Merge with /home/stefan/git/u-boot/acadia

23 files changed, 3680 insertions, 167 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 183fb10..68233cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -284,6 +284,7 @@ Stefan Roese <sr@denx.de>
 
 	TQM85xx			MPC8540/8541/8555/8560
 
+	acadia			PPC405EZ
 	alpr			PPC440GX
 	bamboo			PPC440EP
 	bunbinga		PPC405EP
diff --git a/MAKEALL b/MAKEALL
index 04108be..cc0f5f4 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -75,22 +75,22 @@ LIST_8xx="	\
 #########################################################################
 
 LIST_4xx="	\
-	ADCIOP		alpr		AP1000		AR405		\
-	ASH405		bamboo		bubinga		CANBT		\
-	CMS700		CPCI2DP		CPCI405		CPCI4052	\
-	CPCI405AB	CPCI405DT	CPCI440		CPCIISER4	\
-	CRAYL1		csb272		csb472		DASA_SIM	\
-	DP405		DU405		ebony		ERIC		\
-	EXBITGEN	G2000		HH405		HUB405		\
-	JSE		KAREF		katmai		luan		\
-	METROBOX	MIP405		MIP405T		ML2		\
-	ml300		ocotea		OCRTC		ORSG		\
-	p3p440		PCI405		pcs440ep	PIP405		\
-	PLU405		PMC405		PPChameleonEVB	sbc405		\
-	sc3		sequoia		sequoia_nand	taishan		\
-	VOH405		VOM405		W7OLMC		W7OLMG		\
-	walnut		WUH405		XPEDITE1K	yellowstone	\
-	yosemite	yucca						\
+	acadia		ADCIOP		alpr		AP1000		\
+	AR405		ASH405		bamboo		bubinga		\
+	CANBT		CMS700		CPCI2DP		CPCI405		\
+	CPCI4052	CPCI405AB	CPCI405DT	CPCI440		\
+	CPCIISER4	CRAYL1		csb272		csb472		\
+	DASA_SIM	DP405		DU405		ebony		\
+	ERIC		EXBITGEN	G2000		HH405		\
+	HUB405		JSE		KAREF		katmai		\
+	luan		METROBOX	MIP405		MIP405T		\
+	ML2		ml300		ocotea		OCRTC		\
+	ORSG		p3p440		PCI405		pcs440ep	\
+	PIP405		PLU405		PMC405		PPChameleonEVB	\
+	sbc405		sc3		sequoia		sequoia_nand	\
+	taishan		VOH405		VOM405		W7OLMC		\
+	W7OLMG		walnut		WUH405		XPEDITE1K	\
+	yellowstone	yosemite	yucca				\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 29180f3..d4aecb3 100644
--- a/Makefile
+++ b/Makefile
@@ -998,6 +998,9 @@ wtk_config:	unconfig
 #########################################################################
 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
 
+acadia_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
+
 ADCIOP_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
 
diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile
new file mode 100644
index 0000000..183f694
--- /dev/null
+++ b/board/amcc/acadia/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o cpr.o memory.o
+SOBJS	=
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
new file mode 100644
index 0000000..c8aaad2
--- /dev/null
+++ b/board/amcc/acadia/acadia.c
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+extern void board_pll_init_f(void);
+
+/* Some specific Acadia Defines */
+#define CPLD_BASE	0x80000000
+
+void liveoak_gpio_init(void)
+{
+	/*
+	 * GPIO0 setup (select GPIO or alternate function)
+	 */
+       	out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
+       	out32(GPIO0_OSRH, CFG_GPIO0_OSRH);	/* output select */
+       	out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
+       	out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H);	/* input select */
+       	out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
+       	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);	/* three-state select */
+       	out32(GPIO0_TCR, CFG_GPIO0_TCR);  /* enable output driver for outputs */
+
+	/*
+	 * Ultra (405EZ) was nice enough to add another GPIO controller
+	 */
+	out32(GPIO1_OSRH, CFG_GPIO1_OSRH);	/* output select */
+	out32(GPIO1_OSRL, CFG_GPIO1_OSRL);
+	out32(GPIO1_ISR1H, CFG_GPIO1_ISR1H);	/* input select */
+	out32(GPIO1_ISR1L, CFG_GPIO1_ISR1L);
+	out32(GPIO1_TSRH, CFG_GPIO1_TSRH);	/* three-state select */
+	out32(GPIO1_TSRL, CFG_GPIO1_TSRL);
+	out32(GPIO1_TCR, CFG_GPIO1_TCR);  /* enable output driver for outputs */
+}
+
+#if 0 /* test-only: not called at all??? */
+void ext_bus_cntlr_init(void)
+{
+#if (defined(EBC_PB4AP) && defined(EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4))
+       	mtebc(pb4ap, EBC_PB4AP);
+       	mtebc(pb4cr, EBC_PB4CR);
+#endif
+}
+#endif
+
+int board_early_init_f(void)
+{
+	unsigned int reg;
+
+#if 0 /* test-only */
+	/*
+	 * If CRAM memory and SPI/NAND boot, and if the CRAM memory is
+	 * already initialized by the pre-loader then we can't reinitialize
+	 * CPR registers, GPIO registers and EBC registers as this will
+	 * have the effect of un-initializing CRAM.
+	 */
+	spr_reg = (volatile unsigned long) mfspr(SPRG7);
+	if (spr_reg != LOAK_CRAM) { /* != CRAM */
+		board_pll_init_f();
+		liveoak_gpio_init();
+		ext_bus_cntlr_init();
+
+		mtebc(pb1ap, CFG_EBC_PB1AP);
+		mtebc(pb1cr, CFG_EBC_PB1CR);
+
+		mtebc(pb2ap, CFG_EBC_PB2AP);
+		mtebc(pb2cr, CFG_EBC_PB2CR);
+	}
+#else
+	board_pll_init_f();
+	liveoak_gpio_init();
+/*	ext_bus_cntlr_init(); */
+#endif
+
+#if 0 /* test-only (orig) */
+	/*
+	 * If we boot from NAND Flash, we are running in
+	 * RAM, so disable the EBC_CS0 so that it goes back
+	 * to the NOR Flash.  It will be enabled later
+	 * for the NAND Flash on EBC_CS1
+	 */
+	mfsdr(sdrultra0, reg);
+	mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0);
+#endif
+#if 0 /* test-only */
+	/* configure for NAND */
+	mfsdr(sdrultra0, reg);
+	reg &= ~SDR_ULTRA0_CSN_MASK;
+	reg |= SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS;
+	mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0);
+#endif
+
+	/* USB Host core needs this bit set */
+	mfsdr(sdrultra1, reg);
+	mtsdr(sdrultra1, reg | SDR_ULTRA1_LEDNENABLE);
+
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000010);
+	mtdcr(uicpr, 0xFE7FFFF0);	/* set int polarities */
+	mtdcr(uictr, 0x00000010);	/* set int trigger levels */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	return 0;
+}
+
+int misc_init_f(void)
+{
+	/* Set EPLD to take PHY out of reset */
+	out8(CPLD_BASE + 0x05, 0x00);
+	udelay(100000);
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: Acadia - AMCC PPC405EZ Evaluation Board");
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk
new file mode 100644
index 0000000..79b948e
--- /dev/null
+++ b/board/amcc/acadia/config.mk
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(TOPDIR)/board/amcc/liveoak/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFC0000
+endif
+
+ifeq ($(CONFIG_NAND_U_BOOT),y)
+LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
+endif
+
+ifeq ($(CONFIG_SPI_U_BOOT),y)
+LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-spi.lds
+PAD_TO = 0x00840000 
+endif
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/board/amcc/acadia/cpr.c b/board/amcc/acadia/cpr.c
new file mode 100644
index 0000000..10d8290
--- /dev/null
+++ b/board/amcc/acadia/cpr.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <ppc405.h>
+
+/* test-only: move into cpu directory!!! */
+
+#if defined(PLLMR0_200_133_66)
+void board_pll_init_f(void)
+{
+	/*
+	 * set PLL clocks based on input sysclk is 33M
+	 *
+	 * ----------------------------------
+	 * | CLK   | FREQ (MHz) | DIV RATIO |
+	 * ----------------------------------
+	 * | CPU   |  200.0     |   4 (0x02)|
+	 * | PLB   |  133.3     |   6 (0x06)|
+	 * | OPB   |   66.6     |  12 (0x0C)|
+	 * | EBC   |   66.6     |  12 (0x0C)|
+	 * | SPI   |   66.6     |  12 (0x0C)|
+	 * | UART0 |   10.0     |  40 (0x28)|
+	 * | UART1 |   10.0     |  40 (0x28)|
+	 * | DAC   |    2.0     | 200 (0xC8)|
+	 * | ADC   |    2.0     | 200 (0xC8)|
+	 * | PWM   |  100.0     |   4 (0x04)|
+	 * | EMAC  |   25.0     |  16 (0x10)|
+	 * -----------------------------------
+	 */
+
+	/* Initialize PLL */
+	mtcpr(cprpllc, 0x0000033c);
+	mtcpr(cprplld, 0x0c010200);
+	mtcpr(cprprimad, 0x04060c0c);
+	mtcpr(cprperd0, 0x000c0000);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(cprclkupd, 0x40000000);
+}
+
+#elif defined(PLLMR0_266_160_80)
+
+void board_pll_init_f(void)
+{
+	/*
+	 * set PLL clocks based on input sysclk is 33M
+	 *
+	 * ----------------------------------
+	 * | CLK   | FREQ (MHz) | DIV RATIO |
+	 * ----------------------------------
+	 * | CPU   |  266.64    |   3       |
+	 * | PLB   |  159.98    |   5 (0x05)|
+	 * | OPB   |   79.99    |  10 (0x0A)|
+	 * | EBC   |   79.99    |  10 (0x0A)|
+	 * | SPI   |   79.99    |  10 (0x0A)|
+	 * | UART0 |   28.57    |   7 (0x07)|
+	 * | UART1 |   28.57    |   7 (0x07)|
+	 * | DAC   |   28.57    |   7 (0xA7)|
+	 * | ADC   |    4     	|  50 (0x32)|
+	 * | PWM   |   28.57    |   7 (0x07)|
+	 * | EMAC  |    4       |  50 (0x32)|
+	 * -----------------------------------
+	 */
+
+	/* Initialize PLL */
+	mtcpr(cprpllc,   0x20000238);
+	mtcpr(cprplld,   0x03010400);
+	mtcpr(cprprimad, 0x03050a0a);
+	mtcpr(cprperc0,  0x00000000);
+	mtcpr(cprperd0,  0x070a0707);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(cprperd1,  0x07323200);
+	mtcpr(cprclkupd, 0x40000000);
+}
+
+#elif defined(PLLMR0_333_166_83)
+
+void board_pll_init_f(void)
+{
+	/*
+	 * set PLL clocks based on input sysclk is 33M
+	 *
+	 * ----------------------------------
+	 * | CLK   | FREQ (MHz) | DIV RATIO |
+	 * ----------------------------------
+	 * | CPU   |  333.33    |   2       |
+	 * | PLB   |  166.66    |   4 (0x04)|
+	 * | OPB   |   83.33    |   8 (0x08)|
+	 * | EBC   |   83.33    |   8 (0x08)|
+	 * | SPI   |   83.33    |   8 (0x08)|
+	 * | UART0 |   16.66    |   5 (0x05)|
+	 * | UART1 |   16.66    |   5 (0x05)|
+	 * | DAC   |   ????     | 166 (0xA6)|
+	 * | ADC   |   ????     | 166 (0xA6)|
+	 * | PWM   |   41.66    |   3 (0x03)|
+	 * | EMAC  |   ????     |   3 (0x03)|
+	 * -----------------------------------
+	 */
+
+	/* Initialize PLL */
+	mtcpr(cprpllc,   0x0000033C);
+	mtcpr(cprplld,   0x0a010000);
+	mtcpr(cprprimad, 0x02040808);
+	mtcpr(cprperd0,  0x02080505);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(cprperd1,  0xA6A60300);
+	mtcpr(cprclkupd, 0x40000000);
+}
+
+#elif defined(PLLMR0_100_100_12)
+
+void board_pll_init_f(void)
+{
+	/*
+	 * set PLL clocks based on input sysclk is 33M
+	 *
+	 * ----------------------
+	 * | CLK   | FREQ (MHz) |
+	 * ----------------------
+	 * | CPU   |  100.00    |
+	 * | PLB   |  100.00    |
+	 * | OPB   |   12.00    |
+	 * | EBC   |   49.00    |
+	 * ----------------------
+	 */
+
+	/* Initialize PLL */
+	mtcpr(cprpllc,   0x000003BC);
+	mtcpr(cprplld,   0x06060600);
+	mtcpr(cprprimad, 0x02020004);
+	mtcpr(cprperd0,  0x04002828);	/* SPI clk div. eq. OPB clk div. */
+	mtcpr(cprperd1,  0xC8C81600);
+	mtcpr(cprclkupd, 0x40000000);
+}
+#endif /* CPU_<speed>_405EZ */
+
+#if defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL)
+/*
+ * Get timebase clock frequency
+ */
+unsigned long get_tbclk (void)
+{
+	unsigned long cpr_plld;
+	unsigned long cpr_primad;
+	unsigned long primad_cpudv;
+	unsigned long pllFbkDiv;
+	unsigned long freqProcessor;
+
+	/*
+	 * Read PLL Mode registers
+	 */
+	mfcpr(cprplld, cpr_plld);
+
+	/*
+	 * Read CPR_PRIMAD register
+	 */
+	mfcpr(cprprimad, cpr_primad);
+
+	/*
+	 * Determine CPU clock frequency
+	 */
+	primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
+	if (primad_cpudv == 0)
+		primad_cpudv = 16;
+
+	/*
+	 * Determine FBK_DIV.
+	 */
+        pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+        if (pllFbkDiv == 0)
+                pllFbkDiv = 256;
+
+	freqProcessor = (CONFIG_SYS_CLK_FREQ * pllFbkDiv) / primad_cpudv;
+
+	return (freqProcessor);
+}
+#endif	/* defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) */
diff --git a/board/amcc/acadia/flash.c b/board/amcc/acadia/flash.c
new file mode 100644
index 0000000..39a11f9
--- /dev/null
+++ b/board/amcc/acadia/flash.c
@@ -0,0 +1,1108 @@
+/*
+ * (C) Copyright 2004-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+
+/*
+ * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
+ */
+static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
+	{0xffc00001}, /* 0:boot from big flash */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word_1(flash_info_t * info, ulong dest, ulong data);
+static int write_word_2(flash_info_t * info, ulong dest, ulong data);
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last);
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info);
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info);
+#endif
+
+void flash_print_info(flash_info_t * info)
+{
+	int i;
+	int k;
+	int size;
+	int erased;
+	volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:
+		printf("AMD ");
+		break;
+	case FLASH_MAN_STM:
+		printf("STM ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf("FUJITSU ");
+		break;
+	case FLASH_MAN_SST:
+		printf("SST ");
+		break;
+	case FLASH_MAN_MX:
+		printf("MIXC ");
+		break;
+	default:
+		printf("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM040:
+		printf("AM29F040 (512 Kbit, uniform sector size)\n");
+		break;
+	case FLASH_AM400B:
+		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM400T:
+		printf("AM29LV400T (4 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM800B:
+		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM800T:
+		printf("AM29LV800T (8 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AMD016:
+		printf("AM29F016D (16 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_AM160B:
+		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM160T:
+		printf("AM29LV160T (16 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM320B:
+		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM320T:
+		printf("AM29LV320T (32 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM033C:
+		printf("AM29LV033C (32 Mbit, top boot sector)\n");
+		break;
+	case FLASH_SST800A:
+		printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_SST160A:
+		printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_STMW320DT:
+		printf ("M29W320DT (32 M, top sector)\n");
+		break;
+	case FLASH_MXLV320T:
+		printf ("MXLV320T (32 Mbit, top sector)\n");
+		break;
+	default:
+		printf("Unknown Chip Type\n");
+		break;
+	}
+
+	printf("  Size: %ld KB in %d Sectors\n",
+	       info->size >> 10, info->sector_count);
+
+	printf("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		/*
+		 * Check if whole sector is erased
+		 */
+		if (i != (info->sector_count - 1))
+			size = info->start[i + 1] - info->start[i];
+		else
+			size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned long *)info->start[i];
+		size = size >> 2;	/* divide by 4 for longword access */
+		for (k = 0; k < size; k++) {
+			if (*flash++ != 0xffffffff) {
+				erased = 0;
+				break;
+			}
+		}
+
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s%s",
+		       info->start[i],
+		       erased ? " E" : "  ", info->protect[i] ? "RO " : "   ");
+	}
+	printf("\n");
+	return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+	/* bit 0 used for big flash marking */
+	if ((ulong)addr & 0x1) {
+		return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info);
+	} else {
+		return flash_get_size_1(addr, info);
+	}
+}
+
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info)
+#else
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+#endif
+{
+	short i;
+	CFG_FLASH_WORD_SIZE value;
+	ulong base = (ulong) addr;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+	/* Write auto select command: read Manufacturer ID */
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	udelay(1000);
+
+	value = addr2[0];
+	DEBUGF("FLASH MANUFACT: %x\n", value);
+
+	switch (value) {
+	case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+		info->flash_id = FLASH_MAN_STM;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);	/* no or unknown flash  */
+	}
+
+	value = addr2[1];	/* device ID            */
+	DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+	switch (value) {
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000;	/* => 512 ko */
+		break;
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000;	/* => 512 ko */
+		break;
+
+	case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000;	/* => 512 ko */
+		break;
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+		info->flash_id += FLASH_AMD016;
+		info->sector_count = 32;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+		info->flash_id += FLASH_AMDLV033C;
+		info->sector_count = 64;
+		info->size = 0x00400000;
+		break;		/* => 4 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;		/* => 0.5 MB            */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;		/* => 0.5 MB            */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;		/* => 1 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;		/* => 1 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);	/* => no or unknown flash */
+	}
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type        */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+				    base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type           */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+		/* For AMD29033C flash we need to resend the command of *
+		 * reading flash protection for upper 8 Mb of flash     */
+		if (i == 32) {
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+		}
+
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+			info->protect[i] = 0;
+		else
+			info->protect[i] = addr2[2] & 1;
+	}
+
+	/* issue bank reset to return to read mode */
+	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+	return (info->size);
+}
+
+static int wait_for_DQ7_1(flash_info_t * info, int sect)
+{
+	ulong start, now, last;
+	volatile CFG_FLASH_WORD_SIZE *addr =
+	    (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+	start = get_timer(0);
+	last = start;
+	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+	       (CFG_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf("Timeout\n");
+			return -1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc('.');
+			last = now;
+		}
+	}
+	return 0;
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
+		return flash_erase_2(info, s_first, s_last);
+	} else {
+		return flash_erase_1(info, s_first, s_last);
+	}
+}
+
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
+#else
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+#endif
+{
+	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf("- missing\n");
+		} else {
+			printf("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	} else {
+		printf("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				for (i = 0; i < 50; i++)
+					udelay(1000);	/* wait 1 ms */
+			} else {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+			}
+			l_sect = sect;
+			/*
+			 * Wait for each sector to complete, it's more
+			 * reliable.  According to AMD Spec, you must
+			 * issue all erase commands within a specified
+			 * timeout.  This has been seen to fail, especially
+			 * if printf()s are included (for debug)!!
+			 */
+			wait_for_DQ7_1(info, sect);
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay(1000);
+
+	/* reset to read mode */
+	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+
+	printf(" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i = 0; i < 4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < 4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+{
+	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
+		return write_word_2(info, dest, data);
+	} else {
+		return write_word_1(info, dest, data);
+	}
+}
+
+static int write_word_1(flash_info_t * info, ulong dest, ulong data)
+#else
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+#endif
+{
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data) {
+		return (2);
+	}
+
+	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		/* data polling for D7 */
+		start = get_timer(0);
+		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+				return (1);
+			}
+		}
+	}
+
+	return (0);
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+
+#undef  CFG_FLASH_WORD_SIZE
+#define CFG_FLASH_WORD_SIZE unsigned short
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
+{
+	short i;
+	int n;
+	CFG_FLASH_WORD_SIZE value;
+	ulong base = (ulong) addr;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+	/* issue bank reset to return to read mode */
+	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+	/* Write auto select command: read Manufacturer ID */
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	udelay(1000);
+
+	value = addr2[0];
+	DEBUGF("FLASH MANUFACT: %x\n", value);
+
+#if 0 /* TODO: remove ifdef when Flash responds correctly */
+	switch (value) {
+	case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+		info->flash_id = FLASH_MAN_STM;
+		break;
+	case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+		info->flash_id = FLASH_MAN_MX;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);	/* no or unknown flash  */
+	}
+#endif /* TODO: remove ifdef when Flash responds correctly */
+
+	/*
+	 * TODO: Start
+	 * 	 uncomment block above when Flash responds correctly.
+	 *	 also remove the lines below:
+	 */
+	info->flash_id = FLASH_MAN_AMD;
+	DEBUGF("FLASH MANUFACT: FLASH_MAN_AMD\n");
+	/* TODO: End */
+
+	value = addr2[1];	/* device ID            */
+
+	DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+#if 0 /* TODO: remove ifdef when Flash responds correctly */
+	switch (value) {
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
+		info->flash_id += FLASH_STMW320DT;
+		info->sector_count = 67;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+		info->flash_id += FLASH_MXLV320T;
+		info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);	/* => no or unknown flash */
+	}
+#endif /* TODO: remove ifdef when Flash responds correctly */
+
+	/* 
+	 * TODO: Start
+	 * 	 uncomment block above when Flash responds correctly.
+	 *	 also remove the lines below:
+	 */
+	DEBUGF("\nFLASH DEVICEID: FLASH_AM320T\n");
+	info->flash_id += FLASH_AM320T;
+	info->sector_count = 71;
+	info->size = 0x00400000;  /* => 4 MB	*/
+	/* TODO: End */
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
+		/* set sector offsets for top boot block type		*/
+		base += info->size;
+		i = info->sector_count;
+		/*  1 x 16k boot sector */
+		base -= 16 << 10;
+		--i;
+		info->start[i] = base;
+		/*  2 x 8k  boot sectors */
+		for (n=0; n<2; ++n) {
+			base -= 8 << 10;
+			--i;
+			info->start[i] = base;
+		}
+		/*  1 x 32k boot sector */
+		base -= 32 << 10;
+		--i;
+		info->start[i] = base;
+
+		while (i > 0) {			/* 64k regular sectors	*/
+			base -= 64 << 10;
+			--i;
+			info->start[i] = base;
+		}
+	} else if ( ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) ||
+		    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ) {
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00002000;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		info->start[i--] = base + info->size - 0x0000a000;
+		info->start[i--] = base + info->size - 0x0000c000;
+		info->start[i--] = base + info->size - 0x0000e000;
+		info->start[i--] = base + info->size - 0x00010000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00010000;
+		}
+	}
+	else {
+		if (info->flash_id & FLASH_BTYPE){
+			/* set sector offsets for bottom boot block type */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+				    base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address,(A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+		/* For AMD29033C flash we need to resend the command of *
+		 * reading flash protection for upper 8 Mb of flash     */
+		if (i == 32) {
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+		}
+
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+			info->protect[i] = 0;
+		else
+			info->protect[i] = addr2[2] & 1;
+	}
+
+	/* issue bank reset to return to read mode */
+	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+	return (info->size);
+}
+
+/*
+ * TODO: FIX: this wait loop sometimes fails: DQ7 indicates the erase command
+ *		never was accepted (i.e. didn't start) - why????
+ */
+static int wait_for_DQ7_2(flash_info_t * info, int sect)
+{
+	ulong start, now, last, counter = 0;
+	volatile CFG_FLASH_WORD_SIZE *addr =
+	    (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+	start = get_timer(0);
+	DEBUGF("DQ7_2: start = 0x%08lx\n", start);
+	last = start;
+	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+	       (CFG_FLASH_WORD_SIZE) 0x00800080) {
+		DEBUGF("DQ7_2: start = 0x%08lx, now = 0x%08lx\n", start, now);	
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf("Timeout\n");
+			return -1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc('.');
+			last = now;
+		}
+		udelay(1000000); /* 1 sec */
+		putc('.');
+		counter++;
+		if (counter > 5)  {
+			return -1;
+		}
+		DEBUGF("DQ7_2: now = 0x%08lx, last = 0x%08lx\n", now, last);
+	}
+	return 0;
+}
+
+static void wr_flash_cmd(ulong sector, ushort addr, CFG_FLASH_WORD_SIZE value)
+{
+	int fw_size;
+	
+	fw_size = sizeof(value);
+	switch (fw_size)
+	{
+	case 1:
+		out8((ulong)(sector + addr), value);
+		break;
+	case 2:
+		out16((ulong)(sector + (addr << 1)), value);
+		break;
+	default:
+		printf("flash_erase: error incorrect chip programing size.\n");
+	}
+	return;
+}
+
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
+{
+	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect, count = 0;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf("- missing\n");
+		} else {
+			printf("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	} else {
+		printf("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first, count = 0; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				for (i = 0; i < 50; i++)
+					udelay(1000);	/* wait 1 ms */
+			} else {
+				/*
+				 * TODO: fix code
+				 */
+				wr_flash_cmd((ulong)addr, 0, (CFG_FLASH_WORD_SIZE) 0x00F000F0);
+				wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00AA00AA);
+				wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR1, (CFG_FLASH_WORD_SIZE) 0x00550055);
+				wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00800080);
+				wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00AA00AA);
+				wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR1, (CFG_FLASH_WORD_SIZE) 0x00550055);
+				wr_flash_cmd((ulong)addr2, 0, (CFG_FLASH_WORD_SIZE) 0x00300030);
+				udelay(2000000);	/* 2 sec */
+				wr_flash_cmd((ulong)addr, 0, (CFG_FLASH_WORD_SIZE) 0x00F000F0);
+
+#if 0
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+#endif
+			}
+			l_sect = sect;
+			printf("..");
+			printf("..");
+			/*
+			 * Wait for each sector to complete, it's more
+			 * reliable.  According to AMD Spec, you must
+			 * issue all erase commands within a specified
+			 * timeout.  This has been seen to fail, especially
+			 * if printf()s are included (for debug)!!
+			 */
+			wait_for_DQ7_2(info, sect);
+			count++;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay(1000);
+
+	/* reset to read mode */
+	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+
+	printf(" done\n");
+	
+	if (count > 0) {	
+		return 0;
+	} else {
+		return 1;
+	}
+}
+
+static int write_word_2(flash_info_t * info, ulong dest, ulong data)
+{
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data) {
+		return (2);
+	}
+
+	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		/* data polling for D7 */
+		start = get_timer(0);
+		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+				return (1);
+			}
+		}
+	}
+
+	return (0);
+}
+#endif /* CFG_FLASH_2ND_16BIT_DEV */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+	unsigned long total_b = 0;
+	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned short index = 0;
+	int i;
+
+	index = 0;
+
+	DEBUGF("\n");
+	DEBUGF("FLASH: Index: %d\n", index);
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		flash_info[i].sector_count = -1;
+		flash_info[i].size = 0;
+
+		/* check whether the address is 0 */
+		if (flash_addr_table[index][i] == 0) {
+			continue;
+		}
+
+		/* call flash_get_size() to initialize sector address */
+		size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i],
+				   &flash_info[i]);
+		flash_info[i].size = size_b[i];
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+			       i, size_b[i], size_b[i] << 20);
+			flash_info[i].sector_count = -1;
+			flash_info[i].size = 0;
+		}
+
+		/* Monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    &flash_info[i]);
+#if defined(CFG_ENV_IS_IN_FLASH)
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[i]);
+#if defined(CFG_ENV_IS_IN_FLASH) && defined(CFG_ENV_ADDR_REDUND)
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[i]);
+#endif
+#endif
+
+		total_b += flash_info[i].size;
+	}
+
+	return total_b;
+}
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
new file mode 100644
index 0000000..0f1de71
--- /dev/null
+++ b/board/amcc/acadia/memory.c
@@ -0,0 +1,564 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#define CRAM_BANK0_BASE 		0x0
+#define CRAM_DIDR			0x00100000
+#define	MICRON_MT45W8MW16BGX_CRAM_ID	0x1b431b43
+#define	MICRON_MT45W8MW16BGX_CRAM_ID2	0x13431343
+#define	MICRON_DIDR_VENDOR_ID		0x00030003	/* 00011b */
+#define	CRAM_DIDR_VENDOR_ID_MASK	0x001f001f	/* DIDR[4:0] */
+#define	CRAM_DEVID_NOT_SUPPORTED	0x00000000
+
+#define PSRAM_PASS	0x50415353	/* "PASS" */
+#define PSRAM_FAIL	0x4641494C	/* "FAIL" */
+
+static u32 is_cram_inited(void);
+static u32 is_cram(void);
+static long int cram_init(u32);
+static void cram_bcr_write(u32);
+void udelay (unsigned long);
+
+void sdram_init(void)
+{
+	volatile unsigned long spr_reg;
+
+	/*
+	 * If CRAM not initialized or CRAM looks initialized because this
+	 * is after a warm reboot then set SPRG7 to indicate CRAM needs
+	 * initialization.  Note that CRAM is initialized by the SPI and
+	 * NAND preloader.
+	 */
+	spr_reg = (volatile unsigned long) mfspr(SPRG6);
+	if ((is_cram_inited() != 1) || (spr_reg != LOAK_SPL)) {
+		mtspr(SPRG7, LOAK_NONE);	/* "NONE" */
+	}
+
+#if 1
+	/*
+	 * When running the NAND SPL, the normal EBC configuration is not
+	 * done, so We need to enable EPLD access on EBC_CS_2 and the memory
+	 * on EBC_CS_3
+	 */
+
+	/* Enable CPLD - Needed for PSRAM Access */
+
+
+	/* Init SDRAM by setting EBC Bank 3 for PSRAM */
+	mtebc(pb1ap, CFG_EBC_PB1AP);
+	mtebc(pb1cr, CFG_EBC_PB1CR);
+
+	mtebc(pb2ap, CFG_EBC_PB2AP);
+	mtebc(pb2cr, CFG_EBC_PB2CR);
+
+	/* pre-boot loader code: we are in OCM */
+	mtspr(SPRG6, LOAK_SPL);	/* "SPL " */
+	mtspr(SPRG7, LOAK_OCM);	/* "OCM " */
+#endif
+
+	return;
+}
+
+static void cram_bcr_write(u32 wr_val)
+{
+	u32 tmp_reg;
+	u32 val;
+	volatile u32 gpio_reg;
+
+	/* # Program CRAM write */
+
+	/*
+	 * set CRAM_CRE = 0x1
+	 * set wr_val = wr_val << 2
+	 */
+	gpio_reg = in32(GPIO1_OR);
+	out32(GPIO1_OR,  gpio_reg | 0x00000400);
+	wr_val = wr_val << 2;
+	/* wr_val = 0x1c048; */
+
+
+	/*
+	 * # stop PLL clock before programming CRAM
+	 * set EPLD0_MUX_CTL.OESPR3 = 1
+	 * delay 2
+	 */
+
+
+	/*
+	 * # CS1
+	 * read 0x00200000
+	 * #shift 2 bit left before write
+	 * set val = wr_val + 0x00200000
+	 * write dmem val 0
+	 * read 0x00200000 val
+	 * print val/8x
+	 */
+	tmp_reg = in32(0x00200000);
+	val = wr_val + 0x00200000;
+	/* val = 0x0021c048; */
+	out32(val, 0x0000);
+	udelay(100000);
+	val = in32(0x00200000);
+
+	debug("CRAM VAL: %x for CS1 ", val);
+
+	/*
+	 * # CS2
+	 * read 0x02200000
+	 * #shift 2 bit left before write
+	 * set val = wr_val + 0x02200000
+	 * write dmem val 0
+	 * read 0x02200000 val
+	 * print val/8x
+	 */
+	tmp_reg = in32(0x02200000);
+	val = wr_val + 0x02200000;
+	/* val = 0x0221c048; */
+	out32(val, 0x0000);
+	udelay(100000);
+	val = in32(0x02200000);
+
+	debug("CRAM VAL: %x for CS2 ", val);
+
+	/*
+	 * # Start PLL clock before programming CRAM
+	 * set EPLD0_MUX_CTL.OESPR3 = 0
+	 */
+
+
+	/*
+	 * set CRAMCR = 0x1
+	 */
+	gpio_reg = in32(GPIO1_OR);
+	out32(GPIO1_OR,  gpio_reg | 0x00000400);
+
+	/*
+	 * # read CRAM config BCR ( bit19:18 = 10b )
+	 * #read 0x00200000
+	 * # 1001_1001_0001_1111 ( 991f ) =>
+	 * #10_0110_0100_0111_1100  =>   2647c => 0022647c
+	 * #0011_0010_0011_1110 (323e)
+	 * #
+	 */
+
+	/*
+	 * set EPLD0_MUX_CTL.CRAMCR = 0x0
+	 */
+	gpio_reg = in32(GPIO1_OR);
+	out32(GPIO1_OR,  gpio_reg & 0xFFFFFBFF);
+	return;
+}
+
+static u32 is_cram_inited()
+{
+	volatile unsigned long spr_reg;
+
+	/*
+ 	 * If CRAM is initialized already, then don't reinitialize it again.
+	 * In the case of NAND boot and SPI boot, CRAM will already be
+	 * initialized by the pre-loader
+	 */
+	spr_reg = (volatile unsigned long) mfspr(SPRG7);
+	if (spr_reg == LOAK_CRAM) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/******
+ * return 0 if not CRAM
+ * return 1 if CRAM and it's already inited by preloader
+ * else return cram_id (CRAM Device Identification Register)
+ ******/
+static u32 is_cram(void)
+{
+	u32 gpio_TCR, gpio_OSRL, gpio_OR, gpio_ISR1L;
+	volatile u32 gpio_reg;
+	volatile u32 cram_id = 0;
+
+	if (is_cram_inited() == 1) {
+		/* this is CRAM and it is already inited (by preloader) */
+		cram_id = 1;
+	} else {
+		/*
+		 * # CRAM CLOCK
+		 * set GPIO0_TCR.G8 = 1
+		 * set GPIO0_OSRL.G8 = 0
+		 * set GPIO0_OR.G8 = 0
+		 */
+		gpio_reg = in32(GPIO0_TCR);
+		gpio_TCR = gpio_reg;
+		out32(GPIO0_TCR, gpio_reg | 0x00800000);
+		gpio_reg = in32(GPIO0_OSRL);
+		gpio_OSRL = gpio_reg;
+		out32(GPIO0_OSRL, gpio_reg & 0xffffbfff);
+		gpio_reg = in32(GPIO0_OR);
+		gpio_OR = gpio_reg;
+		out32(GPIO0_OR, gpio_reg & 0xff7fffff);
+
+		/*
+		 * # CRAM Addreaa Valid
+		 * set GPIO0_TCR.G10 = 1
+		 * set GPIO0_OSRL.G10 = 0
+		 * set GPIO0_OR.G10 = 0
+		 */
+		gpio_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, gpio_reg | 0x00200000);
+		gpio_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, gpio_reg & 0xfffffbff);
+		gpio_reg = in32(GPIO0_OR);
+		out32(GPIO0_OR, gpio_reg & 0xffdfffff);
+
+		/*
+		 * # config input (EBC_WAIT)
+		 * set GPIO0_ISR1L.G9 = 1
+		 * set GPIO0_TCR.G9 = 0
+		 */
+		gpio_reg = in32(GPIO0_ISR1L);
+		gpio_ISR1L = gpio_reg;
+		out32(GPIO0_ISR1L, gpio_reg | 0x00001000);
+		gpio_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, gpio_reg & 0xffbfffff);
+
+		/*
+		 * Enable CRE to read Registers
+		 * set GPIO0_TCR.21 = 1
+		 * set GPIO1_OR.21 = 1
+		 */
+		gpio_reg = in32(GPIO1_TCR);
+		out32(GPIO1_TCR, gpio_reg | 0x00000400);
+
+		gpio_reg = in32(GPIO1_OR);
+		out32(GPIO1_OR,  gpio_reg | 0x00000400);
+
+
+
+
+		/* Read Version ID */
+		cram_id = (volatile u32) in32(CRAM_BANK0_BASE+CRAM_DIDR);
+		udelay(100000);
+
+		asm volatile("	sync");
+		asm volatile("	eieio");
+
+		debug("Cram ID: %X ", cram_id);
+
+		switch (cram_id) {
+		case MICRON_MT45W8MW16BGX_CRAM_ID:
+		case MICRON_MT45W8MW16BGX_CRAM_ID2:
+			/* supported CRAM vendor/part */
+			break;
+		case CRAM_DEVID_NOT_SUPPORTED:
+		default:
+			/* check for DIDR Vendor ID of Micron */
+			if ((cram_id & CRAM_DIDR_VENDOR_ID_MASK) ==
+						MICRON_DIDR_VENDOR_ID)
+			{
+				/* supported CRAM vendor */
+				break;
+			}
+			/* this is not CRAM or not supported CRAM vendor/part */
+			cram_id = 0;
+			/*
+			 * reset the GPIO registers to the values that were
+			 * there before this routine
+			 */
+			out32(GPIO0_TCR, gpio_TCR);
+			out32(GPIO0_OSRL, gpio_OSRL);
+			out32(GPIO0_OR, gpio_OR);
+			out32(GPIO0_ISR1L, gpio_ISR1L);
+			break;
+		}
+	}
+
+	return cram_id;
+}
+
+static long int cram_init(u32 already_inited)
+{
+	volatile u32 tmp_reg;
+	u32 cram_wr_val;
+
+	if (already_inited == 0) return 0;
+
+	/*
+	 * If CRAM is initialized already, then don't reinitialize it again.
+	 * In the case of NAND boot and SPI boot, CRAM will already be
+	 * initialized by the pre-loader
+	 */
+	if (already_inited != 1)
+	{
+		/*
+		 * #o CRAM Card
+		 * #  - CRAMCRE @reg16 = 1; for CRAM to use
+		 * #  - CRAMCRE @reg16 = 0; for CRAM to program
+		 *
+		 * # enable CRAM SEL, move from setEPLD.cmd
+		 * set EPLD0_MUX_CTL.OECRAM = 0
+		 * set EPLD0_MUX_CTL.CRAMCR = 1
+		 * set EPLD0_ETHRSTBOOT.SLCRAM = 0
+		 * #end
+		 */
+
+
+		/*
+		 * #1. EBC need to program READY, CLK, ADV for ASync mode
+		 * # config output
+		 */
+
+		/*
+		 * # CRAM CLOCK
+		 * set GPIO0_TCR.G8 = 1
+		 * set GPIO0_OSRL.G8 = 0
+		 * set GPIO0_OR.G8 = 0
+		 */
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg | 0x00800000);
+		tmp_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, tmp_reg & 0xffffbfff);
+		tmp_reg = in32(GPIO0_OR);
+		out32(GPIO0_OR, tmp_reg & 0xff7fffff);
+
+		/*
+		 * # CRAM Addreaa Valid
+		 * set GPIO0_TCR.G10 = 1
+		 * set GPIO0_OSRL.G10 = 0
+		 * set GPIO0_OR.G10 = 0
+		 */
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg | 0x00200000);
+		tmp_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, tmp_reg & 0xfffffbff);
+		tmp_reg = in32(GPIO0_OR);
+		out32(GPIO0_OR, tmp_reg & 0xffdfffff);
+
+		/*
+		 * # config input (EBC_WAIT)
+		 * set GPIO0_ISR1L.G9 = 1
+		 * set GPIO0_TCR.G9 = 0
+		 */
+		tmp_reg = in32(GPIO0_ISR1L);
+		out32(GPIO0_ISR1L, tmp_reg | 0x00001000);
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg & 0xffbfffff);
+
+		/*
+		 * # config CS4 from GPIO
+		 * set GPIO0_TCR.G0 = 1
+		 * set GPIO0_OSRL.G0 = 1
+		 */
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg | 0x80000000);
+		tmp_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, tmp_reg | 0x40000000);
+
+		/*
+		 * #2. EBC in Async mode
+		 * # set EBC0_PB1AP = 0x078f0ec0
+		 * set EBC0_PB1AP = 0x078f1ec0
+		 * set EBC0_PB2AP = 0x078f1ec0
+		 */
+		mtebc(pb1ap, 0x078F1EC0);
+		mtebc(pb2ap, 0x078F1EC0);
+
+		/*
+		 * #set EBC0_PB1CR = 0x000bc000
+		 * #enable CS2 for CRAM
+		 * set EBC0_PB2CR = 0x020bc000
+		 */
+		mtebc(pb1cr, 0x000BC000);
+		mtebc(pb2cr, 0x020BC000);
+
+		/*
+		 * #3. set CRAM in Sync mode
+		 * #exec cm_bcr_write.cmd { 0x701f }
+		 * #3. set CRAM in Sync mode (full drv strength)
+		 * exec cm_bcr_write.cmd { 0x701F }
+		 */
+		cram_wr_val = 0x7012;	/* CRAM burst setting */
+		cram_bcr_write(cram_wr_val);
+
+		/*
+		 * #4. EBC in Sync mode
+		 * #set EBC0_PB1AP = 0x9f800fc0
+		 * #set EBC0_PB1AP = 0x900001c0
+		 * set EBC0_PB2AP = 0x9C0201c0
+		 * set EBC0_PB2AP = 0x9C0201c0
+		 */
+		mtebc(pb1ap, 0x9C0201C0);
+		mtebc(pb2ap, 0x9C0201C0);
+
+		/*
+		 * #5. EBC need to program READY, CLK, ADV for Sync mode
+		 * # config output
+		 * set GPIO0_TCR.G8 = 1
+		 * set GPIO0_OSRL.G8 = 1
+		 * set GPIO0_TCR.G10 = 1
+		 * set GPIO0_OSRL.G10 = 1
+		 */
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg | 0x00800000);
+		tmp_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, tmp_reg | 0x00004000);
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg | 0x00200000);
+		tmp_reg = in32(GPIO0_OSRL);
+		out32(GPIO0_OSRL, tmp_reg | 0x00000400);
+
+		/*
+		 * # config input
+		 * set GPIO0_ISR1L.G9 = 1
+		 * set GPIO0_TCR.G9 = 0
+		 */
+		tmp_reg = in32(GPIO0_ISR1L);
+		out32(GPIO0_ISR1L, tmp_reg | 0x00001000);
+		tmp_reg = in32(GPIO0_TCR);
+		out32(GPIO0_TCR, tmp_reg & 0xffbfffff);
+
+		/*
+		 * # config EBC to use RDY
+		 * set SDR0_ULTRA0.EBCREN = 1
+		 */
+		mfsdr(sdrultra0, tmp_reg);
+		mtsdr(sdrultra0, tmp_reg | 0x04000000);
+
+		/*
+		 * set EPLD0_MUX_CTL.OESPR3 = 0
+		 */
+
+
+		mtspr(SPRG7, LOAK_CRAM);	/* "CRAM" */
+	} /* if (already_inited != 1) */
+
+	return (64 * 1024 * 1024);
+}
+
+/******
+ * return 0 if not PSRAM
+ * return 1 if is PSRAM
+ ******/
+static int is_psram(u32 addr)
+{
+	u32 test_pattern = 0xdeadbeef;
+	volatile u32 readback;
+
+	if (addr == CFG_SDRAM_BASE) {
+		/* This is to temp enable OE for PSRAM */
+		out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f);
+		udelay(10000);
+	}
+
+	out32(addr, test_pattern);
+	asm volatile("	sync");
+	asm volatile("	eieio");
+
+	readback = (volatile u32) in32(addr);
+	asm volatile("	sync");
+	asm volatile("	eieio");
+	if (readback == test_pattern) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static long int psram_init(void)
+{
+	u32 readback;
+	long psramsize = 0;
+	int i;
+
+	/* This is to temp enable OE for PSRAM */
+	out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f);
+	udelay(10000);
+
+	/*
+	 * PSRAM bank 1: read then write to address 0x00000000
+	 */
+	for (i = 0; i < 100; i++) {
+		if (is_psram(CFG_SDRAM_BASE + (i*256)) == 1) {
+			readback = PSRAM_PASS;
+		} else {
+			readback = PSRAM_FAIL;
+			break;
+		}
+	}
+	if (readback == PSRAM_PASS) {
+		debug("psram_init(bank0): pass\n");
+		psramsize = (16 * 1024 * 1024);
+	} else {
+		debug("psram_init(bank0): fail\n");
+		return 0;
+	}
+
+#if 0
+	/*
+	 * PSRAM bank 1: read then write to address 0x01000000
+	 */
+	for (i = 0; i < 100; i++) {
+		if (is_psram((1 << 24) + (i*256)) == 1) {
+			readback = PSRAM_PASS;
+		} else {
+			readback = PSRAM_FAIL;
+			break;
+		}
+	}
+	if (readback == PSRAM_PASS) {
+		debug("psram_init(bank1): pass\n");
+		psramsize = psramsize + (16 * 1024 * 1024);
+	}
+#endif
+
+	mtspr(SPRG7, LOAK_PSRAM);	/* "PSRA" - PSRAM */
+
+	return psramsize;
+}
+
+long int initdram(int board_type)
+{
+	long int sram_size;
+	u32 cram_inited;
+
+	/* Determine Attached Memory Expansion Card*/
+	cram_inited = is_cram();
+	if (cram_inited != 0) {					/* CRAM */
+		debug("CRAM Expansion Card attached\n");
+		sram_size = cram_init(cram_inited);
+	} else if (is_psram(CFG_SDRAM_BASE+4) == 1) {		/* PSRAM */
+		debug("PSRAM Expansion Card attached\n");
+		sram_size = psram_init();
+	} else { 						/* no SRAM */
+		debug("No Memory Card Attached!!\n");
+		sram_size = 0;
+	}
+
+	return sram_size;
+}
+
+int testdram(void)
+{
+	return (0);
+}
diff --git a/board/amcc/acadia/u-boot.lds b/board/amcc/acadia/u-boot.lds
new file mode 100644
index 0000000..be03092
--- /dev/null
+++ b/board/amcc/acadia/u-boot.lds
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 4f55583..cf56581 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -1333,6 +1333,9 @@ int enetInt (struct eth_device *dev)
 			}
 		}
 		mtdcr (uicsr, MAL_UIC_DEF|EMAC_UIC_DEF|EMAC_UIC_DEF1);	/* Clear */
+#if defined(CONFIG_405EZ)
+		mtsdr (sdricintstat, SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT);
+#endif	/* defined(CONFIG_405EZ) */
 	}
 	while (serviced);
 
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index b02f6f4..2d8740c 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -47,6 +47,9 @@ void board_reset(void);
 
 #if defined(CONFIG_440)
 #define FREQ_EBC		(sys_info.freqEPB)
+#elif defined(CONFIG_405EZ)
+#define FREQ_EBC		((CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / \
+				 sys_info.pllExtBusDiv)
 #else
 #define FREQ_EBC		(sys_info.freqPLB / sys_info.pllExtBusDiv)
 #endif
@@ -209,7 +212,8 @@ int checkcpu (void)
 
 	puts("AMCC PowerPC 4");
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ)
 	puts("05");
 #endif
 #if defined(CONFIG_440)
@@ -257,6 +261,10 @@ int checkcpu (void)
 		puts("EP Rev. B");
 		break;
 
+	case PVR_405EZ_RA:
+		puts("EZ Rev. A");
+		break;
+
 #if defined(CONFIG_440)
 	case PVR_440GP_RB:
 		puts("GP Rev. B");
@@ -386,9 +394,9 @@ int checkcpu (void)
 	}
 
 	printf (" at %s MHz (PLB=%lu, OPB=%lu, EBC=%lu MHz)\n", strmhz(buf, clock),
-	       sys_info.freqPLB / 1000000,
-	       sys_info.freqPLB / sys_info.pllOpbDiv / 1000000,
-	       FREQ_EBC / 1000000);
+		sys_info.freqPLB / 1000000,
+		get_OPB_freq() / 1000000,
+		FREQ_EBC / 1000000);
 
 	if (addstr[0] != 0)
 		printf("       %s\n", addstr);
@@ -418,7 +426,7 @@ int checkcpu (void)
 	putc('\n');
 #endif
 
-#if defined(CONFIG_405EP)
+#if defined(CONFIG_405EP) || defined(CONFIG_405EZ)
 	printf ("       16 kB I-Cache 16 kB D-Cache");
 #elif defined(CONFIG_440)
 	printf ("       32 kB I-Cache 32 kB D-Cache");
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 82ae443..9d1cd13 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -256,7 +256,8 @@ cpu_init_f (void)
 	 */
 #if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
 #if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
-     defined(CONFIG_405EP) || defined(CONFIG_405))
+     defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+     defined(CONFIG_405))
 	/*
 	 * Move the next instructions into icache, since these modify the flash
 	 * we are running from!
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index fab0d95..e62dd9d 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -264,7 +264,8 @@ int serial_tstc ()
 #endif	/* CONFIG_IOP480 */
 
 /*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP) || \
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
     defined(CONFIG_440)
 
 #if defined(CONFIG_440)
@@ -309,7 +310,7 @@ int serial_tstc ()
 #define MFREG(a, d)	mfsdr(a, d)
 #define MTREG(a, d)	mtsdr(a, d)
 #endif /* #if defined(CONFIG_440GP) */
-#elif defined(CONFIG_405EP)
+#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
 #define UART0_BASE      0xef600300
 #define UART1_BASE      0xef600400
 #define UCR0_MASK       0x0000007f
@@ -392,47 +393,95 @@ volatile static serial_buffer_t buf_info;
 
 #if defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLOCK)
 static void serial_divs (int baudrate, unsigned long *pudiv,
-			 unsigned short *pbdiv )
+			 unsigned short *pbdiv)
 {
-	sys_info_t	sysinfo;
+	sys_info_t sysinfo;
 	unsigned long div;		/* total divisor udiv * bdiv */
 	unsigned long umin;		/* minimum udiv	*/
-	unsigned short diff;    /* smallest diff */
-	unsigned long udiv;     /* best udiv */
-
-	unsigned short idiff;   /* current diff */
-	unsigned short ibdiv;   /* current bdiv */
+	unsigned short diff;		/* smallest diff */
+	unsigned long udiv;		/* best udiv */
+	unsigned short idiff;		/* current diff */
+	unsigned short ibdiv;		/* current bdiv */
 	unsigned long i;
-	unsigned long est;      /* current estimate */
+	unsigned long est;		/* current estimate */
 
-	get_sys_info( &sysinfo );
+	get_sys_info(&sysinfo);
 
-	udiv = 32;     /* Assume lowest possible serial clk */
-	div = sysinfo.freqPLB/(16*baudrate); /* total divisor */
-	umin = sysinfo.pllOpbDiv<<1; /* 2 x OPB divisor */
-	diff = 32;      /* highest possible */
+	udiv = 32;			/* Assume lowest possible serial clk */
+	div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
+	umin = sysinfo.pllOpbDiv << 1;	/* 2 x OPB divisor */
+	diff = 32;			/* highest possible */
 
 	/* i is the test udiv value -- start with the largest
 	 * possible (32) to minimize serial clock and constrain
 	 * search to umin.
 	 */
-	for( i = 32; i > umin; i-- ){
-		ibdiv = div/i;
+	for (i = 32; i > umin; i--) {
+		ibdiv = div / i;
 		est = i * ibdiv;
 		idiff = (est > div) ? (est-div) : (div-est);
-		if( idiff == 0 ){
+		if (idiff == 0) {
 			udiv = i;
 			break;      /* can't do better */
-		}
-		else if( idiff < diff ){
+		} else if (idiff < diff) {
 			udiv = i;       /* best so far */
 			diff = idiff;   /* update lowest diff*/
 		}
 	}
 
 	*pudiv = udiv;
-	*pbdiv = div/udiv;
+	*pbdiv = div / udiv;
+}
+
+#elif defined(CONFIG_405EZ)
+
+static void serial_divs (int baudrate, unsigned long *pudiv,
+			 unsigned short *pbdiv)
+{
+	sys_info_t sysinfo;
+	unsigned long div;		/* total divisor udiv * bdiv */
+	unsigned long umin;		/* minimum udiv	*/
+	unsigned short diff;		/* smallest diff */
+	unsigned long udiv;		/* best udiv */
+	unsigned short idiff;		/* current diff */
+	unsigned short ibdiv;		/* current bdiv */
+	unsigned long i;
+	unsigned long est;		/* current estimate */
+	unsigned long plloutb;
+	u32 reg;
+
+	get_sys_info(&sysinfo);
 
+	plloutb = ((CONFIG_SYS_CLK_FREQ * sysinfo.pllFwdDiv * sysinfo.pllFbkDiv)
+		   / sysinfo.pllFwdDivB);
+	udiv = 256;			/* Assume lowest possible serial clk */
+	div = plloutb / (16 * baudrate); /* total divisor */
+	umin = (plloutb / get_OPB_freq()) << 1;	/* 2 x OPB divisor */
+	diff = 256;			/* highest possible */
+
+	/* i is the test udiv value -- start with the largest
+	 * possible (256) to minimize serial clock and constrain
+	 * search to umin.
+	 */
+	for (i = 256; i > umin; i--) {
+		ibdiv = div / i;
+		est = i * ibdiv;
+		idiff = (est > div) ? (est-div) : (div-est);
+		if (idiff == 0) {
+			udiv = i;
+			break;      /* can't do better */
+		} else if (idiff < diff) {
+			udiv = i;       /* best so far */
+			diff = idiff;   /* update lowest diff*/
+		}
+	}
+
+	*pudiv = udiv;
+	mfcpr(cprperd0, reg);
+	reg &= ~0x0000ffff;
+	reg |= ((udiv - 0) << 8) | (udiv - 0);
+	mtcpr(cprperd0, reg);
+	*pbdiv = div / udiv;
 }
 #endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK) */
 
@@ -518,6 +567,10 @@ int serial_init (void)
 	unsigned short bdiv;
 	volatile char val;
 
+#if defined(CONFIG_405EZ)
+	serial_divs(gd->baudrate, &udiv, &bdiv);
+	clk = tmp = reg = 0;
+#else
 #ifdef CONFIG_405EP
 	reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
 	clk = gd->cpu_clk;
@@ -548,9 +601,9 @@ int serial_init (void)
 	reg |= (udiv - 1) << CR0_UDIV_POS;	/* set the UART divisor */
 	mtdcr (cntrl0, reg);
 #endif /* CONFIG_405EP */
-
 	tmp = gd->baudrate * udiv * 16;
 	bdiv = (clk + tmp / 2) / tmp;
+#endif /* CONFIG_405EZ */
 
 	out8(UART_BASE + UART_LCR, 0x80);	/* set DLAB bit */
 	out8(UART_BASE + UART_DLL, bdiv);	/* set baudrate divisor */
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 06220c3..028b11a 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -767,11 +767,119 @@ ulong get_PCI_freq (void)
 	return val;
 }
 
+#elif defined(CONFIG_405EZ)
+void get_sys_info (PPC405_SYS_INFO * sysInfo)
+{
+	unsigned long cpr_plld;
+	unsigned long cpr_primad;
+	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
+	unsigned long primad_cpudv;
+	unsigned long m;
+
+	/*
+	 * Read PLL Mode registers
+	 */
+	mfcpr(cprplld, cpr_plld);
+
+	/*
+	 * Determine forward divider A
+	 */
+	sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
+
+	/*
+	 * Determine forward divider B (should be equal to A)
+	 */
+	sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
+	if (sysInfo->pllFwdDivB == 0) {
+		sysInfo->pllFwdDivB = 8;
+	}
+
+	/*
+	 * Determine FBK_DIV.
+	 */
+	sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+	if (sysInfo->pllFbkDiv == 0) {
+		sysInfo->pllFbkDiv = 256;
+	}
+
+	/*
+	 * Read CPR_PRIMAD register
+	 */
+	mfcpr(cprprimad, cpr_primad);
+	/*
+	 * Determine PLB_DIV.
+	 */
+	sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
+	if (sysInfo->pllPlbDiv == 0) {
+		sysInfo->pllPlbDiv = 16;
+	}
+
+	/*
+	 * Determine EXTBUS_DIV.
+	 */
+	sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
+	if (sysInfo->pllExtBusDiv == 0) {
+		sysInfo->pllExtBusDiv = 16;
+	}
+
+	/*
+	 * Determine OPB_DIV.
+	 */
+	sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
+	if (sysInfo->pllOpbDiv == 0) {
+		sysInfo->pllOpbDiv = 16;
+	}
+
+	/*
+	 * Determine the M factor
+	 */
+	m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+
+	/*
+	 * Determine VCO clock frequency
+	 */
+	sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+		(unsigned long long)sysClkPeriodPs;
+
+	/*
+	 * Determine CPU clock frequency
+	 */
+	primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
+	if (primad_cpudv == 0) {
+		primad_cpudv = 16;
+	}
+
+	sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / primad_cpudv;
+
+	/*
+	 * Determine PLB clock frequency
+	 */
+	sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / sysInfo->pllPlbDiv;
+}
+
+/********************************************
+ * get_OPB_freq
+ * return OPB bus freq in Hz
+ *********************************************/
+ulong get_OPB_freq (void)
+{
+	ulong val = 0;
+
+	PPC405_SYS_INFO sys_info;
+
+	get_sys_info (&sys_info);
+	val = (CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / sys_info.pllOpbDiv;
+
+	return val;
+}
+
 #endif
 
 int get_clocks (void)
 {
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+    defined(CONFIG_440) || defined(CONFIG_405)
 	sys_info_t sys_info;
 
 	get_sys_info (&sys_info);
@@ -796,7 +904,9 @@ ulong get_bus_freq (ulong dummy)
 {
 	ulong val;
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_440) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+    defined(CONFIG_440) || defined(CONFIG_405)
 	sys_info_t sys_info;
 
 	get_sys_info (&sys_info);
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 54be37c..d918b3e 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -699,7 +699,9 @@ _start:
 #endif	/* CONFIG_IOP480 */
 
 /*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+    defined(CONFIG_405)
 	/*----------------------------------------------------------------------- */
 	/* Clear and set up some registers. */
 	/*----------------------------------------------------------------------- */
@@ -727,13 +729,13 @@ _start:
 	/*----------------------------------------------------------------------- */
 	/* Enable two 128MB cachable regions. */
 	/*----------------------------------------------------------------------- */
-	addis	r4,r0,0x8000
-	addi	r4,r4,0x0001
+	lis	r4,0x8000
+	ori	r4,r4,0x0001
 	mticcr	r4			/* instruction cache */
 	isync
 
-	addis	r4,r0,0x0000
-	addi	r4,r4,0x0000
+	lis	r4,0x0000
+	ori	r4,r4,0x0000
 	mtdccr	r4			/* data cache */
 
 #if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
@@ -755,6 +757,70 @@ _start:
 #endif /* CONFIG_405EP */
 
 #if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)
+/* test-only... (clean up later when NAND booting is supported) */
+#if defined(CONFIG_405EZ)
+	/********************************************************************
+	 * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
+	 *******************************************************************/
+	/*
+	 * We can map the OCM on the PLB3, so map it at
+	 * CFG_OCM_DATA_ADDR + 0x8000
+	 */
+	lis	r3,CFG_OCM_DATA_ADDR@h	/* OCM location */
+	ori	r3,r3,CFG_OCM_DATA_ADDR@l
+	ori	r3,r3,0x8270	/* 32K Offset, 16K for Bank 1, R/W/Enable */
+	mtdcr	ocmplb3cr1,r3		/* Set PLB Access */
+	ori	r3,r3,0x4000		/* Add 0x4000 for bank 2 */
+	mtdcr	ocmplb3cr2,r3		/* Set PLB Access */
+	isync
+
+	lis	r3,CFG_OCM_DATA_ADDR@h  /* OCM location */
+	ori	r3,r3,CFG_OCM_DATA_ADDR@l
+	ori	r3,r3,0x0270            /* 16K for Bank 1, R/W/Enable */
+	mtdcr	ocmdscr1, r3            /* Set Data Side */
+	mtdcr	ocmiscr1, r3            /* Set Instruction Side */
+	ori	r3,r3,0x4000		/* Add 0x4000 for bank 2 */
+	mtdcr	ocmdscr2, r3            /* Set Data Side */
+	mtdcr	ocmiscr2, r3            /* Set Instruction Side */
+	addis	r3,0,0x0800             /* OCM Data Parity Disable - 1 Wait State */
+	mtdcr	ocmdsisdpc,r4
+
+	isync
+
+#if defined(CONFIG_NAND_SPL)
+	/*
+	 * 405EZ can boot from NAND Flash.
+	 * If we are booting the SPL (Pre-loader), copy code from
+	 * the mapped 4K NAND Flash to the OCM
+	 */
+	li	r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
+	mtctr	r4
+	lis	r2,CFG_NAND_BOOT_SPL_SRC@h
+	ori	r2,r2,CFG_NAND_BOOT_SPL_SRC@l
+	lis	r3,CFG_NAND_BOOT_SPL_DST@h
+	ori	r3,r3,CFG_NAND_BOOT_SPL_DST@l
+spl_loop:
+	lwzu	r4,4(r2)
+	stwu	r4,4(r3)
+	bdnz	spl_loop
+
+	/*
+	 * Jump to code in OCM Ram
+	 */
+	bl 	00f
+00:	mflr	r10
+	lis	r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
+	ori	r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
+	sub	r10,r10,r3
+	addi	r10,r10,28
+	mtlr	r10
+	blr
+start_ram:
+	sync
+	isync
+#endif
+#else
+/* ...test-only */
 	/********************************************************************
 	 * Setup OCM - On Chip Memory
 	 *******************************************************************/
@@ -774,6 +840,7 @@ _start:
 	addis	r4, 0, 0xC000		/* OCM data area enabled */
 	mtdcr	ocmdscntl, r4
 	isync
+#endif /* CONFIG_405EZ */
 #endif
 
 	/*----------------------------------------------------------------------- */
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
index ab852c5..c71a6a9 100644
--- a/cpu/ppc4xx/usb_ohci.c
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -76,7 +76,7 @@
 #define m16_swap(x) swap_16(x)
 #define m32_swap(x) swap_32(x)
 
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+#if defined(CONFIG_405EZ) || defined(CONFIG_440EP) || defined(CONFIG_440EPX)
 #define ohci_cpu_to_le16(x) (x)
 #define ohci_cpu_to_le32(x) (x)
 #else
@@ -1601,7 +1601,7 @@ int usb_lowlevel_init(void)
 	gohci.irq = -1;
 #if defined(CONFIG_440EP)
  	gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
-#elif defined(CONFIG_440EPX)
+#elif defined(CONFIG_440EPX) || defined(CFG_USB_HOST)
 	gohci.regs = (struct ohci_regs *)(CFG_USB_HOST);
 #endif
 
@@ -1625,8 +1625,10 @@ int usb_lowlevel_init(void)
 	ohci_inited = 1;
 	urb_finished = 1;
 
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
 	/* init the device driver */
 	usb_dev_init();
+#endif
 
 	return 0;
 }
diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h
index 685d48b..bddf9e5 100644
--- a/cpu/ppc4xx/vecnum.h
+++ b/cpu/ppc4xx/vecnum.h
@@ -231,6 +231,47 @@
 
 #else /* !defined(CONFIG_440) */
 
+#if defined(CONFIG_405EZ)
+#define VECNUM_D0		0	/* DMA channel 0		*/
+#define VECNUM_D1		1	/* DMA channel 1		*/
+#define VECNUM_D2		2	/* DMA channel 2		*/
+#define VECNUM_D3		3	/* DMA channel 3		*/
+#define VECNUM_1588		4	/* IEEE 1588 network synchronization */
+#define VECNUM_U0		5	/* UART0			*/
+#define VECNUM_U1		6	/* UART1			*/
+#define VECNUM_CAN0		7	/* CAN 0			*/
+#define VECNUM_CAN1		8	/* CAN 1			*/
+#define VECNUM_SPI		9	/* SPI				*/
+#define VECNUM_IIC0		10	/* I2C				*/
+#define VECNUM_CHT0		11	/* Chameleon timer high pri interrupt */
+#define VECNUM_CHT1		12	/* Chameleon timer high pri interrupt */
+#define VECNUM_USBH1		13	/* USB Host 1			*/
+#define VECNUM_USBH2		14	/* USB Host 2			*/
+#define VECNUM_USBDEV		15	/* USB Device			*/
+#define VECNUM_ETH0		16	/* 10/100 Ethernet interrupt status */
+#define VECNUM_EWU0		17	/* Ethernet wakeup sequence detected */
+
+#define VECNUM_MADMAL		18	/* Logical OR of following MadMAL int */
+#define VECNUM_MS		18	/*	MAL_SERR_INT 		*/
+#define VECNUM_TXDE		18	/* 	MAL_TXDE_INT 		*/
+#define VECNUM_RXDE		18	/*	MAL_RXDE_INT 		*/
+
+#define VECNUM_MTE		19	/* MAL TXEOB			*/
+#define VECNUM_MTE1		20	/* MAL TXEOB1			*/
+#define VECNUM_MRE		21	/* MAL RXEOB			*/
+#define VECNUM_NAND		22	/* NAND Flash controller	*/
+#define VECNUM_ADC		23	/* ADC				*/
+#define VECNUM_DAC		24	/* DAC				*/
+#define VECNUM_OPB2PLB		25	/* OPB to PLB bridge interrupt	*/
+#define VECNUM_RESERVED0	26	/* Reserved			*/
+#define VECNUM_EIR0		27	/* External interrupt 0		*/
+#define VECNUM_EIR1		28	/* External interrupt 1		*/
+#define VECNUM_EIR2		29	/* External interrupt 2		*/
+#define VECNUM_EIR3		30	/* External interrupt 3		*/
+#define VECNUM_EIR4		31	/* External interrupt 4		*/
+
+#else	/* !CONFIG_405EZ */
+
 #define VECNUM_U0           0           /* UART0                        */
 #define VECNUM_U1           1           /* UART1                        */
 #define VECNUM_D0           5           /* DMA channel 0                */
@@ -251,6 +292,7 @@
 #define VECNUM_EIR4         29          /* External interrupt 4         */
 #define VECNUM_EIR5         30          /* External interrupt 5         */
 #define VECNUM_EIR6         31          /* External interrupt 6         */
+#endif	/* defined(CONFIG_405EZ) */
 
 #endif /* defined(CONFIG_440) */
 
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index ad9fd49..0585962 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -298,6 +298,10 @@
 #define SPRN_SPRG1	0x111	/* Special Purpose Register General 1 */
 #define SPRN_SPRG2	0x112	/* Special Purpose Register General 2 */
 #define SPRN_SPRG3	0x113	/* Special Purpose Register General 3 */
+#define SPRN_SPRG4	0x114	/* Special Purpose Register General 4 */
+#define SPRN_SPRG5	0x115	/* Special Purpose Register General 5 */
+#define SPRN_SPRG6	0x116	/* Special Purpose Register General 6 */
+#define SPRN_SPRG7	0x117	/* Special Purpose Register General 7 */
 #define SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
 #define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
 #define SPRN_SRR2	0x3DE	/* Save/Restore Register 2 */
@@ -529,6 +533,10 @@
 #define SPRG1   SPRN_SPRG1
 #define SPRG2   SPRN_SPRG2
 #define SPRG3   SPRN_SPRG3
+#define SPRG4   SPRN_SPRG4
+#define SPRG5   SPRN_SPRG5
+#define SPRG6   SPRN_SPRG6
+#define SPRG7   SPRN_SPRG7
 #define SRR0	SPRN_SRR0	/* Save and Restore Register 0 */
 #define SRR1	SPRN_SRR1	/* Save and Restore Register 1 */
 #define SVR	SPRN_SVR	/* System Version Register */
@@ -731,6 +739,7 @@
 #define PVR_405CR_RC	0x40110145  /* same as pc405gp rev e */
 #define PVR_405EP_RA	0x51210950
 #define PVR_405GPR_RB	0x50910951
+#define PVR_405EZ_RA	0x41511460
 #define PVR_440GP_RB	0x40120440
 #define PVR_440GP_RC	0x40120481
 #define PVR_440EP_RA	0x42221850
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 30b44e3..464f6b5 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -83,6 +83,7 @@ typedef struct bd_info {
     defined(CONFIG_405GP) || \
     defined(CONFIG_405CR) || \
     defined(CONFIG_405EP) || \
+    defined(CONFIG_405EZ) || \
     defined(CONFIG_440)
 	unsigned char	bi_s_version[4];	/* Version of this structure */
 	unsigned char	bi_r_version[32];	/* Version of the ROM (AMCC) */
@@ -107,7 +108,8 @@ typedef struct bd_info {
 	unsigned char   bi_enet3addr[6];
 #endif
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
+    defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
     defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	unsigned int	bi_opbfreq;		/* OPB clock in Hz */
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
new file mode 100755
index 0000000..9e02ca3
--- /dev/null
+++ b/include/configs/acadia.h
@@ -0,0 +1,424 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * acadia.h - configuration for AMCC Acadia (405EZ)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_ACADIA			1	/* Board is Acadia	*/
+#define CONFIG_4xx			1	/* ... PPC4xx family	*/
+#define CONFIG_405EZ			1	/* Specifc 405EZ support*/
+#undef	CFG_DRAM_TEST				/* Disable-takes long time */
+#define CONFIG_SYS_CLK_FREQ	66666666	/* external freq to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_pre_init		*/
+#define	CONFIG_MISC_INIT_F	1	/* Use misc_init_f()		*/
+
+#define CONFIG_NO_SERIAL_EEPROM
+/*#undef CONFIG_NO_SERIAL_EEPROM*/
+
+#ifdef CONFIG_NO_SERIAL_EEPROM
+
+/*----------------------------------------------------------------------------
+ * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
+ * assuming a 66MHz input clock to the 405EZ.
+ *---------------------------------------------------------------------------*/
+/* #define PLLMR0_100_100_12 */
+#define PLLMR0_200_133_66
+/* #define PLLMR0_266_160_80 */
+/* #define PLLMR0_333_166_83 */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0xFE000000
+#define CFG_MONITOR_LEN		(256 * 1024)/* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(384 * 1024)/* Reserve 128 kB for malloc()	*/
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_USB_HOST		0xef603000	/* USB OHCI 1.1 controller	*/
+
+/*
+ * Define here the location of the environment variables (FLASH).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ *       supported for backward compatibility.
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+   #define CFG_ENV_IS_IN_FLASH	1 		/* use FLASH for environment vars	*/
+#else
+   #define CFG_ENV_IS_IN_NAND	1		/* use NAND for environment vars	*/
+#endif
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=acadia\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+		"bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"				\
+	"bootfile=acadia/uImage\0"					\
+	"kernel_addr=fff10000\0"					\
+	"ramdisk_addr=fff20000\0"					\
+	"initrd_high=30000000\0"					\
+	"load=tftp 200000 acadia/u-boot.bin\0"				\
+	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
+		"cp.b ${fileaddr} fffc0000 ${filesize};"		\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	"kozio=bootm ffc60000\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define	CONFIG_PHY_ADDR		0	/* PHY address			*/
+#define CONFIG_NET_MULTI	1
+#define CFG_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
+
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+#if 0 /* test-only */
+#define TEST_ONLY_NAND
+#endif
+
+#ifdef TEST_ONLY_NAND
+#define CMD_NAND		CFG_CMD_NAND
+#else
+#define CMD_NAND		0
+#endif
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#define CONFIG_SUPPORT_VFAT
+
+#define CONFIG_COMMANDS       (CONFIG_CMD_DFL	|	\
+			       CFG_CMD_ASKENV	|	\
+			       CFG_CMD_DHCP	|	\
+			       CFG_CMD_DTT	|	\
+			       CFG_CMD_DIAG	|	\
+			       CFG_CMD_EEPROM	|	\
+			       CFG_CMD_ELF	|	\
+			       CFG_CMD_FAT	|	\
+			       CFG_CMD_I2C	|	\
+			       CFG_CMD_IRQ	|	\
+			       CFG_CMD_MII	|	\
+			       CMD_NAND		|	\
+			       CFG_CMD_NET	|	\
+			       CFG_CMD_NFS	|	\
+			       CFG_CMD_PCI	|	\
+			       CFG_CMD_PING	|	\
+			       CFG_CMD_REGINFO	|	\
+			       CFG_CMD_SDRAM	|	\
+			       CFG_CMD_USB)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG					/* watchdog disabled		*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command		*/
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands	*/
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef	CFG_EXT_SERIAL_CLOCK			/* external serial clock */
+#define CFG_BASE_BAUD		691200
+#define CONFIG_BAUDRATE		115200
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
+#define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
+#define CONFIG_DTT_AD7414	1		/* use AD7414		*/
+#define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
+#define CFG_DTT_MAX_TEMP	70
+#define CFG_DTT_LOW_TEMP	-30
+#define CFG_DTT_HYSTERESIS	3
+
+#if 0 /* test-only... */
+/*-----------------------------------------------------------------------
+ * SPI stuff - Define to include SPI control
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_SPI
+#endif
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+
+#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS     1		    /* number of banks	    */
+#define CFG_MAX_FLASH_SECT	1024		    /* sectors per device   */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x40000 /* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif
+
+#ifdef TEST_ONLY_NAND
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		(CFG_NAND + CFG_NAND_CS)
+#define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		16384		/* For AMCC 405EZ CPU		*/
+#define CFG_CACHELINE_SIZE	32		/* ...				*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5		/* log base 2 of the above value*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM	1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR	0xF8000000
+#define CFG_OCM_DATA_SIZE	0x4000			/* 16K of onchip SRAM		*/
+#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR	/* inside of SRAM		*/
+#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE	/* End of used area in RAM	*/
+
+#define CFG_GBL_DATA_SIZE	128			/* size for initial data	*/
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+#define CFG_NAND		0xd0000000
+#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
+
+/* Memory Bank 0 (Flash) initialization */
+#define CFG_EBC_PB0AP		0x03337200
+#define CFG_EBC_PB0CR		0xfe0bc000 	/* BAS=0xFE0,BS=32MB,BU=R/W,BW=32bit	*/
+
+/* Memory Bank 1 (CRAM) initialization */
+#define CFG_EBC_PB1AP		0x030400c0
+#define CFG_EBC_PB1CR		0x000bc000
+
+/* Memory Bank 2 (CRAM) initialization */
+#define CFG_EBC_PB2AP		0x030400c0
+#define CFG_EBC_PB2CR		0x020bc000
+
+/* Memory Bank 3 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB3AP		0x018003c0
+#define CFG_EBC_PB3CR		(CFG_NAND | 0x1c000)
+
+/* Memory Bank 4 (CPLD) initialization */
+#define CFG_EBC_PB4AP		0x04006000
+#define CFG_EBC_PB4CR		0x80018000 	/* BAS=0x000,BS=16MB,BU=R/W,BW=32bit	*/
+
+#define CFG_EBC_CFG		0xf8400000
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO_0 setup (PPC405EZ specific)
+ *
+ * GPIO0[0-3]	- External Bus Controller CS_4 - CS_7 Outputs
+ * GPIO0[4]	- External Bus Controller Hold Input
+ * GPIO0[5]	- External Bus Controller Priority Input
+ * GPIO0[6]	- External Bus Controller HLDA Output
+ * GPIO0[7]	- External Bus Controller Bus Request Output
+ * GPIO0[8]	- CRAM Clk Output
+ * GPIO0[9]	- External Bus Controller Ready Input
+ * GPIO0[10]	- CRAM Adv Output
+ * GPIO0[11-24]	- NAND Flash Control Data -> Bypasses GPIO when enabled
+ * GPIO0[25]	- External DMA Request Input
+ * GPIO0[26]	- External DMA EOT I/O
+ * GPIO0[25]	- External DMA Ack_n Output
+ * GPIO0[17-23]	- External Interrupts IRQ0 - IRQ6 inputs
+ * GPIO0[28-30]	- Trace Outputs / PWM Inputs
+ * GPIO0[31]	- PWM_8 I/O
+ */
+#define CFG_GPIO0_TCR		0xC0000000
+#define CFG_GPIO0_OSRL		0x50000000
+#define CFG_GPIO0_OSRH		0x00000055
+#define CFG_GPIO0_ISR1L		0x00000000
+#define CFG_GPIO0_ISR1H		0x00000055
+#define CFG_GPIO0_TSRL		0x00000000
+#define CFG_GPIO0_TSRH		0x00000055
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO_1 setup (PPC405EZ specific)
+ *
+ * GPIO1[0-6]	- PWM_9 to PWM_15 I/O
+ * GPIO1[7]	- PWM_DIV_CLK (Out) / IRQ4 Input
+ * GPIO1[8]	- TS5 Output / DAC_IP_TRIG Input
+ * GPIO1[9]	- TS6 Output / ADC_IP_TRIG Input
+ * GPIO1[10-12]	- UART0 Control Inputs
+ * GPIO1[13]	- UART0_DTR_N Output/IEEE_1588_TS Output/TMRCLK Input
+ * GPIO1[14]	- UART0_RTS_N Output/SPI_SS_2_N Output
+ * GPIO1[15]	- SPI_SS_3_N Output/UART0_RI_N Input
+ * GPIO1[16]	- SPI_SS_1_N Output
+ * GPIO1[17-20]	- Trace Output/External Interrupts IRQ0 - IRQ3 inputs
+ */
+#define CFG_GPIO1_OSRH		0x55455555
+#define CFG_GPIO1_OSRL		0x40000110
+#define CFG_GPIO1_ISR1H		0x00000000
+#define CFG_GPIO1_ISR1L		0x15555445
+#define CFG_GPIO1_TSRH		0x00000000
+#define CFG_GPIO1_TSRL		0x00000000
+#define CFG_GPIO1_TCR		0xFFFF8014
+
+/*-----------------------------------------------------------------------
+ * EPLD Regs.
+ */
+#define	EPLD_BASE	0x80000000
+#define	EPLD_ETHRSTBOOT	0x10
+#define	EPLD_CTRL	0x14
+#define	EPLD_MUXOE	0x16
+
+/*
+ * State definations
+ */
+#define	LOAK_INIT	0x494e4954	/* ASCII "INIT" */
+#define	LOAK_NONE	0x4e4f4e45	/* ASCII "NONE" */
+#define	LOAK_CRAM	0x4352414d	/* ASCII "CRAM" */
+#define	LOAK_PSRAM	0x50535241	/* ASCII "PSRA" - PSRAM */
+#define	LOAK_OCM	0x4f434d20	/* ASCII "OCM " */
+#define	LOAK_ZERO	0x5a45524f	/* ASCII "ZERO" */
+#define	LOAK_SPL	0x53504c20	/* ASCII "SPL" */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+  #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+  #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+#endif	/* __CONFIG_H */
diff --git a/include/ppc405.h b/include/ppc405.h
index a49912c..08f10d2 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -117,6 +117,48 @@
 /*-----------------------------------------------------------------------------+
 |  Universal interrupt controller interrupts
 +-----------------------------------------------------------------------------*/
+#if defined(CONFIG_405EZ)
+#define UIC_DMA0	0x80000000	/* DMA chan. 0			*/
+#define UIC_DMA1	0x40000000	/* DMA chan. 1			*/
+#define UIC_DMA2	0x20000000	/* DMA chan. 2			*/
+#define UIC_DMA3	0x10000000	/* DMA chan. 3			*/
+#define UIC_1588	0x08000000	/* IEEE 1588 network synchronization */
+#define UIC_UART0	0x04000000	/* UART 0			*/
+#define UIC_UART1	0x02000000	/* UART 1			*/
+#define UIC_CAN0	0x01000000	/* CAN 0			*/
+#define UIC_CAN1	0x00800000	/* CAN 1			*/
+#define UIC_SPI		0x00400000	/* SPI				*/
+#define UIC_IIC		0x00200000	/* IIC				*/
+#define UIC_CHT0	0x00100000	/* Chameleon timer high pri interrupt */
+#define UIC_CHT1	0x00080000	/* Chameleon timer high pri interrupt */
+#define UIC_USBH1	0x00040000	/* USB Host 1			*/
+#define UIC_USBH2	0x00020000	/* USB Host 2			*/
+#define UIC_USBDEV	0x00010000	/* USB Device			*/
+#define UIC_ENET	0x00008000	/* Ethernet interrupt status 	*/
+#define UIC_ENET1	0x00008000	/* dummy define              	*/
+#define UIC_EMAC_WAKE	0x00004000	/* EMAC wake up			*/
+
+#define UIC_MADMAL	0x00002000	/* Logical OR of following MadMAL int */
+#define UIC_MAL_SERR 	0x00002000	/*   MAL SERR			*/
+#define UIC_MAL_TXDE	0x00002000	/*   MAL TXDE			*/
+#define UIC_MAL_RXDE	0x00002000	/*   MAL RXDE			*/
+
+#define UIC_MAL_TXEOB	0x00001000	/* MAL TXEOB			*/
+#define UIC_MAL_TXEOB1	0x00000800	/* MAL TXEOB1			*/
+#define UIC_MAL_RXEOB	0x00000400	/* MAL RXEOB			*/
+#define UIC_NAND	0x00000200	/* NAND Flash controller	*/
+#define UIC_ADC		0x00000100	/* ADC				*/
+#define UIC_DAC		0x00000080	/* DAC				*/
+#define UIC_OPB2PLB	0x00000040	/* OPB to PLB bridge interrupt	*/
+#define UIC_RESERVED0	0x00000020	/* Reserved			*/
+#define UIC_EXT0	0x00000010	/* External  interrupt 0	*/
+#define UIC_EXT1	0x00000008	/* External  interrupt 1	*/
+#define UIC_EXT2	0x00000004	/* External  interrupt 2	*/
+#define UIC_EXT3	0x00000002	/* External  interrupt 3	*/
+#define UIC_EXT4	0x00000001	/* External  interrupt 4	*/
+
+#else	/* !defined(CONFIG_405EZ) */
+
 #define UIC_UART0     0x80000000      /* UART 0                             */
 #define UIC_UART1     0x40000000      /* UART 1                             */
 #define UIC_IIC       0x20000000      /* IIC                                */
@@ -144,6 +186,7 @@
 #define UIC_EXT4      0x00000004      /* External  interrupt 4              */
 #define UIC_EXT5      0x00000002      /* External  interrupt 5              */
 #define UIC_EXT6      0x00000001      /* External  interrupt 6              */
+#endif	/* defined(CONFIG_405EZ) */
 
 /******************************************************************************
  * SDRAM Controller
@@ -496,6 +539,325 @@
  */
 #define VCO_MIN     500
 #define VCO_MAX     1000
+#elif defined(CONFIG_405EZ)
+/******************************************************************************
+ * SDR Registers
+ ******************************************************************************/
+#define SDR_DCR_BASE 0x0E
+#define sdrcfga (SDR_DCR_BASE+0x0)	/* ADDR */
+#define sdrcfgd (SDR_DCR_BASE+0x1)	/* Data */
+
+#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data)
+#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd)
+
+#define sdrnand0	0x4000
+#define sdrultra0	0x4040
+#define sdrultra1	0x4050
+#define sdricintstat	0x4510
+
+#define SDR_NAND0_NDEN		0x80000000
+
+#define SDR_ULTRA0_NDGPIOBP	0x80000000
+#define SDR_ULTRA0_CSN_MASK	0x78000000
+#define SDR_ULTRA0_CSNSEL0	0x40000000
+#define SDR_ULTRA0_CSNSEL1	0x20000000
+#define SDR_ULTRA0_CSNSEL2	0x10000000
+#define SDR_ULTRA0_CSNSEL3	0x08000000
+
+#define SDR_ULTRA1_LEDNENABLE	0x40000000
+
+#define SDR_ICRX_STAT	0x80000000
+#define SDR_ICTX0_STAT	0x40000000
+#define SDR_ICTX1_STAT	0x20000000
+
+/******************************************************************************
+ * Control
+ ******************************************************************************/
+#define CNTRL_DCR_BASE 0x0C
+#define cprcfga (CNTRL_DCR_BASE+0x0)   /* CPR addr reg     */
+#define cprcfgd (CNTRL_DCR_BASE+0x1)   /* CPR data reg     */
+
+/* CPR Registers */
+#define cprclkupd       0x020		/* CPR_CLKUPD */
+#define cprpllc         0x040		/* CPR_PLLC */
+#define cprplld         0x060		/* CPR_PLLD */
+#define cprprimad       0x080		/* CPR_PRIMAD */
+#define cprperd0        0x0e0		/* CPR_PERD0 */
+#define cprperd1        0x0e1		/* CPR_PERD1 */
+#define cprperc0        0x180		/* CPR_PERC0 */
+#define cprmisc0        0x181		/* CPR_MISC0 */
+#define cprmisc1        0x182		/* CPR_MISC1 */
+
+/*
+ * Macro for accessing the indirect CPR register
+ */
+#define mtcpr(reg, data)  mtdcr(cprcfga,reg);mtdcr(cprcfgd,data)
+#define mfcpr(reg, data)  mtdcr(cprcfga,reg);data = mfdcr(cprcfgd)
+
+#define CPR_CLKUPD_ENPLLCH_EN  0x40000000     /* Enable CPR PLL Changes */
+#define CPR_CLKUPD_ENDVCH_EN   0x20000000     /* Enable CPR Sys. Div. Changes */
+#define CPR_PERD0_SPIDV_MASK   0x000F0000     /* SPI Clock Divider */
+
+#define PLLD_FBDV_MASK         0x1F000000     /* PLL feedback divider value */
+#define PLLD_FWDVA_MASK        0x000F0000     /* PLL forward divider A value */
+#define PLLD_FWDVB_MASK        0x00000700     /* PLL forward divider B value */
+
+#define PRIMAD_CPUDV_MASK      0x0F000000     /* CPU Clock Divisor Mask */
+#define PRIMAD_PLBDV_MASK      0x000F0000     /* PLB Clock Divisor Mask */
+#define PRIMAD_OPBDV_MASK      0x00000F00     /* OPB Clock Divisor Mask */
+#define PRIMAD_EBCDV_MASK      0x0000000F     /* EBC Clock Divisor Mask */
+
+#define PERD0_PWMDV_MASK       0xFF000000     /* PWM Divider Mask */
+#define PERD0_SPIDV_MASK       0x000F0000     /* SPI Divider Mask */
+#define PERD0_U0DV_MASK        0x0000FF00     /* UART 0 Divider Mask */
+#define PERD0_U1DV_MASK        0x000000FF     /* UART 1 Divider Mask */
+
+#if 0 /* Deprecated */
+#define CNTRL_DCR_BASE 0x0f0
+#define cpc0_pllmr0   (CNTRL_DCR_BASE+0x0)  /* PLL mode  register 0                */
+#define cpc0_boot     (CNTRL_DCR_BASE+0x1)  /* Clock status register               */
+#define cpc0_epctl    (CNTRL_DCR_BASE+0x3)  /* EMAC to PHY control register        */
+#define cpc0_pllmr1   (CNTRL_DCR_BASE+0x4)  /* PLL mode  register 1                */
+#define cpc0_ucr      (CNTRL_DCR_BASE+0x5)  /* UART control register               */
+#define cpc0_pci      (CNTRL_DCR_BASE+0x9)  /* PCI control register                */
+
+#define CPC0_PLLMR0  (CNTRL_DCR_BASE+0x0)  /* PLL mode 0 register          */
+#define CPC0_BOOT    (CNTRL_DCR_BASE+0x1)  /* Chip Clock Status register   */
+#define CPC0_CR1     (CNTRL_DCR_BASE+0x2)  /* Chip Control 1 register      */
+#define CPC0_EPRCSR  (CNTRL_DCR_BASE+0x3)  /* EMAC PHY Rcv Clk Src register*/
+#define CPC0_PLLMR1  (CNTRL_DCR_BASE+0x4)  /* PLL mode 1 register          */
+#define CPC0_UCR     (CNTRL_DCR_BASE+0x5)  /* UART Control register        */
+#define CPC0_SRR     (CNTRL_DCR_BASE+0x6)  /* Soft Reset register          */
+#define CPC0_JTAGID  (CNTRL_DCR_BASE+0x7)  /* JTAG ID register             */
+#define CPC0_SPARE   (CNTRL_DCR_BASE+0x8)  /* Spare DCR                    */
+#define CPC0_PCI     (CNTRL_DCR_BASE+0x9)  /* PCI Control register         */
+
+/* Bit definitions */
+#define PLLMR0_CPU_DIV_MASK      0x00300000     /* CPU clock divider */
+#define PLLMR0_CPU_DIV_BYPASS    0x00000000
+#define PLLMR0_CPU_DIV_2         0x00100000
+#define PLLMR0_CPU_DIV_3         0x00200000
+#define PLLMR0_CPU_DIV_4         0x00300000
+
+#define PLLMR0_CPU_TO_PLB_MASK   0x00030000     /* CPU:PLB Frequency Divisor */
+#define PLLMR0_CPU_PLB_DIV_1     0x00000000
+#define PLLMR0_CPU_PLB_DIV_2     0x00010000
+#define PLLMR0_CPU_PLB_DIV_3     0x00020000
+#define PLLMR0_CPU_PLB_DIV_4     0x00030000
+
+#define PLLMR0_OPB_TO_PLB_MASK   0x00003000     /* OPB:PLB Frequency Divisor */
+#define PLLMR0_OPB_PLB_DIV_1     0x00000000
+#define PLLMR0_OPB_PLB_DIV_2     0x00001000
+#define PLLMR0_OPB_PLB_DIV_3     0x00002000
+#define PLLMR0_OPB_PLB_DIV_4     0x00003000
+
+#define PLLMR0_EXB_TO_PLB_MASK   0x00000300     /* External Bus:PLB Divisor  */
+#define PLLMR0_EXB_PLB_DIV_2     0x00000000
+#define PLLMR0_EXB_PLB_DIV_3     0x00000100
+#define PLLMR0_EXB_PLB_DIV_4     0x00000200
+#define PLLMR0_EXB_PLB_DIV_5     0x00000300
+
+#define PLLMR0_MAL_TO_PLB_MASK   0x00000030     /* MAL:PLB Divisor  */
+#define PLLMR0_MAL_PLB_DIV_1     0x00000000
+#define PLLMR0_MAL_PLB_DIV_2     0x00000010
+#define PLLMR0_MAL_PLB_DIV_3     0x00000020
+#define PLLMR0_MAL_PLB_DIV_4     0x00000030
+
+#define PLLMR0_PCI_TO_PLB_MASK   0x00000003     /* PCI:PLB Frequency Divisor */
+#define PLLMR0_PCI_PLB_DIV_1     0x00000000
+#define PLLMR0_PCI_PLB_DIV_2     0x00000001
+#define PLLMR0_PCI_PLB_DIV_3     0x00000002
+#define PLLMR0_PCI_PLB_DIV_4     0x00000003
+
+#define PLLMR1_SSCS_MASK         0x80000000     /* Select system clock source */
+#define PLLMR1_PLLR_MASK         0x40000000     /* PLL reset */
+#define PLLMR1_FBMUL_MASK        0x00F00000     /* PLL feedback multiplier value */
+#define PLLMR1_FBMUL_DIV_16      0x00000000
+#define PLLMR1_FBMUL_DIV_1       0x00100000
+#define PLLMR1_FBMUL_DIV_2       0x00200000
+#define PLLMR1_FBMUL_DIV_3       0x00300000
+#define PLLMR1_FBMUL_DIV_4       0x00400000
+#define PLLMR1_FBMUL_DIV_5       0x00500000
+#define PLLMR1_FBMUL_DIV_6       0x00600000
+#define PLLMR1_FBMUL_DIV_7       0x00700000
+#define PLLMR1_FBMUL_DIV_8       0x00800000
+#define PLLMR1_FBMUL_DIV_9       0x00900000
+#define PLLMR1_FBMUL_DIV_10      0x00A00000
+#define PLLMR1_FBMUL_DIV_11      0x00B00000
+#define PLLMR1_FBMUL_DIV_12      0x00C00000
+#define PLLMR1_FBMUL_DIV_13      0x00D00000
+#define PLLMR1_FBMUL_DIV_14      0x00E00000
+#define PLLMR1_FBMUL_DIV_15      0x00F00000
+
+#define PLLMR1_FWDVA_MASK        0x00070000     /* PLL forward divider A value */
+#define PLLMR1_FWDVA_DIV_8       0x00000000
+#define PLLMR1_FWDVA_DIV_7       0x00010000
+#define PLLMR1_FWDVA_DIV_6       0x00020000
+#define PLLMR1_FWDVA_DIV_5       0x00030000
+#define PLLMR1_FWDVA_DIV_4       0x00040000
+#define PLLMR1_FWDVA_DIV_3       0x00050000
+#define PLLMR1_FWDVA_DIV_2       0x00060000
+#define PLLMR1_FWDVA_DIV_1       0x00070000
+#define PLLMR1_FWDVB_MASK        0x00007000     /* PLL forward divider B value */
+#define PLLMR1_TUNING_MASK       0x000003FF     /* PLL tune bits */
+
+/* Defines for CPC0_EPRCSR register */
+#define CPC0_EPRCSR_E0NFE          0x80000000
+#define CPC0_EPRCSR_E1NFE          0x40000000
+#define CPC0_EPRCSR_E1RPP          0x00000080
+#define CPC0_EPRCSR_E0RPP          0x00000040
+#define CPC0_EPRCSR_E1ERP          0x00000020
+#define CPC0_EPRCSR_E0ERP          0x00000010
+#define CPC0_EPRCSR_E1PCI          0x00000002
+#define CPC0_EPRCSR_E0PCI          0x00000001
+
+/* Defines for CPC0_BOOR Register */
+#define CPC0_BOOT_SEP                      0x00000002 /* serial EEPROM present  */
+
+/* Defines for CPC0_PLLMR1 Register fields */
+#define PLL_ACTIVE                 0x80000000
+#define CPC0_PLLMR1_SSCS           0x80000000
+#define PLL_RESET                  0x40000000
+#define CPC0_PLLMR1_PLLR           0x40000000
+    /* Feedback multiplier */
+#define PLL_FBKDIV                 0x00F00000
+#define CPC0_PLLMR1_FBDV           0x00F00000
+#define PLL_FBKDIV_16              0x00000000
+#define PLL_FBKDIV_1               0x00100000
+#define PLL_FBKDIV_2               0x00200000
+#define PLL_FBKDIV_3               0x00300000
+#define PLL_FBKDIV_4               0x00400000
+#define PLL_FBKDIV_5               0x00500000
+#define PLL_FBKDIV_6               0x00600000
+#define PLL_FBKDIV_7               0x00700000
+#define PLL_FBKDIV_8               0x00800000
+#define PLL_FBKDIV_9               0x00900000
+#define PLL_FBKDIV_10              0x00A00000
+#define PLL_FBKDIV_11              0x00B00000
+#define PLL_FBKDIV_12              0x00C00000
+#define PLL_FBKDIV_13              0x00D00000
+#define PLL_FBKDIV_14              0x00E00000
+#define PLL_FBKDIV_15              0x00F00000
+    /* Forward A divisor */
+#define PLL_FWDDIVA                0x00070000
+#define CPC0_PLLMR1_FWDVA          0x00070000
+#define PLL_FWDDIVA_8              0x00000000
+#define PLL_FWDDIVA_7              0x00010000
+#define PLL_FWDDIVA_6              0x00020000
+#define PLL_FWDDIVA_5              0x00030000
+#define PLL_FWDDIVA_4              0x00040000
+#define PLL_FWDDIVA_3              0x00050000
+#define PLL_FWDDIVA_2              0x00060000
+#define PLL_FWDDIVA_1              0x00070000
+    /* Forward B divisor */
+#define PLL_FWDDIVB                0x00007000
+#define CPC0_PLLMR1_FWDVB          0x00007000
+#define PLL_FWDDIVB_8              0x00000000
+#define PLL_FWDDIVB_7              0x00001000
+#define PLL_FWDDIVB_6              0x00002000
+#define PLL_FWDDIVB_5              0x00003000
+#define PLL_FWDDIVB_4              0x00004000
+#define PLL_FWDDIVB_3              0x00005000
+#define PLL_FWDDIVB_2              0x00006000
+#define PLL_FWDDIVB_1              0x00007000
+    /* PLL tune bits */
+#define PLL_TUNE_MASK            0x000003FF
+#define PLL_TUNE_2_M_3           0x00000133     /*  2 <= M <= 3               */
+#define PLL_TUNE_4_M_6           0x00000134     /*  3 <  M <= 6               */
+#define PLL_TUNE_7_M_10          0x00000138     /*  6 <  M <= 10              */
+#define PLL_TUNE_11_M_14         0x0000013C     /* 10 <  M <= 14              */
+#define PLL_TUNE_15_M_40         0x0000023E     /* 14 <  M <= 40              */
+#define PLL_TUNE_VCO_LOW         0x00000000     /* 500MHz <= VCO <=  800MHz   */
+#define PLL_TUNE_VCO_HI          0x00000080     /* 800MHz <  VCO <= 1000MHz   */
+
+/* Defines for CPC0_PLLMR0 Register fields */
+    /* CPU divisor */
+#define PLL_CPUDIV                 0x00300000
+#define CPC0_PLLMR0_CCDV           0x00300000
+#define PLL_CPUDIV_1               0x00000000
+#define PLL_CPUDIV_2               0x00100000
+#define PLL_CPUDIV_3               0x00200000
+#define PLL_CPUDIV_4               0x00300000
+    /* PLB divisor */
+#define PLL_PLBDIV                 0x00030000
+#define CPC0_PLLMR0_CBDV           0x00030000
+#define PLL_PLBDIV_1               0x00000000
+#define PLL_PLBDIV_2               0x00010000
+#define PLL_PLBDIV_3               0x00020000
+#define PLL_PLBDIV_4               0x00030000
+    /* OPB divisor */
+#define PLL_OPBDIV                 0x00003000
+#define CPC0_PLLMR0_OPDV           0x00003000
+#define PLL_OPBDIV_1               0x00000000
+#define PLL_OPBDIV_2               0x00001000
+#define PLL_OPBDIV_3               0x00002000
+#define PLL_OPBDIV_4               0x00003000
+    /* EBC divisor */
+#define PLL_EXTBUSDIV              0x00000300
+#define CPC0_PLLMR0_EPDV           0x00000300
+#define PLL_EXTBUSDIV_2            0x00000000
+#define PLL_EXTBUSDIV_3            0x00000100
+#define PLL_EXTBUSDIV_4            0x00000200
+#define PLL_EXTBUSDIV_5            0x00000300
+    /* MAL divisor */
+#define PLL_MALDIV                 0x00000030
+#define CPC0_PLLMR0_MPDV           0x00000030
+#define PLL_MALDIV_1               0x00000000
+#define PLL_MALDIV_2               0x00000010
+#define PLL_MALDIV_3               0x00000020
+#define PLL_MALDIV_4               0x00000030
+    /* PCI divisor */
+#define PLL_PCIDIV                 0x00000003
+#define CPC0_PLLMR0_PPFD           0x00000003
+#define PLL_PCIDIV_1               0x00000000
+#define PLL_PCIDIV_2               0x00000001
+#define PLL_PCIDIV_3               0x00000002
+#define PLL_PCIDIV_4               0x00000003
+
+/*
+ *-------------------------------------------------------------------------------
+ * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
+ * assuming a 33.3MHz input clock to the 405EP.
+ *-------------------------------------------------------------------------------
+ */
+#define PLLMR0_266_133_66  (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
+			    PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 |  \
+			    PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_266_133_66  (PLL_FBKDIV_8  |  \
+			    PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
+			    PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_133_66_66_33  (PLL_CPUDIV_1 | PLL_PLBDIV_1 |  \
+			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 |  \
+			      PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_133_66_66_33  (PLL_FBKDIV_4  |  \
+			      PLL_FWDDIVA_6 | PLL_FWDDIVB_6 |  \
+			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
+			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 |  \
+			      PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6  |  \
+			      PLL_FWDDIVA_4 | PLL_FWDDIVB_4 |  \
+			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
+			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 |  \
+			      PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8  |  \
+			      PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
+			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 |  \
+			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 |  \
+			      PLL_MALDIV_1 | PLL_PCIDIV_2)
+#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8  |  \
+			      PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
+			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+
+/*
+ * PLL Voltage Controlled Oscillator (VCO) definitions
+ * Maximum and minimum values (in MHz) for correct PLL operation.
+ */
+#define VCO_MIN     500
+#define VCO_MAX     1000
+#endif /* #if 0 */
 #else /* #ifdef CONFIG_405EP */
 /******************************************************************************
  * Control
@@ -578,6 +940,121 @@
 /******************************************************************************
  * Memory Access Layer
  ******************************************************************************/
+#if defined(CONFIG_405EZ)
+#define	MAL_DCR_BASE	0x380
+#define	malmcr		(MAL_DCR_BASE+0x00)	/* MAL Config reg	      */
+#define	malesr		(MAL_DCR_BASE+0x01)	/* Err Status reg (Read/Clear)*/
+#define	malier		(MAL_DCR_BASE+0x02)	/* Interrupt enable reg	      */
+#define	maldbr		(MAL_DCR_BASE+0x03)	/* Mal Debug reg (Read only)  */
+#define	maltxcasr	(MAL_DCR_BASE+0x04)	/* TX Channel active reg (set)*/
+#define	maltxcarr	(MAL_DCR_BASE+0x05)	/* TX Channel active reg (Reset)     */
+#define	maltxeobisr	(MAL_DCR_BASE+0x06)	/* TX End of buffer int status reg   */
+#define	maltxdeir	(MAL_DCR_BASE+0x07)	/* TX Descr. Error Int reg    */
+/*				      0x08-0x0F	   Reserved		      */
+#define	malrxcasr	(MAL_DCR_BASE+0x10)	/* RX Channel active reg (set)*/
+#define	malrxcarr	(MAL_DCR_BASE+0x11)	/* RX Channel active reg (Reset)     */
+#define	malrxeobisr	(MAL_DCR_BASE+0x12)	/* RX End of buffer int status reg   */
+#define	malrxdeir	(MAL_DCR_BASE+0x13)	/* RX Descr. Error Int reg  */
+/*				      0x14-0x1F	   Reserved		    */
+#define	maltxctp0r	(MAL_DCR_BASE+0x20)  /* TX 0 Channel table ptr reg  */
+#define	maltxctp1r	(MAL_DCR_BASE+0x21)  /* TX 1 Channel table ptr reg  */
+#define	maltxctp2r	(MAL_DCR_BASE+0x22)  /* TX 2 Channel table ptr reg  */
+#define	maltxctp3r	(MAL_DCR_BASE+0x23)  /* TX 3 Channel table ptr reg  */
+#define	maltxctp4r	(MAL_DCR_BASE+0x24)  /* TX 4 Channel table ptr reg  */
+#define	maltxctp5r	(MAL_DCR_BASE+0x25)  /* TX 5 Channel table ptr reg  */
+#define	maltxctp6r	(MAL_DCR_BASE+0x26)  /* TX 6 Channel table ptr reg  */
+#define	maltxctp7r	(MAL_DCR_BASE+0x27)  /* TX 7 Channel table ptr reg  */
+#define	maltxctp8r	(MAL_DCR_BASE+0x28)  /* TX 8 Channel table ptr reg  */
+#define	maltxctp9r	(MAL_DCR_BASE+0x29)  /* TX 9 Channel table ptr reg  */
+#define	maltxctp10r	(MAL_DCR_BASE+0x2A)  /* TX 10 Channel table ptr reg */
+#define	maltxctp11r	(MAL_DCR_BASE+0x2B)  /* TX 11 Channel table ptr reg */
+#define	maltxctp12r	(MAL_DCR_BASE+0x2C)  /* TX 12 Channel table ptr reg */
+#define	maltxctp13r	(MAL_DCR_BASE+0x2D)  /* TX 13 Channel table ptr reg */
+#define	maltxctp14r	(MAL_DCR_BASE+0x2E)  /* TX 14 Channel table ptr reg */
+#define	maltxctp15r	(MAL_DCR_BASE+0x2F)  /* TX 15 Channel table ptr reg */
+#define	maltxctp16r	(MAL_DCR_BASE+0x30)  /* TX 16 Channel table ptr reg */
+#define	maltxctp17r	(MAL_DCR_BASE+0x31)  /* TX 17 Channel table ptr reg */
+#define	maltxctp18r	(MAL_DCR_BASE+0x32)  /* TX 18 Channel table ptr reg */
+#define	maltxctp19r	(MAL_DCR_BASE+0x33)  /* TX 19 Channel table ptr reg */
+#define	maltxctp20r	(MAL_DCR_BASE+0x34)  /* TX 20 Channel table ptr reg */
+#define	maltxctp21r	(MAL_DCR_BASE+0x35)  /* TX 21 Channel table ptr reg */
+#define	maltxctp22r	(MAL_DCR_BASE+0x36)  /* TX 22 Channel table ptr reg */
+#define	maltxctp23r	(MAL_DCR_BASE+0x37)  /* TX 23 Channel table ptr reg */
+#define	maltxctp24r	(MAL_DCR_BASE+0x38)  /* TX 24 Channel table ptr reg */
+#define	maltxctp25r	(MAL_DCR_BASE+0x39)  /* TX 25 Channel table ptr reg */
+#define	maltxctp26r	(MAL_DCR_BASE+0x3A)  /* TX 26 Channel table ptr reg */
+#define	maltxctp27r	(MAL_DCR_BASE+0x3B)  /* TX 27 Channel table ptr reg */
+#define	maltxctp28r	(MAL_DCR_BASE+0x3C)  /* TX 28 Channel table ptr reg */
+#define	maltxctp29r	(MAL_DCR_BASE+0x3D)  /* TX 29 Channel table ptr reg */
+#define	maltxctp30r	(MAL_DCR_BASE+0x3E)  /* TX 30 Channel table ptr reg */
+#define	maltxctp31r	(MAL_DCR_BASE+0x3F)  /* TX 31 Channel table ptr reg */
+#define	malrxctp0r	(MAL_DCR_BASE+0x40)  /* RX 0 Channel table ptr reg  */
+#define	malrxctp1r	(MAL_DCR_BASE+0x41)  /* RX 1 Channel table ptr reg  */
+#define	malrxctp2r	(MAL_DCR_BASE+0x42)  /* RX 2 Channel table ptr reg  */
+#define	malrxctp3r	(MAL_DCR_BASE+0x43)  /* RX 3 Channel table ptr reg  */
+#define	malrxctp4r	(MAL_DCR_BASE+0x44)  /* RX 4 Channel table ptr reg  */
+#define	malrxctp5r	(MAL_DCR_BASE+0x45)  /* RX 5 Channel table ptr reg  */
+#define	malrxctp6r	(MAL_DCR_BASE+0x46)  /* RX 6 Channel table ptr reg  */
+#define	malrxctp7r	(MAL_DCR_BASE+0x47)  /* RX 7 Channel table ptr reg  */
+#define	malrxctp8r	(MAL_DCR_BASE+0x48)  /* RX 8 Channel table ptr reg  */
+#define	malrxctp9r	(MAL_DCR_BASE+0x49)  /* RX 9 Channel table ptr reg  */
+#define	malrxctp10r	(MAL_DCR_BASE+0x4A)  /* RX 10 Channel table ptr reg */
+#define	malrxctp11r	(MAL_DCR_BASE+0x4B)  /* RX 11 Channel table ptr reg */
+#define	malrxctp12r	(MAL_DCR_BASE+0x4C)  /* RX 12 Channel table ptr reg */
+#define	malrxctp13r	(MAL_DCR_BASE+0x4D)  /* RX 13 Channel table ptr reg */
+#define	malrxctp14r	(MAL_DCR_BASE+0x4E)  /* RX 14 Channel table ptr reg */
+#define	malrxctp15r	(MAL_DCR_BASE+0x4F)  /* RX 15 Channel table ptr reg */
+#define	malrxctp16r	(MAL_DCR_BASE+0x50)  /* RX 16 Channel table ptr reg */
+#define	malrxctp17r	(MAL_DCR_BASE+0x51)  /* RX 17 Channel table ptr reg */
+#define	malrxctp18r	(MAL_DCR_BASE+0x52)  /* RX 18 Channel table ptr reg */
+#define	malrxctp19r	(MAL_DCR_BASE+0x53)  /* RX 19 Channel table ptr reg */
+#define	malrxctp20r	(MAL_DCR_BASE+0x54)  /* RX 20 Channel table ptr reg */
+#define	malrxctp21r	(MAL_DCR_BASE+0x55)  /* RX 21 Channel table ptr reg */
+#define	malrxctp22r	(MAL_DCR_BASE+0x56)  /* RX 22 Channel table ptr reg */
+#define	malrxctp23r	(MAL_DCR_BASE+0x57)  /* RX 23 Channel table ptr reg */
+#define	malrxctp24r	(MAL_DCR_BASE+0x58)  /* RX 24 Channel table ptr reg */
+#define	malrxctp25r	(MAL_DCR_BASE+0x59)  /* RX 25 Channel table ptr reg */
+#define	malrxctp26r	(MAL_DCR_BASE+0x5A)  /* RX 26 Channel table ptr reg */
+#define	malrxctp27r	(MAL_DCR_BASE+0x5B)  /* RX 27 Channel table ptr reg */
+#define	malrxctp28r	(MAL_DCR_BASE+0x5C)  /* RX 28 Channel table ptr reg */
+#define	malrxctp29r	(MAL_DCR_BASE+0x5D)  /* RX 29 Channel table ptr reg */
+#define	malrxctp30r	(MAL_DCR_BASE+0x5E)  /* RX 30 Channel table ptr reg */
+#define	malrxctp31r	(MAL_DCR_BASE+0x5F)  /* RX 31 Channel table ptr reg */
+#define	malrcbs0	(MAL_DCR_BASE+0x60)  /* RX 0 Channel buffer size reg */
+#define	malrcbs1	(MAL_DCR_BASE+0x61)  /* RX 1 Channel buffer size reg */
+#define	malrcbs2	(MAL_DCR_BASE+0x62)  /* RX 2 Channel buffer size reg */
+#define	malrcbs3	(MAL_DCR_BASE+0x63)  /* RX 3 Channel buffer size reg */
+#define	malrcbs4	(MAL_DCR_BASE+0x64)  /* RX 4 Channel buffer size reg */
+#define	malrcbs5	(MAL_DCR_BASE+0x65)  /* RX 5 Channel buffer size reg */
+#define	malrcbs6	(MAL_DCR_BASE+0x66)  /* RX 6 Channel buffer size reg */
+#define	malrcbs7	(MAL_DCR_BASE+0x67)  /* RX 7 Channel buffer size reg */
+#define	malrcbs8	(MAL_DCR_BASE+0x68)  /* RX 8 Channel buffer size reg */
+#define	malrcbs9	(MAL_DCR_BASE+0x69)  /* RX 9 Channel buffer size reg */
+#define	malrcbs10	(MAL_DCR_BASE+0x6A)  /* RX 10 Channel buffer size reg */
+#define	malrcbs11	(MAL_DCR_BASE+0x6B)  /* RX 11 Channel buffer size reg */
+#define	malrcbs12	(MAL_DCR_BASE+0x6C)  /* RX 12 Channel buffer size reg */
+#define	malrcbs13	(MAL_DCR_BASE+0x6D)  /* RX 13 Channel buffer size reg */
+#define	malrcbs14	(MAL_DCR_BASE+0x6E)  /* RX 14 Channel buffer size reg */
+#define	malrcbs15	(MAL_DCR_BASE+0x6F)  /* RX 15 Channel buffer size reg */
+#define	malrcbs16	(MAL_DCR_BASE+0x70)  /* RX 16 Channel buffer size reg */
+#define	malrcbs17	(MAL_DCR_BASE+0x71)  /* RX 17 Channel buffer size reg */
+#define	malrcbs18	(MAL_DCR_BASE+0x72)  /* RX 18 Channel buffer size reg */
+#define	malrcbs19	(MAL_DCR_BASE+0x73)  /* RX 19 Channel buffer size reg */
+#define	malrcbs20	(MAL_DCR_BASE+0x74)  /* RX 20 Channel buffer size reg */
+#define	malrcbs21	(MAL_DCR_BASE+0x75)  /* RX 21 Channel buffer size reg */
+#define	malrcbs22	(MAL_DCR_BASE+0x76)  /* RX 22 Channel buffer size reg */
+#define	malrcbs23	(MAL_DCR_BASE+0x77)  /* RX 23 Channel buffer size reg */
+#define	malrcbs24	(MAL_DCR_BASE+0x78)  /* RX 24 Channel buffer size reg */
+#define	malrcbs25	(MAL_DCR_BASE+0x79)  /* RX 25 Channel buffer size reg */
+#define	malrcbs26	(MAL_DCR_BASE+0x7A)  /* RX 26 Channel buffer size reg */
+#define	malrcbs27	(MAL_DCR_BASE+0x7B)  /* RX 27 Channel buffer size reg */
+#define	malrcbs28	(MAL_DCR_BASE+0x7C)  /* RX 28 Channel buffer size reg */
+#define	malrcbs29	(MAL_DCR_BASE+0x7D)  /* RX 29 Channel buffer size reg */
+#define	malrcbs30	(MAL_DCR_BASE+0x7E)  /* RX 30 Channel buffer size reg */
+#define	malrcbs31	(MAL_DCR_BASE+0x7F)  /* RX 31 Channel buffer size reg */
+
+#else /* !defined(CONFIG_405EZ) */
+
 #define MAL_DCR_BASE 0x180
 #define malmcr  (MAL_DCR_BASE+0x00)  /* MAL Config reg                       */
 #define malesr  (MAL_DCR_BASE+0x01)  /* Error Status reg (Read/Clear)        */
@@ -598,6 +1075,7 @@
 #define malrxctp1r (MAL_DCR_BASE+0x41)  /* RX 1 Channel table pointer reg    */
 #define malrcbs0   (MAL_DCR_BASE+0x60)  /* RX 0 Channel buffer size reg      */
 #define malrcbs1   (MAL_DCR_BASE+0x61)  /* RX 1 Channel buffer size reg      */
+#endif /* defined(CONFIG_405EZ) */
 
 /*-----------------------------------------------------------------------------
 | IIC Register Offsets
@@ -635,15 +1113,76 @@
 /******************************************************************************
  * On Chip Memory
  ******************************************************************************/
+#if defined(CONFIG_405EZ)
+#define OCM_DCR_BASE 0x020
+#define ocmplb3cr1      (OCM_DCR_BASE+0x00)  /* OCM PLB3 Bank 1 Config Reg    */
+#define ocmplb3cr2      (OCM_DCR_BASE+0x01)  /* OCM PLB3 Bank 2 Config Reg    */
+#define ocmplb3bear     (OCM_DCR_BASE+0x02)  /* OCM PLB3 Bus Error Add Reg    */
+#define ocmplb3besr0    (OCM_DCR_BASE+0x03)  /* OCM PLB3 Bus Error Stat Reg 0 */
+#define ocmplb3besr1    (OCM_DCR_BASE+0x04)  /* OCM PLB3 Bus Error Stat Reg 1 */
+#define ocmcid          (OCM_DCR_BASE+0x05)  /* OCM Core ID                   */
+#define ocmrevid        (OCM_DCR_BASE+0x06)  /* OCM Revision ID               */
+#define ocmplb3dpc      (OCM_DCR_BASE+0x07)  /* OCM PLB3 Data Parity Check    */
+#define ocmdscr1        (OCM_DCR_BASE+0x08)  /* OCM D-side Bank 1 Config Reg  */
+#define ocmdscr2        (OCM_DCR_BASE+0x09)  /* OCM D-side Bank 2 Config Reg  */
+#define ocmiscr1        (OCM_DCR_BASE+0x0A)  /* OCM I-side Bank 1 Config Reg  */
+#define ocmiscr2        (OCM_DCR_BASE+0x0B)  /* OCM I-side Bank 2 Config Reg  */
+#define ocmdsisdpc      (OCM_DCR_BASE+0x0C)  /* OCM D-side/I-side Data Par Chk*/
+#define ocmdsisbear     (OCM_DCR_BASE+0x0D)  /* OCM D-side/I-side Bus Err Addr*/
+#define ocmdsisbesr     (OCM_DCR_BASE+0x0E)  /* OCM D-side/I-side Bus Err Stat*/
+#else
 #define OCM_DCR_BASE 0x018
 #define ocmisarc   (OCM_DCR_BASE+0x00)  /* OCM I-side address compare reg    */
 #define ocmiscntl  (OCM_DCR_BASE+0x01)  /* OCM I-side control reg            */
 #define ocmdsarc   (OCM_DCR_BASE+0x02)  /* OCM D-side address compare reg    */
 #define ocmdscntl  (OCM_DCR_BASE+0x03)  /* OCM D-side control reg            */
+#endif /* CONFIG_405EZ */
 
 /******************************************************************************
  * GPIO macro register defines
  ******************************************************************************/
+#if defined(CONFIG_405EZ)
+/* Only the 405EZ has 2 GPIOs */
+#define GPIO_BASE  0xEF600700
+#define GPIO0_OR		(GPIO_BASE+0x0)
+#define GPIO0_TCR		(GPIO_BASE+0x4)
+#define GPIO0_OSRL		(GPIO_BASE+0x8)
+#define GPIO0_OSRH		(GPIO_BASE+0xC)
+#define GPIO0_TSRL		(GPIO_BASE+0x10)
+#define GPIO0_TSRH		(GPIO_BASE+0x14)
+#define GPIO0_ODR		(GPIO_BASE+0x18)
+#define GPIO0_IR		(GPIO_BASE+0x1C)
+#define GPIO0_RR1		(GPIO_BASE+0x20)
+#define GPIO0_RR2		(GPIO_BASE+0x24)
+#define GPIO0_RR3		(GPIO_BASE+0x28)
+#define GPIO0_ISR1L		(GPIO_BASE+0x30)
+#define GPIO0_ISR1H		(GPIO_BASE+0x34)
+#define GPIO0_ISR2L		(GPIO_BASE+0x38)
+#define GPIO0_ISR2H		(GPIO_BASE+0x3C)
+#define GPIO0_ISR3L		(GPIO_BASE+0x40)
+#define GPIO0_ISR3H		(GPIO_BASE+0x44)
+
+#define GPIO1_BASE  0xEF600800
+#define GPIO1_OR		(GPIO1_BASE+0x0)
+#define GPIO1_TCR		(GPIO1_BASE+0x4)
+#define GPIO1_OSRL		(GPIO1_BASE+0x8)
+#define GPIO1_OSRH		(GPIO1_BASE+0xC)
+#define GPIO1_TSRL		(GPIO1_BASE+0x10)
+#define GPIO1_TSRH		(GPIO1_BASE+0x14)
+#define GPIO1_ODR		(GPIO1_BASE+0x18)
+#define GPIO1_IR		(GPIO1_BASE+0x1C)
+#define GPIO1_RR1		(GPIO1_BASE+0x20)
+#define GPIO1_RR2		(GPIO1_BASE+0x24)
+#define GPIO1_RR3		(GPIO1_BASE+0x28)
+#define GPIO1_ISR1L		(GPIO1_BASE+0x30)
+#define GPIO1_ISR1H		(GPIO1_BASE+0x34)
+#define GPIO1_ISR2L		(GPIO1_BASE+0x38)
+#define GPIO1_ISR2H		(GPIO1_BASE+0x3C)
+#define GPIO1_ISR3L		(GPIO1_BASE+0x40)
+#define GPIO1_ISR3H		(GPIO1_BASE+0x44)
+
+#else	/* !405EZ */
+
 #define GPIO_BASE  0xEF600700
 #define GPIO0_OR               (GPIO_BASE+0x0)
 #define GPIO0_TCR              (GPIO_BASE+0x4)
@@ -660,6 +1199,7 @@
 #define GPIO0_ISR2H            (GPIO_BASE+0x38)
 #define GPIO0_ISR2L            (GPIO_BASE+0x3C)
 
+#endif /* CONFIG_405EZ */
 
 /*
  * Macro for accessing the indirect EBC register
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index 43c5ca4..3d8ca09 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -130,13 +130,13 @@ typedef struct emac_4xx_hw_st {
 
 
 #if defined(CONFIG_440GX)
-#define EMAC_NUM_DEV	    4
+#define EMAC_NUM_DEV		4
 #elif (defined(CONFIG_440) || defined(CONFIG_405EP)) &&	\
 	defined(CONFIG_NET_MULTI) &&			\
 	!defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
-#define EMAC_NUM_DEV	    2
+#define EMAC_NUM_DEV		2
 #else
-#define EMAC_NUM_DEV	    1
+#define EMAC_NUM_DEV		1
 #endif
 
 #ifdef CONFIG_IBM_EMAC4_V4	/* EMAC4 V4 changed bit setting */
@@ -153,16 +153,16 @@ typedef struct emac_4xx_hw_st {
 /*ZMII Bridge Register addresses */
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define ZMII_BASE			(CFG_PERIPHERAL_BASE + 0x0D00)
+#define ZMII_BASE		(CFG_PERIPHERAL_BASE + 0x0D00)
 #else
-#define ZMII_BASE			(CFG_PERIPHERAL_BASE + 0x0780)
+#define ZMII_BASE		(CFG_PERIPHERAL_BASE + 0x0780)
 #endif
-#define ZMII_FER			(ZMII_BASE)
-#define ZMII_SSR			(ZMII_BASE + 4)
-#define ZMII_SMIISR			(ZMII_BASE + 8)
+#define ZMII_FER		(ZMII_BASE)
+#define ZMII_SSR		(ZMII_BASE + 4)
+#define ZMII_SMIISR		(ZMII_BASE + 8)
 
-#define ZMII_RMII			0x22000000
-#define ZMII_MDI0			0x80000000
+#define ZMII_RMII		0x22000000
+#define ZMII_MDI0		0x80000000
 
 /* ZMII FER Register Bit Definitions */
 #define ZMII_FER_DIS		(0x0)
@@ -299,49 +299,41 @@ typedef struct emac_4xx_hw_st {
 #if defined(CONFIG_440)
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define EMAC_BASE			    (CFG_PERIPHERAL_BASE + 0x0E00)
+#define EMAC_BASE		(CFG_PERIPHERAL_BASE + 0x0E00)
 #else
-#define EMAC_BASE			    (CFG_PERIPHERAL_BASE + 0x0800)
+#define EMAC_BASE		(CFG_PERIPHERAL_BASE + 0x0800)
 #endif
 #else
-#define EMAC_BASE 			0xEF600800
+#if defined(CONFIG_405EZ)
+#define EMAC_BASE 		0xEF600900
+#else
+#define EMAC_BASE 		0xEF600800
+#endif
 #endif
 
-#define EMAC_M0				    (EMAC_BASE)
-#define EMAC_M1				    (EMAC_BASE + 4)
-#define EMAC_TXM0				(EMAC_BASE + 8)
-#define EMAC_TXM1				(EMAC_BASE + 12)
-#define EMAC_RXM				(EMAC_BASE + 16)
-#define EMAC_ISR				(EMAC_BASE + 20)
-#define EMAC_IER				(EMAC_BASE + 24)
-#define EMAC_IAH				(EMAC_BASE + 28)
-#define EMAC_IAL				(EMAC_BASE + 32)
-#define EMAC_VLAN_TPID_REG		(EMAC_BASE + 36)
-#define EMAC_VLAN_TCI_REG		(EMAC_BASE + 40)
+#define EMAC_M0			(EMAC_BASE)
+#define EMAC_M1			(EMAC_BASE + 4)
+#define EMAC_TXM0		(EMAC_BASE + 8)
+#define EMAC_TXM1		(EMAC_BASE + 12)
+#define EMAC_RXM		(EMAC_BASE + 16)
+#define EMAC_ISR		(EMAC_BASE + 20)
+#define EMAC_IER		(EMAC_BASE + 24)
+#define EMAC_IAH		(EMAC_BASE + 28)
+#define EMAC_IAL		(EMAC_BASE + 32)
 #define EMAC_PAUSE_TIME_REG	(EMAC_BASE + 44)
-#define EMAC_IND_HASH_1			(EMAC_BASE + 48)
-#define EMAC_IND_HASH_2			(EMAC_BASE + 52)
-#define EMAC_IND_HASH_3			(EMAC_BASE + 56)
-#define EMAC_IND_HASH_4			(EMAC_BASE + 60)
-#define EMAC_GRP_HASH_1			(EMAC_BASE + 64)
-#define EMAC_GRP_HASH_2			(EMAC_BASE + 68)
-#define EMAC_GRP_HASH_3			(EMAC_BASE + 72)
-#define EMAC_GRP_HASH_4			(EMAC_BASE + 76)
-#define EMAC_LST_SRC_LOW		(EMAC_BASE + 80)
-#define EMAC_LST_SRC_HI			(EMAC_BASE + 84)
 #define EMAC_I_FRAME_GAP_REG	(EMAC_BASE + 88)
-#define EMAC_STACR			    (EMAC_BASE + 92)
-#define EMAC_TRTR				(EMAC_BASE + 96)
-#define EMAC_RX_HI_LO_WMARK		(EMAC_BASE + 100)
+#define EMAC_STACR		(EMAC_BASE + 92)
+#define EMAC_TRTR		(EMAC_BASE + 96)
+#define EMAC_RX_HI_LO_WMARK	(EMAC_BASE + 100)
 
 /* bit definitions */
 /* MODE REG 0 */
-#define EMAC_M0_RXI			    (0x80000000)
-#define EMAC_M0_TXI			    (0x40000000)
-#define EMAC_M0_SRST			(0x20000000)
-#define EMAC_M0_TXE			    (0x10000000)
-#define EMAC_M0_RXE			    (0x08000000)
-#define EMAC_M0_WKE			    (0x04000000)
+#define EMAC_M0_RXI		(0x80000000)
+#define EMAC_M0_TXI		(0x40000000)
+#define EMAC_M0_SRST		(0x20000000)
+#define EMAC_M0_TXE		(0x10000000)
+#define EMAC_M0_RXE		(0x08000000)
+#define EMAC_M0_WKE		(0x04000000)
 
 /* on 440GX EMAC_MR1 has a different layout! */
 #if defined(CONFIG_440GX) || \
@@ -351,23 +343,23 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_M1_FDE		(0x80000000)
 #define EMAC_M1_ILE		(0x40000000)
 #define EMAC_M1_VLE		(0x20000000)
-#define EMAC_M1_EIFC			(0x10000000)
-#define EMAC_M1_APP			    (0x08000000)
-#define EMAC_M1_RSVD			(0x06000000)
-#define EMAC_M1_IST			    (0x01000000)
-#define EMAC_M1_MF_1000MBPS		(0x00800000)	/* 0's for 10MBPS */
-#define EMAC_M1_MF_100MBPS		(0x00400000)
-#define EMAC_M1_RFS_16K			(0x00280000)	/* ~4k for 512 byte */
-#define EMAC_M1_RFS_8K			(0x00200000)	/* ~4k for 512 byte */
-#define EMAC_M1_RFS_4K			(0x00180000)	/* ~4k for 512 byte */
-#define EMAC_M1_RFS_2K			(0x00100000)
-#define EMAC_M1_RFS_1K			(0x00080000)
-#define EMAC_M1_TX_FIFO_16K		(0x00050000)	/* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_8K		(0x00040000)
-#define EMAC_M1_TX_FIFO_4K		(0x00030000)
+#define EMAC_M1_EIFC		(0x10000000)
+#define EMAC_M1_APP		(0x08000000)
+#define EMAC_M1_RSVD		(0x06000000)
+#define EMAC_M1_IST		(0x01000000)
+#define EMAC_M1_MF_1000MBPS	(0x00800000)	/* 0's for 10MBPS */
+#define EMAC_M1_MF_100MBPS	(0x00400000)
+#define EMAC_M1_RFS_16K		(0x00280000)	/* ~4k for 512 byte */
+#define EMAC_M1_RFS_8K		(0x00200000)	/* ~4k for 512 byte */
+#define EMAC_M1_RFS_4K		(0x00180000)	/* ~4k for 512 byte */
+#define EMAC_M1_RFS_2K		(0x00100000)
+#define EMAC_M1_RFS_1K		(0x00080000)
+#define EMAC_M1_TX_FIFO_16K	(0x00050000)	/* 0's for 512 byte */
+#define EMAC_M1_TX_FIFO_8K	(0x00040000)
+#define EMAC_M1_TX_FIFO_4K	(0x00030000)
 #define EMAC_M1_TX_FIFO_2K	(0x00020000)
-#define EMAC_M1_TX_FIFO_1K		(0x00010000)
-#define EMAC_M1_TR_MULTI		(0x00008000)	/* 0'x for single packet */
+#define EMAC_M1_TX_FIFO_1K	(0x00010000)
+#define EMAC_M1_TR_MULTI	(0x00008000)	/* 0'x for single packet */
 #define EMAC_M1_MWSW		(0x00007000)
 #define EMAC_M1_JUMBO_ENABLE	(0x00000800)
 #define EMAC_M1_IPPA		(0x000007c0)
@@ -378,34 +370,34 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_M1_RSVD1		(0x00000007)
 #else /* defined(CONFIG_440GX) */
 /* EMAC_MR1 is the same on 405GP, 405GPr, 405EP, 440GP, 440EP */
-#define EMAC_M1_FDE			0x80000000
-#define EMAC_M1_ILE			0x40000000
-#define EMAC_M1_VLE			0x20000000
-#define EMAC_M1_EIFC			0x10000000
-#define EMAC_M1_APP			0x08000000
-#define EMAC_M1_AEMI			0x02000000
-#define EMAC_M1_IST			0x01000000
-#define EMAC_M1_MF_1000MBPS		0x00800000	/* 0's for 10MBPS */
-#define EMAC_M1_MF_100MBPS		0x00400000
-#define EMAC_M1_RFS_4K			0x00300000	/* ~4k for 512 byte */
-#define EMAC_M1_RFS_2K			0x00200000
-#define EMAC_M1_RFS_1K			0x00100000
-#define EMAC_M1_TX_FIFO_2K		0x00080000	/* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_1K		0x00040000
-#define EMAC_M1_TR0_DEPEND		0x00010000	/* 0'x for single packet */
-#define EMAC_M1_TR0_MULTI		0x00008000
-#define EMAC_M1_TR1_DEPEND		0x00004000
-#define EMAC_M1_TR1_MULTI		0x00002000
+#define EMAC_M1_FDE		0x80000000
+#define EMAC_M1_ILE		0x40000000
+#define EMAC_M1_VLE		0x20000000
+#define EMAC_M1_EIFC		0x10000000
+#define EMAC_M1_APP		0x08000000
+#define EMAC_M1_AEMI		0x02000000
+#define EMAC_M1_IST		0x01000000
+#define EMAC_M1_MF_1000MBPS	0x00800000	/* 0's for 10MBPS */
+#define EMAC_M1_MF_100MBPS	0x00400000
+#define EMAC_M1_RFS_4K		0x00300000	/* ~4k for 512 byte */
+#define EMAC_M1_RFS_2K		0x00200000
+#define EMAC_M1_RFS_1K		0x00100000
+#define EMAC_M1_TX_FIFO_2K	0x00080000	/* 0's for 512 byte */
+#define EMAC_M1_TX_FIFO_1K	0x00040000
+#define EMAC_M1_TR0_DEPEND	0x00010000	/* 0'x for single packet */
+#define EMAC_M1_TR0_MULTI	0x00008000
+#define EMAC_M1_TR1_DEPEND	0x00004000
+#define EMAC_M1_TR1_MULTI	0x00002000
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define EMAC_M1_JUMBO_ENABLE		0x00001000
+#define EMAC_M1_JUMBO_ENABLE	0x00001000
 #endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
 #endif /* defined(CONFIG_440GX) */
 
 /* Transmit Mode Register 0 */
-#define EMAC_TXM0_GNP0			(0x80000000)
-#define EMAC_TXM0_GNP1			(0x40000000)
-#define EMAC_TXM0_GNPD			(0x20000000)
-#define EMAC_TXM0_FC			(0x10000000)
+#define EMAC_TXM0_GNP0		(0x80000000)
+#define EMAC_TXM0_GNP1		(0x40000000)
+#define EMAC_TXM0_GNPD		(0x20000000)
+#define EMAC_TXM0_FC		(0x10000000)
 
 /* Receive Mode Register */
 #define EMAC_RMR_SP		(0x80000000)
@@ -427,39 +419,38 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_ISR_PP		(0x01000000)
 #define EMAC_ISR_BP		(0x00800000)
 #define EMAC_ISR_RP		(0x00400000)
-#define EMAC_ISR_SE			(0x00200000)
-#define EMAC_ISR_SYE			(0x00100000)
-#define EMAC_ISR_BFCS			(0x00080000)
-#define EMAC_ISR_PTLE			(0x00040000)
-#define EMAC_ISR_ORE			(0x00020000)
-#define EMAC_ISR_IRE			(0x00010000)
-#define EMAC_ISR_DBDM			(0x00000200)
-#define EMAC_ISR_DB0			(0x00000100)
-#define EMAC_ISR_SE0			(0x00000080)
-#define EMAC_ISR_TE0			(0x00000040)
-#define EMAC_ISR_DB1			(0x00000020)
-#define EMAC_ISR_SE1			(0x00000010)
-#define EMAC_ISR_TE1			(0x00000008)
-#define EMAC_ISR_MOS			(0x00000002)
-#define EMAC_ISR_MOF			(0x00000001)
-
+#define EMAC_ISR_SE		(0x00200000)
+#define EMAC_ISR_SYE		(0x00100000)
+#define EMAC_ISR_BFCS		(0x00080000)
+#define EMAC_ISR_PTLE		(0x00040000)
+#define EMAC_ISR_ORE		(0x00020000)
+#define EMAC_ISR_IRE		(0x00010000)
+#define EMAC_ISR_DBDM		(0x00000200)
+#define EMAC_ISR_DB0		(0x00000100)
+#define EMAC_ISR_SE0		(0x00000080)
+#define EMAC_ISR_TE0		(0x00000040)
+#define EMAC_ISR_DB1		(0x00000020)
+#define EMAC_ISR_SE1		(0x00000010)
+#define EMAC_ISR_TE1		(0x00000008)
+#define EMAC_ISR_MOS		(0x00000002)
+#define EMAC_ISR_MOF		(0x00000001)
 
 /* STA CONTROL REG */
-#define EMAC_STACR_OC			(0x00008000)
-#define EMAC_STACR_PHYE			(0x00004000)
+#define EMAC_STACR_OC		(0x00008000)
+#define EMAC_STACR_PHYE		(0x00004000)
 
 #ifdef CONFIG_IBM_EMAC4_V4	/* EMAC4 V4 changed bit setting */
-#define EMAC_STACR_INDIRECT_MODE	(0x00002000)
-#define EMAC_STACR_WRITE		(0x00000800) /* $BUC */
-#define EMAC_STACR_READ			(0x00001000) /* $BUC */
-#define EMAC_STACR_OP_MASK		(0x00001800)
-#define EMAC_STACR_MDIO_ADDR		(0x00000000)
-#define EMAC_STACR_MDIO_WRITE		(0x00000800)
-#define EMAC_STACR_MDIO_READ		(0x00001800)
-#define EMAC_STACR_MDIO_READ_INC	(0x00001000)
+#define EMAC_STACR_INDIRECT_MODE (0x00002000)
+#define EMAC_STACR_WRITE	(0x00000800) /* $BUC */
+#define EMAC_STACR_READ		(0x00001000) /* $BUC */
+#define EMAC_STACR_OP_MASK	(0x00001800)
+#define EMAC_STACR_MDIO_ADDR	(0x00000000)
+#define EMAC_STACR_MDIO_WRITE	(0x00000800)
+#define EMAC_STACR_MDIO_READ	(0x00001800)
+#define EMAC_STACR_MDIO_READ_INC (0x00001000)
 #else
-#define EMAC_STACR_WRITE		(0x00002000)
-#define EMAC_STACR_READ			(0x00001000)
+#define EMAC_STACR_WRITE	(0x00002000)
+#define EMAC_STACR_READ		(0x00001000)
 #endif
 
 #define EMAC_STACR_CLK_83MHZ	(0x00000800)  /* 0's for 50Mhz */
@@ -467,9 +458,9 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_STACR_CLK_100MHZ	(0x00000C00)
 
 /* Transmit Request Threshold Register */
-#define EMAC_TRTR_256			(0x18000000)   /* 0's for 64 Bytes */
-#define EMAC_TRTR_192			(0x10000000)
-#define EMAC_TRTR_128			(0x01000000)
+#define EMAC_TRTR_256		(0x18000000)   /* 0's for 64 Bytes */
+#define EMAC_TRTR_192		(0x10000000)
+#define EMAC_TRTR_128		(0x01000000)
 
 /* the follwing defines are for the MadMAL status and control registers. */
 /* For bits 0..5 look at the mal.h file					 */