diff options
| author | Sandeep Paulraj <s-paulraj@ti.com> | 2009-09-29 09:43:04 -0400 |
|---|---|---|
| committer | Tom Rix <Tom.Rix@windriver.com> | 2009-10-04 10:51:31 -0500 |
| commit | 67c3d9fb36bd0e66bd5cbf2719564e01f6459433 (patch) | |
| tree | 81d2147df89568a78c859d58a16ceeddc135c7e5 | |
| parent | 67682a3890ee9f67611934a2a4a35f33c89d8da3 (diff) | |
| download | u-boot-imx-67c3d9fb36bd0e66bd5cbf2719564e01f6459433.zip u-boot-imx-67c3d9fb36bd0e66bd5cbf2719564e01f6459433.tar.gz u-boot-imx-67c3d9fb36bd0e66bd5cbf2719564e01f6459433.tar.bz2 | |
TI: DaVinci DM365: Enabling network Support on DM365 EVM
This patch enables EMAC on the DM365 EVM.
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Acked-by: Tom Rix <Tom.Rix@windriver.com>
| -rw-r--r-- | board/davinci/dm365evm/dm365evm.c | 43 |
1 files changed, 43 insertions, 0 deletions
diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c index 99392b3..5b97060 100644 --- a/board/davinci/dm365evm/dm365evm.c +++ b/board/davinci/dm365evm/dm365evm.c @@ -17,9 +17,12 @@ #include <common.h> #include <nand.h> +#include <asm/io.h> #include <asm/arch/hardware.h> #include <asm/arch/emif_defs.h> #include <asm/arch/nand_defs.h> +#include <asm/arch/gpio_defs.h> +#include <netdev.h> #include "../common/misc.h" DECLARE_GLOBAL_DATA_PTR; @@ -32,6 +35,46 @@ int board_init(void) return 0; } +#ifdef CONFIG_DRIVER_TI_EMAC +int board_eth_init(bd_t *bis) +{ + uint8_t eeprom_enetaddr[6]; + int i; + struct davinci_gpio *gpio1_base = + (struct davinci_gpio *)DAVINCI_GPIO_BANK01; + + /* Configure PINMUX 3 to enable EMAC pins */ + writel((readl(PINMUX3) | 0x1affff), PINMUX3); + + /* Configure GPIO20 as output */ + writel((readl(&gpio1_base->dir) & ~(1 << 20)), &gpio1_base->dir); + + /* Toggle GPIO 20 */ + for (i = 0; i < 20; i++) { + /* GPIO 20 low */ + writel((readl(&gpio1_base->out_data) & ~(1 << 20)), + &gpio1_base->out_data); + + udelay(1000); + + /* GPIO 20 high */ + writel((readl(&gpio1_base->out_data) | (1 << 20)), + &gpio1_base->out_data); + } + + /* Configure I2C pins so that EEPROM can be read */ + writel((readl(PINMUX3) | 0x01400000), PINMUX3); + + /* Read Ethernet MAC address from EEPROM */ + if (dvevm_read_mac_address(eeprom_enetaddr)) + dv_configure_mac_address(eeprom_enetaddr); + + davinci_emac_initialize(); + + return 0; +} +#endif + #ifdef CONFIG_NAND_DAVINCI static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip) { |