summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMarek Vasut <marex@denx.de>2012-07-06 21:25:55 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-09-01 14:58:17 +0200
commit869833285b48fd51e0319ff2cede2744331a1e10 (patch)
treef127d9a0b6d1fab4591ef83393731a4f6d687f73
parent401650a19c9c1d197e9791e82c5fc5af1ed6619d (diff)
downloadu-boot-imx-869833285b48fd51e0319ff2cede2744331a1e10.zip
u-boot-imx-869833285b48fd51e0319ff2cede2744331a1e10.tar.gz
u-boot-imx-869833285b48fd51e0319ff2cede2744331a1e10.tar.bz2
MX28: Split out the PIO and DMA transfer functions
Move DMA and PIO data transfer parts into separate functions. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
-rw-r--r--drivers/mmc/mxsmmc.c154
1 files changed, 86 insertions, 68 deletions
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index 2480a8a..8e2016f 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -62,6 +62,85 @@ struct mxsmmc_priv {
#define MXSMMC_MAX_TIMEOUT 10000
+#ifndef CONFIG_MXS_MMC_DMA
+static int mxsmmc_send_cmd_pio(struct mxsmmc_priv *priv, struct mmc_data *data)
+{
+ struct mxs_ssp_regs *ssp_regs = priv->regs;
+ uint32_t *data_ptr;
+ int timeout = MXSMMC_MAX_TIMEOUT;
+ uint32_t reg;
+ uint32_t data_count = data->blocksize * data->blocks;
+
+ if (data->flags & MMC_DATA_READ) {
+ data_ptr = (uint32_t *)data->dest;
+ while (data_count && --timeout) {
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (!(reg & SSP_STATUS_FIFO_EMPTY)) {
+ *data_ptr++ = readl(&ssp_regs->hw_ssp_data);
+ data_count -= 4;
+ timeout = MXSMMC_MAX_TIMEOUT;
+ } else
+ udelay(1000);
+ }
+ } else {
+ data_ptr = (uint32_t *)data->src;
+ timeout *= 100;
+ while (data_count && --timeout) {
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (!(reg & SSP_STATUS_FIFO_FULL)) {
+ writel(*data_ptr++, &ssp_regs->hw_ssp_data);
+ data_count -= 4;
+ timeout = MXSMMC_MAX_TIMEOUT;
+ } else
+ udelay(1000);
+ }
+ }
+
+ return timeout ? 0 : COMM_ERR;
+}
+#else
+static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
+{
+ uint32_t data_count = data->blocksize * data->blocks;
+ uint32_t cache_data_count;
+ int dmach;
+
+ if (data_count % ARCH_DMA_MINALIGN)
+ cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN);
+ else
+ cache_data_count = data_count;
+
+ if (data->flags & MMC_DATA_READ) {
+ priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE;
+ priv->desc->cmd.address = (dma_addr_t)data->dest;
+ } else {
+ priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ;
+ priv->desc->cmd.address = (dma_addr_t)data->src;
+
+ /* Flush data to DRAM so DMA can pick them up */
+ flush_dcache_range((uint32_t)priv->desc->cmd.address,
+ (uint32_t)(priv->desc->cmd.address + cache_data_count));
+ }
+
+ priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
+ (data_count << MXS_DMA_DESC_BYTES_OFFSET);
+
+
+ dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
+ mxs_dma_desc_append(dmach, priv->desc);
+ if (mxs_dma_go(dmach))
+ return COMM_ERR;
+
+ /* The data arrived into DRAM, invalidate cache over them */
+ if (data->flags & MMC_DATA_READ) {
+ invalidate_dcache_range((uint32_t)priv->desc->cmd.address,
+ (uint32_t)(priv->desc->cmd.address + cache_data_count));
+ }
+
+ return 0;
+}
+#endif
+
/*
* Sends a command out on the bus. Takes the mmc pointer,
* a command pointer, and an optional data pointer.
@@ -73,14 +152,8 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
struct mxs_ssp_regs *ssp_regs = priv->regs;
uint32_t reg;
int timeout;
- uint32_t data_count;
uint32_t ctrl0;
-#ifndef CONFIG_MXS_MMC_DMA
- uint32_t *data_ptr;
-#else
- uint32_t cache_data_count;
- int dmach;
-#endif
+ int ret;
debug("MMC%d: CMD%d\n", mmc->block_dev.dev, cmd->cmdidx);
@@ -198,77 +271,22 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
if (!data)
return 0;
- data_count = data->blocksize * data->blocks;
- timeout = MXSMMC_MAX_TIMEOUT;
-
#ifdef CONFIG_MXS_MMC_DMA
writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set);
- if (data_count % ARCH_DMA_MINALIGN)
- cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN);
- else
- cache_data_count = data_count;
-
- if (data->flags & MMC_DATA_READ) {
- priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE;
- priv->desc->cmd.address = (dma_addr_t)data->dest;
- } else {
- priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ;
- priv->desc->cmd.address = (dma_addr_t)data->src;
-
- /* Flush data to DRAM so DMA can pick them up */
- flush_dcache_range((uint32_t)priv->desc->cmd.address,
- (uint32_t)(priv->desc->cmd.address + cache_data_count));
- }
-
- priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
- (data_count << MXS_DMA_DESC_BYTES_OFFSET);
-
-
- dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
- mxs_dma_desc_append(dmach, priv->desc);
- if (mxs_dma_go(dmach)) {
+ ret = mxsmmc_send_cmd_dma(priv, data);
+ if (ret) {
printf("MMC%d: DMA transfer failed\n", mmc->block_dev.dev);
- return COMM_ERR;
- }
-
- /* The data arrived into DRAM, invalidate cache over them */
- if (data->flags & MMC_DATA_READ) {
- invalidate_dcache_range((uint32_t)priv->desc->cmd.address,
- (uint32_t)(priv->desc->cmd.address + cache_data_count));
+ return ret;
}
#else
writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr);
- if (data->flags & MMC_DATA_READ) {
- data_ptr = (uint32_t *)data->dest;
- while (data_count && --timeout) {
- reg = readl(&ssp_regs->hw_ssp_status);
- if (!(reg & SSP_STATUS_FIFO_EMPTY)) {
- *data_ptr++ = readl(&ssp_regs->hw_ssp_data);
- data_count -= 4;
- timeout = MXSMMC_MAX_TIMEOUT;
- } else
- udelay(1000);
- }
- } else {
- data_ptr = (uint32_t *)data->src;
- timeout *= 100;
- while (data_count && --timeout) {
- reg = readl(&ssp_regs->hw_ssp_status);
- if (!(reg & SSP_STATUS_FIFO_FULL)) {
- writel(*data_ptr++, &ssp_regs->hw_ssp_data);
- data_count -= 4;
- timeout = MXSMMC_MAX_TIMEOUT;
- } else
- udelay(1000);
- }
- }
-
- if (!timeout) {
+ ret = mxsmmc_send_cmd_pio(priv, data);
+ if (ret) {
printf("MMC%d: Data timeout with command %d (status 0x%08x)!\n",
mmc->block_dev.dev, cmd->cmdidx, reg);
- return COMM_ERR;
+ return ret;
}
#endif