-4))
+ buff_full=1;
+ else
+ /* clear Mail box */
+ PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+ break;
+ default:
+ serial_printf(" PCI9056_PCI_TO_LOC_DBELL = %08lX\n",reg);
+ }
+ /* clear IRQ */
+ PCICON_SET_REG(PCICON_ACK_REG,~0L);
+ }
+ return 0;
+}
+
+void pci_con_connect(void)
+{
+ unsigned long reg;
+ conn=0;
+ reg=PCICON_GET_REG(PCI9056_INT_CTRL_STAT);
+ /* default 0x0f010180 */
+ reg &= 0xff000000;
+ reg |= 0x00030000; /* enable local dorbell */
+ reg |= 0x00000300; /* enable PCI dorbell */
+ PCICON_SET_REG(PCI9056_INT_CTRL_STAT , reg);
+ irq_install_handler (0x2, (interrupt_handler_t *) pci_dorbell_irq,NULL);
+ memset (&pci_con_dev, 0, sizeof (pci_con_dev));
+ strcpy (pci_con_dev.name, "pci_con");
+ pci_con_dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+ pci_con_dev.putc = pci_con_putc;
+ pci_con_dev.puts = pci_con_puts;
+ pci_con_dev.getc = pci_con_getc;
+ pci_con_dev.tstc = pci_con_tstc;
+ device_register (&pci_con_dev);
+ printf("PATI ready for PCI connection, type ctrl-c for exit\n");
+ do {
+ udelay(10);
+ if((volatile int)conn)
+ break;
+ if(ctrlc()) {
+ irq_free_handler(0x2);
+ return;
+ }
+ }while(1);
+ console_assign(stdin,"pci_con");
+ console_assign(stderr,"pci_con");
+ console_assign(stdout,"pci_con");
+}
+
+void pci_con_disc(void)
+{
+ console_assign(stdin,"serial");
+ console_assign(stderr,"serial");
+ console_assign(stdout,"serial");
+ PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_DISC);
+ /* reconnection */
+ irq_free_handler(0x02);
+ pci_con_connect();
+}
+#endif /* #ifdef CFG_PCI_CON_DEVICE */
+
+/*
+ * Absolute environment address for linker file.
+ */
+GEN_ABS(env_start, CFG_ENV_OFFSET + CFG_FLASH_BASE);
diff --git a/board/mpl/pati/pati.h b/board/mpl/pati/pati.h
new file mode 100644
index 0000000..d521772
--- /dev/null
+++ b/board/mpl/pati/pati.h
@@ -0,0 +1,440 @@
+/*
+ * (C) Copyright 2003
+ * Denis Peter, d.peter@mpl.ch
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/************************************************************************
+ * MACROS and register definitions for PATI Registers
+ ************************************************************************/
+#ifndef __PATI_H_
+#define __PATI_H_ 1
+
+#define PLD_PART_ID 0x0
+#define PLD_BOARD_TIMING 0x4
+#define PLD_CONF_REG1 0x8
+#define PLD_CONF_REG2 0xC
+#define PLD_CONF_RES 0x10
+
+#define SET_REG_BIT(y,x) (y<<(31-x))
+#define GET_REG_BIT(y,x) ((y>>(31-x)) & 0x1L)
+
+/* SDRAM Controller PLD_PART_ID */
+/* 9 10 11 12 13 14 19 31 */
+#define SDRAM_PART3 9
+#define SDRAM_PART2 10
+#define SDRAM_PART1 11
+#define SDRAM_PART0 12
+#define SDRAM_ID3 13
+#define SDRAM_ID2 14
+#define SDRAM_ID1 19
+#define SDRAM_ID0 31
+
+#define SDRAM_PART(x) ( \
+ (GET_REG_BIT(x,SDRAM_PART3)<<3) |\
+ (GET_REG_BIT(x,SDRAM_PART2)<<2) |\
+ (GET_REG_BIT(x,SDRAM_PART1)<<1) |\
+ (GET_REG_BIT(x,SDRAM_PART0)))
+
+#define SDRAM_ID(x) ( \
+ (GET_REG_BIT(x,SDRAM_ID3)<<3) |\
+ (GET_REG_BIT(x,SDRAM_ID2)<<2) |\
+ (GET_REG_BIT(x,SDRAM_ID1)<<1) |\
+ (GET_REG_BIT(x,SDRAM_ID0)))
+
+/* System Controller */
+/* 0 1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_PART4 0
+#define SYSCNTR_PART3 1
+#define SYSCNTR_PART2 3
+#define SYSCNTR_PART1 4
+#define SYSCNTR_PART0 5
+#define SYSCNTR_ID4 16
+#define SYSCNTR_ID3 20
+#define SYSCNTR_ID2 28
+#define SYSCNTR_ID1 29
+#define SYSCNTR_ID0 30
+
+#define SYSCNTR_PART(x) ( \
+ (GET_REG_BIT(x,SYSCNTR_PART4)<<4) |\
+ (GET_REG_BIT(x,SYSCNTR_PART3)<<3) |\
+ (GET_REG_BIT(x,SYSCNTR_PART2)<<2) |\
+ (GET_REG_BIT(x,SYSCNTR_PART1)<<1) |\
+ (GET_REG_BIT(x,SYSCNTR_PART0)))
+
+#define SYSCNTR_ID(x) ( \
+ (GET_REG_BIT(x,SYSCNTR_ID4)<<4) |\
+ (GET_REG_BIT(x,SYSCNTR_ID3)<<3) |\
+ (GET_REG_BIT(x,SYSCNTR_ID2)<<2) |\
+ (GET_REG_BIT(x,SYSCNTR_ID1)<<1) |\
+ (GET_REG_BIT(x,SYSCNTR_ID0)))
+
+/* SDRAM Controller PLD_BOARD_TIMING */
+/* 9 10 11 12 13 14 19 31 */
+#define SDRAM_CAL 9
+#define SDRAM_RCD 10
+#define SDRAM_WREQ 11
+#define SDRAM_PR 12
+#define SDRAM_RC 13
+#define SDRAM_LMR 14
+#define SDRAM_IIP 19
+#define SDRAM_RES0 31
+/* System Controller */
+/* 0 1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_BREV0 0
+#define SYSCNTR_BREV1 1
+#define SYSCNTR_BREV2 3
+#define SYSCNTR_BREV3 4
+#define SYSCNTR_RES0 5
+#define SYSCNTR_RES1 16
+#define SYSCNTR_RES2 20
+#define SYSCNTR_FLWAIT2 28
+#define SYSCNTR_FLWAIT1 29
+#define SYSCNTR_FLWAIT0 30
+
+#define SYSCNTR_BREV(x) ( \
+ (GET_REG_BIT(x,SYSCNTR_BREV3)<<3) |\
+ (GET_REG_BIT(x,SYSCNTR_BREV2)<<2) |\
+ (GET_REG_BIT(x,SYSCNTR_BREV1)<<1) |\
+ (GET_REG_BIT(x,SYSCNTR_BREV0)))
+
+#define GET_SYSCNTR_FLWAIT(x) ( \
+ (GET_REG_BIT(x,SYSCNTR_FLWAIT2)<<2) |\
+ (GET_REG_BIT(x,SYSCNTR_FLWAIT1)<<1) |\
+ (GET_REG_BIT(x,SYSCNTR_FLWAIT0)))
+
+#define SET_SYSCNTR_FLWAIT(x) ( \
+ (SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_FLWAIT2)) |\
+ (SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_FLWAIT1)) |\
+ (SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_FLWAIT0)))
+
+/* SDRAM Controller REG 2*/
+/* 9 10 11 12 13 14 19 31 */
+#define SDRAM_MUX0 9
+#define SDRAM_MUX1 10
+#define SDRAM_PDIS 11
+#define SDRAM_RES1 12
+#define SDRAM_RES2 13
+#define SDRAM_RES3 14
+#define SDRAM_RES4 19
+#define SDRAM_RIP 31
+
+#define GET_SDRAM_MUX(x) ( \
+ (GET_REG_BIT(x,SDRAM_MUX1)<<1)| \
+ (GET_REG_BIT(x,SDRAM_MUX0)))
+
+
+/* System Controller */
+/* 0 1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_FLAG 0
+#define SYSCNTR_IP 1
+#define SYSCNTR_BIND2 3
+#define SYSCNTR_BIND1 4
+#define SYSCNTR_BIND0 5
+#define SYSCNTR_PRM 16
+#define SYSCNTR_ICW 20
+#define SYSCNTR_ISB2 28
+#define SYSCNTR_ISB1 29
+#define SYSCNTR_ISB0 30
+
+#define GET_SYSCNTR_BOOTIND(x) ( \
+ (GET_REG_BIT(x,SYSCNTR_BIND2)<<2) |\
+ (GET_REG_BIT(x,SYSCNTR_BIND1)<<1) |\
+ (GET_REG_BIT(x,SYSCNTR_BIND0)))
+
+#define SET_SYSCNTR_BOOTIND(x) ( \
+ (SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_BIND2)) |\
+ (SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_BIND1))| \
+ (SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_BIND0)))
+
+#define GET_SYSCNTR_ISB(x) ( \
+ (GET_REG_BIT(x,SYSCNTR_ISB2)<<2)| \
+ (GET_REG_BIT(x,SYSCNTR_ISB1)<<1)| \
+ (GET_REG_BIT(x,SYSCNTR_ISB0)))
+
+#define SET_SYSCNTR_ISB(x) ( \
+ (SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_ISB2))| \
+ (SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_ISB))| \
+ (SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_ISB0)))
+
+/* SDRAM Controller REG 3*/
+/* 9 10 11 12 13 14 19 31 */
+#define SDRAM_RES5 9
+#define SDRAM_CFG1 10
+#define SDRAM_CFG2 11
+#define SDRAM_CFG3 12
+#define SDRAM_RES6 13
+#define SDRAM_CFG5 14
+#define SDRAM_CFG6 19
+#define SDRAM_RES7 31
+
+#define GET_SDRAM_CFG(x) ( \
+ (GET_REG_BIT(x,SDRAM_CFG6)<<4) |\
+ (GET_REG_BIT(x,SDRAM_CFG5)<<3) |\
+ (GET_REG_BIT(x,SDRAM_CFG3)<<2) |\
+ (GET_REG_BIT(x,SDRAM_CFG2)<<1) |\
+ (GET_REG_BIT(x,SDRAM_CFG1)))
+
+/* System Controller */
+/* 0 1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_BDIS 0
+#define SYSCNTR_PCIM 1
+#define SYSCNTR_CFG0 3
+#define SYSCNTR_CFG1 4
+#define SYSCNTR_CFG2 5
+#define SYSCNTR_CFG3 16
+#define SYSCNTR_BOOTEN 20
+#define SYSCNTR_CPU_VPP 28
+#define SYSCNTR_FL_VPP 29
+#define SYSCNTR_FL_WP 30
+
+#define GET_SYSCNTR_CFG(x) ( \
+ (GET_REG_BIT(x,SYSCNTR_CFG3)<<3)| \
+ (GET_REG_BIT(x,SYSCNTR_CFG2)<<2)| \
+ (GET_REG_BIT(x,SYSCNTR_CFG1)<<1)| \
+ (GET_REG_BIT(x,SYSCNTR_CFG0)))
+
+
+/***************************************************************
+ * MISC Defines
+ ***************************************************************/
+
+#define PCI_VENDOR_ID_MPL 0x18E6
+#define PCI_DEVICE_ID_PATI 0x00DA
+
+#if defined(CONFIG_MIP405)
+#define PATI_FIRMWARE_START_OFFSET 0x00300000
+#define PATI_ISO_STRING "MEV-10084-001"
+#endif
+
+#define PATI_ENDIAN_MODE 0x3E
+
+/*******************************************
+ * PATI Mapping:
+ * -------------
+ * PCI Map:
+ * -------
+ * All addreses are mapped into the memory area
+ * (IO Area on some areas may also be possible)
+ * - pci_cfg_mem_base: fixed address to the PLX config area size 512Bytes
+ * - pci_space0_addr: configurable
+ * - pci_space1_addr configurable
+ *
+ * Local Map:
+ * ----------
+ * Local addresses (Remap)
+ * - SDRAM 0x06000000 Size 16MByte mask 0xff000000
+ * - EPLD CFG 0x07000000 Size 512Bytes
+ * - FLASH 0x03000000 Size up to 8MByte
+ * - CPU 0x01000000 Size 4MByte (only accessable if special configured)
+ *
+ * Implemention:
+ * -------------
+ * To prevent using large resources reservation on the host following
+ * PCI mapping is choosed:
+ * - pci_cfg_mem_base: fixed address to the PLX config area size 512Bytes
+ * - pci_space0_addr: configured to the EPLD Config Area size 256Bytes
+ * - pci_space1_addr: configured to the SDRAM Area size 1MBytes, this
+ * space is used to switch between SDRAM, Flash and CPU
+ *
+ */
+
+/* Attribute definitions */
+#define PATI_BUS_SIZE_8 0
+#define PATI_BUS_SIZE_16 1
+#define PATI_BUS_SIZE_32 3
+
+#define PATI_SPACE0_MASK (0xFEFFFE00) /* Mask Attributes */
+#define PATI_SPACE1_MASK (0x00000000) /* Mask Attributes */
+
+#define PATI_EXTRA_LONG_EEPROM 1
+
+#define SPACE0_TA_ENABLE (1<<6)
+#define SPACE1_TA_ENABLE (1<<6)
+
+/* Config Area */
+#define PATI_LOC_CFG_ADDR 0x07000000 /* Local Address */
+#define PATI_LOC_CFG_MASK 0xFFFFFF00 /* 256 Bytes */
+/* Attributes */
+#define PATI_LOC_CFG_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */
+#define PATI_LOC_CFG_BURST 0 /* No Burst */
+#define PATI_LOC_CFG_NO_PREFETCH 1 /* No Prefetch */
+#define PATI_LOC_CFG_TA_ENABLE 1 /* Enable TA */
+
+#define PATI_LOC_CFG_SPACE0_ATTR ( \
+ PATI_LOC_CFG_BUS_SIZE | \
+ (PATI_LOC_CFG_TA_ENABLE << 6) | \
+ (PATI_LOC_CFG_NO_PREFETCH << 8) | \
+ (PATI_LOC_CFG_BURST << 24) | \
+ (PATI_EXTRA_LONG_EEPROM << 25))
+
+/* should never be used */
+#define PATI_LOC_CFG_SPACE1_ATTR ( \
+ PATI_LOC_CFG_BUS_SIZE | \
+ (PATI_LOC_CFG_TA_ENABLE << 6) | \
+ (PATI_LOC_CFG_NO_PREFETCH << 9) | \
+ (PATI_LOC_CFG_BURST << 8))
+
+
+/* SDRAM Area */
+#define PATI_LOC_SDRAM_ADDR 0x06000000 /* Local Address */
+#define PATI_LOC_SDRAM_MASK 0xFFF00000 /* 1MByte */
+/* Attributes */
+#define PATI_LOC_SDRAM_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */
+#define PATI_LOC_SDRAM_BURST 0 /* No Burst */
+#define PATI_LOC_SDRAM_NO_PREFETCH 0 /* Prefetch */
+#define PATI_LOC_SDRAM_TA_ENABLE 1 /* Enable TA */
+
+/* should never be used */
+#define PATI_LOC_SDRAM_SPACE0_ATTR ( \
+ PATI_LOC_SDRAM_BUS_SIZE | \
+ (PATI_LOC_SDRAM_TA_ENABLE << 6) | \
+ (PATI_LOC_SDRAM_NO_PREFETCH << 8) | \
+ (PATI_LOC_SDRAM_BURST << 24) | \
+ (PATI_EXTRA_LONG_EEPROM << 25))
+
+#define PATI_LOC_SDRAM_SPACE1_ATTR ( \
+ PATI_LOC_SDRAM_BUS_SIZE | \
+ (PATI_LOC_SDRAM_TA_ENABLE << 6) | \
+ (PATI_LOC_SDRAM_NO_PREFETCH << 9) | \
+ (PATI_LOC_SDRAM_BURST << 8))
+
+
+/* Flash Area */
+#define PATI_LOC_FLASH_ADDR 0x03000000 /* Local Address */
+#define PATI_LOC_FLASH_MASK 0xFFF00000 /* 1MByte */
+/* Attributes */
+#define PATI_LOC_FLASH_BUS_SIZE PATI_BUS_SIZE_16 /* 16 Bit */
+#define PATI_LOC_FLASH_BURST 0 /* No Burst */
+#define PATI_LOC_FLASH_NO_PREFETCH 1 /* No Prefetch */
+#define PATI_LOC_FLASH_TA_ENABLE 1 /* Enable TA */
+
+/* should never be used */
+#define PATI_LOC_FLASH_SPACE0_ATTR ( \
+ PATI_LOC_FLASH_BUS_SIZE | \
+ (PATI_LOC_FLASH_TA_ENABLE << 6) | \
+ (PATI_LOC_FLASH_NO_PREFETCH << 8) | \
+ (PATI_LOC_FLASH_BURST << 24) | \
+ (PATI_EXTRA_LONG_EEPROM << 25))
+
+#define PATI_LOC_FLASH_SPACE1_ATTR ( \
+ PATI_LOC_FLASH_BUS_SIZE | \
+ (PATI_LOC_FLASH_TA_ENABLE << 6) | \
+ (PATI_LOC_FLASH_NO_PREFETCH << 9) | \
+ (PATI_LOC_FLASH_BURST << 8))
+
+
+/* CPU Area */
+#define PATI_LOC_CPU_ADDR 0x01000000 /* Local Address */
+#define PATI_LOC_CPU_MASK 0xFFF00000 /* 1Mbyte */
+/* Attributes */
+#define PATI_LOC_CPU_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */
+#define PATI_LOC_CPU_BURST 0 /* No Burst */
+#define PATI_LOC_CPU_NO_PREFETCH 1 /* No Prefetch */
+#define PATI_LOC_CPU_TA_ENABLE 1 /* Enable TA */
+
+/* should never be used */
+#define PATI_LOC_CPU_SPACE0_ATTR ( \
+ PATI_LOC_CPU_BUS_SIZE | \
+ (PATI_LOC_CPU_TA_ENABLE << 6) | \
+ (PATI_LOC_CPU_NO_PREFETCH << 8) | \
+ (PATI_LOC_CPU_BURST << 24) | \
+ (PATI_EXTRA_CPU_EEPROM << 25))
+
+#define PATI_LOC_CPU_SPACE1_ATTR ( \
+ PATI_LOC_CPU_BUS_SIZE | \
+ (PATI_LOC_CPU_TA_ENABLE << 6) | \
+ (PATI_LOC_CPU_NO_PREFETCH << 9) | \
+ (PATI_LOC_CPU_BURST << 8))
+
+/***************************************************
+ * Hardware Config word definition
+ ***************************************************/
+#define BOOT_EXT_FLASH 0x00000000
+#define BOOT_INT_FLASH 0x00000004
+#define BOOT_FROM_PCI 0x00000006
+#define BOOT_FROM_SDRAM 0x00000005
+
+#define ENABLE_INT_ARB 0x00000008
+
+#define INITIAL_IRQ_PREF 0x00000010
+
+#define INITIAL_MEM_0M 0x00000000
+#define INITIAL_MEM_4M 0x00000080
+#define INITIAL_MEM_8M 0x00000040
+#define INITIAL_MEM_12M 0x000000C0
+#define INITIAL_MEM_16M 0x00000020
+#define INITIAL_MEM_20M 0x000000A0
+#define INITIAL_MEM_24M 0x00000060
+#define INITIAL_MEM_28M 0x000000E0
+/* CONF */
+#define INTERNAL_HWCONF 0x00000100
+/* PRPM */
+#define LOCAL_CPU_SLAVE 0x00000200
+/* BDIS */
+#define DISABLE_MEM_CNTR 0x00000400
+/* PCIM */
+#define PCI_MASTER_ONLY 0x00000800
+
+
+#define PATI_HW_START ((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF))
+#define PATI_HW_PCI_ONLY ((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY))
+#define PATI_HW_CPU_ACC ((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY))
+#define PATI_HW_CPU_SLAVE ((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY | LOCAL_CPU_SLAVE))
+
+/***************************************************
+ * Direct Master Config
+ ***************************************************/
+#define PATI_DMASTER_PCI_ADDR 0x01000000
+#define PATI_BUS_MASTER 1
+
+
+#define PATI_DMASTER_MASK 0xFFF00000 /* 1MByte */
+#define PATI_DMASTER_ADDR 0x01000000 /* Local Address */
+
+#define PATI_DMASTER_MEMORY_EN 0x00000001 /* 0x00000001 */
+#define PATI_DMASTER_READ_AHEAD 0x00000004 /* 0x00000004 */
+#define PATI_DMASTER_READ_NOT_AHEAD 0x00000000 /* 0x00000004 */
+#define PATI_DMASTER_PRE_SIZE_CNTRL_0 0x00000000
+#define PATI_DMASTER_PRE_SIZE_CNTRL_4 0x00000008
+#define PATI_DMASTER_PRE_SIZE_CNTRL_8 0x00001000
+#define PATI_DMASTER_PRE_SIZE_CNTRL_16 0x00001008
+#define PATI_DMASTER_REL_PCI 0x00000000
+#define PATI_DMASTER_NOT_REL_PCI 0x00000010
+#define PATI_DMASTER_WR_INVAL 0x00000200
+#define PATI_DMASTER_NOT_WR_INVAL 0x00000000
+#define PATI_DMASTER_PRE_LIMIT 0x00000800
+#define PATI_DMASTER_PRE_CONT 0x00000000
+#define PATI_DMASTER_DELAY_WR_0 0x00000000
+#define PATI_DMASTER_DELAY_WR_4 0x00004000
+#define PATI_DMASTER_DELAY_WR_8 0x00008000
+#define PATI_DMASTER_DELAY_WR_16 0x0000C000
+
+#define PATI_DMASTER_PCI_ADDR_MASK 0xFFFF0000
+
+#define PATI_DMASTER_ATTR \
+ PATI_DMASTER_MEMORY_EN | \
+ PATI_DMASTER_READ_AHEAD | \
+ PATI_DMASTER_PRE_SIZE_CNTRL_4 | \
+ PATI_DMASTER_REL_PCI | \
+ PATI_DMASTER_NOT_WR_INVAL | \
+ PATI_DMASTER_PRE_LIMIT | \
+ PATI_DMASTER_DELAY_WR_0
+
+
+#endif /* #ifndef __PATI_H_ */
diff --git a/board/mpl/pati/pci_eeprom.h b/board/mpl/pati/pci_eeprom.h
new file mode 100644
index 0000000..9658808
--- /dev/null
+++ b/board/mpl/pati/pci_eeprom.h
@@ -0,0 +1,91 @@
+
+#ifndef __PCI_EEPROM_H_
+#define __PCI_EEPROM_H_ 1
+
+#include "pati.h"
+/******************************************************************************
+ * Eeprom Support
+ ******************************************************************************/
+/**********************************************
+* Definitions
+**********************************************/
+#define EE46_CMD_LEN 9 /* Bits in instructions */
+#define EE56_CMD_LEN 11 /* Bits in instructions */
+#define EE66_CMD_LEN 11 /* Bits in instructions */
+#define EE_READ 0x0180 /* 01 1000 0000 read instruction */
+#define EE_WRITE 0x0140 /* 01 0100 0000 write instruction */
+#define EE_WREN 0x0130 /* 01 0011 0000 write enable instruction */
+#define EE_WRALL 0x0110 /* 01 0001 0000 write all registers */
+#define EE_PRREAD 0x0180 /* 01 1000 0000 read address stored in Protect Register */
+#define EE_PRWRITE 0x0140 /* 01 0100 0000 write the address into PR */
+#define EE_WDS 0x0100 /* 01 0000 0000 write disable instruction */
+#define EE_PREN 0x0130 /* 01 0011 0000 protect enable instruction */
+#define EE_PRCLEAR 0x01FF /* 01 1111 1111 clear protect register instr */
+#define EE_PRDS 0x0100 /* 01 0000 0000 ONE TIME ONLY, permenant */
+
+/***************************************************
+ * EEPROM
+ ***************************************************/
+#define LOW_WORD(x) (((x) & 0xFFFF))
+#define HIGH_WORD(x) (((x) >> 16) & 0xFFFF)
+
+typedef struct pci_eeprom_t {
+ unsigned short offset;
+ unsigned short value;
+} pci_eeprom;
+
+static pci_eeprom pati_eeprom[] = {
+ { 0x00,PCI_DEVICE_ID_PATI }, /* PCI Device ID PCIIDR[31:16] */
+ { 0x02,PCI_VENDOR_ID_MPL }, /* PCI Vendor ID PCIIDR[15:0] */
+ { 0x04,PCI_CLASS_PROCESSOR_POWERPC }, /* PCI Class Code PCICCR[23:8] */
+ { 0x06,0x00BA }, /* PCI Class Code / PCI Revision ID PCICCR[7:0] / PCIREV[7:0] */
+ { 0x08,0x0007 }, /* PCI Maximum Latency / PCI Minimum Grant PCIMLR[7:0] / PCIMGR[7:0] */
+ { 0x0A,0x0100 }, /* PCI Interrupt Pin / PCI Interrupt Line PCIIPR[7:0] / PCIILR[7:0] */
+ { 0x0C,0x0000 }, /* MSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[31:16] */
+ { 0x0E,0x0000 }, /* LSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[15:0] */
+ { 0x10,0x0000 }, /* MSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[31:16] */
+ { 0x12,0x0000 }, /* LSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[15:0] */
+ { 0x14,HIGH_WORD(PATI_LOC_CFG_MASK) }, /* MSW of Direct Slave Local Address Space 0 Range LAS0RR[31:16] */
+ { 0x16,LOW_WORD(PATI_LOC_CFG_MASK) }, /* LSW of Direct Slave Local Address Space 0 Range LAS0RR[15:0] */
+ { 0x18,HIGH_WORD(PATI_LOC_CFG_ADDR) }, /* MSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[31:16] (CFG) */
+ { 0x1A,LOW_WORD(PATI_LOC_CFG_ADDR)|1 }, /* LSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[15:2, 0], Reserved [1] */
+ { 0x1C,0x0000 }, /* MSW of Mode/DMA Arbitration MARBR[31, 29:16] or DMAARB[31, 29:16], Reserved [30] */
+ { 0x1E,0x0000 }, /* LSW of Mode/DMA Arbitration MARBR[15:0] or DMAARB[15:0] */
+ { 0x20,0x0030 }, /* Local Miscellaneous Control 2 / Serial EEPROM WP Addr Boundary LMISC2[5:0], Res[7:6] / PROT_AREA[6:0], Res[7] */
+ { 0x22,0x0510 }, /* Local Miscellaneous Control 1 / Local Bus Big/Little Endian Descriptor LMISC1[7:0] / BIGEND[7:0] */
+ { 0x24,0x0000 }, /* MSW of Direct Slave Expansion ROM Range EROMRR[31:16] */
+ { 0x26,0x0000 }, /* LSW of Direct Slave Expansion ROM Range EROMRR[15:11, 0], Reserved [10:1] */
+ { 0x28,0x0000 }, /* MSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[31:16] */
+ { 0x2A,0x0000 }, /* LSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[15:11, 5:0], Reserved [10:6] */
+ { 0x2C,(0x4243 | HIGH_WORD((PATI_LOC_CFG_SPACE0_ATTR))) }, /* MSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[31:16] */
+ { 0x2E,LOW_WORD(PATI_LOC_CFG_SPACE0_ATTR) }, /* LSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[15:0] */
+ { 0x30,HIGH_WORD(PATI_DMASTER_MASK) }, /* MSW of Local Range for Direct Master-to-PCI DMRR[31:16] */
+ { 0x32,LOW_WORD(PATI_DMASTER_MASK) }, /* LSW of Local Range for Direct Master-to-PCI (Reserved) DMRR[15:0] */
+ { 0x34,HIGH_WORD(PATI_DMASTER_ADDR) }, /* MSW of Local Base Address for Direct Master-to-PCI Memory DMLBAM[31:16] */
+ { 0x36,LOW_WORD(PATI_DMASTER_ADDR) }, /* LSW of Local Base Address for Direct Master-to-PCI Memory (Reserved) DMLBAM[15:0] */
+ { 0x38,0x0000 }, /* MSW of Local Bus Address for Direct Master-to-PCI I/O Configuration DMLBAI[31:16] */
+ { 0x3A,0x0000 }, /* LSW of Local Bus Address for Direct Master-to-PCI I/O Configuration (Reserved) DMLBAI[15:0] */
+ { 0x3C,0x0000 }, /* MSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[31:16] */
+ { 0x3E,0x0000 }, /* LSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[15:0] */
+ { 0x40,0x0000 }, /* MSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[31, 23:16] Reserved [30:24]*/
+ { 0x42,0x0000 }, /* LSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[15:0] */
+ { 0x44,0x0000 }, /* PCI Subsystem ID PCISID[15:0] */
+ { 0x46,0x0000 }, /* PCI Subsystem Vendor ID PCISVID[15:0] */
+ { 0x48,HIGH_WORD(PATI_LOC_SDRAM_MASK) }, /* MSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[31:16] */
+ { 0x4A,LOW_WORD(PATI_LOC_SDRAM_MASK) }, /* LSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[15:0] */
+ { 0x4C,HIGH_WORD(PATI_LOC_SDRAM_ADDR) }, /* MSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[31:16] (SDRAM) */
+ { 0x4E,LOW_WORD(PATI_LOC_SDRAM_ADDR) | 0x1 }, /* LSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[15:2, 0], Reserved [1] */
+ { 0x50,HIGH_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) }, /* MSW of Local Address Space 1 Bus Region Descriptor LBRD1[31:16] */
+ { 0x52,LOW_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) }, /* LSW of Local Address Space 1 Bus Region Descriptor (Reserved) LBRD1[15:0] */
+ { 0x54,0x0000 }, /* Hot Swap Control/Status (Reserved) Reserved */
+ { 0x56,0x0000 }, /* Hot Swap Next Capability Pointer / Hot Swap Control HS_NEXT[7:0] / HS_CNTL[7:0] */
+ { 0x58,0x0000 }, /* Reserved Reserved */
+ { 0x5A,0x0000 }, /* PCI Arbiter Control PCIARB[3:0], Reserved [15:4] */
+ { 0x5C,0x0000 }, /* Power Management Capabilities PMC[15:9, 2:0] */
+ { 0x5E,0x0000 }, /* Power Management Next Capability Pointer (Reserved) / Power Management Capability ID (Reserved) Reserved*/
+ { 0x60,0x0000 }, /* Power Management Data / PMCSR Bridge Support Extension (Reserved) PMDATA[7:0] / Reserved */
+ { 0x62,0x0000 }, /* Power Management Control/Status PMCSR[14:8] */
+ { 0xFFFF,0xFFFF} /* terminaror */
+};
+#define PATI_EEPROM_LAST_OFFSET 0x64
+#endif /* #ifndef __PCI_EEPROM_H_ */
diff --git a/board/mpl/pati/plx9056.h b/board/mpl/pati/plx9056.h
new file mode 100644
index 0000000..763a793
--- /dev/null
+++ b/board/mpl/pati/plx9056.h
@@ -0,0 +1,114 @@
+/*
+ * (C) Copyright 2003
+ * Denis Peter, d.peter@mpl.ch
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* PLX9096 register definitions
+*/
+#ifndef __PLX9056_H_
+#define __PLX9056_H_ 1
+
+#include <pci.h>
+
+#ifdef PLX9056_LOC
+#define LOCAL_OFFSET 0x080
+/* PCI Config regs */
+#else
+#define LOCAL_OFFSET 0x000
+#endif
+
+#define PCI9056_VENDOR_ID PCI_VENDOR_ID
+//#define PCI9656_DEVICE_ID PCI_DEVICE_ID
+#define PCI9056_COMMAND PCI_COMMAND
+//#define PCI9656_STATUS PCI_STATUS
+#define PCI9056_REVISION PCI_REVISION_ID
+
+#define PCI9056_CACHE_SIZE PCI_CACHE_LINE_SIZE
+#define PCI9056_RTR_BASE PCI_BASE_ADDRESS_0
+#define PCI9056_RTR_IO_BASE PCI_BASE_ADDRESS_1
+#define PCI9056_LOCAL_BASE0 PCI_BASE_ADDRESS_2
+#define PCI9056_LOCAL_BASE1 PCI_BASE_ADDRESS_3
+#define PCI9056_UNUSED_BASE1 PCI_BASE_ADDRESS_4
+#define PCI9056_UNUSED_BASE2 PCI_BASE_ADDRESS_5
+#define PCI9056_CIS_PTR PCI_CARDBUS_CIS
+#define PCI9056_SUB_ID PCI_SUBSYSTEM_VENDOR_ID
+#define PCI9056_EXP_ROM_BASE PCI_ROM_ADDRESS
+#define PCI9056_CAP_PTR PCI_CAPABILITY_LIST
+#define PCI9056_INT_LINE PCI_INTERRUPT_LINE
+
+#if defined(PLX9056_LOC)
+ #define PCI9056_PM_CAP_ID 0x180
+ #define PCI9056_PM_CSR 0x184
+ #define PCI9056_HS_CAP_ID 0x188
+ #define PCI9056_VPD_CAP_ID 0x18C
+ #define PCI9056_VPD_DATA 0x190
+#endif
+
+
+
+#define PCI_DEVICE_ID_PLX9056 0x9056
+
+/* Local Configuration Registers Accessible via the PCI Base address + Variable */
+#define PCI9056_SPACE0_RANGE (0x000 + LOCAL_OFFSET)
+#define PCI9056_SPACE0_REMAP (0x004 + LOCAL_OFFSET)
+#define PCI9056_LOCAL_DMA_ARBIT (0x008 + LOCAL_OFFSET)
+#define PCI9056_ENDIAN_DESC (0x00c + LOCAL_OFFSET)
+#define PCI9056_EXP_ROM_RANGE (0x010 + LOCAL_OFFSET)
+#define PCI9056_EXP_ROM_REMAP (0x014 + LOCAL_OFFSET)
+#define PCI9056_SPACE0_ROM_DESC (0x018 + LOCAL_OFFSET)
+#define PCI9056_DM_RANGE (0x01c + LOCAL_OFFSET)
+#define PCI9056_DM_MEM_BASE (0x020 + LOCAL_OFFSET)
+#define PCI9056_DM_IO_BASE (0x024 + LOCAL_OFFSET)
+#define PCI9056_DM_PCI_MEM_REMAP (0x028 + LOCAL_OFFSET)
+#define PCI9056_DM_PCI_IO_CONFIG (0x02c + LOCAL_OFFSET)
+#define PCI9056_SPACE1_RANGE (0x0f0 + LOCAL_OFFSET)
+#define PCI9056_SPACE1_REMAP (0x0f4 + LOCAL_OFFSET)
+#define PCI9056_SPACE1_DESC (0x0f8 + LOCAL_OFFSET)
+#define PCI9056_DM_DAC (0x0fc + LOCAL_OFFSET)
+
+#ifdef PLX9056_LOC
+#define PCI9056_ARBITER_CTRL 0x1A0
+#define PCI9056_ABORT_ADDRESS 0x1A4
+#endif
+
+/* Runtime registers PCI Address + LOCAL_OFFSET */
+#ifdef PLX9056_LOC
+#define PCI9056_MAILBOX0 0x0C0
+#define PCI9056_MAILBOX1 0x0C4
+#else
+#define PCI9056_MAILBOX0 0x078
+#define PCI9056_MAILBOX1 0x07c
+#endif
+
+#define PCI9056_MAILBOX2 (0x048 + LOCAL_OFFSET)
+#define PCI9056_MAILBOX3 (0x04c + LOCAL_OFFSET)
+#define PCI9056_MAILBOX4 (0x050 + LOCAL_OFFSET)
+#define PCI9056_MAILBOX5 (0x054 + LOCAL_OFFSET)
+#define PCI9056_MAILBOX6 (0x058 + LOCAL_OFFSET)
+#define PCI9056_MAILBOX7 (0x05c + LOCAL_OFFSET)
+#define PCI9056_PCI_TO_LOC_DBELL (0x060 + LOCAL_OFFSET)
+#define PCI9056_LOC_TO_PCI_DBELL (0x064 + LOCAL_OFFSET)
+#define PCI9056_INT_CTRL_STAT (0x068 + LOCAL_OFFSET)
+#define PCI9056_EEPROM_CTRL_STAT (0x06c + LOCAL_OFFSET)
+#define PCI9056_PERM_VENDOR_ID (0x070 + LOCAL_OFFSET)
+#define PCI9056_REVISION_ID (0x074 + LOCAL_OFFSET)
+
+
+#endif /* #ifndef __PLX9056_H_ */
+
diff --git a/board/mpl/pati/u-boot.lds b/board/mpl/pati/u-boot.lds
new file mode 100644
index 0000000..3188801
--- /dev/null
+++ b/board/mpl/pati/u-boot.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+ * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc5xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+/* . = env_start;
+ .ppcenv :
+ {
+ common/environment.o (.ppcenv)
+ }
+*/
+}
diff --git a/cpu/mpc5xx/Makefile b/cpu/mpc5xx/Makefile
index ee20dda..b787b61 100644
--- a/cpu/mpc5xx/Makefile
+++ b/cpu/mpc5xx/Makefile
@@ -35,7 +35,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(CPU).a
START = start.S
-OBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o
+OBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
all: .depend $(START) $(LIB)
diff --git a/cpu/mpc5xx/cpu.c b/cpu/mpc5xx/cpu.c
index cc69511..0c22a31 100644
--- a/cpu/mpc5xx/cpu.c
+++ b/cpu/mpc5xx/cpu.c
@@ -122,12 +122,30 @@ unsigned long get_tbclk (void)
return (oscclk / 16);
}
+void dcache_enable (void)
+{
+ return;
+}
+
+void dcache_disable (void)
+{
+ return;
+}
+
+int dcache_status (void)
+{
+ return 0; /* always off */
+}
/*
* Reset board
*/
int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
+#if defined(CONFIG_PATI)
+ volatile ulong *addr = (ulong *) CFG_RESET_ADDRESS;
+ *addr = 1;
+#else
ulong addr;
/* Interrupts off, enable reset */
@@ -150,5 +168,6 @@ int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
addr = CFG_MONITOR_BASE - sizeof (ulong);
#endif
((void (*) (void)) addr) ();
+#endif /* #if defined(CONFIG_PATI) */
return 1;
}
diff --git a/cpu/mpc5xx/cpu_init.c b/cpu/mpc5xx/cpu_init.c
index e19d0f4..f4cd24b 100644
--- a/cpu/mpc5xx/cpu_init.c
+++ b/cpu/mpc5xx/cpu_init.c
@@ -64,6 +64,8 @@ void cpu_init_f (volatile immap_t * immr)
immr->im_sitk.sitk_piscrk = KAPWR_KEY;
immr->im_sit.sit_piscr = CFG_PISCR;
+#if !defined(CONFIG_PATI)
+ /* PATI sest PLL in start.S */
/* PLL (CPU clock) settings */
immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
@@ -81,6 +83,8 @@ void cpu_init_f (volatile immap_t * immr)
#endif
immr->im_clkrst.car_plprcr = reg;
+#endif /* !defined(CONFIG_PATI) */
+
/* System integration timers. CFG_MASK has EBDF configuration */
immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
reg = immr->im_clkrst.car_sccr;
diff --git a/cpu/mpc5xx/interrupts.c b/cpu/mpc5xx/interrupts.c
index 3678b5b..7f6e136 100644
--- a/cpu/mpc5xx/interrupts.c
+++ b/cpu/mpc5xx/interrupts.c
@@ -28,12 +28,20 @@
*/
#include <common.h>
+#include <command.h>
#include <mpc5xx.h>
#include <asm/processor.h>
+#if defined(CONFIG_PATI)
+/* PATI uses IRQs for PCI doorbell */
+#undef NR_IRQS
+#define NR_IRQS 16
+#endif
+
struct interrupt_action {
interrupt_handler_t *handler;
void *arg;
+ int count;
};
static struct interrupt_action irq_vecs[NR_IRQS];
@@ -45,12 +53,18 @@ static struct interrupt_action irq_vecs[NR_IRQS];
int interrupt_init_cpu (ulong *decrementer_count)
{
volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ int vec;
/* Decrementer used here for status led */
*decrementer_count = get_tbclk () / CFG_HZ;
/* Disable all interrupts */
immr->im_siu_conf.sc_simask = 0;
+ for (vec=0; vec<NR_IRQS; vec++) {
+ irq_vecs[vec].handler = NULL;
+ irq_vecs[vec].arg = NULL;
+ irq_vecs[vec].count = 0;
+ }
return (0);
}
@@ -163,3 +177,31 @@ void timer_interrupt_cpu (struct pt_regs *regs)
return;
}
+
+#if (CONFIG_COMMANDS & CFG_CMD_IRQ)
+/*******************************************************************************
+ *
+ * irqinfo - print information about IRQs
+ *
+ */
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int vec;
+
+ printf ("\nInterrupt-Information:\n");
+ printf ("Nr Routine Arg Count\n");
+
+ for (vec=0; vec<NR_IRQS; vec++) {
+ if (irq_vecs[vec].handler != NULL) {
+ printf ("%02d %08lx %08lx %d\n",
+ vec,
+ (ulong)irq_vecs[vec].handler,
+ (ulong)irq_vecs[vec].arg,
+ irq_vecs[vec].count);
+ }
+ }
+ return 0;
+}
+
+
+#endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */
diff --git a/cpu/mpc5xx/spi.c b/cpu/mpc5xx/spi.c
new file mode 100644
index 0000000..797d0c9
--- /dev/null
+++ b/cpu/mpc5xx/spi.c
@@ -0,0 +1,416 @@
+/*
+ * Copyright (c) 2001 Navin Boppuri / Prashant Patel
+ * <nboppuri@trinetcommunication.com>,
+ * <pmpatel@trinetcommunication.com>
+ * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
+ * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC5xx CPM SPI interface.
+ *
+ * Parts of this code are probably not portable and/or specific to
+ * the board which I used for the tests. Please send fixes/complaints
+ * to wd@denx.de
+ *
+ * Ported to MPC5xx
+ * Copyright (c) 2003 Denis Peter, MPL AG Switzerland, d.petr@mpl.ch.
+ */
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <asm/5xx_immap.h>
+#include <linux/ctype.h>
+#include <malloc.h>
+#include <post.h>
+#include <net.h>
+
+#if defined(CONFIG_SPI)
+
+#undef DEBUG
+
+#define SPI_EEPROM_WREN 0x06
+#define SPI_EEPROM_RDSR 0x05
+#define SPI_EEPROM_READ 0x03
+#define SPI_EEPROM_WRITE 0x02
+
+
+#ifdef DEBUG
+
+#define DPRINT(a) printf a;
+/* -----------------------------------------------
+ * Helper functions to peek into tx and rx buffers
+ * ----------------------------------------------- */
+static const char * const hex_digit = "0123456789ABCDEF";
+
+static char quickhex (int i)
+{
+ return hex_digit[i];
+}
+
+static void memdump (void *pv, int num)
+{
+ int i;
+ unsigned char *pc = (unsigned char *) pv;
+
+ for (i = 0; i < num; i++)
+ printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
+ printf ("\t");
+ for (i = 0; i < num; i++)
+ printf ("%c", isprint (pc[i]) ? pc[i] : '.');
+ printf ("\n");
+}
+#else /* !DEBUG */
+
+#define DPRINT(a)
+
+#endif /* DEBUG */
+
+/* -------------------
+ * Function prototypes
+ * ------------------- */
+void spi_init (void);
+
+ssize_t spi_read (uchar *, int, uchar *, int);
+ssize_t spi_write (uchar *, int, uchar *, int);
+ssize_t spi_xfer (size_t);
+
+
+/* **************************************************************************
+ *
+ * Function: spi_init_f
+ *
+ * Description: Init SPI-Controller (ROM part)
+ *
+ * return: ---
+ *
+ * *********************************************************************** */
+
+void spi_init_f (void)
+{
+ int i;
+
+ volatile immap_t *immr;
+ volatile qsmcm5xx_t *qsmcm;
+
+ immr = (immap_t *) CFG_IMMR;
+ qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+
+ qsmcm->qsmcm_qsmcr = 0; /* all accesses enabled */
+ qsmcm->qsmcm_qspi_il = 0; /* lowest IRQ */
+
+ /* --------------------------------------------
+ * GPIO or per. Function
+ * PQSPAR[00] = 0 reserved
+ * PQSPAR[01] = 1 [0x4000] -> PERI: (SPICS3)
+ * PQSPAR[02] = 0 [0x0000] -> GPIO
+ * PQSPAR[03] = 0 [0x0000] -> GPIO
+ * PQSPAR[04] = 1 [0x0800] -> PERI: (SPICS0)
+ * PQSPAR[05] = 0 reseved
+ * PQSPAR[06] = 1 [0x0200] -> PERI: (SPIMOSI)
+ * PQSPAR[07] = 1 [0x0100] -> PERI: (SPIMISO)
+ * -------------------------------------------- */
+ qsmcm->qsmcm_pqspar = 0x3 | (CFG_SPI_CS_USED << 3);
+
+ /* --------------------------------------------
+ * DDRQS[00] = 0 reserved
+ * DDRQS[01] = 1 [0x0040] -> SPICS3 Output
+ * DDRQS[02] = 0 [0x0000] -> GPIO Output
+ * DDRQS[03] = 0 [0x0000] -> GPIO Output
+ * DDRQS[04] = 1 [0x0008] -> SPICS0 Output
+ * DDRQS[05] = 1 [0x0004] -> SPICLK Output
+ * DDRQS[06] = 1 [0x0002] -> SPIMOSI Output
+ * DDRQS[07] = 0 [0x0001] -> SPIMISO Input
+ * -------------------------------------------- */
+ qsmcm->qsmcm_ddrqs = 0x7E;
+ /* --------------------------------------------
+ * Base state for used SPI CS pins, if base = 0 active must be 1
+ * PORTQS[00] = 0 reserved
+ * PORTQS[01] = 0 reserved
+ * PORTQS[02] = 0 reserved
+ * PORTQS[03] = 0 reserved
+ * PORTQS[04] = 0 [0x0000] RxD2
+ * PORTQS[05] = 1 [0x0400] TxD2
+ * PORTQS[06] = 0 [0x0000] RxD1
+ * PORTQS[07] = 1 [0x0100] TxD1
+ * PORTQS[08] = 0 reserved
+ * PORTQS[09] = 0 [0x0000] -> SPICS3 Base Output
+ * PORTQS[10] = 0 [0x0000] -> SPICS2 Base Output
+ * PORTQS[11] = 0 [0x0000] -> SPICS1 Base Output
+ * PORTQS[12] = 0 [0x0000] -> SPICS0 Base Output
+ * PORTQS[13] = 0 [0x0004] -> SPICLK Output
+ * PORTQS[14] = 0 [0x0002] -> SPIMOSI Output
+ * PORTQS[15] = 0 [0x0001] -> SPIMISO Input
+ * -------------------------------------------- */
+ qsmcm->qsmcm_portqs |= (CFG_SPI_CS_BASE << 3);
+ /* --------------------------------------------
+ * Controll Register 0
+ * SPCR0[00] = 1 (0x8000) Master
+ * SPCR0[01] = 0 (0x0000) Wired-Or
+ * SPCR0[2..5] = (0x2000) Bits per transfer (default 8)
+ * SPCR0[06] = 0 (0x0000) Normal polarity
+ * SPCR0[07] = 0 (0x0000) Normal Clock Phase
+ * SPCR0[08..15] = 14 1.4MHz
+ */
+ qsmcm->qsmcm_spcr0=0xA00E;
+ /* --------------------------------------------
+ * Controll Register 1
+ * SPCR1[00] = 0 (0x0000) QSPI enabled
+ * SPCR1[1..7] = (0x7F00) Delay before Transfer
+ * SPCR1[8..15] = (0x0000) Delay After transfer (204.8usec@40MHz)
+ */
+ qsmcm->qsmcm_spcr1=0x7F00;
+ /* --------------------------------------------
+ * Controll Register 2
+ * SPCR2[00] = 0 (0x0000) SPI IRQs Disabeld
+ * SPCR2[01] = 0 (0x0000) No Wrap around
+ * SPCR2[02] = 0 (0x0000) Wrap to 0
+ * SPCR2[3..7] = (0x0000) End Queue pointer = 0
+ * SPCR2[8..10] = 0 (0x0000) reserved
+ * SPCR2[11..15] = 0 (0x0000) NewQueue Address = 0
+ */
+ qsmcm->qsmcm_spcr2=0x0000;
+ /* --------------------------------------------
+ * Controll Register 3
+ * SPCR3[00..04] = 0 (0x0000) reserved
+ * SPCR3[05] = 0 (0x0000) Feedback disabled
+ * SPCR3[06] = 0 (0x0000) IRQ on HALTA & MODF disabled
+ * SPCR3[07] = 0 (0x0000) Not halted
+ */
+ qsmcm->qsmcm_spcr3=0x00;
+ /* --------------------------------------------
+ * SPSR (Controll Register 3) Read only/ reset Flags 08,09,10
+ * SPCR3[08] = 1 (0x80) QSPI finished
+ * SPCR3[09] = 1 (0x40) Mode Fault Flag
+ * SPCR3[10] = 1 (0x20) HALTA
+ * SPCR3[11..15] = 0 (0x0000) Last executed command
+ */
+ qsmcm->qsmcm_spsr=0xE0;
+ /*-------------------------------------------
+ * Setup RAM
+ */
+ for(i=0;i<32;i++) {
+ qsmcm->qsmcm_recram[i]=0x0000;
+ qsmcm->qsmcm_tranram[i]=0x0000;
+ qsmcm->qsmcm_comdram[i]=0x00;
+ }
+ return;
+}
+
+/* **************************************************************************
+ *
+ * Function: spi_init_r
+ * Dummy, all initializations have been done in spi_init_r
+ * *********************************************************************** */
+void spi_init_r (void)
+{
+ return;
+
+}
+
+/****************************************************************************
+ * Function: spi_write
+ **************************************************************************** */
+ssize_t short_spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int i,dlen;
+ volatile immap_t *immr;
+ volatile qsmcm5xx_t *qsmcm;
+
+ immr = (immap_t *) CFG_IMMR;
+ qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+ for(i=0;i<32;i++) {
+ qsmcm->qsmcm_recram[i]=0x0000;
+ qsmcm->qsmcm_tranram[i]=0x0000;
+ qsmcm->qsmcm_comdram[i]=0x00;
+ }
+ qsmcm->qsmcm_tranram[0] = SPI_EEPROM_WREN; /* write enable */
+ spi_xfer(1);
+ i=0;
+ qsmcm->qsmcm_tranram[i++] = SPI_EEPROM_WRITE; /* WRITE memory array */
+ qsmcm->qsmcm_tranram[i++] = addr[0];
+ qsmcm->qsmcm_tranram[i++] = addr[1];
+
+ for(dlen=0;dlen<len;dlen++) {
+ qsmcm->qsmcm_tranram[i+dlen] = buffer[dlen]; /* WRITE memory array */
+ }
+ /* transmit it */
+ spi_xfer(i+dlen);
+ /* ignore received data */
+ for (i = 0; i < 1000; i++) {
+ qsmcm->qsmcm_tranram[0] = SPI_EEPROM_RDSR; /* read status */
+ qsmcm->qsmcm_tranram[1] = 0;
+ spi_xfer(2);
+ if (!(qsmcm->qsmcm_recram[1] & 1)) {
+ break;
+ }
+ udelay(1000);
+ }
+ if (i >= 1000) {
+ printf ("*** spi_write: Time out while writing!\n");
+ }
+ return len;
+}
+
+#define TRANSFER_LEN 16
+
+ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int index,i,newlen;
+ uchar newaddr[2];
+ int curraddr;
+
+ curraddr=(addr[alen-2]<<8)+addr[alen-1];
+ i=len;
+ index=0;
+ do {
+ newaddr[1]=(curraddr & 0xff);
+ newaddr[0]=((curraddr>>8) & 0xff);
+ if(i>TRANSFER_LEN) {
+ newlen=TRANSFER_LEN;
+ i-=TRANSFER_LEN;
+ }
+ else {
+ newlen=i;
+ i=0;
+ }
+ short_spi_write (newaddr, 2, &buffer[index], newlen);
+ index+=newlen;
+ curraddr+=newlen;
+ }while(i);
+ return (len);
+}
+
+/****************************************************************************
+ * Function: spi_read
+ **************************************************************************** */
+ssize_t short_spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int i;
+ volatile immap_t *immr;
+ volatile qsmcm5xx_t *qsmcm;
+
+ immr = (immap_t *) CFG_IMMR;
+ qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+
+ for(i=0;i<32;i++) {
+ qsmcm->qsmcm_recram[i]=0x0000;
+ qsmcm->qsmcm_tranram[i]=0x0000;
+ qsmcm->qsmcm_comdram[i]=0x00;
+ }
+ i=0;
+ qsmcm->qsmcm_tranram[i++] = (SPI_EEPROM_READ); /* READ memory array */
+ qsmcm->qsmcm_tranram[i++] = addr[0] & 0xff;
+ qsmcm->qsmcm_tranram[i++] = addr[1] & 0xff;
+ spi_xfer(3 + len);
+ for(i=0;i<len;i++) {
+ *buffer++=(char)qsmcm->qsmcm_recram[i+3];
+ }
+ return len;
+}
+
+ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+ int index,i,newlen;
+ uchar newaddr[2];
+ int curraddr;
+
+ curraddr=(addr[alen-2]<<8)+addr[alen-1];
+ i=len;
+ index=0;
+ do {
+ newaddr[1]=(curraddr & 0xff);
+ newaddr[0]=((curraddr>>8) & 0xff);
+ if(i>TRANSFER_LEN) {
+ newlen=TRANSFER_LEN;
+ i-=TRANSFER_LEN;
+ }
+ else {
+ newlen=i;
+ i=0;
+ }
+ short_spi_read (newaddr, 2, &buffer[index], newlen);
+ index+=newlen;
+ curraddr+=newlen;
+ }while(i);
+ return (len);
+}
+
+
+
+/****************************************************************************
+ * Function: spi_xfer
+ **************************************************************************** */
+ssize_t spi_xfer (size_t count)
+{
+ volatile immap_t *immr;
+ volatile qsmcm5xx_t *qsmcm;
+ int i;
+ int tm;
+ ushort status;
+ immr = (immap_t *) CFG_IMMR;
+ qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+ DPRINT (("*** spi_xfer entered count %d***\n",count));
+
+ /* Set CS for device */
+ for(i=0;i<(count-1);i++)
+ qsmcm->qsmcm_comdram[i] = 0x80 | CFG_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
+
+ qsmcm->qsmcm_comdram[i] = CFG_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
+ qsmcm->qsmcm_spcr2=((count-1)&0x1F)<<8;
+
+ DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", count));
+
+ qsmcm->qsmcm_spsr=0xE0; /* clear all flags */
+
+ /* start spi transfer */
+ DPRINT (("*** spi_xfer: Performing transfer ...\n"));
+ qsmcm->qsmcm_spcr1 |= 0x8000; /* Start transmit */
+
+ /* --------------------------------
+ * Wait for SPI transmit to get out
+ * or time out (1 second = 1000 ms)
+ * -------------------------------- */
+ for (tm=0; tm<1000; ++tm) {
+ status=qsmcm->qsmcm_spcr1;
+ if((status & 0x8000)==0)
+ break;
+ udelay (1000);
+ }
+ if (tm >= 1000) {
+ printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
+ }
+#ifdef DEBUG
+ printf ("\nspi_xfer: txbuf after xfer\n");
+ memdump ((void *) qsmcm->qsmcm_tranram, 32); /* dump of txbuf before transmit */
+ printf ("spi_xfer: rxbuf after xfer\n");
+ memdump ((void *) qsmcm->qsmcm_recram, 32); /* dump of rxbuf after transmit */
+ printf ("\nspi_xfer: commbuf after xfer\n");
+ memdump ((void *) qsmcm->qsmcm_comdram, 32); /* dump of txbuf before transmit */
+ printf ("\n");
+#endif
+
+ return count;
+}
+
+#endif /* CONFIG_SPI */
+
+
diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S
index 548ec99..b56be2f 100644
--- a/cpu/mpc5xx/start.S
+++ b/cpu/mpc5xx/start.S
@@ -117,6 +117,29 @@ boot_warm:
mtspr COUNTA, r0
mtspr COUNTB, r0
+#if defined(CONFIG_PATI)
+ /* the external flash access on PATI fails if programming the PLL to 40MHz.
+ * Copy the PLL programming code to the internal RAM and execute it
+ *----------------------------------------------------------------------*/
+ lis r3, CFG_MONITOR_BASE@h
+ ori r3, r3, CFG_MONITOR_BASE@l
+ addi r3, r3, pll_prog_code_start - _start + EXC_OFF_SYS_RESET
+
+ lis r4, CFG_INIT_RAM_ADDR@h
+ ori r4, r4, CFG_INIT_RAM_ADDR@l
+ mtlr r4
+ addis r5,0,0x0
+ ori r5,r5,((pll_prog_code_end - pll_prog_code_start) >>2)
+ mtctr r5
+ addi r3, r3, -4
+ addi r4, r4, -4
+0:
+ lwzu r0,4(r3)
+ stwu r0,4(r4)
+ bdnz 0b /* copy loop */
+ blrl
+#endif
+
/*
* Calculate absolute address in FLASH and jump there
*----------------------------------------------------------------------*/
@@ -553,3 +576,30 @@ trap_reloc:
isync
blr
+
+
+#if defined(CONFIG_PATI)
+/* Program the PLL */
+pll_prog_code_start:
+ lis r4, (CFG_IMMR + 0x002fc384)@h
+ ori r4, r4, (CFG_IMMR + 0x002fc384)@l
+ lis r3, (0x55ccaa33)@h
+ ori r3, r3, (0x55ccaa33)@l
+ stw r3, 0(r4)
+ lis r4, (CFG_IMMR + 0x002fc284)@h
+ ori r4, r4, (CFG_IMMR + 0x002fc284)@l
+ lis r3, CFG_PLPRCR@h
+ ori r3, r3, CFG_PLPRCR@l
+ stw r3, 0(r4)
+ addis r3,0,0x0
+ ori r3,r3,0xA000
+ mtctr r3
+..spinlp:
+ bdnz ..spinlp /* spin loop */
+ blr
+pll_prog_code_end:
+ nop
+ blr
+#endif
+
+
diff --git a/drivers/rtl8139.c b/drivers/rtl8139.c
index 5b14e71..b9e4a8d 100644
--- a/drivers/rtl8139.c
+++ b/drivers/rtl8139.c
@@ -44,7 +44,7 @@
which reserves the ranges 0x00000-0x10000 and 0x98000-0xA0000. My
interpretation of this "reserved" is that Etherboot may do whatever it
likes, as long as its environment is kept intact (like the BIOS
- variables). Hopefully fixed rtl_poll() once and for all. The symptoms
+ variables). Hopefully fixed rtl_poll() once and for all. The symptoms
were that if Etherboot was left at the boot menu for several minutes, the
first eth_poll failed. Seems like I am the only person who does this.
First of all I fixed the debugging code and then set out for a long bug
@@ -53,18 +53,18 @@
driver and even the FreeBSD driver (what a piece of crap!) - and
eventually spotted the nasty thing: the transmit routine was acknowledging
each and every interrupt pending, including the RxOverrun and RxFIFIOver
- interrupts. This confused the RTL8139 thoroughly. It destroyed the
+ interrupts. This confused the RTL8139 thoroughly. It destroyed the
Rx ring contents by dumping the 2K FIFO contents right where we wanted to
get the next packet. Oh well, what fun.
- 18 Jan 2000 mdc@thinguin.org (Marty Connor)
+ 18 Jan 2000 mdc@thinguin.org (Marty Connor)
Drastically simplified error handling. Basically, if any error
in transmission or reception occurs, the card is reset.
Also, pointed all transmit descriptors to the same buffer to
- save buffer space. This should decrease driver size and avoid
+ save buffer space. This should decrease driver size and avoid
corruption because of exceeding 32K during runtime.
- 28 Jul 1999 (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de)
+ 28 Jul 1999 (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de)
rtl_poll was quite broken: it used the RxOK interrupt flag instead
of the RxBufferEmpty flag which often resulted in very bad
transmission performace - below 1kBytes/s.
@@ -77,10 +77,6 @@
#include <asm/io.h>
#include <pci.h>
-#ifdef __MIPS__
-static unsigned long mips_io_port_base = 0;
-#endif
-
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
defined(CONFIG_RTL8139)
@@ -95,11 +91,11 @@ static unsigned long mips_io_port_base = 0;
/* PCI Tuning Parameters
Threshold is bytes transferred to chip before transmission starts. */
-#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
-#define RX_FIFO_THRESH 4 /* Rx buffer level before first PCI xfer. */
-#define RX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 bytes */
-#define TX_DMA_BURST 4 /* Calculate as 16<<val. */
-#define NUM_TX_DESC 4 /* Number of Tx descriptor registers. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+#define RX_FIFO_THRESH 4 /* Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 bytes */
+#define TX_DMA_BURST 4 /* Calculate as 16<<val. */
+#define NUM_TX_DESC 4 /* Number of Tx descriptor registers. */
#define TX_BUF_SIZE ETH_FRAME_LEN /* FCS is added by the chip */
#define RX_BUF_LEN_IDX 0 /* 0, 1, 2 is allowed - 8,16,32K rx buffer */
#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
@@ -108,8 +104,8 @@ static unsigned long mips_io_port_base = 0;
#undef DEBUG_RX
#define currticks() get_timer(0)
-#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
-#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
/* Symbolic offsets to registers. */
enum RTL8139_registers {
@@ -276,12 +272,12 @@ static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
/* Serial EEPROM section. */
/* EEPROM_Ctrl bits. */
-#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
-#define EE_CS 0x08 /* EEPROM chip select. */
-#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
-#define EE_WRITE_0 0x00
-#define EE_WRITE_1 0x02
-#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
+#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
#define EE_ENB (0x80 | EE_CS)
/*
@@ -289,12 +285,12 @@ static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
*/
-#define eeprom_delay() inl(ee_addr)
+#define eeprom_delay() inl(ee_addr)
/* The EEPROM commands include the alway-set leading bit. */
-#define EE_WRITE_CMD (5)
-#define EE_READ_CMD (6)
-#define EE_ERASE_CMD (7)
+#define EE_WRITE_CMD (5)
+#define EE_READ_CMD (6)
+#define EE_ERASE_CMD (7)
static int read_eeprom(int location, int addr_len)
{
@@ -390,7 +386,7 @@ static void rtl_reset(struct eth_device *dev)
/* If we add multicast support, the MAR0 register would have to be
* initialized to 0xffffffffffffffff (two 32 bit accesses). Etherboot
- * only needs broadcast (for ARP/RARP/BOOTP/DHCP) and unicast. */
+ * only needs broadcast (for ARP/RARP/BOOTP/DHCP) and unicast. */
outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
@@ -436,7 +432,7 @@ static int rtl_transmit(struct eth_device *dev, volatile void *packet, int lengt
status = inw(ioaddr + IntrStatus);
/* Only acknlowledge interrupt sources we can properly handle
* here - the RxOverflow/RxFIFOOver MUST be handled in the
- * rtl_poll() function. */
+ * rtl_poll() function. */
outw(status & (TxOK | TxErr | PCIErr), ioaddr + IntrStatus);
if ((status & (TxOK | TxErr | PCIErr)) != 0) break;
} while (currticks() < to);
@@ -490,7 +486,7 @@ static int rtl_poll(struct eth_device *dev)
if ((rx_status & (RxBadSymbol|RxRunt|RxTooLong|RxCRCErr|RxBadAlign)) ||
(rx_size < ETH_ZLEN) || (rx_size > ETH_FRAME_LEN + 4)) {
printf("rx error %hX\n", rx_status);
- rtl_reset(dev); /* this clears all interrupts still pending */
+ rtl_reset(dev); /* this clears all interrupts still pending */
return 0;
}
@@ -527,6 +523,8 @@ static void rtl_disable(struct eth_device *dev)
{
int i;
+ ioaddr = dev->iobase;
+
/* reset the chip */
outb(CmdReset, ioaddr + ChipCmd);
diff --git a/include/asm-arm/u-boot-arm.h b/include/asm-arm/u-boot-arm.h
index 4c92b1f..d5dbd6d 100644
--- a/include/asm-arm/u-boot-arm.h
+++ b/include/asm-arm/u-boot-arm.h
@@ -43,6 +43,8 @@ int cleanup_before_linux(void);
/* board/.../... */
int board_init(void);
int dram_init (void);
+void setup_serial_tag (struct tag **params);
+void setup_revision_tag (struct tag **params);
/* ------------------------------------------------------------ */
/* Here is a list of some prototypes which are incompatible to */
diff --git a/include/common.h b/include/common.h
index 73a5a2e..6b92548 100644
--- a/include/common.h
+++ b/include/common.h
@@ -185,6 +185,7 @@ void inline setenv (char *, char *);
void setenv (char *, char *);
#endif /* CONFIG_PPC */
#ifdef CONFIG_ARM
+# include <asm/setup.h>
# include <asm/u-boot-arm.h> /* ARM version to be fixed! */
#endif /* CONFIG_ARM */
#ifdef CONFIG_I386 /* x86 version to be fixed! */
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
new file mode 100644
index 0000000..42c78d4
--- /dev/null
+++ b/include/configs/PATI.h
@@ -0,0 +1,285 @@
+/*
+ * (C) Copyright 2003
+ * Denis Peter d.peter@mpl.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File: PATI.h
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+
+#define CONFIG_MPC555 1 /* This is an MPC555 CPU */
+#define CONFIG_PATI 1 /* ...On a PATI board */
+/* Serial Console Configuration */
+#define CONFIG_5xx_CONS_SCI1
+#undef CONFIG_5xx_CONS_SCI2
+
+#define CONFIG_BAUDRATE 9600
+
+#define CONFIG_COMMANDS (CFG_CMD_MEMORY | CFG_CMD_LOADB | CFG_CMD_REGINFO | \
+ CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_ENV | CFG_CMD_REGINFO | \
+ CFG_CMD_BDI | CFG_CMD_CONSOLE | CFG_CMD_RUN | CFG_CMD_BSP | \
+ CFG_CMD_IMI | CFG_CMD_EEPROM | CFG_CMD_IRQ | CFG_CMD_MISC \
+)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+#define CONFIG_BOOTCOMMAND "" /* autoboot command */
+
+#define CONFIG_BOOTARGS "" /* */
+
+#define CONFIG_WATCHDOG /* turn on platform specific watchdog */
+
+/*#define CONFIG_STATUS_LED 1 *//* Enable status led */
+
+#define CONFIG_LOADS_ECHO 1 /* Echo on for serial download */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */
+#define CONFIG_PREBOOT
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "pati=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00010000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00A00000 /* 10 MB in SRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }
+
+
+/***********************************************************************
+ * Last Stage Init
+ ***********************************************************************/
+#define CONFIG_LAST_STAGE_INIT
+
+/*
+ * Low Level Configuration Settings
+ */
+
+/*
+ * Internal Memory Mapped (This is not the IMMR content)
+ */
+#define CFG_IMMR 0x01C00000 /* Physical start adress of internal memory map */
+
+/*
+ * Definitions for initial stack pointer and data area
+ */
+#define CFG_INIT_RAM_ADDR (CFG_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */
+#define CFG_INIT_RAM_END (CFG_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */
+#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial global data */
+#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
+#define CFG_INIT_SP_ADDR (CFG_IMMR + 0x03fa000) /* Physical start adress of inital stack */
+/*
+ * Start addresses for the final memory configuration
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */
+#define CFG_FLASH_BASE 0xffC00000 /* External flash */
+#define PCI_BASE 0x03000000 /* PCI Base (CS2) */
+#define PCI_CONFIG_BASE 0x04000000 /* PCI & PLD (CS3) */
+#define PLD_CONFIG_BASE 0x04001000 /* PLD (CS3) */
+
+#define CFG_MONITOR_BASE 0xFFF00000
+/* CFG_FLASH_BASE */ /* TEXT_BASE is defined in the board config.mk file. */
+ /* This adress is given to the linker with -Ttext to */
+ /* locate the text section at this adress. */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 192 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+
+
+#define CFG_RESET_ADDRESS (PLD_CONFIG_BASE + 0x10) /* Adress which causes reset */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ *-----------------------------------------------------------------------
+ *
+ */
+
+#define CFG_MAX_FLASH_BANKS 1 /* Max number of memory banks */
+#define CFG_MAX_FLASH_SECT 128 /* Max number of sectors on one chip */
+#define CFG_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */
+
+
+#define CFG_ENV_IS_IN_EEPROM
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_OFFSET 0
+#define CFG_ENV_SIZE 2048
+#endif
+
+#undef CFG_ENV_IS_IN_FLASH
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SIZE 0x00002000 /* Set whole sector as env */
+#define CFG_ENV_OFFSET ((0 - CFG_FLASH_BASE) - CFG_ENV_SIZE) /* Environment starts at this adress */
+#endif
+
+
+#define CONFIG_SPI 1
+#define CFG_SPI_CS_USED 0x09 /* CS0 and CS3 are used */
+#define CFG_SPI_CS_BASE 0x08 /* CS3 is active low */
+#define CFG_SPI_CS_ACT 0x00 /* CS3 is active low */
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * SW Watchdog freeze
+ */
+#undef CONFIG_WATCHDOG
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWP)
+#endif /* CONFIG_WATCHDOG */
+
+
+
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK SCCR_EBDF00
+#define CFG_SCCR (SCCR_TBS | SCCR_RTDIV | SCCR_RTSEL | \
+ SCCR_COM01 | SCCR_DFNL000 | SCCR_DFNH000)
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration
+ *-----------------------------------------------------------------------
+ * Data show cycle
+ */
+#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_EARB | SIUMCR_GPC01 | SIUMCR_MLRC11) /* Disable data show cycle */
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register
+ *-----------------------------------------------------------------------
+ * Set all bits to 40 Mhz
+ *
+ */
+#define CFG_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */
+
+
+#define CFG_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0)
+
+/*-----------------------------------------------------------------------
+ * UMCR - UIMB Module Configuration Register
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */
+
+/*-----------------------------------------------------------------------
+ * ICTRL - I-Bus Support Control Register
+ */
+#define CFG_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */
+
+/*-----------------------------------------------------------------------
+ * USIU - Memory Controller Register
+ *-----------------------------------------------------------------------
+ */
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_V | BR_BI | BR_PS_16 | BR_SETA)
+#define CFG_OR0_PRELIM (0xffc00000) /* SCY is not used if external TA is set */
+/* SDRAM */
+#define CFG_BR1_PRELIM (CFG_SDRAM_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
+#define CFG_OR1_PRELIM (OR_ADDR_MK_FF) /* SCY is not used if external TA is set */
+/* PCI */
+#define CFG_BR2_PRELIM (PCI_BASE | BR_V | BR_PS_32 | BR_SETA)
+#define CFG_OR2_PRELIM (OR_ADDR_MK_FF)
+/* config registers: */
+#define CFG_BR3_PRELIM (PCI_CONFIG_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
+#define CFG_OR3_PRELIM (0xffff0000)
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* We don't realign the flash */
+
+/*-----------------------------------------------------------------------
+ * DER - Timer Decrementer
+ *-----------------------------------------------------------------------
+ * Initialise to zero
+ */
+#define CFG_DER 0x00000000
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+#define VERSION_TAG "released"
+#define CONFIG_ISO_STRING "MEV-10084-001"
+
+#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
+
+#endif /* __CONFIG_H */
diff --git a/include/mpc5xx.h b/include/mpc5xx.h
index 345fca8..7508f6d 100644
--- a/include/mpc5xx.h
+++ b/include/mpc5xx.h
@@ -75,6 +75,10 @@
#define SIUMCR_DBPC01 0x00080000 /* - " - */
#define SIUMCR_DBPC10 0x00100000 /* - " - */
#define SIUMCR_DBPC11 0x00180000 /* - " - */
+#define SIUMCR_GPC00 0x00000000 /* General Pins Config */
+#define SIUMCR_GPC01 0x00020000 /* General Pins Config */
+#define SIUMCR_GPC10 0x00040000 /* General Pins Config */
+#define SIUMCR_GPC11 0x00060000 /* General Pins Config */
#define SIUMCR_DLK 0x00010000 /* Debug Register Lock */
#define SIUMCR_SC00 0x00000000 /* Multi Chip 32 bit */
#define SIUMCR_SC01 0x00004000 /* Muilt Chip 16 bit */
@@ -98,6 +102,7 @@
* PISCR - Periodic Interrupt Status and Control Register
*/
#define PISCR_PITF ((ushort)0x0002) /* PIT stops when FREEZE */
+#define PISCR_PS 0x0080 /* Periodic Interrupt Status */
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register
@@ -106,11 +111,12 @@
#define PLPRCR_DIVF_MSK 0x0000001f /* DIVF mask */
#define PLPRCR_CSRC_MSK 0x00000400 /* CSRC mask */
#define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */
-#define PLPRCR_DIVF_0 0x00900000 /* Division factor 0 */
-#define PLPRCR_MF_9 0x00000000 /* Mulitipliaction factor 9 */
+#define PLPRCR_DIVF_0 0x00000000 /* Division factor 0 */
+#define PLPRCR_MF_9 0x00900000 /* Mulitipliaction factor 9 */
#define PLPRCR_TEXPS 0x00004000 /* TEXP Status */
#define PLPRCR_TMIST 0x00001000 /* Timers Interrupt Status */
#define PLPRCR_CSR 0x00000080 /* CheskStop Reset value */
+#define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register
@@ -124,6 +130,7 @@
#define SCCR_TBS 0x02000000 /* Time Base Source */
#define SCCR_RTDIV 0x01000000 /* RTC Clock Divide */
#define SCCR_COM00 0x00000000 /* full strength CLKOUT output buffer */
+#define SCCR_COM01 0x20000000 /* half strength CLKOUT output buffer */
#define SCCR_DFNL000 0x00000000 /* Division by 2 (default = minimum) */
#define SCCR_DFNH000 0x00000000 /* Division by 1 (default = minimum) */
@@ -136,6 +143,7 @@
#define BR_PS_16 0x00000800 /* 16 bit port size */
#define BR_PS_32 0x00000000 /* 32 bit port size */
#define BR_LBDIR 0x00000008 /* Late burst data in progess */
+#define BR_SETA 0x00000004 /* External Data Acknowledge */
#define OR_SCY_3 0x00000030 /* 3 clock cycles wait states */
#define OR_SCY_1 0x00000000 /* 1 clock cycle wait state */
#define OR_SCY_8 0x00000080 /* 8 clock cycles wait states */
@@ -143,7 +151,7 @@
#define OR_BSCY 0x00000060 /* Burst beats length in clocks */
#define OR_ACS_10 0x00000600 /* Adress to chip-select setup */
#define OR_CSNT 0x00000800 /* Chip-select negotation time */
-#define OR_ETHR 0x00000000 /* Extended hold time on read */
+#define OR_ETHR 0x00000100 /* Extended hold time on read */
#define OR_ADDR_MK_FF 0xFF000000
#define OR_ADDR_MK_FFFF 0xFFFF0000
diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c
index 19680b5..e96ea81 100644
--- a/lib_arm/armlinux.c
+++ b/lib_arm/armlinux.c
@@ -30,16 +30,14 @@
#include <dataflash.h>
#endif
-#include <asm/setup.h>
-#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
-#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size))
-
/*cmd_boot.c*/
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#if defined (CONFIG_SETUP_MEMORY_TAGS) || \
defined (CONFIG_CMDLINE_TAG) || \
defined (CONFIG_INITRD_TAG) || \
+ defined (CONFIG_SERIAL_TAG) || \
+ defined (CONFIG_REVISION_TAG) || \
defined (CONFIG_VFD)
static void setup_start_tag (bd_t *bd);
@@ -221,8 +219,16 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
#if defined (CONFIG_SETUP_MEMORY_TAGS) || \
defined (CONFIG_CMDLINE_TAG) || \
defined (CONFIG_INITRD_TAG) || \
+ defined (CONFIG_SERIAL_TAG) || \
+ defined (CONFIG_REVISION_TAG) || \
defined (CONFIG_VFD)
setup_start_tag (bd);
+#ifdef CONFIG_SERIAL_TAG
+ setup_serial_tag (&params);
+#endif
+#ifdef CONFIG_REVISION_TAG
+ setup_revision_tag (&params);
+#endif
#ifdef CONFIG_SETUP_MEMORY_TAGS
setup_memory_tags (bd);
#endif
@@ -251,6 +257,8 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
#if defined (CONFIG_SETUP_MEMORY_TAGS) || \
defined (CONFIG_CMDLINE_TAG) || \
defined (CONFIG_INITRD_TAG) || \
+ defined (CONFIG_SERIAL_TAG) || \
+ defined (CONFIG_REVISION_TAG) || \
defined (CONFIG_VFD)
static void setup_start_tag (bd_t *bd)
{
@@ -308,10 +316,6 @@ static void setup_commandline_tag (bd_t *bd, char *commandline)
}
-#ifndef ATAG_INITRD2
-#define ATAG_INITRD2 0x54420005
-#endif
-
#ifdef CONFIG_INITRD_TAG
static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end)
{