board/p1010rdb: add pin mux and sdhc support in any boot

Since pins multiplexing, SDHC shares signals with IFC, with this patch:
To enable SDHC in case of NOR/NAND/SPI boot
   a) For temporary use case in runtime without reboot system
      run 'mux sdhc' in u-boot to validate SDHC with invalidating IFC.
   b) For long-term use case
      set 'esdhc' in hwconfig and save it.
To enable IFC in case of SD boot
   a) For temporary use case in runtime without reboot system
      run 'mux ifc' in u-boot to validate IFC with invalidating SDHC.
   b) For long-term use case
      set 'ifc' in hwconfig and save it.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>

4 files changed, 107 insertions, 33 deletions

diff --git a/board/freescale/p1010rdb/law.c b/board/freescale/p1010rdb/law.c
index 0045127..ed41a05 100644
--- a/board/freescale/p1010rdb/law.c
+++ b/board/freescale/p1010rdb/law.c
@@ -9,11 +9,9 @@
 #include <asm/mmu.h>
 
 struct law_entry law_table[] = {
-#ifndef CONFIG_SDCARD
 	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_IFC),
 	SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
 	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
-#endif
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index 42153e6..ae8ba45 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -21,10 +21,8 @@
 #include <asm/fsl_serdes.h>
 #include <asm/fsl_ifc.h>
 #include <asm/fsl_pci.h>
-
-#ifndef CONFIG_SDCARD
 #include <hwconfig.h>
-#endif
+#include <i2c.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -33,8 +31,17 @@ DECLARE_GLOBAL_DATA_PTR;
 #define MUX_CPLD_TDM			0x01
 #define MUX_CPLD_SPICS0_FLASH		0x00
 #define MUX_CPLD_SPICS0_SLIC		0x02
+#define PMUXCR1_IFC_MASK       0x00ffff00
+#define PMUXCR1_SDHC_MASK      0x00fff000
+#define PMUXCR1_SDHC_ENABLE    0x00555000
+
+enum {
+	MUX_TYPE_IFC,
+	MUX_TYPE_SDHC,
+};
+
+static uint sd_ifc_mux;
 
-#ifndef CONFIG_SDCARD
 struct cpld_data {
 	u8 cpld_ver; /* cpld revision */
 	u8 pcba_ver; /* pcb revision number */
@@ -52,17 +59,14 @@ struct cpld_data {
 	u8 por2; /* POR Options */
 	u8 por3; /* POR Options */
 };
-#endif
 
 int board_early_init_f(void)
 {
 	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-#ifndef CONFIG_SDCARD
 	struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
 
 	/* Clock configuration to access CPLD using IFC(GPCM) */
 	setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
-#endif
 	/*
 	* Reset PCIe slots via GPIO4
 	*/
@@ -74,7 +78,6 @@ int board_early_init_f(void)
 
 int board_early_init_r(void)
 {
-#ifndef CONFIG_SDCARD
 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
 	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
 
@@ -98,7 +101,6 @@ int board_early_init_r(void)
 			CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, flash_esel+1, BOOKE_PAGESZ_16M, 1);
-#endif
 	return 0;
 }
 
@@ -109,6 +111,38 @@ void pci_init_board(void)
 }
 #endif /* ifdef CONFIG_PCI */
 
+int config_board_mux(int ctrl_type)
+{
+	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u8 tmp;
+
+	switch (ctrl_type) {
+	case MUX_TYPE_IFC:
+		i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+		tmp = 0xf0;
+		i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
+		tmp = 0x01;
+		i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
+		sd_ifc_mux = MUX_TYPE_IFC;
+		clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
+		break;
+	case MUX_TYPE_SDHC:
+		i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+		tmp = 0xf0;
+		i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
+		tmp = 0x05;
+		i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
+		sd_ifc_mux = MUX_TYPE_SDHC;
+		clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
+				PMUXCR1_SDHC_ENABLE);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 int checkboard(void)
 {
 	struct cpu_type *cpu;
@@ -116,6 +150,11 @@ int checkboard(void)
 	cpu = gd->arch.cpu;
 	printf("Board: %sRDB\n", cpu->name);
 
+#ifdef CONFIG_SDCARD
+	/* switch to IFC to read info from CPLD */
+	config_board_mux(MUX_TYPE_IFC);
+#endif
+
 	return 0;
 }
 
@@ -211,6 +250,16 @@ void fdt_del_sdhc(void *blob)
 	}
 }
 
+void fdt_del_ifc(void *blob)
+{
+	int nodeoff = 0;
+
+	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+				"fsl,ifc")) >= 0) {
+		fdt_del_node(blob, nodeoff);
+	}
+}
+
 void fdt_disable_uart1(void *blob)
 {
 	int nodeoff;
@@ -254,9 +303,13 @@ void ft_board_setup(void *blob, bd_t *bd)
 		fdt_del_flexcan(blob);
 		fdt_del_node_and_alias(blob, "ethernet2");
 	}
-#ifndef CONFIG_SDCARD
-	/* disable sdhc due to sdhc bug */
-	fdt_del_sdhc(blob);
+
+	/* Delete IFC node as IFC pins are multiplexing with SDHC */
+	if (sd_ifc_mux != MUX_TYPE_IFC)
+		fdt_del_ifc(blob);
+	else
+		fdt_del_sdhc(blob);
+
 	if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
 		fdt_del_tdm(blob);
 		fdt_del_spi_slic(blob);
@@ -274,11 +327,25 @@ void ft_board_setup(void *blob, bd_t *bd)
 		fdt_del_flexcan(blob);
 		fdt_disable_uart1(blob);
 	}
+}
 #endif
+
+#ifdef CONFIG_SDCARD
+int board_mmc_init(bd_t *bis)
+{
+	config_board_mux(MUX_TYPE_SDHC);
+		return -1;
+}
+#else
+void board_reset(void)
+{
+	/* mux to IFC to enable CPLD for reset */
+	if (sd_ifc_mux != MUX_TYPE_IFC)
+		config_board_mux(MUX_TYPE_IFC);
 }
 #endif
 
-#ifndef CONFIG_SDCARD
+
 int misc_init_r(void)
 {
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
@@ -304,6 +371,30 @@ int misc_init_r(void)
 		out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
 	}
 
+	if (hwconfig("esdhc"))
+		config_board_mux(MUX_TYPE_SDHC);
+	else if (hwconfig("ifc"))
+		config_board_mux(MUX_TYPE_IFC);
+
 	return 0;
 }
-#endif
+
+static int pin_mux_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+				char * const argv[])
+{
+	if (argc < 2)
+		return CMD_RET_USAGE;
+	if (strcmp(argv[1], "ifc") == 0)
+		config_board_mux(MUX_TYPE_IFC);
+	else if (strcmp(argv[1], "sdhc") == 0)
+		config_board_mux(MUX_TYPE_SDHC);
+	else
+		return CMD_RET_USAGE;
+	return 0;
+}
+
+U_BOOT_CMD(
+	mux, 2, 0, pin_mux_cmd,
+	"configure multiplexing pin for IFC/SDHC bus in runtime",
+	"bus_type (e.g. mux sdhc)"
+);
diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c
index 77a8043..a7af0f6 100644
--- a/board/freescale/p1010rdb/tlb.c
+++ b/board/freescale/p1010rdb/tlb.c
@@ -42,7 +42,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			0, 1, BOOKE_PAGESZ_1M, 1),
 
 #ifndef CONFIG_SPL_BUILD
-#ifndef CONFIG_SDCARD
 	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
 			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
 			0, 2, BOOKE_PAGESZ_16M, 1),
@@ -51,7 +50,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
 			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
 			0, 3, BOOKE_PAGESZ_16M, 1),
-#endif
 
 #ifdef CONFIG_PCI
 	/* *I*G* - PCI */
@@ -66,7 +64,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 #endif
 #endif
 
-#ifndef CONFIG_SDCARD
 	/* *I*G - Board CPLD  */
 	SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
 			MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
@@ -75,7 +72,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 7, BOOKE_PAGESZ_1M, 1),
-#endif
 
 #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index c058613..032c078 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -152,10 +152,7 @@
 #define CONFIG_DDR_CLK_FREQ	66666666 /* DDRCLK on P1010 RDB */
 #define CONFIG_SYS_CLK_FREQ	66666666 /* SYSCLK for P1010 RDB */
 
-#ifndef CONFIG_SDCARD
 #define CONFIG_MISC_INIT_R
-#endif
-
 #define CONFIG_HWCONFIG
 /*
  * These can be toggled for performance analysis, otherwise use default.
@@ -256,10 +253,6 @@ extern unsigned long get_sdram_size(void);
  * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
  */
 
-/* In case of SD card boot, IFC interface is not available because of muxing */
-#ifdef CONFIG_SDCARD
-#define CONFIG_SYS_NO_FLASH
-#else
 /*
  * IFC Definitions
  */
@@ -410,7 +403,6 @@ extern unsigned long get_sdram_size(void);
 					FTIM2_GPCM_TCH(0x0) | \
 					FTIM2_GPCM_TWP(0x1f))
 #define CONFIG_SYS_CS3_FTIM3		0x0
-#endif	/* CONFIG_SDCARD */
 
 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_SYS_RAMBOOT
@@ -482,6 +474,8 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_FSL_I2C2_SPEED	400000
 #define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
 #define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define I2C_PCA9557_ADDR1		0x18
+#define I2C_PCA9557_BUS_NUM		0
 
 /* I2C EEPROM */
 #undef CONFIG_ID_EEPROM
@@ -567,12 +561,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_LBA48
 #endif /* #ifdef CONFIG_FSL_SATA  */
 
-/*  SD interface will only be available in case of SD boot */
-#ifdef CONFIG_SDCARD
 #define CONFIG_MMC
-#define CONFIG_DEF_HWCONFIG		esdhc
-#endif
-
 #ifdef CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_DOS_PARTITION