* Patch by Yuli Barcohen, 09 Jun 2004:

  Add support for Analogue&Micro Adder87x and the older AdderII board.

* Patch by Ming-Len Wu, 09 Jun 2004:
  Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board

25 files changed, 3723 insertions, 26 deletions

diff --git a/CHANGELOG b/CHANGELOG
index a74b79d..aa5893d 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,12 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Patch by Yuli Barcohen, 09 Jun 2004:
+  Add support for Analogue&Micro Adder87x and the older AdderII board.
+
+* Patch by Ming-Len Wu, 09 Jun 2004:
+  Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
+
 * Patch by Sam Song, 09 Jun 2004:
   - Add support for RPXlite_DW board
   - Update FLASH driver for 4*AM29DL323DB90VI
diff --git a/CREDITS b/CREDITS
index b077a29..8f0057c 100644
--- a/CREDITS
+++ b/CREDITS
@@ -39,6 +39,7 @@ E: yuli@arabellasw.com
 D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards.
 D: Support for Zephyr Engineering ZPC.1900 board.
 D: Support for Interphase iSPAN boards.
+D: Support for Analogue&Micro Adder boards.
 W: http://www.arabellasw.com
 
 N: Jerry van Baren
@@ -307,6 +308,10 @@ N: Erwin Rol
 E: erwin@muffin.org
 D: boot support for RTEMS
 
+N: Paul Ruhland
+E: pruhland@rochester.rr.com
+D: Port to Logic Zoom LH7A40x SDK board(s)
+
 N: Neil Russell
 E: caret@c-side.com
 D: Author of LiMon-1.4.2, which contributed some ideas
@@ -347,13 +352,22 @@ N: David Updegraff
 E: dave@cray.com
 D: Port to Cray L1 board; DHCP vendor extensions
 
+N: Christian Vejlbo
+E: christian.vejlbo@tellabs.com
+D: FADS860T ethernet support
+
 N: Martin Winistoerfer
 E: martinwinistoerfer@gmx.ch
 D: Port to MPC555/556 microcontrollers and support for cmi board
 
-N: Christian Vejlbo
-E: christian.vejlbo@tellabs.com
-D: FADS860T ethernet support
+N: Ming-Len Wu
+E: minglen_wu@techware.com.tw
+D: Motorola MX1ADS board support 
+W: http://www.techware.com.tw/
+
+N: Xianghua Xiao
+E: x.xiao@motorola.com
+D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards.
 
 N: John Zhan
 E: zhanz@sinovee.com
@@ -363,11 +377,3 @@ N: Alex Zuepke
 E: azu@sysgo.de
 D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
 W: www.elinos.com
-
-N: Xianghua Xiao
-E: x.xiao@motorola.com
-D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards.
-
-N: Paul Ruhland
-E: pruhland@rochester.rr.com
-D: Port to Logic Zoom LH7A40x SDK board(s)
diff --git a/MAINTAINERS b/MAINTAINERS
index 58d99b8..4c8bb2a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -27,6 +27,7 @@ Pantelis Antoniou <panto@intracom.gr>
 
 Yuli Barcohen <yuli@arabellasw.com>
 
+	Adder			MPC87x/MPC852T
 	ISPAN			MPC8260
 	MPC8260ADS		MPC826x/MPC827x/MPC8280
 	ZPC1900			MPC8265
diff --git a/MAKEALL b/MAKEALL
index 4d9b900..d2fe82e 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -33,6 +33,7 @@ LIST_5xxx="	\
 #########################################################################
 
 LIST_8xx="	\
+	Adder		GENIETV		MBX860T		RBC823		\
 	AdderII		GTH		MHPC		rmu		\
 	ADS860		hermes		MPC86xADS	RPXClassic	\
 	AMX860		IAD210		MPC885ADS	RPXlite		\
@@ -49,7 +50,6 @@ LIST_8xx="	\
 	FPS850L		LANTEC		QS850		TQM855L		\
 	GEN860T		lwmon		QS860T		TQM860L		\
 	GEN860T_SC	MBX		R360MPI		v37		\
-	GENIETV		MBX860T		RBC823				\
 "
 
 #########################################################################
@@ -139,10 +139,10 @@ LIST_ARM7="B2 ep7312 impa7"
 
 LIST_ARM9="	\
 	at91rm9200dk	integratorcp	integratorap			\
-	lpd7a400	omap1510inn	omap1610h2			\
-	omap1610inn	omap730p2	smdk2400			\
-	smdk2410	trab		VCMA9				\
-	versatile							\
+	lpd7a400	mx1ads		omap1510inn			\
+	omap1610h2	omap1610inn	omap730p2			\
+	smdk2400	smdk2410	trab				\
+	VCMA9		versatile					\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 32bd06b..457832e 100644
--- a/Makefile
+++ b/Makefile
@@ -262,6 +262,14 @@ PM520_config:	unconfig
 ## MPC8xx Systems
 #########################################################################
 
+Adder_config    \
+Adder87x_config \
+Adder852_config \
+	:		unconfig
+	$(if $(findstring 852,$@), \
+	@echo "#define CONFIG_MPC852T" > include/config.h)
+	@./mkconfig -a Adder ppc mpc8xx adder
+
 AdderII_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx adderII
 
@@ -1048,17 +1056,14 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$
 
 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
 
-SX1_config :		unconfig
-	@./mkconfig $(@:_config=) arm arm925t sx1
-
 integratorcp_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm926ejs integratorcp
 
 integratorap_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm926ejs integratorap
 
-versatile_config :	unconfig
-	@./mkconfig $(@:_config=) arm arm926ejs versatile
+lpd7a400_config:	unconfig
+	@./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
 
 omap1510inn_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm925t omap1510inn
@@ -1104,6 +1109,12 @@ smdk2400_config	:	unconfig
 smdk2410_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t smdk2410
 
+SX1_config :		unconfig
+	@./mkconfig $(@:_config=) arm arm925t sx1
+
+mx1ads_config	:	unconfig
+	@./mkconfig $(@:_config=) arm mc9328 mx1ads
+
 # TRAB default configuration:	8 MB Flash, 32 MB RAM
 trab_config \
 trab_bigram_config \
@@ -1132,8 +1143,8 @@ trab_old_config:	unconfig
 VCMA9_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t vcma9 mpl
 
-lpd7a400_config:	unconfig
-	@./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
+versatile_config :	unconfig
+	@./mkconfig $(@:_config=) arm arm926ejs versatile
 
 #########################################################################
 ## S3C44B0 Systems
@@ -1143,15 +1154,22 @@ B2_config	:	unconfig
 	@./mkconfig $(@:_config=) arm s3c44b0 B2 dave
 
 #########################################################################
-## ARM720T Systems
+## MC9328 (Dragonball) Systems
 #########################################################################
 
-impa7_config	:	unconfig
-	@./mkconfig $(@:_config=) arm arm720t impa7
+mx1ads_config	:	unconfig
+	@./mkconfig $(@:_config=) arm mc9328 mx1ads
+
+#########################################################################
+## ARM720T Systems
+#########################################################################
 
 ep7312_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm720t ep7312
 
+impa7_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm720t impa7
+
 modnet50_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm720t modnet50
 
diff --git a/board/adder/Makefile b/board/adder/Makefile
new file mode 100644
index 0000000..9123a80
--- /dev/null
+++ b/board/adder/Makefile
@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2004 Arabella Software Ltd.
+# Yuli Barcohen <yuli@arabellasw.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/adder/adder.c b/board/adder/adder.c
new file mode 100644
index 0000000..cab6e2f
--- /dev/null
+++ b/board/adder/adder.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2004 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * Support for Analogue&Micro Adder boards family.
+ * Tested on AdderII and Adder87x.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/*
+ * SDRAM is single Samsung K4S643232F-T70 chip.
+ * Minimal CPU frequency is 40MHz.
+ */
+static uint sdram_table[] = {
+	/* Single read	(offset 0x00 in UPM RAM) */
+	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00,
+	0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04,
+
+	/* Burst read	(offset 0x08 in UPM RAM) */
+	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00,
+	0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44,
+	0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35,
+	0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35,
+
+	/* Single write (offset 0x18 in UPM RAM) */
+	0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47,
+	0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* Burst write	(offset 0x20 in UPM RAM) */
+	0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+	0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* Refresh	(offset 0x30 in UPM RAM) */
+	0x1ff5fca4, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* Exception	(offset 0x3C in UPM RAM) */
+	0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04
+};
+
+long int initdram (int board_type)
+{
+	long int msize = CFG_SDRAM_SIZE;
+	volatile immap_t     *immap  = (volatile immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
+
+	/* Configure SDRAM refresh */
+	memctl->memc_mptpr = MPTPR_PTP_DIV32; /* BRGCLK/32 */
+
+	memctl->memc_mamr = (94 << 24) | CFG_MAMR;
+	memctl->memc_mar  = 0x0;
+	udelay(200);
+
+	/* Run precharge from location 0x15 */
+	memctl->memc_mcr = 0x80002115;
+	udelay(200);
+
+	/* Run 8 refresh cycles */
+	memctl->memc_mcr = 0x80002830;
+	udelay(200);
+
+	memctl->memc_mar = 0x88;
+	udelay(200);
+
+	/* Run MRS pattern from location 0x16 */
+	memctl->memc_mcr = 0x80002116;
+	udelay(200);
+
+	return msize;
+}
+
+int checkboard( void )
+{
+	puts("Board: Adder");
+#if defined(CONFIG_MPC885_FAMILY)
+	puts("87x\n");
+#elif defined(CONFIG_MPC866_FAMILY)
+	puts("II\n");
+#endif
+
+	return 0;
+}
diff --git a/board/adder/config.mk b/board/adder/config.mk
new file mode 100644
index 0000000..4691a69
--- /dev/null
+++ b/board/adder/config.mk
@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2004 Arabella Software Ltd.
+# Yuli Barcohen <yuli@arabellasw.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Analogue&Micro Adder boards family
+#
+TEXT_BASE = 0xFE000000
diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds
new file mode 100644
index 0000000..1d2a7d7
--- /dev/null
+++ b/board/adder/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Modified by Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp        : { *(.interp)		}
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt           : { *(.plt)		}
+  .text          :
+  {
+    cpu/mpc8xx/start.o	(.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile
new file mode 100644
index 0000000..8a17702
--- /dev/null
+++ b/board/mx1ads/Makefile
@@ -0,0 +1,50 @@
+#/*
+#* board/mx1ads/Makefile
+#* 
+#* (c) Copyright 2004
+#* Techware Information Technology, Inc.
+#* http://www.techware.com.tw/
+#*
+#* Ming-Len Wu <minglen_wu@techware.com.tw>
+#*
+#* This program is free software; you can redistribute it and/or
+#* modify it under the terms of the GNU General Public License as
+#* published by the Free Software Foundation; either version 2 of
+#* the License, or (at your option) any later version.
+#*
+#* This program is distributed in the hope that it will be useful,
+#* but WITHOUT ANY WARRANTY; without even the implied warranty of
+#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#* GNU General Public License for more details.
+#*
+#* You should have received a copy of the GNU General Public License
+#* along with this program; if not, write to the Free Software
+#* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+#* MA 02111-1307 USA
+#*/
+
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= mx1ads.o syncflash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/mx1ads/config.mk b/board/mx1ads/config.mk
new file mode 100644
index 0000000..16a0b84
--- /dev/null
+++ b/board/mx1ads/config.mk
@@ -0,0 +1,28 @@
+#/*
+#* board/mx1ads/config.mk
+#* 
+#* (c) Copyright 2004
+#* Techware Information Technology, Inc.
+#* http://www.techware.com.tw/
+#*
+#* Ming-Len Wu <minglen_wu@techware.com.tw>
+#*
+#* This program is free software; you can redistribute it and/or
+#* modify it under the terms of the GNU General Public License as
+#* published by the Free Software Foundation; either version 2 of
+#* the License, or (at your option) any later version.
+#*
+#* This program is distributed in the hope that it will be useful,
+#* but WITHOUT ANY WARRANTY; without even the implied warranty of
+#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#* GNU General Public License for more details.
+#*
+#* You should have received a copy of the GNU General Public License
+#* along with this program; if not, write to the Free Software
+#* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+#* MA 02111-1307 USA
+#*/
+
+
+TEXT_BASE = 0x08400000
+
diff --git a/board/mx1ads/memsetup.S b/board/mx1ads/memsetup.S
new file mode 100644
index 0000000..39b71fe
--- /dev/null
+++ b/board/mx1ads/memsetup.S
@@ -0,0 +1,82 @@
+/*
+ * board/mx1ads/memsetup.S
+ * 
+ * (c) Copyright 2004
+ * Techware Information Technology, Inc.
+ * http://www.techware.com.tw/
+ *
+ * Ming-Len Wu <minglen_wu@techware.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+#define SDCTL0			0x221000
+#define SDCTL1			0x221004
+
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl memsetup
+memsetup:
+/* memory controller init	 	*/
+
+	ldr  r1, =SDCTL0
+
+/*  Set Precharge Command		*/
+
+	ldr  r3, =0x92120200
+/*	ldr  r3, =0x92120251
+*/
+	str  r3, [r1]
+
+/* Issue Precharge All Commad		*/
+	ldr  r3, =0x8200000
+	ldr  r2, [r3]
+                                                                                                                                     
+/* Set AutoRefresh Command 		*/
+	ldr  r3, =0xA2120200
+	str  r3, [r1]
+
+/* Issue AutoRefresh Command		*/
+	ldr  r3, =0x8000000
+	ldr  r2, [r3]
+	ldr  r2, [r3]
+	ldr  r2, [r3]
+	ldr  r2, [r3]
+	ldr  r2, [r3]
+	ldr  r2, [r3]
+	ldr  r2, [r3]
+	ldr  r2, [r3]
+                                                                                                                                     
+/* Set Mode Register 			*/
+	ldr  r3, =0xB2120200
+	str  r3, [r1]
+                                                                                                                                     
+/* Issue Mode Register Command		*/
+	ldr  r3, =0x08111800 	/* Mode Register Value 		*/
+	ldr  r2, [r3]
+
+/* Set Normal Mode			*/
+	ldr  r3, =0x82124200
+	str  r3, [r1]
+
+/* everything is fine now 		*/
+	mov	pc, lr
+
diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
new file mode 100644
index 0000000..567f88a
--- /dev/null
+++ b/board/mx1ads/mx1ads.c
@@ -0,0 +1,183 @@
+/*
+ * board/mx1ads/mx1ads.c
+ * 
+ * (c) Copyright 2004
+ * Techware Information Technology, Inc.
+ * http://www.techware.com.tw/
+ *
+ * Ming-Len Wu <minglen_wu@techware.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <mc9328.h>
+
+/* ------------------------------------------------------------------------- */
+
+#define FCLK_SPEED 1
+
+#if FCLK_SPEED==0		/* Fout = 203MHz, Fin = 12MHz for Audio */
+#define M_MDIV	0xC3
+#define M_PDIV	0x4
+#define M_SDIV	0x1
+#elif FCLK_SPEED==1		/* Fout = 202.8MHz */
+#define M_MDIV	0xA1
+#define M_PDIV	0x3
+#define M_SDIV	0x1
+#endif
+
+#define USB_CLOCK 1
+
+#if USB_CLOCK==0
+#define U_M_MDIV	0xA1
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x1
+#elif USB_CLOCK==1
+#define U_M_MDIV	0x48
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x2
+#endif
+
+#if 0
+
+static inline void delay (unsigned long loops) {
+	__asm__ volatile ("1:\n"
+	  "subs %0, %1, #1\n"
+	  "bne 1b":"=r" (loops):"0" (loops));
+}
+
+#endif 
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+
+void SetAsynchMode(void) {
+	__asm__ (
+		"mrc p15,0,r0,c1,c0,0 \n"
+		"mov r2, #0xC0000000 \n"
+		"orr r0,r2,r0 \n"
+		"mcr p15,0,r0,c1,c0,0 \n"
+	);
+}
+                                                
+static u32 mc9328sid;
+
+int board_init (void) {
+
+	DECLARE_GLOBAL_DATA_PTR;
+
+	volatile unsigned int  tmp;
+
+	mc9328sid	= MX1_SIDR;
+
+	MX1_GPCR 	= 0x000003AB;		/* I/O pad driving strength 	*/
+	
+/*	MX1_CS1U 	= 0x00000A00;	*/	/* SRAM initialization 		*/
+/*	MX1_CS1L 	= 0x11110601; 	*/
+                        
+
+	MX1_MPCTL0 	= 0x04632410;	/* setting for 150 MHz MCU PLL CLK	*/
+
+/*	MX1_MPCTL0 	= 0x003f1437;	*//* setting for 192 MHz MCU PLL CLK	*/
+
+
+
+/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
+ * BCLK divider to 2 (i.e. BCLK to 48 MHz)
+ */
+	MX1_CSCR 	= 0xAF000403;
+
+	MX1_CSCR 	|= 0x00200000;   	/* Trigger the restart bit(bit 21)	*/
+	MX1_CSCR 	&= 0xFFFF7FFF;		/* Program PRESC bit(bit 15) to 0 to divide-by-1 */
+
+/* setup cs4 for cs8900 ethernet */
+	
+	MX1_CS4U	= 0x00000F00;	/* Initialize CS4 for CS8900 ethernet 	*/
+	MX1_CS4L	= 0x00001501;
+    
+	MX1_GIUS_A	&= 0xFF3FFFFF;
+	MX1_GPR_A	&= 0xFF3FFFFF;
+        
+	tmp = *(unsigned int *)(0x1500000C);
+	tmp = *(unsigned int *)(0x1500000C);
+
+/* setup timer 1 as system timer  	*/
+
+	MX1_TPRER1	= 0x1f;		/* divide by 32 		*/
+	MX1_TCTL1	= 0x19;		/* clock in from 32k Osc.	*/
+
+
+	SetAsynchMode();
+
+	gd->bd->bi_arch_number = 160;	/* Arch number of MX1ADS Board 		*/
+
+	gd->bd->bi_boot_params = 0x08000100;	/* adress of boot parameters	*/
+
+	icache_enable();
+	dcache_enable();
+
+/* set PERCLKs				*/
+	MX1_PCDR = 0x00000055;     	/* set PERCLKS				*/
+	
+/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes 
+ * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place       
+ * all sources selected as normal interrupt
+ */
+	MX1_INTTYPEH = 0;
+	MX1_INTTYPEL = 0;
+
+	return 0;
+}
+
+
+int board_late_init(void) {
+
+	setenv("stdout", "serial");
+	setenv("stderr", "serial");
+
+	switch	(mc9328sid) {
+		case 0x0005901d :
+			printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",mc9328sid); 
+			break;
+		case 0x04d4c01d :
+			printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",mc9328sid); 
+			break;
+		case 0x00d4c01d :
+			printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",mc9328sid); 
+			break;
+
+		default :
+			printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid); 
+			break;
+		
+	}
+	
+	return 0;
+} 
+                        
+
+int dram_init (void) {
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c
new file mode 100644
index 0000000..afbe786
--- /dev/null
+++ b/board/mx1ads/syncflash.c
@@ -0,0 +1,334 @@
+/*
+ * board/mx1ads/syncflash.c
+ * 
+ * (c) Copyright 2004
+ * Techware Information Technology, Inc.
+ * http://www.techware.com.tw/
+ *
+ * Ming-Len Wu <minglen_wu@techware.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mc9328.h>
+
+typedef unsigned long * p_u32;
+
+/* 4Mx16x2 IAM=0 CSD1 */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+
+/*  Following Setting is for CSD1	*/
+#define SFCTL			0x00221004
+#define reg_SFCTL		__REG(SFCTL)
+
+#define SYNCFLASH_A10		(0x00100000)
+
+#define CMD_NORMAL		(0x81020300)			/* Normal Mode			*/
+#define CMD_PREC		(CMD_NORMAL + 0x10000000) 	/* Precharge Command		*/
+#define CMD_AUTO		(CMD_NORMAL + 0x20000000) 	/* Auto Refresh Command		*/
+#define CMD_LMR			(CMD_NORMAL + 0x30000000) 	/* Load Mode Register Command 	*/
+#define CMD_LCR			(CMD_NORMAL + 0x60000000) 	/* LCR Command			*/
+#define CMD_PROGRAM		(CMD_NORMAL + 0x70000000)
+
+#define MODE_REG_VAL		(CFG_FLASH_BASE+0x0008CC00) 	/* Cas Latency 3		*/
+
+/* LCR Command */
+#define LCR_READSTATUS		(0x0001C000)			/* 0x70				*/
+#define LCR_ERASE_CONFIRM	(0x00008000)			/* 0x20				*/
+#define LCR_ERASE_NVMODE	(0x0000C000)			/* 0x30				*/
+#define LCR_PROG_NVMODE		(0x00028000)			/* 0xA0				*/
+#define LCR_SR_CLEAR		(0x00014000)			/* 0x50				*/
+
+
+/* Get Status register 			*/
+u32 SF_SR(void) {
+	u32 tmp,tmp1;
+
+	reg_SFCTL	= CMD_PROGRAM;
+	tmp 		= __REG(CFG_FLASH_BASE);
+	
+	reg_SFCTL	= CMD_NORMAL;
+
+	reg_SFCTL	= CMD_LCR;			/* Activate LCR Mode 		*/
+	tmp1 		= __REG(CFG_FLASH_BASE + LCR_SR_CLEAR);
+
+	return tmp;
+}
+
+/* check if SyncFlash is ready 		*/
+u8 SF_Ready(void) {
+	u32 tmp;
+
+	tmp	= SF_SR();
+
+	if ((tmp & 0x00800000) && (tmp & 0x001C0000)) {
+		printf ("SyncFlash Error code %08x\n",tmp);
+	};
+
+	if ((tmp & 0x00000080) && (tmp & 0x0000001C)) {
+		printf ("SyncFlash Error code %08x\n",tmp);
+
+	};
+
+	if (tmp == 0x00800080) 		/* Test Bit 7 of SR	*/
+		return 1;
+	else
+		return 0;
+}
+
+/* Issue the precharge all command 		*/
+void SF_PrechargeAll(void) {
+
+	u32 tmp;
+
+	reg_SFCTL	= CMD_PREC;			/* Set Precharge Command 	*/
+	tmp 		= __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */ 
+
+}
+
+/* set SyncFlash to normal mode			*/
+void SF_Normal(void) {
+
+	SF_PrechargeAll();
+	
+	reg_SFCTL	= CMD_NORMAL;
+}
+
+/* Erase SyncFlash 				*/
+void SF_Erase(u32 RowAddress) {
+	u32 tmp;
+
+	reg_SFCTL	= CMD_NORMAL;
+	tmp 		= __REG(RowAddress);
+
+	reg_SFCTL	= CMD_PREC;
+	tmp 		= __REG(RowAddress);
+	
+	reg_SFCTL 	= CMD_LCR;			/* Set LCR mode 		*/
+	__REG(RowAddress + LCR_ERASE_CONFIRM)	= 0;	/* Issue Erase Setup Command 	*/
+		
+	reg_SFCTL	= CMD_NORMAL;			/* return to Normal mode 	*/
+	__REG(RowAddress)	= 0xD0D0D0D0; 		/* Confirm			*/
+
+	while(!SF_Ready());
+}
+
+
+void SF_NvmodeErase(void) {
+	SF_PrechargeAll();
+
+	reg_SFCTL	= CMD_LCR;			/* Set to LCR mode		*/
+	__REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE)  = 0;	/* Issue Erase Nvmode Reg Command */
+	
+	reg_SFCTL	= CMD_NORMAL;			/* Return to Normal mode 	*/
+	__REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0;	/* Confirm 		*/
+
+	while(!SF_Ready());
+}
+
+void SF_NvmodeWrite(void) {
+	SF_PrechargeAll();
+
+	reg_SFCTL 	= CMD_LCR;			/* Set to LCR mode 		*/
+	__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0;	/* Issue Program Nvmode reg command */
+	
+	reg_SFCTL	= CMD_NORMAL;			/* Return to Normal mode 	*/
+	__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; 	/* Confirm not needed 	*/
+
+}
+
+
+/****************************************************************************************/
+
+ulong flash_init(void) {
+	int i, j;
+	u32 tmp;
+
+/* Turn on CSD1 for negating RESETSF of SyncFLash */
+
+	reg_SFCTL 	|= 0x80000000;		/* enable CSD1 for SyncFlash 		*/
+	udelay(200);
+
+	reg_SFCTL 	= CMD_LMR;		/* Set Load Mode Register Command 	*/
+	tmp 		= __REG(MODE_REG_VAL);	/* Issue Load Mode Register Command 	*/
+
+	SF_Normal();
+ 
+	i = 0;
+
+	flash_info[i].flash_id 	=  FLASH_MAN_MT | FLASH_MT28S4M16LC;
+		
+	flash_info[i].size 	= FLASH_BANK_SIZE;
+	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+
+	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+
+	for (j = 0; j < flash_info[i].sector_count; j++) {
+		flash_info[i].start[j] = CFG_FLASH_BASE + j * 0x00100000;
+	}
+	
+	flash_protect(FLAG_PROTECT_SET,
+		CFG_FLASH_BASE,
+		CFG_FLASH_BASE + monitor_flash_len - 1,
+		&flash_info[0]);
+
+	flash_protect(FLAG_PROTECT_SET,
+		CFG_ENV_ADDR,
+		CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		&flash_info[0]);
+
+	return FLASH_BANK_SIZE;
+}
+
+
+void flash_print_info (flash_info_t *info) {
+
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+		case (FLASH_MAN_MT & FLASH_VENDMASK):
+			printf("Micron: ");
+			break;
+		default:
+			printf("Unknown Vendor ");
+			break;
+	}
+	
+	
+	switch (info->flash_id & FLASH_TYPEMASK) {
+		case (FLASH_MT28S4M16LC & FLASH_TYPEMASK):
+			printf("2x FLASH_MT28S4M16LC (16MB Total)\n");
+			break;
+		default:
+			printf("Unknown Chip Type\n");
+			return;
+			break;
+	}
+
+	printf("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf("  Sector Start Addresses: ");
+
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 5) == 0) 
+			printf ("\n   ");
+
+		printf (" %08lX%s", info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+	
+	printf ("\n");
+}
+
+
+/*-----------------------------------------------------------------------*/
+
+int flash_erase (flash_info_t *info, int s_first, int s_last) {
+	int iflag, cflag, prot, sect;
+	int rc = ERR_OK;
+
+/* first look for protection bits */
+
+	if (info->flash_id == FLASH_UNKNOWN)
+		return ERR_UNKNOWN_FLASH_TYPE;
+
+	if ((s_first < 0) || (s_first > s_last)) 
+		return ERR_INVAL;
+
+	if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK)) 
+		return ERR_UNKNOWN_FLASH_VENDOR;
+
+	prot = 0;
+
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) 
+			prot++;
+	}
+	
+	if (prot) {
+		printf("protected!\n");
+		return ERR_PROTECTED;
+	}
+/*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+
+	cflag = icache_status();
+	icache_disable();
+	iflag = disable_interrupts();
+
+/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last && !ctrlc(); sect++) {
+	
+		printf("Erasing sector %2d ... ", sect);
+
+/* arm simple, non interrupt dependent timer */
+
+		reset_timer_masked();
+
+		SF_NvmodeErase();
+		SF_NvmodeWrite();
+
+		SF_Erase(CFG_FLASH_BASE + (0x0100000 * sect));
+		SF_Normal();
+
+		printf("ok.\n");
+	}
+
+	if (ctrlc())
+		printf("User Interrupt!\n");
+
+	if (iflag)
+		enable_interrupts();
+
+	if (cflag)
+		icache_enable();
+
+	return rc;
+}
+
+
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
+	int i;
+
+	for(i = 0; i < cnt; i += 4) { 
+
+		SF_PrechargeAll();
+
+		reg_SFCTL	= CMD_PROGRAM;		/* Enter SyncFlash Program mode */
+		__REG(addr + i) = __REG((u32)src  + i);
+
+		while(!SF_Ready());
+	}
+
+	SF_Normal();
+	
+	return ERR_OK;
+}
+
+
diff --git a/board/mx1ads/u-boot.lds b/board/mx1ads/u-boot.lds
new file mode 100644
index 0000000..946994d
--- /dev/null
+++ b/board/mx1ads/u-boot.lds
@@ -0,0 +1,58 @@
+/*
+ * board/mx1ads/u-boot.lds
+ * 
+ * (c) Copyright 2004
+ * Techware Information Technology, Inc.
+ * http://www.techware.com.tw/
+ *
+ * Ming-Len Wu <minglen_wu@techware.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/mc9328/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/cpu/mc9328/Makefile b/cpu/mc9328/Makefile
new file mode 100644
index 0000000..0261ba6
--- /dev/null
+++ b/cpu/mc9328/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(CPU).a
+
+START	= start.o
+OBJS	= serial.o interrupts.o cpu.o 
+
+all:	.depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(START:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/mc9328/config.mk b/cpu/mc9328/config.mk
new file mode 100644
index 0000000..cef7d26
--- /dev/null
+++ b/cpu/mc9328/config.mk
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
+	-mshort-load-bytes -msoft-float
+
+PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4
diff --git a/cpu/mc9328/cpu.c b/cpu/mc9328/cpu.c
new file mode 100644
index 0000000..2a2b578
--- /dev/null
+++ b/cpu/mc9328/cpu.c
@@ -0,0 +1,183 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <arm920t.h>
+
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1 (void)
+{
+	unsigned long value;
+
+	__asm__ __volatile__(
+		"mrc     p15, 0, %0, c1, c0, 0   @ read control reg\n"
+		: "=r" (value)
+		:
+		: "memory");
+
+#ifdef MMU_DEBUG
+	printf ("p15/c1 is = %08lx\n", value);
+#endif
+	return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1 (unsigned long value)
+{
+#ifdef MMU_DEBUG
+	printf ("write %08lx to p15/c1\n", value);
+#endif
+	__asm__ __volatile__(
+		"mcr     p15, 0, %0, c1, c0, 0   @ write it back\n"
+		:
+		: "r" (value)
+		: "memory");
+
+	read_p15_c1 ();
+}
+
+static void cp_delay (void)
+{
+	volatile int i;
+
+	/* copro seems to need some delay between reading and writing */
+	for (i = 0; i < 100; i++);
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU		(1<<0)		/* mmu off/on */
+#define C1_ALIGN	(1<<1)		/* alignment faults off/on */
+#define C1_DC		(1<<2)		/* dcache off/on */
+#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
+#define C1_SYS_PROT	(1<<8)		/* system protection */
+#define C1_ROM_PROT	(1<<9)		/* ROM protection */
+#define C1_IC		(1<<12)		/* icache off/on */
+#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
+#define RESERVED_1	(0xf << 3)	/* must be 111b for R/W */
+
+int cpu_init (void)
+{
+	/*
+	 * setup up stacks if necessary
+	 */
+#ifdef CONFIG_USE_IRQ
+	DECLARE_GLOBAL_DATA_PTR;
+
+	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
+#endif
+	return 0;
+}
+
+int cleanup_before_linux (void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * we turn off caches etc ...
+	 */
+
+	unsigned long i;
+
+	disable_interrupts ();
+
+	/* turn off I/D-cache */
+	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+	i &= ~(C1_DC | C1_IC);
+	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+	/* flush I/D-cache */
+	i = 0;
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+	return (0);
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	extern void reset_cpu (ulong addr);
+
+	disable_interrupts ();
+	reset_cpu (0);
+	/*NOTREACHED*/
+	return (0);
+}
+
+void icache_enable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg | C1_IC);
+}
+
+void icache_disable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg & ~C1_IC);
+}
+
+int icache_status (void)
+{
+	return (read_p15_c1 () & C1_IC) != 0;
+}
+
+#ifdef USE_920T_MMU
+/* It makes no sense to use the dcache if the MMU is not enabled */
+void dcache_enable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg | C1_DC);
+}
+
+void dcache_disable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	reg &= ~C1_DC;
+	write_p15_c1 (reg);
+}
+
+int dcache_status (void)
+{
+	return (read_p15_c1 () & C1_DC) != 0;
+}
+#endif
diff --git a/cpu/mc9328/interrupts.c b/cpu/mc9328/interrupts.c
new file mode 100644
index 0000000..3a922cf
--- /dev/null
+++ b/cpu/mc9328/interrupts.c
@@ -0,0 +1,250 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <arm920t.h>
+#include <mc9328.h>
+
+#include <asm/proc-armv/ptrace.h>
+
+extern void reset_cpu(ulong addr);
+int timer_load_val = 0;
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ interrupts */
+void enable_interrupts (void)
+{
+	unsigned long temp;
+	__asm__ __volatile__("mrs %0, cpsr\n"
+			     "bic %0, %0, #0x80\n"
+			     "msr cpsr_c, %0"
+			     : "=r" (temp)
+			     :
+			     : "memory");
+}
+
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+	unsigned long old,temp;
+	__asm__ __volatile__("mrs %0, cpsr\n"
+			     "orr %1, %0, #0xc0\n"
+			     "msr cpsr_c, %1"
+			     : "=r" (old), "=r" (temp)
+			     :
+			     : "memory");
+	return (old & 0x80) == 0;
+}
+#else
+void enable_interrupts (void)
+{
+	return;
+}
+int disable_interrupts (void)
+{
+	return 0;
+}
+#endif
+
+
+void bad_mode (void)
+{
+	panic ("Resetting CPU ...\n");
+	reset_cpu (0);
+}
+
+void show_regs (struct pt_regs *regs)
+{
+	unsigned long flags;
+	const char *processor_modes[] = {
+	"USER_26",	"FIQ_26",	"IRQ_26",	"SVC_26",
+	"UK4_26",	"UK5_26",	"UK6_26",	"UK7_26",
+	"UK8_26",	"UK9_26",	"UK10_26",	"UK11_26",
+	"UK12_26",	"UK13_26",	"UK14_26",	"UK15_26",
+	"USER_32",	"FIQ_32",	"IRQ_32",	"SVC_32",
+	"UK4_32",	"UK5_32",	"UK6_32",	"ABT_32",
+	"UK8_32",	"UK9_32",	"UK10_32",	"UND_32",
+	"UK12_32",	"UK13_32",	"UK14_32",	"SYS_32",
+	};
+
+	flags = condition_codes (regs);
+
+	printf ("pc : [<%08lx>]    lr : [<%08lx>]\n"
+		"sp : %08lx  ip : %08lx  fp : %08lx\n",
+		instruction_pointer (regs),
+		regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+	printf ("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
+		regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+	printf ("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
+		regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+	printf ("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
+		regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+	printf ("Flags: %c%c%c%c",
+		flags & CC_N_BIT ? 'N' : 'n',
+		flags & CC_Z_BIT ? 'Z' : 'z',
+		flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+	printf ("  IRQs %s  FIQs %s  Mode %s%s\n",
+		interrupts_enabled (regs) ? "on" : "off",
+		fast_interrupts_enabled (regs) ? "on" : "off",
+		processor_modes[processor_mode (regs)],
+		thumb_mode (regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+	printf ("undefined instruction\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+	printf ("software interrupt\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+	printf ("prefetch abort\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+	printf ("data abort\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+	printf ("not used\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+	printf ("fast interrupt request\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+	printf ("interrupt request\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+
+int interrupt_init (void)
+{
+
+/* we don't use interrupt */
+	return(0);
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+	return get_timer_masked ();
+}
+
+void set_timer (ulong t)
+{
+/* Nop	*/
+}
+
+void udelay (unsigned long usec)
+{
+	udelay_masked (usec);
+}
+
+void reset_timer_masked (void)
+{
+	u32 	tmp;
+	MX1_TCTL1       = 0x09;
+	tmp = 0x1f;		/* a little delay for timer to reset */
+	MX1_TPRER1	= 0x1f;
+	MX1_TCTL1	= 0x19;
+}
+
+ulong get_timer_masked (void)
+{
+	return MX1_TCN1;
+}
+
+void udelay_masked (unsigned long usec)
+{
+	ulong tmo;
+
+	tmo = usec / 1000;
+	tmo *= CFG_HZ;
+	tmo /= 1000;
+
+	reset_timer_masked ();
+
+	while (get_timer_masked () < tmo);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ 
+ulong  get_tbclk (void) {
+	return CFG_HZ;
+}
+
diff --git a/cpu/mc9328/serial.c b/cpu/mc9328/serial.c
new file mode 100644
index 0000000..45b6f8a
--- /dev/null
+++ b/cpu/mc9328/serial.c
@@ -0,0 +1,146 @@
+/*
+ * cpu/mc9328/serial.c 
+ * 
+ * (c) Copyright 2004
+ * Techware Information Technology, Inc.
+ * http://www.techware.com.tw/
+ *
+ * Ming-Len Wu <minglen_wu@techware.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <mc9328.h>
+
+#if defined(CONFIG_UART1) 
+/* GPIO PORT B 		*/
+
+#define reg_GIUS	MX1_GIUS_C
+#define reg_GPR		MX1_GPR_B
+#define GPIO_MASK	0xFFFFE1FF
+#define UART_BASE	0x00206000
+
+
+#elif defined (CONFIG_UART2)
+/* GPIO PORT C  	*/
+
+#define reg_GIUS	MX1_GIUS_C
+#define reg_GPR		MX1_GPR_C
+#define GPIO_MASK 	0x0FFFFFFF
+#define UART_BASE	0x207000
+
+#endif 
+
+#define reg_URXD	(*((volatile u32 *)(UART_BASE+0x00)))
+#define reg_UTXD	(*((volatile u32 *)(UART_BASE+0x40)))
+#define reg_UCR1	(*((volatile u32 *)(UART_BASE+0x80)))
+#define reg_UCR2	(*((volatile u32 *)(UART_BASE+0x84)))
+#define reg_UCR3	(*((volatile u32 *)(UART_BASE+0x88)))
+#define reg_UCR4	(*((volatile u32 *)(UART_BASE+0x8C)))
+#define reg_UFCR	(*((volatile u32 *)(UART_BASE+0x90)))
+#define reg_USR1	(*((volatile u32 *)(UART_BASE+0x94)))
+#define reg_USR2	(*((volatile u32 *)(UART_BASE+0x98)))
+#define reg_UESC	(*((volatile u32 *)(UART_BASE+0x9C)))
+#define reg_UTIM	(*((volatile u32 *)(UART_BASE+0xA0)))
+#define reg_UBIR	(*((volatile u32 *)(UART_BASE+0xA4)))
+#define reg_UBMR	(*((volatile u32 *)(UART_BASE+0xA8)))
+#define reg_UBRC	(*((volatile u32 *)(UART_BASE+0xAC)))
+
+#define TXFE_MASK	0x4000  	/* Tx buffer empty	*/
+#define RDR_MASK	0x0001		/* receive data ready	*/
+
+
+void serial_setbrg (void) {
+
+/* config I/O pins for UART 	*/
+
+	reg_GIUS 	&= GPIO_MASK;
+	reg_GPR		&= GPIO_MASK;
+
+/* config UART			*/
+
+	reg_UCR1 	= 5;
+	reg_UCR2 	= 0x4027;
+	reg_UCR4 	= 1;
+	reg_UFCR 	= 0xA81;
+
+	reg_UBIR 	= 0xF;
+	reg_UBMR 	= 0x8A;
+	reg_UBRC 	= 8;
+}
+
+
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+ 
+int serial_init (void) {
+	serial_setbrg ();
+
+	return (0);
+}
+
+
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void) {
+
+	while (!(reg_USR2 & RDR_MASK)) ; 	/* wait until RDR bit set 		*/
+
+	return (u8)reg_URXD;
+}
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c) {
+
+	while (!(reg_USR2 & TXFE_MASK));	/* wait until TXFE bit set		*/
+
+	reg_UTXD = (u16) c;
+
+	if (c == '\n')	{			/* carriage return ? append line-feed	*/
+		while (!(reg_USR2 & TXFE_MASK));	/* wait until TXFE bit set	*/
+		reg_UTXD = '\r';
+	}
+
+}
+
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc (void) {
+	return reg_USR2 & RDR_MASK;
+}
+
+
+void serial_puts (const char *s) {
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+
diff --git a/cpu/mc9328/start.S b/cpu/mc9328/start.S
new file mode 100644
index 0000000..edfce12
--- /dev/null
+++ b/cpu/mc9328/start.S
@@ -0,0 +1,388 @@
+/*
+ *  armboot - Startup Code for ARM920 CPU-core
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start:	b       reset
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction:	.word undefined_instruction
+_software_interrupt:	.word software_interrupt
+_prefetch_abort:	.word prefetch_abort
+_data_abort:		.word data_abort
+_not_used:		.word not_used
+_irq:			.word irq
+_fiq:			.word fiq
+
+	.balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * relocate armboot to ram
+ * setup stack
+ * jump to second stage
+ *
+ *************************************************************************
+ */
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+	.word _start
+
+/*
+ * These are defined in the board-specific linker script.
+ */
+.globl _bss_start
+_bss_start:
+	.word __bss_start
+
+.globl _bss_end
+_bss_end:
+	.word _end
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+	.word	0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+	.word 0x0badc0de
+#endif
+
+
+/*
+ * the actual reset code
+ */
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+#ifdef CONFIG_INIT_CRITICAL
+	bl	cpu_init_crit
+#endif
+
+relocate:				/* relocate U-Boot to RAM	    */
+	adr	r0, _start		/* r0 <- current position of code   */
+	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
+	cmp     r0, r1                  /* don't reloc during debug         */
+	beq     stack_setup
+
+	ldr	r2, _armboot_start
+	ldr	r3, _bss_start
+	sub	r2, r3, r2		/* r2 <- size of armboot            */
+	add	r2, r0, r2		/* r2 <- source end address         */
+
+copy_loop:
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
+	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
+	cmp	r0, r2			/* until source end addreee [r2]    */
+	ble	copy_loop
+
+	/* Set up the stack						    */
+stack_setup:
+	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
+	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+#ifdef CONFIG_USE_IRQ
+	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
+#endif
+	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
+
+clear_bss:
+	ldr	r0, _bss_start		/* find start of bss segment        */
+	ldr	r1, _bss_end		/* stop here                        */
+	mov 	r2, #0x00000000		/* clear                            */
+
+clbss_l:str	r2, [r0]		/* clear loop...                    */
+	add	r0, r0, #4
+	cmp	r0, r1
+	bne	clbss_l
+
+	ldr	pc, _start_armboot
+
+_start_armboot:	.word start_armboot
+
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
+	mcr	p15, 0, r0, c1, c0, 0
+
+
+	/*
+	 * before relocating, we have to setup RAM timing
+	 * because memory timing is board-dependend, you will
+	 * find a memsetup.S in your board directory.
+	 */
+	mov	ip, lr
+	bl	memsetup
+	mov	lr, ip
+
+	mov	pc, lr
+
+
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE	72
+
+#define S_OLD_R0	68
+#define S_PSR		64
+#define S_PC		60
+#define S_LR		56
+#define S_SP		52
+
+#define S_IP		48
+#define S_FP		44
+#define S_R10		40
+#define S_R9		36
+#define S_R8		32
+#define S_R7		28
+#define S_R6		24
+#define S_R5		20
+#define S_R4		16
+#define S_R3		12
+#define S_R2		8
+#define S_R1		4
+#define S_R0		0
+
+#define MODE_SVC 0x13
+#define I_BIT	 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+	.macro	bad_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	ldr	r2, _armboot_start
+	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	ldmia	r2, {r2 - r3}			@ get pc, cpsr
+	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
+
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	stmia	r5, {r0 - r3}			@ save sp_SVC, lr_SVC, pc, cpsr
+	mov	r0, sp
+	.endm
+
+	.macro	irq_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	add     r8, sp, #S_PC
+	stmdb   r8, {sp, lr}^                   @ Calling SP, LR
+	str     lr, [r8, #0]                    @ Save calling PC
+	mrs     r6, spsr
+	str     r6, [r8, #4]                    @ Save CPSR
+	str     r0, [r8, #8]                    @ Save OLD_R0
+	mov	r0, sp
+	.endm
+
+	.macro	irq_restore_user_regs
+	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
+	mov	r0, r0
+	ldr	lr, [sp, #S_PC]			@ Get PC
+	add	sp, sp, #S_FRAME_SIZE
+	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro get_bad_stack
+	ldr	r13, _armboot_start		@ setup our mode stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+
+	str	lr, [r13]			@ save caller lr / spsr
+	mrs	lr, spsr
+	str     lr, [r13, #4]
+
+	mov	r13, #MODE_SVC			@ prepare SVC-Mode
+	@ msr	spsr_c, r13
+	msr	spsr, r13
+	mov	lr, pc
+	movs	pc, lr
+	.endm
+
+	.macro get_irq_stack			@ setup IRQ stack
+	ldr	sp, IRQ_STACK_START
+	.endm
+
+	.macro get_fiq_stack			@ setup FIQ stack
+	ldr	sp, FIQ_STACK_START
+	.endm
+
+/*
+ * exception handlers
+ */
+	.align  5
+undefined_instruction:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_undefined_instruction
+
+	.align	5
+software_interrupt:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_software_interrupt
+
+	.align	5
+prefetch_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_prefetch_abort
+
+	.align	5
+data_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_data_abort
+
+	.align	5
+not_used:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+	.align	5
+irq:
+	get_irq_stack
+	irq_save_user_regs
+	bl 	do_irq
+	irq_restore_user_regs
+
+	.align	5
+fiq:
+	get_fiq_stack
+	/* someone ought to write a more effiction fiq_save_user_regs */
+	irq_save_user_regs
+	bl 	do_fiq
+	irq_restore_user_regs
+
+#else
+
+	.align	5
+irq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_irq
+
+	.align	5
+fiq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_fiq
+
+#endif
+
+	.align	5
+.globl reset_cpu
+reset_cpu:
+	mov     ip, #0
+	mcr     p15, 0, ip, c7, c7, 0           @ invalidate cache
+	mcr     p15, 0, ip, c8, c7, 0           @ flush TLB (v4)
+	mrc     p15, 0, ip, c1, c0, 0           @ get ctrl register
+	bic     ip, ip, #0x000f                 @ ............wcam
+	bic     ip, ip, #0x2100                 @ ..v....s........
+	mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
+	mov     pc, r0
diff --git a/include/configs/Adder.h b/include/configs/Adder.h
new file mode 100644
index 0000000..11a82c9
--- /dev/null
+++ b/include/configs/Adder.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 2004 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * Support for Analogue&Micro Adder boards family.
+ * Tested on AdderII and Adder87x.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#if !defined(CONFIG_MPC875) && !defined(CONFIG_MPC852T)
+#define CONFIG_MPC875
+#endif
+
+#define CONFIG_ADDER				/* Analogue&Micro Adder board	*/
+
+#define	CONFIG_8xx_CONS_SMC1	1		/* Console is on SMC1		*/
+#define CONFIG_BAUDRATE		38400
+
+#define	CONFIG_FEC_ENET				/* Ethernet is on FEC		*/
+#ifdef  CONFIG_FEC_ENET
+#define CFG_DISCOVER_PHY
+#define FEC_ENET
+#endif /* CONFIG_FEC_ENET */
+
+#define CONFIG_8xx_OSCLK	10000000	/* 10 MHz oscillator on EXTCLK  */
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL  \
+				| CFG_CMD_DHCP   \
+				| CFG_CMD_IMMAP  \
+				| CFG_CMD_MII    \
+				| CFG_CMD_PING   \
+				)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	5		/* Autoboot after 5 seconds	*/
+#define CONFIG_BOOTCOMMAND	"bootm fe040000"	/* Autoboot command	*/
+#define CONFIG_BOOTARGS		"root=/dev/mtdblock2 rw"
+
+#define CONFIG_BZIP2		/* Include support for bzip2 compressed images  */
+#undef	CONFIG_WATCHDOG		/* Disable platform specific watchdog		*/
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ */
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#define CFG_LONGHELP				/* #undef to save memory	*/
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)  /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* Max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* Default load address		*/
+
+#define CFG_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * RAM configuration (note that CFG_SDRAM_BASE must be zero)
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_SDRAM_SIZE		0x00800000	/* 8 Mbyte			*/
+
+#define CFG_OR1_PRELIM  	(0xFF800000 | OR_CSNT_SAM | OR_ACS_DIV2)
+#define CFG_BR1_PRELIM  	(CFG_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V)
+
+#define CFG_MAMR		0x00802114
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on		*/
+#define CFG_MEMTEST_END		0x00700000	/* 1 ... 7 MB in SDRAM		*/
+
+#define CFG_RESET_ADDRESS	0x09900000
+
+/*-----------------------------------------------------------------------
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 KB for Monitor   */
+#ifdef CONFIG_BZIP2
+#define CFG_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc() */
+#else
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
+#endif /* CONFIG_BZIP2 */
+
+/*-----------------------------------------------------------------------
+ * Flash organisation
+ */
+#define CFG_FLASH_BASE		0xFE000000
+#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
+#define CFG_MAX_FLASH_BANKS	1		/* Max number of flash banks	*/
+#define CFG_MAX_FLASH_SECT	128		/* Max num of sects on one chip */
+
+/* Environment is in flash */
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x10000 	/* We use one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+
+#define CFG_OR0_PRELIM		0xFF000774
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_16 | BR_MS_GPCM | BR_V)
+
+/*-----------------------------------------------------------------------
+ * Internal Memory Map Register
+ */
+#define CFG_IMMR		0xFF000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2F00		/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	128  /* Size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Configuration registers
+ */
+#ifdef CONFIG_WATCHDOG
+#define CFG_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
+				 SYPCR_SWF  | SYPCR_SWE | SYPCR_SWRI | \
+				 SYPCR_SWP)
+#else
+#define CFG_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
+				 SYPCR_SWF  | SYPCR_SWP)
+#endif /* CONFIG_WATCHDOG */
+
+#define CFG_SIUMCR		(SIUMCR_MLRC01 | SIUMCR_DBGC11)
+
+/* TBSCR - Time Base Status and Control Register */
+#define CFG_TBSCR		(TBSCR_TBF | TBSCR_TBE)
+
+/* PISCR - Periodic Interrupt Status and Control */
+#define CFG_PISCR       	(PISCR_PS | PISCR_PITF)
+
+/* PLPRCR - PLL, Low-Power, and Reset Control Register */
+/* #define CFG_PLPRCR      	PLPRCR_TEXPS */
+
+/* SCCR - System Clock and reset Control Register */
+#define SCCR_MASK       	SCCR_EBDF11
+#define CFG_SCCR		SCCR_RTSEL
+
+#define CFG_DER         	0
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx chips			*/
+
+/*-----------------------------------------------------------------------
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from flash	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
new file mode 100644
index 0000000..9d4ab2b
--- /dev/null
+++ b/include/configs/mx1ads.h
@@ -0,0 +1,185 @@
+/*
+ * include/configs/mx1ads.h
+ * 
+ * (c) Copyright 2004
+ * Techware Information Technology, Inc.
+ * http://www.techware.com.tw/
+ *
+ * Ming-Len Wu <minglen_wu@techware.com.tw>
+ *
+ * This is the Configuration setting for Motorola MX1ADS board
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL		/* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM920T		1	/* This is an ARM920T Core		*/
+#define	CONFIG_MC9328		1	/* It's a Motorola MC9328 SoC 		*/
+#define CONFIG_MX1ADS		1	/* on a Motorola MX1ADS Board  		*/
+
+#define BOARD_LATE_INIT		1 
+
+
+#define USE_920T_MMU		1
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff 		*/
+
+#if 0 
+#define CFG_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
+#define CFG_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
+#define CFG_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
+#endif 
+
+/*
+ * Size of malloc() pool
+ */
+
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ *  CS8900 Ethernet drivers
+ */
+#define CONFIG_DRIVER_CS8900	1	/* we have a CS8900 on-board */
+#define CS8900_BASE		0x15000300
+#define CS8900_BUS16		1 	/* the Linux driver does accesses as shorts */
+
+/*
+ * select serial console configuration
+ */
+
+#define CONFIG_UART1 		1 
+/* #define CONFIG_UART2		1	*/
+
+#define CONFIG_BAUDRATE		115200
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#define CONFIG_COMMANDS \
+			(CONFIG_CMD_DFL	 | \
+			CFG_CMD_CACHE	 | \
+			/*CFG_CMD_NAND	 |*/ \
+			/*CFG_CMD_EEPROM |*/ \
+			/*CFG_CMD_I2C	 |*/ \
+			/*CFG_CMD_USB	 |*/ \
+			CFG_CMD_REGINFO  | \
+			CFG_CMD_ELF)  
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS    	"root=/dev/docbp mem=48M" 
+#define CONFIG_ETHADDR		08:00:3e:26:0a:5c
+#define CONFIG_NETMASK          255.255.255.0
+#define CONFIG_IPADDR		192.168.0.22
+#define CONFIG_SERVERIP		192.168.0.11
+#define CONFIG_BOOTFILE		"mx1ads"
+/*#define CONFIG_BOOTCOMMAND	"tftp; bootm" */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
+						/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+ 
+#define CFG_HUSH_PARSER         1
+#define CFG_PROMPT_HUSH_PS2	"> "
+ 
+#define	CFG_LONGHELP				/* undef to save memory		*/
+
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT		"MX1ADS$ "	/* Monitor Command Prompt */
+#else
+#define CFG_PROMPT		"MX1ADS=> "	/* Monitor Command Prompt */
+#endif
+
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CFG_PBSIZE 		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) 
+						/* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x09000000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0AF00000	/* 63 MB in DRAM	*/
+
+#undef  CFG_CLKS_IN_HZ				/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR		0x08800000	/* default load address	*/
+
+
+#define	CFG_HZ			1000
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+ 
+
+#define CONFIG_NR_DRAM_BANKS	1	   	/* we have 1 bank of SDRAM 	*/
+#define PHYS_SDRAM_1		0x08000000 	/* SDRAM  on CSD0 		*/
+#define PHYS_SDRAM_1_SIZE	0x04000000 	/* 64 MB 			*/
+
+#define CFG_MAX_FLASH_BANKS	1		/* 1 bank of SyncFlash 		*/
+#define CFG_FLASH_BASE		0x0C000000 	/* SyncFlash on CSD1 		*/
+#define FLASH_BANK_SIZE		0x01000000	/* 16 MB Total 		 	*/
+
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+
+#define CONFIG_SYNCFLASH	1
+#define PHYS_FLASH_SIZE		0x01000000
+#define CFG_MAX_FLASH_SECT	(16)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x00ff0000)
+ 
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SIZE		0x0f000	/* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE	0x100000
+#endif	/* __CONFIG_H */
diff --git a/include/flash.h b/include/flash.h
index 190eb17..ddba7e5 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -372,6 +372,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of
 
 #define FLASH_FUJLV650	0x00B4		/* Fujitsu MBM 29LV650UE/651UE		*/
 
+#define FLASH_MT28S4M16LC 0x00B5	/* Micron MT28S4M16LC 			*/
 #define FLASH_UNKNOWN	0xFFFF		/* unknown flash type			*/
 
 
diff --git a/include/mc9328.h b/include/mc9328.h
new file mode 100644
index 0000000..5adbf2c
--- /dev/null
+++ b/include/mc9328.h
@@ -0,0 +1,1221 @@
+/*
+ * include/mc9328.h
+ * 
+ * (c) Copyright 2004
+ * Techware Information Technology, Inc.
+ * http://www.techware.com.tw/
+ *
+ * Ming-Len Wu <minglen_wu@techware.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __MC9328_H__
+#define __MC9328_H__
+
+typedef	volatile unsigned long	VU32;
+typedef	VU32	*		P_VU32;
+
+#define __REG(x)		(*((volatile u32 *)(x)))
+
+
+/*
+ * MX1 Chip selects & internal memory's 
+ */
+
+
+#define MX1_DMI_PHYS 	0x00000000	/* double map image 	*/
+#define MX1_BROM_PHYS	0x00100000	/* Bootstrape ROM 	*/
+#define MX1_ESRAM_PHYS	0x00300000	/* Embedded SRAM (128KB)*/
+
+#define MX1_CSD0_PHYS	0x08000000	/* CSD0 64MB (SDRAM) 	*/
+#define MX1_CSD1_PHYS	0x0C000000	/* CSD1 64MB (SDRAM) 	*/
+#define MX1_CS0_PHYS	0x10000000	/* CS0 32MB (Flash) 	*/
+#define MX1_CS1_PHYS	0x12000000	/* CS1 16MB (Flash) 	*/
+#define MX1_CS2_PHYS	0x13000000	/* CS2 16MB (Ext SRAM) 	*/
+#define MX1_CS3_PHYS	0x14000000	/* CS3 16MB (Spare) 	*/
+#define MX1_CS4_PHYS	0x15000000	/* CS4 16MB (Spare) 	*/
+#define MX1_CS5_PHYS	0x16000000	/* CS5 16MB (Spare) 	*/
+
+
+
+/*
+ * 	MX1 Watchdog registers
+ */
+
+#define MX1_WCR		__REG(0x00201000)  /* Watchdog Control Register 	*/
+#define MX1_WSR		__REG(0x00201004)  /* Watchdog Service Register		*/
+#define MX1_WSTR	__REG(0x00201008)  /* Watchdog Status Register 		*/
+
+
+
+/*
+ *	MX1 Timer registers
+ */
+
+#define MX1_TCTL1	__REG(0x00202000)  /* Timer 1 Control Register 		*/
+#define MX1_TPRER1	__REG(0x00202004)  /* Timer 1 Prescaler Register 	*/
+#define MX1_TCMP1	__REG(0x00202008)  /* Timer 1 Compare Register 		*/
+#define MX1_TCR1	__REG(0x0020200C)  /* Timer 1 Capture Register 		*/
+#define MX1_TCN1	__REG(0x00202010)  /* Timer 1 Counter Register 		*/
+#define MX1_TSTAT1	__REG(0x00202014)  /* Timer 1 Status Register 		*/
+
+
+#define MX1_TCTL2	__REG(0x00203000)  /* Timer 2 Control Register 		*/
+#define MX1_TPRER2	__REG(0x00203004)  /* Timer 2 Prescaler Register 	*/
+#define MX1_TCMP2	__REG(0x00203008)  /* Timer 2 Compare Register 		*/
+#define MX1_TCR2	__REG(0x0020300C)  /* Timer 2 Capture Register 		*/
+#define MX1_TCN2	__REG(0x00203010)  /* Timer 2 Counter Register 		*/
+#define MX1_TSTAT2	__REG(0x00203014)  /* Timer 2 Status Register 		*/
+
+
+
+/*
+ *	MX1 RTC registers
+ */
+
+#define MX1_HOURMIN	__REG(0x00204000)  /* RTC Hour & Min Counter Registers 	*/
+#define MX1_SECONDS	__REG(0x00204004)  /* RTC Seconds Counter Registers 	*/
+#define MX1_ALRM_HM	__REG(0x00204008)  /* RTC Hour & Min Alarm Registers 	*/
+#define MX1_ALRM_SEC	__REG(0x0020400C)  /* RTC Seconds Alarm Registers 	*/
+#define MX1_RCCTL	__REG(0x00204010)  /* RTC Control Registers	 	*/
+#define MX1_RTCISR	__REG(0x00204014)  /* RTC Interrupt Status Registers 	*/
+#define MX1_RTCIENR	__REG(0x00204018)  /* RTC Interrupt Enable Registers 	*/
+#define MX1_STPWCH	__REG(0x0020401C)  /* RTC Stopwatch Minutes Registers 	*/
+#define MX1_DAYR	__REG(0x00204020)  /* RTC Days Counter Registers 	*/
+#define MX1_DAYALARM	__REG(0x00204020)  /* RTC Day Alarm Registers 		*/
+
+
+/*
+ *	MX1 LCD Controller registers
+ */
+
+#define MX1_SSA		__REG(0x00205000)  /* Screen Start Address Register 	*/
+#define MX1_SIZE	__REG(0x00205004)  /* Size Register 			*/
+#define MX1_VPW		__REG(0x00205008)  /* Virtual Page Width Register 	*/
+#define MX1_CPOS	__REG(0x0020500C)  /* LCD Cursor Position  Register 	*/
+#define MX1_LCWHB	__REG(0x00205010)  /* LCD Cursor Width Height & Blink Register 	*/
+#define MX1_LCHCC	__REG(0x00205014)  /* LCD Color Cursor Mapping Register */
+#define MX1_PCR 	__REG(0x00205018)  /* LCD Panel Configuration Register 	*/
+#define MX1_HCR 	__REG(0x0020501C)  /* Horizontal Configuration Register */
+#define MX1_VCR 	__REG(0x00205020)  /* Vertical Configuration Register 	*/
+#define MX1_POS 	__REG(0x00205024)  /* Panning Offset Register 		*/
+#define MX1_LGPMR 	__REG(0x00205028)  /* LCD Gray Palette Mapping Register */
+#define MX1_PWMR 	__REG(0x0020502C)  /* PWM Contrast Control Register 	*/
+#define MX1_DMACR 	__REG(0x00205030)  /* DMA Control Register	 	*/
+#define MX1_RMCR 	__REG(0x00205034)  /* Refresh Mode Control Register	*/
+#define MX1_LCDICR 	__REG(0x00205038)  /* Interrupt Configuration Register	*/
+#define MX1_LCDISR 	__REG(0x00205040)  /* Interrupt Status Register		*/
+
+
+/*
+ *	MX1 UART registers
+ */
+
+/* UART 1 */
+#define MX1_URX0D_1	__REG(0x00206000)  /* UART 1 Receiver Register 0 	*/
+#define MX1_URX1D_1	__REG(0x00206004)  /* UART 1 Receiver Register 1 	*/
+#define MX1_URX2D_1	__REG(0x00206008)  /* UART 1 Receiver Register 2 	*/
+#define MX1_URX3D_1	__REG(0x0020600C)  /* UART 1 Receiver Register 3 	*/
+#define MX1_URX4D_1	__REG(0x00206010)  /* UART 1 Receiver Register 4 	*/
+#define MX1_URX5D_1	__REG(0x00206014)  /* UART 1 Receiver Register 5 	*/
+#define MX1_URX6D_1	__REG(0x00206018)  /* UART 1 Receiver Register 6 	*/
+#define MX1_URX7D_1	__REG(0x0020601C)  /* UART 1 Receiver Register 7 	*/
+#define MX1_URX8D_1	__REG(0x00206020)  /* UART 1 Receiver Register 8 	*/
+#define MX1_URX9D_1	__REG(0x00206024)  /* UART 1 Receiver Register 9 	*/
+#define MX1_URX10D_1	__REG(0x00206028)  /* UART 1 Receiver Register 10 	*/
+#define MX1_URX11D_1	__REG(0x0020602C)  /* UART 1 Receiver Register 11 	*/
+#define MX1_URX12D_1	__REG(0x00206030)  /* UART 1 Receiver Register 12	*/
+#define MX1_URX13D_1	__REG(0x00206034)  /* UART 1 Receiver Register 13	*/
+#define MX1_URX14D_1	__REG(0x00206038)  /* UART 1 Receiver Register 14 	*/
+#define MX1_URX15D_1	__REG(0x0020603c)  /* UART 1 Receiver Register 15	*/
+
+
+#define MX1_UTX0D_1	__REG(0x00206040)  /* UART 1 Transmitter Register 0 	*/
+#define MX1_UTX1D_1	__REG(0x00206044)  /* UART 1 Transmitter Register 1 	*/
+#define MX1_UTX2D_1	__REG(0x00206048)  /* UART 1 Transmitter Register 2 	*/
+#define MX1_UTX3D_1	__REG(0x0020604C)  /* UART 1 Transmitter Register 3 	*/
+#define MX1_UTX4D_1	__REG(0x00206050)  /* UART 1 Transmitter Register 4 	*/
+#define MX1_UTX5D_1	__REG(0x00206054)  /* UART 1 Transmitter Register 5 	*/
+#define MX1_UTX6D_1	__REG(0x00206058)  /* UART 1 Transmitter Register 6 	*/
+#define MX1_UTX7D_1	__REG(0x0020605C)  /* UART 1 Transmitter Register 7 	*/
+#define MX1_UTX8D_1	__REG(0x00206060)  /* UART 1 Transmitter Register 8 	*/
+#define MX1_UTX9D_1	__REG(0x00206064)  /* UART 1 Transmitter Register 9 	*/
+#define MX1_UTX10D_1	__REG(0x00206068)  /* UART 1 Transmitter Register 10 	*/
+#define MX1_UTX11D_1	__REG(0x0020606C)  /* UART 1 Transmitter Register 11 	*/
+#define MX1_UTX12D_1	__REG(0x00206060)  /* UART 1 Transmitter Register 12	*/
+#define MX1_UTX13D_1	__REG(0x00206074)  /* UART 1 Transmitter Register 13	*/
+#define MX1_UTX14D_1	__REG(0x00206078)  /* UART 1 Transmitter Register 14 	*/
+#define MX1_UTX15D_1	__REG(0x0020607c)  /* UART 1 Transmitter Register 15	*/
+
+#define MX1_UCR1_1	__REG(0x00206080)  /* UART 1 Control Register 1		*/
+#define MX1_UCR2_1	__REG(0x00206084)  /* UART 1 Control Register 2		*/
+#define MX1_UCR3_1	__REG(0x00206088)  /* UART 1 Control Register 3		*/
+#define MX1_UCR4_1	__REG(0x0020608C)  /* UART 1 Control Register 4		*/
+#define MX1_UFCR_1	__REG(0x00206090)  /* UART 1 FIFO Control Register 	*/
+#define MX1_USR1_1	__REG(0x00206094)  /* UART 1 Status  Register 1		*/
+#define MX1_USR2_1	__REG(0x00206098)  /* UART 1 Status  Register 2		*/
+#define MX1_UESC_1	__REG(0x0020609C)  /* UART 1 Escape Character Register 	*/
+#define MX1_UTIM_1	__REG(0x002060A0)  /* UART 1 Escape Timer Register 	*/
+#define MX1_UBIR_1	__REG(0x002060A4)  /* UART 1 BRM Incremental Register 	*/
+#define MX1_UBMR_1	__REG(0x002060A8)  /* UART 1 BRM Modulator Register 	*/
+#define MX1_UBRC_1	__REG(0x002060AC)  /* UART 1 Baud Rate Count Register 	*/
+#define MX1_BIPR1_1	__REG(0x002060B0)  /* UART 1 BRM Incremental Preset Register 1	*/
+#define MX1_BIPR2_1	__REG(0x002060B4)  /* UART 1 BRM Incremental Preset Register 2	*/
+#define MX1_BIPR3_1	__REG(0x002060B8)  /* UART 1 BRM Incremental Preset Register 3	*/
+#define MX1_BIPR4_1	__REG(0x002060BC)  /* UART 1 BRM Incremental Preset Register 4	*/
+#define MX1_BMPR1_1	__REG(0x002060C0)  /* UART 1 BRM Modulator Preset Register 1	*/
+#define MX1_BMPR2_1	__REG(0x002060C4)  /* UART 1 BRM Modulator Preset Register 2	*/
+#define MX1_BMPR3_1	__REG(0x002060C8)  /* UART 1 BRM Modulator Preset Register 3	*/
+#define MX1_BMPR4_1	__REG(0x002060CC)  /* UART 1 BRM Modulator Preset Register 4	*/
+#define MX1_UTS_1	__REG(0x002060D0)  /* UART 1 Test Register 1	 	*/
+
+
+/* UART 2 */
+#define MX1_URX0D_2	__REG(0x00207000)  /* UART 2 Receiver Register 0 	*/
+#define MX1_URX1D_2	__REG(0x00207004)  /* UART 2 Receiver Register 1 	*/
+#define MX1_URX2D_2	__REG(0x00207008)  /* UART 2 Receiver Register 2 	*/
+#define MX1_URX3D_2	__REG(0x0020700C)  /* UART 2 Receiver Register 3 	*/
+#define MX1_URX4D_2	__REG(0x00207010)  /* UART 2 Receiver Register 4 	*/
+#define MX1_URX5D_2	__REG(0x00207014)  /* UART 2 Receiver Register 5 	*/
+#define MX1_URX6D_2	__REG(0x00207018)  /* UART 2 Receiver Register 6 	*/
+#define MX1_URX7D_2	__REG(0x0020701C)  /* UART 2 Receiver Register 7 	*/
+#define MX1_URX8D_2	__REG(0x00207020)  /* UART 2 Receiver Register 8 	*/
+#define MX1_URX9D_2	__REG(0x00207024)  /* UART 2 Receiver Register 9 	*/
+#define MX1_URX10D_2	__REG(0x00207028)  /* UART 2 Receiver Register 10 	*/
+#define MX1_URX11D_2	__REG(0x0020702C)  /* UART 2 Receiver Register 11 	*/
+#define MX1_URX12D_2	__REG(0x00207030)  /* UART 2 Receiver Register 12	*/
+#define MX1_URX13D_2	__REG(0x00207034)  /* UART 2 Receiver Register 13	*/
+#define MX1_URX14D_2	__REG(0x00207038)  /* UART 2 Receiver Register 14 	*/
+#define MX1_URX15D_2	__REG(0x0020703c)  /* UART 2 Receiver Register 15	*/
+
+
+#define MX1_UTX0D_2	__REG(0x00207040)  /* UART 2 Transmitter Register 0 	*/
+#define MX1_UTX1D_2	__REG(0x00207044)  /* UART 2 Transmitter Register 1 	*/
+#define MX1_UTX2D_2	__REG(0x00207048)  /* UART 2 Transmitter Register 2 	*/
+#define MX1_UTX3D_2	__REG(0x0020704C)  /* UART 2 Transmitter Register 3 	*/
+#define MX1_UTX4D_2	__REG(0x00207050)  /* UART 2 Transmitter Register 4 	*/
+#define MX1_UTX5D_2	__REG(0x00207054)  /* UART 2 Transmitter Register 5 	*/
+#define MX1_UTX6D_2	__REG(0x00207058)  /* UART 2 Transmitter Register 6 	*/
+#define MX1_UTX7D_2	__REG(0x0020705C)  /* UART 2 Transmitter Register 7 	*/
+#define MX1_UTX8D_2	__REG(0x00207060)  /* UART 2 Transmitter Register 8 	*/
+#define MX1_UTX9D_2	__REG(0x00207064)  /* UART 2 Transmitter Register 9 	*/
+#define MX1_UTX10D_2	__REG(0x00207068)  /* UART 2 Transmitter Register 10 	*/
+#define MX1_UTX11D_2	__REG(0x0020706C)  /* UART 2 Transmitter Register 11 	*/
+#define MX1_UTX12D_2	__REG(0x00207060)  /* UART 2 Transmitter Register 12	*/
+#define MX1_UTX13D_2	__REG(0x00207074)  /* UART 2 Transmitter Register 13	*/
+#define MX1_UTX14D_2	__REG(0x00207078)  /* UART 2 Transmitter Register 14 	*/
+#define MX1_UTX15D_2	__REG(0x0020707c)  /* UART 2 Transmitter Register 15	*/
+
+#define MX1_UCR1_2	__REG(0x00207080)  /* UART 2 Control Register 1		*/
+#define MX1_UCR2_2	__REG(0x00207084)  /* UART 2 Control Register 2		*/
+#define MX1_UCR3_2	__REG(0x00207088)  /* UART 2 Control Register 3		*/
+#define MX1_UCR4_2	__REG(0x0020708C)  /* UART 2 Control Register 4		*/
+#define MX1_UFCR_2	__REG(0x00207090)  /* UART 2 FIFO Control Register 	*/
+#define MX1_USR1_2	__REG(0x00207094)  /* UART 2 Status  Register 1		*/
+#define MX1_USR2_2	__REG(0x00207098)  /* UART 2 Status  Register 2		*/
+#define MX1_UESC_2	__REG(0x0020709C)  /* UART 2 Escape Character Register 	*/
+#define MX1_UTIM_2	__REG(0x002070A0)  /* UART 2 Escape Timer Register 	*/
+#define MX1_UBIR_2	__REG(0x002070A4)  /* UART 2 BRM Incremental Register 	*/
+#define MX1_UBMR_2	__REG(0x002070A8)  /* UART 2 BRM Modulator Register 	*/
+#define MX1_UBRC_2	__REG(0x002070AC)  /* UART 2 Baud Rate Count Register 	*/
+#define MX1_BIPR1_2	__REG(0x002070B0)  /* UART 2 BRM Incremental Preset Register 1	*/
+#define MX1_BIPR2_2	__REG(0x002070B4)  /* UART 2 BRM Incremental Preset Register 2	*/
+#define MX1_BIPR3_2	__REG(0x002070B8)  /* UART 2 BRM Incremental Preset Register 3	*/
+#define MX1_BIPR4_2	__REG(0x002070BC)  /* UART 2 BRM Incremental Preset Register 4	*/
+#define MX1_BMPR1_2	__REG(0x002070C0)  /* UART 2 BRM Modulator Preset Register 1	*/
+#define MX1_BMPR2_2	__REG(0x002070C4)  /* UART 2 BRM Modulator Preset Register 2	*/
+#define MX1_BMPR3_2	__REG(0x002070C8)  /* UART 2 BRM Modulator Preset Register 3	*/
+#define MX1_BMPR4_2	__REG(0x002070CC)  /* UART 2 BRM Modulator Preset Register 4	*/
+#define MX1_UTS_2	__REG(0x002070D0)  /* UART 2 Test Register 1	 	*/
+
+
+/*
+ *	MX1 PWM registers
+ */
+
+#define MX1_PWMC	__REG(0x00208000)  /* PWM Control Register 		*/
+#define MX1_PWMS	__REG(0x00208004)  /* PWM Sample Register 		*/
+#define MX1_PWMP	__REG(0x00208008)  /* PWM Period Register 		*/
+#define MX1_PWMCNT	__REG(0x0020800C)  /* PWM Counter Register 		*/
+
+
+
+/*
+ *	MX1 DMAC registers
+ */
+
+#define MX1_DCR		__REG(0x00209000)  /* DMA Control Register 		*/
+#define MX1_DISR	__REG(0x00209004)  /* DMA Interrupt Status Register 	*/
+#define MX1_DIMR	__REG(0x00209008)  /* DMA Interrupt Mask Register 	*/
+#define MX1_DBTOSR	__REG(0x0020900C)  /* DMA Burst Time-Out Status Register 	*/
+#define MX1_DRTOSR	__REG(0x00209010)  /* DMA Request Time-Out Status Register 	*/
+#define MX1_DSESR	__REG(0x00209014)  /* DMA Request Time-Out Status Register 	*/
+#define MX1_DBOSR	__REG(0x00209018)  /* DMA Buffer Overflow Status Register 	*/
+#define MX1_DBTOCR	__REG(0x0020901C)  /* DMA Burst Time-Out Control Register 	*/
+
+#define MX1_WSRA	__REG(0x00209040)  /* DMA W-Size Register A 		*/
+#define MX1_XSRA	__REG(0x00209044)  /* DMA X-Size Register A 		*/
+#define MX1_YSRA	__REG(0x00209048)  /* DMA Y-Size Register A 		*/
+
+#define MX1_WSRB	__REG(0x0020904C)  /* DMA W-Size Register B 		*/
+#define MX1_XSRB	__REG(0x00209050)  /* DMA X-Size Register B 		*/
+#define MX1_YSRB	__REG(0x00209054)  /* DMA Y-Size Register B 		*/
+
+/* Channel 0 */
+
+#define MX1_SAR0	__REG(0x00209080)  /* Channel 0 Source Address Register */
+#define MX1_DAR0	__REG(0x00209084)  /* Channel 0 Destination Address Register 	*/
+#define MX1_CNTR0	__REG(0x00209088)  /* Channel 0 Count Register 		*/
+#define MX1_CCR0	__REG(0x0020908C)  /* Channel 0 Control Register 	*/
+#define MX1_RSSR0	__REG(0x00209090)  /* Channel 0 Request Source Select Register 	*/
+#define MX1_BLR0	__REG(0x00209094)  /* Channel 0 Burst Length  Register 	*/
+#define MX1_RTOR0	__REG(0x00209098)  /* Channel 0 Request Time-Out Register 	*/
+#define MX1_BUCR0	__REG(0x00209098)  /* Channel 0 Bus Utilization Control Register 	*/
+
+
+/* Channel 1 */
+
+#define MX1_SAR1	__REG(0x002090C0)  /* Channel 1 Source Address Register */
+#define MX1_DAR1	__REG(0x002090C4)  /* Channel 1 Destination Address Register 	*/
+#define MX1_CNTR1	__REG(0x002090C8)  /* Channel 1 Count Register 		*/
+#define MX1_CCR1	__REG(0x002090CC)  /* Channel 1 Control Register 	*/
+#define MX1_RSSR1	__REG(0x002090D0)  /* Channel 1 Request Source Select Register 	*/
+#define MX1_BLR1	__REG(0x002090D4)  /* Channel 1 Burst Length  Register 	*/
+#define MX1_RTOR1	__REG(0x002090D8)  /* Channel 1 Request Time-Out Register 	*/
+#define MX1_BUCR1	__REG(0x002090D8)  /* Channel 1 Bus Utilization Control Register 	*/
+
+
+/* Channel 2 */
+
+#define MX1_SAR2	__REG(0x00209100)  /* Channel 2 Source Address Register */
+#define MX1_DAR2	__REG(0x00209104)  /* Channel 2 Destination Address Register 	*/
+#define MX1_CNTR2	__REG(0x00209108)  /* Channel 2 Count Register 		*/
+#define MX1_CCR2	__REG(0x0020910C)  /* Channel 2 Control Register 	*/
+#define MX1_RSSR2	__REG(0x00209110)  /* Channel 2 Request Source Select Register 	*/
+#define MX1_BLR2	__REG(0x00209114)  /* Channel 2 Burst Length  Register 	*/
+#define MX1_RTOR2	__REG(0x00209118)  /* Channel 2 Request Time-Out Register 	*/
+#define MX1_BUCR2	__REG(0x00209118)  /* Channel 2 Bus Utilization Control Register 	*/
+
+
+
+/* Channel 3 */
+
+#define MX1_SAR3	__REG(0x00209140)  /* Channel 3 Source Address Register */
+#define MX1_DAR3	__REG(0x00209144)  /* Channel 3 Destination Address Register 	*/
+#define MX1_CNTR3	__REG(0x00209148)  /* Channel 3 Count Register 		*/
+#define MX1_CCR3	__REG(0x0020914C)  /* Channel 3 Control Register 	*/
+#define MX1_RSSR3	__REG(0x00209150)  /* Channel 3 Request Source Select Register 	*/
+#define MX1_BLR3	__REG(0x00209154)  /* Channel 3 Burst Length  Register 	*/
+#define MX1_RTOR3	__REG(0x00209158)  /* Channel 3 Request Time-Out Register 	*/
+#define MX1_BUCR3	__REG(0x00209158)  /* Channel 3 Bus Utilization Control Register 	*/
+
+
+/* Channel 4 */
+
+#define MX1_SAR4	__REG(0x00209180)  /* Channel 4 Source Address Register */
+#define MX1_DAR4	__REG(0x00209184)  /* Channel 4 Destination Address Register 	*/
+#define MX1_CNTR4	__REG(0x00209188)  /* Channel 4 Count Register 		*/
+#define MX1_CCR4	__REG(0x0020918C)  /* Channel 4 Control Register 	*/
+#define MX1_RSSR4	__REG(0x00209190)  /* Channel 4 Request Source Select Register 	*/
+#define MX1_BLR4	__REG(0x00209194)  /* Channel 4 Burst Length  Register 	*/
+#define MX1_RTOR4	__REG(0x00209198)  /* Channel 4 Request Time-Out Register 	*/
+#define MX1_BUCR4	__REG(0x00209198)  /* Channel 4 Bus Utilization Control Register 	*/
+
+
+/* Channel 5 */
+
+#define MX1_SAR5	__REG(0x002091C0)  /* Channel 5 Source Address Register */
+#define MX1_DAR5	__REG(0x002091C4)  /* Channel 5 Destination Address Register 	*/
+#define MX1_CNTR5	__REG(0x002091C8)  /* Channel 5 Count Register 		*/
+#define MX1_CCR5	__REG(0x002091CC)  /* Channel 5 Control Register 	*/
+#define MX1_RSSR5	__REG(0x002091D0)  /* Channel 5 Request Source Select Register 	*/
+#define MX1_BLR5	__REG(0x002091D4)  /* Channel 5 Burst Length  Register 	*/
+#define MX1_RTOR5	__REG(0x002091D8)  /* Channel 5 Request Time-Out Register 	*/
+#define MX1_BUCR5	__REG(0x002091D8)  /* Channel 5 Bus Utilization Control Register 	*/
+
+
+/* Channel 6 */
+
+#define MX1_SAR6	__REG(0x00209200)  /* Channel 6 Source Address Register */
+#define MX1_DAR6	__REG(0x00209204)  /* Channel 6 Destination Address Register 	*/
+#define MX1_CNTR6	__REG(0x00209208)  /* Channel 6 Count Register 		*/
+#define MX1_CCR6	__REG(0x0020920C)  /* Channel 6 Control Register 	*/
+#define MX1_RSSR6	__REG(0x00209210)  /* Channel 6 Request Source Select Register 	*/
+#define MX1_BLR6	__REG(0x00209214)  /* Channel 6 Burst Length  Register 	*/
+#define MX1_RTOR6	__REG(0x00209218)  /* Channel 6 Request Time-Out Register 	*/
+#define MX1_BUCR6	__REG(0x00209218)  /* Channel 6 Bus Utilization Control Register 	*/
+
+
+/* Channel 7 */
+
+#define MX1_SAR7	__REG(0x00209240)  /* Channel 7 Source Address Register */
+#define MX1_DAR7	__REG(0x00209244)  /* Channel 7 Destination Address Register 	*/
+#define MX1_CNTR7	__REG(0x00209248)  /* Channel 7 Count Register 		*/
+#define MX1_CCR7	__REG(0x0020924C)  /* Channel 7 Control Register 	*/
+#define MX1_RSSR7	__REG(0x00209250)  /* Channel 7 Request Source Select Register 	*/
+#define MX1_BLR7	__REG(0x00209254)  /* Channel 7 Burst Length  Register 	*/
+#define MX1_RTOR7	__REG(0x00209258)  /* Channel 7 Request Time-Out Register 	*/
+#define MX1_BUCR7	__REG(0x00209258)  /* Channel 7 Bus Utilization Control Register 	*/
+
+
+/* Channel 8 */
+
+#define MX1_SAR8	__REG(0x00209280)  /* Channel 8 Source Address Register */
+#define MX1_DAR8	__REG(0x00209284)  /* Channel 8 Destination Address Register 	*/
+#define MX1_CNTR8	__REG(0x00209288)  /* Channel 8 Count Register 		*/
+#define MX1_CCR8	__REG(0x0020928C)  /* Channel 8 Control Register 	*/
+#define MX1_RSSR8	__REG(0x00209290)  /* Channel 8 Request Source Select Register 	*/
+#define MX1_BLR8	__REG(0x00209294)  /* Channel 8 Burst Length  Register 	*/
+#define MX1_RTOR8	__REG(0x00209298)  /* Channel 8 Request Time-Out Register 	*/
+#define MX1_BUCR8	__REG(0x00209298)  /* Channel 8 Bus Utilization Control Register 	*/
+
+
+/* Channel 9 */
+
+#define MX1_SAR9	__REG(0x002092C0)  /* Channel 9 Source Address Register */
+#define MX1_DAR9	__REG(0x002092C4)  /* Channel 9 Destination Address Register 	*/
+#define MX1_CNTR9	__REG(0x002092C8)  /* Channel 9 Count Register 		*/
+#define MX1_CCR9	__REG(0x002092CC)  /* Channel 9 Control Register 	*/
+#define MX1_RSSR9	__REG(0x002092D0)  /* Channel 9 Request Source Select Register 	*/
+#define MX1_BLR9	__REG(0x002092D4)  /* Channel 9 Burst Length  Register 	*/
+#define MX1_RTOR9	__REG(0x002092D8)  /* Channel 9 Request Time-Out Register 	*/
+#define MX1_BUCR9	__REG(0x002092D8)  /* Channel 9 Bus Utilization Control Register 	*/
+
+
+/* Channel 10 */
+
+#define MX1_SAR10	__REG(0x00209300)  /* Channel 10 Source Address Register */
+#define MX1_DAR10	__REG(0x00209304)  /* Channel 10 Destination Address Register 	*/
+#define MX1_CNTR10	__REG(0x00209308)  /* Channel 10 Count Register 		*/
+#define MX1_CCR10	__REG(0x0020930C)  /* Channel 10 Control Register 	*/
+#define MX1_RSSR10	__REG(0x00209310)  /* Channel 10 Request Source Select Register 	*/
+#define MX1_BLR10	__REG(0x00209314)  /* Channel 10 Burst Length  Register 	*/
+#define MX1_RTOR10	__REG(0x00209318)  /* Channel 10 Request Time-Out Register 	*/
+#define MX1_BUCR10	__REG(0x00209318)  /* Channel 10 Bus Utilization Control Register 	*/
+
+
+#define MX1_TCR		__REG(0x00209340)  /* Test Control Register 		*/
+#define MX1_TFIFOAR	__REG(0x00209344)  /* Test FIFO A  Register 		*/
+#define MX1_TDRR	__REG(0x00209348)  /* Test DMA Request Register 	*/
+#define MX1_TDIPR	__REG(0x0020934C)  /* Test DMA In Progress Register 	*/
+#define MX1_TFIFOBR	__REG(0x00209350)  /* Test FIFO B Register 		*/
+
+
+
+/*
+ *	MX1 SIM registers
+ */
+
+#define MX1_PORT_CNTL	__REG(0x00211000)  /* Port Control Register 		*/
+#define MX1_CNTL	__REG(0x00211004)  /* Control Register	 		*/
+#define MX1_RCV_THRESHOLD __REG(0x00211008)/* Receive Threshold  Register	*/
+#define MX1_ENABLE 	__REG(0x0021100C)  /* Transmit/Receive Enable Register	*/
+#define MX1_XMT_STATUS  __REG(0x00211010)  /* Transmit Status  Register		*/
+#define MX1_RCV_STATUS  __REG(0x00211014)  /* Receive Status  Register		*/
+#define MX1_SIM_INT_MASK  	__REG(0x00211018)  /* Interrupt Mask Register		*/
+#define MX1_XMT_BUF  	__REG(0x0021101C)  /* Port Transmit Buffer Register	*/
+#define MX1_RCV_BUF  	__REG(0x00211020)  /* Receive Buffer Register		*/
+#define MX1_PORT_DETECT __REG(0x00211024)  /* Detect Register			*/
+#define MX1_XMT_THRESHOLD __REG(0x00211028)/* Transmit Threshold Register	*/
+#define MX1_GUARD_CNTL  __REG(0x0021102C)  /* Transmit Guard Control  Register	*/
+#define MX1_OD_CONFIG	__REG(0x00211030)  /* Open-Drain Configuration Control Register	*/
+#define MX1_RESET_CNTL	__REG(0x00211034)  /* Reset  Control Register		*/
+#define MX1_CHAR_WAIT	__REG(0x00211038)  /* Charactor Wait Timer Register	*/
+#define MX1_GPCNT	__REG(0x0021103C)  /* General Purpose Counter  Register	*/
+#define MX1_DIVISOR	__REG(0x00211040)  /* Divisor Register			*/
+
+
+/*
+ *	MX1 USBD registers
+ */
+
+#define MX1_USB_FRAME	__REG(0x00212000)  /* USB Frame Number and Match Register 	*/
+#define MX1_USB_SPEC	__REG(0x00212004)  /* USB Spec & Release Number Register 	*/
+#define MX1_USB_STAT	__REG(0x00212008)  /* USB Status Register	 	*/
+#define MX1_USB_CTRL	__REG(0x0021200C)  /* USB Control Register	 	*/
+#define MX1_USB_DADR	__REG(0x00212010)  /* USB Descriptor RAM Address Register 	*/
+#define MX1_USB_DDAT	__REG(0x00212014)  /* USB Descriptor RAM/Endpoint buffer Data  Register */
+#define MX1_USB_INTR 	__REG(0x00212018)  /* USB Interrupt Status Register 	*/
+#define MX1_USB_MASK 	__REG(0x0021201C)  /* USB Interrupt Mask Register 	*/
+#define MX1_USB_ENAB 	__REG(0x00212024)  /* USB Enable Register 		*/
+
+
+/* Endpoint 0  */
+#define MX1_USB_EP0_STAT __REG(0x00212030) /* Endpoint 0 Status/Control Register	*/
+#define MX1_USB_EP0_INTR __REG(0x00212034) /* Endpoint 0 Interrupt Status  Register	*/
+#define MX1_USB_EP0_MASK __REG(0x00212038) /* Endpoint 0 Interrupt Mask  Register	*/
+#define MX1_USB_EP0_FDAT __REG(0x0021203C) /* Endpoint 0 FIFO Data Register	*/
+#define MX1_USB_EP0_FSTAT __REG(0x00212040) /* Endpoint 0 FIFO Status Register	*/
+#define MX1_USB_EP0_FCTRL __REG(0x00212044) /* Endpoint 0 FIFO Control Register	*/
+#define MX1_USB_EP0_LRFP __REG(0x00212048) /* Endpoint 0 Last Read Frame Pointer Register	*/
+#define MX1_USB_EP0_LWFP __REG(0x0021204C) /* Endpoint 0 Last Write Frame Pointer Register	*/
+#define MX1_USB_EP0_FALRM __REG(0x00212050) /* Endpoint 0 FIFO Alarm  Register	*/
+#define MX1_USB_EP0_FRDP __REG(0x00212054) /* Endpoint 0 FIFO Read Pointer Register	*/
+#define MX1_USB_EP0_FWRP __REG(0x00212058) /* Endpoint 0 FIFO Write Pointer Register	*/
+
+
+/* Endpoint 1  */
+#define MX1_USB_EP1_STAT __REG(0x00212060) /* Endpoint 1 Status/Control Register	*/
+#define MX1_USB_EP1_INTR __REG(0x00212064) /* Endpoint 1 Interrupt Status  Register	*/
+#define MX1_USB_EP1_MASK __REG(0x00212068) /* Endpoint 1 Interrupt Mask  Register	*/
+#define MX1_USB_EP1_FDAT __REG(0x0021206C) /* Endpoint 1 FIFO Data Register	*/
+#define MX1_USB_EP1_FSTAT __REG(0x00212070) /* Endpoint 1 FIFO Status Register	*/
+#define MX1_USB_EP1_FCTRL __REG(0x00212074) /* Endpoint 1 FIFO Control Register	*/
+#define MX1_USB_EP1_LRFP __REG(0x00212078) /* Endpoint 1 Last Read Frame Pointer Register	*/
+#define MX1_USB_EP1_LWFP __REG(0x0021207C) /* Endpoint 1 Last Write Frame Pointer Register	*/
+#define MX1_USB_EP1_FALRM __REG(0x00212080) /* Endpoint 1 FIFO Alarm  Register	*/
+#define MX1_USB_EP1_FRDP __REG(0x00212084) /* Endpoint 1 FIFO Read Pointer Register	*/
+#define MX1_USB_EP1_FWRP __REG(0x00212088) /* Endpoint 1 FIFO Write Pointer Register	*/
+
+
+/* Endpoint 2  */
+#define MX1_USB_EP2_STAT __REG(0x00212090) /* Endpoint 2 Status/Control Register	*/
+#define MX1_USB_EP2_INTR __REG(0x00212094) /* Endpoint 2 Interrupt Status  Register	*/
+#define MX1_USB_EP2_MASK __REG(0x00212098) /* Endpoint 2 Interrupt Mask  Register	*/
+#define MX1_USB_EP2_FDAT __REG(0x0021209C) /* Endpoint 2 FIFO Data Register	*/
+#define MX1_USB_EP2_FSTAT __REG(0x002120A0) /* Endpoint 2 FIFO Status Register	*/
+#define MX1_USB_EP2_FCTRL __REG(0x002120A4) /* Endpoint 2 FIFO Control Register	*/
+#define MX1_USB_EP2_LRFP __REG(0x002120A8) /* Endpoint 2 Last Read Frame Pointer Register	*/
+#define MX1_USB_EP2_LWFP __REG(0x002120AC) /* Endpoint 2 Last Write Frame Pointer Register	*/
+#define MX1_USB_EP2_FALRM __REG(0x002120B0) /* Endpoint 2 FIFO Alarm  Register	*/
+#define MX1_USB_EP2_FRDP __REG(0x002120B4) /* Endpoint 2 FIFO Read Pointer Register	*/
+#define MX1_USB_EP2_FWRP __REG(0x002120B8) /* Endpoint 2 FIFO Write Pointer Register	*/
+
+
+/* Endpoint 3  */
+#define MX1_USB_EP3_STAT __REG(0x002120C0) /* Endpoint 3 Status/Control Register	*/
+#define MX1_USB_EP3_INTR __REG(0x002120C4) /* Endpoint 3 Interrupt Status  Register	*/
+#define MX1_USB_EP3_MASK __REG(0x002120C8) /* Endpoint 3 Interrupt Mask  Register	*/
+#define MX1_USB_EP3_FDAT __REG(0x002120CC) /* Endpoint 3 FIFO Data Register	*/
+#define MX1_USB_EP3_FSTAT __REG(0x002120D0) /* Endpoint 3 FIFO Status Register	*/
+#define MX1_USB_EP3_FCTRL __REG(0x002120D4) /* Endpoint 3 FIFO Control Register	*/
+#define MX1_USB_EP3_LRFP __REG(0x002120D8) /* Endpoint 3 Last Read Frame Pointer Register	*/
+#define MX1_USB_EP3_LWFP __REG(0x002120DC) /* Endpoint 3 Last Write Frame Pointer Register	*/
+#define MX1_USB_EP3_FALRM __REG(0x002120E0) /* Endpoint 3 FIFO Alarm  Register	*/
+#define MX1_USB_EP3_FRDP __REG(0x002120E4) /* Endpoint 3 FIFO Read Pointer Register	*/
+#define MX1_USB_EP3_FWRP __REG(0x002120E8) /* Endpoint 3 FIFO Write Pointer Register	*/
+
+
+
+/* Endpoint 4  */
+#define MX1_USB_EP4_STAT __REG(0x002120F0) /* Endpoint 4 Status/Control Register	*/
+#define MX1_USB_EP4_INTR __REG(0x002120F4) /* Endpoint 4 Interrupt Status  Register	*/
+#define MX1_USB_EP4_MASK __REG(0x002120F8) /* Endpoint 4 Interrupt Mask  Register	*/
+#define MX1_USB_EP4_FDAT __REG(0x002120FC) /* Endpoint 4 FIFO Data Register	*/
+#define MX1_USB_EP4_FSTAT __REG(0x00212100) /* Endpoint 4 FIFO Status Register	*/
+#define MX1_USB_EP4_FCTRL __REG(0x00212104) /* Endpoint 4 FIFO Control Register	*/
+#define MX1_USB_EP4_LRFP __REG(0x00212108) /* Endpoint 4 Last Read Frame Pointer Register	*/
+#define MX1_USB_EP4_LWFP __REG(0x0021210C) /* Endpoint 4 Last Write Frame Pointer Register	*/
+#define MX1_USB_EP4_FALRM __REG(0x00212110) /* Endpoint 4 FIFO Alarm  Register	*/
+#define MX1_USB_EP4_FRDP __REG(0x00212114) /* Endpoint 4 FIFO Read Pointer Register	*/
+#define MX1_USB_EP4_FWRP __REG(0x00212118) /* Endpoint 4 FIFO Write Pointer Register	*/
+
+
+
+/* Endpoint 5  */
+#define MX1_USB_EP5_STAT __REG(0x00212120) /* Endpoint 5 Status/Control Register	*/
+#define MX1_USB_EP5_INTR __REG(0x00212124) /* Endpoint 5 Interrupt Status  Register	*/
+#define MX1_USB_EP5_MASK __REG(0x00212128) /* Endpoint 5 Interrupt Mask  Register	*/
+#define MX1_USB_EP5_FDAT __REG(0x0021212C) /* Endpoint 5 FIFO Data Register	*/
+#define MX1_USB_EP5_FSTAT __REG(0x00212130) /* Endpoint 5 FIFO Status Register	*/
+#define MX1_USB_EP5_FCTRL __REG(0x00212134) /* Endpoint 5 FIFO Control Register	*/
+#define MX1_USB_EP5_LRFP __REG(0x00212138) /* Endpoint 5 Last Read Frame Pointer Register	*/
+#define MX1_USB_EP5_LWFP __REG(0x0021213C) /* Endpoint 5 Last Write Frame Pointer Register	*/
+#define MX1_USB_EP5_FALRM __REG(0x00212140) /* Endpoint 5 FIFO Alarm  Register	*/
+#define MX1_USB_EP5_FRDP __REG(0x00212144) /* Endpoint 5 FIFO Read Pointer Register	*/
+#define MX1_USB_EP5_FWRP __REG(0x00212148) /* Endpoint 5 FIFO Write Pointer Register	*/
+
+
+
+
+/*
+ *	MX1 SPI 1 registers
+ */
+
+#define MX1_RXDATAREG1	__REG(0x00213000)  /* SPI 1 Rx Data Register 		*/
+#define MX1_TXDATAREG1	__REG(0x00213004)  /* SPI 1 Tx Data Register 		*/
+#define MX1_CONTROLREG1	__REG(0x00213008)  /* SPI 1 Control Register 		*/
+#define MX1_INTREG1	__REG(0x0021300C)  /* SPI 1 Interrupt Control/Status Register 	*/
+#define MX1_TESTREG1	__REG(0x00213010)  /* SPI 1 Test Register 		*/
+#define MX1_PERIODREG1	__REG(0x00213014)  /* SPI 1 Sample Period Control Register 	*/
+#define MX1_DMAREG1	__REG(0x00213018)  /* SPI 1 DMA Control  Register 	*/
+#define MX1_RESETREG1	__REG(0x00213018)  /* SPI 1 Soft Reset Register 	*/
+
+
+
+
+/*
+ *	MX1 MMC/SDHC registers
+ */
+
+#define MX1_STR_STP_CLK	__REG(0x00214000)  /* MMC/SD Clock Control Register	*/
+#define MX1_STATUS 	__REG(0x00214004)  /* MMC/SD Status Register		*/
+#define MX1_CLK_RATE 	__REG(0x00214008)  /* MMC/SD Clock Rate Register	*/
+#define MX1_CMD_DAT_CONT __REG(0x0021400C)  /* MMC/SD Command & Data Control Register	*/
+#define MX1_RES_TO	__REG(0x00214010)  /* MMC/SD Response Time Out Register	*/
+#define MX1_READ_TO	__REG(0x00214014)  /* MMC/SD Read Time Out Register	*/
+#define MX1_BLK_LEN	__REG(0x00214018)  /* MMC/SD Block Length Register	*/
+#define MX1_NOB		__REG(0x0021401C)  /* MMC/SD Number of Block Register	*/
+#define MX1_REV_NO	__REG(0x00214020)  /* MMC/SD Revision Number Register	*/
+#define MX1_MMC_INT_MASK	__REG(0x00214024)  /* MMC/SD Interrupt Mask Register	*/
+#define MX1_CMD 	__REG(0x00214028)  /* MMC/SD Command Number Register	*/
+#define MX1_ARGH 	__REG(0x0021402C)  /* MMC/SD Higher Argument Register	*/
+#define MX1_ARGL 	__REG(0x00214030)  /* MMC/SD Lower Argument Register	*/
+#define MX1_RES_FIFO 	__REG(0x00214034)  /* MMC/SD Response FIFO Register	*/
+#define MX1_BUFFER_ACCESS __REG(0x00214038)  /* MMC/SD Buffer Access Register	*/
+
+
+
+/*
+ *	MX1 ASP registers
+ */
+
+#define MX1_ASP_PADFIFO	__REG(0x00215000)  /* Pen Sample FIFO 			*/
+#define MX1_ASP_VADFIFO	__REG(0x00215004)  /* Voice ADC Register 		*/
+#define MX1_ASP_VDAFIFO	__REG(0x00215008)  /* Voice DAC Register 		*/
+#define MX1_ASP_VADCOEF	__REG(0x0021500C)  /* Voice ADC FIR Coefficients RAM 	*/
+#define MX1_ASP_ACNTLCR	__REG(0x00215010)  /* Control Register 		 	*/
+#define MX1_ASP_PSMPLRG	__REG(0x00215014)  /* Pen A/D Sample Rate Control Register 	*/
+#define MX1_ASP_ICNTLR	__REG(0x00215018)  /* Interrupt Control Register 	*/
+#define MX1_ASP_ISTATR	__REG(0x0021501C)  /* Interrupt/Error Status Register 	*/
+#define MX1_ASP_VADGAIN	__REG(0x00215020)  /* Voice ADC Control Register  	*/
+#define MX1_ASP_VDAGAIN	__REG(0x00215024)  /* Voice DAC Control Register  	*/
+#define MX1_ASP_VDACOEF	__REG(0x00215028)  /* Voice DAC FIR Coefficients RAM   	*/
+#define MX1_ASP_CLKDIV	__REG(0x0021502C)  /* Clock Divide Register 	   	*/
+#define MX1_ASP_CMPCNTL	__REG(0x0021502C)  /* Compare Control Register 	   	*/
+
+
+
+/*
+ *	MX1 BTA registers
+ */
+
+
+/*
+ *	MX1 I2C registers
+ */
+
+#define MX1_IADR	__REG(0x00217000)  /* I2C Address Register 		*/
+#define MX1_IFDR	__REG(0x00217004)  /* I2C Frequency Divider Register 	*/
+#define MX1_I2CR	__REG(0x00217008)  /* I2C Control Register   		*/
+#define MX1_I2CSR	__REG(0x0021700C)  /* I2C Status Register   		*/
+#define MX1_I2DR	__REG(0x00217010)  /* I2C Data I/O Register  		*/
+
+
+
+/*
+ *	MX1 SSI registers
+ */
+
+#define MX1_STX		__REG(0x00218000)  /* SSI Transmit Data Register 	*/
+#define MX1_SRX		__REG(0x00218004)  /* SSI Receive Data Register 	*/
+#define MX1_SCSR	__REG(0x00218008)  /* SSI Control/Status Register 	*/
+#define MX1_STCR	__REG(0x0021800C)  /* SSI Transmit Configuration Register 	*/
+#define MX1_SRCR	__REG(0x00218010)  /* SSI Recieve Configuration Register 	*/
+#define MX1_STCCR	__REG(0x00218014)  /* SSI Transmit Clock Control Register 	*/
+#define MX1_SRCCR	__REG(0x00218018)  /* SSI Receive Clock Control Register 	*/
+#define MX1_STSR	__REG(0x0021801C)  /* SSI Time Slot Register 		*/
+#define MX1_SFCSR	__REG(0x00218020)  /* SSI FIFO Control/Status Register 	*/
+#define MX1_SOR		__REG(0x00218024)  /* SSI Option Register 		*/
+
+
+
+/*
+ *	MX1 SPI 2 registers
+ */
+
+#define MX1_RXDATAREG2	__REG(0x00219000)  /* SPI 2 Rx Data Register 		*/
+#define MX1_TXDATAREG2	__REG(0x00219004)  /* SPI 2 Tx Data Register 		*/
+#define MX1_CONTROLREG2	__REG(0x00219008)  /* SPI 2 Control Register 		*/
+#define MX1_INTREG2	__REG(0x0021900C)  /* SPI 2 Interrupt Control/Status Register 	*/
+#define MX1_TESTREG2	__REG(0x00219010)  /* SPI 2 Test Register 		*/
+#define MX1_PERIODREG2	__REG(0x00219014)  /* SPI 2 Sample Period Control Register 	*/
+#define MX1_DMAREG2	__REG(0x00219018)  /* SPI 2 DMA Control  Register 	*/
+#define MX1_RESETREG2	__REG(0x00219018)  /* SPI 2 Soft Reset Register 	*/
+
+
+
+/*
+ *	MX1 MSHC registers
+ */
+
+#define MX1_MSCMD	__REG(0x0021A000)  /* Memory Stick Command Register 	*/
+#define MX1_MSCS	__REG(0x0021A002)  /* Memory Stick Control/Status Register 	*/
+#define MX1_MSTDATA	__REG(0x0021A004)  /* Memory Stick Transmit FIFO Data Register 	*/
+#define MX1_MSRDATA	__REG(0x0021A004)  /* Memory Stick Recieve FIFO Data Register 	*/
+#define MX1_MSICS	__REG(0x0021A006)  /* Memory Stick Interrupt Control/Status Register 	*/
+#define MX1_MSPPCD	__REG(0x0021A008)  /* Memory Stick Parallel Port Control/Data Register 	*/
+#define MX1_MSC2	__REG(0x0021A00A)  /* Memory Stick Control 2 Register 	*/
+#define MX1_MSACD	__REG(0x0021A00C)  /* Memory Stick Auto Command Register 	*/
+#define MX1_MSFAECS 	__REG(0x0021A00E)  /* Memory Stick FIFO Access Error Control/Status Register 	*/
+#define MX1_MSCLKD 	__REG(0x0021A010)  /* Memory Stick Serial Clock divider Register 	*/
+#define MX1_MSDRQC 	__REG(0x0021A012)  /* Memory Stick DMA Request Control Register */
+
+
+
+/*
+ *	MX1 PLLCLK registers
+ */
+
+#define MX1_CSCR	__REG(0x0021B000)  /* Clock Source Control Register 	*/
+#define MX1_MPCTL0	__REG(0x0021B004)  /* MCU PLL Control Register 0 	*/
+#define MX1_MPCTL1	__REG(0x0021B008)  /* MCU PLL & System Clock Control Register 1 */
+#define MX1_UPCTL0	__REG(0x0021B00C)  /* USB PLL Control Register 0	*/
+#define MX1_UPCTL1	__REG(0x0021B010)  /* USB PLL Control Register 1	*/
+#define MX1_PCDR	__REG(0x0021B020)  /* Peripheral Clock Divider Register	*/
+
+
+/*
+ *	MX1 RESET registers
+ */
+
+#define MX1_RSR		__REG(0x0021B800)  /* Reset Source Register 		*/
+
+
+
+/*
+ *	MX1 SYS CTRL registers
+ */
+
+#define MX1_SIDR	__REG(0x0021B804)  /* Silicon ID Register 		*/
+#define MX1_FMCR	__REG(0x0021B808)  /* Function MultiPlexing Control Register 	*/
+#define MX1_GPCR	__REG(0x0021B80C)  /* Global Peripheral Control Register 	*/
+
+
+/*
+ *	MX1 GPIO registers
+ */
+
+/* Port A */
+#define MX1_DDIR_A	__REG(0x0021C000)  /* Port A Data Direction Register 	*/
+#define MX1_OCR1_A	__REG(0x0021C004)  /* Port A Output Configuration Register 1	*/
+#define MX1_OCR2_A	__REG(0x0021C008)  /* Port A Output Configuration Register 2	*/
+#define MX1_ICONFA1_A	__REG(0x0021C00C)  /* Port A Input Configuration Register A1	*/
+#define MX1_ICONFA2_A	__REG(0x0021C010)  /* Port A Input Configuration Register A2	*/
+#define MX1_ICONFB1_A	__REG(0x0021C014)  /* Port A Input Configuration Register B1	*/
+#define MX1_ICONFB2_A	__REG(0x0021C018)  /* Port A Input Configuration Register B2	*/
+#define MX1_DR_A	__REG(0x0021C01C)  /* Port A Data Register 		*/
+#define MX1_GIUS_A	__REG(0x0021C020)  /* Port A GPIO In Use Register 	*/
+#define MX1_SSR_A	__REG(0x0021C024)  /* Port A Sample Status Register 	*/
+#define MX1_ICR1_A	__REG(0x0021C028)  /* Port A Interrupt Configuration Register 1	*/
+#define MX1_ICR2_A	__REG(0x0021C02C)  /* Port A Interrupt Configuration Register 2	*/
+#define MX1_IMR_A	__REG(0x0021C030)  /* Port A Interrupt Mask Register	*/
+#define MX1_ISR_A	__REG(0x0021C034)  /* Port A Interrupt Status Register	*/
+#define MX1_GPR_A	__REG(0x0021C038)  /* Port A General Purpose Register	*/
+#define MX1_SWR_A	__REG(0x0021C03C)  /* Port A Software Reset Register	*/
+#define MX1_PUEN_A	__REG(0x0021C040)  /* Port A Pull Up Enable Register	*/
+
+
+/* Port B */
+#define MX1_DDIR_B	__REG(0x0021C100)  /* Port B Data Direction Register 	*/
+#define MX1_OCR1_B	__REG(0x0021C104)  /* Port B Output Configuration Register 1	*/
+#define MX1_OCR2_B	__REG(0x0021C108)  /* Port B Output Configuration Register 2	*/
+#define MX1_ICONFA1_B	__REG(0x0021C10C)  /* Port B Input Configuration Register A1	*/
+#define MX1_ICONFA2_B	__REG(0x0021C110)  /* Port B Input Configuration Register A2	*/
+#define MX1_ICONFB1_B	__REG(0x0021C114)  /* Port B Input Configuration Register B1	*/
+#define MX1_ICONFB2_B	__REG(0x0021C118)  /* Port B Input Configuration Register B2	*/
+#define MX1_DR_B	__REG(0x0021C11C)  /* Port B Data Register 		*/
+#define MX1_GIUS_B	__REG(0x0021C120)  /* Port B GPIO In Use Register 	*/
+#define MX1_SSR_B	__REG(0x0021C124)  /* Port B Sample Status Register 	*/
+#define MX1_ICR1_B	__REG(0x0021C128)  /* Port B Interrupt Configuration Register 1	*/
+#define MX1_ICR2_B	__REG(0x0021C12C)  /* Port B Interrupt Configuration Register 2	*/
+#define MX1_IMR_B	__REG(0x0021C130)  /* Port B Interrupt Mask Register	*/
+#define MX1_ISR_B	__REG(0x0021C134)  /* Port B Interrupt Status Register	*/
+#define MX1_GPR_B	__REG(0x0021C138)  /* Port B General Purpose Register	*/
+#define MX1_SWR_B	__REG(0x0021C13C)  /* Port B Software Reset Register	*/
+#define MX1_PUEN_B	__REG(0x0021C140)  /* Port B Pull Up Enable Register	*/
+
+
+
+/* Port C */
+#define MX1_DDIR_C	__REG(0x0021C200)  /* Port C Data Direction Register 	*/
+#define MX1_OCR1_C	__REG(0x0021C204)  /* Port C Output Configuration Register 1	*/
+#define MX1_OCR2_C	__REG(0x0021C208)  /* Port C Output Configuration Register 2	*/
+#define MX1_ICONFA1_C	__REG(0x0021C20C)  /* Port C Input Configuration Register A1	*/
+#define MX1_ICONFA2_C	__REG(0x0021C210)  /* Port C Input Configuration Register A2	*/
+#define MX1_ICONFB1_C	__REG(0x0021C214)  /* Port C Input Configuration Register B1	*/
+#define MX1_ICONFB2_C	__REG(0x0021C218)  /* Port C Input Configuration Register B2	*/
+#define MX1_DR_C	__REG(0x0021C21C)  /* Port C Data Register 		*/
+#define MX1_GIUS_C	__REG(0x0021C220)  /* Port C GPIO In Use Register 	*/
+#define MX1_SSR_C	__REG(0x0021C224)  /* Port C Sample Status Register 	*/
+#define MX1_ICR1_C	__REG(0x0021C228)  /* Port C Interrupt Configuration Register 1	*/
+#define MX1_ICR2_C	__REG(0x0021C22C)  /* Port C Interrupt Configuration Register 2	*/
+#define MX1_IMR_C	__REG(0x0021C230)  /* Port C Interrupt Mask Register	*/
+#define MX1_ISR_C	__REG(0x0021C234)  /* Port C Interrupt Status Register	*/
+#define MX1_GPR_C	__REG(0x0021C238)  /* Port C General Purpose Register	*/
+#define MX1_SWR_C	__REG(0x0021C23C)  /* Port C Software Reset Register	*/
+#define MX1_PUEN_C	__REG(0x0021C240)  /* Port C Pull Up Enable Register	*/
+
+
+
+/* Port D */
+#define MX1_DDIR_D	__REG(0x0021C300)  /* Port D Data Direction Register 	*/
+#define MX1_OCR1_D	__REG(0x0021C304)  /* Port D Output Configuration Register 1	*/
+#define MX1_OCR2_D	__REG(0x0021C308)  /* Port D Output Configuration Register 2	*/
+#define MX1_ICONFA1_D	__REG(0x0021C30C)  /* Port D Input Configuration Register A1	*/
+#define MX1_ICONFA2_D	__REG(0x0021C310)  /* Port D Input Configuration Register A2	*/
+#define MX1_ICONFB1_D	__REG(0x0021C314)  /* Port D Input Configuration Register B1	*/
+#define MX1_ICONFB2_D	__REG(0x0021C318)  /* Port D Input Configuration Register B2	*/
+#define MX1_DR_D	__REG(0x0021C31C)  /* Port D Data Register 		*/
+#define MX1_GIUS_D	__REG(0x0021C320)  /* Port D GPIO In Use Register 	*/
+#define MX1_SSR_D	__REG(0x0021C324)  /* Port D Sample Status Register 	*/
+#define MX1_ICR1_D	__REG(0x0021C328)  /* Port D Interrupt Configuration Register 1	*/
+#define MX1_ICR2_D	__REG(0x0021C32C)  /* Port D Interrupt Configuration Register 2	*/
+#define MX1_IMR_D	__REG(0x0021C330)  /* Port D Interrupt Mask Register	*/
+#define MX1_ISR_D	__REG(0x0021C334)  /* Port D Interrupt Status Register	*/
+#define MX1_GPR_D	__REG(0x0021C338)  /* Port D General Purpose Register	*/
+#define MX1_SWR_D	__REG(0x0021C33C)  /* Port D Software Reset Register	*/
+#define MX1_PUEN_D	__REG(0x0021C340)  /* Port D Pull Up Enable Register	*/
+
+
+
+/*
+ *	MX1 EIM registers
+ */
+
+#define MX1_CS0U	__REG(0x00220000)  /* Chip Select 0 Upper Control Register 	*/
+#define MX1_CS0L	__REG(0x00220004)  /* Chip Select 0 Lower Control Register 	*/
+#define MX1_CS1U	__REG(0x00220008)  /* Chip Select 1 Upper Control Register 	*/
+#define MX1_CS1L	__REG(0x0022000C)  /* Chip Select 1 Lower Control Register 	*/
+#define MX1_CS2U	__REG(0x00220010)  /* Chip Select 2 Upper Control Register 	*/
+#define MX1_CS2L	__REG(0x00220014)  /* Chip Select 2 Lower Control Register 	*/
+#define MX1_CS3U	__REG(0x00220018)  /* Chip Select 3 Upper Control Register 	*/
+#define MX1_CS3L	__REG(0x0022001C)  /* Chip Select 3 Lower Control Register 	*/
+#define MX1_CS4U	__REG(0x00220020)  /* Chip Select 4 Upper Control Register 	*/
+#define MX1_CS4L	__REG(0x00220024)  /* Chip Select 4 Lower Control Register 	*/
+#define MX1_CS5U	__REG(0x00220028)  /* Chip Select 5 Upper Control Register 	*/
+#define MX1_CS5L	__REG(0x0022002C)  /* Chip Select 5 Lower Control Register 	*/
+#define MX1_WEIM	__REG(0x00220030)  /* weim cONFIGURATION Register 	*/
+
+
+
+/*
+ *	MX1 SDRAMC registers
+ */
+
+#define MX1_SDCTL0	__REG(0x00221000)  /* SDRAM 0 Control Register 		*/
+#define MX1_SDCTL1	__REG(0x00221004)  /* SDRAM 1 Control Register 		*/
+#define MX1_MISCELLANEOUS __REG(0x00221014)  /* Miscellaneous Register 		*/
+#define MX1_SDRST	__REG(0x00221018)  /* SDRAM Reset Register 		*/
+
+
+
+/*
+ *	MX1 MMA registers
+ */
+
+#define MX1_MMA_MAC_MOD	__REG(0x00222000)  /* MMA MAC Module Register 		*/
+#define MX1_MMA_MAC_CTRL __REG(0x00222004)  /* MMA MAC Control Register 	*/
+#define MX1_MMA_MAC_MULT __REG(0x00222008)  /* MMA MAC Multiply Counter Register 	*/
+#define MX1_MMA_MAC_ACCU __REG(0x0022200C)  /* MMA MAC Accumulate Counter Register 	*/
+#define MX1_MMA_MAC_INTR __REG(0x00222010)  /* MMA MAC Interrupt Register 	*/
+#define MX1_MMA_MAC_INTR_MASK __REG(0x00222014)  /* MMA MAC Interrupt Mask Register 	*/
+#define MX1_MMA_MAC_FIFO __REG(0x00222018)  /* MMA MAC FIFO Register	 	*/
+#define MX1_MMA_MAC_FIFO_STAT __REG(0x0022201C)  /* MMA MAC FIFO Status Register 	*/
+#define MX1_MMA_MAC_BURST __REG(0x00222020)  /* MMA MAC Burst Count Register 	*/
+#define MX1_MMA_MAC_BITSEL __REG(0x00222024)  /* MMA MAC Bit Select Register 	*/
+
+#define MX1_MMA_MAC_XBASE __REG(0x00222200)  /* MMA MAC X Base Address Register */
+#define MX1_MMA_MAC_XINDEX __REG(0x00222204)  /* MMA MAC X Index Register 	*/
+#define MX1_MMA_MAC_XLENGTH __REG(0x00222208)  /* MMA MAC X Length Register 	*/
+#define MX1_MMA_MAC_XMODIFY __REG(0x0022220C)  /* MMA MAC X Modify Register 	*/
+#define MX1_MMA_MAC_XINCR __REG(0x00222210)  /* MMA MAC X Increment Register 	*/
+#define MX1_MMA_MAC_XCOUNT __REG(0x00222214)  /* MMA MAC X Count Register 	*/
+
+
+#define MX1_MMA_MAC_YBASE __REG(0x00222300)  /* MMA MAC Y Base Address Register */
+#define MX1_MMA_MAC_YINDEX __REG(0x00222304)  /* MMA MAC Y Index Register 	*/
+#define MX1_MMA_MAC_YLENGTH __REG(0x00222308)  /* MMA MAC Y Length Register 	*/
+#define MX1_MMA_MAC_YMODIFY __REG(0x0022230C)  /* MMA MAC Y Modify Register 	*/
+#define MX1_MMA_MAC_YINCR __REG(0x00222310)  /* MMA MAC Y Increment Register 	*/
+#define MX1_MMA_MAC_YCOUNT __REG(0x00222314)  /* MMA MAC Y Count Register 	*/
+
+
+#define MX1_MMA_DCTCTRL __REG(0x00222400)  /* DCT/iDCT Control Register 	*/
+#define MX1_MMA_DCTVERSION __REG(0x00222404)  /* DCT/iDCT Version Register 	*/
+#define MX1_MMA_DCTIRQENA __REG(0x00222408)  /* DCT/iDCT IRQ Enable Register 	*/
+#define MX1_MMA_DCTIRQSTAT __REG(0x0022240C)  /* DCT/iDCT IRQ Status Register 	*/
+#define MX1_MMA_DCTSRCDATA __REG(0x00222410)  /* DCT/iDCT Source Data Address  	*/
+#define MX1_MMA_DCTDESDATA __REG(0x00222414)  /* DCT/iDCT Destination Data Address  	*/
+#define MX1_MMA_DCTXOFF	__REG(0x00222418)  /* DCT/iDCT X-Offset Address  	*/
+#define MX1_MMA_DCTYOFF	__REG(0x0022241C)  /* DCT/iDCT Y-Offset Address  	*/
+#define MX1_MMA_DCTXYCNT __REG(0x00222420)  /* DCT/iDCT XY Count 	  	*/
+#define MX1_MMA_DCTSKIP __REG(0x00222424)  /* DCT/iDCT Skip Address  	  	*/
+#define MX1_MMA_DCTFIFO __REG(0x00222500)  /* DCT/iDCT Data FIFO  	  	*/
+
+
+
+
+/*
+ *	MX1 AITC registers
+ */
+
+#define MX1_INTCNTL	__REG(0x00223000)  /* Interrupt Control Register 	*/
+#define MX1_NIMASK	__REG(0x00223004)  /* Normal Interrupt Mask Register 	*/
+#define MX1_INTENNUM	__REG(0x00223008)  /* Interrupt Enable Number Register 	*/
+#define MX1_INTDISNUM	__REG(0x0022300C)  /* Interrupt Disable Number Register	*/
+#define MX1_INTENABLEH	__REG(0x00223010)  /* Interrupt Enable Register High 	*/
+#define MX1_INTENABLEL	__REG(0x00223014)  /* Interrupt Enable Register Low 	*/
+#define MX1_INTTYPEH	__REG(0x00223018)  /* Interrupt Type Register High 	*/
+#define MX1_INTTYPEL	__REG(0x0022301C)  /* Interrupt Type Register Low 	*/
+#define MX1_NIPRIORITY7	__REG(0x00223020)  /* Normal Interrupt Priority Level Register 7*/
+#define MX1_NIPRIORITY6	__REG(0x00223024)  /* Normal Interrupt Priority Level Register 6*/
+#define MX1_NIPRIORITY5	__REG(0x00223028)  /* Normal Interrupt Priority Level Register 5*/
+#define MX1_NIPRIORITY4	__REG(0x0022302C)  /* Normal Interrupt Priority Level Register 4*/
+#define MX1_NIPRIORITY3	__REG(0x00223030)  /* Normal Interrupt Priority Level Register 3*/
+#define MX1_NIPRIORITY2	__REG(0x00223034)  /* Normal Interrupt Priority Level Register 2*/
+#define MX1_NIPRIORITY1	__REG(0x00223038)  /* Normal Interrupt Priority Level Register 1*/
+#define MX1_NIPRIORITY0	__REG(0x0022303C)  /* Normal Interrupt Priority Level Register 0*/
+#define MX1_NIVECSR	__REG(0x00223040)  /* Normal Interrupt Vector & Status Register */
+#define MX1_FIVECSR	__REG(0x00223044)  /* Fast Interrupt Vector & Status Register	*/
+#define MX1_INTSRCH	__REG(0x00223048)  /* Interrupt Source Register High 	*/
+#define MX1_INTSRCL	__REG(0x0022304C)  /* Interrupt Source Register Low 	*/
+#define MX1_INTFRCH	__REG(0x00223050)  /* Interrupt Force Register High 	*/
+#define MX1_INTFRCL	__REG(0x00223054)  /* Interrupt Force Register Low 	*/
+#define MX1_NIPNDH	__REG(0x00223058)  /* Normal Interrupt Pending Register High 	*/
+#define MX1_NIPNDL	__REG(0x0022305C)  /* Normal Interrupt Pending Register Low 	*/
+#define MX1_FIPNDH	__REG(0x00223060)  /* Fast Interrupt Pending Register High 	*/
+#define MX1_FIPNDL	__REG(0x00223064)  /* Fast Interrupt Pending Register Low 	*/
+
+
+/*
+ *	MX1 CSI registers
+ */
+
+#define MX1_CSICR1	__REG(0x00224000)  /* CSI Control Register 1	 	*/
+#define MX1_CSICR2	__REG(0x00224004)  /* CSI Control Register 2	 	*/
+#define MX1_CSISR	__REG(0x00224008)  /* CSI Status Register 1	 	*/
+#define MX1_CSISTATR	__REG(0x0022400C)  /* CSI Statistic FIFO Register 1	*/
+#define MX1_CSIRXR	__REG(0x00224010)  /* CSI RxFIFO Register 1		*/
+
+
+
+#endif	/*  __MC9328_H__ */
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#if 0
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+/*
+	MX1 dma definition 
+*/
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+//#define MAX_DMA_CHANNELS	0
+
+#define MAX_DMA_CHANNELS 		11
+#define MAX_DMA_2D_REGSET		2
+
+/* MX1 DMA module registers' address */
+
+#define	MX1_DMA_BASE		IO_ADDRESS(0x00209000)
+#define	MX1_DMA_DCR		(MX1_DMA_BASE + 0x00)		// DMA control register
+#define	MX1_DMA_DISR		(MX1_DMA_BASE + 0x04)		// DMA interrupt status register
+#define	MX1_DMA_DIMR		(MX1_DMA_BASE + 0x08)		// DMA interrupt mask register
+#define	MX1_DMA_DBTOSR		(MX1_DMA_BASE + 0x0C)		// DMA burst time-out status register
+#define	MX1_DMA_DRTOSR		(MX1_DMA_BASE + 0x10)		// DMA request time-out status register
+#define	MX1_DMA_DSESR		(MX1_DMA_BASE + 0x14)		// DMA transfer error status register
+#define	MX1_DMA_DBOSR		(MX1_DMA_BASE + 0x18)		// DMA buffer overflow status register
+#define	MX1_DMA_DBTOCR		(MX1_DMA_BASE + 0x1C)		// DMA burst time-out control register
+#define	MX1_DMA_WSRA		(MX1_DMA_BASE + 0x40)		// W-size register A
+#define	MX1_DMA_XSRA		(MX1_DMA_BASE + 0x44)		// X-size register A
+#define	MX1_DMA_YSRA		(MX1_DMA_BASE + 0x48)		// Y-size register A
+#define	MX1_DMA_WSRB		(MX1_DMA_BASE + 0x4C)		// W-size register B
+#define	MX1_DMA_XSRB		(MX1_DMA_BASE + 0x50)		// X-size register B
+#define	MX1_DMA_YSRB		(MX1_DMA_BASE + 0x54)		// Y-size register B
+
+#define	MX1_DMA_SAR0		(MX1_DMA_BASE + 0x80)		// source address register 0
+#define	MX1_DMA_DAR0		(MX1_DMA_BASE + 0x84)		// destination address register 0
+#define	MX1_DMA_CNTR0		(MX1_DMA_BASE + 0x88)		// count register 0
+#define	MX1_DMA_CCR0		(MX1_DMA_BASE + 0x8C)		// channel control register 0
+#define	MX1_DMA_RSSR0		(MX1_DMA_BASE + 0x90)		// request source select register 0
+#define	MX1_DMA_BLR0		(MX1_DMA_BASE + 0x94)		// burst length register 0
+#define	MX1_DMA_RTOR0		(MX1_DMA_BASE + 0x98)		// request time-out register 0
+#define	MX1_DMA_BUCR0		(MX1_DMA_BASE + 0x98)		// bus utilization control register 0
+
+/* register set 1 to 10 are offseted by 0x40 each = 0x10 pointers away */
+
+#define	DMA_REG_SET_OFS		0x10
+
+
+/* MX1 DMA module registers */
+#define	_reg_DMA_DCR		(*((P_VU32)MX1_DMA_DCR))
+#define	_reg_DMA_DISR		(*((P_VU32)MX1_DMA_DISR))
+#define	_reg_DMA_DIMR		(*((P_VU32)MX1_DMA_DIMR))
+#define	_reg_DMA_DBTOSR		(*((P_VU32)MX1_DMA_DBTOSR))
+#define	_reg_DMA_DRTOSR		(*((P_VU32)MX1_DMA_DRTOSR))
+#define	_reg_DMA_DSESR		(*((P_VU32)MX1_DMA_DSESR))
+#define	_reg_DMA_DBOSR		(*((P_VU32)MX1_DMA_DBOSR))
+#define	_reg_DMA_DBTOCR		(*((P_VU32)MX1_DMA_DBTOCR))	
+#define	_reg_DMA_WSRA		(*((P_VU32)MX1_DMA_WSRA))
+#define	_reg_DMA_XSRA		(*((P_VU32)MX1_DMA_XSRA))
+#define	_reg_DMA_YSRA		(*((P_VU32)MX1_DMA_YSRA))
+#define	_reg_DMA_WSRB		(*((P_VU32)MX1_DMA_WSRB))
+#define	_reg_DMA_XSRB		(*((P_VU32)MX1_DMA_XSRB))
+#define	_reg_DMA_YSRB		(*((P_VU32)MX1_DMA_YSRB))
+#define	_reg_DMA_SAR0		(*((P_VU32)MX1_DMA_SAR0))
+#define	_reg_DMA_DAR0		(*((P_VU32)MX1_DMA_DAR0))
+#define	_reg_DMA_CNTR0		(*((P_VU32)MX1_DMA_CNTR0))
+#define	_reg_DMA_CCR0		(*((P_VU32)MX1_DMA_CCR0))
+#define	_reg_DMA_RSSR0		(*((P_VU32)MX1_DMA_RSSR0))
+#define	_reg_DMA_BLR0		(*((P_VU32)MX1_DMA_BLR0))
+#define	_reg_DMA_RTOR0		(*((P_VU32)MX1_DMA_RTOR0))
+#define	_reg_DMA_BUCR0		(*((P_VU32)MX1_DMA_BUCR0))
+
+/*  DMA error type definition */
+#define	MX1_DMA_ERR_BTO		0	// burst time-out
+#define	MX1_DMA_ERR_RTO		1	// request time-out
+#define	MX1_DMA_ERR_TE		2	// transfer error
+#define	MX1_DMA_ERR_BO		3	// buffer overflow
+
+
+/* Embedded SRAM */
+
+#define MX1_SRAM_BASE		0x00300000
+#define MX1_SRAM_SIZE		0x00020000
+
+#define 
+
+
+#define MX1ADS_SFLASH_BASE         0x0C000000
+#define MX1ADS_SFLASH_SIZE         SZ_16M
+
+#define MX1ADS_IO_BASE             0x00200000
+#define MX1ADS_IO_SIZE             SZ_256K
+
+#define MX1ADS_VID_BASE            0x00300000
+#define MX1ADS_VID_SIZE            0x26000
+
+#define MX1ADS_VID_START           IO_ADDRESS(MX1ADS_VID_BASE)
+
+#define	MX1_GPIO_BASE				0x0021C000	// GPIO
+#define	MX1_EXT_UART_BASE			0x15000000	// external UART
+#define	MX1_TMR1_BASE				0x00202000	// Timer1
+#define 	MX1ADS_FLASH_BASE			0x0C000000	// sync FLASH
+#define	MX1_ESRAM_BASE				0x00300000	// embedded SRAM
+#define	MX1ADS_SDRAM_DISK_BASE	0x0B000000	// SDRAM disk base (last 16M of SDRAM)
+
+/* ------------------------------------------------------------------------
+ *  Motorola MX1 system registers
+ * ------------------------------------------------------------------------
+ *
+ */
+
+/*
+ *  Register offests.
+ *
+ */
+
+#define MX1ADS_AIPI1_OFFSET             0x00000
+#define MX1ADS_WDT_OFFSET               0x01000
+#define MX1ADS_TIM1_OFFSET              0x02000
+#define MX1ADS_TIM2_OFFSET              0x03000
+#define MX1ADS_RTC_OFFSET               0x04000
+#define MX1ADS_LCDC_OFFSET              0x05000
+#define MX1ADS_UART1_OFFSET             0x06000
+#define MX1ADS_UART2_OFFSET             0x07000
+#define MX1ADS_PWM_OFFSET               0x08000
+#define MX1ADS_DMAC_OFFSET              0x09000
+#define MX1ADS_AIPI2_OFFSET             0x10000
+#define MX1ADS_SIM_OFFSET               0x11000
+#define MX1ADS_USBD_OFFSET              0x12000
+#define MX1ADS_SPI1_OFFSET              0x13000
+#define MX1ADS_MMC_OFFSET               0x14000
+#define MX1ADS_ASP_OFFSET               0x15000
+#define MX1ADS_BTA_OFFSET               0x16000
+#define MX1ADS_I2C_OFFSET               0x17000
+#define MX1ADS_SSI_OFFSET               0x18000
+#define MX1ADS_SPI2_OFFSET              0x19000
+#define MX1ADS_MSHC_OFFSET              0x1A000
+#define MX1ADS_PLL_OFFSET               0x1B000
+#define MX1ADS_GPIO_OFFSET              0x1C000
+#define MX1ADS_EIM_OFFSET               0x20000
+#define MX1ADS_SDRAMC_OFFSET            0x21000
+#define MX1ADS_MMA_OFFSET               0x22000
+#define MX1ADS_AITC_OFFSET              0x23000
+#define MX1ADS_CSI_OFFSET               0x24000
+
+
+/*
+ *  Register BASEs, based on OFFSETs
+ *
+ */
+
+#define MX1ADS_AIPI1_BASE             (MX1ADS_AIPI1_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_WDT_BASE               (MX1ADS_WDT_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_TIM1_BASE              (MX1ADS_TIM1_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_TIM2_BASE              (MX1ADS_TIM2_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_RTC_BASE               (MX1ADS_RTC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_LCDC_BASE              (MX1ADS_LCDC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_UART1_BASE             (MX1ADS_UART1_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_UART2_BASE             (MX1ADS_UART2_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_PWM_BASE               (MX1ADS_PWM_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_DMAC_BASE              (MX1ADS_DMAC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_AIPI2_BASE             (MX1ADS_AIPI2_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_SIM_BASE               (MX1ADS_SIM_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_USBD_BASE              (MX1ADS_USBD_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_SPI1_BASE              (MX1ADS_SPI1_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_MMC_BASE               (MX1ADS_MMC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_ASP_BASE               (MX1ADS_ASP_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_BTA_BASE               (MX1ADS_BTA_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_I2C_BASE               (MX1ADS_I2C_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_SSI_BASE               (MX1ADS_SSI_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_SPI2_BASE              (MX1ADS_SPI2_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_MSHC_BASE              (MX1ADS_MSHC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_PLL_BASE               (MX1ADS_PLL_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_GPIO_BASE              (MX1ADS_GPIO_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_EIM_BASE               (MX1ADS_EIM_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_SDRAMC_BASE            (MX1ADS_SDRAMC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_MMA_BASE               (MX1ADS_MMA_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_AITC_BASE              (MX1ADS_AITC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_CSI_BASE               (MX1ADS_CSI_OFFSET + MX1ADS_IO_BASE)
+
+
+/*
+ *  MX1 Interrupt numbers
+ *
+ */
+#define INT_SOFTINT                 0
+#define CSI_INT                     6
+#define DSPA_MAC_INT                7
+#define DSPA_INT                    8
+#define COMP_INT                    9
+#define MSHC_XINT                   10
+#define GPIO_INT_PORTA              11
+#define GPIO_INT_PORTB              12
+#define GPIO_INT_PORTC              13
+#define LCDC_INT                    14
+#define SIM_INT                     15
+#define SIM_DATA_INT                16
+#define RTC_INT                     17
+#define RTC_SAMINT                  18
+#define UART2_MINT_PFERR            19
+#define UART2_MINT_RTS              20
+#define UART2_MINT_DTR              21
+#define UART2_MINT_UARTC            22
+#define UART2_MINT_TX               23
+#define UART2_MINT_RX               24
+#define UART1_MINT_PFERR            25
+#define UART1_MINT_RTS              26
+#define UART1_MINT_DTR              27
+#define UART1_MINT_UARTC            28
+#define UART1_MINT_TX               29
+#define UART1_MINT_RX               30
+#define VOICE_DAC_INT               31
+#define VOICE_ADC_INT               32
+#define PEN_DATA_INT                33
+#define PWM_INT                     34
+#define SDHC_INT                    35
+#define I2C_INT                     39
+#define CSPI_INT                    41
+#define SSI_TX_INT                  42
+#define SSI_TX_ERR_INT              43
+#define SSI_RX_INT                  44
+#define SSI_RX_ERR_INT              45
+#define TOUCH_INT                   46
+#define USBD_INT0                   47
+#define USBD_INT1                   48
+#define USBD_INT2                   49
+#define USBD_INT3                   50
+#define USBD_INT4                   51
+#define USBD_INT5                   52
+#define USBD_INT6                   53
+#define BTSYS_INT                   55
+#define BTTIM_INT                   56
+#define BTWUI_INT                   57
+#define TIMER2_INT                  58
+#define TIMER1_INT                  59
+#define DMA_ERR                     60
+#define DMA_INT                     61
+#define GPIO_INT_PORTD              62
+
+
+#define MAXIRQNUM                       62
+#define MAXFIQNUM                       62
+#define MAXSWINUM                       62
+
+
+#define TICKS_PER_uSEC                  24
+
+/*
+ *  These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+
+#endif 
+
+