summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2014-02-04 10:22:23 -0500
committerTom Rini <trini@ti.com>2014-02-04 11:51:20 -0500
commitb66af14dc9d0bb3b962e09b2d000f228e2d5b039 (patch)
tree74cc58551075570603e2ad02ad7eb1cec63d7181
parentc61d94d86035ab2165aedf208b8f3c768b277a3d (diff)
parent1b4175d6fa12b8012c119889ad5cc1e65c3cf6ba (diff)
downloadu-boot-imx-b66af14dc9d0bb3b962e09b2d000f228e2d5b039.zip
u-boot-imx-b66af14dc9d0bb3b962e09b2d000f228e2d5b039.tar.gz
u-boot-imx-b66af14dc9d0bb3b962e09b2d000f228e2d5b039.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
-rw-r--r--README6
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c2
-rw-r--r--arch/powerpc/cpu/mpc85xx/t1040_ids.c36
-rw-r--r--arch/powerpc/cpu/mpc85xx/t1040_serdes.c63
-rw-r--r--arch/powerpc/include/asm/config_mpc85xx.h6
-rw-r--r--arch/powerpc/include/asm/fsl_serdes.h8
-rw-r--r--arch/powerpc/include/asm/immap_85xx.h11
-rw-r--r--board/freescale/t1040qds/Makefile1
-rw-r--r--board/freescale/t1040qds/README6
-rw-r--r--board/freescale/t1040qds/eth.c492
-rw-r--r--board/freescale/t1040qds/t1040qds.c1
-rw-r--r--board/freescale/t104xrdb/Makefile1
-rw-r--r--board/freescale/t104xrdb/README6
-rw-r--r--board/freescale/t104xrdb/eth.c72
-rw-r--r--board/keymile/kmp204x/Makefile2
-rw-r--r--board/keymile/kmp204x/kmp204x.c128
-rw-r--r--board/keymile/kmp204x/kmp204x.h10
-rw-r--r--board/keymile/kmp204x/pbi.cfg10
-rw-r--r--board/keymile/kmp204x/pci.c85
-rw-r--r--board/keymile/kmp204x/qrio.c146
-rw-r--r--board/keymile/kmp204x/rcw_kmp204x.cfg2
-rw-r--r--boards.cfg1
-rw-r--r--doc/README.b4860qds4
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c243
-rw-r--r--drivers/mtd/nand/fsl_ifc_spl.c60
-rw-r--r--drivers/net/fm/t1040.c56
-rw-r--r--drivers/pci/fsl_pci_init.c4
-rw-r--r--include/configs/T1040QDS.h5
-rw-r--r--include/configs/T1040RDB.h24
-rw-r--r--include/configs/T1042RDB_PI.h20
-rw-r--r--include/configs/km/keymile-common.h10
-rw-r--r--include/configs/km/kmp204x-common.h21
-rw-r--r--include/configs/kmp204x.h7
-rw-r--r--include/fsl_ifc.h42
34 files changed, 1230 insertions, 361 deletions
diff --git a/README b/README
index 176de61..6cdf355 100644
--- a/README
+++ b/README
@@ -472,6 +472,12 @@ The following options need to be configured:
Board config to use DDR3. It can be enabled for SoCs with
Freescale DDR3 controllers.
+ CONFIG_SYS_FSL_IFC_BE
+ Defines the IFC controller register space as Big Endian
+
+ CONFIG_SYS_FSL_IFC_LE
+ Defines the IFC controller register space as Little Endian
+
CONFIG_SYS_FSL_PBL_PBI
It enables addition of RCW (Power on reset configuration) in built image.
Please refer doc/README.pblimage for more details
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
index 25db899..70e09ea 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -75,6 +75,8 @@ static const char *serdes_prtcl_str[] = {
[XFI_FM2_MAC9] = "XFI_FM2_MAC9",
[XFI_FM2_MAC10] = "XFI_FM2_MAC10",
[INTERLAKEN] = "INTERLAKEN",
+ [QSGMII_SW1_A] = "QSGMII_SW1_A",
+ [QSGMII_SW1_B] = "QSGMII_SW1_B",
};
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
index 32075ce..68160a9 100644
--- a/arch/powerpc/cpu/mpc85xx/t1040_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
@@ -21,21 +21,6 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
SET_QP_INFO(8, 34, 1, 3),
SET_QP_INFO(9, 35, 1, 0),
SET_QP_INFO(10, 36, 1, 0),
- SET_QP_INFO(11, 37, 1, 1),
- SET_QP_INFO(12, 38, 1, 1),
- SET_QP_INFO(13, 39, 1, 2),
- SET_QP_INFO(14, 40, 1, 2),
- SET_QP_INFO(15, 41, 1, 3),
- SET_QP_INFO(16, 42, 1, 3),
- SET_QP_INFO(17, 43, 1, 0),
- SET_QP_INFO(18, 44, 1, 0),
- SET_QP_INFO(19, 45, 1, 1),
- SET_QP_INFO(20, 46, 1, 1),
- SET_QP_INFO(21, 47, 1, 2),
- SET_QP_INFO(22, 48, 1, 2),
- SET_QP_INFO(23, 49, 1, 3),
- SET_QP_INFO(24, 50, 1, 3),
- SET_QP_INFO(25, 51, 1, 0),
};
#endif
@@ -60,11 +45,6 @@ struct liodn_id_table liodn_tbl[] = {
SET_DMA_LIODN(1, 147),
SET_DMA_LIODN(2, 227),
- SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
- SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
- SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
- SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
-
/* SET_NEXUS_LIODN(557), -- not yet implemented */
};
int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
@@ -77,8 +57,6 @@ struct liodn_id_table fman1_liodn_tbl[] = {
SET_FMAN_RX_1G_LIODN(1, 3, 91),
SET_FMAN_RX_1G_LIODN(1, 4, 92),
SET_FMAN_RX_1G_LIODN(1, 5, 93),
- SET_FMAN_RX_10G_LIODN(1, 0, 94),
- SET_FMAN_RX_10G_LIODN(1, 1, 95),
};
int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
#endif
@@ -97,23 +75,9 @@ struct liodn_id_table sec_liodn_tbl[] = {
};
int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
-#ifdef CONFIG_SYS_DPAA_RMAN
-struct liodn_id_table rman_liodn_tbl[] = {
- /* Set RMan block 0-3 liodn offset */
- SET_RMAN_LIODN(0, 678),
- SET_RMAN_LIODN(1, 679),
- SET_RMAN_LIODN(2, 680),
- SET_RMAN_LIODN(3, 681),
-};
-int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
-#endif
-
struct liodn_id_table liodn_bases[] = {
[FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
#ifdef CONFIG_SYS_DPAA_FMAN
[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
#endif
-#ifdef CONFIG_SYS_DPAA_RMAN
- [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
-#endif
};
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
index 94814ac..d86bb27 100644
--- a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
@@ -8,68 +8,59 @@
#include <asm/fsl_serdes.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include "fsl_corenet2_serdes.h"
-static u8 serdes_cfg_tbl[MAX_SERDES][0xC4][SRDS_MAX_LANES] = {
- { /* SerDes 1 */
- [0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
- PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1},
+
+static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
+ [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1,
+ PCIE2, PCIE2, PCIE2, PCIE2},
+ [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1,
+ PCIE2, PCIE3, PCIE4, SATA1},
+ [0x08] = {PCIE1, PCIE1, PCIE1, PCIE1,
+ PCIE2, PCIE3, SATA2, SATA1},
+ [0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE2, PCIE2, PCIE2},
+ [0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+ PCIE2, PCIE2, PCIE2, PCIE2},
[0x66] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
PCIE2, PCIE3, PCIE4, SATA1},
[0x67] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
- [0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
- PCIE2, PCIE2, PCIE2, PCIE2},
- [0x8D] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2,
- PCIE2, SGMII_SW1_DTSEC6, SGMII_SW1_DTSEC4, SGMII_SW1_DTSEC5},
- [0x89] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2,
- PCIE2, PCIE3, SGMII_SW1_DTSEC4, SATA1},
+ [0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+ PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1},
[0x86] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
PCIE2, PCIE3, PCIE4, SATA1},
+ [0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
[0x87] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
- [0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
- PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
- [0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
- PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
- [0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
- PCIE2, PCIE2, PCIE2, PCIE2},
- [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1,
- PCIE2, PCIE3, PCIE4, SATA1},
- [0x08] = {PCIE1, PCIE1, PCIE1, PCIE1,
- PCIE2, PCIE3, SATA2, SATA1},
+ [0x89] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A,
+ PCIE2, PCIE3, QSGMII_SW1_B, SATA1},
+ [0x8D] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A,
+ PCIE2, QSGMII_SW1_B, QSGMII_SW1_B, QSGMII_SW1_B},
[0x8F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
AURORA, NONE, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
- [0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
- PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
[0xA5] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
- [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1,
- PCIE2, PCIE2, PCIE2, PCIE2},
- },
- {
- },
- {
- },
- {
- },
+ [0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
+ [0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
};
-
enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
{
- return serdes_cfg_tbl[serdes][cfg][lane];
+ return serdes_cfg_tbl[cfg][lane];
}
int is_serdes_prtcl_valid(int serdes, u32 prtcl)
{
int i;
- if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl[serdes]))
+ if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl))
return 0;
for (i = 0; i < SRDS_MAX_LANES; i++) {
- if (serdes_cfg_tbl[serdes][prtcl][i] != NONE)
+ if (serdes_cfg_tbl[prtcl][i] != NONE)
return 1;
}
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index be1d9d2..56587ae 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -22,6 +22,9 @@
#define FSL_DDR_VER_4_7 47
#define FSL_DDR_VER_5_0 50
+/* IP endianness */
+#define CONFIG_SYS_FSL_IFC_BE
+
/* Number of TLB CAM entries we have on FSL Book-E chips */
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
@@ -717,8 +720,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 404ded4..f60cb0a 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -69,13 +69,7 @@ enum srds_prtcl {
XFI_FM2_MAC9,
XFI_FM2_MAC10,
INTERLAKEN,
- SGMII_SW1_DTSEC1, /* SW indicates on L2 switch */
- SGMII_SW1_DTSEC2,
- SGMII_SW1_DTSEC3,
- SGMII_SW1_DTSEC4,
- SGMII_SW1_DTSEC5,
- SGMII_SW1_DTSEC6,
- QSGMII_SW1_A, /* SW indicates on L2 swtich */
+ QSGMII_SW1_A, /* Indicates ports on L2 Switch */
QSGMII_SW1_B,
};
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 68c3c82..9d08321 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1759,6 +1759,17 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17
+#define FSL_CORENET_RCWSR13_EC1 0x30000000 /* bits 418..419 */
+#define FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC1_FM1_GPIO 0x10000000
+#define FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII 0x20000000
+#define FSL_CORENET_RCWSR13_EC2 0x0c000000 /* bits 420..421 */
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII 0x20000000
+#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL 0x00000080
+#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL_L2_SWITCH 0x00000000
+#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT 0x80000000
#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24
diff --git a/board/freescale/t1040qds/Makefile b/board/freescale/t1040qds/Makefile
index 93af9eb..c7470d7 100644
--- a/board/freescale/t1040qds/Makefile
+++ b/board/freescale/t1040qds/Makefile
@@ -9,3 +9,4 @@ obj-y += ddr.o
obj-$(CONFIG_PCI) += pci.o
obj-y += law.o
obj-y += tlb.o
+obj-y += eth.o
diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README
index 6d380ae..8160ca0 100644
--- a/board/freescale/t1040qds/README
+++ b/board/freescale/t1040qds/README
@@ -121,14 +121,14 @@ NOR Flash memory Map on T1040QDS
0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
-0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB
-0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB
+0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
+0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
-0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB
+0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB
0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
0xE8000000 0xE801FFFF RCW (current bank) 128KB
diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c
new file mode 100644
index 0000000..3077b4a
--- /dev/null
+++ b/board/freescale/t1040qds/eth.c
@@ -0,0 +1,492 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * The RGMII PHYs are provided by the two on-board PHY connected to
+ * dTSEC instances 4 and 5. The SGMII PHYs are provided by one on-board
+ * PHY or by the standard four-port SGMII riser card (VSC).
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/fsl_serdes.h>
+#include <asm/immap_85xx.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <asm/fsl_dtsec.h>
+
+#include "../common/fman.h"
+#include "../common/qixis.h"
+
+#include "t1040qds_qixis.h"
+
+#ifdef CONFIG_FMAN_ENET
+ /* - In T1040 there are only 8 SERDES lanes, spread across 2 SERDES banks.
+ * Bank 1 -> Lanes A, B, C, D
+ * Bank 2 -> Lanes E, F, G, H
+ */
+
+ /* Mapping of 8 SERDES lanes to T1040 QDS board slots. A value of '0' here
+ * means that the mapping must be determined dynamically, or that the lane
+ * maps to something other than a board slot.
+ */
+static u8 lane_to_slot[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
+ * housed.
+ */
+static int riser_phy_addr[] = {
+ CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR,
+ CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR,
+ CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR,
+ CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR,
+};
+
+/* Slot2 does not have EMI connections */
+#define EMI_NONE 0xFFFFFFFF
+#define EMI1_RGMII0 0
+#define EMI1_RGMII1 1
+#define EMI1_SLOT1 2
+#define EMI1_SLOT3 3
+#define EMI1_SLOT4 4
+#define EMI1_SLOT5 5
+#define EMI1_SLOT6 6
+#define EMI1_SLOT7 7
+#define EMI2 8
+
+static int mdio_mux[NUM_FM_PORTS];
+
+static const char * const mdio_names[] = {
+ "T1040_QDS_MDIO0",
+ "T1040_QDS_MDIO1",
+ "T1040_QDS_MDIO2",
+ "T1040_QDS_MDIO3",
+ "T1040_QDS_MDIO4",
+ "T1040_QDS_MDIO5",
+ "T1040_QDS_MDIO6",
+ "T1040_QDS_MDIO7",
+};
+
+struct t1040_qds_mdio {
+ u8 muxval;
+ struct mii_dev *realbus;
+};
+
+static const char *t1040_qds_mdio_name_for_muxval(u8 muxval)
+{
+ return mdio_names[muxval];
+}
+
+struct mii_dev *mii_dev_for_muxval(u8 muxval)
+{
+ struct mii_dev *bus;
+ const char *name = t1040_qds_mdio_name_for_muxval(muxval);
+
+ if (!name) {
+ printf("No bus for muxval %x\n", muxval);
+ return NULL;
+ }
+
+ bus = miiphy_get_dev_by_name(name);
+
+ if (!bus) {
+ printf("No bus by name %s\n", name);
+ return NULL;
+ }
+
+ return bus;
+}
+
+static void t1040_qds_mux_mdio(u8 muxval)
+{
+ u8 brdcfg4;
+ if (muxval <= 7) {
+ brdcfg4 = QIXIS_READ(brdcfg[4]);
+ brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
+ brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
+ QIXIS_WRITE(brdcfg[4], brdcfg4);
+ }
+}
+
+static int t1040_qds_mdio_read(struct mii_dev *bus, int addr, int devad,
+ int regnum)
+{
+ struct t1040_qds_mdio *priv = bus->priv;
+
+ t1040_qds_mux_mdio(priv->muxval);
+
+ return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int t1040_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int regnum, u16 value)
+{
+ struct t1040_qds_mdio *priv = bus->priv;
+
+ t1040_qds_mux_mdio(priv->muxval);
+
+ return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int t1040_qds_mdio_reset(struct mii_dev *bus)
+{
+ struct t1040_qds_mdio *priv = bus->priv;
+
+ return priv->realbus->reset(priv->realbus);
+}
+
+static int t1040_qds_mdio_init(char *realbusname, u8 muxval)
+{
+ struct t1040_qds_mdio *pmdio;
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate t1040_qds MDIO bus\n");
+ return -1;
+ }
+
+ pmdio = malloc(sizeof(*pmdio));
+ if (!pmdio) {
+ printf("Failed to allocate t1040_qds private data\n");
+ free(bus);
+ return -1;
+ }
+
+ bus->read = t1040_qds_mdio_read;
+ bus->write = t1040_qds_mdio_write;
+ bus->reset = t1040_qds_mdio_reset;
+ sprintf(bus->name, t1040_qds_mdio_name_for_muxval(muxval));
+
+ pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+ if (!pmdio->realbus) {
+ printf("No bus with name %s\n", realbusname);
+ free(bus);
+ free(pmdio);
+ return -1;
+ }
+
+ pmdio->muxval = muxval;
+ bus->priv = pmdio;
+
+ return mdio_register(bus);
+}
+
+/*
+ * Initialize the lane_to_slot[] array.
+ *
+ * On the T1040QDS board the mapping is controlled by ?? register.
+ */
+static void initialize_lane_to_slot(void)
+{
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ int serdes1_prtcl = (in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL)
+ >> FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+ QIXIS_WRITE(cms[0], 0x07);
+
+ switch (serdes1_prtcl) {
+ case 0x60:
+ case 0x66:
+ case 0x67:
+ case 0x69:
+ lane_to_slot[1] = 7;
+ lane_to_slot[2] = 6;
+ lane_to_slot[3] = 5;
+ break;
+ case 0x86:
+ lane_to_slot[1] = 7;
+ lane_to_slot[2] = 7;
+ lane_to_slot[3] = 7;
+ break;
+ case 0x87:
+ lane_to_slot[1] = 7;
+ lane_to_slot[2] = 7;
+ lane_to_slot[3] = 7;
+ lane_to_slot[7] = 7;
+ break;
+ case 0x89:
+ lane_to_slot[1] = 7;
+ lane_to_slot[2] = 7;
+ lane_to_slot[3] = 7;
+ lane_to_slot[7] = 7;
+ break;
+ case 0x8d:
+ lane_to_slot[1] = 7;
+ lane_to_slot[2] = 7;
+ lane_to_slot[3] = 7;
+ lane_to_slot[5] = 3;
+ lane_to_slot[6] = 3;
+ lane_to_slot[7] = 3;
+ break;
+ case 0x8F:
+ case 0x85:
+ lane_to_slot[1] = 7;
+ lane_to_slot[2] = 6;
+ lane_to_slot[3] = 5;
+ lane_to_slot[6] = 3;
+ lane_to_slot[7] = 3;
+ break;
+ case 0xA5:
+ lane_to_slot[1] = 7;
+ lane_to_slot[6] = 3;
+ lane_to_slot[7] = 3;
+ break;
+ case 0xA7:
+ lane_to_slot[1] = 7;
+ lane_to_slot[7] = 7;
+ break;
+ case 0xAA:
+ lane_to_slot[1] = 7;
+ lane_to_slot[6] = 7;
+ lane_to_slot[7] = 7;
+ break;
+ case 0x40:
+ lane_to_slot[2] = 7;
+ lane_to_slot[3] = 7;
+ break;
+ default:
+ printf("qds: Fman: Unsupported SerDes Protocol 0x%02x\n",
+ serdes1_prtcl);
+ break;
+ }
+}
+
+/*
+ * Given the following ...
+ *
+ * 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
+ * compatible string and 'addr' physical address)
+ *
+ * 2) An Fman port
+ *
+ * ... update the phy-handle property of the Ethernet node to point to the
+ * right PHY. This assumes that we already know the PHY for each port.
+ *
+ * The offset of the Fman Ethernet node is also passed in for convenience, but
+ * it is not used, and we recalculate the offset anyway.
+ *
+ * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC.
+ * Inside the Fman, "ports" are things that connect to MACs. We only call them
+ * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs
+ * and ports are the same thing.
+ *
+ */
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+ enum fm_port port, int offset)
+{
+ phy_interface_t intf = fm_info_get_enet_if(port);
+ char phy[16];
+
+ /* The RGMII PHY is identified by the MAC connected to it */
+ if (intf == PHY_INTERFACE_MODE_RGMII) {
+ sprintf(phy, "rgmii_phy%u", port == FM1_DTSEC4 ? 1 : 2);
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ }
+
+ /* The SGMII PHY is identified by the MAC connected to it */
+ if (intf == PHY_INTERFACE_MODE_SGMII) {
+ int lane = serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1
+ + port);
+ u8 slot;
+ if (lane < 0)
+ return;
+ slot = lane_to_slot[lane];
+ if (slot) {
+ /* Slot housing a SGMII riser card */
+ sprintf(phy, "phy_s%x_%02x", slot,
+ (fm_info_get_phy_address(port - FM1_DTSEC1)-
+ CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + 1));
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ }
+ }
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+ int i, lane, idx;
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ idx = i - FM1_DTSEC1;
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ SGMII_FM1_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+
+ switch (mdio_mux[i]) {
+ case EMI1_SLOT3:
+ fdt_status_okay_by_alias(fdt, "emi1_slot3");
+ break;
+ case EMI1_SLOT5:
+ fdt_status_okay_by_alias(fdt, "emi1_slot5");
+ break;
+ case EMI1_SLOT6:
+ fdt_status_okay_by_alias(fdt, "emi1_slot6");
+ break;
+ case EMI1_SLOT7:
+ fdt_status_okay_by_alias(fdt, "emi1_slot7");
+ break;
+ }
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ if (i == FM1_DTSEC4)
+ fdt_status_okay_by_alias(fdt, "emi1_rgmii0");
+
+ if (i == FM1_DTSEC5)
+ fdt_status_okay_by_alias(fdt, "emi1_rgmii1");
+ break;
+ default:
+ break;
+ }
+ }
+}
+#endif /* #ifdef CONFIG_FMAN_ENET */
+
+static void set_brdcfg9_for_gtx_clk(void)
+{
+ u8 brdcfg9;
+ brdcfg9 = QIXIS_READ(brdcfg[9]);
+ brdcfg9 |= (1 << 5);
+ QIXIS_WRITE(brdcfg[9], brdcfg9);
+}
+
+void t1040_handle_phy_interface_sgmii(int i)
+{
+ int lane, idx, slot;
+ idx = i - FM1_DTSEC1;
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ SGMII_FM1_DTSEC1 + idx);
+
+ if (lane < 0)
+ return;
+ slot = lane_to_slot[lane];
+
+ switch (slot) {
+ case 1:
+ mdio_mux[i] = EMI1_SLOT1;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case 3:
+ if (FM1_DTSEC4 == i)
+ fm_info_set_phy_address(i, riser_phy_addr[0]);
+ if (FM1_DTSEC5 == i)
+ fm_info_set_phy_address(i, riser_phy_addr[1]);
+
+ mdio_mux[i] = EMI1_SLOT3;
+
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case 4:
+ mdio_mux[i] = EMI1_SLOT4;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case 5:
+ /* Slot housing a SGMII riser card? */
+ fm_info_set_phy_address(i, riser_phy_addr[0]);
+ mdio_mux[i] = EMI1_SLOT5;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case 6:
+ /* Slot housing a SGMII riser card? */
+ fm_info_set_phy_address(i, riser_phy_addr[0]);
+ mdio_mux[i] = EMI1_SLOT6;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case 7:
+ if (FM1_DTSEC1 == i)
+ fm_info_set_phy_address(i, riser_phy_addr[0]);
+ if (FM1_DTSEC2 == i)
+ fm_info_set_phy_address(i, riser_phy_addr[1]);
+ if (FM1_DTSEC3 == i)
+ fm_info_set_phy_address(i, riser_phy_addr[2]);
+
+ mdio_mux[i] = EMI1_SLOT7;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+}
+void t1040_handle_phy_interface_rgmii(int i)
+{
+ fm_info_set_phy_address(i, i == FM1_DTSEC5 ?
+ CONFIG_SYS_FM1_DTSEC5_PHY_ADDR :
+ CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
+ mdio_mux[i] = (i == FM1_DTSEC5) ? EMI1_RGMII1 :
+ EMI1_RGMII0;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+ struct memac_mdio_info memac_mdio_info;
+ unsigned int i;
+
+ printf("Initializing Fman\n");
+ set_brdcfg9_for_gtx_clk();
+
+ initialize_lane_to_slot();
+
+ /* Initialize the mdio_mux array so we can recognize empty elements */
+ for (i = 0; i < NUM_FM_PORTS; i++)
+ mdio_mux[i] = EMI_NONE;
+
+ memac_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+ memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the real 1G MDIO bus */
+ fm_memac_mdio_init(bis, &memac_mdio_info);
+
+ /* Register the muxing front-ends to the MDIO buses */
+ t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII0);
+ t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
+ t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
+ t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
+ t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
+ t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
+ t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6);
+ t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
+
+ /*
+ * Program on board RGMII PHY addresses. If the SGMII Riser
+ * card used, we'll override the PHY address later. For any DTSEC that
+ * is RGMII, we'll also override its PHY address later. We assume that
+ * DTSEC4 and DTSEC5 are used for RGMII.
+ */
+ fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_QSGMII:
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ t1040_handle_phy_interface_sgmii(i);
+ break;
+
+ case PHY_INTERFACE_MODE_RGMII:
+ /* Only DTSEC4 and DTSEC5 can be routed to RGMII */
+ t1040_handle_phy_interface_rgmii(i);
+ break;
+ default:
+ break;
+ }
+ }
+
+ cpu_eth_init(bis);
+#endif
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c
index de3ea5c..3dec447 100644
--- a/board/freescale/t1040qds/t1040qds.c
+++ b/board/freescale/t1040qds/t1040qds.c
@@ -223,6 +223,7 @@ void ft_board_setup(void *blob, bd_t *bd)
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_ethernet(blob);
+ fdt_fixup_board_enet(blob);
#endif
}
diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile
index 76c0c94..e51fb7a 100644
--- a/board/freescale/t104xrdb/Makefile
+++ b/board/freescale/t104xrdb/Makefile
@@ -7,6 +7,7 @@
obj-y += t104xrdb.o
obj-y += ddr.o
+obj-y += eth.o
obj-$(CONFIG_PCI) += pci.o
obj-y += law.o
obj-y += tlb.o
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index 11e03bd..1da52bb 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -164,14 +164,14 @@ NOR Flash memory Map
0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
-0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB
-0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB
+0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
+0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
-0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB
+0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB
0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
0xE8000000 0xE801FFFF RCW (current bank) 128KB
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
new file mode 100644
index 0000000..0188fd4
--- /dev/null
+++ b/board/freescale/t104xrdb/eth.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/immap_85xx.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <asm/fsl_dtsec.h>
+
+#include "../common/fman.h"
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+ struct memac_mdio_info memac_mdio_info;
+ unsigned int i;
+ int phy_addr = 0;
+ printf("Initializing Fman\n");
+
+ memac_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+ memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the real 1G MDIO bus */
+ fm_memac_mdio_init(bis, &memac_mdio_info);
+
+ /*
+ * Program on board RGMII, SGMII PHY addresses.
+ */
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ int idx = i - FM1_DTSEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+#ifdef CONFIG_T1040RDB
+ case PHY_INTERFACE_MODE_SGMII:
+ /* T1040RDB only supports SGMII on DTSEC3 */
+ fm_info_set_phy_address(FM1_DTSEC3,
+ CONFIG_SYS_SGMII1_PHY_ADDR);
+#endif
+ case PHY_INTERFACE_MODE_RGMII:
+ if (FM1_DTSEC4 == i)
+ phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR;
+ if (FM1_DTSEC5 == i)
+ phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR;
+ fm_info_set_phy_address(i, phy_addr);
+ break;
+ case PHY_INTERFACE_MODE_QSGMII:
+ fm_info_set_phy_address(i, 0);
+ break;
+ case PHY_INTERFACE_MODE_NONE:
+ fm_info_set_phy_address(i, 0);
+ break;
+ default:
+ printf("Fman1: DTSEC%u set to unknown interface %i\n",
+ idx + 1, fm_info_get_enet_if(i));
+ fm_info_set_phy_address(i, 0);
+ break;
+ }
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+ }
+
+ cpu_eth_init(bis);
+#endif
+
+ return pci_eth_init(bis);
+}
diff --git a/board/keymile/kmp204x/Makefile b/board/keymile/kmp204x/Makefile
index 3e69ee2..c57ca08 100644
--- a/board/keymile/kmp204x/Makefile
+++ b/board/keymile/kmp204x/Makefile
@@ -8,5 +8,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := kmp204x.o ddr.o eth.o tlb.o pci.o law.o \
+obj-y := kmp204x.o ddr.o eth.o tlb.o pci.o law.o qrio.o \
../common/common.o ../common/ivm.o
diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
index f02642a..95a19cd 100644
--- a/board/keymile/kmp204x/kmp204x.c
+++ b/board/keymile/kmp204x/kmp204x.c
@@ -33,12 +33,51 @@ int checkboard(void)
return 0;
}
-/* TODO: implement the I2C deblocking function */
-int i2c_make_abort(void)
+/* I2C deblocking uses the algorithm defined in board/keymile/common/common.c
+ * 2 dedicated QRIO GPIOs externally pull the SCL and SDA lines
+ * For I2C only the low state is activly driven and high state is pulled-up
+ * by a resistor. Therefore the deblock GPIOs are used
+ * -> as an active output to drive a low state
+ * -> as an open-drain input to have a pulled-up high state
+ */
+
+/* QRIO GPIOs used for deblocking */
+#define DEBLOCK_PORT1 GPIO_A
+#define DEBLOCK_SCL1 20
+#define DEBLOCK_SDA1 21
+
+/* By default deblock GPIOs are floating */
+static void i2c_deblock_gpio_cfg(void)
+{
+ /* set I2C bus 1 deblocking GPIOs input, but 0 value for open drain */
+ qrio_gpio_direction_input(DEBLOCK_PORT1, DEBLOCK_SCL1);
+ qrio_gpio_direction_input(DEBLOCK_PORT1, DEBLOCK_SDA1);
+
+ qrio_set_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1, 0);
+ qrio_set_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1, 0);
+}
+
+void set_sda(int state)
+{
+ qrio_set_opendrain_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1, state);
+}
+
+void set_scl(int state)
+{
+ qrio_set_opendrain_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1, state);
+}
+
+int get_sda(void)
+{
+ return qrio_get_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1);
+}
+
+int get_scl(void)
{
- return 1;
+ return qrio_get_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1);
}
+
#define ZL30158_RST 8
#define ZL30343_RST 9
@@ -62,6 +101,7 @@ int board_early_init_f(void)
int board_early_init_r(void)
{
+ int ret = 0;
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
@@ -69,7 +109,11 @@ int board_early_init_r(void)
set_liodns();
setup_portals();
- return 0;
+ ret = trigger_fpga_config();
+ if (ret)
+ printf("error triggering PCIe FPGA config\n");
+
+ return ret;
}
unsigned long get_board_sys_clk(unsigned long dummy)
@@ -77,80 +121,12 @@ unsigned long get_board_sys_clk(unsigned long dummy)
return 66666666;
}
-#define WDMASK_OFF 0x16
-
-static void qrio_wdmask(u8 bit, bool wden)
-{
- u16 wdmask;
- void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
-
- wdmask = in_be16(qrio_base + WDMASK_OFF);
-
- if (wden)
- wdmask |= (1 << bit);
- else
- wdmask &= ~(1 << bit);
-
- out_be16(qrio_base + WDMASK_OFF, wdmask);
-}
-
-#define PRST_OFF 0x1a
-
-void qrio_prst(u8 bit, bool en, bool wden)
-{
- u16 prst;
- void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
-
- qrio_wdmask(bit, wden);
-
- prst = in_be16(qrio_base + PRST_OFF);
-
- if (en)
- prst &= ~(1 << bit);
- else
- prst |= (1 << bit);
-
- out_be16(qrio_base + PRST_OFF, prst);
-}
-
-#define PRSTCFG_OFF 0x1c
-
-void qrio_prstcfg(u8 bit, u8 mode)
-{
- u32 prstcfg;
- u8 i;
- void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
-
- prstcfg = in_be32(qrio_base + PRSTCFG_OFF);
-
- for (i = 0; i < 2; i++) {
- if (mode & (1<<i))
- set_bit(2*bit+i, &prstcfg);
- else
- clear_bit(2*bit+i, &prstcfg);
- }
-
- out_be32(qrio_base + PRSTCFG_OFF, prstcfg);
-}
-
-
-#define BOOTCOUNT_OFF 0x12
-
-void bootcount_store(ulong counter)
+int misc_init_f(void)
{
- u8 val;
- void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
-
- val = (counter <= 255) ? (u8)counter : 255;
- out_8(qrio_base + BOOTCOUNT_OFF, val);
-}
+ /* configure QRIO pis for i2c deblocking */
+ i2c_deblock_gpio_cfg();
-ulong bootcount_load(void)
-{
- u8 val;
- void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
- val = in_8(qrio_base + BOOTCOUNT_OFF);
- return val;
+ return 0;
}
#define NUM_SRDS_BANKS 2
diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h
index b6ba672..0267596 100644
--- a/board/keymile/kmp204x/kmp204x.h
+++ b/board/keymile/kmp204x/kmp204x.h
@@ -5,6 +5,16 @@
* SPDX-License-Identifier: GPL-2.0+
*/
+/* QRIO GPIO ports */
+#define GPIO_A 0x40
+#define GPIO_B 0x60
+
+int qrio_get_gpio(u8 port_off, u8 gpio_nr);
+void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val);
+void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value);
+void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value);
+void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr);
+
#define PRSTCFG_POWUP_UNIT_CORE_RST 0x0
#define PRSTCFG_POWUP_UNIT_RST 0x1
#define PRSTCFG_POWUP_RST 0x3
diff --git a/board/keymile/kmp204x/pbi.cfg b/board/keymile/kmp204x/pbi.cfg
index f38dcf9..9af8bd5 100644
--- a/board/keymile/kmp204x/pbi.cfg
+++ b/board/keymile/kmp204x/pbi.cfg
@@ -8,6 +8,16 @@
#
#PBI commands
+#Workaround for A-006559 needed for rev 2.0 of P2041 silicon
+#Freescale's errarta sheet suggests it may be done with PBI
+09000010 00000000
+09000014 00000000
+09000018 81d00000
+09021008 0000f000
+09021028 0000f000
+09021048 0000f000
+09021068 0000f000
+09000018 00000000
#Initialize CPC1 as 1MB SRAM
09010000 00200400
09138000 00000000
diff --git a/board/keymile/kmp204x/pci.c b/board/keymile/kmp204x/pci.c
index ec20c8a..a484eb5 100644
--- a/board/keymile/kmp204x/pci.c
+++ b/board/keymile/kmp204x/pci.c
@@ -14,18 +14,103 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/fsl_serdes.h>
+#include <asm/errno.h>
#include "kmp204x.h"
+#define PROM_SEL_L 11
+/* control the PROM_SEL_L signal*/
+static void toggle_fpga_eeprom_bus(bool cpu_own)
+{
+ qrio_gpio_direction_output(GPIO_A, PROM_SEL_L, !cpu_own);
+}
+
+#define CONF_SEL_L 10
+#define FPGA_PROG_L 19
+#define FPGA_DONE 18
+#define FPGA_INIT_L 17
+
+int trigger_fpga_config(void)
+{
+ int ret = 0, init_l;
+ /* approx 10ms */
+ u32 timeout = 10000;
+
+ /* make sure the FPGA_can access the EEPROM */
+ toggle_fpga_eeprom_bus(false);
+
+ /* assert CONF_SEL_L to be able to drive FPGA_PROG_L */
+ qrio_gpio_direction_output(GPIO_A, CONF_SEL_L, 0);
+
+ /* trigger the config start */
+ qrio_gpio_direction_output(GPIO_A, FPGA_PROG_L, 0);
+
+ /* small delay for INIT_L line */
+ udelay(10);
+
+ /* wait for FPGA_INIT to be asserted */
+ do {
+ init_l = qrio_get_gpio(GPIO_A, FPGA_INIT_L);
+ if (timeout-- == 0) {
+ printf("FPGA_INIT timeout\n");
+ ret = -EFAULT;
+ break;
+ }
+ udelay(10);
+ } while (init_l);
+
+ /* deassert FPGA_PROG, config should start */
+ qrio_set_gpio(GPIO_A, FPGA_PROG_L, 1);
+
+ return ret;
+}
+
+/* poll the FPGA_DONE signal and give the EEPROM back to the QorIQ */
+static int wait_for_fpga_config(void)
+{
+ int ret = 0, done;
+ /* approx 5 s */
+ u32 timeout = 500000;
+
+ printf("PCIe FPGA config:");
+ do {
+ done = qrio_get_gpio(GPIO_A, FPGA_DONE);
+ if (timeout-- == 0) {
+ printf(" FPGA_DONE timeout\n");
+ ret = -EFAULT;
+ goto err_out;
+ }
+ udelay(10);
+ } while (!done);
+
+ printf(" done\n");
+
+err_out:
+ /* deactive CONF_SEL and give the CPU conf EEPROM access */
+ qrio_set_gpio(GPIO_A, CONF_SEL_L, 1);
+ toggle_fpga_eeprom_bus(true);
+
+ return ret;
+}
+
#define PCIE_SW_RST 14
+#define PEXHC_SW_RST 13
#define HOOPER_SW_RST 12
void pci_init_board(void)
{
+ /* first wait for the PCIe FPGA to be configured
+ * it has been triggered earlier in board_early_init_r */
+ int ret = wait_for_fpga_config();
+ if (ret)
+ printf("error finishing PCIe FPGA config\n");
+
qrio_prst(PCIE_SW_RST, false, false);
+ qrio_prst(PEXHC_SW_RST, false, false);
qrio_prst(HOOPER_SW_RST, false, false);
/* Hooper is not direcly PCIe capable */
mdelay(50);
+
fsl_pcie_init_board(0);
}
diff --git a/board/keymile/kmp204x/qrio.c b/board/keymile/kmp204x/qrio.c
new file mode 100644
index 0000000..49f9aa2
--- /dev/null
+++ b/board/keymile/kmp204x/qrio.c
@@ -0,0 +1,146 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include "../common/common.h"
+#include "kmp204x.h"
+
+/* QRIO GPIO register offsets */
+#define DIRECT_OFF 0x18
+#define GPRT_OFF 0x1c
+
+int qrio_get_gpio(u8 port_off, u8 gpio_nr)
+{
+ u32 gprt;
+
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ gprt = in_be32(qrio_base + port_off + GPRT_OFF);
+
+ return (gprt >> gpio_nr) & 1U;
+}
+
+void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value)
+{
+ u32 gprt, mask;
+
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ mask = 1U << gpio_nr;
+
+ gprt = in_be32(qrio_base + port_off + GPRT_OFF);
+ if (value)
+ gprt |= mask;
+ else
+ gprt &= ~mask;
+
+ out_be32(qrio_base + port_off + GPRT_OFF, gprt);
+}
+
+void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value)
+{
+ u32 direct, mask;
+
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ mask = 1U << gpio_nr;
+
+ direct = in_be32(qrio_base + port_off + DIRECT_OFF);
+ direct |= mask;
+ out_be32(qrio_base + port_off + DIRECT_OFF, direct);
+
+ qrio_set_gpio(port_off, gpio_nr, value);
+}
+
+void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr)
+{
+ u32 direct, mask;
+
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ mask = 1U << gpio_nr;
+
+ direct = in_be32(qrio_base + port_off + DIRECT_OFF);
+ direct &= ~mask;
+ out_be32(qrio_base + port_off + DIRECT_OFF, direct);
+}
+
+void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val)
+{
+ u32 direct, mask;
+
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ mask = 1U << gpio_nr;
+
+ direct = in_be32(qrio_base + port_off + DIRECT_OFF);
+ if (val == 0)
+ /* set to output -> GPIO drives low */
+ direct |= mask;
+ else
+ /* set to input -> GPIO floating */
+ direct &= ~mask;
+
+ out_be32(qrio_base + port_off + DIRECT_OFF, direct);
+}
+
+#define WDMASK_OFF 0x16
+
+static void qrio_wdmask(u8 bit, bool wden)
+{
+ u16 wdmask;
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ wdmask = in_be16(qrio_base + WDMASK_OFF);
+
+ if (wden)
+ wdmask |= (1 << bit);
+ else
+ wdmask &= ~(1 << bit);
+
+ out_be16(qrio_base + WDMASK_OFF, wdmask);
+}
+
+#define PRST_OFF 0x1a
+
+void qrio_prst(u8 bit, bool en, bool wden)
+{
+ u16 prst;
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ qrio_wdmask(bit, wden);
+
+ prst = in_be16(qrio_base + PRST_OFF);
+
+ if (en)
+ prst &= ~(1 << bit);
+ else
+ prst |= (1 << bit);
+
+ out_be16(qrio_base + PRST_OFF, prst);
+}
+
+#define PRSTCFG_OFF 0x1c
+
+void qrio_prstcfg(u8 bit, u8 mode)
+{
+ u32 prstcfg;
+ u8 i;
+ void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+ prstcfg = in_be32(qrio_base + PRSTCFG_OFF);
+
+ for (i = 0; i < 2; i++) {
+ if (mode & (1<<i))
+ set_bit(2*bit+i, &prstcfg);
+ else
+ clear_bit(2*bit+i, &prstcfg);
+ }
+
+ out_be32(qrio_base + PRSTCFG_OFF, prstcfg);
+}
diff --git a/board/keymile/kmp204x/rcw_kmp204x.cfg b/board/keymile/kmp204x/rcw_kmp204x.cfg
index f2b7fe3..2d4c48c 100644
--- a/board/keymile/kmp204x/rcw_kmp204x.cfg
+++ b/board/keymile/kmp204x/rcw_kmp204x.cfg
@@ -7,5 +7,5 @@ aa55aa55 010e0100
#64 bytes RCW data
14600000 00000000 28200000 00000000
148E70CF CFC02000 58000000 41000000
-00000000 00000000 00000000 F4428002
+00000000 00000000 00000000 F0428002
00000000 00000000 00000000 00000000
diff --git a/boards.cfg b/boards.cfg
index 2dfd2b4..706ec96 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -990,6 +990,7 @@ Active powerpc mpc85xx - gdsys p1022
Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD_DEVELOP controlcenterd:36BIT,SDCARD,DEVELOP Dirk Eibach <eibach@gdsys.de>
Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER controlcenterd:TRAILBLAZER,SPIFLASH Dirk Eibach <eibach@gdsys.de>
Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER_DEVELOP controlcenterd:TRAILBLAZER,SPIFLASH,DEVELOP Dirk Eibach <eibach@gdsys.de>
+Active powerpc mpc85xx - keymile kmp204x kmcoge4 kmp204x:KMCOGE4 Valentin Longchamp <valentin.longchamp@keymile.com>
Active powerpc mpc85xx - keymile kmp204x kmlion1 kmp204x:KMLION1 Valentin Longchamp <valentin.longchamp@keymile.com>
Active powerpc mpc85xx - stx stxgp3 stxgp3 - Dan Malek <dan@embeddedalley.com>
Active powerpc mpc85xx - stx stxssa stxssa stxssa Dan Malek <dan@embeddedalley.com>
diff --git a/doc/README.b4860qds b/doc/README.b4860qds
index f8a79db..3da77d9 100644
--- a/doc/README.b4860qds
+++ b/doc/README.b4860qds
@@ -230,14 +230,14 @@ NOR Flash memory Map on B4860 and B4420QDS
0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
-0xEF300000 0xEFF3FFFF rootfs (alternate bank) 12MB + 256KB
+0xEF300000 0xEFEFFFFF rootfs (alternate bank) 12MB
0xEE800000 0xEE8FFFFF device tree (alternate bank) 1MB
0xEE020000 0xEE6FFFFF Linux.uImage (alternate bank) 6MB+896KB
0xEE000000 0xEE01FFFF RCW (alternate bank) 128KB
0xEDF40000 0xEDFFFFFF u-boot (alternate bank) 768KB
0xEDF20000 0xEDF3FFFF u-boot env (alternate bank) 128KB
0xEDF00000 0xEDF1FFFF FMAN ucode (alternate bank) 128KB
-0xED300000 0xEDF3FFFF rootfs (current bank) 12MB+256MB
+0xED300000 0xEDEFFFFF rootfs (current bank) 12MB
0xEC800000 0xEC8FFFFF device tree (current bank) 1MB
0xEC020000 0xEC6FFFFF Linux.uImage (current bank) 6MB+896KB
0xEC000000 0xEC01FFFF RCW (current bank) 128KB
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 1808a7f..be5a16a 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -230,8 +230,8 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
ctrl->page = page_addr;
/* Program ROW0/COL0 */
- out_be32(&ifc->ifc_nand.row0, page_addr);
- out_be32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column);
+ ifc_out32(&ifc->ifc_nand.row0, page_addr);
+ ifc_out32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column);
buf_num = page_addr & priv->bufnum_mask;
@@ -294,23 +294,23 @@ static int fsl_ifc_run_command(struct mtd_info *mtd)
int i;
/* set the chip select for NAND Transaction */
- out_be32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
+ ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
/* start read/write seq */
- out_be32(&ifc->ifc_nand.nandseq_strt,
- IFC_NAND_SEQ_STRT_FIR_STRT);
+ ifc_out32(&ifc->ifc_nand.nandseq_strt,
+ IFC_NAND_SEQ_STRT_FIR_STRT);
/* wait for NAND Machine complete flag or timeout */
end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
while (end_tick > get_ticks()) {
- ctrl->status = in_be32(&ifc->ifc_nand.nand_evter_stat);
+ ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat);
if (ctrl->status & IFC_NAND_EVTER_STAT_OPC)
break;
}
- out_be32(&ifc->ifc_nand.nand_evter_stat, ctrl->status);
+ ifc_out32(&ifc->ifc_nand.nand_evter_stat, ctrl->status);
if (ctrl->status & IFC_NAND_EVTER_STAT_FTOER)
printf("%s: Flash Time Out Error\n", __func__);
@@ -324,7 +324,7 @@ static int fsl_ifc_run_command(struct mtd_info *mtd)
int sector_end = sector + chip->ecc.steps - 1;
for (i = sector / 4; i <= sector_end / 4; i++)
- eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
+ eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]);
for (i = sector; i <= sector_end; i++) {
errors = check_read_ecc(mtd, ctrl, eccstat, i);
@@ -364,30 +364,30 @@ static void fsl_ifc_do_read(struct nand_chip *chip,
/* Program FIR/IFC_NAND_FCR0 for Small/Large page */
if (mtd->writesize > 512) {
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
- (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
- (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
-
- out_be32(&ifc->ifc_nand.nand_fcr0,
- (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
- (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0);
+
+ ifc_out32(&ifc->ifc_nand.nand_fcr0,
+ (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
} else {
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
- (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT));
if (oob)
- out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT);
+ ifc_out32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT);
else
- out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
+ ifc_out32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
}
}
@@ -408,7 +408,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
switch (command) {
/* READ0 read the entire buffer to use hardware ECC. */
case NAND_CMD_READ0: {
- out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+ ifc_out32(&ifc->ifc_nand.nand_fbcr, 0);
set_addr(mtd, 0, page_addr, 0);
ctrl->read_bytes = mtd->writesize + mtd->oobsize;
@@ -424,7 +424,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* READOOB reads only the OOB because no ECC is performed. */
case NAND_CMD_READOOB:
- out_be32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column);
+ ifc_out32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column);
set_addr(mtd, column, page_addr, 1);
ctrl->read_bytes = mtd->writesize + mtd->oobsize;
@@ -441,19 +441,19 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
if (command == NAND_CMD_PARAM)
timing = IFC_FIR_OP_RBCD;
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
- (timing << IFC_NAND_FIR0_OP2_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fcr0,
- command << IFC_NAND_FCR0_CMD0_SHIFT);
- out_be32(&ifc->ifc_nand.row3, column);
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
+ (timing << IFC_NAND_FIR0_OP2_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fcr0,
+ command << IFC_NAND_FCR0_CMD0_SHIFT);
+ ifc_out32(&ifc->ifc_nand.row3, column);
/*
* although currently it's 8 bytes for READID, we always read
* the maximum 256 bytes(for PARAM)
*/
- out_be32(&ifc->ifc_nand.nand_fbcr, 256);
+ ifc_out32(&ifc->ifc_nand.nand_fbcr, 256);
ctrl->read_bytes = 256;
set_addr(mtd, 0, 0, 0);
@@ -468,16 +468,16 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* ERASE2 uses the block and page address from ERASE1 */
case NAND_CMD_ERASE2:
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fcr0,
- (NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
- (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fcr0,
+ (NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+ ifc_out32(&ifc->ifc_nand.nand_fbcr, 0);
ctrl->read_bytes = 0;
fsl_ifc_run_command(mtd);
return;
@@ -494,17 +494,18 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) |
(NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT);
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
- (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
- (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir1,
- (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) |
- (IFC_FIR_OP_RDSTAT <<
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_WBCD <<
+ IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fir1,
+ (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) |
+ (IFC_FIR_OP_RDSTAT <<
IFC_NAND_FIR1_OP6_SHIFT) |
- (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT));
+ (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT));
} else {
nand_fcr0 = ((NAND_CMD_PAGEPROG <<
IFC_NAND_FCR0_CMD1_SHIFT) |
@@ -513,18 +514,18 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
(NAND_CMD_STATUS <<
IFC_NAND_FCR0_CMD3_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
- (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir1,
- (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) |
- (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) |
- (IFC_FIR_OP_RDSTAT <<
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fir1,
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) |
+ (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) |
+ (IFC_FIR_OP_RDSTAT <<
IFC_NAND_FIR1_OP7_SHIFT) |
- (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT));
+ (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT));
if (column >= mtd->writesize)
nand_fcr0 |=
@@ -539,7 +540,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
column -= mtd->writesize;
ctrl->oob = 1;
}
- out_be32(&ifc->ifc_nand.nand_fcr0, nand_fcr0);
+ ifc_out32(&ifc->ifc_nand.nand_fcr0, nand_fcr0);
set_addr(mtd, column, page_addr, ctrl->oob);
return;
}
@@ -547,21 +548,21 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
case NAND_CMD_PAGEPROG:
if (ctrl->oob)
- out_be32(&ifc->ifc_nand.nand_fbcr,
- ctrl->index - ctrl->column);
+ ifc_out32(&ifc->ifc_nand.nand_fbcr,
+ ctrl->index - ctrl->column);
else
- out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+ ifc_out32(&ifc->ifc_nand.nand_fbcr, 0);
fsl_ifc_run_command(mtd);
return;
case NAND_CMD_STATUS:
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT);
- out_be32(&ifc->ifc_nand.nand_fbcr, 1);
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT);
+ ifc_out32(&ifc->ifc_nand.nand_fbcr, 1);
set_addr(mtd, 0, 0, 0);
ctrl->read_bytes = 1;
@@ -572,10 +573,10 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
return;
case NAND_CMD_RESET:
- out_be32(&ifc->ifc_nand.nand_fir0,
- IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT);
- out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT);
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT);
+ ifc_out32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT);
fsl_ifc_run_command(mtd);
return;
@@ -647,8 +648,8 @@ static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd)
* next byte.
*/
if (ctrl->index < ctrl->read_bytes) {
- data = in_be16((uint16_t *)&ctrl->
- addr[ctrl->index]);
+ data = ifc_in16((uint16_t *)&ctrl->
+ addr[ctrl->index]);
ctrl->index += 2;
return (uint8_t)data;
}
@@ -727,12 +728,12 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
return NAND_STATUS_FAIL;
/* Use READ_STATUS command, but wait for the device to be ready */
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS <<
- IFC_NAND_FCR0_CMD0_SHIFT);
- out_be32(&ifc->ifc_nand.nand_fbcr, 1);
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS <<
+ IFC_NAND_FCR0_CMD0_SHIFT);
+ ifc_out32(&ifc->ifc_nand.nand_fbcr, 1);
set_addr(mtd, 0, 0, 0);
ctrl->read_bytes = 1;
@@ -741,7 +742,7 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
if (ctrl->status != IFC_NAND_EVTER_STAT_OPC)
return NAND_STATUS_FAIL;
- nand_fsr = in_be32(&ifc->ifc_nand.nand_fsr);
+ nand_fsr = ifc_in32(&ifc->ifc_nand.nand_fsr);
/* Chip sometimes reporting write protect even when it's not */
nand_fsr = nand_fsr | NAND_STATUS_WP;
@@ -784,17 +785,17 @@ static void fsl_ifc_ctrl_init(void)
ifc_ctrl->regs = IFC_BASE_ADDR;
/* clear event registers */
- out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_stat, ~0U);
- out_be32(&ifc_ctrl->regs->ifc_nand.pgrdcmpl_evt_stat, ~0U);
+ ifc_out32(&ifc_ctrl->regs->ifc_nand.nand_evter_stat, ~0U);
+ ifc_out32(&ifc_ctrl->regs->ifc_nand.pgrdcmpl_evt_stat, ~0U);
/* Enable error and event for any detected errors */
- out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_en,
- IFC_NAND_EVTER_EN_OPC_EN |
- IFC_NAND_EVTER_EN_PGRDCMPL_EN |
- IFC_NAND_EVTER_EN_FTOER_EN |
- IFC_NAND_EVTER_EN_WPER_EN);
+ ifc_out32(&ifc_ctrl->regs->ifc_nand.nand_evter_en,
+ IFC_NAND_EVTER_EN_OPC_EN |
+ IFC_NAND_EVTER_EN_PGRDCMPL_EN |
+ IFC_NAND_EVTER_EN_FTOER_EN |
+ IFC_NAND_EVTER_EN_WPER_EN);
- out_be32(&ifc_ctrl->regs->ifc_nand.ncfgr, 0x0);
+ ifc_out32(&ifc_ctrl->regs->ifc_nand.ncfgr, 0x0);
}
static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip)
@@ -810,50 +811,50 @@ static void fsl_ifc_sram_init(void)
cs = ifc_ctrl->cs_nand >> IFC_NAND_CSEL_SHIFT;
/* Save CSOR and CSOR_ext */
- csor = in_be32(&ifc_ctrl->regs->csor_cs[cs].csor);
- csor_ext = in_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext);
+ csor = ifc_in32(&ifc_ctrl->regs->csor_cs[cs].csor);
+ csor_ext = ifc_in32(&ifc_ctrl->regs->csor_cs[cs].csor_ext);
/* chage PageSize 8K and SpareSize 1K*/
csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000;
- out_be32(&ifc_ctrl->regs->csor_cs[cs].csor, csor_8k);
- out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, 0x0000400);
+ ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor, csor_8k);
+ ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, 0x0000400);
/* READID */
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
- out_be32(&ifc->ifc_nand.row3, 0x0);
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
+ ifc_out32(&ifc->ifc_nand.row3, 0x0);
- out_be32(&ifc->ifc_nand.nand_fbcr, 0x0);
+ ifc_out32(&ifc->ifc_nand.nand_fbcr, 0x0);
/* Program ROW0/COL0 */
- out_be32(&ifc->ifc_nand.row0, 0x0);
- out_be32(&ifc->ifc_nand.col0, 0x0);
+ ifc_out32(&ifc->ifc_nand.row0, 0x0);
+ ifc_out32(&ifc->ifc_nand.col0, 0x0);
/* set the chip select for NAND Transaction */
- out_be32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
+ ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
/* start read seq */
- out_be32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
+ ifc_out32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
/* wait for NAND Machine complete flag or timeout */
end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
while (end_tick > get_ticks()) {
- ifc_ctrl->status = in_be32(&ifc->ifc_nand.nand_evter_stat);
+ ifc_ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat);
if (ifc_ctrl->status & IFC_NAND_EVTER_STAT_OPC)
break;
}
- out_be32(&ifc->ifc_nand.nand_evter_stat, ifc_ctrl->status);
+ ifc_out32(&ifc->ifc_nand.nand_evter_stat, ifc_ctrl->status);
/* Restore CSOR and CSOR_ext */
- out_be32(&ifc_ctrl->regs->csor_cs[cs].csor, csor);
- out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, csor_ext);
+ ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor, csor);
+ ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, csor_ext);
}
static int fsl_ifc_chip_init(int devnum, u8 *addr)
@@ -883,8 +884,8 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) {
phys_addr_t phys_addr = virt_to_phys(addr);
- cspr = in_be32(&ifc_ctrl->regs->cspr_cs[priv->bank].cspr);
- csor = in_be32(&ifc_ctrl->regs->csor_cs[priv->bank].csor);
+ cspr = ifc_in32(&ifc_ctrl->regs->cspr_cs[priv->bank].cspr);
+ csor = ifc_in32(&ifc_ctrl->regs->csor_cs[priv->bank].csor);
if ((cspr & CSPR_V) && (cspr & CSPR_MSEL) == CSPR_MSEL_NAND &&
(cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr)) {
@@ -1004,7 +1005,7 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
nand->ecc.mode = NAND_ECC_SOFT;
}
- ver = in_be32(&ifc_ctrl->regs->ifc_rev);
+ ver = ifc_in32(&ifc_ctrl->regs->ifc_rev);
if (ver == FSL_IFC_V1_1_0)
fsl_ifc_sram_init();
diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c
index 6b43496..2f82f7c 100644
--- a/drivers/mtd/nand/fsl_ifc_spl.c
+++ b/drivers/mtd/nand/fsl_ifc_spl.c
@@ -60,7 +60,7 @@ static inline void nand_wait(uchar *buf, int bufnum, int page_size)
bufnum_end = bufnum + bufperpage - 1;
do {
- status = in_be32(&ifc->ifc_nand.nand_evter_stat);
+ status = ifc_in32(&ifc->ifc_nand.nand_evter_stat);
} while (!(status & IFC_NAND_EVTER_STAT_OPC));
if (status & IFC_NAND_EVTER_STAT_FTOER) {
@@ -70,14 +70,14 @@ static inline void nand_wait(uchar *buf, int bufnum, int page_size)
}
for (i = bufnum / 4; i <= bufnum_end / 4; i++)
- eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
+ eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]);
for (i = bufnum; i <= bufnum_end; i++) {
if (check_read_ecc(buf, eccstat, i, page_size))
break;
}
- out_be32(&ifc->ifc_nand.nand_evter_stat, status);
+ ifc_out32(&ifc->ifc_nand.nand_evter_stat, status);
}
static inline int bad_block(uchar *marker, int port_size)
@@ -140,38 +140,38 @@ static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst)
blk_size = pages_per_blk * page_size;
/* Open Full SRAM mapping for spare are access */
- out_be32(&ifc->ifc_nand.ncfgr, 0x0);
+ ifc_out32(&ifc->ifc_nand.ncfgr, 0x0);
/* Clear Boot events */
- out_be32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff);
+ ifc_out32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff);
/* Program FIR/FCR for Large/Small page */
if (page_size > 512) {
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
- (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
- (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
-
- out_be32(&ifc->ifc_nand.nand_fcr0,
- (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
- (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0);
+
+ ifc_out32(&ifc->ifc_nand.nand_fcr0,
+ (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
} else {
- out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
- (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
- (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
- (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT));
- out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
-
- out_be32(&ifc->ifc_nand.nand_fcr0,
- NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
+ ifc_out32(&ifc->ifc_nand.nand_fir0,
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT));
+ ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0);
+
+ ifc_out32(&ifc->ifc_nand.nand_fcr0,
+ NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
}
/* Program FBCR = 0 for full page read */
- out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+ ifc_out32(&ifc->ifc_nand.nand_fbcr, 0);
/* Read and copy u-boot on SDRAM from NAND device, In parallel
* check for Bad block if found skip it and read continue to
@@ -184,11 +184,11 @@ static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst)
bufnum = pg_no & bufnum_mask;
sram_addr = bufnum * page_size * 2;
- out_be32(&ifc->ifc_nand.row0, pg_no);
- out_be32(&ifc->ifc_nand.col0, 0);
+ ifc_out32(&ifc->ifc_nand.row0, pg_no);
+ ifc_out32(&ifc->ifc_nand.col0, 0);
/* start read */
- out_be32(&ifc->ifc_nand.nandseq_strt,
- IFC_NAND_SEQ_STRT_FIR_STRT);
+ ifc_out32(&ifc->ifc_nand.nandseq_strt,
+ IFC_NAND_SEQ_STRT_FIR_STRT);
/* wait for read to complete */
nand_wait(&buf[sram_addr], bufnum, page_size);
diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c
index 83cf081..bcc871d 100644
--- a/drivers/net/fm/t1040.c
+++ b/drivers/net/fm/t1040.c
@@ -12,5 +12,61 @@
phy_interface_t fman_port_enet_if(enum fm_port port)
{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+
+ /* handle RGMII first */
+ if ((port == FM1_DTSEC2) &&
+ ((rcwsr13 & FSL_CORENET_RCWSR13_MAC2_GMII_SEL) ==
+ FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT)) {
+ if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
+ FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_RGMII)
+ return PHY_INTERFACE_MODE_RGMII;
+ else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
+ FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII)
+ return PHY_INTERFACE_MODE_MII;
+ else
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
+ if ((port == FM1_DTSEC4) &&
+ ((rcwsr13 & FSL_CORENET_RCWSR13_MAC2_GMII_SEL) ==
+ FSL_CORENET_RCWSR13_MAC2_GMII_SEL_L2_SWITCH)) {
+ if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
+ FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_RGMII)
+ return PHY_INTERFACE_MODE_RGMII;
+ else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
+ FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII)
+ return PHY_INTERFACE_MODE_MII;
+ else
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
+ if (port == FM1_DTSEC5) {
+ if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+ FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII)
+ return PHY_INTERFACE_MODE_RGMII;
+ else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+ FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII)
+ return PHY_INTERFACE_MODE_MII;
+ else
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ if (is_serdes_configured(QSGMII_SW1_A + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_QSGMII;
+ case FM1_DTSEC3:
+ case FM1_DTSEC4:
+ case FM1_DTSEC5:
+ if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
return PHY_INTERFACE_MODE_NONE;
}
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 2085cd6..6317fb1 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -510,8 +510,8 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
/* Print the negotiated PCIe link width */
pci_hose_read_config_word(hose, dev, pci_lsr, &temp16);
- printf("x%d, regs @ 0x%lx\n", (temp16 & 0x3f0 ) >> 4,
- pci_info->regs);
+ printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4,
+ (temp16 & 0xf), pci_info->regs);
hose->current_busno++; /* Start scan with secondary */
pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 8234a82..75ea125 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -611,9 +611,8 @@ unsigned long get_board_ddr_clk(void);
#endif
#ifdef CONFIG_FMAN_ENET
-#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10
-#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11
-#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4
+#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x01
+#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x02
#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c
#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d
diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h
index 5e988c2..7cfda50 100644
--- a/include/configs/T1040RDB.h
+++ b/include/configs/T1040RDB.h
@@ -79,10 +79,6 @@
#if defined(CONFIG_SPIFLASH)
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_BUS 0
-#define CONFIG_ENV_SPI_CS 0
-#define CONFIG_ENV_SPI_MAX_HZ 10000000
-#define CONFIG_ENV_SPI_MODE 0
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
#define CONFIG_ENV_SECT_SIZE 0x10000
@@ -202,6 +198,7 @@
/* CPLD on IFC */
#define CONFIG_SYS_CPLD_BASE 0xffdf0000
#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
+#define CONFIG_SYS_CSPR2_EXT (0xf)
#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
| CSPR_PORT_SIZE_8 \
| CSPR_MSEL_GPCM \
@@ -386,6 +383,10 @@
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED 10000000
#define CONFIG_SF_DEFAULT_MODE 0
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 10000000
+#define CONFIG_ENV_SPI_MODE 0
/*
* General PCI
@@ -543,13 +544,12 @@
#endif
#ifdef CONFIG_FMAN_ENET
-#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c
-#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d
-#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e
-#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f
+#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03
+#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01
+#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02
#define CONFIG_MII /* MII PHY management */
-#define CONFIG_ETHPRIME "FM1@DTSEC1"
+#define CONFIG_ETHPRIME "FM1@DTSEC4"
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
#endif
@@ -627,9 +627,9 @@
#define __USB_PHY_TYPE utmi
#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
- "bank_intlv=cs0_cs1;" \
- "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
+ "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \
+ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
+ "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h
index aafa813..ed9ca8a 100644
--- a/include/configs/T1042RDB_PI.h
+++ b/include/configs/T1042RDB_PI.h
@@ -79,10 +79,6 @@
#if defined(CONFIG_SPIFLASH)
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_BUS 0
-#define CONFIG_ENV_SPI_CS 0
-#define CONFIG_ENV_SPI_MAX_HZ 10000000
-#define CONFIG_ENV_SPI_MODE 0
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
#define CONFIG_ENV_SECT_SIZE 0x10000
@@ -202,6 +198,7 @@
/* CPLD on IFC */
#define CONFIG_SYS_CPLD_BASE 0xffdf0000
#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
+#define CONFIG_SYS_CSPR2_EXT (0xf)
#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
| CSPR_PORT_SIZE_8 \
| CSPR_MSEL_GPCM \
@@ -394,6 +391,10 @@
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED 10000000
#define CONFIG_SF_DEFAULT_MODE 0
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 10000000
+#define CONFIG_ENV_SPI_MODE 0
/*
* General PCI
@@ -551,8 +552,11 @@
#endif
#ifdef CONFIG_FMAN_ENET
+#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01
+#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02
+
#define CONFIG_MII /* MII PHY management */
-#define CONFIG_ETHPRIME "FM1@DTSEC1"
+#define CONFIG_ETHPRIME "FM1@DTSEC4"
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
#endif
@@ -631,9 +635,9 @@
#define __USB_PHY_TYPE utmi
#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
- "bank_intlv=cs0_cs1;" \
- "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
+ "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \
+ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
+ "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index 2a15ad4..a4e0f7c 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -99,11 +99,16 @@
#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
#endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */
+#ifndef CONFIG_KM_UBI_PART_BOOT_OPTS
+#define CONFIG_KM_UBI_PART_BOOT_OPTS ""
+#endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */
+
#ifndef CONFIG_KM_UBI_PARTITION_NAME_APP
/* one flash chip only called boot */
/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
# define CONFIG_KM_UBI_LINUX_MTD \
- "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT
+ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \
+ CONFIG_KM_UBI_PART_BOOT_OPTS
# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \
"ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0"
#else /* CONFIG_KM_UBI_PARTITION_NAME_APP */
@@ -111,7 +116,8 @@
/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
/* app: CONFIG_KM_UBI_PARTITION_NAME_APP */
# define CONFIG_KM_UBI_LINUX_MTD \
- "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT " " \
+ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \
+ CONFIG_KM_UBI_PART_BOOT_OPTS " " \
"ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP
# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \
"ubiattach=if test ${boot_bank} -eq 0; then; " \
diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index 2466649..b9e1bac 100644
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -15,6 +15,10 @@
#define CONFIG_KM_DEF_NETDEV "netdev=eth0\0"
+/* an additionnal option is required for UBI as subpage access is
+ * supported in u-boot */
+#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
+
#define CONFIG_NAND_ECC_BCH
/* common KM defines */
@@ -148,8 +152,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */
#define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */
-#define CONFIG_BOOTCOUNT_LIMIT
-
/*
* Local Bus Definitions
*/
@@ -206,8 +208,13 @@ unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */
#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */
+/* bootcounter in QRIO */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_QRIO_BASE + 0x20)
+
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
+#define CONFIG_MISC_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_LAST_STAGE_INIT
@@ -263,7 +270,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
/* I2C */
+
#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_SYS_I2C_SPEED 100000 /* deblocking */
#define CONFIG_SYS_NUM_I2C_BUSES 3
#define CONFIG_SYS_I2C_MAX_HOPS 1
#define CONFIG_SYS_I2C_FSL /* Use FSL I2C driver */
@@ -276,6 +286,12 @@ unsigned long get_board_sys_clk(unsigned long dummy);
{0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \
{0, {{I2C_MUX_PCA9547, 0x70, 2 } } }, \
}
+#ifndef __ASSEMBLY__
+void set_sda(int state);
+void set_scl(int state);
+int get_sda(void);
+int get_scl(void);
+#endif
#define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/
@@ -286,6 +302,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_BAR /* 4 byte-addressing */
#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED 20000000
#define CONFIG_SF_DEFAULT_MODE 0
diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h
index 4158c8d..8bb3571 100644
--- a/include/configs/kmp204x.h
+++ b/include/configs/kmp204x.h
@@ -13,6 +13,11 @@
#define CONFIG_HOSTNAME kmlion1
#define CONFIG_KM_BOARD_NAME "kmlion1"
+/* KMCOGE4 */
+#elif defined(CONFIG_KMCOGE4)
+#define CONFIG_HOSTNAME kmcoge4
+#define CONFIG_KM_BOARD_NAME "kmcoge4"
+
#else
#error ("Board not supported")
#endif
@@ -42,6 +47,7 @@
#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_LBAPP1_BR_PRELIM
/* Local bus app1 Options */
#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_LBAPP1_OR_PRELIM
+#endif
/* App2 Local bus */
#define CONFIG_SYS_LBAPP2_BASE 0xE0000000
@@ -63,6 +69,5 @@
#define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_LBAPP2_BR_PRELIM
/* Local bus app2 Options */
#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_LBAPP2_OR_PRELIM
-#endif
#endif /* __CONFIG_H */
diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h
index be6c107..58a6efd 100644
--- a/include/fsl_ifc.h
+++ b/include/fsl_ifc.h
@@ -12,6 +12,20 @@
#include <config.h>
#include <common.h>
+
+#ifdef CONFIG_SYS_FSL_IFC_LE
+#define ifc_in32(a) in_le32(a)
+#define ifc_out32(a, v) out_le32(a, v)
+#define ifc_in16(a) in_le16(a)
+#elif defined(CONFIG_SYS_FSL_IFC_BE)
+#define ifc_in32(a) in_be32(a)
+#define ifc_out32(a, v) out_be32(a, v)
+#define ifc_in16(a) in_be16(a)
+#else
+#error Neither CONFIG_SYS_FSL_IFC_LE nor CONFIG_SYS_FSL_IFC_BE is defined
+#endif
+
+
/*
* CSPR - Chip Select Property Register
*/
@@ -773,20 +787,22 @@ extern void init_early_memctl_regs(void);
#define IFC_BASE_ADDR ((struct fsl_ifc *)CONFIG_SYS_IFC_ADDR)
-#define get_ifc_cspr_ext(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext))
-#define get_ifc_cspr(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr))
-#define get_ifc_csor_ext(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext))
-#define get_ifc_csor(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor))
-#define get_ifc_amask(i) (in_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask))
-#define get_ifc_ftim(i, j) (in_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j]))
-
-#define set_ifc_cspr_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext, v))
-#define set_ifc_cspr(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v))
-#define set_ifc_csor_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext, v))
-#define set_ifc_csor(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v))
-#define set_ifc_amask(i, v) (out_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v))
+#define get_ifc_cspr_ext(i) (ifc_in32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext))
+#define get_ifc_cspr(i) (ifc_in32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr))
+#define get_ifc_csor_ext(i) (ifc_in32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext))
+#define get_ifc_csor(i) (ifc_in32(&(IFC_BASE_ADDR)->csor_cs[i].csor))
+#define get_ifc_amask(i) (ifc_in32(&(IFC_BASE_ADDR)->amask_cs[i].amask))
+#define get_ifc_ftim(i, j) (ifc_in32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j]))
+
+#define set_ifc_cspr_ext(i, v) \
+ (ifc_out32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext, v))
+#define set_ifc_cspr(i, v) (ifc_out32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v))
+#define set_ifc_csor_ext(i, v) \
+ (ifc_out32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext, v))
+#define set_ifc_csor(i, v) (ifc_out32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v))
+#define set_ifc_amask(i, v) (ifc_out32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v))
#define set_ifc_ftim(i, j, v) \
- (out_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v))
+ (ifc_out32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v))
enum ifc_chip_sel {
IFC_CS0,