net: gem: Fix gem driver on 1Gbps LAN

The whole driver used 100Mbps because of zc702 rev B.
Fix problem with not setup proper clock for gem1.
This is generic approach for clk setup.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>

4 files changed, 71 insertions, 16 deletions

diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index 788a8fd..5a8674a 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -61,3 +61,29 @@ void zynq_slcr_cpu_reset(void)
 
 	writel(1, &slcr_base->pss_rst_ctrl);
 }
+
+/* Setup clk for network */
+void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk)
+{
+	zynq_slcr_unlock();
+
+	if (gem_id > 1) {
+		printf("Non existing GEM id %d\n", gem_id);
+		goto out;
+	}
+
+	if (gem_id) {
+		/* Set divisors for appropriate frequency in GEM_CLK_CTRL */
+		writel(clk, &slcr_base->gem1_clk_ctrl);
+		/* Configure GEM_RCLK_CTRL */
+		writel(rclk, &slcr_base->gem1_rclk_ctrl);
+	} else {
+		/* Set divisors for appropriate frequency in GEM_CLK_CTRL */
+		writel(clk, &slcr_base->gem0_clk_ctrl);
+		/* Configure GEM_RCLK_CTRL */
+		writel(rclk, &slcr_base->gem0_rclk_ctrl);
+	}
+
+out:
+	zynq_slcr_lock();
+}
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index ccbf54e..d8e378f 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -33,7 +33,12 @@ struct slcr_regs {
 	u32 scl; /* 0x0 */
 	u32 slcr_lock; /* 0x4 */
 	u32 slcr_unlock; /* 0x8 */
-	u32 reserved1[125];
+	u32 reserved0[75];
+	u32 gem0_rclk_ctrl; /* 0x138 */
+	u32 gem1_rclk_ctrl; /* 0x13c */
+	u32 gem0_clk_ctrl; /* 0x140 */
+	u32 gem1_clk_ctrl; /* 0x144 */
+	u32 reserved1[46];
 	u32 pss_rst_ctrl; /* 0x200 */
 	u32 reserved2[15];
 	u32 fpga_rst_ctrl; /* 0x240 */
diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h
index e788900..57128dc 100644
--- a/arch/arm/include/asm/arch-zynq/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynq/sys_proto.h
@@ -26,5 +26,6 @@
 extern void zynq_slcr_lock(void);
 extern void zynq_slcr_unlock(void);
 extern void zynq_slcr_cpu_reset(void);
+extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk);
 
 #endif /* _SYS_PROTO_H_ */
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 7758cf8..2d717e9 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -33,6 +33,7 @@
 #include <phy.h>
 #include <miiphy.h>
 #include <watchdog.h>
+#include <asm/arch/sys_proto.h>
 
 #if !defined(CONFIG_PHYLIB)
 # error XILINX_GEM_ETHERNET requires PHYLIB
@@ -67,13 +68,14 @@
 #define ZYNQ_GEM_NWCTRL_MDEN_MASK	0x00000010 /* Enable MDIO port */
 #define ZYNQ_GEM_NWCTRL_STARTTX_MASK	0x00000200 /* Start tx (tx_go) */
 
-#define ZYNQ_GEM_NWCFG_SPEED		0x00000001 /* 100 Mbps operation */
-#define ZYNQ_GEM_NWCFG_FDEN		0x00000002 /* Full Duplex mode */
-#define ZYNQ_GEM_NWCFG_FSREM		0x00020000 /* FCS removal */
+#define ZYNQ_GEM_NWCFG_SPEED100		0x000000001 /* 100 Mbps operation */
+#define ZYNQ_GEM_NWCFG_SPEED1000	0x000000400 /* 1Gbps operation */
+#define ZYNQ_GEM_NWCFG_FDEN		0x000000002 /* Full Duplex mode */
+#define ZYNQ_GEM_NWCFG_FSREM		0x000020000 /* FCS removal */
 #define ZYNQ_GEM_NWCFG_MDCCLKDIV	0x000080000 /* Div pclk by 32, 80MHz */
+#define ZYNQ_GEM_NWCFG_MDCCLKDIV2	0x0000c0000 /* Div pclk by 48, 120MHz */
 
-#define ZYNQ_GEM_NWCFG_INIT		(ZYNQ_GEM_NWCFG_SPEED | \
-					ZYNQ_GEM_NWCFG_FDEN | \
+#define ZYNQ_GEM_NWCFG_INIT		(ZYNQ_GEM_NWCFG_FDEN | \
 					ZYNQ_GEM_NWCFG_FSREM | \
 					ZYNQ_GEM_NWCFG_MDCCLKDIV)
 
@@ -227,7 +229,7 @@ static int zynq_gem_setup_mac(struct eth_device *dev)
 
 static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 {
-	u32 i;
+	u32 i, rclk, clk = 0;
 	struct phy_device *phydev;
 	const u32 stat_size = (sizeof(struct zynq_gem_regs) -
 				offsetof(struct zynq_gem_regs, stat)) / 4;
@@ -277,16 +279,11 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 		/* Write RxBDs to IP */
 		writel((u32)&(priv->rx_bd), &regs->rxqbase);
 
-		/* MAC Setup */
-		/* Setup Network Configuration register */
-		writel(ZYNQ_GEM_NWCFG_INIT, &regs->nwcfg);
-
 		/* Setup for DMA Configuration register */
 		writel(ZYNQ_GEM_DMACR_INIT, &regs->dmacr);
 
 		/* Setup for Network Control register, MDIO, Rx and Tx enable */
-		setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK |
-			ZYNQ_GEM_NWCTRL_RXEN_MASK | ZYNQ_GEM_NWCTRL_TXEN_MASK);
+		setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK);
 
 		priv->init++;
 	}
@@ -294,12 +291,38 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 	/* interface - look at tsec */
 	phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0);
 
-	phydev->supported &= supported;
+	phydev->supported = supported | ADVERTISED_Pause |
+			    ADVERTISED_Asym_Pause;
 	phydev->advertising = phydev->supported;
 	priv->phydev = phydev;
 	phy_config(phydev);
 	phy_startup(phydev);
 
+	switch (phydev->speed) {
+	case SPEED_1000:
+		writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000,
+		       &regs->nwcfg);
+		rclk = (0 << 4) | (1 << 0);
+		clk = (1 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
+		break;
+	case SPEED_100:
+		clrsetbits_le32(&regs->nwcfg, ZYNQ_GEM_NWCFG_SPEED1000,
+				ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED100);
+		rclk = 1 << 0;
+		clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
+		break;
+	case SPEED_10:
+		rclk = 1 << 0;
+		/* FIXME untested */
+		clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
+		break;
+	}
+	/* FIXME maybe better to define gem address in hardware.h */
+	zynq_slcr_gem_clk_setup(dev->iobase != 0xE000B000, rclk, clk);
+
+	setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
+					ZYNQ_GEM_NWCTRL_TXEN_MASK);
+
 	return 0;
 }
 
@@ -380,8 +403,8 @@ static void zynq_gem_halt(struct eth_device *dev)
 {
 	struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
 
-	/* Disable the receiver & transmitter */
-	writel(0, &regs->nwctrl);
+	clrsetbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
+						ZYNQ_GEM_NWCTRL_TXEN_MASK, 0);
 }
 
 static int zynq_gem_miiphyread(const char *devname, uchar addr,