Merge branch 'master' of git://git.denx.de/u-boot into resolve

Conflicts:
	README
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h

382 files changed, 23889 insertions, 2516 deletions

diff --git a/.gitignore b/.gitignore
index 1ac43f2..a163728 100644
--- a/.gitignore
+++ b/.gitignore
@@ -38,12 +38,12 @@
 /u-boot.sha1
 /u-boot.dis
 /u-boot.lds
-/u-boot.lst
 /u-boot.ubl
 /u-boot.ais
 /u-boot.dtb
 /u-boot.sb
 /u-boot.geany
+/include/u-boot.lst
 
 #
 # Generated files
diff --git a/MAINTAINERS b/MAINTAINERS
index e34d9f3..36b47b7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7,6 +7,10 @@
 # and Cc: the <u-boot@lists.denx.de> mailing list.			#
 #									#
 # Note: lists sorted by Maintainer Name					#
+# Note: These are the maintainers for specific *boards*.  The		#
+#	custodians for general architectures and subsystems can		#
+#	be found here -- http://www.denx.de/wiki/U-Boot/Custodians	#
+#									#
 #########################################################################
 
 
@@ -388,6 +392,8 @@ Ricardo Ribalda <ricardo.ribalda@uam.es>
 
 Stefan Roese <sr@denx.de>
 
+	a3m071		MPC5200
+
 	P3M7448		MPC7448
 
 	uc100		MPC857
@@ -800,7 +806,7 @@ Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
 
 	apx4devkit	i.MX28
 
-Luka Perkov <uboot@lukaperkov.net>
+Luka Perkov <luka@openwrt.org>
 
 	ib62x0		ARM926EJS
 	iconnect	ARM926EJS
diff --git a/MAKEALL b/MAKEALL
index 84a5c92..5b06c54 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -20,6 +20,8 @@ usage()
 	  -m,        --maintainers     List all targets and maintainer email
 	  -M,        --mails           List all targets and all affilated emails
 	  -C,        --check           Enable build checking
+	  -n,        --continue        Continue (skip boards already built)
+	  -r,        --rebuild-errors  Rebuild any boards that errored
 	  -h,        --help            This help output
 
 	Selections by these options are logically ANDed; if the same option
@@ -52,8 +54,8 @@ usage()
 	exit ${ret}
 }
 
-SHORT_OPTS="ha:c:v:s:lmMC"
-LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails,check"
+SHORT_OPTS="ha:c:v:s:lmMCnr"
+LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails,check,continue,rebuild-errors"
 
 # Option processing based on util-linux-2.13/getopt-parse.bash
 
@@ -73,6 +75,8 @@ SELECTED=''
 ONLY_LIST=''
 PRINT_MAINTS=''
 MAINTAINERS_ONLY=''
+CONTINUE=''
+REBUILD_ERRORS=''
 
 while true ; do
 	case "$1" in
@@ -115,6 +119,12 @@ while true ; do
 	-C|--check)
 		CHECK='C=1'
 		shift ;;
+	-n|--continue)
+		CONTINUE='y'
+		shift ;;
+	-r|--rebuild-errors)
+		REBUILD_ERRORS='y'
+		shift ;;
 	-l|--list)
 		ONLY_LIST='y'
 		shift ;;
@@ -198,7 +208,9 @@ fi
 OUTPUT_PREFIX="${BUILD_DIR}"
 
 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
-find "${LOG_DIR}/" -type f -exec rm -f {} +
+if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
+	find "${LOG_DIR}/" -type f -exec rm -f {} +
+fi
 
 LIST=""
 
@@ -208,6 +220,7 @@ ERR_LIST=""
 WRN_CNT=0
 WRN_LIST=""
 TOTAL_CNT=0
+SKIP_CNT=0
 CURRENT_CNT=0
 OLDEST_IDX=1
 RC=0
@@ -381,6 +394,12 @@ LIST_pxa="$(boards_by_cpu pxa)"
 LIST_ixp="$(boards_by_cpu ixp)"
 
 #########################################################################
+## SPEAr Systems
+#########################################################################
+
+LIST_spear="$(boards_by_soc spear)"
+
+#########################################################################
 ## ARM groups
 #########################################################################
 
@@ -610,6 +629,13 @@ list_target() {
 donep="${LOG_DIR}/._done_"
 skipp="${LOG_DIR}/._skip_"
 
+build_target_killed() {
+	echo "Aborted $target build."
+	# Remove the logs for this board since it was aborted
+	rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
+	exit
+}
+
 build_target() {
 	target=$1
 	build_idx=$2
@@ -622,6 +648,7 @@ build_target() {
 	if [ $BUILD_MANY == 1 ] ; then
 		output_dir="${OUTPUT_PREFIX}/${target}"
 		mkdir -p "${output_dir}"
+		trap build_target_killed TERM
 	else
 		output_dir="${OUTPUT_PREFIX}"
 	fi
@@ -640,6 +667,8 @@ build_target() {
 	fi
 
 	if [ $BUILD_MANY == 1 ] ; then
+		trap - TERM
+
 		${MAKE} -s tidy
 
 		if [ -s ${LOG_DIR}/${target}.ERR ] ; then
@@ -718,10 +747,20 @@ build_targets() {
 			: $((CURRENT_CNT += 1))
 			rm -f "${donep}${TOTAL_CNT}"
 			rm -f "${skipp}${TOTAL_CNT}"
-			if [ $BUILD_MANY == 1 ] ; then
-				build_target ${t} ${TOTAL_CNT} &
+			if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
+				: $((SKIP_CNT += 1))
+				touch "${donep}${TOTAL_CNT}"
+			elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
+				: $((SKIP_CNT += 1))
+				touch "${donep}${TOTAL_CNT}"
 			else
-				build_target ${t} ${TOTAL_CNT}
+				if [ $BUILD_MANY == 1 ] ; then
+					build_target ${t} ${TOTAL_CNT} &
+				else
+					CUR_TGT="${t}"
+					build_target ${t} ${TOTAL_CNT}
+					CUR_TGT=''
+				fi
 			fi
 		fi
 
@@ -745,7 +784,11 @@ build_targets() {
 #-----------------------------------------------------------------------
 
 kill_children() {
-	kill -- "-$1"
+	local pgid=`ps -p $$ --no-headers -o "%r" | tr -d ' '`
+	local children=`pgrep -g $pgid | grep -v $$ | grep -v $pgid`
+
+	kill $children 2> /dev/null
+	wait $children 2> /dev/null
 
 	exit
 }
@@ -753,6 +796,9 @@ kill_children() {
 print_stats() {
 	if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 
+	# Only count boards that completed
+	: $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
+
 	rm -f ${donep}* ${skipp}*
 
 	if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
@@ -762,10 +808,17 @@ print_stats() {
 		WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
 		WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
 		WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
+	else
+		# Remove the logs for any board that was interrupted
+		rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
 	fi
 
+	: $((TOTAL_CNT -= ${SKIP_CNT}))
 	echo ""
 	echo "--------------------- SUMMARY ----------------------------"
+	if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
+		echo "Boards skipped: ${SKIP_CNT}"
+	fi
 	echo "Boards compiled: ${TOTAL_CNT}"
 	if [ ${ERR_CNT} -gt 0 ] ; then
 		echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
@@ -776,7 +829,7 @@ print_stats() {
 	echo "----------------------------------------------------------"
 
 	if [ $BUILD_MANY == 1 ] ; then
-		kill_children $$ &
+		kill_children
 	fi
 
 	exit $RC
diff --git a/Makefile b/Makefile
index 8a04727..44db889 100644
--- a/Makefile
+++ b/Makefile
@@ -231,8 +231,8 @@ endif
 
 OBJS  = $(CPUDIR)/start.o
 ifeq ($(CPU),x86)
-OBJS += $(CPUDIR)/start16.o
-OBJS += $(CPUDIR)/resetvec.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/start16.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/resetvec.o
 endif
 ifeq ($(CPU),ppc4xx)
 OBJS += $(CPUDIR)/resetvec.o
@@ -241,7 +241,7 @@ ifeq ($(CPU),mpc85xx)
 OBJS += $(CPUDIR)/resetvec.o
 endif
 
-OBJS := $(addprefix $(obj),$(OBJS))
+OBJS := $(addprefix $(obj),$(OBJS) $(RESET_OBJS-))
 
 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
 
@@ -293,7 +293,10 @@ LIBS-y += drivers/net/libnet.o
 LIBS-y += drivers/net/phy/libphy.o
 LIBS-y += drivers/pci/libpci.o
 LIBS-y += drivers/pcmcia/libpcmcia.o
-LIBS-y += drivers/power/libpower.o
+LIBS-y += drivers/power/libpower.o \
+	drivers/power/fuel_gauge/libfuel_gauge.o \
+	drivers/power/pmic/libpmic.o \
+	drivers/power/battery/libbattery.o
 LIBS-y += drivers/spi/libspi.o
 LIBS-y += drivers/dfu/libdfu.o
 ifeq ($(CPU),mpc83xx)
@@ -320,6 +323,7 @@ LIBS-y += drivers/usb/eth/libusb_eth.o
 LIBS-y += drivers/usb/gadget/libusb_gadget.o
 LIBS-y += drivers/usb/host/libusb_host.o
 LIBS-y += drivers/usb/musb/libusb_musb.o
+LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
 LIBS-y += drivers/usb/phy/libusb_phy.o
 LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
 LIBS-y += drivers/video/libvideo.o
@@ -387,12 +391,12 @@ __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
 BOARD_SIZE_CHECK = \
 	@actual=`wc -c $@ | awk '{print $$1}'`; \
-	limit=$(CONFIG_BOARD_SIZE_LIMIT); \
+	limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
 	if test $$actual -gt $$limit; then \
-		echo "$@ exceeds file size limit:"; \
-		echo "  limit:  $$limit bytes"; \
-		echo "  actual: $$actual bytes"; \
-		echo "  excess: $$((actual - limit)) bytes"; \
+		echo "$@ exceeds file size limit:" >&2 ; \
+		echo "  limit:  $$limit bytes" >&2 ; \
+		echo "  actual: $$actual bytes" >&2 ; \
+		echo "  excess: $$((actual - limit)) bytes" >&2; \
 		exit 1; \
 	fi
 else
@@ -405,6 +409,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
 ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
 ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
 
 # enable combined SPL/u-boot/dtb rules for tegra
@@ -446,9 +451,18 @@ $(obj)u-boot.ldr.hex:	$(obj)u-boot.ldr
 $(obj)u-boot.ldr.srec:	$(obj)u-boot.ldr
 		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := 0
+endif
+
 $(obj)u-boot.img:	$(obj)u-boot.bin
 		$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
+		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
+		-e $(CONFIG_SYS_UBOOT_START) \
 		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
 		-d $< $@
@@ -472,14 +486,15 @@ $(obj)u-boot.sha1:	$(obj)u-boot.bin
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
 
-$(obj)u-boot.ubl:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
 		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin
-		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
-		-e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl
-		rm $(obj)u-boot-ubl.bin
+		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
 		rm $(obj)spl/u-boot-spl-pad.bin
 
+$(obj)u-boot.ubl:       $(obj)u-boot-with-spl.bin
+		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
+		-e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
+
 $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
 		$(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \
 			-T aisimage \
@@ -530,6 +545,9 @@ $(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtb
 		rm $(obj)spl/u-boot-spl-pad.bin
 endif
 
+$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+		cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \
 		cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
@@ -639,6 +657,16 @@ checkthumb:
 		echo '*** Your board is configured for THUMB mode.'; \
 		false; \
 	fi
+
+# GCC 3.x is reported to have problems generating the type of relocation
+# that U-Boot wants.
+# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
+checkgcc4:
+	@if test $(call cc-version) -lt 0400; then \
+		echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
+		false; \
+	fi
+
 #
 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 #
@@ -812,7 +840,7 @@ clean:
 	@rm -f $(obj)include/generated/asm-offsets.h
 	@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
 	@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
-	@$(MAKE) -C doc/DocBook/ cleandocs
+	@$(MAKE) -s -C doc/DocBook/ cleandocs
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
 		-o -name '*.o'	-o -name '*.a' -o -name '*.exe'	\) -print \
diff --git a/README b/README
index 037513a..5a86ae9 100644
--- a/README
+++ b/README
@@ -54,6 +54,11 @@ In case of problems see the CHANGELOG and CREDITS files to find out
 who contributed the specific port. The MAINTAINERS file lists board
 maintainers.
 
+Note: There is no CHANGELOG file in the actual U-Boot source tree;
+it can be created dynamically from the Git log using:
+
+	make CHANGELOG
+
 
 Where to get help:
 ==================
@@ -1409,6 +1414,13 @@ CBFS (Coreboot Filesystem) support
 		boot.  See the documentation file README.video for a
 		description of this variable.
 
+		CONFIG_VIDEO_VGA
+
+		Enable the VGA video / BIOS for x86. The alternative if you
+		are using coreboot is to use the coreboot frame buffer
+		driver.
+
+
 - Keyboard Support:
 		CONFIG_KEYBOARD
 
@@ -1469,21 +1481,10 @@ CBFS (Coreboot Filesystem) support
 		Normally display is black on white background; define
 		CONFIG_SYS_WHITE_ON_BLACK to get it inverted.
 
+		CONFIG_LCD_BMP_RLE8
 
-		CONFIG_LCD_ALIGNMENT
-
-		Normally the LCD is page-aligned (tyically 4KB). If this is
-		defined then the LCD will be aligned to this value instead.
-		For ARM it is sometimes useful to use MMU_SECTION_SIZE
-		here, since it is cheaper to change data cache settings on
-		a per-section basis.
+		Support drawing of RLE8-compressed bitmaps on the LCD.
 
-		CONFIG_CONSOLE_SCROLL_LINES
-
-		When the console need to be scrolled, this is the number of
-		lines to scroll by. It defaults to 1. Increasing this makes
-		the console jump but can help speed up operation when scrolling
-		is slow.
 
 - Splash Screen Support: CONFIG_SPLASH_SCREEN
 
@@ -2211,6 +2212,14 @@ CBFS (Coreboot Filesystem) support
 			HERMES, IP860, RPXlite, LWMON,
 			FLAGADM, TQM8260
 
+- Access to physical memory region (> 4GB)
+		Some basic support is provided for operations on memory not
+		normally accessible to U-Boot - e.g. some architectures
+		support access to more than 4GB of memory on 32-bit
+		machines using physical address extension or similar.
+		Define CONFIG_PHYSMEM to access this basic support, which
+		currently only supports clearing the memory.
+
 - Error Recovery:
 		CONFIG_PANIC_HANG
 
@@ -2613,6 +2622,17 @@ FIT uImage format:
  -150	common/cmd_nand.c	Incorrect FIT image format
   151	common/cmd_nand.c	FIT image format OK
 
+- FIT image support:
+		CONFIG_FIT
+		Enable support for the FIT uImage format.
+
+		CONFIG_FIT_BEST_MATCH
+		When no configuration is explicitly selected, default to the
+		one whose fdt's compatibility field best matches that of
+		U-Boot itself. A match is considered "best" if it matches the
+		most specific compatibility entry of U-Boot's fdt's root node.
+		The order of entries in the configuration's fdt is ignored.
+
 - Standalone program support:
 		CONFIG_STANDALONE_LOAD_ADDR
 
@@ -2664,6 +2684,10 @@ FIT uImage format:
 		CONFIG_SPL_TEXT_BASE
 		TEXT_BASE for linking the SPL binary.
 
+		CONFIG_SPL_RELOC_TEXT_BASE
+		Address to relocate to.  If unspecified, this is equal to
+		CONFIG_SPL_TEXT_BASE (i.e. no relocation is done).
+
 		CONFIG_SPL_BSS_START_ADDR
 		Link address for the BSS within the SPL binary.
 
@@ -2673,6 +2697,11 @@ FIT uImage format:
 		CONFIG_SPL_STACK
 		Adress of the start of the stack SPL will use
 
+		CONFIG_SPL_RELOC_STACK
+		Adress of the start of the stack SPL will use after
+		relocation.  If unspecified, this is equal to
+		CONFIG_SPL_STACK.
+
 		CONFIG_SYS_SPL_MALLOC_START
 		Starting address of the malloc pool used in SPL.
 
@@ -2688,6 +2717,9 @@ FIT uImage format:
 		For ARM, enable an optional function to print more information
 		about the running system.
 
+		CONFIG_SPL_INIT_MINIMAL
+		Arch init code should be built for a very small image
+
 		CONFIG_SPL_LIBCOMMON_SUPPORT
 		Support for common/libcommon.o in SPL binary
 
@@ -2715,8 +2747,19 @@ FIT uImage format:
 		CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME
 		Filename to read to load U-Boot when reading from FAT
 
+		CONFIG_SPL_NAND_BASE
+		Include nand_base.c in the SPL.  Requires
+		CONFIG_SPL_NAND_DRIVERS.
+
+		CONFIG_SPL_NAND_DRIVERS
+		SPL uses normal NAND drivers, not minimal drivers.
+
+		CONFIG_SPL_NAND_ECC
+		Include standard software ECC in the SPL
+
 		CONFIG_SPL_NAND_SIMPLE
-		Support for drivers/mtd/nand/libnand.o in SPL binary
+		Support for NAND boot using simple NAND drivers that
+		expose the cmd_ctrl() interface.
 
 		CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT,
 		CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE,
@@ -2724,15 +2767,19 @@ FIT uImage format:
 		CONFIG_SYS_NAND_ECCPOS, CONFIG_SYS_NAND_ECCSIZE,
 		CONFIG_SYS_NAND_ECCBYTES
 		Defines the size and behavior of the NAND that SPL uses
-		to read U-Boot with CONFIG_SPL_NAND_SIMPLE
+		to read U-Boot
 
 		CONFIG_SYS_NAND_U_BOOT_OFFS
-		Location in NAND for CONFIG_SPL_NAND_SIMPLE to read U-Boot
-		from.
+		Location in NAND to read U-Boot from
+
+		CONFIG_SYS_NAND_U_BOOT_DST
+		Location in memory to load U-Boot to
+
+		CONFIG_SYS_NAND_U_BOOT_SIZE
+		Size of image to load
 
 		CONFIG_SYS_NAND_U_BOOT_START
-		Location in memory for CONFIG_SPL_NAND_SIMPLE to load U-Boot
-		to.
+		Entry point in loaded image to jump to
 
 		CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 		Define this if you need to first read the OOB and then the
@@ -2757,6 +2804,11 @@ FIT uImage format:
 		CONFIG_SPL_LIBGENERIC_SUPPORT
 		Support for lib/libgeneric.o in SPL binary
 
+		CONFIG_SPL_TARGET
+		Final target image containing SPL and payload.  Some SPLs
+		use an arch-specific makefile fragment instead, for
+		example if more than one image needs to be produced.
+
 Modem Support:
 --------------
 
@@ -3632,6 +3684,16 @@ Low Level (hardware related) configuration options:
 		be used if available. These functions may be faster under some
 		conditions but may increase the binary size.
 
+- CONFIG_X86_NO_RESET_VECTOR
+		If defined, the x86 reset vector code is excluded. You will need
+		to do this when U-Boot is running from Coreboot.
+
+- CONFIG_X86_NO_REAL_MODE
+		If defined, x86 real mode code is omitted. This assumes a
+		32-bit environment where such code is not needed. You will
+		need to do this when U-Boot is running from Coreboot.
+
+
 Freescale QE/FMAN Firmware Support:
 -----------------------------------
 
@@ -3859,6 +3921,7 @@ saveenv - save environment variables to persistent storage
 protect - enable or disable FLASH write protection
 erase	- erase FLASH memory
 flinfo	- print FLASH memory information
+nand	- NAND memory operations (see doc/README.nand)
 bdinfo	- print Board Info structure
 iminfo	- print header information for application image
 coninfo - print console devices and informations
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index e4c123c..da5bc73 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -33,6 +33,11 @@
 #include <i2c.h>
 #include <miiphy.h>
 #include <cpsw.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+#include <asm/omap_musb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -63,3 +68,83 @@ void setup_clocks_for_console(void)
 	/* Not yet implemented */
 	return;
 }
+
+/* AM33XX has two MUSB controllers which can be host or gadget */
+#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
+	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* USB 2.0 PHY Control */
+#define CM_PHY_PWRDN			(1 << 0)
+#define CM_PHY_OTG_PWRDN		(1 << 1)
+#define OTGVDET_EN			(1 << 19)
+#define OTGSESSENDEN			(1 << 20)
+
+static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
+{
+	if (on) {
+		clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
+				OTGVDET_EN | OTGSESSENDEN);
+	} else {
+		clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
+	}
+}
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 16,
+	.ram_bits       = 12,
+};
+
+#ifdef CONFIG_AM335X_USB0
+static void am33xx_otg0_set_phy_power(u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
+}
+
+struct omap_musb_board_data otg0_board_data = {
+	.set_phy_power = am33xx_otg0_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg0_plat = {
+	.mode           = CONFIG_AM335X_USB0_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg0_board_data,
+};
+#endif
+
+#ifdef CONFIG_AM335X_USB1
+static void am33xx_otg1_set_phy_power(u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
+}
+
+struct omap_musb_board_data otg1_board_data = {
+	.set_phy_power = am33xx_otg1_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg1_plat = {
+	.mode           = CONFIG_AM335X_USB1_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg1_board_data,
+};
+#endif
+#endif
+
+int arch_misc_init(void)
+{
+#ifdef CONFIG_AM335X_USB0
+	musb_register(&otg0_plat, &otg0_board_data,
+		(void *)AM335X_USB0_OTG_BASE);
+#endif
+#ifdef CONFIG_AM335X_USB1
+	musb_register(&otg1_plat, &otg1_board_data,
+		(void *)AM335X_USB1_OTG_BASE);
+#endif
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index bc2abb6..0b4cb4e 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -40,6 +40,7 @@
 #define CLK_MODE_MASK		0xfffffff8
 #define CLK_DIV_SEL		0xFFFFFFE0
 #define CPGMAC0_IDLE		0x30000
+#define DPLL_CLKDCOLDO_GATE_CTRL        0x300
 
 const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
 const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
@@ -194,6 +195,11 @@ static void enable_per_clocks(void)
 	writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
 	while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
 		;
+
+	/* MUSB */
+	writel(PRCM_MOD_EN, &cmper->usb0clkctrl);
+	while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN)
+		;
 }
 
 static void mpu_pll_config(void)
@@ -290,6 +296,8 @@ static void per_pll_config(void)
 
 	while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK)
 		;
+
+	writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper);
 }
 
 void ddr_pll_config(unsigned int ddrpll_m)
diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile
index ac597be..de167ee 100644
--- a/arch/arm/cpu/armv7/omap3/Makefile
+++ b/arch/arm/cpu/armv7/omap3/Makefile
@@ -38,6 +38,7 @@ endif
 COBJS-$(CONFIG_DRIVER_TI_EMAC)	+= emac.o
 COBJS-$(CONFIG_EMIF4)	+= emif4.o
 COBJS-$(CONFIG_SDRC)	+= sdrc.o
+COBJS-$(CONFIG_USB_MUSB_AM35X)	+= am35x_musb.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap3/am35x_musb.c b/arch/arm/cpu/armv7/omap3/am35x_musb.c
new file mode 100644
index 0000000..7183c4f
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap3/am35x_musb.c
@@ -0,0 +1,75 @@
+/*
+ * This file configures the internal USB PHY in AM35X.
+ *
+ * Copyright (C) 2012 Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * Based on omap_phy_internal.c code from Linux by
+ * Hema HK <hemahk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/am35x_def.h>
+
+void am35x_musb_reset(void)
+{
+	/* Reset the musb interface */
+	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+			0, USBOTGSS_SW_RST);
+	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+			USBOTGSS_SW_RST, 0);
+}
+
+void am35x_musb_phy_power(u8 on)
+{
+	unsigned long start = get_timer(0);
+
+	if (on) {
+		/*
+		 * Start the on-chip PHY and its PLL.
+		 */
+		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+				CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN,
+				CONF2_PHY_PLLON);
+
+		debug("Waiting for PHY clock good...\n");
+		while (!(readl(&am35x_scm_general_regs->devconf2)
+				& CONF2_PHYCLKGD)) {
+
+			if (get_timer(start) > CONFIG_SYS_HZ / 10) {
+				printf("musb PHY clock good timed out\n");
+				break;
+			}
+		}
+	} else {
+		/*
+		 * Power down the on-chip PHY.
+		 */
+		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+				CONF2_PHY_PLLON,
+				CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+	}
+}
+
+void am35x_musb_clear_irq(void)
+{
+	clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr,
+			0, USBOTGSS_INT_CLR);
+	readl(&am35x_scm_general_regs->lvl_intr_clr);
+}
+
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 819fd2f..d6c038e 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -82,7 +82,8 @@ struct cm_wkuppll {
 	unsigned int clkseldpllcore;	/* offset 0x68 */
 	unsigned int resv9[1];
 	unsigned int idlestdpllper;	/* offset 0x70 */
-	unsigned int resv10[3];
+	unsigned int resv10[2];
+	unsigned int clkdcoldodpllper;	/* offset 0x7c */
 	unsigned int divm4dpllcore;	/* offset 0x80 */
 	unsigned int divm5dpllcore;	/* offset 0x84 */
 	unsigned int clkmoddpllmpu;	/* offset 0x88 */
@@ -275,12 +276,16 @@ struct ctrl_stat {
 /* Control Device Register */
 struct ctrl_dev {
 	unsigned int deviceid;		/* offset 0x00 */
-	unsigned int resv1[11];
+	unsigned int resv1[7];
+	unsigned int usb_ctrl0;		/* offset 0x20 */
+	unsigned int resv2;
+	unsigned int usb_ctrl1;		/* offset 0x28 */
+	unsigned int resv3;
 	unsigned int macid0l;		/* offset 0x30 */
 	unsigned int macid0h;		/* offset 0x34 */
 	unsigned int macid1l;		/* offset 0x38 */
 	unsigned int macid1h;		/* offset 0x3c */
-	unsigned int resv2[4];
+	unsigned int resv4[4];
 	unsigned int miisel;		/* offset 0x50 */
 };
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h
index 5bd4bc8..24ab365 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware.h
@@ -87,4 +87,8 @@
 /* RTC base address */
 #define AM335X_RTC_BASE			0x44E3E000
 
+/* OTG */
+#define AM335X_USB0_OTG_BASE		0x47401000
+#define AM335X_USB1_OTG_BASE		0x47401800
+
 #endif /* __AM33XX_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h
new file mode 100644
index 0000000..8acdf9b
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/dwmmc.h
@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define DWMCI_CLKSEL		0x09C
+#define DWMCI_SHIFT_0		0x0
+#define DWMCI_SHIFT_1		0x1
+#define DWMCI_SHIFT_2		0x2
+#define DWMCI_SHIFT_3		0x3
+#define DWMCI_SET_SAMPLE_CLK(x)	(x)
+#define DWMCI_SET_DRV_CLK(x)	((x) << 16)
+#define DWMCI_SET_DIV_RATIO(x)	((x) << 24)
+
+int exynos_dwmci_init(u32 regbase, int bus_width, int index);
+
+static inline unsigned int exynos_dwmmc_init(int index, int bus_width)
+{
+	unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
+	return exynos_dwmci_init(base, bus_width, index);
+}
diff --git a/arch/arm/include/asm/arch-omap3/am35x_def.h b/arch/arm/include/asm/arch-omap3/am35x_def.h
index bbaf1bc..67698bc 100644
--- a/arch/arm/include/asm/arch-omap3/am35x_def.h
+++ b/arch/arm/include/asm/arch-omap3/am35x_def.h
@@ -32,9 +32,34 @@
 #ifndef __KERNEL_STRICT_NAMES
 #ifndef __ASSEMBLY__
 
+/* LVL_INTR_CLEAR bits */
+#define USBOTGSS_INT_CLR	(1 << 4)
+
 /* IP_SW_RESET bits */
+#define USBOTGSS_SW_RST		(1 << 0)	/* reset USBOTG */
 #define CPGMACSS_SW_RST		(1 << 1)	/* reset CPGMAC */
 
+/* DEVCONF2 bits */
+#define CONF2_PHY_GPIOMODE	(1 << 23)
+#define CONF2_OTGMODE		(3 << 14)
+#define CONF2_NO_OVERRIDE	(0 << 14)
+#define CONF2_FORCE_HOST	(1 << 14)
+#define CONF2_FORCE_DEVICE	(2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN		(1 << 13)
+#define CONF2_VBDTCTEN		(1 << 12)
+#define CONF2_REFFREQ_24MHZ	(2 << 8)
+#define CONF2_REFFREQ_26MHZ	(7 << 8)
+#define CONF2_REFFREQ_13MHZ	(6 << 8)
+#define CONF2_REFFREQ		(0xf << 8)
+#define CONF2_PHYCLKGD		(1 << 7)
+#define CONF2_VBUSSENSE		(1 << 6)
+#define CONF2_PHY_PLLON		(1 << 5)
+#define CONF2_RESET		(1 << 4)
+#define CONF2_PHYPWRDN		(1 << 3)
+#define CONF2_OTGPWRDN		(1 << 2)
+#define CONF2_DATPOL		(1 << 1)
+
 /* General register mappings of system control module */
 #define AM35X_SCM_GEN_BASE	0x48002270
 struct am35x_scm_general {
@@ -49,6 +74,8 @@ struct am35x_scm_general {
 };
 #define am35x_scm_general_regs ((struct am35x_scm_general *)AM35X_SCM_GEN_BASE)
 
+#define AM35XX_IPSS_USBOTGSS_BASE	0x5C040000
+
 #endif /*__ASSEMBLY__ */
 #endif /* __KERNEL_STRICT_NAMES */
 
diff --git a/board/chromebook-x86/coreboot/coreboot_start16.S b/arch/arm/include/asm/arch-omap3/musb.h
index 9ad06df..423ac50 100644
--- a/board/chromebook-x86/coreboot/coreboot_start16.S
+++ b/arch/arm/include/asm/arch-omap3/musb.h
@@ -1,7 +1,6 @@
 /*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2008
- * Graeme Russ, graeme.russ@gmail.com.
+ * (C) Copyright 2012
+ * Ilya Yanok, <ilya.yanok@gmail.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,29 +17,12 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc.
  */
 
-/*
- * 16bit initialization code.
- * This code have to map the area of the boot flash
- * that is used by U-boot to its final destination.
- */
-
-.text
-.section .start16, "ax"
-.code16
-.globl board_init16
-board_init16:
-	jmp	board_init16_ret
-
-.section .bios, "ax"
-.code16
-.globl realmode_reset
-.hidden realmode_reset
-.type realmode_reset, @function
-realmode_reset:
-
-1:	hlt
-	jmp	1
+#ifndef __ASM_ARCH_OMAP3_MUSB_H
+#define __ASM_ARCH_OMAP3_MUSB_H
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+#endif
diff --git a/arch/arm/include/asm/imx-common/mx5_video.h b/arch/arm/include/asm/imx-common/mx5_video.h
new file mode 100644
index 0000000..e54c25a
--- /dev/null
+++ b/arch/arm/include/asm/imx-common/mx5_video.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2012
+ * Anatolij Gustschin, DENX Software Engineering, <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+#ifndef __MX5_VIDEO_H
+#define __MX5_VIDEO_H
+
+#ifdef CONFIG_VIDEO
+void lcd_enable(void);
+void setup_iomux_lcd(void);
+#else
+static inline void lcd_enable(void) { }
+static inline void setup_iomux_lcd(void) { }
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/omap_musb.h b/arch/arm/include/asm/omap_musb.h
new file mode 100644
index 0000000..b04d865
--- /dev/null
+++ b/arch/arm/include/asm/omap_musb.h
@@ -0,0 +1,32 @@
+/*
+ * Board data structure for musb gadget on OMAPs
+ *
+ * Copyright (C) 2012, Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_OMAP_MUSB_H
+#define __ASM_ARM_OMAP_MUSB_H
+
+extern struct musb_platform_ops musb_dsps_ops;
+extern const struct musb_platform_ops am35x_ops;
+extern const struct musb_platform_ops omap2430_ops;
+
+struct omap_musb_board_data {
+	u8 interface_type;
+	void (*set_phy_power)(u8 on);
+	void (*clear_irq)(void);
+	void (*reset)(void);
+};
+
+enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+#endif /* __ASM_ARM_OMAP_MUSB_H */
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 92cad9a..22a4d9c 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -224,6 +224,13 @@ int __arch_cpu_init(void)
 int arch_cpu_init(void)
 	__attribute__((weak, alias("__arch_cpu_init")));
 
+int __power_init_board(void)
+{
+	return 0;
+}
+int power_init_board(void)
+	__attribute__((weak, alias("__power_init_board")));
+
 init_fnc_t *init_sequence[] = {
 	arch_cpu_init,		/* basic arch cpu dependent setup */
 
@@ -525,6 +532,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 #ifdef CONFIG_ARCH_EARLY_INIT_R
 	arch_early_init_r();
 #endif
+	power_init_board();
 
 #if !defined(CONFIG_SYS_NO_FLASH)
 	puts("Flash: ");
diff --git a/arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.c b/arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.c
index c747767..b9b0998 100644
--- a/arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.c
+++ b/arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.c
@@ -615,7 +615,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 			| usb_pipeendpoint (pipe) << 7
 			| (usb_pipeisoc (pipe)? 0x8000: 0)
 			| (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
-			| usb_pipeslow (pipe) << 13
+			| (usb_dev->speed == USB_SPEED_LOW) << 13
 			| usb_maxpacket (usb_dev, pipe) << 16);
 
 	return ed_ret;
diff --git a/arch/mips/cpu/mips32/time.c b/arch/mips/cpu/mips32/time.c
index 350896a..09fc842 100644
--- a/arch/mips/cpu/mips32/time.c
+++ b/arch/mips/cpu/mips32/time.c
@@ -36,7 +36,6 @@ static unsigned long timestamp;
 int timer_init(void)
 {
 	/* Set up the timer for the first expiration. */
-	timestamp = 0;
 	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
 
 	return 0;
diff --git a/arch/mips/cpu/mips64/time.c b/arch/mips/cpu/mips64/time.c
index 5154280..720f7b7 100644
--- a/arch/mips/cpu/mips64/time.c
+++ b/arch/mips/cpu/mips64/time.c
@@ -37,7 +37,6 @@ static unsigned long timestamp;
 int timer_init(void)
 {
 	/* Set up the timer for the first expiration. */
-	timestamp = 0;
 	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
 
 	return 0;
diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk
index a307154..b706281 100644
--- a/arch/powerpc/config.mk
+++ b/arch/powerpc/config.mk
@@ -42,3 +42,8 @@ endif
 ifeq ($(CROSS_COMPILE),powerpc-openbsd-)
 PLATFORM_CPPFLAGS+= -D__PPC__
 endif
+
+# Only test once
+ifneq ($(CONFIG_SPL_BUILD),y)
+ALL-y += checkgcc4
+endif
diff --git a/arch/powerpc/cpu/mpc5xxx/Makefile b/arch/powerpc/cpu/mpc5xxx/Makefile
index 1a088b7..8de2c13 100644
--- a/arch/powerpc/cpu/mpc5xxx/Makefile
+++ b/arch/powerpc/cpu/mpc5xxx/Makefile
@@ -41,6 +41,10 @@ COBJS-y += speed.o
 COBJS-$(CONFIG_CMD_USB) += usb_ohci.o
 COBJS-$(CONFIG_CMD_USB) += usb.o
 
+ifdef CONFIG_SPL_BUILD
+COBJS-y += spl_boot.o
+endif
+
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
 START	:= $(addprefix $(obj),$(SSTART) $(CSTART))
diff --git a/arch/powerpc/cpu/mpc5xxx/spl_boot.c b/arch/powerpc/cpu/mpc5xxx/spl_boot.c
new file mode 100644
index 0000000..9f14127
--- /dev/null
+++ b/arch/powerpc/cpu/mpc5xxx/spl_boot.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Needed to align size SPL image to a 4-byte length
+ */
+u32 end_align __attribute__ ((section(".end_align")));
+
+/*
+ * Return selected boot device. On MPC5200 its only NOR flash right now.
+ */
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_NOR;
+}
+
+/*
+ * SPL version of board_init_f()
+ */
+void board_init_f(ulong bootflag)
+{
+	end_align = (u32)__spl_flash_end;
+
+	/*
+	 * First we need to initialize the SDRAM, so that the real
+	 * U-Boot or the OS (Linux) can be loaded
+	 */
+	initdram(0);
+
+	/* Clear bss */
+	memset(__bss_start, '\0', __bss_end__ - __bss_start);
+
+	/*
+	 * Init global_data pointer. Has to be done before calling
+	 * get_clocks(), as it stores some clock values into gd needed
+	 * later on in the serial driver.
+	 */
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+	/* Clear initial global data */
+	memset((void *)gd, 0, sizeof(gd_t));
+
+	/*
+	 * get_clocks() needs to be called so that the serial driver
+	 * works correctly
+	 */
+	get_clocks();
+
+	/*
+	 * Do rudimental console / serial setup
+	 */
+	preloader_console_init();
+
+	/*
+	 * Call board_init_r() (SPL framework version) to load and boot
+	 * real U-Boot or OS
+	 */
+	board_init_r(NULL, 0);
+	/* Does not return!!! */
+}
diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S
index 51cc4e2..ad5bc0a 100644
--- a/arch/powerpc/cpu/mpc5xxx/start.S
+++ b/arch/powerpc/cpu/mpc5xxx/start.S
@@ -50,6 +50,7 @@
 #define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
 #endif
 
+#ifndef CONFIG_SPL_BUILD
 /*
  * Set up GOT: Global Offset Table
  *
@@ -68,6 +69,7 @@
 	GOT_ENTRY(__bss_end__)
 	GOT_ENTRY(__bss_start)
 	END_GOT
+#endif
 
 /*
  * Version string
@@ -84,6 +86,18 @@ version_string:
 	. = EXC_OFF_SYS_RESET
 	.globl	_start
 _start:
+
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+	/*
+	 * This is the entry of the real U-Boot from a board port
+	 * that supports SPL booting on the MPC5200. We only need
+	 * to call board_init_f() here. Everything else has already
+	 * been done in the SPL u-boot version.
+	 */
+	GET_GOT			/* initialize GOT access		*/
+	bl	board_init_f	/* run 1st part of board init code (in Flash)*/
+	/* NOTREACHED - board_init_f() does not return */
+#else
 	mfmsr	r5			/* save msr contents		*/
 
 	/* Move CSBoot and adjust instruction pointer                   */
@@ -152,7 +166,9 @@ lowboot_reentry:
 	/* Be careful to keep code relocatable !			*/
 	/*--------------------------------------------------------------*/
 
+#ifndef CONFIG_SPL_BUILD
 	GET_GOT			/* initialize GOT access		*/
+#endif
 
 	/* r3: IMMR */
 	bl	cpu_init_f	/* run low-level CPU init code (in Flash)*/
@@ -160,7 +176,9 @@ lowboot_reentry:
 	bl	board_init_f	/* run 1st part of board init code (in Flash)*/
 
 	/* NOTREACHED - board_init_f() does not return */
+#endif
 
+#ifndef CONFIG_SPL_BUILD
 /*
  * Vector Table
  */
@@ -333,6 +351,7 @@ int_return:
 	lwz	r1,GPR1(r1)
 	SYNC
 	rfi
+#endif /* CONFIG_SPL_BUILD */
 
 /*
  * This code initialises the MPC5xxx processor core
@@ -522,6 +541,7 @@ get_pvr:
 	mfspr	r3, PVR
 	blr
 
+#ifndef CONFIG_SPL_BUILD
 /*------------------------------------------------------------------------------*/
 
 /*
@@ -759,3 +779,5 @@ trap_init:
 
 	mtlr	r4			/* restore link register    */
 	blr
+
+#endif /* CONFIG_SPL_BUILD */
diff --git a/nand_spl/board/freescale/common.c b/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds
index 0e099bc..cab9b92 100644
--- a/nand_spl/board/freescale/common.c
+++ b/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds
@@ -1,6 +1,5 @@
 /*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Author: Matthew McClintock <msm@freescale.com>
+ * Copyright 2012 Stefan Roese <sr@denx.de>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -10,31 +9,49 @@
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
  */
 
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/global_data.h>
+MEMORY
+{
+	sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR,
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE
+	flash : ORIGIN = CONFIG_SPL_TEXT_BASE,
+		LENGTH = CONFIG_SYS_SPL_MAX_LEN
+}
 
-DECLARE_GLOBAL_DATA_PTR;
+OUTPUT_ARCH(powerpc)
+ENTRY(_start)
+SECTIONS
+{
+	.text :
+	{
+		__start = .;
+		arch/powerpc/cpu/mpc5xxx/start.o	(.text)
+		*(.text*)
+	} > flash
 
-#ifndef CONFIG_SYS_FSL_TBCLK_DIV
-#define CONFIG_SYS_FSL_TBCLK_DIV 8
-#endif
+	. = ALIGN(4);
+	.data : { *(SORT_BY_ALIGNMENT(.data*)) } > flash
 
-void udelay(unsigned long usec)
-{
-	u32 ticks_per_usec = gd->bus_clk / (CONFIG_SYS_FSL_TBCLK_DIV * 1000000);
-	u32 ticks = ticks_per_usec * usec;
-	u32 s = mfspr(SPRN_TBRL);
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } > flash
+
+	. = ALIGN(4);
+	.end_align : { *(.end_align*) } > flash
+	__spl_flash_end = .;
 
-	while ((mfspr(SPRN_TBRL) - s) < ticks);
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(4);
+		__bss_end__ = .;
+	} > sdram
 }
diff --git a/arch/powerpc/cpu/mpc5xxx/usb_ohci.c b/arch/powerpc/cpu/mpc5xxx/usb_ohci.c
index 607034b..de07343 100644
--- a/arch/powerpc/cpu/mpc5xxx/usb_ohci.c
+++ b/arch/powerpc/cpu/mpc5xxx/usb_ohci.c
@@ -618,7 +618,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 			| usb_pipeendpoint (pipe) << 7
 			| (usb_pipeisoc (pipe)? 0x8000: 0)
 			| (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
-			| usb_pipeslow (pipe) << 13
+			| (usb_dev->speed == USB_SPEED_LOW) << 13
 			| usb_maxpacket (usb_dev, pipe) << 16);
 
 	return ed_ret;
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 78c412d..4c2b104 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -28,7 +28,22 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(CPU).o
 
-START	= start.o resetvec.o
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+START = start.o resetvec.o
+
+ifdef MINIMAL
+
+COBJS-y	+= cpu_init_early.o tlb.o spl_minimal.o
+
+else
+
 SOBJS-$(CONFIG_MP)	+= release.o
 SOBJS	= $(SOBJS-y)
 
@@ -121,17 +136,20 @@ COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
 COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
 COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
 
-COBJS	= $(COBJS-y)
-COBJS	+= cpu.o
-COBJS	+= cpu_init.o
-COBJS	+= cpu_init_early.o
-COBJS	+= interrupts.o
-COBJS	+= speed.o
-COBJS	+= tlb.o
-COBJS	+= traps.o
+COBJS-y	+= cpu.o
+COBJS-y	+= cpu_init.o
+COBJS-y	+= cpu_init_early.o
+COBJS-y	+= interrupts.o
+COBJS-y	+= speed.o
+COBJS-y	+= tlb.o
+COBJS-y	+= traps.o
 
 # Stub implementations of cache management functions for USB
-COBJS += cache.o
+COBJS-y += cache.o
+
+endif # not minimal
+
+COBJS	= $(COBJS-y)
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 2be192d..e5ecf5d 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -24,6 +24,109 @@
 #include <command.h>
 #include <linux/compiler.h>
 #include <asm/processor.h>
+#include "fsl_corenet_serdes.h"
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
+/*
+ * This work-around is implemented in PBI, so just check to see if the
+ * work-around was actually applied.  To do this, we check for specific data
+ * at specific addresses in DCSR.
+ *
+ * Array offsets[] contains a list of offsets within DCSR.  According to the
+ * erratum document, the value at each offset should be 2.
+ */
+static void check_erratum_a4849(uint32_t svr)
+{
+	void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000;
+	unsigned int i;
+
+#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
+	static const uint8_t offsets[] = {
+		0x50, 0x54, 0x58, 0x90, 0x94, 0x98
+	};
+#endif
+#ifdef CONFIG_PPC_P4080
+	static const uint8_t offsets[] = {
+		0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac
+	};
+#endif
+	uint32_t x108; /* The value that should be at offset 0x108 */
+
+	for (i = 0; i < ARRAY_SIZE(offsets); i++) {
+		if (in_be32(dcsr + offsets[i]) != 2) {
+			printf("Work-around for Erratum A004849 is not enabled\n");
+			return;
+		}
+	}
+
+#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
+	x108 = 0x12;
+#endif
+
+#ifdef CONFIG_PPC_P4080
+	/*
+	 * For P4080, the erratum document says that the value at offset 0x108
+	 * should be 0x12 on rev2, or 0x1c on rev3.
+	 */
+	if (SVR_MAJ(svr) == 2)
+		x108 = 0x12;
+	if (SVR_MAJ(svr) == 3)
+		x108 = 0x1c;
+#endif
+
+	if (in_be32(dcsr + 0x108) != x108) {
+		printf("Work-around for Erratum A004849 is not enabled\n");
+		return;
+	}
+
+	/* Everything matches, so the erratum work-around was applied */
+
+	printf("Work-around for Erratum A004849 enabled\n");
+}
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
+/*
+ * This work-around is implemented in PBI, so just check to see if the
+ * work-around was actually applied.  To do this, we check for specific data
+ * at specific addresses in the SerDes register block.
+ *
+ * The work-around says that for each SerDes lane, write BnTTLCRy0 =
+ * 0x1B00_0001, Register 2 = 0x0088_0000, and Register 3 = 0x4000_0000.
+
+ */
+static void check_erratum_a4580(uint32_t svr)
+{
+	const serdes_corenet_t __iomem *srds_regs =
+		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	unsigned int lane;
+
+	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+		if (serdes_lane_enabled(lane)) {
+			const struct serdes_lane __iomem *srds_lane =
+				&srds_regs->lane[serdes_get_lane_idx(lane)];
+
+			/*
+			 * Verify that the values we were supposed to write in
+			 * the PBI are actually there.  Also, the lower 15
+			 * bits of res4[3] should be the same as the upper 15
+			 * bits of res4[1].
+			 */
+			if ((in_be32(&srds_lane->ttlcr0) != 0x1b000001) ||
+			    (in_be32(&srds_lane->res4[1]) != 0x880000) ||
+			    (in_be32(&srds_lane->res4[3]) != 0x40000044)) {
+				printf("Work-around for Erratum A004580 is "
+				       "not enabled\n");
+				return;
+			}
+		}
+	}
+
+	/* Everything matches, so the erratum work-around was applied */
+
+	printf("Work-around for Erratum A004580 enabled\n");
+}
+#endif
 
 static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
@@ -137,6 +240,17 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
 	puts("Work-around for Erratum A004934 enabled\n");
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
+	/* This work-around is implemented in PBI, so just check for it */
+	check_erratum_a4849(svr);
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
+	/* This work-around is implemented in PBI, so just check for it */
+	check_erratum_a4580(svr);
+#endif
+#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
+	puts("Work-around for Erratum PCIe-A003 enabled\n");
+#endif
 	return 0;
 }
 
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index db232e6..9b9832c 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -332,7 +332,8 @@ void mpc85xx_reginfo(void)
 
 /* Common ddr init for non-corenet fsl 85xx platforms */
 #ifndef CONFIG_FSL_CORENET
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SYS_INIT_L2_ADDR)
+#if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \
+	!defined(CONFIG_SYS_INIT_L2_ADDR)
 phys_size_t initdram(int board_type)
 {
 #if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
@@ -450,21 +451,21 @@ static void dump_spd_ddr_reg(void)
 	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 		switch (i) {
 		case 0:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 			break;
-#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 		case 1:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
 		case 2:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
 		case 3:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
 			break;
 #endif
 		default:
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index f01804b..d1155e8 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -350,6 +350,10 @@ int cpu_init_r(void)
 #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 	struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
 #endif
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
+	extern int spin_table_compat;
+	const char *spin;
+#endif
 
 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
 	defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
@@ -395,6 +399,14 @@ int cpu_init_r(void)
 	}
 #endif
 
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
+	spin = getenv("spin_table_compat");
+	if (spin && (*spin == 'n'))
+		spin_table_compat = 0;
+	else
+		spin_table_compat = 1;
+#endif
+
 	puts ("L2:    ");
 
 #if defined(CONFIG_L2_CACHE)
@@ -470,7 +482,7 @@ int cpu_init_r(void)
 				&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
 			l2srbar = CONFIG_SYS_INIT_L2_ADDR;
 			l2cache->l2srbar0 = l2srbar;
-			printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
+			printf(", moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
 		}
 #endif /* CONFIG_SYS_INIT_L2_ADDR */
 		puts("\n");
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
index 54437dd..8a86819 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
@@ -18,7 +18,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 			     unsigned int ctrl_num)
 {
 	unsigned int i;
-	volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 
 	if (ctrl_num != 0) {
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
@@ -73,7 +73,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 void
 ddr_enable_ecc(unsigned int dram_size)
 {
-	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
 
 	dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
 
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
index 49000a1..a705862 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
@@ -19,15 +19,12 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 			     unsigned int ctrl_num)
 {
 	unsigned int i;
-#ifdef CONFIG_MPC83xx
-	ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC83xx_DDR_ADDR;
-#else
-	ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
-#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+	ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+
+#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint svr;
 #endif
-#endif
 
 	if (ctrl_num) {
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index f118dd5..ef0dd1d 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -32,21 +32,21 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 
 	switch (ctrl_num) {
 	case 0:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 		break;
-#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 	case 1:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 		break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
 	case 2:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
 		break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
 	case 3:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
 		break;
 #endif
 	default:
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 7f466ac..5495dc5 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -714,9 +714,13 @@ void fsl_serdes_init(void)
 
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
 		/*
-		 * Set BnTTLCRy0[FLT_SEL] = 000011 and set BnTTLCRy0[17] = 1 for
-		 * each of the SerDes lanes selected as SGMII, XAUI, SRIO, or
-		 * AURORA before the device is initialized.
+		 * Set BnTTLCRy0[FLT_SEL] = 011011 and set BnTTLCRy0[31] = 1
+		 * for each of the SerDes lanes selected as SGMII, XAUI, SRIO,
+		 * or AURORA before the device is initialized.
+		 *
+		 * Note that this part of the SERDES-9 work-around is
+		 * redundant if the work-around for A-4580 has already been
+		 * applied via PBI.
 		 */
 		switch (lane_prtcl) {
 		case SGMII_FM1_DTSEC1:
@@ -733,10 +737,12 @@ void fsl_serdes_init(void)
 		case SRIO1:
 		case SRIO2:
 		case AURORA:
-			clrsetbits_be32(&srds_regs->lane[idx].ttlcr0,
-					SRDS_TTLCR0_FLT_SEL_MASK,
-					SRDS_TTLCR0_FLT_SEL_750PPM |
-					SRDS_TTLCR0_PM_DIS);
+			out_be32(&srds_regs->lane[idx].ttlcr0,
+				 SRDS_TTLCR0_FLT_SEL_KFR_26 |
+				 SRDS_TTLCR0_FLT_SEL_KPH_28 |
+				 SRDS_TTLCR0_FLT_SEL_750PPM |
+				 SRDS_TTLCR0_FREQOVD_EN);
+			break;
 		default:
 			break;
 		}
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 4ba44a9..5c4b1e3 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -351,7 +351,13 @@ __secondary_reset_vector:
 	.align L1_CACHE_SHIFT
 	.global __second_half_boot_page
 __second_half_boot_page:
-#define EPAPR_MAGIC		0x45504150
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+	lis	r3,(spin_table_compat - __second_half_boot_page)@h
+	ori	r3,r3,(spin_table_compat - __second_half_boot_page)@l
+	add	r3,r3,r11 /* r11 has the address of __second_half_boot_page */
+	lwz	r14,0(r3)
+#endif
+
 #define ENTRY_ADDR_UPPER	0
 #define ENTRY_ADDR_LOWER	4
 #define ENTRY_R3_UPPER		8
@@ -383,7 +389,24 @@ __second_half_boot_page:
 	stw	r8,ENTRY_ADDR_LOWER(r10)
 
 	/* spin waiting for addr */
-3:	lwz	r4,ENTRY_ADDR_LOWER(r10)
+3:
+/*
+ * To comply with ePAPR 1.1, the spin table has been moved to cache-enabled
+ * memory. Old OS may not work with this change. A patch is waiting to be
+ * accepted for Linux kernel. Other OS needs similar fix to spin table.
+ * For OSes with old spin table code, we can enable this temporary fix by
+ * setting environmental variable "spin_table_compat". For new OSes, set
+ * "spin_table_compat=no". After Linux is fixed, we can remove this macro
+ * and related code. For now, it is enabled by default.
+ */
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+	cmpwi   r14,0
+	beq     4f
+	dcbf    0, r10
+	sync
+4:
+#endif
+	lwz	r4,ENTRY_ADDR_LOWER(r10)
 	andi.	r11,r4,1
 	bne	3b
 	isync
@@ -460,5 +483,14 @@ __second_half_boot_page:
 	.globl __spin_table
 __spin_table:
 	.space CONFIG_MAX_CPUS*ENTRY_SIZE
+
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+	.align L1_CACHE_SHIFT
+	.global spin_table_compat
+spin_table_compat:
+	.long	1
+
+#endif
+
 __spin_table_end:
 	.space 4096 - (__spin_table_end - __spin_table)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
index bf7a6f6..c6b9cd0 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
+++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
@@ -21,12 +21,16 @@
  */
 
 #include <common.h>
+#include <asm/processor.h>
+#include <asm/global_data.h>
 #include <asm/fsl_ifc.h>
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void cpu_init_f(void)
 {
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+#ifdef CONFIG_SYS_INIT_L2_ADDR
 	ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
 
 	out_be32(&l2cache->l2srbar0, CONFIG_SYS_INIT_L2_ADDR);
@@ -40,3 +44,16 @@ void cpu_init_f(void)
 		(MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE));
 #endif
 }
+
+#ifndef CONFIG_SYS_FSL_TBCLK_DIV
+#define CONFIG_SYS_FSL_TBCLK_DIV 8
+#endif
+
+void udelay(unsigned long usec)
+{
+	u32 ticks_per_usec = gd->bus_clk / (CONFIG_SYS_FSL_TBCLK_DIV * 1000000);
+	u32 ticks = ticks_per_usec * usec;
+	u32 s = mfspr(SPRN_TBRL);
+
+	while ((mfspr(SPRN_TBRL) - s) < ticks);
+}
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index ac17f9d..bb0dc1a 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -44,6 +44,15 @@
 #undef	MSR_KERNEL
 #define MSR_KERNEL ( MSR_ME )	/* Machine Check */
 
+#if defined(CONFIG_NAND_SPL) || \
+	(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL))
+#define MINIMAL_SPL
+#endif
+
+#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
+#define NOR_BOOT
+#endif
+
 /*
  * Set up GOT: Global Offset Table
  *
@@ -53,7 +62,7 @@
 	GOT_ENTRY(_GOT2_TABLE_)
 	GOT_ENTRY(_FIXUP_TABLE_)
 
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
 	GOT_ENTRY(_start)
 	GOT_ENTRY(_start_of_vectors)
 	GOT_ENTRY(_end_of_vectors)
@@ -282,51 +291,8 @@ l2_disabled:
 	isync
 	.endm
 
-#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL)
-/*
- * TLB entry for debuggging in AS1
- * Create temporary TLB entry in AS0 to handle debug exception
- * As on debug exception MSR is cleared i.e. Address space is changed
- * to 0. A TLB entry (in AS0) is required to handle debug exception generated
- * in AS1.
- */
-
-#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
-/*
- * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
- * bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
- * and this window is outside of 4K boot window.
- */
-	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
-		0, BOOKE_PAGESZ_4M, \
-		CONFIG_SYS_MONITOR_BASE & 0xffc00000,  MAS2_I|MAS2_G, \
-		0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
-		0, r6
-
-#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
-	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
-		0, BOOKE_PAGESZ_1M, \
-		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
-		CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
-		0, r6
-#else
-/*
- * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
- * because "nexti" will resize TLB to 4K
- */
-	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
-		0, BOOKE_PAGESZ_256K, \
-		CONFIG_SYS_MONITOR_BASE, MAS2_I, \
-		CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
-		0, r6
-#endif
-#endif
-
-/*
- * Ne need to setup interrupt vector for NAND SPL
- * because NAND SPL never compiles it.
- */
-#if !defined(CONFIG_NAND_SPL)
+/* Interrupt vectors do not fit in minimal SPL. */
+#if !defined(MINIMAL_SPL)
 	/* Setup interrupt vectors */
 	lis	r1,CONFIG_SYS_MONITOR_BASE@h
 	mtspr	IVPR,r1
@@ -534,10 +500,6 @@ nexti:	mflr	r1		/* R1 = our PC */
 	li	r3, 0
 	mtspr	MAS1, r3
 1:	cmpw	r3, r14
-#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL)
-	cmpwi	cr1, r3, CONFIG_SYS_PPC_E500_DEBUG_TLB
-	cror	cr0*4+eq, cr0*4+eq, cr1*4+eq
-#endif
 	rlwinm	r5, r3, 16, MAS0_ESEL_MSK
 	addi	r3, r3, 1
 	beq	2f		/* skip the entry we're executing from */
@@ -553,6 +515,46 @@ nexti:	mflr	r1		/* R1 = our PC */
 2:	cmpw	r3, r4
 	blt	1b
 
+#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(MINIMAL_SPL)
+/*
+ * TLB entry for debuggging in AS1
+ * Create temporary TLB entry in AS0 to handle debug exception
+ * As on debug exception MSR is cleared i.e. Address space is changed
+ * to 0. A TLB entry (in AS0) is required to handle debug exception generated
+ * in AS1.
+ */
+
+#ifdef NOR_BOOT
+/*
+ * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
+ * bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
+ * and this window is outside of 4K boot window.
+ */
+	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+		0, BOOKE_PAGESZ_4M, \
+		CONFIG_SYS_MONITOR_BASE & 0xffc00000,  MAS2_I|MAS2_G, \
+		0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
+
+#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
+	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+		0, BOOKE_PAGESZ_1M, \
+		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+		CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
+#else
+/*
+ * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
+ * because "nexti" will resize TLB to 4K
+ */
+	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+		0, BOOKE_PAGESZ_256K, \
+		CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS2_I, \
+		CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
+#endif
+#endif
+
 /*
  * Relocate CCSR, if necessary.  We relocate CCSR if (obviously) the default
  * location is not where we want it.  This typically happens on a 36-bit
@@ -1036,7 +1038,7 @@ create_init_ram_area:
 	lis     r6,FSL_BOOKE_MAS0(1, 15, 0)@h
 	ori     r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
 
-#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
+#ifdef NOR_BOOT
 	/* create a temp mapping in AS=1 to the 4M boot window */
 	create_tlb1_entry 15, \
 		1, BOOKE_PAGESZ_4M, \
@@ -1050,8 +1052,8 @@ create_init_ram_area:
 	*/
 	create_tlb1_entry 15, \
 		1, BOOKE_PAGESZ_1M, \
-		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
-		CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+		CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
+		CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
 		0, r6
 #else
 	/*
@@ -1060,8 +1062,8 @@ create_init_ram_area:
 	 */
 	create_tlb1_entry 15, \
 		1, BOOKE_PAGESZ_1M, \
-		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
-		CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+		CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
+		CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
 		0, r6
 #endif
 
@@ -1111,7 +1113,8 @@ switch_as:
 	bdnz	1b
 
 	/* Jump out the last 4K page and continue to 'normal' start */
-#ifdef CONFIG_SYS_RAMBOOT
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
+	/* We assume that we're already running at the address we're linked at */
 	b	_start_cont
 #else
 	/* Calculate absolute address in FLASH and jump there		*/
@@ -1157,7 +1160,7 @@ _start_cont:
 
 	/* NOTREACHED - board_init_f() does not return */
 
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
 	. = EXC_OFF_SYS_RESET
 	.globl	_start_of_vectors
 _start_of_vectors:
@@ -1601,7 +1604,7 @@ in32:
 in32r:
 	lwbrx	r3,r0,r3
 	blr
-#endif  /* !CONFIG_NAND_SPL */
+#endif  /* !MINIMAL_SPL */
 
 /*------------------------------------------------------------------------------*/
 
@@ -1798,7 +1801,7 @@ clear_bss:
 	mr	r4,r10		/* Destination Address		*/
 	bl	board_init_r
 
-#ifndef CONFIG_NAND_SPL
+#ifndef MINIMAL_SPL
 	/*
 	 * Copy exception vector code to low memory
 	 *
@@ -1971,4 +1974,4 @@ setup_ivors:
 
 #include "fixed_ivor.S"
 	blr
-#endif /* !CONFIG_NAND_SPL */
+#endif /* !MINIMAL_SPL */
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index a548dec..f44fadc 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -55,7 +55,7 @@ void init_tlbs(void)
 	return ;
 }
 
-#ifndef CONFIG_NAND_SPL
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
 void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
 		       phys_addr_t *rpn)
 {
@@ -332,4 +332,4 @@ void clear_ddr_tlbs(unsigned int memsize_in_meg)
 }
 
 
-#endif /* !CONFIG_NAND_SPL */
+#endif /* not SPL */
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
new file mode 100644
index 0000000..1c408e2
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de
+ *
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "config.h"	/* CONFIG_BOARDDIR */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+	. = CONFIG_SPL_TEXT_BASE;
+	.text : {
+		*(.text*)
+	}
+	_etext = .;
+
+	.reloc : {
+		_GOT2_TABLE_ = .;
+		KEEP(*(.got2))
+		KEEP(*(.got))
+		PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
+		_FIXUP_TABLE_ = .;
+		KEEP(*(.fixup))
+	}
+	__got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
+	__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+	. = ALIGN(8);
+	.data : {
+		*(.rodata*)
+		*(.data*)
+		*(.sdata*)
+	}
+	_edata  =  .;
+
+	. = ALIGN(8);
+	__init_begin = .;
+	__init_end = .;
+/* FIXME for non-NAND SPL */
+#if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
+	.bootpg ADDR(.text) + 0x1000 :
+	{
+		start.o	(.bootpg)
+	}
+#define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */
+#elif defined(CONFIG_FSL_ELBC)
+#define RESET_VECTOR_OFFSET 0xffc /* LBC has 4k sram */
+#else
+#error unknown NAND controller
+#endif
+	.resetvec ADDR(.text) + RESET_VECTOR_OFFSET : {
+		KEEP(*(.resetvec))
+	} = 0xffff
+
+	/*
+	 * Make sure that the bss segment isn't linked at 0x0, otherwise its
+	 * address won't be updated during relocation fixups.
+	 */
+	. |= 0x10;
+
+	__bss_start = .;
+	.bss : {
+		*(.sbss*)
+		*(.bss*)
+	}
+	__bss_end__ = .;
+}
diff --git a/arch/powerpc/cpu/mpc86xx/ddr-8641.c b/arch/powerpc/cpu/mpc86xx/ddr-8641.c
index b8f2c93..92ba26d 100644
--- a/arch/powerpc/cpu/mpc86xx/ddr-8641.c
+++ b/arch/powerpc/cpu/mpc86xx/ddr-8641.c
@@ -22,10 +22,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 
 	switch (ctrl_num) {
 	case 0:
-		ddr = (void *)CONFIG_SYS_MPC86xx_DDR_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 		break;
 	case 1:
-		ddr = (void *)CONFIG_SYS_MPC86xx_DDR2_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 		break;
 	default:
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile
index 4ae26e4..3dc8e05 100644
--- a/arch/powerpc/cpu/mpc8xxx/Makefile
+++ b/arch/powerpc/cpu/mpc8xxx/Makefile
@@ -10,6 +10,20 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib8xxx.o
 
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+
+COBJS-$(CONFIG_FSL_LAW) += law.o
+
+else
+
 ifneq ($(CPU),mpc83xx)
 COBJS-y	+= cpu.o
 endif
@@ -18,6 +32,9 @@ COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
 COBJS-$(CONFIG_FSL_IFC) += fsl_ifc.o
 COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o
 COBJS-$(CONFIG_SYS_SRIO) += srio.o
+COBJS-$(CONFIG_FSL_LAW) += law.o
+
+endif
 
 SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 088cc0e..8016bcd 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -18,15 +18,7 @@
 
 #include "ddr.h"
 
-#ifdef CONFIG_MPC83xx
-	#define _DDR_ADDR CONFIG_SYS_MPC83xx_DDR_ADDR
-#elif defined(CONFIG_MPC85xx)
-	#define _DDR_ADDR CONFIG_SYS_MPC85xx_DDR_ADDR
-#elif defined(CONFIG_MPC86xx)
-	#define _DDR_ADDR CONFIG_SYS_MPC86xx_DDR_ADDR
-#else
-	#error "Undefined _DDR_ADDR"
-#endif
+#define _DDR_ADDR CONFIG_SYS_MPC8xxx_DDR_ADDR
 
 static u32 fsl_ddr_get_version(void)
 {
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index 940ffff..acfe1f0 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -133,14 +133,8 @@ u32 fsl_ddr_get_intl3r(void)
 
 void board_add_ram_info(int use_default)
 {
-#if defined(CONFIG_MPC83xx)
-	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	ccsr_ddr_t *ddr = (void *)&immap->ddr;
-#elif defined(CONFIG_MPC85xx)
-	ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-#elif defined(CONFIG_MPC86xx)
-	ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR);
-#endif
+	ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
+
 #if	defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3)
 	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 #endif
@@ -152,13 +146,13 @@ void board_add_ram_info(int use_default)
 
 #if CONFIG_NUM_DDR_CONTROLLERS >= 2
 	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
-		ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+		ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 		sdram_cfg = in_be32(&ddr->sdram_cfg);
 	}
 #endif
 #if CONFIG_NUM_DDR_CONTROLLERS >= 3
 	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
-		ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+		ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
 		sdram_cfg = in_be32(&ddr->sdram_cfg);
 	}
 #endif
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 68db8e2..1986fea 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -217,7 +217,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
 #if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */
 void fdt_fixup_crypto_node(void *blob, int sec_rev)
 {
-	const struct sec_rev_prop {
+	static const struct sec_rev_prop {
 		u32 sec_rev;
 		u32 num_channels;
 		u32 channel_fifo_len;
@@ -232,8 +232,8 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev)
 		{ 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
 		{ 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
 	};
-	char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
-			    sizeof("fsl,secX.Y")];
+	static char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+				   sizeof("fsl,secX.Y")];
 	int crypto_node, sec_idx, err;
 	char *p;
 	u32 val;
diff --git a/drivers/misc/fsl_law.c b/arch/powerpc/cpu/mpc8xxx/law.c
index 223cd5d..ce1d71e 100644
--- a/drivers/misc/fsl_law.c
+++ b/arch/powerpc/cpu/mpc8xxx/law.c
@@ -92,7 +92,7 @@ void disable_law(u8 idx)
 	return;
 }
 
-#ifndef CONFIG_NAND_SPL
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
 static int get_law_entry(u8 i, struct law_entry *e)
 {
 	u32 lawar;
@@ -122,7 +122,7 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 	return idx;
 }
 
-#ifndef CONFIG_NAND_SPL
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
 int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 {
 	u32 idx;
@@ -233,7 +233,7 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
 
 	return 0;
 }
-#endif
+#endif /* not SPL */
 
 void init_laws(void)
 {
@@ -258,9 +258,10 @@ void init_laws(void)
 			gd->used_laws |= (1 << i);
 	}
 
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if (defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)) || \
+	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
 	/*
-	 * in NAND boot we've already parsed the law_table and setup those LAWs
+	 * in SPL boot we've already parsed the law_table and setup those LAWs
 	 * so don't do it again.
 	 */
 	return;
diff --git a/arch/powerpc/cpu/ppc4xx/usb_ohci.c b/arch/powerpc/cpu/ppc4xx/usb_ohci.c
index 4ce2726..f820c37 100644
--- a/arch/powerpc/cpu/ppc4xx/usb_ohci.c
+++ b/arch/powerpc/cpu/ppc4xx/usb_ohci.c
@@ -621,7 +621,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 			| usb_pipeendpoint (pipe) << 7
 			| (usb_pipeisoc (pipe)? 0x8000: 0)
 			| (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
-			| usb_pipeslow (pipe) << 13
+			| (usb_dev->speed == USB_SPEED_LOW) << 13
 			| usb_maxpacket (usb_dev, pipe) << 16);
 
 	return ed_ret;
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 03baaee..0b9638b 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -27,6 +27,12 @@
 #error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
 #endif
 
+/*
+ * This macro should be removed when we no longer care about backwards
+ * compatibility with older operating systems.
+ */
+#define CONFIG_PPC_SPINTABLE_COMPATIBLE
+
 #define FSL_DDR_VER_4_7	47
 
 /* Number of TLB CAM entries we have on FSL Book-E chips */
@@ -131,7 +137,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	3
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
@@ -175,7 +180,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	2
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -188,7 +192,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	3
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
@@ -242,7 +245,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	2
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -318,7 +320,6 @@
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
@@ -343,6 +344,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2	0x11
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
 
 #elif defined(CONFIG_PPC_P3041)
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1
@@ -350,7 +352,6 @@
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
@@ -375,6 +376,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2	0x11
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
 
 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1
@@ -417,6 +419,9 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x20
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
+#define CONFIG_SYS_FSL_ERRATUM_A004580
+#define CONFIG_SYS_P4080_ERRATUM_PCIE_A003
 
 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
 #define CONFIG_SYS_PPC64		/* 64-bit core */
@@ -425,7 +430,6 @@
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
@@ -449,6 +453,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
 
 #elif defined(CONFIG_PPC_P5040)
+#define CONFIG_SYS_PPC64
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1
 #define CONFIG_MAX_CPUS			4
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	3
@@ -472,7 +477,6 @@
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
 #define CONFIG_SYS_FSL_ERRATUM_A004699
-#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC
 #define CONFIG_SYS_FSL_ERRATUM_A004510
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x10
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index 679832c..8ac13fc 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -1035,9 +1035,9 @@ typedef struct immap {
 } immap_t;
 #endif
 
-#define CONFIG_SYS_MPC83xx_DDR_OFFSET	(0x2000)
-#define CONFIG_SYS_MPC83xx_DDR_ADDR \
-			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET	(0x2000)
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR \
+			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
 #define CONFIG_SYS_MPC83xx_DMA_OFFSET	(0x8000)
 #define CONFIG_SYS_MPC83xx_DMA_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET)
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 969f726..296b549 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2619,7 +2619,7 @@ typedef struct serdes_corenet {
 #define SRDS_PCCR2_RST_XGMII1		0x00800000
 #define SRDS_PCCR2_RST_XGMII2		0x00400000
 	u32	res5[197];
-	struct {
+	struct serdes_lane {
 		u32	gcr0;	/* General Control Register 0 */
 #define SRDS_GCR0_RRST			0x00400000
 #define SRDS_GCR0_1STLANE		0x00010000
@@ -2637,8 +2637,11 @@ typedef struct serdes_corenet {
 		u32	res3;
 		u32	ttlcr0;	/* Transition Tracking Loop Ctrl 0 */
 #define SRDS_TTLCR0_FLT_SEL_MASK	0x3f000000
+#define SRDS_TTLCR0_FLT_SEL_KFR_26	0x10000000
+#define SRDS_TTLCR0_FLT_SEL_KPH_28	0x08000000
 #define SRDS_TTLCR0_FLT_SEL_750PPM	0x03000000
 #define SRDS_TTLCR0_PM_DIS		0x00004000
+#define SRDS_TTLCR0_FREQOVD_EN		0x00000001
 		u32	res4[7];
 	} lane[24];
 	u32 res6[384];
@@ -2867,9 +2870,9 @@ struct ccsr_pman {
 #define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET	0x5000
 #define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET	0x6000
 #endif
-#define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x8000
-#define CONFIG_SYS_MPC85xx_DDR2_OFFSET		0x9000
-#define CONFIG_SYS_MPC85xx_DDR3_OFFSET		0xA000
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET		0x8000
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET		0x9000
+#define CONFIG_SYS_MPC8xxx_DDR3_OFFSET		0xA000
 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET	0xE1000
 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET	0xE2000
 #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET	0xEA000
@@ -2929,9 +2932,9 @@ struct ccsr_pman {
 #define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET	0xC20000
 #else
 #define CONFIG_SYS_MPC85xx_ECM_OFFSET		0x0000
-#define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x2000
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET		0x2000
 #define CONFIG_SYS_MPC85xx_LBC_OFFSET		0x5000
-#define CONFIG_SYS_MPC85xx_DDR2_OFFSET		0x6000
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET		0x6000
 #define CONFIG_SYS_MPC85xx_ESPI_OFFSET		0x7000
 #define CONFIG_SYS_MPC85xx_PCI1_OFFSET		0x8000
 #define CONFIG_SYS_MPC85xx_PCIX_OFFSET		0x8000
@@ -2998,12 +3001,12 @@ struct ccsr_pman {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET)
 #define CONFIG_SYS_MPC85xx_ECM_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR2_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR3_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR3_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR2_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR3_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR3_OFFSET)
 #define CONFIG_SYS_LBC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
 #define CONFIG_SYS_IFC_ADDR \
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
index cc338e4..2a704fe 100644
--- a/arch/powerpc/include/asm/immap_86xx.h
+++ b/arch/powerpc/include/asm/immap_86xx.h
@@ -1252,10 +1252,10 @@ typedef struct immap {
 
 extern immap_t  *immr;
 
-#define CONFIG_SYS_MPC86xx_DDR_OFFSET	0x2000
-#define CONFIG_SYS_MPC86xx_DDR_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR_OFFSET)
-#define CONFIG_SYS_MPC86xx_DDR2_OFFSET	0x6000
-#define CONFIG_SYS_MPC86xx_DDR2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET	0x2000
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET	0x6000
+#define CONFIG_SYS_MPC8xxx_DDR2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET)
 #define CONFIG_SYS_MPC86xx_DMA_OFFSET	0x21000
 #define CONFIG_SYS_MPC86xx_DMA_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET)
 #define CONFIG_SYS_MPC86xx_PIC_OFFSET	0x40000
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 7aa3231..19fe250 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1342,4 +1342,10 @@ void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
 #endif
 #endif /* CONFIG_MACH_SPECIFIC */
 
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_440)
+ #define EPAPR_MAGIC	(0x45504150)
+#else
+ #define EPAPR_MAGIC	(0x65504150)
+#endif
+
 #endif /* __ASM_PPC_PROCESSOR_H */
diff --git a/board/chromebook-x86/coreboot/coreboot_pci.c b/arch/powerpc/include/asm/spl.h
index 732ca3c..f43bc23 100644
--- a/board/chromebook-x86/coreboot/coreboot_pci.c
+++ b/arch/powerpc/include/asm/spl.h
@@ -1,10 +1,6 @@
 /*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2008,2009
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -16,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -24,7 +20,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
+#ifndef	_ASM_SPL_H_
+#define	_ASM_SPL_H_
+
+#define BOOT_DEVICE_NOR		1
+
+/* Linker symbols */
+extern char __bss_start[], __bss_end__[];
 
-void pci_init_board(void)
-{
-}
+#endif
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 808021c..844fe86 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -38,13 +38,28 @@ endif
 
 LIB	= $(obj)lib$(ARCH).o
 
-SOBJS-y	+= ppccache.o
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+COBJS-y += cache.o
+else
+
 SOBJS-y	+= ppcstring.o
+
+SOBJS-y	+= ppccache.o
 SOBJS-y	+= ticks.o
 SOBJS-y	+= reloc.o
 
 COBJS-$(CONFIG_BAT_RW) += bat_rw.o
+ifndef CONFIG_SPL_BUILD
 COBJS-y	+= board.o
+endif
 COBJS-y	+= bootm.o
 COBJS-y	+= cache.o
 COBJS-y	+= extable.o
@@ -53,6 +68,11 @@ COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
 COBJS-${CONFIG_CMD_IDE} += ide.o
 COBJS-y	+= time.o
 
+# Don't include the MPC5xxx special memcpy into the
+# SPL U-Boot image. memcpy is used in the SPL NOR
+# flash driver. And we need the real, fast memcpy
+# here. We have no problems with unaligned access.
+ifndef CONFIG_SPL_BUILD
 # Workaround for local bus unaligned access problems
 # on MPC512x and MPC5200
 ifdef CONFIG_MPC512X
@@ -63,6 +83,13 @@ ifdef CONFIG_MPC5200
 $(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy
 COBJS-y += memcpy_mpc5200.o
 endif
+endif
+
+endif # not minimal
+
+ifdef CONFIG_SPL_BUILD
+COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
+endif
 
 COBJS	+= $(sort $(COBJS-y))
 
@@ -75,12 +102,6 @@ TARGETS += $(LIB)
 all: $(TARGETS)
 
 $(LIB):	$(obj).depend $(OBJS)
-	@if ! $(CROSS_COMPILE)readelf -S $(OBJS) | grep -q '\.fixup.*PROGBITS';\
-	then \
-		echo "ERROR: Your compiler doesn't generate .fixup sections!";\
-		echo "       Upgrade to a recent toolchain."; \
-		exit 1; \
-	fi;
 	$(call cmd_link_o_target, $(OBJS))
 
 $(LIBGCC): $(obj).depend $(LGOBJS)
diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index ac5bd6d..7088293 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -87,12 +87,6 @@ static void boot_jump_linux(bootm_headers_t *images)
 		 *   r8: 0
 		 *   r9: 0
 		 */
-#if defined(CONFIG_MPC85xx) || defined(CONFIG_440)
- #define EPAPR_MAGIC	(0x45504150)
-#else
- #define EPAPR_MAGIC	(0x65504150)
-#endif
-
 		debug ("   Booting using OF flat tree...\n");
 		WATCHDOG_RESET ();
 		(*kernel) ((bd_t *)of_flat_tree, 0, 0, EPAPR_MAGIC,
diff --git a/arch/powerpc/lib/spl.c b/arch/powerpc/lib/spl.c
new file mode 100644
index 0000000..502c93b
--- /dev/null
+++ b/arch/powerpc/lib/spl.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <common.h>
+#include <config.h>
+#include <spl.h>
+#include <image.h>
+#include <linux/compiler.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This function jumps to an image with argument. Normally an FDT or ATAGS
+ * image.
+ * arg: Pointer to paramter image in RAM
+ */
+#ifdef CONFIG_SPL_OS_BOOT
+void __noreturn jump_to_image_linux(void *arg)
+{
+	debug("Entering kernel arg pointer: 0x%p\n", arg);
+	typedef void (*image_entry_arg_t)(void *, ulong r4, ulong r5, ulong r6,
+					  ulong r7, ulong r8, ulong r9)
+		__attribute__ ((noreturn));
+	image_entry_arg_t image_entry =
+		(image_entry_arg_t)spl_image.entry_point;
+
+	image_entry(arg, 0, 0, EPAPR_MAGIC, CONFIG_SYS_BOOTMAPSZ, 0, 0);
+}
+#endif /* CONFIG_SPL_OS_BOOT */
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index 56fd77a..24b5ce8 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -274,8 +274,8 @@ void enable_hlt(void);
 
 static inline void trigger_address_error(void)
 {
+	set_bl_bit();
 	__asm__ __volatile__ (
-		"ldc %0, sr\n\t"
 		"mov.l @%1, %0"
 		:
 		: "r" (0x10000000), "r" (0x80000001)
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 7f1fc18..57324b6 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -28,12 +28,13 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(CPU).o
 
-START	= start.o start16.o resetvec.o
-COBJS	= interrupts.o cpu.o
+START-y	= start.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += resetvec.o start16.o
+COBJS	= interrupts.o cpu.o timer.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-START	:= $(addprefix $(obj),$(START))
+START	:= $(addprefix $(obj),$(START-y) $(RESET_OBJS-))
 
 all:	$(obj).depend $(START) $(LIB)
 
diff --git a/arch/x86/cpu/coreboot/Makefile b/arch/x86/cpu/coreboot/Makefile
index 13f5f8a..b1d3e95 100644
--- a/arch/x86/cpu/coreboot/Makefile
+++ b/arch/x86/cpu/coreboot/Makefile
@@ -33,12 +33,13 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)lib$(SOC).o
 
+SOBJS-$(CONFIG_SYS_COREBOOT) += car.o
+COBJS-$(CONFIG_SYS_COREBOOT) += coreboot.o
 COBJS-$(CONFIG_SYS_COREBOOT) += tables.o
 COBJS-$(CONFIG_SYS_COREBOOT) += ipchecksum.o
 COBJS-$(CONFIG_SYS_COREBOOT) += sdram.o
-COBJS-$(CONFIG_SYS_COREBOOT) += sysinfo.o
-
-SOBJS-$(CONFIG_SYS_COREBOOT) += coreboot_car.o
+COBJS-$(CONFIG_SYS_COREBOOT) += timestamp.o
+COBJS-$(CONFIG_PCI) += pci.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/arch/x86/cpu/coreboot/coreboot_car.S b/arch/x86/cpu/coreboot/car.S
index 3cc2575..3cc2575 100644
--- a/arch/x86/cpu/coreboot/coreboot_car.S
+++ b/arch/x86/cpu/coreboot/car.S
diff --git a/board/BuS/eb_cpu5282/config.mk b/arch/x86/cpu/coreboot/config.mk
index 18fb84e..4858fc3 100644
--- a/board/BuS/eb_cpu5282/config.mk
+++ b/arch/x86/cpu/coreboot/config.mk
@@ -1,7 +1,5 @@
 #
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+# Copyright (c) 2012 The Chromium OS Authors.
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -22,6 +20,4 @@
 # MA 02111-1307 USA
 #
 
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFE000000
-endif
+CONFIG_ARCH_DEVICE_TREE := coreboot
diff --git a/board/chromebook-x86/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c
index 22a643c..9c9431e 100644
--- a/board/chromebook-x86/coreboot/coreboot.c
+++ b/arch/x86/cpu/coreboot/coreboot.c
@@ -26,13 +26,15 @@
 #include <asm/u-boot-x86.h>
 #include <flash.h>
 #include <netdev.h>
+#include <asm/msr.h>
+#include <asm/cache.h>
+#include <asm/io.h>
 #include <asm/arch-coreboot/tables.h>
 #include <asm/arch-coreboot/sysinfo.h>
+#include <asm/arch/timestamp.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
-
 /*
  * Miscellaneous platform dependent initializations
  */
@@ -41,6 +43,9 @@ int cpu_init_f(void)
 	int ret = get_coreboot_info(&lib_sysinfo);
 	if (ret != 0)
 		printf("Failed to parse coreboot tables.\n");
+
+	timestamp_init();
+
 	return ret;
 }
 
@@ -62,8 +67,29 @@ int board_early_init_r(void)
 
 void show_boot_progress(int val)
 {
-}
+#if MIN_PORT80_KCLOCKS_DELAY
+	static uint32_t prev_stamp;
+	static uint32_t base;
+
+	/*
+	 * Scale the time counter reading to avoid using 64 bit arithmetics.
+	 * Can't use get_timer() here becuase it could be not yet
+	 * initialized or even implemented.
+	 */
+	if (!prev_stamp) {
+		base = rdtsc() / 1000;
+		prev_stamp = 0;
+	} else {
+		uint32_t now;
 
+		do {
+			now = rdtsc() / 1000 - base;
+		} while (now < (prev_stamp + MIN_PORT80_KCLOCKS_DELAY));
+		prev_stamp = now;
+	}
+#endif
+	outb(val, 0x80);
+}
 
 int last_stage_init(void)
 {
@@ -82,6 +108,33 @@ int board_eth_init(bd_t *bis)
 	return pci_eth_init(bis);
 }
 
-void setup_pcat_compatibility()
+#define MTRR_TYPE_WP          5
+#define MTRRcap_MSR           0xfe
+#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
+#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
+
+int board_final_cleanup(void)
 {
+	/* Un-cache the ROM so the kernel has one
+	 * more MTRR available.
+	 *
+	 * Coreboot should have assigned this to the
+	 * top available variable MTRR.
+	 */
+	u8 top_mtrr = (native_read_msr(MTRRcap_MSR) & 0xff) - 1;
+	u8 top_type = native_read_msr(MTRRphysBase_MSR(top_mtrr)) & 0xff;
+
+	/* Make sure this MTRR is the correct Write-Protected type */
+	if (top_type == MTRR_TYPE_WP) {
+		disable_caches();
+		wrmsrl(MTRRphysBase_MSR(top_mtrr), 0);
+		wrmsrl(MTRRphysMask_MSR(top_mtrr), 0);
+		enable_caches();
+	}
+
+	/* Issue SMI to Coreboot to lock down ME and registers */
+	printf("Finalizing Coreboot\n");
+	outb(0xcb, 0xb2);
+
+	return 0;
 }
diff --git a/arch/x86/cpu/coreboot/pci.c b/arch/x86/cpu/coreboot/pci.c
new file mode 100644
index 0000000..8f94167
--- /dev/null
+++ b/arch/x86/cpu/coreboot/pci.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2008,2009
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/pci.h>
+
+static struct pci_controller coreboot_hose;
+
+static void config_pci_bridge(struct pci_controller *hose, pci_dev_t dev,
+			      struct pci_config_table *table)
+{
+	u8 secondary;
+	hose->read_byte(hose, dev, PCI_SECONDARY_BUS, &secondary);
+	hose->last_busno = max(hose->last_busno, secondary);
+	pci_hose_scan_bus(hose, secondary);
+}
+
+static struct pci_config_table pci_coreboot_config_table[] = {
+	/* vendor, device, class, bus, dev, func */
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI,
+		PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, &config_pci_bridge },
+	{}
+};
+
+void pci_init_board(void)
+{
+	coreboot_hose.config_table = pci_coreboot_config_table;
+	coreboot_hose.first_busno = 0;
+	coreboot_hose.last_busno = 0;
+
+	pci_set_region(coreboot_hose.regions + 0, 0x0, 0x0, 0xffffffff,
+		PCI_REGION_MEM);
+	coreboot_hose.region_count = 1;
+
+	pci_setup_type1(&coreboot_hose);
+
+	pci_register_hose(&coreboot_hose);
+
+	pci_hose_scan(&coreboot_hose);
+}
diff --git a/arch/x86/cpu/coreboot/sdram.c b/arch/x86/cpu/coreboot/sdram.c
index f8fdac6..76274cb 100644
--- a/arch/x86/cpu/coreboot/sdram.c
+++ b/arch/x86/cpu/coreboot/sdram.c
@@ -27,8 +27,9 @@
 #include <asm/e820.h>
 #include <asm/u-boot-x86.h>
 #include <asm/global_data.h>
-#include <asm/arch-coreboot/sysinfo.h>
-#include <asm/arch-coreboot/tables.h>
+#include <asm/processor.h>
+#include <asm/arch/sysinfo.h>
+#include <asm/arch/tables.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -51,6 +52,58 @@ unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
 	return num_entries;
 }
 
+/*
+ * This function looks for the highest region of memory lower than 4GB which
+ * has enough space for U-Boot where U-Boot is aligned on a page boundary. It
+ * overrides the default implementation found elsewhere which simply picks the
+ * end of ram, wherever that may be. The location of the stack, the relocation
+ * address, and how far U-Boot is moved by relocation are set in the global
+ * data structure.
+ */
+int calculate_relocation_address(void)
+{
+	const uint64_t uboot_size = (uintptr_t)&__bss_end -
+			(uintptr_t)&__text_start;
+	const uint64_t total_size = uboot_size + CONFIG_SYS_MALLOC_LEN +
+		CONFIG_SYS_STACK_SIZE;
+	uintptr_t dest_addr = 0;
+	int i;
+
+	for (i = 0; i < lib_sysinfo.n_memranges; i++) {
+		struct memrange *memrange = &lib_sysinfo.memrange[i];
+		/* Force U-Boot to relocate to a page aligned address. */
+		uint64_t start = roundup(memrange->base, 1 << 12);
+		uint64_t end = memrange->base + memrange->size;
+
+		/* Ignore non-memory regions. */
+		if (memrange->type != CB_MEM_RAM)
+			continue;
+
+		/* Filter memory over 4GB. */
+		if (end > 0xffffffffULL)
+			end = 0x100000000ULL;
+		/* Skip this region if it's too small. */
+		if (end - start < total_size)
+			continue;
+
+		/* Use this address if it's the largest so far. */
+		if (end - uboot_size > dest_addr)
+			dest_addr = end;
+	}
+
+	/* If no suitable area was found, return an error. */
+	if (!dest_addr)
+		return 1;
+
+	dest_addr -= uboot_size;
+	dest_addr &= ~((1 << 12) - 1);
+	gd->relocaddr = dest_addr;
+	gd->reloc_off = dest_addr - (uintptr_t)&__text_start;
+	gd->start_addr_sp = dest_addr - CONFIG_SYS_MALLOC_LEN;
+
+	return 0;
+}
+
 int dram_init_f(void)
 {
 	int i;
@@ -71,5 +124,20 @@ int dram_init_f(void)
 
 int dram_init(void)
 {
+	int i, j;
+
+	if (CONFIG_NR_DRAM_BANKS) {
+		for (i = 0, j = 0; i < lib_sysinfo.n_memranges; i++) {
+			struct memrange *memrange = &lib_sysinfo.memrange[i];
+
+			if (memrange->type == CB_MEM_RAM) {
+				gd->bd->bi_dram[j].start = memrange->base;
+				gd->bd->bi_dram[j].size = memrange->size;
+				j++;
+				if (j >= CONFIG_NR_DRAM_BANKS)
+					break;
+			}
+		}
+	}
 	return 0;
 }
diff --git a/arch/x86/cpu/coreboot/sysinfo.c b/arch/x86/cpu/coreboot/sysinfo.c
deleted file mode 100644
index 9b3e660..0000000
--- a/arch/x86/cpu/coreboot/sysinfo.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is part of the libpayload project.
- *
- * Copyright (C) 2008 Advanced Micro Devices, Inc.
- * Copyright (C) 2009 coresystems GmbH
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <asm/arch-coreboot/sysinfo.h>
-
-/*
- * This needs to be in the .data section so that it's copied over during
- * relocation. By default it's put in the .bss section which is simply filled
- * with zeroes when transitioning from "ROM", which is really RAM, to other
- * RAM.
- */
-struct sysinfo_t lib_sysinfo __attribute__((section(".data")));
diff --git a/arch/x86/cpu/coreboot/tables.c b/arch/x86/cpu/coreboot/tables.c
index 0e3451b..b116d59 100644
--- a/arch/x86/cpu/coreboot/tables.c
+++ b/arch/x86/cpu/coreboot/tables.c
@@ -28,11 +28,20 @@
  * SUCH DAMAGE.
  */
 
+#include <common.h>
 #include <asm/arch-coreboot/ipchecksum.h>
 #include <asm/arch-coreboot/sysinfo.h>
 #include <asm/arch-coreboot/tables.h>
 
 /*
+ * This needs to be in the .data section so that it's copied over during
+ * relocation. By default it's put in the .bss section which is simply filled
+ * with zeroes when transitioning from "ROM", which is really RAM, to other
+ * RAM.
+ */
+struct sysinfo_t lib_sysinfo __attribute__((section(".data")));
+
+/*
  * Some of this is x86 specific, and the rest of it is generic. Right now,
  * since we only support x86, we'll avoid trying to make lots of infrastructure
  * we don't need. If in the future, we want to use coreboot on some other
@@ -72,22 +81,45 @@ static void cb_parse_memory(unsigned char *ptr, struct sysinfo_t *info)
 static void cb_parse_serial(unsigned char *ptr, struct sysinfo_t *info)
 {
 	struct cb_serial *ser = (struct cb_serial *)ptr;
-	if (ser->type != CB_SERIAL_TYPE_IO_MAPPED)
-		return;
-	info->ser_ioport = ser->baseaddr;
+	info->serial = ser;
 }
 
-static void cb_parse_optiontable(unsigned char *ptr, struct sysinfo_t *info)
+static void cb_parse_vbnv(unsigned char *ptr, struct sysinfo_t *info)
 {
-	info->option_table = (struct cb_cmos_option_table *)ptr;
+	struct cb_vbnv *vbnv = (struct cb_vbnv *)ptr;
+
+	info->vbnv_start = vbnv->vbnv_start;
+	info->vbnv_size = vbnv->vbnv_size;
 }
 
-static void cb_parse_checksum(unsigned char *ptr, struct sysinfo_t *info)
+static void cb_parse_gpios(unsigned char *ptr, struct sysinfo_t *info)
 {
-	struct cb_cmos_checksum *cmos_cksum = (struct cb_cmos_checksum *)ptr;
-	info->cmos_range_start = cmos_cksum->range_start;
-	info->cmos_range_end = cmos_cksum->range_end;
-	info->cmos_checksum_location = cmos_cksum->location;
+	int i;
+	struct cb_gpios *gpios = (struct cb_gpios *)ptr;
+
+	info->num_gpios = (gpios->count < SYSINFO_MAX_GPIOS) ?
+				(gpios->count) : SYSINFO_MAX_GPIOS;
+
+	for (i = 0; i < info->num_gpios; i++)
+		info->gpios[i] = gpios->gpios[i];
+}
+
+static void cb_parse_vdat(unsigned char *ptr, struct sysinfo_t *info)
+{
+	struct cb_vdat *vdat = (struct cb_vdat *) ptr;
+
+	info->vdat_addr = vdat->vdat_addr;
+	info->vdat_size = vdat->vdat_size;
+}
+
+static void cb_parse_tstamp(unsigned char *ptr, struct sysinfo_t *info)
+{
+	info->tstamp_table = ((struct cb_cbmem_tab *)ptr)->cbmem_tab;
+}
+
+static void cb_parse_cbmem_cons(unsigned char *ptr, struct sysinfo_t *info)
+{
+	info->cbmem_cons = ((struct cb_cbmem_tab *)ptr)->cbmem_tab;
 }
 
 static void cb_parse_framebuffer(unsigned char *ptr, struct sysinfo_t *info)
@@ -95,6 +127,11 @@ static void cb_parse_framebuffer(unsigned char *ptr, struct sysinfo_t *info)
 	info->framebuffer = (struct cb_framebuffer *)ptr;
 }
 
+static void cb_parse_string(unsigned char *ptr, char **info)
+{
+	*info = (char *)((struct cb_string *)ptr)->string;
+}
+
 static int cb_parse_header(void *addr, int len, struct sysinfo_t *info)
 {
 	struct cb_header *header;
@@ -125,6 +162,9 @@ static int cb_parse_header(void *addr, int len, struct sysinfo_t *info)
 	/* Now, walk the tables. */
 	ptr += header->header_bytes;
 
+	/* Inintialize some fields to sentinel values. */
+	info->vbnv_start = info->vbnv_size = (uint32_t)(-1);
+
 	for (i = 0; i < header->table_entries; i++) {
 		struct cb_record *rec = (struct cb_record *)ptr;
 
@@ -142,11 +182,35 @@ static int cb_parse_header(void *addr, int len, struct sysinfo_t *info)
 		case CB_TAG_SERIAL:
 			cb_parse_serial(ptr, info);
 			break;
-		case CB_TAG_CMOS_OPTION_TABLE:
-			cb_parse_optiontable(ptr, info);
+		case CB_TAG_VERSION:
+			cb_parse_string(ptr, &info->version);
+			break;
+		case CB_TAG_EXTRA_VERSION:
+			cb_parse_string(ptr, &info->extra_version);
+			break;
+		case CB_TAG_BUILD:
+			cb_parse_string(ptr, &info->build);
+			break;
+		case CB_TAG_COMPILE_TIME:
+			cb_parse_string(ptr, &info->compile_time);
+			break;
+		case CB_TAG_COMPILE_BY:
+			cb_parse_string(ptr, &info->compile_by);
+			break;
+		case CB_TAG_COMPILE_HOST:
+			cb_parse_string(ptr, &info->compile_host);
+			break;
+		case CB_TAG_COMPILE_DOMAIN:
+			cb_parse_string(ptr, &info->compile_domain);
+			break;
+		case CB_TAG_COMPILER:
+			cb_parse_string(ptr, &info->compiler);
 			break;
-		case CB_TAG_OPTION_CHECKSUM:
-			cb_parse_checksum(ptr, info);
+		case CB_TAG_LINKER:
+			cb_parse_string(ptr, &info->linker);
+			break;
+		case CB_TAG_ASSEMBLER:
+			cb_parse_string(ptr, &info->assembler);
 			break;
 		/*
 		 * FIXME we should warn on serial if coreboot set up a
@@ -155,6 +219,21 @@ static int cb_parse_header(void *addr, int len, struct sysinfo_t *info)
 		case CB_TAG_FRAMEBUFFER:
 			cb_parse_framebuffer(ptr, info);
 			break;
+		case CB_TAG_GPIO:
+			cb_parse_gpios(ptr, info);
+			break;
+		case CB_TAG_VDAT:
+			cb_parse_vdat(ptr, info);
+			break;
+		case CB_TAG_TIMESTAMPS:
+			cb_parse_tstamp(ptr, info);
+			break;
+		case CB_TAG_CBMEM_CONSOLE:
+			cb_parse_cbmem_cons(ptr, info);
+			break;
+		case CB_TAG_VBNV:
+			cb_parse_vbnv(ptr, info);
+			break;
 		}
 
 		ptr += rec->size;
@@ -166,18 +245,12 @@ static int cb_parse_header(void *addr, int len, struct sysinfo_t *info)
 /* == Architecture specific == */
 /* This is the x86 specific stuff. */
 
-/* Assume no translation or that memory is identity mapped. */
-static void *phys_to_virt(unsigned long virt)
-{
-	return (void *)(uintptr_t)virt;
-}
-
 int get_coreboot_info(struct sysinfo_t *info)
 {
-	int ret = cb_parse_header(phys_to_virt(0x00000000), 0x1000, info);
+	int ret = cb_parse_header((void *)0x00000000, 0x1000, info);
 
 	if (ret != 1)
-		ret = cb_parse_header(phys_to_virt(0x000f0000), 0x1000, info);
+		ret = cb_parse_header((void *)0x000f0000, 0x1000, info);
 
 	return (ret == 1) ? 0 : -1;
 }
diff --git a/arch/x86/cpu/coreboot/timestamp.c b/arch/x86/cpu/coreboot/timestamp.c
new file mode 100644
index 0000000..2ca7a57
--- /dev/null
+++ b/arch/x86/cpu/coreboot/timestamp.c
@@ -0,0 +1,61 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/arch/timestamp.h>
+#include <asm/arch/sysinfo.h>
+#include <linux/compiler.h>
+
+struct timestamp_entry {
+	uint32_t	entry_id;
+	uint64_t	entry_stamp;
+} __packed;
+
+struct timestamp_table {
+	uint64_t	base_time;
+	uint32_t	max_entries;
+	uint32_t	num_entries;
+	struct timestamp_entry entries[0]; /* Variable number of entries */
+} __packed;
+
+static struct timestamp_table *ts_table  __attribute__((section(".data")));
+
+void timestamp_init(void)
+{
+	ts_table = lib_sysinfo.tstamp_table;
+	timer_set_tsc_base(ts_table->base_time);
+	timestamp_add_now(TS_U_BOOT_INITTED);
+}
+
+void timestamp_add(enum timestamp_id id, uint64_t ts_time)
+{
+	struct timestamp_entry *tse;
+
+	if (!ts_table || (ts_table->num_entries == ts_table->max_entries))
+		return;
+
+	tse = &ts_table->entries[ts_table->num_entries++];
+	tse->entry_id = id;
+	tse->entry_stamp = ts_time - ts_table->base_time;
+}
+
+void timestamp_add_now(enum timestamp_id id)
+{
+	timestamp_add(id, rdtsc());
+}
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index e9bb0d7..315e87a 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -34,6 +34,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <asm/control_regs.h>
 #include <asm/processor.h>
 #include <asm/processor-flags.h>
 #include <asm/interrupt.h>
@@ -90,12 +91,6 @@ static void load_gdt(const u64 *boot_gdt, u16 num_entries)
 	asm volatile("lgdtl %0\n" : : "m" (gdt));
 }
 
-void init_gd(gd_t *id, u64 *gdt_addr)
-{
-	id->gd_addr = (ulong)id;
-	setup_gdt(id, gdt_addr);
-}
-
 void setup_gdt(gd_t *id, u64 *gdt_addr)
 {
 	/* CS: code, read/execute, 4 GB, base 0 */
@@ -121,6 +116,11 @@ void setup_gdt(gd_t *id, u64 *gdt_addr)
 	load_fs(X86_GDT_ENTRY_32BIT_FS);
 }
 
+int __weak x86_cleanup_before_linux(void)
+{
+	return 0;
+}
+
 int x86_cpu_init_f(void)
 {
 	const u32 em_rst = ~X86_CR0_EM;
@@ -148,16 +148,27 @@ int cpu_init_r(void) __attribute__((weak, alias("x86_cpu_init_r")));
 
 void x86_enable_caches(void)
 {
-	const u32 nw_cd_rst = ~(X86_CR0_NW | X86_CR0_CD);
+	unsigned long cr0;
 
-	/* turn on the cache and disable write through */
-	asm("movl	%%cr0, %%eax\n"
-	    "andl	%0, %%eax\n"
-	    "movl	%%eax, %%cr0\n"
-	    "wbinvd\n" : : "i" (nw_cd_rst) : "eax");
+	cr0 = read_cr0();
+	cr0 &= ~(X86_CR0_NW | X86_CR0_CD);
+	write_cr0(cr0);
+	wbinvd();
 }
 void enable_caches(void) __attribute__((weak, alias("x86_enable_caches")));
 
+void x86_disable_caches(void)
+{
+	unsigned long cr0;
+
+	cr0 = read_cr0();
+	cr0 |= X86_CR0_NW | X86_CR0_CD;
+	wbinvd();
+	write_cr0(cr0);
+	wbinvd();
+}
+void disable_caches(void) __attribute__((weak, alias("x86_disable_caches")));
+
 int x86_init_cache(void)
 {
 	enable_caches();
@@ -201,3 +212,17 @@ void __reset_cpu(ulong addr)
 	generate_gpf();			/* start the show */
 }
 void reset_cpu(ulong addr) __attribute__((weak, alias("__reset_cpu")));
+
+int dcache_status(void)
+{
+	return !(read_cr0() & 0x40000000);
+}
+
+/* Define these functions to allow ehch-hcd to function */
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+}
diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c
index 43ec3f8..dd30a05 100644
--- a/arch/x86/cpu/interrupts.c
+++ b/arch/x86/cpu/interrupts.c
@@ -28,10 +28,14 @@
  */
 
 #include <common.h>
+#include <asm/cache.h>
+#include <asm/control_regs.h>
 #include <asm/interrupt.h>
 #include <asm/io.h>
 #include <asm/processor-flags.h>
 #include <linux/compiler.h>
+#include <asm/msr.h>
+#include <asm/u-boot-x86.h>
 
 #define DECLARE_INTERRUPT(x) \
 	".globl irq_"#x"\n" \
@@ -41,72 +45,6 @@
 	"pushl $"#x"\n" \
 	"jmp irq_common_entry\n"
 
-/*
- * Volatile isn't enough to prevent the compiler from reordering the
- * read/write functions for the control registers and messing everything up.
- * A memory clobber would solve the problem, but would prevent reordering of
- * all loads stores around it, which can hurt performance. Solution is to
- * use a variable and mimic reads and writes to it to enforce serialisation
- */
-static unsigned long __force_order;
-
-static inline unsigned long read_cr0(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline unsigned long read_cr2(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline unsigned long read_cr3(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline unsigned long read_cr4(void)
-{
-	unsigned long val;
-	asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline unsigned long get_debugreg(int regno)
-{
-	unsigned long val = 0;	/* Damn you, gcc! */
-
-	switch (regno) {
-	case 0:
-		asm("mov %%db0, %0" : "=r" (val));
-		break;
-	case 1:
-		asm("mov %%db1, %0" : "=r" (val));
-		break;
-	case 2:
-		asm("mov %%db2, %0" : "=r" (val));
-		break;
-	case 3:
-		asm("mov %%db3, %0" : "=r" (val));
-		break;
-	case 6:
-		asm("mov %%db6, %0" : "=r" (val));
-		break;
-	case 7:
-		asm("mov %%db7, %0" : "=r" (val));
-		break;
-	default:
-		val = 0;
-	}
-	return val;
-}
-
 void dump_regs(struct irq_regs *regs)
 {
 	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
@@ -679,3 +617,32 @@ asm(".globl irq_common_entry\n" \
 	DECLARE_INTERRUPT(253) \
 	DECLARE_INTERRUPT(254) \
 	DECLARE_INTERRUPT(255));
+
+#if defined(CONFIG_INTEL_CORE_ARCH)
+/*
+ * Get the number of CPU time counter ticks since it was read first time after
+ * restart. This yields a free running counter guaranteed to take almost 6
+ * years to wrap around even at 100GHz clock rate.
+ */
+u64 get_ticks(void)
+{
+	static u64 tick_base;
+	u64 now_tick = rdtsc();
+
+	if (!tick_base)
+		tick_base = now_tick;
+
+	return now_tick - tick_base;
+}
+
+#define PLATFORM_INFO_MSR 0xce
+
+unsigned long get_tbclk(void)
+{
+	u32 ratio;
+	u64 platform_info = native_read_msr(PLATFORM_INFO_MSR);
+
+	ratio = (platform_info >> 8) & 0xff;
+	return 100 * 1000 * 1000 * ratio; /* 100MHz times Max Non Turbo ratio */
+}
+#endif
diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
index ee0dabe..e960e21 100644
--- a/arch/x86/cpu/start.S
+++ b/arch/x86/cpu/start.S
@@ -55,8 +55,16 @@ _x86boot_start:
 	movl	%eax, %cr0
 	wbinvd
 
+	/* Tell 32-bit code it is being entered from an in-RAM copy */
+	movw	$GD_FLG_WARM_BOOT, %bx
+	jmp	1f
 _start:
-	/* This is the 32-bit cold-reset entry point */
+	/*
+	 * This is the 32-bit cold-reset entry point. Initialize %bx to 0
+	 * in case we're preceeded by some sort of boot stub.
+	 */
+	movw	$GD_FLG_COLD_BOOT, %bx
+1:
 
 	/* Load the segement registes to match the gdt loaded in start16.S */
 	movl	$(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax
@@ -83,13 +91,33 @@ car_init_ret:
 	 * or fully initialised SDRAM - we really don't care which)
 	 * starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
 	 */
-	movl	$CONFIG_SYS_INIT_SP_ADDR, %esp
 
-	/* Initialise the Global Data Pointer */
-	movl	$CONFIG_SYS_INIT_GD_ADDR, %eax
-	movl	%eax, %edx
-	addl	$GENERATED_GBL_DATA_SIZE, %edx
-	call	init_gd;
+	/* Stack grows down from top of CAR */
+	movl	$(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE), %esp
+
+	/* Reserve space on stack for global data */
+	subl	$GENERATED_GBL_DATA_SIZE, %esp
+
+	/* Align global data to 16-byte boundary */
+	andl	$0xfffffff0, %esp
+
+	/* Setup first parameter to setup_gdt */
+	movl	%esp, %eax
+
+	/* Reserve space for global descriptor table */
+	subl	$X86_GDT_SIZE, %esp
+
+	/* Align temporary global descriptor table to 16-byte boundary */
+	andl	$0xfffffff0, %esp
+
+	/* Set second parameter to setup_gdt */
+	movl	%esp, %edx
+
+	/* gd->gd_addr = gd (Required to allow gd->xyz to work) */
+	movl	%eax, (%eax)
+
+	/* Setup global descriptor table so gd->xyz works */
+	call	setup_gdt
 
 	/* Set parameter to board_init_f() to boot flags */
 	xorl	%eax, %eax
@@ -113,9 +141,42 @@ board_init_f_r_trampoline:
 	 * %eax = Address of top of new stack
 	 */
 
-	/* Setup stack in RAM */
+	/* Stack grows down from top of SDRAM */
 	movl	%eax, %esp
 
+	/* Reserve space on stack for global data */
+	subl	$GENERATED_GBL_DATA_SIZE, %esp
+
+	/* Align global data to 16-byte boundary */
+	andl	$0xfffffff0, %esp
+
+	/* Setup first parameter to memcpy (and setup_gdt) */
+	movl	%esp, %eax
+
+	/* Setup second parameter to memcpy */
+	fs movl 0, %edx
+
+	/* Set third parameter to memcpy */
+	movl	$GENERATED_GBL_DATA_SIZE, %ecx
+
+	/* Copy global data from CAR to SDRAM stack */
+	call	memcpy
+
+	/* Reserve space for global descriptor table */
+	subl	$X86_GDT_SIZE, %esp
+
+	/* Align global descriptor table to 16-byte boundary */
+	andl	$0xfffffff0, %esp
+
+	/* Set second parameter to setup_gdt */
+	movl	%esp, %edx
+
+	/* gd->gd_addr = gd (Required to allow gd->xyz to work) */
+	movl	%eax, (%eax)
+
+	/* Setup global descriptor table so gd->xyz works */
+	call	setup_gdt
+
 	/* Re-enter U-Boot by calling board_init_f_r */
 	call	board_init_f_r
 
diff --git a/arch/x86/cpu/start16.S b/arch/x86/cpu/start16.S
index cc393ff..603bf1d 100644
--- a/arch/x86/cpu/start16.S
+++ b/arch/x86/cpu/start16.S
@@ -37,6 +37,9 @@
 .code16
 .globl start16
 start16:
+	/* Set the Cold Boot / Hard Reset flag */
+	movl	$GD_FLG_COLD_BOOT, %ebx
+
 	/*
 	 * First we let the BSP do some early initialization
 	 * this code have to map the flash to its final position
diff --git a/arch/x86/cpu/timer.c b/arch/x86/cpu/timer.c
new file mode 100644
index 0000000..149109d
--- /dev/null
+++ b/arch/x86/cpu/timer.c
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ */
+
+#include <common.h>
+
+unsigned long timer_get_us(void)
+{
+	printf("timer_get_us used but not implemented.\n");
+	return 0;
+}
diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds
index a1ecefa..0c6f0e3 100644
--- a/arch/x86/cpu/u-boot.lds
+++ b/arch/x86/cpu/u-boot.lds
@@ -86,6 +86,8 @@ SECTIONS
 	__bios_start = LOADADDR(.bios);
 	__bios_size = SIZEOF(.bios);
 
+#ifndef CONFIG_X86_NO_RESET_VECTOR
+
 	/*
 	 * The following expressions place the 16-bit Real-Mode code and
 	 * Reset Vector at the end of the Flash ROM
@@ -95,4 +97,5 @@ SECTIONS
 
 	. = RESET_VEC_LOC;
 	.resetvec : AT (CONFIG_SYS_TEXT_BASE + (CONFIG_SYS_MONITOR_LEN - RESET_SEG_SIZE + RESET_VEC_LOC)) { KEEP(*(.resetvec)); }
+#endif
 }
diff --git a/arch/x86/dts/coreboot.dtsi b/arch/x86/dts/coreboot.dtsi
new file mode 100644
index 0000000..4862a59
--- /dev/null
+++ b/arch/x86/dts/coreboot.dtsi
@@ -0,0 +1,16 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		console = "/serial";
+	};
+
+	serial {
+		compatible = "ns16550";
+		reg-shift = <1>;
+		io-mapped = <1>;
+		multiplier = <1>;
+		baudrate = <115200>;
+		status = "disabled";
+	};
+};
diff --git a/arch/x86/dts/skeleton.dtsi b/arch/x86/dts/skeleton.dtsi
new file mode 100644
index 0000000..b41d241
--- /dev/null
+++ b/arch/x86/dts/skeleton.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value.  The bootloader will typically populate the memory
+ * node.
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+	memory { device_type = "memory"; reg = <0 0>; };
+};
diff --git a/arch/x86/include/asm/arch-coreboot/sysinfo.h b/arch/x86/include/asm/arch-coreboot/sysinfo.h
index 5c44e1a..77ae304 100644
--- a/arch/x86/include/asm/arch-coreboot/sysinfo.h
+++ b/arch/x86/include/asm/arch-coreboot/sysinfo.h
@@ -30,32 +30,52 @@
 #ifndef _COREBOOT_SYSINFO_H
 #define _COREBOOT_SYSINFO_H
 
+#include <common.h>
 #include <compiler.h>
+#include <fdt.h>
+#include <asm/arch/tables.h>
 
 /* Allow a maximum of 16 memory range definitions. */
 #define SYSINFO_MAX_MEM_RANGES 16
+/* Allow a maximum of 8 GPIOs */
+#define SYSINFO_MAX_GPIOS 8
 
 struct sysinfo_t {
-	unsigned int cpu_khz;
-	unsigned short ser_ioport;
-	unsigned long ser_base; /* for mmapped serial */
-
 	int n_memranges;
-
 	struct memrange {
 		unsigned long long base;
 		unsigned long long size;
 		unsigned int type;
 	} memrange[SYSINFO_MAX_MEM_RANGES];
 
-	struct cb_cmos_option_table *option_table;
 	u32 cmos_range_start;
 	u32 cmos_range_end;
 	u32 cmos_checksum_location;
+	u32 vbnv_start;
+	u32 vbnv_size;
+
+	char *version;
+	char *extra_version;
+	char *build;
+	char *compile_time;
+	char *compile_by;
+	char *compile_host;
+	char *compile_domain;
+	char *compiler;
+	char *linker;
+	char *assembler;
 
 	struct cb_framebuffer *framebuffer;
 
-	unsigned long *mbtable; /** Pointer to the multiboot table */
+	int num_gpios;
+	struct cb_gpio gpios[SYSINFO_MAX_GPIOS];
+
+	void	*vdat_addr;
+	u32	vdat_size;
+	void	*tstamp_table;
+	void	*cbmem_cons;
+
+	struct cb_serial *serial;
 };
 
 extern struct sysinfo_t lib_sysinfo;
diff --git a/arch/x86/include/asm/arch-coreboot/tables.h b/arch/x86/include/asm/arch-coreboot/tables.h
index c286973..ad34a8b 100644
--- a/arch/x86/include/asm/arch-coreboot/tables.h
+++ b/arch/x86/include/asm/arch-coreboot/tables.h
@@ -164,6 +164,55 @@ struct cb_framebuffer {
 	u8 reserved_mask_size;
 };
 
+#define CB_TAG_GPIO 0x0013
+#define GPIO_MAX_NAME_LENGTH 16
+struct cb_gpio {
+	u32 port;
+	u32 polarity;
+	u32 value;
+	u8 name[GPIO_MAX_NAME_LENGTH];
+};
+
+struct cb_gpios {
+	u32 tag;
+	u32 size;
+
+	u32 count;
+	struct cb_gpio gpios[0];
+};
+
+#define CB_TAG_FDT	0x0014
+struct cb_fdt {
+	uint32_t tag;
+	uint32_t size;	/* size of the entire entry */
+	/* the actual FDT gets placed here */
+};
+
+#define CB_TAG_VDAT	0x0015
+struct cb_vdat {
+	uint32_t tag;
+	uint32_t size;	/* size of the entire entry */
+	void	 *vdat_addr;
+	uint32_t vdat_size;
+};
+
+#define CB_TAG_TIMESTAMPS	0x0016
+#define CB_TAG_CBMEM_CONSOLE	0x0017
+#define CB_TAG_MRC_CACHE	0x0018
+struct cb_cbmem_tab {
+	uint32_t tag;
+	uint32_t size;
+	void   *cbmem_tab;
+};
+
+#define CB_TAG_VBNV		0x0019
+struct cb_vbnv {
+	uint32_t tag;
+	uint32_t size;
+	uint32_t vbnv_start;
+	uint32_t vbnv_size;
+};
+
 #define CB_TAG_CMOS_OPTION_TABLE 0x00c8
 struct cb_cmos_option_table {
 	u32 tag;
@@ -238,4 +287,29 @@ struct sysinfo_t;
 
 int get_coreboot_info(struct sysinfo_t *info);
 
+#define CBMEM_TOC_RESERVED      512
+#define MAX_CBMEM_ENTRIES       16
+#define CBMEM_MAGIC             0x434f5245
+
+struct cbmem_entry {
+	u32 magic;
+	u32 id;
+	u64 base;
+	u64 size;
+} __packed;
+
+#define CBMEM_ID_FREESPACE      0x46524545
+#define CBMEM_ID_GDT            0x4c474454
+#define CBMEM_ID_ACPI           0x41435049
+#define CBMEM_ID_CBTABLE        0x43425442
+#define CBMEM_ID_PIRQ           0x49525154
+#define CBMEM_ID_MPTABLE        0x534d5054
+#define CBMEM_ID_RESUME         0x5245534d
+#define CBMEM_ID_RESUME_SCRATCH 0x52455343
+#define CBMEM_ID_SMBIOS         0x534d4254
+#define CBMEM_ID_TIMESTAMP      0x54494d45
+#define CBMEM_ID_MRCDATA        0x4d524344
+#define CBMEM_ID_CONSOLE        0x434f4e53
+#define CBMEM_ID_NONE           0x00000000
+
 #endif
diff --git a/arch/x86/include/asm/arch-coreboot/timestamp.h b/arch/x86/include/asm/arch-coreboot/timestamp.h
new file mode 100644
index 0000000..d104912
--- /dev/null
+++ b/arch/x86/include/asm/arch-coreboot/timestamp.h
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
+ */
+
+#ifndef __COREBOOT_TIMESTAMP_H__
+#define __COREBOOT_TIMESTAMP_H__
+
+enum timestamp_id {
+	/* coreboot specific timestamp IDs */
+	TS_START_ROMSTAGE = 1,
+	TS_BEFORE_INITRAM = 2,
+	TS_AFTER_INITRAM = 3,
+	TS_END_ROMSTAGE = 4,
+	TS_START_COPYRAM = 8,
+	TS_END_COPYRAM = 9,
+	TS_START_RAMSTAGE = 10,
+	TS_DEVICE_ENUMERATE = 30,
+	TS_DEVICE_CONFIGURE = 40,
+	TS_DEVICE_ENABLE = 50,
+	TS_DEVICE_INITIALIZE = 60,
+	TS_DEVICE_DONE = 70,
+	TS_CBMEM_POST = 75,
+	TS_WRITE_TABLES = 80,
+	TS_LOAD_PAYLOAD = 90,
+	TS_ACPI_WAKE_JUMP = 98,
+	TS_SELFBOOT_JUMP = 99,
+
+	/* U-Boot entry IDs start at 1000 */
+	TS_U_BOOT_INITTED = 1000, /* This is where u-boot starts */
+	TS_U_BOOT_START_KERNEL = 1100, /* Right before jumping to kernel. */
+};
+
+void timestamp_init(void);
+void timestamp_add(enum timestamp_id id, uint64_t ts_time);
+void timestamp_add_now(enum timestamp_id id);
+
+#endif
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index c7a38f2..5a7e4cb 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -351,6 +351,11 @@ static __inline__ int ffs(int x)
 }
 #define PLATFORM_FFS
 
+static inline int __ilog2(unsigned int x)
+{
+	return generic_fls(x) - 1;
+}
+
 /**
  * hweightN - returns the hamming weight of a N-bit word
  * @x: the word to weigh
diff --git a/arch/x86/include/asm/cache.h b/arch/x86/include/asm/cache.h
index 87c9e0b..d4678d4 100644
--- a/arch/x86/include/asm/cache.h
+++ b/arch/x86/include/asm/cache.h
@@ -32,4 +32,20 @@
 #define ARCH_DMA_MINALIGN	64
 #endif
 
+static inline void wbinvd(void)
+{
+	asm volatile ("wbinvd" : : : "memory");
+}
+
+static inline void invd(void)
+{
+	asm volatile("invd" : : : "memory");
+}
+
+/* Enable caches and write buffer */
+void enable_caches(void);
+
+/* Disable caches and write buffer */
+void disable_caches(void);
+
 #endif /* __X86_CACHE_H__ */
diff --git a/arch/x86/include/asm/control_regs.h b/arch/x86/include/asm/control_regs.h
new file mode 100644
index 0000000..aa8be30
--- /dev/null
+++ b/arch/x86/include/asm/control_regs.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ *
+ * (C) Copyright 2008-2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * Portions of this file are derived from the Linux kernel source
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __X86_CONTROL_REGS_H
+#define __X86_CONTROL_REGS_H
+
+/*
+ * The memory clobber prevents the GCC from reordering the read/write order
+ * of CR0
+*/
+static inline unsigned long read_cr0(void)
+{
+	unsigned long val;
+
+	asm volatile ("movl %%cr0, %0" : "=r" (val) : : "memory");
+	return val;
+}
+
+static inline void write_cr0(unsigned long val)
+{
+	asm volatile ("movl %0, %%cr0" : : "r" (val) : "memory");
+}
+
+static inline unsigned long read_cr2(void)
+{
+	unsigned long val;
+
+	asm volatile("mov %%cr2,%0\n\t" : "=r" (val) : : "memory");
+	return val;
+}
+
+static inline unsigned long read_cr3(void)
+{
+	unsigned long val;
+
+	asm volatile("mov %%cr3,%0\n\t" : "=r" (val) : : "memory");
+	return val;
+}
+
+static inline unsigned long read_cr4(void)
+{
+	unsigned long val;
+
+	asm volatile("mov %%cr4,%0\n\t" : "=r" (val) : : "memory");
+	return val;
+}
+
+static inline unsigned long get_debugreg(int regno)
+{
+	unsigned long val = 0;  /* Damn you, gcc! */
+
+	switch (regno) {
+	case 0:
+		asm("mov %%db0, %0" : "=r" (val));
+		break;
+	case 1:
+		asm("mov %%db1, %0" : "=r" (val));
+		break;
+	case 2:
+		asm("mov %%db2, %0" : "=r" (val));
+		break;
+	case 3:
+		asm("mov %%db3, %0" : "=r" (val));
+		break;
+	case 6:
+		asm("mov %%db6, %0" : "=r" (val));
+		break;
+	case 7:
+		asm("mov %%db7, %0" : "=r" (val));
+		break;
+	default:
+		val = 0;
+	}
+	return val;
+}
+
+#endif
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
index bce999f..dc6402b 100644
--- a/arch/x86/include/asm/global_data.h
+++ b/arch/x86/include/asm/global_data.h
@@ -33,9 +33,13 @@
 
 #ifndef __ASSEMBLY__
 
-typedef	struct global_data {
+#include <asm/u-boot.h>
+
+typedef struct global_data gd_t;
+
+struct global_data {
 	/* NOTE: gd_addr MUST be first member of struct global_data! */
-	unsigned long	gd_addr;	/* Location of Global Data */
+	gd_t *gd_addr;	/* Location of Global Data */
 	bd_t		*bd;
 	unsigned long	flags;
 	unsigned int	baudrate;
@@ -52,12 +56,12 @@ typedef	struct global_data {
 	unsigned long	relocaddr;	/* Start address of U-Boot in RAM */
 	unsigned long	start_addr_sp;	/* start_addr_stackpointer */
 	unsigned long	gdt_addr;	/* Location of GDT */
-	unsigned long	new_gd_addr;	/* New location of Global Data */
 	phys_size_t	ram_size;	/* RAM size */
 	unsigned long	reset_status;	/* reset status register at boot */
+	const void	*fdt_blob;	/* Our device tree, NULL if none */
 	void		**jt;		/* jump table */
 	char		env_buf[32];	/* buffer for getenv() before reloc. */
-} gd_t;
+};
 
 static inline gd_t *get_fs_gd_ptr(void)
 {
@@ -74,6 +78,12 @@ static inline gd_t *get_fs_gd_ptr(void)
 
 #include <asm-generic/global_data_flags.h>
 
+/*
+ * Our private Global Data Flags
+ */
+#define GD_FLG_COLD_BOOT	0x00100	/* Cold Boot */
+#define GD_FLG_WARM_BOOT	0x00200	/* Warm Boot */
+
 #define DECLARE_GLOBAL_DATA_PTR
 
 #endif /* __ASM_GBL_DATA_H */
diff --git a/arch/nios2/include/asm/status_led.h b/arch/x86/include/asm/gpio.h
index 20f8d90..0a37a85 100644
--- a/arch/nios2/include/asm/status_led.h
+++ b/arch/x86/include/asm/gpio.h
@@ -1,7 +1,5 @@
 /*
- * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
+ * Copyright (c) 2012, Google Inc. All rights reserved.
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -20,12 +18,10 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-#ifndef __ASM_STATUS_LED_H__
-#define __ASM_STATUS_LED_H__
 
-typedef unsigned led_id_t;
-extern void __led_init (led_id_t mask, int state);
-extern void __led_set (led_id_t mask, int state);
-inline void __led_toggle (led_id_t mask);
+#ifndef _X86_GPIO_H_
+#define _X86_GPIO_H_
+
+#include <asm-generic/gpio.h>
 
-#endif	/* __ASM_STATUS_LED_H__ */
+#endif /* _X86_GPIO_H_ */
diff --git a/arch/x86/include/asm/init_helpers.h b/arch/x86/include/asm/init_helpers.h
index 8afb443..2f437e0 100644
--- a/arch/x86/include/asm/init_helpers.h
+++ b/arch/x86/include/asm/init_helpers.h
@@ -29,7 +29,6 @@ int display_dram_config(void);
 int init_baudrate_f(void);
 int calculate_relocation_address(void);
 
-int copy_gd_to_ram_f_r(void);
 int init_cache_f_r(void);
 
 int set_reloc_flag_r(void);
@@ -38,5 +37,6 @@ int init_bd_struct_r(void);
 int flash_init_r(void);
 int status_led_set_r(void);
 int set_load_addr_r(void);
+int init_func_spi(void);
 
 #endif	/* !_INIT_HELPERS_H_ */
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 9b757d4..86bac90 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_IO_H
 #define _ASM_IO_H
 
+#include <compiler.h>
+
 /*
  * This file contains the definitions for the x86 IO instructions
  * inb/inw/inl/outb/outw/outl and the "string versions" of the same
@@ -36,6 +38,8 @@
 
 #define IO_SPACE_LIMIT 0xffff
 
+#include <asm/types.h>
+
 
 #ifdef __KERNEL__
 
@@ -135,7 +139,7 @@ out:
 #ifdef SLOW_IO_BY_JUMPING
 #define __SLOW_DOWN_IO "\njmp 1f\n1:\tjmp 1f\n1:"
 #else
-#define __SLOW_DOWN_IO "\noutb %%al,$0x80"
+#define __SLOW_DOWN_IO "\noutb %%al,$0xed"
 #endif
 
 #ifdef REALLY_SLOW_IO
@@ -218,7 +222,7 @@ static inline void sync(void)
 static inline void *
 map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
 {
-	return (void *)paddr;
+	return (void *)(uintptr_t)paddr;
 }
 
 /*
@@ -231,7 +235,15 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 static inline phys_addr_t virt_to_phys(void * vaddr)
 {
-	return (phys_addr_t)(vaddr);
+	return (phys_addr_t)(uintptr_t)(vaddr);
 }
 
+/*
+ * TODO: The kernel offers some more advanced versions of barriers, it might
+ * have some advantages to use them instead of the simple one here.
+ */
+#define dmb()		__asm__ __volatile__ ("" : : : "memory")
+#define __iormb()	dmb()
+#define __iowmb()	dmb()
+
 #endif
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
new file mode 100644
index 0000000..5017599
--- /dev/null
+++ b/arch/x86/include/asm/msr-index.h
@@ -0,0 +1,469 @@
+/*
+ * Taken from the linux kernel file of the same name
+ *
+ * (C) Copyright 2012
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_X86_MSR_INDEX_H
+#define _ASM_X86_MSR_INDEX_H
+
+/* CPU model specific register (MSR) numbers */
+
+/* x86-64 specific MSRs */
+#define MSR_EFER		0xc0000080 /* extended feature register */
+#define MSR_STAR		0xc0000081 /* legacy mode SYSCALL target */
+#define MSR_LSTAR		0xc0000082 /* long mode SYSCALL target */
+#define MSR_CSTAR		0xc0000083 /* compat mode SYSCALL target */
+#define MSR_SYSCALL_MASK	0xc0000084 /* EFLAGS mask for syscall */
+#define MSR_FS_BASE		0xc0000100 /* 64bit FS base */
+#define MSR_GS_BASE		0xc0000101 /* 64bit GS base */
+#define MSR_KERNEL_GS_BASE	0xc0000102 /* SwapGS GS shadow */
+#define MSR_TSC_AUX		0xc0000103 /* Auxiliary TSC */
+
+/* EFER bits: */
+#define _EFER_SCE		0  /* SYSCALL/SYSRET */
+#define _EFER_LME		8  /* Long mode enable */
+#define _EFER_LMA		10 /* Long mode active (read-only) */
+#define _EFER_NX		11 /* No execute enable */
+#define _EFER_SVME		12 /* Enable virtualization */
+#define _EFER_LMSLE		13 /* Long Mode Segment Limit Enable */
+#define _EFER_FFXSR		14 /* Enable Fast FXSAVE/FXRSTOR */
+
+#define EFER_SCE		(1<<_EFER_SCE)
+#define EFER_LME		(1<<_EFER_LME)
+#define EFER_LMA		(1<<_EFER_LMA)
+#define EFER_NX			(1<<_EFER_NX)
+#define EFER_SVME		(1<<_EFER_SVME)
+#define EFER_LMSLE		(1<<_EFER_LMSLE)
+#define EFER_FFXSR		(1<<_EFER_FFXSR)
+
+/* Intel MSRs. Some also available on other CPUs */
+#define MSR_IA32_PERFCTR0		0x000000c1
+#define MSR_IA32_PERFCTR1		0x000000c2
+#define MSR_FSB_FREQ			0x000000cd
+
+#define MSR_NHM_SNB_PKG_CST_CFG_CTL	0x000000e2
+#define NHM_C3_AUTO_DEMOTE		(1UL << 25)
+#define NHM_C1_AUTO_DEMOTE		(1UL << 26)
+#define ATM_LNC_C6_AUTO_DEMOTE		(1UL << 25)
+
+#define MSR_MTRRcap			0x000000fe
+#define MSR_IA32_BBL_CR_CTL		0x00000119
+#define MSR_IA32_BBL_CR_CTL3		0x0000011e
+
+#define MSR_IA32_SYSENTER_CS		0x00000174
+#define MSR_IA32_SYSENTER_ESP		0x00000175
+#define MSR_IA32_SYSENTER_EIP		0x00000176
+
+#define MSR_IA32_MCG_CAP		0x00000179
+#define MSR_IA32_MCG_STATUS		0x0000017a
+#define MSR_IA32_MCG_CTL		0x0000017b
+
+#define MSR_OFFCORE_RSP_0		0x000001a6
+#define MSR_OFFCORE_RSP_1		0x000001a7
+
+#define MSR_IA32_PEBS_ENABLE		0x000003f1
+#define MSR_IA32_DS_AREA		0x00000600
+#define MSR_IA32_PERF_CAPABILITIES	0x00000345
+
+#define MSR_MTRRfix64K_00000		0x00000250
+#define MSR_MTRRfix16K_80000		0x00000258
+#define MSR_MTRRfix16K_A0000		0x00000259
+#define MSR_MTRRfix4K_C0000		0x00000268
+#define MSR_MTRRfix4K_C8000		0x00000269
+#define MSR_MTRRfix4K_D0000		0x0000026a
+#define MSR_MTRRfix4K_D8000		0x0000026b
+#define MSR_MTRRfix4K_E0000		0x0000026c
+#define MSR_MTRRfix4K_E8000		0x0000026d
+#define MSR_MTRRfix4K_F0000		0x0000026e
+#define MSR_MTRRfix4K_F8000		0x0000026f
+#define MSR_MTRRdefType			0x000002ff
+
+#define MSR_IA32_CR_PAT			0x00000277
+
+#define MSR_IA32_DEBUGCTLMSR		0x000001d9
+#define MSR_IA32_LASTBRANCHFROMIP	0x000001db
+#define MSR_IA32_LASTBRANCHTOIP		0x000001dc
+#define MSR_IA32_LASTINTFROMIP		0x000001dd
+#define MSR_IA32_LASTINTTOIP		0x000001de
+
+/* DEBUGCTLMSR bits (others vary by model): */
+#define DEBUGCTLMSR_LBR			(1UL <<  0)
+#define DEBUGCTLMSR_BTF			(1UL <<  1)
+#define DEBUGCTLMSR_TR			(1UL <<  6)
+#define DEBUGCTLMSR_BTS			(1UL <<  7)
+#define DEBUGCTLMSR_BTINT		(1UL <<  8)
+#define DEBUGCTLMSR_BTS_OFF_OS		(1UL <<  9)
+#define DEBUGCTLMSR_BTS_OFF_USR		(1UL << 10)
+#define DEBUGCTLMSR_FREEZE_LBRS_ON_PMI	(1UL << 11)
+
+#define MSR_IA32_MC0_CTL		0x00000400
+#define MSR_IA32_MC0_STATUS		0x00000401
+#define MSR_IA32_MC0_ADDR		0x00000402
+#define MSR_IA32_MC0_MISC		0x00000403
+
+#define MSR_AMD64_MC0_MASK		0xc0010044
+
+#define MSR_IA32_MCx_CTL(x)		(MSR_IA32_MC0_CTL + 4*(x))
+#define MSR_IA32_MCx_STATUS(x)		(MSR_IA32_MC0_STATUS + 4*(x))
+#define MSR_IA32_MCx_ADDR(x)		(MSR_IA32_MC0_ADDR + 4*(x))
+#define MSR_IA32_MCx_MISC(x)		(MSR_IA32_MC0_MISC + 4*(x))
+
+#define MSR_AMD64_MCx_MASK(x)		(MSR_AMD64_MC0_MASK + (x))
+
+/* These are consecutive and not in the normal 4er MCE bank block */
+#define MSR_IA32_MC0_CTL2		0x00000280
+#define MSR_IA32_MCx_CTL2(x)		(MSR_IA32_MC0_CTL2 + (x))
+
+#define MSR_P6_PERFCTR0			0x000000c1
+#define MSR_P6_PERFCTR1			0x000000c2
+#define MSR_P6_EVNTSEL0			0x00000186
+#define MSR_P6_EVNTSEL1			0x00000187
+
+/* AMD64 MSRs. Not complete. See the architecture manual for a more
+   complete list. */
+
+#define MSR_AMD64_PATCH_LEVEL		0x0000008b
+#define MSR_AMD64_NB_CFG		0xc001001f
+#define MSR_AMD64_PATCH_LOADER		0xc0010020
+#define MSR_AMD64_OSVW_ID_LENGTH	0xc0010140
+#define MSR_AMD64_OSVW_STATUS		0xc0010141
+#define MSR_AMD64_DC_CFG		0xc0011022
+#define MSR_AMD64_IBSFETCHCTL		0xc0011030
+#define MSR_AMD64_IBSFETCHLINAD		0xc0011031
+#define MSR_AMD64_IBSFETCHPHYSAD	0xc0011032
+#define MSR_AMD64_IBSOPCTL		0xc0011033
+#define MSR_AMD64_IBSOPRIP		0xc0011034
+#define MSR_AMD64_IBSOPDATA		0xc0011035
+#define MSR_AMD64_IBSOPDATA2		0xc0011036
+#define MSR_AMD64_IBSOPDATA3		0xc0011037
+#define MSR_AMD64_IBSDCLINAD		0xc0011038
+#define MSR_AMD64_IBSDCPHYSAD		0xc0011039
+#define MSR_AMD64_IBSCTL		0xc001103a
+#define MSR_AMD64_IBSBRTARGET		0xc001103b
+
+/* Fam 15h MSRs */
+#define MSR_F15H_PERF_CTL		0xc0010200
+#define MSR_F15H_PERF_CTR		0xc0010201
+
+/* Fam 10h MSRs */
+#define MSR_FAM10H_MMIO_CONF_BASE	0xc0010058
+#define FAM10H_MMIO_CONF_ENABLE		(1<<0)
+#define FAM10H_MMIO_CONF_BUSRANGE_MASK	0xf
+#define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
+#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffffULL
+#define FAM10H_MMIO_CONF_BASE_SHIFT	20
+#define MSR_FAM10H_NODE_ID		0xc001100c
+
+/* K8 MSRs */
+#define MSR_K8_TOP_MEM1			0xc001001a
+#define MSR_K8_TOP_MEM2			0xc001001d
+#define MSR_K8_SYSCFG			0xc0010010
+#define MSR_K8_INT_PENDING_MSG		0xc0010055
+/* C1E active bits in int pending message */
+#define K8_INTP_C1E_ACTIVE_MASK		0x18000000
+#define MSR_K8_TSEG_ADDR		0xc0010112
+#define K8_MTRRFIXRANGE_DRAM_ENABLE	0x00040000 /* MtrrFixDramEn bit    */
+#define K8_MTRRFIXRANGE_DRAM_MODIFY	0x00080000 /* MtrrFixDramModEn bit */
+#define K8_MTRR_RDMEM_WRMEM_MASK	0x18181818 /* Mask: RdMem|WrMem    */
+
+/* K7 MSRs */
+#define MSR_K7_EVNTSEL0			0xc0010000
+#define MSR_K7_PERFCTR0			0xc0010004
+#define MSR_K7_EVNTSEL1			0xc0010001
+#define MSR_K7_PERFCTR1			0xc0010005
+#define MSR_K7_EVNTSEL2			0xc0010002
+#define MSR_K7_PERFCTR2			0xc0010006
+#define MSR_K7_EVNTSEL3			0xc0010003
+#define MSR_K7_PERFCTR3			0xc0010007
+#define MSR_K7_CLK_CTL			0xc001001b
+#define MSR_K7_HWCR			0xc0010015
+#define MSR_K7_FID_VID_CTL		0xc0010041
+#define MSR_K7_FID_VID_STATUS		0xc0010042
+
+/* K6 MSRs */
+#define MSR_K6_WHCR			0xc0000082
+#define MSR_K6_UWCCR			0xc0000085
+#define MSR_K6_EPMR			0xc0000086
+#define MSR_K6_PSOR			0xc0000087
+#define MSR_K6_PFIR			0xc0000088
+
+/* Centaur-Hauls/IDT defined MSRs. */
+#define MSR_IDT_FCR1			0x00000107
+#define MSR_IDT_FCR2			0x00000108
+#define MSR_IDT_FCR3			0x00000109
+#define MSR_IDT_FCR4			0x0000010a
+
+#define MSR_IDT_MCR0			0x00000110
+#define MSR_IDT_MCR1			0x00000111
+#define MSR_IDT_MCR2			0x00000112
+#define MSR_IDT_MCR3			0x00000113
+#define MSR_IDT_MCR4			0x00000114
+#define MSR_IDT_MCR5			0x00000115
+#define MSR_IDT_MCR6			0x00000116
+#define MSR_IDT_MCR7			0x00000117
+#define MSR_IDT_MCR_CTRL		0x00000120
+
+/* VIA Cyrix defined MSRs*/
+#define MSR_VIA_FCR			0x00001107
+#define MSR_VIA_LONGHAUL		0x0000110a
+#define MSR_VIA_RNG			0x0000110b
+#define MSR_VIA_BCR2			0x00001147
+
+/* Transmeta defined MSRs */
+#define MSR_TMTA_LONGRUN_CTRL		0x80868010
+#define MSR_TMTA_LONGRUN_FLAGS		0x80868011
+#define MSR_TMTA_LRTI_READOUT		0x80868018
+#define MSR_TMTA_LRTI_VOLT_MHZ		0x8086801a
+
+/* Intel defined MSRs. */
+#define MSR_IA32_P5_MC_ADDR		0x00000000
+#define MSR_IA32_P5_MC_TYPE		0x00000001
+#define MSR_IA32_TSC			0x00000010
+#define MSR_IA32_PLATFORM_ID		0x00000017
+#define MSR_IA32_EBL_CR_POWERON		0x0000002a
+#define MSR_EBC_FREQUENCY_ID		0x0000002c
+#define MSR_IA32_FEATURE_CONTROL        0x0000003a
+
+#define FEATURE_CONTROL_LOCKED				(1<<0)
+#define FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX	(1<<1)
+#define FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX	(1<<2)
+
+#define MSR_IA32_APICBASE		0x0000001b
+#define MSR_IA32_APICBASE_BSP		(1<<8)
+#define MSR_IA32_APICBASE_ENABLE	(1<<11)
+#define MSR_IA32_APICBASE_BASE		(0xfffff<<12)
+
+#define MSR_IA32_UCODE_WRITE		0x00000079
+#define MSR_IA32_UCODE_REV		0x0000008b
+
+#define MSR_IA32_PERF_STATUS		0x00000198
+#define MSR_IA32_PERF_CTL		0x00000199
+
+#define MSR_IA32_MPERF			0x000000e7
+#define MSR_IA32_APERF			0x000000e8
+
+#define MSR_IA32_THERM_CONTROL		0x0000019a
+#define MSR_IA32_THERM_INTERRUPT	0x0000019b
+
+#define THERM_INT_HIGH_ENABLE		(1 << 0)
+#define THERM_INT_LOW_ENABLE		(1 << 1)
+#define THERM_INT_PLN_ENABLE		(1 << 24)
+
+#define MSR_IA32_THERM_STATUS		0x0000019c
+
+#define THERM_STATUS_PROCHOT		(1 << 0)
+#define THERM_STATUS_POWER_LIMIT	(1 << 10)
+
+#define MSR_THERM2_CTL			0x0000019d
+
+#define MSR_THERM2_CTL_TM_SELECT	(1ULL << 16)
+
+#define MSR_IA32_MISC_ENABLE		0x000001a0
+
+#define MSR_IA32_TEMPERATURE_TARGET	0x000001a2
+
+#define MSR_IA32_ENERGY_PERF_BIAS	0x000001b0
+
+#define MSR_IA32_PACKAGE_THERM_STATUS		0x000001b1
+
+#define PACKAGE_THERM_STATUS_PROCHOT		(1 << 0)
+#define PACKAGE_THERM_STATUS_POWER_LIMIT	(1 << 10)
+
+#define MSR_IA32_PACKAGE_THERM_INTERRUPT	0x000001b2
+
+#define PACKAGE_THERM_INT_HIGH_ENABLE		(1 << 0)
+#define PACKAGE_THERM_INT_LOW_ENABLE		(1 << 1)
+#define PACKAGE_THERM_INT_PLN_ENABLE		(1 << 24)
+
+/* Thermal Thresholds Support */
+#define THERM_INT_THRESHOLD0_ENABLE    (1 << 15)
+#define THERM_SHIFT_THRESHOLD0        8
+#define THERM_MASK_THRESHOLD0          (0x7f << THERM_SHIFT_THRESHOLD0)
+#define THERM_INT_THRESHOLD1_ENABLE    (1 << 23)
+#define THERM_SHIFT_THRESHOLD1        16
+#define THERM_MASK_THRESHOLD1          (0x7f << THERM_SHIFT_THRESHOLD1)
+#define THERM_STATUS_THRESHOLD0        (1 << 6)
+#define THERM_LOG_THRESHOLD0           (1 << 7)
+#define THERM_STATUS_THRESHOLD1        (1 << 8)
+#define THERM_LOG_THRESHOLD1           (1 << 9)
+
+/* MISC_ENABLE bits: architectural */
+#define MSR_IA32_MISC_ENABLE_FAST_STRING	(1ULL << 0)
+#define MSR_IA32_MISC_ENABLE_TCC		(1ULL << 1)
+#define MSR_IA32_MISC_ENABLE_EMON		(1ULL << 7)
+#define MSR_IA32_MISC_ENABLE_BTS_UNAVAIL	(1ULL << 11)
+#define MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL	(1ULL << 12)
+#define MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP	(1ULL << 16)
+#define MSR_IA32_MISC_ENABLE_MWAIT		(1ULL << 18)
+#define MSR_IA32_MISC_ENABLE_LIMIT_CPUID	(1ULL << 22)
+#define MSR_IA32_MISC_ENABLE_XTPR_DISABLE	(1ULL << 23)
+#define MSR_IA32_MISC_ENABLE_XD_DISABLE		(1ULL << 34)
+
+/* MISC_ENABLE bits: model-specific, meaning may vary from core to core */
+#define MSR_IA32_MISC_ENABLE_X87_COMPAT		(1ULL << 2)
+#define MSR_IA32_MISC_ENABLE_TM1		(1ULL << 3)
+#define MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE	(1ULL << 4)
+#define MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE	(1ULL << 6)
+#define MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK	(1ULL << 8)
+#define MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE	(1ULL << 9)
+#define MSR_IA32_MISC_ENABLE_FERR		(1ULL << 10)
+#define MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX	(1ULL << 10)
+#define MSR_IA32_MISC_ENABLE_TM2		(1ULL << 13)
+#define MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE	(1ULL << 19)
+#define MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK	(1ULL << 20)
+#define MSR_IA32_MISC_ENABLE_L1D_CONTEXT	(1ULL << 24)
+#define MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE	(1ULL << 37)
+#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE	(1ULL << 38)
+#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE	(1ULL << 39)
+
+/* P4/Xeon+ specific */
+#define MSR_IA32_MCG_EAX		0x00000180
+#define MSR_IA32_MCG_EBX		0x00000181
+#define MSR_IA32_MCG_ECX		0x00000182
+#define MSR_IA32_MCG_EDX		0x00000183
+#define MSR_IA32_MCG_ESI		0x00000184
+#define MSR_IA32_MCG_EDI		0x00000185
+#define MSR_IA32_MCG_EBP		0x00000186
+#define MSR_IA32_MCG_ESP		0x00000187
+#define MSR_IA32_MCG_EFLAGS		0x00000188
+#define MSR_IA32_MCG_EIP		0x00000189
+#define MSR_IA32_MCG_RESERVED		0x0000018a
+
+/* Pentium IV performance counter MSRs */
+#define MSR_P4_BPU_PERFCTR0		0x00000300
+#define MSR_P4_BPU_PERFCTR1		0x00000301
+#define MSR_P4_BPU_PERFCTR2		0x00000302
+#define MSR_P4_BPU_PERFCTR3		0x00000303
+#define MSR_P4_MS_PERFCTR0		0x00000304
+#define MSR_P4_MS_PERFCTR1		0x00000305
+#define MSR_P4_MS_PERFCTR2		0x00000306
+#define MSR_P4_MS_PERFCTR3		0x00000307
+#define MSR_P4_FLAME_PERFCTR0		0x00000308
+#define MSR_P4_FLAME_PERFCTR1		0x00000309
+#define MSR_P4_FLAME_PERFCTR2		0x0000030a
+#define MSR_P4_FLAME_PERFCTR3		0x0000030b
+#define MSR_P4_IQ_PERFCTR0		0x0000030c
+#define MSR_P4_IQ_PERFCTR1		0x0000030d
+#define MSR_P4_IQ_PERFCTR2		0x0000030e
+#define MSR_P4_IQ_PERFCTR3		0x0000030f
+#define MSR_P4_IQ_PERFCTR4		0x00000310
+#define MSR_P4_IQ_PERFCTR5		0x00000311
+#define MSR_P4_BPU_CCCR0		0x00000360
+#define MSR_P4_BPU_CCCR1		0x00000361
+#define MSR_P4_BPU_CCCR2		0x00000362
+#define MSR_P4_BPU_CCCR3		0x00000363
+#define MSR_P4_MS_CCCR0			0x00000364
+#define MSR_P4_MS_CCCR1			0x00000365
+#define MSR_P4_MS_CCCR2			0x00000366
+#define MSR_P4_MS_CCCR3			0x00000367
+#define MSR_P4_FLAME_CCCR0		0x00000368
+#define MSR_P4_FLAME_CCCR1		0x00000369
+#define MSR_P4_FLAME_CCCR2		0x0000036a
+#define MSR_P4_FLAME_CCCR3		0x0000036b
+#define MSR_P4_IQ_CCCR0			0x0000036c
+#define MSR_P4_IQ_CCCR1			0x0000036d
+#define MSR_P4_IQ_CCCR2			0x0000036e
+#define MSR_P4_IQ_CCCR3			0x0000036f
+#define MSR_P4_IQ_CCCR4			0x00000370
+#define MSR_P4_IQ_CCCR5			0x00000371
+#define MSR_P4_ALF_ESCR0		0x000003ca
+#define MSR_P4_ALF_ESCR1		0x000003cb
+#define MSR_P4_BPU_ESCR0		0x000003b2
+#define MSR_P4_BPU_ESCR1		0x000003b3
+#define MSR_P4_BSU_ESCR0		0x000003a0
+#define MSR_P4_BSU_ESCR1		0x000003a1
+#define MSR_P4_CRU_ESCR0		0x000003b8
+#define MSR_P4_CRU_ESCR1		0x000003b9
+#define MSR_P4_CRU_ESCR2		0x000003cc
+#define MSR_P4_CRU_ESCR3		0x000003cd
+#define MSR_P4_CRU_ESCR4		0x000003e0
+#define MSR_P4_CRU_ESCR5		0x000003e1
+#define MSR_P4_DAC_ESCR0		0x000003a8
+#define MSR_P4_DAC_ESCR1		0x000003a9
+#define MSR_P4_FIRM_ESCR0		0x000003a4
+#define MSR_P4_FIRM_ESCR1		0x000003a5
+#define MSR_P4_FLAME_ESCR0		0x000003a6
+#define MSR_P4_FLAME_ESCR1		0x000003a7
+#define MSR_P4_FSB_ESCR0		0x000003a2
+#define MSR_P4_FSB_ESCR1		0x000003a3
+#define MSR_P4_IQ_ESCR0			0x000003ba
+#define MSR_P4_IQ_ESCR1			0x000003bb
+#define MSR_P4_IS_ESCR0			0x000003b4
+#define MSR_P4_IS_ESCR1			0x000003b5
+#define MSR_P4_ITLB_ESCR0		0x000003b6
+#define MSR_P4_ITLB_ESCR1		0x000003b7
+#define MSR_P4_IX_ESCR0			0x000003c8
+#define MSR_P4_IX_ESCR1			0x000003c9
+#define MSR_P4_MOB_ESCR0		0x000003aa
+#define MSR_P4_MOB_ESCR1		0x000003ab
+#define MSR_P4_MS_ESCR0			0x000003c0
+#define MSR_P4_MS_ESCR1			0x000003c1
+#define MSR_P4_PMH_ESCR0		0x000003ac
+#define MSR_P4_PMH_ESCR1		0x000003ad
+#define MSR_P4_RAT_ESCR0		0x000003bc
+#define MSR_P4_RAT_ESCR1		0x000003bd
+#define MSR_P4_SAAT_ESCR0		0x000003ae
+#define MSR_P4_SAAT_ESCR1		0x000003af
+#define MSR_P4_SSU_ESCR0		0x000003be
+#define MSR_P4_SSU_ESCR1		0x000003bf /* guess: not in manual */
+
+#define MSR_P4_TBPU_ESCR0		0x000003c2
+#define MSR_P4_TBPU_ESCR1		0x000003c3
+#define MSR_P4_TC_ESCR0			0x000003c4
+#define MSR_P4_TC_ESCR1			0x000003c5
+#define MSR_P4_U2L_ESCR0		0x000003b0
+#define MSR_P4_U2L_ESCR1		0x000003b1
+
+#define MSR_P4_PEBS_MATRIX_VERT		0x000003f2
+
+/* Intel Core-based CPU performance counters */
+#define MSR_CORE_PERF_FIXED_CTR0	0x00000309
+#define MSR_CORE_PERF_FIXED_CTR1	0x0000030a
+#define MSR_CORE_PERF_FIXED_CTR2	0x0000030b
+#define MSR_CORE_PERF_FIXED_CTR_CTRL	0x0000038d
+#define MSR_CORE_PERF_GLOBAL_STATUS	0x0000038e
+#define MSR_CORE_PERF_GLOBAL_CTRL	0x0000038f
+#define MSR_CORE_PERF_GLOBAL_OVF_CTRL	0x00000390
+
+/* Geode defined MSRs */
+#define MSR_GEODE_BUSCONT_CONF0		0x00001900
+
+/* Intel VT MSRs */
+#define MSR_IA32_VMX_BASIC              0x00000480
+#define MSR_IA32_VMX_PINBASED_CTLS      0x00000481
+#define MSR_IA32_VMX_PROCBASED_CTLS     0x00000482
+#define MSR_IA32_VMX_EXIT_CTLS          0x00000483
+#define MSR_IA32_VMX_ENTRY_CTLS         0x00000484
+#define MSR_IA32_VMX_MISC               0x00000485
+#define MSR_IA32_VMX_CR0_FIXED0         0x00000486
+#define MSR_IA32_VMX_CR0_FIXED1         0x00000487
+#define MSR_IA32_VMX_CR4_FIXED0         0x00000488
+#define MSR_IA32_VMX_CR4_FIXED1         0x00000489
+#define MSR_IA32_VMX_VMCS_ENUM          0x0000048a
+#define MSR_IA32_VMX_PROCBASED_CTLS2    0x0000048b
+#define MSR_IA32_VMX_EPT_VPID_CAP       0x0000048c
+
+/* AMD-V MSRs */
+
+#define MSR_VM_CR                       0xc0010114
+#define MSR_VM_IGNNE                    0xc0010115
+#define MSR_VM_HSAVE_PA                 0xc0010117
+
+#endif /* _ASM_X86_MSR_INDEX_H */
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
new file mode 100644
index 0000000..6030633
--- /dev/null
+++ b/arch/x86/include/asm/msr.h
@@ -0,0 +1,238 @@
+/*
+ * Taken from the linux kernel file of the same name
+ *
+ * (C) Copyright 2012
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_X86_MSR_H
+#define _ASM_X86_MSR_H
+
+#include <asm/msr-index.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define X86_IOC_RDMSR_REGS	_IOWR('c', 0xA0, __u32[8])
+#define X86_IOC_WRMSR_REGS	_IOWR('c', 0xA1, __u32[8])
+
+#ifdef __KERNEL__
+
+#include <asm/errno.h>
+
+struct msr {
+	union {
+		struct {
+			u32 l;
+			u32 h;
+		};
+		u64 q;
+	};
+};
+
+struct msr_info {
+	u32 msr_no;
+	struct msr reg;
+	struct msr *msrs;
+	int err;
+};
+
+struct msr_regs_info {
+	u32 *regs;
+	int err;
+};
+
+static inline unsigned long long native_read_tscp(unsigned int *aux)
+{
+	unsigned long low, high;
+	asm volatile(".byte 0x0f,0x01,0xf9"
+		     : "=a" (low), "=d" (high), "=c" (*aux));
+	return low | ((u64)high << 32);
+}
+
+/*
+ * both i386 and x86_64 returns 64-bit value in edx:eax, but gcc's "A"
+ * constraint has different meanings. For i386, "A" means exactly
+ * edx:eax, while for x86_64 it doesn't mean rdx:rax or edx:eax. Instead,
+ * it means rax *or* rdx.
+ */
+#ifdef CONFIG_X86_64
+#define DECLARE_ARGS(val, low, high)	unsigned low, high
+#define EAX_EDX_VAL(val, low, high)	((low) | ((u64)(high) << 32))
+#define EAX_EDX_ARGS(val, low, high)	"a" (low), "d" (high)
+#define EAX_EDX_RET(val, low, high)	"=a" (low), "=d" (high)
+#else
+#define DECLARE_ARGS(val, low, high)	unsigned long long val
+#define EAX_EDX_VAL(val, low, high)	(val)
+#define EAX_EDX_ARGS(val, low, high)	"A" (val)
+#define EAX_EDX_RET(val, low, high)	"=A" (val)
+#endif
+
+static inline unsigned long long native_read_msr(unsigned int msr)
+{
+	DECLARE_ARGS(val, low, high);
+
+	asm volatile("rdmsr" : EAX_EDX_RET(val, low, high) : "c" (msr));
+	return EAX_EDX_VAL(val, low, high);
+}
+
+static inline void native_write_msr(unsigned int msr,
+				    unsigned low, unsigned high)
+{
+	asm volatile("wrmsr" : : "c" (msr), "a"(low), "d" (high) : "memory");
+}
+
+extern unsigned long long native_read_tsc(void);
+
+extern int native_rdmsr_safe_regs(u32 regs[8]);
+extern int native_wrmsr_safe_regs(u32 regs[8]);
+
+static inline unsigned long long native_read_pmc(int counter)
+{
+	DECLARE_ARGS(val, low, high);
+
+	asm volatile("rdpmc" : EAX_EDX_RET(val, low, high) : "c" (counter));
+	return EAX_EDX_VAL(val, low, high);
+}
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#include <errno.h>
+/*
+ * Access to machine-specific registers (available on 586 and better only)
+ * Note: the rd* operations modify the parameters directly (without using
+ * pointer indirection), this allows gcc to optimize better
+ */
+
+#define rdmsr(msr, val1, val2)					\
+do {								\
+	u64 __val = native_read_msr((msr));			\
+	(void)((val1) = (u32)__val);				\
+	(void)((val2) = (u32)(__val >> 32));			\
+} while (0)
+
+static inline void wrmsr(unsigned msr, unsigned low, unsigned high)
+{
+	native_write_msr(msr, low, high);
+}
+
+#define rdmsrl(msr, val)			\
+	((val) = native_read_msr((msr)))
+
+#define wrmsrl(msr, val)						\
+	native_write_msr((msr), (u32)((u64)(val)), (u32)((u64)(val) >> 32))
+
+/* rdmsr with exception handling */
+#define rdmsr_safe(msr, p1, p2)					\
+({								\
+	int __err;						\
+	u64 __val = native_read_msr_safe((msr), &__err);	\
+	(*p1) = (u32)__val;					\
+	(*p2) = (u32)(__val >> 32);				\
+	__err;							\
+})
+
+static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
+{
+	u32 gprs[8] = { 0 };
+	int err;
+
+	gprs[1] = msr;
+	gprs[7] = 0x9c5a203a;
+
+	err = native_rdmsr_safe_regs(gprs);
+
+	*p = gprs[0] | ((u64)gprs[2] << 32);
+
+	return err;
+}
+
+static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
+{
+	u32 gprs[8] = { 0 };
+
+	gprs[0] = (u32)val;
+	gprs[1] = msr;
+	gprs[2] = val >> 32;
+	gprs[7] = 0x9c5a203a;
+
+	return native_wrmsr_safe_regs(gprs);
+}
+
+static inline int rdmsr_safe_regs(u32 regs[8])
+{
+	return native_rdmsr_safe_regs(regs);
+}
+
+static inline int wrmsr_safe_regs(u32 regs[8])
+{
+	return native_wrmsr_safe_regs(regs);
+}
+
+#define rdtscl(low)						\
+	((low) = (u32)__native_read_tsc())
+
+#define rdtscll(val)						\
+	((val) = __native_read_tsc())
+
+#define rdpmc(counter, low, high)			\
+do {							\
+	u64 _l = native_read_pmc((counter));		\
+	(low)  = (u32)_l;				\
+	(high) = (u32)(_l >> 32);			\
+} while (0)
+
+#define rdtscp(low, high, aux)					\
+do {                                                            \
+	unsigned long long _val = native_read_tscp(&(aux));     \
+	(low) = (u32)_val;                                      \
+	(high) = (u32)(_val >> 32);                             \
+} while (0)
+
+#define rdtscpll(val, aux) (val) = native_read_tscp(&(aux))
+
+#endif	/* !CONFIG_PARAVIRT */
+
+
+#define checking_wrmsrl(msr, val) wrmsr_safe((msr), (u32)(val),		\
+					     (u32)((val) >> 32))
+
+#define write_tsc(val1, val2) wrmsr(MSR_IA32_TSC, (val1), (val2))
+
+#define write_rdtscp_aux(val) wrmsr(MSR_TSC_AUX, (val), 0)
+
+struct msr *msrs_alloc(void);
+void msrs_free(struct msr *msrs);
+
+#ifdef CONFIG_SMP
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+void rdmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs);
+void wrmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs);
+int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
+int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
+
+#endif  /* CONFIG_SMP */
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_X86_MSR_H */
diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
new file mode 100644
index 0000000..6842da5
--- /dev/null
+++ b/arch/x86/include/asm/mtrr.h
@@ -0,0 +1,206 @@
+/*
+ * Generic MTRR (Memory Type Range Register) ioctls.
+ * Taken from the Linux kernel
+ *
+ * (C) Copyright 2012
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * Copyright (C) 1997-1999  Richard Gooch <rgooch@atnf.csiro.au>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_X86_MTRR_H
+#define _ASM_X86_MTRR_H
+
+#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
+#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <errno.h>
+
+#define	MTRR_IOCTL_BASE	'M'
+
+struct mtrr_sentry {
+	unsigned long base;	/*  Base address     */
+	unsigned int size;	/*  Size of region   */
+	unsigned int type;	/*  Type of region   */
+};
+
+/*
+ * Warning: this structure has a different order from i386
+ * on x86-64. The 32bit emulation code takes care of that.
+ * But you need to use this for 64bit, otherwise your X server
+ * will break.
+ */
+
+#ifdef __i386__
+struct mtrr_gentry {
+	unsigned int regnum;	/*  Register number  */
+	unsigned long base;	/*  Base address     */
+	unsigned int size;	/*  Size of region   */
+	unsigned int type;	/*  Type of region   */
+};
+
+#else /* __i386__ */
+
+struct mtrr_gentry {
+	unsigned long base;	/*  Base address     */
+	unsigned int size;	/*  Size of region   */
+	unsigned int regnum;	/*  Register number  */
+	unsigned int type;	/*  Type of region   */
+};
+#endif /* !__i386__ */
+
+struct mtrr_var_range {
+	__u32 base_lo;
+	__u32 base_hi;
+	__u32 mask_lo;
+	__u32 mask_hi;
+};
+
+/*
+ * In the Intel processor's MTRR interface, the MTRR type is always held in
+ * an 8 bit field:
+ */
+typedef __u8 mtrr_type;
+
+#define MTRR_NUM_FIXED_RANGES 88
+#define MTRR_MAX_VAR_RANGES 256
+
+struct mtrr_state_type {
+	struct mtrr_var_range var_ranges[MTRR_MAX_VAR_RANGES];
+	mtrr_type fixed_ranges[MTRR_NUM_FIXED_RANGES];
+	unsigned char enabled;
+	unsigned char have_fixed;
+	mtrr_type def_type;
+};
+
+/*  These are the various ioctls  */
+#define MTRRIOC_ADD_ENTRY        _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry)
+#define MTRRIOC_SET_ENTRY        _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry)
+#define MTRRIOC_DEL_ENTRY        _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry)
+#define MTRRIOC_GET_ENTRY        _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry)
+#define MTRRIOC_KILL_ENTRY       _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry)
+#define MTRRIOC_ADD_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry)
+#define MTRRIOC_SET_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry)
+#define MTRRIOC_DEL_PAGE_ENTRY   _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry)
+#define MTRRIOC_GET_PAGE_ENTRY   _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry)
+#define MTRRIOC_KILL_PAGE_ENTRY  _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry)
+
+/*  These are the region types  */
+#define MTRR_TYPE_UNCACHABLE 0
+#define MTRR_TYPE_WRCOMB     1
+/*#define MTRR_TYPE_         2*/
+/*#define MTRR_TYPE_         3*/
+#define MTRR_TYPE_WRTHROUGH  4
+#define MTRR_TYPE_WRPROT     5
+#define MTRR_TYPE_WRBACK     6
+#define MTRR_NUM_TYPES       7
+
+#ifdef __KERNEL__
+
+/*  The following functions are for use by other drivers  */
+# ifdef CONFIG_MTRR
+extern u8 mtrr_type_lookup(u64 addr, u64 end);
+extern void mtrr_save_fixed_ranges(void *);
+extern void mtrr_save_state(void);
+extern int mtrr_add(unsigned long base, unsigned long size,
+		    unsigned int type, bool increment);
+extern int mtrr_add_page(unsigned long base, unsigned long size,
+			 unsigned int type, bool increment);
+extern int mtrr_del(int reg, unsigned long base, unsigned long size);
+extern int mtrr_del_page(int reg, unsigned long base, unsigned long size);
+extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi);
+extern void mtrr_ap_init(void);
+extern void mtrr_bp_init(void);
+extern void set_mtrr_aps_delayed_init(void);
+extern void mtrr_aps_init(void);
+extern void mtrr_bp_restore(void);
+extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
+extern int amd_special_default_mtrr(void);
+#  else
+static inline u8 mtrr_type_lookup(u64 addr, u64 end)
+{
+	/*
+	 * Return no-MTRRs:
+	 */
+	return 0xff;
+}
+#define mtrr_save_fixed_ranges(arg) do {} while (0)
+#define mtrr_save_state() do {} while (0)
+static inline int mtrr_del(int reg, unsigned long base, unsigned long size)
+{
+	return -ENODEV;
+}
+static inline int mtrr_del_page(int reg, unsigned long base, unsigned long size)
+{
+	return -ENODEV;
+}
+static inline int mtrr_trim_uncached_memory(unsigned long end_pfn)
+{
+	return 0;
+}
+static inline void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
+{
+}
+
+#define mtrr_ap_init() do {} while (0)
+#define mtrr_bp_init() do {} while (0)
+#define set_mtrr_aps_delayed_init() do {} while (0)
+#define mtrr_aps_init() do {} while (0)
+#define mtrr_bp_restore() do {} while (0)
+#  endif
+
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+
+struct mtrr_sentry32 {
+	compat_ulong_t base;	/*  Base address     */
+	compat_uint_t size;	/*  Size of region   */
+	compat_uint_t type;	/*  Type of region   */
+};
+
+struct mtrr_gentry32 {
+	compat_ulong_t regnum;	/*  Register number  */
+	compat_uint_t base;	/*  Base address     */
+	compat_uint_t size;	/*  Size of region   */
+	compat_uint_t type;	/*  Type of region   */
+};
+
+#define MTRR_IOCTL_BASE 'M'
+
+#define MTRRIOC32_ADD_ENTRY      _IOW(MTRR_IOCTL_BASE,  0, struct mtrr_sentry32)
+#define MTRRIOC32_SET_ENTRY      _IOW(MTRR_IOCTL_BASE,  1, struct mtrr_sentry32)
+#define MTRRIOC32_DEL_ENTRY      _IOW(MTRR_IOCTL_BASE,  2, struct mtrr_sentry32)
+#define MTRRIOC32_GET_ENTRY      _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry32)
+#define MTRRIOC32_KILL_ENTRY     _IOW(MTRR_IOCTL_BASE,  4, struct mtrr_sentry32)
+#define MTRRIOC32_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  5, struct mtrr_sentry32)
+#define MTRRIOC32_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  6, struct mtrr_sentry32)
+#define MTRRIOC32_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE,  7, struct mtrr_sentry32)
+#define MTRRIOC32_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry32)
+#define MTRRIOC32_KILL_PAGE_ENTRY		\
+				 _IOW(MTRR_IOCTL_BASE,  9, struct mtrr_sentry32)
+#endif /* CONFIG_COMPAT */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_X86_MTRR_H */
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 37cc7e3..6d68ab6 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -24,7 +24,7 @@
  */
 
 #ifndef _PCI_I386_H_
-#define _PCI_I386_H_	1
+#define _PCI_I386_H_
 
 #define DEFINE_PCI_DEVICE_TABLE(_table) \
 	const struct pci_device_id _table[]
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 6eb5180..17f27cb 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -41,6 +41,7 @@ enum {
 #else
 /* NOTE: If the above enum is modified, this define must be checked */
 #define X86_GDT_ENTRY_32BIT_DS	3
+#define X86_GDT_NUM_ENTRIES	7
 #endif
 
 #define X86_GDT_SIZE		(X86_GDT_NUM_ENTRIES * X86_GDT_ENTRY_SIZE)
diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h
index 9a40e38..e9fde88 100644
--- a/arch/x86/include/asm/types.h
+++ b/arch/x86/include/asm/types.h
@@ -45,8 +45,8 @@ typedef unsigned long long u64;
 
 typedef u32 dma_addr_t;
 
-typedef unsigned long phys_addr_t;
-typedef unsigned long phys_size_t;
+typedef unsigned long long phys_addr_t;
+typedef unsigned long long phys_size_t;
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
index 878a1ee..99062e5 100644
--- a/arch/x86/include/asm/u-boot-x86.h
+++ b/arch/x86/include/asm/u-boot-x86.h
@@ -40,6 +40,7 @@ int cpu_init_f(void);
 void init_gd(gd_t *id, u64 *gdt_addr);
 void setup_gdt(gd_t *id, u64 *gdt_addr);
 int init_cache(void);
+int cleanup_before_linux(void);
 
 /* cpu/.../timer.c */
 void timer_isr(void *);
@@ -62,9 +63,20 @@ u32 isa_map_rom(u32 bus_addr, int size);
 
 /* arch/x86/lib/... */
 int video_bios_init(void);
-int video_init(void);
 
 void	board_init_f_r_trampoline(ulong) __attribute__ ((noreturn));
 void	board_init_f_r(void) __attribute__ ((noreturn));
 
+/* Read the time stamp counter */
+static inline uint64_t rdtsc(void)
+{
+	uint32_t high, low;
+	__asm__ __volatile__("rdtsc" : "=a" (low), "=d" (high));
+	return (((uint64_t)high) << 32) | low;
+}
+
+/* board/... */
+void timer_set_tsc_base(uint64_t new_base);
+uint64_t timer_get_tsc(void);
+
 #endif	/* _U_BOOT_I386_H_ */
diff --git a/arch/x86/include/asm/u-boot.h b/arch/x86/include/asm/u-boot.h
index da667c5..2f45c7b 100644
--- a/arch/x86/include/asm/u-boot.h
+++ b/arch/x86/include/asm/u-boot.h
@@ -36,6 +36,9 @@
 #ifndef _U_BOOT_H_
 #define _U_BOOT_H_	1
 
+#include <config.h>
+#include <compiler.h>
+
 typedef struct bd_info {
 	unsigned long	bi_memstart;	/* start of DRAM memory */
 	phys_size_t	bi_memsize;	/* size	 of DRAM memory in bytes */
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 51836da..0a52cc8 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -25,11 +25,16 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(ARCH).o
 
+ifeq ($(CONFIG_X86_NO_REAL_MODE),)
 SOBJS-$(CONFIG_SYS_PC_BIOS)	+= bios.o
 SOBJS-$(CONFIG_SYS_PCI_BIOS)	+= bios_pci.o
-SOBJS-$(CONFIG_SYS_X86_REALMODE)	+= realmode_switch.o
+COBJS-y	+= realmode.o
+SOBJS-y	+= realmode_switch.o
 
 COBJS-$(CONFIG_SYS_PC_BIOS)	+= bios_setup.o
+COBJS-$(CONFIG_VIDEO_VGA)	+= video_bios.o
+endif
+
 COBJS-y	+= board.o
 COBJS-y	+= bootm.o
 COBJS-y	+= cmd_boot.o
@@ -41,12 +46,11 @@ COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o
 COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o
 COBJS-$(CONFIG_PCI) += pci.o
 COBJS-$(CONFIG_PCI) += pci_type1.o
-COBJS-$(CONFIG_SYS_X86_REALMODE)	+= realmode.o
 COBJS-y	+= relocate.o
+COBJS-y += physmem.o
 COBJS-y	+= string.o
 COBJS-$(CONFIG_SYS_X86_ISR_TIMER)	+= timer.o
-COBJS-$(CONFIG_VIDEO)	+= video_bios.o
-COBJS-$(CONFIG_VIDEO)	+= video.o
+COBJS-$(CONFIG_VIDEO_VGA)	+= video.o
 COBJS-$(CONFIG_CMD_ZBOOT)	+= zimage.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/arch/x86/lib/board.c b/arch/x86/lib/board.c
index e5caf13..22bc26d 100644
--- a/arch/x86/lib/board.c
+++ b/arch/x86/lib/board.c
@@ -36,6 +36,7 @@
 #include <stdio_dev.h>
 #include <asm/u-boot-x86.h>
 #include <asm/relocate.h>
+#include <asm/processor.h>
 
 #include <asm/init_helpers.h>
 #include <asm/init_wrappers.h>
@@ -98,10 +99,17 @@ typedef int (init_fnc_t) (void);
 init_fnc_t *init_sequence_f[] = {
 	cpu_init_f,
 	board_early_init_f,
+#ifdef CONFIG_OF_CONTROL
+	find_fdt,
+	fdtdec_check_fdt,
+#endif
 	env_init,
 	init_baudrate_f,
 	serial_init,
 	console_init_f,
+#ifdef CONFIG_OF_CONTROL
+	prepare_fdt,
+#endif
 	dram_init_f,
 	calculate_relocation_address,
 
@@ -121,7 +129,6 @@ init_fnc_t *init_sequence_f[] = {
  * initialise the CPU caches (to speed up the relocation process)
  */
 init_fnc_t *init_sequence_f_r[] = {
-	copy_gd_to_ram_f_r,
 	init_cache_f_r,
 	copy_uboot_to_ram,
 	clear_bss,
@@ -154,6 +161,9 @@ init_fnc_t *init_sequence_r[] = {
 #ifndef CONFIG_SYS_NO_FLASH
 	flash_init_r,
 #endif
+#ifdef CONFIG_SPI
+	init_func_spi;
+#endif
 	env_relocate_r,
 #ifdef CONFIG_PCI
 	pci_init_r,
@@ -164,9 +174,6 @@ init_fnc_t *init_sequence_r[] = {
 #ifdef CONFIG_MISC_INIT_R
 	misc_init_r,
 #endif
-#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
-	pci_init_r,
-#endif
 #if defined(CONFIG_CMD_KGDB)
 	kgdb_init_r,
 #endif
diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c
index 9ec34ff..3eec9a6 100644
--- a/arch/x86/lib/init_helpers.c
+++ b/arch/x86/lib/init_helpers.c
@@ -28,9 +28,11 @@
 #include <net.h>
 #include <ide.h>
 #include <serial.h>
+#include <spi.h>
 #include <status_led.h>
 #include <asm/processor.h>
 #include <asm/u-boot-x86.h>
+#include <linux/compiler.h>
 
 #include <asm/init_helpers.h>
 
@@ -71,7 +73,7 @@ int init_baudrate_f(void)
 	return 0;
 }
 
-int calculate_relocation_address(void)
+__weak int calculate_relocation_address(void)
 {
 	ulong text_start = (ulong)&__text_start;
 	ulong bss_end = (ulong)&__bss_end;
@@ -83,51 +85,17 @@ int calculate_relocation_address(void)
 	 *       requirements
 	 */
 
-	/* Global Data is at top of available memory */
+	/* Stack is at top of available memory */
 	dest_addr = gd->ram_size;
-	dest_addr -= GENERATED_GBL_DATA_SIZE;
-	dest_addr &= ~15;
-	gd->new_gd_addr = dest_addr;
-
-	/* GDT is below Global Data */
-	dest_addr -= X86_GDT_SIZE;
-	dest_addr &= ~15;
-	gd->gdt_addr = dest_addr;
-
-	/* Stack is below GDT */
-	gd->start_addr_sp = dest_addr;
 
-	/* U-Boot is below the stack */
-	dest_addr -= CONFIG_SYS_STACK_SIZE;
+	/* U-Boot is at the top */
 	dest_addr -= (bss_end - text_start);
 	dest_addr &= ~15;
 	gd->relocaddr = dest_addr;
 	gd->reloc_off = (dest_addr - text_start);
 
-	return 0;
-}
-
-int copy_gd_to_ram_f_r(void)
-{
-	gd_t *ram_gd;
-
-	/*
-	 * Global data is still in temporary memory (the CPU cache).
-	 * calculate_relocation_address() has set gd->new_gd_addr to
-	 * where the global data lives in RAM but getting it there
-	 * safely is a bit tricky due to the 'F-Segment Hack' that
-	 * we need to use for x86
-	 */
-	ram_gd = (gd_t *)gd->new_gd_addr;
-	memcpy((void *)ram_gd, gd, sizeof(gd_t));
-
-	/*
-	 * Reload the Global Descriptor Table so FS points to the
-	 * in-RAM copy of Global Data (calculate_relocation_address()
-	 * has already calculated the in-RAM location of the GDT)
-	 */
-	ram_gd->gd_addr = (ulong)ram_gd;
-	init_gd(ram_gd, (u64 *)gd->gdt_addr);
+	/* Stack is at the bottom, so it can grow down */
+	gd->start_addr_sp = dest_addr - CONFIG_SYS_MALLOC_LEN;
 
 	return 0;
 }
@@ -195,3 +163,40 @@ int set_load_addr_r(void)
 
 	return 0;
 }
+
+int init_func_spi(void)
+{
+	puts("SPI:   ");
+	spi_init();
+	puts("ready\n");
+	return 0;
+}
+
+#ifdef CONFIG_OF_CONTROL
+int find_fdt(void)
+{
+#ifdef CONFIG_OF_EMBED
+	/* Get a pointer to the FDT */
+	gd->fdt_blob = _binary_dt_dtb_start;
+#elif defined CONFIG_OF_SEPARATE
+	/* FDT is at end of image */
+	gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE);
+#endif
+	/* Allow the early environment to override the fdt address */
+	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
+						(uintptr_t)gd->fdt_blob);
+
+	return 0;
+}
+
+int prepare_fdt(void)
+{
+	/* For now, put this check after the console is ready */
+	if (fdtdec_prepare_fdt()) {
+		panic("** CONFIG_OF_CONTROL defined but no FDT - please see "
+			"doc/README.fdt-control");
+	}
+
+	return 0;
+}
+#endif
diff --git a/arch/x86/lib/init_wrappers.c b/arch/x86/lib/init_wrappers.c
index 71449fe..cca018f 100644
--- a/arch/x86/lib/init_wrappers.c
+++ b/arch/x86/lib/init_wrappers.c
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <environment.h>
 #include <serial.h>
 #include <kgdb.h>
 #include <scsi.h>
@@ -36,10 +37,35 @@ int serial_initialize_r(void)
 	return 0;
 }
 
+/*
+ * Tell if it's OK to load the environment early in boot.
+ *
+ * If CONFIG_OF_CONFIG is defined, we'll check with the FDT to see
+ * if this is OK (defaulting to saying it's not OK).
+ *
+ * NOTE: Loading the environment early can be a bad idea if security is
+ *       important, since no verification is done on the environment.
+ *
+ * @return 0 if environment should not be loaded, !=0 if it is ok to load
+ */
+static int should_load_env(void)
+{
+#ifdef CONFIG_OF_CONTROL
+	return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 0);
+#elif defined CONFIG_DELAY_ENVIRONMENT
+	return 0;
+#else
+	return 1;
+#endif
+}
+
 int env_relocate_r(void)
 {
 	/* initialize environment */
-	env_relocate();
+	if (should_load_env())
+		env_relocate();
+	else
+		set_default_env(NULL);
 
 	return 0;
 }
diff --git a/arch/x86/lib/pcat_timer.c b/arch/x86/lib/pcat_timer.c
index 6b3db69..b0b6637 100644
--- a/arch/x86/lib/pcat_timer.c
+++ b/arch/x86/lib/pcat_timer.c
@@ -39,7 +39,7 @@ int timer_init(void)
 	 * Timer 0 is used to increment system_tick 1000 times/sec
 	 * Timer 1 was used for DRAM refresh in early PC's
 	 * Timer 2 is used to drive the speaker
-	 * (to stasrt a beep: write 3 to port 0x61,
+	 * (to start a beep: write 3 to port 0x61,
 	 * to stop it again: write 0)
 	 */
 	outb(PIT_CMD_CTR0 | PIT_CMD_BOTH | PIT_CMD_MODE2,
diff --git a/arch/x86/lib/physmem.c b/arch/x86/lib/physmem.c
new file mode 100644
index 0000000..18f0e62
--- /dev/null
+++ b/arch/x86/lib/physmem.c
@@ -0,0 +1,228 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ */
+
+#include <common.h>
+#include <physmem.h>
+#include <linux/compiler.h>
+
+/* Large pages are 2MB. */
+#define LARGE_PAGE_SIZE ((1 << 20) * 2)
+
+/*
+ * Paging data structures.
+ */
+
+struct pdpe {
+	uint64_t p:1;
+	uint64_t mbz_0:2;
+	uint64_t pwt:1;
+	uint64_t pcd:1;
+	uint64_t mbz_1:4;
+	uint64_t avl:3;
+	uint64_t base:40;
+	uint64_t mbz_2:12;
+};
+
+typedef struct pdpe pdpt_t[512];
+
+struct pde {
+	uint64_t p:1;      /* present */
+	uint64_t rw:1;     /* read/write */
+	uint64_t us:1;     /* user/supervisor */
+	uint64_t pwt:1;    /* page-level writethrough */
+	uint64_t pcd:1;    /* page-level cache disable */
+	uint64_t a:1;      /* accessed */
+	uint64_t d:1;      /* dirty */
+	uint64_t ps:1;     /* page size */
+	uint64_t g:1;      /* global page */
+	uint64_t avl:3;    /* available to software */
+	uint64_t pat:1;    /* page-attribute table */
+	uint64_t mbz_0:8;  /* must be zero */
+	uint64_t base:31;  /* base address */
+};
+
+typedef struct pde pdt_t[512];
+
+static pdpt_t pdpt __aligned(4096);
+static pdt_t pdts[4] __aligned(4096);
+
+/*
+ * Map a virtual address to a physical address and optionally invalidate any
+ * old mapping.
+ *
+ * @param virt		The virtual address to use.
+ * @param phys		The physical address to use.
+ * @param invlpg	Whether to use invlpg to clear any old mappings.
+ */
+static void x86_phys_map_page(uintptr_t virt, phys_addr_t phys, int invlpg)
+{
+	/* Extract the two bit PDPT index and the 9 bit PDT index. */
+	uintptr_t pdpt_idx = (virt >> 30) & 0x3;
+	uintptr_t pdt_idx = (virt >> 21) & 0x1ff;
+
+	/* Set up a handy pointer to the appropriate PDE. */
+	struct pde *pde = &(pdts[pdpt_idx][pdt_idx]);
+
+	memset(pde, 0, sizeof(struct pde));
+	pde->p = 1;
+	pde->rw = 1;
+	pde->us = 1;
+	pde->ps = 1;
+	pde->base = phys >> 21;
+
+	if (invlpg) {
+		/* Flush any stale mapping out of the TLBs. */
+		__asm__ __volatile__(
+			"invlpg %0\n\t"
+			:
+			: "m" (*(uint8_t *)virt)
+		);
+	}
+}
+
+/* Identity map the lower 4GB and turn on paging with PAE. */
+static void x86_phys_enter_paging(void)
+{
+	phys_addr_t page_addr;
+	unsigned i;
+
+	/* Zero out the page tables. */
+	memset(pdpt, 0, sizeof(pdpt));
+	memset(pdts, 0, sizeof(pdts));
+
+	/* Set up the PDPT. */
+	for (i = 0; i < ARRAY_SIZE(pdts); i++) {
+		pdpt[i].p = 1;
+		pdpt[i].base = ((uintptr_t)&pdts[i]) >> 12;
+	}
+
+	/* Identity map everything up to 4GB. */
+	for (page_addr = 0; page_addr < (1ULL << 32);
+			page_addr += LARGE_PAGE_SIZE) {
+		/* There's no reason to invalidate the TLB with paging off. */
+		x86_phys_map_page(page_addr, page_addr, 0);
+	}
+
+	/* Turn on paging */
+	__asm__ __volatile__(
+		/* Load the page table address */
+		"movl	%0, %%cr3\n\t"
+		/* Enable pae */
+		"movl	%%cr4, %%eax\n\t"
+		"orl	$0x00000020, %%eax\n\t"
+		"movl	%%eax, %%cr4\n\t"
+		/* Enable paging */
+		"movl	%%cr0, %%eax\n\t"
+		"orl	$0x80000000, %%eax\n\t"
+		"movl	%%eax, %%cr0\n\t"
+		:
+		: "r" (pdpt)
+		: "eax"
+	);
+}
+
+/* Disable paging and PAE mode. */
+static void x86_phys_exit_paging(void)
+{
+	/* Turn off paging */
+	__asm__ __volatile__ (
+		/* Disable paging */
+		"movl	%%cr0, %%eax\n\t"
+		"andl	$0x7fffffff, %%eax\n\t"
+		"movl	%%eax, %%cr0\n\t"
+		/* Disable pae */
+		"movl	%%cr4, %%eax\n\t"
+		"andl	$0xffffffdf, %%eax\n\t"
+		"movl	%%eax, %%cr4\n\t"
+		:
+		:
+		: "eax"
+	);
+}
+
+/*
+ * Set physical memory to a particular value when the whole region fits on one
+ * page.
+ *
+ * @param map_addr	The address that starts the physical page.
+ * @param offset	How far into that page to start setting a value.
+ * @param c		The value to set memory to.
+ * @param size		The size in bytes of the area to set.
+ */
+static void x86_phys_memset_page(phys_addr_t map_addr, uintptr_t offset, int c,
+				 unsigned size)
+{
+	/*
+	 * U-Boot should be far away from the beginning of memory, so that's a
+	 * good place to map our window on top of.
+	 */
+	const uintptr_t window = LARGE_PAGE_SIZE;
+
+	/* Make sure the window is below U-Boot. */
+	assert(window + LARGE_PAGE_SIZE <
+	       gd->relocaddr - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_STACK_SIZE);
+	/* Map the page into the window and then memset the appropriate part. */
+	x86_phys_map_page(window, map_addr, 1);
+	memset((void *)(window + offset), c, size);
+}
+
+/*
+ * A physical memory anologue to memset with matching parameters and return
+ * value.
+ */
+phys_addr_t arch_phys_memset(phys_addr_t start, int c, phys_size_t size)
+{
+	const phys_addr_t max_addr = (phys_addr_t)~(uintptr_t)0;
+	const phys_addr_t orig_start = start;
+
+	if (!size)
+		return orig_start;
+
+	/* Handle memory below 4GB. */
+	if (start <= max_addr) {
+		phys_size_t low_size = MIN(max_addr + 1 - start, size);
+		void *start_ptr = (void *)(uintptr_t)start;
+
+		assert(((phys_addr_t)(uintptr_t)start) == start);
+		memset(start_ptr, c, low_size);
+		start += low_size;
+		size -= low_size;
+	}
+
+	/* Use paging and PAE to handle memory above 4GB up to 64GB. */
+	if (size) {
+		phys_addr_t map_addr = start & ~(LARGE_PAGE_SIZE - 1);
+		phys_addr_t offset = start - map_addr;
+
+		x86_phys_enter_paging();
+
+		/* Handle the first partial page. */
+		if (offset) {
+			phys_addr_t end =
+				MIN(map_addr + LARGE_PAGE_SIZE, start + size);
+			phys_size_t cur_size = end - start;
+			x86_phys_memset_page(map_addr, offset, c, cur_size);
+			size -= cur_size;
+			map_addr += LARGE_PAGE_SIZE;
+		}
+		/* Handle the complete pages. */
+		while (size > LARGE_PAGE_SIZE) {
+			x86_phys_memset_page(map_addr, 0, c, LARGE_PAGE_SIZE);
+			size -= LARGE_PAGE_SIZE;
+			map_addr += LARGE_PAGE_SIZE;
+		}
+		/* Handle the last partial page. */
+		if (size)
+			x86_phys_memset_page(map_addr, 0, c, size);
+
+		x86_phys_exit_paging();
+	}
+	return orig_start;
+}
diff --git a/arch/x86/lib/relocate.c b/arch/x86/lib/relocate.c
index 200baab..23edca9 100644
--- a/arch/x86/lib/relocate.c
+++ b/arch/x86/lib/relocate.c
@@ -80,12 +80,12 @@ int do_elf_reloc_fixups(void)
 
 			/* Check that the target points into .text */
 			if (*offset_ptr_ram >= CONFIG_SYS_TEXT_BASE &&
-					*offset_ptr_ram <
+					*offset_ptr_ram <=
 					(CONFIG_SYS_TEXT_BASE + size)) {
 				*offset_ptr_ram += gd->reloc_off;
 			}
 		}
-	} while (re_src++ < re_end);
+	} while (++re_src < re_end);
 
 	return 0;
 }
diff --git a/arch/x86/lib/timer.c b/arch/x86/lib/timer.c
index fd7032e..a13424b 100644
--- a/arch/x86/lib/timer.c
+++ b/arch/x86/lib/timer.c
@@ -37,6 +37,7 @@ struct timer_isr_function {
 
 static struct timer_isr_function *first_timer_isr;
 static unsigned long system_ticks;
+static uint64_t base_value;
 
 /*
  * register_timer_isr() allows multiple architecture and board specific
@@ -98,3 +99,19 @@ ulong get_timer(ulong base)
 {
 	return system_ticks - base;
 }
+
+void timer_set_tsc_base(uint64_t new_base)
+{
+	base_value = new_base;
+}
+
+uint64_t timer_get_tsc(void)
+{
+	uint64_t time_now;
+
+	time_now = rdtsc();
+	if (!base_value)
+		base_value = time_now;
+
+	return time_now - base_value;
+}
diff --git a/arch/x86/lib/video.c b/arch/x86/lib/video.c
index 3d6b24d..20e2416 100644
--- a/arch/x86/lib/video.c
+++ b/arch/x86/lib/video.c
@@ -222,8 +222,10 @@ int video_init(void)
 
 int drv_video_init(void)
 {
+#ifndef CONFIG_X86_NO_REAL_MODE
 	if (video_bios_init())
 		return 1;
+#endif
 
 	return video_init();
 }
diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c
index 2214286..46af391 100644
--- a/arch/x86/lib/zimage.c
+++ b/arch/x86/lib/zimage.c
@@ -36,6 +36,10 @@
 #include <asm/realmode.h>
 #include <asm/byteorder.h>
 #include <asm/bootparam.h>
+#ifdef CONFIG_SYS_COREBOOT
+#include <asm/arch/timestamp.h>
+#endif
+#include <linux/compiler.h>
 
 /*
  * Memory lay-out:
@@ -171,7 +175,7 @@ struct boot_params *load_zimage(char *image, unsigned long kernel_size,
 	else
 		*load_address = (void *)ZIMAGE_LOAD_ADDR;
 
-#if defined CONFIG_ZBOOT_32
+#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE)
 	printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base);
 	memset(setup_base, 0, sizeof(*setup_base));
 	setup_base->hdr = params->hdr;
@@ -237,7 +241,7 @@ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot,
 	struct setup_header *hdr = &setup_base->hdr;
 	int bootproto = get_boot_protocol(hdr);
 
-#if defined CONFIG_ZBOOT_32
+#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE)
 	setup_base->e820_entries = install_e820_map(
 		ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map);
 #endif
@@ -279,10 +283,23 @@ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot,
 	return 0;
 }
 
+/*
+ * Implement a weak default function for boards that optionally
+ * need to clean up the system before jumping to the kernel.
+ */
+__weak void board_final_cleanup(void)
+{
+}
+
 void boot_zimage(void *setup_base, void *load_address)
 {
+	board_final_cleanup();
+
 	printf("\nStarting kernel ...\n\n");
 
+#ifdef CONFIG_SYS_COREBOOT
+	timestamp_add_now(TS_U_BOOT_START_KERNEL);
+#endif
 #if defined CONFIG_ZBOOT_32
 	/*
 	 * Set %ebx, %ebp, and %edi to 0, %esi to point to the boot_params
@@ -292,9 +309,9 @@ void boot_zimage(void *setup_base, void *load_address)
 	 * itself in arch/i386/cpu/cpu.c.
 	 */
 	__asm__ __volatile__ (
-	"movl $0, %%ebp		\n"
-	"cli			\n"
-	"jmp %[kernel_entry]	\n"
+	"movl $0, %%ebp\n"
+	"cli\n"
+	"jmp *%[kernel_entry]\n"
 	:: [kernel_entry]"a"(load_address),
 	   [boot_params] "S"(setup_base),
 	   "b"(0), "D"(0)
diff --git a/board/BuS/eb_cpu5282/Makefile b/board/BuS/eb_cpu5282/Makefile
index 0f14699..ac860c1 100644
--- a/board/BuS/eb_cpu5282/Makefile
+++ b/board/BuS/eb_cpu5282/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	= $(BOARD).o cfm_flash.o flash.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/BuS/eb_cpu5282/cfm_flash.c b/board/BuS/eb_cpu5282/cfm_flash.c
deleted file mode 100644
index fe03b17..0000000
--- a/board/BuS/eb_cpu5282/cfm_flash.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Basic Flash Driver for Freescale MCF 5281/5282 internal FLASH
- *
- * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/m5282.h>
-#include  "cfm_flash.h"
-
-#if defined(CONFIG_M5281) || defined(CONFIG_M5282)
-
-#if (CONFIG_SYS_CLK>20000000)
-	#define CFM_CLK  (((long) CONFIG_SYS_CLK / (400000 * 8) + 1) | 0x40)
-#else
-	#define CFM_CLK  ((long) CONFIG_SYS_CLK / 400000 + 1)
-#endif
-
-#define cmf_backdoor_address(addr)	(((addr) & 0x0007FFFF) | 0x04000000 | \
-					 (CONFIG_SYS_MBAR & 0xC0000000))
-
-void cfm_flash_print_info (flash_info_t * info)
-{
-	printf ("Freescale: ");
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FREESCALE_ID_MCF5281 & FLASH_TYPEMASK:
-		printf ("MCF5281 internal FLASH\n");
-		break;
-	case FREESCALE_ID_MCF5282 & FLASH_TYPEMASK:
-		printf ("MCF5282 internal FLASH\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-}
-
-void cfm_flash_init (flash_info_t * info)
-{
-	int sector;
-	ulong protection;
-	MCFCFM_MCR = 0;
-	MCFCFM_CLKD = CFM_CLK;
-	debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
-		CONFIG_SYS_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
-		CONFIG_SYS_CLK);
-	MCFCFM_SACC = 0;
-	MCFCFM_DACC = 0;
-
-	if (MCFCFM_SEC & MCFCFM_SEC_KEYEN)
-		puts("CFM backdoor access is enabled\n");
-	if (MCFCFM_SEC & MCFCFM_SEC_SECSTAT)
-		puts("CFM securety is enabled\n");
-
-	#ifdef CONFIG_M5281
-		info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
-				 (FREESCALE_ID_MCF5281 & FLASH_TYPEMASK);
-		info->size = 256*1024;
-		info->sector_count = 16;
-	#else
-		info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
-				 (FREESCALE_ID_MCF5282 & FLASH_TYPEMASK);
-		info->size = 512*1024;
-		info->sector_count = 32;
-	#endif
-	protection = MCFCFM_PROT;
-	for (sector = 0; sector < info->sector_count; sector++)
-	{
-		if (sector == 0)
-		{
-			info->start[sector] = CONFIG_SYS_INT_FLASH_BASE;
-		}
-		else
-		{
-			info->start[sector] = info->start[sector-1] + 0x04000;
-		}
-		info->protect[sector] = protection & 1;
-		protection >>= 1;
-	}
-}
-
-int cfm_flash_readycheck(int checkblank)
-{
-	int	rc;
-	unsigned char state;
-
-	rc	= ERR_OK;
-	while (!(MCFCFM_USTAT & MCFCFM_USTAT_CCIF));
-	state = MCFCFM_USTAT;
-	if (state & MCFCFM_USTAT_ACCERR)
-	{
-		debug ("%s(): CFM access error",__FUNCTION__);
-		rc = ERR_PROG_ERROR;
-	}
-	if (state & MCFCFM_USTAT_PVIOL)
-	{
-		debug ("%s(): CFM protection violation",__FUNCTION__);
-		rc = ERR_PROTECTED;
-	}
-	if (checkblank)
-	{
-		if (!(state & MCFCFM_USTAT_BLANK))
-		{
-			debug ("%s(): CFM erras error",__FUNCTION__);
-			rc = ERR_NOT_ERASED;
-		}
-	}
-	MCFCFM_USTAT = state & 0x34; /* reset state */
-	return rc;
-}
-
-/* Erase 16KiB = 8 2KiB pages */
-
-int cfm_flash_erase_sector (flash_info_t * info, int sector)
-{
-	ulong address;
-	int page;
-	int rc;
-	rc= ERR_OK;
-	address = cmf_backdoor_address(info->start[sector]);
-	for (page=0; (page<8) && (rc==ERR_OK); page++)
-	{
-		*(volatile __u32*) address = 0;
-		MCFCFM_CMD = MCFCFM_CMD_PGERS;
-		MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
-		rc = cfm_flash_readycheck(0);
-		if (rc==ERR_OK)
-		{
-			*(volatile __u32*) address = 0;
-			MCFCFM_CMD = MCFCFM_CMD_PGERSVER;
-			MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
-			rc = cfm_flash_readycheck(1);
-		}
-		address += 0x800;
-	}
-	return rc;
-}
-
-int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int rc;
-	ulong dest, data;
-
-	rc = ERR_OK;
-	if (addr & 3)
-	{
-		debug ("Byte and Word alignment not supported\n");
-		rc = ERR_ALIGN;
-	}
-	if (cnt & 3)
-	{
-		debug ("Byte and Word transfer not supported\n");
-		rc = ERR_ALIGN;
-	}
-	dest = cmf_backdoor_address(addr);
-	while ((cnt>=4) && (rc == ERR_OK))
-	{
-		data = *((volatile u32 *) src);
-		*(volatile u32*) dest = data;
-		MCFCFM_CMD = MCFCFM_CMD_PGM;
-		MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
-		rc = cfm_flash_readycheck(0);
-		if (*(volatile u32*) addr != data) rc = ERR_PROG_ERROR;
-		src +=4;
-		dest +=4;
-		addr +=4;
-		cnt -=4;
-	}
-	return rc;
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-
-int cfm_flash_protect(flash_info_t * info,long sector,int prot)
-{
-	int rc;
-
-	rc= ERR_OK;
-	if (prot)
-	{
-		MCFCFM_PROT |= (1<<sector);
-		info->protect[sector]=1;
-	}
-	else
-	{
-		MCFCFM_PROT &= ~(1<<sector);
-		info->protect[sector]=0;
-	}
-	return rc;
-}
-
-#endif
-
-#endif
diff --git a/board/BuS/eb_cpu5282/cfm_flash.h b/board/BuS/eb_cpu5282/cfm_flash.h
deleted file mode 100644
index ed4e794..0000000
--- a/board/BuS/eb_cpu5282/cfm_flash.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Basic Flash Driver for Freescale MCF 5282 internal FLASH
- *
- * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CFM_FLASH_H_
-#define __CFM_FLASH_H_
-
-#define	FREESCALE_MANUFACT 0xFACFFACF
-#define	FREESCALE_ID_MCF5281 0x5281
-#define	FREESCALE_ID_MCF5282 0x5282
-
-extern void cfm_flash_print_info (flash_info_t * info);
-extern int cfm_flash_erase_sector (flash_info_t * info, int sector);
-extern void cfm_flash_init (flash_info_t * info);
-extern int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-extern int cfm_flash_protect(flash_info_t * info,long sector,int prot);
-#endif
-
-#endif
diff --git a/board/BuS/eb_cpu5282/eb_cpu5282.c b/board/BuS/eb_cpu5282/eb_cpu5282.c
index d64ad1b..f73431e 100644
--- a/board/BuS/eb_cpu5282/eb_cpu5282.c
+++ b/board/BuS/eb_cpu5282/eb_cpu5282.c
@@ -35,18 +35,19 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_VIDEO
 unsigned long display_width;
 unsigned long display_height;
+#endif
 
 /*---------------------------------------------------------------------------*/
 
 int checkboard (void)
 {
-	puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
+	puts("Board: EB+CPU5282 (BuS Elektronik GmbH & Co. KG)\n");
 #if (CONFIG_SYS_TEXT_BASE ==  CONFIG_SYS_INT_FLASH_BASE)
-	puts ("       Boot from Internal FLASH\n");
+	puts("       Boot from Internal FLASH\n");
 #endif
-
 	return 0;
 }
 
@@ -55,29 +56,39 @@ phys_size_t initdram (int board_type)
 	int size, i;
 
 	size = 0;
-	MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6
-			| MCFSDRAMC_DCR_RC ((15 * CONFIG_SYS_CLK) >> 4);
+	MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6 |
+			MCFSDRAMC_DCR_RC((15 * CONFIG_SYS_CLK / 1000000) >> 4);
+	asm (" nop");
 #ifdef CONFIG_SYS_SDRAM_BASE0
-
-	MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE0)
-			| MCFSDRAMC_DACR_CASL (1)
-			| MCFSDRAMC_DACR_CBM (3)
-			| MCFSDRAMC_DACR_PS_16;
+	MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CONFIG_SYS_SDRAM_BASE0)|
+		MCFSDRAMC_DACR_CASL(1) | MCFSDRAMC_DACR_CBM(3) |
+		MCFSDRAMC_DACR_PS_32;
+	asm (" nop");
 
 	MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V;
+	asm (" nop");
 
 	MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
+	asm (" nop");
+	for (i = 0; i < 10; i++)
+		asm (" nop");
 
-	*(unsigned short *) (CONFIG_SYS_SDRAM_BASE0) = 0xA5A5;
+	*(unsigned long *)(CONFIG_SYS_SDRAM_BASE0) = 0xA5A5A5A5;
+	asm (" nop");
 	MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
+	asm (" nop");
+
 	for (i = 0; i < 2000; i++)
 		asm (" nop");
-	mbar_writeLong (MCFSDRAMC_DACR0,
-			mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS);
-	*(unsigned int *) (CONFIG_SYS_SDRAM_BASE0 + 0x220) = 0xA5A5;
-	size += CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+
+	MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IMRS;
+	asm (" nop");
+	/* write SDRAM mode register */
+	*(unsigned long *)(CONFIG_SYS_SDRAM_BASE0 + 0x80440) = 0xA5A5A5A5;
+	asm (" nop");
+	size += CONFIG_SYS_SDRAM_SIZE0 * 1024 * 1024;
 #endif
-#ifdef CONFIG_SYS_SDRAM_BASE1
+#ifdef CONFIG_SYS_SDRAM_BASE1xx
 	MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE1)
 			| MCFSDRAMC_DACR_CASL (1)
 			| MCFSDRAMC_DACR_CBM (3)
@@ -134,38 +145,74 @@ int testdram (void)
 }
 #endif
 
+#if defined(CONFIG_HW_WATCHDOG)
+
+void hw_watchdog_init(void)
+{
+	char *s;
+	int enable;
+
+	enable = 1;
+	s = getenv("watchdog");
+	if (s != NULL)
+		if ((strncmp(s, "off", 3) == 0) || (strncmp(s, "0", 1) == 0))
+			enable = 0;
+	if (enable)
+		MCFGPTA_GPTDDR  |= (1<<2);
+	else
+		MCFGPTA_GPTDDR  &= ~(1<<2);
+}
+
+void hw_watchdog_reset(void)
+{
+	MCFGPTA_GPTPORT  ^= (1<<2);
+}
+#endif
+
 int misc_init_r(void)
 {
 #ifdef	CONFIG_HW_WATCHDOG
 	hw_watchdog_init();
 #endif
-#ifndef CONFIG_VIDEO
-	vcxk_init(16, 16);
-#endif
 	return 1;
 }
 
-#if defined(CONFIG_VIDEO)
+void __led_toggle(led_id_t mask)
+{
+	MCFGPTA_GPTPORT ^= (1 << 3);
+}
 
-/*
- ****h* EB+CPU5282-T1/drv_video_init
- * FUNCTION
- ***
- */
+void __led_init(led_id_t mask, int state)
+{
+	__led_set(mask, state);
+	MCFGPTA_GPTDDR  |= (1 << 3);
+}
+
+void __led_set(led_id_t mask, int state)
+{
+	if (state == STATUS_LED_ON)
+		MCFGPTA_GPTPORT |= (1 << 3);
+	else
+		MCFGPTA_GPTPORT &= ~(1 << 3);
+}
+
+#if defined(CONFIG_VIDEO)
 
 int drv_video_init(void)
 {
 	char *s;
+#ifdef CONFIG_SPLASH_SCREEN
 	unsigned long splash;
-
+#endif
 	printf("Init Video as ");
-
-	if ((s = getenv("displaywidth")) != NULL)
+	s = getenv("displaywidth");
+	if (s != NULL)
 		display_width = simple_strtoul(s, NULL, 10);
 	else
 		display_width = 256;
 
-	if ((s = getenv("displayheight")) != NULL)
+	s = getenv("displayheight");
+	if (s != NULL)
 		display_height = simple_strtoul(s, NULL, 10);
 	else
 		display_height = 256;
@@ -178,10 +225,9 @@ int drv_video_init(void)
 	vcxk_init(display_width, display_height);
 
 #ifdef CONFIG_SPLASH_SCREEN
-	if ((s = getenv("splashimage")) != NULL) {
-		debug("use splashimage: %s\n", s);
+	s = getenv("splashimage");
+	if (s != NULL) {
 		splash = simple_strtoul(s, NULL, 16);
-		debug("use splashimage: %x\n", splash);
 		vcxk_acknowledge_wait();
 		video_display_bitmap(splash, 0, 0);
 	}
diff --git a/board/BuS/eb_cpu5282/flash.c b/board/BuS/eb_cpu5282/flash.c
deleted file mode 100644
index 8b7f957..0000000
--- a/board/BuS/eb_cpu5282/flash.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * (C) Copyright 2005
- * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * Based On
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include  "cfm_flash.h"
-
-#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
-#define FLASH_BANK_SIZE 0x200000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (AMD_MANUFACT & FLASH_VENDMASK):
-		printf ("AMD: ");
-		switch (info->flash_id & FLASH_TYPEMASK) {
-		case (AMD_ID_LV160B & FLASH_TYPEMASK):
-			printf ("AM29LV160B (16Bit)\n");
-			break;
-		default:
-			printf ("Unknown Chip Type\n");
-			break;
-		}
-		break;
-	case FREESCALE_MANUFACT & FLASH_VENDMASK:
-		cfm_flash_print_info (info);
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	puts ("  Size: ");
-	if ((info->size >> 20) > 0)
-	{
-		printf ("%ld MiB",info->size >> 20);
-	}
-	else
-	{
-		printf ("%ld KiB",info->size >> 10);
-	}
-	printf (" in %d Sectors\n", info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 4) == 0) {
-			printf ("\n    ");
-		}
-		printf ("%02d: %08lX%s  ", i,info->start[i],
-			info->protect[i] ? " P" : "  ");
-	}
-	printf ("\n\n");
-}
-
-unsigned long flash_init (void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-
-		switch (i)
-		{
-		case 1:
-			flash_info[i].flash_id =
-				(AMD_MANUFACT & FLASH_VENDMASK) |
-				(AMD_ID_LV160B & FLASH_TYPEMASK);
-			flash_info[i].size = FLASH_BANK_SIZE;
-			flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-			memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-			flashbase = PHYS_FLASH_1;
-			for (j = 0; j < flash_info[i].sector_count; j++) {
-				if (j == 0) {
-					/* 1st is 16 KiB */
-					flash_info[i].start[j] = flashbase;
-				}
-				if ((j >= 1) && (j <= 2)) {
-				/* 2nd and 3rd are 8 KiB */
-					flash_info[i].start[j] =
-						flashbase + 0x4000 + 0x2000 * (j - 1);
-				}
-				if (j == 3) {
-					/* 4th is 32 KiB */
-					flash_info[i].start[j] = flashbase + 0x8000;
-				}
-				if ((j >= 4) && (j <= 34)) {
-					/* rest is 256 KiB */
-					flash_info[i].start[j] =
-						flashbase + 0x10000 + 0x10000 * (j - 4);
-				}
-			}
-			break;
-		case 0:
-			cfm_flash_init (&flash_info[i]);
-			break;
-		default:
-			panic ("configured to many flash banks!\n");
-		}
-
-		size += flash_info[i].size;
-	}
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]);
-
-	return size;
-}
-
-#define CMD_READ_ARRAY		0x00F0
-#define CMD_UNLOCK1		0x00AA
-#define CMD_UNLOCK2		0x0055
-#define CMD_ERASE_SETUP		0x0080
-#define CMD_ERASE_CONFIRM	0x0030
-#define CMD_PROGRAM		0x00A0
-#define CMD_UNLOCK_BYPASS	0x0020
-
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(info->start[0] + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(info->start[0] + (0x000002AA<<1)))
-
-
-#define BIT_ERASE_DONE		0x0080
-#define BIT_RDY_MASK		0x0080
-#define BIT_PROGRAM_ERROR	0x0020
-#define BIT_TIMEOUT		0x80000000	/* our flag */
-
-#define ERR_READY -1
-
-int amd_flash_erase_sector(flash_info_t * info, int sector)
-{
-	int state;
-	ulong result;
-	ulong start;
-
-	volatile u16 *addr =
-				(volatile u16 *) (info->start[sector]);
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	*addr = CMD_ERASE_CONFIRM;
-
-	/* wait until flash is ready */
-	state = 0;
-	start = get_timer(0);
-
-	do {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-			state = ERR_TIMOUT;
-		}
-
-		if (!state && (result & 0xFFFF) & BIT_ERASE_DONE)
-			state = ERR_READY;
-	}
-	while (!state);
-	if (state == ERR_READY)
-		state = ERR_OK;
-
-	MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
-	return state;
-}
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int iflag, cflag;
-	int sector;
-	int rc;
-
-	rc = ERR_OK;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-	{
-		rc = ERR_UNKNOWN_FLASH_TYPE;
-	} /* (info->flash_id == FLASH_UNKNOWN) */
-
-	if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count)
-	{
-		rc = ERR_INVAL;
-	}
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) {
-
-		if (info->protect[sector])
-		{
-			putc('P'); /*  protected sector will not erase */
-		}
-		else
-		{
-			/* erase on unprotected sector */
-			puts("E\b");
-			switch (info->flash_id & FLASH_VENDMASK)
-			{
-			case (AMD_MANUFACT & FLASH_VENDMASK):
-				rc = amd_flash_erase_sector(info,sector);
-				break;
-			case (FREESCALE_MANUFACT & FLASH_VENDMASK):
-				rc = cfm_flash_erase_sector(info,sector);
-				break;
-			default:
-				return ERR_UNKNOWN_FLASH_VENDOR;
-			}
-			putc('.');
-		}
-	}
-	if (rc!=ERR_OK)
-	{
-		printf ("\n   ");
-		flash_perror (rc);
-	}
-	else
-	{
-		printf (" done\n");
-	}
-
-	udelay (10000);	/* allow flash to settle - wait 10 ms */
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return rc;
-}
-
-volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
-{
-	volatile u16 *addr;
-	ulong result;
-	int cflag, iflag;
-	int state;
-	ulong start;
-
-	/*
-	 * Check if Flash is (sufficiently) erased
-	 */
-	addr = (volatile u16 *) dest;
-
-	result = *addr;
-	if ((result & data) != data)
-		return ERR_NOT_ERASED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_PROGRAM;
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait until flash is ready */
-	state = 0;
-	do {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				state = ERR_TIMOUT;
-		}
-		if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
-			state = ERR_READY;
-
-	} while (!state);
-
-	*addr = CMD_READ_ARRAY;
-
-	if (state == ERR_READY)
-		state = ERR_OK;
-	if ((*addr != data) && (state != ERR_TIMOUT))
-		state = ERR_PROG_ERROR;
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return state;
-}
-
-int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int rc;
-	ulong dest;
-	u16 data;
-
-	rc = ERR_OK;
-	if (addr & 1)
-	{
-		debug ("Byte alignment not supported\n");
-		rc = ERR_ALIGN;
-	}
-	if (cnt & 1)
-	{
-		debug ("Byte transfer not supported\n");
-		rc = ERR_ALIGN;
-	}
-
-	dest = addr;
-	while ((cnt>=2) && (rc == ERR_OK))
-	{
-		data = *((volatile u16 *) src);
-		rc=amd_write_word (info,dest,data);
-		src +=2;
-		dest +=2;
-		cnt -=2;
-	}
-	return rc;
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int rc;
-
-	switch (info->flash_id & FLASH_VENDMASK)
-	{
-		case (AMD_MANUFACT & FLASH_VENDMASK):
-			rc = amd_flash_write_buff(info,src,addr,cnt);
-			break;
-		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
-			rc = cfm_flash_write_buff(info,src,addr,cnt);
-			break;
-		default:
-			rc = ERR_UNKNOWN_FLASH_VENDOR;
-	}
-	return rc;
-
-}
-int amd_flash_protect(flash_info_t * info,long sector,int prot)
-{
-	int rc;
-	rc= ERR_OK;
-	if (prot)
-	{
-		info->protect[sector]=1;
-	}
-	else
-	{
-		info->protect[sector]=0;
-	}
-	return rc;
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-
-int flash_real_protect(flash_info_t * info,long sector,int prot)
-{
-	int rc;
-
-	switch (info->flash_id & FLASH_VENDMASK)
-	{
-		case (AMD_MANUFACT & FLASH_VENDMASK):
-			rc = amd_flash_protect(info,sector,prot);
-			break;
-		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
-			rc = cfm_flash_protect(info,sector,prot);
-			break;
-		default:
-			rc = ERR_UNKNOWN_FLASH_VENDOR;
-	}
-	return rc;
-}
-
-#endif
diff --git a/board/a3m071/Makefile b/board/a3m071/Makefile
new file mode 100644
index 0000000..6f961fb
--- /dev/null
+++ b/board/a3m071/Makefile
@@ -0,0 +1,36 @@
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/a3m071/README b/board/a3m071/README
new file mode 100644
index 0000000..7698614
--- /dev/null
+++ b/board/a3m071/README
@@ -0,0 +1,80 @@
+------------------------------------------------------------------------
+A3M071 board support
+------------------------------------------------------------------------
+
+
+SPL NOR flash support:
+----------------------
+To boot fast into the OS (Linux), this board port integrates the SPL
+framework. This means, that a special, stripped-down version of
+U-Boot runs in the beginning. In the case of the A3M071 board, this
+SPL U-Boot version is less than 16 KiB big. This SPL U-Boot can either
+boot the OS (Linux) or a "real", full-blown U-Boot. This detection
+on whether to boot Linux or U-Boot is done by using the "boot_os"
+environment variable. If "boot_os" is set to "yes", Linux will be
+loaded and booted from the SPL U-Boot version. Otherwise, the
+full-blown U-Boot version will be loaded and run.
+
+Enabling Linux booting:
+-----------------------
+From U-Boot:
+=> setenv boot_os yes
+=> saveenv
+
+From Linux:
+$ fw_setenv boot_os yes
+
+Enabling U-Boot booting:
+------------------------
+From U-Boot:
+=> setenv boot_os no
+=> saveenv
+
+From Linux:
+$ fw_setenv boot_os no
+
+
+Preparing Linux image(s) for booting from SPL U-Boot:
+-----------------------------------------------------
+To boot the Linux kernel from the SPL, the DT blob (fdt) needs to get
+prepard/patched first. U-Boot usually inserts some dynamic values into
+the DT binary (blob), e.g. autodetected memory size, MAC addresses,
+clocks speeds etc. To generate this patched DT blob, you can use
+the following command:
+
+1. Load fdt blob to SDRAM:
+=> tftp 1800000 a3m071/a3m071.dtb
+
+2. Set bootargs as desired for Linux booting (e.g. flash_mtd):
+=> run mtdargs addip2 addtty
+
+3. Use "fdt" commands to patch the DT blob:
+=> fdt addr 1800000
+=> fdt boardsetup
+=> fdt chosen
+
+4. Display patched DT blob (optional):
+=> fdt print
+
+5. Save fdt to NOR flash:
+=> erase fc060000 fc07ffff
+=> cp.b 1800000 fc060000 10000
+
+All this can be integrated into an environment command:
+=> setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip2 addtty; \
+	fdt addr 1800000;fdt boardsetup;erase fc060000 fc07ffff; \
+	cp.b 1800000 fc060000 10000'
+=> saveenv
+
+After this, only "run upd_fdt" needs to get called to load, patch
+and save the DT blob into NOR flash.
+
+Additionally, the Linux kernel image has to be saved uncompressed in
+its uImage file (and not gzip compressed). This can be done with this
+command:
+
+$ mkimage -A ppc -O linux -T kernel -C none -a 0 -e 0 \
+	-n "Linux Kernel Image" -d vmlinux.bin uImage.uncompressed
+
+------------------------------------------------------------------------
+Stefan Roese, 2012-08-23
diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c
new file mode 100644
index 0000000..89ced82
--- /dev/null
+++ b/board/a3m071/a3m071.c
@@ -0,0 +1,335 @@
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2006
+ * MicroSys GmbH
+ *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+#include <miiphy.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#include "mt46v16m16-75.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CONFIG_SYS_RAMBOOT) && \
+	(defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD))
+static void sdram_start(int hi_addr)
+{
+	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+	long control = SDRAM_CONTROL | hi_addr_bit;
+
+	/* unlock mode register */
+	out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000);
+
+	/* precharge all banks */
+	out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
+
+#ifdef SDRAM_DDR
+	/* set mode register: extended mode */
+	out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_EMODE);
+
+	/* set mode register: reset DLL */
+	out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE | 0x04000000);
+#endif
+
+	/* precharge all banks */
+	out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
+
+	/* auto refresh */
+	out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004);
+
+	/* set mode register */
+	out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
+
+	/* normal operation */
+	out_be32((void *)MPC5XXX_SDRAM_CTRL, control);
+}
+#endif
+
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ * use of CONFIG_SYS_SDRAM_BASE. The code does not work if
+ * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000.
+ */
+phys_size_t initdram(int board_type)
+{
+	ulong dramsize = 0;
+	ulong dramsize2 = 0;
+	uint svr, pvr;
+#if !defined(CONFIG_SYS_RAMBOOT) && \
+	(defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD))
+	ulong test1, test2;
+
+	/* setup SDRAM chip selects */
+	out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001e);	/* 2GB at 0x0 */
+	out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000);	/* disabled */
+
+	/* setup config registers */
+	out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
+	out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
+
+#ifdef SDRAM_DDR
+	/* set tap delay */
+	out_be32((void *)MPC5XXX_CDM_PORCFG, SDRAM_TAPDELAY);
+#endif
+
+	/* find RAM size using SDRAM CS0 only */
+	sdram_start(0);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
+	sdram_start(1);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize = test1;
+	} else {
+		dramsize = test2;
+	}
+
+	/* memory smaller than 1MB is impossible */
+	if (dramsize < (1 << 20))
+		dramsize = 0;
+
+	/* set SDRAM CS0 size according to the amount of RAM found */
+	if (dramsize > 0) {
+		out_be32((void *)MPC5XXX_SDRAM_CS0CFG,
+			 0x13 + __builtin_ffs(dramsize >> 20) - 1);
+	} else {
+		out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0);	/* disabled */
+	}
+#else /* CONFIG_SYS_RAMBOOT */
+
+	/* retrieve size of memory connected to SDRAM CS0 */
+	dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF;
+	if (dramsize >= 0x13)
+		dramsize = (1 << (dramsize - 0x13)) << 20;
+	else
+		dramsize = 0;
+
+	/* retrieve size of memory connected to SDRAM CS1 */
+	dramsize2 = in_be32((void *)MPC5XXX_SDRAM_CS1CFG) & 0xFF;
+	if (dramsize2 >= 0x13)
+		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+	else
+		dramsize2 = 0;
+
+#endif /* CONFIG_SYS_RAMBOOT */
+
+	/*
+	 * On MPC5200B we need to set the special configuration delay in the
+	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+	 *
+	 * "The SDelay should be written to a value of 0x00000004. It is
+	 * required to account for changes caused by normal wafer processing
+	 * parameters."
+	 */
+	svr = get_svr();
+	pvr = get_pvr();
+	if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4))
+		out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04);
+
+	return dramsize + dramsize2;
+}
+
+static void get_revisions(int *failsavelevel, int *digiboardversion,
+	int *fpgaversion)
+{
+	struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
+	u8 val;
+
+	/*
+	 * Figure out failsavelevel
+	 * see ticket dsvk#59
+	 */
+	*failsavelevel = 0;	/* 0=failsave, 1=board ok, 2=fpga ok */
+
+	/* read digitalboard-version from TMR[2..4] */
+	val = 0;
+	val |= (gpt->gpt2.sr & (1 << (31 - 23))) ? (1) : 0;
+	val |= (gpt->gpt3.sr & (1 << (31 - 23))) ? (1 << 1) : 0;
+	val |= (gpt->gpt4.sr & (1 << (31 - 23))) ? (1 << 2) : 0;
+	*digiboardversion = val;
+
+	if (*digiboardversion == 0) {
+		*failsavelevel = 1;	/* digiboard-version ok */
+
+		/* read fpga-version from TMR[5..7] */
+		val = 0;
+		val |= (gpt->gpt5.sr & (1 << (31 - 23))) ? (1) : 0;
+		val |= (gpt->gpt6.sr & (1 << (31 - 23))) ? (1 << 1) : 0;
+		val |= (gpt->gpt7.sr & (1 << (31 - 23))) ? (1 << 2) : 0;
+		*fpgaversion = val;
+
+		if (*fpgaversion == 1)
+			*failsavelevel = 2;	/* fpga-version ok */
+	}
+}
+
+/*
+ * This function is called from the SPL U-Boot version for
+ * early init stuff, that needs to be done for OS (e.g. Linux)
+ * booting. Doing it later in the real U-Boot would not work
+ * in case that the SPL U-Boot boots Linux directly.
+ */
+void spl_board_init(void)
+{
+	struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+	struct mpc5xxx_mmap_ctl *mm =
+		(struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;
+	int digiboardversion;
+	int failsavelevel;
+	int fpgaversion;
+	u32 val;
+
+	get_revisions(&failsavelevel, &digiboardversion, &fpgaversion);
+
+	val = in_be32(&mm->ipbi_ws_ctrl);
+
+	/* first clear bits 19..21 (CS3...5) */
+	val &= ~((1 << 19) | (1 << 20) | (1 << 21));
+	if (failsavelevel == 2) {
+		/* FPGA ok */
+		val |= (1 << 19) | (1 << 21);
+	}
+
+	if (failsavelevel >= 1) {
+		/* at least digiboard-version ok */
+		val |= (1 << 20);
+	}
+
+	/* And write new value back to register */
+	out_be32(&mm->ipbi_ws_ctrl, val);
+
+	/*
+	 * No need to change the pin multiplexing (MPC5XXX_GPS_PORT_CONFIG)
+	 * as all 3 config versions (failsave level) have the same setup.
+	 */
+
+	/*
+	 * Setup gpio_wkup_7 as watchdog AS INPUT to disable it - see
+	 * ticket #60
+	 *
+	 * MPC5XXX_WU_GPIO_DIR direction is already 0 (INPUT)
+	 * set bit 0(msb) to 1
+	 */
+	setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, 1 << (31 - 0));
+
+	/* setup GPIOs for status-leds if needed - see ticket #57 */
+	if (failsavelevel > 0) {
+		/* digiboard-version is OK */
+		/* LED is LOW ACTIVE - so deactivate by set output to 1 */
+		gpio->simple_dvo |= 1 << (31 - 12);
+		gpio->simple_dvo |= 1 << (31 - 13);
+		/* set GPIO direction to output */
+		gpio->simple_ddr |= 1 << (31 - 12);
+		gpio->simple_ddr |= 1 << (31 - 13);
+		/* open drain config is set to "normal output" at reset */
+		/* gpio->simple_ode &=~ ( 1 << (31-12) ); */
+		/* gpio->simple_ode &=~ ( 1 << (31-13) ); */
+		/* enable as GPIO */
+		gpio->simple_gpioe |= 1 << (31 - 12);
+		gpio->simple_gpioe |= 1 << (31 - 13);
+	}
+
+	/* setup fpga irq - see ticket #65 */
+	if (failsavelevel > 1) {
+		/*
+		 * The main irq initialisation is done in interrupts.c
+		 * mpc5xxx_init_irq
+		 */
+		struct mpc5xxx_intr *intr =
+		    (struct mpc5xxx_intr *)(MPC5XXX_ICTL);
+
+		setbits_be32(&intr->ctrl, 0x08C01801);
+
+		/*
+		 * The MBAR+0x0524 Bit 21:23 CSe are ignored here due to the
+		 * already cleared (intr_ctrl) MBAR+0x0510 ECLR[0] bit above
+		 */
+	}
+
+}
+
+int checkboard(void)
+{
+	int digiboardversion;
+	int failsavelevel;
+	int fpgaversion;
+
+	get_revisions(&failsavelevel, &digiboardversion, &fpgaversion);
+
+	puts("Board: A3M071\n");
+	printf("Rev:   failsave level       %u\n", failsavelevel);
+	printf("       digiboard IO version %u\n", digiboardversion);
+	if (failsavelevel > 0)	/* only if fpga-version red */
+		printf("       fpga IO version      %u\n", fpgaversion);
+
+	return 0;
+}
+
+/* miscellaneous platform dependent initialisations */
+int misc_init_r(void)
+{
+	/* adjust flash start and offset to detected values */
+	gd->bd->bi_flashstart = flash_info[0].start[0];
+	gd->bd->bi_flashoffset = 0;
+
+	/* adjust mapping */
+	out_be32((void *)MPC5XXX_BOOTCS_START,
+		 START_REG(gd->bd->bi_flashstart));
+	out_be32((void *)MPC5XXX_CS0_START, START_REG(gd->bd->bi_flashstart));
+	out_be32((void *)MPC5XXX_BOOTCS_STOP,
+		 STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize));
+	out_be32((void *)MPC5XXX_CS0_STOP,
+		 STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize));
+
+	return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t * bd)
+{
+	ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
+
+#ifdef CONFIG_SPL_OS_BOOT
+/*
+ * A3M071 specific implementation of spl_start_uboot()
+ *
+ * RETURN
+ * 0 if booting into OS is selected (default)
+ * 1 if booting into U-Boot is selected
+ */
+int spl_start_uboot(void)
+{
+	char s[8];
+
+	env_init();
+	getenv_f("boot_os", s, sizeof(s));
+	if ((s != NULL) && (strcmp(s, "yes") == 0))
+		return 0;
+
+	return 1;
+}
+#endif
diff --git a/board/a3m071/mt46v16m16-75.h b/board/a3m071/mt46v16m16-75.h
new file mode 100644
index 0000000..e49e996
--- /dev/null
+++ b/board/a3m071/mt46v16m16-75.h
@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define SDRAM_DDR		/* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE	0x018D0000
+#define SDRAM_EMODE	0x40090000
+#define SDRAM_CONTROL	0x704f0f00
+#define SDRAM_CONFIG1	0x73722930
+#define SDRAM_CONFIG2	0x47770000
+#define SDRAM_TAPDELAY	0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif
diff --git a/board/chromebook-x86/coreboot/Makefile b/board/chromebook-x86/coreboot/Makefile
index cfcc0df..886baf6 100644
--- a/board/chromebook-x86/coreboot/Makefile
+++ b/board/chromebook-x86/coreboot/Makefile
@@ -32,9 +32,6 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS-y	+= coreboot.o
-COBJS-$(CONFIG_PCI) += coreboot_pci.o
-SOBJS-y	+= coreboot_start16.o
 SOBJS-y	+= coreboot_start.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/board/chromebook-x86/coreboot/config.mk b/board/chromebook-x86/coreboot/config.mk
new file mode 100644
index 0000000..f720851
--- /dev/null
+++ b/board/chromebook-x86/coreboot/config.mk
@@ -0,0 +1,37 @@
+#
+# Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be
+# found in the LICENSE file.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following disclaimer
+# in the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Google Inc. nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Alternatively, this software may be distributed under the terms of the
+# GNU General Public License ("GPL") version 2 as published by the Free
+# Software Foundation.
+#
+
+HOSTCFLAGS_autoconf.mk.dep = -Wno-variadic-macros
diff --git a/board/chromebook-x86/dts/alex.dts b/board/chromebook-x86/dts/alex.dts
new file mode 100644
index 0000000..cb6a9e4
--- /dev/null
+++ b/board/chromebook-x86/dts/alex.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+/include/ "coreboot.dtsi"
+
+/ {
+        #address-cells = <1>;
+        #size-cells = <1>;
+	model = "Google Alex";
+	compatible = "google,alex", "intel,atom-pineview";
+
+	config {
+	       silent_console = <0>;
+	};
+
+        gpio: gpio {};
+
+	serial {
+		reg = <0x3f8 8>;
+		clock-frequency = <115200>;
+	};
+
+        chosen { };
+        memory { device_type = "memory"; reg = <0 0>; };
+};
diff --git a/board/chromebook-x86/dts/link.dts b/board/chromebook-x86/dts/link.dts
new file mode 100644
index 0000000..af60f59
--- /dev/null
+++ b/board/chromebook-x86/dts/link.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+/include/ "coreboot.dtsi"
+
+/ {
+        #address-cells = <1>;
+        #size-cells = <1>;
+	model = "Google Link";
+	compatible = "google,link", "intel,celeron-ivybridge";
+
+	config {
+	       silent_console = <0>;
+	};
+
+        gpio: gpio {};
+
+	serial {
+		reg = <0x3f8 8>;
+		clock-frequency = <115200>;
+	};
+
+        chosen { };
+        memory { device_type = "memory"; reg = <0 0>; };
+};
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index c41f11d..a3079db 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -28,11 +28,12 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/io.h>
 #include <nand.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <asm/gpio.h>
 #include "qong_fpga.h"
 #include <watchdog.h>
+#include <errno.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -172,10 +173,15 @@ int board_late_init(void)
 {
 	u32 val;
 	struct pmic *p;
+	int ret;
 
-	pmic_init();
-	p = get_pmic();
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return ret;
 
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return -ENODEV;
 	/* Enable RTC battery */
 	pmic_reg_read(p, REG_POWER_CTL0, &val);
 	pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
diff --git a/board/exmeritus/hww1u1a/hww1u1a.c b/board/exmeritus/hww1u1a/hww1u1a.c
index 52c22fa..89cfaad 100644
--- a/board/exmeritus/hww1u1a/hww1u1a.c
+++ b/board/exmeritus/hww1u1a/hww1u1a.c
@@ -105,7 +105,7 @@ int checkboard(void)
 	 * and delay a while before we continue.
 	 */
 	if (mpc85xx_gpio_get(GPIO_RESETS)) {
-		ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+		ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 
 		puts("Debugger detected... extra device reset enabled!\n");
 
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 36f7c4f..75725b4 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -53,6 +53,7 @@ COBJS-$(CONFIG_P2020DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P3041DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P4080DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P5020DS)		+= ics307_clk.o
+COBJS-$(CONFIG_P5040DS)		+= ics307_clk.o
 COBJS-$(CONFIG_VSC_CROSSBAR)    += vsc3316_3308.o
 
 # deal with common files for P-series corenet based devices
@@ -60,6 +61,7 @@ SUBLIB-$(CONFIG_P2041RDB)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P3041DS)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P4080DS)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P5020DS)	+= p_corenet/libp_corenet.o
+SUBLIB-$(CONFIG_P5040DS)	+= p_corenet/libp_corenet.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h
index 1d4483d..a239ee3 100644
--- a/board/freescale/common/ngpixis.h
+++ b/board/freescale/common/ngpixis.h
@@ -45,7 +45,7 @@ typedef struct ngpixis {
 	struct {
 		u8 sw;
 		u8 en;
-	} s[8];
+	} s[9];		/* s[0]..s[7] is SW1..SW8, and s[8] is SW11 */
 } __attribute__ ((packed)) ngpixis_t;
 
 /* Pointer to the PIXIS register set */
diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile
index 1fdf8b7..d79193a 100644
--- a/board/freescale/corenet_ds/Makefile
+++ b/board/freescale/corenet_ds/Makefile
@@ -31,9 +31,11 @@ COBJS-y	+= ddr.o
 COBJS-$(CONFIG_P3041DS)	+= eth_hydra.o
 COBJS-$(CONFIG_P4080DS)	+= eth_p4080.o
 COBJS-$(CONFIG_P5020DS)	+= eth_hydra.o
+COBJS-$(CONFIG_P5040DS)	+= eth_superhydra.o
 COBJS-$(CONFIG_P3041DS)	+= p3041ds_ddr.o
 COBJS-$(CONFIG_P4080DS)	+= p4080ds_ddr.o
 COBJS-$(CONFIG_P5020DS)	+= p5020ds_ddr.o
+COBJS-$(CONFIG_P5040DS)	+= p5040ds_ddr.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index a33c936..21428e3 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -45,6 +45,7 @@ int checkboard (void)
 	struct cpu_type *cpu = gd->cpu;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 	unsigned int i;
+	static const char * const freq[] = {"100", "125", "156.25", "212.5" };
 
 	printf("Board: %sDS, ", cpu->name);
 	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
@@ -83,20 +84,28 @@ int checkboard (void)
 	 * don't match.
 	 */
 	puts("SERDES Reference Clocks: ");
-#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
+#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \
+	|| defined(CONFIG_P5040DS)
 	sw = in_8(&PIXIS_SW(5));
 	for (i = 0; i < 3; i++) {
-		static const char *freq[] = {"100", "125", "156.25", "212.5" };
 		unsigned int clock = (sw >> (6 - (2 * i))) & 3;
 
 		printf("Bank%u=%sMhz ", i+1, freq[clock]);
 	}
+#ifdef CONFIG_P5040DS
+	/* On P5040DS, SW11[7:8] determines the Bank 4 frequency */
+	sw = in_8(&PIXIS_SW(9));
+	printf("Bank4=%sMhz ", freq[sw & 3]);
+#endif
 	puts("\n");
 #else
 	sw = in_8(&PIXIS_SW(3));
-	printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100);
-	printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125");
-	printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125");
+	/* SW3[2]: 0 = 100 Mhz, 1 = 125 MHz */
+	/* SW3[3]: 0 = 125 Mhz, 1 = 156.25 MHz */
+	/* SW3[4]: 0 = 125 Mhz, 1 = 156.25 MHz */
+	printf("Bank1=%sMHz ", freq[!!(sw & 0x40)]);
+	printf("Bank2=%sMHz ", freq[1 + !!(sw & 0x20)]);
+	printf("Bank3=%sMHz\n", freq[1 + !!(sw & 0x10)]);
 #endif
 
 	return 0;
@@ -168,7 +177,8 @@ int misc_init_r(void)
 	unsigned int i;
 	u8 sw;
 
-#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
+#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \
+	|| defined(CONFIG_P5040DS)
 	sw = in_8(&PIXIS_SW(5));
 	for (i = 0; i < 3; i++) {
 		unsigned int clock = (sw >> (6 - (2 * i))) & 3;
diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c
index 4a53b8d..da284cd 100644
--- a/board/freescale/corenet_ds/ddr.c
+++ b/board/freescale/corenet_ds/ddr.c
@@ -139,8 +139,8 @@ static const struct board_specific_parameters udimm0[] = {
 	{2,  1250,    4,     6,   0xff,    2,  0},
 	{2,  1350,    5,     7,   0xff,    2,  0},
 	{2,  1666,    5,     8,   0xff,    2,  0},
-	{1,   850,    4,     5,   0xff,    2,  0},
-	{1,   950,    4,     7,   0xff,    2,  0},
+	{1,  1250,    4,     6,   0xff,    2,  0},
+	{1,  1335,    4,     7,   0xff,    2,  0},
 	{1,  1666,    4,     8,   0xff,    2,  0},
 	{}
 };
diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c
new file mode 100644
index 0000000..ef9de25
--- /dev/null
+++ b/board/freescale/corenet_ds/eth_superhydra.c
@@ -0,0 +1,722 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the board muxing between the Fman Ethernet MACs and
+ * the RGMII/SGMII/XGMII PHYs on a Freescale P5040 "Super Hydra" reference
+ * board. The RGMII PHYs are the two on-board 1Gb ports.  The SGMII PHYs are
+ * provided by the standard Freescale four-port SGMII riser card.  The 10Gb
+ * XGMII PHYs are provided via the XAUI riser card.  The P5040 has 2 FMans
+ * and 5 1G interfaces and 10G interface per FMan. Based on the options in
+ * the RCW, we could have upto 3 SGMII cards and 1 XAUI card at a time.
+ *
+ * Muxing is handled via the PIXIS BRDCFG1 register.  The EMI1 bits control
+ * muxing among the RGMII PHYs and the SGMII PHYs.  The value for RGMII is
+ * always the same (0).  The value for SGMII depends on which slot the riser is
+ * inserted in.  The EMI2 bits control muxing for the the XGMII.  Like SGMII,
+ * the value is based on which slot the XAUI is inserted in.
+ *
+ * The SERDES configuration is used to determine where the SGMII and XAUI cards
+ * exist, and also which Fman's MACs are routed to which PHYs.  So for a given
+ * Fman MAC, there is one and only PHY it connects to.  MACs cannot be routed
+ * to PHYs dynamically.
+ *
+ *
+ * This file also updates the device tree in three ways:
+ *
+ * 1) The status of each virtual MDIO node that is referenced by an Ethernet
+ *    node is set to "okay".
+ *
+ * 2) The phy-handle property of each active Ethernet MAC node is set to the
+ *    appropriate PHY node.
+ *
+ * 3) The "mux value" for each virtual MDIO node is set to the correct value,
+ *    if necessary.  Some virtual MDIO nodes do not have configurable mux
+ *    values, so those values are hard-coded in the DTS.  On the HYDRA board,
+ *    the virtual MDIO node for the SGMII card needs to be updated.
+ *
+ * For all this to work, the device tree needs to have the following:
+ *
+ * 1) An alias for each PHY node that an Ethernet node could be routed to.
+ *
+ * 2) An alias for each real and virtual MDIO node that is disabled by default
+ * and might need to be enabled, and also might need to have its mux-value
+ * updated.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/fsl_serdes.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <fdt_support.h>
+#include <asm/fsl_dtsec.h>
+
+#include "../common/ngpixis.h"
+#include "../common/fman.h"
+
+#ifdef CONFIG_FMAN_ENET
+
+#define BRDCFG1_EMI1_SEL_MASK	0x70
+#define BRDCFG1_EMI1_SEL_SLOT1	0x10
+#define BRDCFG1_EMI1_SEL_SLOT2	0x20
+#define BRDCFG1_EMI1_SEL_SLOT5	0x30
+#define BRDCFG1_EMI1_SEL_SLOT6	0x40
+#define BRDCFG1_EMI1_SEL_SLOT7	0x50
+#define BRDCFG1_EMI1_SEL_SLOT3	0x60
+#define BRDCFG1_EMI1_SEL_RGMII	0x00
+#define BRDCFG1_EMI1_EN		0x08
+#define BRDCFG1_EMI2_SEL_MASK	0x06
+#define BRDCFG1_EMI2_SEL_SLOT1	0x00
+#define BRDCFG1_EMI2_SEL_SLOT2	0x02
+
+#define BRDCFG2_REG_GPIO_SEL	0x20
+
+/*
+ * BRDCFG1 mask and value for each MAC
+ *
+ * This array contains the BRDCFG1 values (in mask/val format) that route the
+ * MDIO bus to a particular RGMII or SGMII PHY.
+ */
+static struct {
+	u8 mask;
+	u8 val;
+} mdio_mux[NUM_FM_PORTS];
+
+/*
+ * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
+ * that the mapping must be determined dynamically, or that the lane maps to
+ * something other than a board slot
+ */
+static u8 lane_to_slot[] = {
+	7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0, 0, 0
+};
+
+/*
+ * Set the board muxing for a given MAC
+ *
+ * The MDIO layer calls this function every time it wants to talk to a PHY.
+ */
+void super_hydra_mux_mdio(u8 mask, u8 val)
+{
+	clrsetbits_8(&pixis->brdcfg1, mask, val);
+}
+
+struct super_hydra_mdio {
+	u8 mask;
+	u8 val;
+	struct mii_dev *realbus;
+};
+
+static int super_hydra_mdio_read(struct mii_dev *bus, int addr, int devad,
+				int regnum)
+{
+	struct super_hydra_mdio *priv = bus->priv;
+
+	super_hydra_mux_mdio(priv->mask, priv->val);
+
+	return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int super_hydra_mdio_write(struct mii_dev *bus, int addr, int devad,
+				int regnum, u16 value)
+{
+	struct super_hydra_mdio *priv = bus->priv;
+
+	super_hydra_mux_mdio(priv->mask, priv->val);
+
+	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int super_hydra_mdio_reset(struct mii_dev *bus)
+{
+	struct super_hydra_mdio *priv = bus->priv;
+
+	return priv->realbus->reset(priv->realbus);
+}
+
+static void super_hydra_mdio_set_mux(char *name, u8 mask, u8 val)
+{
+	struct mii_dev *bus = miiphy_get_dev_by_name(name);
+	struct super_hydra_mdio *priv = bus->priv;
+
+	priv->mask = mask;
+	priv->val = val;
+}
+
+static int super_hydra_mdio_init(char *realbusname, char *fakebusname)
+{
+	struct super_hydra_mdio *hmdio;
+	struct mii_dev *bus = mdio_alloc();
+
+	if (!bus) {
+		printf("Failed to allocate Hydra MDIO bus\n");
+		return -1;
+	}
+
+	hmdio = malloc(sizeof(*hmdio));
+	if (!hmdio) {
+		printf("Failed to allocate Hydra private data\n");
+		free(bus);
+		return -1;
+	}
+
+	bus->read = super_hydra_mdio_read;
+	bus->write = super_hydra_mdio_write;
+	bus->reset = super_hydra_mdio_reset;
+	sprintf(bus->name, fakebusname);
+
+	hmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+	if (!hmdio->realbus) {
+		printf("No bus with name %s\n", realbusname);
+		free(bus);
+		free(hmdio);
+		return -1;
+	}
+
+	bus->priv = hmdio;
+
+	return mdio_register(bus);
+}
+
+/*
+ * Given the following ...
+ *
+ * 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
+ * compatible string and 'addr' physical address)
+ *
+ * 2) An Fman port
+ *
+ * ... update the phy-handle property of the Ethernet node to point to the
+ * right PHY.  This assumes that we already know the PHY for each port.  That
+ * information is stored in mdio_mux[].
+ *
+ * The offset of the Fman Ethernet node is also passed in for convenience, but
+ * it is not used.
+ *
+ * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC.
+ * Inside the Fman, "ports" are things that connect to MACs.  We only call them
+ * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs
+ * and ports are the same thing.
+ */
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+			      enum fm_port port, int offset)
+{
+	enum srds_prtcl device;
+	int lane, slot, phy;
+	char alias[32];
+
+	/* RGMII and XGMII are already mapped correctly in the DTS */
+
+	if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+		device = serdes_device_from_fm_port(port);
+		lane = serdes_get_first_lane(device);
+		slot = lane_to_slot[lane];
+		phy = fm_info_get_phy_address(port);
+
+		sprintf(alias, "phy_sgmii_slot%u_%x", slot, phy);
+		fdt_set_phy_handle(fdt, compat, addr, alias);
+	}
+}
+
+#define PIXIS_SW2_LANE_23_SEL		0x80
+#define PIXIS_SW2_LANE_45_SEL		0x40
+#define PIXIS_SW2_LANE_67_SEL_MASK	0x30
+#define PIXIS_SW2_LANE_67_SEL_5		0x00
+#define PIXIS_SW2_LANE_67_SEL_6		0x20
+#define PIXIS_SW2_LANE_67_SEL_7		0x10
+#define PIXIS_SW2_LANE_8_SEL		0x08
+#define PIXIS_SW2_LANE_1617_SEL		0x04
+#define PIXIS_SW11_LANE_9_SEL		0x04
+/*
+ * Initialize the lane_to_slot[] array.
+ *
+ * On the P4080DS "Expedition" board, the mapping of SERDES lanes to board
+ * slots is hard-coded.  On the Hydra board, however, the mapping is controlled
+ * by board switch SW2, so the lane_to_slot[] array needs to be dynamically
+ * initialized.
+ */
+static void initialize_lane_to_slot(void)
+{
+	u8 sw2 = in_8(&PIXIS_SW(2));
+	/* SW11 appears in the programming model as SW9 */
+	u8 sw11 = in_8(&PIXIS_SW(9));
+
+	lane_to_slot[2] = (sw2 & PIXIS_SW2_LANE_23_SEL) ? 7 : 4;
+	lane_to_slot[3] = lane_to_slot[2];
+
+	lane_to_slot[4] = (sw2 & PIXIS_SW2_LANE_45_SEL) ? 7 : 6;
+	lane_to_slot[5] = lane_to_slot[4];
+
+	switch (sw2 & PIXIS_SW2_LANE_67_SEL_MASK) {
+	case PIXIS_SW2_LANE_67_SEL_5:
+		lane_to_slot[6] = 5;
+		break;
+	case PIXIS_SW2_LANE_67_SEL_6:
+		lane_to_slot[6] = 6;
+		break;
+	case PIXIS_SW2_LANE_67_SEL_7:
+		lane_to_slot[6] = 7;
+		break;
+	}
+	lane_to_slot[7] = lane_to_slot[6];
+
+	lane_to_slot[8] = (sw2 & PIXIS_SW2_LANE_8_SEL) ? 3 : 0;
+	lane_to_slot[9] = (sw11 & PIXIS_SW11_LANE_9_SEL) ? 0 : 3;
+
+	lane_to_slot[16] = (sw2 & PIXIS_SW2_LANE_1617_SEL) ? 1 : 0;
+	lane_to_slot[17] = lane_to_slot[16];
+}
+
+#endif /* #ifdef CONFIG_FMAN_ENET */
+
+/*
+ * Configure the status for the virtual MDIO nodes
+ *
+ * Rather than create the virtual MDIO nodes from scratch for each active
+ * virtual MDIO, we expect the DTS to have the nodes defined already, and we
+ * only enable the ones that are actually active.
+ *
+ * We assume that the DTS already hard-codes the status for all the
+ * virtual MDIO nodes to "disabled", so all we need to do is enable the
+ * active ones.
+ */
+void fdt_fixup_board_enet(void *fdt)
+{
+#ifdef CONFIG_FMAN_ENET
+	enum fm_port i;
+	int lane, slot;
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		int idx = i - FM1_DTSEC1;
+
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_SGMII:
+			lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
+			if (lane >= 0) {
+				char alias[32];
+
+				slot = lane_to_slot[lane];
+				sprintf(alias, "hydra_sg_slot%u", slot);
+				fdt_status_okay_by_alias(fdt, alias);
+				debug("Enabled MDIO node %s (slot %i)\n",
+				      alias, slot);
+			}
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			fdt_status_okay_by_alias(fdt, "hydra_rg");
+			debug("Enabled MDIO node hydra_rg\n");
+			break;
+		default:
+			break;
+		}
+	}
+
+	lane = serdes_get_first_lane(XAUI_FM1);
+	if (lane >= 0) {
+		char alias[32];
+
+		slot = lane_to_slot[lane];
+		sprintf(alias, "hydra_xg_slot%u", slot);
+		fdt_status_okay_by_alias(fdt, alias);
+		debug("Enabled MDIO node %s (slot %i)\n", alias, slot);
+	}
+
+#if CONFIG_SYS_NUM_FMAN == 2
+	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
+		int idx = i - FM2_DTSEC1;
+
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_SGMII:
+			lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
+			if (lane >= 0) {
+				char alias[32];
+
+				slot = lane_to_slot[lane];
+				sprintf(alias, "hydra_sg_slot%u", slot);
+				fdt_status_okay_by_alias(fdt, alias);
+				debug("Enabled MDIO node %s (slot %i)\n",
+				      alias, slot);
+			}
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			fdt_status_okay_by_alias(fdt, "hydra_rg");
+			debug("Enabled MDIO node hydra_rg\n");
+			break;
+		default:
+			break;
+		}
+	}
+
+	lane = serdes_get_first_lane(XAUI_FM2);
+	if (lane >= 0) {
+		char alias[32];
+
+		slot = lane_to_slot[lane];
+		sprintf(alias, "hydra_xg_slot%u", slot);
+		fdt_status_okay_by_alias(fdt, alias);
+		debug("Enabled MDIO node %s (slot %i)\n", alias, slot);
+	}
+#endif /* CONFIG_SYS_NUM_FMAN == 2 */
+#endif /* CONFIG_FMAN_ENET */
+}
+
+/*
+ * Mapping of SerDes Protocol to MDIO MUX value and PHY address.
+ *
+ * Fman 1:
+ *       DTSEC1        |   DTSEC2        |   DTSEC3        |   DTSEC4
+ *       Mux     Phy   |   Mux     Phy   |   Mux     Phy   |   Mux     Phy
+ *       Value   Addr  |   Value   Addr  |   Value   Addr  |   Value   Addr
+ * 0x00  2       1c    |   2       1d    |   2       1e    |   2       1f
+ * 0x01                |                 |   6       1c    |
+ * 0x02                |                 |   3       1c    |   3       1d
+ * 0x03  2       1c    |   2       1d    |   2       1e    |   2       1f
+ * 0x04  2       1c    |   2       1d    |   2       1e    |   2       1f
+ * 0x05                |                 |   3       1c    |   3       1d
+ * 0x06  2       1c    |   2       1d    |   2       1e    |   2       1f
+ * 0x07                |                 |   6       1c    |
+ * 0x11  2       1c    |   2       1d    |   2       1e    |   2       1f
+ * 0x2a  2             |                 |   2       1e    |   2       1f
+ * 0x34  6       1c    |   6       1d    |   4       1e    |   4       1f
+ * 0x35                |                 |   3       1c    |   3       1d
+ * 0x36  6       1c    |   6       1d    |   4       1e    |   4       1f
+ *                     |                 |                 |
+ * Fman  2:            |                 |                 |
+ *       DTSEC1        |   DTSEC2        |   DTSEC3        |   DTSEC4
+ *       EMI1          |   EMI1          |   EMI1          |   EMI1
+ *       Mux     Phy   |   Mux     Phy   |   Mux     Phy   |   Mux     Phy
+ *       Value   Addr  |   Value   Addr  |   Value   Addr  |   Value   Addr
+ * 0x00                |                 |   6       1c    |   6       1d
+ * 0x01                |                 |                 |
+ * 0x02                |                 |   6       1c    |   6       1d
+ * 0x03  3       1c    |   3       1d    |   6       1c    |   6       1d
+ * 0x04  3       1c    |   3       1d    |   6       1c    |   6       1d
+ * 0x05                |                 |   6       1c    |   6       1d
+ * 0x06                |                 |   6       1c    |   6       1d
+ * 0x07                |                 |                 |
+ * 0x11                |                 |                 |
+ * 0x2a                |                 |                 |
+ * 0x34                |                 |                 |
+ * 0x35                |                 |                 |
+ * 0x36                |                 |                 |
+ */
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+	struct fsl_pq_mdio_info dtsec_mdio_info;
+	struct tgec_mdio_info tgec_mdio_info;
+	unsigned int i, slot;
+	int lane;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
+
+	printf("Initializing Fman\n");
+
+	initialize_lane_to_slot();
+
+	/* We want to use the PIXIS to configure MUX routing, not GPIOs. */
+	setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL);
+
+	memset(mdio_mux, 0, sizeof(mdio_mux));
+
+	dtsec_mdio_info.regs =
+		(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the real 1G MDIO bus */
+	fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+	tgec_mdio_info.regs =
+		(struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+	tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+	/* Register the real 10G MDIO bus */
+	fm_tgec_mdio_init(bis, &tgec_mdio_info);
+
+	/* Register the three virtual MDIO front-ends */
+	super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
+				"SUPER_HYDRA_RGMII_MDIO");
+	super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
+				"SUPER_HYDRA_FM1_SGMII_MDIO");
+	super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
+				"SUPER_HYDRA_FM2_SGMII_MDIO");
+	super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME,
+				"SUPER_HYDRA_FM1_TGEC_MDIO");
+	super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME,
+				"SUPER_HYDRA_FM2_TGEC_MDIO");
+
+	/*
+	 * Program the DTSEC PHY addresses assuming that they are all SGMII.
+	 * For any DTSEC that's RGMII, we'll override its PHY address later.
+	 * We assume that DTSEC5 is only used for RGMII.
+	 */
+	fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+	fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+	fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR);
+	fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR);
+	fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR);
+	fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR);
+	fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+#endif
+
+	switch (srds_prtcl) {
+	case 0:
+	case 3:
+	case 4:
+	case 6:
+	case 0x11:
+	case 0x2a:
+	case 0x34:
+	case 0x36:
+		fm_info_set_phy_address(FM1_DTSEC3,
+					CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC4,
+					CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
+		break;
+	case 1:
+	case 2:
+	case 5:
+	case 7:
+	case 0x35:
+		fm_info_set_phy_address(FM1_DTSEC3,
+					CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC4,
+					CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+		break;
+	default:
+		printf("Fman:  Unsupport SerDes Protocol 0x%02x\n", srds_prtcl);
+		break;
+	}
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		int idx = i - FM1_DTSEC1;
+
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_SGMII:
+			lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
+			if (lane < 0)
+				break;
+			slot = lane_to_slot[lane];
+			mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+			debug("FM1@DTSEC%u expects SGMII in slot %u\n",
+			      idx + 1, slot);
+			switch (slot) {
+			case 1:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 |
+						BRDCFG1_EMI1_EN;
+				break;
+			case 2:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 |
+						BRDCFG1_EMI1_EN;
+				break;
+			case 3:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 |
+						BRDCFG1_EMI1_EN;
+				break;
+			case 5:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 |
+						BRDCFG1_EMI1_EN;
+				break;
+			case 6:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 |
+						BRDCFG1_EMI1_EN;
+				break;
+			case 7:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 |
+						BRDCFG1_EMI1_EN;
+				break;
+			};
+
+			super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_SGMII_MDIO",
+					mdio_mux[i].mask, mdio_mux[i].val);
+			fm_info_set_mdio(i,
+			miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO"));
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			/*
+			 * FM1 DTSEC5 is routed via EC1 to the first on-board
+			 * RGMII port. FM2 DTSEC5 is routed via EC2 to the
+			 * second on-board RGMII port. The other DTSECs cannot
+			 * be routed to RGMII.
+			 */
+			debug("FM1@DTSEC%u is RGMII at address %u\n",
+			      idx + 1, 0);
+			fm_info_set_phy_address(i, 0);
+			mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+			mdio_mux[i].val  = BRDCFG1_EMI1_SEL_RGMII |
+					   BRDCFG1_EMI1_EN;
+			super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO",
+					mdio_mux[i].mask, mdio_mux[i].val);
+			fm_info_set_mdio(i,
+				miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO"));
+			break;
+		case PHY_INTERFACE_MODE_NONE:
+			fm_info_set_phy_address(i, 0);
+			break;
+		default:
+			printf("Fman1: DTSEC%u set to unknown interface %i\n",
+			       idx + 1, fm_info_get_enet_if(i));
+			fm_info_set_phy_address(i, 0);
+			break;
+		}
+	}
+
+	/*
+	 * For 10G, we only support one XAUI card per Fman.  If present, then we
+	 * force its routing and never touch those bits again, which removes the
+	 * need for Linux to do any muxing.  This works because of the way
+	 * BRDCFG1 is defined, but it's a bit hackish.
+	 *
+	 * The PHY address for the XAUI card depends on which slot it's in. The
+	 * macros we use imply that the PHY address is based on which FM, but
+	 * that's not true.  On the P4080DS, FM1 could only use XAUI in slot 5,
+	 * and FM2 could only use a XAUI in slot 4.  On the Hydra board, we
+	 * check the actual slot and just use the macros as-is, even though
+	 * the P3041 and P5020 only have one Fman.
+	 */
+	lane = serdes_get_first_lane(XAUI_FM1);
+	if (lane >= 0) {
+		debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
+		mdio_mux[FM1_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK;
+		mdio_mux[FM1_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT2;
+		super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO",
+					mdio_mux[i].mask, mdio_mux[i].val);
+	}
+
+	fm_info_set_mdio(FM1_10GEC1,
+			miiphy_get_dev_by_name("SUPER_HYDRA_FM1_TGEC_MDIO"));
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
+		int idx = i - FM2_DTSEC1;
+
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_SGMII:
+			lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
+			if (lane < 0)
+				break;
+			slot = lane_to_slot[lane];
+			mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+			debug("FM2@DTSEC%u expects SGMII in slot %u\n",
+			      idx + 1, slot);
+			switch (slot) {
+			case 1:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 |
+						BRDCFG1_EMI1_EN;
+				break;
+			case 2:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 |
+						BRDCFG1_EMI1_EN;
+				break;
+			case 3:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 |
+						BRDCFG1_EMI1_EN;
+				break;
+			case 5:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 |
+						BRDCFG1_EMI1_EN;
+				break;
+			case 6:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 |
+						BRDCFG1_EMI1_EN;
+				break;
+			case 7:
+				mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 |
+						BRDCFG1_EMI1_EN;
+				break;
+			};
+
+			super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_SGMII_MDIO",
+					mdio_mux[i].mask, mdio_mux[i].val);
+			fm_info_set_mdio(i,
+			miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO"));
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			/*
+			 * FM1 DTSEC5 is routed via EC1 to the first on-board
+			 * RGMII port. FM2 DTSEC5 is routed via EC2 to the
+			 * second on-board RGMII port. The other DTSECs cannot
+			 * be routed to RGMII.
+			 */
+			debug("FM2@DTSEC%u is RGMII at address %u\n",
+			      idx + 1, 1);
+			fm_info_set_phy_address(i, 1);
+			mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+			mdio_mux[i].val  = BRDCFG1_EMI1_SEL_RGMII |
+					BRDCFG1_EMI1_EN;
+			super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO",
+					mdio_mux[i].mask, mdio_mux[i].val);
+			fm_info_set_mdio(i,
+			miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO"));
+			break;
+		case PHY_INTERFACE_MODE_NONE:
+			fm_info_set_phy_address(i, 0);
+			break;
+		default:
+			printf("Fman2: DTSEC%u set to unknown interface %i\n",
+				idx + 1, fm_info_get_enet_if(i));
+			fm_info_set_phy_address(i, 0);
+			break;
+		}
+	}
+
+	/*
+	 * For 10G, we only support one XAUI card per Fman.  If present, then we
+	 * force its routing and never touch those bits again, which removes the
+	 * need for Linux to do any muxing.  This works because of the way
+	 * BRDCFG1 is defined, but it's a bit hackish.
+	 *
+	 * The PHY address for the XAUI card depends on which slot it's in. The
+	 * macros we use imply that the PHY address is based on which FM, but
+	 * that's not true.  On the P4080DS, FM1 could only use XAUI in slot 5,
+	 * and FM2 could only use a XAUI in slot 4.  On the Hydra board, we
+	 * check the actual slot and just use the macros as-is, even though
+	 * the P3041 and P5020 only have one Fman.
+	 */
+	lane = serdes_get_first_lane(XAUI_FM2);
+	if (lane >= 0) {
+		debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
+		mdio_mux[FM2_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK;
+		mdio_mux[FM2_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT1;
+		super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO",
+					mdio_mux[i].mask, mdio_mux[i].val);
+	}
+
+	fm_info_set_mdio(FM2_10GEC1,
+			miiphy_get_dev_by_name("SUPER_HYDRA_FM2_TGEC_MDIO"));
+
+#endif
+
+	cpu_eth_init(bis);
+#endif
+
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/corenet_ds/p5040ds_ddr.c b/board/freescale/corenet_ds/p5040ds_ddr.c
new file mode 100644
index 0000000..e65de36
--- /dev/null
+++ b/board/freescale/corenet_ds/p5040ds_ddr.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+fixed_ddr_parm_t fixed_ddr_parm_0[] = {
+	{0, 0, NULL}
+};
+
+fixed_ddr_parm_t fixed_ddr_parm_1[] = {
+	{0, 0, NULL}
+};
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index a275d3a..418c06b 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -184,7 +184,7 @@ void lbc_sdram_init(void)
 phys_size_t fixed_sdram(void)
 {
   #ifndef CONFIG_SYS_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
 
 	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
 	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 285edbc..a4f48bb 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -389,7 +389,7 @@ void lbc_sdram_init(void)
 phys_size_t fixed_sdram(void)
 {
   #ifndef CONFIG_SYS_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
 
 	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
 	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index d119c65..0d3b418 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -247,7 +247,7 @@ int checkboard (void)
 #if !defined(CONFIG_SPD_EEPROM)
 phys_size_t fixed_sdram(void)
 {
-	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 	uint d_init;
 
 	out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index 9f8bc53..bc60632 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -30,8 +30,9 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
 #include <watchdog.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
+#include <errno.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -83,10 +84,15 @@ int board_late_init(void)
 {
 	u32 val;
 	struct pmic *p;
+	int ret;
 
-	pmic_init();
-	p = get_pmic();
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return ret;
 
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return -ENODEV;
 	/* Enable RTC battery */
 	pmic_reg_read(p, REG_POWER_CTL0, &val);
 	pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index 4d8f2f5..2aa000f 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -31,7 +31,7 @@
 #include <asm/arch/mx35_pins.h>
 #include <asm/arch/iomux.h>
 #include <i2c.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
@@ -228,7 +228,9 @@ int board_init(void)
 static inline int pmic_detect(void)
 {
 	unsigned int id;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("FSL_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	pmic_reg_read(p, REG_IDENTIFICATION, &id);
 
@@ -252,10 +254,14 @@ int board_late_init(void)
 	u8 val;
 	u32 pmic_val;
 	struct pmic *p;
+	int ret;
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return ret;
 
-	pmic_init();
 	if (pmic_detect()) {
-		p = get_pmic();
+		p = pmic_get("FSL_PMIC");
 		mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION |
 					MUX_CONFIG_ALT1);
 
diff --git a/board/freescale/mx51evk/Makefile b/board/freescale/mx51evk/Makefile
index 224eaa3..2310fe1 100644
--- a/board/freescale/mx51evk/Makefile
+++ b/board/freescale/mx51evk/Makefile
@@ -23,8 +23,10 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= mx51evk.o
+COBJS-y			+= mx51evk.o
+COBJS-$(CONFIG_VIDEO)	+= mx51evk_video.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 421d8c2..d1ef431 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -30,19 +30,14 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/clock.h>
+#include <asm/imx-common/mx5_video.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mc13892.h>
 #include <usb/ehci-fsl.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-#define MX51EVK_LCD_3V3		IMX_GPIO_NR(4, 9)
-#define MX51EVK_LCD_5V		IMX_GPIO_NR(4, 10)
-#define MX51EVK_LCD_BACKLIGHT	IMX_GPIO_NR(3, 4)
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -252,9 +247,15 @@ static void power_init(void)
 	unsigned int val;
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
 	struct pmic *p;
+	int ret;
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return;
 
-	pmic_init();
-	p = get_pmic();
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return;
 
 	/* Write needed to Power Gate 2 register */
 	pmic_reg_read(p, REG_POWER_MISC, &val);
@@ -471,54 +472,6 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
-static struct fb_videomode const claa_wvga = {
-	.name		= "CLAA07LC0ACW",
-	.refresh	= 57,
-	.xres		= 800,
-	.yres		= 480,
-	.pixclock	= 37037,
-	.left_margin	= 40,
-	.right_margin	= 60,
-	.upper_margin	= 10,
-	.lower_margin	= 10,
-	.hsync_len	= 20,
-	.vsync_len	= 10,
-	.sync		= 0,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-void lcd_iomux(void)
-{
-	/* DI2_PIN15 */
-	mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4);
-
-	/* Pad settings for MX51_PIN_DI2_DISP_CLK */
-	mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE |
-			  PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
-			  PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW);
-
-	/* Turn on 3.3V voltage for LCD */
-	mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3);
-	gpio_direction_output(MX51EVK_LCD_3V3, 1);
-
-	/* Turn on 5V voltage for LCD */
-	mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3);
-	gpio_direction_output(MX51EVK_LCD_5V, 1);
-
-	/* Turn on GPIO backlight */
-	mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
-	mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT,
-							INPUT_CTL_PATH1);
-	gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
-}
-
-void lcd_enable(void)
-{
-	int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
-	if (ret)
-		printf("LCD cannot be configured: %d\n", ret);
-}
-
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
@@ -526,7 +479,7 @@ int board_early_init_f(void)
 #ifdef CONFIG_USB_EHCI_MX5
 	setup_usb_h1();
 #endif
-	lcd_iomux();
+	setup_iomux_lcd();
 
 	return 0;
 }
diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c
new file mode 100644
index 0000000..f036cf7
--- /dev/null
+++ b/board/freescale/mx51evk/mx51evk_video.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/list.h>
+#include <asm/gpio.h>
+#include <asm/arch/iomux.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+#define MX51EVK_LCD_3V3		IMX_GPIO_NR(4, 9)
+#define MX51EVK_LCD_5V		IMX_GPIO_NR(4, 10)
+#define MX51EVK_LCD_BACKLIGHT	IMX_GPIO_NR(3, 4)
+
+static struct fb_videomode const claa_wvga = {
+	.name		= "CLAA07LC0ACW",
+	.refresh	= 57,
+	.xres		= 800,
+	.yres		= 480,
+	.pixclock	= 37037,
+	.left_margin	= 40,
+	.right_margin	= 60,
+	.upper_margin	= 10,
+	.lower_margin	= 10,
+	.hsync_len	= 20,
+	.vsync_len	= 10,
+	.sync		= 0,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
+void setup_iomux_lcd(void)
+{
+	/* DI2_PIN15 */
+	mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4);
+
+	/* Pad settings for MX51_PIN_DI2_DISP_CLK */
+	mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE |
+			  PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+			  PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW);
+
+	/* Turn on 3.3V voltage for LCD */
+	mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3);
+	gpio_direction_output(MX51EVK_LCD_3V3, 1);
+
+	/* Turn on 5V voltage for LCD */
+	mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3);
+	gpio_direction_output(MX51EVK_LCD_5V, 1);
+
+	/* Turn on GPIO backlight */
+	mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
+	mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT,
+							INPUT_CTL_PATH1);
+	gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
+}
+
+void lcd_enable(void)
+{
+	int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
+	if (ret)
+		printf("LCD cannot be configured: %d\n", ret);
+}
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
index bb4621d..1273501 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -34,7 +34,7 @@
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <asm/gpio.h>
 #include <mc13892.h>
@@ -123,9 +123,15 @@ void power_init(void)
 {
 	unsigned int val;
 	struct pmic *p;
+	int ret;
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return;
 
-	pmic_init();
-	p = get_pmic();
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return;
 
 	/* Set VDDA to 1.25V */
 	pmic_reg_read(p, REG_SW_2, &val);
diff --git a/board/freescale/mx53loco/Makefile b/board/freescale/mx53loco/Makefile
index 8bc69a9..3be17c5 100644
--- a/board/freescale/mx53loco/Makefile
+++ b/board/freescale/mx53loco/Makefile
@@ -22,8 +22,10 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= mx53loco.o
+COBJS-y			+= mx53loco.o
+COBJS-$(CONFIG_VIDEO)	+= mx53loco_video.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index a11e883..81c511c 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -31,12 +31,13 @@
 #include <asm/arch/iomux.h>
 #include <asm/arch/clock.h>
 #include <asm/errno.h>
+#include <asm/imx-common/mx5_video.h>
 #include <netdev.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <asm/gpio.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <dialog_pmic.h>
 #include <fsl_pmic.h>
 #include <linux/fb.h>
@@ -344,10 +345,16 @@ static int power_init(void)
 	unsigned int val;
 	int ret = -1;
 	struct pmic *p;
+	int retval;
 
 	if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) {
-		pmic_dialog_init();
-		p = get_pmic();
+		retval = pmic_dialog_init(I2C_PMIC);
+		if (retval)
+			return retval;
+
+		p = pmic_get("DIALOG_PMIC");
+		if (!p)
+			return -ENODEV;
 
 		/* Set VDDA to 1.25V */
 		val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
@@ -363,8 +370,13 @@ static int power_init(void)
 	}
 
 	if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) {
-		pmic_init();
-		p = get_pmic();
+		retval = pmic_init(I2C_PMIC);
+		if (retval)
+			return retval;
+
+		p = pmic_get("DIALOG_PMIC");
+		if (!p)
+			return -ENODEV;
 
 		/* Set VDDGP to 1.25V for 1GHz on SW1 */
 		pmic_reg_read(p, REG_SW_0, &val);
@@ -412,74 +424,11 @@ static void clock_1GHz(void)
 		printf("CPU:   Switch DDR clock to 400MHz failed\n");
 }
 
-static struct fb_videomode const claa_wvga = {
-	.name		= "CLAA07LC0ACW",
-	.refresh	= 57,
-	.xres		= 800,
-	.yres		= 480,
-	.pixclock	= 37037,
-	.left_margin	= 40,
-	.right_margin	= 60,
-	.upper_margin	= 10,
-	.lower_margin	= 10,
-	.hsync_len	= 20,
-	.vsync_len	= 10,
-	.sync		= 0,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-void lcd_iomux(void)
-{
-	mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DI0_PIN15, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DI0_PIN2, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DI0_PIN3, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT0, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT1, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT2, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT3, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT4, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT5, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT6, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT7, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT8, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT9, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT10, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT11, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT12, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT13, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT14, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT15, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT16, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT17, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT18, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT19, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT20, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT21, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT22, IOMUX_CONFIG_ALT0);
-	mxc_request_iomux(MX53_PIN_DISP0_DAT23, IOMUX_CONFIG_ALT0);
-
-	/* Turn on GPIO backlight */
-	mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT1);
-	gpio_direction_output(MX53LOCO_LCD_POWER, 1);
-
-	/* Turn on display contrast */
-	mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
-	gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1);
-}
-
-void lcd_enable(void)
-{
-	int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
-	if (ret)
-		printf("LCD cannot be configured: %d\n", ret);
-}
-
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
 	setup_iomux_fec();
-	lcd_iomux();
+	setup_iomux_lcd();
 
 	return 0;
 }
diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c
new file mode 100644
index 0000000..69991e8
--- /dev/null
+++ b/board/freescale/mx53loco/mx53loco_video.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/list.h>
+#include <asm/gpio.h>
+#include <asm/arch/iomux.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+#define MX53LOCO_LCD_POWER		IMX_GPIO_NR(3, 24)
+
+static struct fb_videomode const claa_wvga = {
+	.name		= "CLAA07LC0ACW",
+	.refresh	= 57,
+	.xres		= 800,
+	.yres		= 480,
+	.pixclock	= 37037,
+	.left_margin	= 40,
+	.right_margin	= 60,
+	.upper_margin	= 10,
+	.lower_margin	= 10,
+	.hsync_len	= 20,
+	.vsync_len	= 10,
+	.sync		= 0,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
+void setup_iomux_lcd(void)
+{
+	mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DI0_PIN15, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DI0_PIN2, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DI0_PIN3, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT0, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT1, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT2, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT3, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT4, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT5, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT6, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT7, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT8, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT9, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT10, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT11, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT12, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT13, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT14, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT15, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT16, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT17, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT18, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT19, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT20, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT21, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT22, IOMUX_CONFIG_ALT0);
+	mxc_request_iomux(MX53_PIN_DISP0_DAT23, IOMUX_CONFIG_ALT0);
+
+	/* Turn on GPIO backlight */
+	mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT1);
+	gpio_direction_output(MX53LOCO_LCD_POWER, 1);
+
+	/* Turn on display contrast */
+	mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
+	gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1);
+}
+
+void lcd_enable(void)
+{
+	int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
+	if (ret)
+		printf("LCD cannot be configured: %d\n", ret);
+}
diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c
index eb11f3f..9110767 100644
--- a/board/freescale/p1023rds/p1023rds.c
+++ b/board/freescale/p1023rds/p1023rds.c
@@ -74,7 +74,7 @@ int checkboard(void)
 phys_size_t fixed_sdram(void)
 {
 #ifndef CONFIG_SYS_RAMBOOT
-	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 
 	set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1);
 
diff --git a/board/freescale/p1_p2_rdb_pc/Makefile b/board/freescale/p1_p2_rdb_pc/Makefile
index 0dcf7d1..5b45d72 100644
--- a/board/freescale/p1_p2_rdb_pc/Makefile
+++ b/board/freescale/p1_p2_rdb_pc/Makefile
@@ -24,11 +24,27 @@ include $(TOPDIR)/config.mk
 
 LIB    = $(obj)lib$(BOARD).o
 
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+
+COBJS-y	+= spl_minimal.o tlb.o law.o
+
+else
+
 COBJS-y        += $(BOARD).o
 COBJS-y        += ddr.o
 COBJS-y        += law.o
 COBJS-y        += tlb.o
 
+endif
+
 SRCS   := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS   := $(addprefix $(obj),$(COBJS-y))
 SOBJS  := $(addprefix $(obj),$(SOBJS))
diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index 88ba56f..9355536 100644
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -206,6 +206,7 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 }
 #endif /* CONFIG_SYS_DDR_RAW_TIMING */
 
+#ifdef CONFIG_SYS_DDR_CS0_BNDS
 /* Fixed sdram init -- doesn't use serial presence detect. */
 phys_size_t fixed_sdram(void)
 {
@@ -260,6 +261,7 @@ phys_size_t fixed_sdram(void)
 
 	return ddr_size;
 }
+#endif
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,
diff --git a/board/freescale/p1_p2_rdb_pc/law.c b/board/freescale/p1_p2_rdb_pc/law.c
index 0da8300..cb5e7b7 100644
--- a/board/freescale/p1_p2_rdb_pc/law.c
+++ b/board/freescale/p1_p2_rdb_pc/law.c
@@ -32,7 +32,7 @@ struct law_entry law_table[] = {
 #endif
 	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC),
 #ifdef CONFIG_SYS_NAND_BASE_PHYS
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_32K, LAW_TRGT_IF_LBC),
 #endif
 };
 
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index aa39260..5b5b86c 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -177,7 +177,7 @@ void board_gpio_init(void)
 	 */
 
 	setbits_be32(&pgpio->gpdir, 0x02130000);
-#ifndef CONFIG_SYS_RAMBOOT
+#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SPL)
 	/* init DDR3 reset signal */
 	setbits_be32(&pgpio->gpdir, 0x00200000);
 	setbits_be32(&pgpio->gpodr, 0x00200000);
diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c b/board/freescale/p1_p2_rdb_pc/spl_minimal.c
index 4c140c1..09019e9 100644
--- a/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
+++ b/board/freescale/p1_p2_rdb_pc/spl_minimal.c
@@ -23,18 +23,20 @@
 #include <ns16550.h>
 #include <asm/io.h>
 #include <nand.h>
+#include <linux/compiler.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/global_data.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifndef CONFIG_SYS_INIT_L2_ADDR
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
  */
-void sdram_init(void)
+static void sdram_init(void)
 {
-	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 
 	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
 	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
@@ -71,6 +73,7 @@ void sdram_init(void)
 
 	set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1);
 }
+#endif
 
 void board_init_f(ulong bootflag)
 {
@@ -101,15 +104,16 @@ void board_init_f(ulong bootflag)
 	__raw_writel(0x00000000, &pgpio->gpdir);
 #endif
 
+#ifndef CONFIG_SYS_INIT_L2_ADDR
 	/* Initialize the DDR3 */
 	sdram_init();
+#endif
 
 	/* copy code to RAM and jump to it - this should not return */
 	/* NOTE - code has to be copied out of NAND buffer before
 	 * other blocks can be read.
 	 */
-	relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0,
-			CONFIG_SYS_NAND_U_BOOT_RELOC);
+	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
 }
 
 void board_init_r(gd_t *gd, ulong dest_addr)
diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c
index 6d22463..3e4dffd 100644
--- a/board/freescale/p1_p2_rdb_pc/tlb.c
+++ b/board/freescale/p1_p2_rdb_pc/tlb.c
@@ -53,7 +53,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 1, BOOKE_PAGESZ_1M, 1),
 
-#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SPL_BUILD
 	/* W**G* - Flash/promjet, localbus */
 	/* This will be changed to *I*G* after relocation to RAM. */
 	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
@@ -85,7 +85,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, CONFIG_SYS_PMC_BASE, CONFIG_SYS_PMC_BASE_PHYS,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 10, BOOKE_PAGESZ_64K, 1),
-#endif
+#endif /* not SPL */
 
 #ifdef CONFIG_SYS_NAND_BASE
 	/* *I*G - NAND */
@@ -94,7 +94,17 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			0, 7, BOOKE_PAGESZ_1M, 1),
 #endif
 
-#ifdef CONFIG_SYS_RAMBOOT
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+	/* L2SRAM */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 8, BOOKE_PAGESZ_256K, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
+		      CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 12, BOOKE_PAGESZ_256K, 1),
+#else
 	/* *I*G - eSDHC/eSPI/NAND boot */
 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 			MAS3_SX|MAS3_SW|MAS3_SR, 0,
@@ -106,9 +116,9 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 9, BOOKE_PAGESZ_1G, 1),
-#endif
-#endif
-
+#endif /* P1020MBG */
+#endif /* not L2 SRAM */
+#endif /* RAMBOOT/SPL */
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index 3188f59..d4a4451 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -84,7 +84,7 @@ int checkboard(void)
 
 phys_size_t fixed_sdram(void)
 {
-	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 	uint d_init;
 
 	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
index c2b2823..69d41db 100644
--- a/board/genesi/mx51_efikamx/efikamx.c
+++ b/board/genesi/mx51_efikamx/efikamx.c
@@ -33,7 +33,7 @@
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mc13892.h>
 
@@ -173,9 +173,15 @@ static void power_init(void)
 	unsigned int val;
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
 	struct pmic *p;
+	int ret;
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return;
 
-	pmic_init();
-	p = get_pmic();
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return;
 
 	/* Write needed to Power Gate 2 register */
 	pmic_reg_read(p, REG_POWER_MISC, &val);
diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c
index 143fcef..0c2cb79 100644
--- a/board/hale/tt01/tt01.c
+++ b/board/hale/tt01/tt01.c
@@ -25,12 +25,13 @@
 #include <common.h>
 #include <netdev.h>
 #include <command.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mc13783.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/io.h>
+#include <errno.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -195,14 +196,21 @@ int board_mmc_init(bd_t *bis)
 {
 	u32 val;
 	struct pmic *p;
+	int ret;
 
 	/*
 	* this is the first driver to use the pmic, so call
 	* pmic_init() here. board_late_init() is too late for
 	* the MMC driver.
 	*/
-	pmic_init();
-	p = get_pmic();
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return ret;
+
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	/* configure pins for SDHC1 only */
 	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CLK, MUX_CTL_FUNC));
diff --git a/board/iomega/iconnect/iconnect.c b/board/iomega/iconnect/iconnect.c
index 6ee2128..8cfb4e6 100644
--- a/board/iomega/iconnect/iconnect.c
+++ b/board/iomega/iconnect/iconnect.c
@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 2009-2012
  * Wojciech Dubowik <wojciech.dubowik@neratec.com>
- * Luka Perkov <uboot@lukaperkov.net>
+ * Luka Perkov <luka@openwrt.org>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
diff --git a/board/iomega/iconnect/iconnect.h b/board/iomega/iconnect/iconnect.h
index 2fb3e5e..8b6fe1b 100644
--- a/board/iomega/iconnect/iconnect.h
+++ b/board/iomega/iconnect/iconnect.h
@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 2009-2012
  * Wojciech Dubowik <wojciech.dubowik@neratec.com>
- * Luka Perkov <uboot@lukaperkov.net>
+ * Luka Perkov <luka@openwrt.org>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
diff --git a/board/iomega/iconnect/kwbimage.cfg b/board/iomega/iconnect/kwbimage.cfg
index 6c9dfe3..4b64dab 100644
--- a/board/iomega/iconnect/kwbimage.cfg
+++ b/board/iomega/iconnect/kwbimage.cfg
@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2009-2012
 # Wojciech Dubowik <wojciech.dubowik@neratec.com>
-# Luka Perkov <uboot@lukaperkov.net>
+# Luka Perkov <luka@openwrt.org>
 #
 # See file CREDITS for list of people who contributed to this
 # project.
diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
index d316f33..0b3721e 100644
--- a/board/logicpd/am3517evm/am3517evm.c
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -25,12 +25,20 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/omap_musb.h>
+#include <asm/arch/am35x_def.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
+#include <asm/arch/musb.h>
 #include <asm/mach-types.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
 #include <i2c.h>
+#include <netdev.h>
 #include "am3517evm.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -50,6 +58,52 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_USB_MUSB_AM35X
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 16,
+	.ram_bits       = 12,
+};
+
+static struct omap_musb_board_data musb_board_data = {
+	.set_phy_power		= am35x_musb_phy_power,
+	.clear_irq		= am35x_musb_clear_irq,
+	.reset			= am35x_musb_reset,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_MUSB_HOST)
+	.mode           = MUSB_HOST,
+#elif defined(CONFIG_MUSB_GADGET)
+	.mode		= MUSB_PERIPHERAL,
+#else
+#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#endif
+	.config         = &musb_config,
+	.power          = 250,
+	.platform_ops	= &am35x_ops,
+	.board_data	= &musb_board_data,
+};
+
+static void am3517_evm_musb_init(void)
+{
+	/*
+	 * Set up USB clock/mode in the DEVCONF2 register.
+	 * USB2.0 PHY reference clock is 13 MHz
+	 */
+	clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+			CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE,
+			CONF2_REFFREQ_13MHZ | CONF2_SESENDEN |
+			CONF2_VBDTCTEN | CONF2_DATPOL);
+
+	musb_register(&musb_plat, &musb_board_data,
+			(void *)AM35XX_IPSS_USBOTGSS_BASE);
+}
+#else
+#define am3517_evm_musb_init() do {} while (0)
+#endif
+
 /*
  * Routine: misc_init_r
  * Description: Init i2c, ethernet, etc... (done here so udelay works)
@@ -62,6 +116,8 @@ int misc_init_r(void)
 
 	dieid_num_r();
 
+	am3517_evm_musb_init();
+
 	return 0;
 }
 
@@ -83,3 +139,21 @@ int board_mmc_init(bd_t *bis)
        return 0;
 }
 #endif
+
+#if defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)
+int board_eth_init(bd_t *bis)
+{
+	int rv, n = 0;
+
+	rv = cpu_eth_init(bis);
+	if (rv > 0)
+		n += rv;
+
+	rv = usb_eth_initialize(bis);
+	if (rv > 0)
+		n += rv;
+
+	return n;
+}
+#endif
+
diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c
index b7e6e41..5f0f396 100644
--- a/board/raidsonic/ib62x0/ib62x0.c
+++ b/board/raidsonic/ib62x0/ib62x0.c
@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 2011-2012
  * Gerald Kerma <dreagle@doukki.net>
- * Luka Perkov <uboot@lukaperkov.net>
+ * Luka Perkov <luka@openwrt.org>
  * Simon Baatz <gmbnomis@gmail.com>
  *
  * See file CREDITS for list of people who contributed to this
diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h
index 0118c2b..3315696 100644
--- a/board/raidsonic/ib62x0/ib62x0.h
+++ b/board/raidsonic/ib62x0/ib62x0.h
@@ -2,7 +2,7 @@
  * Copyright (C) 2011-2012
  * Gerald Kerma <dreagle@doukki.net>
  * Simon Baatz <gmbnomis@gmail.com>
- * Luka Perkov <uboot@lukaperkov.net>
+ * Luka Perkov <luka@openwrt.org>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg
index bd594eb..bade627 100644
--- a/board/raidsonic/ib62x0/kwbimage.cfg
+++ b/board/raidsonic/ib62x0/kwbimage.cfg
@@ -2,7 +2,7 @@
 # Copyright (C) 2011-2012
 # Gerald Kerma <dreagle@doukki.net>
 # Simon Baatz <gmbnomis@gmail.com>
-# Luka Perkov <uboot@lukaperkov.net>
+# Luka Perkov <luka@openwrt.org>
 #
 # See file CREDITS for list of people who contributed to this
 # project.
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index e8fb1ea..ff76963 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -25,10 +25,10 @@
 #include <common.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <usb/s3c_udc.h>
 #include <asm/arch/cpu.h>
-#include <max8998_pmic.h>
+#include <power/max8998_pmic.h>
 DECLARE_GLOBAL_DATA_PTR;
 
 static struct s5pc110_gpio *s5pc110_gpio;
@@ -41,9 +41,17 @@ int board_init(void)
 	gd->bd->bi_arch_number = MACH_TYPE_GONI;
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
-#if defined(CONFIG_PMIC)
-	pmic_init();
-#endif
+	return 0;
+}
+
+int power_init_board(void)
+{
+	int ret;
+
+	ret = pmic_init(I2C_5);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
@@ -108,7 +116,9 @@ static int s5pc1xx_phy_control(int on)
 {
 	int ret;
 	static int status;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8998_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return -1;
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index d5c681c..4724029 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -35,10 +35,13 @@
 #include <asm/arch/mipi_dsim.h>
 #include <asm/arch/watchdog.h>
 #include <asm/arch/power.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <usb/s3c_udc.h>
-#include <max8997_pmic.h>
+#include <power/max8997_pmic.h>
 #include <libtizen.h>
+#include <power/max8997_muic.h>
+#include <power/battery.h>
+#include <power/max17042_fg.h>
 
 #include "setup.h"
 
@@ -69,10 +72,6 @@ int board_init(void)
 	check_hw_revision();
 	printf("HW Revision:\t0x%x\n", board_rev);
 
-#if defined(CONFIG_PMIC)
-	pmic_init();
-#endif
-
 	return 0;
 }
 
@@ -91,6 +90,275 @@ void i2c_init_board(void)
 	s5p_gpio_direction_output(&gpio2->y4, 1, 1);
 }
 
+static void trats_low_power_mode(void)
+{
+	struct exynos4_clock *clk =
+	    (struct exynos4_clock *)samsung_get_base_clock();
+	struct exynos4_power *pwr =
+	    (struct exynos4_power *)samsung_get_base_power();
+
+	/* Power down CORE1 */
+	/* LOCAL_PWR_CFG [1:0] 0x3 EN, 0x0 DIS */
+	writel(0x0, &pwr->arm_core1_configuration);
+
+	/* Change the APLL frequency */
+	/* ENABLE (1 enable) | LOCKED (1 locked)  */
+	/* [31]              | [29]               */
+	/* FSEL      | MDIV          | PDIV            | SDIV */
+	/* [27]      | [25:16]       | [13:8]          | [2:0]      */
+	writel(0xa0c80604, &clk->apll_con0);
+
+	/* Change CPU0 clock divider */
+	/* CORE2_RATIO  | APLL_RATIO   | PCLK_DBG_RATIO | ATB_RATIO  */
+	/* [30:28]      | [26:24]      | [22:20]        | [18:16]    */
+	/* PERIPH_RATIO | COREM1_RATIO | COREM0_RATIO   | CORE_RATIO */
+	/* [14:12]      | [10:8]       | [6:4]          | [2:0]      */
+	writel(0x00000100, &clk->div_cpu0);
+
+	/* CLK_DIV_STAT_CPU0 - wait until clock gets stable (0 = stable) */
+	while (readl(&clk->div_stat_cpu0) & 0x1111111)
+		continue;
+
+	/* Change clock divider ratio for DMC */
+	/* DMCP_RATIO                  | DMCD_RATIO  */
+	/* [22:20]                     | [18:16]     */
+	/* DMC_RATIO | DPHY_RATIO | ACP_PCLK_RATIO   | ACP_RATIO */
+	/* [14:12]   | [10:8]     | [6:4]            | [2:0]     */
+	writel(0x13113117, &clk->div_dmc0);
+
+	/* CLK_DIV_STAT_DMC0 - wait until clock gets stable (0 = stable) */
+	while (readl(&clk->div_stat_dmc0) & 0x11111111)
+		continue;
+
+	/* Turn off unnecessary power domains */
+	writel(0x0, &pwr->xxti_configuration);	/* XXTI */
+	writel(0x0, &pwr->cam_configuration);	/* CAM */
+	writel(0x0, &pwr->tv_configuration);    /* TV */
+	writel(0x0, &pwr->mfc_configuration);   /* MFC */
+	writel(0x0, &pwr->g3d_configuration);   /* G3D */
+	writel(0x0, &pwr->gps_configuration);   /* GPS */
+	writel(0x0, &pwr->gps_alive_configuration);	/* GPS_ALIVE */
+
+	/* Turn off unnecessary clocks */
+	writel(0x0, &clk->gate_ip_cam);	/* CAM */
+	writel(0x0, &clk->gate_ip_tv);          /* TV */
+	writel(0x0, &clk->gate_ip_mfc);	/* MFC */
+	writel(0x0, &clk->gate_ip_g3d);	/* G3D */
+	writel(0x0, &clk->gate_ip_image);	/* IMAGE */
+	writel(0x0, &clk->gate_ip_gps);	/* GPS */
+}
+
+static int pmic_init_max8997(void)
+{
+	struct pmic *p = pmic_get("MAX8997_PMIC");
+	int i = 0, ret = 0;
+	u32 val;
+
+	if (pmic_probe(p))
+		return -1;
+
+	/* BUCK1 VARM: 1.2V */
+	val = (1200000 - 650000) / 25000;
+	ret |= pmic_reg_write(p, MAX8997_REG_BUCK1DVS1, val);
+	val = ENBUCK | ACTIVE_DISCHARGE;		/* DVS OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_BUCK1CTRL, val);
+
+	/* BUCK2 VINT: 1.1V */
+	val = (1100000 - 650000) / 25000;
+	ret |= pmic_reg_write(p, MAX8997_REG_BUCK2DVS1, val);
+	val = ENBUCK | ACTIVE_DISCHARGE;		/* DVS OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_BUCK2CTRL, val);
+
+
+	/* BUCK3 G3D: 1.1V - OFF */
+	ret |= pmic_reg_read(p, MAX8997_REG_BUCK3CTRL, &val);
+	val &= ~ENBUCK;
+	ret |= pmic_reg_write(p, MAX8997_REG_BUCK3CTRL, val);
+
+	val = (1100000 - 750000) / 50000;
+	ret |= pmic_reg_write(p, MAX8997_REG_BUCK3DVS, val);
+
+	/* BUCK4 CAMISP: 1.2V - OFF */
+	ret |= pmic_reg_read(p, MAX8997_REG_BUCK4CTRL, &val);
+	val &= ~ENBUCK;
+	ret |= pmic_reg_write(p, MAX8997_REG_BUCK4CTRL, val);
+
+	val = (1200000 - 650000) / 25000;
+	ret |= pmic_reg_write(p, MAX8997_REG_BUCK4DVS, val);
+
+	/* BUCK5 VMEM: 1.2V */
+	val = (1200000 - 650000) / 25000;
+	for (i = 0; i < 8; i++)
+		ret |= pmic_reg_write(p, MAX8997_REG_BUCK5DVS1 + i, val);
+
+	val = ENBUCK | ACTIVE_DISCHARGE;		/* DVS OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_BUCK5CTRL, val);
+
+	/* BUCK6 CAM AF: 2.8V */
+	/* No Voltage Setting Register */
+	/* GNSLCT 3.0X */
+	val = GNSLCT;
+	ret |= pmic_reg_write(p, MAX8997_REG_BUCK6CTRL, val);
+
+	/* BUCK7 VCC_SUB: 2.0V */
+	val = (2000000 - 750000) / 50000;
+	ret |= pmic_reg_write(p, MAX8997_REG_BUCK7DVS, val);
+
+	/* LDO1 VADC: 3.3V */
+	val = max8997_reg_ldo(3300000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO1CTRL, val);
+
+	/* LDO1 Disable active discharging */
+	ret |= pmic_reg_read(p, MAX8997_REG_LDO1CONFIG, &val);
+	val &= ~LDO_ADE;
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO1CONFIG, val);
+
+	/* LDO2 VALIVE: 1.1V */
+	val = max8997_reg_ldo(1100000) | EN_LDO;
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO2CTRL, val);
+
+	/* LDO3 VUSB/MIPI: 1.1V */
+	val = max8997_reg_ldo(1100000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, val);
+
+	/* LDO4 VMIPI: 1.8V */
+	val = max8997_reg_ldo(1800000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, val);
+
+	/* LDO5 VHSIC: 1.2V */
+	val = max8997_reg_ldo(1200000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO5CTRL, val);
+
+	/* LDO6 VCC_1.8V_PDA: 1.8V */
+	val = max8997_reg_ldo(1800000) | EN_LDO;
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO6CTRL, val);
+
+	/* LDO7 CAM_ISP: 1.8V */
+	val = max8997_reg_ldo(1800000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO7CTRL, val);
+
+	/* LDO8 VDAC/VUSB: 3.3V */
+	val = max8997_reg_ldo(3300000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, val);
+
+	/* LDO9 VCC_2.8V_PDA: 2.8V */
+	val = max8997_reg_ldo(2800000) | EN_LDO;
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO9CTRL, val);
+
+	/* LDO10 VPLL: 1.1V */
+	val = max8997_reg_ldo(1100000) | EN_LDO;
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO10CTRL, val);
+
+	/* LDO11 TOUCH: 2.8V */
+	val = max8997_reg_ldo(2800000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO11CTRL, val);
+
+	/* LDO12 VTCAM: 1.8V */
+	val = max8997_reg_ldo(1800000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO12CTRL, val);
+
+	/* LDO13 VCC_3.0_LCD: 3.0V */
+	val = max8997_reg_ldo(3000000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, val);
+
+	/* LDO14 MOTOR: 3.0V */
+	val = max8997_reg_ldo(3000000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO14CTRL, val);
+
+	/* LDO15 LED_A: 2.8V */
+	val = max8997_reg_ldo(2800000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, val);
+
+	/* LDO16 CAM_SENSOR: 1.8V */
+	val = max8997_reg_ldo(1800000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO16CTRL, val);
+
+	/* LDO17 VTF: 2.8V */
+	val = max8997_reg_ldo(2800000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO17CTRL, val);
+
+	/* LDO18 TOUCH_LED 3.3V */
+	val = max8997_reg_ldo(3300000) | DIS_LDO;	/* OFF */
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO18CTRL, val);
+
+	/* LDO21 VDDQ: 1.2V */
+	val = max8997_reg_ldo(1200000) | EN_LDO;
+	ret |= pmic_reg_write(p, MAX8997_REG_LDO21CTRL, val);
+
+	/* SAFEOUT for both 1 and 2: 4.9V, Active discharge, Enable */
+	val = (SAFEOUT_4_90V << 0) | (SAFEOUT_4_90V << 2) |
+		ACTDISSAFEO1 | ACTDISSAFEO2 | ENSAFEOUT1 | ENSAFEOUT2;
+	ret |= pmic_reg_write(p, MAX8997_REG_SAFEOUTCTRL, val);
+
+	if (ret) {
+		puts("MAX8997 PMIC setting error!\n");
+		return -1;
+	}
+	return 0;
+}
+
+int power_init_board(void)
+{
+	int chrg, ret;
+	struct power_battery *pb;
+	struct pmic *p_fg, *p_chrg, *p_muic, *p_bat;
+
+	ret = pmic_init(I2C_5);
+	ret |= pmic_init_max8997();
+	ret |= power_fg_init(I2C_9);
+	ret |= power_muic_init(I2C_5);
+	ret |= power_bat_init(0);
+	if (ret)
+		return ret;
+
+	p_fg = pmic_get("MAX17042_FG");
+	if (!p_fg) {
+		puts("MAX17042_FG: Not found\n");
+		return -ENODEV;
+	}
+
+	p_chrg = pmic_get("MAX8997_PMIC");
+	if (!p_chrg) {
+		puts("MAX8997_PMIC: Not found\n");
+		return -ENODEV;
+	}
+
+	p_muic = pmic_get("MAX8997_MUIC");
+	if (!p_muic) {
+		puts("MAX8997_MUIC: Not found\n");
+		return -ENODEV;
+	}
+
+	p_bat = pmic_get("BAT_TRATS");
+	if (!p_bat) {
+		puts("BAT_TRATS: Not found\n");
+		return -ENODEV;
+	}
+
+	p_fg->parent =  p_bat;
+	p_chrg->parent = p_bat;
+	p_muic->parent = p_bat;
+
+	p_bat->low_power_mode = trats_low_power_mode;
+	p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic);
+
+	pb = p_bat->pbat;
+	chrg = p_muic->chrg->chrg_type(p_muic);
+	debug("CHARGER TYPE: %d\n", chrg);
+
+	if (!p_chrg->chrg->chrg_bat_present(p_chrg)) {
+		puts("No battery detected\n");
+		return -1;
+	}
+
+	p_fg->fg->fg_battery_check(p_fg, p_bat);
+
+	if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
+		puts("CHARGE Battery !\n");
+
+	return 0;
+}
+
 int dram_init(void)
 {
 	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
@@ -200,7 +468,9 @@ static int s5pc210_phy_control(int on)
 {
 	int ret = 0;
 	u32 val = 0;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8997_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return -1;
@@ -379,7 +649,9 @@ static void lcd_reset(void)
 static int lcd_power(void)
 {
 	int ret = 0;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8997_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return 0;
@@ -439,7 +711,9 @@ static struct mipi_dsim_lcd_device mipi_lcd_device = {
 static int mipi_power(void)
 {
 	int ret = 0;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8997_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return 0;
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index afe3bb0..3d508be 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -31,13 +31,13 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/pinmux.h>
-#include <pmic.h>
-#include <usb/s3c_udc.h>
-#include <asm/arch/cpu.h>
-#include <max8998_pmic.h>
 #include <asm/arch/watchdog.h>
 #include <libtizen.h>
 #include <ld9040.h>
+#include <power/pmic.h>
+#include <usb/s3c_udc.h>
+#include <asm/arch/cpu.h>
+#include <power/max8998_pmic.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -55,7 +55,16 @@ static int get_hwrev(void)
 	return board_rev & 0xFF;
 }
 
-static void check_hw_revision(void);
+int power_init_board(void)
+{
+	int ret;
+
+	ret = pmic_init(I2C_5);
+	if (ret)
+		return ret;
+
+	return 0;
+}
 
 int dram_init(void)
 {
@@ -101,7 +110,9 @@ static unsigned short get_adc_value(int channel)
 static int adc_power_control(int on)
 {
 	int ret;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8998_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return -1;
@@ -224,7 +235,9 @@ int board_mmc_init(bd_t *bis)
 static int s5pc210_phy_control(int on)
 {
 	int ret = 0;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("MAX8998_PMIC");
+	if (!p)
+		return -ENODEV;
 
 	if (pmic_probe(p))
 		return -1;
@@ -489,10 +502,6 @@ int board_init(void)
 	gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
-#if defined(CONFIG_PMIC)
-	pmic_init();
-	init_pmic_lcd();
-#endif
 #ifdef CONFIG_SOFT_SPI
 	soft_spi_init();
 #endif
diff --git a/board/sbc8548/ddr.c b/board/sbc8548/ddr.c
index 45ec485..9508561 100644
--- a/board/sbc8548/ddr.c
+++ b/board/sbc8548/ddr.c
@@ -91,7 +91,7 @@ void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
  */
 phys_size_t fixed_sdram(void)
 {
-	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
 
 	out_be32(&ddr->cs0_bnds,	0x0000007f);
 	out_be32(&ddr->cs1_bnds,	0x008000ff);
diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c
index c8235f4..8a9ce79 100644
--- a/board/socrates/sdram.c
+++ b/board/socrates/sdram.c
@@ -41,7 +41,7 @@
  */
 phys_size_t fixed_sdram(void)
 {
-	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
 
 	/*
 	 * Disable memory controller.
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index b56a801..f0eca54 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -379,9 +379,14 @@ static struct cpsw_platform_data cpsw_data = {
 	.host_port_num		= 0,
 	.version		= CPSW_CTRL_VERSION_2,
 };
+#endif
 
+#if defined(CONFIG_DRIVER_TI_CPSW) || \
+	(defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
 int board_eth_init(bd_t *bis)
 {
+	int rv, n = 0;
+#ifdef CONFIG_DRIVER_TI_CPSW
 	uint8_t mac_addr[6];
 	uint32_t mac_hi, mac_lo;
 
@@ -400,7 +405,7 @@ int board_eth_init(bd_t *bis)
 		if (is_valid_ether_addr(mac_addr))
 			eth_setenv_enetaddr("ethaddr", mac_addr);
 		else
-			return -1;
+			goto try_usbether;
 	}
 
 	if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
@@ -413,6 +418,20 @@ int board_eth_init(bd_t *bis)
 				PHY_INTERFACE_MODE_RGMII;
 	}
 
-	return cpsw_register(&cpsw_data);
+	rv = cpsw_register(&cpsw_data);
+	if (rv < 0)
+		printf("Error %d registering CPSW switch\n", rv);
+	else
+		n += rv;
+#endif
+try_usbether:
+#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD)
+	rv = usb_eth_initialize(bis);
+	if (rv < 0)
+		printf("Error %d registering USB_ETHER\n", rv);
+	else
+		n += rv;
+#endif
+	return n;
 }
 #endif
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 6175e1d..f20ebed 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -42,6 +42,11 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>
 #include <asm/mach-types.h>
+#include <asm/omap_musb.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
 #include "beagle.h"
 #include <command.h>
 
@@ -285,6 +290,33 @@ static void beagle_dvi_pup(void)
 }
 #endif
 
+#ifdef CONFIG_USB_MUSB_OMAP2PLUS
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 16,
+	.ram_bits       = 12,
+};
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type	= MUSB_INTERFACE_ULPI,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_MUSB_HOST)
+	.mode           = MUSB_HOST,
+#elif defined(CONFIG_MUSB_GADGET)
+	.mode		= MUSB_PERIPHERAL,
+#else
+#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#endif
+	.config         = &musb_config,
+	.power          = 100,
+	.platform_ops	= &omap2430_ops,
+	.board_data	= &musb_board_data,
+};
+#endif
+
 /*
  * Routine: misc_init_r
  * Description: Configure board specific parts
@@ -466,6 +498,10 @@ int misc_init_r(void)
 	omap3_dss_enable();
 #endif
 
+#ifdef CONFIG_USB_MUSB_OMAP2PLUS
+	musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE);
+#endif
+
 	return 0;
 }
 
@@ -513,3 +549,10 @@ int ehci_hcd_stop(int index)
 }
 
 #endif /* CONFIG_USB_EHCI */
+
+#if defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)
+int board_eth_init(bd_t *bis)
+{
+	return usb_eth_initialize(bis);
+}
+#endif
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index abdd1aa..a471fec 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -34,7 +34,7 @@
 #include <asm/arch/sys_proto.h>
 #include <i2c.h>
 #include <mmc.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_esdhc.h>
 #include <fsl_pmic.h>
 #include <mc13892.h>
@@ -306,9 +306,15 @@ static void power_init_mx51(void)
 {
 	unsigned int val;
 	struct pmic *p;
+	int ret;
+
+	ret = pmic_init(I2C_PMIC);
+	if (ret)
+		return;
 
-	pmic_init();
-	p = get_pmic();
+	p = pmic_get("FSL_PMIC");
+	if (!p)
+		return;
 
 	/* Write needed to Power Gate 2 register */
 	pmic_reg_read(p, REG_POWER_MISC, &val);
diff --git a/boards.cfg b/boards.cfg
index 6f21af0..388e4a4 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -100,6 +100,7 @@ at91sam9rlek_dataflash       arm         arm926ejs   at91sam9rlek        atmel
 at91sam9rlek_nandflash       arm         arm926ejs   at91sam9rlek        atmel          at91        at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
 at91sam9x5ek_nandflash       arm         arm926ejs   at91sam9x5ek        atmel          at91        at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH
 at91sam9x5ek_spiflash        arm         arm926ejs   at91sam9x5ek        atmel          at91        at91sam9x5ek:AT91SAM9X5,SYS_USE_SPIFLASH
+at91sam9x5ek_mmc             arm         arm926ejs   at91sam9x5ek        atmel          at91        at91sam9x5ek:AT91SAM9X5,SYS_USE_MMC
 at91sam9xeek_dataflash_cs0   arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
 at91sam9xeek_dataflash_cs1   arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
 at91sam9xeek_nandflash       arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
@@ -374,7 +375,7 @@ M5235EVB                     m68k        mcf523x     m5235evb            freesca
 M5235EVB_Flash32             m68k        mcf523x     m5235evb            freescale      -           M5235EVB:NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000
 cobra5272                    m68k        mcf52x2     cobra5272           -
 idmr                         m68k        mcf52x2
-eb_cpu5282                   m68k        mcf52x2     eb_cpu5282          BuS            -           eb_cpu5282:SYS_TEXT_BASE=0xFFE00000
+eb_cpu5282                   m68k        mcf52x2     eb_cpu5282          BuS            -           eb_cpu5282:SYS_TEXT_BASE=0xFF000000
 eb_cpu5282_internal          m68k        mcf52x2     eb_cpu5282          BuS            -           eb_cpu5282:SYS_TEXT_BASE=0xF0000000
 TASREG                       m68k        mcf52x2     tasreg              esd
 M5208EVBE                    m68k        mcf52x2     m5208evbe           freescale
@@ -474,6 +475,7 @@ mpc5121ads                   powerpc     mpc512x     mpc5121ads          freesca
 mpc5121ads_rev2              powerpc     mpc512x     mpc5121ads          freescale      -           mpc5121ads:MPC5121ADS_REV2
 cmi_mpc5xx                   powerpc     mpc5xx      cmi
 PATI                         powerpc     mpc5xx      pati                mpl
+a3m071                       powerpc     mpc5xxx     a3m071
 a4m072                       powerpc     mpc5xxx     a4m072
 BC3450                       powerpc     mpc5xxx     bc3450
 canmb                        powerpc     mpc5xxx
@@ -850,6 +852,7 @@ P5020DS_SDCARD		     powerpc     mpc85xx     corenet_ds          freescale
 P5020DS_SECURE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:SECURE_BOOT
 P5020DS_SPIFLASH	     powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
 P5020DS_SRIO_PCIE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
+P5040DS                      powerpc     mpc85xx     corenet_ds          freescale
 BSC9131RDB_SPIFLASH          powerpc     mpc85xx     bsc9131rdb          freescale      -           BSC9131RDB:BSC9131RDB,SPIFLASH
 stxgp3                       powerpc     mpc85xx     stxgp3              stx
 stxssa                       powerpc     mpc85xx     stxssa              stx            -           stxssa
@@ -1099,7 +1102,7 @@ gr_cpci_ax2000               sparc       leon3       -                   gaisler
 gr_ep2s60                    sparc       leon3       -                   gaisler
 grsim                        sparc       leon3       -                   gaisler
 gr_xc3s_1500                 sparc       leon3       -                   gaisler
-coreboot-x86                 x86         x86        coreboot            chromebook-x86 coreboot    coreboot:SYS_TEXT_BASE=0xFC0000
+coreboot-x86                 x86         x86        coreboot            chromebook-x86 coreboot    coreboot:SYS_TEXT_BASE=0x01110000
 eNET                         x86         x86        eNET                -              sc520       eNET:SYS_TEXT_BASE=0x38040000
 eNET_SRAM                    x86         x86        eNET                -              sc520       eNET:SYS_TEXT_BASE=0x19000000
 # Target                     ARCH        CPU         Board name          Vendor	        SoC         Options
diff --git a/common/Makefile b/common/Makefile
index ded6318..132b3bd 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -196,6 +196,9 @@ COBJS-$(CONFIG_CMD_DFU) += cmd_dfu.o
 endif
 
 ifdef CONFIG_SPL_BUILD
+COBJS-y += cmd_nvedit.o
+COBJS-y += env_common.o
+COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
 COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
 COBJS-$(CONFIG_SPL_NET_SUPPORT) += cmd_nvedit.o
 COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o
diff --git a/common/bouncebuf.c b/common/bouncebuf.c
index 4f827f8..1df12cd 100644
--- a/common/bouncebuf.c
+++ b/common/bouncebuf.c
@@ -27,21 +27,19 @@
 #include <errno.h>
 #include <bouncebuf.h>
 
-static int addr_aligned(void *data, size_t len)
+static int addr_aligned(struct bounce_buffer *state)
 {
 	const ulong align_mask = ARCH_DMA_MINALIGN - 1;
 
 	/* Check if start is aligned */
-	if ((ulong)data & align_mask) {
-		debug("Unaligned start address %p\n", data);
+	if ((ulong)state->user_buffer & align_mask) {
+		debug("Unaligned buffer address %p\n", state->user_buffer);
 		return 0;
 	}
 
-	data += len;
-
-	/* Check if end is aligned */
-	if ((ulong)data & align_mask) {
-		debug("Unaligned end address %p\n", data);
+	/* Check if length is aligned */
+	if (state->len != state->len_aligned) {
+		debug("Unaligned buffer length %d\n", state->len);
 		return 0;
 	}
 
@@ -49,44 +47,53 @@ static int addr_aligned(void *data, size_t len)
 	return 1;
 }
 
-int bounce_buffer_start(void **data, size_t len, void **backup, uint8_t flags)
+int bounce_buffer_start(struct bounce_buffer *state, void *data,
+			size_t len, unsigned int flags)
 {
-	void *tmp;
-	size_t alen;
-
-	if (addr_aligned(*data, len)) {
-		*backup = NULL;
-		return 0;
+	state->user_buffer = data;
+	state->bounce_buffer = data;
+	state->len = len;
+	state->len_aligned = roundup(len, ARCH_DMA_MINALIGN);
+	state->flags = flags;
+
+	if (!addr_aligned(state)) {
+		state->bounce_buffer = memalign(ARCH_DMA_MINALIGN,
+						state->len_aligned);
+		if (!state->bounce_buffer)
+			return -ENOMEM;
+
+		if (state->flags & GEN_BB_READ)
+			memcpy(state->bounce_buffer, state->user_buffer,
+				state->len);
 	}
 
-	alen = roundup(len, ARCH_DMA_MINALIGN);
-	tmp = memalign(ARCH_DMA_MINALIGN, alen);
-
-	if (!tmp)
-		return -ENOMEM;
-
-	if (flags & GEN_BB_READ)
-		memcpy(tmp, *data, len);
-
-	*backup = *data;
-	*data = tmp;
+	/*
+	 * Flush data to RAM so DMA reads can pick it up,
+	 * and any CPU writebacks don't race with DMA writes
+	 */
+	flush_dcache_range((unsigned long)state->bounce_buffer,
+				(unsigned long)(state->bounce_buffer) +
+					state->len_aligned);
 
 	return 0;
 }
 
-int bounce_buffer_stop(void **data, size_t len, void **backup, uint8_t flags)
+int bounce_buffer_stop(struct bounce_buffer *state)
 {
-	void *tmp = *data;
+	if (state->flags & GEN_BB_WRITE) {
+		/* Invalidate cache so that CPU can see any newly DMA'd data */
+		invalidate_dcache_range((unsigned long)state->bounce_buffer,
+					(unsigned long)(state->bounce_buffer) +
+						state->len_aligned);
+	}
 
-	/* The buffer was already aligned, since "backup" is NULL. */
-	if (!*backup)
+	if (state->bounce_buffer == state->user_buffer)
 		return 0;
 
-	if (flags & GEN_BB_WRITE)
-		memcpy(*backup, *data, len);
+	if (state->flags & GEN_BB_WRITE)
+		memcpy(state->user_buffer, state->bounce_buffer, state->len);
 
-	*data = *backup;
-	free(tmp);
+	free(state->bounce_buffer);
 
 	return 0;
 }
diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c
index b8809e3..5a52edd 100644
--- a/common/cmd_bmp.c
+++ b/common/cmd_bmp.c
@@ -31,6 +31,7 @@
 #include <command.h>
 #include <asm/byteorder.h>
 #include <malloc.h>
+#include <video.h>
 
 static int bmp_info (ulong addr);
 
@@ -238,9 +239,7 @@ int bmp_display(ulong addr, int x, int y)
 #if defined(CONFIG_LCD)
 	ret = lcd_display_bitmap((ulong)bmp, x, y);
 #elif defined(CONFIG_VIDEO)
-	extern int video_display_bitmap (ulong, int, int);
-
-	ret = video_display_bitmap ((unsigned long)bmp, x, y);
+	ret = video_display_bitmap((unsigned long)bmp, x, y);
 #else
 # error bmp_display() requires CONFIG_LCD or CONFIG_VIDEO
 #endif
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index d256ddf..4dbe952 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -949,8 +949,19 @@ static void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc,
 			 * node
 			 */
 			bootstage_mark(BOOTSTAGE_ID_FIT_NO_UNIT_NAME);
+#ifdef CONFIG_FIT_BEST_MATCH
+			if (fit_uname_config)
+				cfg_noffset =
+					fit_conf_get_node(fit_hdr,
+							  fit_uname_config);
+			else
+				cfg_noffset =
+					fit_conf_find_compat(fit_hdr,
+							     gd->fdt_blob);
+#else
 			cfg_noffset = fit_conf_get_node(fit_hdr,
 							fit_uname_config);
+#endif
 			if (cfg_noffset < 0) {
 				bootstage_error(BOOTSTAGE_ID_FIT_NO_UNIT_NAME);
 				return NULL;
diff --git a/common/cmd_led.c b/common/cmd_led.c
index d83b3ba..7f5ab43 100644
--- a/common/cmd_led.c
+++ b/common/cmd_led.c
@@ -140,7 +140,7 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 U_BOOT_CMD(
 	led, 3, 1, do_led,
-	"led\t- ["
+	"["
 #ifdef CONFIG_BOARD_SPECIFIC_LED
 #ifdef STATUS_LED_BIT
 	"0|"
@@ -167,6 +167,6 @@ U_BOOT_CMD(
 #ifdef STATUS_LED_BLUE
 	"blue|"
 #endif
-	"all] [on|off|toggle]\n",
-	"led [led_name] [on|off|toggle] sets or clears led(s)\n"
+	"all] [on|off|toggle]",
+	"[led_name] [on|off|toggle] sets or clears led(s)"
 );
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 62a1c224..7dacd51 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -144,7 +144,7 @@ static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 U_BOOT_CMD(
 	mmcinfo, 1, 0, do_mmcinfo,
 	"display MMC info",
-	"- dislay info of the current MMC device"
+	"- display info of the current MMC device"
 );
 
 static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -250,14 +250,13 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return 0;
 	}
 
-	if (strcmp(argv[1], "read") == 0)
+	state = MMC_INVALID;
+	if (argc == 5 && strcmp(argv[1], "read") == 0)
 		state = MMC_READ;
-	else if (strcmp(argv[1], "write") == 0)
+	else if (argc == 5 && strcmp(argv[1], "write") == 0)
 		state = MMC_WRITE;
-	else if (strcmp(argv[1], "erase") == 0)
+	else if (argc == 4 && strcmp(argv[1], "erase") == 0)
 		state = MMC_ERASE;
-	else
-		state = MMC_INVALID;
 
 	if (state != MMC_INVALID) {
 		struct mmc *mmc = find_mmc_device(curr_device);
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 4b16069..1568594 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -700,6 +700,25 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return ret == 0 ? 0 : 1;
 	}
 
+#ifdef CONFIG_CMD_NAND_TORTURE
+	if (strcmp(cmd, "torture") == 0) {
+		if (argc < 3)
+			goto usage;
+
+		if (!str2off(argv[2], &off)) {
+			puts("Offset is not a valid number\n");
+			return 1;
+		}
+
+		printf("\nNAND torture: device %d offset 0x%llx size 0x%x\n",
+			dev, off, nand->erasesize);
+		ret = nand_torture(nand, off);
+		printf(" %s\n", ret ? "Failed" : "Passed");
+
+		return ret == 0 ? 0 : 1;
+	}
+#endif
+
 	if (strcmp(cmd, "markbad") == 0) {
 		argc -= 2;
 		argv += 2;
@@ -810,6 +829,9 @@ static char nand_help_text[] =
 	"nand erase.chip [clean] - erase entire chip'\n"
 	"nand bad - show bad blocks\n"
 	"nand dump[.oob] off - dump page\n"
+#ifdef CONFIG_CMD_NAND_TORTURE
+	"nand torture off - torture block at offset\n"
+#endif
 	"nand scrub [-y] off size | scrub.part partition | scrub.chip\n"
 	"    really clean NAND erasing bad blocks (UNSAFE)\n"
 	"nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n"
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 8ad0b23..dacdc2d 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -192,7 +192,7 @@ static void usb_display_desc(struct usb_device *dev)
 
 }
 
-static void usb_display_conf_desc(struct usb_configuration_descriptor *config,
+static void usb_display_conf_desc(struct usb_config_descriptor *config,
 				  struct usb_device *dev)
 {
 	printf("   Configuration: %d\n", config->bConfigurationValue);
diff --git a/common/image.c b/common/image.c
index df642e6..e93b6e8 100644
--- a/common/image.c
+++ b/common/image.c
@@ -3049,6 +3049,133 @@ int fit_check_format(const void *fit)
 	return 1;
 }
 
+
+/**
+ * fit_conf_find_compat
+ * @fit: pointer to the FIT format image header
+ * @fdt: pointer to the device tree to compare against
+ *
+ * fit_conf_find_compat() attempts to find the configuration whose fdt is the
+ * most compatible with the passed in device tree.
+ *
+ * Example:
+ *
+ * / o image-tree
+ *   |-o images
+ *   | |-o fdt@1
+ *   | |-o fdt@2
+ *   |
+ *   |-o configurations
+ *     |-o config@1
+ *     | |-fdt = fdt@1
+ *     |
+ *     |-o config@2
+ *       |-fdt = fdt@2
+ *
+ * / o U-Boot fdt
+ *   |-compatible = "foo,bar", "bim,bam"
+ *
+ * / o kernel fdt1
+ *   |-compatible = "foo,bar",
+ *
+ * / o kernel fdt2
+ *   |-compatible = "bim,bam", "baz,biz"
+ *
+ * Configuration 1 would be picked because the first string in U-Boot's
+ * compatible list, "foo,bar", matches a compatible string in the root of fdt1.
+ * "bim,bam" in fdt2 matches the second string which isn't as good as fdt1.
+ *
+ * returns:
+ *     offset to the configuration to use if one was found
+ *     -1 otherwise
+ */
+int fit_conf_find_compat(const void *fit, const void *fdt)
+{
+	int ndepth = 0;
+	int noffset, confs_noffset, images_noffset;
+	const void *fdt_compat;
+	int fdt_compat_len;
+	int best_match_offset = 0;
+	int best_match_pos = 0;
+
+	confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH);
+	images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
+	if (confs_noffset < 0 || images_noffset < 0) {
+		debug("Can't find configurations or images nodes.\n");
+		return -1;
+	}
+
+	fdt_compat = fdt_getprop(fdt, 0, "compatible", &fdt_compat_len);
+	if (!fdt_compat) {
+		debug("Fdt for comparison has no \"compatible\" property.\n");
+		return -1;
+	}
+
+	/*
+	 * Loop over the configurations in the FIT image.
+	 */
+	for (noffset = fdt_next_node(fit, confs_noffset, &ndepth);
+			(noffset >= 0) && (ndepth > 0);
+			noffset = fdt_next_node(fit, noffset, &ndepth)) {
+		const void *kfdt;
+		const char *kfdt_name;
+		int kfdt_noffset;
+		const char *cur_fdt_compat;
+		int len;
+		size_t size;
+		int i;
+
+		if (ndepth > 1)
+			continue;
+
+		kfdt_name = fdt_getprop(fit, noffset, "fdt", &len);
+		if (!kfdt_name) {
+			debug("No fdt property found.\n");
+			continue;
+		}
+		kfdt_noffset = fdt_subnode_offset(fit, images_noffset,
+						  kfdt_name);
+		if (kfdt_noffset < 0) {
+			debug("No image node named \"%s\" found.\n",
+			      kfdt_name);
+			continue;
+		}
+		/*
+		 * Get a pointer to this configuration's fdt.
+		 */
+		if (fit_image_get_data(fit, kfdt_noffset, &kfdt, &size)) {
+			debug("Failed to get fdt \"%s\".\n", kfdt_name);
+			continue;
+		}
+
+		len = fdt_compat_len;
+		cur_fdt_compat = fdt_compat;
+		/*
+		 * Look for a match for each U-Boot compatibility string in
+		 * turn in this configuration's fdt.
+		 */
+		for (i = 0; len > 0 &&
+		     (!best_match_offset || best_match_pos > i); i++) {
+			int cur_len = strlen(cur_fdt_compat) + 1;
+
+			if (!fdt_node_check_compatible(kfdt, 0,
+						       cur_fdt_compat)) {
+				best_match_offset = noffset;
+				best_match_pos = i;
+				break;
+			}
+			len -= cur_len;
+			cur_fdt_compat += cur_len;
+		}
+	}
+	if (!best_match_offset) {
+		debug("No match found.\n");
+		return -1;
+	}
+
+	return best_match_offset;
+}
+
 /**
  * fit_conf_get_node - get node offset for configuration of a given unit name
  * @fit: pointer to the FIT format image header
diff --git a/common/lcd.c b/common/lcd.c
index 3017604..4778655 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -696,6 +696,138 @@ static void splash_align_axis(int *axis, unsigned long panel_size,
 }
 #endif
 
+
+#ifdef CONFIG_LCD_BMP_RLE8
+
+#define BMP_RLE8_ESCAPE		0
+#define BMP_RLE8_EOL		0
+#define BMP_RLE8_EOBMP		1
+#define BMP_RLE8_DELTA		2
+
+static void draw_unencoded_bitmap(ushort **fbp, uchar *bmap, ushort *cmap,
+				  int cnt)
+{
+	while (cnt > 0) {
+		*(*fbp)++ = cmap[*bmap++];
+		cnt--;
+	}
+}
+
+static void draw_encoded_bitmap(ushort **fbp, ushort c, int cnt)
+{
+	ushort *fb = *fbp;
+	int cnt_8copy = cnt >> 3;
+
+	cnt -= cnt_8copy << 3;
+	while (cnt_8copy > 0) {
+		*fb++ = c;
+		*fb++ = c;
+		*fb++ = c;
+		*fb++ = c;
+		*fb++ = c;
+		*fb++ = c;
+		*fb++ = c;
+		*fb++ = c;
+		cnt_8copy--;
+	}
+	while (cnt > 0) {
+		*fb++ = c;
+		cnt--;
+	}
+	(*fbp) = fb;
+}
+
+/*
+ * Do not call this function directly, must be called from
+ * lcd_display_bitmap.
+ */
+static void lcd_display_rle8_bitmap(bmp_image_t *bmp, ushort *cmap, uchar *fb,
+				    int x_off, int y_off)
+{
+	uchar *bmap;
+	ulong width, height;
+	ulong cnt, runlen;
+	int x, y;
+	int decode = 1;
+
+	width = le32_to_cpu(bmp->header.width);
+	height = le32_to_cpu(bmp->header.height);
+	bmap = (uchar *)bmp + le32_to_cpu(bmp->header.data_offset);
+
+	x = 0;
+	y = height - 1;
+
+	while (decode) {
+		if (bmap[0] == BMP_RLE8_ESCAPE) {
+			switch (bmap[1]) {
+			case BMP_RLE8_EOL:
+				/* end of line */
+				bmap += 2;
+				x = 0;
+				y--;
+				/* 16bpix, 2-byte per pixel, width should *2 */
+				fb -= (width * 2 + lcd_line_length);
+				break;
+			case BMP_RLE8_EOBMP:
+				/* end of bitmap */
+				decode = 0;
+				break;
+			case BMP_RLE8_DELTA:
+				/* delta run */
+				x += bmap[2];
+				y -= bmap[3];
+				/* 16bpix, 2-byte per pixel, x should *2 */
+				fb = (uchar *) (lcd_base + (y + y_off - 1)
+					* lcd_line_length + (x + x_off) * 2);
+				bmap += 4;
+				break;
+			default:
+				/* unencoded run */
+				runlen = bmap[1];
+				bmap += 2;
+				if (y < height) {
+					if (x < width) {
+						if (x + runlen > width)
+							cnt = width - x;
+						else
+							cnt = runlen;
+						draw_unencoded_bitmap(
+							(ushort **)&fb,
+							bmap, cmap, cnt);
+					}
+					x += runlen;
+				}
+				bmap += runlen;
+				if (runlen & 1)
+					bmap++;
+			}
+		} else {
+			/* encoded run */
+			if (y < height) {
+				runlen = bmap[0];
+				if (x < width) {
+					/* aggregate the same code */
+					while (bmap[0] == 0xff &&
+					       bmap[2] != BMP_RLE8_ESCAPE &&
+					       bmap[1] == bmap[3]) {
+						runlen += bmap[2];
+						bmap += 2;
+					}
+					if (x + runlen > width)
+						cnt = width - x;
+					else
+						cnt = runlen;
+					draw_encoded_bitmap((ushort **)&fb,
+						cmap[bmap[1]], cnt);
+				}
+				x += runlen;
+			}
+			bmap += 2;
+		}
+	}
+}
+#endif
+
 #if defined(CONFIG_MPC823) || defined(CONFIG_MCC200)
 #define FB_PUT_BYTE(fb, from) *(fb)++ = (255 - *(from)++)
 #else
@@ -729,7 +861,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 	uchar *fb;
 	bmp_image_t *bmp=(bmp_image_t *)bmp_image;
 	uchar *bmap;
-	ushort padded_line;
+	ushort padded_width;
 	unsigned long width, height, byte_width;
 	unsigned long pwidth = panel_info.vl_col;
 	unsigned colors, bpix, bmp_bpix;
@@ -816,7 +948,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 	}
 #endif
 
-	padded_line = (width&0x3) ? ((width&~0x3)+4) : (width);
+	padded_width = (width&0x3) ? ((width&~0x3)+4) : (width);
 
 #ifdef CONFIG_SPLASH_SCREEN_ALIGN
 	splash_align_axis(&x, pwidth, width);
@@ -835,6 +967,18 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 	switch (bmp_bpix) {
 	case 1: /* pass through */
 	case 8:
+#ifdef CONFIG_LCD_BMP_RLE8
+		if (le32_to_cpu(bmp->header.compression) == BMP_BI_RLE8) {
+			if (bpix != 16) {
+				/* TODO implement render code for bpix != 16 */
+				printf("Error: only support 16 bpix");
+				return 1;
+			}
+			lcd_display_rle8_bitmap(bmp, cmap_base, fb, x, y);
+			break;
+		}
+#endif
+
 		if (bpix != 16)
 			byte_width = width;
 		else
@@ -850,7 +994,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 					fb += sizeof(uint16_t) / sizeof(*fb);
 				}
 			}
-			bmap += (width - padded_line);
+			bmap += (padded_width - width);
 			fb   -= (byte_width + lcd_line_length);
 		}
 		break;
@@ -862,7 +1006,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 			for (j = 0; j < width; j++)
 				fb_put_word(&fb, &bmap);
 
-			bmap += (padded_line - width) * 2;
+			bmap += (padded_width - width) * 2;
 			fb   -= (width * 2 + lcd_line_length);
 		}
 		break;
@@ -940,5 +1084,31 @@ static void *lcd_logo(void)
 #endif /* CONFIG_LCD_LOGO && !CONFIG_LCD_INFO_BELOW_LOGO */
 }
 
+void lcd_position_cursor(unsigned col, unsigned row)
+{
+	console_col = min(col, CONSOLE_COLS - 1);
+	console_row = min(row, CONSOLE_ROWS - 1);
+}
+
+int lcd_get_pixel_width(void)
+{
+	return panel_info.vl_col;
+}
+
+int lcd_get_pixel_height(void)
+{
+	return panel_info.vl_row;
+}
+
+int lcd_get_screen_rows(void)
+{
+	return CONSOLE_ROWS;
+}
+
+int lcd_get_screen_columns(void)
+{
+	return CONSOLE_COLS;
+}
+
 /************************************************************************/
 /************************************************************************/
diff --git a/common/main.c b/common/main.c
index 5fdfff2..44fa20d 100644
--- a/common/main.c
+++ b/common/main.c
@@ -30,6 +30,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <fdtdec.h>
 #include <malloc.h>
 #include <version.h>
 #ifdef CONFIG_MODEM_SUPPORT
@@ -40,13 +41,19 @@
 #include <hush.h>
 #endif
 
+#ifdef CONFIG_OF_CONTROL
+#include <fdtdec.h>
+#endif
+
+#ifdef CONFIG_OF_LIBFDT
+#include <fdt_support.h>
+#endif /* CONFIG_OF_LIBFDT */
+
 #include <post.h>
 #include <linux/ctype.h>
 #include <menu.h>
 
-#if defined(CONFIG_SILENT_CONSOLE) || defined(CONFIG_POST) || defined(CONFIG_CMDLINE_EDITING)
 DECLARE_GLOBAL_DATA_PTR;
-#endif
 
 /*
  * Board-specific Platform code can reimplement show_boot_progress () if needed
@@ -274,6 +281,73 @@ int abortboot(int bootdelay)
 # endif	/* CONFIG_AUTOBOOT_KEYED */
 #endif	/* CONFIG_BOOTDELAY >= 0  */
 
+/*
+ * Runs the given boot command securely.  Specifically:
+ * - Doesn't run the command with the shell (run_command or parse_string_outer),
+ *   since that's a lot of code surface that an attacker might exploit.
+ *   Because of this, we don't do any argument parsing--the secure boot command
+ *   has to be a full-fledged u-boot command.
+ * - Doesn't check for keypresses before booting, since that could be a
+ *   security hole; also disables Ctrl-C.
+ * - Doesn't allow the command to return.
+ *
+ * Upon any failures, this function will drop into an infinite loop after
+ * printing the error message to console.
+ */
+
+#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) && \
+	defined(CONFIG_OF_CONTROL)
+static void secure_boot_cmd(char *cmd)
+{
+	cmd_tbl_t *cmdtp;
+	int rc;
+
+	if (!cmd) {
+		printf("## Error: Secure boot command not specified\n");
+		goto err;
+	}
+
+	/* Disable Ctrl-C just in case some command is used that checks it. */
+	disable_ctrlc(1);
+
+	/* Find the command directly. */
+	cmdtp = find_cmd(cmd);
+	if (!cmdtp) {
+		printf("## Error: \"%s\" not defined\n", cmd);
+		goto err;
+	}
+
+	/* Run the command, forcing no flags and faking argc and argv. */
+	rc = (cmdtp->cmd)(cmdtp, 0, 1, &cmd);
+
+	/* Shouldn't ever return from boot command. */
+	printf("## Error: \"%s\" returned (code %d)\n", cmd, rc);
+
+err:
+	/*
+	 * Not a whole lot to do here.  Rebooting won't help much, since we'll
+	 * just end up right back here.  Just loop.
+	 */
+	hang();
+}
+
+static void process_fdt_options(const void *blob)
+{
+	ulong addr;
+
+	/* Add an env variable to point to a kernel payload, if available */
+	addr = fdtdec_get_config_int(gd->fdt_blob, "kernel-offset", 0);
+	if (addr)
+		setenv_addr("kernaddr", (void *)(CONFIG_SYS_TEXT_BASE + addr));
+
+	/* Add an env variable to point to a root disk, if available */
+	addr = fdtdec_get_config_int(gd->fdt_blob, "rootdisk-offset", 0);
+	if (addr)
+		setenv_addr("rootaddr", (void *)(CONFIG_SYS_TEXT_BASE + addr));
+}
+#endif /* CONFIG_OF_CONTROL */
+
+
 /****************************************************************************/
 
 void main_loop (void)
@@ -284,7 +358,10 @@ void main_loop (void)
 	int rc = 1;
 	int flag;
 #endif
-
+#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) && \
+		defined(CONFIG_OF_CONTROL)
+	char *env;
+#endif
 #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
 	char *s;
 	int bootdelay;
@@ -380,6 +457,23 @@ void main_loop (void)
 	else
 #endif /* CONFIG_BOOTCOUNT_LIMIT */
 		s = getenv ("bootcmd");
+#ifdef CONFIG_OF_CONTROL
+	/* Allow the fdt to override the boot command */
+	env = fdtdec_get_config_string(gd->fdt_blob, "bootcmd");
+	if (env)
+		s = env;
+
+	process_fdt_options(gd->fdt_blob);
+
+	/*
+	 * If the bootsecure option was chosen, use secure_boot_cmd().
+	 * Always use 'env' in this case, since bootsecure requres that the
+	 * bootcmd was specified in the FDT too.
+	 */
+	if (fdtdec_get_config_int(gd->fdt_blob, "bootsecure", 0))
+		secure_boot_cmd(env);
+
+#endif /* CONFIG_OF_CONTROL */
 
 	debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
 
@@ -404,6 +498,10 @@ void main_loop (void)
 #endif /* CONFIG_MENUKEY */
 #endif /* CONFIG_BOOTDELAY */
 
+#if defined CONFIG_OF_CONTROL
+	set_working_fdt_addr((void *)gd->fdt_blob);
+#endif /* CONFIG_OF_CONTROL */
+
 	/*
 	 * Main Loop for Monitor Command Processing
 	 */
diff --git a/common/spl/spl.c b/common/spl/spl.c
index f068abd..ff9ba7b 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -74,6 +74,16 @@ __weak int spl_start_uboot(void)
 }
 #endif
 
+/*
+ * Weak default function for board specific cleanup/preparation before
+ * Linux boot. Some boards/platforms might not need it, so just provide
+ * an empty stub here.
+ */
+__weak void spl_board_prepare_for_linux(void)
+{
+	/* Nothing to do! */
+}
+
 void spl_parse_image_header(const struct image_header *header)
 {
 	u32 header_size = sizeof(struct image_header);
@@ -155,7 +165,13 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 			CONFIG_SYS_SPL_MALLOC_SIZE);
 #endif
 
+#ifndef CONFIG_PPC
+	/*
+	 * timer_init() does not exist on PPC systems. The timer is initialized
+	 * and enabled (decrementer) in interrupt_init() here.
+	 */
 	timer_init();
+#endif
 
 #ifdef CONFIG_SPL_BOARD_INIT
 	spl_board_init();
diff --git a/common/stdio.c b/common/stdio.c
index 605ff3f..9f48e5f 100644
--- a/common/stdio.c
+++ b/common/stdio.c
@@ -237,6 +237,8 @@ int stdio_init (void)
 #ifdef CONFIG_JTAG_CONSOLE
 	drv_jtag_console_init ();
 #endif
-
+#ifdef CONFIG_CBMEM_CONSOLE
+	cbmemc_init();
+#endif
 	return (0);
 }
diff --git a/common/usb.c b/common/usb.c
index 50b8175..ac9b4ca 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -492,9 +492,9 @@ int usb_get_configuration_no(struct usb_device *dev,
 {
 	int result;
 	unsigned int tmp;
-	struct usb_configuration_descriptor *config;
+	struct usb_config_descriptor *config;
 
-	config = (struct usb_configuration_descriptor *)&buffer[0];
+	config = (struct usb_config_descriptor *)&buffer[0];
 	result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, 9);
 	if (result < 9) {
 		if (result < 0)
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index 19f01db..4efbcfe 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -94,6 +94,15 @@ static const unsigned char usb_kbd_num_keypad[] = {
 };
 
 /*
+ * map arrow keys to ^F/^B ^N/^P, can't really use the proper
+ * ANSI sequence for arrow keys because the queuing code breaks
+ * when a single keypress expands to 3 queue elements
+ */
+static const unsigned char usb_kbd_arrow[] = {
+	0x6, 0x2, 0xe, 0x10
+};
+
+/*
  * NOTE: It's important for the NUM, CAPS, SCROLL-lock bits to be in this
  *       order. See usb_kbd_setled() function!
  */
@@ -112,7 +121,7 @@ struct usb_kbd_pdata {
 	uint32_t	usb_out_pointer;
 	uint8_t		usb_kbd_buffer[USB_KBD_BUFFER_LEN];
 
-	uint8_t		new[8];
+	uint8_t		*new;
 	uint8_t		old[8];
 
 	uint8_t		flags;
@@ -224,6 +233,10 @@ static int usb_kbd_translate(struct usb_kbd_pdata *data, unsigned char scancode,
 			keycode = usb_kbd_numkey[scancode - 0x1e];
 	}
 
+	/* Arrow keys */
+	if ((scancode >= 0x4f) && (scancode <= 0x52))
+		keycode = usb_kbd_arrow[scancode - 0x4f];
+
 	/* Numeric keypad */
 	if ((scancode >= 0x54) && (scancode <= 0x67))
 		keycode = usb_kbd_num_keypad[scancode - 0x54];
@@ -435,6 +448,9 @@ static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum)
 	/* Clear private data */
 	memset(data, 0, sizeof(struct usb_kbd_pdata));
 
+	/* allocate input buffer aligned and sized to USB DMA alignment */
+	data->new = memalign(USB_DMA_MINALIGN, roundup(8, USB_DMA_MINALIGN));
+
 	/* Insert private data into USB device structure */
 	dev->privptr = data;
 
diff --git a/disk/part.c b/disk/part.c
index 4646f68..7bdc90e 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -199,7 +199,7 @@ void dev_print (block_dev_desc_t *dev_desc)
 		break;
 	}
 	puts ("\n");
-	if ((dev_desc->lba * dev_desc->blksz)>0L) {
+	if (dev_desc->lba > 0L && dev_desc->blksz > 0L) {
 		ulong mb, mb_quot, mb_rem, gb, gb_quot, gb_rem;
 		lbaint_t lba;
 
diff --git a/doc/DocBook/Makefile b/doc/DocBook/Makefile
index da88b32..521e8bc 100644
--- a/doc/DocBook/Makefile
+++ b/doc/DocBook/Makefile
@@ -8,7 +8,7 @@
 
 include $(TOPDIR)/config.mk
 
-DOCBOOKS := linker_lists.xml stdio.xml
+DOCBOOKS := fs.xml linker_lists.xml stdio.xml
 
 ###
 # The build process is as follows (targets):
diff --git a/doc/README.mpc85xx b/doc/README.mpc85xx
index 5a4b591..f9b023f 100644
--- a/doc/README.mpc85xx
+++ b/doc/README.mpc85xx
@@ -26,7 +26,7 @@ Major Config Switches during various boot Modes
 ----------------------------------------------
 
 NOR boot
-		!defined(CONFIG_SYS_RAMBOOT)
+		!defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SPL)
 NOR boot Secure
 		!defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
 RAMBOOT(SD, SPI & NAND boot)
diff --git a/doc/README.nand b/doc/README.nand
index c130189..a1a511c 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -108,6 +108,9 @@ Configuration Options:
    CONFIG_CMD_NAND
       Enables NAND support and commmands.
 
+   CONFIG_CMD_NAND_TORTURE
+      Enables the torture command (see description of this command below).
+
    CONFIG_MTD_NAND_ECC_JFFS2
       Define this if you want the Error Correction Code information in
       the out-of-band data to be formatted to match the JFFS2 file system.
@@ -213,6 +216,24 @@ Miscellaneous and testing commands:
   DANGEROUS!!! Factory set bad blocks will be lost. Use only
   to remove artificial bad blocks created with the "markbad" command.
 
+  "torture offset"
+  Torture block to determine if it is still reliable.
+  Enabled by the CONFIG_CMD_NAND_TORTURE configuration option.
+  This command returns 0 if the block is still reliable, else 1.
+  If the block is detected as unreliable, it is up to the user to decide to
+  mark this block as bad.
+  The analyzed block is put through 3 erase / write cycles (or less if the block
+  is detected as unreliable earlier).
+  This command can be used in scripts, e.g. together with the markbad command to
+  automate retries and handling of possibly newly detected bad blocks if the
+  nand write command fails.
+  It can also be used manually by users having seen some NAND errors in logs to
+  search the root cause of these errors.
+  The underlying nand_torture() function is also useful for code willing to
+  automate actions following a nand->write() error. This would e.g. be required
+  in order to program or update safely firmware to NAND, especially for the UBI
+  part of such firmware.
+
 
 NAND locking command (for chips with active LOCKPRE pin)
 
diff --git a/doc/kwboot.1 b/doc/kwboot.1
index ed08398..25fe69a 100644
--- a/doc/kwboot.1
+++ b/doc/kwboot.1
@@ -79,6 +79,6 @@ Adjust the baud rate on \fITTY\fP. Default rate is 115200.
 
 Daniel Stodden <daniel.stodden@gmail.com>
 .br
-Luka Perkov <uboot@lukaperkov.net>
+Luka Perkov <luka@openwrt.org>
 .br
 David Purdy <david.c.purdy@gmail.com>
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index d50ac3b..2d97b4f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
 LIB 	:= $(obj)libgpio.o
 
 COBJS-$(CONFIG_AT91_GPIO)	+= at91_gpio.o
+COBJS-$(CONFIG_INTEL_ICH6_GPIO)	+= intel_ich6_gpio.o
 COBJS-$(CONFIG_KIRKWOOD_GPIO)	+= kw_gpio.o
 COBJS-$(CONFIG_MARVELL_GPIO)	+= mvgpio.o
 COBJS-$(CONFIG_MARVELL_MFP)	+= mvmfp.o
diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c
new file mode 100644
index 0000000..6fed01f
--- /dev/null
+++ b/drivers/gpio/intel_ich6_gpio.c
@@ -0,0 +1,290 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This is a GPIO driver for Intel ICH6 and later. The x86 GPIOs are accessed
+ * through the PCI bus. Each PCI device has 256 bytes of configuration space,
+ * consisting of a standard header and a device-specific set of registers. PCI
+ * bus 0, device 31, function 0 gives us access to the chipset GPIOs (among
+ * other things). Within the PCI configuration space, the GPIOBASE register
+ * tells us where in the device's I/O region we can find more registers to
+ * actually access the GPIOs.
+ *
+ * PCI bus/device/function 0:1f:0  => PCI config registers
+ *   PCI config register "GPIOBASE"
+ *     PCI I/O space + [GPIOBASE]  => start of GPIO registers
+ *       GPIO registers => gpio pin function, direction, value
+ *
+ *
+ * Danger Will Robinson! Bank 0 (GPIOs 0-31) seems to be fairly stable. Most
+ * ICH versions have more, but the decoding the matrix that describes them is
+ * absurdly complex and constantly changing. We'll provide Bank 1 and Bank 2,
+ * but they will ONLY work for certain unspecified chipsets because the offset
+ * from GPIOBASE changes randomly. Even then, many GPIOs are unimplemented or
+ * reserved or subject to arcane restrictions.
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+/* Where in config space is the register that points to the GPIO registers? */
+#define PCI_CFG_GPIOBASE 0x48
+
+#define NUM_BANKS 3
+
+/* Within the I/O space, where are the registers to control the GPIOs? */
+static struct {
+	u8 use_sel;
+	u8 io_sel;
+	u8 lvl;
+} gpio_bank[NUM_BANKS] = {
+	{ 0x00, 0x04, 0x0c },		/* Bank 0 */
+	{ 0x30, 0x34, 0x38 },		/* Bank 1 */
+	{ 0x40, 0x44, 0x48 }		/* Bank 2 */
+};
+
+static pci_dev_t dev;			/* handle for 0:1f:0 */
+static u32 gpiobase;			/* offset into I/O space */
+static int found_it_once;		/* valid GPIO device? */
+static u32 lock[NUM_BANKS];		/* "lock" for access to pins */
+
+static int bad_arg(int num, int *bank, int *bitnum)
+{
+	int i = num / 32;
+	int j = num % 32;
+
+	if (num < 0 || i > NUM_BANKS) {
+		debug("%s: bogus gpio num: %d\n", __func__, num);
+		return -1;
+	}
+	*bank = i;
+	*bitnum = j;
+	return 0;
+}
+
+static int mark_gpio(int bank, int bitnum)
+{
+	if (lock[bank] & (1UL << bitnum)) {
+		debug("%s: %d.%d already marked\n", __func__, bank, bitnum);
+		return -1;
+	}
+	lock[bank] |= (1 << bitnum);
+	return 0;
+}
+
+static void clear_gpio(int bank, int bitnum)
+{
+	lock[bank] &= ~(1 << bitnum);
+}
+
+static int notmine(int num, int *bank, int *bitnum)
+{
+	if (bad_arg(num, bank, bitnum))
+		return -1;
+	return !(lock[*bank] & (1UL << *bitnum));
+}
+
+static int gpio_init(void)
+{
+	u8 tmpbyte;
+	u16 tmpword;
+	u32 tmplong;
+
+	/* Have we already done this? */
+	if (found_it_once)
+		return 0;
+
+	/* Where should it be? */
+	dev = PCI_BDF(0, 0x1f, 0);
+
+	/* Is the device present? */
+	pci_read_config_word(dev, PCI_VENDOR_ID, &tmpword);
+	if (tmpword != PCI_VENDOR_ID_INTEL) {
+		debug("%s: wrong VendorID\n", __func__);
+		return -1;
+	}
+
+	pci_read_config_word(dev, PCI_DEVICE_ID, &tmpword);
+	debug("Found %04x:%04x\n", PCI_VENDOR_ID_INTEL, tmpword);
+	/*
+	 * We'd like to validate the Device ID too, but pretty much any
+	 * value is either a) correct with slight differences, or b)
+	 * correct but undocumented. We'll have to check a bunch of other
+	 * things instead...
+	 */
+
+	/* I/O should already be enabled (it's a RO bit). */
+	pci_read_config_word(dev, PCI_COMMAND, &tmpword);
+	if (!(tmpword & PCI_COMMAND_IO)) {
+		debug("%s: device IO not enabled\n", __func__);
+		return -1;
+	}
+
+	/* Header Type must be normal (bits 6-0 only; see spec.) */
+	pci_read_config_byte(dev, PCI_HEADER_TYPE, &tmpbyte);
+	if ((tmpbyte & 0x7f) != PCI_HEADER_TYPE_NORMAL) {
+		debug("%s: invalid Header type\n", __func__);
+		return -1;
+	}
+
+	/* Base Class must be a bridge device */
+	pci_read_config_byte(dev, PCI_CLASS_CODE, &tmpbyte);
+	if (tmpbyte != PCI_CLASS_CODE_BRIDGE) {
+		debug("%s: invalid class\n", __func__);
+		return -1;
+	}
+	/* Sub Class must be ISA */
+	pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &tmpbyte);
+	if (tmpbyte != PCI_CLASS_SUB_CODE_BRIDGE_ISA) {
+		debug("%s: invalid subclass\n", __func__);
+		return -1;
+	}
+
+	/* Programming Interface must be 0x00 (no others exist) */
+	pci_read_config_byte(dev, PCI_CLASS_PROG, &tmpbyte);
+	if (tmpbyte != 0x00) {
+		debug("%s: invalid interface type\n", __func__);
+		return -1;
+	}
+
+	/*
+	 * GPIOBASE moved to its current offset with ICH6, but prior to
+	 * that it was unused (or undocumented). Check that it looks
+	 * okay: not all ones or zeros, and mapped to I/O space (bit 0).
+	 */
+	pci_read_config_dword(dev, PCI_CFG_GPIOBASE, &tmplong);
+	if (tmplong == 0x00000000 || tmplong == 0xffffffff ||
+	    !(tmplong & 0x00000001)) {
+		debug("%s: unexpected GPIOBASE value\n", __func__);
+		return -1;
+	}
+
+	/*
+	 * Okay, I guess we're looking at the right device. The actual
+	 * GPIO registers are in the PCI device's I/O space, starting
+	 * at the offset that we just read. Bit 0 indicates that it's
+	 * an I/O address, not a memory address, so mask that off.
+	 */
+	gpiobase = tmplong & 0xfffffffe;
+
+	/* Finally. These are the droids we're looking for. */
+	found_it_once = 1;
+	return 0;
+}
+
+int gpio_request(unsigned num, const char *label /* UNUSED */)
+{
+	u32 tmplong;
+	int i = 0, j = 0;
+
+	/* Is the hardware ready? */
+	if (gpio_init())
+		return -1;
+
+	if (bad_arg(num, &i, &j))
+		return -1;
+
+	/*
+	 * Make sure that the GPIO pin we want isn't already in use for some
+	 * built-in hardware function. We have to check this for every
+	 * requested pin.
+	 */
+	tmplong = inl(gpiobase + gpio_bank[i].use_sel);
+	if (!(tmplong & (1UL << j))) {
+		debug("%s: gpio %d is reserved for internal use\n", __func__,
+		      num);
+		return -1;
+	}
+
+	return mark_gpio(i, j);
+}
+
+int gpio_free(unsigned num)
+{
+	int i = 0, j = 0;
+
+	if (notmine(num, &i, &j))
+		return -1;
+
+	clear_gpio(i, j);
+	return 0;
+}
+
+int gpio_direction_input(unsigned num)
+{
+	u32 tmplong;
+	int i = 0, j = 0;
+
+	if (notmine(num, &i, &j))
+		return -1;
+
+	tmplong = inl(gpiobase + gpio_bank[i].io_sel);
+	tmplong |= (1UL << j);
+	outl(gpiobase + gpio_bank[i].io_sel, tmplong);
+	return 0;
+}
+
+int gpio_direction_output(unsigned num, int value)
+{
+	u32 tmplong;
+	int i = 0, j = 0;
+
+	if (notmine(num, &i, &j))
+		return -1;
+
+	tmplong = inl(gpiobase + gpio_bank[i].io_sel);
+	tmplong &= ~(1UL << j);
+	outl(gpiobase + gpio_bank[i].io_sel, tmplong);
+	return 0;
+}
+
+int gpio_get_value(unsigned num)
+{
+	u32 tmplong;
+	int i = 0, j = 0;
+	int r;
+
+	if (notmine(num, &i, &j))
+		return -1;
+
+	tmplong = inl(gpiobase + gpio_bank[i].lvl);
+	r = (tmplong & (1UL << j)) ? 1 : 0;
+	return r;
+}
+
+int gpio_set_value(unsigned num, int value)
+{
+	u32 tmplong;
+	int i = 0, j = 0;
+
+	if (notmine(num, &i, &j))
+		return -1;
+
+	tmplong = inl(gpiobase + gpio_bank[i].lvl);
+	if (value)
+		tmplong |= (1UL << j);
+	else
+		tmplong &= ~(1UL << j);
+	outl(gpiobase + gpio_bank[i].lvl, tmplong);
+	return 0;
+}
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 9fac190..8cdc3b6 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -27,21 +27,13 @@ LIB	:= $(obj)libmisc.o
 
 COBJS-$(CONFIG_ALI152X) += ali512x.o
 COBJS-$(CONFIG_DS4510)  += ds4510.o
-COBJS-$(CONFIG_FSL_LAW) += fsl_law.o
+COBJS-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o
 COBJS-$(CONFIG_GPIO_LED) += gpio_led.o
 COBJS-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
 COBJS-$(CONFIG_NS87308) += ns87308.o
 COBJS-$(CONFIG_PDSP188x) += pdsp188x.o
 COBJS-$(CONFIG_STATUS_LED) += status_led.o
 COBJS-$(CONFIG_TWL4030_LED) += twl4030_led.o
-COBJS-$(CONFIG_PMIC) += pmic_core.o
-COBJS-$(CONFIG_DIALOG_PMIC) += pmic_dialog.o
-COBJS-$(CONFIG_PMIC_FSL) += pmic_fsl.o
-COBJS-$(CONFIG_PMIC_I2C) += pmic_i2c.o
-COBJS-$(CONFIG_PMIC_SPI) += pmic_spi.o
-COBJS-$(CONFIG_PMIC_MAX77686) += pmic_max77686.o
-COBJS-$(CONFIG_PMIC_MAX8998) += pmic_max8998.o
-COBJS-$(CONFIG_PMIC_MAX8997) += pmic_max8997.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/misc/cbmem_console.c b/drivers/misc/cbmem_console.c
new file mode 100644
index 0000000..80a84fd
--- /dev/null
+++ b/drivers/misc/cbmem_console.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2011 The ChromiumOS Authors.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
+ */
+
+#include <common.h>
+
+#ifndef CONFIG_SYS_COREBOOT
+#error This driver requires coreboot
+#endif
+
+#include <asm/arch/sysinfo.h>
+
+struct cbmem_console {
+	u32 buffer_size;
+	u32 buffer_cursor;
+	u8  buffer_body[0];
+}  __attribute__ ((__packed__));
+
+static struct cbmem_console *cbmem_console_p;
+
+void cbmemc_putc(char data)
+{
+	int cursor;
+
+	cursor = cbmem_console_p->buffer_cursor++;
+	if (cursor < cbmem_console_p->buffer_size)
+		cbmem_console_p->buffer_body[cursor] = data;
+}
+
+void cbmemc_puts(const char *str)
+{
+	char c;
+
+	while ((c = *str++) != 0)
+		cbmemc_putc(c);
+}
+
+int cbmemc_init(void)
+{
+	int rc;
+	struct stdio_dev cons_dev;
+	cbmem_console_p = lib_sysinfo.cbmem_cons;
+
+	memset(&cons_dev, 0, sizeof(cons_dev));
+
+	strcpy(cons_dev.name, "cbmem");
+	cons_dev.flags = DEV_FLAGS_OUTPUT; /* Output only */
+	cons_dev.putc  = cbmemc_putc;
+	cons_dev.puts  = cbmemc_puts;
+
+	rc = stdio_register(&cons_dev);
+
+	return (rc == 0) ? 1 : rc;
+}
diff --git a/drivers/misc/pmic_core.c b/drivers/misc/pmic_core.c
deleted file mode 100644
index 5d62a56..0000000
--- a/drivers/misc/pmic_core.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics
- * Lukasz Majewski <l.majewski@samsung.com>
- *
- * (C) Copyright 2010
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de
- *
- * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/types.h>
-#include <pmic.h>
-
-static struct pmic pmic;
-
-int check_reg(u32 reg)
-{
-	if (reg >= pmic.number_of_regs) {
-		printf("<reg num> = %d is invalid. Should be less than %d\n",
-		       reg, pmic.number_of_regs);
-		return -1;
-	}
-	return 0;
-}
-
-int pmic_set_output(struct pmic *p, u32 reg, int out, int on)
-{
-	u32 val;
-
-	if (pmic_reg_read(p, reg, &val))
-		return -1;
-
-	if (on)
-		val |= out;
-	else
-		val &= ~out;
-
-	if (pmic_reg_write(p, reg, val))
-		return -1;
-
-	return 0;
-}
-
-static void pmic_show_info(struct pmic *p)
-{
-	printf("PMIC: %s\n", p->name);
-}
-
-static void pmic_dump(struct pmic *p)
-{
-	int i, ret;
-	u32 val;
-
-	pmic_show_info(p);
-	for (i = 0; i < p->number_of_regs; i++) {
-		ret = pmic_reg_read(p, i, &val);
-		if (ret)
-			puts("PMIC: Registers dump failed\n");
-
-		if (!(i % 8))
-			printf("\n0x%02x: ", i);
-
-		printf("%08x ", val);
-	}
-	puts("\n");
-}
-
-struct pmic *get_pmic(void)
-{
-	return &pmic;
-}
-
-int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	u32 ret, reg, val;
-	char *cmd;
-
-	struct pmic *p = &pmic;
-
-	/* at least two arguments please */
-	if (argc < 2)
-		return cmd_usage(cmdtp);
-
-	cmd = argv[1];
-	if (strcmp(cmd, "dump") == 0) {
-		pmic_dump(p);
-		return 0;
-	}
-
-	if (strcmp(cmd, "read") == 0) {
-		if (argc < 3)
-			return cmd_usage(cmdtp);
-
-		reg = simple_strtoul(argv[2], NULL, 16);
-
-		ret = pmic_reg_read(p, reg, &val);
-
-		if (ret)
-			puts("PMIC: Register read failed\n");
-
-		printf("\n0x%02x: 0x%08x\n", reg, val);
-
-		return 0;
-	}
-
-	if (strcmp(cmd, "write") == 0) {
-		if (argc < 4)
-			return cmd_usage(cmdtp);
-
-		reg = simple_strtoul(argv[2], NULL, 16);
-		val = simple_strtoul(argv[3], NULL, 16);
-
-		pmic_reg_write(p, reg, val);
-
-		return 0;
-	}
-
-	/* No subcommand found */
-	return 1;
-}
-
-U_BOOT_CMD(
-	pmic,	CONFIG_SYS_MAXARGS, 1, do_pmic,
-	"PMIC",
-	"dump - dump PMIC registers\n"
-	"pmic read <reg> - read register\n"
-	"pmic write <reg> <value> - write register"
-);
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index a1dd730..65791aa 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -47,6 +47,7 @@ COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
 COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o
 COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
 COBJS-$(CONFIG_DWMMC) += dw_mmc.o
+COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
new file mode 100644
index 0000000..72a31b7
--- /dev/null
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,  MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <dwmmc.h>
+#include <asm/arch/dwmmc.h>
+#include <asm/arch/clk.h>
+
+static char *EXYNOS_NAME = "EXYNOS DWMMC";
+
+static void exynos_dwmci_clksel(struct dwmci_host *host)
+{
+	u32 val;
+	val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) |
+		DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) | DWMCI_SET_DIV_RATIO(0);
+
+	dwmci_writel(host, DWMCI_CLKSEL, val);
+}
+
+int exynos_dwmci_init(u32 regbase, int bus_width, int index)
+{
+	struct dwmci_host *host = NULL;
+	host = malloc(sizeof(struct dwmci_host));
+	if (!host) {
+		printf("dwmci_host malloc fail!\n");
+		return 1;
+	}
+
+	host->name = EXYNOS_NAME;
+	host->ioaddr = (void *)regbase;
+	host->buswidth = bus_width;
+	host->clksel = exynos_dwmci_clksel;
+	host->dev_index = index;
+
+	add_dwmci(host, 52000000, 400000);
+
+	return 0;
+}
+
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 5ffd8c5..72e8ce6 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -868,7 +868,7 @@ static void mmc_set_bus_width(struct mmc *mmc, uint width)
 
 static int mmc_startup(struct mmc *mmc)
 {
-	int err, width;
+	int err;
 	uint mult, freq;
 	u64 cmult, csize, capacity;
 	struct mmc_cmd cmd;
@@ -1087,21 +1087,44 @@ static int mmc_startup(struct mmc *mmc)
 		else
 			mmc->tran_speed = 25000000;
 	} else {
-		width = ((mmc->host_caps & MMC_MODE_MASK_WIDTH_BITS) >>
-			 MMC_MODE_WIDTH_BITS_SHIFT);
-		for (; width >= 0; width--) {
-			/* Set the card to use 4 bit*/
+		int idx;
+
+		/* An array of possible bus widths in order of preference */
+		static unsigned ext_csd_bits[] = {
+			EXT_CSD_BUS_WIDTH_8,
+			EXT_CSD_BUS_WIDTH_4,
+			EXT_CSD_BUS_WIDTH_1,
+		};
+
+		/* An array to map CSD bus widths to host cap bits */
+		static unsigned ext_to_hostcaps[] = {
+			[EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT,
+			[EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT,
+		};
+
+		/* An array to map chosen bus width to an integer */
+		static unsigned widths[] = {
+			8, 4, 1,
+		};
+
+		for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) {
+			unsigned int extw = ext_csd_bits[idx];
+
+			/*
+			 * Check to make sure the controller supports
+			 * this bus width, if it's more than 1
+			 */
+			if (extw != EXT_CSD_BUS_WIDTH_1 &&
+					!(mmc->host_caps & ext_to_hostcaps[extw]))
+				continue;
+
 			err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
-					EXT_CSD_BUS_WIDTH, width);
+					EXT_CSD_BUS_WIDTH, extw);
 
 			if (err)
 				continue;
 
-			if (!width) {
-				mmc_set_bus_width(mmc, 1);
-				break;
-			} else
-				mmc_set_bus_width(mmc, 4 * width);
+			mmc_set_bus_width(mmc, widths[idx]);
 
 			err = mmc_send_ext_csd(mmc, test_csd);
 			if (!err && ext_csd[EXT_CSD_PARTITIONING_SUPPORT] \
@@ -1115,7 +1138,7 @@ static int mmc_startup(struct mmc *mmc)
 				 && memcmp(&ext_csd[EXT_CSD_SEC_CNT], \
 					&test_csd[EXT_CSD_SEC_CNT], 4) == 0) {
 
-				mmc->card_caps |= width;
+				mmc->card_caps |= ext_to_hostcaps[extw];
 				break;
 			}
 		}
@@ -1135,13 +1158,15 @@ static int mmc_startup(struct mmc *mmc)
 	mmc->block_dev.type = 0;
 	mmc->block_dev.blksz = mmc->read_bl_len;
 	mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len);
-	sprintf(mmc->block_dev.vendor, "Man %06x Snr %08x", mmc->cid[0] >> 8,
-			(mmc->cid[2] << 8) | (mmc->cid[3] >> 24));
-	sprintf(mmc->block_dev.product, "%c%c%c%c%c", mmc->cid[0] & 0xff,
-			(mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff,
-			(mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff);
-	sprintf(mmc->block_dev.revision, "%d.%d", mmc->cid[2] >> 28,
-			(mmc->cid[2] >> 24) & 0xf);
+	sprintf(mmc->block_dev.vendor, "Man %06x Snr %04x%04x",
+		mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff),
+		(mmc->cid[3] >> 16) & 0xffff);
+	sprintf(mmc->block_dev.product, "%c%c%c%c%c%c", mmc->cid[0] & 0xff,
+		(mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff,
+		(mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff,
+		(mmc->cid[2] >> 24) & 0xff);
+	sprintf(mmc->block_dev.revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf,
+		(mmc->cid[2] >> 16) & 0xf);
 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)
 	init_part(&mmc->block_dev);
 #endif
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index 109acbf..024df59 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -96,11 +96,11 @@ static int mxsmmc_send_cmd_pio(struct mxsmmc_priv *priv, struct mmc_data *data)
 static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
 {
 	uint32_t data_count = data->blocksize * data->blocks;
-	uint32_t cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN);
 	int dmach;
 	struct mxs_dma_desc *desc = priv->desc;
-	void *addr, *backup;
-	uint8_t flags;
+	void *addr;
+	unsigned int flags;
+	struct bounce_buffer bbstate;
 
 	memset(desc, 0, sizeof(struct mxs_dma_desc));
 	desc->address = (dma_addr_t)desc;
@@ -115,19 +115,9 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
 		flags = GEN_BB_READ;
 	}
 
-	bounce_buffer_start(&addr, data_count, &backup, flags);
+	bounce_buffer_start(&bbstate, addr, data_count, flags);
 
-	priv->desc->cmd.address = (dma_addr_t)addr;
-
-	if (data->flags & MMC_DATA_WRITE) {
-		/* Flush data to DRAM so DMA can pick them up */
-		flush_dcache_range((uint32_t)addr,
-			(uint32_t)(addr) + cache_data_count);
-	}
-
-	/* Invalidate the area, so no writeback into the RAM races with DMA */
-	invalidate_dcache_range((uint32_t)priv->desc->cmd.address,
-			(uint32_t)(priv->desc->cmd.address + cache_data_count));
+	priv->desc->cmd.address = (dma_addr_t)bbstate.bounce_buffer;
 
 	priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
 				(data_count << MXS_DMA_DESC_BYTES_OFFSET);
@@ -135,17 +125,11 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
 	dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
 	mxs_dma_desc_append(dmach, priv->desc);
 	if (mxs_dma_go(dmach)) {
-		bounce_buffer_stop(&addr, data_count, &backup, flags);
+		bounce_buffer_stop(&bbstate);
 		return COMM_ERR;
 	}
 
-	/* The data arrived into DRAM, invalidate cache over them */
-	if (data->flags & MMC_DATA_READ) {
-		invalidate_dcache_range((uint32_t)addr,
-			(uint32_t)(addr) + cache_data_count);
-	}
-
-	bounce_buffer_stop(&addr, data_count, &backup, flags);
+	bounce_buffer_stop(&bbstate);
 
 	return 0;
 }
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 7845f87..b9cbe34 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -340,6 +340,9 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 		return;
 	}
 
+	if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
+		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
 	pwr |= SDHCI_POWER_ON;
 
 	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c
index 1fd5592..d749ab0 100644
--- a/drivers/mmc/tegra_mmc.c
+++ b/drivers/mmc/tegra_mmc.c
@@ -19,6 +19,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <bouncebuf.h>
 #include <common.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
@@ -66,14 +67,17 @@ static void tegra_get_setup(struct mmc_host *host, int dev_index)
 	host->reg = (struct tegra_mmc *)host->base;
 }
 
-static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
+static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data,
+				struct bounce_buffer *bbstate)
 {
 	unsigned char ctrl;
 
-	debug("data->dest: %08X, data->blocks: %u, data->blocksize: %u\n",
-	(u32)data->dest, data->blocks, data->blocksize);
 
-	writel((u32)data->dest, &host->reg->sysad);
+	debug("buf: %p (%p), data->blocks: %u, data->blocksize: %u\n",
+		bbstate->bounce_buffer, bbstate->user_buffer, data->blocks,
+		data->blocksize);
+
+	writel((u32)bbstate->bounce_buffer, &host->reg->sysad);
 	/*
 	 * DMASEL[4:3]
 	 * 00 = Selects SDMA
@@ -114,14 +118,6 @@ static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
 	if (data->flags & MMC_DATA_READ)
 		mode |= TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_READ;
 
-	if (data->flags & MMC_DATA_WRITE) {
-		if ((uintptr_t)data->src & (ARCH_DMA_MINALIGN - 1))
-			printf("Warning: unaligned write to %p may fail\n",
-			       data->src);
-		flush_dcache_range((ulong)data->src, (ulong)data->src +
-			data->blocks * data->blocksize);
-	}
-
 	writew(mode, &host->reg->trnmod);
 }
 
@@ -156,8 +152,8 @@ static int mmc_wait_inhibit(struct mmc_host *host,
 	return 0;
 }
 
-static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
+static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data, struct bounce_buffer *bbstate)
 {
 	struct mmc_host *host = (struct mmc_host *)mmc->priv;
 	int flags, i;
@@ -172,7 +168,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 		return result;
 
 	if (data)
-		mmc_prepare_data(host, data);
+		mmc_prepare_data(host, data, bbstate);
 
 	debug("cmd->arg: %08x\n", cmd->cmdarg);
 	writel(cmd->cmdarg, &host->reg->argument);
@@ -322,20 +318,42 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 			}
 		}
 		writel(mask, &host->reg->norintsts);
-		if (data->flags & MMC_DATA_READ) {
-			if ((uintptr_t)data->dest & (ARCH_DMA_MINALIGN - 1))
-				printf("Warning: unaligned read from %p "
-					"may fail\n", data->dest);
-			invalidate_dcache_range((ulong)data->dest,
-				(ulong)data->dest +
-					data->blocks * data->blocksize);
-		}
 	}
 
 	udelay(1000);
 	return 0;
 }
 
+static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data)
+{
+	void *buf;
+	unsigned int bbflags;
+	size_t len;
+	struct bounce_buffer bbstate;
+	int ret;
+
+	if (data) {
+		if (data->flags & MMC_DATA_READ) {
+			buf = data->dest;
+			bbflags = GEN_BB_WRITE;
+		} else {
+			buf = (void *)data->src;
+			bbflags = GEN_BB_READ;
+		}
+		len = data->blocks * data->blocksize;
+
+		bounce_buffer_start(&bbstate, buf, len, bbflags);
+	}
+
+	ret = mmc_send_cmd_bounced(mmc, cmd, data, &bbstate);
+
+	if (data)
+		bounce_buffer_stop(&bbstate);
+
+	return ret;
+}
+
 static void mmc_change_clock(struct mmc_host *host, uint clock)
 {
 	int div;
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index beb99ca..28e52bd 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -26,21 +26,33 @@ include $(TOPDIR)/config.mk
 LIB	:= $(obj)libnand.o
 
 ifdef CONFIG_CMD_NAND
+
 ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_NAND_SIMPLE
-COBJS-y += nand_spl_simple.o
-endif
-ifdef CONFIG_SPL_NAND_LOAD
-COBJS-y	+= nand_spl_load.o
+
+ifdef CONFIG_SPL_NAND_DRIVERS
+NORMAL_DRIVERS=y
 endif
-else
+
+COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
+COBJS-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
+COBJS-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
+COBJS-$(CONFIG_SPL_NAND_BASE) += nand_base.o
+
+else # not spl
+
+NORMAL_DRIVERS=y
+
 COBJS-y += nand.o
 COBJS-y += nand_bbt.o
 COBJS-y += nand_ids.o
 COBJS-y += nand_util.o
-endif
 COBJS-y += nand_ecc.o
 COBJS-y += nand_base.o
+
+endif # not spl
+
+ifdef NORMAL_DRIVERS
+
 COBJS-$(CONFIG_NAND_ECC_BCH) += nand_bch.o
 
 COBJS-$(CONFIG_NAND_ATMEL) += atmel_nand.o
@@ -65,7 +77,13 @@ COBJS-$(CONFIG_NAND_SPEAR) += spr_nand.o
 COBJS-$(CONFIG_TEGRA_NAND) += tegra_nand.o
 COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
 COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o
-endif
+
+else  # minimal SPL drivers
+
+COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
+
+endif # drivers
+endif # nand
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 9076ad4..834a8a6 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -748,7 +748,7 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
 
   	/* set up nand options */
 	nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
-			NAND_USE_FLASH_BBT;
+			NAND_USE_FLASH_BBT | NAND_NO_SUBPAGE_WRITE;
 
 	nand->controller = &elbc_ctrl->controller;
 	nand->priv = priv;
diff --git a/drivers/mtd/nand/fsl_elbc_spl.c b/drivers/mtd/nand/fsl_elbc_spl.c
new file mode 100644
index 0000000..50ff4fe
--- /dev/null
+++ b/drivers/mtd/nand/fsl_elbc_spl.c
@@ -0,0 +1,168 @@
+/*
+ * NAND boot for Freescale Enhanced Local Bus Controller, Flash Control Machine
+ *
+ * (C) Copyright 2006-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Copyright (c) 2008 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fsl_lbc.h>
+#include <nand.h>
+
+#define WINDOW_SIZE 8192
+
+static void nand_wait(void)
+{
+	fsl_lbc_t *regs = LBC_BASE_ADDR;
+
+	for (;;) {
+		uint32_t status = in_be32(&regs->ltesr);
+
+		if (status == 1)
+			return;
+
+		if (status & 1) {
+			puts("read failed (ltesr)\n");
+			for (;;);
+		}
+	}
+}
+
+static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
+{
+	fsl_lbc_t *regs = LBC_BASE_ADDR;
+	uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
+	const int large = CONFIG_SYS_NAND_OR_PRELIM & OR_FCM_PGS;
+	const int block_shift = large ? 17 : 14;
+	const int block_size = 1 << block_shift;
+	const int page_size = large ? 2048 : 512;
+	const int bad_marker = large ? page_size + 0 : page_size + 5;
+	int fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT) | 2;
+	int pos = 0;
+	char *dst = vdst;
+
+	if (offs & (block_size - 1)) {
+		puts("bad offset\n");
+		for (;;);
+	}
+
+	if (large) {
+		fmr |= FMR_ECCM;
+		out_be32(&regs->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
+		                     (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
+		out_be32(&regs->fir,
+		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
+		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
+		         (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+		         (FIR_OP_RBW << FIR_OP4_SHIFT));
+	} else {
+		out_be32(&regs->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT);
+		out_be32(&regs->fir,
+		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
+		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
+		         (FIR_OP_RBW << FIR_OP3_SHIFT));
+	}
+
+	out_be32(&regs->fbcr, 0);
+	clrsetbits_be32(&regs->bank[0].br, BR_DECC, BR_DECC_CHK_GEN);
+
+	while (pos < uboot_size) {
+		int i = 0;
+		out_be32(&regs->fbar, offs >> block_shift);
+
+		do {
+			int j;
+			unsigned int page_offs = (offs & (block_size - 1)) << 1;
+
+			out_be32(&regs->ltesr, ~0);
+			out_be32(&regs->lteatr, 0);
+			out_be32(&regs->fpar, page_offs);
+			out_be32(&regs->fmr, fmr);
+			out_be32(&regs->lsor, 0);
+			nand_wait();
+
+			page_offs %= WINDOW_SIZE;
+
+			/*
+			 * If either of the first two pages are marked bad,
+			 * continue to the next block.
+			 */
+			if (i++ < 2 && buf[page_offs + bad_marker] != 0xff) {
+				puts("skipping\n");
+				offs = (offs + block_size) & ~(block_size - 1);
+				pos &= ~(block_size - 1);
+				break;
+			}
+
+			for (j = 0; j < page_size; j++)
+				dst[pos + j] = buf[page_offs + j];
+
+			pos += page_size;
+			offs += page_size;
+		} while ((offs & (block_size - 1)) && (pos < uboot_size));
+	}
+
+	return 0;
+}
+
+/*
+ * The main entry for NAND booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from NAND into SDRAM and starts it from there.
+ */
+void nand_boot(void)
+{
+	__attribute__((noreturn)) void (*uboot)(void);
+	/*
+	 * Load U-Boot image from NAND into RAM
+	 */
+	nand_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+			CONFIG_SYS_NAND_U_BOOT_SIZE,
+			(void *)CONFIG_SYS_NAND_U_BOOT_DST);
+
+#ifdef CONFIG_NAND_ENV_DST
+	nand_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+			(void *)CONFIG_NAND_ENV_DST);
+
+#ifdef CONFIG_ENV_OFFSET_REDUND
+	nand_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
+			(void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
+#endif
+#endif
+
+#ifdef CONFIG_SPL_FLUSH_IMAGE
+	/*
+	 * Clean d-cache and invalidate i-cache, to
+	 * make sure that no stale data is executed.
+	 */
+	flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
+#endif
+
+	puts("transfering control\n");
+	/*
+	 * Jump to U-Boot image
+	 */
+	uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
+	(*uboot)();
+}
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index b3b7c70..0878bec 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -30,6 +30,7 @@
 #include <asm/errno.h>
 #include <asm/fsl_ifc.h>
 
+#define FSL_IFC_V1_1_0	0x01010000
 #define MAX_BANKS	4
 #define ERR_BYTE	0xFF /* Value returned for read bytes
 				when read failed */
@@ -738,11 +739,66 @@ static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip)
 {
 }
 
+static void fsl_ifc_sram_init(void)
+{
+	struct fsl_ifc *ifc = ifc_ctrl->regs;
+	uint32_t cs = 0, csor = 0, csor_8k = 0, csor_ext = 0;
+	long long end_tick;
+
+	cs = ifc_ctrl->cs_nand >> IFC_NAND_CSEL_SHIFT;
+
+	/* Save CSOR and CSOR_ext */
+	csor = in_be32(&ifc_ctrl->regs->csor_cs[cs].csor);
+	csor_ext = in_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext);
+
+	/* chage PageSize 8K and SpareSize 1K*/
+	csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000;
+	out_be32(&ifc_ctrl->regs->csor_cs[cs].csor, csor_8k);
+	out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, 0x0000400);
+
+	/* READID */
+	out_be32(&ifc->ifc_nand.nand_fir0,
+			(IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			(IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
+			(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
+	out_be32(&ifc->ifc_nand.nand_fcr0,
+			NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
+	out_be32(&ifc->ifc_nand.row3, 0x0);
+
+	out_be32(&ifc->ifc_nand.nand_fbcr, 0x0);
+
+	/* Program ROW0/COL0 */
+	out_be32(&ifc->ifc_nand.row0, 0x0);
+	out_be32(&ifc->ifc_nand.col0, 0x0);
+
+	/* set the chip select for NAND Transaction */
+	out_be32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
+
+	/* start read seq */
+	out_be32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
+
+	/* wait for NAND Machine complete flag or timeout */
+	end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
+
+	while (end_tick > get_ticks()) {
+		ifc_ctrl->status = in_be32(&ifc->ifc_nand.nand_evter_stat);
+
+		if (ifc_ctrl->status & IFC_NAND_EVTER_STAT_OPC)
+			break;
+	}
+
+	out_be32(&ifc->ifc_nand.nand_evter_stat, ifc_ctrl->status);
+
+	/* Restore CSOR and CSOR_ext */
+	out_be32(&ifc_ctrl->regs->csor_cs[cs].csor, csor);
+	out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, csor_ext);
+}
+
 int board_nand_init(struct nand_chip *nand)
 {
 	struct fsl_ifc_mtd *priv;
 	struct nand_ecclayout *layout;
-	uint32_t cspr = 0, csor = 0;
+	uint32_t cspr = 0, csor = 0, ver = 0;
 
 	if (!ifc_ctrl) {
 		fsl_ifc_ctrl_init();
@@ -797,7 +853,7 @@ int board_nand_init(struct nand_chip *nand)
 
 	/* set up nand options */
 	nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
-			NAND_USE_FLASH_BBT;
+			NAND_USE_FLASH_BBT | NAND_NO_SUBPAGE_WRITE;
 
 	if (cspr & CSPR_PORT_SIZE_16) {
 		nand->read_byte = fsl_ifc_read_byte16;
@@ -861,5 +917,9 @@ int board_nand_init(struct nand_chip *nand)
 		nand->ecc.mode = NAND_ECC_SOFT;
 	}
 
+	ver = in_be32(&ifc_ctrl->regs->ifc_rev);
+	if (ver == FSL_IFC_V1_1_0)
+		fsl_ifc_sram_init();
+
 	return 0;
 }
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index d3b71a5..a2d06be 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1245,7 +1245,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			if (unlikely(ops->mode == MTD_OOB_RAW))
 				ret = chip->ecc.read_page_raw(mtd, chip,
 							      bufpoi, page);
-			else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
+			else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
+			    !oob)
 				ret = chip->ecc.read_subpage(mtd, chip,
 							col, bytes, bufpoi);
 			else
@@ -1256,7 +1257,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 			/* Transfer not aligned data */
 			if (!aligned) {
-				if (!NAND_SUBPAGE_READ(chip) && !oob &&
+				if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
 				    !(mtd->ecc_stats.failed - stats.failed))
 					chip->pagebuf = realpage;
 				memcpy(buf, chip->buffers->databuf + col, bytes);
@@ -3150,6 +3151,10 @@ int nand_scan_tail(struct mtd_info *mtd)
 	/* Invalidate the pagebuffer reference */
 	chip->pagebuf = -1;
 
+	/* Large page NAND with SOFT_ECC should support subpage reads */
+	if ((chip->ecc.mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
+		chip->options |= NAND_SUBPAGE_READ;
+
 	/* Fill in remaining MTD driver data */
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index c4752a7..2ba0c5e 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -50,8 +50,8 @@
 #include <nand.h>
 #include <jffs2/jffs2.h>
 
-typedef struct erase_info erase_info_t;
-typedef struct mtd_info	  mtd_info_t;
+typedef struct erase_info	erase_info_t;
+typedef struct mtd_info		mtd_info_t;
 
 /* support only for native endian JFFS2 */
 #define cpu_to_je16(x) (x)
@@ -59,7 +59,7 @@ typedef struct mtd_info	  mtd_info_t;
 
 /**
  * nand_erase_opts: - erase NAND flash with support for various options
- *		      (jffs2 formating)
+ *		      (jffs2 formatting)
  *
  * @param meminfo	NAND device to erase
  * @param opts		options,  @see struct nand_erase_options
@@ -80,8 +80,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 	struct mtd_oob_ops oob_opts;
 	struct nand_chip *chip = meminfo->priv;
 
-	if ((opts->offset & (meminfo->writesize - 1)) != 0) {
-		printf("Attempt to erase non page aligned data\n");
+	if ((opts->offset & (meminfo->erasesize - 1)) != 0) {
+		printf("Attempt to erase non block-aligned data\n");
 		return -1;
 	}
 
@@ -94,8 +94,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 	erase_length = lldiv(opts->length + meminfo->erasesize - 1,
 			     meminfo->erasesize);
 
-	cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
-	cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
+	cleanmarker.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
+	cleanmarker.nodetype = cpu_to_je16(JFFS2_NODETYPE_CLEANMARKER);
 	cleanmarker.totlen = cpu_to_je32(8);
 
 	/* scrub option allows to erase badblock. To prevent internal
@@ -118,7 +118,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 	     erased_length < erase_length;
 	     erase.addr += meminfo->erasesize) {
 
-		WATCHDOG_RESET ();
+		WATCHDOG_RESET();
 
 		if (!opts->scrub && bbtest) {
 			int ret = meminfo->block_isbad(meminfo, erase.addr);
@@ -259,7 +259,7 @@ int nand_lock(struct mtd_info *mtd, int tight)
  *			   flash
  *
  * @param mtd		nand mtd instance
- * @param offset	page address to query (muss be page aligned!)
+ * @param offset	page address to query (must be page-aligned!)
  *
  * @return		-1 in case of error
  *			>0 lock status:
@@ -281,7 +281,7 @@ int nand_get_lock_status(struct mtd_info *mtd, loff_t offset)
 
 
 	if ((offset & (mtd->writesize - 1)) != 0) {
-		printf ("nand_get_lock_status: "
+		printf("nand_get_lock_status: "
 			"Start address must be beginning of "
 			"nand page!\n");
 		ret = -1;
@@ -332,20 +332,20 @@ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length,
 	/* check the WP bit */
 	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 	if (!(chip->read_byte(mtd) & NAND_STATUS_WP)) {
-		printf ("nand_unlock: Device is write protected!\n");
+		printf("nand_unlock: Device is write protected!\n");
 		ret = -1;
 		goto out;
 	}
 
 	if ((start & (mtd->erasesize - 1)) != 0) {
-		printf ("nand_unlock: Start address must be beginning of "
+		printf("nand_unlock: Start address must be beginning of "
 			"nand block!\n");
 		ret = -1;
 		goto out;
 	}
 
 	if (length == 0 || (length & (mtd->erasesize - 1)) != 0) {
-		printf ("nand_unlock: Length must be a multiple of nand block "
+		printf("nand_unlock: Length must be a multiple of nand block "
 			"size %08x!\n", mtd->erasesize);
 		ret = -1;
 		goto out;
@@ -485,7 +485,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		pages = nand->erasesize / nand->writesize;
 		blocksize = (pages * nand->oobsize) + nand->erasesize;
 		if (*length % (nand->writesize + nand->oobsize)) {
-			printf ("Attempt to write incomplete page"
+			printf("Attempt to write incomplete page"
 				" in yaffs mode\n");
 			return -EINVAL;
 		}
@@ -507,25 +507,25 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 	 * partition boundary).  So don't try to handle that.
 	 */
 	if ((offset & (nand->writesize - 1)) != 0) {
-		printf ("Attempt to write non page aligned data\n");
+		printf("Attempt to write non page-aligned data\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	need_skip = check_skip_len(nand, offset, *length);
 	if (need_skip < 0) {
-		printf ("Attempt to write outside the flash area\n");
+		printf("Attempt to write outside the flash area\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	if (!need_skip && !(flags & WITH_DROP_FFS)) {
-		rval = nand_write (nand, offset, length, buffer);
+		rval = nand_write(nand, offset, length, buffer);
 		if (rval == 0)
 			return 0;
 
 		*length = 0;
-		printf ("NAND write to offset %llx failed %d\n",
+		printf("NAND write to offset %llx failed %d\n",
 			offset, rval);
 		return rval;
 	}
@@ -534,10 +534,10 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		size_t block_offset = offset & (nand->erasesize - 1);
 		size_t write_size, truncated_write_size;
 
-		WATCHDOG_RESET ();
+		WATCHDOG_RESET();
 
-		if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
-			printf ("Skip bad block 0x%08llx\n",
+		if (nand_block_isbad(nand, offset & ~(nand->erasesize - 1))) {
+			printf("Skip bad block 0x%08llx\n",
 				offset & ~(nand->erasesize - 1));
 			offset += nand->erasesize - block_offset;
 			continue;
@@ -592,7 +592,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		}
 
 		if (rval != 0) {
-			printf ("NAND write to offset %llx failed %d\n",
+			printf("NAND write to offset %llx failed %d\n",
 				offset, rval);
 			*length -= left_to_write;
 			return rval;
@@ -608,13 +608,13 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
  * nand_read_skip_bad:
  *
  * Read image from NAND flash.
- * Blocks that are marked bad are skipped and the next block is readen
+ * Blocks that are marked bad are skipped and the next block is read
  * instead as long as the image is short enough to fit even after skipping the
  * bad blocks.
  *
  * @param nand NAND device
  * @param offset offset in flash
- * @param length buffer length, on return holds remaining bytes to read
+ * @param length buffer length, on return holds number of read bytes
  * @param buffer buffer to write to
  * @return 0 in case of success
  */
@@ -627,25 +627,25 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 	int need_skip;
 
 	if ((offset & (nand->writesize - 1)) != 0) {
-		printf ("Attempt to read non page aligned data\n");
+		printf("Attempt to read non page-aligned data\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	need_skip = check_skip_len(nand, offset, *length);
 	if (need_skip < 0) {
-		printf ("Attempt to read outside the flash area\n");
+		printf("Attempt to read outside the flash area\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	if (!need_skip) {
-		rval = nand_read (nand, offset, length, buffer);
+		rval = nand_read(nand, offset, length, buffer);
 		if (!rval || rval == -EUCLEAN)
 			return 0;
 
 		*length = 0;
-		printf ("NAND read from offset %llx failed %d\n",
+		printf("NAND read from offset %llx failed %d\n",
 			offset, rval);
 		return rval;
 	}
@@ -654,10 +654,10 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		size_t block_offset = offset & (nand->erasesize - 1);
 		size_t read_length;
 
-		WATCHDOG_RESET ();
+		WATCHDOG_RESET();
 
-		if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
-			printf ("Skipping bad block 0x%08llx\n",
+		if (nand_block_isbad(nand, offset & ~(nand->erasesize - 1))) {
+			printf("Skipping bad block 0x%08llx\n",
 				offset & ~(nand->erasesize - 1));
 			offset += nand->erasesize - block_offset;
 			continue;
@@ -668,9 +668,9 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		else
 			read_length = nand->erasesize - block_offset;
 
-		rval = nand_read (nand, offset, &read_length, p_buffer);
+		rval = nand_read(nand, offset, &read_length, p_buffer);
 		if (rval && rval != -EUCLEAN) {
-			printf ("NAND read from offset %llx failed %d\n",
+			printf("NAND read from offset %llx failed %d\n",
 				offset, rval);
 			*length -= left_to_read;
 			return rval;
@@ -683,3 +683,125 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 
 	return 0;
 }
+
+#ifdef CONFIG_CMD_NAND_TORTURE
+
+/**
+ * check_pattern:
+ *
+ * Check if buffer contains only a certain byte pattern.
+ *
+ * @param buf buffer to check
+ * @param patt the pattern to check
+ * @param size buffer size in bytes
+ * @return 1 if there are only patt bytes in buf
+ *         0 if something else was found
+ */
+static int check_pattern(const u_char *buf, u_char patt, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (buf[i] != patt)
+			return 0;
+	return 1;
+}
+
+/**
+ * nand_torture:
+ *
+ * Torture a block of NAND flash.
+ * This is useful to determine if a block that caused a write error is still
+ * good or should be marked as bad.
+ *
+ * @param nand NAND device
+ * @param offset offset in flash
+ * @return 0 if the block is still good
+ */
+int nand_torture(nand_info_t *nand, loff_t offset)
+{
+	u_char patterns[] = {0xa5, 0x5a, 0x00};
+	struct erase_info instr = {
+		.mtd = nand,
+		.addr = offset,
+		.len = nand->erasesize,
+	};
+	size_t retlen;
+	int err, ret = -1, i, patt_count;
+	u_char *buf;
+
+	if ((offset & (nand->erasesize - 1)) != 0) {
+		puts("Attempt to torture a block at a non block-aligned offset\n");
+		return -EINVAL;
+	}
+
+	if (offset + nand->erasesize > nand->size) {
+		puts("Attempt to torture a block outside the flash area\n");
+		return -EINVAL;
+	}
+
+	patt_count = ARRAY_SIZE(patterns);
+
+	buf = malloc(nand->erasesize);
+	if (buf == NULL) {
+		puts("Out of memory for erase block buffer\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < patt_count; i++) {
+		err = nand->erase(nand, &instr);
+		if (err) {
+			printf("%s: erase() failed for block at 0x%llx: %d\n",
+				nand->name, instr.addr, err);
+			goto out;
+		}
+
+		/* Make sure the block contains only 0xff bytes */
+		err = nand->read(nand, offset, nand->erasesize, &retlen, buf);
+		if ((err && err != -EUCLEAN) || retlen != nand->erasesize) {
+			printf("%s: read() failed for block at 0x%llx: %d\n",
+				nand->name, instr.addr, err);
+			goto out;
+		}
+
+		err = check_pattern(buf, 0xff, nand->erasesize);
+		if (!err) {
+			printf("Erased block at 0x%llx, but a non-0xff byte was found\n",
+				offset);
+			ret = -EIO;
+			goto out;
+		}
+
+		/* Write a pattern and check it */
+		memset(buf, patterns[i], nand->erasesize);
+		err = nand->write(nand, offset, nand->erasesize, &retlen, buf);
+		if (err || retlen != nand->erasesize) {
+			printf("%s: write() failed for block at 0x%llx: %d\n",
+				nand->name, instr.addr, err);
+			goto out;
+		}
+
+		err = nand->read(nand, offset, nand->erasesize, &retlen, buf);
+		if ((err && err != -EUCLEAN) || retlen != nand->erasesize) {
+			printf("%s: read() failed for block at 0x%llx: %d\n",
+				nand->name, instr.addr, err);
+			goto out;
+		}
+
+		err = check_pattern(buf, patterns[i], nand->erasesize);
+		if (!err) {
+			printf("Pattern 0x%.2x checking failed for block at "
+					"0x%llx\n", patterns[i], offset);
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	ret = 0;
+
+out:
+	free(buf);
+	return ret;
+}
+
+#endif
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 7a1fcdd..7fbb50a 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -44,6 +44,7 @@ COBJS-$(CONFIG_PPC_P2041) += p5020.o
 COBJS-$(CONFIG_PPC_P3041) += p5020.o
 COBJS-$(CONFIG_PPC_P4080) += p4080.o
 COBJS-$(CONFIG_PPC_P5020) += p5020.o
+COBJS-$(CONFIG_PPC_P5040) += p5040.o
 COBJS-$(CONFIG_PPC_T4240) += t4240.o
 COBJS-$(CONFIG_PPC_B4860) += b4860.o
 endif
diff --git a/drivers/net/fm/p5040.c b/drivers/net/fm/p5040.c
new file mode 100644
index 0000000..bc6b4ba
--- /dev/null
+++ b/drivers/net/fm/p5040.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+	[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+	[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+	[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+	[FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+	[FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5,
+	[FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1,
+	[FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1,
+	[FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2,
+	[FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3,
+	[FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4,
+	[FM2_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC2_5,
+	[FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 devdisr2 = in_be32(&gur->devdisr2);
+
+	return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	/* don't allow disabling of DTSEC1 as its needed for MDIO */
+	if (port == FM1_DTSEC1)
+		return;
+
+	setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
+
+	if (is_device_disabled(port))
+		return PHY_INTERFACE_MODE_NONE;
+
+	if ((port == FM1_10GEC1) && (is_serdes_configured(XAUI_FM1)))
+		return PHY_INTERFACE_MODE_XGMII;
+
+	if ((port == FM2_10GEC1) && (is_serdes_configured(XAUI_FM2)))
+		return PHY_INTERFACE_MODE_XGMII;
+
+	/* handle RGMII first */
+	if ((port == FM1_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) ==
+		FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII))
+		return PHY_INTERFACE_MODE_RGMII;
+
+	if ((port == FM1_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) ==
+		FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII))
+		return PHY_INTERFACE_MODE_MII;
+
+	if ((port == FM2_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
+		FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_RGMII))
+		return PHY_INTERFACE_MODE_RGMII;
+
+	if ((port == FM2_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
+		FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII))
+		return PHY_INTERFACE_MODE_MII;
+
+	switch (port) {
+	case FM1_DTSEC1:
+	case FM1_DTSEC2:
+	case FM1_DTSEC3:
+	case FM1_DTSEC4:
+	case FM1_DTSEC5:
+		if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+			return PHY_INTERFACE_MODE_SGMII;
+		break;
+	case FM2_DTSEC1:
+	case FM2_DTSEC2:
+	case FM2_DTSEC3:
+	case FM2_DTSEC4:
+	case FM2_DTSEC5:
+		if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1))
+			return PHY_INTERFACE_MODE_SGMII;
+		break;
+	default:
+		return PHY_INTERFACE_MODE_NONE;
+	}
+
+	return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 48ae163..77ac1f7 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -470,6 +470,28 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
 		}
 #endif
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
+		if (enabled == 0) {
+			serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+			temp32 = in_be32(&srds_regs->srdspccr0);
+
+			if ((temp32 >> 28) == 3) {
+				int i;
+
+				out_be32(&srds_regs->srdspccr0, 2 << 28);
+				setbits_be32(&pci->pdb_stat, 0x08000000);
+				in_be32(&pci->pdb_stat);
+				udelay(100);
+				clrbits_be32(&pci->pdb_stat, 0x08000000);
+				asm("sync;isync");
+				for (i=0; i < 100 && ltssm < PCI_LTSSM_L0; i++) {
+					pci_hose_read_config_word(hose, dev, PCI_LTSSM, &ltssm);
+					udelay(1000);
+				}
+				enabled = ltssm >= PCI_LTSSM_L0;
+			}
+		}
+#endif
 		if (!enabled) {
 			/* Let the user know there's no PCIe link */
 			printf("no link, regs @ 0x%lx\n", pci_info->regs);
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 6bf388c..8c71901 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -23,7 +23,7 @@
 
 include $(TOPDIR)/config.mk
 
-LIB 	:= $(obj)libpower.o
+LIB	:= $(obj)libpower.o
 
 COBJS-$(CONFIG_FTPMU010_POWER)	+= ftpmu010.o
 COBJS-$(CONFIG_TPS6586X_POWER)	+= tps6586x.o
@@ -31,9 +31,15 @@ COBJS-$(CONFIG_TWL4030_POWER)	+= twl4030.o
 COBJS-$(CONFIG_TWL6030_POWER)	+= twl6030.o
 COBJS-$(CONFIG_TWL6035_POWER)	+= twl6035.o
 
+COBJS-$(CONFIG_POWER) += power_core.o
+COBJS-$(CONFIG_DIALOG_POWER) += power_dialog.o
+COBJS-$(CONFIG_POWER_FSL) += power_fsl.o
+COBJS-$(CONFIG_POWER_I2C) += power_i2c.o
+COBJS-$(CONFIG_POWER_SPI) += power_spi.o
+
 COBJS	:= $(COBJS-y)
-SRCS 	:= $(COBJS:.o=.c)
-OBJS 	:= $(addprefix $(obj),$(COBJS))
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
 
 all:	$(LIB)
 
diff --git a/drivers/power/battery/Makefile b/drivers/power/battery/Makefile
new file mode 100644
index 0000000..b176701
--- /dev/null
+++ b/drivers/power/battery/Makefile
@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2012 Samsung Electronics
+# Lukasz Majewski <l.majewski@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)libbattery.o
+
+COBJS-$(CONFIG_POWER_BATTERY_TRATS) += bat_trats.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+########################################################################
diff --git a/drivers/power/battery/bat_trats.c b/drivers/power/battery/bat_trats.c
new file mode 100644
index 0000000..ca0d214
--- /dev/null
+++ b/drivers/power/battery/bat_trats.c
@@ -0,0 +1,100 @@
+/*
+ *  Copyright (C) 2012 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <power/pmic.h>
+#include <power/battery.h>
+#include <power/max8997_pmic.h>
+#include <errno.h>
+
+static struct battery battery_trats;
+
+static int power_battery_charge(struct pmic *bat)
+{
+	struct power_battery *p_bat = bat->pbat;
+	struct battery *battery = p_bat->bat;
+	int k;
+
+	if (bat->chrg->chrg_state(p_bat->chrg, CHARGER_ENABLE, 450))
+		return -1;
+
+	for (k = 0; bat->chrg->chrg_bat_present(p_bat->chrg) &&
+		     bat->chrg->chrg_type(p_bat->muic) &&
+		     battery->state_of_chrg < 100; k++) {
+		udelay(10000000);
+		puts(".");
+		bat->fg->fg_battery_update(p_bat->fg, bat);
+
+		if (k == 100) {
+			debug(" %d [V]", battery->voltage_uV);
+			puts("\n");
+			k = 0;
+		}
+
+	}
+
+	bat->chrg->chrg_state(p_bat->chrg, CHARGER_DISABLE, 0);
+
+	return 0;
+}
+
+static int power_battery_init_trats(struct pmic *bat_,
+				    struct pmic *fg_,
+				    struct pmic *chrg_,
+				    struct pmic *muic_)
+{
+	bat_->pbat->fg = fg_;
+	bat_->pbat->chrg = chrg_;
+	bat_->pbat->muic = muic_;
+
+	bat_->fg = fg_->fg;
+	bat_->chrg = chrg_->chrg;
+	bat_->chrg->chrg_type = muic_->chrg->chrg_type;
+	return 0;
+}
+
+static struct power_battery power_bat_trats = {
+	.bat = &battery_trats,
+	.battery_init = power_battery_init_trats,
+	.battery_charge = power_battery_charge,
+};
+
+int power_bat_init(unsigned char bus)
+{
+	static const char name[] = "BAT_TRATS";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	debug("Board BAT init\n");
+
+	p->interface = PMIC_NONE;
+	p->name = name;
+	p->bus = bus;
+
+	p->pbat = &power_bat_trats;
+	return 0;
+}
diff --git a/drivers/power/fuel_gauge/Makefile b/drivers/power/fuel_gauge/Makefile
new file mode 100644
index 0000000..da15414
--- /dev/null
+++ b/drivers/power/fuel_gauge/Makefile
@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2012 Samsung Electronics
+# Lukasz Majewski <l.majewski@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)libfuel_gauge.o
+
+COBJS-$(CONFIG_POWER_FG_MAX17042) += fg_max17042.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+########################################################################
diff --git a/drivers/power/fuel_gauge/fg_max17042.c b/drivers/power/fuel_gauge/fg_max17042.c
new file mode 100644
index 0000000..9b7c184
--- /dev/null
+++ b/drivers/power/fuel_gauge/fg_max17042.c
@@ -0,0 +1,250 @@
+/*
+ *  Copyright (C) 2012 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <power/pmic.h>
+#include <power/max17042_fg.h>
+#include <i2c.h>
+#include <power/max8997_pmic.h>
+#include <power/power_chrg.h>
+#include <power/battery.h>
+#include <power/fg_battery_cell_params.h>
+#include <errno.h>
+
+static int fg_write_regs(struct pmic *p, u8 addr, u16 *data, int num)
+{
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < num; i++, addr++)
+		ret |= pmic_reg_write(p, addr, *(data + i));
+
+	return ret;
+}
+
+static int fg_read_regs(struct pmic *p, u8 addr, u16 *data, int num)
+{
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < num; i++, addr++)
+		ret |= pmic_reg_read(p, addr, (u32 *) (data + i));
+
+	return ret;
+}
+
+static int fg_write_and_verify(struct pmic *p, u8 addr, u16 data)
+{
+	unsigned int val = data;
+	int ret = 0;
+
+	ret |= pmic_reg_write(p, addr, val);
+	ret |= pmic_reg_read(p, addr, &val);
+
+	if (ret)
+		return ret;
+
+	if (((u16) val) == data)
+		return 0;
+
+	return -1;
+}
+
+static void por_fuelgauge_init(struct pmic *p)
+{
+	u16 r_data0[16], r_data1[16], r_data2[16];
+	u32 rewrite_count = 5, i = 0;
+	unsigned int val;
+	int ret = 0;
+
+	/* Delay 500 ms */
+	mdelay(500);
+	/* Initilize Configuration */
+	pmic_reg_write(p, MAX17042_CONFIG, 0x2310);
+
+rewrite_model:
+	/* Unlock Model Access */
+	pmic_reg_write(p, MAX17042_MLOCKReg1, MODEL_UNLOCK1);
+	pmic_reg_write(p, MAX17042_MLOCKReg2, MODEL_UNLOCK2);
+
+	/* Write/Read/Verify the Custom Model */
+	ret |= fg_write_regs(p, MAX17042_MODEL1, cell_character0,
+			     ARRAY_SIZE(cell_character0));
+	ret |= fg_write_regs(p, MAX17042_MODEL2, cell_character1,
+			     ARRAY_SIZE(cell_character1));
+	ret |= fg_write_regs(p, MAX17042_MODEL3, cell_character2,
+			     ARRAY_SIZE(cell_character2));
+
+	if (ret) {
+		printf("%s: Cell parameters write failed!\n", __func__);
+		return;
+	}
+
+	ret |= fg_read_regs(p, MAX17042_MODEL1, r_data0, ARRAY_SIZE(r_data0));
+	ret |= fg_read_regs(p, MAX17042_MODEL2, r_data1, ARRAY_SIZE(r_data1));
+	ret |= fg_read_regs(p, MAX17042_MODEL3, r_data2, ARRAY_SIZE(r_data2));
+
+	if (ret)
+		printf("%s: Cell parameters read failed!\n", __func__);
+
+	for (i = 0; i < 16; i++) {
+		if ((cell_character0[i] != r_data0[i])
+		    || (cell_character1[i] != r_data1[i])
+		    || (cell_character2[i] != r_data2[i]))
+			goto rewrite_model;
+		}
+
+	/* Lock model access */
+	pmic_reg_write(p, MAX17042_MLOCKReg1, MODEL_LOCK1);
+	pmic_reg_write(p, MAX17042_MLOCKReg2, MODEL_LOCK2);
+
+	/* Verify the model access is locked */
+	ret |= fg_read_regs(p, MAX17042_MODEL1, r_data0, ARRAY_SIZE(r_data0));
+	ret |= fg_read_regs(p, MAX17042_MODEL2, r_data1, ARRAY_SIZE(r_data1));
+	ret |= fg_read_regs(p, MAX17042_MODEL3, r_data2, ARRAY_SIZE(r_data2));
+
+	if (ret) {
+		printf("%s: Cell parameters read failed!\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(r_data0); i++) {
+		/* Check if model locked */
+		if (r_data0[i] || r_data1[i] || r_data2[i]) {
+			/* Rewrite model data - prevent from endless loop */
+			if (rewrite_count--) {
+				puts("FG - Lock model access failed!\n");
+				goto rewrite_model;
+			}
+		}
+	}
+
+	/* Write Custom Parameters */
+	fg_write_and_verify(p, MAX17042_RCOMP0, RCOMP0);
+	fg_write_and_verify(p, MAX17042_TEMPCO, TempCo);
+
+	/* Delay at least 350mS */
+	mdelay(350);
+
+	/* Initialization Complete */
+	pmic_reg_read(p, MAX17042_STATUS, &val);
+	/* Write and Verify Status with POR bit Cleared */
+	fg_write_and_verify(p, MAX17042_STATUS, val & ~MAX17042_POR);
+
+	/* Delay at least 350 ms */
+	mdelay(350);
+}
+
+static int power_update_battery(struct pmic *p, struct pmic *bat)
+{
+	struct power_battery *pb = bat->pbat;
+	unsigned int val;
+	int ret = 0;
+
+	if (pmic_probe(p)) {
+		puts("Can't find max17042 fuel gauge\n");
+		return -1;
+	}
+
+	ret |= pmic_reg_read(p, MAX17042_VFSOC, &val);
+	pb->bat->state_of_chrg = (val >> 8);
+
+	pmic_reg_read(p, MAX17042_VCELL, &val);
+	debug("vfsoc: 0x%x\n", val);
+	pb->bat->voltage_uV = ((val & 0xFFUL) >> 3) + ((val & 0xFF00) >> 3);
+	pb->bat->voltage_uV = (pb->bat->voltage_uV * 625);
+
+	pmic_reg_read(p, 0x05, &val);
+	pb->bat->capacity = val >> 2;
+
+	return ret;
+}
+
+static int power_check_battery(struct pmic *p, struct pmic *bat)
+{
+	struct power_battery *pb = bat->pbat;
+	unsigned int val;
+	int ret = 0;
+
+	if (pmic_probe(p)) {
+		puts("Can't find max17042 fuel gauge\n");
+		return -1;
+	}
+
+	ret |= pmic_reg_read(p, MAX17042_STATUS, &val);
+	debug("fg status: 0x%x\n", val);
+
+	if (val == MAX17042_POR)
+		por_fuelgauge_init(p);
+
+	ret |= pmic_reg_read(p, MAX17042_VERSION, &val);
+	pb->bat->version = val;
+
+	power_update_battery(p, bat);
+	debug("fg ver: 0x%x\n", pb->bat->version);
+	printf("BAT: state_of_charge(SOC):%d%%\n",
+	       pb->bat->state_of_chrg);
+
+	printf("     voltage: %d.%6.6d [V] (expected to be %d [mAh])\n",
+	       pb->bat->voltage_uV / 1000000,
+	       pb->bat->voltage_uV % 1000000,
+	       pb->bat->capacity);
+
+	if (pb->bat->voltage_uV > 3850000)
+		pb->bat->state = EXT_SOURCE;
+	else if (pb->bat->voltage_uV < 3600000 || pb->bat->state_of_chrg < 5)
+		pb->bat->state = CHARGE;
+	else
+		pb->bat->state = NORMAL;
+
+	return ret;
+}
+
+static struct power_fg power_fg_ops = {
+	.fg_battery_check = power_check_battery,
+	.fg_battery_update = power_update_battery,
+};
+
+int power_fg_init(unsigned char bus)
+{
+	static const char name[] = "MAX17042_FG";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	debug("Board Fuel Gauge init\n");
+
+	p->name = name;
+	p->interface = PMIC_I2C;
+	p->number_of_regs = FG_NUM_OF_REGS;
+	p->hw.i2c.addr = MAX17042_I2C_ADDR;
+	p->hw.i2c.tx_num = 2;
+	p->sensor_byte_order = PMIC_SENSOR_BYTE_ORDER_BIG;
+	p->bus = bus;
+
+	p->fg = &power_fg_ops;
+	return 0;
+}
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
new file mode 100644
index 0000000..e19a9a8
--- /dev/null
+++ b/drivers/power/pmic/Makefile
@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2012 Samsung Electronics
+# Lukasz Majewski <l.majewski@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)libpmic.o
+
+COBJS-$(CONFIG_POWER_MAX8998) += pmic_max8998.o
+COBJS-$(CONFIG_POWER_MAX8997) += pmic_max8997.o
+COBJS-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+########################################################################
diff --git a/drivers/power/pmic/muic_max8997.c b/drivers/power/pmic/muic_max8997.c
new file mode 100644
index 0000000..d5095c8
--- /dev/null
+++ b/drivers/power/pmic/muic_max8997.c
@@ -0,0 +1,90 @@
+/*
+ *  Copyright (C) 2012 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <power/pmic.h>
+#include <power/power_chrg.h>
+#include <power/max8997_muic.h>
+#include <i2c.h>
+#include <errno.h>
+
+static int power_chrg_get_type(struct pmic *p)
+{
+	unsigned int val;
+	unsigned char charge_type, charger;
+
+	if (pmic_probe(p))
+		return CHARGER_NO;
+
+	pmic_reg_read(p, MAX8997_MUIC_STATUS2, &val);
+	charge_type = val & MAX8997_MUIC_CHG_MASK;
+
+	switch (charge_type) {
+	case MAX8997_MUIC_CHG_NO:
+		charger = CHARGER_NO;
+		break;
+	case MAX8997_MUIC_CHG_USB:
+	case MAX8997_MUIC_CHG_USB_D:
+		charger = CHARGER_USB;
+		break;
+	case MAX8997_MUIC_CHG_TA:
+	case MAX8997_MUIC_CHG_TA_1A:
+		charger = CHARGER_TA;
+		break;
+	case MAX8997_MUIC_CHG_TA_500:
+		charger = CHARGER_TA_500;
+		break;
+	default:
+		charger = CHARGER_UNKNOWN;
+		break;
+	}
+
+	return charger;
+}
+
+static struct power_chrg power_chrg_muic_ops = {
+	.chrg_type = power_chrg_get_type,
+};
+
+int power_muic_init(unsigned int bus)
+{
+	static const char name[] = "MAX8997_MUIC";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	debug("Board Micro USB Interface Controller init\n");
+
+	p->name = name;
+	p->interface = PMIC_I2C;
+	p->number_of_regs = MUIC_NUM_OF_REGS;
+	p->hw.i2c.addr = MAX8997_MUIC_I2C_ADDR;
+	p->hw.i2c.tx_num = 1;
+	p->bus = bus;
+
+	p->chrg = &power_chrg_muic_ops;
+	return 0;
+}
diff --git a/drivers/power/pmic/pmic_max8997.c b/drivers/power/pmic/pmic_max8997.c
new file mode 100644
index 0000000..4e5c6d6
--- /dev/null
+++ b/drivers/power/pmic/pmic_max8997.c
@@ -0,0 +1,123 @@
+/*
+ *  Copyright (C) 2012 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <power/pmic.h>
+#include <power/max8997_pmic.h>
+#include <i2c.h>
+#include <errno.h>
+
+unsigned char max8997_reg_ldo(int uV)
+{
+	unsigned char ret;
+	if (uV <= 800000)
+		return 0;
+	if (uV >= 3950000)
+		return MAX8997_LDO_MAX_VAL;
+	ret = (uV - 800000) / 50000;
+	if (ret > MAX8997_LDO_MAX_VAL) {
+		printf("MAX8997 LDO SETTING ERROR (%duV) -> %u\n", uV, ret);
+		ret = MAX8997_LDO_MAX_VAL;
+	}
+
+	return ret;
+}
+
+static int pmic_charger_state(struct pmic *p, int state, int current)
+{
+	unsigned char fc;
+	u32 val = 0;
+
+	if (pmic_probe(p))
+		return -1;
+
+	if (state == CHARGER_DISABLE) {
+		puts("Disable the charger.\n");
+		pmic_reg_read(p, MAX8997_REG_MBCCTRL2, &val);
+		val &= ~(MBCHOSTEN | VCHGR_FC);
+		pmic_reg_write(p, MAX8997_REG_MBCCTRL2, val);
+
+		return -1;
+	}
+
+	if (current < CHARGER_MIN_CURRENT || current > CHARGER_MAX_CURRENT) {
+		printf("%s: Wrong charge current: %d [mA]\n",
+		       __func__, current);
+		return -1;
+	}
+
+	fc = (current - CHARGER_MIN_CURRENT) / CHARGER_CURRENT_RESOLUTION;
+	fc = fc & 0xf; /* up to 950 mA */
+
+	printf("Enable the charger @ %d [mA]\n", fc * CHARGER_CURRENT_RESOLUTION
+	       + CHARGER_MIN_CURRENT);
+
+	val = fc | MBCICHFCSET;
+	pmic_reg_write(p, MAX8997_REG_MBCCTRL4, val);
+
+	pmic_reg_read(p, MAX8997_REG_MBCCTRL2, &val);
+	val = MBCHOSTEN | VCHGR_FC; /* enable charger & fast charge */
+	pmic_reg_write(p, MAX8997_REG_MBCCTRL2, val);
+
+	return 0;
+}
+
+static int pmic_charger_bat_present(struct pmic *p)
+{
+	u32 val;
+
+	if (pmic_probe(p))
+		return -1;
+
+	pmic_reg_read(p, MAX8997_REG_STATUS4, &val);
+
+	return !(val & DETBAT);
+}
+
+static struct power_chrg power_chrg_pmic_ops = {
+	.chrg_bat_present = pmic_charger_bat_present,
+	.chrg_state = pmic_charger_state,
+};
+
+int pmic_init(unsigned char bus)
+{
+	static const char name[] = "MAX8997_PMIC";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	debug("Board PMIC init\n");
+
+	p->name = name;
+	p->interface = PMIC_I2C;
+	p->number_of_regs = PMIC_NUM_OF_REGS;
+	p->hw.i2c.addr = MAX8997_I2C_ADDR;
+	p->hw.i2c.tx_num = 1;
+	p->bus = bus;
+
+	p->chrg = &power_chrg_pmic_ops;
+	return 0;
+}
diff --git a/drivers/misc/pmic_max8998.c b/drivers/power/pmic/pmic_max8998.c
index cc69fd7..452e1c8 100644
--- a/drivers/misc/pmic_max8998.c
+++ b/drivers/power/pmic/pmic_max8998.c
@@ -22,13 +22,19 @@
  */
 
 #include <common.h>
-#include <pmic.h>
-#include <max8998_pmic.h>
+#include <power/pmic.h>
+#include <power/max8998_pmic.h>
+#include <errno.h>
 
-int pmic_init(void)
+int pmic_init(unsigned char bus)
 {
-	struct pmic *p = get_pmic();
 	static const char name[] = "MAX8998_PMIC";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
 
 	puts("Board PMIC init\n");
 
@@ -37,7 +43,7 @@ int pmic_init(void)
 	p->number_of_regs = PMIC_NUM_OF_REGS;
 	p->hw.i2c.addr = MAX8998_I2C_ADDR;
 	p->hw.i2c.tx_num = 1;
-	p->bus = I2C_PMIC;
+	p->bus = bus;
 
 	return 0;
 }
diff --git a/drivers/power/power_core.c b/drivers/power/power_core.c
new file mode 100644
index 0000000..90df2c5
--- /dev/null
+++ b/drivers/power/power_core.c
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de
+ *
+ * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <power/pmic.h>
+
+static LIST_HEAD(pmic_list);
+
+int check_reg(struct pmic *p, u32 reg)
+{
+	if (reg >= p->number_of_regs) {
+		printf("<reg num> = %d is invalid. Should be less than %d\n",
+		       reg, p->number_of_regs);
+		return -1;
+	}
+
+	return 0;
+}
+
+int pmic_set_output(struct pmic *p, u32 reg, int out, int on)
+{
+	u32 val;
+
+	if (pmic_reg_read(p, reg, &val))
+		return -1;
+
+	if (on)
+		val |= out;
+	else
+		val &= ~out;
+
+	if (pmic_reg_write(p, reg, val))
+		return -1;
+
+	return 0;
+}
+
+static void pmic_show_info(struct pmic *p)
+{
+	printf("PMIC: %s\n", p->name);
+}
+
+static int pmic_dump(struct pmic *p)
+{
+	int i, ret;
+	u32 val;
+
+	if (!p) {
+		puts("Wrong PMIC name!\n");
+		return -1;
+	}
+
+	pmic_show_info(p);
+	for (i = 0; i < p->number_of_regs; i++) {
+		ret = pmic_reg_read(p, i, &val);
+		if (ret)
+			puts("PMIC: Registers dump failed\n");
+
+		if (!(i % 8))
+			printf("\n0x%02x: ", i);
+
+		printf("%08x ", val);
+	}
+	puts("\n");
+	return 0;
+}
+
+struct pmic *pmic_alloc(void)
+{
+	struct pmic *p;
+
+	p = calloc(sizeof(*p), 1);
+	if (!p) {
+		printf("%s: No available memory for allocation!\n", __func__);
+		return NULL;
+	}
+
+	list_add_tail(&p->list, &pmic_list);
+
+	debug("%s: new pmic struct: 0x%p\n", __func__, p);
+
+	return p;
+}
+
+struct pmic *pmic_get(const char *s)
+{
+	struct pmic *p;
+
+	list_for_each_entry(p, &pmic_list, list) {
+		if (strcmp(p->name, s) == 0) {
+			debug("%s: pmic %s -> 0x%p\n", __func__, p->name, p);
+			return p;
+		}
+	}
+
+	return NULL;
+}
+
+const char *power_get_interface(int interface)
+{
+	const char *power_interface[] = {"I2C", "SPI", "|+|-|"};
+	return power_interface[interface];
+}
+
+static void pmic_list_names(void)
+{
+	struct pmic *p;
+
+	puts("PMIC devices:\n");
+	list_for_each_entry(p, &pmic_list, list) {
+		printf("name: %s bus: %s_%d\n", p->name,
+		       power_get_interface(p->interface), p->bus);
+	}
+}
+
+int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	u32 ret, reg, val;
+	char *cmd, *name;
+	struct pmic *p;
+
+	/* at least two arguments please */
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	if (strcmp(argv[1], "list") == 0) {
+		pmic_list_names();
+		return CMD_RET_SUCCESS;
+	}
+
+	name = argv[1];
+	cmd = argv[2];
+
+	debug("%s: name: %s cmd: %s\n", __func__, name, cmd);
+	p = pmic_get(name);
+	if (!p)
+		return CMD_RET_FAILURE;
+
+	if (strcmp(cmd, "dump") == 0) {
+		if (pmic_dump(p))
+			return CMD_RET_FAILURE;
+		return CMD_RET_SUCCESS;
+	}
+
+	if (strcmp(cmd, "read") == 0) {
+		if (argc < 4)
+			return CMD_RET_USAGE;
+
+		reg = simple_strtoul(argv[3], NULL, 16);
+		ret = pmic_reg_read(p, reg, &val);
+
+		if (ret)
+			puts("PMIC: Register read failed\n");
+
+		printf("\n0x%02x: 0x%08x\n", reg, val);
+
+		return CMD_RET_SUCCESS;
+	}
+
+	if (strcmp(cmd, "write") == 0) {
+		if (argc < 5)
+			return CMD_RET_USAGE;
+
+		reg = simple_strtoul(argv[3], NULL, 16);
+		val = simple_strtoul(argv[4], NULL, 16);
+		pmic_reg_write(p, reg, val);
+
+		return CMD_RET_SUCCESS;
+	}
+
+	if (strcmp(cmd, "bat") == 0) {
+		if (argc < 4)
+			return CMD_RET_USAGE;
+
+		if (strcmp(argv[3], "state") == 0)
+			p->fg->fg_battery_check(p->pbat->fg, p);
+
+		if (strcmp(argv[3], "charge") == 0) {
+			if (p->pbat) {
+				printf("PRINT BAT charge %s\n", p->name);
+				if (p->low_power_mode)
+					p->low_power_mode();
+				if (p->pbat->battery_charge)
+					p->pbat->battery_charge(p);
+			}
+		}
+
+		return CMD_RET_SUCCESS;
+	}
+
+	/* No subcommand found */
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+	pmic,	CONFIG_SYS_MAXARGS, 1, do_pmic,
+	"PMIC",
+	"list - list available PMICs\n"
+	"pmic name dump - dump named PMIC registers\n"
+	"pmic name read <reg> - read register\n"
+	"pmic name write <reg> <value> - write register\n"
+	"pmic name bat state - write register\n"
+	"pmic name bat charge - write register\n"
+);
diff --git a/drivers/misc/pmic_dialog.c b/drivers/power/power_dialog.c
index e97af1d..d7ebd15 100644
--- a/drivers/misc/pmic_dialog.c
+++ b/drivers/power/power_dialog.c
@@ -17,13 +17,19 @@
  */
 
 #include <common.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <dialog_pmic.h>
+#include <errno.h>
 
-int pmic_dialog_init(void)
+int pmic_dialog_init(unsigned char bus)
 {
-	struct pmic *p = get_pmic();
 	static const char name[] = "DIALOG_PMIC";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
 
 	p->name = name;
 	p->number_of_regs = DIALOG_NUM_OF_REGS;
@@ -31,7 +37,7 @@ int pmic_dialog_init(void)
 	p->interface = PMIC_I2C;
 	p->hw.i2c.addr = CONFIG_SYS_DIALOG_PMIC_I2C_ADDR;
 	p->hw.i2c.tx_num = 1;
-	p->bus = I2C_PMIC;
+	p->bus = bus;
 
 	return 0;
 }
diff --git a/drivers/misc/pmic_fsl.c b/drivers/power/power_fsl.c
index c8d4c8d..a663831 100644
--- a/drivers/misc/pmic_fsl.c
+++ b/drivers/power/power_fsl.c
@@ -23,8 +23,9 @@
 
 #include <common.h>
 #include <spi.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
+#include <errno.h>
 
 #if defined(CONFIG_PMIC_FSL_MC13892)
 #define FSL_PMIC_I2C_LENGTH	3
@@ -32,22 +33,27 @@
 #define FSL_PMIC_I2C_LENGTH	1
 #endif
 
-#if defined(CONFIG_PMIC_SPI)
+#if defined(CONFIG_POWER_SPI)
 static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write)
 {
 	return (write << 31) | (reg << 25) | (*val & 0x00FFFFFF);
 }
 #endif
 
-int pmic_init(void)
+int pmic_init(unsigned char bus)
 {
-	struct pmic *p = get_pmic();
 	static const char name[] = "FSL_PMIC";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
 
 	p->name = name;
 	p->number_of_regs = PMIC_NUM_OF_REGS;
 
-#if defined(CONFIG_PMIC_SPI)
+#if defined(CONFIG_POWER_SPI)
 	p->interface = PMIC_SPI;
 	p->bus = CONFIG_FSL_PMIC_BUS;
 	p->hw.spi.cs = CONFIG_FSL_PMIC_CS;
@@ -56,13 +62,13 @@ int pmic_init(void)
 	p->hw.spi.bitlen = CONFIG_FSL_PMIC_BITLEN;
 	p->hw.spi.flags = SPI_XFER_BEGIN | SPI_XFER_END;
 	p->hw.spi.prepare_tx = pmic_spi_prepare_tx;
-#elif defined(CONFIG_PMIC_I2C)
+#elif defined(CONFIG_POWER_I2C)
 	p->interface = PMIC_I2C;
 	p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
 	p->hw.i2c.tx_num = FSL_PMIC_I2C_LENGTH;
-	p->bus = I2C_PMIC;
+	p->bus = bus;
 #else
-#error "You must select CONFIG_PMIC_SPI or CONFIG_PMIC_I2C"
+#error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C"
 #endif
 
 	return 0;
diff --git a/drivers/misc/pmic_i2c.c b/drivers/power/power_i2c.c
index 95a3365..3e5a784 100644
--- a/drivers/misc/pmic_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -28,24 +28,40 @@
 
 #include <common.h>
 #include <linux/types.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <i2c.h>
+#include <compiler.h>
 
 int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
 {
 	unsigned char buf[4] = { 0 };
 
-	if (check_reg(reg))
+	if (check_reg(p, reg))
 		return -1;
 
 	switch (pmic_i2c_tx_num) {
 	case 3:
-		buf[0] = (val >> 16) & 0xff;
-		buf[1] = (val >> 8) & 0xff;
-		buf[2] = val & 0xff;
+		if (p->sensor_byte_order == PMIC_SENSOR_BYTE_ORDER_BIG) {
+			buf[2] = (cpu_to_le32(val) >> 16) & 0xff;
+			buf[1] = (cpu_to_le32(val) >> 8) & 0xff;
+			buf[0] = cpu_to_le32(val) & 0xff;
+		} else {
+			buf[0] = (cpu_to_le32(val) >> 16) & 0xff;
+			buf[1] = (cpu_to_le32(val) >> 8) & 0xff;
+			buf[2] = cpu_to_le32(val) & 0xff;
+		}
+		break;
+	case 2:
+		if (p->sensor_byte_order == PMIC_SENSOR_BYTE_ORDER_BIG) {
+			buf[1] = (cpu_to_le32(val) >> 8) & 0xff;
+			buf[0] = cpu_to_le32(val) & 0xff;
+		} else {
+			buf[0] = (cpu_to_le32(val) >> 8) & 0xff;
+			buf[1] = cpu_to_le32(val) & 0xff;
+		}
 		break;
 	case 1:
-		buf[0] = val & 0xff;
+		buf[0] = cpu_to_le32(val) & 0xff;
 		break;
 	default:
 		printf("%s: invalid tx_num: %d", __func__, pmic_i2c_tx_num);
@@ -63,7 +79,7 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
 	unsigned char buf[4] = { 0 };
 	u32 ret_val = 0;
 
-	if (check_reg(reg))
+	if (check_reg(p, reg))
 		return -1;
 
 	if (i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num))
@@ -71,10 +87,21 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
 
 	switch (pmic_i2c_tx_num) {
 	case 3:
-		ret_val = buf[0] << 16 | buf[1] << 8 | buf[2];
+		if (p->sensor_byte_order == PMIC_SENSOR_BYTE_ORDER_BIG)
+			ret_val = le32_to_cpu(buf[2] << 16
+					      | buf[1] << 8 | buf[0]);
+		else
+			ret_val = le32_to_cpu(buf[0] << 16 |
+					      buf[1] << 8 | buf[2]);
+		break;
+	case 2:
+		if (p->sensor_byte_order == PMIC_SENSOR_BYTE_ORDER_BIG)
+			ret_val = le32_to_cpu(buf[1] << 8 | buf[0]);
+		else
+			ret_val = le32_to_cpu(buf[0] << 8 | buf[1]);
 		break;
 	case 1:
-		ret_val = buf[0];
+		ret_val = le32_to_cpu(buf[0]);
 		break;
 	default:
 		printf("%s: invalid tx_num: %d", __func__, pmic_i2c_tx_num);
@@ -88,7 +115,7 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
 int pmic_probe(struct pmic *p)
 {
 	I2C_SET_BUS(p->bus);
-	debug("PMIC:%s probed!\n", p->name);
+	debug("Bus: %d PMIC:%s probed!\n", p->bus, p->name);
 	if (i2c_probe(pmic_i2c_addr)) {
 		printf("Can't find PMIC:%s\n", p->name);
 		return -1;
diff --git a/drivers/misc/pmic_spi.c b/drivers/power/power_spi.c
index 5a0dd22..27488ea 100644
--- a/drivers/misc/pmic_spi.c
+++ b/drivers/power/power_spi.c
@@ -28,7 +28,7 @@
 
 #include <common.h>
 #include <linux/types.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <spi.h>
 
 static struct spi_slave *slave;
@@ -59,7 +59,7 @@ static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write)
 			return -1;
 	}
 
-	if (check_reg(reg))
+	if (check_reg(p, reg))
 		return -1;
 
 	if (spi_claim_bus(slave))
diff --git a/drivers/rtc/mc13xxx-rtc.c b/drivers/rtc/mc13xxx-rtc.c
index 70ea8a1..e79f462 100644
--- a/drivers/rtc/mc13xxx-rtc.c
+++ b/drivers/rtc/mc13xxx-rtc.c
@@ -23,16 +23,18 @@
 #include <common.h>
 #include <rtc.h>
 #include <spi.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <fsl_pmic.h>
 
 int rtc_get(struct rtc_time *rtc)
 {
 	u32 day1, day2, time;
 	int tim, i = 0;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("FSL_PMIC");
 	int ret;
 
+	if (!p)
+		return -1;
 	do {
 		ret = pmic_reg_read(p, REG_RTC_DAY, &day1);
 		if (ret < 0)
@@ -61,7 +63,9 @@ int rtc_get(struct rtc_time *rtc)
 int rtc_set(struct rtc_time *rtc)
 {
 	u32 time, day;
-	struct pmic *p = get_pmic();
+	struct pmic *p = pmic_get("FSL_PMIC");
+	if (!p)
+		return -1;
 
 	time = mktime(rtc->tm_year, rtc->tm_mon, rtc->tm_mday,
 		      rtc->tm_hour, rtc->tm_min, rtc->tm_sec);
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 9027781..bbd91ca 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -36,6 +36,9 @@
 
 void NS16550_init(NS16550_t com_port, int baud_divisor)
 {
+	while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT))
+		;
+
 	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
 #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
 					defined(CONFIG_AM33XX)
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index c1c0134..fc01a3c 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -31,6 +31,8 @@
 
 #include <serial.h>
 
+#ifndef CONFIG_NS16550_MIN_FUNCTIONS
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #if !defined(CONFIG_CONS_INDEX)
@@ -304,3 +306,5 @@ void ns16550_serial_initialize(void)
 	serial_register(&eserial6_device);
 #endif
 }
+
+#endif /* !CONFIG_NS16550_MIN_FUNCTIONS */
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index b331be7..dfdba9f 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -163,8 +163,8 @@ static int pl01x_serial_init(void)
 	}
 #endif
 	/* Finally, enable the UART */
-	writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE,
-	       &regs->pl011_cr);
+	writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE |
+	       UART_PL011_CR_RTS, &regs->pl011_cr);
 
 	return 0;
 }
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 3c931d0..ee1f2d7 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -117,6 +117,14 @@ static int serial_rx_fifo_level(void)
 	return scif_rxfill(&sh_sci);
 }
 
+static void handle_error(void)
+{
+	sci_in(&sh_sci, SCxSR);
+	sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci));
+	sci_in(&sh_sci, SCLSR);
+	sci_out(&sh_sci, SCLSR, 0x00);
+}
+
 void serial_raw_putc(const char c)
 {
 	while (1) {
@@ -138,16 +146,14 @@ static void sh_serial_putc(const char c)
 
 static int sh_serial_tstc(void)
 {
+	if (sci_in(&sh_sci, SCxSR) & SCIF_ERRORS) {
+		handle_error();
+		return 0;
+	}
+
 	return serial_rx_fifo_level() ? 1 : 0;
 }
 
-void handle_error(void)
-{
-	sci_in(&sh_sci, SCxSR);
-	sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci));
-	sci_in(&sh_sci, SCLSR);
-	sci_out(&sh_sci, SCLSR, 0x00);
-}
 
 int serial_getc_check(void)
 {
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index f88d0c1..f9163a8 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -27,7 +27,6 @@
 #include <linux/string.h>
 
 #include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
 #include <linux/usb/gadget.h>
 
 
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index b656c8b..5b8776e 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -23,7 +23,6 @@
 
 #include <common.h>
 #include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
 #include <asm/errno.h>
 #include <linux/usb/gadget.h>
 #include <asm/unaligned.h>
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 8b24e00..de880ff 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -24,7 +24,6 @@
 #include <asm/errno.h>
 #include <linux/netdevice.h>
 #include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
 #include <linux/usb/cdc.h>
 #include <linux/usb/gadget.h>
 #include <net.h>
diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c
index 3ec4c65..10547e3 100644
--- a/drivers/usb/gadget/f_dfu.c
+++ b/drivers/usb/gadget/f_dfu.c
@@ -25,7 +25,6 @@
 #include <malloc.h>
 
 #include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/composite.h>
 
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 02cae0f..e570142 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -125,8 +125,8 @@
 #endif
 
 /* Mentor high speed "dual role" controller, in peripheral role */
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-#define gadget_is_musbhdrc(g)	(!strcmp("musb_hdrc", (g)->name))
+#ifdef CONFIG_MUSB_GADGET
+#define gadget_is_musbhdrc(g)	(!strcmp("musb-hdrc", (g)->name))
 #else
 #define gadget_is_musbhdrc(g)	0
 #endif
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c
index 3fdfdf7..f9d24e3 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -37,7 +37,6 @@
 #include <malloc.h>
 
 #include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
 #include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 4dbe060..95555cf 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -13,7 +13,6 @@
 #include <common.h>
 #include <asm/errno.h>
 #include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
 #include <linux/usb/gadget.h>
 
 #include <asm/unaligned.h>
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index d90e94d..7f98a63 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -210,6 +210,18 @@ static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
 	return 0;
 }
 
+static inline u8 ehci_encode_speed(enum usb_device_speed speed)
+{
+	#define QH_HIGH_SPEED	2
+	#define QH_FULL_SPEED	0
+	#define QH_LOW_SPEED	1
+	if (speed == USB_SPEED_HIGH)
+		return QH_HIGH_SPEED;
+	if (speed == USB_SPEED_LOW)
+		return QH_LOW_SPEED;
+	return QH_FULL_SPEED;
+}
+
 static int
 ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 		   int length, struct devrequest *req)
@@ -318,12 +330,12 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 	 * - qh_overlay.qt_altnext
 	 */
 	qh->qh_link = cpu_to_hc32((uint32_t)&ctrl->qh_list | QH_LINK_TYPE_QH);
-	c = usb_pipespeed(pipe) != USB_SPEED_HIGH && !usb_pipeendpoint(pipe);
+	c = (dev->speed != USB_SPEED_HIGH) && !usb_pipeendpoint(pipe);
 	maxpacket = usb_maxpacket(dev, pipe);
 	endpt = QH_ENDPT1_RL(8) | QH_ENDPT1_C(c) |
 		QH_ENDPT1_MAXPKTLEN(maxpacket) | QH_ENDPT1_H(0) |
 		QH_ENDPT1_DTC(QH_ENDPT1_DTC_DT_FROM_QTD) |
-		QH_ENDPT1_EPS(usb_pipespeed(pipe)) |
+		QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) |
 		QH_ENDPT1_ENDPT(usb_pipeendpoint(pipe)) | QH_ENDPT1_I(0) |
 		QH_ENDPT1_DEVADDR(usb_pipedevice(pipe));
 	qh->qh_endpt1 = cpu_to_hc32(endpt);
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 19e16a4..289018c 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -617,7 +617,7 @@ static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe,
 	int epnum = usb_pipeendpoint(pipe);
 	int max = usb_maxpacket(dev, pipe);
 	int dir_out = usb_pipeout(pipe);
-	int speed_low = usb_pipeslow(pipe);
+	int speed_low = (dev->speed == USB_SPEED_LOW);
 	int i, done = 0, stat, timeout, cc;
 
 	/* 500 frames or 0.5s timeout when function is busy and NAKs transactions for a while */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index c2106ad..bdbe250 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -803,7 +803,7 @@ static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe,
 			| (usb_pipeisoc(pipe)? 0x8000: 0)
 			| (usb_pipecontrol(pipe)? 0: \
 					   (usb_pipeout(pipe)? 0x800: 0x1000))
-			| usb_pipeslow(pipe) << 13
+			| (usb_dev->speed == USB_SPEED_LOW) << 13
 			| usb_maxpacket(usb_dev, pipe) << 16);
 
 	if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) {
diff --git a/drivers/usb/host/ohci-s3c24xx.c b/drivers/usb/host/ohci-s3c24xx.c
index 03cd4c3..dde0764 100644
--- a/drivers/usb/host/ohci-s3c24xx.c
+++ b/drivers/usb/host/ohci-s3c24xx.c
@@ -620,7 +620,7 @@ static struct ed *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe)
 			      | (usb_pipeisoc(pipe) ? 0x8000 : 0)
 			      | (usb_pipecontrol(pipe) ? 0 :
 				 (usb_pipeout(pipe) ? 0x800 : 0x1000))
-			      | usb_pipeslow(pipe) << 13 |
+			      | (usb_dev->speed == USB_SPEED_LOW) << 13 |
 			      usb_maxpacket(usb_dev, pipe) << 16);
 
 	return ed_ret;
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 2a4e7ff..b503b35 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -31,9 +31,6 @@
 #endif
 
 static const char hcd_name[] = "r8a66597_hcd";
-static unsigned short clock = CONFIG_R8A66597_XTAL;
-static unsigned short vif = CONFIG_R8A66597_LDRV;
-static unsigned short endian = CONFIG_R8A66597_ENDIAN;
 static struct r8a66597 gr8a66597;
 
 static void get_hub_data(struct usb_device *dev, u16 *hub_devnum, u16 *hubport)
@@ -96,7 +93,7 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
 		}
 	} while ((tmp & USBE) != USBE);
 	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
-	r8a66597_mdfy(r8a66597, clock, XTAL, SYSCFG0);
+	r8a66597_mdfy(r8a66597, CONFIG_R8A66597_XTAL, XTAL, SYSCFG0);
 
 	i = 0;
 	r8a66597_bset(r8a66597, XCKE, SYSCFG0);
@@ -162,7 +159,7 @@ static int enable_controller(struct r8a66597 *r8a66597)
 	if (ret < 0)
 		return ret;
 
-	r8a66597_bset(r8a66597, vif & LDRV, PINCFG);
+	r8a66597_bset(r8a66597, CONFIG_R8A66597_LDRV & LDRV, PINCFG);
 	r8a66597_bset(r8a66597, USBE, SYSCFG0);
 
 	r8a66597_bset(r8a66597, INTL, SOFCFG);
@@ -170,9 +167,9 @@ static int enable_controller(struct r8a66597 *r8a66597)
 	r8a66597_write(r8a66597, 0, INTENB1);
 	r8a66597_write(r8a66597, 0, INTENB2);
 
-	r8a66597_bset(r8a66597, endian & BIGEND, CFIFOSEL);
-	r8a66597_bset(r8a66597, endian & BIGEND, D0FIFOSEL);
-	r8a66597_bset(r8a66597, endian & BIGEND, D1FIFOSEL);
+	r8a66597_bset(r8a66597, CONFIG_R8A66597_ENDIAN & BIGEND, CFIFOSEL);
+	r8a66597_bset(r8a66597, CONFIG_R8A66597_ENDIAN & BIGEND, D0FIFOSEL);
+	r8a66597_bset(r8a66597, CONFIG_R8A66597_ENDIAN & BIGEND, D1FIFOSEL);
 	r8a66597_bset(r8a66597, TRNENSEL, SOFCFG);
 
 	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
@@ -673,7 +670,6 @@ static int r8a66597_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
 	int stat = 0;
 	__u16 bmRType_bReq;
 	__u16 wValue;
-	__u16 wIndex;
 	__u16 wLength;
 	unsigned char data[32];
 
@@ -686,7 +682,6 @@ static int r8a66597_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
 
 	bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
 	wValue	      = cpu_to_le16 (cmd->value);
-	wIndex	      = cpu_to_le16 (cmd->index);
 	wLength	      = cpu_to_le16 (cmd->length);
 
 	switch (bmRType_bReq) {
@@ -908,7 +903,7 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 	return 0;
 }
 
-int usb_lowlevel_init(int index, void **controller))
+int usb_lowlevel_init(int index, void **controller)
 {
 	struct r8a66597 *r8a66597 = &gr8a66597;
 
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 2830616..417f1a8 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -234,7 +234,7 @@ static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *b
 	__u16 status = 0;
 	int err = 0, time_start = get_timer(0);
 	int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
-		usb_pipeslow(pipe);
+		(dev->speed == USB_SPEED_LOW);
 
 	if (len > 239)
 		return -1;
diff --git a/drivers/usb/musb-new/Makefile b/drivers/usb/musb-new/Makefile
new file mode 100644
index 0000000..c23bef1
--- /dev/null
+++ b/drivers/usb/musb-new/Makefile
@@ -0,0 +1,39 @@
+#
+# for USB OTG silicon based on Mentor Graphics INVENTRA designs
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)libusb_musb-new.o
+
+COBJS-$(CONFIG_MUSB_GADGET) += musb_gadget.o musb_gadget_ep0.o musb_core.o
+COBJS-$(CONFIG_MUSB_GADGET) += musb_uboot.o
+COBJS-$(CONFIG_MUSB_HOST) += musb_host.o musb_core.o musb_uboot.o
+COBJS-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o
+COBJS-$(CONFIG_USB_MUSB_AM35X) += am35x.o
+COBJS-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o
+
+CFLAGS_NO_WARN := $(call cc-option,-Wno-unused-variable) \
+			$(call cc-option,-Wno-unused-but-set-variable) \
+			$(call cc-option,-Wno-unused-label)
+CFLAGS += $(CFLAGS_NO_WARN)
+
+COBJS	:= $(sort $(COBJS-y))
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+#$(LIB):	$(OBJS)
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
+
diff --git a/drivers/usb/musb-new/am35x.c b/drivers/usb/musb-new/am35x.c
new file mode 100644
index 0000000..57c9bd3
--- /dev/null
+++ b/drivers/usb/musb-new/am35x.c
@@ -0,0 +1,709 @@
+/*
+ * Texas Instruments AM35x "glue layer"
+ *
+ * Copyright (c) 2010, by Texas Instruments
+ *
+ * Based on the DA8xx "glue layer" code.
+ * Copyright (c) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/usb.h>
+#else
+#include <common.h>
+#include <asm/omap_musb.h>
+#include "linux-compat.h"
+#endif
+
+#include "musb_core.h"
+
+/*
+ * AM35x specific definitions
+ */
+/* USB 2.0 OTG module registers */
+#define USB_REVISION_REG	0x00
+#define USB_CTRL_REG		0x04
+#define USB_STAT_REG		0x08
+#define USB_EMULATION_REG	0x0c
+/* 0x10 Reserved */
+#define USB_AUTOREQ_REG		0x14
+#define USB_SRP_FIX_TIME_REG	0x18
+#define USB_TEARDOWN_REG	0x1c
+#define EP_INTR_SRC_REG		0x20
+#define EP_INTR_SRC_SET_REG	0x24
+#define EP_INTR_SRC_CLEAR_REG	0x28
+#define EP_INTR_MASK_REG	0x2c
+#define EP_INTR_MASK_SET_REG	0x30
+#define EP_INTR_MASK_CLEAR_REG	0x34
+#define EP_INTR_SRC_MASKED_REG	0x38
+#define CORE_INTR_SRC_REG	0x40
+#define CORE_INTR_SRC_SET_REG	0x44
+#define CORE_INTR_SRC_CLEAR_REG	0x48
+#define CORE_INTR_MASK_REG	0x4c
+#define CORE_INTR_MASK_SET_REG	0x50
+#define CORE_INTR_MASK_CLEAR_REG 0x54
+#define CORE_INTR_SRC_MASKED_REG 0x58
+/* 0x5c Reserved */
+#define USB_END_OF_INTR_REG	0x60
+
+/* Control register bits */
+#define AM35X_SOFT_RESET_MASK	1
+
+/* USB interrupt register bits */
+#define AM35X_INTR_USB_SHIFT	16
+#define AM35X_INTR_USB_MASK	(0x1ff << AM35X_INTR_USB_SHIFT)
+#define AM35X_INTR_DRVVBUS	0x100
+#define AM35X_INTR_RX_SHIFT	16
+#define AM35X_INTR_TX_SHIFT	0
+#define AM35X_TX_EP_MASK	0xffff		/* EP0 + 15 Tx EPs */
+#define AM35X_RX_EP_MASK	0xfffe		/* 15 Rx EPs */
+#define AM35X_TX_INTR_MASK	(AM35X_TX_EP_MASK << AM35X_INTR_TX_SHIFT)
+#define AM35X_RX_INTR_MASK	(AM35X_RX_EP_MASK << AM35X_INTR_RX_SHIFT)
+
+#define USB_MENTOR_CORE_OFFSET	0x400
+
+struct am35x_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*phy_clk;
+	struct clk		*clk;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
+
+/*
+ * am35x_musb_enable - enable interrupts
+ */
+static void am35x_musb_enable(struct musb *musb)
+{
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 epmask;
+
+	/* Workaround: setup IRQs through both register sets. */
+	epmask = ((musb->epmask & AM35X_TX_EP_MASK) << AM35X_INTR_TX_SHIFT) |
+	       ((musb->epmask & AM35X_RX_EP_MASK) << AM35X_INTR_RX_SHIFT);
+
+	musb_writel(reg_base, EP_INTR_MASK_SET_REG, epmask);
+	musb_writel(reg_base, CORE_INTR_MASK_SET_REG, AM35X_INTR_USB_MASK);
+
+	/* Force the DRVVBUS IRQ so we can start polling for ID change. */
+	if (is_otg_enabled(musb))
+		musb_writel(reg_base, CORE_INTR_SRC_SET_REG,
+			    AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT);
+}
+
+/*
+ * am35x_musb_disable - disable HDRC and flush interrupts
+ */
+static void am35x_musb_disable(struct musb *musb)
+{
+	void __iomem *reg_base = musb->ctrl_base;
+
+	musb_writel(reg_base, CORE_INTR_MASK_CLEAR_REG, AM35X_INTR_USB_MASK);
+	musb_writel(reg_base, EP_INTR_MASK_CLEAR_REG,
+			 AM35X_TX_INTR_MASK | AM35X_RX_INTR_MASK);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
+}
+
+#ifndef __UBOOT__
+#define portstate(stmt)		stmt
+
+static void am35x_musb_set_vbus(struct musb *musb, int is_on)
+{
+	WARN_ON(is_on && is_peripheral_active(musb));
+}
+
+#define	POLL_SECONDS	2
+
+static struct timer_list otg_workaround;
+
+static void otg_timer(unsigned long _musb)
+{
+	struct musb		*musb = (void *)_musb;
+	void __iomem		*mregs = musb->mregs;
+	u8			devctl;
+	unsigned long		flags;
+
+	/*
+	 * We poll because AM35x's won't expose several OTG-critical
+	 * status change events (from the transceiver) otherwise.
+	 */
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
+	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
+		otg_state_string(musb->xceiv->state));
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv->state) {
+	case OTG_STATE_A_WAIT_BCON:
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE) {
+			musb->xceiv->state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		} else {
+			musb->xceiv->state = OTG_STATE_A_IDLE;
+			MUSB_HST_MODE(musb);
+		}
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+		musb_writel(musb->ctrl_base, CORE_INTR_SRC_SET_REG,
+			    MUSB_INTR_VBUSERROR << AM35X_INTR_USB_SHIFT);
+		break;
+	case OTG_STATE_B_IDLE:
+		if (!is_peripheral_enabled(musb))
+			break;
+
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE)
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+		else
+			musb->xceiv->state = OTG_STATE_A_IDLE;
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+	static unsigned long last_timer;
+
+	if (!is_otg_enabled(musb))
+		return;
+
+	if (timeout == 0)
+		timeout = jiffies + msecs_to_jiffies(3);
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || (musb->a_wait_bcon == 0 &&
+				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+		dev_dbg(musb->controller, "%s active, deleting timer\n",
+			otg_state_string(musb->xceiv->state));
+		del_timer(&otg_workaround);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout) && timer_pending(&otg_workaround)) {
+		dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n");
+		return;
+	}
+	last_timer = timeout;
+
+	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
+		otg_state_string(musb->xceiv->state),
+		jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&otg_workaround, timeout);
+}
+#endif
+
+static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
+{
+	struct musb  *musb = hci;
+	void __iomem *reg_base = musb->ctrl_base;
+#ifndef __UBOOT__
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+	struct usb_otg *otg = musb->xceiv->otg;
+#else
+	struct omap_musb_board_data *data =
+		(struct omap_musb_board_data *)musb->controller;
+#endif
+	unsigned long flags;
+	irqreturn_t ret = IRQ_NONE;
+	u32 epintr, usbintr;
+
+#ifdef __UBOOT__
+	/*
+	 * It seems that on AM35X interrupt registers can be updated
+	 * before core registers. This confuses the code.
+	 * As a workaround add a small delay here.
+	 */
+	udelay(10);
+#endif
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* Get endpoint interrupts */
+	epintr = musb_readl(reg_base, EP_INTR_SRC_MASKED_REG);
+
+	if (epintr) {
+		musb_writel(reg_base, EP_INTR_SRC_CLEAR_REG, epintr);
+
+		musb->int_rx =
+			(epintr & AM35X_RX_INTR_MASK) >> AM35X_INTR_RX_SHIFT;
+		musb->int_tx =
+			(epintr & AM35X_TX_INTR_MASK) >> AM35X_INTR_TX_SHIFT;
+	}
+
+	/* Get usb core interrupts */
+	usbintr = musb_readl(reg_base, CORE_INTR_SRC_MASKED_REG);
+	if (!usbintr && !epintr)
+		goto eoi;
+
+	if (usbintr) {
+		musb_writel(reg_base, CORE_INTR_SRC_CLEAR_REG, usbintr);
+
+		musb->int_usb =
+			(usbintr & AM35X_INTR_USB_MASK) >> AM35X_INTR_USB_SHIFT;
+	}
+#ifndef __UBOOT__
+	/*
+	 * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
+	 * AM35x's missing ID change IRQ.  We need an ID change IRQ to
+	 * switch appropriately between halves of the OTG state machine.
+	 * Managing DEVCTL.SESSION per Mentor docs requires that we know its
+	 * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+	 */
+	if (usbintr & (AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT)) {
+		int drvvbus = musb_readl(reg_base, USB_STAT_REG);
+		void __iomem *mregs = musb->mregs;
+		u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
+		int err;
+
+		err = is_host_enabled(musb) && (musb->int_usb &
+						MUSB_INTR_VBUSERROR);
+		if (err) {
+			/*
+			 * The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"-starting sessions
+			 * without waiting for VBUS to stop registering in
+			 * devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (is_host_enabled(musb) && drvvbus) {
+			MUSB_HST_MODE(musb);
+			otg->default_a = 1;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+			del_timer(&otg_workaround);
+		} else {
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			otg->default_a = 0;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
+			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+		}
+
+		/* NOTE: this must complete power-on within 100 ms. */
+		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				otg_state_string(musb->xceiv->state),
+				err ? " ERROR" : "",
+				devctl);
+		ret = IRQ_HANDLED;
+	}
+#endif
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		ret |= musb_interrupt(musb);
+
+eoi:
+	/* EOI needs to be written for the IRQ to be re-asserted. */
+	if (ret == IRQ_HANDLED || epintr || usbintr) {
+		/* clear level interrupt */
+		if (data->clear_irq)
+			data->clear_irq();
+		/* write EOI */
+		musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
+	}
+
+#ifndef __UBOOT__
+	/* Poll for ID change */
+	if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE)
+		mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+#endif
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+#ifndef __UBOOT__
+static int am35x_musb_set_mode(struct musb *musb, u8 musb_mode)
+{
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+	int     retval = 0;
+
+	if (data->set_mode)
+		data->set_mode(musb_mode);
+	else
+		retval = -EIO;
+
+	return retval;
+}
+#endif
+
+static int am35x_musb_init(struct musb *musb)
+{
+#ifndef __UBOOT__
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+#else
+	struct omap_musb_board_data *data =
+		(struct omap_musb_board_data *)musb->controller;
+#endif
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 rev;
+
+	musb->mregs += USB_MENTOR_CORE_OFFSET;
+
+	/* Returns zero if e.g. not clocked */
+	rev = musb_readl(reg_base, USB_REVISION_REG);
+	if (!rev)
+		return -ENODEV;
+
+#ifndef __UBOOT__
+	usb_nop_xceiv_register();
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv))
+		return -ENODEV;
+
+	if (is_host_enabled(musb))
+		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
+#endif
+
+	/* Reset the musb */
+	if (data->reset)
+		data->reset();
+
+	/* Reset the controller */
+	musb_writel(reg_base, USB_CTRL_REG, AM35X_SOFT_RESET_MASK);
+
+	/* Start the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(1);
+
+	msleep(5);
+
+	musb->isr = am35x_musb_interrupt;
+
+	/* clear level interrupt */
+	if (data->clear_irq)
+		data->clear_irq();
+
+	return 0;
+}
+
+static int am35x_musb_exit(struct musb *musb)
+{
+#ifndef __UBOOT__
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+#else
+	struct omap_musb_board_data *data =
+		(struct omap_musb_board_data *)musb->controller;
+#endif
+
+#ifndef __UBOOT__
+	if (is_host_enabled(musb))
+		del_timer_sync(&otg_workaround);
+#endif
+
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
+
+#ifndef __UBOOT__
+	usb_put_phy(musb->xceiv);
+	usb_nop_xceiv_unregister();
+#endif
+
+	return 0;
+}
+
+/* AM35x supports only 32bit read operation */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	void __iomem *fifo = hw_ep->fifo;
+	u32		val;
+	int		i;
+
+	/* Read for 32bit-aligned destination address */
+	if (likely((0x03 & (unsigned long) dst) == 0) && len >= 4) {
+		readsl(fifo, dst, len >> 2);
+		dst += len & ~0x03;
+		len &= 0x03;
+	}
+	/*
+	 * Now read the remaining 1 to 3 byte or complete length if
+	 * unaligned address.
+	 */
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			*(u32 *) dst = musb_readl(fifo, 0);
+			dst += 4;
+		}
+		len &= 0x03;
+	}
+	if (len > 0) {
+		val = musb_readl(fifo, 0);
+		memcpy(dst, &val, len);
+	}
+}
+
+#ifndef __UBOOT__
+static const struct musb_platform_ops am35x_ops = {
+#else
+const struct musb_platform_ops am35x_ops = {
+#endif
+	.init		= am35x_musb_init,
+	.exit		= am35x_musb_exit,
+
+	.enable		= am35x_musb_enable,
+	.disable	= am35x_musb_disable,
+
+#ifndef __UBOOT__
+	.set_mode	= am35x_musb_set_mode,
+	.try_idle	= am35x_musb_try_idle,
+
+	.set_vbus	= am35x_musb_set_vbus,
+#endif
+};
+
+#ifndef __UBOOT__
+static u64 am35x_dmamask = DMA_BIT_MASK(32);
+
+static int __devinit am35x_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct am35x_glue		*glue;
+
+	struct clk			*phy_clk;
+	struct clk			*clk;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	phy_clk = clk_get(&pdev->dev, "fck");
+	if (IS_ERR(phy_clk)) {
+		dev_err(&pdev->dev, "failed to get PHY clock\n");
+		ret = PTR_ERR(phy_clk);
+		goto err2;
+	}
+
+	clk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err3;
+	}
+
+	ret = clk_enable(phy_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable PHY clock\n");
+		goto err4;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err5;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &am35x_dmamask;
+	musb->dev.coherent_dma_mask	= am35x_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->phy_clk			= phy_clk;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &am35x_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err6;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err6;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err6;
+	}
+
+	return 0;
+
+err6:
+	clk_disable(clk);
+
+err5:
+	clk_disable(phy_clk);
+
+err4:
+	clk_put(clk);
+
+err3:
+	clk_put(phy_clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __devexit am35x_remove(struct platform_device *pdev)
+{
+	struct am35x_glue	*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_disable(glue->phy_clk);
+	clk_put(glue->clk);
+	clk_put(glue->phy_clk);
+	kfree(glue);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int am35x_suspend(struct device *dev)
+{
+	struct am35x_glue	*glue = dev_get_drvdata(dev);
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
+
+	clk_disable(glue->phy_clk);
+	clk_disable(glue->clk);
+
+	return 0;
+}
+
+static int am35x_resume(struct device *dev)
+{
+	struct am35x_glue	*glue = dev_get_drvdata(dev);
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+	int			ret;
+
+	/* Start the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(1);
+
+	ret = clk_enable(glue->phy_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable PHY clock\n");
+		return ret;
+	}
+
+	ret = clk_enable(glue->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct dev_pm_ops am35x_pm_ops = {
+	.suspend	= am35x_suspend,
+	.resume		= am35x_resume,
+};
+
+#define DEV_PM_OPS	&am35x_pm_ops
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver am35x_driver = {
+	.probe		= am35x_probe,
+	.remove		= __devexit_p(am35x_remove),
+	.driver		= {
+		.name	= "musb-am35x",
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+MODULE_DESCRIPTION("AM35x MUSB Glue Layer");
+MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init am35x_init(void)
+{
+	return platform_driver_register(&am35x_driver);
+}
+module_init(am35x_init);
+
+static void __exit am35x_exit(void)
+{
+	platform_driver_unregister(&am35x_driver);
+}
+module_exit(am35x_exit);
+#endif
diff --git a/drivers/usb/musb-new/linux-compat.h b/drivers/usb/musb-new/linux-compat.h
new file mode 100644
index 0000000..5c126ef
--- /dev/null
+++ b/drivers/usb/musb-new/linux-compat.h
@@ -0,0 +1,116 @@
+#ifndef __LINUX_COMPAT_H__
+#define __LINUX_COMPAT_H__
+
+#include <malloc.h>
+#include <linux/list.h>
+#include <linux/compat.h>
+
+#define __init
+#define __devinit
+#define __devinitdata
+#define __devinitconst
+#define __iomem
+#define __deprecated
+
+typedef enum { false = 0, true = 1 } bool;
+
+struct unused {};
+typedef struct unused unused_t;
+
+typedef int irqreturn_t;
+typedef unused_t spinlock_t;
+
+struct work_struct {};
+
+struct timer_list {};
+struct notifier_block {};
+
+typedef unsigned long dmaaddr_t;
+
+#define spin_lock_init(lock) do {} while (0)
+#define spin_lock(lock) do {} while (0)
+#define spin_unlock(lock) do {} while (0)
+#define spin_lock_irqsave(lock, flags) do {} while (0)
+#define spin_unlock_irqrestore(lock, flags) do {} while (0)
+
+#define setup_timer(timer, func, data) do {} while (0)
+#define del_timer_sync(timer) do {} while (0)
+#define schedule_work(work) do {} while (0)
+#define INIT_WORK(work, fun) do {} while (0)
+
+#define cpu_relax() do {} while (0)
+
+#define pr_debug(fmt, args...) debug(fmt, ##args)
+#define dev_dbg(dev, fmt, args...)		\
+	debug(fmt, ##args)
+#define dev_vdbg(dev, fmt, args...)		\
+	debug(fmt, ##args)
+#define dev_info(dev, fmt, args...)		\
+	printf(fmt, ##args)
+#define dev_err(dev, fmt, args...)		\
+	printf(fmt, ##args)
+#define printk printf
+
+#define WARN(condition, fmt, args...) ({	\
+	int ret_warn = !!condition;		\
+	if (ret_warn)				\
+		printf(fmt, ##args);		\
+	ret_warn; })
+
+#define KERN_DEBUG
+#define KERN_NOTICE
+#define KERN_WARNING
+#define KERN_ERR
+
+#define kfree(ptr) free(ptr)
+
+#define pm_runtime_get_sync(dev) do {} while (0)
+#define pm_runtime_put(dev) do {} while (0)
+#define pm_runtime_put_sync(dev) do {} while (0)
+#define pm_runtime_use_autosuspend(dev) do {} while (0)
+#define pm_runtime_set_autosuspend_delay(dev, delay) do {} while (0)
+#define pm_runtime_enable(dev) do {} while (0)
+
+#define MODULE_DESCRIPTION(desc)
+#define MODULE_AUTHOR(author)
+#define MODULE_LICENSE(license)
+#define MODULE_ALIAS(alias)
+#define module_param(name, type, perm)
+#define MODULE_PARM_DESC(name, desc)
+#define EXPORT_SYMBOL_GPL(name)
+
+#define writesl(a, d, s) __raw_writesl((unsigned long)a, d, s)
+#define readsl(a, d, s) __raw_readsl((unsigned long)a, d, s)
+#define writesw(a, d, s) __raw_writesw((unsigned long)a, d, s)
+#define readsw(a, d, s) __raw_readsw((unsigned long)a, d, s)
+#define writesb(a, d, s) __raw_writesb((unsigned long)a, d, s)
+#define readsb(a, d, s) __raw_readsb((unsigned long)a, d, s)
+
+#define IRQ_NONE 0
+#define IRQ_HANDLED 0
+
+#define dev_set_drvdata(dev, data) do {} while (0)
+
+#define disable_irq_wake(irq) do {} while (0)
+#define enable_irq_wake(irq) -EINVAL
+#define free_irq(irq, data) do {} while (0)
+#define request_irq(nr, f, flags, nm, data) 0
+
+#define device_init_wakeup(dev, a) do {} while (0)
+
+#define platform_data device_data
+
+#ifndef wmb
+#define wmb()			asm volatile (""   : : : "memory")
+#endif
+
+#define msleep(a)	udelay(a * 1000)
+
+/*
+ * Map U-Boot config options to Linux ones
+ */
+#ifdef CONFIG_OMAP34XX
+#define CONFIG_SOC_OMAP3430
+#endif
+
+#endif /* __LINUX_COMPAT_H__ */
diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c
new file mode 100644
index 0000000..040a5c0
--- /dev/null
+++ b/drivers/usb/musb-new/musb_core.c
@@ -0,0 +1,2497 @@
+/*
+ * MUSB OTG driver core code
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
+ *
+ * This consists of a Host Controller Driver (HCD) and a peripheral
+ * controller driver implementing the "Gadget" API; OTG support is
+ * in the works.  These are normal Linux-USB controller drivers which
+ * use IRQs and have no dedicated thread.
+ *
+ * This version of the driver has only been used with products from
+ * Texas Instruments.  Those products integrate the Inventra logic
+ * with other DMA, IRQ, and bus modules, as well as other logic that
+ * needs to be reflected in this driver.
+ *
+ *
+ * NOTE:  the original Mentor code here was pretty much a collection
+ * of mechanisms that don't seem to have been fully integrated/working
+ * for *any* Linux kernel version.  This version aims at Linux 2.6.now,
+ * Key open issues include:
+ *
+ *  - Lack of host-side transaction scheduling, for all transfer types.
+ *    The hardware doesn't do it; instead, software must.
+ *
+ *    This is not an issue for OTG devices that don't support external
+ *    hubs, but for more "normal" USB hosts it's a user issue that the
+ *    "multipoint" support doesn't scale in the expected ways.  That
+ *    includes DaVinci EVM in a common non-OTG mode.
+ *
+ *      * Control and bulk use dedicated endpoints, and there's as
+ *        yet no mechanism to either (a) reclaim the hardware when
+ *        peripherals are NAKing, which gets complicated with bulk
+ *        endpoints, or (b) use more than a single bulk endpoint in
+ *        each direction.
+ *
+ *        RESULT:  one device may be perceived as blocking another one.
+ *
+ *      * Interrupt and isochronous will dynamically allocate endpoint
+ *        hardware, but (a) there's no record keeping for bandwidth;
+ *        (b) in the common case that few endpoints are available, there
+ *        is no mechanism to reuse endpoints to talk to multiple devices.
+ *
+ *        RESULT:  At one extreme, bandwidth can be overcommitted in
+ *        some hardware configurations, no faults will be reported.
+ *        At the other extreme, the bandwidth capabilities which do
+ *        exist tend to be severely undercommitted.  You can't yet hook
+ *        up both a keyboard and a mouse to an external USB hub.
+ */
+
+/*
+ * This gets many kinds of configuration information:
+ *	- Kconfig for everything user-configurable
+ *	- platform_device for addressing, irq, and platform_data
+ *	- platform_data is mostly for board-specific informarion
+ *	  (plus recentrly, SOC or family details)
+ *
+ * Most of the conditional compilation will (someday) vanish.
+ */
+
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/prefetch.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#else
+#include <common.h>
+#include <usb.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+#include <asm/io.h>
+#include "linux-compat.h"
+#include "usb-compat.h"
+#endif
+
+#include "musb_core.h"
+
+#define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
+
+
+#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
+#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
+
+#define MUSB_VERSION "6.0"
+
+#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
+
+#define MUSB_DRIVER_NAME "musb-hdrc"
+const char musb_driver_name[] = MUSB_DRIVER_NAME;
+
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
+
+
+#ifndef __UBOOT__
+/*-------------------------------------------------------------------------*/
+
+static inline struct musb *dev_to_musb(struct device *dev)
+{
+	return dev_get_drvdata(dev);
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef __UBOOT__
+#ifndef CONFIG_BLACKFIN
+static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
+{
+	void __iomem *addr = phy->io_priv;
+	int	i = 0;
+	u8	r;
+	u8	power;
+	int	ret;
+
+	pm_runtime_get_sync(phy->io_dev);
+
+	/* Make sure the transceiver is not in low power mode */
+	power = musb_readb(addr, MUSB_POWER);
+	power &= ~MUSB_POWER_SUSPENDM;
+	musb_writeb(addr, MUSB_POWER, power);
+
+	/* REVISIT: musbhdrc_ulpi_an.pdf recommends setting the
+	 * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
+	 */
+
+	musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
+			MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
+
+	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
+				& MUSB_ULPI_REG_CMPLT)) {
+		i++;
+		if (i == 10000) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+
+	}
+	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
+	r &= ~MUSB_ULPI_REG_CMPLT;
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
+
+	ret = musb_readb(addr, MUSB_ULPI_REG_DATA);
+
+out:
+	pm_runtime_put(phy->io_dev);
+
+	return ret;
+}
+
+static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
+{
+	void __iomem *addr = phy->io_priv;
+	int	i = 0;
+	u8	r = 0;
+	u8	power;
+	int	ret = 0;
+
+	pm_runtime_get_sync(phy->io_dev);
+
+	/* Make sure the transceiver is not in low power mode */
+	power = musb_readb(addr, MUSB_POWER);
+	power &= ~MUSB_POWER_SUSPENDM;
+	musb_writeb(addr, MUSB_POWER, power);
+
+	musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
+	musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data);
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
+
+	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
+				& MUSB_ULPI_REG_CMPLT)) {
+		i++;
+		if (i == 10000) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+	}
+
+	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
+	r &= ~MUSB_ULPI_REG_CMPLT;
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
+
+out:
+	pm_runtime_put(phy->io_dev);
+
+	return ret;
+}
+#else
+#define musb_ulpi_read		NULL
+#define musb_ulpi_write		NULL
+#endif
+
+static struct usb_phy_io_ops musb_ulpi_access = {
+	.read = musb_ulpi_read,
+	.write = musb_ulpi_write,
+};
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
+
+/*
+ * Load an endpoint's FIFO
+ */
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
+{
+	struct musb *musb = hw_ep->musb;
+	void __iomem *fifo = hw_ep->fifo;
+
+	prefetch((u8 *)src);
+
+	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
+			'T', hw_ep->epnum, fifo, len, src);
+
+	/* we can't assume unaligned reads work */
+	if (likely((0x01 & (unsigned long) src) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned source address */
+		if ((0x02 & (unsigned long) src) == 0) {
+			if (len >= 4) {
+				writesl(fifo, src + index, len >> 2);
+				index += len & ~0x03;
+			}
+			if (len & 0x02) {
+				musb_writew(fifo, 0, *(u16 *)&src[index]);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				writesw(fifo, src + index, len >> 1);
+				index += len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			musb_writeb(fifo, 0, src[index]);
+	} else  {
+		/* byte aligned */
+		writesb(fifo, src, len);
+	}
+}
+
+#if !defined(CONFIG_USB_MUSB_AM35X)
+/*
+ * Unload an endpoint's FIFO
+ */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	struct musb *musb = hw_ep->musb;
+	void __iomem *fifo = hw_ep->fifo;
+
+	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
+			'R', hw_ep->epnum, fifo, len, dst);
+
+	/* we can't assume unaligned writes work */
+	if (likely((0x01 & (unsigned long) dst) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) dst) == 0) {
+			if (len >= 4) {
+				readsl(fifo, dst, len >> 2);
+				index = len & ~0x03;
+			}
+			if (len & 0x02) {
+				*(u16 *)&dst[index] = musb_readw(fifo, 0);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				readsw(fifo, dst, len >> 1);
+				index = len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			dst[index] = musb_readb(fifo, 0);
+	} else  {
+		/* byte aligned */
+		readsb(fifo, dst, len);
+	}
+}
+#endif
+
+#endif	/* normal PIO */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* for high speed test mode; see USB 2.0 spec 7.1.20 */
+static const u8 musb_test_packet[53] = {
+	/* implicit SYNC then DATA0 to start */
+
+	/* JKJKJKJK x9 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* JJKKJJKK x8 */
+	0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+	/* JJJJKKKK x8 */
+	0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
+	/* JJJJJJJKKKKKKK x8 */
+	0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	/* JJJJJJJK x8 */
+	0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
+	/* JKKKKKKK x10, JK */
+	0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
+
+	/* implicit CRC16 then EOP to end */
+};
+
+void musb_load_testpacket(struct musb *musb)
+{
+	void __iomem	*regs = musb->endpoints[0].regs;
+
+	musb_ep_select(musb->mregs, 0);
+	musb_write_fifo(musb->control_ep,
+			sizeof(musb_test_packet), musb_test_packet);
+	musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
+}
+
+#ifndef __UBOOT__
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Handles OTG hnp timeouts, such as b_ase0_brst
+ */
+void musb_otg_timer_func(unsigned long data)
+{
+	struct musb	*musb = (struct musb *)data;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv->state) {
+	case OTG_STATE_B_WAIT_ACON:
+		dev_dbg(musb->controller, "HNP: b_wait_acon timeout; back to b_peripheral\n");
+		musb_g_disconnect(musb);
+		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_SUSPEND:
+	case OTG_STATE_A_WAIT_BCON:
+		dev_dbg(musb->controller, "HNP: %s timeout\n",
+			otg_state_string(musb->xceiv->state));
+		musb_platform_set_vbus(musb, 0);
+		musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+		break;
+	default:
+		dev_dbg(musb->controller, "HNP: Unhandled mode %s\n",
+			otg_state_string(musb->xceiv->state));
+	}
+	musb->ignore_disconnect = 0;
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+/*
+ * Stops the HNP transition. Caller must take care of locking.
+ */
+void musb_hnp_stop(struct musb *musb)
+{
+	struct usb_hcd	*hcd = musb_to_hcd(musb);
+	void __iomem	*mbase = musb->mregs;
+	u8	reg;
+
+	dev_dbg(musb->controller, "HNP: stop from %s\n", otg_state_string(musb->xceiv->state));
+
+	switch (musb->xceiv->state) {
+	case OTG_STATE_A_PERIPHERAL:
+		musb_g_disconnect(musb);
+		dev_dbg(musb->controller, "HNP: back to %s\n",
+			otg_state_string(musb->xceiv->state));
+		break;
+	case OTG_STATE_B_HOST:
+		dev_dbg(musb->controller, "HNP: Disabling HR\n");
+		hcd->self.is_b_host = 0;
+		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+		MUSB_DEV_MODE(musb);
+		reg = musb_readb(mbase, MUSB_POWER);
+		reg |= MUSB_POWER_SUSPENDM;
+		musb_writeb(mbase, MUSB_POWER, reg);
+		/* REVISIT: Start SESSION_REQUEST here? */
+		break;
+	default:
+		dev_dbg(musb->controller, "HNP: Stopping in unknown state %s\n",
+			otg_state_string(musb->xceiv->state));
+	}
+
+	/*
+	 * When returning to A state after HNP, avoid hub_port_rebounce(),
+	 * which cause occasional OPT A "Did not receive reset after connect"
+	 * errors.
+	 */
+	musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
+}
+#endif
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ * @param power
+ */
+
+static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
+				u8 devctl, u8 power)
+{
+#ifndef __UBOOT__
+	struct usb_otg *otg = musb->xceiv->otg;
+#endif
+	irqreturn_t handled = IRQ_NONE;
+
+	dev_dbg(musb->controller, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
+		int_usb);
+
+#ifndef __UBOOT__
+	/* in host mode, the peripheral may issue remote wakeup.
+	 * in peripheral mode, the host may resume the link.
+	 * spurious RESUME irqs happen too, paired with SUSPEND.
+	 */
+	if (int_usb & MUSB_INTR_RESUME) {
+		handled = IRQ_HANDLED;
+		dev_dbg(musb->controller, "RESUME (%s)\n", otg_state_string(musb->xceiv->state));
+
+		if (devctl & MUSB_DEVCTL_HM) {
+			void __iomem *mbase = musb->mregs;
+
+			switch (musb->xceiv->state) {
+			case OTG_STATE_A_SUSPEND:
+				/* remote wakeup?  later, GetPortStatus
+				 * will stop RESUME signaling
+				 */
+
+				if (power & MUSB_POWER_SUSPENDM) {
+					/* spurious */
+					musb->int_usb &= ~MUSB_INTR_SUSPEND;
+					dev_dbg(musb->controller, "Spurious SUSPENDM\n");
+					break;
+				}
+
+				power &= ~MUSB_POWER_SUSPENDM;
+				musb_writeb(mbase, MUSB_POWER,
+						power | MUSB_POWER_RESUME);
+
+				musb->port1_status |=
+						(USB_PORT_STAT_C_SUSPEND << 16)
+						| MUSB_PORT_STAT_RESUME;
+				musb->rh_timer = jiffies
+						+ msecs_to_jiffies(20);
+
+				musb->xceiv->state = OTG_STATE_A_HOST;
+				musb->is_active = 1;
+				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+				musb->is_active = 1;
+				MUSB_DEV_MODE(musb);
+				break;
+			default:
+				WARNING("bogus %s RESUME (%s)\n",
+					"host",
+					otg_state_string(musb->xceiv->state));
+			}
+		} else {
+			switch (musb->xceiv->state) {
+			case OTG_STATE_A_SUSPEND:
+				/* possibly DISCONNECT is upcoming */
+				musb->xceiv->state = OTG_STATE_A_HOST;
+				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+			case OTG_STATE_B_PERIPHERAL:
+				/* disconnect while suspended?  we may
+				 * not get a disconnect irq...
+				 */
+				if ((devctl & MUSB_DEVCTL_VBUS)
+						!= (3 << MUSB_DEVCTL_VBUS_SHIFT)
+						) {
+					musb->int_usb |= MUSB_INTR_DISCONNECT;
+					musb->int_usb &= ~MUSB_INTR_SUSPEND;
+					break;
+				}
+				musb_g_resume(musb);
+				break;
+			case OTG_STATE_B_IDLE:
+				musb->int_usb &= ~MUSB_INTR_SUSPEND;
+				break;
+			default:
+				WARNING("bogus %s RESUME (%s)\n",
+					"peripheral",
+					otg_state_string(musb->xceiv->state));
+			}
+		}
+	}
+
+	/* see manual for the order of the tests */
+	if (int_usb & MUSB_INTR_SESSREQ) {
+		void __iomem *mbase = musb->mregs;
+
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS
+				&& (devctl & MUSB_DEVCTL_BDEVICE)) {
+			dev_dbg(musb->controller, "SessReq while on B state\n");
+			return IRQ_HANDLED;
+		}
+
+		dev_dbg(musb->controller, "SESSION_REQUEST (%s)\n",
+			otg_state_string(musb->xceiv->state));
+
+		/* IRQ arrives from ID pin sense or (later, if VBUS power
+		 * is removed) SRP.  responses are time critical:
+		 *  - turn on VBUS (with silicon-specific mechanism)
+		 *  - go through A_WAIT_VRISE
+		 *  - ... to A_WAIT_BCON.
+		 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
+		 */
+		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+		musb->ep0_stage = MUSB_EP0_START;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
+		musb_platform_set_vbus(musb, 1);
+
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_VBUSERROR) {
+		int	ignore = 0;
+
+		/* During connection as an A-Device, we may see a short
+		 * current spikes causing voltage drop, because of cable
+		 * and peripheral capacitance combined with vbus draw.
+		 * (So: less common with truly self-powered devices, where
+		 * vbus doesn't act like a power supply.)
+		 *
+		 * Such spikes are short; usually less than ~500 usec, max
+		 * of ~2 msec.  That is, they're not sustained overcurrent
+		 * errors, though they're reported using VBUSERROR irqs.
+		 *
+		 * Workarounds:  (a) hardware: use self powered devices.
+		 * (b) software:  ignore non-repeated VBUS errors.
+		 *
+		 * REVISIT:  do delays from lots of DEBUG_KERNEL checks
+		 * make trouble here, keeping VBUS < 4.4V ?
+		 */
+		switch (musb->xceiv->state) {
+		case OTG_STATE_A_HOST:
+			/* recovery is dicey once we've gotten past the
+			 * initial stages of enumeration, but if VBUS
+			 * stayed ok at the other end of the link, and
+			 * another reset is due (at least for high speed,
+			 * to redo the chirp etc), it might work OK...
+			 */
+		case OTG_STATE_A_WAIT_BCON:
+		case OTG_STATE_A_WAIT_VRISE:
+			if (musb->vbuserr_retry) {
+				void __iomem *mbase = musb->mregs;
+
+				musb->vbuserr_retry--;
+				ignore = 1;
+				devctl |= MUSB_DEVCTL_SESSION;
+				musb_writeb(mbase, MUSB_DEVCTL, devctl);
+			} else {
+				musb->port1_status |=
+					  USB_PORT_STAT_OVERCURRENT
+					| (USB_PORT_STAT_C_OVERCURRENT << 16);
+			}
+			break;
+		default:
+			break;
+		}
+
+		dev_dbg(musb->controller, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
+				otg_state_string(musb->xceiv->state),
+				devctl,
+				({ char *s;
+				switch (devctl & MUSB_DEVCTL_VBUS) {
+				case 0 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<SessEnd"; break;
+				case 1 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<AValid"; break;
+				case 2 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<VBusValid"; break;
+				/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
+				default:
+					s = "VALID"; break;
+				}; s; }),
+				VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
+				musb->port1_status);
+
+		/* go through A_WAIT_VFALL then start a new session */
+		if (!ignore)
+			musb_platform_set_vbus(musb, 0);
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_SUSPEND) {
+		dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x power %02x\n",
+			otg_state_string(musb->xceiv->state), devctl, power);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv->state) {
+		case OTG_STATE_A_PERIPHERAL:
+			/* We also come here if the cable is removed, since
+			 * this silicon doesn't report ID-no-longer-grounded.
+			 *
+			 * We depend on T(a_wait_bcon) to shut us down, and
+			 * hope users don't do anything dicey during this
+			 * undesired detour through A_WAIT_BCON.
+			 */
+			musb_hnp_stop(musb);
+			usb_hcd_resume_root_hub(musb_to_hcd(musb));
+			musb_root_disconnect(musb);
+			musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon
+						? : OTG_TIME_A_WAIT_BCON));
+
+			break;
+		case OTG_STATE_B_IDLE:
+			if (!musb->is_active)
+				break;
+		case OTG_STATE_B_PERIPHERAL:
+			musb_g_suspend(musb);
+			musb->is_active = is_otg_enabled(musb)
+					&& otg->gadget->b_hnp_enable;
+			if (musb->is_active) {
+				musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
+				dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
+				mod_timer(&musb->otg_timer, jiffies
+					+ msecs_to_jiffies(
+							OTG_TIME_B_ASE0_BRST));
+			}
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (musb->a_wait_bcon != 0)
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+		case OTG_STATE_A_HOST:
+			musb->xceiv->state = OTG_STATE_A_SUSPEND;
+			musb->is_active = is_otg_enabled(musb)
+					&& otg->host->b_hnp_enable;
+			break;
+		case OTG_STATE_B_HOST:
+			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
+			dev_dbg(musb->controller, "REVISIT: SUSPEND as B_HOST\n");
+			break;
+		default:
+			/* "should not happen" */
+			musb->is_active = 0;
+			break;
+		}
+	}
+#endif
+
+	if (int_usb & MUSB_INTR_CONNECT) {
+		struct usb_hcd *hcd = musb_to_hcd(musb);
+
+		handled = IRQ_HANDLED;
+		musb->is_active = 1;
+
+		musb->ep0_stage = MUSB_EP0_START;
+
+		/* flush endpoints when transitioning from Device Mode */
+		if (is_peripheral_active(musb)) {
+			/* REVISIT HNP; just force disconnect */
+		}
+		musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask);
+		musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+		musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
+#ifndef __UBOOT__
+		musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
+					|USB_PORT_STAT_HIGH_SPEED
+					|USB_PORT_STAT_ENABLE
+					);
+		musb->port1_status |= USB_PORT_STAT_CONNECTION
+					|(USB_PORT_STAT_C_CONNECTION << 16);
+
+		/* high vs full speed is just a guess until after reset */
+		if (devctl & MUSB_DEVCTL_LSDEV)
+			musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
+
+		/* indicate new connection to OTG machine */
+		switch (musb->xceiv->state) {
+		case OTG_STATE_B_PERIPHERAL:
+			if (int_usb & MUSB_INTR_SUSPEND) {
+				dev_dbg(musb->controller, "HNP: SUSPEND+CONNECT, now b_host\n");
+				int_usb &= ~MUSB_INTR_SUSPEND;
+				goto b_host;
+			} else
+				dev_dbg(musb->controller, "CONNECT as b_peripheral???\n");
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			dev_dbg(musb->controller, "HNP: CONNECT, now b_host\n");
+b_host:
+			musb->xceiv->state = OTG_STATE_B_HOST;
+			hcd->self.is_b_host = 1;
+			musb->ignore_disconnect = 0;
+			del_timer(&musb->otg_timer);
+			break;
+		default:
+			if ((devctl & MUSB_DEVCTL_VBUS)
+					== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
+				musb->xceiv->state = OTG_STATE_A_HOST;
+				hcd->self.is_b_host = 0;
+			}
+			break;
+		}
+
+		/* poke the root hub */
+		MUSB_HST_MODE(musb);
+		if (hcd->status_urb)
+			usb_hcd_poll_rh_status(hcd);
+		else
+			usb_hcd_resume_root_hub(hcd);
+
+		dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n",
+				otg_state_string(musb->xceiv->state), devctl);
+#endif
+	}
+
+#ifndef __UBOOT__
+	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
+		dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
+				otg_state_string(musb->xceiv->state),
+				MUSB_MODE(musb), devctl);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv->state) {
+		case OTG_STATE_A_HOST:
+		case OTG_STATE_A_SUSPEND:
+			usb_hcd_resume_root_hub(musb_to_hcd(musb));
+			musb_root_disconnect(musb);
+			if (musb->a_wait_bcon != 0 && is_otg_enabled(musb))
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+		case OTG_STATE_B_HOST:
+			/* REVISIT this behaves for "real disconnect"
+			 * cases; make sure the other transitions from
+			 * from B_HOST act right too.  The B_HOST code
+			 * in hnp_stop() is currently not used...
+			 */
+			musb_root_disconnect(musb);
+			musb_to_hcd(musb)->self.is_b_host = 0;
+			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+			MUSB_DEV_MODE(musb);
+			musb_g_disconnect(musb);
+			break;
+		case OTG_STATE_A_PERIPHERAL:
+			musb_hnp_stop(musb);
+			musb_root_disconnect(musb);
+			/* FALLTHROUGH */
+		case OTG_STATE_B_WAIT_ACON:
+			/* FALLTHROUGH */
+		case OTG_STATE_B_PERIPHERAL:
+		case OTG_STATE_B_IDLE:
+			musb_g_disconnect(musb);
+			break;
+		default:
+			WARNING("unhandled DISCONNECT transition (%s)\n",
+				otg_state_string(musb->xceiv->state));
+			break;
+		}
+	}
+
+	/* mentor saves a bit: bus reset and babble share the same irq.
+	 * only host sees babble; only peripheral sees bus reset.
+	 */
+	if (int_usb & MUSB_INTR_RESET) {
+		handled = IRQ_HANDLED;
+		if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) {
+			/*
+			 * Looks like non-HS BABBLE can be ignored, but
+			 * HS BABBLE is an error condition. For HS the solution
+			 * is to avoid babble in the first place and fix what
+			 * caused BABBLE. When HS BABBLE happens we can only
+			 * stop the session.
+			 */
+			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
+				dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl);
+			else {
+				ERR("Stopping host session -- babble\n");
+				musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+			}
+		} else if (is_peripheral_capable()) {
+			dev_dbg(musb->controller, "BUS RESET as %s\n",
+				otg_state_string(musb->xceiv->state));
+			switch (musb->xceiv->state) {
+			case OTG_STATE_A_SUSPEND:
+				/* We need to ignore disconnect on suspend
+				 * otherwise tusb 2.0 won't reconnect after a
+				 * power cycle, which breaks otg compliance.
+				 */
+				musb->ignore_disconnect = 1;
+				musb_g_reset(musb);
+				/* FALLTHROUGH */
+			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
+				/* never use invalid T(a_wait_bcon) */
+				dev_dbg(musb->controller, "HNP: in %s, %d msec timeout\n",
+					otg_state_string(musb->xceiv->state),
+					TA_WAIT_BCON(musb));
+				mod_timer(&musb->otg_timer, jiffies
+					+ msecs_to_jiffies(TA_WAIT_BCON(musb)));
+				break;
+			case OTG_STATE_A_PERIPHERAL:
+				musb->ignore_disconnect = 0;
+				del_timer(&musb->otg_timer);
+				musb_g_reset(musb);
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				dev_dbg(musb->controller, "HNP: RESET (%s), to b_peripheral\n",
+					otg_state_string(musb->xceiv->state));
+				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+				musb_g_reset(musb);
+				break;
+			case OTG_STATE_B_IDLE:
+				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+				/* FALLTHROUGH */
+			case OTG_STATE_B_PERIPHERAL:
+				musb_g_reset(musb);
+				break;
+			default:
+				dev_dbg(musb->controller, "Unhandled BUS RESET as %s\n",
+					otg_state_string(musb->xceiv->state));
+			}
+		}
+	}
+#endif
+
+#if 0
+/* REVISIT ... this would be for multiplexing periodic endpoints, or
+ * supporting transfer phasing to prevent exceeding ISO bandwidth
+ * limits of a given frame or microframe.
+ *
+ * It's not needed for peripheral side, which dedicates endpoints;
+ * though it _might_ use SOF irqs for other purposes.
+ *
+ * And it's not currently needed for host side, which also dedicates
+ * endpoints, relies on TX/RX interval registers, and isn't claimed
+ * to support ISO transfers yet.
+ */
+	if (int_usb & MUSB_INTR_SOF) {
+		void __iomem *mbase = musb->mregs;
+		struct musb_hw_ep	*ep;
+		u8 epnum;
+		u16 frame;
+
+		dev_dbg(musb->controller, "START_OF_FRAME\n");
+		handled = IRQ_HANDLED;
+
+		/* start any periodic Tx transfers waiting for current frame */
+		frame = musb_readw(mbase, MUSB_FRAME);
+		ep = musb->endpoints;
+		for (epnum = 1; (epnum < musb->nr_endpoints)
+					&& (musb->epmask >= (1 << epnum));
+				epnum++, ep++) {
+			/*
+			 * FIXME handle framecounter wraps (12 bits)
+			 * eliminate duplicated StartUrb logic
+			 */
+			if (ep->dwWaitFrame >= frame) {
+				ep->dwWaitFrame = 0;
+				pr_debug("SOF --> periodic TX%s on %d\n",
+					ep->tx_channel ? " DMA" : "",
+					epnum);
+				if (!ep->tx_channel)
+					musb_h_tx_start(musb, epnum);
+				else
+					cppi_hostdma_start(musb, epnum);
+			}
+		}		/* end of for loop */
+	}
+#endif
+
+	schedule_work(&musb->irq_work);
+
+	return handled;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+* Program the HDRC to start (enable interrupts, dma, etc.).
+*/
+void musb_start(struct musb *musb)
+{
+	void __iomem	*regs = musb->mregs;
+	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
+
+	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
+
+	/*  Set INT enable registers, enable interrupts */
+	musb_writew(regs, MUSB_INTRTXE, musb->epmask);
+	musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+	musb_writeb(regs, MUSB_TESTMODE, 0);
+
+	/* put into basic highspeed mode and start session */
+	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+						| MUSB_POWER_HSENAB
+						/* ENSUSPEND wedges tusb */
+						/* | MUSB_POWER_ENSUSPEND */
+						);
+
+	musb->is_active = 0;
+	devctl = musb_readb(regs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+
+	if (is_otg_enabled(musb)) {
+#ifndef __UBOOT__
+		/* session started after:
+		 * (a) ID-grounded irq, host mode;
+		 * (b) vbus present/connect IRQ, peripheral mode;
+		 * (c) peripheral initiates, using SRP
+		 */
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->is_active = 1;
+		else
+			devctl |= MUSB_DEVCTL_SESSION;
+#endif
+
+	} else if (is_host_enabled(musb)) {
+		/* assume ID pin is hard-wired to ground */
+		devctl |= MUSB_DEVCTL_SESSION;
+
+	} else /* peripheral is enabled */ {
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->is_active = 1;
+	}
+	musb_platform_enable(musb);
+	musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
+
+
+static void musb_generic_disable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+	u16	temp;
+
+	/* disable interrupts */
+	musb_writeb(mbase, MUSB_INTRUSBE, 0);
+	musb_writew(mbase, MUSB_INTRTXE, 0);
+	musb_writew(mbase, MUSB_INTRRXE, 0);
+
+	/* off */
+	musb_writeb(mbase, MUSB_DEVCTL, 0);
+
+	/*  flush pending interrupts */
+	temp = musb_readb(mbase, MUSB_INTRUSB);
+	temp = musb_readw(mbase, MUSB_INTRTX);
+	temp = musb_readw(mbase, MUSB_INTRRX);
+
+}
+
+/*
+ * Make the HDRC stop (disable interrupts, etc.);
+ * reversible by musb_start
+ * called on gadget driver unregister
+ * with controller locked, irqs blocked
+ * acts as a NOP unless some role activated the hardware
+ */
+void musb_stop(struct musb *musb)
+{
+	/* stop IRQs, timers, ... */
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+	dev_dbg(musb->controller, "HDRC disabled\n");
+
+	/* FIXME
+	 *  - mark host and/or peripheral drivers unusable/inactive
+	 *  - disable DMA (and enable it in HdrcStart)
+	 *  - make sure we can musb_start() after musb_stop(); with
+	 *    OTG mode, gadget driver module rmmod/modprobe cycles that
+	 *  - ...
+	 */
+	musb_platform_try_idle(musb, 0);
+}
+
+#ifndef __UBOOT__
+static void musb_shutdown(struct platform_device *pdev)
+{
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+	unsigned long	flags;
+
+	pm_runtime_get_sync(musb->controller);
+
+	musb_gadget_cleanup(musb);
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (!is_otg_enabled(musb) && is_host_enabled(musb))
+		usb_remove_hcd(musb_to_hcd(musb));
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_platform_exit(musb);
+
+	pm_runtime_put(musb->controller);
+	/* FIXME power down */
+}
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The silicon either has hard-wired endpoint configurations, or else
+ * "dynamic fifo" sizing.  The driver has support for both, though at this
+ * writing only the dynamic sizing is very well tested.   Since we switched
+ * away from compile-time hardware parameters, we can no longer rely on
+ * dead code elimination to leave only the relevant one in the object file.
+ *
+ * We don't currently use dynamic fifo setup capability to do anything
+ * more than selecting one of a bunch of predefined configurations.
+ */
+#if defined(CONFIG_USB_MUSB_TUSB6010)			\
+	|| defined(CONFIG_USB_MUSB_TUSB6010_MODULE)	\
+	|| defined(CONFIG_USB_MUSB_OMAP2PLUS)		\
+	|| defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)	\
+	|| defined(CONFIG_USB_MUSB_AM35X)		\
+	|| defined(CONFIG_USB_MUSB_AM35X_MODULE)	\
+	|| defined(CONFIG_USB_MUSB_DSPS)		\
+	|| defined(CONFIG_USB_MUSB_DSPS_MODULE)
+static ushort __devinitdata fifo_mode = 4;
+#elif defined(CONFIG_USB_MUSB_UX500)			\
+	|| defined(CONFIG_USB_MUSB_UX500_MODULE)
+static ushort __devinitdata fifo_mode = 5;
+#else
+static ushort __devinitdata fifo_mode = 2;
+#endif
+
+/* "modprobe ... fifo_mode=1" etc */
+module_param(fifo_mode, ushort, 0);
+MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
+
+/*
+ * tables defining fifo_mode values.  define more if you like.
+ * for host side, make sure both halves of ep1 are set up.
+ */
+
+/* mode 0 - fits in 2KB */
+static struct musb_fifo_cfg __devinitdata mode_0_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 1 - fits in 4KB */
+static struct musb_fifo_cfg __devinitdata mode_1_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 2 - fits in 4KB */
+static struct musb_fifo_cfg __devinitdata mode_2_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 3 - fits in 4KB */
+static struct musb_fifo_cfg __devinitdata mode_3_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 4 - fits in 16KB */
+static struct musb_fifo_cfg __devinitdata mode_4_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 256, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 64, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 256, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 64, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 256, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 64, },
+{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
+
+/* mode 5 - fits in 8KB */
+static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 32, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 32, },
+{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
+
+/*
+ * configure a fifo; for non-shared endpoints, this may be called
+ * once for a tx fifo and once for an rx fifo.
+ *
+ * returns negative errno or offset for next fifo.
+ */
+static int __devinit
+fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
+		const struct musb_fifo_cfg *cfg, u16 offset)
+{
+	void __iomem	*mbase = musb->mregs;
+	int	size = 0;
+	u16	maxpacket = cfg->maxpacket;
+	u16	c_off = offset >> 3;
+	u8	c_size;
+
+	/* expect hw_ep has already been zero-initialized */
+
+	size = ffs(max(maxpacket, (u16) 8)) - 1;
+	maxpacket = 1 << size;
+
+	c_size = size - 3;
+	if (cfg->mode == BUF_DOUBLE) {
+		if ((offset + (maxpacket << 1)) >
+				(1 << (musb->config->ram_bits + 2)))
+			return -EMSGSIZE;
+		c_size |= MUSB_FIFOSZ_DPB;
+	} else {
+		if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
+			return -EMSGSIZE;
+	}
+
+	/* configure the FIFO */
+	musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
+
+	/* EP0 reserved endpoint for control, bidirectional;
+	 * EP1 reserved for bulk, two unidirection halves.
+	 */
+	if (hw_ep->epnum == 1)
+		musb->bulk_ep = hw_ep;
+	/* REVISIT error check:  be sure ep0 can both rx and tx ... */
+	switch (cfg->style) {
+	case FIFO_TX:
+		musb_write_txfifosz(mbase, c_size);
+		musb_write_txfifoadd(mbase, c_off);
+		hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_tx = maxpacket;
+		break;
+	case FIFO_RX:
+		musb_write_rxfifosz(mbase, c_size);
+		musb_write_rxfifoadd(mbase, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+		break;
+	case FIFO_RXTX:
+		musb_write_txfifosz(mbase, c_size);
+		musb_write_txfifoadd(mbase, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+
+		musb_write_rxfifosz(mbase, c_size);
+		musb_write_rxfifoadd(mbase, c_off);
+		hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
+		hw_ep->max_packet_sz_tx = maxpacket;
+
+		hw_ep->is_shared_fifo = true;
+		break;
+	}
+
+	/* NOTE rx and tx endpoint irqs aren't managed separately,
+	 * which happens to be ok
+	 */
+	musb->epmask |= (1 << hw_ep->epnum);
+
+	return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
+}
+
+static struct musb_fifo_cfg __devinitdata ep0_cfg = {
+	.style = FIFO_RXTX, .maxpacket = 64,
+};
+
+static int __devinit ep_config_from_table(struct musb *musb)
+{
+	const struct musb_fifo_cfg	*cfg;
+	unsigned		i, n;
+	int			offset;
+	struct musb_hw_ep	*hw_ep = musb->endpoints;
+
+	if (musb->config->fifo_cfg) {
+		cfg = musb->config->fifo_cfg;
+		n = musb->config->fifo_cfg_size;
+		goto done;
+	}
+
+	switch (fifo_mode) {
+	default:
+		fifo_mode = 0;
+		/* FALLTHROUGH */
+	case 0:
+		cfg = mode_0_cfg;
+		n = ARRAY_SIZE(mode_0_cfg);
+		break;
+	case 1:
+		cfg = mode_1_cfg;
+		n = ARRAY_SIZE(mode_1_cfg);
+		break;
+	case 2:
+		cfg = mode_2_cfg;
+		n = ARRAY_SIZE(mode_2_cfg);
+		break;
+	case 3:
+		cfg = mode_3_cfg;
+		n = ARRAY_SIZE(mode_3_cfg);
+		break;
+	case 4:
+		cfg = mode_4_cfg;
+		n = ARRAY_SIZE(mode_4_cfg);
+		break;
+	case 5:
+		cfg = mode_5_cfg;
+		n = ARRAY_SIZE(mode_5_cfg);
+		break;
+	}
+
+	printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
+			musb_driver_name, fifo_mode);
+
+
+done:
+	offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
+	/* assert(offset > 0) */
+
+	/* NOTE:  for RTL versions >= 1.400 EPINFO and RAMINFO would
+	 * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
+	 */
+
+	for (i = 0; i < n; i++) {
+		u8	epn = cfg->hw_ep_num;
+
+		if (epn >= musb->config->num_eps) {
+			pr_debug("%s: invalid ep %d\n",
+					musb_driver_name, epn);
+			return -EINVAL;
+		}
+		offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
+		if (offset < 0) {
+			pr_debug("%s: mem overrun, ep %d\n",
+					musb_driver_name, epn);
+			return -EINVAL;
+		}
+		epn++;
+		musb->nr_endpoints = max(epn, musb->nr_endpoints);
+	}
+
+	printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
+			musb_driver_name,
+			n + 1, musb->config->num_eps * 2 - 1,
+			offset, (1 << (musb->config->ram_bits + 2)));
+
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+/*
+ * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
+ * @param musb the controller
+ */
+static int __devinit ep_config_from_hw(struct musb *musb)
+{
+	u8 epnum = 0;
+	struct musb_hw_ep *hw_ep;
+	void *mbase = musb->mregs;
+	int ret = 0;
+
+	dev_dbg(musb->controller, "<== static silicon ep config\n");
+
+	/* FIXME pick up ep0 maxpacket size */
+
+	for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
+		musb_ep_select(mbase, epnum);
+		hw_ep = musb->endpoints + epnum;
+
+		ret = musb_read_fifosize(musb, hw_ep, epnum);
+		if (ret < 0)
+			break;
+
+		/* FIXME set up hw_ep->{rx,tx}_double_buffered */
+
+		/* pick an RX/TX endpoint for bulk */
+		if (hw_ep->max_packet_sz_tx < 512
+				|| hw_ep->max_packet_sz_rx < 512)
+			continue;
+
+		/* REVISIT:  this algorithm is lazy, we should at least
+		 * try to pick a double buffered endpoint.
+		 */
+		if (musb->bulk_ep)
+			continue;
+		musb->bulk_ep = hw_ep;
+	}
+
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
+
+/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
+ * configure endpoints, or take their config from silicon
+ */
+static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
+{
+	u8 reg;
+	char *type;
+	char aInfo[90], aRevision[32], aDate[12];
+	void __iomem	*mbase = musb->mregs;
+	int		status = 0;
+	int		i;
+
+	/* log core options (read using indexed model) */
+	reg = musb_read_configdata(mbase);
+
+	strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
+	if (reg & MUSB_CONFIGDATA_DYNFIFO) {
+		strcat(aInfo, ", dyn FIFOs");
+		musb->dyn_fifo = true;
+	}
+	if (reg & MUSB_CONFIGDATA_MPRXE) {
+		strcat(aInfo, ", bulk combine");
+		musb->bulk_combine = true;
+	}
+	if (reg & MUSB_CONFIGDATA_MPTXE) {
+		strcat(aInfo, ", bulk split");
+		musb->bulk_split = true;
+	}
+	if (reg & MUSB_CONFIGDATA_HBRXE) {
+		strcat(aInfo, ", HB-ISO Rx");
+		musb->hb_iso_rx = true;
+	}
+	if (reg & MUSB_CONFIGDATA_HBTXE) {
+		strcat(aInfo, ", HB-ISO Tx");
+		musb->hb_iso_tx = true;
+	}
+	if (reg & MUSB_CONFIGDATA_SOFTCONE)
+		strcat(aInfo, ", SoftConn");
+
+	printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n",
+			musb_driver_name, reg, aInfo);
+
+	aDate[0] = 0;
+	if (MUSB_CONTROLLER_MHDRC == musb_type) {
+		musb->is_multipoint = 1;
+		type = "M";
+	} else {
+		musb->is_multipoint = 0;
+		type = "";
+#ifndef	CONFIG_USB_OTG_BLACKLIST_HUB
+		printk(KERN_ERR
+			"%s: kernel must blacklist external hubs\n",
+			musb_driver_name);
+#endif
+	}
+
+	/* log release info */
+	musb->hwvers = musb_read_hwvers(mbase);
+	snprintf(aRevision, 32, "%d.%d%s", MUSB_HWVERS_MAJOR(musb->hwvers),
+		MUSB_HWVERS_MINOR(musb->hwvers),
+		(musb->hwvers & MUSB_HWVERS_RC) ? "RC" : "");
+	printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n",
+			musb_driver_name, type, aRevision, aDate);
+
+	/* configure ep0 */
+	musb_configure_ep0(musb);
+
+	/* discover endpoint configuration */
+	musb->nr_endpoints = 1;
+	musb->epmask = 1;
+
+	if (musb->dyn_fifo)
+		status = ep_config_from_table(musb);
+	else
+		status = ep_config_from_hw(musb);
+
+	if (status < 0)
+		return status;
+
+	/* finish init, and print endpoint config */
+	for (i = 0; i < musb->nr_endpoints; i++) {
+		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
+
+		hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
+#if defined(CONFIG_USB_MUSB_TUSB6010) || defined (CONFIG_USB_MUSB_TUSB6010_MODULE)
+		hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
+		hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
+		hw_ep->fifo_sync_va =
+			musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i);
+
+		if (i == 0)
+			hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
+		else
+			hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2);
+#endif
+
+		hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
+		hw_ep->target_regs = musb_read_target_reg_base(i, mbase);
+		hw_ep->rx_reinit = 1;
+		hw_ep->tx_reinit = 1;
+
+		if (hw_ep->max_packet_sz_tx) {
+			dev_dbg(musb->controller,
+				"%s: hw_ep %d%s, %smax %d\n",
+				musb_driver_name, i,
+				hw_ep->is_shared_fifo ? "shared" : "tx",
+				hw_ep->tx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_tx);
+		}
+		if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
+			dev_dbg(musb->controller,
+				"%s: hw_ep %d%s, %smax %d\n",
+				musb_driver_name, i,
+				"rx",
+				hw_ep->rx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_rx);
+		}
+		if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
+			dev_dbg(musb->controller, "hw_ep %d not configured\n", i);
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
+	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500)
+
+static irqreturn_t generic_interrupt(int irq, void *__hci)
+{
+	unsigned long	flags;
+	irqreturn_t	retval = IRQ_NONE;
+	struct musb	*musb = __hci;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx)
+		retval = musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return retval;
+}
+
+#else
+#define generic_interrupt	NULL
+#endif
+
+/*
+ * handle all the irqs defined by the HDRC core. for now we expect:  other
+ * irq sources (phy, dma, etc) will be handled first, musb->int_* values
+ * will be assigned, and the irq will already have been acked.
+ *
+ * called in irq context with spinlock held, irqs blocked
+ */
+irqreturn_t musb_interrupt(struct musb *musb)
+{
+	irqreturn_t	retval = IRQ_NONE;
+	u8		devctl, power;
+	int		ep_num;
+	u32		reg;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	power = musb_readb(musb->mregs, MUSB_POWER);
+
+	dev_dbg(musb->controller, "** IRQ %s usb%04x tx%04x rx%04x\n",
+		(devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
+		musb->int_usb, musb->int_tx, musb->int_rx);
+
+	/* the core can interrupt us for multiple reasons; docs have
+	 * a generic interrupt flowchart to follow
+	 */
+	if (musb->int_usb)
+		retval |= musb_stage0_irq(musb, musb->int_usb,
+				devctl, power);
+
+	/* "stage 1" is handling endpoint irqs */
+
+	/* handle endpoint 0 first */
+	if (musb->int_tx & 1) {
+		if (devctl & MUSB_DEVCTL_HM) {
+			if (is_host_capable())
+				retval |= musb_h_ep0_irq(musb);
+		} else {
+			if (is_peripheral_capable())
+				retval |= musb_g_ep0_irq(musb);
+		}
+	}
+
+	/* RX on endpoints 1-15 */
+	reg = musb->int_rx >> 1;
+	ep_num = 1;
+	while (reg) {
+		if (reg & 1) {
+			/* musb_ep_select(musb->mregs, ep_num); */
+			/* REVISIT just retval = ep->rx_irq(...) */
+			retval = IRQ_HANDLED;
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_rx(musb, ep_num);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_rx(musb, ep_num);
+			}
+		}
+
+		reg >>= 1;
+		ep_num++;
+	}
+
+	/* TX on endpoints 1-15 */
+	reg = musb->int_tx >> 1;
+	ep_num = 1;
+	while (reg) {
+		if (reg & 1) {
+			/* musb_ep_select(musb->mregs, ep_num); */
+			/* REVISIT just retval |= ep->tx_irq(...) */
+			retval = IRQ_HANDLED;
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_tx(musb, ep_num);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_tx(musb, ep_num);
+			}
+		}
+		reg >>= 1;
+		ep_num++;
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(musb_interrupt);
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static bool __devinitdata use_dma = 1;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+
+void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
+{
+	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	/* called with controller lock already held */
+
+	if (!epnum) {
+#ifndef CONFIG_USB_TUSB_OMAP_DMA
+		if (!is_cppi_enabled()) {
+			/* endpoint 0 */
+			if (devctl & MUSB_DEVCTL_HM)
+				musb_h_ep0_irq(musb);
+			else
+				musb_g_ep0_irq(musb);
+		}
+#endif
+	} else {
+		/* endpoints 1..15 */
+		if (transmit) {
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_tx(musb, epnum);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_tx(musb, epnum);
+			}
+		} else {
+			/* receive */
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_rx(musb, epnum);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_rx(musb, epnum);
+			}
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(musb_dma_completion);
+
+#else
+#define use_dma			0
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_SYSFS
+
+static ssize_t
+musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = sprintf(buf, "%s\n", otg_state_string(musb->xceiv->state));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static ssize_t
+musb_mode_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	int		status;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	if (sysfs_streq(buf, "host"))
+		status = musb_platform_set_mode(musb, MUSB_HOST);
+	else if (sysfs_streq(buf, "peripheral"))
+		status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
+	else if (sysfs_streq(buf, "otg"))
+		status = musb_platform_set_mode(musb, MUSB_OTG);
+	else
+		status = -EINVAL;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return (status == 0) ? n : status;
+}
+static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store);
+
+static ssize_t
+musb_vbus_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+
+	if (sscanf(buf, "%lu", &val) < 1) {
+		dev_err(dev, "Invalid VBUS timeout ms value\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+	/* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
+	musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
+	if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON)
+		musb->is_active = 0;
+	musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return n;
+}
+
+static ssize_t
+musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+	int		vbus;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	val = musb->a_wait_bcon;
+	/* FIXME get_vbus_status() is normally #defined as false...
+	 * and is effectively TUSB-specific.
+	 */
+	vbus = musb_platform_get_vbus_status(musb);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return sprintf(buf, "Vbus %s, timeout %lu msec\n",
+			vbus ? "on" : "off", val);
+}
+static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
+
+/* Gadget drivers can't know that a host is connected so they might want
+ * to start SRP, but users can.  This allows userspace to trigger SRP.
+ */
+static ssize_t
+musb_srp_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned short	srp;
+
+	if (sscanf(buf, "%hu", &srp) != 1
+			|| (srp != 1)) {
+		dev_err(dev, "SRP: Value must be 1\n");
+		return -EINVAL;
+	}
+
+	if (srp == 1)
+		musb_g_wakeup(musb);
+
+	return n;
+}
+static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store);
+
+static struct attribute *musb_attributes[] = {
+	&dev_attr_mode.attr,
+	&dev_attr_vbus.attr,
+	&dev_attr_srp.attr,
+	NULL
+};
+
+static const struct attribute_group musb_attr_group = {
+	.attrs = musb_attributes,
+};
+
+#endif	/* sysfs */
+
+#ifndef __UBOOT__
+/* Only used to provide driver mode change events */
+static void musb_irq_work(struct work_struct *data)
+{
+	struct musb *musb = container_of(data, struct musb, irq_work);
+	static int old_state;
+
+	if (musb->xceiv->state != old_state) {
+		old_state = musb->xceiv->state;
+		sysfs_notify(&musb->controller->kobj, NULL, "mode");
+	}
+}
+#endif
+
+/* --------------------------------------------------------------------------
+ * Init support
+ */
+
+static struct musb *__devinit
+allocate_instance(struct device *dev,
+		struct musb_hdrc_config *config, void __iomem *mbase)
+{
+	struct musb		*musb;
+	struct musb_hw_ep	*ep;
+	int			epnum;
+#ifndef __UBOOT__
+	struct usb_hcd	*hcd;
+
+	hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev));
+	if (!hcd)
+		return NULL;
+	/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
+
+	musb = hcd_to_musb(hcd);
+#else
+	musb = calloc(1, sizeof(*musb));
+	if (!musb)
+		return NULL;
+#endif
+	INIT_LIST_HEAD(&musb->control);
+	INIT_LIST_HEAD(&musb->in_bulk);
+	INIT_LIST_HEAD(&musb->out_bulk);
+
+#ifndef __UBOOT__
+	hcd->uses_new_polling = 1;
+	hcd->has_tt = 1;
+#endif
+
+	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+	musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
+	dev_set_drvdata(dev, musb);
+	musb->mregs = mbase;
+	musb->ctrl_base = mbase;
+	musb->nIrq = -ENODEV;
+	musb->config = config;
+	BUG_ON(musb->config->num_eps > MUSB_C_NUM_EPS);
+	for (epnum = 0, ep = musb->endpoints;
+			epnum < musb->config->num_eps;
+			epnum++, ep++) {
+		ep->musb = musb;
+		ep->epnum = epnum;
+	}
+
+	musb->controller = dev;
+
+	return musb;
+}
+
+static void musb_free(struct musb *musb)
+{
+	/* this has multiple entry modes. it handles fault cleanup after
+	 * probe(), where things may be partially set up, as well as rmmod
+	 * cleanup after everything's been de-activated.
+	 */
+
+#ifdef CONFIG_SYSFS
+	sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
+#endif
+
+	if (musb->nIrq >= 0) {
+		if (musb->irq_wake)
+			disable_irq_wake(musb->nIrq);
+		free_irq(musb->nIrq, musb);
+	}
+	if (is_dma_capable() && musb->dma_controller) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		(void) c->stop(c);
+		dma_controller_destroy(c);
+	}
+
+	kfree(musb);
+}
+
+/*
+ * Perform generic per-controller initialization.
+ *
+ * @pDevice: the controller (already clocked, etc)
+ * @nIrq: irq
+ * @mregs: virtual address of controller registers,
+ *	not yet corrected for platform-specific offsets
+ */
+#ifndef __UBOOT__
+static int __devinit
+musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
+#else
+struct musb *
+musb_init_controller(struct musb_hdrc_platform_data *plat, struct device *dev,
+			     void *ctrl)
+#endif
+{
+	int			status;
+	struct musb		*musb;
+#ifndef __UBOOT__
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+#else
+	int nIrq = 0;
+#endif
+
+	/* The driver might handle more features than the board; OK.
+	 * Fail when the board needs a feature that's not enabled.
+	 */
+	if (!plat) {
+		dev_dbg(dev, "no platform_data?\n");
+		status = -ENODEV;
+		goto fail0;
+	}
+
+	/* allocate */
+	musb = allocate_instance(dev, plat->config, ctrl);
+	if (!musb) {
+		status = -ENOMEM;
+		goto fail0;
+	}
+
+	pm_runtime_use_autosuspend(musb->controller);
+	pm_runtime_set_autosuspend_delay(musb->controller, 200);
+	pm_runtime_enable(musb->controller);
+
+	spin_lock_init(&musb->lock);
+	musb->board_mode = plat->mode;
+	musb->board_set_power = plat->set_power;
+	musb->min_power = plat->min_power;
+	musb->ops = plat->platform_ops;
+
+	/* The musb_platform_init() call:
+	 *   - adjusts musb->mregs and musb->isr if needed,
+	 *   - may initialize an integrated tranceiver
+	 *   - initializes musb->xceiv, usually by otg_get_phy()
+	 *   - stops powering VBUS
+	 *
+	 * There are various transceiver configurations.  Blackfin,
+	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
+	 * external/discrete ones in various flavors (twl4030 family,
+	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
+	 */
+	musb->isr = generic_interrupt;
+	status = musb_platform_init(musb);
+	if (status < 0)
+		goto fail1;
+
+	if (!musb->isr) {
+		status = -ENODEV;
+		goto fail2;
+	}
+
+#ifndef __UBOOT__
+	if (!musb->xceiv->io_ops) {
+		musb->xceiv->io_dev = musb->controller;
+		musb->xceiv->io_priv = musb->mregs;
+		musb->xceiv->io_ops = &musb_ulpi_access;
+	}
+#endif
+
+	pm_runtime_get_sync(musb->controller);
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	if (use_dma && dev->dma_mask) {
+		struct dma_controller	*c;
+
+		c = dma_controller_create(musb, musb->mregs);
+		musb->dma_controller = c;
+		if (c)
+			(void) c->start(c);
+	}
+#endif
+#ifndef __UBOOT__
+	/* ideally this would be abstracted in platform setup */
+	if (!is_dma_capable() || !musb->dma_controller)
+		dev->dma_mask = NULL;
+#endif
+
+	/* be sure interrupts are disabled before connecting ISR */
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+
+	/* setup musb parts of the core (especially endpoints) */
+	status = musb_core_init(plat->config->multipoint
+			? MUSB_CONTROLLER_MHDRC
+			: MUSB_CONTROLLER_HDRC, musb);
+	if (status < 0)
+		goto fail3;
+
+	setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
+
+	/* Init IRQ workqueue before request_irq */
+	INIT_WORK(&musb->irq_work, musb_irq_work);
+
+	/* attach to the IRQ */
+	if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) {
+		dev_err(dev, "request_irq %d failed!\n", nIrq);
+		status = -ENODEV;
+		goto fail3;
+	}
+	musb->nIrq = nIrq;
+/* FIXME this handles wakeup irqs wrong */
+	if (enable_irq_wake(nIrq) == 0) {
+		musb->irq_wake = 1;
+		device_init_wakeup(dev, 1);
+	} else {
+		musb->irq_wake = 0;
+	}
+
+#ifndef __UBOOT__
+	/* host side needs more setup */
+	if (is_host_enabled(musb)) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
+
+		otg_set_host(musb->xceiv->otg, &hcd->self);
+
+		if (is_otg_enabled(musb))
+			hcd->self.otg_port = 1;
+		musb->xceiv->otg->host = &hcd->self;
+		hcd->power_budget = 2 * (plat->power ? : 250);
+
+		/* program PHY to use external vBus if required */
+		if (plat->extvbus) {
+			u8 busctl = musb_read_ulpi_buscontrol(musb->mregs);
+			busctl |= MUSB_ULPI_USE_EXTVBUS;
+			musb_write_ulpi_buscontrol(musb->mregs, busctl);
+		}
+	}
+#endif
+
+	/* For the host-only role, we can activate right away.
+	 * (We expect the ID pin to be forcibly grounded!!)
+	 * Otherwise, wait till the gadget driver hooks up.
+	 */
+	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
+
+		MUSB_HST_MODE(musb);
+#ifndef __UBOOT__
+		musb->xceiv->otg->default_a = 1;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
+
+		status = usb_add_hcd(musb_to_hcd(musb), 0, 0);
+
+		hcd->self.uses_pio_for_control = 1;
+		dev_dbg(musb->controller, "%s mode, status %d, devctl %02x %c\n",
+			"HOST", status,
+			musb_readb(musb->mregs, MUSB_DEVCTL),
+			(musb_readb(musb->mregs, MUSB_DEVCTL)
+					& MUSB_DEVCTL_BDEVICE
+				? 'B' : 'A'));
+#endif
+
+	} else /* peripheral is enabled */ {
+		MUSB_DEV_MODE(musb);
+#ifndef __UBOOT__
+		musb->xceiv->otg->default_a = 0;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
+#endif
+
+		if (is_peripheral_capable())
+			status = musb_gadget_setup(musb);
+
+#ifndef __UBOOT__
+		dev_dbg(musb->controller, "%s mode, status %d, dev%02x\n",
+			is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
+			status,
+			musb_readb(musb->mregs, MUSB_DEVCTL));
+#endif
+
+	}
+	if (status < 0)
+		goto fail3;
+
+	status = musb_init_debugfs(musb);
+	if (status < 0)
+		goto fail4;
+
+#ifdef CONFIG_SYSFS
+	status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
+	if (status)
+		goto fail5;
+#endif
+
+	pm_runtime_put(musb->controller);
+
+	dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
+			({char *s;
+			 switch (musb->board_mode) {
+			 case MUSB_HOST:		s = "Host"; break;
+			 case MUSB_PERIPHERAL:	s = "Peripheral"; break;
+			 default:		s = "OTG"; break;
+			 }; s; }),
+			ctrl,
+			(is_dma_capable() && musb->dma_controller)
+			? "DMA" : "PIO",
+			musb->nIrq);
+
+#ifndef __UBOOT__
+	return 0;
+#else
+	return status == 0 ? musb : NULL;
+#endif
+
+fail5:
+	musb_exit_debugfs(musb);
+
+fail4:
+#ifndef __UBOOT__
+	if (!is_otg_enabled(musb) && is_host_enabled(musb))
+		usb_remove_hcd(musb_to_hcd(musb));
+	else
+#endif
+		musb_gadget_cleanup(musb);
+
+fail3:
+	pm_runtime_put_sync(musb->controller);
+
+fail2:
+	if (musb->irq_wake)
+		device_init_wakeup(dev, 0);
+	musb_platform_exit(musb);
+
+fail1:
+	dev_err(musb->controller,
+		"musb_init_controller failed with status %d\n", status);
+
+	musb_free(musb);
+
+fail0:
+
+#ifndef __UBOOT__
+	return status;
+#else
+	return status == 0 ? musb : NULL;
+#endif
+
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
+ * bridge to a platform device; this driver then suffices.
+ */
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static u64	*orig_dma_mask;
+#endif
+
+#ifndef __UBOOT__
+static int __devinit musb_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	int		irq = platform_get_irq_byname(pdev, "mc");
+	int		status;
+	struct resource	*iomem;
+	void __iomem	*base;
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem || irq <= 0)
+		return -ENODEV;
+
+	base = ioremap(iomem->start, resource_size(iomem));
+	if (!base) {
+		dev_err(dev, "ioremap failed\n");
+		return -ENOMEM;
+	}
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	/* clobbered by use_dma=n */
+	orig_dma_mask = dev->dma_mask;
+#endif
+	status = musb_init_controller(dev, irq, base);
+	if (status < 0)
+		iounmap(base);
+
+	return status;
+}
+
+static int __devexit musb_remove(struct platform_device *pdev)
+{
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+	void __iomem	*ctrl_base = musb->ctrl_base;
+
+	/* this gets called on rmmod.
+	 *  - Host mode: host may still be active
+	 *  - Peripheral mode: peripheral is deactivated (or never-activated)
+	 *  - OTG mode: both roles are deactivated (or never-activated)
+	 */
+	musb_exit_debugfs(musb);
+	musb_shutdown(pdev);
+
+	musb_free(musb);
+	iounmap(ctrl_base);
+	device_init_wakeup(&pdev->dev, 0);
+#ifndef CONFIG_MUSB_PIO_ONLY
+	pdev->dev.dma_mask = orig_dma_mask;
+#endif
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+
+static void musb_save_context(struct musb *musb)
+{
+	int i;
+	void __iomem *musb_base = musb->mregs;
+	void __iomem *epio;
+
+	if (is_host_enabled(musb)) {
+		musb->context.frame = musb_readw(musb_base, MUSB_FRAME);
+		musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
+		musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
+	}
+	musb->context.power = musb_readb(musb_base, MUSB_POWER);
+	musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
+	musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
+	musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
+	musb->context.index = musb_readb(musb_base, MUSB_INDEX);
+	musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
+
+	for (i = 0; i < musb->config->num_eps; ++i) {
+		struct musb_hw_ep	*hw_ep;
+
+		hw_ep = &musb->endpoints[i];
+		if (!hw_ep)
+			continue;
+
+		epio = hw_ep->regs;
+		if (!epio)
+			continue;
+
+		musb_writeb(musb_base, MUSB_INDEX, i);
+		musb->context.index_regs[i].txmaxp =
+			musb_readw(epio, MUSB_TXMAXP);
+		musb->context.index_regs[i].txcsr =
+			musb_readw(epio, MUSB_TXCSR);
+		musb->context.index_regs[i].rxmaxp =
+			musb_readw(epio, MUSB_RXMAXP);
+		musb->context.index_regs[i].rxcsr =
+			musb_readw(epio, MUSB_RXCSR);
+
+		if (musb->dyn_fifo) {
+			musb->context.index_regs[i].txfifoadd =
+					musb_read_txfifoadd(musb_base);
+			musb->context.index_regs[i].rxfifoadd =
+					musb_read_rxfifoadd(musb_base);
+			musb->context.index_regs[i].txfifosz =
+					musb_read_txfifosz(musb_base);
+			musb->context.index_regs[i].rxfifosz =
+					musb_read_rxfifosz(musb_base);
+		}
+		if (is_host_enabled(musb)) {
+			musb->context.index_regs[i].txtype =
+				musb_readb(epio, MUSB_TXTYPE);
+			musb->context.index_regs[i].txinterval =
+				musb_readb(epio, MUSB_TXINTERVAL);
+			musb->context.index_regs[i].rxtype =
+				musb_readb(epio, MUSB_RXTYPE);
+			musb->context.index_regs[i].rxinterval =
+				musb_readb(epio, MUSB_RXINTERVAL);
+
+			musb->context.index_regs[i].txfunaddr =
+				musb_read_txfunaddr(musb_base, i);
+			musb->context.index_regs[i].txhubaddr =
+				musb_read_txhubaddr(musb_base, i);
+			musb->context.index_regs[i].txhubport =
+				musb_read_txhubport(musb_base, i);
+
+			musb->context.index_regs[i].rxfunaddr =
+				musb_read_rxfunaddr(musb_base, i);
+			musb->context.index_regs[i].rxhubaddr =
+				musb_read_rxhubaddr(musb_base, i);
+			musb->context.index_regs[i].rxhubport =
+				musb_read_rxhubport(musb_base, i);
+		}
+	}
+}
+
+static void musb_restore_context(struct musb *musb)
+{
+	int i;
+	void __iomem *musb_base = musb->mregs;
+	void __iomem *ep_target_regs;
+	void __iomem *epio;
+
+	if (is_host_enabled(musb)) {
+		musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
+		musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
+		musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl);
+	}
+	musb_writeb(musb_base, MUSB_POWER, musb->context.power);
+	musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe);
+	musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe);
+	musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
+	musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
+
+	for (i = 0; i < musb->config->num_eps; ++i) {
+		struct musb_hw_ep	*hw_ep;
+
+		hw_ep = &musb->endpoints[i];
+		if (!hw_ep)
+			continue;
+
+		epio = hw_ep->regs;
+		if (!epio)
+			continue;
+
+		musb_writeb(musb_base, MUSB_INDEX, i);
+		musb_writew(epio, MUSB_TXMAXP,
+			musb->context.index_regs[i].txmaxp);
+		musb_writew(epio, MUSB_TXCSR,
+			musb->context.index_regs[i].txcsr);
+		musb_writew(epio, MUSB_RXMAXP,
+			musb->context.index_regs[i].rxmaxp);
+		musb_writew(epio, MUSB_RXCSR,
+			musb->context.index_regs[i].rxcsr);
+
+		if (musb->dyn_fifo) {
+			musb_write_txfifosz(musb_base,
+				musb->context.index_regs[i].txfifosz);
+			musb_write_rxfifosz(musb_base,
+				musb->context.index_regs[i].rxfifosz);
+			musb_write_txfifoadd(musb_base,
+				musb->context.index_regs[i].txfifoadd);
+			musb_write_rxfifoadd(musb_base,
+				musb->context.index_regs[i].rxfifoadd);
+		}
+
+		if (is_host_enabled(musb)) {
+			musb_writeb(epio, MUSB_TXTYPE,
+				musb->context.index_regs[i].txtype);
+			musb_writeb(epio, MUSB_TXINTERVAL,
+				musb->context.index_regs[i].txinterval);
+			musb_writeb(epio, MUSB_RXTYPE,
+				musb->context.index_regs[i].rxtype);
+			musb_writeb(epio, MUSB_RXINTERVAL,
+
+			musb->context.index_regs[i].rxinterval);
+			musb_write_txfunaddr(musb_base, i,
+				musb->context.index_regs[i].txfunaddr);
+			musb_write_txhubaddr(musb_base, i,
+				musb->context.index_regs[i].txhubaddr);
+			musb_write_txhubport(musb_base, i,
+				musb->context.index_regs[i].txhubport);
+
+			ep_target_regs =
+				musb_read_target_reg_base(i, musb_base);
+
+			musb_write_rxfunaddr(ep_target_regs,
+				musb->context.index_regs[i].rxfunaddr);
+			musb_write_rxhubaddr(ep_target_regs,
+				musb->context.index_regs[i].rxhubaddr);
+			musb_write_rxhubport(ep_target_regs,
+				musb->context.index_regs[i].rxhubport);
+		}
+	}
+	musb_writeb(musb_base, MUSB_INDEX, musb->context.index);
+}
+
+static int musb_suspend(struct device *dev)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (is_peripheral_active(musb)) {
+		/* FIXME force disconnect unless we know USB will wake
+		 * the system up quickly enough to respond ...
+		 */
+	} else if (is_host_active(musb)) {
+		/* we know all the children are suspended; sometimes
+		 * they will even be wakeup-enabled.
+		 */
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+static int musb_resume_noirq(struct device *dev)
+{
+	/* for static cmos like DaVinci, register values were preserved
+	 * unless for some reason the whole soc powered down or the USB
+	 * module got reset through the PSC (vs just being disabled).
+	 */
+	return 0;
+}
+
+static int musb_runtime_suspend(struct device *dev)
+{
+	struct musb	*musb = dev_to_musb(dev);
+
+	musb_save_context(musb);
+
+	return 0;
+}
+
+static int musb_runtime_resume(struct device *dev)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	static int	first = 1;
+
+	/*
+	 * When pm_runtime_get_sync called for the first time in driver
+	 * init,  some of the structure is still not initialized which is
+	 * used in restore function. But clock needs to be
+	 * enabled before any register access, so
+	 * pm_runtime_get_sync has to be called.
+	 * Also context restore without save does not make
+	 * any sense
+	 */
+	if (!first)
+		musb_restore_context(musb);
+	first = 0;
+
+	return 0;
+}
+
+static const struct dev_pm_ops musb_dev_pm_ops = {
+	.suspend	= musb_suspend,
+	.resume_noirq	= musb_resume_noirq,
+	.runtime_suspend = musb_runtime_suspend,
+	.runtime_resume = musb_runtime_resume,
+};
+
+#define MUSB_DEV_PM_OPS (&musb_dev_pm_ops)
+#else
+#define	MUSB_DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver musb_driver = {
+	.driver = {
+		.name		= (char *)musb_driver_name,
+		.bus		= &platform_bus_type,
+		.owner		= THIS_MODULE,
+		.pm		= MUSB_DEV_PM_OPS,
+	},
+	.probe		= musb_probe,
+	.remove		= __devexit_p(musb_remove),
+	.shutdown	= musb_shutdown,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init musb_init(void)
+{
+	if (usb_disabled())
+		return 0;
+
+	pr_info("%s: version " MUSB_VERSION ", "
+		"?dma?"
+		", "
+		"otg (peripheral+host)",
+		musb_driver_name);
+	return platform_driver_register(&musb_driver);
+}
+module_init(musb_init);
+
+static void __exit musb_cleanup(void)
+{
+	platform_driver_unregister(&musb_driver);
+}
+module_exit(musb_cleanup);
+#endif
diff --git a/drivers/usb/musb-new/musb_core.h b/drivers/usb/musb-new/musb_core.h
new file mode 100644
index 0000000..2695742
--- /dev/null
+++ b/drivers/usb/musb-new/musb_core.h
@@ -0,0 +1,623 @@
+/*
+ * MUSB OTG driver defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_CORE_H__
+#define __MUSB_CORE_H__
+
+#ifndef __UBOOT__
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/device.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#else
+#include <asm/errno.h>
+#endif
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+
+struct musb;
+struct musb_hw_ep;
+struct musb_ep;
+
+/* Helper defines for struct musb->hwvers */
+#define MUSB_HWVERS_MAJOR(x)	((x >> 10) & 0x1f)
+#define MUSB_HWVERS_MINOR(x)	(x & 0x3ff)
+#define MUSB_HWVERS_RC		0x8000
+#define MUSB_HWVERS_1300	0x52C
+#define MUSB_HWVERS_1400	0x590
+#define MUSB_HWVERS_1800	0x720
+#define MUSB_HWVERS_1900	0x784
+#define MUSB_HWVERS_2000	0x800
+
+#include "musb_debug.h"
+#include "musb_dma.h"
+
+#include "musb_io.h"
+#include "musb_regs.h"
+
+#include "musb_gadget.h"
+#ifndef __UBOOT__
+#include <linux/usb/hcd.h>
+#endif
+#include "musb_host.h"
+
+#define	is_peripheral_enabled(musb)	((musb)->board_mode != MUSB_HOST)
+#define	is_host_enabled(musb)		((musb)->board_mode != MUSB_PERIPHERAL)
+#define	is_otg_enabled(musb)		((musb)->board_mode == MUSB_OTG)
+
+/* NOTE:  otg and peripheral-only state machines start at B_IDLE.
+ * OTG or host-only go to A_IDLE when ID is sensed.
+ */
+#define is_peripheral_active(m)		(!(m)->is_host)
+#define is_host_active(m)		((m)->is_host)
+
+#ifdef CONFIG_PROC_FS
+#include <linux/fs.h>
+#define MUSB_CONFIG_PROC_FS
+#endif
+
+/****************************** PERIPHERAL ROLE *****************************/
+
+#ifndef __UBOOT__
+#define	is_peripheral_capable()	(1)
+#else
+#ifdef CONFIG_MUSB_GADGET
+#define	is_peripheral_capable()	(1)
+#else
+#define	is_peripheral_capable()	(0)
+#endif
+#endif
+
+extern irqreturn_t musb_g_ep0_irq(struct musb *);
+extern void musb_g_tx(struct musb *, u8);
+extern void musb_g_rx(struct musb *, u8);
+extern void musb_g_reset(struct musb *);
+extern void musb_g_suspend(struct musb *);
+extern void musb_g_resume(struct musb *);
+extern void musb_g_wakeup(struct musb *);
+extern void musb_g_disconnect(struct musb *);
+
+/****************************** HOST ROLE ***********************************/
+
+#ifndef __UBOOT__
+#define	is_host_capable()	(1)
+#else
+#ifdef CONFIG_MUSB_HOST
+#define	is_host_capable()	(1)
+#else
+#define	is_host_capable()	(0)
+#endif
+#endif
+
+extern irqreturn_t musb_h_ep0_irq(struct musb *);
+extern void musb_host_tx(struct musb *, u8);
+extern void musb_host_rx(struct musb *, u8);
+
+/****************************** CONSTANTS ********************************/
+
+#ifndef MUSB_C_NUM_EPS
+#define MUSB_C_NUM_EPS ((u8)16)
+#endif
+
+#ifndef MUSB_MAX_END0_PACKET
+#define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
+#endif
+
+/* host side ep0 states */
+enum musb_h_ep0_state {
+	MUSB_EP0_IDLE,
+	MUSB_EP0_START,			/* expect ack of setup */
+	MUSB_EP0_IN,			/* expect IN DATA */
+	MUSB_EP0_OUT,			/* expect ack of OUT DATA */
+	MUSB_EP0_STATUS,		/* expect ack of STATUS */
+} __attribute__ ((packed));
+
+/* peripheral side ep0 states */
+enum musb_g_ep0_state {
+	MUSB_EP0_STAGE_IDLE,		/* idle, waiting for SETUP */
+	MUSB_EP0_STAGE_SETUP,		/* received SETUP */
+	MUSB_EP0_STAGE_TX,		/* IN data */
+	MUSB_EP0_STAGE_RX,		/* OUT data */
+	MUSB_EP0_STAGE_STATUSIN,	/* (after OUT data) */
+	MUSB_EP0_STAGE_STATUSOUT,	/* (after IN data) */
+	MUSB_EP0_STAGE_ACKWAIT,		/* after zlp, before statusin */
+} __attribute__ ((packed));
+
+/*
+ * OTG protocol constants.  See USB OTG 1.3 spec,
+ * sections 5.5 "Device Timings" and 6.6.5 "Timers".
+ */
+#define OTG_TIME_A_WAIT_VRISE	100		/* msec (max) */
+#define OTG_TIME_A_WAIT_BCON	1100		/* min 1 second */
+#define OTG_TIME_A_AIDL_BDIS	200		/* min 200 msec */
+#define OTG_TIME_B_ASE0_BRST	100		/* min 3.125 ms */
+
+
+/*************************** REGISTER ACCESS ********************************/
+
+/* Endpoint registers (other than dynfifo setup) can be accessed either
+ * directly with the "flat" model, or after setting up an index register.
+ */
+
+#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \
+		|| defined(CONFIG_SOC_OMAP3430) || defined(CONFIG_BLACKFIN) \
+		|| defined(CONFIG_ARCH_OMAP4)
+/* REVISIT indexed access seemed to
+ * misbehave (on DaVinci) for at least peripheral IN ...
+ */
+#define	MUSB_FLAT_REG
+#endif
+
+/* TUSB mapping: "flat" plus ep0 special cases */
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+#define musb_ep_select(_mbase, _epnum) \
+	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define	MUSB_EP_OFFSET			MUSB_TUSB_OFFSET
+
+/* "flat" mapping: each endpoint has its own i/o address */
+#elif	defined(MUSB_FLAT_REG)
+#define musb_ep_select(_mbase, _epnum)	(((void)(_mbase)), ((void)(_epnum)))
+#define	MUSB_EP_OFFSET			MUSB_FLAT_OFFSET
+
+/* "indexed" mapping: INDEX register controls register bank select */
+#else
+#define musb_ep_select(_mbase, _epnum) \
+	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define	MUSB_EP_OFFSET			MUSB_INDEXED_OFFSET
+#endif
+
+/****************************** FUNCTIONS ********************************/
+
+#define MUSB_HST_MODE(_musb)\
+	{ (_musb)->is_host = true; }
+#define MUSB_DEV_MODE(_musb) \
+	{ (_musb)->is_host = false; }
+
+#define test_devctl_hst_mode(_x) \
+	(musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)
+
+#define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")
+
+/******************************** TYPES *************************************/
+
+/**
+ * struct musb_platform_ops - Operations passed to musb_core by HW glue layer
+ * @init:	turns on clocks, sets up platform-specific registers, etc
+ * @exit:	undoes @init
+ * @set_mode:	forcefully changes operating mode
+ * @try_ilde:	tries to idle the IP
+ * @vbus_status: returns vbus status if possible
+ * @set_vbus:	forces vbus status
+ * @adjust_channel_params: pre check for standard dma channel_program func
+ */
+struct musb_platform_ops {
+	int	(*init)(struct musb *musb);
+	int	(*exit)(struct musb *musb);
+
+	void	(*enable)(struct musb *musb);
+	void	(*disable)(struct musb *musb);
+
+	int	(*set_mode)(struct musb *musb, u8 mode);
+	void	(*try_idle)(struct musb *musb, unsigned long timeout);
+
+	int	(*vbus_status)(struct musb *musb);
+	void	(*set_vbus)(struct musb *musb, int on);
+
+	int	(*adjust_channel_params)(struct dma_channel *channel,
+				u16 packet_sz, u8 *mode,
+				dma_addr_t *dma_addr, u32 *len);
+};
+
+/*
+ * struct musb_hw_ep - endpoint hardware (bidirectional)
+ *
+ * Ordered slightly for better cacheline locality.
+ */
+struct musb_hw_ep {
+	struct musb		*musb;
+	void __iomem		*fifo;
+	void __iomem		*regs;
+
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+	void __iomem		*conf;
+#endif
+
+	/* index in musb->endpoints[]  */
+	u8			epnum;
+
+	/* hardware configuration, possibly dynamic */
+	bool			is_shared_fifo;
+	bool			tx_double_buffered;
+	bool			rx_double_buffered;
+	u16			max_packet_sz_tx;
+	u16			max_packet_sz_rx;
+
+	struct dma_channel	*tx_channel;
+	struct dma_channel	*rx_channel;
+
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+	/* TUSB has "asynchronous" and "synchronous" dma modes */
+	dma_addr_t		fifo_async;
+	dma_addr_t		fifo_sync;
+	void __iomem		*fifo_sync_va;
+#endif
+
+	void __iomem		*target_regs;
+
+	/* currently scheduled peripheral endpoint */
+	struct musb_qh		*in_qh;
+	struct musb_qh		*out_qh;
+
+	u8			rx_reinit;
+	u8			tx_reinit;
+
+	/* peripheral side */
+	struct musb_ep		ep_in;			/* TX */
+	struct musb_ep		ep_out;			/* RX */
+};
+
+static inline struct musb_request *next_in_request(struct musb_hw_ep *hw_ep)
+{
+	return next_request(&hw_ep->ep_in);
+}
+
+static inline struct musb_request *next_out_request(struct musb_hw_ep *hw_ep)
+{
+	return next_request(&hw_ep->ep_out);
+}
+
+struct musb_csr_regs {
+	/* FIFO registers */
+	u16 txmaxp, txcsr, rxmaxp, rxcsr;
+	u16 rxfifoadd, txfifoadd;
+	u8 txtype, txinterval, rxtype, rxinterval;
+	u8 rxfifosz, txfifosz;
+	u8 txfunaddr, txhubaddr, txhubport;
+	u8 rxfunaddr, rxhubaddr, rxhubport;
+};
+
+struct musb_context_registers {
+
+	u8 power;
+	u16 intrtxe, intrrxe;
+	u8 intrusbe;
+	u16 frame;
+	u8 index, testmode;
+
+	u8 devctl, busctl, misc;
+	u32 otg_interfsel;
+
+	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
+};
+
+/*
+ * struct musb - Driver instance data.
+ */
+struct musb {
+	/* device lock */
+	spinlock_t		lock;
+
+	const struct musb_platform_ops *ops;
+	struct musb_context_registers context;
+
+	irqreturn_t		(*isr)(int, void *);
+	struct work_struct	irq_work;
+	u16			hwvers;
+
+/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
+#define MUSB_PORT_STAT_RESUME	(1 << 31)
+
+	u32			port1_status;
+
+	unsigned long		rh_timer;
+
+	enum musb_h_ep0_state	ep0_stage;
+
+	/* bulk traffic normally dedicates endpoint hardware, and each
+	 * direction has its own ring of host side endpoints.
+	 * we try to progress the transfer at the head of each endpoint's
+	 * queue until it completes or NAKs too much; then we try the next
+	 * endpoint.
+	 */
+	struct musb_hw_ep	*bulk_ep;
+
+	struct list_head	control;	/* of musb_qh */
+	struct list_head	in_bulk;	/* of musb_qh */
+	struct list_head	out_bulk;	/* of musb_qh */
+
+	struct timer_list	otg_timer;
+	struct notifier_block	nb;
+
+	struct dma_controller	*dma_controller;
+
+	struct device		*controller;
+	void __iomem		*ctrl_base;
+	void __iomem		*mregs;
+
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+	dma_addr_t		async;
+	dma_addr_t		sync;
+	void __iomem		*sync_va;
+#endif
+
+	/* passed down from chip/board specific irq handlers */
+	u8			int_usb;
+	u16			int_rx;
+	u16			int_tx;
+
+	struct usb_phy		*xceiv;
+
+	int nIrq;
+	unsigned		irq_wake:1;
+
+	struct musb_hw_ep	 endpoints[MUSB_C_NUM_EPS];
+#define control_ep		endpoints
+
+#define VBUSERR_RETRY_COUNT	3
+	u16			vbuserr_retry;
+	u16 epmask;
+	u8 nr_endpoints;
+
+	u8 board_mode;		/* enum musb_mode */
+	int			(*board_set_power)(int state);
+
+	u8			min_power;	/* vbus for periph, in mA/2 */
+
+	bool			is_host;
+
+	int			a_wait_bcon;	/* VBUS timeout in msecs */
+	unsigned long		idle_timeout;	/* Next timeout in jiffies */
+
+	/* active means connected and not suspended */
+	unsigned		is_active:1;
+
+	unsigned is_multipoint:1;
+	unsigned ignore_disconnect:1;	/* during bus resets */
+
+	unsigned		hb_iso_rx:1;	/* high bandwidth iso rx? */
+	unsigned		hb_iso_tx:1;	/* high bandwidth iso tx? */
+	unsigned		dyn_fifo:1;	/* dynamic FIFO supported? */
+
+	unsigned		bulk_split:1;
+#define	can_bulk_split(musb,type) \
+	(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
+
+	unsigned		bulk_combine:1;
+#define	can_bulk_combine(musb,type) \
+	(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
+
+	/* is_suspended means USB B_PERIPHERAL suspend */
+	unsigned		is_suspended:1;
+
+	/* may_wakeup means remote wakeup is enabled */
+	unsigned		may_wakeup:1;
+
+	/* is_self_powered is reported in device status and the
+	 * config descriptor.  is_bus_powered means B_PERIPHERAL
+	 * draws some VBUS current; both can be true.
+	 */
+	unsigned		is_self_powered:1;
+	unsigned		is_bus_powered:1;
+
+	unsigned		set_address:1;
+	unsigned		test_mode:1;
+	unsigned		softconnect:1;
+
+	u8			address;
+	u8			test_mode_nr;
+	u16			ackpend;		/* ep0 */
+	enum musb_g_ep0_state	ep0_state;
+	struct usb_gadget	g;			/* the gadget */
+	struct usb_gadget_driver *gadget_driver;	/* its driver */
+
+	/*
+	 * FIXME: Remove this flag.
+	 *
+	 * This is only added to allow Blackfin to work
+	 * with current driver. For some unknown reason
+	 * Blackfin doesn't work with double buffering
+	 * and that's enabled by default.
+	 *
+	 * We added this flag to forcefully disable double
+	 * buffering until we get it working.
+	 */
+	unsigned                double_buffer_not_ok:1;
+
+	struct musb_hdrc_config	*config;
+
+#ifdef MUSB_CONFIG_PROC_FS
+	struct proc_dir_entry *proc_entry;
+#endif
+};
+
+static inline struct musb *gadget_to_musb(struct usb_gadget *g)
+{
+	return container_of(g, struct musb, g);
+}
+
+#ifdef CONFIG_BLACKFIN
+static inline int musb_read_fifosize(struct musb *musb,
+		struct musb_hw_ep *hw_ep, u8 epnum)
+{
+	musb->nr_endpoints++;
+	musb->epmask |= (1 << epnum);
+
+	if (epnum < 5) {
+		hw_ep->max_packet_sz_tx = 128;
+		hw_ep->max_packet_sz_rx = 128;
+	} else {
+		hw_ep->max_packet_sz_tx = 1024;
+		hw_ep->max_packet_sz_rx = 1024;
+	}
+	hw_ep->is_shared_fifo = false;
+
+	return 0;
+}
+
+static inline void musb_configure_ep0(struct musb *musb)
+{
+	musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+	musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+	musb->endpoints[0].is_shared_fifo = true;
+}
+
+#else
+
+static inline int musb_read_fifosize(struct musb *musb,
+		struct musb_hw_ep *hw_ep, u8 epnum)
+{
+	void *mbase = musb->mregs;
+	u8 reg = 0;
+
+	/* read from core using indexed model */
+	reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE));
+	/* 0's returned when no more endpoints */
+	if (!reg)
+		return -ENODEV;
+
+	musb->nr_endpoints++;
+	musb->epmask |= (1 << epnum);
+
+	hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
+
+	/* shared TX/RX FIFO? */
+	if ((reg & 0xf0) == 0xf0) {
+		hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
+		hw_ep->is_shared_fifo = true;
+		return 0;
+	} else {
+		hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
+		hw_ep->is_shared_fifo = false;
+	}
+
+	return 0;
+}
+
+static inline void musb_configure_ep0(struct musb *musb)
+{
+	musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+	musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+	musb->endpoints[0].is_shared_fifo = true;
+}
+#endif /* CONFIG_BLACKFIN */
+
+
+/***************************** Glue it together *****************************/
+
+extern const char musb_driver_name[];
+
+extern void musb_start(struct musb *musb);
+extern void musb_stop(struct musb *musb);
+
+extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
+extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
+
+extern void musb_load_testpacket(struct musb *);
+
+extern irqreturn_t musb_interrupt(struct musb *);
+
+extern void musb_hnp_stop(struct musb *musb);
+
+static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
+{
+	if (musb->ops->set_vbus)
+		musb->ops->set_vbus(musb, is_on);
+}
+
+static inline void musb_platform_enable(struct musb *musb)
+{
+	if (musb->ops->enable)
+		musb->ops->enable(musb);
+}
+
+static inline void musb_platform_disable(struct musb *musb)
+{
+	if (musb->ops->disable)
+		musb->ops->disable(musb);
+}
+
+static inline int musb_platform_set_mode(struct musb *musb, u8 mode)
+{
+	if (!musb->ops->set_mode)
+		return 0;
+
+	return musb->ops->set_mode(musb, mode);
+}
+
+static inline void musb_platform_try_idle(struct musb *musb,
+		unsigned long timeout)
+{
+	if (musb->ops->try_idle)
+		musb->ops->try_idle(musb, timeout);
+}
+
+static inline int musb_platform_get_vbus_status(struct musb *musb)
+{
+	if (!musb->ops->vbus_status)
+		return 0;
+
+	return musb->ops->vbus_status(musb);
+}
+
+static inline int musb_platform_init(struct musb *musb)
+{
+	if (!musb->ops->init)
+		return -EINVAL;
+
+	return musb->ops->init(musb);
+}
+
+static inline int musb_platform_exit(struct musb *musb)
+{
+	if (!musb->ops->exit)
+		return -EINVAL;
+
+	return musb->ops->exit(musb);
+}
+
+#ifdef __UBOOT__
+struct musb *
+musb_init_controller(struct musb_hdrc_platform_data *plat, struct device *dev,
+			     void *ctrl);
+#endif
+#endif	/* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb-new/musb_debug.h b/drivers/usb/musb-new/musb_debug.h
new file mode 100644
index 0000000..27ba8f7
--- /dev/null
+++ b/drivers/usb/musb-new/musb_debug.h
@@ -0,0 +1,58 @@
+/*
+ * MUSB OTG driver debug defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_DEBUG_H__
+#define __MUSB_LINUX_DEBUG_H__
+
+#define yprintk(facility, format, args...) \
+	do { printk(facility "%s %d: " format , \
+	__func__, __LINE__ , ## args); } while (0)
+#define WARNING(fmt, args...) yprintk(KERN_WARNING, fmt, ## args)
+#define INFO(fmt, args...) yprintk(KERN_INFO, fmt, ## args)
+#define ERR(fmt, args...) yprintk(KERN_ERR, fmt, ## args)
+
+#ifdef CONFIG_DEBUG_FS
+int musb_init_debugfs(struct musb *musb);
+void musb_exit_debugfs(struct musb *musb);
+#else
+static inline int musb_init_debugfs(struct musb *musb)
+{
+	return 0;
+}
+static inline void musb_exit_debugfs(struct musb *musb)
+{
+}
+#endif
+
+#endif				/*  __MUSB_LINUX_DEBUG_H__ */
diff --git a/drivers/usb/musb-new/musb_dma.h b/drivers/usb/musb-new/musb_dma.h
new file mode 100644
index 0000000..3a97c4e
--- /dev/null
+++ b/drivers/usb/musb-new/musb_dma.h
@@ -0,0 +1,186 @@
+/*
+ * MUSB OTG driver DMA controller abstraction
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_DMA_H__
+#define __MUSB_DMA_H__
+
+struct musb_hw_ep;
+
+/*
+ * DMA Controller Abstraction
+ *
+ * DMA Controllers are abstracted to allow use of a variety of different
+ * implementations of DMA, as allowed by the Inventra USB cores.  On the
+ * host side, usbcore sets up the DMA mappings and flushes caches; on the
+ * peripheral side, the gadget controller driver does.  Responsibilities
+ * of a DMA controller driver include:
+ *
+ *  - Handling the details of moving multiple USB packets
+ *    in cooperation with the Inventra USB core, including especially
+ *    the correct RX side treatment of short packets and buffer-full
+ *    states (both of which terminate transfers).
+ *
+ *  - Knowing the correlation between dma channels and the
+ *    Inventra core's local endpoint resources and data direction.
+ *
+ *  - Maintaining a list of allocated/available channels.
+ *
+ *  - Updating channel status on interrupts,
+ *    whether shared with the Inventra core or separate.
+ */
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+#define	is_dma_capable()	(1)
+#else
+#define	is_dma_capable()	(0)
+#endif
+
+#ifdef CONFIG_USB_TI_CPPI_DMA
+#define	is_cppi_enabled()	1
+#else
+#define	is_cppi_enabled()	0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap()			1
+#else
+#define tusb_dma_omap()			0
+#endif
+
+/* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1
+ *	Only allow DMA mode 1 to be used when the USB will actually generate the
+ *	interrupts we expect.
+ */
+#ifdef CONFIG_BLACKFIN
+# undef USE_MODE1
+# if !ANOMALY_05000456
+#  define USE_MODE1
+# endif
+#endif
+
+/*
+ * DMA channel status ... updated by the dma controller driver whenever that
+ * status changes, and protected by the overall controller spinlock.
+ */
+enum dma_channel_status {
+	/* unallocated */
+	MUSB_DMA_STATUS_UNKNOWN,
+	/* allocated ... but not busy, no errors */
+	MUSB_DMA_STATUS_FREE,
+	/* busy ... transactions are active */
+	MUSB_DMA_STATUS_BUSY,
+	/* transaction(s) aborted due to ... dma or memory bus error */
+	MUSB_DMA_STATUS_BUS_ABORT,
+	/* transaction(s) aborted due to ... core error or USB fault */
+	MUSB_DMA_STATUS_CORE_ABORT
+};
+
+struct dma_controller;
+
+/**
+ * struct dma_channel - A DMA channel.
+ * @private_data: channel-private data
+ * @max_len: the maximum number of bytes the channel can move in one
+ *	transaction (typically representing many USB maximum-sized packets)
+ * @actual_len: how many bytes have been transferred
+ * @status: current channel status (updated e.g. on interrupt)
+ * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
+ *
+ * channels are associated with an endpoint for the duration of at least
+ * one usb transfer.
+ */
+struct dma_channel {
+	void			*private_data;
+	/* FIXME not void* private_data, but a dma_controller * */
+	size_t			max_len;
+	size_t			actual_len;
+	enum dma_channel_status	status;
+	bool			desired_mode;
+};
+
+/*
+ * dma_channel_status - return status of dma channel
+ * @c: the channel
+ *
+ * Returns the software's view of the channel status.  If that status is BUSY
+ * then it's possible that the hardware has completed (or aborted) a transfer,
+ * so the driver needs to update that status.
+ */
+static inline enum dma_channel_status
+dma_channel_status(struct dma_channel *c)
+{
+	return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/**
+ * struct dma_controller - A DMA Controller.
+ * @start: call this to start a DMA controller;
+ *	return 0 on success, else negative errno
+ * @stop: call this to stop a DMA controller
+ *	return 0 on success, else negative errno
+ * @channel_alloc: call this to allocate a DMA channel
+ * @channel_release: call this to release a DMA channel
+ * @channel_abort: call this to abort a pending DMA transaction,
+ *	returning it to FREE (but allocated) state
+ *
+ * Controllers manage dma channels.
+ */
+struct dma_controller {
+	int			(*start)(struct dma_controller *);
+	int			(*stop)(struct dma_controller *);
+	struct dma_channel	*(*channel_alloc)(struct dma_controller *,
+					struct musb_hw_ep *, u8 is_tx);
+	void			(*channel_release)(struct dma_channel *);
+	int			(*channel_program)(struct dma_channel *channel,
+							u16 maxpacket, u8 mode,
+							dma_addr_t dma_addr,
+							u32 length);
+	int			(*channel_abort)(struct dma_channel *);
+	int			(*is_compatible)(struct dma_channel *channel,
+							u16 maxpacket,
+							void *buf, u32 length);
+};
+
+/* called after channel_program(), may indicate a fault */
+extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
+
+
+extern struct dma_controller *__init
+dma_controller_create(struct musb *, void __iomem *);
+
+extern void dma_controller_destroy(struct dma_controller *);
+
+#endif	/* __MUSB_DMA_H__ */
diff --git a/drivers/usb/musb-new/musb_dsps.c b/drivers/usb/musb-new/musb_dsps.c
new file mode 100644
index 0000000..9a03917
--- /dev/null
+++ b/drivers/usb/musb-new/musb_dsps.c
@@ -0,0 +1,771 @@
+/*
+ * Texas Instruments DSPS platforms "glue layer"
+ *
+ * Copyright (C) 2012, by Texas Instruments
+ *
+ * Based on the am35x "glue layer" code.
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ * musb_dsps.c will be a common file for all the TI DSPS platforms
+ * such as dm64x, dm36x, dm35x, da8x, am35x and ti81x.
+ * For now only ti81x is using this and in future davinci.c, am35x.c
+ * da8xx.c would be merged to this file after testing.
+ */
+
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm_runtime.h>
+#include <linux/module.h>
+
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+#include <plat/usb.h>
+#else
+#include <common.h>
+#include <asm/omap_musb.h>
+#include "linux-compat.h"
+#endif
+
+#include "musb_core.h"
+
+/**
+ * avoid using musb_readx()/musb_writex() as glue layer should not be
+ * dependent on musb core layer symbols.
+ */
+static inline u8 dsps_readb(const void __iomem *addr, unsigned offset)
+	{ return __raw_readb(addr + offset); }
+
+static inline u32 dsps_readl(const void __iomem *addr, unsigned offset)
+	{ return __raw_readl(addr + offset); }
+
+static inline void dsps_writeb(void __iomem *addr, unsigned offset, u8 data)
+	{ __raw_writeb(data, addr + offset); }
+
+static inline void dsps_writel(void __iomem *addr, unsigned offset, u32 data)
+	{ __raw_writel(data, addr + offset); }
+
+/**
+ * DSPS musb wrapper register offset.
+ * FIXME: This should be expanded to have all the wrapper registers from TI DSPS
+ * musb ips.
+ */
+struct dsps_musb_wrapper {
+	u16	revision;
+	u16	control;
+	u16	status;
+	u16	eoi;
+	u16	epintr_set;
+	u16	epintr_clear;
+	u16	epintr_status;
+	u16	coreintr_set;
+	u16	coreintr_clear;
+	u16	coreintr_status;
+	u16	phy_utmi;
+	u16	mode;
+
+	/* bit positions for control */
+	unsigned	reset:5;
+
+	/* bit positions for interrupt */
+	unsigned	usb_shift:5;
+	u32		usb_mask;
+	u32		usb_bitmap;
+	unsigned	drvvbus:5;
+
+	unsigned	txep_shift:5;
+	u32		txep_mask;
+	u32		txep_bitmap;
+
+	unsigned	rxep_shift:5;
+	u32		rxep_mask;
+	u32		rxep_bitmap;
+
+	/* bit positions for phy_utmi */
+	unsigned	otg_disable:5;
+
+	/* bit positions for mode */
+	unsigned	iddig:5;
+	/* miscellaneous stuff */
+	u32		musb_core_offset;
+	u8		poll_seconds;
+};
+
+static const struct dsps_musb_wrapper ti81xx_driver_data __devinitconst = {
+	.revision		= 0x00,
+	.control		= 0x14,
+	.status			= 0x18,
+	.eoi			= 0x24,
+	.epintr_set		= 0x38,
+	.epintr_clear		= 0x40,
+	.epintr_status		= 0x30,
+	.coreintr_set		= 0x3c,
+	.coreintr_clear		= 0x44,
+	.coreintr_status	= 0x34,
+	.phy_utmi		= 0xe0,
+	.mode			= 0xe8,
+	.reset			= 0,
+	.otg_disable		= 21,
+	.iddig			= 8,
+	.usb_shift		= 0,
+	.usb_mask		= 0x1ff,
+	.usb_bitmap		= (0x1ff << 0),
+	.drvvbus		= 8,
+	.txep_shift		= 0,
+	.txep_mask		= 0xffff,
+	.txep_bitmap		= (0xffff << 0),
+	.rxep_shift		= 16,
+	.rxep_mask		= 0xfffe,
+	.rxep_bitmap		= (0xfffe << 16),
+	.musb_core_offset	= 0x400,
+	.poll_seconds		= 2,
+};
+
+/**
+ * DSPS glue structure.
+ */
+struct dsps_glue {
+	struct device *dev;
+	struct platform_device *musb;	/* child musb pdev */
+	const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
+	struct timer_list timer;	/* otg_workaround timer */
+};
+
+/**
+ * dsps_musb_enable - enable interrupts
+ */
+static void dsps_musb_enable(struct musb *musb)
+{
+#ifndef __UBOOT__
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+#else
+	const struct dsps_musb_wrapper *wrp = &ti81xx_driver_data;
+#endif
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 epmask, coremask;
+
+	/* Workaround: setup IRQs through both register sets. */
+	epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) |
+	       ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift);
+	coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF);
+
+	dsps_writel(reg_base, wrp->epintr_set, epmask);
+	dsps_writel(reg_base, wrp->coreintr_set, coremask);
+	/* Force the DRVVBUS IRQ so we can start polling for ID change. */
+#ifndef __UBOOT__
+	if (is_otg_enabled(musb))
+		dsps_writel(reg_base, wrp->coreintr_set,
+			    (1 << wrp->drvvbus) << wrp->usb_shift);
+#endif
+}
+
+/**
+ * dsps_musb_disable - disable HDRC and flush interrupts
+ */
+static void dsps_musb_disable(struct musb *musb)
+{
+#ifndef __UBOOT__
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *reg_base = musb->ctrl_base;
+
+	dsps_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
+	dsps_writel(reg_base, wrp->epintr_clear,
+			 wrp->txep_bitmap | wrp->rxep_bitmap);
+	dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	dsps_writel(reg_base, wrp->eoi, 0);
+#endif
+}
+
+#ifndef __UBOOT__
+static void otg_timer(unsigned long _musb)
+{
+	struct musb *musb = (void *)_musb;
+	void __iomem *mregs = musb->mregs;
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	u8 devctl;
+	unsigned long flags;
+
+	/*
+	 * We poll because DSPS IP's won't expose several OTG-critical
+	 * status change events (from the transceiver) otherwise.
+	 */
+	devctl = dsps_readb(mregs, MUSB_DEVCTL);
+	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
+				otg_state_string(musb->xceiv->state));
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv->state) {
+	case OTG_STATE_A_WAIT_BCON:
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		dsps_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+		devctl = dsps_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE) {
+			musb->xceiv->state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		} else {
+			musb->xceiv->state = OTG_STATE_A_IDLE;
+			MUSB_HST_MODE(musb);
+		}
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+		dsps_writel(musb->ctrl_base, wrp->coreintr_set,
+			    MUSB_INTR_VBUSERROR << wrp->usb_shift);
+		break;
+	case OTG_STATE_B_IDLE:
+		if (!is_peripheral_enabled(musb))
+			break;
+
+		devctl = dsps_readb(mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE)
+			mod_timer(&glue->timer,
+					jiffies + wrp->poll_seconds * HZ);
+		else
+			musb->xceiv->state = OTG_STATE_A_IDLE;
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	static unsigned long last_timer;
+
+	if (!is_otg_enabled(musb))
+		return;
+
+	if (timeout == 0)
+		timeout = jiffies + msecs_to_jiffies(3);
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || (musb->a_wait_bcon == 0 &&
+				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+		dev_dbg(musb->controller, "%s active, deleting timer\n",
+				otg_state_string(musb->xceiv->state));
+		del_timer(&glue->timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout) && timer_pending(&glue->timer)) {
+		dev_dbg(musb->controller,
+			"Longer idle timer already pending, ignoring...\n");
+		return;
+	}
+	last_timer = timeout;
+
+	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
+		otg_state_string(musb->xceiv->state),
+			jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&glue->timer, timeout);
+}
+#endif
+
+static irqreturn_t dsps_interrupt(int irq, void *hci)
+{
+	struct musb  *musb = hci;
+	void __iomem *reg_base = musb->ctrl_base;
+#ifndef __UBOOT__
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+#else
+	const struct dsps_musb_wrapper *wrp = &ti81xx_driver_data;
+#endif
+	unsigned long flags;
+	irqreturn_t ret = IRQ_NONE;
+	u32 epintr, usbintr;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* Get endpoint interrupts */
+	epintr = dsps_readl(reg_base, wrp->epintr_status);
+	musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift;
+	musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift;
+
+	if (epintr)
+		dsps_writel(reg_base, wrp->epintr_status, epintr);
+
+	/* Get usb core interrupts */
+	usbintr = dsps_readl(reg_base, wrp->coreintr_status);
+	if (!usbintr && !epintr)
+		goto eoi;
+
+	musb->int_usb =	(usbintr & wrp->usb_bitmap) >> wrp->usb_shift;
+	if (usbintr)
+		dsps_writel(reg_base, wrp->coreintr_status, usbintr);
+
+	dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
+			usbintr, epintr);
+#ifndef __UBOOT__
+	/*
+	 * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
+	 * DSPS IP's missing ID change IRQ.  We need an ID change IRQ to
+	 * switch appropriately between halves of the OTG state machine.
+	 * Managing DEVCTL.SESSION per Mentor docs requires that we know its
+	 * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+	 */
+	if ((usbintr & MUSB_INTR_BABBLE) && is_host_enabled(musb))
+		pr_info("CAUTION: musb: Babble Interrupt Occured\n");
+
+	if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
+		int drvvbus = dsps_readl(reg_base, wrp->status);
+		void __iomem *mregs = musb->mregs;
+		u8 devctl = dsps_readb(mregs, MUSB_DEVCTL);
+		int err;
+
+		err = is_host_enabled(musb) && (musb->int_usb &
+						MUSB_INTR_VBUSERROR);
+		if (err) {
+			/*
+			 * The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"-starting sessions
+			 * without waiting for VBUS to stop registering in
+			 * devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+			mod_timer(&glue->timer,
+					jiffies + wrp->poll_seconds * HZ);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (is_host_enabled(musb) && drvvbus) {
+			musb->is_active = 1;
+			MUSB_HST_MODE(musb);
+			musb->xceiv->otg->default_a = 1;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+			del_timer(&glue->timer);
+		} else {
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			musb->xceiv->otg->default_a = 0;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
+		}
+
+		/* NOTE: this must complete power-on within 100 ms. */
+		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				otg_state_string(musb->xceiv->state),
+				err ? " ERROR" : "",
+				devctl);
+		ret = IRQ_HANDLED;
+	}
+#endif
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		ret |= musb_interrupt(musb);
+
+ eoi:
+	/* EOI needs to be written for the IRQ to be re-asserted. */
+	if (ret == IRQ_HANDLED || epintr || usbintr)
+		dsps_writel(reg_base, wrp->eoi, 1);
+
+#ifndef __UBOOT__
+	/* Poll for ID change */
+	if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE)
+		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+#endif
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static int dsps_musb_init(struct musb *musb)
+{
+#ifndef __UBOOT__
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct omap_musb_board_data *data = plat->board_data;
+#else
+	struct omap_musb_board_data *data =
+			(struct omap_musb_board_data *)musb->controller;
+	const struct dsps_musb_wrapper *wrp = &ti81xx_driver_data;
+#endif
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 rev, val;
+	int status;
+
+	/* mentor core register starts at offset of 0x400 from musb base */
+	musb->mregs += wrp->musb_core_offset;
+
+#ifndef __UBOOT__
+	/* NOP driver needs change if supporting dual instance */
+	usb_nop_xceiv_register();
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv))
+		return -ENODEV;
+#endif
+
+	/* Returns zero if e.g. not clocked */
+	rev = dsps_readl(reg_base, wrp->revision);
+	if (!rev) {
+		status = -ENODEV;
+		goto err0;
+	}
+
+#ifndef __UBOOT__
+	if (is_host_enabled(musb))
+		setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
+#endif
+
+	/* Reset the musb */
+	dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
+
+	/* Start the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(1);
+
+	musb->isr = dsps_interrupt;
+
+	/* reset the otgdisable bit, needed for host mode to work */
+	val = dsps_readl(reg_base, wrp->phy_utmi);
+	val &= ~(1 << wrp->otg_disable);
+	dsps_writel(musb->ctrl_base, wrp->phy_utmi, val);
+
+	/* clear level interrupt */
+	dsps_writel(reg_base, wrp->eoi, 0);
+
+	return 0;
+err0:
+#ifndef __UBOOT__
+	usb_put_phy(musb->xceiv);
+	usb_nop_xceiv_unregister();
+#endif
+	return status;
+}
+
+static int dsps_musb_exit(struct musb *musb)
+{
+#ifndef __UBOOT__
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+#else
+	struct omap_musb_board_data *data =
+			(struct omap_musb_board_data *)musb->controller;
+#endif
+
+#ifndef __UBOOT__
+	if (is_host_enabled(musb))
+		del_timer_sync(&glue->timer);
+#endif
+
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
+
+#ifndef __UBOOT__
+	/* NOP driver needs change if supporting dual instance */
+	usb_put_phy(musb->xceiv);
+	usb_nop_xceiv_unregister();
+#endif
+
+	return 0;
+}
+
+#ifndef __UBOOT__
+static struct musb_platform_ops dsps_ops = {
+#else
+struct musb_platform_ops musb_dsps_ops = {
+#endif
+	.init		= dsps_musb_init,
+	.exit		= dsps_musb_exit,
+
+	.enable		= dsps_musb_enable,
+	.disable	= dsps_musb_disable,
+
+#ifndef __UBOOT__
+	.try_idle	= dsps_musb_try_idle,
+#endif
+};
+
+#ifndef __UBOOT__
+static u64 musb_dmamask = DMA_BIT_MASK(32);
+#endif
+
+#ifndef __UBOOT__
+static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
+{
+	struct device *dev = glue->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct musb_hdrc_platform_data  *pdata = dev->platform_data;
+	struct platform_device	*musb;
+	struct resource *res;
+	struct resource	resources[2];
+	char res_name[10];
+	int ret;
+
+	/* get memory resource */
+	sprintf(res_name, "musb%d", id);
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
+	if (!res) {
+		dev_err(dev, "%s get mem resource failed\n", res_name);
+		ret = -ENODEV;
+		goto err0;
+	}
+	res->parent = NULL;
+	resources[0] = *res;
+
+	/* get irq resource */
+	sprintf(res_name, "musb%d-irq", id);
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
+	if (!res) {
+		dev_err(dev, "%s get irq resource failed\n", res_name);
+		ret = -ENODEV;
+		goto err0;
+	}
+	res->parent = NULL;
+	resources[1] = *res;
+	resources[1].name = "mc";
+
+	/* allocate the child platform device */
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(dev, "failed to allocate musb device\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	musb->dev.parent		= dev;
+	musb->dev.dma_mask		= &musb_dmamask;
+	musb->dev.coherent_dma_mask	= musb_dmamask;
+
+	glue->musb			= musb;
+
+	pdata->platform_ops		= &dsps_ops;
+
+	ret = platform_device_add_resources(musb, resources, 2);
+	if (ret) {
+		dev_err(dev, "failed to add resources\n");
+		goto err1;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(dev, "failed to add platform_data\n");
+		goto err1;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(dev, "failed to register musb device\n");
+		goto err1;
+	}
+
+	return 0;
+
+err1:
+	platform_device_put(musb);
+err0:
+	return ret;
+}
+
+static void __devexit dsps_delete_musb_pdev(struct dsps_glue *glue)
+{
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+}
+
+static int __devinit dsps_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	const struct dsps_musb_wrapper *wrp =
+				(struct dsps_musb_wrapper *)id->driver_data;
+	struct dsps_glue *glue;
+	struct resource *iomem;
+	int ret;
+
+	/* allocate glue */
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "unable to allocate glue memory\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	/* get memory resource */
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		dev_err(&pdev->dev, "failed to get usbss mem resourse\n");
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	glue->dev = &pdev->dev;
+
+	glue->wrp = kmemdup(wrp, sizeof(*wrp), GFP_KERNEL);
+	if (!glue->wrp) {
+		dev_err(&pdev->dev, "failed to duplicate wrapper struct memory\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+	platform_set_drvdata(pdev, glue);
+
+	/* enable the usbss clocks */
+	pm_runtime_enable(&pdev->dev);
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pm_runtime_get_sync FAILED");
+		goto err2;
+	}
+
+	/* create the child platform device for first instances of musb */
+	ret = dsps_create_musb_pdev(glue, 0);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "failed to create child pdev\n");
+		goto err3;
+	}
+
+	return 0;
+
+err3:
+	pm_runtime_put(&pdev->dev);
+err2:
+	pm_runtime_disable(&pdev->dev);
+	kfree(glue->wrp);
+err1:
+	kfree(glue);
+err0:
+	return ret;
+}
+static int __devexit dsps_remove(struct platform_device *pdev)
+{
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+
+	/* delete the child platform device */
+	dsps_delete_musb_pdev(glue);
+
+	/* disable usbss clocks */
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	kfree(glue->wrp);
+	kfree(glue);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dsps_suspend(struct device *dev)
+{
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
+
+	return 0;
+}
+
+static int dsps_resume(struct device *dev)
+{
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+
+	/* Start the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(1);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
+#endif
+
+#ifndef __UBOOT__
+static const struct platform_device_id musb_dsps_id_table[] __devinitconst = {
+	{
+		.name	= "musb-ti81xx",
+		.driver_data	= (kernel_ulong_t) &ti81xx_driver_data,
+	},
+	{  },	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(platform, musb_dsps_id_table);
+
+static const struct of_device_id musb_dsps_of_match[] __devinitconst = {
+	{ .compatible = "musb-ti81xx", },
+	{ .compatible = "ti,ti81xx-musb", },
+	{ .compatible = "ti,am335x-musb", },
+	{  },
+};
+MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
+
+static struct platform_driver dsps_usbss_driver = {
+	.probe		= dsps_probe,
+	.remove         = __devexit_p(dsps_remove),
+	.driver         = {
+		.name   = "musb-dsps",
+		.pm	= &dsps_pm_ops,
+		.of_match_table	= musb_dsps_of_match,
+	},
+	.id_table	= musb_dsps_id_table,
+};
+
+MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer");
+MODULE_AUTHOR("Ravi B <ravibabu@ti.com>");
+MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init dsps_init(void)
+{
+	return platform_driver_register(&dsps_usbss_driver);
+}
+subsys_initcall(dsps_init);
+
+static void __exit dsps_exit(void)
+{
+	platform_driver_unregister(&dsps_usbss_driver);
+}
+module_exit(dsps_exit);
+#endif
diff --git a/drivers/usb/musb-new/musb_gadget.c b/drivers/usb/musb-new/musb_gadget.c
new file mode 100644
index 0000000..d2cb91a
--- /dev/null
+++ b/drivers/usb/musb-new/musb_gadget.c
@@ -0,0 +1,2333 @@
+/*
+ * MUSB OTG driver peripheral support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#else
+#include <common.h>
+#include <linux/usb/ch9.h>
+#include "linux-compat.h"
+#endif
+
+#include "musb_core.h"
+
+
+/* MUSB PERIPHERAL status 3-mar-2006:
+ *
+ * - EP0 seems solid.  It passes both USBCV and usbtest control cases.
+ *   Minor glitches:
+ *
+ *     + remote wakeup to Linux hosts work, but saw USBCV failures;
+ *       in one test run (operator error?)
+ *     + endpoint halt tests -- in both usbtest and usbcv -- seem
+ *       to break when dma is enabled ... is something wrongly
+ *       clearing SENDSTALL?
+ *
+ * - Mass storage behaved ok when last tested.  Network traffic patterns
+ *   (with lots of short transfers etc) need retesting; they turn up the
+ *   worst cases of the DMA, since short packets are typical but are not
+ *   required.
+ *
+ * - TX/IN
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + no cppi throughput issues other than no-hw-queueing
+ *     + failed with FLAT_REG (DaVinci)
+ *     + seems to behave with double buffering, PIO -and- CPPI
+ *     + with gadgetfs + AIO, requests got lost?
+ *
+ * - RX/OUT
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + dma is slow in typical case (short_not_ok is clear)
+ *     + double buffering ok with PIO
+ *     + double buffering *FAILS* with CPPI, wrong data bytes sometimes
+ *     + request lossage observed with gadgetfs
+ *
+ * - ISO not tested ... might work, but only weakly isochronous
+ *
+ * - Gadget driver disabling of softconnect during bind() is ignored; so
+ *   drivers can't hold off host requests until userspace is ready.
+ *   (Workaround:  they can turn it off later.)
+ *
+ * - PORTABILITY (assumes PIO works):
+ *     + DaVinci, basically works with cppi dma
+ *     + OMAP 2430, ditto with mentor dma
+ *     + TUSB 6010, platform-specific dma in the works
+ */
+
+/* ----------------------------------------------------------------------- */
+
+#define is_buffer_mapped(req) (is_dma_capable() && \
+					(req->map_state != UN_MAPPED))
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+/* Maps the buffer to dma  */
+
+static inline void map_dma_buffer(struct musb_request *request,
+			struct musb *musb, struct musb_ep *musb_ep)
+{
+	int compatible = true;
+	struct dma_controller *dma = musb->dma_controller;
+
+	request->map_state = UN_MAPPED;
+
+	if (!is_dma_capable() || !musb_ep->dma)
+		return;
+
+	/* Check if DMA engine can handle this request.
+	 * DMA code must reject the USB request explicitly.
+	 * Default behaviour is to map the request.
+	 */
+	if (dma->is_compatible)
+		compatible = dma->is_compatible(musb_ep->dma,
+				musb_ep->packet_sz, request->request.buf,
+				request->request.length);
+	if (!compatible)
+		return;
+
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		request->request.dma = dma_map_single(
+				musb->controller,
+				request->request.buf,
+				request->request.length,
+				request->tx
+					? DMA_TO_DEVICE
+					: DMA_FROM_DEVICE);
+		request->map_state = MUSB_MAPPED;
+	} else {
+		dma_sync_single_for_device(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->map_state = PRE_MAPPED;
+	}
+}
+
+/* Unmap the buffer from dma and maps it back to cpu */
+static inline void unmap_dma_buffer(struct musb_request *request,
+				struct musb *musb)
+{
+	if (!is_buffer_mapped(request))
+		return;
+
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		dev_vdbg(musb->controller,
+				"not unmapping a never mapped buffer\n");
+		return;
+	}
+	if (request->map_state == MUSB_MAPPED) {
+		dma_unmap_single(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->request.dma = DMA_ADDR_INVALID;
+	} else { /* PRE_MAPPED */
+		dma_sync_single_for_cpu(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+	}
+	request->map_state = UN_MAPPED;
+}
+#else
+static inline void map_dma_buffer(struct musb_request *request,
+			struct musb *musb, struct musb_ep *musb_ep)
+{
+}
+
+static inline void unmap_dma_buffer(struct musb_request *request,
+				struct musb *musb)
+{
+}
+#endif
+
+/*
+ * Immediately complete a request.
+ *
+ * @param request the request to complete
+ * @param status the status to complete the request with
+ * Context: controller locked, IRQs blocked.
+ */
+void musb_g_giveback(
+	struct musb_ep		*ep,
+	struct usb_request	*request,
+	int			status)
+__releases(ep->musb->lock)
+__acquires(ep->musb->lock)
+{
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			busy = ep->busy;
+
+	req = to_musb_request(request);
+
+	list_del(&req->list);
+	if (req->request.status == -EINPROGRESS)
+		req->request.status = status;
+	musb = req->musb;
+
+	ep->busy = 1;
+	spin_unlock(&musb->lock);
+	unmap_dma_buffer(req, musb);
+	if (request->status == 0)
+		dev_dbg(musb->controller, "%s done request %p,  %d/%d\n",
+				ep->end_point.name, request,
+				req->request.actual, req->request.length);
+	else
+		dev_dbg(musb->controller, "%s request %p, %d/%d fault %d\n",
+				ep->end_point.name, request,
+				req->request.actual, req->request.length,
+				request->status);
+	req->request.complete(&req->ep->end_point, &req->request);
+	spin_lock(&musb->lock);
+	ep->busy = busy;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Abort requests queued to an endpoint using the status. Synchronous.
+ * caller locked controller and blocked irqs, and selected this ep.
+ */
+static void nuke(struct musb_ep *ep, const int status)
+{
+	struct musb		*musb = ep->musb;
+	struct musb_request	*req = NULL;
+	void __iomem *epio = ep->musb->endpoints[ep->current_epnum].regs;
+
+	ep->busy = 1;
+
+	if (is_dma_capable() && ep->dma) {
+		struct dma_controller	*c = ep->musb->dma_controller;
+		int value;
+
+		if (ep->is_in) {
+			/*
+			 * The programming guide says that we must not clear
+			 * the DMAMODE bit before DMAENAB, so we only
+			 * clear it in the second write...
+			 */
+			musb_writew(epio, MUSB_TXCSR,
+				    MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_TXCSR,
+					0 | MUSB_TXCSR_FLUSHFIFO);
+		} else {
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+		}
+
+		value = c->channel_abort(ep->dma);
+		dev_dbg(musb->controller, "%s: abort DMA --> %d\n",
+				ep->name, value);
+		c->channel_release(ep->dma);
+		ep->dma = NULL;
+	}
+
+	while (!list_empty(&ep->req_list)) {
+		req = list_first_entry(&ep->req_list, struct musb_request, list);
+		musb_g_giveback(ep, &req->request, status);
+	}
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* Data transfers - pure PIO, pure DMA, or mixed mode */
+
+/*
+ * This assumes the separate CPPI engine is responding to DMA requests
+ * from the usb core ... sequenced a bit differently from mentor dma.
+ */
+
+static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
+{
+	if (can_bulk_split(musb, ep->type))
+		return ep->hw_ep->max_packet_sz_tx;
+	else
+		return ep->packet_sz;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral tx (IN) using Mentor DMA works as follows:
+	Only mode 0 is used for transfers <= wPktSize,
+	mode 1 is used for larger transfers,
+
+	One of the following happens:
+	- Host sends IN token which causes an endpoint interrupt
+		-> TxAvail
+			-> if DMA is currently busy, exit.
+			-> if queue is non-empty, txstate().
+
+	- Request is queued by the gadget driver.
+		-> if queue was previously empty, txstate()
+
+	txstate()
+		-> start
+		  /\	-> setup DMA
+		  |     (data is transferred to the FIFO, then sent out when
+		  |	IN token(s) are recd from Host.
+		  |		-> DMA interrupt on completion
+		  |		   calls TxAvail.
+		  |		      -> stop DMA, ~DMAENAB,
+		  |		      -> set TxPktRdy for last short pkt or zlp
+		  |		      -> Complete Request
+		  |		      -> Continue next request (call txstate)
+		  |___________________________________|
+
+ * Non-Mentor DMA engines can of course work differently, such as by
+ * upleveling from irq-per-packet to irq-per-buffer.
+ */
+
+#endif
+
+/*
+ * An endpoint is transmitting data. This can be called either from
+ * the IRQ routine or from ep.queue() to kickstart a request on an
+ * endpoint.
+ *
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void txstate(struct musb *musb, struct musb_request *req)
+{
+	u8			epnum = req->epnum;
+	struct musb_ep		*musb_ep;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct usb_request	*request;
+	u16			fifo_count = 0, csr;
+	int			use_dma = 0;
+
+	musb_ep = req->ep;
+
+	/* Check if EP is disabled */
+	if (!musb_ep->desc) {
+		dev_dbg(musb->controller, "ep:%s disabled - ignore request\n",
+						musb_ep->end_point.name);
+		return;
+	}
+
+	/* we shouldn't get here while DMA is active ... but we do ... */
+	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+		dev_dbg(musb->controller, "dma pending...\n");
+		return;
+	}
+
+	/* read TXCSR before */
+	csr = musb_readw(epio, MUSB_TXCSR);
+
+	request = &req->request;
+	fifo_count = min(max_ep_writesize(musb, musb_ep),
+			(int)(request->length - request->actual));
+
+	if (csr & MUSB_TXCSR_TXPKTRDY) {
+		dev_dbg(musb->controller, "%s old packet still ready , txcsr %03x\n",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	if (csr & MUSB_TXCSR_P_SENDSTALL) {
+		dev_dbg(musb->controller, "%s stalling, txcsr %03x\n",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	dev_dbg(musb->controller, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x\n",
+			epnum, musb_ep->packet_sz, fifo_count,
+			csr);
+
+#ifndef	CONFIG_MUSB_PIO_ONLY
+	if (is_buffer_mapped(req)) {
+		struct dma_controller	*c = musb->dma_controller;
+		size_t request_size;
+
+		/* setup DMA, then program endpoint CSR */
+		request_size = min_t(size_t, request->length - request->actual,
+					musb_ep->dma->max_len);
+
+		use_dma = (request->dma != DMA_ADDR_INVALID);
+
+		/* MUSB_TXCSR_P_ISO is still set correctly */
+
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
+		{
+			if (request_size < musb_ep->packet_sz)
+				musb_ep->dma->desired_mode = 0;
+			else
+				musb_ep->dma->desired_mode = 1;
+
+			use_dma = use_dma && c->channel_program(
+					musb_ep->dma, musb_ep->packet_sz,
+					musb_ep->dma->desired_mode,
+					request->dma + request->actual, request_size);
+			if (use_dma) {
+				if (musb_ep->dma->desired_mode == 0) {
+					/*
+					 * We must not clear the DMAMODE bit
+					 * before the DMAENAB bit -- and the
+					 * latter doesn't always get cleared
+					 * before we get here...
+					 */
+					csr &= ~(MUSB_TXCSR_AUTOSET
+						| MUSB_TXCSR_DMAENAB);
+					musb_writew(epio, MUSB_TXCSR, csr
+						| MUSB_TXCSR_P_WZC_BITS);
+					csr &= ~MUSB_TXCSR_DMAMODE;
+					csr |= (MUSB_TXCSR_DMAENAB |
+							MUSB_TXCSR_MODE);
+					/* against programming guide */
+				} else {
+					csr |= (MUSB_TXCSR_DMAENAB
+							| MUSB_TXCSR_DMAMODE
+							| MUSB_TXCSR_MODE);
+					if (!musb_ep->hb_mult)
+						csr |= MUSB_TXCSR_AUTOSET;
+				}
+				csr &= ~MUSB_TXCSR_P_UNDERRUN;
+
+				musb_writew(epio, MUSB_TXCSR, csr);
+			}
+		}
+
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+		/* program endpoint CSR first, then setup DMA */
+		csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
+		csr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE |
+		       MUSB_TXCSR_MODE;
+		musb_writew(epio, MUSB_TXCSR,
+			(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
+				| csr);
+
+		/* ensure writebuffer is empty */
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/* NOTE host side sets DMAENAB later than this; both are
+		 * OK since the transfer dma glue (between CPPI and Mentor
+		 * fifos) just tells CPPI it could start.  Data only moves
+		 * to the USB TX fifo when both fifos are ready.
+		 */
+
+		/* "mode" is irrelevant here; handle terminating ZLPs like
+		 * PIO does, since the hardware RNDIS mode seems unreliable
+		 * except for the last-packet-is-already-short case.
+		 */
+		use_dma = use_dma && c->channel_program(
+				musb_ep->dma, musb_ep->packet_sz,
+				0,
+				request->dma + request->actual,
+				request_size);
+		if (!use_dma) {
+			c->channel_release(musb_ep->dma);
+			musb_ep->dma = NULL;
+			csr &= ~MUSB_TXCSR_DMAENAB;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* invariant: prequest->buf is non-null */
+		}
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+		use_dma = use_dma && c->channel_program(
+				musb_ep->dma, musb_ep->packet_sz,
+				request->zero,
+				request->dma + request->actual,
+				request_size);
+#endif
+	}
+#endif
+
+	if (!use_dma) {
+		/*
+		 * Unmap the dma buffer back to cpu if dma channel
+		 * programming fails
+		 */
+		unmap_dma_buffer(req, musb);
+
+		musb_write_fifo(musb_ep->hw_ep, fifo_count,
+				(u8 *) (request->buf + request->actual));
+		request->actual += fifo_count;
+		csr |= MUSB_TXCSR_TXPKTRDY;
+		csr &= ~MUSB_TXCSR_P_UNDERRUN;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	}
+
+	/* host may already have the data when this message shows... */
+	dev_dbg(musb->controller, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d\n",
+			musb_ep->end_point.name, use_dma ? "dma" : "pio",
+			request->actual, request->length,
+			musb_readw(epio, MUSB_TXCSR),
+			fifo_count,
+			musb_readw(epio, MUSB_TXMAXP));
+}
+
+/*
+ * FIFO state update (e.g. data ready).
+ * Called from IRQ,  with controller locked.
+ */
+void musb_g_tx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct musb_request	*req;
+	struct usb_request	*request;
+	u8 __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_in;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+	req = next_request(musb_ep);
+	request = &req->request;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	dev_dbg(musb->controller, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
+
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+
+	/*
+	 * REVISIT: for high bandwidth, MUSB_TXCSR_P_INCOMPTX
+	 * probably rates reporting as a host error.
+	 */
+	if (csr & MUSB_TXCSR_P_SENTSTALL) {
+		csr |=	MUSB_TXCSR_P_WZC_BITS;
+		csr &= ~MUSB_TXCSR_P_SENTSTALL;
+		musb_writew(epio, MUSB_TXCSR, csr);
+		return;
+	}
+
+	if (csr & MUSB_TXCSR_P_UNDERRUN) {
+		/* We NAKed, no big deal... little reason to care. */
+		csr |=	 MUSB_TXCSR_P_WZC_BITS;
+		csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
+		musb_writew(epio, MUSB_TXCSR, csr);
+		dev_vdbg(musb->controller, "underrun on ep%d, req %p\n",
+				epnum, request);
+	}
+
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		/*
+		 * SHOULD NOT HAPPEN... has with CPPI though, after
+		 * changing SENDSTALL (and other cases); harmless?
+		 */
+		dev_dbg(musb->controller, "%s dma still busy?\n", musb_ep->end_point.name);
+		return;
+	}
+
+	if (request) {
+		u8	is_dma = 0;
+
+		if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
+			is_dma = 1;
+			csr |= MUSB_TXCSR_P_WZC_BITS;
+			csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN |
+				 MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET);
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* Ensure writebuffer is empty. */
+			csr = musb_readw(epio, MUSB_TXCSR);
+			request->actual += musb_ep->dma->actual_len;
+			dev_dbg(musb->controller, "TXCSR%d %04x, DMA off, len %zu, req %p\n",
+				epnum, csr, musb_ep->dma->actual_len, request);
+		}
+
+		/*
+		 * First, maybe a terminating short packet. Some DMA
+		 * engines might handle this by themselves.
+		 */
+		if ((request->zero && request->length
+			&& (request->length % musb_ep->packet_sz == 0)
+			&& (request->actual == request->length))
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
+			|| (is_dma && (!dma->desired_mode ||
+				(request->actual &
+					(musb_ep->packet_sz - 1))))
+#endif
+		) {
+			/*
+			 * On DMA completion, FIFO may not be
+			 * available yet...
+			 */
+			if (csr & MUSB_TXCSR_TXPKTRDY)
+				return;
+
+			dev_dbg(musb->controller, "sending zero pkt\n");
+			musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
+					| MUSB_TXCSR_TXPKTRDY);
+			request->zero = 0;
+		}
+
+		if (request->actual == request->length) {
+			musb_g_giveback(musb_ep, request, 0);
+			/*
+			 * In the giveback function the MUSB lock is
+			 * released and acquired after sometime. During
+			 * this time period the INDEX register could get
+			 * changed by the gadget_queue function especially
+			 * on SMP systems. Reselect the INDEX to be sure
+			 * we are reading/modifying the right registers
+			 */
+			musb_ep_select(mbase, epnum);
+			req = musb_ep->desc ? next_request(musb_ep) : NULL;
+			if (!req) {
+				dev_dbg(musb->controller, "%s idle now\n",
+					musb_ep->end_point.name);
+				return;
+			}
+		}
+
+		txstate(musb, req);
+	}
+}
+
+/* ------------------------------------------------------------ */
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral rx (OUT) using Mentor DMA works as follows:
+	- Only mode 0 is used.
+
+	- Request is queued by the gadget class driver.
+		-> if queue was previously empty, rxstate()
+
+	- Host sends OUT token which causes an endpoint interrupt
+	  /\      -> RxReady
+	  |	      -> if request queued, call rxstate
+	  |		/\	-> setup DMA
+	  |		|	     -> DMA interrupt on completion
+	  |		|		-> RxReady
+	  |		|		      -> stop DMA
+	  |		|		      -> ack the read
+	  |		|		      -> if data recd = max expected
+	  |		|				by the request, or host
+	  |		|				sent a short packet,
+	  |		|				complete the request,
+	  |		|				and start the next one.
+	  |		|_____________________________________|
+	  |					 else just wait for the host
+	  |					    to send the next OUT token.
+	  |__________________________________________________|
+
+ * Non-Mentor DMA engines can of course work differently.
+ */
+
+#endif
+
+/*
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void rxstate(struct musb *musb, struct musb_request *req)
+{
+	const u8		epnum = req->epnum;
+	struct usb_request	*request = &req->request;
+	struct musb_ep		*musb_ep;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	unsigned		fifo_count = 0;
+	u16			len;
+	u16			csr = musb_readw(epio, MUSB_RXCSR);
+	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
+	u8			use_mode_1;
+
+	if (hw_ep->is_shared_fifo)
+		musb_ep = &hw_ep->ep_in;
+	else
+		musb_ep = &hw_ep->ep_out;
+
+	len = musb_ep->packet_sz;
+
+	/* Check if EP is disabled */
+	if (!musb_ep->desc) {
+		dev_dbg(musb->controller, "ep:%s disabled - ignore request\n",
+						musb_ep->end_point.name);
+		return;
+	}
+
+	/* We shouldn't get here while DMA is active, but we do... */
+	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+		dev_dbg(musb->controller, "DMA pending...\n");
+		return;
+	}
+
+	if (csr & MUSB_RXCSR_P_SENDSTALL) {
+		dev_dbg(musb->controller, "%s stalling, RXCSR %04x\n",
+		    musb_ep->end_point.name, csr);
+		return;
+	}
+
+	if (is_cppi_enabled() && is_buffer_mapped(req)) {
+		struct dma_controller	*c = musb->dma_controller;
+		struct dma_channel	*channel = musb_ep->dma;
+
+		/* NOTE:  CPPI won't actually stop advancing the DMA
+		 * queue after short packet transfers, so this is almost
+		 * always going to run as IRQ-per-packet DMA so that
+		 * faults will be handled correctly.
+		 */
+		if (c->channel_program(channel,
+				musb_ep->packet_sz,
+				!request->short_not_ok,
+				request->dma + request->actual,
+				request->length - request->actual)) {
+
+			/* make sure that if an rxpkt arrived after the irq,
+			 * the cppi engine will be ready to take it as soon
+			 * as DMA is enabled
+			 */
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR
+					| MUSB_RXCSR_DMAMODE);
+			csr |= MUSB_RXCSR_DMAENAB | MUSB_RXCSR_P_WZC_BITS;
+			musb_writew(epio, MUSB_RXCSR, csr);
+			return;
+		}
+	}
+
+	if (csr & MUSB_RXCSR_RXPKTRDY) {
+		len = musb_readw(epio, MUSB_RXCOUNT);
+
+		/*
+		 * Enable Mode 1 on RX transfers only when short_not_ok flag
+		 * is set. Currently short_not_ok flag is set only from
+		 * file_storage and f_mass_storage drivers
+		 */
+
+		if (request->short_not_ok && len == musb_ep->packet_sz)
+			use_mode_1 = 1;
+		else
+			use_mode_1 = 0;
+
+		if (request->actual < request->length) {
+#ifdef CONFIG_USB_INVENTRA_DMA
+			if (is_buffer_mapped(req)) {
+				struct dma_controller	*c;
+				struct dma_channel	*channel;
+				int			use_dma = 0;
+
+				c = musb->dma_controller;
+				channel = musb_ep->dma;
+
+	/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+	 * mode 0 only. So we do not get endpoint interrupts due to DMA
+	 * completion. We only get interrupts from DMA controller.
+	 *
+	 * We could operate in DMA mode 1 if we knew the size of the tranfer
+	 * in advance. For mass storage class, request->length = what the host
+	 * sends, so that'd work.  But for pretty much everything else,
+	 * request->length is routinely more than what the host sends. For
+	 * most these gadgets, end of is signified either by a short packet,
+	 * or filling the last byte of the buffer.  (Sending extra data in
+	 * that last pckate should trigger an overflow fault.)  But in mode 1,
+	 * we don't get DMA completion interrupt for short packets.
+	 *
+	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+	 * to get endpoint interrupt on every DMA req, but that didn't seem
+	 * to work reliably.
+	 *
+	 * REVISIT an updated g_file_storage can set req->short_not_ok, which
+	 * then becomes usable as a runtime "use mode 1" hint...
+	 */
+
+				/* Experimental: Mode1 works with mass storage use cases */
+				if (use_mode_1) {
+					csr |= MUSB_RXCSR_AUTOCLEAR;
+					musb_writew(epio, MUSB_RXCSR, csr);
+					csr |= MUSB_RXCSR_DMAENAB;
+					musb_writew(epio, MUSB_RXCSR, csr);
+
+					/*
+					 * this special sequence (enabling and then
+					 * disabling MUSB_RXCSR_DMAMODE) is required
+					 * to get DMAReq to activate
+					 */
+					musb_writew(epio, MUSB_RXCSR,
+						csr | MUSB_RXCSR_DMAMODE);
+					musb_writew(epio, MUSB_RXCSR, csr);
+
+				} else {
+					if (!musb_ep->hb_mult &&
+						musb_ep->hw_ep->rx_double_buffered)
+						csr |= MUSB_RXCSR_AUTOCLEAR;
+					csr |= MUSB_RXCSR_DMAENAB;
+					musb_writew(epio, MUSB_RXCSR, csr);
+				}
+
+				if (request->actual < request->length) {
+					int transfer_size = 0;
+					if (use_mode_1) {
+						transfer_size = min(request->length - request->actual,
+								channel->max_len);
+						musb_ep->dma->desired_mode = 1;
+					} else {
+						transfer_size = min(request->length - request->actual,
+								(unsigned)len);
+						musb_ep->dma->desired_mode = 0;
+					}
+
+					use_dma = c->channel_program(
+							channel,
+							musb_ep->packet_sz,
+							channel->desired_mode,
+							request->dma
+							+ request->actual,
+							transfer_size);
+				}
+
+				if (use_dma)
+					return;
+			}
+#elif defined(CONFIG_USB_UX500_DMA)
+			if ((is_buffer_mapped(req)) &&
+				(request->actual < request->length)) {
+
+				struct dma_controller *c;
+				struct dma_channel *channel;
+				int transfer_size = 0;
+
+				c = musb->dma_controller;
+				channel = musb_ep->dma;
+
+				/* In case first packet is short */
+				if (len < musb_ep->packet_sz)
+					transfer_size = len;
+				else if (request->short_not_ok)
+					transfer_size =	min(request->length -
+							request->actual,
+							channel->max_len);
+				else
+					transfer_size = min(request->length -
+							request->actual,
+							(unsigned)len);
+
+				csr &= ~MUSB_RXCSR_DMAMODE;
+				csr |= (MUSB_RXCSR_DMAENAB |
+					MUSB_RXCSR_AUTOCLEAR);
+
+				musb_writew(epio, MUSB_RXCSR, csr);
+
+				if (transfer_size <= musb_ep->packet_sz) {
+					musb_ep->dma->desired_mode = 0;
+				} else {
+					musb_ep->dma->desired_mode = 1;
+					/* Mode must be set after DMAENAB */
+					csr |= MUSB_RXCSR_DMAMODE;
+					musb_writew(epio, MUSB_RXCSR, csr);
+				}
+
+				if (c->channel_program(channel,
+							musb_ep->packet_sz,
+							channel->desired_mode,
+							request->dma
+							+ request->actual,
+							transfer_size))
+
+					return;
+			}
+#endif	/* Mentor's DMA */
+
+			fifo_count = request->length - request->actual;
+			dev_dbg(musb->controller, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
+					musb_ep->end_point.name,
+					len, fifo_count,
+					musb_ep->packet_sz);
+
+			fifo_count = min_t(unsigned, len, fifo_count);
+
+#ifdef	CONFIG_USB_TUSB_OMAP_DMA
+			if (tusb_dma_omap() && is_buffer_mapped(req)) {
+				struct dma_controller *c = musb->dma_controller;
+				struct dma_channel *channel = musb_ep->dma;
+				u32 dma_addr = request->dma + request->actual;
+				int ret;
+
+				ret = c->channel_program(channel,
+						musb_ep->packet_sz,
+						channel->desired_mode,
+						dma_addr,
+						fifo_count);
+				if (ret)
+					return;
+			}
+#endif
+			/*
+			 * Unmap the dma buffer back to cpu if dma channel
+			 * programming fails. This buffer is mapped if the
+			 * channel allocation is successful
+			 */
+			 if (is_buffer_mapped(req)) {
+				unmap_dma_buffer(req, musb);
+
+				/*
+				 * Clear DMAENAB and AUTOCLEAR for the
+				 * PIO mode transfer
+				 */
+				csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+				musb_writew(epio, MUSB_RXCSR, csr);
+			}
+
+			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
+					(request->buf + request->actual));
+			request->actual += fifo_count;
+
+			/* REVISIT if we left anything in the fifo, flush
+			 * it and report -EOVERFLOW
+			 */
+
+			/* ack the read! */
+			csr |= MUSB_RXCSR_P_WZC_BITS;
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+	}
+
+	/* reach the end or short packet detected */
+	if (request->actual == request->length || len < musb_ep->packet_sz)
+		musb_g_giveback(musb_ep, request, 0);
+}
+
+/*
+ * Data ready for a request; called from IRQ
+ */
+void musb_g_rx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct musb_request	*req;
+	struct usb_request	*request;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
+
+	if (hw_ep->is_shared_fifo)
+		musb_ep = &hw_ep->ep_in;
+	else
+		musb_ep = &hw_ep->ep_out;
+
+	musb_ep_select(mbase, epnum);
+
+	req = next_request(musb_ep);
+	if (!req)
+		return;
+
+	request = &req->request;
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+
+	dev_dbg(musb->controller, "<== %s, rxcsr %04x%s %p\n", musb_ep->end_point.name,
+			csr, dma ? " (dma)" : "", request);
+
+	if (csr & MUSB_RXCSR_P_SENTSTALL) {
+		csr |= MUSB_RXCSR_P_WZC_BITS;
+		csr &= ~MUSB_RXCSR_P_SENTSTALL;
+		musb_writew(epio, MUSB_RXCSR, csr);
+		return;
+	}
+
+	if (csr & MUSB_RXCSR_P_OVERRUN) {
+		/* csr |= MUSB_RXCSR_P_WZC_BITS; */
+		csr &= ~MUSB_RXCSR_P_OVERRUN;
+		musb_writew(epio, MUSB_RXCSR, csr);
+
+		dev_dbg(musb->controller, "%s iso overrun on %p\n", musb_ep->name, request);
+		if (request->status == -EINPROGRESS)
+			request->status = -EOVERFLOW;
+	}
+	if (csr & MUSB_RXCSR_INCOMPRX) {
+		/* REVISIT not necessarily an error */
+		dev_dbg(musb->controller, "%s, incomprx\n", musb_ep->end_point.name);
+	}
+
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		/* "should not happen"; likely RXPKTRDY pending for DMA */
+		dev_dbg(musb->controller, "%s busy, csr %04x\n",
+			musb_ep->end_point.name, csr);
+		return;
+	}
+
+	if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
+		csr &= ~(MUSB_RXCSR_AUTOCLEAR
+				| MUSB_RXCSR_DMAENAB
+				| MUSB_RXCSR_DMAMODE);
+		musb_writew(epio, MUSB_RXCSR,
+			MUSB_RXCSR_P_WZC_BITS | csr);
+
+		request->actual += musb_ep->dma->actual_len;
+
+		dev_dbg(musb->controller, "RXCSR%d %04x, dma off, %04x, len %zu, req %p\n",
+			epnum, csr,
+			musb_readw(epio, MUSB_RXCSR),
+			musb_ep->dma->actual_len, request);
+
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) || \
+	defined(CONFIG_USB_UX500_DMA)
+		/* Autoclear doesn't clear RxPktRdy for short packets */
+		if ((dma->desired_mode == 0 && !hw_ep->rx_double_buffered)
+				|| (dma->actual_len
+					& (musb_ep->packet_sz - 1))) {
+			/* ack the read! */
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+
+		/* incomplete, and not short? wait for next IN packet */
+		if ((request->actual < request->length)
+				&& (musb_ep->dma->actual_len
+					== musb_ep->packet_sz)) {
+			/* In double buffer case, continue to unload fifo if
+ 			 * there is Rx packet in FIFO.
+ 			 **/
+			csr = musb_readw(epio, MUSB_RXCSR);
+			if ((csr & MUSB_RXCSR_RXPKTRDY) &&
+				hw_ep->rx_double_buffered)
+				goto exit;
+			return;
+		}
+#endif
+		musb_g_giveback(musb_ep, request, 0);
+		/*
+		 * In the giveback function the MUSB lock is
+		 * released and acquired after sometime. During
+		 * this time period the INDEX register could get
+		 * changed by the gadget_queue function especially
+		 * on SMP systems. Reselect the INDEX to be sure
+		 * we are reading/modifying the right registers
+		 */
+		musb_ep_select(mbase, epnum);
+
+		req = next_request(musb_ep);
+		if (!req)
+			return;
+	}
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) || \
+	defined(CONFIG_USB_UX500_DMA)
+exit:
+#endif
+	/* Analyze request */
+	rxstate(musb, req);
+}
+
+/* ------------------------------------------------------------ */
+
+static int musb_gadget_enable(struct usb_ep *ep,
+			const struct usb_endpoint_descriptor *desc)
+{
+	unsigned long		flags;
+	struct musb_ep		*musb_ep;
+	struct musb_hw_ep	*hw_ep;
+	void __iomem		*regs;
+	struct musb		*musb;
+	void __iomem	*mbase;
+	u8		epnum;
+	u16		csr;
+	unsigned	tmp;
+	int		status = -EINVAL;
+
+	if (!ep || !desc)
+		return -EINVAL;
+
+	musb_ep = to_musb_ep(ep);
+	hw_ep = musb_ep->hw_ep;
+	regs = hw_ep->regs;
+	musb = musb_ep->musb;
+	mbase = musb->mregs;
+	epnum = musb_ep->current_epnum;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb_ep->desc) {
+		status = -EBUSY;
+		goto fail;
+	}
+	musb_ep->type = usb_endpoint_type(desc);
+
+	/* check direction and (later) maxpacket size against endpoint */
+	if (usb_endpoint_num(desc) != epnum)
+		goto fail;
+
+	/* REVISIT this rules out high bandwidth periodic transfers */
+	tmp = usb_endpoint_maxp(desc);
+	if (tmp & ~0x07ff) {
+		int ok;
+
+		if (usb_endpoint_dir_in(desc))
+			ok = musb->hb_iso_tx;
+		else
+			ok = musb->hb_iso_rx;
+
+		if (!ok) {
+			dev_dbg(musb->controller, "no support for high bandwidth ISO\n");
+			goto fail;
+		}
+		musb_ep->hb_mult = (tmp >> 11) & 3;
+	} else {
+		musb_ep->hb_mult = 0;
+	}
+
+	musb_ep->packet_sz = tmp & 0x7ff;
+	tmp = musb_ep->packet_sz * (musb_ep->hb_mult + 1);
+
+	/* enable the interrupts for the endpoint, set the endpoint
+	 * packet size (or fail), set the mode, clear the fifo
+	 */
+	musb_ep_select(mbase, epnum);
+	if (usb_endpoint_dir_in(desc)) {
+		u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 1;
+		if (!musb_ep->is_in)
+			goto fail;
+
+		if (tmp > hw_ep->max_packet_sz_tx) {
+			dev_dbg(musb->controller, "packet size beyond hardware FIFO size\n");
+			goto fail;
+		}
+
+		int_txe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+		/* REVISIT if can_bulk_split(), use by updating "tmp";
+		 * likewise high bandwidth periodic tx
+		 */
+		/* Set TXMAXP with the FIFO size of the endpoint
+		 * to disable double buffering mode.
+		 */
+		if (musb->double_buffer_not_ok)
+			musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
+		else
+			musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
+					| (musb_ep->hb_mult << 11));
+
+		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
+		if (musb_readw(regs, MUSB_TXCSR)
+				& MUSB_TXCSR_FIFONOTEMPTY)
+			csr |= MUSB_TXCSR_FLUSHFIFO;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_TXCSR_P_ISO;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_TXCSR, csr);
+		/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+		musb_writew(regs, MUSB_TXCSR, csr);
+
+	} else {
+		u16 int_rxe = musb_readw(mbase, MUSB_INTRRXE);
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 0;
+		if (musb_ep->is_in)
+			goto fail;
+
+		if (tmp > hw_ep->max_packet_sz_rx) {
+			dev_dbg(musb->controller, "packet size beyond hardware FIFO size\n");
+			goto fail;
+		}
+
+		int_rxe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRRXE, int_rxe);
+
+		/* REVISIT if can_bulk_combine() use by updating "tmp"
+		 * likewise high bandwidth periodic rx
+		 */
+		/* Set RXMAXP with the FIFO size of the endpoint
+		 * to disable double buffering mode.
+		 */
+		if (musb->double_buffer_not_ok)
+			musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
+		else
+			musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
+					| (musb_ep->hb_mult << 11));
+
+		/* force shared fifo to OUT-only mode */
+		if (hw_ep->is_shared_fifo) {
+			csr = musb_readw(regs, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
+			musb_writew(regs, MUSB_TXCSR, csr);
+		}
+
+		csr = MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_CLRDATATOG;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_RXCSR_P_ISO;
+		else if (musb_ep->type == USB_ENDPOINT_XFER_INT)
+			csr |= MUSB_RXCSR_DISNYET;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_RXCSR, csr);
+		musb_writew(regs, MUSB_RXCSR, csr);
+	}
+
+	/* NOTE:  all the I/O code _should_ work fine without DMA, in case
+	 * for some reason you run out of channels here.
+	 */
+	if (is_dma_capable() && musb->dma_controller) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep->dma = c->channel_alloc(c, hw_ep,
+				(desc->bEndpointAddress & USB_DIR_IN));
+	} else
+		musb_ep->dma = NULL;
+
+	musb_ep->desc = desc;
+	musb_ep->busy = 0;
+	musb_ep->wedged = 0;
+	status = 0;
+
+	pr_debug("%s periph: enabled %s for %s %s, %smaxpacket %d\n",
+			musb_driver_name, musb_ep->end_point.name,
+			({ char *s; switch (musb_ep->type) {
+			case USB_ENDPOINT_XFER_BULK:	s = "bulk"; break;
+			case USB_ENDPOINT_XFER_INT:	s = "int"; break;
+			default:			s = "iso"; break;
+			}; s; }),
+			musb_ep->is_in ? "IN" : "OUT",
+			musb_ep->dma ? "dma, " : "",
+			musb_ep->packet_sz);
+
+	schedule_work(&musb->irq_work);
+
+fail:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Disable an endpoint flushing all requests queued.
+ */
+static int musb_gadget_disable(struct usb_ep *ep)
+{
+	unsigned long	flags;
+	struct musb	*musb;
+	u8		epnum;
+	struct musb_ep	*musb_ep;
+	void __iomem	*epio;
+	int		status = 0;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+	epnum = musb_ep->current_epnum;
+	epio = musb->endpoints[epnum].regs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(musb->mregs, epnum);
+
+	/* zero the endpoint sizes */
+	if (musb_ep->is_in) {
+		u16 int_txe = musb_readw(musb->mregs, MUSB_INTRTXE);
+		int_txe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRTXE, int_txe);
+		musb_writew(epio, MUSB_TXMAXP, 0);
+	} else {
+		u16 int_rxe = musb_readw(musb->mregs, MUSB_INTRRXE);
+		int_rxe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRRXE, int_rxe);
+		musb_writew(epio, MUSB_RXMAXP, 0);
+	}
+
+	musb_ep->desc = NULL;
+#ifndef __UBOOT__
+	musb_ep->end_point.desc = NULL;
+#endif
+
+	/* abort all pending DMA and requests */
+	nuke(musb_ep, -ESHUTDOWN);
+
+	schedule_work(&musb->irq_work);
+
+	spin_unlock_irqrestore(&(musb->lock), flags);
+
+	dev_dbg(musb->controller, "%s\n", musb_ep->end_point.name);
+
+	return status;
+}
+
+/*
+ * Allocate a request for an endpoint.
+ * Reused by ep0 code.
+ */
+struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct musb		*musb = musb_ep->musb;
+	struct musb_request	*request = NULL;
+
+	request = kzalloc(sizeof *request, gfp_flags);
+	if (!request) {
+		dev_dbg(musb->controller, "not enough memory\n");
+		return NULL;
+	}
+
+	request->request.dma = DMA_ADDR_INVALID;
+	request->epnum = musb_ep->current_epnum;
+	request->ep = musb_ep;
+
+	return &request->request;
+}
+
+/*
+ * Free a request
+ * Reused by ep0 code.
+ */
+void musb_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+	kfree(to_musb_request(req));
+}
+
+static LIST_HEAD(buffers);
+
+struct free_record {
+	struct list_head	list;
+	struct device		*dev;
+	unsigned		bytes;
+	dma_addr_t		dma;
+};
+
+/*
+ * Context: controller locked, IRQs blocked.
+ */
+void musb_ep_restart(struct musb *musb, struct musb_request *req)
+{
+	dev_dbg(musb->controller, "<== %s request %p len %u on hw_ep%d\n",
+		req->tx ? "TX/IN" : "RX/OUT",
+		&req->request, req->request.length, req->epnum);
+
+	musb_ep_select(musb->mregs, req->epnum);
+	if (req->tx)
+		txstate(musb, req);
+	else
+		rxstate(musb, req);
+}
+
+static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
+			gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep;
+	struct musb_request	*request;
+	struct musb		*musb;
+	int			status = 0;
+	unsigned long		lockflags;
+
+	if (!ep || !req)
+		return -EINVAL;
+	if (!req->buf)
+		return -ENODATA;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+
+	request = to_musb_request(req);
+	request->musb = musb;
+
+	if (request->ep != musb_ep)
+		return -EINVAL;
+
+	dev_dbg(musb->controller, "<== to %s request=%p\n", ep->name, req);
+
+	/* request is mine now... */
+	request->request.actual = 0;
+	request->request.status = -EINPROGRESS;
+	request->epnum = musb_ep->current_epnum;
+	request->tx = musb_ep->is_in;
+
+	map_dma_buffer(request, musb, musb_ep);
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	/* don't queue if the ep is down */
+	if (!musb_ep->desc) {
+		dev_dbg(musb->controller, "req %p queued to %s while ep %s\n",
+				req, ep->name, "disabled");
+		status = -ESHUTDOWN;
+		goto cleanup;
+	}
+
+	/* add request to the list */
+	list_add_tail(&request->list, &musb_ep->req_list);
+
+	/* it this is the head of the queue, start i/o ... */
+	if (!musb_ep->busy && &request->list == musb_ep->req_list.next)
+		musb_ep_restart(musb, request);
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	return status;
+}
+
+static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct musb_request	*req = to_musb_request(request);
+	struct musb_request	*r;
+	unsigned long		flags;
+	int			status = 0;
+	struct musb		*musb = musb_ep->musb;
+
+	if (!ep || !request || to_musb_request(request)->ep != musb_ep)
+		return -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	list_for_each_entry(r, &musb_ep->req_list, list) {
+		if (r == req)
+			break;
+	}
+	if (r != req) {
+		dev_dbg(musb->controller, "request %p not queued to %s\n", request, ep->name);
+		status = -EINVAL;
+		goto done;
+	}
+
+	/* if the hardware doesn't have the request, easy ... */
+	if (musb_ep->req_list.next != &req->list || musb_ep->busy)
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+
+	/* ... else abort the dma transfer ... */
+	else if (is_dma_capable() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep_select(musb->mregs, musb_ep->current_epnum);
+		if (c->channel_abort)
+			status = c->channel_abort(musb_ep->dma);
+		else
+			status = -EBUSY;
+		if (status == 0)
+			musb_g_giveback(musb_ep, request, -ECONNRESET);
+	} else {
+		/* NOTE: by sticking to easily tested hardware/driver states,
+		 * we leave counting of in-flight packets imprecise.
+		 */
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+	}
+
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
+ * data but will queue requests.
+ *
+ * exported to ep0 code
+ */
+static int musb_gadget_set_halt(struct usb_ep *ep, int value)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	u8			epnum = musb_ep->current_epnum;
+	struct musb		*musb = musb_ep->musb;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	void __iomem		*mbase;
+	unsigned long		flags;
+	u16			csr;
+	struct musb_request	*request;
+	int			status = 0;
+
+	if (!ep)
+		return -EINVAL;
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if ((USB_ENDPOINT_XFER_ISOC == musb_ep->type)) {
+		status = -EINVAL;
+		goto done;
+	}
+
+	musb_ep_select(mbase, epnum);
+
+	request = next_request(musb_ep);
+	if (value) {
+		if (request) {
+			dev_dbg(musb->controller, "request in progress, cannot halt %s\n",
+			    ep->name);
+			status = -EAGAIN;
+			goto done;
+		}
+		/* Cannot portably stall with non-empty FIFO */
+		if (musb_ep->is_in) {
+			csr = musb_readw(epio, MUSB_TXCSR);
+			if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+				dev_dbg(musb->controller, "FIFO busy, cannot halt %s\n", ep->name);
+				status = -EAGAIN;
+				goto done;
+			}
+		}
+	} else
+		musb_ep->wedged = 0;
+
+	/* set/clear the stall and toggle bits */
+	dev_dbg(musb->controller, "%s: %s stall\n", ep->name, value ? "set" : "clear");
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr |= MUSB_TXCSR_P_WZC_BITS
+			| MUSB_TXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_TXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_TXCSR_P_SENDSTALL
+				| MUSB_TXCSR_P_SENTSTALL);
+		csr &= ~MUSB_TXCSR_TXPKTRDY;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_P_WZC_BITS
+			| MUSB_RXCSR_FLUSHFIFO
+			| MUSB_RXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_RXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_RXCSR_P_SENDSTALL
+				| MUSB_RXCSR_P_SENTSTALL);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	/* maybe start the first request in the queue */
+	if (!musb_ep->busy && !value && request) {
+		dev_dbg(musb->controller, "restarting the request\n");
+		musb_ep_restart(musb, request);
+	}
+
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+#ifndef __UBOOT__
+/*
+ * Sets the halt feature with the clear requests ignored
+ */
+static int musb_gadget_set_wedge(struct usb_ep *ep)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+
+	if (!ep)
+		return -EINVAL;
+
+	musb_ep->wedged = 1;
+
+	return usb_ep_set_halt(ep);
+}
+#endif
+
+static int musb_gadget_fifo_status(struct usb_ep *ep)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	void __iomem		*epio = musb_ep->hw_ep->regs;
+	int			retval = -EINVAL;
+
+	if (musb_ep->desc && !musb_ep->is_in) {
+		struct musb		*musb = musb_ep->musb;
+		int			epnum = musb_ep->current_epnum;
+		void __iomem		*mbase = musb->mregs;
+		unsigned long		flags;
+
+		spin_lock_irqsave(&musb->lock, flags);
+
+		musb_ep_select(mbase, epnum);
+		/* FIXME return zero unless RXPKTRDY is set */
+		retval = musb_readw(epio, MUSB_RXCOUNT);
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+	}
+	return retval;
+}
+
+static void musb_gadget_fifo_flush(struct usb_ep *ep)
+{
+	struct musb_ep	*musb_ep = to_musb_ep(ep);
+	struct musb	*musb = musb_ep->musb;
+	u8		epnum = musb_ep->current_epnum;
+	void __iomem	*epio = musb->endpoints[epnum].regs;
+	void __iomem	*mbase;
+	unsigned long	flags;
+	u16		csr, int_txe;
+
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(mbase, (u8) epnum);
+
+	/* disable interrupts */
+	int_txe = musb_readw(mbase, MUSB_INTRTXE);
+	musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+			csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
+			/*
+			 * Setting both TXPKTRDY and FLUSHFIFO makes controller
+			 * to interrupt current FIFO loading, but not flushing
+			 * the already loaded ones.
+			 */
+			csr &= ~MUSB_TXCSR_TXPKTRDY;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+			musb_writew(epio, MUSB_TXCSR, csr);
+		}
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_P_WZC_BITS;
+		musb_writew(epio, MUSB_RXCSR, csr);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	/* re-enable interrupt */
+	musb_writew(mbase, MUSB_INTRTXE, int_txe);
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static const struct usb_ep_ops musb_ep_ops = {
+	.enable		= musb_gadget_enable,
+	.disable	= musb_gadget_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_gadget_queue,
+	.dequeue	= musb_gadget_dequeue,
+	.set_halt	= musb_gadget_set_halt,
+#ifndef __UBOOT__
+	.set_wedge	= musb_gadget_set_wedge,
+#endif
+	.fifo_status	= musb_gadget_fifo_status,
+	.fifo_flush	= musb_gadget_fifo_flush
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int musb_gadget_get_frame(struct usb_gadget *gadget)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	return (int)musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_gadget_wakeup(struct usb_gadget *gadget)
+{
+#ifndef __UBOOT__
+	struct musb	*musb = gadget_to_musb(gadget);
+	void __iomem	*mregs = musb->mregs;
+	unsigned long	flags;
+	int		status = -EINVAL;
+	u8		power, devctl;
+	int		retries;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv->state) {
+	case OTG_STATE_B_PERIPHERAL:
+		/* NOTE:  OTG state machine doesn't include B_SUSPENDED;
+		 * that's part of the standard usb 1.1 state machine, and
+		 * doesn't affect OTG transitions.
+		 */
+		if (musb->may_wakeup && musb->is_suspended)
+			break;
+		goto done;
+	case OTG_STATE_B_IDLE:
+		/* Start SRP ... OTG not required. */
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		dev_dbg(musb->controller, "Sending SRP: devctl: %02x\n", devctl);
+		devctl |= MUSB_DEVCTL_SESSION;
+		musb_writeb(mregs, MUSB_DEVCTL, devctl);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		retries = 100;
+		while (!(devctl & MUSB_DEVCTL_SESSION)) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+		retries = 10000;
+		while (devctl & MUSB_DEVCTL_SESSION) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+		otg_start_srp(musb->xceiv->otg);
+		spin_lock_irqsave(&musb->lock, flags);
+
+		/* Block idling for at least 1s */
+		musb_platform_try_idle(musb,
+			jiffies + msecs_to_jiffies(1 * HZ));
+
+		status = 0;
+		goto done;
+	default:
+		dev_dbg(musb->controller, "Unhandled wake: %s\n",
+			otg_state_string(musb->xceiv->state));
+		goto done;
+	}
+
+	status = 0;
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power |= MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+	dev_dbg(musb->controller, "issue wakeup\n");
+
+	/* FIXME do this next chunk in a timer callback, no udelay */
+	mdelay(2);
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power &= ~MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+#else
+	return 0;
+#endif
+}
+
+static int
+musb_gadget_set_self_powered(struct usb_gadget *gadget, int is_selfpowered)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	musb->is_self_powered = !!is_selfpowered;
+	return 0;
+}
+
+static void musb_pullup(struct musb *musb, int is_on)
+{
+	u8 power;
+
+	power = musb_readb(musb->mregs, MUSB_POWER);
+	if (is_on)
+		power |= MUSB_POWER_SOFTCONN;
+	else
+		power &= ~MUSB_POWER_SOFTCONN;
+
+	/* FIXME if on, HdrcStart; if off, HdrcStop */
+
+	dev_dbg(musb->controller, "gadget D+ pullup %s\n",
+		is_on ? "on" : "off");
+	musb_writeb(musb->mregs, MUSB_POWER, power);
+}
+
+#if 0
+static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	dev_dbg(musb->controller, "<= %s =>\n", __func__);
+
+	/*
+	 * FIXME iff driver's softconnect flag is set (as it is during probe,
+	 * though that can clear it), just musb_pullup().
+	 */
+
+	return -EINVAL;
+}
+#endif
+
+static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+#ifndef __UBOOT__
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	if (!musb->xceiv->set_power)
+		return -EOPNOTSUPP;
+	return usb_phy_set_power(musb->xceiv, mA);
+#else
+	return 0;
+#endif
+}
+
+static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+	unsigned long	flags;
+
+	is_on = !!is_on;
+
+	pm_runtime_get_sync(musb->controller);
+
+	/* NOTE: this assumes we are sensing vbus; we'd rather
+	 * not pullup unless the B-session is active.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (is_on != musb->softconnect) {
+		musb->softconnect = is_on;
+		musb_pullup(musb, is_on);
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	pm_runtime_put(musb->controller);
+
+	return 0;
+}
+
+#ifndef __UBOOT__
+static int musb_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int musb_gadget_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+#endif
+
+static const struct usb_gadget_ops musb_gadget_operations = {
+	.get_frame		= musb_gadget_get_frame,
+	.wakeup			= musb_gadget_wakeup,
+	.set_selfpowered	= musb_gadget_set_self_powered,
+	/* .vbus_session		= musb_gadget_vbus_session, */
+	.vbus_draw		= musb_gadget_vbus_draw,
+	.pullup			= musb_gadget_pullup,
+#ifndef __UBOOT__
+	.udc_start		= musb_gadget_start,
+	.udc_stop		= musb_gadget_stop,
+#endif
+};
+
+/* ----------------------------------------------------------------------- */
+
+/* Registration */
+
+/* Only this registration code "knows" the rule (from USB standards)
+ * about there being only one external upstream port.  It assumes
+ * all peripheral ports are external...
+ */
+
+#ifndef __UBOOT__
+static void musb_gadget_release(struct device *dev)
+{
+	/* kref_put(WHAT) */
+	dev_dbg(dev, "%s\n", __func__);
+}
+#endif
+
+
+static void __devinit
+init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
+{
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+
+	memset(ep, 0, sizeof *ep);
+
+	ep->current_epnum = epnum;
+	ep->musb = musb;
+	ep->hw_ep = hw_ep;
+	ep->is_in = is_in;
+
+	INIT_LIST_HEAD(&ep->req_list);
+
+	sprintf(ep->name, "ep%d%s", epnum,
+			(!epnum || hw_ep->is_shared_fifo) ? "" : (
+				is_in ? "in" : "out"));
+	ep->end_point.name = ep->name;
+	INIT_LIST_HEAD(&ep->end_point.ep_list);
+	if (!epnum) {
+		ep->end_point.maxpacket = 64;
+		ep->end_point.ops = &musb_g_ep0_ops;
+		musb->g.ep0 = &ep->end_point;
+	} else {
+		if (is_in)
+			ep->end_point.maxpacket = hw_ep->max_packet_sz_tx;
+		else
+			ep->end_point.maxpacket = hw_ep->max_packet_sz_rx;
+		ep->end_point.ops = &musb_ep_ops;
+		list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
+	}
+}
+
+/*
+ * Initialize the endpoints exposed to peripheral drivers, with backlinks
+ * to the rest of the driver state.
+ */
+static inline void __devinit musb_g_init_endpoints(struct musb *musb)
+{
+	u8			epnum;
+	struct musb_hw_ep	*hw_ep;
+	unsigned		count = 0;
+
+	/* initialize endpoint list just once */
+	INIT_LIST_HEAD(&(musb->g.ep_list));
+
+	for (epnum = 0, hw_ep = musb->endpoints;
+			epnum < musb->nr_endpoints;
+			epnum++, hw_ep++) {
+		if (hw_ep->is_shared_fifo /* || !epnum */) {
+			init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0);
+			count++;
+		} else {
+			if (hw_ep->max_packet_sz_tx) {
+				init_peripheral_ep(musb, &hw_ep->ep_in,
+							epnum, 1);
+				count++;
+			}
+			if (hw_ep->max_packet_sz_rx) {
+				init_peripheral_ep(musb, &hw_ep->ep_out,
+							epnum, 0);
+				count++;
+			}
+		}
+	}
+}
+
+/* called once during driver setup to initialize and link into
+ * the driver model; memory is zeroed.
+ */
+int __devinit musb_gadget_setup(struct musb *musb)
+{
+	int status;
+
+	/* REVISIT minor race:  if (erroneously) setting up two
+	 * musb peripherals at the same time, only the bus lock
+	 * is probably held.
+	 */
+
+	musb->g.ops = &musb_gadget_operations;
+#ifndef __UBOOT__
+	musb->g.max_speed = USB_SPEED_HIGH;
+#endif
+	musb->g.speed = USB_SPEED_UNKNOWN;
+
+#ifndef __UBOOT__
+	/* this "gadget" abstracts/virtualizes the controller */
+	dev_set_name(&musb->g.dev, "gadget");
+	musb->g.dev.parent = musb->controller;
+	musb->g.dev.dma_mask = musb->controller->dma_mask;
+	musb->g.dev.release = musb_gadget_release;
+#endif
+	musb->g.name = musb_driver_name;
+
+#ifndef __UBOOT__
+	if (is_otg_enabled(musb))
+		musb->g.is_otg = 1;
+#endif
+
+	musb_g_init_endpoints(musb);
+
+	musb->is_active = 0;
+	musb_platform_try_idle(musb, 0);
+
+#ifndef __UBOOT__
+	status = device_register(&musb->g.dev);
+	if (status != 0) {
+		put_device(&musb->g.dev);
+		return status;
+	}
+	status = usb_add_gadget_udc(musb->controller, &musb->g);
+	if (status)
+		goto err;
+#endif
+
+	return 0;
+#ifndef __UBOOT__
+err:
+	musb->g.dev.parent = NULL;
+	device_unregister(&musb->g.dev);
+	return status;
+#endif
+}
+
+void musb_gadget_cleanup(struct musb *musb)
+{
+#ifndef __UBOOT__
+	usb_del_gadget_udc(&musb->g);
+	if (musb->g.dev.parent)
+		device_unregister(&musb->g.dev);
+#endif
+}
+
+/*
+ * Register the gadget driver. Used by gadget drivers when
+ * registering themselves with the controller.
+ *
+ * -EINVAL something went wrong (not driver)
+ * -EBUSY another gadget is already using the controller
+ * -ENOMEM no memory to perform the operation
+ *
+ * @param driver the gadget driver
+ * @return <0 if error, 0 if everything is fine
+ */
+#ifndef __UBOOT__
+static int musb_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+#else
+int musb_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+#endif
+{
+	struct musb		*musb = gadget_to_musb(g);
+#ifndef __UBOOT__
+	struct usb_otg		*otg = musb->xceiv->otg;
+#endif
+	unsigned long		flags;
+	int			retval = -EINVAL;
+
+#ifndef __UBOOT__
+	if (driver->max_speed < USB_SPEED_HIGH)
+		goto err0;
+#endif
+
+	pm_runtime_get_sync(musb->controller);
+
+#ifndef __UBOOT__
+	dev_dbg(musb->controller, "registering driver %s\n", driver->function);
+#endif
+
+	musb->softconnect = 0;
+	musb->gadget_driver = driver;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb->is_active = 1;
+
+#ifndef __UBOOT__
+	otg_set_peripheral(otg, &musb->g);
+	musb->xceiv->state = OTG_STATE_B_IDLE;
+
+	/*
+	 * FIXME this ignores the softconnect flag.  Drivers are
+	 * allowed hold the peripheral inactive until for example
+	 * userspace hooks up printer hardware or DSP codecs, so
+	 * hosts only see fully functional devices.
+	 */
+
+	if (!is_otg_enabled(musb))
+#endif
+		musb_start(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+#ifndef __UBOOT__
+	if (is_otg_enabled(musb)) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
+
+		dev_dbg(musb->controller, "OTG startup...\n");
+
+		/* REVISIT:  funcall to other code, which also
+		 * handles power budgeting ... this way also
+		 * ensures HdrcStart is indirectly called.
+		 */
+		retval = usb_add_hcd(musb_to_hcd(musb), 0, 0);
+		if (retval < 0) {
+			dev_dbg(musb->controller, "add_hcd failed, %d\n", retval);
+			goto err2;
+		}
+
+		if ((musb->xceiv->last_event == USB_EVENT_ID)
+					&& otg->set_vbus)
+			otg_set_vbus(otg, 1);
+
+		hcd->self.uses_pio_for_control = 1;
+	}
+	if (musb->xceiv->last_event == USB_EVENT_NONE)
+		pm_runtime_put(musb->controller);
+#endif
+
+	return 0;
+
+#ifndef __UBOOT__
+err2:
+	if (!is_otg_enabled(musb))
+		musb_stop(musb);
+err0:
+	return retval;
+#endif
+}
+
+#ifndef __UBOOT__
+static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
+{
+	int			i;
+	struct musb_hw_ep	*hw_ep;
+
+	/* don't disconnect if it's not connected */
+	if (musb->g.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	else
+		musb->g.speed = USB_SPEED_UNKNOWN;
+
+	/* deactivate the hardware */
+	if (musb->softconnect) {
+		musb->softconnect = 0;
+		musb_pullup(musb, 0);
+	}
+	musb_stop(musb);
+
+	/* killing any outstanding requests will quiesce the driver;
+	 * then report disconnect
+	 */
+	if (driver) {
+		for (i = 0, hw_ep = musb->endpoints;
+				i < musb->nr_endpoints;
+				i++, hw_ep++) {
+			musb_ep_select(musb->mregs, i);
+			if (hw_ep->is_shared_fifo /* || !epnum */) {
+				nuke(&hw_ep->ep_in, -ESHUTDOWN);
+			} else {
+				if (hw_ep->max_packet_sz_tx)
+					nuke(&hw_ep->ep_in, -ESHUTDOWN);
+				if (hw_ep->max_packet_sz_rx)
+					nuke(&hw_ep->ep_out, -ESHUTDOWN);
+			}
+		}
+	}
+}
+
+/*
+ * Unregister the gadget driver. Used by gadget drivers when
+ * unregistering themselves from the controller.
+ *
+ * @param driver the gadget driver to unregister
+ */
+static int musb_gadget_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct musb	*musb = gadget_to_musb(g);
+	unsigned long	flags;
+
+	if (musb->xceiv->last_event == USB_EVENT_NONE)
+		pm_runtime_get_sync(musb->controller);
+
+	/*
+	 * REVISIT always use otg_set_peripheral() here too;
+	 * this needs to shut down the OTG engine.
+	 */
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb_hnp_stop(musb);
+
+	(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+	musb->xceiv->state = OTG_STATE_UNDEFINED;
+	stop_activity(musb, driver);
+	otg_set_peripheral(musb->xceiv->otg, NULL);
+
+	dev_dbg(musb->controller, "unregistering driver %s\n", driver->function);
+
+	musb->is_active = 0;
+	musb_platform_try_idle(musb, 0);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (is_otg_enabled(musb)) {
+		usb_remove_hcd(musb_to_hcd(musb));
+		/* FIXME we need to be able to register another
+		 * gadget driver here and have everything work;
+		 * that currently misbehaves.
+		 */
+	}
+
+	if (!is_otg_enabled(musb))
+		musb_stop(musb);
+
+	pm_runtime_put(musb->controller);
+
+	return 0;
+}
+#endif
+
+/* ----------------------------------------------------------------------- */
+
+/* lifecycle operations called through plat_uds.c */
+
+void musb_g_resume(struct musb *musb)
+{
+#ifndef __UBOOT__
+	musb->is_suspended = 0;
+	switch (musb->xceiv->state) {
+	case OTG_STATE_B_IDLE:
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_active = 1;
+		if (musb->gadget_driver && musb->gadget_driver->resume) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->resume(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		WARNING("unhandled RESUME transition (%s)\n",
+				otg_state_string(musb->xceiv->state));
+	}
+#endif
+}
+
+/* called when SOF packets stop for 3+ msec */
+void musb_g_suspend(struct musb *musb)
+{
+#ifndef __UBOOT__
+	u8	devctl;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	dev_dbg(musb->controller, "devctl %02x\n", devctl);
+
+	switch (musb->xceiv->state) {
+	case OTG_STATE_B_IDLE:
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_suspended = 1;
+		if (musb->gadget_driver && musb->gadget_driver->suspend) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->suspend(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		/* REVISIT if B_HOST, clear DEVCTL.HOSTREQ;
+		 * A_PERIPHERAL may need care too
+		 */
+		WARNING("unhandled SUSPEND transition (%s)\n",
+				otg_state_string(musb->xceiv->state));
+	}
+#endif
+}
+
+/* Called during SRP */
+void musb_g_wakeup(struct musb *musb)
+{
+	musb_gadget_wakeup(&musb->g);
+}
+
+/* called when VBUS drops below session threshold, and in other cases */
+void musb_g_disconnect(struct musb *musb)
+{
+	void __iomem	*mregs = musb->mregs;
+	u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
+
+	dev_dbg(musb->controller, "devctl %02x\n", devctl);
+
+	/* clear HR */
+	musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION);
+
+	/* don't draw vbus until new b-default session */
+	(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+	musb->g.speed = USB_SPEED_UNKNOWN;
+	if (musb->gadget_driver && musb->gadget_driver->disconnect) {
+		spin_unlock(&musb->lock);
+		musb->gadget_driver->disconnect(&musb->g);
+		spin_lock(&musb->lock);
+	}
+
+#ifndef __UBOOT__
+	switch (musb->xceiv->state) {
+	default:
+		dev_dbg(musb->controller, "Unhandled disconnect %s, setting a_idle\n",
+			otg_state_string(musb->xceiv->state));
+		musb->xceiv->state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+		MUSB_HST_MODE(musb);
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_HOST:
+	case OTG_STATE_B_PERIPHERAL:
+	case OTG_STATE_B_IDLE:
+		musb->xceiv->state = OTG_STATE_B_IDLE;
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		break;
+	}
+#endif
+
+	musb->is_active = 0;
+}
+
+void musb_g_reset(struct musb *musb)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl = musb_readb(mbase, MUSB_DEVCTL);
+	u8		power;
+
+#ifndef __UBOOT__
+	dev_dbg(musb->controller, "<== %s addr=%x driver '%s'\n",
+			(devctl & MUSB_DEVCTL_BDEVICE)
+				? "B-Device" : "A-Device",
+			musb_readb(mbase, MUSB_FADDR),
+			musb->gadget_driver
+				? musb->gadget_driver->driver.name
+				: NULL
+			);
+#endif
+
+	/* report disconnect, if we didn't already (flushing EP state) */
+	if (musb->g.speed != USB_SPEED_UNKNOWN)
+		musb_g_disconnect(musb);
+
+	/* clear HR */
+	else if (devctl & MUSB_DEVCTL_HR)
+		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+
+
+	/* what speed did we negotiate? */
+	power = musb_readb(mbase, MUSB_POWER);
+	musb->g.speed = (power & MUSB_POWER_HSMODE)
+			? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+	/* start in USB_STATE_DEFAULT */
+	musb->is_active = 1;
+	musb->is_suspended = 0;
+	MUSB_DEV_MODE(musb);
+	musb->address = 0;
+	musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+
+	musb->may_wakeup = 0;
+	musb->g.b_hnp_enable = 0;
+	musb->g.a_alt_hnp_support = 0;
+	musb->g.a_hnp_support = 0;
+
+#ifndef __UBOOT__
+	/* Normal reset, as B-Device;
+	 * or else after HNP, as A-Device
+	 */
+	if (devctl & MUSB_DEVCTL_BDEVICE) {
+		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+		musb->g.is_a_peripheral = 0;
+	} else if (is_otg_enabled(musb)) {
+		musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
+		musb->g.is_a_peripheral = 1;
+	} else
+		WARN_ON(1);
+
+	/* start with default limits on VBUS power draw */
+	(void) musb_gadget_vbus_draw(&musb->g,
+			is_otg_enabled(musb) ? 8 : 100);
+#endif
+}
diff --git a/drivers/usb/musb-new/musb_gadget.h b/drivers/usb/musb-new/musb_gadget.h
new file mode 100644
index 0000000..392f701
--- /dev/null
+++ b/drivers/usb/musb-new/musb_gadget.h
@@ -0,0 +1,130 @@
+/*
+ * MUSB OTG driver peripheral defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_GADGET_H
+#define __MUSB_GADGET_H
+
+#include <linux/list.h>
+#ifdef __UBOOT__
+#include <asm/byteorder.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#endif
+
+enum buffer_map_state {
+	UN_MAPPED = 0,
+	PRE_MAPPED,
+	MUSB_MAPPED
+};
+
+struct musb_request {
+	struct usb_request	request;
+	struct list_head	list;
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	u8 tx;			/* endpoint direction */
+	u8 epnum;
+	enum buffer_map_state map_state;
+};
+
+static inline struct musb_request *to_musb_request(struct usb_request *req)
+{
+	return req ? container_of(req, struct musb_request, request) : NULL;
+}
+
+extern struct usb_request *
+musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+extern void musb_free_request(struct usb_ep *ep, struct usb_request *req);
+
+
+/*
+ * struct musb_ep - peripheral side view of endpoint rx or tx side
+ */
+struct musb_ep {
+	/* stuff towards the head is basically write-once. */
+	struct usb_ep			end_point;
+	char				name[12];
+	struct musb_hw_ep		*hw_ep;
+	struct musb			*musb;
+	u8				current_epnum;
+
+	/* ... when enabled/disabled ... */
+	u8				type;
+	u8				is_in;
+	u16				packet_sz;
+	const struct usb_endpoint_descriptor	*desc;
+	struct dma_channel		*dma;
+
+	/* later things are modified based on usage */
+	struct list_head		req_list;
+
+	u8				wedged;
+
+	/* true if lock must be dropped but req_list may not be advanced */
+	u8				busy;
+
+	u8				hb_mult;
+};
+
+static inline struct musb_ep *to_musb_ep(struct usb_ep *ep)
+{
+	return ep ? container_of(ep, struct musb_ep, end_point) : NULL;
+}
+
+static inline struct musb_request *next_request(struct musb_ep *ep)
+{
+	struct list_head	*queue = &ep->req_list;
+
+	if (list_empty(queue))
+		return NULL;
+	return container_of(queue->next, struct musb_request, list);
+}
+
+extern void musb_g_tx(struct musb *musb, u8 epnum);
+extern void musb_g_rx(struct musb *musb, u8 epnum);
+
+extern const struct usb_ep_ops musb_g_ep0_ops;
+
+extern int musb_gadget_setup(struct musb *);
+extern void musb_gadget_cleanup(struct musb *);
+
+extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int);
+
+extern void musb_ep_restart(struct musb *, struct musb_request *);
+
+#ifdef __UBOOT__
+int musb_gadget_start(struct usb_gadget *g, struct usb_gadget_driver *driver);
+#endif
+#endif		/* __MUSB_GADGET_H */
diff --git a/drivers/usb/musb-new/musb_gadget_ep0.c b/drivers/usb/musb-new/musb_gadget_ep0.c
new file mode 100644
index 0000000..6599d38
--- /dev/null
+++ b/drivers/usb/musb-new/musb_gadget_ep0.c
@@ -0,0 +1,1089 @@
+/*
+ * MUSB OTG peripheral driver ep0 handling
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#else
+#include <common.h>
+#include "linux-compat.h"
+#endif
+
+#include "musb_core.h"
+
+/* ep0 is always musb->endpoints[0].ep_in */
+#define	next_ep0_request(musb)	next_in_request(&(musb)->endpoints[0])
+
+/*
+ * locking note:  we use only the controller lock, for simpler correctness.
+ * It's always held with IRQs blocked.
+ *
+ * It protects the ep0 request queue as well as ep0_state, not just the
+ * controller and indexed registers.  And that lock stays held unless it
+ * needs to be dropped to allow reentering this driver ... like upcalls to
+ * the gadget driver, or adjusting endpoint halt status.
+ */
+
+static char *decode_ep0stage(u8 stage)
+{
+	switch (stage) {
+	case MUSB_EP0_STAGE_IDLE:	return "idle";
+	case MUSB_EP0_STAGE_SETUP:	return "setup";
+	case MUSB_EP0_STAGE_TX:		return "in";
+	case MUSB_EP0_STAGE_RX:		return "out";
+	case MUSB_EP0_STAGE_ACKWAIT:	return "wait";
+	case MUSB_EP0_STAGE_STATUSIN:	return "in/status";
+	case MUSB_EP0_STAGE_STATUSOUT:	return "out/status";
+	default:			return "?";
+	}
+}
+
+/* handle a standard GET_STATUS request
+ * Context:  caller holds controller lock
+ */
+static int service_tx_status_request(
+	struct musb *musb,
+	const struct usb_ctrlrequest *ctrlrequest)
+{
+	void __iomem	*mbase = musb->mregs;
+	int handled = 1;
+	u8 result[2], epnum = 0;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	result[1] = 0;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
+		result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+		if (musb->g.is_otg) {
+			result[0] |= musb->g.b_hnp_enable
+				<< USB_DEVICE_B_HNP_ENABLE;
+			result[0] |= musb->g.a_alt_hnp_support
+				<< USB_DEVICE_A_ALT_HNP_SUPPORT;
+			result[0] |= musb->g.a_hnp_support
+				<< USB_DEVICE_A_HNP_SUPPORT;
+		}
+		break;
+
+	case USB_RECIP_INTERFACE:
+		result[0] = 0;
+		break;
+
+	case USB_RECIP_ENDPOINT: {
+		int		is_in;
+		struct musb_ep	*ep;
+		u16		tmp;
+		void __iomem	*regs;
+
+		epnum = (u8) ctrlrequest->wIndex;
+		if (!epnum) {
+			result[0] = 0;
+			break;
+		}
+
+		is_in = epnum & USB_DIR_IN;
+		if (is_in) {
+			epnum &= 0x0f;
+			ep = &musb->endpoints[epnum].ep_in;
+		} else {
+			ep = &musb->endpoints[epnum].ep_out;
+		}
+		regs = musb->endpoints[epnum].regs;
+
+		if (epnum >= MUSB_C_NUM_EPS || !ep->desc) {
+			handled = -EINVAL;
+			break;
+		}
+
+		musb_ep_select(mbase, epnum);
+		if (is_in)
+			tmp = musb_readw(regs, MUSB_TXCSR)
+						& MUSB_TXCSR_P_SENDSTALL;
+		else
+			tmp = musb_readw(regs, MUSB_RXCSR)
+						& MUSB_RXCSR_P_SENDSTALL;
+		musb_ep_select(mbase, 0);
+
+		result[0] = tmp ? 1 : 0;
+		} break;
+
+	default:
+		/* class, vendor, etc ... delegate */
+		handled = 0;
+		break;
+	}
+
+	/* fill up the fifo; caller updates csr0 */
+	if (handled > 0) {
+		u16	len = le16_to_cpu(ctrlrequest->wLength);
+
+		if (len > 2)
+			len = 2;
+		musb_write_fifo(&musb->endpoints[0], len, result);
+	}
+
+	return handled;
+}
+
+/*
+ * handle a control-IN request, the end0 buffer contains the current request
+ * that is supposed to be a standard control request. Assumes the fifo to
+ * be at least 2 bytes long.
+ *
+ * @return 0 if the request was NOT HANDLED,
+ * < 0 when error
+ * > 0 when the request is processed
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_in_request(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+{
+	int handled = 0;	/* not handled */
+
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_GET_STATUS:
+			handled = service_tx_status_request(musb,
+					ctrlrequest);
+			break;
+
+		/* case USB_REQ_SYNC_FRAME: */
+
+		default:
+			break;
+		}
+	}
+	return handled;
+}
+
+/*
+ * Context:  caller holds controller lock
+ */
+static void musb_g_ep0_giveback(struct musb *musb, struct usb_request *req)
+{
+	musb_g_giveback(&musb->endpoints[0].ep_in, req, 0);
+}
+
+/*
+ * Tries to start B-device HNP negotiation if enabled via sysfs
+ */
+static inline void musb_try_b_hnp_enable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl;
+
+	dev_dbg(musb->controller, "HNP: Setting HR\n");
+	devctl = musb_readb(mbase, MUSB_DEVCTL);
+	musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
+}
+
+/*
+ * Handle all control requests with no DATA stage, including standard
+ * requests such as:
+ * USB_REQ_SET_CONFIGURATION, USB_REQ_SET_INTERFACE, unrecognized
+ *	always delegated to the gadget driver
+ * USB_REQ_SET_ADDRESS, USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE
+ *	always handled here, except for class/vendor/... features
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_zero_data_request(struct musb *musb,
+		struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int handled = -EINVAL;
+	void __iomem *mbase = musb->mregs;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	/* the gadget driver handles everything except what we MUST handle */
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			/* change it after the status stage */
+			musb->set_address = true;
+			musb->address = (u8) (ctrlrequest->wValue & 0x7f);
+			handled = 1;
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				if (ctrlrequest->wValue
+						!= USB_DEVICE_REMOTE_WAKEUP)
+					break;
+				musb->may_wakeup = 0;
+				handled = 1;
+				break;
+			case USB_RECIP_INTERFACE:
+				break;
+			case USB_RECIP_ENDPOINT:{
+				const u8		epnum =
+					ctrlrequest->wIndex & 0x0f;
+				struct musb_ep		*musb_ep;
+				struct musb_hw_ep	*ep;
+				struct musb_request	*request;
+				void __iomem		*regs;
+				int			is_in;
+				u16			csr;
+
+				if (epnum == 0 || epnum >= MUSB_C_NUM_EPS ||
+				    ctrlrequest->wValue != USB_ENDPOINT_HALT)
+					break;
+
+				ep = musb->endpoints + epnum;
+				regs = ep->regs;
+				is_in = ctrlrequest->wIndex & USB_DIR_IN;
+				if (is_in)
+					musb_ep = &ep->ep_in;
+				else
+					musb_ep = &ep->ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				handled = 1;
+				/* Ignore request if endpoint is wedged */
+				if (musb_ep->wedged)
+					break;
+
+				musb_ep_select(mbase, epnum);
+				if (is_in) {
+					csr  = musb_readw(regs, MUSB_TXCSR);
+					csr |= MUSB_TXCSR_CLRDATATOG |
+					       MUSB_TXCSR_P_WZC_BITS;
+					csr &= ~(MUSB_TXCSR_P_SENDSTALL |
+						 MUSB_TXCSR_P_SENTSTALL |
+						 MUSB_TXCSR_TXPKTRDY);
+					musb_writew(regs, MUSB_TXCSR, csr);
+				} else {
+					csr  = musb_readw(regs, MUSB_RXCSR);
+					csr |= MUSB_RXCSR_CLRDATATOG |
+					       MUSB_RXCSR_P_WZC_BITS;
+					csr &= ~(MUSB_RXCSR_P_SENDSTALL |
+						 MUSB_RXCSR_P_SENTSTALL);
+					musb_writew(regs, MUSB_RXCSR, csr);
+				}
+
+				/* Maybe start the first request in the queue */
+				request = next_request(musb_ep);
+				if (!musb_ep->busy && request) {
+					dev_dbg(musb->controller, "restarting the request\n");
+					musb_ep_restart(musb, request);
+				}
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				} break;
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				handled = 1;
+				switch (ctrlrequest->wValue) {
+				case USB_DEVICE_REMOTE_WAKEUP:
+					musb->may_wakeup = 1;
+					break;
+				case USB_DEVICE_TEST_MODE:
+					if (musb->g.speed != USB_SPEED_HIGH)
+						goto stall;
+					if (ctrlrequest->wIndex & 0xff)
+						goto stall;
+
+					switch (ctrlrequest->wIndex >> 8) {
+					case 1:
+						pr_debug("TEST_J\n");
+						/* TEST_J */
+						musb->test_mode_nr =
+							MUSB_TEST_J;
+						break;
+					case 2:
+						/* TEST_K */
+						pr_debug("TEST_K\n");
+						musb->test_mode_nr =
+							MUSB_TEST_K;
+						break;
+					case 3:
+						/* TEST_SE0_NAK */
+						pr_debug("TEST_SE0_NAK\n");
+						musb->test_mode_nr =
+							MUSB_TEST_SE0_NAK;
+						break;
+					case 4:
+						/* TEST_PACKET */
+						pr_debug("TEST_PACKET\n");
+						musb->test_mode_nr =
+							MUSB_TEST_PACKET;
+						break;
+
+					case 0xc0:
+						/* TEST_FORCE_HS */
+						pr_debug("TEST_FORCE_HS\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FORCE_HS;
+						break;
+					case 0xc1:
+						/* TEST_FORCE_FS */
+						pr_debug("TEST_FORCE_FS\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FORCE_FS;
+						break;
+					case 0xc2:
+						/* TEST_FIFO_ACCESS */
+						pr_debug("TEST_FIFO_ACCESS\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FIFO_ACCESS;
+						break;
+					case 0xc3:
+						/* TEST_FORCE_HOST */
+						pr_debug("TEST_FORCE_HOST\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FORCE_HOST;
+						break;
+					default:
+						goto stall;
+					}
+
+					/* enter test mode after irq */
+					if (handled > 0)
+						musb->test_mode = true;
+					break;
+				case USB_DEVICE_B_HNP_ENABLE:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.b_hnp_enable = 1;
+					musb_try_b_hnp_enable(musb);
+					break;
+				case USB_DEVICE_A_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_hnp_support = 1;
+					break;
+				case USB_DEVICE_A_ALT_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_alt_hnp_support = 1;
+					break;
+				case USB_DEVICE_DEBUG_MODE:
+					handled = 0;
+					break;
+stall:
+				default:
+					handled = -EINVAL;
+					break;
+				}
+				break;
+
+			case USB_RECIP_INTERFACE:
+				break;
+
+			case USB_RECIP_ENDPOINT:{
+				const u8		epnum =
+					ctrlrequest->wIndex & 0x0f;
+				struct musb_ep		*musb_ep;
+				struct musb_hw_ep	*ep;
+				void __iomem		*regs;
+				int			is_in;
+				u16			csr;
+
+				if (epnum == 0 || epnum >= MUSB_C_NUM_EPS ||
+				    ctrlrequest->wValue	!= USB_ENDPOINT_HALT)
+					break;
+
+				ep = musb->endpoints + epnum;
+				regs = ep->regs;
+				is_in = ctrlrequest->wIndex & USB_DIR_IN;
+				if (is_in)
+					musb_ep = &ep->ep_in;
+				else
+					musb_ep = &ep->ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				musb_ep_select(mbase, epnum);
+				if (is_in) {
+					csr = musb_readw(regs, MUSB_TXCSR);
+					if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+						csr |= MUSB_TXCSR_FLUSHFIFO;
+					csr |= MUSB_TXCSR_P_SENDSTALL
+						| MUSB_TXCSR_CLRDATATOG
+						| MUSB_TXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_TXCSR, csr);
+				} else {
+					csr = musb_readw(regs, MUSB_RXCSR);
+					csr |= MUSB_RXCSR_P_SENDSTALL
+						| MUSB_RXCSR_FLUSHFIFO
+						| MUSB_RXCSR_CLRDATATOG
+						| MUSB_RXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_RXCSR, csr);
+				}
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				handled = 1;
+				} break;
+
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+		default:
+			/* delegate SET_CONFIGURATION, etc */
+			handled = 0;
+		}
+	} else
+		handled = 0;
+	return handled;
+}
+
+/* we have an ep0out data packet
+ * Context:  caller holds controller lock
+ */
+static void ep0_rxstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct musb_request	*request;
+	struct usb_request	*req;
+	u16			count, csr;
+
+	request = next_ep0_request(musb);
+	req = &request->request;
+
+	/* read packet and ack; or stall because of gadget driver bug:
+	 * should have provided the rx buffer before setup() returned.
+	 */
+	if (req) {
+		void		*buf = req->buf + req->actual;
+		unsigned	len = req->length - req->actual;
+
+		/* read the buffer */
+		count = musb_readb(regs, MUSB_COUNT0);
+		if (count > len) {
+			req->status = -EOVERFLOW;
+			count = len;
+		}
+		musb_read_fifo(&musb->endpoints[0], count, buf);
+		req->actual += count;
+		csr = MUSB_CSR0_P_SVDRXPKTRDY;
+		if (count < 64 || req->actual == req->length) {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			csr |= MUSB_CSR0_P_DATAEND;
+		} else
+			req = NULL;
+	} else
+		csr = MUSB_CSR0_P_SVDRXPKTRDY | MUSB_CSR0_P_SENDSTALL;
+
+
+	/* Completion handler may choose to stall, e.g. because the
+	 * message just received holds invalid data.
+	 */
+	if (req) {
+		musb->ackpend = csr;
+		musb_g_ep0_giveback(musb, req);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+	musb_ep_select(musb->mregs, 0);
+	musb_writew(regs, MUSB_CSR0, csr);
+}
+
+/*
+ * transmitting to the host (IN), this code might be called from IRQ
+ * and from kernel thread.
+ *
+ * Context:  caller holds controller lock
+ */
+static void ep0_txstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct musb_request	*req = next_ep0_request(musb);
+	struct usb_request	*request;
+	u16			csr = MUSB_CSR0_TXPKTRDY;
+	u8			*fifo_src;
+	u8			fifo_count;
+
+	if (!req) {
+		/* WARN_ON(1); */
+		dev_dbg(musb->controller, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
+		return;
+	}
+
+	request = &req->request;
+
+	/* load the data */
+	fifo_src = (u8 *) request->buf + request->actual;
+	fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
+		request->length - request->actual);
+	musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src);
+	request->actual += fifo_count;
+
+	/* update the flags */
+	if (fifo_count < MUSB_MAX_END0_PACKET
+			|| (request->actual == request->length
+				&& !request->zero)) {
+		musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+		csr |= MUSB_CSR0_P_DATAEND;
+	} else
+		request = NULL;
+
+	/* report completions as soon as the fifo's loaded; there's no
+	 * win in waiting till this last packet gets acked.  (other than
+	 * very precise fault reporting, needed by USB TMC; possible with
+	 * this hardware, but not usable from portable gadget drivers.)
+	 */
+	if (request) {
+		musb->ackpend = csr;
+		musb_g_ep0_giveback(musb, request);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+
+	/* send it out, triggering a "txpktrdy cleared" irq */
+	musb_ep_select(musb->mregs, 0);
+	musb_writew(regs, MUSB_CSR0, csr);
+}
+
+/*
+ * Read a SETUP packet (struct usb_ctrlrequest) from the hardware.
+ * Fields are left in USB byte-order.
+ *
+ * Context:  caller holds controller lock.
+ */
+static void
+musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
+{
+	struct musb_request	*r;
+	void __iomem		*regs = musb->control_ep->regs;
+
+	musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
+
+	/* NOTE:  earlier 2.6 versions changed setup packets to host
+	 * order, but now USB packets always stay in USB byte order.
+	 */
+	dev_dbg(musb->controller, "SETUP req%02x.%02x v%04x i%04x l%d\n",
+		req->bRequestType,
+		req->bRequest,
+		le16_to_cpu(req->wValue),
+		le16_to_cpu(req->wIndex),
+		le16_to_cpu(req->wLength));
+
+	/* clean up any leftover transfers */
+	r = next_ep0_request(musb);
+	if (r)
+		musb_g_ep0_giveback(musb, &r->request);
+
+	/* For zero-data requests we want to delay the STATUS stage to
+	 * avoid SETUPEND errors.  If we read data (OUT), delay accepting
+	 * packets until there's a buffer to store them in.
+	 *
+	 * If we write data, the controller acts happier if we enable
+	 * the TX FIFO right away, and give the controller a moment
+	 * to switch modes...
+	 */
+	musb->set_address = false;
+	musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY;
+	if (req->wLength == 0) {
+		if (req->bRequestType & USB_DIR_IN)
+			musb->ackpend |= MUSB_CSR0_TXPKTRDY;
+		musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT;
+	} else if (req->bRequestType & USB_DIR_IN) {
+		musb->ep0_state = MUSB_EP0_STAGE_TX;
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDRXPKTRDY);
+		while ((musb_readw(regs, MUSB_CSR0)
+				& MUSB_CSR0_RXPKTRDY) != 0)
+			cpu_relax();
+		musb->ackpend = 0;
+	} else
+		musb->ep0_state = MUSB_EP0_STAGE_RX;
+}
+
+static int
+forward_to_driver(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int retval;
+	if (!musb->gadget_driver)
+		return -EOPNOTSUPP;
+	spin_unlock(&musb->lock);
+	retval = musb->gadget_driver->setup(&musb->g, ctrlrequest);
+	spin_lock(&musb->lock);
+	return retval;
+}
+
+/*
+ * Handle peripheral ep0 interrupt
+ *
+ * Context: irq handler; we won't re-enter the driver that way.
+ */
+irqreturn_t musb_g_ep0_irq(struct musb *musb)
+{
+	u16		csr;
+	u16		len;
+	void __iomem	*mbase = musb->mregs;
+	void __iomem	*regs = musb->endpoints[0].regs;
+	irqreturn_t	retval = IRQ_NONE;
+
+	musb_ep_select(mbase, 0);	/* select ep0 */
+	csr = musb_readw(regs, MUSB_CSR0);
+	len = musb_readb(regs, MUSB_COUNT0);
+
+	dev_dbg(musb->controller, "csr %04x, count %d, myaddr %d, ep0stage %s\n",
+			csr, len,
+			musb_readb(mbase, MUSB_FADDR),
+			decode_ep0stage(musb->ep0_state));
+
+	if (csr & MUSB_CSR0_P_DATAEND) {
+		/*
+		 * If DATAEND is set we should not call the callback,
+		 * hence the status stage is not complete.
+		 */
+		return IRQ_HANDLED;
+	}
+
+	/* I sent a stall.. need to acknowledge it now.. */
+	if (csr & MUSB_CSR0_P_SENTSTALL) {
+		musb_writew(regs, MUSB_CSR0,
+				csr & ~MUSB_CSR0_P_SENTSTALL);
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+		csr = musb_readw(regs, MUSB_CSR0);
+	}
+
+	/* request ended "early" */
+	if (csr & MUSB_CSR0_P_SETUPEND) {
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
+		retval = IRQ_HANDLED;
+		/* Transition into the early status phase */
+		switch (musb->ep0_state) {
+		case MUSB_EP0_STAGE_TX:
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+			break;
+		case MUSB_EP0_STAGE_RX:
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			break;
+		default:
+			ERR("SetupEnd came in a wrong ep0stage %s\n",
+			    decode_ep0stage(musb->ep0_state));
+		}
+		csr = musb_readw(regs, MUSB_CSR0);
+		/* NOTE:  request may need completion */
+	}
+
+	/* docs from Mentor only describe tx, rx, and idle/setup states.
+	 * we need to handle nuances around status stages, and also the
+	 * case where status and setup stages come back-to-back ...
+	 */
+	switch (musb->ep0_state) {
+
+	case MUSB_EP0_STAGE_TX:
+		/* irq on clearing txpktrdy */
+		if ((csr & MUSB_CSR0_TXPKTRDY) == 0) {
+			ep0_txstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_RX:
+		/* irq on set rxpktrdy */
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			ep0_rxstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_STATUSIN:
+		/* end of sequence #2 (OUT/RX state) or #3 (no data) */
+
+		/* update address (if needed) only @ the end of the
+		 * status phase per usb spec, which also guarantees
+		 * we get 10 msec to receive this irq... until this
+		 * is done we won't see the next packet.
+		 */
+		if (musb->set_address) {
+			musb->set_address = false;
+			musb_writeb(mbase, MUSB_FADDR, musb->address);
+		}
+
+		/* enter test mode if needed (exit by reset) */
+		else if (musb->test_mode) {
+			dev_dbg(musb->controller, "entering TESTMODE\n");
+
+			if (MUSB_TEST_PACKET == musb->test_mode_nr)
+				musb_load_testpacket(musb);
+
+			musb_writeb(mbase, MUSB_TESTMODE,
+					musb->test_mode_nr);
+		}
+		/* FALLTHROUGH */
+
+	case MUSB_EP0_STAGE_STATUSOUT:
+		/* end of sequence #1: write to host (TX state) */
+		{
+			struct musb_request	*req;
+
+			req = next_ep0_request(musb);
+			if (req)
+				musb_g_ep0_giveback(musb, &req->request);
+		}
+
+		/*
+		 * In case when several interrupts can get coalesced,
+		 * check to see if we've already received a SETUP packet...
+		 */
+		if (csr & MUSB_CSR0_RXPKTRDY)
+			goto setup;
+
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+		break;
+
+	case MUSB_EP0_STAGE_IDLE:
+		/*
+		 * This state is typically (but not always) indiscernible
+		 * from the status states since the corresponding interrupts
+		 * tend to happen within too little period of time (with only
+		 * a zero-length packet in between) and so get coalesced...
+		 */
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		/* FALLTHROUGH */
+
+	case MUSB_EP0_STAGE_SETUP:
+setup:
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			struct usb_ctrlrequest	setup;
+			int			handled = 0;
+
+			if (len != 8) {
+				ERR("SETUP packet len %d != 8 ?\n", len);
+				break;
+			}
+			musb_read_setup(musb, &setup);
+			retval = IRQ_HANDLED;
+
+			/* sometimes the RESET won't be reported */
+			if (unlikely(musb->g.speed == USB_SPEED_UNKNOWN)) {
+				u8	power;
+
+				printk(KERN_NOTICE "%s: peripheral reset "
+						"irq lost!\n",
+						musb_driver_name);
+				power = musb_readb(mbase, MUSB_POWER);
+				musb->g.speed = (power & MUSB_POWER_HSMODE)
+					? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+			}
+
+			switch (musb->ep0_state) {
+
+			/* sequence #3 (no data stage), includes requests
+			 * we can't forward (notably SET_ADDRESS and the
+			 * device/endpoint feature set/clear operations)
+			 * plus SET_CONFIGURATION and others we must
+			 */
+			case MUSB_EP0_STAGE_ACKWAIT:
+				handled = service_zero_data_request(
+						musb, &setup);
+
+				/*
+				 * We're expecting no data in any case, so
+				 * always set the DATAEND bit -- doing this
+				 * here helps avoid SetupEnd interrupt coming
+				 * in the idle stage when we're stalling...
+				 */
+				musb->ackpend |= MUSB_CSR0_P_DATAEND;
+
+				/* status stage might be immediate */
+				if (handled > 0)
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSIN;
+				break;
+
+			/* sequence #1 (IN to host), includes GET_STATUS
+			 * requests that we can't forward, GET_DESCRIPTOR
+			 * and others that we must
+			 */
+			case MUSB_EP0_STAGE_TX:
+				handled = service_in_request(musb, &setup);
+				if (handled > 0) {
+					musb->ackpend = MUSB_CSR0_TXPKTRDY
+						| MUSB_CSR0_P_DATAEND;
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSOUT;
+				}
+				break;
+
+			/* sequence #2 (OUT from host), always forward */
+			default:		/* MUSB_EP0_STAGE_RX */
+				break;
+			}
+
+			dev_dbg(musb->controller, "handled %d, csr %04x, ep0stage %s\n",
+				handled, csr,
+				decode_ep0stage(musb->ep0_state));
+
+			/* unless we need to delegate this to the gadget
+			 * driver, we know how to wrap this up:  csr0 has
+			 * not yet been written.
+			 */
+			if (handled < 0)
+				goto stall;
+			else if (handled > 0)
+				goto finish;
+
+			handled = forward_to_driver(musb, &setup);
+			if (handled < 0) {
+				musb_ep_select(mbase, 0);
+stall:
+				dev_dbg(musb->controller, "stall (%d)\n", handled);
+				musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
+				musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+finish:
+				musb_writew(regs, MUSB_CSR0,
+						musb->ackpend);
+				musb->ackpend = 0;
+			}
+		}
+		break;
+
+	case MUSB_EP0_STAGE_ACKWAIT:
+		/* This should not happen. But happens with tusb6010 with
+		 * g_file_storage and high speed. Do nothing.
+		 */
+		retval = IRQ_HANDLED;
+		break;
+
+	default:
+		/* "can't happen" */
+		WARN_ON(1);
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+		break;
+	}
+
+	return retval;
+}
+
+
+static int
+musb_g_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_disable(struct usb_ep *e)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int
+musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
+{
+	struct musb_ep		*ep;
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			status;
+	unsigned long		lockflags;
+	void __iomem		*regs;
+
+	if (!e || !r)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	regs = musb->control_ep->regs;
+
+	req = to_musb_request(r);
+	req->musb = musb;
+	req->request.actual = 0;
+	req->request.status = -EINPROGRESS;
+	req->tx = ep->is_in;
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	switch (musb->ep0_state) {
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* zero-length data */
+		status = 0;
+		break;
+	default:
+		dev_dbg(musb->controller, "ep0 request queued in state %d\n",
+				musb->ep0_state);
+		status = -EINVAL;
+		goto cleanup;
+	}
+
+	/* add request to the list */
+	list_add_tail(&req->list, &ep->req_list);
+
+	dev_dbg(musb->controller, "queue to %s (%s), length=%d\n",
+			ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
+			req->request.length);
+
+	musb_ep_select(musb->mregs, 0);
+
+	/* sequence #1, IN ... start writing the data */
+	if (musb->ep0_state == MUSB_EP0_STAGE_TX)
+		ep0_txstate(musb);
+
+	/* sequence #3, no-data ... issue IN status */
+	else if (musb->ep0_state == MUSB_EP0_STAGE_ACKWAIT) {
+		if (req->request.length)
+			status = -EINVAL;
+		else {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			musb_writew(regs, MUSB_CSR0,
+					musb->ackpend | MUSB_CSR0_P_DATAEND);
+			musb->ackpend = 0;
+			musb_g_ep0_giveback(ep->musb, r);
+		}
+
+	/* else for sequence #2 (OUT), caller provides a buffer
+	 * before the next packet arrives.  deferred responses
+	 * (after SETUP is acked) are racey.
+	 */
+	} else if (musb->ackpend) {
+		musb_writew(regs, MUSB_CSR0, musb->ackpend);
+		musb->ackpend = 0;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	return status;
+}
+
+static int musb_g_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	/* we just won't support this */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_halt(struct usb_ep *e, int value)
+{
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	void __iomem		*base, *regs;
+	unsigned long		flags;
+	int			status;
+	u16			csr;
+
+	if (!e || !value)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	base = musb->mregs;
+	regs = musb->control_ep->regs;
+	status = 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	musb_ep_select(base, 0);
+	csr = musb->ackpend;
+
+	switch (musb->ep0_state) {
+
+	/* Stalls are usually issued after parsing SETUP packet, either
+	 * directly in irq context from setup() or else later.
+	 */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* STALL for zero-length data */
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+		csr = musb_readw(regs, MUSB_CSR0);
+		/* FALLTHROUGH */
+
+	/* It's also OK to issue stalls during callbacks when a non-empty
+	 * DATA stage buffer has been read (or even written).
+	 */
+	case MUSB_EP0_STAGE_STATUSIN:	/* control-OUT status */
+	case MUSB_EP0_STAGE_STATUSOUT:	/* control-IN status */
+
+		csr |= MUSB_CSR0_P_SENDSTALL;
+		musb_writew(regs, MUSB_CSR0, csr);
+		musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+		musb->ackpend = 0;
+		break;
+	default:
+		dev_dbg(musb->controller, "ep0 can't halt in state %d\n", musb->ep0_state);
+		status = -EINVAL;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+const struct usb_ep_ops musb_g_ep0_ops = {
+	.enable		= musb_g_ep0_enable,
+	.disable	= musb_g_ep0_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_g_ep0_queue,
+	.dequeue	= musb_g_ep0_dequeue,
+	.set_halt	= musb_g_ep0_halt,
+};
diff --git a/drivers/usb/musb-new/musb_host.c b/drivers/usb/musb-new/musb_host.c
new file mode 100644
index 0000000..9a2cf59
--- /dev/null
+++ b/drivers/usb/musb-new/musb_host.c
@@ -0,0 +1,2400 @@
+/*
+ * MUSB OTG driver host support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+#else
+#include <common.h>
+#include <usb.h>
+#include "linux-compat.h"
+#include "usb-compat.h"
+#endif
+
+#include "musb_core.h"
+#include "musb_host.h"
+
+
+/* MUSB HOST status 22-mar-2006
+ *
+ * - There's still lots of partial code duplication for fault paths, so
+ *   they aren't handled as consistently as they need to be.
+ *
+ * - PIO mostly behaved when last tested.
+ *     + including ep0, with all usbtest cases 9, 10
+ *     + usbtest 14 (ep0out) doesn't seem to run at all
+ *     + double buffered OUT/TX endpoints saw stalls(!) with certain usbtest
+ *       configurations, but otherwise double buffering passes basic tests.
+ *     + for 2.6.N, for N > ~10, needs API changes for hcd framework.
+ *
+ * - DMA (CPPI) ... partially behaves, not currently recommended
+ *     + about 1/15 the speed of typical EHCI implementations (PCI)
+ *     + RX, all too often reqpkt seems to misbehave after tx
+ *     + TX, no known issues (other than evident silicon issue)
+ *
+ * - DMA (Mentor/OMAP) ...has at least toggle update problems
+ *
+ * - [23-feb-2009] minimal traffic scheduling to avoid bulk RX packet
+ *   starvation ... nothing yet for TX, interrupt, or bulk.
+ *
+ * - Not tested with HNP, but some SRP paths seem to behave.
+ *
+ * NOTE 24-August-2006:
+ *
+ * - Bulk traffic finally uses both sides of hardware ep1, freeing up an
+ *   extra endpoint for periodic use enabling hub + keybd + mouse.  That
+ *   mostly works, except that with "usbnet" it's easy to trigger cases
+ *   with "ping" where RX loses.  (a) ping to davinci, even "ping -f",
+ *   fine; but (b) ping _from_ davinci, even "ping -c 1", ICMP RX loses
+ *   although ARP RX wins.  (That test was done with a full speed link.)
+ */
+
+
+/*
+ * NOTE on endpoint usage:
+ *
+ * CONTROL transfers all go through ep0.  BULK ones go through dedicated IN
+ * and OUT endpoints ... hardware is dedicated for those "async" queue(s).
+ * (Yes, bulk _could_ use more of the endpoints than that, and would even
+ * benefit from it.)
+ *
+ * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
+ * So far that scheduling is both dumb and optimistic:  the endpoint will be
+ * "claimed" until its software queue is no longer refilled.  No multiplexing
+ * of transfers between endpoints, or anything clever.
+ */
+
+
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, int is_out,
+			u8 *buf, u32 offset, u32 len);
+
+/*
+ * Clear TX fifo. Needed to avoid BABBLE errors.
+ */
+static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
+{
+	struct musb	*musb = ep->musb;
+	void __iomem	*epio = ep->regs;
+	u16		csr;
+	u16		lastcsr = 0;
+	int		retries = 1000;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+		if (csr != lastcsr)
+			dev_dbg(musb->controller, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
+		lastcsr = csr;
+		csr |= MUSB_TXCSR_FLUSHFIFO;
+		musb_writew(epio, MUSB_TXCSR, csr);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (WARN(retries-- < 1,
+				"Could not flush host TX%d fifo: csr: %04x\n",
+				ep->epnum, csr))
+			return;
+		mdelay(1);
+	}
+}
+
+static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep)
+{
+	void __iomem	*epio = ep->regs;
+	u16		csr;
+	int		retries = 5;
+
+	/* scrub any data left in the fifo */
+	do {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY)))
+			break;
+		musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		udelay(10);
+	} while (--retries);
+
+	WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n",
+			ep->epnum, csr);
+
+	/* and reset for the next transfer */
+	musb_writew(epio, MUSB_TXCSR, 0);
+}
+
+/*
+ * Start transmit. Caller is responsible for locking shared resources.
+ * musb must be locked.
+ */
+static inline void musb_h_tx_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	if (ep->epnum) {
+		txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+		txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
+		musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+	} else {
+		txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
+		musb_writew(ep->regs, MUSB_CSR0, txcsr);
+	}
+
+}
+
+static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+	txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+	if (is_cppi_enabled())
+		txcsr |= MUSB_TXCSR_DMAMODE;
+	musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+}
+
+static void musb_ep_set_qh(struct musb_hw_ep *ep, int is_in, struct musb_qh *qh)
+{
+	if (is_in != 0 || ep->is_shared_fifo)
+		ep->in_qh  = qh;
+	if (is_in == 0 || ep->is_shared_fifo)
+		ep->out_qh = qh;
+}
+
+static struct musb_qh *musb_ep_get_qh(struct musb_hw_ep *ep, int is_in)
+{
+	return is_in ? ep->in_qh : ep->out_qh;
+}
+
+/*
+ * Start the URB at the front of an endpoint's queue
+ * end must be claimed from the caller.
+ *
+ * Context: controller locked, irqs blocked
+ */
+static void
+musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
+{
+	u16			frame;
+	u32			len;
+	void __iomem		*mbase =  musb->mregs;
+	struct urb		*urb = next_urb(qh);
+	void			*buf = urb->transfer_buffer;
+	u32			offset = 0;
+	struct musb_hw_ep	*hw_ep = qh->hw_ep;
+	unsigned		pipe = urb->pipe;
+	u8			address = usb_pipedevice(pipe);
+	int			epnum = hw_ep->epnum;
+
+	/* initialize software qh state */
+	qh->offset = 0;
+	qh->segsize = 0;
+
+	/* gather right source of data */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* control transfers always start with SETUP */
+		is_in = 0;
+		musb->ep0_stage = MUSB_EP0_START;
+		buf = urb->setup_packet;
+		len = 8;
+		break;
+#ifndef __UBOOT__
+	case USB_ENDPOINT_XFER_ISOC:
+		qh->iso_idx = 0;
+		qh->frame = 0;
+		offset = urb->iso_frame_desc[0].offset;
+		len = urb->iso_frame_desc[0].length;
+		break;
+#endif
+	default:		/* bulk, interrupt */
+		/* actual_length may be nonzero on retry paths */
+		buf = urb->transfer_buffer + urb->actual_length;
+		len = urb->transfer_buffer_length - urb->actual_length;
+	}
+
+	dev_dbg(musb->controller, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
+			qh, urb, address, qh->epnum,
+			is_in ? "in" : "out",
+			({char *s; switch (qh->type) {
+			case USB_ENDPOINT_XFER_CONTROL:	s = ""; break;
+			case USB_ENDPOINT_XFER_BULK:	s = "-bulk"; break;
+#ifndef __UBOOT__
+			case USB_ENDPOINT_XFER_ISOC:	s = "-iso"; break;
+#endif
+			default:			s = "-intr"; break;
+			}; s; }),
+			epnum, buf + offset, len);
+
+	/* Configure endpoint */
+	musb_ep_set_qh(hw_ep, is_in, qh);
+	musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
+
+	/* transmit may have more work: start it when it is time */
+	if (is_in)
+		return;
+
+	/* determine if the time is right for a periodic transfer */
+	switch (qh->type) {
+#ifndef __UBOOT__
+	case USB_ENDPOINT_XFER_ISOC:
+#endif
+	case USB_ENDPOINT_XFER_INT:
+		dev_dbg(musb->controller, "check whether there's still time for periodic Tx\n");
+		frame = musb_readw(mbase, MUSB_FRAME);
+		/* FIXME this doesn't implement that scheduling policy ...
+		 * or handle framecounter wrapping
+		 */
+#ifndef __UBOOT__
+		if ((urb->transfer_flags & URB_ISO_ASAP)
+				|| (frame >= urb->start_frame)) {
+			/* REVISIT the SOF irq handler shouldn't duplicate
+			 * this code; and we don't init urb->start_frame...
+			 */
+			qh->frame = 0;
+			goto start;
+		} else {
+#endif
+			qh->frame = urb->start_frame;
+			/* enable SOF interrupt so we can count down */
+			dev_dbg(musb->controller, "SOF for %d\n", epnum);
+#if 1 /* ifndef	CONFIG_ARCH_DAVINCI */
+			musb_writeb(mbase, MUSB_INTRUSBE, 0xff);
+#endif
+#ifndef __UBOOT__
+		}
+#endif
+		break;
+	default:
+start:
+		dev_dbg(musb->controller, "Start TX%d %s\n", epnum,
+			hw_ep->tx_channel ? "dma" : "pio");
+
+		if (!hw_ep->tx_channel)
+			musb_h_tx_start(hw_ep);
+		else if (is_cppi_enabled() || tusb_dma_omap())
+			musb_h_tx_dma_start(hw_ep);
+	}
+}
+
+/* Context: caller owns controller lock, IRQs are blocked */
+static void musb_giveback(struct musb *musb, struct urb *urb, int status)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	dev_dbg(musb->controller,
+			"complete %p %pF (%d), dev%d ep%d%s, %d/%d\n",
+			urb, urb->complete, status,
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out",
+			urb->actual_length, urb->transfer_buffer_length
+			);
+
+	usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
+	spin_unlock(&musb->lock);
+	usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status);
+	spin_lock(&musb->lock);
+}
+
+/* For bulk/interrupt endpoints only */
+static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
+				    struct urb *urb)
+{
+	void __iomem		*epio = qh->hw_ep->regs;
+	u16			csr;
+
+	/*
+	 * FIXME: the current Mentor DMA code seems to have
+	 * problems getting toggle correct.
+	 */
+
+	if (is_in)
+		csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
+	else
+		csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
+
+	usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
+}
+
+/*
+ * Advance this hardware endpoint's queue, completing the specified URB and
+ * advancing to either the next URB queued to that qh, or else invalidating
+ * that qh and advancing to the next qh scheduled after the current one.
+ *
+ * Context: caller owns controller lock, IRQs are blocked
+ */
+static void musb_advance_schedule(struct musb *musb, struct urb *urb,
+				  struct musb_hw_ep *hw_ep, int is_in)
+{
+	struct musb_qh		*qh = musb_ep_get_qh(hw_ep, is_in);
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	int			ready = qh->is_ready;
+	int			status;
+
+	status = (urb->status == -EINPROGRESS) ? 0 : urb->status;
+
+	/* save toggle eagerly, for paranoia */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		musb_save_toggle(qh, is_in, urb);
+		break;
+#ifndef __UBOOT__
+	case USB_ENDPOINT_XFER_ISOC:
+		if (status == 0 && urb->error_count)
+			status = -EXDEV;
+		break;
+#endif
+	}
+
+	qh->is_ready = 0;
+	musb_giveback(musb, urb, status);
+	qh->is_ready = ready;
+
+	/* reclaim resources (and bandwidth) ASAP; deschedule it, and
+	 * invalidate qh as soon as list_empty(&hep->urb_list)
+	 */
+	if (list_empty(&qh->hep->urb_list)) {
+		struct list_head	*head;
+		struct dma_controller	*dma = musb->dma_controller;
+
+		if (is_in) {
+			ep->rx_reinit = 1;
+			if (ep->rx_channel) {
+				dma->channel_release(ep->rx_channel);
+				ep->rx_channel = NULL;
+			}
+		} else {
+			ep->tx_reinit = 1;
+			if (ep->tx_channel) {
+				dma->channel_release(ep->tx_channel);
+				ep->tx_channel = NULL;
+			}
+		}
+
+		/* Clobber old pointers to this qh */
+		musb_ep_set_qh(ep, is_in, NULL);
+		qh->hep->hcpriv = NULL;
+
+		switch (qh->type) {
+
+		case USB_ENDPOINT_XFER_CONTROL:
+		case USB_ENDPOINT_XFER_BULK:
+			/* fifo policy for these lists, except that NAKing
+			 * should rotate a qh to the end (for fairness).
+			 */
+			if (qh->mux == 1) {
+				head = qh->ring.prev;
+				list_del(&qh->ring);
+				kfree(qh);
+				qh = first_qh(head);
+				break;
+			}
+
+		case USB_ENDPOINT_XFER_ISOC:
+		case USB_ENDPOINT_XFER_INT:
+			/* this is where periodic bandwidth should be
+			 * de-allocated if it's tracked and allocated;
+			 * and where we'd update the schedule tree...
+			 */
+			kfree(qh);
+			qh = NULL;
+			break;
+		}
+	}
+
+	if (qh != NULL && qh->is_ready) {
+		dev_dbg(musb->controller, "... next ep%d %cX urb %p\n",
+		    hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
+		musb_start_urb(musb, is_in, qh);
+	}
+}
+
+static u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr)
+{
+	/* we don't want fifo to fill itself again;
+	 * ignore dma (various models),
+	 * leave toggle alone (may not have been saved yet)
+	 */
+	csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_RXPKTRDY;
+	csr &= ~(MUSB_RXCSR_H_REQPKT
+		| MUSB_RXCSR_H_AUTOREQ
+		| MUSB_RXCSR_AUTOCLEAR);
+
+	/* write 2x to allow double buffering */
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+
+	/* flush writebuffer */
+	return musb_readw(hw_ep->regs, MUSB_RXCSR);
+}
+
+/*
+ * PIO RX for a packet (or part of it).
+ */
+static bool
+musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
+{
+	u16			rx_count;
+	u8			*buf;
+	u16			csr;
+	bool			done = false;
+	u32			length;
+	int			do_flush = 0;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	int			pipe = urb->pipe;
+	void			*buffer = urb->transfer_buffer;
+
+	/* musb_ep_select(mbase, epnum); */
+	rx_count = musb_readw(epio, MUSB_RXCOUNT);
+	dev_dbg(musb->controller, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count,
+			urb->transfer_buffer, qh->offset,
+			urb->transfer_buffer_length);
+
+	/* unload FIFO */
+#ifndef __UBOOT__
+	if (usb_pipeisoc(pipe)) {
+		int					status = 0;
+		struct usb_iso_packet_descriptor	*d;
+
+		if (iso_err) {
+			status = -EILSEQ;
+			urb->error_count++;
+		}
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+		buf = buffer + d->offset;
+		length = d->length;
+		if (rx_count > length) {
+			if (status == 0) {
+				status = -EOVERFLOW;
+				urb->error_count++;
+			}
+			dev_dbg(musb->controller, "** OVERFLOW %d into %d\n", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		d->actual_length = length;
+
+		d->status = status;
+
+		/* see if we are done */
+		done = (++qh->iso_idx >= urb->number_of_packets);
+	} else {
+#endif
+		/* non-isoch */
+		buf = buffer + qh->offset;
+		length = urb->transfer_buffer_length - qh->offset;
+		if (rx_count > length) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = -EOVERFLOW;
+			dev_dbg(musb->controller, "** OVERFLOW %d into %d\n", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		qh->offset += length;
+
+		/* see if we are done */
+		done = (urb->actual_length == urb->transfer_buffer_length)
+			|| (rx_count < qh->maxpacket)
+			|| (urb->status != -EINPROGRESS);
+		if (done
+				&& (urb->status == -EINPROGRESS)
+				&& (urb->transfer_flags & URB_SHORT_NOT_OK)
+				&& (urb->actual_length
+					< urb->transfer_buffer_length))
+			urb->status = -EREMOTEIO;
+#ifndef __UBOOT__
+	}
+#endif
+
+	musb_read_fifo(hw_ep, length, buf);
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	csr |= MUSB_RXCSR_H_WZC_BITS;
+	if (unlikely(do_flush))
+		musb_h_flush_rxfifo(hw_ep, csr);
+	else {
+		/* REVISIT this assumes AUTOCLEAR is never set */
+		csr &= ~(MUSB_RXCSR_RXPKTRDY | MUSB_RXCSR_H_REQPKT);
+		if (!done)
+			csr |= MUSB_RXCSR_H_REQPKT;
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	return done;
+}
+
+/* we don't always need to reinit a given side of an endpoint...
+ * when we do, use tx/rx reinit routine and then construct a new CSR
+ * to address data toggle, NYET, and DMA or PIO.
+ *
+ * it's possible that driver bugs (especially for DMA) or aborting a
+ * transfer might have left the endpoint busier than it should be.
+ * the busy/not-empty tests are basically paranoia.
+ */
+static void
+musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
+{
+	u16	csr;
+
+	/* NOTE:  we know the "rx" fifo reinit never triggers for ep0.
+	 * That always uses tx_reinit since ep0 repurposes TX register
+	 * offsets; the initial SETUP packet is also a kind of OUT.
+	 */
+
+	/* if programmed for Tx, put it in RX mode */
+	if (ep->is_shared_fifo) {
+		csr = musb_readw(ep->regs, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_MODE) {
+			musb_h_tx_flush_fifo(ep);
+			csr = musb_readw(ep->regs, MUSB_TXCSR);
+			musb_writew(ep->regs, MUSB_TXCSR,
+				    csr | MUSB_TXCSR_FRCDATATOG);
+		}
+
+		/*
+		 * Clear the MODE bit (and everything else) to enable Rx.
+		 * NOTE: we mustn't clear the DMAMODE bit before DMAENAB.
+		 */
+		if (csr & MUSB_TXCSR_DMAMODE)
+			musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
+		musb_writew(ep->regs, MUSB_TXCSR, 0);
+
+	/* scrub all previous state, clearing toggle */
+	} else {
+		csr = musb_readw(ep->regs, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_RXPKTRDY)
+			WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+				musb_readw(ep->regs, MUSB_RXCOUNT));
+
+		musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
+	}
+
+	/* target addr and (for multipoint) hub addr/port */
+	if (musb->is_multipoint) {
+		musb_write_rxfunaddr(ep->target_regs, qh->addr_reg);
+		musb_write_rxhubaddr(ep->target_regs, qh->h_addr_reg);
+		musb_write_rxhubport(ep->target_regs, qh->h_port_reg);
+
+	} else
+		musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg);
+
+	/* protocol/endpoint, interval/NAKlimit, i/o size */
+	musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
+	musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
+	/* NOTE: bulk combining rewrites high bits of maxpacket */
+	/* Set RXMAXP with the FIFO size of the endpoint
+	 * to disable double buffer mode.
+	 */
+	if (musb->double_buffer_not_ok)
+		musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
+	else
+		musb_writew(ep->regs, MUSB_RXMAXP,
+				qh->maxpacket | ((qh->hb_mult - 1) << 11));
+
+	ep->rx_reinit = 0;
+}
+
+static bool musb_tx_dma_program(struct dma_controller *dma,
+		struct musb_hw_ep *hw_ep, struct musb_qh *qh,
+		struct urb *urb, u32 offset, u32 length)
+{
+	struct dma_channel	*channel = hw_ep->tx_channel;
+	void __iomem		*epio = hw_ep->regs;
+	u16			pkt_size = qh->maxpacket;
+	u16			csr;
+	u8			mode;
+
+#ifdef	CONFIG_USB_INVENTRA_DMA
+	if (length > channel->max_len)
+		length = channel->max_len;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	if (length > pkt_size) {
+		mode = 1;
+		csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB;
+		/* autoset shouldn't be set in high bandwidth */
+		if (qh->hb_mult == 1)
+			csr |= MUSB_TXCSR_AUTOSET;
+	} else {
+		mode = 0;
+		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
+		csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
+	}
+	channel->desired_mode = mode;
+	musb_writew(epio, MUSB_TXCSR, csr);
+#else
+	if (!is_cppi_enabled() && !tusb_dma_omap())
+		return false;
+
+	channel->actual_len = 0;
+
+	/*
+	 * TX uses "RNDIS" mode automatically but needs help
+	 * to identify the zero-length-final-packet case.
+	 */
+	mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
+#endif
+
+	qh->segsize = length;
+
+	/*
+	 * Ensure the data reaches to main memory before starting
+	 * DMA transfer
+	 */
+	wmb();
+
+	if (!dma->channel_program(channel, pkt_size, mode,
+			urb->transfer_dma + offset, length)) {
+		dma->channel_release(channel);
+		hw_ep->tx_channel = NULL;
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+		musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS);
+		return false;
+	}
+	return true;
+}
+
+/*
+ * Program an HDRC endpoint as per the given URB
+ * Context: irqs blocked, controller lock held
+ */
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, int is_out,
+			u8 *buf, u32 offset, u32 len)
+{
+	struct dma_controller	*dma_controller;
+	struct dma_channel	*dma_channel;
+	u8			dma_ok;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = musb_ep_get_qh(hw_ep, !is_out);
+	u16			packet_sz = qh->maxpacket;
+
+	dev_dbg(musb->controller, "%s hw%d urb %p spd%d dev%d ep%d%s "
+				"h_addr%02x h_port%02x bytes %d\n",
+			is_out ? "-->" : "<--",
+			epnum, urb, urb->dev->speed,
+			qh->addr_reg, qh->epnum, is_out ? "out" : "in",
+			qh->h_addr_reg, qh->h_port_reg,
+			len);
+
+	musb_ep_select(mbase, epnum);
+
+	/* candidate for DMA? */
+	dma_controller = musb->dma_controller;
+	if (is_dma_capable() && epnum && dma_controller) {
+		dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel;
+		if (!dma_channel) {
+			dma_channel = dma_controller->channel_alloc(
+					dma_controller, hw_ep, is_out);
+			if (is_out)
+				hw_ep->tx_channel = dma_channel;
+			else
+				hw_ep->rx_channel = dma_channel;
+		}
+	} else
+		dma_channel = NULL;
+
+	/* make sure we clear DMAEnab, autoSet bits from previous run */
+
+	/* OUT/transmit/EP0 or IN/receive? */
+	if (is_out) {
+		u16	csr;
+		u16	int_txe;
+		u16	load_count;
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/* disable interrupt in case we flush */
+		int_txe = musb_readw(mbase, MUSB_INTRTXE);
+		musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+		/* general endpoint setup */
+		if (epnum) {
+			/* flush all old state, set default */
+			musb_h_tx_flush_fifo(hw_ep);
+
+			/*
+			 * We must not clear the DMAMODE bit before or in
+			 * the same cycle with the DMAENAB bit, so we clear
+			 * the latter first...
+			 */
+			csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
+					| MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAENAB
+					| MUSB_TXCSR_FRCDATATOG
+					| MUSB_TXCSR_H_RXSTALL
+					| MUSB_TXCSR_H_ERROR
+					| MUSB_TXCSR_TXPKTRDY
+					);
+			csr |= MUSB_TXCSR_MODE;
+
+			if (usb_gettoggle(urb->dev, qh->epnum, 1))
+				csr |= MUSB_TXCSR_H_WR_DATATOGGLE
+					| MUSB_TXCSR_H_DATATOGGLE;
+			else
+				csr |= MUSB_TXCSR_CLRDATATOG;
+
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may need to clear FLUSHFIFO ... */
+			csr &= ~MUSB_TXCSR_DMAMODE;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			csr = musb_readw(epio, MUSB_TXCSR);
+		} else {
+			/* endpoint 0: just flush */
+			musb_h_ep0_flush_fifo(hw_ep);
+		}
+
+		/* target addr and (for multipoint) hub addr/port */
+		if (musb->is_multipoint) {
+			musb_write_txfunaddr(mbase, epnum, qh->addr_reg);
+			musb_write_txhubaddr(mbase, epnum, qh->h_addr_reg);
+			musb_write_txhubport(mbase, epnum, qh->h_port_reg);
+/* FIXME if !epnum, do the same for RX ... */
+		} else
+			musb_writeb(mbase, MUSB_FADDR, qh->addr_reg);
+
+		/* protocol/endpoint/interval/NAKlimit */
+		if (epnum) {
+			musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
+			if (musb->double_buffer_not_ok)
+				musb_writew(epio, MUSB_TXMAXP,
+						hw_ep->max_packet_sz_tx);
+			else if (can_bulk_split(musb, qh->type))
+				musb_writew(epio, MUSB_TXMAXP, packet_sz
+					| ((hw_ep->max_packet_sz_tx /
+						packet_sz) - 1) << 11);
+			else
+				musb_writew(epio, MUSB_TXMAXP,
+						qh->maxpacket |
+						((qh->hb_mult - 1) << 11));
+			musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
+		} else {
+			musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
+			if (musb->is_multipoint)
+				musb_writeb(epio, MUSB_TYPE0,
+						qh->type_reg);
+		}
+
+		if (can_bulk_split(musb, qh->type))
+			load_count = min((u32) hw_ep->max_packet_sz_tx,
+						len);
+		else
+			load_count = min((u32) packet_sz, len);
+
+		if (dma_channel && musb_tx_dma_program(dma_controller,
+					hw_ep, qh, urb, offset, len))
+			load_count = 0;
+
+		if (load_count) {
+			/* PIO to load FIFO */
+			qh->segsize = load_count;
+			musb_write_fifo(hw_ep, load_count, buf);
+		}
+
+		/* re-enable interrupt */
+		musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+	/* IN/receive */
+	} else {
+		u16	csr;
+
+		if (hw_ep->rx_reinit) {
+			musb_rx_reinit(musb, qh, hw_ep);
+
+			/* init new state: toggle and NYET, maybe DMA later */
+			if (usb_gettoggle(urb->dev, qh->epnum, 0))
+				csr = MUSB_RXCSR_H_WR_DATATOGGLE
+					| MUSB_RXCSR_H_DATATOGGLE;
+			else
+				csr = 0;
+			if (qh->type == USB_ENDPOINT_XFER_INT)
+				csr |= MUSB_RXCSR_DISNYET;
+
+		} else {
+			csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+
+			if (csr & (MUSB_RXCSR_RXPKTRDY
+					| MUSB_RXCSR_DMAENAB
+					| MUSB_RXCSR_H_REQPKT))
+				ERR("broken !rx_reinit, ep%d csr %04x\n",
+						hw_ep->epnum, csr);
+
+			/* scrub any stale state, leaving toggle alone */
+			csr &= MUSB_RXCSR_DISNYET;
+		}
+
+		/* kick things off */
+
+		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+			/* Candidate for DMA */
+			dma_channel->actual_len = 0L;
+			qh->segsize = len;
+
+			/* AUTOREQ is in a DMA register */
+			musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+			csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+
+			/*
+			 * Unless caller treats short RX transfers as
+			 * errors, we dare not queue multiple transfers.
+			 */
+			dma_ok = dma_controller->channel_program(dma_channel,
+					packet_sz, !(urb->transfer_flags &
+						     URB_SHORT_NOT_OK),
+					urb->transfer_dma + offset,
+					qh->segsize);
+			if (!dma_ok) {
+				dma_controller->channel_release(dma_channel);
+				hw_ep->rx_channel = dma_channel = NULL;
+			} else
+				csr |= MUSB_RXCSR_DMAENAB;
+		}
+
+		csr |= MUSB_RXCSR_H_REQPKT;
+		dev_dbg(musb->controller, "RXCSR%d := %04x\n", epnum, csr);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+	}
+}
+
+
+/*
+ * Service the default endpoint (ep0) as host.
+ * Return true until it's time to start the status stage.
+ */
+static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
+{
+	bool			 more = false;
+	u8			*fifo_dest = NULL;
+	u16			fifo_count = 0;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	struct usb_ctrlrequest	*request;
+
+	switch (musb->ep0_stage) {
+	case MUSB_EP0_IN:
+		fifo_dest = urb->transfer_buffer + urb->actual_length;
+		fifo_count = min_t(size_t, len, urb->transfer_buffer_length -
+				   urb->actual_length);
+		if (fifo_count < len)
+			urb->status = -EOVERFLOW;
+
+		musb_read_fifo(hw_ep, fifo_count, fifo_dest);
+
+		urb->actual_length += fifo_count;
+		if (len < qh->maxpacket) {
+			/* always terminate on short read; it's
+			 * rarely reported as an error.
+			 */
+		} else if (urb->actual_length <
+				urb->transfer_buffer_length)
+			more = true;
+		break;
+	case MUSB_EP0_START:
+		request = (struct usb_ctrlrequest *) urb->setup_packet;
+
+		if (!request->wLength) {
+			dev_dbg(musb->controller, "start no-DATA\n");
+			break;
+		} else if (request->bRequestType & USB_DIR_IN) {
+			dev_dbg(musb->controller, "start IN-DATA\n");
+			musb->ep0_stage = MUSB_EP0_IN;
+			more = true;
+			break;
+		} else {
+			dev_dbg(musb->controller, "start OUT-DATA\n");
+			musb->ep0_stage = MUSB_EP0_OUT;
+			more = true;
+		}
+		/* FALLTHROUGH */
+	case MUSB_EP0_OUT:
+		fifo_count = min_t(size_t, qh->maxpacket,
+				   urb->transfer_buffer_length -
+				   urb->actual_length);
+		if (fifo_count) {
+			fifo_dest = (u8 *) (urb->transfer_buffer
+					+ urb->actual_length);
+			dev_dbg(musb->controller, "Sending %d byte%s to ep0 fifo %p\n",
+					fifo_count,
+					(fifo_count == 1) ? "" : "s",
+					fifo_dest);
+			musb_write_fifo(hw_ep, fifo_count, fifo_dest);
+
+			urb->actual_length += fifo_count;
+			more = true;
+		}
+		break;
+	default:
+		ERR("bogus ep0 stage %d\n", musb->ep0_stage);
+		break;
+	}
+
+	return more;
+}
+
+/*
+ * Handle default endpoint interrupt as host. Only called in IRQ time
+ * from musb_interrupt().
+ *
+ * called with controller irqlocked
+ */
+irqreturn_t musb_h_ep0_irq(struct musb *musb)
+{
+	struct urb		*urb;
+	u16			csr, len;
+	int			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	bool			complete = false;
+	irqreturn_t		retval = IRQ_NONE;
+
+	/* ep0 only has one queue, "in" */
+	urb = next_urb(qh);
+
+	musb_ep_select(mbase, 0);
+	csr = musb_readw(epio, MUSB_CSR0);
+	len = (csr & MUSB_CSR0_RXPKTRDY)
+			? musb_readb(epio, MUSB_COUNT0)
+			: 0;
+
+	dev_dbg(musb->controller, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
+		csr, qh, len, urb, musb->ep0_stage);
+
+	/* if we just did status stage, we are done */
+	if (MUSB_EP0_STATUS == musb->ep0_stage) {
+		retval = IRQ_HANDLED;
+		complete = true;
+	}
+
+	/* prepare status */
+	if (csr & MUSB_CSR0_H_RXSTALL) {
+		dev_dbg(musb->controller, "STALLING ENDPOINT\n");
+		status = -EPIPE;
+
+	} else if (csr & MUSB_CSR0_H_ERROR) {
+		dev_dbg(musb->controller, "no response, csr0 %04x\n", csr);
+		status = -EPROTO;
+
+	} else if (csr & MUSB_CSR0_H_NAKTIMEOUT) {
+		dev_dbg(musb->controller, "control NAK timeout\n");
+
+		/* NOTE:  this code path would be a good place to PAUSE a
+		 * control transfer, if another one is queued, so that
+		 * ep0 is more likely to stay busy.  That's already done
+		 * for bulk RX transfers.
+		 *
+		 * if (qh->ring.next != &musb->control), then
+		 * we have a candidate... NAKing is *NOT* an error
+		 */
+		musb_writew(epio, MUSB_CSR0, 0);
+		retval = IRQ_HANDLED;
+	}
+
+	if (status) {
+		dev_dbg(musb->controller, "aborting\n");
+		retval = IRQ_HANDLED;
+		if (urb)
+			urb->status = status;
+		complete = true;
+
+		/* use the proper sequence to abort the transfer */
+		if (csr & MUSB_CSR0_H_REQPKT) {
+			csr &= ~MUSB_CSR0_H_REQPKT;
+			musb_writew(epio, MUSB_CSR0, csr);
+			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+			musb_writew(epio, MUSB_CSR0, csr);
+		} else {
+			musb_h_ep0_flush_fifo(hw_ep);
+		}
+
+		musb_writeb(epio, MUSB_NAKLIMIT0, 0);
+
+		/* clear it */
+		musb_writew(epio, MUSB_CSR0, 0);
+	}
+
+	if (unlikely(!urb)) {
+		/* stop endpoint since we have no place for its data, this
+		 * SHOULD NEVER HAPPEN! */
+		ERR("no URB for end 0\n");
+
+		musb_h_ep0_flush_fifo(hw_ep);
+		goto done;
+	}
+
+	if (!complete) {
+		/* call common logic and prepare response */
+		if (musb_h_ep0_continue(musb, len, urb)) {
+			/* more packets required */
+			csr = (MUSB_EP0_IN == musb->ep0_stage)
+				?  MUSB_CSR0_H_REQPKT : MUSB_CSR0_TXPKTRDY;
+		} else {
+			/* data transfer complete; perform status phase */
+			if (usb_pipeout(urb->pipe)
+					|| !urb->transfer_buffer_length)
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_H_REQPKT;
+			else
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_TXPKTRDY;
+
+			/* flag status stage */
+			musb->ep0_stage = MUSB_EP0_STATUS;
+
+			dev_dbg(musb->controller, "ep0 STATUS, csr %04x\n", csr);
+
+		}
+		musb_writew(epio, MUSB_CSR0, csr);
+		retval = IRQ_HANDLED;
+	} else
+		musb->ep0_stage = MUSB_EP0_IDLE;
+
+	/* call completion handler if done */
+	if (complete)
+		musb_advance_schedule(musb, urb, hw_ep, 1);
+done:
+	return retval;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side TX (OUT) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, Program Endpoint
+		- ... which starts DMA to fifo in mode 1 or 0
+
+	DMA Isr (transfer complete) -> TxAvail()
+		- Stop DMA (~DmaEnab)	(<--- Alert ... currently happens
+					only in musb_cleanup_urb)
+		- TxPktRdy has to be set in mode 0 or for
+			short packets in mode 1.
+*/
+
+#endif
+
+/* Service a Tx-Available or dma completion irq for the endpoint */
+void musb_host_tx(struct musb *musb, u8 epnum)
+{
+	int			pipe;
+	bool			done = false;
+	u16			tx_csr;
+	size_t			length = 0;
+	size_t			offset = 0;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->out_qh;
+	struct urb		*urb = next_urb(qh);
+	u32			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct dma_channel	*dma;
+	bool			transfer_pending = false;
+
+	musb_ep_select(mbase, epnum);
+	tx_csr = musb_readw(epio, MUSB_TXCSR);
+
+	/* with CPPI, DMA sometimes triggers "extra" irqs */
+	if (!urb) {
+		dev_dbg(musb->controller, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		return;
+	}
+
+	pipe = urb->pipe;
+	dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
+	dev_dbg(musb->controller, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
+			dma ? ", dma" : "");
+
+	/* check for errors */
+	if (tx_csr & MUSB_TXCSR_H_RXSTALL) {
+		/* dma was disabled, fifo flushed */
+		dev_dbg(musb->controller, "TX end %d stall\n", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (tx_csr & MUSB_TXCSR_H_ERROR) {
+		/* (NON-ISO) dma was disabled, fifo flushed */
+		dev_dbg(musb->controller, "TX 3strikes on ep=%d\n", epnum);
+
+		status = -ETIMEDOUT;
+
+	} else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) {
+		dev_dbg(musb->controller, "TX end=%d device not responding\n", epnum);
+
+		/* NOTE:  this code path would be a good place to PAUSE a
+		 * transfer, if there's some other (nonperiodic) tx urb
+		 * that could use this fifo.  (dma complicates it...)
+		 * That's already done for bulk RX transfers.
+		 *
+		 * if (bulk && qh->ring.next != &musb->out_bulk), then
+		 * we have a candidate... NAKing is *NOT* an error
+		 */
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR,
+				MUSB_TXCSR_H_WZC_BITS
+				| MUSB_TXCSR_TXPKTRDY);
+		return;
+	}
+
+	if (status) {
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+		}
+
+		/* do the proper sequence to abort the transfer in the
+		 * usb core; the dma engine should already be stopped.
+		 */
+		musb_h_tx_flush_fifo(hw_ep);
+		tx_csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAENAB
+				| MUSB_TXCSR_H_ERROR
+				| MUSB_TXCSR_H_RXSTALL
+				| MUSB_TXCSR_H_NAKTIMEOUT
+				);
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		musb_writeb(epio, MUSB_TXINTERVAL, 0);
+
+		done = true;
+	}
+
+	/* second cppi case */
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		dev_dbg(musb->controller, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		return;
+	}
+
+	if (is_dma_capable() && dma && !status) {
+		/*
+		 * DMA has completed.  But if we're using DMA mode 1 (multi
+		 * packet DMA), we need a terminal TXPKTRDY interrupt before
+		 * we can consider this transfer completed, lest we trash
+		 * its last packet when writing the next URB's data.  So we
+		 * switch back to mode 0 to get that interrupt; we'll come
+		 * back here once it happens.
+		 */
+		if (tx_csr & MUSB_TXCSR_DMAMODE) {
+			/*
+			 * We shouldn't clear DMAMODE with DMAENAB set; so
+			 * clear them in a safe order.  That should be OK
+			 * once TXPKTRDY has been set (and I've never seen
+			 * it being 0 at this moment -- DMA interrupt latency
+			 * is significant) but if it hasn't been then we have
+			 * no choice but to stop being polite and ignore the
+			 * programmer's guide... :-)
+			 *
+			 * Note that we must write TXCSR with TXPKTRDY cleared
+			 * in order not to re-trigger the packet send (this bit
+			 * can't be cleared by CPU), and there's another caveat:
+			 * TXPKTRDY may be set shortly and then cleared in the
+			 * double-buffered FIFO mode, so we do an extra TXCSR
+			 * read for debouncing...
+			 */
+			tx_csr &= musb_readw(epio, MUSB_TXCSR);
+			if (tx_csr & MUSB_TXCSR_TXPKTRDY) {
+				tx_csr &= ~(MUSB_TXCSR_DMAENAB |
+					    MUSB_TXCSR_TXPKTRDY);
+				musb_writew(epio, MUSB_TXCSR,
+					    tx_csr | MUSB_TXCSR_H_WZC_BITS);
+			}
+			tx_csr &= ~(MUSB_TXCSR_DMAMODE |
+				    MUSB_TXCSR_TXPKTRDY);
+			musb_writew(epio, MUSB_TXCSR,
+				    tx_csr | MUSB_TXCSR_H_WZC_BITS);
+
+			/*
+			 * There is no guarantee that we'll get an interrupt
+			 * after clearing DMAMODE as we might have done this
+			 * too late (after TXPKTRDY was cleared by controller).
+			 * Re-read TXCSR as we have spoiled its previous value.
+			 */
+			tx_csr = musb_readw(epio, MUSB_TXCSR);
+		}
+
+		/*
+		 * We may get here from a DMA completion or TXPKTRDY interrupt.
+		 * In any case, we must check the FIFO status here and bail out
+		 * only if the FIFO still has data -- that should prevent the
+		 * "missed" TXPKTRDY interrupts and deal with double-buffered
+		 * FIFO mode too...
+		 */
+		if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
+			dev_dbg(musb->controller, "DMA complete but packet still in FIFO, "
+			    "CSR %04x\n", tx_csr);
+			return;
+		}
+	}
+
+	if (!status || dma || usb_pipeisoc(pipe)) {
+		if (dma)
+			length = dma->actual_len;
+		else
+			length = qh->segsize;
+		qh->offset += length;
+
+		if (usb_pipeisoc(pipe)) {
+#ifndef __UBOOT__
+			struct usb_iso_packet_descriptor	*d;
+
+			d = urb->iso_frame_desc + qh->iso_idx;
+			d->actual_length = length;
+			d->status = status;
+			if (++qh->iso_idx >= urb->number_of_packets) {
+				done = true;
+			} else {
+				d++;
+				offset = d->offset;
+				length = d->length;
+			}
+#endif
+		} else if (dma && urb->transfer_buffer_length == qh->offset) {
+			done = true;
+		} else {
+			/* see if we need to send more data, or ZLP */
+			if (qh->segsize < qh->maxpacket)
+				done = true;
+			else if (qh->offset == urb->transfer_buffer_length
+					&& !(urb->transfer_flags
+						& URB_ZERO_PACKET))
+				done = true;
+			if (!done) {
+				offset = qh->offset;
+				length = urb->transfer_buffer_length - offset;
+				transfer_pending = true;
+			}
+		}
+	}
+
+	/* urb->status != -EINPROGRESS means request has been faulted,
+	 * so we must abort this transfer after cleanup
+	 */
+	if (urb->status != -EINPROGRESS) {
+		done = true;
+		if (status == 0)
+			status = urb->status;
+	}
+
+	if (done) {
+		/* set status */
+		urb->status = status;
+		urb->actual_length = qh->offset;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+		return;
+	} else if ((usb_pipeisoc(pipe) || transfer_pending) && dma) {
+		if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
+				offset, length)) {
+			if (is_cppi_enabled() || tusb_dma_omap())
+				musb_h_tx_dma_start(hw_ep);
+			return;
+		}
+	} else	if (tx_csr & MUSB_TXCSR_DMAENAB) {
+		dev_dbg(musb->controller, "not complete, but DMA enabled?\n");
+		return;
+	}
+
+	/*
+	 * PIO: start next packet in this URB.
+	 *
+	 * REVISIT: some docs say that when hw_ep->tx_double_buffered,
+	 * (and presumably, FIFO is not half-full) we should write *two*
+	 * packets before updating TXCSR; other docs disagree...
+	 */
+	if (length > qh->maxpacket)
+		length = qh->maxpacket;
+	/* Unmap the buffer so that CPU can use it */
+	usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
+	musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+	qh->segsize = length;
+
+	musb_ep_select(mbase, epnum);
+	musb_writew(epio, MUSB_TXCSR,
+			MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side RX (IN) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, ProgramEndpoint
+		- first IN token is sent out (by setting ReqPkt)
+	LinuxIsr -> RxReady()
+	/\	=> first packet is received
+	|	- Set in mode 0 (DmaEnab, ~ReqPkt)
+	|		-> DMA Isr (transfer complete) -> RxReady()
+	|		    - Ack receive (~RxPktRdy), turn off DMA (~DmaEnab)
+	|		    - if urb not complete, send next IN token (ReqPkt)
+	|			   |		else complete urb.
+	|			   |
+	---------------------------
+ *
+ * Nuances of mode 1:
+ *	For short packets, no ack (+RxPktRdy) is sent automatically
+ *	(even if AutoClear is ON)
+ *	For full packets, ack (~RxPktRdy) and next IN token (+ReqPkt) is sent
+ *	automatically => major problem, as collecting the next packet becomes
+ *	difficult. Hence mode 1 is not used.
+ *
+ * REVISIT
+ *	All we care about at this driver level is that
+ *       (a) all URBs terminate with REQPKT cleared and fifo(s) empty;
+ *       (b) termination conditions are: short RX, or buffer full;
+ *       (c) fault modes include
+ *           - iff URB_SHORT_NOT_OK, short RX status is -EREMOTEIO.
+ *             (and that endpoint's dma queue stops immediately)
+ *           - overflow (full, PLUS more bytes in the terminal packet)
+ *
+ *	So for example, usb-storage sets URB_SHORT_NOT_OK, and would
+ *	thus be a great candidate for using mode 1 ... for all but the
+ *	last packet of one URB's transfer.
+ */
+
+#endif
+
+/* Schedule next QH from musb->in_bulk and move the current qh to
+ * the end; avoids starvation for other endpoints.
+ */
+static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep)
+{
+	struct dma_channel	*dma;
+	struct urb		*urb;
+	void __iomem		*mbase = musb->mregs;
+	void __iomem		*epio = ep->regs;
+	struct musb_qh		*cur_qh, *next_qh;
+	u16			rx_csr;
+
+	musb_ep_select(mbase, ep->epnum);
+	dma = is_dma_capable() ? ep->rx_channel : NULL;
+
+	/* clear nak timeout bit */
+	rx_csr = musb_readw(epio, MUSB_RXCSR);
+	rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+	rx_csr &= ~MUSB_RXCSR_DATAERROR;
+	musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+	cur_qh = first_qh(&musb->in_bulk);
+	if (cur_qh) {
+		urb = next_urb(cur_qh);
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			musb->dma_controller->channel_abort(dma);
+			urb->actual_length += dma->actual_len;
+			dma->actual_len = 0L;
+		}
+		musb_save_toggle(cur_qh, 1, urb);
+
+		/* move cur_qh to end of queue */
+		list_move_tail(&cur_qh->ring, &musb->in_bulk);
+
+		/* get the next qh from musb->in_bulk */
+		next_qh = first_qh(&musb->in_bulk);
+
+		/* set rx_reinit and schedule the next qh */
+		ep->rx_reinit = 1;
+		musb_start_urb(musb, 1, next_qh);
+	}
+}
+
+/*
+ * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
+ * and high-bandwidth IN transfer cases.
+ */
+void musb_host_rx(struct musb *musb, u8 epnum)
+{
+	struct urb		*urb;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	size_t			xfer_len;
+	void __iomem		*mbase = musb->mregs;
+	int			pipe;
+	u16			rx_csr, val;
+	bool			iso_err = false;
+	bool			done = false;
+	u32			status;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+
+	urb = next_urb(qh);
+	dma = is_dma_capable() ? hw_ep->rx_channel : NULL;
+	status = 0;
+	xfer_len = 0;
+
+	rx_csr = musb_readw(epio, MUSB_RXCSR);
+	val = rx_csr;
+
+	if (unlikely(!urb)) {
+		/* REVISIT -- THIS SHOULD NEVER HAPPEN ... but, at least
+		 * usbtest #11 (unlinks) triggers it regularly, sometimes
+		 * with fifo full.  (Only with DMA??)
+		 */
+		dev_dbg(musb->controller, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
+			musb_readw(epio, MUSB_RXCOUNT));
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		return;
+	}
+
+	pipe = urb->pipe;
+
+	dev_dbg(musb->controller, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
+		epnum, rx_csr, urb->actual_length,
+		dma ? dma->actual_len : 0);
+
+	/* check for errors, concurrent stall & unlink is not really
+	 * handled yet! */
+	if (rx_csr & MUSB_RXCSR_H_RXSTALL) {
+		dev_dbg(musb->controller, "RX end %d STALL\n", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (rx_csr & MUSB_RXCSR_H_ERROR) {
+		dev_dbg(musb->controller, "end %d RX proto error\n", epnum);
+
+		status = -EPROTO;
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+
+	} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
+
+		if (USB_ENDPOINT_XFER_ISOC != qh->type) {
+			dev_dbg(musb->controller, "RX end %d NAK timeout\n", epnum);
+
+			/* NOTE: NAKing is *NOT* an error, so we want to
+			 * continue.  Except ... if there's a request for
+			 * another QH, use that instead of starving it.
+			 *
+			 * Devices like Ethernet and serial adapters keep
+			 * reads posted at all times, which will starve
+			 * other devices without this logic.
+			 */
+			if (usb_pipebulk(urb->pipe)
+					&& qh->mux == 1
+					&& !list_is_singular(&musb->in_bulk)) {
+				musb_bulk_rx_nak_timeout(musb, hw_ep);
+				return;
+			}
+			musb_ep_select(mbase, epnum);
+			rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+			rx_csr &= ~MUSB_RXCSR_DATAERROR;
+			musb_writew(epio, MUSB_RXCSR, rx_csr);
+
+			goto finish;
+		} else {
+			dev_dbg(musb->controller, "RX end %d ISO data error\n", epnum);
+			/* packet error reported later */
+			iso_err = true;
+		}
+	} else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
+		dev_dbg(musb->controller, "end %d high bandwidth incomplete ISO packet RX\n",
+				epnum);
+		status = -EPROTO;
+	}
+
+	/* faults abort the transfer */
+	if (status) {
+		/* clean up dma and collect transfer count */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+		}
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+		done = true;
+		goto finish;
+	}
+
+	if (unlikely(dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY)) {
+		/* SHOULD NEVER HAPPEN ... but at least DaVinci has done it */
+		ERR("RX%d dma busy, csr %04x\n", epnum, rx_csr);
+		goto finish;
+	}
+
+	/* thorough shutdown for now ... given more precise fault handling
+	 * and better queueing support, we might keep a DMA pipeline going
+	 * while processing this irq for earlier completions.
+	 */
+
+	/* FIXME this is _way_ too much in-line logic for Mentor DMA */
+
+#ifndef CONFIG_USB_INVENTRA_DMA
+	if (rx_csr & MUSB_RXCSR_H_REQPKT)  {
+		/* REVISIT this happened for a while on some short reads...
+		 * the cleanup still needs investigation... looks bad...
+		 * and also duplicates dma cleanup code above ... plus,
+		 * shouldn't this be the "half full" double buffer case?
+		 */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+			done = true;
+		}
+
+		dev_dbg(musb->controller, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
+				xfer_len, dma ? ", dma" : "");
+		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | rx_csr);
+	}
+#endif
+	if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
+		xfer_len = dma->actual_len;
+
+		val &= ~(MUSB_RXCSR_DMAENAB
+			| MUSB_RXCSR_H_AUTOREQ
+			| MUSB_RXCSR_AUTOCLEAR
+			| MUSB_RXCSR_RXPKTRDY);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, val);
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		if (usb_pipeisoc(pipe)) {
+			struct usb_iso_packet_descriptor *d;
+
+			d = urb->iso_frame_desc + qh->iso_idx;
+			d->actual_length = xfer_len;
+
+			/* even if there was an error, we did the dma
+			 * for iso_frame_desc->length
+			 */
+			if (d->status != -EILSEQ && d->status != -EOVERFLOW)
+				d->status = 0;
+
+			if (++qh->iso_idx >= urb->number_of_packets)
+				done = true;
+			else
+				done = false;
+
+		} else  {
+		/* done if urb buffer is full or short packet is recd */
+		done = (urb->actual_length + xfer_len >=
+				urb->transfer_buffer_length
+			|| dma->actual_len < qh->maxpacket);
+		}
+
+		/* send IN token for next packet, without AUTOREQ */
+		if (!done) {
+			val |= MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | val);
+		}
+
+		dev_dbg(musb->controller, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum,
+			done ? "off" : "reset",
+			musb_readw(epio, MUSB_RXCSR),
+			musb_readw(epio, MUSB_RXCOUNT));
+#else
+		done = true;
+#endif
+	} else if (urb->status == -EINPROGRESS) {
+		/* if no errors, be sure a packet is ready for unloading */
+		if (unlikely(!(rx_csr & MUSB_RXCSR_RXPKTRDY))) {
+			status = -EPROTO;
+			ERR("Rx interrupt with no errors or packet!\n");
+
+			/* FIXME this is another "SHOULD NEVER HAPPEN" */
+
+/* SCRUB (RX) */
+			/* do the proper sequence to abort the transfer */
+			musb_ep_select(mbase, epnum);
+			val &= ~MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR, val);
+			goto finish;
+		}
+
+		/* we are expecting IN packets */
+#ifdef CONFIG_USB_INVENTRA_DMA
+		if (dma) {
+			struct dma_controller	*c;
+			u16			rx_count;
+			int			ret, length;
+			dma_addr_t		buf;
+
+			rx_count = musb_readw(epio, MUSB_RXCOUNT);
+
+			dev_dbg(musb->controller, "RX%d count %d, buffer 0x%x len %d/%d\n",
+					epnum, rx_count,
+					urb->transfer_dma
+						+ urb->actual_length,
+					qh->offset,
+					urb->transfer_buffer_length);
+
+			c = musb->dma_controller;
+
+			if (usb_pipeisoc(pipe)) {
+				int d_status = 0;
+				struct usb_iso_packet_descriptor *d;
+
+				d = urb->iso_frame_desc + qh->iso_idx;
+
+				if (iso_err) {
+					d_status = -EILSEQ;
+					urb->error_count++;
+				}
+				if (rx_count > d->length) {
+					if (d_status == 0) {
+						d_status = -EOVERFLOW;
+						urb->error_count++;
+					}
+					dev_dbg(musb->controller, "** OVERFLOW %d into %d\n",\
+					    rx_count, d->length);
+
+					length = d->length;
+				} else
+					length = rx_count;
+				d->status = d_status;
+				buf = urb->transfer_dma + d->offset;
+			} else {
+				length = rx_count;
+				buf = urb->transfer_dma +
+						urb->actual_length;
+			}
+
+			dma->desired_mode = 0;
+#ifdef USE_MODE1
+			/* because of the issue below, mode 1 will
+			 * only rarely behave with correct semantics.
+			 */
+			if ((urb->transfer_flags &
+						URB_SHORT_NOT_OK)
+				&& (urb->transfer_buffer_length -
+						urb->actual_length)
+					> qh->maxpacket)
+				dma->desired_mode = 1;
+			if (rx_count < hw_ep->max_packet_sz_rx) {
+				length = rx_count;
+				dma->desired_mode = 0;
+			} else {
+				length = urb->transfer_buffer_length;
+			}
+#endif
+
+/* Disadvantage of using mode 1:
+ *	It's basically usable only for mass storage class; essentially all
+ *	other protocols also terminate transfers on short packets.
+ *
+ * Details:
+ *	An extra IN token is sent at the end of the transfer (due to AUTOREQ)
+ *	If you try to use mode 1 for (transfer_buffer_length - 512), and try
+ *	to use the extra IN token to grab the last packet using mode 0, then
+ *	the problem is that you cannot be sure when the device will send the
+ *	last packet and RxPktRdy set. Sometimes the packet is recd too soon
+ *	such that it gets lost when RxCSR is re-set at the end of the mode 1
+ *	transfer, while sometimes it is recd just a little late so that if you
+ *	try to configure for mode 0 soon after the mode 1 transfer is
+ *	completed, you will find rxcount 0. Okay, so you might think why not
+ *	wait for an interrupt when the pkt is recd. Well, you won't get any!
+ */
+
+			val = musb_readw(epio, MUSB_RXCSR);
+			val &= ~MUSB_RXCSR_H_REQPKT;
+
+			if (dma->desired_mode == 0)
+				val &= ~MUSB_RXCSR_H_AUTOREQ;
+			else
+				val |= MUSB_RXCSR_H_AUTOREQ;
+			val |= MUSB_RXCSR_DMAENAB;
+
+			/* autoclear shouldn't be set in high bandwidth */
+			if (qh->hb_mult == 1)
+				val |= MUSB_RXCSR_AUTOCLEAR;
+
+			musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | val);
+
+			/* REVISIT if when actual_length != 0,
+			 * transfer_buffer_length needs to be
+			 * adjusted first...
+			 */
+			ret = c->channel_program(
+				dma, qh->maxpacket,
+				dma->desired_mode, buf, length);
+
+			if (!ret) {
+				c->channel_release(dma);
+				hw_ep->rx_channel = NULL;
+				dma = NULL;
+				val = musb_readw(epio, MUSB_RXCSR);
+				val &= ~(MUSB_RXCSR_DMAENAB
+					| MUSB_RXCSR_H_AUTOREQ
+					| MUSB_RXCSR_AUTOCLEAR);
+				musb_writew(epio, MUSB_RXCSR, val);
+			}
+		}
+#endif	/* Mentor DMA */
+
+		if (!dma) {
+			/* Unmap the buffer so that CPU can use it */
+			usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
+			done = musb_host_packet_rx(musb, urb,
+					epnum, iso_err);
+			dev_dbg(musb->controller, "read %spacket\n", done ? "last " : "");
+		}
+	}
+
+finish:
+	urb->actual_length += xfer_len;
+	qh->offset += xfer_len;
+	if (done) {
+		if (urb->status == -EINPROGRESS)
+			urb->status = status;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN);
+	}
+}
+
+/* schedule nodes correspond to peripheral endpoints, like an OHCI QH.
+ * the software schedule associates multiple such nodes with a given
+ * host side hardware endpoint + direction; scheduling may activate
+ * that hardware endpoint.
+ */
+static int musb_schedule(
+	struct musb		*musb,
+	struct musb_qh		*qh,
+	int			is_in)
+{
+	int			idle;
+	int			best_diff;
+	int			best_end, epnum;
+	struct musb_hw_ep	*hw_ep = NULL;
+	struct list_head	*head = NULL;
+	u8			toggle;
+	u8			txtype;
+	struct urb		*urb = next_urb(qh);
+
+	/* use fixed hardware for control and bulk */
+	if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
+		head = &musb->control;
+		hw_ep = musb->control_ep;
+		goto success;
+	}
+
+	/* else, periodic transfers get muxed to other endpoints */
+
+	/*
+	 * We know this qh hasn't been scheduled, so all we need to do
+	 * is choose which hardware endpoint to put it on ...
+	 *
+	 * REVISIT what we really want here is a regular schedule tree
+	 * like e.g. OHCI uses.
+	 */
+	best_diff = 4096;
+	best_end = -1;
+
+	for (epnum = 1, hw_ep = musb->endpoints + 1;
+			epnum < musb->nr_endpoints;
+			epnum++, hw_ep++) {
+		int	diff;
+
+		if (musb_ep_get_qh(hw_ep, is_in) != NULL)
+			continue;
+
+		if (hw_ep == musb->bulk_ep)
+			continue;
+
+		if (is_in)
+			diff = hw_ep->max_packet_sz_rx;
+		else
+			diff = hw_ep->max_packet_sz_tx;
+		diff -= (qh->maxpacket * qh->hb_mult);
+
+		if (diff >= 0 && best_diff > diff) {
+
+			/*
+			 * Mentor controller has a bug in that if we schedule
+			 * a BULK Tx transfer on an endpoint that had earlier
+			 * handled ISOC then the BULK transfer has to start on
+			 * a zero toggle.  If the BULK transfer starts on a 1
+			 * toggle then this transfer will fail as the mentor
+			 * controller starts the Bulk transfer on a 0 toggle
+			 * irrespective of the programming of the toggle bits
+			 * in the TXCSR register.  Check for this condition
+			 * while allocating the EP for a Tx Bulk transfer.  If
+			 * so skip this EP.
+			 */
+			hw_ep = musb->endpoints + epnum;
+			toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in);
+			txtype = (musb_readb(hw_ep->regs, MUSB_TXTYPE)
+					>> 4) & 0x3;
+			if (!is_in && (qh->type == USB_ENDPOINT_XFER_BULK) &&
+				toggle && (txtype == USB_ENDPOINT_XFER_ISOC))
+				continue;
+
+			best_diff = diff;
+			best_end = epnum;
+		}
+	}
+	/* use bulk reserved ep1 if no other ep is free */
+	if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
+		hw_ep = musb->bulk_ep;
+		if (is_in)
+			head = &musb->in_bulk;
+		else
+			head = &musb->out_bulk;
+
+		/* Enable bulk RX NAK timeout scheme when bulk requests are
+		 * multiplexed.  This scheme doen't work in high speed to full
+		 * speed scenario as NAK interrupts are not coming from a
+		 * full speed device connected to a high speed device.
+		 * NAK timeout interval is 8 (128 uframe or 16ms) for HS and
+		 * 4 (8 frame or 8ms) for FS device.
+		 */
+		if (is_in && qh->dev)
+			qh->intv_reg =
+				(USB_SPEED_HIGH == qh->dev->speed) ? 8 : 4;
+		goto success;
+	} else if (best_end < 0) {
+		return -ENOSPC;
+	}
+
+	idle = 1;
+	qh->mux = 0;
+	hw_ep = musb->endpoints + best_end;
+	dev_dbg(musb->controller, "qh %p periodic slot %d\n", qh, best_end);
+success:
+	if (head) {
+		idle = list_empty(head);
+		list_add_tail(&qh->ring, head);
+		qh->mux = 1;
+	}
+	qh->hw_ep = hw_ep;
+	qh->hep->hcpriv = qh;
+	if (idle)
+		musb_start_urb(musb, is_in, qh);
+	return 0;
+}
+
+#ifdef __UBOOT__
+/* check if transaction translator is needed for device */
+static int tt_needed(struct musb *musb, struct usb_device *dev)
+{
+	if ((musb_readb(musb->mregs, MUSB_POWER) & MUSB_POWER_HSMODE) &&
+			(dev->speed < USB_SPEED_HIGH))
+		return 1;
+	return 0;
+}
+#endif
+
+#ifndef __UBOOT__
+static int musb_urb_enqueue(
+#else
+int musb_urb_enqueue(
+#endif
+	struct usb_hcd			*hcd,
+	struct urb			*urb,
+	gfp_t				mem_flags)
+{
+	unsigned long			flags;
+	struct musb			*musb = hcd_to_musb(hcd);
+	struct usb_host_endpoint	*hep = urb->ep;
+	struct musb_qh			*qh;
+	struct usb_endpoint_descriptor	*epd = &hep->desc;
+	int				ret;
+	unsigned			type_reg;
+	unsigned			interval;
+
+	/* host role must be active */
+	if (!is_host_active(musb) || !musb->is_active)
+		return -ENODEV;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	qh = ret ? NULL : hep->hcpriv;
+	if (qh)
+		urb->hcpriv = qh;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* DMA mapping was already done, if needed, and this urb is on
+	 * hep->urb_list now ... so we're done, unless hep wasn't yet
+	 * scheduled onto a live qh.
+	 *
+	 * REVISIT best to keep hep->hcpriv valid until the endpoint gets
+	 * disabled, testing for empty qh->ring and avoiding qh setup costs
+	 * except for the first urb queued after a config change.
+	 */
+	if (qh || ret)
+		return ret;
+
+	/* Allocate and initialize qh, minimizing the work done each time
+	 * hw_ep gets reprogrammed, or with irqs blocked.  Then schedule it.
+	 *
+	 * REVISIT consider a dedicated qh kmem_cache, so it's harder
+	 * for bugs in other kernel code to break this driver...
+	 */
+	qh = kzalloc(sizeof *qh, mem_flags);
+	if (!qh) {
+		spin_lock_irqsave(&musb->lock, flags);
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		spin_unlock_irqrestore(&musb->lock, flags);
+		return -ENOMEM;
+	}
+
+	qh->hep = hep;
+	qh->dev = urb->dev;
+	INIT_LIST_HEAD(&qh->ring);
+	qh->is_ready = 1;
+
+	qh->maxpacket = usb_endpoint_maxp(epd);
+	qh->type = usb_endpoint_type(epd);
+
+	/* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
+	 * Some musb cores don't support high bandwidth ISO transfers; and
+	 * we don't (yet!) support high bandwidth interrupt transfers.
+	 */
+	qh->hb_mult = 1 + ((qh->maxpacket >> 11) & 0x03);
+	if (qh->hb_mult > 1) {
+		int ok = (qh->type == USB_ENDPOINT_XFER_ISOC);
+
+		if (ok)
+			ok = (usb_pipein(urb->pipe) && musb->hb_iso_rx)
+				|| (usb_pipeout(urb->pipe) && musb->hb_iso_tx);
+		if (!ok) {
+			ret = -EMSGSIZE;
+			goto done;
+		}
+		qh->maxpacket &= 0x7ff;
+	}
+
+	qh->epnum = usb_endpoint_num(epd);
+
+	/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
+	qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
+
+	/* precompute rxtype/txtype/type0 register */
+	type_reg = (qh->type << 4) | qh->epnum;
+	switch (urb->dev->speed) {
+	case USB_SPEED_LOW:
+		type_reg |= 0xc0;
+		break;
+	case USB_SPEED_FULL:
+		type_reg |= 0x80;
+		break;
+	default:
+		type_reg |= 0x40;
+	}
+	qh->type_reg = type_reg;
+
+	/* Precompute RXINTERVAL/TXINTERVAL register */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_INT:
+		/*
+		 * Full/low speeds use the  linear encoding,
+		 * high speed uses the logarithmic encoding.
+		 */
+		if (urb->dev->speed <= USB_SPEED_FULL) {
+			interval = max_t(u8, epd->bInterval, 1);
+			break;
+		}
+		/* FALLTHROUGH */
+	case USB_ENDPOINT_XFER_ISOC:
+		/* ISO always uses logarithmic encoding */
+		interval = min_t(u8, epd->bInterval, 16);
+		break;
+	default:
+		/* REVISIT we actually want to use NAK limits, hinting to the
+		 * transfer scheduling logic to try some other qh, e.g. try
+		 * for 2 msec first:
+		 *
+		 * interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16 : 2;
+		 *
+		 * The downside of disabling this is that transfer scheduling
+		 * gets VERY unfair for nonperiodic transfers; a misbehaving
+		 * peripheral could make that hurt.  That's perfectly normal
+		 * for reads from network or serial adapters ... so we have
+		 * partial NAKlimit support for bulk RX.
+		 *
+		 * The upside of disabling it is simpler transfer scheduling.
+		 */
+		interval = 0;
+	}
+	qh->intv_reg = interval;
+
+	/* precompute addressing for external hub/tt ports */
+	if (musb->is_multipoint) {
+		struct usb_device	*parent = urb->dev->parent;
+
+#ifndef __UBOOT__
+		if (parent != hcd->self.root_hub) {
+#else
+		if (parent) {
+#endif
+			qh->h_addr_reg = (u8) parent->devnum;
+
+#ifndef __UBOOT__
+			/* set up tt info if needed */
+			if (urb->dev->tt) {
+				qh->h_port_reg = (u8) urb->dev->ttport;
+				if (urb->dev->tt->hub)
+					qh->h_addr_reg =
+						(u8) urb->dev->tt->hub->devnum;
+				if (urb->dev->tt->multi)
+					qh->h_addr_reg |= 0x80;
+			}
+#else
+			if (tt_needed(musb, urb->dev)) {
+				u16 hub_port = find_tt(urb->dev);
+				qh->h_addr_reg = (u8) (hub_port >> 8);
+				qh->h_port_reg = (u8) (hub_port & 0xff);
+			}
+#endif
+		}
+	}
+
+	/* invariant: hep->hcpriv is null OR the qh that's already scheduled.
+	 * until we get real dma queues (with an entry for each urb/buffer),
+	 * we only have work to do in the former case.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (hep->hcpriv) {
+		/* some concurrent activity submitted another urb to hep...
+		 * odd, rare, error prone, but legal.
+		 */
+		kfree(qh);
+		qh = NULL;
+		ret = 0;
+	} else
+		ret = musb_schedule(musb, qh,
+				epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK);
+
+	if (ret == 0) {
+		urb->hcpriv = qh;
+		/* FIXME set urb->start_frame for iso/intr, it's tested in
+		 * musb_start_urb(), but otherwise only konicawc cares ...
+		 */
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+done:
+	if (ret != 0) {
+		spin_lock_irqsave(&musb->lock, flags);
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		spin_unlock_irqrestore(&musb->lock, flags);
+		kfree(qh);
+	}
+	return ret;
+}
+
+
+#ifndef __UBOOT__
+/*
+ * abort a transfer that's at the head of a hardware queue.
+ * called with controller locked, irqs blocked
+ * that hardware queue advances to the next transfer, unless prevented
+ */
+static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
+{
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	struct musb		*musb = ep->musb;
+	void __iomem		*epio = ep->regs;
+	unsigned		hw_end = ep->epnum;
+	void __iomem		*regs = ep->musb->mregs;
+	int			is_in = usb_pipein(urb->pipe);
+	int			status = 0;
+	u16			csr;
+
+	musb_ep_select(regs, hw_end);
+
+	if (is_dma_capable()) {
+		struct dma_channel	*dma;
+
+		dma = is_in ? ep->rx_channel : ep->tx_channel;
+		if (dma) {
+			status = ep->musb->dma_controller->channel_abort(dma);
+			dev_dbg(musb->controller,
+				"abort %cX%d DMA for urb %p --> %d\n",
+				is_in ? 'R' : 'T', ep->epnum,
+				urb, status);
+			urb->actual_length += dma->actual_len;
+		}
+	}
+
+	/* turn off DMA requests, discard state, stop polling ... */
+	if (ep->epnum && is_in) {
+		/* giveback saves bulk toggle */
+		csr = musb_h_flush_rxfifo(ep, 0);
+
+		/* REVISIT we still get an irq; should likely clear the
+		 * endpoint's irq status here to avoid bogus irqs.
+		 * clearing that status is platform-specific...
+		 */
+	} else if (ep->epnum) {
+		musb_h_tx_flush_fifo(ep);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~(MUSB_TXCSR_AUTOSET
+			| MUSB_TXCSR_DMAENAB
+			| MUSB_TXCSR_H_RXSTALL
+			| MUSB_TXCSR_H_NAKTIMEOUT
+			| MUSB_TXCSR_H_ERROR
+			| MUSB_TXCSR_TXPKTRDY);
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* flush cpu writebuffer */
+		csr = musb_readw(epio, MUSB_TXCSR);
+	} else  {
+		musb_h_ep0_flush_fifo(ep);
+	}
+	if (status == 0)
+		musb_advance_schedule(ep->musb, urb, ep, is_in);
+	return status;
+}
+
+static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct musb		*musb = hcd_to_musb(hcd);
+	struct musb_qh		*qh;
+	unsigned long		flags;
+	int			is_in  = usb_pipein(urb->pipe);
+	int			ret;
+
+	dev_dbg(musb->controller, "urb=%p, dev%d ep%d%s\n", urb,
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe),
+			is_in ? "in" : "out");
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto done;
+
+	qh = urb->hcpriv;
+	if (!qh)
+		goto done;
+
+	/*
+	 * Any URB not actively programmed into endpoint hardware can be
+	 * immediately given back; that's any URB not at the head of an
+	 * endpoint queue, unless someday we get real DMA queues.  And even
+	 * if it's at the head, it might not be known to the hardware...
+	 *
+	 * Otherwise abort current transfer, pending DMA, etc.; urb->status
+	 * has already been updated.  This is a synchronous abort; it'd be
+	 * OK to hold off until after some IRQ, though.
+	 *
+	 * NOTE: qh is invalid unless !list_empty(&hep->urb_list)
+	 */
+	if (!qh->is_ready
+			|| urb->urb_list.prev != &qh->hep->urb_list
+			|| musb_ep_get_qh(qh->hw_ep, is_in) != qh) {
+		int	ready = qh->is_ready;
+
+		qh->is_ready = 0;
+		musb_giveback(musb, urb, 0);
+		qh->is_ready = ready;
+
+		/* If nothing else (usually musb_giveback) is using it
+		 * and its URB list has emptied, recycle this qh.
+		 */
+		if (ready && list_empty(&qh->hep->urb_list)) {
+			qh->hep->hcpriv = NULL;
+			list_del(&qh->ring);
+			kfree(qh);
+		}
+	} else
+		ret = musb_cleanup_urb(urb, qh);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return ret;
+}
+
+/* disable an endpoint */
+static void
+musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+{
+	u8			is_in = hep->desc.bEndpointAddress & USB_DIR_IN;
+	unsigned long		flags;
+	struct musb		*musb = hcd_to_musb(hcd);
+	struct musb_qh		*qh;
+	struct urb		*urb;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	qh = hep->hcpriv;
+	if (qh == NULL)
+		goto exit;
+
+	/* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
+
+	/* Kick the first URB off the hardware, if needed */
+	qh->is_ready = 0;
+	if (musb_ep_get_qh(qh->hw_ep, is_in) == qh) {
+		urb = next_urb(qh);
+
+		/* make software (then hardware) stop ASAP */
+		if (!urb->unlinked)
+			urb->status = -ESHUTDOWN;
+
+		/* cleanup */
+		musb_cleanup_urb(urb, qh);
+
+		/* Then nuke all the others ... and advance the
+		 * queue on hw_ep (e.g. bulk ring) when we're done.
+		 */
+		while (!list_empty(&hep->urb_list)) {
+			urb = next_urb(qh);
+			urb->status = -ESHUTDOWN;
+			musb_advance_schedule(musb, urb, qh->hw_ep, is_in);
+		}
+	} else {
+		/* Just empty the queue; the hardware is busy with
+		 * other transfers, and since !qh->is_ready nothing
+		 * will activate any of these as it advances.
+		 */
+		while (!list_empty(&hep->urb_list))
+			musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
+
+		hep->hcpriv = NULL;
+		list_del(&qh->ring);
+		kfree(qh);
+	}
+exit:
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int musb_h_get_frame_number(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	return musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_h_start(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	/* NOTE: musb_start() is called when the hub driver turns
+	 * on port power, or when (OTG) peripheral starts.
+	 */
+	hcd->state = HC_STATE_RUNNING;
+	musb->port1_status = 0;
+	return 0;
+}
+
+static void musb_h_stop(struct usb_hcd *hcd)
+{
+	musb_stop(hcd_to_musb(hcd));
+	hcd->state = HC_STATE_HALT;
+}
+
+static int musb_bus_suspend(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	u8		devctl;
+
+	if (!is_host_active(musb))
+		return 0;
+
+	switch (musb->xceiv->state) {
+	case OTG_STATE_A_SUSPEND:
+		return 0;
+	case OTG_STATE_A_WAIT_VRISE:
+		/* ID could be grounded even if there's no device
+		 * on the other end of the cable.  NOTE that the
+		 * A_WAIT_VRISE timers are messy with MUSB...
+		 */
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+		break;
+	default:
+		break;
+	}
+
+	if (musb->is_active) {
+		WARNING("trying to suspend as %s while active\n",
+				otg_state_string(musb->xceiv->state));
+		return -EBUSY;
+	} else
+		return 0;
+}
+
+static int musb_bus_resume(struct usb_hcd *hcd)
+{
+	/* resuming child port does the work */
+	return 0;
+}
+
+const struct hc_driver musb_hc_driver = {
+	.description		= "musb-hcd",
+	.product_desc		= "MUSB HDRC host driver",
+	.hcd_priv_size		= sizeof(struct musb),
+	.flags			= HCD_USB2 | HCD_MEMORY,
+
+	/* not using irq handler or reset hooks from usbcore, since
+	 * those must be shared with peripheral code for OTG configs
+	 */
+
+	.start			= musb_h_start,
+	.stop			= musb_h_stop,
+
+	.get_frame_number	= musb_h_get_frame_number,
+
+	.urb_enqueue		= musb_urb_enqueue,
+	.urb_dequeue		= musb_urb_dequeue,
+	.endpoint_disable	= musb_h_disable,
+
+	.hub_status_data	= musb_hub_status_data,
+	.hub_control		= musb_hub_control,
+	.bus_suspend		= musb_bus_suspend,
+	.bus_resume		= musb_bus_resume,
+	/* .start_port_reset	= NULL, */
+	/* .hub_irq_enable	= NULL, */
+};
+#endif
diff --git a/drivers/usb/musb-new/musb_host.h b/drivers/usb/musb-new/musb_host.h
new file mode 100644
index 0000000..ebebe0c
--- /dev/null
+++ b/drivers/usb/musb-new/musb_host.h
@@ -0,0 +1,114 @@
+/*
+ * MUSB OTG driver host defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef _MUSB_HOST_H
+#define _MUSB_HOST_H
+#ifdef __UBOOT__
+#include "usb-compat.h"
+#endif
+
+static inline struct usb_hcd *musb_to_hcd(struct musb *musb)
+{
+	return container_of((void *) musb, struct usb_hcd, hcd_priv);
+}
+
+static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
+{
+	return (struct musb *) (hcd->hcd_priv);
+}
+
+/* stored in "usb_host_endpoint.hcpriv" for scheduled endpoints */
+struct musb_qh {
+	struct usb_host_endpoint *hep;		/* usbcore info */
+	struct usb_device	*dev;
+	struct musb_hw_ep	*hw_ep;		/* current binding */
+
+	struct list_head	ring;		/* of musb_qh */
+	/* struct musb_qh		*next; */	/* for periodic tree */
+	u8			mux;		/* qh multiplexed to hw_ep */
+
+	unsigned		offset;		/* in urb->transfer_buffer */
+	unsigned		segsize;	/* current xfer fragment */
+
+	u8			type_reg;	/* {rx,tx} type register */
+	u8			intv_reg;	/* {rx,tx} interval register */
+	u8			addr_reg;	/* device address register */
+	u8			h_addr_reg;	/* hub address register */
+	u8			h_port_reg;	/* hub port register */
+
+	u8			is_ready;	/* safe to modify hw_ep */
+	u8			type;		/* XFERTYPE_* */
+	u8			epnum;
+	u8			hb_mult;	/* high bandwidth pkts per uf */
+	u16			maxpacket;
+	u16			frame;		/* for periodic schedule */
+	unsigned		iso_idx;	/* in urb->iso_frame_desc[] */
+};
+
+/* map from control or bulk queue head to the first qh on that ring */
+static inline struct musb_qh *first_qh(struct list_head *q)
+{
+	if (list_empty(q))
+		return NULL;
+	return list_entry(q->next, struct musb_qh, ring);
+}
+
+
+extern void musb_root_disconnect(struct musb *musb);
+
+struct usb_hcd;
+
+extern int musb_hub_status_data(struct usb_hcd *hcd, char *buf);
+extern int musb_hub_control(struct usb_hcd *hcd,
+			u16 typeReq, u16 wValue, u16 wIndex,
+			char *buf, u16 wLength);
+
+extern const struct hc_driver musb_hc_driver;
+
+static inline struct urb *next_urb(struct musb_qh *qh)
+{
+	struct list_head	*queue;
+
+	if (!qh)
+		return NULL;
+	queue = &qh->hep->urb_list;
+	if (list_empty(queue))
+		return NULL;
+	return list_entry(queue->next, struct urb, urb_list);
+}
+
+#ifdef __UBOOT__
+int musb_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
+#endif
+#endif				/* _MUSB_HOST_H */
diff --git a/drivers/usb/musb-new/musb_io.h b/drivers/usb/musb-new/musb_io.h
new file mode 100644
index 0000000..51730ae
--- /dev/null
+++ b/drivers/usb/musb-new/musb_io.h
@@ -0,0 +1,146 @@
+/*
+ * MUSB OTG driver register I/O
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_PLATFORM_ARCH_H__
+#define __MUSB_LINUX_PLATFORM_ARCH_H__
+
+#ifndef __UBOOT__
+#include <linux/io.h>
+#else
+#include <asm/io.h>
+#endif
+
+#if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \
+	&& !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \
+	&& !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN) \
+	&& !defined(CONFIG_MIPS) && !defined(CONFIG_M68K)
+static inline void readsl(const void __iomem *addr, void *buf, int len)
+	{ insl((unsigned long)addr, buf, len); }
+static inline void readsw(const void __iomem *addr, void *buf, int len)
+	{ insw((unsigned long)addr, buf, len); }
+static inline void readsb(const void __iomem *addr, void *buf, int len)
+	{ insb((unsigned long)addr, buf, len); }
+
+static inline void writesl(const void __iomem *addr, const void *buf, int len)
+	{ outsl((unsigned long)addr, buf, len); }
+static inline void writesw(const void __iomem *addr, const void *buf, int len)
+	{ outsw((unsigned long)addr, buf, len); }
+static inline void writesb(const void __iomem *addr, const void *buf, int len)
+	{ outsb((unsigned long)addr, buf, len); }
+
+#endif
+
+#ifndef CONFIG_BLACKFIN
+
+/* NOTE:  these offsets are all in bytes */
+
+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+	{ return __raw_readw(addr + offset); }
+
+static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
+	{ return __raw_readl(addr + offset); }
+
+
+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
+	{ __raw_writew(data, addr + offset); }
+
+static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
+	{ __raw_writel(data, addr + offset); }
+
+
+#if defined(CONFIG_USB_MUSB_TUSB6010) || defined (CONFIG_USB_MUSB_TUSB6010_MODULE)
+
+/*
+ * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
+ */
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+{
+	u16 tmp;
+	u8 val;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		val = (tmp >> 8);
+	else
+		val = tmp & 0xff;
+
+	return val;
+}
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		tmp = (data << 8) | (tmp & 0xff);
+	else
+		tmp = (tmp & 0xff00) | data;
+
+	__raw_writew(tmp, addr + (offset & ~1));
+}
+
+#else
+
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+	{ return __raw_readb(addr + offset); }
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+	{ __raw_writeb(data, addr + offset); }
+
+#endif	/* CONFIG_USB_MUSB_TUSB6010 */
+
+#else
+
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+	{ return (u8) (bfin_read16(addr + offset)); }
+
+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+	{ return bfin_read16(addr + offset); }
+
+static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
+	{ return (u32) (bfin_read16(addr + offset)); }
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+	{ bfin_write16(addr + offset, (u16) data); }
+
+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
+	{ bfin_write16(addr + offset, data); }
+
+static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
+	{ bfin_write16(addr + offset, (u16) data); }
+
+#endif /* CONFIG_BLACKFIN */
+
+#endif
diff --git a/drivers/usb/musb-new/musb_regs.h b/drivers/usb/musb-new/musb_regs.h
new file mode 100644
index 0000000..03f2655
--- /dev/null
+++ b/drivers/usb/musb-new/musb_regs.h
@@ -0,0 +1,645 @@
+/*
+ * MUSB OTG driver register defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_REGS_H__
+#define __MUSB_REGS_H__
+
+#define MUSB_EP0_FIFOSIZE	64	/* This is non-configurable */
+
+/*
+ * MUSB Register bits
+ */
+
+/* POWER */
+#define MUSB_POWER_ISOUPDATE	0x80
+#define MUSB_POWER_SOFTCONN	0x40
+#define MUSB_POWER_HSENAB	0x20
+#define MUSB_POWER_HSMODE	0x10
+#define MUSB_POWER_RESET	0x08
+#define MUSB_POWER_RESUME	0x04
+#define MUSB_POWER_SUSPENDM	0x02
+#define MUSB_POWER_ENSUSPEND	0x01
+
+/* INTRUSB */
+#define MUSB_INTR_SUSPEND	0x01
+#define MUSB_INTR_RESUME	0x02
+#define MUSB_INTR_RESET		0x04
+#define MUSB_INTR_BABBLE	0x04
+#define MUSB_INTR_SOF		0x08
+#define MUSB_INTR_CONNECT	0x10
+#define MUSB_INTR_DISCONNECT	0x20
+#define MUSB_INTR_SESSREQ	0x40
+#define MUSB_INTR_VBUSERROR	0x80	/* For SESSION end */
+
+/* DEVCTL */
+#define MUSB_DEVCTL_BDEVICE	0x80
+#define MUSB_DEVCTL_FSDEV	0x40
+#define MUSB_DEVCTL_LSDEV	0x20
+#define MUSB_DEVCTL_VBUS	0x18
+#define MUSB_DEVCTL_VBUS_SHIFT	3
+#define MUSB_DEVCTL_HM		0x04
+#define MUSB_DEVCTL_HR		0x02
+#define MUSB_DEVCTL_SESSION	0x01
+
+/* MUSB ULPI VBUSCONTROL */
+#define MUSB_ULPI_USE_EXTVBUS	0x01
+#define MUSB_ULPI_USE_EXTVBUSIND 0x02
+/* ULPI_REG_CONTROL */
+#define MUSB_ULPI_REG_REQ	(1 << 0)
+#define MUSB_ULPI_REG_CMPLT	(1 << 1)
+#define MUSB_ULPI_RDN_WR	(1 << 2)
+
+/* TESTMODE */
+#define MUSB_TEST_FORCE_HOST	0x80
+#define MUSB_TEST_FIFO_ACCESS	0x40
+#define MUSB_TEST_FORCE_FS	0x20
+#define MUSB_TEST_FORCE_HS	0x10
+#define MUSB_TEST_PACKET	0x08
+#define MUSB_TEST_K		0x04
+#define MUSB_TEST_J		0x02
+#define MUSB_TEST_SE0_NAK	0x01
+
+/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
+#define MUSB_FIFOSZ_DPB	0x10
+/* Allocation size (8, 16, 32, ... 4096) */
+#define MUSB_FIFOSZ_SIZE	0x0f
+
+/* CSR0 */
+#define MUSB_CSR0_FLUSHFIFO	0x0100
+#define MUSB_CSR0_TXPKTRDY	0x0002
+#define MUSB_CSR0_RXPKTRDY	0x0001
+
+/* CSR0 in Peripheral mode */
+#define MUSB_CSR0_P_SVDSETUPEND	0x0080
+#define MUSB_CSR0_P_SVDRXPKTRDY	0x0040
+#define MUSB_CSR0_P_SENDSTALL	0x0020
+#define MUSB_CSR0_P_SETUPEND	0x0010
+#define MUSB_CSR0_P_DATAEND	0x0008
+#define MUSB_CSR0_P_SENTSTALL	0x0004
+
+/* CSR0 in Host mode */
+#define MUSB_CSR0_H_DIS_PING		0x0800
+#define MUSB_CSR0_H_WR_DATATOGGLE	0x0400	/* Set to allow setting: */
+#define MUSB_CSR0_H_DATATOGGLE		0x0200	/* Data toggle control */
+#define MUSB_CSR0_H_NAKTIMEOUT		0x0080
+#define MUSB_CSR0_H_STATUSPKT		0x0040
+#define MUSB_CSR0_H_REQPKT		0x0020
+#define MUSB_CSR0_H_ERROR		0x0010
+#define MUSB_CSR0_H_SETUPPKT		0x0008
+#define MUSB_CSR0_H_RXSTALL		0x0004
+
+/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_CSR0_P_WZC_BITS	\
+	(MUSB_CSR0_P_SENTSTALL)
+#define MUSB_CSR0_H_WZC_BITS	\
+	(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
+	| MUSB_CSR0_RXPKTRDY)
+
+/* TxType/RxType */
+#define MUSB_TYPE_SPEED		0xc0
+#define MUSB_TYPE_SPEED_SHIFT	6
+#define MUSB_TYPE_PROTO		0x30	/* Implicitly zero for ep0 */
+#define MUSB_TYPE_PROTO_SHIFT	4
+#define MUSB_TYPE_REMOTE_END	0xf	/* Implicitly zero for ep0 */
+
+/* CONFIGDATA */
+#define MUSB_CONFIGDATA_MPRXE		0x80	/* Auto bulk pkt combining */
+#define MUSB_CONFIGDATA_MPTXE		0x40	/* Auto bulk pkt splitting */
+#define MUSB_CONFIGDATA_BIGENDIAN	0x20
+#define MUSB_CONFIGDATA_HBRXE		0x10	/* HB-ISO for RX */
+#define MUSB_CONFIGDATA_HBTXE		0x08	/* HB-ISO for TX */
+#define MUSB_CONFIGDATA_DYNFIFO		0x04	/* Dynamic FIFO sizing */
+#define MUSB_CONFIGDATA_SOFTCONE	0x02	/* SoftConnect */
+#define MUSB_CONFIGDATA_UTMIDW		0x01	/* Data width 0/1 => 8/16bits */
+
+/* TXCSR in Peripheral and Host mode */
+#define MUSB_TXCSR_AUTOSET		0x8000
+#define MUSB_TXCSR_DMAENAB		0x1000
+#define MUSB_TXCSR_FRCDATATOG		0x0800
+#define MUSB_TXCSR_DMAMODE		0x0400
+#define MUSB_TXCSR_CLRDATATOG		0x0040
+#define MUSB_TXCSR_FLUSHFIFO		0x0008
+#define MUSB_TXCSR_FIFONOTEMPTY		0x0002
+#define MUSB_TXCSR_TXPKTRDY		0x0001
+
+/* TXCSR in Peripheral mode */
+#define MUSB_TXCSR_P_ISO		0x4000
+#define MUSB_TXCSR_P_INCOMPTX		0x0080
+#define MUSB_TXCSR_P_SENTSTALL		0x0020
+#define MUSB_TXCSR_P_SENDSTALL		0x0010
+#define MUSB_TXCSR_P_UNDERRUN		0x0004
+
+/* TXCSR in Host mode */
+#define MUSB_TXCSR_H_WR_DATATOGGLE	0x0200
+#define MUSB_TXCSR_H_DATATOGGLE		0x0100
+#define MUSB_TXCSR_H_NAKTIMEOUT		0x0080
+#define MUSB_TXCSR_H_RXSTALL		0x0020
+#define MUSB_TXCSR_H_ERROR		0x0004
+
+/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_TXCSR_P_WZC_BITS	\
+	(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
+	| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
+#define MUSB_TXCSR_H_WZC_BITS	\
+	(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
+	| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
+
+/* RXCSR in Peripheral and Host mode */
+#define MUSB_RXCSR_AUTOCLEAR		0x8000
+#define MUSB_RXCSR_DMAENAB		0x2000
+#define MUSB_RXCSR_DISNYET		0x1000
+#define MUSB_RXCSR_PID_ERR		0x1000
+#define MUSB_RXCSR_DMAMODE		0x0800
+#define MUSB_RXCSR_INCOMPRX		0x0100
+#define MUSB_RXCSR_CLRDATATOG		0x0080
+#define MUSB_RXCSR_FLUSHFIFO		0x0010
+#define MUSB_RXCSR_DATAERROR		0x0008
+#define MUSB_RXCSR_FIFOFULL		0x0002
+#define MUSB_RXCSR_RXPKTRDY		0x0001
+
+/* RXCSR in Peripheral mode */
+#define MUSB_RXCSR_P_ISO		0x4000
+#define MUSB_RXCSR_P_SENTSTALL		0x0040
+#define MUSB_RXCSR_P_SENDSTALL		0x0020
+#define MUSB_RXCSR_P_OVERRUN		0x0004
+
+/* RXCSR in Host mode */
+#define MUSB_RXCSR_H_AUTOREQ		0x4000
+#define MUSB_RXCSR_H_WR_DATATOGGLE	0x0400
+#define MUSB_RXCSR_H_DATATOGGLE		0x0200
+#define MUSB_RXCSR_H_RXSTALL		0x0040
+#define MUSB_RXCSR_H_REQPKT		0x0020
+#define MUSB_RXCSR_H_ERROR		0x0004
+
+/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_RXCSR_P_WZC_BITS	\
+	(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
+	| MUSB_RXCSR_RXPKTRDY)
+#define MUSB_RXCSR_H_WZC_BITS	\
+	(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
+	| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
+
+/* HUBADDR */
+#define MUSB_HUBADDR_MULTI_TT		0x80
+
+
+#ifndef CONFIG_BLACKFIN
+
+/*
+ * Common USB registers
+ */
+
+#define MUSB_FADDR		0x00	/* 8-bit */
+#define MUSB_POWER		0x01	/* 8-bit */
+
+#define MUSB_INTRTX		0x02	/* 16-bit */
+#define MUSB_INTRRX		0x04
+#define MUSB_INTRTXE		0x06
+#define MUSB_INTRRXE		0x08
+#define MUSB_INTRUSB		0x0A	/* 8 bit */
+#define MUSB_INTRUSBE		0x0B	/* 8 bit */
+#define MUSB_FRAME		0x0C
+#define MUSB_INDEX		0x0E	/* 8 bit */
+#define MUSB_TESTMODE		0x0F	/* 8 bit */
+
+/* Get offset for a given FIFO from musb->mregs */
+#if defined(CONFIG_USB_MUSB_TUSB6010) ||	\
+	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+#define MUSB_FIFO_OFFSET(epnum)	(0x200 + ((epnum) * 0x20))
+#else
+#define MUSB_FIFO_OFFSET(epnum)	(0x20 + ((epnum) * 4))
+#endif
+
+/*
+ * Additional Control Registers
+ */
+
+#define MUSB_DEVCTL		0x60	/* 8 bit */
+
+/* These are always controlled through the INDEX register */
+#define MUSB_TXFIFOSZ		0x62	/* 8-bit (see masks) */
+#define MUSB_RXFIFOSZ		0x63	/* 8-bit (see masks) */
+#define MUSB_TXFIFOADD		0x64	/* 16-bit offset shifted right 3 */
+#define MUSB_RXFIFOADD		0x66	/* 16-bit offset shifted right 3 */
+
+/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
+#define MUSB_HWVERS		0x6C	/* 8 bit */
+#define MUSB_ULPI_BUSCONTROL	0x70	/* 8 bit */
+#define MUSB_ULPI_INT_MASK	0x72	/* 8 bit */
+#define MUSB_ULPI_INT_SRC	0x73	/* 8 bit */
+#define MUSB_ULPI_REG_DATA	0x74	/* 8 bit */
+#define MUSB_ULPI_REG_ADDR	0x75	/* 8 bit */
+#define MUSB_ULPI_REG_CONTROL	0x76	/* 8 bit */
+#define MUSB_ULPI_RAW_DATA	0x77	/* 8 bit */
+
+#define MUSB_EPINFO		0x78	/* 8 bit */
+#define MUSB_RAMINFO		0x79	/* 8 bit */
+#define MUSB_LINKINFO		0x7a	/* 8 bit */
+#define MUSB_VPLEN		0x7b	/* 8 bit */
+#define MUSB_HS_EOF1		0x7c	/* 8 bit */
+#define MUSB_FS_EOF1		0x7d	/* 8 bit */
+#define MUSB_LS_EOF1		0x7e	/* 8 bit */
+
+/* Offsets to endpoint registers */
+#define MUSB_TXMAXP		0x00
+#define MUSB_TXCSR		0x02
+#define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
+#define MUSB_RXMAXP		0x04
+#define MUSB_RXCSR		0x06
+#define MUSB_RXCOUNT		0x08
+#define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
+#define MUSB_TXTYPE		0x0A
+#define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
+#define MUSB_TXINTERVAL		0x0B
+#define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
+#define MUSB_RXTYPE		0x0C
+#define MUSB_RXINTERVAL		0x0D
+#define MUSB_FIFOSIZE		0x0F
+#define MUSB_CONFIGDATA		MUSB_FIFOSIZE	/* Re-used for EP0 */
+
+/* Offsets to endpoint registers in indexed model (using INDEX register) */
+#define MUSB_INDEXED_OFFSET(_epnum, _offset)	\
+	(0x10 + (_offset))
+
+/* Offsets to endpoint registers in flat models */
+#define MUSB_FLAT_OFFSET(_epnum, _offset)	\
+	(0x100 + (0x10*(_epnum)) + (_offset))
+
+#if defined(CONFIG_USB_MUSB_TUSB6010) ||	\
+	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+/* TUSB6010 EP0 configuration register is special */
+#define MUSB_TUSB_OFFSET(_epnum, _offset)	\
+	(0x10 + _offset)
+#include "tusb6010.h"		/* Needed "only" for TUSB_EP0_CONF */
+#endif
+
+#define MUSB_TXCSR_MODE			0x2000
+
+/* "bus control"/target registers, for host side multipoint (external hubs) */
+#define MUSB_TXFUNCADDR		0x00
+#define MUSB_TXHUBADDR		0x02
+#define MUSB_TXHUBPORT		0x03
+
+#define MUSB_RXFUNCADDR		0x04
+#define MUSB_RXHUBADDR		0x06
+#define MUSB_RXHUBPORT		0x07
+
+#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
+	(0x80 + (8*(_epnum)) + (_offset))
+
+static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
+{
+	musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+}
+
+static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
+{
+	musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+}
+
+static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
+{
+	musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+}
+
+static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
+{
+	musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+}
+
+static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
+{
+	musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val);
+}
+
+static inline u8 musb_read_txfifosz(void __iomem *mbase)
+{
+	return musb_readb(mbase, MUSB_TXFIFOSZ);
+}
+
+static inline u16 musb_read_txfifoadd(void __iomem *mbase)
+{
+	return musb_readw(mbase, MUSB_TXFIFOADD);
+}
+
+static inline u8 musb_read_rxfifosz(void __iomem *mbase)
+{
+	return musb_readb(mbase, MUSB_RXFIFOSZ);
+}
+
+static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
+{
+	return musb_readw(mbase, MUSB_RXFIFOADD);
+}
+
+static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
+{
+	return musb_readb(mbase, MUSB_ULPI_BUSCONTROL);
+}
+
+static inline u8 musb_read_configdata(void __iomem *mbase)
+{
+	musb_writeb(mbase, MUSB_INDEX, 0);
+	return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
+}
+
+static inline u16 musb_read_hwvers(void __iomem *mbase)
+{
+	return musb_readw(mbase, MUSB_HWVERS);
+}
+
+static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
+{
+	return (MUSB_BUSCTL_OFFSET(i, 0) + mbase);
+}
+
+static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
+		u8 qh_addr_reg)
+{
+	musb_writeb(ep_target_regs, MUSB_RXFUNCADDR, qh_addr_reg);
+}
+
+static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
+		u8 qh_h_addr_reg)
+{
+	musb_writeb(ep_target_regs, MUSB_RXHUBADDR, qh_h_addr_reg);
+}
+
+static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
+		u8 qh_h_port_reg)
+{
+	musb_writeb(ep_target_regs, MUSB_RXHUBPORT, qh_h_port_reg);
+}
+
+static inline void  musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
+		u8 qh_addr_reg)
+{
+	musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
+			qh_addr_reg);
+}
+
+static inline void  musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
+		u8 qh_addr_reg)
+{
+	musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
+			qh_addr_reg);
+}
+
+static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
+		u8 qh_h_port_reg)
+{
+	musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
+			qh_h_port_reg);
+}
+
+static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR));
+}
+
+static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR));
+}
+
+static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT));
+}
+
+static inline u8  musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR));
+}
+
+static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR));
+}
+
+static inline u8  musb_read_txhubport(void __iomem *mbase, u8 epnum)
+{
+	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT));
+}
+
+#else /* CONFIG_BLACKFIN */
+
+#define USB_BASE		USB_FADDR
+#define USB_OFFSET(reg)		(reg - USB_BASE)
+
+/*
+ * Common USB registers
+ */
+#define MUSB_FADDR		USB_OFFSET(USB_FADDR)	/* 8-bit */
+#define MUSB_POWER		USB_OFFSET(USB_POWER)	/* 8-bit */
+#define MUSB_INTRTX		USB_OFFSET(USB_INTRTX)	/* 16-bit */
+#define MUSB_INTRRX		USB_OFFSET(USB_INTRRX)
+#define MUSB_INTRTXE		USB_OFFSET(USB_INTRTXE)
+#define MUSB_INTRRXE		USB_OFFSET(USB_INTRRXE)
+#define MUSB_INTRUSB		USB_OFFSET(USB_INTRUSB)	/* 8 bit */
+#define MUSB_INTRUSBE		USB_OFFSET(USB_INTRUSBE)/* 8 bit */
+#define MUSB_FRAME		USB_OFFSET(USB_FRAME)
+#define MUSB_INDEX		USB_OFFSET(USB_INDEX)	/* 8 bit */
+#define MUSB_TESTMODE		USB_OFFSET(USB_TESTMODE)/* 8 bit */
+
+/* Get offset for a given FIFO from musb->mregs */
+#define MUSB_FIFO_OFFSET(epnum)	\
+	(USB_OFFSET(USB_EP0_FIFO) + ((epnum) * 8))
+
+/*
+ * Additional Control Registers
+ */
+
+#define MUSB_DEVCTL		USB_OFFSET(USB_OTG_DEV_CTL)	/* 8 bit */
+
+#define MUSB_LINKINFO		USB_OFFSET(USB_LINKINFO)/* 8 bit */
+#define MUSB_VPLEN		USB_OFFSET(USB_VPLEN)	/* 8 bit */
+#define MUSB_HS_EOF1		USB_OFFSET(USB_HS_EOF1)	/* 8 bit */
+#define MUSB_FS_EOF1		USB_OFFSET(USB_FS_EOF1)	/* 8 bit */
+#define MUSB_LS_EOF1		USB_OFFSET(USB_LS_EOF1)	/* 8 bit */
+
+/* Offsets to endpoint registers */
+#define MUSB_TXMAXP		0x00
+#define MUSB_TXCSR		0x04
+#define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
+#define MUSB_RXMAXP		0x08
+#define MUSB_RXCSR		0x0C
+#define MUSB_RXCOUNT		0x10
+#define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
+#define MUSB_TXTYPE		0x14
+#define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
+#define MUSB_TXINTERVAL		0x18
+#define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
+#define MUSB_RXTYPE		0x1C
+#define MUSB_RXINTERVAL		0x20
+#define MUSB_TXCOUNT		0x28
+
+/* Offsets to endpoint registers in indexed model (using INDEX register) */
+#define MUSB_INDEXED_OFFSET(_epnum, _offset)	\
+	(0x40 + (_offset))
+
+/* Offsets to endpoint registers in flat models */
+#define MUSB_FLAT_OFFSET(_epnum, _offset)	\
+	(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
+
+/* Not implemented - HW has separate Tx/Rx FIFO */
+#define MUSB_TXCSR_MODE			0x0000
+
+static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
+{
+}
+
+static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
+{
+}
+
+static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
+{
+}
+
+static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
+{
+}
+
+static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
+{
+}
+
+static inline u8 musb_read_txfifosz(void __iomem *mbase)
+{
+	return 0;
+}
+
+static inline u16 musb_read_txfifoadd(void __iomem *mbase)
+{
+	return 0;
+}
+
+static inline u8 musb_read_rxfifosz(void __iomem *mbase)
+{
+	return 0;
+}
+
+static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
+{
+	return 0;
+}
+
+static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
+{
+	return 0;
+}
+
+static inline u8 musb_read_configdata(void __iomem *mbase)
+{
+	return 0;
+}
+
+static inline u16 musb_read_hwvers(void __iomem *mbase)
+{
+	/*
+	 * This register is invisible on Blackfin, actually the MUSB
+	 * RTL version of Blackfin is 1.9, so just harcode its value.
+	 */
+	return MUSB_HWVERS_1900;
+}
+
+static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
+{
+	return NULL;
+}
+
+static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
+		u8 qh_addr_req)
+{
+}
+
+static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
+		u8 qh_h_addr_reg)
+{
+}
+
+static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
+		u8 qh_h_port_reg)
+{
+}
+
+static inline void  musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
+		u8 qh_addr_reg)
+{
+}
+
+static inline void  musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
+		u8 qh_addr_reg)
+{
+}
+
+static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
+		u8 qh_h_port_reg)
+{
+}
+
+static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
+{
+	return 0;
+}
+
+static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
+{
+	return 0;
+}
+
+static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
+{
+	return 0;
+}
+
+static inline u8  musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
+{
+	return 0;
+}
+
+static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
+{
+	return 0;
+}
+
+static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
+{
+	return 0;
+}
+
+#endif /* CONFIG_BLACKFIN */
+
+#endif	/* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c
new file mode 100644
index 0000000..762cbc1
--- /dev/null
+++ b/drivers/usb/musb-new/musb_uboot.c
@@ -0,0 +1,237 @@
+#include <common.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#define __UBOOT__
+#include <usb.h>
+#include "linux-compat.h"
+#include "usb-compat.h"
+#include "musb_core.h"
+#include "musb_host.h"
+#include "musb_gadget.h"
+
+#ifdef CONFIG_MUSB_HOST
+static struct musb *host;
+static struct usb_hcd hcd;
+static enum usb_device_speed host_speed;
+
+static void musb_host_complete_urb(struct urb *urb)
+{
+	urb->dev->status &= ~USB_ST_NOT_PROC;
+	urb->dev->act_len = urb->actual_length;
+}
+
+static struct usb_host_endpoint hep;
+static struct urb urb;
+
+static struct urb *construct_urb(struct usb_device *dev, int endpoint_type,
+				unsigned long pipe, void *buffer, int len,
+				struct devrequest *setup, int interval)
+{
+	int epnum = usb_pipeendpoint(pipe);
+	int is_in = usb_pipein(pipe);
+
+	memset(&urb, 0, sizeof(struct urb));
+	memset(&hep, 0, sizeof(struct usb_host_endpoint));
+	INIT_LIST_HEAD(&hep.urb_list);
+	INIT_LIST_HEAD(&urb.urb_list);
+	urb.ep = &hep;
+	urb.complete = musb_host_complete_urb;
+	urb.status = -EINPROGRESS;
+	urb.dev = dev;
+	urb.pipe = pipe;
+	urb.transfer_buffer = buffer;
+	urb.transfer_dma = (unsigned long)buffer;
+	urb.transfer_buffer_length = len;
+	urb.setup_packet = (unsigned char *)setup;
+
+	urb.ep->desc.wMaxPacketSize =
+		__cpu_to_le16(is_in ? dev->epmaxpacketin[epnum] :
+				dev->epmaxpacketout[epnum]);
+	urb.ep->desc.bmAttributes = endpoint_type;
+	urb.ep->desc.bEndpointAddress =
+		(is_in ? USB_DIR_IN : USB_DIR_OUT) | epnum;
+	urb.ep->desc.bInterval = interval;
+
+	return &urb;
+}
+
+#define MUSB_HOST_TIMEOUT	0x3ffffff
+
+static int submit_urb(struct usb_hcd *hcd, struct urb *urb)
+{
+	struct musb *host = hcd->hcd_priv;
+	int ret;
+	int timeout;
+
+	ret = musb_urb_enqueue(hcd, urb, 0);
+	if (ret < 0) {
+		printf("Failed to enqueue URB to controller\n");
+		return ret;
+	}
+
+	timeout = MUSB_HOST_TIMEOUT;
+	do {
+		if (ctrlc())
+			return -EIO;
+		host->isr(0, host);
+	} while ((urb->dev->status & USB_ST_NOT_PROC) && --timeout);
+
+	return urb->status;
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe,
+			void *buffer, int len, struct devrequest *setup)
+{
+	struct urb *urb = construct_urb(dev, USB_ENDPOINT_XFER_CONTROL, pipe,
+					buffer, len, setup, 0);
+
+	/* Fix speed for non hub-attached devices */
+	if (!dev->parent)
+		dev->speed = host_speed;
+
+	return submit_urb(&hcd, urb);
+}
+
+
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
+					void *buffer, int len)
+{
+	struct urb *urb = construct_urb(dev, USB_ENDPOINT_XFER_BULK, pipe,
+					buffer, len, NULL, 0);
+	return submit_urb(&hcd, urb);
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe,
+				void *buffer, int len, int interval)
+{
+	struct urb *urb = construct_urb(dev, USB_ENDPOINT_XFER_INT, pipe,
+					buffer, len, NULL, interval);
+	return submit_urb(&hcd, urb);
+}
+
+int usb_lowlevel_init(int index, void **controller)
+{
+	u8 power;
+	void *mbase;
+	int timeout = MUSB_HOST_TIMEOUT;
+
+	if (!host) {
+		printf("MUSB host is not registered\n");
+		return -ENODEV;
+	}
+
+	musb_start(host);
+	mbase = host->mregs;
+	do {
+		if (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_HM)
+			break;
+	} while (--timeout);
+	if (!timeout)
+		return -ENODEV;
+
+	power = musb_readb(mbase, MUSB_POWER);
+	musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power);
+	udelay(30000);
+	power = musb_readb(mbase, MUSB_POWER);
+	musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power);
+	host->isr(0, host);
+	host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ?
+			USB_SPEED_HIGH :
+			(musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_FSDEV) ?
+			USB_SPEED_FULL : USB_SPEED_LOW;
+	host->is_active = 1;
+	hcd.hcd_priv = host;
+
+	return 0;
+}
+
+int usb_lowlevel_stop(int index)
+{
+	if (!host) {
+		printf("MUSB host is not registered\n");
+		return -ENODEV;
+	}
+
+	musb_stop(host);
+	return 0;
+}
+#endif /* CONFIG_MUSB_HOST */
+
+#ifdef CONFIG_MUSB_GADGET
+static struct musb *gadget;
+
+int usb_gadget_handle_interrupts(void)
+{
+	if (!gadget || !gadget->isr)
+		return -EINVAL;
+
+	return gadget->isr(0, gadget);
+}
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	int ret;
+
+	if (!driver || driver->speed < USB_SPEED_HIGH || !driver->bind ||
+	    !driver->setup) {
+		printf("bad parameter.\n");
+		return -EINVAL;
+	}
+
+	if (!gadget) {
+		printf("Controller uninitialized\n");
+		return -ENXIO;
+	}
+
+	ret = musb_gadget_start(&gadget->g, driver);
+	if (ret < 0) {
+		printf("gadget_start failed with %d\n", ret);
+		return ret;
+	}
+
+	ret = driver->bind(&gadget->g);
+	if (ret < 0) {
+		printf("bind failed with %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	/* TODO: implement me */
+	return 0;
+}
+#endif /* CONFIG_MUSB_GADGET */
+
+int musb_register(struct musb_hdrc_platform_data *plat, void *bdata,
+			void *ctl_regs)
+{
+	struct musb **musbp;
+
+	switch (plat->mode) {
+#ifdef CONFIG_MUSB_HOST
+	case MUSB_HOST:
+		musbp = &host;
+		break;
+#endif
+#ifdef CONFIG_MUSB_GADGET
+	case MUSB_PERIPHERAL:
+		musbp = &gadget;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	*musbp = musb_init_controller(plat, (struct device *)bdata, ctl_regs);
+	if (!musbp) {
+		printf("Failed to init the controller\n");
+		return -EIO;
+	}
+
+	return 0;
+}
diff --git a/drivers/usb/musb-new/omap2430.c b/drivers/usb/musb-new/omap2430.c
new file mode 100644
index 0000000..b1c4dc7
--- /dev/null
+++ b/drivers/usb/musb-new/omap2430.c
@@ -0,0 +1,626 @@
+/*
+ * Copyright (C) 2005-2007 by Texas Instruments
+ * Some code has been taken from tusb6010.c
+ * Copyrights for that are attributable to:
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#define __UBOOT__
+#ifndef __UBOOT__
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm_runtime.h>
+#include <linux/err.h>
+#include <linux/usb/musb-omap.h>
+#else
+#include <common.h>
+#include <asm/omap_musb.h>
+#include <twl4030.h>
+#include "linux-compat.h"
+#endif
+
+#include "musb_core.h"
+#include "omap2430.h"
+
+#ifndef __UBOOT__
+struct omap2430_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	enum omap_musb_vbus_id_status status;
+	struct work_struct	omap_musb_mailbox_work;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
+
+struct omap2430_glue		*_glue;
+
+static struct timer_list musb_idle_timer;
+
+static void musb_do_idle(unsigned long _musb)
+{
+	struct musb	*musb = (void *)_musb;
+	unsigned long	flags;
+	u8	power;
+	u8	devctl;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv->state) {
+	case OTG_STATE_A_WAIT_BCON:
+
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE) {
+			musb->xceiv->state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		} else {
+			musb->xceiv->state = OTG_STATE_A_IDLE;
+			MUSB_HST_MODE(musb);
+		}
+		break;
+	case OTG_STATE_A_SUSPEND:
+		/* finish RESUME signaling? */
+		if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
+			power = musb_readb(musb->mregs, MUSB_POWER);
+			power &= ~MUSB_POWER_RESUME;
+			dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power);
+			musb_writeb(musb->mregs, MUSB_POWER, power);
+			musb->is_active = 1;
+			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
+						| MUSB_PORT_STAT_RESUME);
+			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+			usb_hcd_poll_rh_status(musb_to_hcd(musb));
+			/* NOTE: it might really be A_WAIT_BCON ... */
+			musb->xceiv->state = OTG_STATE_A_HOST;
+		}
+		break;
+	case OTG_STATE_A_HOST:
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl &  MUSB_DEVCTL_BDEVICE)
+			musb->xceiv->state = OTG_STATE_B_IDLE;
+		else
+			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+
+static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
+	static unsigned long	last_timer;
+
+	if (timeout == 0)
+		timeout = default_timeout;
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || ((musb->a_wait_bcon == 0)
+			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
+		dev_dbg(musb->controller, "%s active, deleting timer\n",
+			otg_state_string(musb->xceiv->state));
+		del_timer(&musb_idle_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout)) {
+		if (!timer_pending(&musb_idle_timer))
+			last_timer = timeout;
+		else {
+			dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
+			return;
+		}
+	}
+	last_timer = timeout;
+
+	dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
+		otg_state_string(musb->xceiv->state),
+		(unsigned long)jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb_idle_timer, timeout);
+}
+
+static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
+{
+	struct usb_otg	*otg = musb->xceiv->otg;
+	u8		devctl;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	int ret = 1;
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		if (musb->xceiv->state == OTG_STATE_A_IDLE) {
+			/* start the session */
+			devctl |= MUSB_DEVCTL_SESSION;
+			musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+			/*
+			 * Wait for the musb to set as A device to enable the
+			 * VBUS
+			 */
+			while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
+
+				cpu_relax();
+
+				if (time_after(jiffies, timeout)) {
+					dev_err(musb->controller,
+					"configured as A device timeout");
+					ret = -EINVAL;
+					break;
+				}
+			}
+
+			if (ret && otg->set_vbus)
+				otg_set_vbus(otg, 1);
+		} else {
+			musb->is_active = 1;
+			otg->default_a = 1;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+			devctl |= MUSB_DEVCTL_SESSION;
+			MUSB_HST_MODE(musb);
+		}
+	} else {
+		musb->is_active = 0;
+
+		/* NOTE:  we're skipping A_WAIT_VFALL -> A_IDLE and
+		 * jumping right to B_IDLE...
+		 */
+
+		otg->default_a = 0;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
+		devctl &= ~MUSB_DEVCTL_SESSION;
+
+		MUSB_DEV_MODE(musb);
+	}
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	dev_dbg(musb->controller, "VBUS %s, devctl %02x "
+		/* otg %3x conf %08x prcm %08x */ "\n",
+		otg_state_string(musb->xceiv->state),
+		musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+
+static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
+{
+	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	devctl |= MUSB_DEVCTL_SESSION;
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	return 0;
+}
+#endif
+
+static inline void omap2430_low_level_exit(struct musb *musb)
+{
+	u32 l;
+
+	/* in any role */
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l |= ENABLEFORCE;	/* enable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+}
+
+static inline void omap2430_low_level_init(struct musb *musb)
+{
+	u32 l;
+
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+}
+
+#ifndef __UBOOT__
+void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
+{
+	struct omap2430_glue	*glue = _glue;
+	struct musb		*musb = glue_to_musb(glue);
+
+	glue->status = status;
+	if (!musb) {
+		dev_err(glue->dev, "musb core is not yet ready\n");
+		return;
+	}
+
+	schedule_work(&glue->omap_musb_mailbox_work);
+}
+EXPORT_SYMBOL_GPL(omap_musb_mailbox);
+
+static void omap_musb_set_mailbox(struct omap2430_glue *glue)
+{
+	struct musb *musb = glue_to_musb(glue);
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *pdata = dev->platform_data;
+	struct omap_musb_board_data *data = pdata->board_data;
+	struct usb_otg *otg = musb->xceiv->otg;
+
+	switch (glue->status) {
+	case OMAP_MUSB_ID_GROUND:
+		dev_dbg(dev, "ID GND\n");
+
+		otg->default_a = true;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
+		musb->xceiv->last_event = USB_EVENT_ID;
+		if (!is_otg_enabled(musb) || musb->gadget_driver) {
+			pm_runtime_get_sync(dev);
+			usb_phy_init(musb->xceiv);
+			omap2430_musb_set_vbus(musb, 1);
+		}
+		break;
+
+	case OMAP_MUSB_VBUS_VALID:
+		dev_dbg(dev, "VBUS Connect\n");
+
+		otg->default_a = false;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
+		musb->xceiv->last_event = USB_EVENT_VBUS;
+		if (musb->gadget_driver)
+			pm_runtime_get_sync(dev);
+		usb_phy_init(musb->xceiv);
+		break;
+
+	case OMAP_MUSB_ID_FLOAT:
+	case OMAP_MUSB_VBUS_OFF:
+		dev_dbg(dev, "VBUS Disconnect\n");
+
+		musb->xceiv->last_event = USB_EVENT_NONE;
+		if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
+			if (musb->gadget_driver) {
+				pm_runtime_mark_last_busy(dev);
+				pm_runtime_put_autosuspend(dev);
+			}
+
+		if (data->interface_type == MUSB_INTERFACE_UTMI) {
+			if (musb->xceiv->otg->set_vbus)
+				otg_set_vbus(musb->xceiv->otg, 0);
+		}
+		usb_phy_shutdown(musb->xceiv);
+		break;
+	default:
+		dev_dbg(dev, "ID float\n");
+	}
+}
+
+
+static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
+{
+	struct omap2430_glue *glue = container_of(mailbox_work,
+				struct omap2430_glue, omap_musb_mailbox_work);
+	omap_musb_set_mailbox(glue);
+}
+#endif
+
+static int omap2430_musb_init(struct musb *musb)
+{
+	u32 l;
+	int status = 0;
+#ifndef __UBOOT__
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+#else
+	struct omap_musb_board_data *data =
+		(struct omap_musb_board_data *)musb->controller;
+#endif
+
+
+#ifndef __UBOOT__
+	/* We require some kind of external transceiver, hooked
+	 * up through ULPI.  TWL4030-family PMICs include one,
+	 * which needs a driver, drivers aren't always needed.
+	 */
+	musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
+		pr_err("HS USB OTG: no transceiver configured\n");
+		return -ENODEV;
+	}
+
+	status = pm_runtime_get_sync(dev);
+	if (status < 0) {
+		dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
+		goto err1;
+	}
+#endif
+
+	l = musb_readl(musb->mregs, OTG_INTERFSEL);
+
+	if (data->interface_type == MUSB_INTERFACE_UTMI) {
+		/* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
+		l &= ~ULPI_12PIN;       /* Disable ULPI */
+		l |= UTMI_8BIT;         /* Enable UTMI  */
+	} else {
+		l |= ULPI_12PIN;
+	}
+
+	musb_writel(musb->mregs, OTG_INTERFSEL, l);
+
+	pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
+			"sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
+			musb_readl(musb->mregs, OTG_REVISION),
+			musb_readl(musb->mregs, OTG_SYSCONFIG),
+			musb_readl(musb->mregs, OTG_SYSSTATUS),
+			musb_readl(musb->mregs, OTG_INTERFSEL),
+			musb_readl(musb->mregs, OTG_SIMENABLE));
+
+#ifndef __UBOOT__
+	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+
+	if (glue->status != OMAP_MUSB_UNKNOWN)
+		omap_musb_set_mailbox(glue);
+
+	pm_runtime_put_noidle(musb->controller);
+#endif
+	return 0;
+
+err1:
+	return status;
+}
+
+static void omap2430_musb_enable(struct musb *musb)
+{
+#ifndef __UBOOT__
+	u8		devctl;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+	struct musb_hdrc_platform_data *pdata = dev->platform_data;
+	struct omap_musb_board_data *data = pdata->board_data;
+
+	switch (glue->status) {
+
+	case OMAP_MUSB_ID_GROUND:
+		usb_phy_init(musb->xceiv);
+		if (data->interface_type != MUSB_INTERFACE_UTMI)
+			break;
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		/* start the session */
+		devctl |= MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+		while (musb_readb(musb->mregs, MUSB_DEVCTL) &
+				MUSB_DEVCTL_BDEVICE) {
+			cpu_relax();
+
+			if (time_after(jiffies, timeout)) {
+				dev_err(dev, "configured as A device timeout");
+				break;
+			}
+		}
+		break;
+
+	case OMAP_MUSB_VBUS_VALID:
+		usb_phy_init(musb->xceiv);
+		break;
+
+	default:
+		break;
+	}
+#else
+#ifdef CONFIG_TWL4030_USB
+	if (twl4030_usb_ulpi_init()) {
+		serial_printf("ERROR: %s Could not initialize PHY\n",
+				__PRETTY_FUNCTION__);
+	}
+#endif
+#endif
+}
+
+static void omap2430_musb_disable(struct musb *musb)
+{
+#ifndef __UBOOT__
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+
+	if (glue->status != OMAP_MUSB_UNKNOWN)
+		usb_phy_shutdown(musb->xceiv);
+#endif
+}
+
+static int omap2430_musb_exit(struct musb *musb)
+{
+	del_timer_sync(&musb_idle_timer);
+
+	omap2430_low_level_exit(musb);
+
+	return 0;
+}
+
+#ifndef __UBOOT__
+static const struct musb_platform_ops omap2430_ops = {
+#else
+const struct musb_platform_ops omap2430_ops = {
+#endif
+	.init		= omap2430_musb_init,
+	.exit		= omap2430_musb_exit,
+
+#ifndef __UBOOT__
+	.set_mode	= omap2430_musb_set_mode,
+	.try_idle	= omap2430_musb_try_idle,
+
+	.set_vbus	= omap2430_musb_set_vbus,
+#endif
+
+	.enable		= omap2430_musb_enable,
+	.disable	= omap2430_musb_disable,
+};
+
+#ifndef __UBOOT__
+static u64 omap2430_dmamask = DMA_BIT_MASK(32);
+
+static int __devinit omap2430_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct omap2430_glue		*glue;
+	int				ret = -ENOMEM;
+
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err0;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &omap2430_dmamask;
+	musb->dev.coherent_dma_mask	= omap2430_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->status			= OMAP_MUSB_UNKNOWN;
+
+	pdata->platform_ops		= &omap2430_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	/*
+	 * REVISIT if we ever have two instances of the wrapper, we will be
+	 * in big trouble
+	 */
+	_glue	= glue;
+
+	INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err1;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err1;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err1;
+	}
+
+	return 0;
+
+err1:
+	platform_device_put(musb);
+
+err0:
+	return ret;
+}
+
+static int __devexit omap2430_remove(struct platform_device *pdev)
+{
+	struct omap2430_glue		*glue = platform_get_drvdata(pdev);
+
+	cancel_work_sync(&glue->omap_musb_mailbox_work);
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int omap2430_runtime_suspend(struct device *dev)
+{
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+
+	if (musb) {
+		musb->context.otg_interfsel = musb_readl(musb->mregs,
+				OTG_INTERFSEL);
+
+		omap2430_low_level_exit(musb);
+		usb_phy_set_suspend(musb->xceiv, 1);
+	}
+
+	return 0;
+}
+
+static int omap2430_runtime_resume(struct device *dev)
+{
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+
+	if (musb) {
+		omap2430_low_level_init(musb);
+		musb_writel(musb->mregs, OTG_INTERFSEL,
+				musb->context.otg_interfsel);
+
+		usb_phy_set_suspend(musb->xceiv, 0);
+	}
+
+	return 0;
+}
+
+static struct dev_pm_ops omap2430_pm_ops = {
+	.runtime_suspend = omap2430_runtime_suspend,
+	.runtime_resume = omap2430_runtime_resume,
+};
+
+#define DEV_PM_OPS	(&omap2430_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver omap2430_driver = {
+	.probe		= omap2430_probe,
+	.remove		= __devexit_p(omap2430_remove),
+	.driver		= {
+		.name	= "musb-omap2430",
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init omap2430_init(void)
+{
+	return platform_driver_register(&omap2430_driver);
+}
+subsys_initcall(omap2430_init);
+
+static void __exit omap2430_exit(void)
+{
+	platform_driver_unregister(&omap2430_driver);
+}
+module_exit(omap2430_exit);
+#endif
diff --git a/drivers/usb/musb-new/omap2430.h b/drivers/usb/musb-new/omap2430.h
new file mode 100644
index 0000000..3b795c2
--- /dev/null
+++ b/drivers/usb/musb-new/omap2430.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_OMAP243X_H__
+#define __MUSB_OMAP243X_H__
+
+#ifndef __UBOOT__
+#include <plat/usb.h>
+#else
+#undef RESETDONE
+#endif
+
+/*
+ * OMAP2430-specific definitions
+ */
+
+#define OTG_REVISION		0x400
+
+#define OTG_SYSCONFIG		0x404
+#	define	MIDLEMODE	12	/* bit position */
+#	define	FORCESTDBY		(0 << MIDLEMODE)
+#	define	NOSTDBY			(1 << MIDLEMODE)
+#	define	SMARTSTDBY		(2 << MIDLEMODE)
+
+#	define	SIDLEMODE		3	/* bit position */
+#	define	FORCEIDLE		(0 << SIDLEMODE)
+#	define	NOIDLE			(1 << SIDLEMODE)
+#	define	SMARTIDLE		(2 << SIDLEMODE)
+
+#	define	ENABLEWAKEUP		(1 << 2)
+#	define	SOFTRST			(1 << 1)
+#	define	AUTOIDLE		(1 << 0)
+
+#define OTG_SYSSTATUS		0x408
+#	define	RESETDONE		(1 << 0)
+
+#define OTG_INTERFSEL		0x40c
+#	define	EXTCP			(1 << 2)
+#	define	PHYSEL			0	/* bit position */
+#	define	UTMI_8BIT		(0 << PHYSEL)
+#	define	ULPI_12PIN		(1 << PHYSEL)
+#	define	ULPI_8PIN		(2 << PHYSEL)
+
+#define OTG_SIMENABLE		0x410
+#	define	TM1			(1 << 0)
+
+#define OTG_FORCESTDBY		0x414
+#	define	ENABLEFORCE		(1 << 0)
+
+#endif	/* __MUSB_OMAP243X_H__ */
diff --git a/drivers/usb/musb-new/usb-compat.h b/drivers/usb/musb-new/usb-compat.h
new file mode 100644
index 0000000..27f656f
--- /dev/null
+++ b/drivers/usb/musb-new/usb-compat.h
@@ -0,0 +1,88 @@
+#ifndef __USB_COMPAT_H__
+#define __USB_COMPAT_H__
+
+#include "usb.h"
+
+struct usb_hcd {
+	void *hcd_priv;
+};
+
+struct usb_host_endpoint {
+	struct usb_endpoint_descriptor		desc;
+	struct list_head urb_list;
+	void *hcpriv;
+};
+
+/*
+ * urb->transfer_flags:
+ *
+ * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb().
+ */
+#define URB_SHORT_NOT_OK	0x0001	/* report short reads as errors */
+#define URB_ZERO_PACKET		0x0040	/* Finish bulk OUT with short packet */
+
+struct urb;
+
+typedef void (*usb_complete_t)(struct urb *);
+
+struct urb {
+	void *hcpriv;			/* private data for host controller */
+	struct list_head urb_list;	/* list head for use by the urb's
+					 * current owner */
+	struct usb_device *dev;		/* (in) pointer to associated device */
+	struct usb_host_endpoint *ep;	/* (internal) pointer to endpoint */
+	unsigned int pipe;		/* (in) pipe information */
+	int status;			/* (return) non-ISO status */
+	unsigned int transfer_flags;	/* (in) URB_SHORT_NOT_OK | ...*/
+	void *transfer_buffer;		/* (in) associated data buffer */
+	dma_addr_t transfer_dma;	/* (in) dma addr for transfer_buffer */
+	u32 transfer_buffer_length;	/* (in) data buffer length */
+	u32 actual_length;		/* (return) actual transfer length */
+	unsigned char *setup_packet;	/* (in) setup packet (control only) */
+	int start_frame;		/* (modify) start frame (ISO) */
+	usb_complete_t complete;	/* (in) completion routine */
+};
+
+#define usb_hcd_link_urb_to_ep(hcd, urb)	({		\
+	int ret = 0;						\
+	list_add_tail(&urb->urb_list, &urb->ep->urb_list);	\
+	ret; })
+#define usb_hcd_unlink_urb_from_ep(hcd, urb)	list_del_init(&urb->urb_list)
+
+static inline void usb_hcd_giveback_urb(struct usb_hcd *hcd,
+					struct urb *urb,
+					int status)
+{
+	urb->status = status;
+	if (urb->complete)
+		urb->complete(urb);
+}
+
+static inline int usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd,
+					struct urb *urb)
+{
+	/* TODO: add cache invalidation here */
+	return 0;
+}
+
+static inline u16 find_tt(struct usb_device *dev)
+{
+	u8 chid;
+	u8 hub;
+
+	/* Find out the nearest parent which is high speed */
+	while (dev->parent->parent != NULL)
+		if (dev->parent->speed != USB_SPEED_HIGH)
+			dev = dev->parent;
+		else
+			break;
+
+	/* determine the port address at that hub */
+	hub = dev->parent->devnum;
+	for (chid = 0; chid < USB_MAXCHILDREN; chid++)
+		if (dev->parent->children[chid] == dev)
+			break;
+
+	return (hub << 8) | chid;
+}
+#endif /* __USB_COMPAT_H__ */
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index e914369..ec8a038 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -34,7 +34,6 @@
 #ifndef __MUSB_HDRC_DEFS_H__
 #define __MUSB_HDRC_DEFS_H__
 
-#include <usb.h>
 #include <usb_defs.h>
 #include <asm/io.h>
 
@@ -145,7 +144,7 @@ struct musb_regs {
 		struct musb_epN_regs epN;
 	} ep[16];
 
-} __attribute__((packed, aligned(USB_DMA_MINALIGN)));
+} __attribute__((packed));
 #endif
 
 /*
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 06be38d..60e03a4 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <usb.h>
 #include "musb_hcd.h"
 
 /* MSC control transfers */
@@ -485,8 +486,8 @@ static int ctrlreq_in_status_phase(struct usb_device *dev)
  */
 static u8 get_dev_speed(struct usb_device *dev)
 {
-	return (dev->speed & USB_SPEED_HIGH) ? MUSB_TYPE_SPEED_HIGH :
-		((dev->speed & USB_SPEED_LOW) ? MUSB_TYPE_SPEED_LOW :
+	return (dev->speed == USB_SPEED_HIGH) ? MUSB_TYPE_SPEED_HIGH :
+		((dev->speed == USB_SPEED_LOW) ? MUSB_TYPE_SPEED_LOW :
 						MUSB_TYPE_SPEED_FULL);
 }
 
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index b3207c8..170a358 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -40,6 +40,7 @@ COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
 COBJS-$(CONFIG_LD9040) += ld9040.o
 COBJS-$(CONFIG_SED156X) += sed156x.o
 COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
+COBJS-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o
 COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
 COBJS-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
 COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c
index beb7fa3..b10ca4b 100644
--- a/drivers/video/atmel_hlcdfb.c
+++ b/drivers/video/atmel_hlcdfb.c
@@ -51,6 +51,18 @@ short console_row;
 #define lcdc_readl(reg)		__raw_readl((reg))
 #define lcdc_writel(reg, val)	__raw_writel((val), (reg))
 
+/*
+ * the CLUT register map as following
+ * RCLUT(24 ~ 16), GCLUT(15 ~ 8), BCLUT(7 ~ 0)
+ */
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+{
+	lcdc_writel(((red << LCDC_BASECLUT_RCLUT_Pos) & LCDC_BASECLUT_RCLUT_Msk)
+		| ((green << LCDC_BASECLUT_GCLUT_Pos) & LCDC_BASECLUT_GCLUT_Msk)
+		| ((blue << LCDC_BASECLUT_BCLUT_Pos) & LCDC_BASECLUT_BCLUT_Msk),
+		panel_info.mmio + ATMEL_LCDC_LUT(regno));
+}
+
 void lcd_ctrl_init(void *lcdbase)
 {
 	unsigned long value;
diff --git a/drivers/video/bus_vcxk.c b/drivers/video/bus_vcxk.c
index 9c4714d..a0607cf 100644
--- a/drivers/video/bus_vcxk.c
+++ b/drivers/video/bus_vcxk.c
@@ -153,7 +153,7 @@ int vcxk_init(unsigned long width, unsigned long height)
 #ifdef CONFIG_SYS_VCXK_DOUBLEBUFFERED
 	double_bws_word  = (u_short *)double_bws;
 	double_bws_long  = (u_long *)double_bws;
-	debug("%lx %lx %lx \n", double_bws, double_bws_word, double_bws_long);
+	debug("%px %px %px\n", double_bws, double_bws_word, double_bws_long);
 #endif
 	display_width  = width;
 	display_height = height;
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 9c67b63..26f673a 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -1515,6 +1515,13 @@ int video_display_bitmap(ulong bmp_image, int x, int y)
 
 	padded_line = (((width * bpp + 7) / 8) + 3) & ~0x3;
 
+	/*
+	 * Just ignore elements which are completely beyond screen
+	 * dimensions.
+	 */
+	if ((x >= VIDEO_VISIBLE_COLS) || (y >= VIDEO_VISIBLE_ROWS))
+		return 0;
+
 #ifdef CONFIG_SPLASH_SCREEN_ALIGN
 	if (x == BMP_ALIGN_CENTER)
 		x = max(0, (VIDEO_VISIBLE_COLS - width) / 2);
@@ -2257,3 +2264,47 @@ int drv_video_init(void)
 	/* Return success */
 	return 1;
 }
+
+void video_position_cursor(unsigned col, unsigned row)
+{
+	console_col = min(col, CONSOLE_COLS - 1);
+	console_row = min(row, CONSOLE_ROWS - 1);
+}
+
+int video_get_pixel_width(void)
+{
+	return VIDEO_VISIBLE_COLS;
+}
+
+int video_get_pixel_height(void)
+{
+	return VIDEO_VISIBLE_ROWS;
+}
+
+int video_get_screen_rows(void)
+{
+	return CONSOLE_ROWS;
+}
+
+int video_get_screen_columns(void)
+{
+	return CONSOLE_COLS;
+}
+
+void video_clear(void)
+{
+	if (!video_fb_address)
+		return;
+#ifdef VIDEO_HW_RECTFILL
+	video_hw_rectfill(VIDEO_PIXEL_SIZE,	/* bytes per pixel */
+			  0,			/* dest pos x */
+			  0,			/* dest pos y */
+			  VIDEO_VISIBLE_COLS,	/* frame width */
+			  VIDEO_VISIBLE_ROWS,	/* frame height */
+			  bgx			/* fill color */
+	);
+#else
+	memsetl(video_fb_address,
+		(VIDEO_VISIBLE_ROWS * VIDEO_LINE_LEN) / sizeof(int), bgx);
+#endif
+}
diff --git a/drivers/video/coreboot_fb.c b/drivers/video/coreboot_fb.c
new file mode 100644
index 0000000..d93bd89
--- /dev/null
+++ b/drivers/video/coreboot_fb.c
@@ -0,0 +1,101 @@
+/*
+ * coreboot Framebuffer driver.
+ *
+ * Copyright (C) 2011 The Chromium OS authors
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/tables.h>
+#include <asm/arch/sysinfo.h>
+#include <video_fb.h>
+#include "videomodes.h"
+
+/*
+ * The Graphic Device
+ */
+GraphicDevice ctfb;
+
+static int parse_coreboot_table_fb(GraphicDevice *gdev)
+{
+	struct cb_framebuffer *fb = lib_sysinfo.framebuffer;
+
+	/* If there is no framebuffer structure, bail out and keep
+	 * running on the serial console.
+	 */
+	if (!fb)
+		return 0;
+
+	gdev->winSizeX = fb->x_resolution;
+	gdev->winSizeY = fb->y_resolution;
+
+	gdev->plnSizeX = fb->x_resolution;
+	gdev->plnSizeY = fb->y_resolution;
+
+	gdev->gdfBytesPP = fb->bits_per_pixel / 8;
+
+	switch (fb->bits_per_pixel) {
+	case 24:
+		gdev->gdfIndex = GDF_32BIT_X888RGB;
+		break;
+	case 16:
+		gdev->gdfIndex = GDF_16BIT_565RGB;
+		break;
+	default:
+		gdev->gdfIndex = GDF__8BIT_INDEX;
+		break;
+	}
+
+	gdev->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
+	gdev->pciBase = (unsigned int)fb->physical_address;
+
+	gdev->frameAdrs = (unsigned int)fb->physical_address;
+	gdev->memSize = fb->bytes_per_line * fb->y_resolution;
+
+	gdev->vprBase = (unsigned int)fb->physical_address;
+	gdev->cprBase = (unsigned int)fb->physical_address;
+
+	return 1;
+}
+
+void *video_hw_init(void)
+{
+	GraphicDevice *gdev = &ctfb;
+	int bits_per_pixel;
+
+	printf("Video: ");
+
+	if (!parse_coreboot_table_fb(gdev)) {
+		printf("No video mode configured in coreboot!\n");
+		return NULL;
+	}
+
+	bits_per_pixel = gdev->gdfBytesPP * 8;
+
+	/* fill in Graphic device struct */
+	sprintf(gdev->modeIdent, "%dx%dx%d", gdev->winSizeX, gdev->winSizeY,
+		 bits_per_pixel);
+	printf("%s\n", gdev->modeIdent);
+
+	memset((void *)gdev->pciBase, 0,
+		gdev->winSizeX * gdev->winSizeY * gdev->gdfBytesPP);
+
+	return (void *)gdev;
+}
diff --git a/drivers/video/ipu_common.c b/drivers/video/ipu_common.c
index 0f2d113..ad4af52 100644
--- a/drivers/video/ipu_common.c
+++ b/drivers/video/ipu_common.c
@@ -94,6 +94,7 @@ struct ipu_ch_param {
 	temp1; \
 })
 
+#define IPU_SW_RST_TOUT_USEC	(10000)
 
 void clk_enable(struct clk *clk)
 {
@@ -398,11 +399,20 @@ void ipu_reset(void)
 {
 	u32 *reg;
 	u32 value;
+	int timeout = IPU_SW_RST_TOUT_USEC;
 
 	reg = (u32 *)SRC_BASE_ADDR;
 	value = __raw_readl(reg);
 	value = value | SW_IPU_RST;
 	__raw_writel(value, reg);
+
+	while (__raw_readl(reg) & SW_IPU_RST) {
+		udelay(1);
+		if (!(timeout--)) {
+			printf("ipu software reset timeout\n");
+			break;
+		}
+	};
 }
 
 /*
diff --git a/fs/cbfs/Makefile b/fs/cbfs/Makefile
index 2be8a68..e0e6de6 100644
--- a/fs/cbfs/Makefile
+++ b/fs/cbfs/Makefile
@@ -1,6 +1,4 @@
-#
-# See file CREDITS for list of people who contributed to this
-# project.
+# Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
diff --git a/fs/cbfs/cbfs.c b/fs/cbfs/cbfs.c
index cae6d56..1b25a15 100644
--- a/fs/cbfs/cbfs.c
+++ b/fs/cbfs/cbfs.c
@@ -1,9 +1,6 @@
 /*
  * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
diff --git a/fs/ext4/dev.c b/fs/ext4/dev.c
index 1596a92..464a67d 100644
--- a/fs/ext4/dev.c
+++ b/fs/ext4/dev.c
@@ -52,6 +52,7 @@ void ext4fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info)
 	part_info = info;
 	part_offset = info->start;
 	get_fs()->total_sect = (info->size * info->blksz) / SECTOR_SIZE;
+	get_fs()->dev_desc = rbdd;
 }
 
 int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf)
diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c
index 323875f..f12b805 100644
--- a/fs/ext4/ext4_common.c
+++ b/fs/ext4/ext4_common.c
@@ -378,7 +378,6 @@ void ext4fs_update_parent_dentry(char *filename, int *p_ino, int file_type)
 	struct ext_filesystem *fs = get_fs();
 	/* directory entry */
 	struct ext2_dirent *dir;
-	char *ptr = NULL;
 	char *temp_dir = NULL;
 
 	zero_buffer = zalloc(fs->blksz);
@@ -415,7 +414,6 @@ restart:
 	if (ext4fs_log_journal(root_first_block_buffer, first_block_no_of_root))
 		goto fail;
 	dir = (struct ext2_dirent *)root_first_block_buffer;
-	ptr = (char *)dir;
 	totalbytes = 0;
 	while (dir->direntlen > 0) {
 		/*
@@ -483,14 +481,12 @@ restart:
 			break;
 
 		dir = (struct ext2_dirent *)((char *)dir + templength);
-		ptr = (char *)dir;
 	}
 
 	/* make a pointer ready for creating next directory entry */
 	templength = dir->direntlen;
 	totalbytes = totalbytes + templength;
 	dir = (struct ext2_dirent *)((char *)dir + templength);
-	ptr = (char *)dir;
 
 	/* get the next available inode number */
 	inodeno = ext4fs_get_new_inode_no();
@@ -1200,6 +1196,11 @@ static void alloc_double_indirect_block(struct ext2_inode *file_inode,
 		status = ext4fs_devread(di_blockno_parent *
 					fs->sect_perblk, 0,
 					fs->blksz, (char *)di_parent_buffer);
+
+		if (!status) {
+			printf("%s: Device read error!\n", __func__);
+			goto fail;
+		}
 		memset(di_parent_buffer, '\0', fs->blksz);
 
 		/*
@@ -1227,6 +1228,11 @@ static void alloc_double_indirect_block(struct ext2_inode *file_inode,
 						fs->sect_perblk, 0,
 						fs->blksz,
 						(char *)di_child_buff);
+
+			if (!status) {
+				printf("%s: Device read error!\n", __func__);
+				goto fail;
+			}
 			memset(di_child_buff, '\0', fs->blksz);
 			/* filling of actual datablocks for each child */
 			for (j = 0; j < (fs->blksz / sizeof(int)); j++) {
diff --git a/fs/ext4/ext4_journal.c b/fs/ext4/ext4_journal.c
index 8a252d6..9f01708 100644
--- a/fs/ext4/ext4_journal.c
+++ b/fs/ext4/ext4_journal.c
@@ -410,7 +410,7 @@ int ext4fs_check_journal_state(int recovery_flag)
 	int transaction_state = TRANSACTION_COMPLETE;
 	int prev_desc_logical_no = 0;
 	int curr_desc_logical_no = 0;
-	int ofs, flags, block;
+	int ofs, flags;
 	struct ext2_inode inode_journal;
 	struct journal_superblock_t *jsb = NULL;
 	struct journal_header_t *jdb = NULL;
@@ -453,7 +453,6 @@ int ext4fs_check_journal_state(int recovery_flag)
 
 	i = be32_to_cpu(jsb->s_first);
 	while (1) {
-		block = be32_to_cpu(jsb->s_first);
 		blknr = read_allocated_block(&inode_journal, i);
 		memset(temp_buff1, '\0', fs->blksz);
 		ext4fs_devread(blknr * fs->sect_perblk,
diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c
index 06536ba..f02c215 100644
--- a/fs/ext4/ext4fs.c
+++ b/fs/ext4/ext4fs.c
@@ -40,6 +40,7 @@
 #include <linux/stat.h>
 #include <linux/time.h>
 #include <asm/byteorder.h>
+#include <div64.h>
 #include "ext4_common.h"
 
 int ext4fs_symlinknest;
@@ -930,7 +931,6 @@ static int ext4fs_write_file(struct ext2_inode *file_inode,
 	int previous_block_number = -1;
 	int delayed_start = 0;
 	int delayed_extent = 0;
-	int delayed_skipfirst = 0;
 	int delayed_next = 0;
 	char *delayed_buf = NULL;
 
@@ -963,7 +963,6 @@ static int ext4fs_write_file(struct ext2_inode *file_inode,
 					previous_block_number = blknr;
 					delayed_start = blknr;
 					delayed_extent = blockend;
-					delayed_skipfirst = skipfirst;
 					delayed_buf = buf;
 					delayed_next = blknr +
 					    (blockend >> SECTOR_BITS);
@@ -972,7 +971,6 @@ static int ext4fs_write_file(struct ext2_inode *file_inode,
 				previous_block_number = blknr;
 				delayed_start = blknr;
 				delayed_extent = blockend;
-				delayed_skipfirst = skipfirst;
 				delayed_buf = buf;
 				delayed_next = blknr +
 				    (blockend >> SECTOR_BITS);
@@ -1013,8 +1011,6 @@ int ext4fs_write(const char *fname, unsigned char *buffer,
 	unsigned int blks_reqd_for_file;
 	unsigned int blocks_remaining;
 	int existing_file_inodeno;
-	char filename[256];
-
 	char *temp_ptr = NULL;
 	long int itable_blkno;
 	long int parent_itable_blkno;
@@ -1023,6 +1019,9 @@ int ext4fs_write(const char *fname, unsigned char *buffer,
 	unsigned int inodes_per_block;
 	unsigned int ibmap_idx;
 	struct ext_filesystem *fs = get_fs();
+	ALLOC_CACHE_ALIGN_BUFFER(char, filename, 256);
+	memset(filename, 0x00, sizeof(filename));
+
 	g_parent_inode = zalloc(sizeof(struct ext2_inode));
 	if (!g_parent_inode)
 		goto fail;
@@ -1051,8 +1050,8 @@ int ext4fs_write(const char *fname, unsigned char *buffer,
 	}
 	/* calucalate how many blocks required */
 	bytes_reqd_for_file = sizebytes;
-	blks_reqd_for_file = bytes_reqd_for_file / fs->blksz;
-	if (bytes_reqd_for_file % fs->blksz != 0) {
+	blks_reqd_for_file = lldiv(bytes_reqd_for_file, fs->blksz);
+	if (do_div(bytes_reqd_for_file, fs->blksz) != 0) {
 		blks_reqd_for_file++;
 		debug("total bytes for a file %u\n", blks_reqd_for_file);
 	}
diff --git a/fs/fs.c b/fs/fs.c
index ff360af..023e7ef 100644
--- a/fs/fs.c
+++ b/fs/fs.c
@@ -257,6 +257,7 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
 	unsigned long pos;
 	int len_read;
 	char buf[12];
+	unsigned long time;
 
 	if (argc < 2)
 		return CMD_RET_USAGE;
@@ -293,11 +294,19 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
 	else
 		pos = 0;
 
+	time = get_timer(0);
 	len_read = fs_read(filename, addr, pos, bytes);
+	time = get_timer(time);
 	if (len_read <= 0)
 		return 1;
 
-	printf("%d bytes read\n", len_read);
+	printf("%d bytes read in %lu ms", len_read, time);
+	if (time > 0) {
+		puts(" (");
+		print_size(len_read / time * 1000, "/s");
+		puts(")");
+	}
+	puts("\n");
 
 	sprintf(buf, "0x%x", len_read);
 	setenv("filesize", buf);
diff --git a/fs/zfs/zfs.c b/fs/zfs/zfs.c
index 2db45b1..1b73244 100644
--- a/fs/zfs/zfs.c
+++ b/fs/zfs/zfs.c
@@ -30,6 +30,7 @@
 #include <linux/ctype.h>
 #include <asm/byteorder.h>
 #include "zfs_common.h"
+#include "div64.h"
 
 block_dev_desc_t *zfs_dev_desc;
 
@@ -2115,7 +2116,8 @@ zfs_read(zfs_file_t file, char *buf, uint64_t len)
 		/*
 		 * Find requested blkid and the offset within that block.
 		 */
-		uint64_t blkid = (file->offset + red) /	 blksz;
+		uint64_t blkid = file->offset + red;
+		blkid = do_div(blkid, blksz);
 		free(data->file_buf);
 		data->file_buf = 0;
 
diff --git a/include/atmel_hlcdc.h b/include/atmel_hlcdc.h
index 945b30a..fbd2f92 100644
--- a/include/atmel_hlcdc.h
+++ b/include/atmel_hlcdc.h
@@ -217,6 +217,13 @@ struct atmel_hlcd_regs {
 #define LCDC_BASECFG3_RDEF(value) \
 	((LCDC_BASECFG3_RDEF_Msk & ((value) << LCDC_BASECFG3_RDEF_Pos)))
 
+#define LCDC_BASECLUT_BCLUT_Pos 0
+#define LCDC_BASECLUT_BCLUT_Msk (0xff << LCDC_BASECLUT_BCLUT_Pos)
+#define LCDC_BASECLUT_GCLUT_Pos 8
+#define LCDC_BASECLUT_GCLUT_Msk (0xff << LCDC_BASECLUT_GCLUT_Pos)
+#define LCDC_BASECLUT_RCLUT_Pos 16
+#define LCDC_BASECLUT_RCLUT_Msk (0xff << LCDC_BASECLUT_RCLUT_Pos)
+
 #define LCDC_BASECFG4_DMA	(0x1 << 8)
 #define LCDC_BASECFG4_REP	(0x1 << 9)
 
diff --git a/include/bouncebuf.h b/include/bouncebuf.h
index 31021c5..707b588 100644
--- a/include/bouncebuf.h
+++ b/include/bouncebuf.h
@@ -25,6 +25,8 @@
 #ifndef __INCLUDE_BOUNCEBUF_H__
 #define __INCLUDE_BOUNCEBUF_H__
 
+#include <linux/types.h>
+
 /*
  * GEN_BB_READ -- Data are read from the buffer eg. by DMA hardware.
  * The source buffer is copied into the bounce buffer (if unaligned, otherwise
@@ -51,37 +53,36 @@
  */
 #define GEN_BB_RW	(GEN_BB_READ | GEN_BB_WRITE)
 
-#ifdef CONFIG_BOUNCE_BUFFER
+struct bounce_buffer {
+	/* Copy of data parameter passed to start() */
+	void *user_buffer;
+	/*
+	 * DMA-aligned buffer. This field is always set to the value that
+	 * should be used for DMA; either equal to .user_buffer, or to a
+	 * freshly allocated aligned buffer.
+	 */
+	void *bounce_buffer;
+	/* Copy of len parameter passed to start() */
+	size_t len;
+	/* DMA-aligned buffer length */
+	size_t len_aligned;
+	/* Copy of flags parameter passed to start() */
+	unsigned int flags;
+};
+
 /**
  * bounce_buffer_start() -- Start the bounce buffer session
+ * state:	stores state passed between bounce_buffer_{start,stop}
  * data:	pointer to buffer to be aligned
  * len:		length of the buffer
- * backup:	pointer to backup buffer (the original value is stored here if
- *              needed
  * flags:	flags describing the transaction, see above.
  */
-int bounce_buffer_start(void **data, size_t len, void **backup, uint8_t flags);
+int bounce_buffer_start(struct bounce_buffer *state, void *data,
+			size_t len, unsigned int flags);
 /**
  * bounce_buffer_stop() -- Finish the bounce buffer session
- * data:	pointer to buffer that was aligned
- * len:		length of the buffer
- * backup:	pointer to backup buffer (the original value is stored here if
- *              needed
- * flags:	flags describing the transaction, see above.
+ * state:	stores state passed between bounce_buffer_{start,stop}
  */
-int bounce_buffer_stop(void **data, size_t len, void **backup, uint8_t flags);
-#else
-static inline int bounce_buffer_start(void **data, size_t len, void **backup,
-					uint8_t flags)
-{
-	return 0;
-}
-
-static inline int bounce_buffer_stop(void **data, size_t len, void **backup,
-					uint8_t flags)
-{
-	return 0;
-}
-#endif
+int bounce_buffer_stop(struct bounce_buffer *state);
 
 #endif
diff --git a/include/cbfs.h b/include/cbfs.h
index 6ea3f35..5bb12c3 100644
--- a/include/cbfs.h
+++ b/include/cbfs.h
@@ -1,9 +1,6 @@
 /*
  * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
@@ -77,46 +74,47 @@ struct cbfs_cachenode {
 
 extern enum cbfs_result file_cbfs_result;
 
-/*
- * Return a string describing the most recent error condition.
+/**
+ * file_cbfs_error() - Return a string describing the most recent error
+ * condition.
  *
  * @return A pointer to the constant string.
  */
 const char *file_cbfs_error(void);
 
-/*
- * Initialize the CBFS driver and load metadata into RAM.
+/**
+ * file_cbfs_init() - Initialize the CBFS driver and load metadata into RAM.
  *
- * @param end_of_rom	Points to the end of the ROM the CBFS should be read
+ * @end_of_rom: Points to the end of the ROM the CBFS should be read
  *                      from.
  */
 void file_cbfs_init(uintptr_t end_of_rom);
 
-/*
- * Get the header structure for the current CBFS.
+/**
+ * file_cbfs_get_header() - Get the header structure for the current CBFS.
  *
  * @return A pointer to the constant structure, or NULL if there is none.
  */
 const struct cbfs_header *file_cbfs_get_header(void);
 
-/*
- * Get a handle for the first file in CBFS.
+/**
+ * file_cbfs_get_first() - Get a handle for the first file in CBFS.
  *
  * @return A handle for the first file in CBFS, NULL on error.
  */
 const struct cbfs_cachenode *file_cbfs_get_first(void);
 
-/*
- * Get a handle to the file after this one in CBFS.
+/**
+ * file_cbfs_get_next() - Get a handle to the file after this one in CBFS.
  *
- * @param file		A pointer to the handle to advance.
+ * @file:		A pointer to the handle to advance.
  */
 void file_cbfs_get_next(const struct cbfs_cachenode **file);
 
-/*
- * Find a file with a particular name in CBFS.
+/**
+ * file_cbfs_find() - Find a file with a particular name in CBFS.
  *
- * @param name		The name to search for.
+ * @name:		The name to search for.
  *
  * @return A handle to the file, or NULL on error.
  */
@@ -127,53 +125,55 @@ const struct cbfs_cachenode *file_cbfs_find(const char *name);
 /* All of the functions below can be used without first initializing CBFS. */
 /***************************************************************************/
 
-/*
- * Find a file with a particular name in CBFS without using the heap.
+/**
+ * file_cbfs_find_uncached() - Find a file with a particular name in CBFS
+ * without using the heap.
  *
- * @param end_of_rom	Points to the end of the ROM the CBFS should be read
+ * @end_of_rom:		Points to the end of the ROM the CBFS should be read
  *                      from.
- * @param name		The name to search for.
+ * @name:		The name to search for.
  *
  * @return A handle to the file, or NULL on error.
  */
 const struct cbfs_cachenode *file_cbfs_find_uncached(uintptr_t end_of_rom,
 						     const char *name);
 
-/*
- * Get the name of a file in CBFS.
+/**
+ * file_cbfs_name() - Get the name of a file in CBFS.
  *
- * @param file		The handle to the file.
+ * @file:		The handle to the file.
  *
  * @return The name of the file, NULL on error.
  */
 const char *file_cbfs_name(const struct cbfs_cachenode *file);
 
-/*
- * Get the size of a file in CBFS.
+/**
+ * file_cbfs_size() - Get the size of a file in CBFS.
  *
- * @param file		The handle to the file.
+ * @file:		The handle to the file.
  *
  * @return The size of the file, zero on error.
  */
 u32 file_cbfs_size(const struct cbfs_cachenode *file);
 
-/*
- * Get the type of a file in CBFS.
+/**
+ * file_cbfs_type() - Get the type of a file in CBFS.
  *
- * @param file		The handle to the file.
+ * @file:		The handle to the file.
  *
  * @return The type of the file, zero on error.
  */
 u32 file_cbfs_type(const struct cbfs_cachenode *file);
 
-/*
- * Read a file from CBFS into RAM
+/**
+ * file_cbfs_read() - Read a file from CBFS into RAM
  *
- * @param file		A handle to the file to read.
- * @param buffer	Where to read it into memory.
+ * @file:		A handle to the file to read.
+ * @buffer:		Where to read it into memory.
+ * @maxsize:		Maximum number of bytes to read
  *
  * @return If positive or zero, the number of characters read. If negative, an
- *         error occurred.
+ *	   error occurred.
  */
 long file_cbfs_read(const struct cbfs_cachenode *file, void *buffer,
 		    unsigned long maxsize);
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index 9ecdad9..e3e5ebc 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -174,7 +174,7 @@
 #define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 #define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
 #define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2PCI (bd->bi_memsize) /* host use this pci address */
 
 #define CONFIG_PCI_4xx_PTM_OVERWRITE	1 /* overwrite PTMx settings by env */
 
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index efab119..c4fff48 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -195,7 +195,7 @@
 #define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 #define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
 #define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2PCI (bd->bi_memsize) /* host use this pci address */
 
 #define CONFIG_PCI_4xx_PTM_OVERWRITE	1 /* overwrite PTMx settings by env */
 
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 83e9a04..9122cbd 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -192,7 +192,7 @@
 #define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
 #define CONFIG_SYS_PCI_PTM2LA	0xffc00000	/* point to flash		*/
 #define CONFIG_SYS_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
-#define CONFIG_SYS_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#define CONFIG_SYS_PCI_PTM2PCI (bd->bi_memsize) /* host use this pci address */
 
 #define CONFIG_PCI_4xx_PTM_OVERWRITE	1 /* overwrite PTMx settings by env */
 
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 1944a07..f778af7 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -196,7 +196,7 @@
 #define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 #define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
 #define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
+#define CONFIG_SYS_PCI_PTM2PCI (bd->bi_memsize) /* host use this pci address */
 
 #define CONFIG_PCI_4xx_PTM_OVERWRITE	1 /* overwrite PTMx settings by env */
 
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 57aef21..437ee6e 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -553,6 +553,7 @@ extern unsigned long get_sdram_size(void);
 
 /* SATA */
 #define CONFIG_FSL_SATA
+#define CONFIG_FSL_SATA_V2
 #define CONFIG_LIBATA
 
 #ifdef CONFIG_FSL_SATA
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index b3c850d..14d597a 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -360,6 +360,7 @@
 /* SATA */
 #define CONFIG_LIBATA
 #define CONFIG_FSL_SATA
+#define CONFIG_FSL_SATA_V2
 
 #define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 800d666..878bd5f 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -524,7 +524,7 @@ extern unsigned long get_clock_freq(void);
 /* Default address of microcode for the Linux Fman driver */
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEF000000
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEFF40000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	0x1f00000
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 5cdb628..8b9b0db 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -202,15 +202,21 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 /* Set the local bus clock 1/8 of platform clock */
 #define CONFIG_SYS_LBC_LCRR		LCRR_CLKDIV_8
 
-#define CONFIG_SYS_FLASH_BASE		0xe8000000	/* Start of PromJet */
+/*
+ * This board doesn't have a promjet connector.
+ * However, it uses commone corenet board LAW and TLB.
+ * It is necessary to use the same start address with proper offset.
+ */
+#define CONFIG_SYS_FLASH_BASE		0xe0000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_FLASH_BASE_PHYS	0xfe8000000ull
+#define CONFIG_SYS_FLASH_BASE_PHYS	0xfe0000000ull
 #else
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
 #endif
 
 #define CONFIG_SYS_FLASH_BR_PRELIM \
-		(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
+		(BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
+		BR_PS_16 | BR_V)
 #define CONFIG_SYS_FLASH_OR_PRELIM \
 		((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 		 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
@@ -294,7 +300,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
@@ -539,7 +545,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEF000000
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEFF40000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
@@ -560,8 +566,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #endif	/* CONFIG_PCI */
 
 /* SATA */
+#define CONFIG_FSL_SATA_V2
+
+#ifdef CONFIG_FSL_SATA_V2
 #define CONFIG_FSL_SATA
-#ifdef CONFIG_FSL_SATA
 #define CONFIG_LIBATA
 
 #define CONFIG_SYS_SATA_MAX_DEVICE	2
diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h
index cf184e7..ce8f9b0 100644
--- a/include/configs/P3041DS.h
+++ b/include/configs/P3041DS.h
@@ -32,6 +32,7 @@
 
 #define CONFIG_MMC
 #define CONFIG_NAND_FSL_ELBC
+#define CONFIG_FSL_SATA_V2
 #define CONFIG_PCIE3
 #define CONFIG_PCIE4
 #define CONFIG_SYS_DPAA_RMAN
diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h
index 7018d7a..778230d 100644
--- a/include/configs/P5020DS.h
+++ b/include/configs/P5020DS.h
@@ -32,6 +32,7 @@
 
 #define CONFIG_MMC
 #define CONFIG_NAND_FSL_ELBC
+#define CONFIG_FSL_SATA_V2
 #define CONFIG_PCIE3
 #define CONFIG_PCIE4
 #define CONFIG_SYS_FSL_RAID_ENGINE
diff --git a/include/configs/P5040DS.h b/include/configs/P5040DS.h
new file mode 100644
index 0000000..50d9e541
--- /dev/null
+++ b/include/configs/P5040DS.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * P5040 DS board configuration file
+ *
+ */
+#define CONFIG_P5040DS
+#define CONFIG_PHYS_64BIT
+#define CONFIG_PPC_P5040
+
+#define CONFIG_FSL_NGPIXIS		/* use common ngPIXIS code */
+
+#define CONFIG_MMC
+#define CONFIG_NAND_FSL_ELBC
+#define CONFIG_PCIE3
+#define CONFIG_SYS_FSL_RAID_ENGINE
+
+#define CONFIG_ICS307_REFCLK_HZ		25000000  /* ICS307 ref clk freq */
+
+#include "corenet_ds.h"
diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
index 403fafa..aced85b 100644
--- a/include/configs/PK1C20.h
+++ b/include/configs/PK1C20.h
@@ -142,6 +142,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
 #define CONFIG_STATUS_LED			/* Enable status driver */
+#define CONFIG_BOARD_SPECIFIC_LED
 
 #define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
 #define STATUS_LED_STATE	1		/* Blinking		*/
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
new file mode 100644
index 0000000..df3b4ae
--- /dev/null
+++ b/include/configs/a3m071.h
@@ -0,0 +1,380 @@
+/*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5200
+#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
+#define CONFIG_A3M071			/* ... on A3M071 board */
+#define CONFIG_MPC5200_DDR		/* ... use DDR RAM	*/
+
+#define	CONFIG_SYS_TEXT_BASE	0x01000000	/* boot low for 32 MiB boards */
+
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33MHz */
+
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SYS_LOWBOOT		/* Enable lowboot	*/
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	    /* console is on PSC1 */
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
+#define CONFIG_SYS_BAUDRATE_TABLE		\
+	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_REGINFO
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+/* define for 66MHz speed - undef for 33MHz PCI clock speed */
+#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,5200@0"
+#define OF_SOC			"soc5200@f0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C				/* I2C with hardware support */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x53
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_PCF8563
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51
+
+/*
+ * NOR flash configuration
+ */
+#define CONFIG_SYS_FLASH_BASE		0xfc000000
+#define CONFIG_SYS_FLASH_SIZE		0x01000000
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x40000)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+#define CONFIG_SYS_FLASH_ERASE_TOUT	240000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500
+#define CONFIG_SYS_FLASH_LOCK_TOUT	5
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * Memory map
+ */
+#define CONFIG_SYS_MBAR			0xf0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR		0x80000000
+
+/* Use SRAM until RAM will be available */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END		MPC5XXX_SRAM_SIZE
+
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
+					 CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(1 << 20)
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC
+#define CONFIG_MPC5xxx_FEC_MII100
+#define CONFIG_PHY_ADDR			0x00
+
+/*
+ * GPIO configuration
+ */
+
+/*
+ * GPIO-config depends on failsave-level
+ * failsave 0 means just MPX-config, no digiboard, no fpga
+ *          1 means digiboard ok
+ *          2 means fpga ok
+ */
+
+/* for failsave-level 0 - full failsave */
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x1005C005
+/* for failsave-level 1 - only digiboard ok */
+#define CONFIG_SYS_GPS_PORT_CONFIG_1	0x1005C005
+/* for failsave-level 2 - all ok */
+#define CONFIG_SYS_GPS_PORT_CONFIG_2	0x1005C005
+
+/*
+ * Configuration matrix
+ *                        MSB                          LSB
+ * failsave 0  0x1005C005  00010000000001011100000001100101  ( full failsave )
+ * failsave 1  0x1005C005  00010000000001011100000001100101  ( digib.-ver ok )
+ * failsave 2  0x1005C005  00010000000001011100000001100101  ( all ok )
+ *                         || ||| ||  |   ||| |   |   |   |
+ *                         || ||| ||  |   ||| |   |   |   |  bit rev name
+ *                         ++-+++-++--+---+++-+---+---+---+-  0   31 CS1
+ *                          +-+++-++--+---+++-+---+---+---+-  1   30 LPTZ
+ *                            ||| ||  |   ||| |   |   |   |   2   29 ALTs
+ *                            +++-++--+---+++-+---+---+---+-  3   28 ALTs
+ *                             ++-++--+---+++-+---+---+---+-  4   27 CS7
+ *                              +-++--+---+++-+---+---+---+-  5   26 CS6
+ *                                ||  |   ||| |   |   |   |   6   25 ATA
+ *                                ++--+---+++-+---+---+---+-  7   24 ATA
+ *                                 +--+---+++-+---+---+---+-  8   23 IR_USB_CLK
+ *                                    |   ||| |   |   |   |   9   22 IRDA
+ *                                    |   ||| |   |   |   |  10   21 IRDA
+ *                                    +---+++-+---+---+---+- 11   20 IRDA
+ *                                        ||| |   |   |   |  12   19 Ether
+ *                                        ||| |   |   |   |  13   18 Ether
+ *                                        ||| |   |   |   |  14   17 Ether
+ *                                        +++-+---+---+---+- 15   16 Ether
+ *                                         ++-+---+---+---+- 16   15 PCI_DIS
+ *                                          +-+---+---+---+- 17   14 USB_SE
+ *                                            |   |   |   |  18   13 USB
+ *                                            +---+---+---+- 19   12 USB
+ *                                                |   |   |  20   11 PSC3
+ *                                                |   |   |  21   10 PSC3
+ *                                                |   |   |  22    9 PSC3
+ *                                                +---+---+- 23    8 PSC3
+ *                                                    |   |  24    7 -
+ *                                                    |   |  25    6 PSC2
+ *                                                    |   |  26    5 PSC2
+ *                                                    +---+- 27    4 PSC2
+ *                                                        |  28    3 -
+ *                                                        |  29    2 PSC1
+ *                                                        |  30    1 PSC1
+ *                                                        +- 31    0 PSC1
+ */
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"=> "
+
+#define CONFIG_CMDLINE_EDITING
+#define	CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE		1024
+#else
+#define CONFIG_SYS_CBSIZE		256
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START	0x00100000
+#define CONFIG_SYS_MEMTEST_END		0x00f00000
+
+#define CONFIG_SYS_LOAD_ADDR		0x00100000
+
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_LOOPW
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/
+
+/*
+ * Various low-level settings
+ */
+#define CONFIG_SYS_HID0_INIT		(HID0_ICE | HID0_ICFI)
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
+
+#define CONFIG_SYS_BOOTCS_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS2_START		0xe0000000
+#define CONFIG_SYS_CS2_SIZE		0x00100000
+
+/* FPGA slave io (512kiB) - see ticket #66 */
+#define CONFIG_SYS_CS3_START		0xE9000000
+#define CONFIG_SYS_CS3_SIZE		0x00080000
+/* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0032B900 */
+#define CONFIG_SYS_CS3_CFG		0x0032B900
+
+/* Diagnosis Interface - see ticket #63 */
+#define CONFIG_SYS_CS4_START		0xEA000000
+#define CONFIG_SYS_CS4_SIZE		0x00000001
+/* 00000000 00000010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0002B900 */
+#define CONFIG_SYS_CS4_CFG		0x0002B900
+
+/* FPGA master io (64kiB) - see ticket #66 */
+#define CONFIG_SYS_CS5_START		0xE8000000
+#define CONFIG_SYS_CS5_SIZE		0x00010000
+/* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0032B900 */
+#define CONFIG_SYS_CS5_CFG		0x0032B900
+
+#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* for pci_clk  = 66 MHz */
+#define CONFIG_SYS_BOOTCS_CFG		0x0006F900
+#define CONFIG_SYS_CS1_CFG		0x0004FB00
+#define CONFIG_SYS_CS2_CFG		0x0006F90C
+#else	/* for pci_clk = 33 MHz */
+#define CONFIG_SYS_BOOTCS_CFG		0x0002F900
+#define CONFIG_SYS_CS1_CFG		0x0001FB00
+#define CONFIG_SYS_CS2_CFG		0x0002F90C
+#endif
+
+#define CONFIG_SYS_CS_BURST		0x00000000
+/* set DC for FPGA CS5 and CS3 to 0 - see ticket #66 */
+/* R  7  R  6  R  5  R  4  R  3  R  2  R  1  R  0  */
+/* 00 11 00 11 00 00 00 11 00 00 00 00 00 00 00 00 */
+#define CONFIG_SYS_CS_DEADCYCLE		0x33030000
+
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_BOOTDELAY	0	/* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_mtd\" to boot from flash with mtd filesystem;" \
+	"echo Type \"run net_nfs\" to boot from tftp with nfs filesystem;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_SYS_OS_BASE	0xfc080000
+#define CONFIG_SYS_FDT_BASE	0xfc060000
+
+#define xstr(s)	str(s)
+#define str(s)	#s
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"verify=no\0"							\
+	"consoledev=ttyPSC0\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"mtdargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2\0"\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} "				\
+		"console=${consoledev},${baudrate}\0"			\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr} - ${fdtaddr}\0"			\
+	"flash_mtd=run mtdargs addip addtty;"				\
+		"bootm ${kernel_addr} - ${fdtaddr}\0"			\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0"	\
+	"net_nfs=sleep 2; tftp ${loadaddr} ${bootfile};"		\
+		"tftp c00000 ${fdtfile};"				\
+		"run nfsargs addip addtty;"				\
+		"bootm ${loadaddr} - c00000\0"				\
+	"load=tftp ${loadaddr} u-boot.bin\0"				\
+	"update=protect off fc000000 fc03ffff; "			\
+		"era fc000000 fc03ffff; cp.b ${loadaddr} fc000000 40000\0"\
+	"upd=run load;run update\0"					\
+	"fdtaddr=" xstr(CONFIG_SYS_FDT_BASE) "\0"			\
+	"fdtfile=dtbFile\0"						\
+	"kernel_addr=" xstr(CONFIG_SYS_OS_BASE) "\0"			\
+	""
+
+#define CONFIG_BOOTCOMMAND	"run flash_mtd"
+
+/*
+ * SPL related defines
+ */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_NOR_SUPPORT
+#define CONFIG_SPL_TEXT_BASE	0xfc000000
+#define	CONFIG_SPL_START_S_PATH	"arch/powerpc/cpu/mpc5xxx"
+#define CONFIG_SPL_LDSCRIPT	"arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT	/* image.c */
+#define CONFIG_SPL_LIBGENERIC_SUPPORT	/* string.c */
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+/* Place BSS for SPL near end of SDRAM */
+#define CONFIG_SPL_BSS_START_ADDR	((128 - 1) << 20)
+#define CONFIG_SPL_BSS_MAX_SIZE		(64 << 10)
+
+#define CONFIG_SPL_OS_BOOT
+/* Place patched DT blob (fdt) at this address */
+#define CONFIG_SYS_SPL_ARGS_ADDR	0x01800000
+
+/* Settings for real U-Boot to be loaded from NOR flash */
+#ifndef __ASSEMBLY__
+extern char __spl_flash_end[];
+#endif
+#define CONFIG_SYS_UBOOT_BASE		__spl_flash_end
+#define CONFIG_SYS_SPL_MAX_LEN		(32 << 10)
+#define CONFIG_SYS_UBOOT_START		0x1000100
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index b6e48f8..ab9549b 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -257,6 +257,33 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
+/*
+ * USB configuration
+ */
+#define CONFIG_USB_MUSB_DSPS
+#define CONFIG_ARCH_MISC_INIT
+#define CONFIG_MUSB_GADGET
+#define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_MUSB_HOST
+#define CONFIG_AM335X_USB0
+#define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
+#define CONFIG_AM335X_USB1
+#define CONFIG_AM335X_USB1_MODE MUSB_HOST
+
+#ifdef CONFIG_MUSB_HOST
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#endif
+
+#ifdef CONFIG_MUSB_GADGET
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_RNDIS
+#endif /* CONFIG_MUSB_GADGET */
+
+/* Unsupported features */
+#undef CONFIG_USE_IRQ
+
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 20a3df5..e1ad1e5 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -337,6 +337,9 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index ce71d13..ba15325 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -97,15 +97,16 @@
 
 /*
  * USB configuration
- * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
- * Enable CONFIG_MUSB_UDC for Device functionalities.
+ * Enable CONFIG_MUSB_HOST for Host functionalities MSC, keyboard
+ * Enable CONFIG_MUSB_GADGET for Device functionalities.
  */
-#define CONFIG_USB_AM35X		1
-#define CONFIG_MUSB_HCD			1
+#define CONFIG_USB_MUSB_AM35X
+#define CONFIG_MUSB_HOST
+#define CONFIG_MUSB_PIO_ONLY
 
-#ifdef CONFIG_USB_AM35X
+#ifdef CONFIG_USB_MUSB_AM35X
 
-#ifdef CONFIG_MUSB_HCD
+#ifdef CONFIG_MUSB_HOST
 #define CONFIG_CMD_USB
 
 #define CONFIG_USB_STORAGE
@@ -117,21 +118,15 @@
 #define CONFIG_PREBOOT "usb start"
 #endif /* CONFIG_USB_KEYBOARD */
 
-#endif /* CONFIG_MUSB_HCD */
+#endif /* CONFIG_MUSB_HOST */
 
-#ifdef CONFIG_MUSB_UDC
-/* USB device configuration */
-#define CONFIG_USB_DEVICE		1
-#define CONFIG_USB_TTY			1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID		0x0451
-#define CONFIG_USBD_PRODUCTID		0x5678
-#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME	"AM3517EVM"
-#endif /* CONFIG_MUSB_UDC */
+#ifdef CONFIG_MUSB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_RNDIS
+#endif /* CONFIG_MUSB_GADGET */
 
-#endif /* CONFIG_USB_AM35X */
+#endif /* CONFIG_USB_MUSB_AM35X */
 
 /* commands to include */
 #include <config_cmd_default.h>
@@ -336,6 +331,9 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 71f765b..1317582 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -168,8 +168,7 @@
 #define CONFIG_BOOTCOMMAND	"nand read " \
 				"0x22000000 0x200000 0x300000; " \
 				"bootm 0x22000000"
-#else
-#ifdef CONFIG_SYS_USE_SPIFLASH
+#elif defined(CONFIG_SYS_USE_SPIFLASH)
 /* bootstrap + u-boot + env + linux in spi flash */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET	0x5000
@@ -179,14 +178,28 @@
 #define CONFIG_BOOTCOMMAND	"sf probe 0; " \
 				"sf read 0x22000000 0x100000 0x300000; " \
 				"bootm 0x22000000"
-#endif
+#else /* CONFIG_SYS_USE_MMC */
+/* bootstrap + u-boot + env + linux in mmc */
+#define CONFIG_ENV_IS_IN_MMC
+/* For FAT system, most cases it should be in the reserved sector */
+#define CONFIG_ENV_OFFSET	0x2000
+#define CONFIG_ENV_SIZE		0x1000
+#define CONFIG_SYS_MMC_ENV_DEV	0
 #endif
 
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_BOOTARGS		"mem=128M console=ttyS0,115200 " \
+				"mtdparts=atmel_nand:" \
+				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
+				"root=/dev/mmcblk0p2 " \
+				"rw rootfstype=ext4 rootwait"
+#else
 #define CONFIG_BOOTARGS		"mem=128M console=ttyS0,115200 " \
 				"mtdparts=atmel_nand:" \
 				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
 				"root=/dev/mtdblock1 rw " \
 				"rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"
+#endif
 
 #define CONFIG_BAUDRATE		115200
 
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index 56dc1cb..a7a698c 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -219,6 +219,9 @@
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 #define CONFIG_SPL_SERIAL_SUPPORT
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index cc95e2b..adeace0 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -35,9 +35,13 @@
  * (easy to change)
  */
 #define CONFIG_SYS_COREBOOT
-#undef CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_SHOW_BOOT_PROGRESS
 #define CONFIG_LAST_STAGE_INIT
-
+#define CONFIG_X86_NO_RESET_VECTOR
+#define CONFIG_SYS_VSNPRINTF
+#define CONFIG_INTEL_CORE_ARCH	/* Sandy bridge and ivy bridge chipsets. */
+#define CONFIG_ZBOOT_32
+#define CONFIG_PHYSMEM
 
 /*-----------------------------------------------------------------------
  * Watchdog Configuration
@@ -67,11 +71,16 @@
 					 CONFIG_SYS_SCSI_MAX_LUN)
 #endif
 
+/* Generic TPM interfaced through LPC bus */
+#define CONFIG_GENERIC_LPC_TPM
+#define CONFIG_TPM_TIS_BASE_ADDRESS        0xfed40000
+
 /*-----------------------------------------------------------------------
  * Real Time Clock Configuration
  */
 #define CONFIG_RTC_MC146818
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS	0
+#define CONFIG_SYS_ISA_IO      CONFIG_SYS_ISA_IO_BASE_ADDRESS
 
 /*-----------------------------------------------------------------------
  * Serial Configuration
@@ -88,18 +97,18 @@
 #define CONFIG_SYS_NS16550_COM2	UART1_BASE
 #define CONFIG_SYS_NS16550_PORT_MAPPED
 
-/* max. 1 IDE bus	*/
-#define CONFIG_SYS_IDE_MAXBUS		1
-/* max. 1 drive per IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS * 1)
+#define CONFIG_STD_DEVICES_SETTINGS     "stdin=usbkbd,vga,eserial0\0" \
+					"stdout=vga,eserial0,cbmem\0" \
+					"stderr=vga,eserial0,cbmem\0"
 
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_ISA_IO_BASE_ADDRESS
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x01f0
-#define CONFIG_SYS_ATA_IDE1_OFFSET	0x0170
-#define CONFIG_SYS_ATA_DATA_OFFSET	0
-#define CONFIG_SYS_ATA_REG_OFFSET	0
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x200
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_STDIO_DEREGISTER
+#define CONFIG_CBMEM_CONSOLE
 
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_COMMAND_HISTORY
+#define CONFIG_AUTOCOMPLETE
 
 #define CONFIG_SUPPORT_VFAT
 /************************************************************
@@ -110,19 +119,30 @@
 /************************************************************
  * DISK Partition support
  ************************************************************/
+#define CONFIG_EFI_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION		/* Experimental */
 
+#define CONFIG_CMD_PART
 #define CONFIG_CMD_CBFS
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_PARTITION_UUIDS
 
 /*-----------------------------------------------------------------------
  * Video Configuration
  */
-#undef CONFIG_VIDEO
-#undef CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_COREBOOT
+#define CONFIG_VIDEO_SW_CURSOR
+#define VIDEO_FB_16BPP_WORD_SWAP
+#define CONFIG_I8042_KBD
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/* x86 GPIOs are accessed through a PCI device */
+#define CONFIG_INTEL_ICH6_GPIO
 
 /*-----------------------------------------------------------------------
  * Command line configuration.
@@ -136,6 +156,7 @@
 #define CONFIG_CMD_ECHO
 #undef CONFIG_CMD_FLASH
 #define CONFIG_CMD_FPGA
+#define CONFIG_CMD_GPIO
 #define CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
 #define CONFIG_CMD_IRQ
@@ -153,12 +174,19 @@
 #define CONFIG_CMD_SETGETDCR
 #define CONFIG_CMD_SOURCE
 #define CONFIG_CMD_XIMG
-#define CONFIG_CMD_IDE
+#define CONFIG_CMD_SCSI
+
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
 
+#define CONFIG_CMD_ZBOOT
+
 #define CONFIG_BOOTDELAY	2
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 console=ttyS0,9600"
+#define CONFIG_BOOTARGS		\
+	"root=/dev/sdb3 init=/sbin/init rootwait ro"
+#define CONFIG_BOOTCOMMAND	\
+	"ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000"
+
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE			115200
@@ -210,12 +238,11 @@
  * (128kB + Environment Sector Size) malloc pool
  */
 #define CONFIG_SYS_STACK_SIZE			(32 * 1024)
-#define CONFIG_SYS_INIT_SP_ADDR		(256 * 1024 + 16 * 1024)
+#define CONFIG_SYS_CAR_ADDR			0x19200000
+#define CONFIG_SYS_CAR_SIZE			(16 * 1024)
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN			(256 * 1024)
 #define CONFIG_SYS_MALLOC_LEN			(0x20000 + 128 * 1024)
-/* Address of temporary Global Data */
-#define CONFIG_SYS_INIT_GD_ADDR		(256 * 1024)
 
 
 /* allow to overwrite serial and ethaddr */
@@ -240,4 +267,7 @@
  */
 #define CONFIG_PCI
 
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	CONFIG_STD_DEVICES_SETTINGS
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index c41b039..3f42cd9 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -549,7 +549,7 @@
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR		0xEF000000
+#define CONFIG_SYS_QE_FMAN_FW_ADDR		0xEFF40000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index ddd6155..99b4de7 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -227,6 +227,9 @@
 #define CONFIG_SYS_NAND_ECCBYTES	10
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_LOAD
 #endif
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index da3263f..83a8b5d 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -316,6 +316,9 @@
 #define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index 4b1c219..28cf95b 100644
--- a/include/configs/eNET.h
+++ b/include/configs/eNET.h
@@ -168,16 +168,10 @@
 #define CONFIG_SYS_STACK_SIZE			(32 * 1024)
 #define CONFIG_SYS_CAR_ADDR			0x19200000
 #define CONFIG_SYS_CAR_SIZE			(16 * 1024)
-#define CONFIG_SYS_INIT_SP_ADDR			(CONFIG_SYS_CAR_ADDR + \
-						 CONFIG_SYS_CAR_SIZE)
 #define CONFIG_SYS_MONITOR_BASE			CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN			(256 * 1024)
 #define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SECT_SIZE + \
 						 128*1024)
-/* Address of temporary Global Data */
-#define CONFIG_SYS_INIT_GD_ADDR			CONFIG_SYS_CAR_ADDR
-
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index 9ecc10b..5a0d321 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -38,7 +38,7 @@
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE			115200
 
 #undef	CONFIG_MONITOR_IS_IN_RAM		/* starts uboot direct */
 
@@ -52,20 +52,24 @@
 #define CONFIG_RESET_TO_RETRY
 #define CONFIG_SPLASH_SCREEN
 
+#define CONFIG_HW_WATCHDOG
+
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_ACTIVE		0
+#define STATUS_LED_BIT			0x0008	/* Timer7 GPIO */
+#define STATUS_LED_BOOT			0
+#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
+#define STATUS_LED_STATE		STATUS_LED_OFF
+
 /*----------------------------------------------------------------------*
  * Configuration for environment					*
  * Environment is in the second sector of the first 256k of flash	*
  *----------------------------------------------------------------------*/
 
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_ENV_ADDR		0xF003C000	/* End of 256K */
-#define CONFIG_ENV_SECT_SIZE	0x4000
-#define CONFIG_ENV_IS_IN_FLASH	1
-#else
-#define CONFIG_ENV_ADDR		0xFFE04000
-#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_ADDR		0xFF040000
+#define CONFIG_ENV_SECT_SIZE	0x00020000
 #define CONFIG_ENV_IS_IN_FLASH	1
-#endif
 
 /*
  * BOOTP options
@@ -78,26 +82,24 @@
 /*
  * Command line configuration.
  */
+#define CONFIG_CMDLINE_EDITING
 #include <config_cmd_default.h>
 
 #undef CONFIG_CMD_LOADB
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_LED
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 
 #define CONFIG_MCFTMR
 
-
 #define CONFIG_BOOTDELAY	5
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT	"\nEB+CPU5282> "
 #define	CONFIG_SYS_LONGHELP	1
 
-#if defined(CONFIG_CMD_KGDB)
 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size	*/
-#endif
 #define	CONFIG_SYS_PBSIZE 	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define	CONFIG_SYS_MAXARGS	16	/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
@@ -112,12 +114,12 @@
 /*----------------------------------------------------------------------*
  * Clock and PLL Configuration						*
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ			10000000
-#define	CONFIG_SYS_CLK			58982400       /* 9,8304MHz * 6 */
+#define CONFIG_SYS_HZ			1000
+#define	CONFIG_SYS_CLK			80000000      /* 8MHz * 8 */
 
-/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
+/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
 
-#define CONFIG_SYS_MFD		0x01	/* PLL Multiplication Factor Devider */
+#define CONFIG_SYS_MFD		0x02	/* PLL Multiplication Factor Devider */
 #define CONFIG_SYS_RFD		0x00	/* PLL Reduce Frecuency Devider */
 
 /*----------------------------------------------------------------------*
@@ -135,7 +137,6 @@
 #define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #define MCFFEC_TOUT_LOOP		50000
 
-#define CONFIG_ETHADDR			00:CF:52:82:EB:01
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
 
 /*-------------------------------------------------------------------------
@@ -151,7 +152,7 @@
  *-----------------------------------------------------------------------*/
 
 #define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
-#define CONFIG_SYS_INIT_RAM_SIZE		0x10000
+#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
 #define CONFIG_SYS_GBL_DATA_OFFSET	\
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
@@ -161,12 +162,11 @@
  * (Set up by the startup code)
  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CONFIG_SYS_SDRAM_BASE1		0x00000000
-#define	CONFIG_SYS_SDRAM_SIZE1		16	/* SDRAM size in MB */
-
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_SDRAM_BASE1
-#define	CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_SDRAM_SIZE1
+#define CONFIG_SYS_SDRAM_BASE0		0x00000000
+#define	CONFIG_SYS_SDRAM_SIZE0		16	/* SDRAM size in MB */
 
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_SDRAM_BASE0
+#define	CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_SDRAM_SIZE0
 
 /* If M5282 port is fully implemented the monitor base will be behind
  * the vector table. */
@@ -190,16 +190,24 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
+#define CONFIG_FLASH_SHOW_PROGRESS	45
 
 #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 #define	CONFIG_SYS_INT_FLASH_BASE	0xF0000000
 #define CONFIG_SYS_INT_FLASH_ENABLE	0x21
 
-#define	CONFIG_SYS_MAX_FLASH_SECT	35
-#define	CONFIG_SYS_MAX_FLASH_BANKS	2
+#define	CONFIG_SYS_MAX_FLASH_SECT	128
+#define	CONFIG_SYS_MAX_FLASH_BANKS	1
 #define	CONFIG_SYS_FLASH_ERASE_TOUT	10000000
 #define	CONFIG_SYS_FLASH_PROTECTION
 
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_SIZE		16*1024*1024
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
@@ -221,12 +229,16 @@
  * Memory bank definitions
  */
 
-#define CONFIG_SYS_CS0_BASE		0xFFE00000
+#define CONFIG_SYS_CS0_BASE		0xFF000000
 #define CONFIG_SYS_CS0_CTRL		0x00001980
-#define CONFIG_SYS_CS0_MASK		0x001F0001
+#define CONFIG_SYS_CS0_MASK		0x00FF0001
 
-#define CONFIG_SYS_CS3_BASE		0xE0000000
-#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS2_BASE		0xE0000000
+#define CONFIG_SYS_CS2_CTRL		0x00001980
+#define CONFIG_SYS_CS2_MASK		0x000F0001
+
+#define CONFIG_SYS_CS3_BASE		0xE0100000
+#define CONFIG_SYS_CS3_CTRL		0x00001980
 #define CONFIG_SYS_CS3_MASK		0x000F0001
 
 /*-----------------------------------------------------------------------
@@ -248,24 +260,42 @@
 #define CONFIG_SYS_PCDDR		0x0000000
 #define CONFIG_SYS_PCDAT		0x0000000
 
+#define CONFIG_SYS_PASPAR		0x0F0F
 #define CONFIG_SYS_PEHLPAR		0xC0
 #define CONFIG_SYS_PUAPAR		0x0F
 #define CONFIG_SYS_DDRUA		0x05
 #define CONFIG_SYS_PJPAR		0xFF
 
 /*-----------------------------------------------------------------------
+ * I2C
+ */
+
+#define CONFIG_HARD_I2C
+#define CONFIG_FSL_I2C
+
+#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
+
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		0
+
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_DS1338
+#define CONFIG_I2C_RTC_ADDR		0x68
+#endif
+
+/*-----------------------------------------------------------------------
  * VIDEO configuration
  */
 
 #define CONFIG_VIDEO
 
 #ifdef CONFIG_VIDEO
-#define	CONFIG_VIDEO_VCXK			1
+#define CONFIG_VIDEO_VCXK			1
 
 #define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN	2
 #define	CONFIG_SYS_VCXK_DOUBLEBUFFERED		1
-#define CONFIG_SYS_VCXK_BASE			CONFIG_SYS_CS3_BASE
-#define CONFIG_SYS_VCXK_AUTODETECT		1
+#define CONFIG_SYS_VCXK_BASE			CONFIG_SYS_CS2_BASE
 
 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT	MCFGPTB_GPTPORT
 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR		MCFGPTB_GPTDDR
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index c0e3ed3..8d27590 100644
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -63,6 +63,9 @@
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_LIBGENERIC_SUPPORT	/* for udelay and __div64_32 for NAND */
 #define CONFIG_SPL_SERIAL_SUPPORT
diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
index 85856f2..f646ae5 100644
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 2011-2012
  * Gerald Kerma <dreagle@doukki.net>
- * Luka Perkov <uboot@lukaperkov.net>
+ * Luka Perkov <luka@openwrt.org>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h
index 2b523c9..ba57849 100644
--- a/include/configs/iconnect.h
+++ b/include/configs/iconnect.h
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2009-2012
  * Wojciech Dubowik <wojciech.dubowik@neratec.com>
- * Luka Perkov <uboot@lukaperkov.net>
+ * Luka Perkov <luka@openwrt.org>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index c81ab76..be7937d 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -338,6 +338,9 @@
 
 #ifdef CONFIG_BOOT_NAND
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 6ae764a..8fc3942 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -72,9 +72,9 @@
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
 /* PMIC Controller */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_SPI
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	1000000
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 2d33ebc..2ebcd16 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -401,7 +401,6 @@
 #define CONFIG_USB_EHCI			/* Enable EHCI USB support	*/
 #define CONFIG_USB_EHCI_PPC4XX		/* on PPC4xx platform		*/
 #define CONFIG_SYS_PPC4XX_USB_ADDR	0xe0000300
-#define CONFIG_EHCI_DCACHE		/* with dcache handling support	*/
 #define CONFIG_EHCI_MMIO_BIG_ENDIAN
 #define CONFIG_EHCI_DESC_BIG_ENDIAN
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index bf49cc1..e304c99 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -114,7 +114,6 @@
 #define CONFIG_USB_EHCI_OMAP
 #define CONFIG_USB_ULPI
 #define CONFIG_USB_ULPI_VIEWPORT_OMAP
-/*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	57
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 
@@ -379,6 +378,9 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 9d9f4a7..9e4006b4 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -68,9 +68,9 @@
 #define CONFIG_MXC_GPIO
 
 /* PMIC Controller */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_SPI
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	1000000
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 6572676..138a941 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -69,9 +69,9 @@
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
 /* PMIC Controller */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_SPI
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	2
 #define CONFIG_FSL_PMIC_CLK	1000000
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 1c2f599..88b2bd6 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -65,9 +65,9 @@
 /*
  * PMIC Configs
  */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_FSL
 #define CONFIG_PMIC_FSL_MC13892
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x08
 #define CONFIG_RTC_MC13XXX
diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h
index a056566..a74a0a7 100644
--- a/include/configs/mx51_efikamx.h
+++ b/include/configs/mx51_efikamx.h
@@ -127,9 +127,9 @@
 #endif
 
 /* SPI PMIC */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_SPI
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
 #define CONFIG_FSL_PMIC_BUS		0
 #define CONFIG_FSL_PMIC_CS		(0 | 120 << 8)
 #define CONFIG_FSL_PMIC_CLK		25000000
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 4e82355..fa0db38 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -69,9 +69,9 @@
 #define CONFIG_MXC_SPI
 
 /* PMIC Controller */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_SPI
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
 #define CONFIG_FSL_PMIC_BUS	0
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	2500000
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index c472075..a0af3ee 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -55,9 +55,9 @@
 #define CONFIG_SYS_I2C_SPEED            100000
 
 /* PMIC Configs */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_FSL
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    8
 #define CONFIG_PMIC_FSL_MC13892
 #define CONFIG_RTC_MC13XXX
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 37f9d69..e30502b 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -89,10 +89,10 @@
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* PMIC Controller */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_DIALOG_PMIC
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_DIALOG_POWER
+#define CONFIG_POWER_FSL
 #define CONFIG_PMIC_FSL_MC13892
 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR	0x48
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x8
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 6ebdaa8..138e460 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -51,7 +51,7 @@
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_MMC_BOUNCE_BUFFER
+#define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index b8621b8..0f226f7 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -46,7 +46,7 @@
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_MMC_BOUNCE_BUFFER
+#define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 759275a..4ce4d4c 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -73,7 +73,7 @@
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_MMC_BOUNCE_BUFFER
+#define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
index 69ff3ef..624bd5c 100644
--- a/include/configs/nios2-generic.h
+++ b/include/configs/nios2-generic.h
@@ -68,6 +68,7 @@
 #define CONFIG_SYS_ALTERA_PIO_GPIO_NUM	LED_PIO_WIDTH
 
 #define CONFIG_STATUS_LED		/* Enable status driver */
+#define CONFIG_BOARD_SPECIFIC_LED
 #define CONFIG_GPIO_LED		/* Enable GPIO LED driver */
 #define CONFIG_GPIO			/* Enable GPIO driver */
 
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 7a3cc16..12d65f2 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -117,21 +117,19 @@
 #define CONFIG_SYS_I2C_NOPROBES		{{0x0, 0x0}}
 
 /* USB */
-#define CONFIG_MUSB_UDC			1
-#define CONFIG_USB_OMAP3		1
+#define CONFIG_MUSB_GADGET
+#define CONFIG_USB_MUSB_OMAP2PLUS
+#define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_TWL4030_USB		1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE		1
-#define CONFIG_USB_TTY			1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETHER_RNDIS
 
 /* USB EHCI */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 
 #define CONFIG_USB_EHCI_OMAP
-/*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	147
 
 #define CONFIG_USB_ULPI
@@ -414,6 +412,9 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_OMAP3_ID_NAND
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index f6e4236..b4d925e 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -113,6 +113,9 @@
 /* NAND SPL */
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h
index 362fa1d..8f02584 100644
--- a/include/configs/omap3_evm_quick_nand.h
+++ b/include/configs/omap3_evm_quick_nand.h
@@ -81,6 +81,9 @@
  */
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 626cf7a..fd31c73 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -319,6 +319,9 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 350150b..964bfcd 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -38,6 +38,7 @@
 #define __SW_BOOT_MASK		0x03
 #define __SW_BOOT_NOR		0xe4
 #define __SW_BOOT_SD		0x54
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1020UTM)
@@ -46,6 +47,7 @@
 #define __SW_BOOT_MASK		0x03
 #define __SW_BOOT_NOR		0xe0
 #define __SW_BOOT_SD		0x50
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1020RDB)
@@ -61,6 +63,7 @@
 #define __SW_BOOT_SD		0x9c
 #define __SW_BOOT_NAND		0xec
 #define __SW_BOOT_PCIE		0x6c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1021RDB)
@@ -78,6 +81,7 @@
 #define __SW_BOOT_SD		0x9c
 #define __SW_BOOT_NAND		0xec
 #define __SW_BOOT_PCIE		0x6c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1024RDB)
@@ -91,6 +95,7 @@
 #define __SW_BOOT_SPI		0x08
 #define __SW_BOOT_SD		0x04
 #define __SW_BOOT_NAND		0x0c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1025RDB)
@@ -108,6 +113,7 @@
 #define __SW_BOOT_SPI		0x08
 #define __SW_BOOT_SD		0x04
 #define __SW_BOOT_NAND		0x0c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P2020RDB)
@@ -122,6 +128,14 @@
 #define __SW_BOOT_SD		0x68 /* or 0x18 */
 #define __SW_BOOT_NAND		0xe8
 #define __SW_BOOT_PCIE		0xa8
+#define CONFIG_SYS_L2_SIZE	(512 << 10)
+#endif
+
+#if CONFIG_SYS_L2_SIZE >= (512 << 10)
+/* must be 32-bit */
+#define CONFIG_SYS_INIT_L2_ADDR	0xf8f80000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -140,16 +154,39 @@
 #define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
 #endif
 
-#if defined(CONFIG_NAND) && defined(CONFIG_NAND_FSL_ELBC)
-#define CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_TEXT_BASE_SPL	0xff800000
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE_SPL
+#ifdef CONFIG_NAND
+#define CONFIG_SPL
+#define CONFIG_SPL_INIT_MINIMAL
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
+
+#define CONFIG_SPL_TEXT_BASE		0xfffff000
+#define CONFIG_SPL_MAX_SIZE		(4 * 1024)
+
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+/* We multiply CONFIG_SPL_MAX_SIZE by two to leave some room for BSS. */
+#define CONFIG_SYS_TEXT_BASE		0xf8f82000
+#define CONFIG_SPL_RELOC_TEXT_BASE	\
+	(CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2)
+#define CONFIG_SPL_RELOC_STACK		\
+	(CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2)
+#define CONFIG_SYS_NAND_U_BOOT_DST	(CONFIG_SYS_INIT_L2_ADDR)
+#define CONFIG_SYS_NAND_U_BOOT_START	\
+	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SPL_MAX_SIZE)
 #else
-#define CONFIG_SYS_TEXT_BASE		0x11001000
-#endif /* CONFIG_NAND_SPL */
+#define CONFIG_SYS_TEXT_BASE		0x00201000
+#define CONFIG_SPL_RELOC_TEXT_BASE	0x00100000
+#define CONFIG_SPL_RELOC_STACK		0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_DST	(0x00200000 - CONFIG_SPL_MAX_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
+#endif
+
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0
+#define CONFIG_SYS_LDSCRIPT		"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
@@ -161,8 +198,12 @@
 #endif
 
 #ifndef CONFIG_SYS_MONITOR_BASE
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
+#else
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
 #endif
+#endif
 
 /* High Level Configuration Options */
 #define CONFIG_BOOKE
@@ -221,7 +262,7 @@
 
 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
        SPL code*/
-#if defined(CONFIG_NAND_SPL)
+#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
@@ -248,39 +289,7 @@
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 
 /* Default settings for DDR3 */
-#ifdef CONFIG_P2020RDB
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014202
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_CS1_BNDS		0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG	0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG_2	0x00000000
-
-#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-
-#define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CONTROL	0x8645F607
-#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#define CONFIG_SYS_DDR_CONTROL		0xC7000000	/* Type = DDR3	*/
-#define CONFIG_SYS_DDR_CONTROL_2	0x24401000
-#define CONFIG_SYS_DDR_TIMING_4		0x00220001
-#define CONFIG_SYS_DDR_TIMING_5		0x02401400
-
-#define CONFIG_SYS_DDR_TIMING_3		0x00020000
-#define CONFIG_SYS_DDR_TIMING_0		0x00330104
-#define CONFIG_SYS_DDR_TIMING_1		0x6f6B4644
-#define CONFIG_SYS_DDR_TIMING_2		0x0FA88CCF
-#define CONFIG_SYS_DDR_CLK_CTRL		0x02000000
-#define CONFIG_SYS_DDR_MODE_1		0x00421422
-#define CONFIG_SYS_DDR_MODE_2		0x04000000
-#define CONFIG_SYS_DDR_INTERVAL		0x0C300100
-
-#else
+#ifndef CONFIG_P2020RDB
 #define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
 #define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
 #define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
@@ -318,21 +327,18 @@
 /*
  * Memory map
  *
- * 0x0000_0000 0x7fff_ffff	DDR	Up to 2GB cacheable
+ * 0x0000_0000 0x7fff_ffff	DDR		Up to 2GB cacheable
  * 0x8000_0000 0xdfff_ffff	PCI Express Mem	1.5G non-cacheable(PCIe * 3)
+ * 0xec00_0000 0xefff_ffff	NOR flash	Up to 64M non-cacheable	CS0/1
+ * 0xf8f8_0000 0xf8ff_ffff	L2 SRAM		Up to 512K cacheable
+ *   (early boot only)
+ * 0xff80_0000 0xff80_7fff	NAND flash	32K non-cacheable	CS1/0
+ * 0xff98_0000 0xff98_ffff	PMC		64K non-cacheable	CS2
+ * 0xffa0_0000 0xffaf_ffff	CPLD		1M non-cacheable	CS3
+ * 0xffb0_0000 0xffbf_ffff	VSC7385 switch  1M non-cacheable	CS2
  * 0xffc0_0000 0xffc3_ffff	PCI IO range	256k non-cacheable
- *
- * Localbus cacheable (TBD)
- * 0xXXXX_XXXX 0xXXXX_XXXX	SRAM	YZ M Cacheable
- *
- * Localbus non-cacheable
- * 0xec00_0000 0xefff_ffff	FLASH	Up to 64M non-cacheable
- * 0xff80_0000 0xff8f_ffff	NAND flash	1M non-cacheable
- * 0xff90_0000 0xff97_ffff	L2 SDRAM(REV.)  512K cacheable(optional)
- * 0xffa0_0000 0xffaf_ffff	CPLD	1M non-cacheable
- * 0xffb0_0000 0xffbf_ffff	VSC7385 switch  1M non-cacheable
- * 0xffd0_0000 0xffd0_3fff	L1 for stack	16K Cacheable TLB0
- * 0xffe0_0000 0xffef_ffff	CCSR	1M non-cacheable
+ * 0xffd0_0000 0xffd0_3fff	L1 for stack	16K cacheable
+ * 0xffe0_0000 0xffef_ffff	CCSR		1M non-cacheable
  */
 
 
@@ -392,15 +398,6 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(16 * 1024)
 
-/* NAND boot: 4K NAND loader config */
-#define CONFIG_SYS_NAND_SPL_SIZE	0x1000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) + CONFIG_SYS_NAND_SPL_SIZE)
-#define CONFIG_SYS_NAND_U_BOOT_DST	(0x11000000 - CONFIG_SYS_NAND_SPL_SIZE)
-#define CONFIG_SYS_NAND_U_BOOT_START	0x11000000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	(0)
-#define CONFIG_SYS_NAND_U_BOOT_RELOC	0x00010000
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP	(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-
 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 	| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
 	| BR_PS_8	/* Port Size = 8 bit */ \
@@ -461,7 +458,7 @@
 				 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 				 OR_GPCM_EAD)
 
-#ifdef CONFIG_NAND_U_BOOT
+#ifdef CONFIG_NAND
 #define CONFIG_SYS_BR0_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 #define CONFIG_SYS_OR0_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #define CONFIG_SYS_BR1_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
@@ -511,7 +508,7 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
@@ -709,7 +706,6 @@
 /*
  * Environment
  */
-#ifdef CONFIG_SYS_RAMBOOT
 #ifdef CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS	0
@@ -724,16 +720,15 @@
 #define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_SYS_MMC_ENV_DEV	0
-#elif defined(CONFIG_NAND_U_BOOT)
+#elif defined(CONFIG_NAND)
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
 #define CONFIG_ENV_OFFSET	((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
-#else
+#elif defined(CONFIG_SYS_RAMBOOT)
 #define CONFIG_ENV_IS_NOWHERE	/* Store ENV in memory only */
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 #define CONFIG_ENV_SIZE		0x2000
-#endif
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
diff --git a/include/configs/qong.h b/include/configs/qong.h
index e43a021..d9bf201 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -58,9 +58,9 @@
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 #define CONFIG_RTC_MC13XXX
 
-#define CONFIG_PMIC
-#define CONFIG_PMIC_SPI
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	100000
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 7e0b302..56e8347 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -215,9 +215,9 @@
 
 #define CONFIG_SYS_CACHELINE_SIZE       64
 
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX8998
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX8998
 
 #include <asm/arch/gpio.h>
 /*
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 035c27f..eb13bb3 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -256,9 +256,9 @@
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_MAX_I2C_BUS	7
 
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX8998
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX8998
 
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h
index f5dc393..cb99d58 100644
--- a/include/configs/sc_sps_1.h
+++ b/include/configs/sc_sps_1.h
@@ -140,7 +140,7 @@
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_APBH_DMA
 #define CONFIG_MMC
-#define CONFIG_MMC_BOUNCE_BUFFER
+#define CONFIG_BOUNCE_BUFFER
 #define CONFIG_GENERIC_MMC
 #define CONFIG_MXS_MMC
 #endif
diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index c2d1c66..94116f1 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -103,6 +103,9 @@
 #define CONFIG_TEGRA_KEYBOARD
 #define CONFIG_KEYBOARD
 
+/* USB keyboard */
+#define CONFIG_USB_KEYBOARD
+
 #undef TEGRA_DEVICE_SETTINGS
 #define TEGRA_DEVICE_SETTINGS	"stdin=serial,tegra-kbc\0" \
 				"stdout=serial,lcd\0" \
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 8e6954e..dd5d7cd 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -288,9 +288,6 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_EHCI_MMIO_BIG_ENDIAN
 #define CONFIG_EHCI_DESC_BIG_ENDIAN
-#ifdef CONFIG_4xx_DCACHE
-#define CONFIG_EHCI_DCACHE
-#endif
 #else /* CONFIG_USB_EHCI */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index dd7757c..ee73c27 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -106,8 +106,6 @@
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_STORAGE
 
-/* #define CONFIG_EHCI_DCACHE */
-
 /* commands to include */
 #include <config_cmd_default.h>
 
@@ -254,6 +252,9 @@
 #define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index 2d0d61d..ab62e71 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -146,6 +146,25 @@
 	"fdt_addr_r=0x02000000\0" \
 	"ramdisk_addr_r=0x02100000\0" \
 
+#ifdef CONFIG_TEGRA_KEYBOARD
+#define STDIN_KBD_KBC ",tegra-kbc"
+#else
+#define STDIN_KBD_KBC ""
+#endif
+
+#ifdef CONFIG_USB_KEYBOARD
+#define STDIN_KBD_USB ",usbkbd"
+#define CONFIG_SYS_USB_EVENT_POLL
+#define CONFIG_PREBOOT			"usb start"
+#else
+#define STDIN_KBD_USB ""
+#endif
+
+#define TEGRA_DEVICE_SETTINGS \
+	"stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \
+	"stdout=serial\0" \
+	"stderr=serial\0" \
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	TEGRA_DEVICE_SETTINGS \
 	MEM_LAYOUT_ENV_SETTINGS \
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index 72b661a..fe07f72 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -103,7 +103,6 @@
  */
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	10
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_EHCI_DCACHE
 
 /* Total I2C ports on Tegra20 */
 #define TEGRA_I2C_NUM_CONTROLLERS	4
@@ -128,12 +127,8 @@
 
 #define CONFIG_SYS_NO_FLASH
 
-/* Environment information, boards can override if required */
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define TEGRA_DEVICE_SETTINGS	"stdin=serial\0" \
-				"stdout=serial\0" \
-				"stderr=serial\0"
 
 #define CONFIG_LOADADDR		0x408000	/* def. location for kernel */
 #define CONFIG_BOOTDELAY	2		/* -1 to disable auto boot */
@@ -210,4 +205,7 @@
 #define CONFIG_SYS_NAND_SELF_INIT
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
+/* Misc utility code */
+#define CONFIG_BOUNCE_BUFFER
+
 #endif /* __TEGRA20_COMMON_H */
diff --git a/include/configs/trats.h b/include/configs/trats.h
index a24e945..78d7ea3 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -239,10 +239,16 @@
 #define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin()
 #define I2C_INIT multi_i2c_init()
 
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX8997
-
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX8997
+
+#define CONFIG_POWER_FG
+#define CONFIG_POWER_FG_MAX17042
+#define CONFIG_POWER_MUIC
+#define CONFIG_POWER_MUIC_MAX8997
+#define CONFIG_POWER_BATTERY
+#define CONFIG_POWER_BATTERY_TRATS
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
 #define CONFIG_USB_GADGET_DUALSPEED
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 5859a73..be0d2ec 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -282,6 +282,9 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
diff --git a/include/configs/tt01.h b/include/configs/tt01.h
index f46efa5..9f8f240 100644
--- a/include/configs/tt01.h
+++ b/include/configs/tt01.h
@@ -149,9 +149,9 @@
 #define CONFIG_MXC_GPIO
 
 /* MC13783 connected to CSPI3 and SS0 */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_SPI
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
 
 #define CONFIG_FSL_PMIC_BUS		2
 #define CONFIG_FSL_PMIC_CS		0
diff --git a/include/configs/vct.h b/include/configs/vct.h
index b4b0949..7aeb668 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -136,7 +136,6 @@
  */
 #define CONFIG_USB_EHCI			/* Enable EHCI USB support	*/
 #define CONFIG_USB_EHCI_VCT		/* on VCT platform		*/
-#define CONFIG_EHCI_DCACHE		/* with dcache handling support	*/
 #define CONFIG_EHCI_MMIO_BIG_ENDIAN
 #define CONFIG_EHCI_DESC_BIG_ENDIAN
 #define CONFIG_EHCI_IS_TDI
diff --git a/include/configs/ventana.h b/include/configs/ventana.h
index 8f45522..b55ebc9 100644
--- a/include/configs/ventana.h
+++ b/include/configs/ventana.h
@@ -78,6 +78,9 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
+/* USB keyboard */
+#define CONFIG_USB_KEYBOARD
+
 #include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index 13c5702..226d049 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -87,9 +87,9 @@
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 
 /* PMIC Controller */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_SPI
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
 #define CONFIG_FSL_PMIC_BUS	0
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	2500000
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 64e5cff..70d0e97 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -40,10 +40,12 @@
 typedef u64 fdt_addr_t;
 #define FDT_ADDR_T_NONE (-1ULL)
 #define fdt_addr_to_cpu(reg) be64_to_cpu(reg)
+#define fdt_size_to_cpu(reg) be64_to_cpu(reg)
 #else
 typedef u32 fdt_addr_t;
 #define FDT_ADDR_T_NONE (-1U)
 #define fdt_addr_to_cpu(reg) be32_to_cpu(reg)
+#define fdt_size_to_cpu(reg) be32_to_cpu(reg)
 #endif
 
 /* Information obtained about memory from the FDT */
@@ -90,6 +92,22 @@ struct fdt_gpio_state {
 #define fdt_gpio_isvalid(x) ((x)->gpio != FDT_GPIO_NONE)
 
 /**
+ * Read the GPIO taking into account the polarity of the pin.
+ *
+ * @param gpio		pointer to the decoded gpio
+ * @return value of the gpio if successful, < 0 if unsuccessful
+ */
+int fdtdec_get_gpio(struct fdt_gpio_state *gpio);
+
+/**
+ * Write the GPIO taking into account the polarity of the pin.
+ *
+ * @param gpio		pointer to the decoded gpio
+ * @return 0 if successful
+ */
+int fdtdec_set_gpio(struct fdt_gpio_state *gpio, int val);
+
+/**
  * Find the next numbered alias for a peripheral. This is used to enumerate
  * all the peripherals of a certain type.
  *
@@ -110,6 +128,19 @@ int fdtdec_next_alias(const void *blob, const char *name,
 		enum fdt_compat_id id, int *upto);
 
 /**
+ * Find the compatible ID for a given node.
+ *
+ * Generally each node has at least one compatible string attached to it.
+ * This function looks through our list of known compatible strings and
+ * returns the corresponding ID which matches the compatible string.
+ *
+ * @param blob		FDT blob to use
+ * @param node		Node containing compatible string to find
+ * @return compatible ID, or COMPAT_UNKNOWN if we cannot find a match
+ */
+enum fdt_compat_id fdtdec_lookup(const void *blob, int node);
+
+/**
  * Find the next compatible node for a peripheral.
  *
  * Do the first call with node = 0. This function will return a pointer to
@@ -169,6 +200,21 @@ s32 fdtdec_get_int(const void *blob, int node, const char *prop_name,
 		s32 default_val);
 
 /**
+ * Look up a 64-bit integer property in a node and return it. The property
+ * must have at least 8 bytes of data (2 cells). The first two cells are
+ * concatenated to form a 8 bytes value, where the first cell is top half and
+ * the second cell is bottom half.
+ *
+ * @param blob	FDT blob
+ * @param node	node to examine
+ * @param prop_name	name of property to find
+ * @param default_val	default value to return if the property is not found
+ * @return integer value, if found, or default_val if not
+ */
+uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name,
+		uint64_t default_val);
+
+/**
  * Checks whether a node is enabled.
  * This looks for a 'status' property. If this exists, then returns 1 if
  * the status is 'ok' and 0 otherwise. If there is no status property,
@@ -345,6 +391,22 @@ int fdtdec_decode_gpio(const void *blob, int node, const char *prop_name,
 		struct fdt_gpio_state *gpio);
 
 /**
+ * Decode a list of GPIOs from an FDT. This creates a list of GPIOs with no
+ * terminating item.
+ *
+ * @param blob         FDT blob to use
+ * @param node         Node to look at
+ * @param prop_name    Node property name
+ * @param gpio         Array of gpio elements to fill from FDT. This will be
+ *                     untouched if either 0 or an error is returned
+ * @param max_count    Maximum number of elements allowed
+ * @return number of GPIOs read if ok, -FDT_ERR_BADLAYOUT if max_count would
+ * be exceeded, or -FDT_ERR_NOTFOUND if the property is missing.
+ */
+int fdtdec_decode_gpios(const void *blob, int node, const char *prop_name,
+		struct fdt_gpio_state *gpio, int max_count);
+
+/**
  * Set up a GPIO pin according to the provided gpio information. At present this
  * just requests the GPIO.
  *
@@ -356,6 +418,39 @@ int fdtdec_decode_gpio(const void *blob, int node, const char *prop_name,
  */
 int fdtdec_setup_gpio(struct fdt_gpio_state *gpio);
 
+/**
+ * Look in the FDT for a config item with the given name and return its value
+ * as a 32-bit integer. The property must have at least 4 bytes of data. The
+ * value of the first cell is returned.
+ *
+ * @param blob		FDT blob to use
+ * @param prop_name	Node property name
+ * @param default_val	default value to return if the property is not found
+ * @return integer value, if found, or default_val if not
+ */
+int fdtdec_get_config_int(const void *blob, const char *prop_name,
+		int default_val);
+
+/**
+ * Look in the FDT for a config item with the given name
+ * and return whether it exists.
+ *
+ * @param blob		FDT blob
+ * @param prop_name	property name to look up
+ * @return 1, if it exists, or 0 if not
+ */
+int fdtdec_get_config_bool(const void *blob, const char *prop_name);
+
+/**
+ * Look in the FDT for a config item with the given name and return its value
+ * as a string.
+ *
+ * @param blob          FDT blob
+ * @param prop_name     property name to look up
+ * @returns property string, NULL on error.
+ */
+char *fdtdec_get_config_string(const void *blob, const char *prop_name);
+
 /*
  * Look up a property in a node and return its contents in a byte
  * array of given length. The property must have at least enough data for
@@ -387,4 +482,21 @@ int fdtdec_get_byte_array(const void *blob, int node, const char *prop_name,
  */
 const u8 *fdtdec_locate_byte_array(const void *blob, int node,
 			     const char *prop_name, int count);
+
+/**
+ * Look up a property in a node which contains a memory region address and
+ * size. Then return a pointer to this address.
+ *
+ * The property must hold one address with a length. This is only tested on
+ * 32-bit machines.
+ *
+ * @param blob		FDT blob
+ * @param node		node to examine
+ * @param prop_name	name of property to find
+ * @param ptrp		returns pointer to region, or NULL if no address
+ * @param size		returns size of region
+ * @return 0 if ok, -1 on error (propery not found)
+ */
+int fdtdec_decode_region(const void *blob, int node,
+		const char *prop_name, void **ptrp, size_t *size);
 #endif
diff --git a/include/g_dnl.h b/include/g_dnl.h
index 0ec7440..f47395f 100644
--- a/include/g_dnl.h
+++ b/include/g_dnl.h
@@ -22,7 +22,6 @@
 #define __G_DOWNLOAD_H_
 
 #include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
 #include <linux/usb/gadget.h>
 
 int g_dnl_register(const char *s);
diff --git a/include/image.h b/include/image.h
index 0a895f2..f54d983 100644
--- a/include/image.h
+++ b/include/image.h
@@ -615,6 +615,7 @@ int fit_image_check_type(const void *fit, int noffset, uint8_t type);
 int fit_image_check_comp(const void *fit, int noffset, uint8_t comp);
 int fit_check_format(const void *fit);
 
+int fit_conf_find_compat(const void *fit, const void *fdt);
 int fit_conf_get_node(const void *fit, const char *conf_uname);
 int fit_conf_get_kernel_node(const void *fit, int noffset);
 int fit_conf_get_ramdisk_node(const void *fit, int noffset);
diff --git a/include/lcd.h b/include/lcd.h
index 8f84741..c24164a 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -302,6 +302,42 @@ void	lcd_printf	(const char *fmt, ...);
 void	lcd_clear(void);
 int	lcd_display_bitmap(ulong bmp_image, int x, int y);
 
+/**
+ * Get the width of the LCD in pixels
+ *
+ * @return width of LCD in pixels
+ */
+int lcd_get_pixel_width(void);
+
+/**
+ * Get the height of the LCD in pixels
+ *
+ * @return height of LCD in pixels
+ */
+int lcd_get_pixel_height(void);
+
+/**
+ * Get the number of text lines/rows on the LCD
+ *
+ * @return number of rows
+ */
+int lcd_get_screen_rows(void);
+
+/**
+ * Get the number of text columns on the LCD
+ *
+ * @return number of columns
+ */
+int lcd_get_screen_columns(void);
+
+/**
+ * Set the position of the text cursor
+ *
+ * @param col	Column to place cursor (0 = left side)
+ * @param row	Row to place cursor (0 = top line)
+ */
+void lcd_position_cursor(unsigned col, unsigned row);
+
 /* Allow boards to customize the information displayed */
 void lcd_show_board_info(void);
 
diff --git a/include/linux/byteorder/swab.h b/include/linux/byteorder/swab.h
index bb4a046..4334fa7 100644
--- a/include/linux/byteorder/swab.h
+++ b/include/linux/byteorder/swab.h
@@ -122,7 +122,6 @@ static __inline__ void __swab32s(__u32 *addr)
 	__arch__swab32s(addr);
 }
 
-#ifdef __BYTEORDER_HAS_U64__
 static __inline__ __attribute__((const)) __u64 __fswab64(__u64 x)
 {
 #  ifdef __SWAB_64_THRU_32__
@@ -141,7 +140,6 @@ static __inline__ void __swab64s(__u64 *addr)
 {
 	__arch__swab64s(addr);
 }
-#endif /* __BYTEORDER_HAS_U64__ */
 
 #if defined(__KERNEL__)
 #define swab16 __swab16
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index f63e04b..e9e9045 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -194,6 +194,9 @@ typedef enum {
 /* Device behaves just like nand, but is readonly */
 #define NAND_ROM		0x00000800
 
+/* Device supports subpage reads */
+#define NAND_SUBPAGE_READ       0x00001000
+
 /* Options valid for Samsung large page devices */
 #define NAND_SAMSUNG_LP_OPTIONS \
 	(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
@@ -203,9 +206,7 @@ typedef enum {
 #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
 #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
 #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
-/* Large page NAND with SOFT_ECC should support subpage reads */
-#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
-					&& (chip->page_shift > 9))
+#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
 
 /* Non chip related options */
 /*
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index ce1d1e1..d1d732c 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -28,15 +28,13 @@
  * [c] for consistency, removing all doubt even when it appears to
  *     someone that the two other points are non-issues for that
  *     particular descriptor type.
- *
- * Ported to U-boot by: Thomas Smits <ts.smits@gmail.com> and
- *                      Remy Bohmer <linux@bohmer.net>
  */
 
 #ifndef __LINUX_USB_CH9_H
 #define __LINUX_USB_CH9_H
 
 #include <linux/types.h>	/* __u8 etc */
+#include <asm/byteorder.h>	/* le16_to_cpu */
 
 /*-------------------------------------------------------------------------*/
 
@@ -70,7 +68,7 @@
 #define USB_RECIP_OTHER			0x03
 /* From Wireless USB 1.0 */
 #define USB_RECIP_PORT			0x04
-#define USB_RECIP_RPIPE			0x05
+#define USB_RECIP_RPIPE		0x05
 
 /*
  * Standard requests, for the bRequest field of a SETUP packet.
@@ -90,6 +88,8 @@
 #define USB_REQ_GET_INTERFACE		0x0A
 #define USB_REQ_SET_INTERFACE		0x0B
 #define USB_REQ_SYNCH_FRAME		0x0C
+#define USB_REQ_SET_SEL			0x30
+#define USB_REQ_SET_ISOCH_DELAY		0x31
 
 #define USB_REQ_SET_ENCRYPTION		0x0D	/* Wireless USB */
 #define USB_REQ_GET_ENCRYPTION		0x0E
@@ -105,10 +105,16 @@
 #define USB_REQ_LOOPBACK_DATA_READ	0x16
 #define USB_REQ_SET_INTERFACE_DS	0x17
 
+/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
+ * used by hubs to put ports into a new L1 suspend state, except that it
+ * forgot to define its number ...
+ */
+
 /*
  * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
  * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
- * are at most sixteen features of each type.)
+ * are at most sixteen features of each type.)  Hubs may also support a
+ * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
  */
 #define USB_DEVICE_SELF_POWERED		0	/* (read only) */
 #define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
@@ -120,8 +126,38 @@
 #define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
 #define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
 
+/*
+ * Test Mode Selectors
+ * See USB 2.0 spec Table 9-7
+ */
+#define	TEST_J		1
+#define	TEST_K		2
+#define	TEST_SE0_NAK	3
+#define	TEST_PACKET	4
+#define	TEST_FORCE_EN	5
+
+/*
+ * New Feature Selectors as added by USB 3.0
+ * See USB 3.0 spec Table 9-6
+ */
+#define USB_DEVICE_U1_ENABLE	48	/* dev may initiate U1 transition */
+#define USB_DEVICE_U2_ENABLE	49	/* dev may initiate U2 transition */
+#define USB_DEVICE_LTM_ENABLE	50	/* dev may send LTM */
+#define USB_INTRF_FUNC_SUSPEND	0	/* function suspend */
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK	0xFF00
+/*
+ * Suspend Options, Table 9-7 USB 3.0 spec
+ */
+#define USB_INTRF_FUNC_SUSPEND_LP	(1 << (8 + 0))
+#define USB_INTRF_FUNC_SUSPEND_RW	(1 << (8 + 1))
+
 #define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
 
+/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
+#define USB_DEV_STAT_U1_ENABLED		2	/* transition into U1 state */
+#define USB_DEV_STAT_U2_ENABLED		3	/* transition into U2 state */
+#define USB_DEV_STAT_LTM_ENABLED	4	/* Latency tolerance messages */
 
 /**
  * struct usb_ctrlrequest - SETUP data for a USB device control request
@@ -140,10 +176,6 @@
  * For most devices, interfaces don't coordinate with each other, so
  * such requests may be made at any time.
  */
-#if defined(__BIG_ENDIAN) || defined(__ARMEB__)
-#error (functionality not verified for big endian targets, todo...)
-#endif
-
 struct usb_ctrlrequest {
 	__u8 bRequestType;
 	__u8 bRequest;
@@ -159,8 +191,12 @@ struct usb_ctrlrequest {
  * (rarely) accepted by SET_DESCRIPTOR.
  *
  * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire".  But when exposed through Linux-USB APIs,
- * they've been converted to cpu byte order.
+ * byte order "on the wire".  Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
  */
 
 /*
@@ -187,6 +223,11 @@ struct usb_ctrlrequest {
 #define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
 #define USB_DT_WIRE_ADAPTER		0x21
 #define USB_DT_RPIPE			0x22
+#define USB_DT_CS_RADIO_CONTROL		0x23
+/* From the T10 UAS specification */
+#define USB_DT_PIPE_USAGE		0x24
+/* From the USB 3.0 spec */
+#define	USB_DT_SS_ENDPOINT_COMP		0x30
 
 /* Conventional codes for class-specific descriptors.  The convention is
  * defined in the USB "Common Class" Spec (3.11).  Individual class specs
@@ -204,6 +245,28 @@ struct usb_descriptor_header {
 	__u8  bDescriptorType;
 } __attribute__ ((packed));
 
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE: Device descriptor */
+struct usb_device_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 bcdUSB;
+	__u8  bDeviceClass;
+	__u8  bDeviceSubClass;
+	__u8  bDeviceProtocol;
+	__u8  bMaxPacketSize0;
+	__le16 idVendor;
+	__le16 idProduct;
+	__le16 bcdDevice;
+	__u8  iManufacturer;
+	__u8  iProduct;
+	__u8  iSerialNumber;
+	__u8  bNumConfigurations;
+} __attribute__ ((packed));
+
 #define USB_DT_DEVICE_SIZE		18
 
 
@@ -230,6 +293,8 @@ struct usb_descriptor_header {
 #define USB_CLASS_APP_SPEC		0xfe
 #define USB_CLASS_VENDOR_SPEC		0xff
 
+#define USB_SUBCLASS_VENDOR_SPEC	0xff
+
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_CONFIG: Configuration descriptor information.
@@ -260,11 +325,56 @@ struct usb_config_descriptor {
 #define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
 #define USB_CONFIG_ATT_BATTERY		(1 << 4)	/* battery powered */
 
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_STRING: String descriptor */
+struct usb_string_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wData[1];		/* UTF-16LE encoded */
+} __attribute__ ((packed));
+
 /* note that "string" zero is special, it holds language codes that
  * the device supports, not Unicode characters.
  */
 
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE: Interface descriptor */
+struct usb_interface_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bInterfaceNumber;
+	__u8  bAlternateSetting;
+	__u8  bNumEndpoints;
+	__u8  bInterfaceClass;
+	__u8  bInterfaceSubClass;
+	__u8  bInterfaceProtocol;
+	__u8  iInterface;
+} __attribute__ ((packed));
+
 #define USB_DT_INTERFACE_SIZE		9
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENDPOINT: Endpoint descriptor */
+struct usb_endpoint_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bEndpointAddress;
+	__u8  bmAttributes;
+	__le16 wMaxPacketSize;
+	__u8  bInterval;
+
+	/* NOTE:  these two are _only_ in audio endpoints. */
+	/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
+	__u8  bRefresh;
+	__u8  bSynchAddress;
+} __attribute__ ((packed));
+
 #define USB_DT_ENDPOINT_SIZE		7
 #define USB_DT_ENDPOINT_AUDIO_SIZE	9	/* Audio extension */
 
@@ -282,6 +392,254 @@ struct usb_config_descriptor {
 #define USB_ENDPOINT_XFER_INT		3
 #define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
 
+/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
+#define USB_ENDPOINT_INTRTYPE		0x30
+#define USB_ENDPOINT_INTR_PERIODIC	(0 << 4)
+#define USB_ENDPOINT_INTR_NOTIFICATION	(1 << 4)
+
+#define USB_ENDPOINT_SYNCTYPE		0x0c
+#define USB_ENDPOINT_SYNC_NONE		(0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC		(1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE	(2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC		(3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK		0x30
+#define USB_ENDPOINT_USAGE_DATA		0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK	0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB	0x20	/* Implicit feedback Data endpoint */
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_endpoint_num - get the endpoint's number
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's number: 0 to 15.
+ */
+static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+}
+
+/**
+ * usb_endpoint_type - get the endpoint's transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
+ * to @epd's transfer type.
+ */
+static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+}
+
+/**
+ * usb_endpoint_dir_in - check if the endpoint has IN direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type IN, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
+}
+
+/**
+ * usb_endpoint_dir_out - check if the endpoint has OUT direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type OUT, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+}
+
+/**
+ * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type bulk, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_bulk(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_BULK);
+}
+
+/**
+ * usb_endpoint_xfer_control - check if the endpoint has control transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type control, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_control(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_CONTROL);
+}
+
+/**
+ * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type interrupt, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_int(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_INT);
+}
+
+/**
+ * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type isochronous, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_isoc(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_ISOC);
+}
+
+/**
+ * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_maxp - get endpoint's max packet size
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's max packet
+ */
+static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
+{
+	return __le16_to_cpu(epd->wMaxPacketSize);
+}
+
+static inline int usb_endpoint_interrupt_type(
+		const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
+struct usb_ss_ep_comp_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bMaxBurst;
+	__u8  bmAttributes;
+	__le16 wBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SS_EP_COMP_SIZE		6
+
+/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
+static inline int
+usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
+{
+	int		max_streams;
+
+	if (!comp)
+		return 0;
+
+	max_streams = comp->bmAttributes & 0x1f;
+
+	if (!max_streams)
+		return 0;
+
+	max_streams = 1 << max_streams;
+
+	return max_streams;
+}
+
+/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
+#define USB_SS_MULT(p)			(1 + ((p) & 0x3))
 
 /*-------------------------------------------------------------------------*/
 
@@ -388,7 +746,7 @@ struct usb_encryption_descriptor {
 
 /*-------------------------------------------------------------------------*/
 
-/* USB_DT_BOS:  group of wireless capabilities */
+/* USB_DT_BOS:  group of device-level capabilities */
 struct usb_bos_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;
@@ -397,6 +755,7 @@ struct usb_bos_descriptor {
 	__u8  bNumDeviceCaps;
 } __attribute__((packed));
 
+#define USB_DT_BOS_SIZE		5
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_DEVICE_CAPABILITY:  grouped with BOS */
@@ -434,6 +793,61 @@ struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
 	__u8  bReserved;
 } __attribute__((packed));
 
+/* USB 2.0 Extension descriptor */
+#define	USB_CAP_TYPE_EXT		2
+
+struct usb_ext_cap_descriptor {		/* Link Power Management */
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__le32 bmAttributes;
+#define USB_LPM_SUPPORT			(1 << 1)	/* supports LPM */
+#define USB_BESL_SUPPORT		(1 << 2)	/* supports BESL */
+#define USB_BESL_BASELINE_VALID		(1 << 3)	/* Baseline BESL valid*/
+#define USB_BESL_DEEP_VALID		(1 << 4)	/* Deep BESL valid */
+#define USB_GET_BESL_BASELINE(p)	(((p) & (0xf << 8)) >> 8)
+#define USB_GET_BESL_DEEP(p)		(((p) & (0xf << 12)) >> 12)
+} __attribute__((packed));
+
+#define USB_DT_USB_EXT_CAP_SIZE	7
+
+/*
+ * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
+ * specific device level capabilities
+ */
+#define		USB_SS_CAP_TYPE		3
+struct usb_ss_cap_descriptor {		/* Link Power Management */
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bmAttributes;
+#define USB_LTM_SUPPORT			(1 << 1) /* supports LTM */
+	__le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION		(1)	 /* Low speed operation */
+#define USB_FULL_SPEED_OPERATION	(1 << 1) /* Full speed operation */
+#define USB_HIGH_SPEED_OPERATION	(1 << 2) /* High speed operation */
+#define USB_5GBPS_OPERATION		(1 << 3) /* Operation at 5Gbps */
+	__u8  bFunctionalitySupport;
+	__u8  bU1devExitLat;
+	__le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE	10
+
+/*
+ * Container ID Capability descriptor: Defines the instance unique ID used to
+ * identify the instance across all operating modes
+ */
+#define	CONTAINER_ID_TYPE	4
+struct usb_ss_container_id_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bReserved;
+	__u8  ContainerID[16]; /* 128-bit number */
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CONTN_ID_SIZE	20
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
@@ -491,9 +905,22 @@ enum usb_device_speed {
 	USB_SPEED_UNKNOWN = 0,			/* enumerating */
 	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
 	USB_SPEED_HIGH,				/* usb 2.0 */
-	USB_SPEED_VARIABLE,			/* wireless (usb 2.5) */
+	USB_SPEED_WIRELESS,			/* wireless (usb 2.5) */
+	USB_SPEED_SUPER,			/* usb 3.0 */
 };
 
+#ifdef __KERNEL__
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for.  If it's not
+ *   any of the speeds defined in usb_device_speed enum, string for
+ *   USB_SPEED_UNKNOWN will be returned.
+ */
+extern const char *usb_speed_string(enum usb_device_speed speed);
+
+#endif
+
 enum usb_device_state {
 	/* NOTATTACHED isn't in the USB spec, and this state acts
 	 * the same as ATTACHED ... but it's clearer this way.
@@ -503,8 +930,8 @@ enum usb_device_state {
 	/* chapter 9 and authentication (wireless) device states */
 	USB_STATE_ATTACHED,
 	USB_STATE_POWERED,			/* wired */
-	USB_STATE_UNAUTHENTICATED,		/* auth */
 	USB_STATE_RECONNECTING,			/* auth */
+	USB_STATE_UNAUTHENTICATED,		/* auth */
 	USB_STATE_DEFAULT,			/* limited function */
 	USB_STATE_ADDRESS,
 	USB_STATE_CONFIGURED,			/* most functions */
@@ -514,7 +941,64 @@ enum usb_device_state {
 	/* NOTE:  there are actually four different SUSPENDED
 	 * states, returning to POWERED, DEFAULT, ADDRESS, or
 	 * CONFIGURED respectively when SOF tokens flow again.
+	 * At this level there's no difference between L1 and L2
+	 * suspend states.  (L2 being original USB 1.1 suspend.)
 	 */
 };
 
-#endif	/* __LINUX_USB_CH9_H */
+enum usb3_link_state {
+	USB3_LPM_U0 = 0,
+	USB3_LPM_U1,
+	USB3_LPM_U2,
+	USB3_LPM_U3
+};
+
+/*
+ * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
+ * 0xff means the parent hub will accept transitions to U1, but will not
+ * initiate a transition.
+ *
+ * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
+ * U1 after that many microseconds.  Timeouts of 0x80 to 0xFE are reserved
+ * values.
+ *
+ * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
+ * 0xff means the parent hub will accept transitions to U2, but will not
+ * initiate a transition.
+ *
+ * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
+ * U2 after N*256 microseconds.  Therefore a U2 timeout value of 0x1 means a U2
+ * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
+ * 65.024ms.
+ */
+#define USB3_LPM_DISABLED		0x0
+#define USB3_LPM_U1_MAX_TIMEOUT		0x7F
+#define USB3_LPM_U2_MAX_TIMEOUT		0xFE
+#define USB3_LPM_DEVICE_INITIATED	0xFF
+
+struct usb_set_sel_req {
+	__u8	u1_sel;
+	__u8	u1_pel;
+	__le16	u2_sel;
+	__le16	u2_pel;
+} __attribute__ ((packed));
+
+/*
+ * The Set System Exit Latency control transfer provides one byte each for
+ * U1 SEL and U1 PEL, so the max exit latency is 0xFF.  U2 SEL and U2 PEL each
+ * are two bytes long.
+ */
+#define USB3_LPM_MAX_U1_SEL_PEL		0xFF
+#define USB3_LPM_MAX_U2_SEL_PEL		0xFFFF
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW		100
+
+#endif /* __LINUX_USB_CH9_H */
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
new file mode 100644
index 0000000..9f65ef9
--- /dev/null
+++ b/include/linux/usb/musb.h
@@ -0,0 +1,162 @@
+/*
+ * This is used to for host and peripheral modes of the driver for
+ * Inventra (Multidrop) Highspeed Dual-Role Controllers:  (M)HDRC.
+ *
+ * Board initialization should put one of these into dev->platform_data,
+ * probably on some platform_device named "musb-hdrc".  It encapsulates
+ * key configuration differences between boards.
+ */
+
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
+#ifndef __deprecated
+#define __deprecated
+#endif
+
+/* The USB role is defined by the connector used on the board, so long as
+ * standards are being followed.  (Developer boards sometimes won't.)
+ */
+enum musb_mode {
+	MUSB_UNDEFINED = 0,
+	MUSB_HOST,		/* A or Mini-A connector */
+	MUSB_PERIPHERAL,	/* B or Mini-B connector */
+	MUSB_OTG		/* Mini-AB connector */
+};
+
+struct clk;
+
+enum musb_fifo_style {
+	FIFO_RXTX,
+	FIFO_TX,
+	FIFO_RX
+} __attribute__ ((packed));
+
+enum musb_buf_mode {
+	BUF_SINGLE,
+	BUF_DOUBLE
+} __attribute__ ((packed));
+
+struct musb_fifo_cfg {
+	u8			hw_ep_num;
+	enum musb_fifo_style	style;
+	enum musb_buf_mode	mode;
+	u16			maxpacket;
+};
+
+#define MUSB_EP_FIFO(ep, st, m, pkt)		\
+{						\
+	.hw_ep_num	= ep,			\
+	.style		= st,			\
+	.mode		= m,			\
+	.maxpacket	= pkt,			\
+}
+
+#define MUSB_EP_FIFO_SINGLE(ep, st, pkt)	\
+	MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)
+
+#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt)	\
+	MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
+
+struct musb_hdrc_eps_bits {
+	const char	name[16];
+	u8		bits;
+};
+
+struct musb_hdrc_config {
+	struct musb_fifo_cfg	*fifo_cfg;	/* board fifo configuration */
+	unsigned		fifo_cfg_size;	/* size of the fifo configuration */
+
+	/* MUSB configuration-specific details */
+	unsigned	multipoint:1;	/* multipoint device */
+	unsigned	dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
+	unsigned	soft_con:1 __deprecated; /* soft connect required */
+	unsigned	utm_16:1 __deprecated; /* utm data witdh is 16 bits */
+	unsigned	big_endian:1;	/* true if CPU uses big-endian */
+	unsigned	mult_bulk_tx:1;	/* Tx ep required for multbulk pkts */
+	unsigned	mult_bulk_rx:1;	/* Rx ep required for multbulk pkts */
+	unsigned	high_iso_tx:1;	/* Tx ep required for HB iso */
+	unsigned	high_iso_rx:1;	/* Rx ep required for HD iso */
+	unsigned	dma:1 __deprecated; /* supports DMA */
+	unsigned	vendor_req:1 __deprecated; /* vendor registers required */
+
+	u8		num_eps;	/* number of endpoints _with_ ep0 */
+	u8		dma_channels __deprecated; /* number of dma channels */
+	u8		dyn_fifo_size;	/* dynamic size in bytes */
+	u8		vendor_ctrl __deprecated; /* vendor control reg width */
+	u8		vendor_stat __deprecated; /* vendor status reg witdh */
+	u8		dma_req_chan __deprecated; /* bitmask for required dma channels */
+	u8		ram_bits;	/* ram address size */
+
+	struct musb_hdrc_eps_bits *eps_bits __deprecated;
+#ifdef CONFIG_BLACKFIN
+	/* A GPIO controlling VRSEL in Blackfin */
+	unsigned int	gpio_vrsel;
+	unsigned int	gpio_vrsel_active;
+	/* musb CLKIN in Blackfin in MHZ */
+	unsigned char   clkin;
+#endif
+
+};
+
+struct musb_hdrc_platform_data {
+	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
+	u8		mode;
+
+	/* for clk_get() */
+	const char	*clock;
+
+	/* (HOST or OTG) switch VBUS on/off */
+	int		(*set_vbus)(struct device *dev, int is_on);
+
+	/* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
+	u8		power;
+
+	/* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
+	u8		min_power;
+
+	/* (HOST or OTG) msec/2 after VBUS on till power good */
+	u8		potpgt;
+
+	/* (HOST or OTG) program PHY for external Vbus */
+	unsigned	extvbus:1;
+
+	/* Power the device on or off */
+	int		(*set_power)(int state);
+
+	/* MUSB configuration-specific details */
+	struct musb_hdrc_config	*config;
+
+	/* Architecture specific board data	*/
+	void		*board_data;
+
+	/* Platform specific struct musb_ops pointer */
+	const void	*platform_ops;
+};
+
+
+/* TUSB 6010 support */
+
+#define	TUSB6010_OSCCLK_60	16667	/* psec/clk @ 60.0 MHz */
+#define	TUSB6010_REFCLK_24	41667	/* psec/clk @ 24.0 MHz XI */
+#define	TUSB6010_REFCLK_19	52083	/* psec/clk @ 19.2 MHz CLKIN */
+
+#ifdef	CONFIG_ARCH_OMAP2
+
+extern int __init tusb6010_setup_interface(
+		struct musb_hdrc_platform_data *data,
+		unsigned ps_refclk, unsigned waitpin,
+		unsigned async_cs, unsigned sync_cs,
+		unsigned irq, unsigned dmachan);
+
+extern int tusb6010_platform_retime(unsigned is_refclk);
+
+#endif	/* OMAP2 */
+
+/*
+ * U-Boot specfic stuff
+ */
+int musb_register(struct musb_hdrc_platform_data *plat, void *bdata,
+			void *ctl_regs);
+
+#endif /* __LINUX_USB_MUSB_H */
diff --git a/include/nand.h b/include/nand.h
index bbe28b2..dded4e2 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -139,6 +139,7 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 			u_char *buffer, int flags);
 int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts);
+int nand_torture(nand_info_t *nand, loff_t offset);
 
 #define NAND_LOCK_STATUS_TIGHT	0x01
 #define NAND_LOCK_STATUS_UNLOCK 0x04
diff --git a/include/nios2.h b/include/nios2.h
index df8126a..cbca0dc 100644
--- a/include/nios2.h
+++ b/include/nios2.h
@@ -24,8 +24,6 @@
 #ifndef __NIOS2_H__
 #define __NIOS2_H__
 
-#include <linux/stringify.h>
-
 /*------------------------------------------------------------------------
  * Control registers -- use with wrctl() & rdctl()
  *----------------------------------------------------------------------*/
@@ -39,14 +37,8 @@
  * Access to control regs
  *----------------------------------------------------------------------*/
 
-#define rdctl(reg)\
-	({unsigned int val;\
-	asm volatile("rdctl %0, ctl" __stringify(reg) \
-		: "=r" (val) ); val;})
-
-#define wrctl(reg,val)\
-	asm volatile( "wrctl ctl" _str_(reg) ",%0"\
-		: : "r" (val))
+#define rdctl(reg) __builtin_rdctl(reg)
+#define wrctl(reg, val) __builtin_wrctl(reg, val)
 
 /*------------------------------------------------------------------------
  * Control reg bit masks
diff --git a/include/pci.h b/include/pci.h
index eba122f..15f583f 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -67,7 +67,130 @@
 #define PCI_CLASS_PROG		0x09	/* Reg. Level Programming Interface */
 #define PCI_CLASS_DEVICE	0x0a	/* Device class */
 #define PCI_CLASS_CODE		0x0b	/* Device class code */
+#define  PCI_CLASS_CODE_TOO_OLD	0x00
+#define  PCI_CLASS_CODE_STORAGE 0x01
+#define  PCI_CLASS_CODE_NETWORK 0x02
+#define  PCI_CLASS_CODE_DISPLAY	0x03
+#define  PCI_CLASS_CODE_MULTIMEDIA 0x04
+#define  PCI_CLASS_CODE_MEMORY	0x05
+#define  PCI_CLASS_CODE_BRIDGE	0x06
+#define  PCI_CLASS_CODE_COMM	0x07
+#define  PCI_CLASS_CODE_PERIPHERAL 0x08
+#define  PCI_CLASS_CODE_INPUT	0x09
+#define  PCI_CLASS_CODE_DOCKING	0x0A
+#define  PCI_CLASS_CODE_PROCESSOR 0x0B
+#define  PCI_CLASS_CODE_SERIAL	0x0C
+#define  PCI_CLASS_CODE_WIRELESS 0x0D
+#define  PCI_CLASS_CODE_I2O	0x0E
+#define  PCI_CLASS_CODE_SATELLITE 0x0F
+#define  PCI_CLASS_CODE_CRYPTO	0x10
+#define  PCI_CLASS_CODE_DATA	0x11
+/* Base Class 0x12 - 0xFE is reserved */
+#define  PCI_CLASS_CODE_OTHER	0xFF
+
 #define PCI_CLASS_SUB_CODE	0x0a	/* Device sub-class code */
+#define  PCI_CLASS_SUB_CODE_TOO_OLD_NOTVGA	0x00
+#define  PCI_CLASS_SUB_CODE_TOO_OLD_VGA		0x01
+#define  PCI_CLASS_SUB_CODE_STORAGE_SCSI	0x00
+#define  PCI_CLASS_SUB_CODE_STORAGE_IDE		0x01
+#define  PCI_CLASS_SUB_CODE_STORAGE_FLOPPY	0x02
+#define  PCI_CLASS_SUB_CODE_STORAGE_IPIBUS	0x03
+#define  PCI_CLASS_SUB_CODE_STORAGE_RAID	0x04
+#define  PCI_CLASS_SUB_CODE_STORAGE_ATA		0x05
+#define  PCI_CLASS_SUB_CODE_STORAGE_SATA	0x06
+#define  PCI_CLASS_SUB_CODE_STORAGE_SAS		0x07
+#define  PCI_CLASS_SUB_CODE_STORAGE_OTHER	0x80
+#define  PCI_CLASS_SUB_CODE_NETWORK_ETHERNET	0x00
+#define  PCI_CLASS_SUB_CODE_NETWORK_TOKENRING	0x01
+#define  PCI_CLASS_SUB_CODE_NETWORK_FDDI	0x02
+#define  PCI_CLASS_SUB_CODE_NETWORK_ATM		0x03
+#define  PCI_CLASS_SUB_CODE_NETWORK_ISDN	0x04
+#define  PCI_CLASS_SUB_CODE_NETWORK_WORLDFIP	0x05
+#define  PCI_CLASS_SUB_CODE_NETWORK_PICMG	0x06
+#define  PCI_CLASS_SUB_CODE_NETWORK_OTHER	0x80
+#define  PCI_CLASS_SUB_CODE_DISPLAY_VGA		0x00
+#define  PCI_CLASS_SUB_CODE_DISPLAY_XGA		0x01
+#define  PCI_CLASS_SUB_CODE_DISPLAY_3D		0x02
+#define  PCI_CLASS_SUB_CODE_DISPLAY_OTHER	0x80
+#define  PCI_CLASS_SUB_CODE_MULTIMEDIA_VIDEO	0x00
+#define  PCI_CLASS_SUB_CODE_MULTIMEDIA_AUDIO	0x01
+#define  PCI_CLASS_SUB_CODE_MULTIMEDIA_PHONE	0x02
+#define  PCI_CLASS_SUB_CODE_MULTIMEDIA_OTHER	0x80
+#define  PCI_CLASS_SUB_CODE_MEMORY_RAM		0x00
+#define  PCI_CLASS_SUB_CODE_MEMORY_FLASH	0x01
+#define  PCI_CLASS_SUB_CODE_MEMORY_OTHER	0x80
+#define  PCI_CLASS_SUB_CODE_BRIDGE_HOST		0x00
+#define  PCI_CLASS_SUB_CODE_BRIDGE_ISA		0x01
+#define  PCI_CLASS_SUB_CODE_BRIDGE_EISA		0x02
+#define  PCI_CLASS_SUB_CODE_BRIDGE_MCA		0x03
+#define  PCI_CLASS_SUB_CODE_BRIDGE_PCI		0x04
+#define  PCI_CLASS_SUB_CODE_BRIDGE_PCMCIA	0x05
+#define  PCI_CLASS_SUB_CODE_BRIDGE_NUBUS	0x06
+#define  PCI_CLASS_SUB_CODE_BRIDGE_CARDBUS	0x07
+#define  PCI_CLASS_SUB_CODE_BRIDGE_RACEWAY	0x08
+#define  PCI_CLASS_SUB_CODE_BRIDGE_SEMI_PCI	0x09
+#define  PCI_CLASS_SUB_CODE_BRIDGE_INFINIBAND	0x0A
+#define  PCI_CLASS_SUB_CODE_BRIDGE_OTHER	0x80
+#define  PCI_CLASS_SUB_CODE_COMM_SERIAL		0x00
+#define  PCI_CLASS_SUB_CODE_COMM_PARALLEL	0x01
+#define  PCI_CLASS_SUB_CODE_COMM_MULTIPORT	0x02
+#define  PCI_CLASS_SUB_CODE_COMM_MODEM		0x03
+#define  PCI_CLASS_SUB_CODE_COMM_GPIB		0x04
+#define  PCI_CLASS_SUB_CODE_COMM_SMARTCARD	0x05
+#define  PCI_CLASS_SUB_CODE_COMM_OTHER		0x80
+#define  PCI_CLASS_SUB_CODE_PERIPHERAL_PIC	0x00
+#define  PCI_CLASS_SUB_CODE_PERIPHERAL_DMA	0x01
+#define  PCI_CLASS_SUB_CODE_PERIPHERAL_TIMER	0x02
+#define  PCI_CLASS_SUB_CODE_PERIPHERAL_RTC	0x03
+#define  PCI_CLASS_SUB_CODE_PERIPHERAL_HOTPLUG	0x04
+#define  PCI_CLASS_SUB_CODE_PERIPHERAL_SD	0x05
+#define  PCI_CLASS_SUB_CODE_PERIPHERAL_OTHER	0x80
+#define  PCI_CLASS_SUB_CODE_INPUT_KEYBOARD	0x00
+#define  PCI_CLASS_SUB_CODE_INPUT_DIGITIZER	0x01
+#define  PCI_CLASS_SUB_CODE_INPUT_MOUSE		0x02
+#define  PCI_CLASS_SUB_CODE_INPUT_SCANNER	0x03
+#define  PCI_CLASS_SUB_CODE_INPUT_GAMEPORT	0x04
+#define  PCI_CLASS_SUB_CODE_INPUT_OTHER		0x80
+#define  PCI_CLASS_SUB_CODE_DOCKING_GENERIC	0x00
+#define  PCI_CLASS_SUB_CODE_DOCKING_OTHER	0x80
+#define  PCI_CLASS_SUB_CODE_PROCESSOR_386	0x00
+#define  PCI_CLASS_SUB_CODE_PROCESSOR_486	0x01
+#define  PCI_CLASS_SUB_CODE_PROCESSOR_PENTIUM	0x02
+#define  PCI_CLASS_SUB_CODE_PROCESSOR_ALPHA	0x10
+#define  PCI_CLASS_SUB_CODE_PROCESSOR_POWERPC	0x20
+#define  PCI_CLASS_SUB_CODE_PROCESSOR_MIPS	0x30
+#define  PCI_CLASS_SUB_CODE_PROCESSOR_COPROC	0x40
+#define  PCI_CLASS_SUB_CODE_SERIAL_1394		0x00
+#define  PCI_CLASS_SUB_CODE_SERIAL_ACCESSBUS	0x01
+#define  PCI_CLASS_SUB_CODE_SERIAL_SSA		0x02
+#define  PCI_CLASS_SUB_CODE_SERIAL_USB		0x03
+#define  PCI_CLASS_SUB_CODE_SERIAL_FIBRECHAN	0x04
+#define  PCI_CLASS_SUB_CODE_SERIAL_SMBUS	0x05
+#define  PCI_CLASS_SUB_CODE_SERIAL_INFINIBAND	0x06
+#define  PCI_CLASS_SUB_CODE_SERIAL_IPMI		0x07
+#define  PCI_CLASS_SUB_CODE_SERIAL_SERCOS	0x08
+#define  PCI_CLASS_SUB_CODE_SERIAL_CANBUS	0x09
+#define  PCI_CLASS_SUB_CODE_WIRELESS_IRDA	0x00
+#define  PCI_CLASS_SUB_CODE_WIRELESS_IR		0x01
+#define  PCI_CLASS_SUB_CODE_WIRELESS_RF		0x10
+#define  PCI_CLASS_SUB_CODE_WIRELESS_BLUETOOTH	0x11
+#define  PCI_CLASS_SUB_CODE_WIRELESS_BROADBAND	0x12
+#define  PCI_CLASS_SUB_CODE_WIRELESS_80211A	0x20
+#define  PCI_CLASS_SUB_CODE_WIRELESS_80211B	0x21
+#define  PCI_CLASS_SUB_CODE_WIRELESS_OTHER	0x80
+#define  PCI_CLASS_SUB_CODE_I2O_V1_0		0x00
+#define  PCI_CLASS_SUB_CODE_SATELLITE_TV	0x01
+#define  PCI_CLASS_SUB_CODE_SATELLITE_AUDIO	0x02
+#define  PCI_CLASS_SUB_CODE_SATELLITE_VOICE	0x03
+#define  PCI_CLASS_SUB_CODE_SATELLITE_DATA	0x04
+#define  PCI_CLASS_SUB_CODE_CRYPTO_NETWORK	0x00
+#define  PCI_CLASS_SUB_CODE_CRYPTO_ENTERTAINMENT 0x10
+#define  PCI_CLASS_SUB_CODE_CRYPTO_OTHER	0x80
+#define  PCI_CLASS_SUB_CODE_DATA_DPIO		0x00
+#define  PCI_CLASS_SUB_CODE_DATA_PERFCNTR	0x01
+#define  PCI_CLASS_SUB_CODE_DATA_COMMSYNC	0x10
+#define  PCI_CLASS_SUB_CODE_DATA_MGMT		0x20
+#define  PCI_CLASS_SUB_CODE_DATA_OTHER		0x80
 
 #define PCI_CACHE_LINE_SIZE	0x0c	/* 8 bits */
 #define PCI_LATENCY_TIMER	0x0d	/* 8 bits */
diff --git a/include/physmem.h b/include/physmem.h
new file mode 100644
index 0000000..03d3a78
--- /dev/null
+++ b/include/physmem.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ */
+
+/*
+ * These functions work like memset but operate on physical memory which may
+ * not be accessible directly.
+ *
+ * @param s	The physical address to start setting memory at.
+ * @param c	The character to set each byte of the region to.
+ * @param n	The number of bytes to set.
+ *
+ * @return	The physical address of the memory which was set.
+ */
+phys_addr_t arch_phys_memset(phys_addr_t s, int c, phys_size_t n);
diff --git a/drivers/misc/pmic_max8997.c b/include/power/battery.h
index 62dbc05..e2fec68 100644
--- a/drivers/misc/pmic_max8997.c
+++ b/include/power/battery.h
@@ -21,23 +21,18 @@
  * MA 02111-1307 USA
  */
 
-#include <common.h>
-#include <pmic.h>
-#include <max8997_pmic.h>
+#ifndef __POWER_BATTERY_H_
+#define __POWER_BATTERY_H_
 
-int pmic_init(void)
-{
-	struct pmic *p = get_pmic();
-	static const char name[] = "MAX8997_PMIC";
+struct battery {
+	unsigned int version;
+	unsigned int state_of_chrg;
+	unsigned int time_to_empty;
+	unsigned int capacity;
+	unsigned int voltage_uV;
 
-	puts("Board PMIC init\n");
+	unsigned int state;
+};
 
-	p->name = name;
-	p->interface = PMIC_I2C;
-	p->number_of_regs = PMIC_NUM_OF_REGS;
-	p->hw.i2c.addr = MAX8997_I2C_ADDR;
-	p->hw.i2c.tx_num = 1;
-	p->bus = I2C_PMIC;
-
-	return 0;
-}
+int power_bat_init(unsigned char bus);
+#endif /* __POWER_BATTERY_H_ */
diff --git a/include/power/fg_battery_cell_params.h b/include/power/fg_battery_cell_params.h
new file mode 100644
index 0000000..7ddf6f2
--- /dev/null
+++ b/include/power/fg_battery_cell_params.h
@@ -0,0 +1,90 @@
+/*
+ *  Copyright (C) 2012 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FG_BATTERY_CELL_PARAMS_H_
+#define __FG_BATTERY_CELL_PARAMS_H_
+
+#if  defined(CONFIG_POWER_FG_MAX17042) && defined(CONFIG_TRATS)
+
+/* Cell characteristics - Exynos4 TRATS development board */
+/* Shall be written to addr 0x80h */
+u16 cell_character0[16] = {
+	0xA2A0,
+	0xB6E0,
+	0xB850,
+	0xBAD0,
+	0xBB20,
+	0xBB70,
+	0xBBC0,
+	0xBC20,
+	0xBC80,
+	0xBCE0,
+	0xBD80,
+	0xBE20,
+	0xC090,
+	0xC420,
+	0xC910,
+	0xD070
+};
+
+/* Shall be written to addr 0x90h */
+u16 cell_character1[16] = {
+	0x0090,
+	0x1A50,
+	0x02F0,
+	0x2060,
+	0x2060,
+	0x2E60,
+	0x26A0,
+	0x2DB0,
+	0x2DB0,
+	0x1870,
+	0x2A20,
+	0x16F0,
+	0x08F0,
+	0x0D40,
+	0x08C0,
+	0x08C0
+};
+
+/* Shall be written to addr 0xA0h */
+u16 cell_character2[16] = {
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100,
+	0x0100
+};
+#endif
+#endif /* __FG_BATTERY_CELL_PARAMS_H_ */
diff --git a/include/power/max17042_fg.h b/include/power/max17042_fg.h
new file mode 100644
index 0000000..1103a48
--- /dev/null
+++ b/include/power/max17042_fg.h
@@ -0,0 +1,74 @@
+/*
+ *  Copyright (C) 2012 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MAX17042_FG_H_
+#define __MAX17042_FG_H_
+
+/* MAX 17042 registers */
+enum {
+	MAX17042_STATUS         = 0x00,
+	MAX17042_SOCREP         = 0x06,
+	MAX17042_VCELL          = 0x09,
+	MAX17042_CURRENT        = 0x0A,
+	MAX17042_AVG_CURRENT	= 0x0B,
+	MAX17042_SOCMIX	= 0x0D,
+	MAX17042_SOCAV		= 0x0E,
+	MAX17042_DESIGN_CAP	= 0x18,
+	MAX17042_AVG_VCELL	= 0x19,
+	MAX17042_CONFIG	= 0x1D,
+	MAX17042_VERSION	= 0x21,
+	MAX17042_LEARNCFG       = 0x28,
+	MAX17042_FILTERCFG	= 0x29,
+	MAX17042_RELAXCFG	= 0x2A,
+	MAX17042_MISCCFG	= 0x2B,
+	MAX17042_CGAIN		= 0x2E,
+	MAX17042_COFF		= 0x2F,
+	MAX17042_RCOMP0	= 0x38,
+	MAX17042_TEMPCO	= 0x39,
+	MAX17042_FSTAT		= 0x3D,
+	MAX17042_MLOCKReg1	= 0x62,
+	MAX17042_MLOCKReg2	= 0x63,
+	MAX17042_MODEL1         = 0x80,
+	MAX17042_MODEL2         = 0x90,
+	MAX17042_MODEL3         = 0xA0,
+	MAX17042_VFOCV		= 0xFB,
+	MAX17042_VFSOC		= 0xFF,
+
+	FG_NUM_OF_REGS = 0x100,
+};
+
+#define RCOMP0			0x0060
+#define TempCo			0x1015
+
+
+#define MAX17042_POR (1 << 1)
+
+#define MODEL_UNLOCK1		0x0059
+#define MODEL_UNLOCK2		0x00c4
+#define MODEL_LOCK1		0x0000
+#define MODEL_LOCK2		0x0000
+
+#define MAX17042_I2C_ADDR	(0x6C >> 1)
+
+int power_fg_init(unsigned char bus);
+#endif /* __MAX17042_FG_H_ */
diff --git a/include/power/max8997_muic.h b/include/power/max8997_muic.h
new file mode 100644
index 0000000..0149c12
--- /dev/null
+++ b/include/power/max8997_muic.h
@@ -0,0 +1,61 @@
+/*
+ *  Copyright (C) 2012 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MAX8997_MUIC_H_
+#define __MAX8997_MUIC_H_
+
+#include <power/power_chrg.h>
+
+/* MAX8997_MUIC_STATUS2 */
+#define MAX8997_MUIC_CHG_NO	0x00
+#define MAX8997_MUIC_CHG_USB	0x01
+#define MAX8997_MUIC_CHG_USB_D	0x02
+#define MAX8997_MUIC_CHG_TA	0x03
+#define MAX8997_MUIC_CHG_TA_500 0x04
+#define MAX8997_MUIC_CHG_TA_1A	0x05
+#define MAX8997_MUIC_CHG_MASK	0x07
+
+/* MAX 8997 MUIC registers */
+enum {
+	MAX8997_MUIC_ID         = 0x00,
+	MAX8997_MUIC_INT1	= 0x01,
+	MAX8997_MUIC_INT2	= 0x02,
+	MAX8997_MUIC_INT3	= 0x03,
+	MAX8997_MUIC_STATUS1	= 0x04,
+	MAX8997_MUIC_STATUS2	= 0x05,
+	MAX8997_MUIC_STATUS3	= 0x06,
+	MAX8997_MUIC_INTMASK1	= 0x07,
+	MAX8997_MUIC_INTMASK2	= 0x08,
+	MAX8997_MUIC_INTMASK3	= 0x09,
+	MAX8997_MUIC_CDETCTRL	= 0x0A,
+	MAX8997_MUIC_CONTROL1	= 0x0C,
+	MAX8997_MUIC_CONTROL2	= 0x0D,
+	MAX8997_MUIC_CONTROL3	= 0x0E,
+
+	MUIC_NUM_OF_REGS = 0x0F,
+};
+
+#define MAX8997_MUIC_I2C_ADDR	(0x4A >> 1)
+
+int power_muic_init(unsigned int bus);
+#endif /* __MAX8997_MUIC_H_ */
diff --git a/include/max8997_pmic.h b/include/power/max8997_pmic.h
index 17ae24e..5d2d94d 100644
--- a/include/max8997_pmic.h
+++ b/include/power/max8997_pmic.h
@@ -111,7 +111,7 @@ enum {
 	MAX8997_REG_MBCCTRL6	= 0x55,
 	MAX8997_REG_OTPCGHCVS	= 0x56,
 
-	MAX8997_REG_SAFEOUTCTRL	= 0x5a,
+	MAX8997_REG_SAFEOUTCTRL = 0x5a,
 
 	MAX8997_REG_LBCNFG1	= 0x5e,
 	MAX8997_REG_LBCNFG2	= 0x5f,
@@ -171,9 +171,31 @@ enum {
 	PMIC_NUM_OF_REGS = 0x9b,
 };
 
+#define ACTDISSAFEO1 (1 << 4)
+#define ACTDISSAFEO2 (1 << 5)
 #define ENSAFEOUT1 (1 << 6)
 #define ENSAFEOUT2 (1 << 7)
 
+#define ENBUCK (1 << 0)
+#define ACTIVE_DISCHARGE (1 << 3)
+#define GNSLCT (1 << 2)
+#define LDO_ADE (1 << 1)
+#define SAFEOUT_4_85V 0x00
+#define SAFEOUT_4_90V 0x01
+#define SAFEOUT_4_95V 0x02
+#define SAFEOUT_3_30V 0x03
+
+/* Charger */
+enum {CHARGER_ENABLE, CHARGER_DISABLE};
+#define DETBAT                  (1 << 2)
+#define MBCICHFCSET             (1 << 4)
+#define MBCHOSTEN               (1 << 6)
+#define VCHGR_FC                (1 << 7)
+
+#define CHARGER_MIN_CURRENT 200
+#define CHARGER_MAX_CURRENT 950
+#define CHARGER_CURRENT_RESOLUTION 50
+
 #define MAX8997_I2C_ADDR        (0xCC >> 1)
 #define MAX8997_RTC_ADDR	(0x0C >> 1)
 #define MAX8997_MUIC_ADDR	(0x4A >> 1)
@@ -187,4 +209,6 @@ enum {
 	EN_LDO = (0x3 << 6),
 };
 
+#define MAX8997_LDO_MAX_VAL 0x3F
+unsigned char max8997_reg_ldo(int uV);
 #endif /* __MAX8997_PMIC_H_ */
diff --git a/include/max8998_pmic.h b/include/power/max8998_pmic.h
index 0e559f9..0e559f9 100644
--- a/include/max8998_pmic.h
+++ b/include/power/max8998_pmic.h
diff --git a/include/pmic.h b/include/power/pmic.h
index 6a05b40..1ecfc05 100644
--- a/include/pmic.h
+++ b/include/power/pmic.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2011 Samsung Electronics
+ *  Copyright (C) 2011-2012 Samsung Electronics
  *  Lukasz Majewski <l.majewski@samsung.com>
  *
  * See file CREDITS for list of people who contributed to this
@@ -24,9 +24,15 @@
 #ifndef __CORE_PMIC_H_
 #define __CORE_PMIC_H_
 
-enum { PMIC_I2C, PMIC_SPI, };
+#include <common.h>
+#include <linux/list.h>
+#include <i2c.h>
+#include <power/power_chrg.h>
+
+enum { PMIC_I2C, PMIC_SPI, PMIC_NONE};
 enum { I2C_PMIC, I2C_NUM, };
 enum { PMIC_READ, PMIC_WRITE, };
+enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, };
 
 struct p_i2c {
 	unsigned char addr;
@@ -43,21 +49,52 @@ struct p_spi {
 	u32 (*prepare_tx)(u32 reg, u32 *val, u32 write);
 };
 
+struct pmic;
+struct power_fg {
+	int (*fg_battery_check) (struct pmic *p, struct pmic *bat);
+	int (*fg_battery_update) (struct pmic *p, struct pmic *bat);
+};
+
+struct power_chrg {
+	int (*chrg_type) (struct pmic *p);
+	int (*chrg_bat_present) (struct pmic *p);
+	int (*chrg_state) (struct pmic *p, int state, int current);
+};
+
+struct power_battery {
+	struct battery *bat;
+	int (*battery_init) (struct pmic *bat, struct pmic *p1,
+			     struct pmic *p2, struct pmic *p3);
+	int (*battery_charge) (struct pmic *bat);
+	/* Keep info about power devices involved with battery operation */
+	struct pmic *chrg, *fg, *muic;
+};
+
 struct pmic {
 	const char *name;
 	unsigned char bus;
 	unsigned char interface;
-	unsigned char number_of_regs;
+	unsigned char sensor_byte_order;
+	unsigned int number_of_regs;
 	union hw {
 		struct p_i2c i2c;
 		struct p_spi spi;
 	} hw;
+
+	void (*low_power_mode) (void);
+	struct power_battery *pbat;
+	struct power_chrg *chrg;
+	struct power_fg *fg;
+
+	struct pmic *parent;
+	struct list_head list;
 };
 
-int pmic_init(void);
-int pmic_dialog_init(void);
-int check_reg(u32 reg);
-struct pmic *get_pmic(void);
+int pmic_init(unsigned char bus);
+int pmic_dialog_init(unsigned char bus);
+int check_reg(struct pmic *p, u32 reg);
+struct pmic *pmic_alloc(void);
+struct pmic *pmic_get(const char *s);
 int pmic_probe(struct pmic *p);
 int pmic_reg_read(struct pmic *p, u32 reg, u32 *val);
 int pmic_reg_write(struct pmic *p, u32 reg, u32 val);
diff --git a/include/power/power_chrg.h b/include/power/power_chrg.h
new file mode 100644
index 0000000..24c4cde
--- /dev/null
+++ b/include/power/power_chrg.h
@@ -0,0 +1,43 @@
+/*
+ *  Copyright (C) 2012 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __POWER_CHARGER_H_
+#define __POWER_CHARGER_H_
+
+/* Type of available chargers */
+enum {
+	CHARGER_NO = 0,
+	CHARGER_TA,
+	CHARGER_USB,
+	CHARGER_TA_500,
+	CHARGER_UNKNOWN,
+};
+
+enum {
+	UNKNOWN,
+	EXT_SOURCE,
+	CHARGE,
+	NORMAL,
+};
+
+#endif /* __POWER_CHARGER_H_ */
diff --git a/include/sdhci.h b/include/sdhci.h
index c44793d..cffbe53 100644
--- a/include/sdhci.h
+++ b/include/sdhci.h
@@ -225,6 +225,7 @@
 #define SDHCI_QUIRK_BROKEN_VOLTAGE	(1 << 4)
 #define SDHCI_QUIRK_NO_CD		(1 << 5)
 #define SDHCI_QUIRK_WAIT_SEND_CMD	(1 << 6)
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1 << 7)
 
 /* to make gcc happy */
 struct sdhci_host;
diff --git a/include/status_led.h b/include/status_led.h
index da9fae9..27e9127 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -273,9 +273,6 @@ void status_led_set  (int led, int state);
 #elif defined(CONFIG_STXXTC)
 /* XXX empty just to avoid the error */
 /************************************************************************/
-#elif defined(CONFIG_NIOS2)
-/* XXX empty just to avoid the error */
-/************************************************************************/
 #elif defined(CONFIG_V38B)
 
 # define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */
diff --git a/include/stdio_dev.h b/include/stdio_dev.h
index 23e0ee1..932d093 100644
--- a/include/stdio_dev.h
+++ b/include/stdio_dev.h
@@ -120,5 +120,8 @@ int	drv_nc_init (void);
 #ifdef CONFIG_JTAG_CONSOLE
 int drv_jtag_console_init (void);
 #endif
+#ifdef CONFIG_CBMEM_CONSOLE
+int cbmemc_init(void);
+#endif
 
 #endif
diff --git a/include/usb.h b/include/usb.h
index 9dd8791..8d8a2c9 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -27,7 +27,7 @@
 #define _USB_H_
 
 #include <usb_defs.h>
-#include <usbdescriptors.h>
+#include <linux/usb/ch9.h>
 
 /*
  * The EHCI spec says that we must align to at least 32 bytes.  However,
@@ -67,12 +67,6 @@ struct devrequest {
 	unsigned short	length;
 } __attribute__ ((packed));
 
-/* All standard descriptors have these 2 fields in common */
-struct usb_descriptor_header {
-	unsigned char	bLength;
-	unsigned char	bDescriptorType;
-} __attribute__ ((packed));
-
 /* Interface */
 struct usb_interface {
 	struct usb_interface_descriptor desc;
@@ -86,7 +80,7 @@ struct usb_interface {
 
 /* Configuration information.. */
 struct usb_config {
-	struct usb_configuration_descriptor desc;
+	struct usb_config_descriptor desc;
 
 	unsigned char	no_of_if;	/* number of interfaces */
 	struct usb_interface if_desc[USB_MAXINTERFACES];
@@ -153,7 +147,9 @@ struct usb_device {
 	defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
 	defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI) || \
 	defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
-	defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X)
+	defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X) || \
+	defined(CONFIG_USB_MUSB_DSPS) || defined(CONFIG_USB_MUSB_AM35X) || \
+	defined(CONFIG_USB_MUSB_OMAP2PLUS)
 
 int usb_lowlevel_init(int index, void **controller);
 int usb_lowlevel_stop(int index);
@@ -285,7 +281,6 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
  *  - device:		bits 8-14
  *  - endpoint:		bits 15-18
  *  - Data0/1:		bit 19
- *  - speed:		bit 26		(0 = Full, 1 = Low Speed, 2 = High)
  *  - pipe type:	bits 30-31	(00 = isochronous, 01 = interrupt,
  *					 10 = control, 11 = bulk)
  *
@@ -297,7 +292,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 /* Create various pipes... */
 #define create_pipe(dev,endpoint) \
 		(((dev)->devnum << 8) | ((endpoint) << 15) | \
-		((dev)->speed << 26) | (dev)->maxpacketsize)
+		(dev)->maxpacketsize)
 #define default_pipe(dev) ((dev)->speed << 26)
 
 #define usb_sndctrlpipe(dev, endpoint)	((PIPE_CONTROL << 30) | \
@@ -348,8 +343,6 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 #define usb_pipe_endpdev(pipe)	(((pipe) >> 8) & 0x7ff)
 #define usb_pipeendpoint(pipe)	(((pipe) >> 15) & 0xf)
 #define usb_pipedata(pipe)	(((pipe) >> 19) & 1)
-#define usb_pipespeed(pipe)	(((pipe) >> 26) & 3)
-#define usb_pipeslow(pipe)	(usb_pipespeed(pipe) == USB_SPEED_LOW)
 #define usb_pipetype(pipe)	(((pipe) >> 30) & 3)
 #define usb_pipeisoc(pipe)	(usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
 #define usb_pipeint(pipe)	(usb_pipetype((pipe)) == PIPE_INTERRUPT)
diff --git a/include/usb/s3c_udc.h b/include/usb/s3c_udc.h
index 6a8fd44..7114dae 100644
--- a/include/usb/s3c_udc.h
+++ b/include/usb/s3c_udc.h
@@ -24,7 +24,6 @@
 
 #include <asm/errno.h>
 #include <linux/usb/ch9.h>
-#include <usbdescriptors.h>
 #include <linux/usb/gadget.h>
 #include <linux/list.h>
 #include <usb/lin_gadget_compat.h>
diff --git a/include/usb_defs.h b/include/usb_defs.h
index 8032e57..9502544 100644
--- a/include/usb_defs.h
+++ b/include/usb_defs.h
@@ -80,12 +80,6 @@
 #define USB_DIR_OUT           0
 #define USB_DIR_IN            0x80
 
-/* USB device speeds */
-#define USB_SPEED_FULL		0x0	/* 12Mbps */
-#define USB_SPEED_LOW		0x1	/* 1.5Mbps */
-#define USB_SPEED_HIGH		0x2	/* 480Mbps */
-#define USB_SPEED_RESERVED	0x3
-
 /* Descriptor types */
 #define USB_DT_DEVICE        0x01
 #define USB_DT_CONFIG        0x02
diff --git a/include/video.h b/include/video.h
index 9519cea..f7e27f8 100644
--- a/include/video.h
+++ b/include/video.h
@@ -15,4 +15,52 @@ int	video_init	(void *videobase);
 void	video_putc	(const char c);
 void	video_puts	(const char *s);
 
+/**
+ * Display a BMP format bitmap on the screen
+ *
+ * @param bmp_image	Address of BMP image
+ * @param x		X position to draw image
+ * @param y		Y position to draw image
+ */
+int video_display_bitmap(ulong bmp_image, int x, int y);
+
+/**
+ * Get the width of the screen in pixels
+ *
+ * @return width of screen in pixels
+ */
+int video_get_pixel_width(void);
+
+/**
+ * Get the height of the screen in pixels
+ *
+ * @return height of screen in pixels
+ */
+int video_get_pixel_height(void);
+
+/**
+ * Get the number of text lines/rows on the screen
+ *
+ * @return number of rows
+ */
+int video_get_screen_rows(void);
+
+/**
+ * Get the number of text columns on the screen
+ *
+ * @return number of columns
+ */
+int video_get_screen_columns(void);
+
+/**
+ * Set the position of the text cursor
+ *
+ * @param col	Column to place cursor (0 = left side)
+ * @param row	Row to place cursor (0 = top line)
+ */
+void video_position_cursor(unsigned col, unsigned row);
+
+/* Clear the display */
+void video_clear(void);
+
 #endif
diff --git a/lib/Makefile b/lib/Makefile
index e44e045..f83f6e8 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -48,6 +48,7 @@ COBJS-$(CONFIG_LMB) += lmb.o
 COBJS-y += ldiv.o
 COBJS-$(CONFIG_MD5) += md5.o
 COBJS-y += net_utils.o
+COBJS-$(CONFIG_PHYSMEM) += physmem.o
 COBJS-y += qsort.o
 COBJS-$(CONFIG_SHA1) += sha1.o
 COBJS-$(CONFIG_SHA256) += sha256.o
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 23e0205..6dba438 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -54,28 +54,6 @@ const char *fdtdec_get_compatible(enum fdt_compat_id id)
 	return compat_names[id];
 }
 
-/**
- * Look in the FDT for an alias with the given name and return its node.
- *
- * @param blob	FDT blob
- * @param name	alias name to look up
- * @return node offset if found, or an error code < 0 otherwise
- */
-static int find_alias_node(const void *blob, const char *name)
-{
-	const char *path;
-	int alias_node;
-
-	debug("find_alias_node: %s\n", name);
-	alias_node = fdt_path_offset(blob, "/aliases");
-	if (alias_node < 0)
-		return alias_node;
-	path = fdt_getprop(blob, alias_node, name, NULL);
-	if (!path)
-		return -FDT_ERR_NOTFOUND;
-	return fdt_path_offset(blob, path);
-}
-
 fdt_addr_t fdtdec_get_addr(const void *blob, int node,
 		const char *prop_name)
 {
@@ -113,6 +91,19 @@ s32 fdtdec_get_int(const void *blob, int node, const char *prop_name,
 	return default_val;
 }
 
+uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name,
+		uint64_t default_val)
+{
+	const uint64_t *cell64;
+	int length;
+
+	cell64 = fdt_getprop(blob, node, prop_name, &length);
+	if (!cell64 || length < sizeof(*cell64))
+		return default_val;
+
+	return fdt64_to_cpu(*cell64);
+}
+
 int fdtdec_get_is_enabled(const void *blob, int node)
 {
 	const char *cell;
@@ -130,7 +121,7 @@ int fdtdec_get_is_enabled(const void *blob, int node)
 	return 1;
 }
 
-enum fdt_compat_id fd_dec_lookup(const void *blob, int node)
+enum fdt_compat_id fdtdec_lookup(const void *blob, int node)
 {
 	enum fdt_compat_id id;
 
@@ -173,7 +164,7 @@ int fdtdec_next_alias(const void *blob, const char *name,
 	/* snprintf() is not available */
 	assert(strlen(name) < MAX_STR_LEN);
 	sprintf(str, "%.*s%d", MAX_STR_LEN, name, *upto);
-	node = find_alias_node(blob, str);
+	node = fdt_path_offset(blob, str);
 	if (node < 0)
 		return node;
 	err = fdt_node_check_compatible(blob, node, compat_names[id]);
@@ -428,9 +419,8 @@ int fdtdec_get_bool(const void *blob, int node, const char *prop_name)
  * @return number of GPIOs read if ok, -FDT_ERR_BADLAYOUT if max_count would
  * be exceeded, or -FDT_ERR_NOTFOUND if the property is missing.
  */
-static int fdtdec_decode_gpios(const void *blob, int node,
-		const char *prop_name, struct fdt_gpio_state *gpio,
-		int max_count)
+int fdtdec_decode_gpios(const void *blob, int node, const char *prop_name,
+		struct fdt_gpio_state *gpio, int max_count)
 {
 	const struct fdt_property *prop;
 	const u32 *cell;
@@ -477,6 +467,26 @@ int fdtdec_decode_gpio(const void *blob, int node, const char *prop_name,
 	return err == 1 ? 0 : err;
 }
 
+int fdtdec_get_gpio(struct fdt_gpio_state *gpio)
+{
+	int val;
+
+	if (!fdt_gpio_isvalid(gpio))
+		return -1;
+
+	val = gpio_get_value(gpio->gpio);
+	return gpio->flags & FDT_GPIO_ACTIVE_LOW ? val ^ 1 : val;
+}
+
+int fdtdec_set_gpio(struct fdt_gpio_state *gpio, int val)
+{
+	if (!fdt_gpio_isvalid(gpio))
+		return -1;
+
+	val = gpio->flags & FDT_GPIO_ACTIVE_LOW ? val ^ 1 : val;
+	return gpio_set_value(gpio->gpio, val);
+}
+
 int fdtdec_setup_gpio(struct fdt_gpio_state *gpio)
 {
 	/*
@@ -514,3 +524,64 @@ const u8 *fdtdec_locate_byte_array(const void *blob, int node,
 		return NULL;
 	return cell;
 }
+
+int fdtdec_get_config_int(const void *blob, const char *prop_name,
+		int default_val)
+{
+	int config_node;
+
+	debug("%s: %s\n", __func__, prop_name);
+	config_node = fdt_path_offset(blob, "/config");
+	if (config_node < 0)
+		return default_val;
+	return fdtdec_get_int(blob, config_node, prop_name, default_val);
+}
+
+int fdtdec_get_config_bool(const void *blob, const char *prop_name)
+{
+	int config_node;
+	const void *prop;
+
+	debug("%s: %s\n", __func__, prop_name);
+	config_node = fdt_path_offset(blob, "/config");
+	if (config_node < 0)
+		return 0;
+	prop = fdt_get_property(blob, config_node, prop_name, NULL);
+
+	return prop != NULL;
+}
+
+char *fdtdec_get_config_string(const void *blob, const char *prop_name)
+{
+	const char *nodep;
+	int nodeoffset;
+	int len;
+
+	debug("%s: %s\n", __func__, prop_name);
+	nodeoffset = fdt_path_offset(blob, "/config");
+	if (nodeoffset < 0)
+		return NULL;
+
+	nodep = fdt_getprop(blob, nodeoffset, prop_name, &len);
+	if (!nodep)
+		return NULL;
+
+	return (char *)nodep;
+}
+
+int fdtdec_decode_region(const void *blob, int node,
+		const char *prop_name, void **ptrp, size_t *size)
+{
+	const fdt_addr_t *cell;
+	int len;
+
+	debug("%s: %s\n", __func__, prop_name);
+	cell = fdt_getprop(blob, node, prop_name, &len);
+	if (!cell || (len != sizeof(fdt_addr_t) * 2))
+		return -1;
+
+	*ptrp = (void *)fdt_addr_to_cpu(*cell);
+	*size = fdt_size_to_cpu(cell[1]);
+	debug("%s: size=%zx\n", __func__, *size);
+	return 0;
+}
diff --git a/lib/lzma/LzmaDec.c b/lib/lzma/LzmaDec.c
index f941da2..4f45f80 100644
--- a/lib/lzma/LzmaDec.c
+++ b/lib/lzma/LzmaDec.c
@@ -1,5 +1,5 @@
 /* LzmaDec.c -- LZMA Decoder
-2008-11-06 : Igor Pavlov : Public domain */
+2009-09-20 : Igor Pavlov : Public domain */
 
 #include <config.h>
 #include <common.h>
@@ -116,12 +116,6 @@
 StopCompilingDueBUG
 #endif
 
-static const Byte kLiteralNextStates[kNumStates * 2] =
-{
-  0, 0, 0, 0, 1, 2, 3,  4,  5,  6,  4,  5,
-  7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10
-};
-
 #define LZMA_DIC_MIN (1 << 12)
 
 /* First LZMA-symbol is always decoded.
@@ -180,6 +174,7 @@ static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte
 
       if (state < kNumLitStates)
       {
+        state -= (state < 4) ? state : 3;
         symbol = 1;
 
         WATCHDOG_RESET();
@@ -190,6 +185,7 @@ static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte
       {
         unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
         unsigned offs = 0x100;
+        state -= (state < 10) ? 3 : 6;
         symbol = 1;
 
         WATCHDOG_RESET();
@@ -207,9 +203,6 @@ static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte
       }
       dic[dicPos++] = (Byte)symbol;
       processedPos++;
-
-      state = kLiteralNextStates[state];
-      /* if (state < 4) state = 0; else if (state < 10) state -= 3; else state -= 6; */
       continue;
     }
     else
@@ -395,7 +388,6 @@ static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte
         else if (distance >= checkDicSize)
           return SZ_ERROR_DATA;
         state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
-        /* state = kLiteralNextStates[state]; */
       }
 
       len += kMatchMinLen;
diff --git a/lib/lzma/LzmaDec.h b/lib/lzma/LzmaDec.h
index 7fba87f..63aa505 100644
--- a/lib/lzma/LzmaDec.h
+++ b/lib/lzma/LzmaDec.h
@@ -1,8 +1,8 @@
 /* LzmaDec.h -- LZMA Decoder
-2008-10-04 : Igor Pavlov : Public domain */
+2009-02-07 : Igor Pavlov : Public domain */
 
-#ifndef __LZMADEC_H
-#define __LZMADEC_H
+#ifndef __LZMA_DEC_H
+#define __LZMA_DEC_H
 
 #include "Types.h"
 
diff --git a/lib/lzma/Types.h b/lib/lzma/Types.h
index 1af5cfc..8afcba5 100644
--- a/lib/lzma/Types.h
+++ b/lib/lzma/Types.h
@@ -1,5 +1,5 @@
 /* Types.h -- Basic types
-2008-11-23 : Igor Pavlov : Public domain */
+2010-10-09 : Igor Pavlov : Public domain */
 
 #ifndef __7Z_TYPES_H
 #define __7Z_TYPES_H
@@ -65,9 +65,11 @@ typedef unsigned long UInt64;
 #if defined(_MSC_VER) || defined(__BORLANDC__)
 typedef __int64 Int64;
 typedef unsigned __int64 UInt64;
+#define UINT64_CONST(n) n
 #else
 typedef long long int Int64;
 typedef unsigned long long int UInt64;
+#define UINT64_CONST(n) n ## ULL
 #endif
 
 #endif
@@ -92,13 +94,11 @@ typedef int Bool;
 #endif
 
 #define MY_CDECL __cdecl
-#define MY_STD_CALL __stdcall
-#define MY_FAST_CALL MY_NO_INLINE __fastcall
+#define MY_FAST_CALL __fastcall
 
 #else
 
 #define MY_CDECL
-#define MY_STD_CALL
 #define MY_FAST_CALL
 
 #endif
@@ -108,6 +108,16 @@ typedef int Bool;
 
 typedef struct
 {
+  Byte (*Read)(void *p); /* reads one byte, returns 0 in case of EOF or error */
+} IByteIn;
+
+typedef struct
+{
+  void (*Write)(void *p, Byte b);
+} IByteOut;
+
+typedef struct
+{
   SRes (*Read)(void *p, void *buf, size_t *size);
     /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
        (output(*size) < input(*size)) is allowed */
@@ -140,7 +150,7 @@ typedef struct
 
 typedef struct
 {
-  SRes (*Look)(void *p, void **buf, size_t *size);
+  SRes (*Look)(void *p, const void **buf, size_t *size);
     /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
        (output(*size) > input(*size)) is not allowed
        (output(*size) < input(*size)) is allowed */
@@ -205,4 +215,20 @@ typedef struct
 #define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
 #define IAlloc_Free(p, a) (p)->Free((p), a)
 
+#ifdef _WIN32
+
+#define CHAR_PATH_SEPARATOR '\\'
+#define WCHAR_PATH_SEPARATOR L'\\'
+#define STRING_PATH_SEPARATOR "\\"
+#define WSTRING_PATH_SEPARATOR L"\\"
+
+#else
+
+#define CHAR_PATH_SEPARATOR '/'
+#define WCHAR_PATH_SEPARATOR L'/'
+#define STRING_PATH_SEPARATOR "/"
+#define WSTRING_PATH_SEPARATOR L"/"
+
+#endif
+
 #endif
diff --git a/lib/lzma/history.txt b/lib/lzma/history.txt
index aadf825..443511b 100644
--- a/lib/lzma/history.txt
+++ b/lib/lzma/history.txt
@@ -1,6 +1,41 @@
 HISTORY of the LZMA SDK
 -----------------------
 
+9.18 beta      2010-11-02
+-------------------------
+- New small SFX module for installers (SfxSetup).
+
+
+9.12 beta      2010-03-24
+-------------------------
+- The BUG in LZMA SDK 9.* was fixed: LZMA2 codec didn't work,
+  if more than 10 threads were used (or more than 20 threads in some modes).
+
+
+9.11 beta      2010-03-15
+-------------------------
+- PPMd compression method support
+
+
+9.09           2009-12-12
+-------------------------
+- The bug was fixed:
+   Utf16_To_Utf8 funstions in UTFConvert.cpp and 7zMain.c
+   incorrectly converted surrogate characters (the code >= 0x10000) to UTF-8.
+- Some bugs were fixed
+
+
+9.06           2009-08-17
+-------------------------
+- Some changes in ANSI-C 7z Decoder interfaces.
+
+
+9.04           2009-05-30
+-------------------------
+- LZMA2 compression method support
+- xz format support
+
+
 4.65           2009-02-03
 -------------------------
 - Some minor fixes
diff --git a/lib/lzma/lzma.txt b/lib/lzma/lzma.txt
index aa20f9d..144cd9a 100644
--- a/lib/lzma/lzma.txt
+++ b/lib/lzma/lzma.txt
@@ -1,4 +1,4 @@
-LZMA SDK 4.65
+LZMA SDK 9.20
 -------------
 
 LZMA SDK provides the documentation, samples, header files, libraries,
@@ -20,6 +20,10 @@ LICENSE
 
 LZMA SDK is written and placed in the public domain by Igor Pavlov.
 
+Some code in LZMA SDK is based on public domain code from another developers:
+  1) PPMd var.H (2001): Dmitry Shkarin
+  2) SHA-256: Wei Dai (Crypto++ library)
+
 
 LZMA SDK Contents
 -----------------
@@ -33,7 +37,7 @@ LZMA SDK includes:
 UNIX/Linux version
 ------------------
 To compile C++ version of file->file LZMA encoding, go to directory
-C++/7zip/Compress/LZMA_Alone
+CPP/7zip/Bundles/LzmaCon
 and call make to recompile it:
   make -f makefile.gcc clean all
 
@@ -49,6 +53,7 @@ lzma.txt     - LZMA SDK description (this file)
 7zC.txt      - 7z ANSI-C Decoder description
 methods.txt  - Compression method IDs for .7z
 lzma.exe     - Compiled file->file LZMA encoder/decoder for Windows
+7zr.exe      - 7-Zip with 7z/lzma/xz support.
 history.txt  - history of the LZMA SDK
 
 
@@ -66,7 +71,7 @@ C/  - C files
         LzmaEnc.*  - LZMA encoding
         LzmaLib.*  - LZMA Library for DLL calling
         Types.h    - Basic types for another .c files
-	Threads.*  - The code for multithreading.
+        Threads.*  - The code for multithreading.
 
     LzmaLib  - LZMA Library (.DLL for Windows)
 
@@ -86,12 +91,6 @@ CPP/ -- CPP files
 
     Compress - files related to compression/decompression
 
-      Copy         - Copy coder
-      RangeCoder   - Range Coder (special code of compression/decompression)
-      LZMA         - LZMA compression/decompression on C++
-      LZMA_Alone   - file->file LZMA compression/decompression
-      Branch       - Filters for x86, IA-64, ARM, ARM-Thumb, PowerPC and SPARC code
-
     Archive - files related to archiving
 
       Common   - common files for archive handling
@@ -100,6 +99,7 @@ CPP/ -- CPP files
     Bundles    - Modules that are bundles of other modules
 
       Alone7z           - 7zr.exe: Standalone version of 7z.exe that supports only 7z/LZMA/BCJ/BCJ2
+      LzmaCon           - lzma.exe: LZMA compression/decompression
       Format7zR         - 7zr.dll: Reduced version of 7za.dll: extracting/compressing to 7z/LZMA/BCJ/BCJ2
       Format7zExtractR  - 7zxr.dll: Reduced version of 7zxa.dll: extracting from 7z/LZMA/BCJ/BCJ2.
 
@@ -369,8 +369,8 @@ Interface:
     propData - LZMA properties  (5 bytes)
     propSize - size of propData buffer (5 bytes)
     finishMode - It has meaning only if the decoding reaches output limit (*destLen).
-	 LZMA_FINISH_ANY - Decode just destLen bytes.
-	 LZMA_FINISH_END - Stream must be finished after (*destLen).
+         LZMA_FINISH_ANY - Decode just destLen bytes.
+         LZMA_FINISH_END - Stream must be finished after (*destLen).
                            You can use LZMA_FINISH_END, when you know that
                            current output buffer covers last bytes of stream.
     alloc    - Memory allocator.
@@ -431,7 +431,7 @@ Memory Requirements:
   {
     ...
     int res = LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
-	const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode);
+        const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode);
     ...
   }
 
@@ -527,7 +527,8 @@ static ISzAlloc g_Alloc = { SzAlloc, SzFree };
   LzmaEnc_Destroy(enc, &g_Alloc, &g_Alloc);
 
 
-If callback function return some error code, LzmaEnc_Encode also returns that code.
+If callback function return some error code, LzmaEnc_Encode also returns that code
+or it can return the code like SZ_ERROR_READ, SZ_ERROR_WRITE or SZ_ERROR_PROGRESS.
 
 
 Single-call RAM->RAM Compression
@@ -549,8 +550,8 @@ Return code:
 
 
 
-LZMA Defines
-------------
+Defines
+-------
 
 _LZMA_SIZE_OPT - Enable some optimizations in LZMA Decoder to get smaller executable code.
 
@@ -562,6 +563,9 @@ _LZMA_UINT32_IS_ULONG  - Define it if int is 16-bit on your compiler and long is
 _LZMA_NO_SYSTEM_SIZE_T  - Define it if you don't want to use size_t type.
 
 
+_7ZIP_PPMD_SUPPPORT - Define it if you don't want to support PPMD method in AMSI-C .7z decoder.
+
+
 C++ LZMA Encoder/Decoder
 ~~~~~~~~~~~~~~~~~~~~~~~~
 C++ LZMA code use COM-like interfaces. So if you want to use it,
diff --git a/lib/physmem.c b/lib/physmem.c
new file mode 100644
index 0000000..0f035ed
--- /dev/null
+++ b/lib/physmem.c
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ */
+
+#include <common.h>
+#include <physmem.h>
+
+static phys_addr_t __arch_phys_memset(phys_addr_t s, int c, phys_size_t n)
+{
+	void *s_ptr = (void *)(uintptr_t)s;
+
+	assert(((phys_addr_t)(uintptr_t)s) == s);
+	assert(((phys_addr_t)(uintptr_t)(s + n)) == s + n);
+	return (phys_addr_t)(uintptr_t)memset(s_ptr, c, n);
+}
+
+phys_addr_t arch_phys_memset(phys_addr_t s, int c, phys_size_t n)
+	__attribute__((weak, alias("__arch_phys_memset")));
diff --git a/nand_spl/board/freescale/mpc8536ds/Makefile b/nand_spl/board/freescale/mpc8536ds/Makefile
index e5388d8..9c77826 100644
--- a/nand_spl/board/freescale/mpc8536ds/Makefile
+++ b/nand_spl/board/freescale/mpc8536ds/Makefile
@@ -39,7 +39,7 @@ AFLAGS	+= -DCONFIG_NAND_SPL
 CFLAGS	+= -DCONFIG_NAND_SPL
 
 SOBJS	= start.o resetvec.o
-COBJS	= cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
+COBJS	= cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \
 	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
@@ -67,7 +67,8 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 # $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
 $(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
 $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
+		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
@@ -79,13 +80,13 @@ $(obj)cpu_init_early.c:
 	@rm -f $(obj)cpu_init_early.c
 	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
 
-$(obj)cpu_init_nand.c:
-	@rm -f $(obj)cpu_init_nand.c
-	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+$(obj)spl_minimal.c:
+	@rm -f $(obj)spl_minimal.c
+	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c
 
 $(obj)fsl_law.c:
 	@rm -f $(obj)fsl_law.c
-	ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
+	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
 
 $(obj)law.c:
 	@rm -f $(obj)law.c
diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile
index e5388d8..9c77826 100644
--- a/nand_spl/board/freescale/mpc8569mds/Makefile
+++ b/nand_spl/board/freescale/mpc8569mds/Makefile
@@ -39,7 +39,7 @@ AFLAGS	+= -DCONFIG_NAND_SPL
 CFLAGS	+= -DCONFIG_NAND_SPL
 
 SOBJS	= start.o resetvec.o
-COBJS	= cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
+COBJS	= cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \
 	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
@@ -67,7 +67,8 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 # $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
 $(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
 $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
+		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
@@ -79,13 +80,13 @@ $(obj)cpu_init_early.c:
 	@rm -f $(obj)cpu_init_early.c
 	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
 
-$(obj)cpu_init_nand.c:
-	@rm -f $(obj)cpu_init_nand.c
-	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+$(obj)spl_minimal.c:
+	@rm -f $(obj)spl_minimal.c
+	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c
 
 $(obj)fsl_law.c:
 	@rm -f $(obj)fsl_law.c
-	ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
+	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
 
 $(obj)law.c:
 	@rm -f $(obj)law.c
diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile
index e5388d8..9c77826 100644
--- a/nand_spl/board/freescale/mpc8572ds/Makefile
+++ b/nand_spl/board/freescale/mpc8572ds/Makefile
@@ -39,7 +39,7 @@ AFLAGS	+= -DCONFIG_NAND_SPL
 CFLAGS	+= -DCONFIG_NAND_SPL
 
 SOBJS	= start.o resetvec.o
-COBJS	= cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
+COBJS	= cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \
 	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
@@ -67,7 +67,8 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 # $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
 $(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
 $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
+		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
@@ -79,13 +80,13 @@ $(obj)cpu_init_early.c:
 	@rm -f $(obj)cpu_init_early.c
 	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
 
-$(obj)cpu_init_nand.c:
-	@rm -f $(obj)cpu_init_nand.c
-	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+$(obj)spl_minimal.c:
+	@rm -f $(obj)spl_minimal.c
+	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c
 
 $(obj)fsl_law.c:
 	@rm -f $(obj)fsl_law.c
-	ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
+	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
 
 $(obj)law.c:
 	@rm -f $(obj)law.c
diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile
index 43e72c4..f67ed09 100644
--- a/nand_spl/board/freescale/mx31pdk/Makefile
+++ b/nand_spl/board/freescale/mx31pdk/Makefile
@@ -42,7 +42,8 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot.lds
 # $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
 $(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
 $(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
+		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
 #########################################################################
 
diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile
index f270faa..c3495ec 100644
--- a/nand_spl/board/freescale/p1010rdb/Makefile
+++ b/nand_spl/board/freescale/p1010rdb/Makefile
@@ -39,9 +39,8 @@ AFLAGS	+= -DCONFIG_NAND_SPL
 CFLAGS	+= -DCONFIG_NAND_SPL
 
 SOBJS	= start.o resetvec.o ticks.o
-COBJS	= cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
-	  nand_boot.o nand_boot_fsl_ifc.o ns16550.o tlb.o tlb_table.o \
-	  ../common.o
+COBJS	= cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \
+	  nand_boot.o nand_boot_fsl_ifc.o ns16550.o tlb.o tlb_table.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -68,7 +67,8 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 # $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
 $(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
 $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)board/$(BOARDDIR) \
+		 -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
@@ -80,13 +80,13 @@ $(obj)cpu_init_early.c:
 	@rm -f $(obj)cpu_init_early.c
 	ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $(obj)cpu_init_early.c
 
-$(obj)cpu_init_nand.c:
-	@rm -f $(obj)cpu_init_nand.c
-	ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_nand.c $(obj)cpu_init_nand.c
+$(obj)spl_minimal.c:
+	@rm -f $(obj)spl_minimal.c
+	ln -sf $(SRCTREE)/$(CPUDIR)/spl_minimal.c $(obj)spl_minimal.c
 
 $(obj)fsl_law.c:
 	@rm -f $(obj)fsl_law.c
-	ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
+	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
 
 $(obj)law.c:
 	@rm -f $(obj)law.c
@@ -129,9 +129,6 @@ ifneq ($(OBJTREE), $(SRCTREE))
 $(obj)nand_boot.c:
 	@rm -f $(obj)nand_boot.c
 	ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
-$(obj)../common.c:
-	@rm -f $(obj)../common.c
-	ln -s $(SRCTREE)/nand_spl/board/freescale/common.c $(obj)../common.c
 endif
 
 #########################################################################
diff --git a/nand_spl/board/freescale/p1010rdb/nand_boot.c b/nand_spl/board/freescale/p1010rdb/nand_boot.c
index 9c35690..3c7bc2b 100644
--- a/nand_spl/board/freescale/p1010rdb/nand_boot.c
+++ b/nand_spl/board/freescale/p1010rdb/nand_boot.c
@@ -35,7 +35,7 @@ unsigned long ddr_freq_mhz;
 
 void sdram_init(void)
 {
-	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 	/* mask off E bit */
 	u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR));
 
diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile
index b288284..9b2c0d7 100644
--- a/nand_spl/board/freescale/p1023rds/Makefile
+++ b/nand_spl/board/freescale/p1023rds/Makefile
@@ -34,9 +34,8 @@ AFLAGS	+= -DCONFIG_NAND_SPL
 CFLAGS	+= -DCONFIG_NAND_SPL
 
 SOBJS	= start.o resetvec.o
-COBJS	= cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
-	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o \
-	  ../common.o
+COBJS	= cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \
+	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -63,7 +62,8 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 # $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
 $(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
 $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
+		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
@@ -75,13 +75,13 @@ $(obj)cpu_init_early.c:
 	@rm -f $(obj)cpu_init_early.c
 	ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $(obj)cpu_init_early.c
 
-$(obj)cpu_init_nand.c:
-	@rm -f $(obj)cpu_init_nand.c
-	ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_nand.c $(obj)cpu_init_nand.c
+$(obj)spl_minimal.c:
+	@rm -f $(obj)spl_minimal.c
+	ln -sf $(SRCTREE)/$(CPUDIR)/spl_minimal.c $(obj)spl_minimal.c
 
 $(obj)fsl_law.c:
 	@rm -f $(obj)fsl_law.c
-	ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
+	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
 
 $(obj)law.c:
 	@rm -f $(obj)law.c
@@ -120,9 +120,6 @@ ifneq ($(OBJTREE), $(SRCTREE))
 $(obj)nand_boot.c:
 	@rm -f $(obj)nand_boot.c
 	ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
-$(obj)../common.c:
-	@rm -f $(obj)../common.c
-	ln -s $(SRCTREE)/nand_spl/board/freescale/common.c $(obj)../common.c
 endif
 
 #########################################################################
diff --git a/nand_spl/board/freescale/p1023rds/nand_boot.c b/nand_spl/board/freescale/p1023rds/nand_boot.c
index 89e339d..d6756fb 100644
--- a/nand_spl/board/freescale/p1023rds/nand_boot.c
+++ b/nand_spl/board/freescale/p1023rds/nand_boot.c
@@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* Fixed sdram init -- doesn't use serial presence detect. */
 void sdram_init(void)
 {
-	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 
 	set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1);
 
diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile
index e5388d8..9c77826 100644
--- a/nand_spl/board/freescale/p1_p2_rdb/Makefile
+++ b/nand_spl/board/freescale/p1_p2_rdb/Makefile
@@ -39,7 +39,7 @@ AFLAGS	+= -DCONFIG_NAND_SPL
 CFLAGS	+= -DCONFIG_NAND_SPL
 
 SOBJS	= start.o resetvec.o
-COBJS	= cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
+COBJS	= cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \
 	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
@@ -67,7 +67,8 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
 # $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
 $(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
 $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
+		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
@@ -79,13 +80,13 @@ $(obj)cpu_init_early.c:
 	@rm -f $(obj)cpu_init_early.c
 	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
 
-$(obj)cpu_init_nand.c:
-	@rm -f $(obj)cpu_init_nand.c
-	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+$(obj)spl_minimal.c:
+	@rm -f $(obj)spl_minimal.c
+	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c
 
 $(obj)fsl_law.c:
 	@rm -f $(obj)fsl_law.c
-	ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
+	ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c
 
 $(obj)law.c:
 	@rm -f $(obj)law.c
diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
deleted file mode 100644
index 7146d16..0000000
--- a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
+++ /dev/null
@@ -1,146 +0,0 @@
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# Copyright 2011 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-NAND_SPL := y
-CONFIG_SYS_TEXT_BASE_SPL := 0xfff00000
-PAD_TO := 0xff801000
-
-include $(TOPDIR)/config.mk
-
-nandobj	:= $(OBJTREE)/nand_spl/
-
-LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
-LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
-		$(LDFLAGS) $(LDFLAGS_FINAL)
-AFLAGS	+= -DCONFIG_NAND_SPL
-CFLAGS	+= -DCONFIG_NAND_SPL
-
-SOBJS	= start.o resetvec.o
-COBJS	= cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
-	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o \
-	  ../common.o
-
-SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS	:= $(SOBJS) $(COBJS)
-LNDIR	:= $(nandobj)board/$(BOARDDIR)
-
-ALL	= $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all:	$(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
-	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
-
-$(nandobj)u-boot-spl.bin:	$(nandobj)u-boot-spl
-	$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot-nand_spl.lds
-	cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
-		-Map $(nandobj)u-boot-spl.map \
-		-o $(nandobj)u-boot-spl
-
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
-
-# create symbolic links for common files
-
-$(obj)cache.c:
-	@rm -f $(obj)cache.c
-	ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c
-
-$(obj)cpu_init_early.c:
-	@rm -f $(obj)cpu_init_early.c
-	ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $(obj)cpu_init_early.c
-
-$(obj)cpu_init_nand.c:
-	@rm -f $(obj)cpu_init_nand.c
-	ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_nand.c $(obj)cpu_init_nand.c
-
-$(obj)fsl_law.c:
-	@rm -f $(obj)fsl_law.c
-	ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
-
-$(obj)law.c:
-	@rm -f $(obj)law.c
-	ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
-
-$(obj)nand_boot_fsl_elbc.c:
-	@rm -f $(obj)nand_boot_fsl_elbc.c
-	ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
-	       $(obj)nand_boot_fsl_elbc.c
-
-$(obj)ns16550.c:
-	@rm -f $(obj)ns16550.c
-	ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
-
-$(obj)resetvec.S:
-	@rm -f $(obj)resetvec.S
-	ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S
-
-$(obj)fixed_ivor.S:
-	@rm -f $(obj)fixed_ivor.S
-	ln -sf $(SRCTREE)/$(CPUDIR)/fixed_ivor.S $(obj)fixed_ivor.S
-
-$(obj)start.S: $(obj)fixed_ivor.S
-	@rm -f $(obj)start.S
-	ln -sf $(SRCTREE)/$(CPUDIR)/start.S $(obj)start.S
-
-$(obj)tlb.c:
-	@rm -f $(obj)tlb.c
-	ln -sf $(SRCTREE)/$(CPUDIR)/tlb.c $(obj)tlb.c
-
-$(obj)tlb_table.c:
-	@rm -f $(obj)tlb_table.c
-	ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
-
-ifneq ($(OBJTREE), $(SRCTREE))
-$(obj)nand_boot.c:
-	@rm -f $(obj)nand_boot.c
-	ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
-$(obj)../common.c:
-	@rm -f $(obj)../common.c
-	ln -s $(SRCTREE)/nand_spl/board/freescale/common.c $(obj)../common.c
-endif
-
-#########################################################################
-
-$(obj)%.o:	$(obj)%.S
-	$(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o:	$(obj)%.c
-	$(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/nand_spl/board/karo/tx25/Makefile b/nand_spl/board/karo/tx25/Makefile
index becf7fa..b27189d 100644
--- a/nand_spl/board/karo/tx25/Makefile
+++ b/nand_spl/board/karo/tx25/Makefile
@@ -63,7 +63,8 @@ $(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot.lds
 # $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
 $(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
 $(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
+		-ansi -D__ASSEMBLY__ -P - <$< >$@
 
 #########################################################################
 
diff --git a/spl/Makefile b/spl/Makefile
index 6a79c3c..6dbb105 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -32,9 +32,30 @@ START_PATH := $(CPUDIR)
 endif
 
 START := $(START_PATH)/start.o
+ifeq ($(CPU),x86)
+START += $(START_PATH)/start16.o
+START += $(START_PATH)/resetvec.o
+endif
+ifeq ($(CPU),ppc4xx)
+START += $(START_PATH)/resetvec.o
+endif
+ifeq ($(CPU),mpc85xx)
+START += $(START_PATH)/resetvec.o
+endif
 
 LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
+
 LIBS-y += $(CPUDIR)/lib$(CPU).o
+ifeq ($(CPU),mpc83xx)
+LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
+endif
+ifeq ($(CPU),mpc85xx)
+LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
+endif
+ifeq ($(CPU),mpc86xx)
+LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
+endif
+
 ifdef SOC
 LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o
 endif
diff --git a/tools/patman/series.py b/tools/patman/series.py
index a283a2d..d2971f4 100644
--- a/tools/patman/series.py
+++ b/tools/patman/series.py
@@ -145,10 +145,11 @@ class Series(dict):
         Return:
             The change log as a list of strings, one per line
 
-            Changes in v2:
+            Changes in v4:
             - Jog the dial back closer to the widget
 
-            Changes in v1:
+            Changes in v3: None
+            Changes in v2:
             - Fix the widget
             - Jog the dial
 
@@ -162,12 +163,16 @@ class Series(dict):
                 if commit and this_commit != commit:
                     continue
                 out.append(text)
-            if out:
-                out = ['Changes in v%d:' % change] + out
-                if need_blank:
-                    out = [''] + out
-                final += out
-                need_blank = True
+            line = 'Changes in v%d:' % change
+            have_changes = len(out) > 0
+            if have_changes:
+                out.insert(0, line)
+            else:
+                out = [line + ' None']
+            if need_blank:
+                out.insert(0, '')
+            final += out
+            need_blank = have_changes
         if self.changes:
             final.append('')
         return final