summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAdam Graham <agraham@amcc.com>2008-10-08 10:13:14 -0700
committerStefan Roese <sr@denx.de>2008-10-21 17:34:51 +0200
commit59217bae40e90982ab5400d849c08af683ace036 (patch)
tree4b078912658de2b4da186bb71c3dcc70b0e42157
parentf09f09d3899017aaaa2b031bba63c271e9c48e4d (diff)
downloadu-boot-imx-59217bae40e90982ab5400d849c08af683ace036.zip
u-boot-imx-59217bae40e90982ab5400d849c08af683ace036.tar.gz
u-boot-imx-59217bae40e90982ab5400d849c08af683ace036.tar.bz2
ppc4xx: Add static support for 44x IBM SDRAM Controller
This patch add the capability to configure a PPC440 based IBM SDRAM Controller with static, compiled-in, values. PPC440 memory subsystem includes a Memory Queue core. Signed-off-by: Adam Graham <agraham@amcc.com> Signed-off-by: Victor Gallardo <vgallardo@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c71
1 files changed, 53 insertions, 18 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 4544b78..b40e4b1 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -60,6 +60,26 @@
"SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
} while (0)
+#if defined(CONFIG_440)
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2
+ * memory region. Right now the cache should still be disabled in U-Boot
+ * because of the EMAC driver, that need its buffer descriptor to be located
+ * in non cached memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CONFIG_4xx_DCACHE
+/* enable caching on SDRAM */
+#define MY_TLB_WORD2_I_ENABLE 0
+#else
+/* disable caching on SDRAM */
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
+#endif /* CONFIG_4xx_DCACHE */
+#endif /* CONFIG_440 */
+
#if defined(CONFIG_SPD_EEPROM)
/*-----------------------------------------------------------------------------+
@@ -131,22 +151,6 @@
#define NUMLOOPS 64 /* memory test loops */
/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
- * region. Right now the cache should still be disabled in U-Boot because of the
- * EMAC driver, that need it's buffer descriptor to be located in non cached
- * memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#ifdef CONFIG_4xx_DCACHE
-#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
-#else
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
-#endif
-
-/*
* Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
* To support such configurations, we "only" map the first 2GB via the TLB's. We
* need some free virtual address space for the remaining peripherals like, SoC
@@ -2958,9 +2962,10 @@ static void test(void)
/*-----------------------------------------------------------------------------
* Function: initdram
- * Description: Configures the PPC405EX(r) DDR1/DDR2 SDRAM memory
- * banks. The configuration is performed using static, compile-
+ * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller.
+ * The configuration is performed using static, compile-
* time parameters.
+ * Configures the PPC405EX(r) and PPC460EX/GT
*---------------------------------------------------------------------------*/
phys_size_t initdram(int board_type)
{
@@ -2976,6 +2981,18 @@ phys_size_t initdram(int board_type)
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
unsigned long val;
+#if defined(CONFIG_440)
+ mtdcr(SDRAM_R0BAS, CONFIG_SYS_SDRAM_R0BAS);
+ mtdcr(SDRAM_R1BAS, CONFIG_SYS_SDRAM_R1BAS);
+ mtdcr(SDRAM_R2BAS, CONFIG_SYS_SDRAM_R2BAS);
+ mtdcr(SDRAM_R3BAS, CONFIG_SYS_SDRAM_R3BAS);
+ mtdcr(SDRAM_PLBADDULL, CONFIG_SYS_SDRAM_PLBADDULL); /* MQ0_BAUL */
+ mtdcr(SDRAM_PLBADDUHB, CONFIG_SYS_SDRAM_PLBADDUHB); /* MQ0_BAUH */
+ mtdcr(SDRAM_CONF1LL, CONFIG_SYS_SDRAM_CONF1LL);
+ mtdcr(SDRAM_CONF1HB, CONFIG_SYS_SDRAM_CONF1HB);
+ mtdcr(SDRAM_CONFPATHB, CONFIG_SYS_SDRAM_CONFPATHB);
+#endif
+
/* Set Memory Bank Configuration Registers */
mtsdram(SDRAM_MB0CF, CONFIG_SYS_SDRAM0_MB0CF);
@@ -3069,6 +3086,14 @@ phys_size_t initdram(int board_type)
mfsdram(SDRAM_MCOPT2, val);
mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE);
+#if defined(CONFIG_440)
+ /*
+ * Program TLB entries with caches enabled, for best performace
+ * while auto-calibrating and ECC generation
+ */
+ program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), 0);
+#endif
+
#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
/*------------------------------------------------------------------
@@ -3082,6 +3107,16 @@ phys_size_t initdram(int board_type)
ecc_init(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20);
#endif /* defined(CONFIG_DDR_ECC) */
+#if defined(CONFIG_440)
+ /*
+ * Now after initialization (auto-calibration and ECC generation)
+ * remove the TLB entries with caches enabled and program again with
+ * desired cache functionality
+ */
+ remove_tlb(0, (CONFIG_SYS_MBYTES_SDRAM << 20));
+ program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), MY_TLB_WORD2_I_ENABLE);
+#endif
+
ppc4xx_ibm_ddr2_register_dump();
#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)