summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorChander Kashyap <chander.kashyap@linaro.org>2011-08-18 22:37:19 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2011-09-04 11:36:15 +0200
commitb9a1ef219e12c08b2af695dd5355d6352b8ffc08 (patch)
tree64118b52dd0104ed6068f73abc293751a361be28
parent85776b02143ef8bbf5cc54e09ff1b4f020be11a9 (diff)
downloadu-boot-imx-b9a1ef219e12c08b2af695dd5355d6352b8ffc08.zip
u-boot-imx-b9a1ef219e12c08b2af695dd5355d6352b8ffc08.tar.gz
u-boot-imx-b9a1ef219e12c08b2af695dd5355d6352b8ffc08.tar.bz2
ARMV7: Add support for Samsung ORIGEN board
Origen board is based upon S5PV310 SoC which is similiar to S5PC210 SoC. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
-rw-r--r--MAINTAINERS1
-rw-r--r--board/samsung/origen/Makefile46
-rw-r--r--board/samsung/origen/lowlevel_init.S357
-rw-r--r--board/samsung/origen/mem_setup.S421
-rw-r--r--board/samsung/origen/origen.c109
-rw-r--r--board/samsung/origen/origen_setup.h546
-rw-r--r--boards.cfg1
-rw-r--r--include/configs/origen.h160
8 files changed, 1641 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 09fa789..84faea2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -707,6 +707,7 @@ Minkyu Kang <mk7.kang@samsung.com>
Chander Kashyap <k.chander@samsung.com>
+ origen ARM ARMV7 (S5PC210 SoC)
SMDKV310 ARM ARMV7 (S5PC210 SoC)
Torsten Koschorrek <koschorrek@synertronixx.de>
diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile
new file mode 100644
index 0000000..65eff91
--- /dev/null
+++ b/board/samsung/origen/Makefile
@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2011 Samsung Electronics
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+SOBJS := mem_setup.o
+SOBJS += lowlevel_init.o
+COBJS += origen.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S
new file mode 100644
index 0000000..ddca1e2
--- /dev/null
+++ b/board/samsung/origen/lowlevel_init.S
@@ -0,0 +1,357 @@
+/*
+ * Lowlevel setup for ORIGEN board based on S5PV310
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include "origen_setup.h"
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ * r7 has GPIO part1 base 0x11400000
+ * r6 has GPIO part2 base 0x11000000
+ */
+
+_TEXT_BASE:
+ .word CONFIG_SYS_TEXT_BASE
+
+ .globl lowlevel_init
+lowlevel_init:
+ push {lr}
+
+ /* r5 has always zero */
+ mov r5, #0
+ ldr r7, =S5PC210_GPIO_PART1_BASE
+ ldr r6, =S5PC210_GPIO_PART2_BASE
+
+ /* check reset status */
+ ldr r0, =(S5PC210_POWER_BASE + INFORM1_OFFSET)
+ ldr r1, [r0]
+
+ /* AFTR wakeup reset */
+ ldr r2, =S5P_CHECK_DIDLE
+ cmp r1, r2
+ beq exit_wakeup
+
+ /* LPA wakeup reset */
+ ldr r2, =S5P_CHECK_LPA
+ cmp r1, r2
+ beq exit_wakeup
+
+ /* Sleep wakeup reset */
+ ldr r2, =S5P_CHECK_SLEEP
+ cmp r1, r2
+ beq wakeup_reset
+
+ /*
+ * If U-boot is already running in ram, no need to relocate U-Boot.
+ * Memory controller must be configured before relocating U-Boot
+ * in ram.
+ */
+ ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
+ bic r1, pc, r0 /* pc <- current addr of code */
+ /* r1 <- unmasked bits of pc */
+ ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
+ bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
+ cmp r1, r2 /* compare r1, r2 */
+ beq 1f /* r0 == r1 then skip sdram init */
+
+ /* init system clock */
+ bl system_clock_init
+
+ /* Memory initialize */
+ bl mem_ctrl_asm_init
+
+1:
+ /* for UART */
+ bl uart_asm_init
+ bl tzpc_init
+ pop {pc}
+
+wakeup_reset:
+ bl system_clock_init
+ bl mem_ctrl_asm_init
+ bl tzpc_init
+
+exit_wakeup:
+ /* Load return address and jump to kernel */
+ ldr r0, =(S5PC210_POWER_BASE + INFORM0_OFFSET)
+
+ /* r1 = physical address of s5pc210_cpu_resume function */
+ ldr r1, [r0]
+
+ /* Jump to kernel*/
+ mov pc, r1
+ nop
+ nop
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+system_clock_init:
+ push {lr}
+ ldr r0, =S5PC210_CLOCK_BASE
+
+ /* APLL(1), MPLL(1), CORE(0), HPM(0) */
+ ldr r1, =CLK_SRC_CPU_VAL
+ ldr r2, =CLK_SRC_CPU_OFFSET
+ str r1, [r0, r2]
+
+ /* wait ?us */
+ mov r1, #0x10000
+2: subs r1, r1, #1
+ bne 2b
+
+ ldr r1, =CLK_SRC_TOP0_VAL
+ ldr r2, =CLK_SRC_TOP0_OFFSET
+ str r1, [r0, r2]
+
+ ldr r1, =CLK_SRC_TOP1_VAL
+ ldr r2, =CLK_SRC_TOP1_OFFSET
+ str r1, [r0, r2]
+
+ /* DMC */
+ ldr r1, =CLK_SRC_DMC_VAL
+ ldr r2, =CLK_SRC_DMC_OFFSET
+ str r1, [r0, r2]
+
+ /*CLK_SRC_LEFTBUS */
+ ldr r1, =CLK_SRC_LEFTBUS_VAL
+ ldr r2, =CLK_SRC_LEFTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /*CLK_SRC_RIGHTBUS */
+ ldr r1, =CLK_SRC_RIGHTBUS_VAL
+ ldr r2, =CLK_SRC_RIGHTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
+ ldr r1, =CLK_SRC_FSYS_VAL
+ ldr r2, =CLK_SRC_FSYS_OFFSET
+ str r1, [r0, r2]
+
+ /* UART[0:4] */
+ ldr r1, =CLK_SRC_PERIL0_VAL
+ ldr r2, =CLK_SRC_PERIL0_OFFSET
+ str r1, [r0, r2]
+
+ /* wait ?us */
+ mov r1, #0x10000
+3: subs r1, r1, #1
+ bne 3b
+
+ /* CLK_DIV_CPU0 */
+ ldr r1, =CLK_DIV_CPU0_VAL
+ ldr r2, =CLK_DIV_CPU0_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_CPU1 */
+ ldr r1, =CLK_DIV_CPU1_VAL
+ ldr r2, =CLK_DIV_CPU1_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_DMC0 */
+ ldr r1, =CLK_DIV_DMC0_VAL
+ ldr r2, =CLK_DIV_DMC0_OFFSET
+ str r1, [r0, r2]
+
+ /*CLK_DIV_DMC1 */
+ ldr r1, =CLK_DIV_DMC1_VAL
+ ldr r2, =CLK_DIV_DMC1_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_LEFTBUS */
+ ldr r1, =CLK_DIV_LEFTBUS_VAL
+ ldr r2, =CLK_DIV_LEFTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_RIGHTBUS */
+ ldr r1, =CLK_DIV_RIGHTBUS_VAL
+ ldr r2, =CLK_DIV_RIGHTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_TOP */
+ ldr r1, =CLK_DIV_TOP_VAL
+ ldr r2, =CLK_DIV_TOP_OFFSET
+ str r1, [r0, r2]
+
+ /* MMC[0:1] */
+ ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */
+ ldr r2, =CLK_DIV_FSYS1_OFFSET
+ str r1, [r0, r2]
+
+ /* MMC[2:3] */
+ ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */
+ ldr r2, =CLK_DIV_FSYS2_OFFSET
+ str r1, [r0, r2]
+
+ /* MMC4 */
+ ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */
+ ldr r2, =CLK_DIV_FSYS3_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_PERIL0: UART Clock Divisors */
+ ldr r1, =CLK_DIV_PERIL0_VAL
+ ldr r2, =CLK_DIV_PERIL0_OFFSET
+ str r1, [r0, r2]
+
+ /* Set PLL locktime */
+ ldr r1, =PLL_LOCKTIME
+ ldr r2, =APLL_LOCK_OFFSET
+ str r1, [r0, r2]
+
+ ldr r1, =PLL_LOCKTIME
+ ldr r2, =MPLL_LOCK_OFFSET
+ str r1, [r0, r2]
+
+ ldr r1, =PLL_LOCKTIME
+ ldr r2, =EPLL_LOCK_OFFSET
+ str r1, [r0, r2]
+
+ ldr r1, =PLL_LOCKTIME
+ ldr r2, =VPLL_LOCK_OFFSET
+ str r1, [r0, r2]
+
+ /* APLL_CON1 */
+ ldr r1, =APLL_CON1_VAL
+ ldr r2, =APLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /* APLL_CON0 */
+ ldr r1, =APLL_CON0_VAL
+ ldr r2, =APLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /* MPLL_CON1 */
+ ldr r1, =MPLL_CON1_VAL
+ ldr r2, =MPLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /* MPLL_CON0 */
+ ldr r1, =MPLL_CON0_VAL
+ ldr r2, =MPLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /* EPLL */
+ ldr r1, =EPLL_CON1_VAL
+ ldr r2, =EPLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /* EPLL_CON0 */
+ ldr r1, =EPLL_CON0_VAL
+ ldr r2, =EPLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /* VPLL_CON1 */
+ ldr r1, =VPLL_CON1_VAL
+ ldr r2, =VPLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /* VPLL_CON0 */
+ ldr r1, =VPLL_CON0_VAL
+ ldr r2, =VPLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /* wait ?us */
+ mov r1, #0x30000
+4: subs r1, r1, #1
+ bne 4b
+
+ pop {pc}
+/*
+ * uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
+ * void uart_asm_init(void)
+ */
+ .globl uart_asm_init
+uart_asm_init:
+
+ /* setup UART0-UART3 GPIOs (part1) */
+ mov r0, r7
+ ldr r1, =S5PC210_GPIO_A0_CON_VAL
+ str r1, [r0, #S5PC210_GPIO_A0_CON_OFFSET]
+ ldr r1, =S5PC210_GPIO_A1_CON_VAL
+ str r1, [r0, #S5PC210_GPIO_A1_CON_OFFSET]
+
+ ldr r0, =S5PC210_UART_BASE
+ add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
+
+ ldr r1, =ULCON_VAL
+ str r1, [r0, #ULCON_OFFSET]
+ ldr r1, =UCON_VAL
+ str r1, [r0, #UCON_OFFSET]
+ ldr r1, =UFCON_VAL
+ str r1, [r0, #UFCON_OFFSET]
+ ldr r1, =UBRDIV_VAL
+ str r1, [r0, #UBRDIV_OFFSET]
+ ldr r1, =UFRACVAL_VAL
+ str r1, [r0, #UFRACVAL_OFFSET]
+ mov pc, lr
+ nop
+ nop
+ nop
+
+/* Setting TZPC[TrustZone Protection Controller] */
+tzpc_init:
+ ldr r0, =TZPC0_BASE
+ mov r1, #R0SIZE
+ str r1, [r0]
+ mov r1, #DECPROTXSET
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC1_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC2_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC3_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC4_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC5_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ mov pc, lr
diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S
new file mode 100644
index 0000000..a798848
--- /dev/null
+++ b/board/samsung/origen/mem_setup.S
@@ -0,0 +1,421 @@
+/*
+ * Memory setup for ORIGEN board based on S5PV310
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include "origen_setup.h"
+#define SET_MIU
+
+ .globl mem_ctrl_asm_init
+mem_ctrl_asm_init:
+ /*
+ * Async bridge configuration at CPU_core:
+ * 1: half_sync
+ * 0: full_sync
+ */
+ ldr r0, =ASYNC_CONFIG
+ mov r1, #1
+ str r1, [r0]
+
+#ifdef SET_MIU
+ ldr r0, =S5PC210_MIU_BASE
+ /* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */
+ ldr r1, =0x20001507
+ str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET]
+
+ /* Update MIU Configuration */
+ ldr r1, =0x00000001
+ str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET]
+#endif
+ /* DREX0 */
+ ldr r0, =S5PC210_DMC0_BASE
+
+ /*
+ * DLL Parameter Setting:
+ * Termination: Enable R/W
+ * Phase Delay for DQS Cleaning: 180' Shift
+ */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /*
+ * ZQ Calibration
+ * Termination: Disable
+ * Auto Calibration Start: Enable
+ */
+ ldr r1, =0xE3855703
+ str r1, [r0, #DMC_PHYZQCONTROL]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+1: subs r2, r2, #1
+ bne 1b
+
+ /*
+ * Update DLL Information:
+ * Force DLL Resyncronization
+ */
+ ldr r1, =0xe000008e
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Reset Force DLL Resyncronization */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Enable Differential DQS, DLL Off*/
+ ldr r1, =0x71101008
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ /* Activate PHY DLL: DLL On */
+ ldr r1, =0x7110100A
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ /* Set DLL Parameters */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* DLL Start */
+ ldr r1, =0x7110100B
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ ldr r1, =0x00000000
+ str r1, [r0, #DMC_PHYCONTROL2]
+
+ /* Set Clock Ratio of Bus clock to Memory Clock */
+ ldr r1, =0x0FFF301a
+ str r1, [r0, #DMC_CONCONTROL]
+
+ /*
+ * Memor Burst length: 8
+ * Number of chips: 2
+ * Memory Bus width: 32 bit
+ * Memory Type: DDR3
+ * Additional Latancy for PLL: 1 Cycle
+ */
+ ldr r1, =0x00312640
+ str r1, [r0, #DMC_MEMCONTROL]
+
+ /*
+ * Memory Configuration Chip 0
+ * Address Mapping: Interleaved
+ * Number of Column address Bits: 10 bits
+ * Number of Rows Address Bits: 14
+ * Number of Banks: 8
+ */
+ ldr r1, =0x20e01323
+ str r1, [r0, #DMC_MEMCONFIG0]
+
+ /*
+ * Memory Configuration Chip 1
+ * Address Mapping: Interleaved
+ * Number of Column address Bits: 10 bits
+ * Number of Rows Address Bits: 14
+ * Number of Banks: 8
+ */
+ ldr r1, =0x40e01323
+ str r1, [r0, #DMC_MEMCONFIG1]
+
+ /* Config Precharge Policy */
+ ldr r1, =0xff000000
+ str r1, [r0, #DMC_PRECHCONFIG]
+
+ /*
+ * TimingAref, TimingRow, TimingData, TimingPower Setting:
+ * Values as per Memory AC Parameters
+ */
+ ldr r1, =0x000000BB
+ str r1, [r0, #DMC_TIMINGAREF]
+ ldr r1, =0x4046654f
+ str r1, [r0, #DMC_TIMINGROW]
+ ldr r1, =0x46400506
+ str r1, [r0, #DMC_TIMINGDATA]
+ ldr r1, =0x52000A3C
+ str r1, [r0, #DMC_TIMINGPOWER]
+
+ /* Chip0: NOP Command: Assert and Hold CKE to high level */
+ ldr r1, =0x07000000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+2: subs r2, r2, #1
+ bne 2b
+
+ /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ ldr r1, =0x00020000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00030000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00010002
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00000328
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+3: subs r2, r2, #1
+ bne 3b
+
+ /* Chip0: ZQINIT */
+ ldr r1, =0x0a000000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+4: subs r2, r2, #1
+ bne 4b
+
+ /* Chip1: NOP Command: Assert and Hold CKE to high level */
+ ldr r1, =0x07100000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+5: subs r2, r2, #1
+ bne 5b
+
+ /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ ldr r1, =0x00120000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00130000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00110002
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00100328
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+6: subs r2, r2, #1
+ bne 6b
+
+ /* Chip1: ZQINIT */
+ ldr r1, =0x0a100000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+7: subs r2, r2, #1
+ bne 7b
+
+ ldr r1, =0xe000008e
+ str r1, [r0, #DMC_PHYCONTROL1]
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+8: subs r2, r2, #1
+ bne 8b
+
+ /* DREX1 */
+ ldr r0, =S5PC210_DMC1_BASE @0x10410000
+
+ /*
+ * DLL Parameter Setting:
+ * Termination: Enable R/W
+ * Phase Delay for DQS Cleaning: 180' Shift
+ */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /*
+ * ZQ Calibration:
+ * Termination: Disable
+ * Auto Calibration Start: Enable
+ */
+ ldr r1, =0xE3855703
+ str r1, [r0, #DMC_PHYZQCONTROL]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+1: subs r2, r2, #1
+ bne 1b
+
+ /*
+ * Update DLL Information:
+ * Force DLL Resyncronization
+ */
+ ldr r1, =0xe000008e
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Reset Force DLL Resyncronization */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Enable Differential DQS, DLL Off*/
+ ldr r1, =0x71101008
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ /* Activate PHY DLL: DLL On */
+ ldr r1, =0x7110100A
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ /* Set DLL Parameters */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* DLL Start */
+ ldr r1, =0x7110100B
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ ldr r1, =0x00000000
+ str r1, [r0, #DMC_PHYCONTROL2]
+
+ /* Set Clock Ratio of Bus clock to Memory Clock */
+ ldr r1, =0x0FFF301a
+ str r1, [r0, #DMC_CONCONTROL]
+
+ /*
+ * Memor Burst length: 8
+ * Number of chips: 2
+ * Memory Bus width: 32 bit
+ * Memory Type: DDR3
+ * Additional Latancy for PLL: 1 Cycle
+ */
+ ldr r1, =0x00312640
+ str r1, [r0, #DMC_MEMCONTROL]
+
+ /*
+ * Memory Configuration Chip 0
+ * Address Mapping: Interleaved
+ * Number of Column address Bits: 10 bits
+ * Number of Rows Address Bits: 14
+ * Number of Banks: 8
+ */
+ ldr r1, =0x20e01323
+ str r1, [r0, #DMC_MEMCONFIG0]
+
+ /*
+ * Memory Configuration Chip 1
+ * Address Mapping: Interleaved
+ * Number of Column address Bits: 10 bits
+ * Number of Rows Address Bits: 14
+ * Number of Banks: 8
+ */
+ ldr r1, =0x40e01323
+ str r1, [r0, #DMC_MEMCONFIG1]
+
+ /* Config Precharge Policy */
+ ldr r1, =0xff000000
+ str r1, [r0, #DMC_PRECHCONFIG]
+
+ /*
+ * TimingAref, TimingRow, TimingData, TimingPower Setting:
+ * Values as per Memory AC Parameters
+ */
+ ldr r1, =0x000000BB
+ str r1, [r0, #DMC_TIMINGAREF]
+ ldr r1, =0x4046654f
+ str r1, [r0, #DMC_TIMINGROW]
+ ldr r1, =0x46400506
+ str r1, [r0, #DMC_TIMINGDATA]
+ ldr r1, =0x52000A3C
+ str r1, [r0, #DMC_TIMINGPOWER]
+
+ /* Chip0: NOP Command: Assert and Hold CKE to high level */
+ ldr r1, =0x07000000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+2: subs r2, r2, #1
+ bne 2b
+
+ /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ ldr r1, =0x00020000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00030000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00010002
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00000328
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+3: subs r2, r2, #1
+ bne 3b
+
+ /* Chip 0: ZQINIT */
+ ldr r1, =0x0a000000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+4: subs r2, r2, #1
+ bne 4b
+
+ /* Chip1: NOP Command: Assert and Hold CKE to high level */
+ ldr r1, =0x07100000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+5: subs r2, r2, #1
+ bne 5b
+
+ /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ ldr r1, =0x00120000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00130000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00110002
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00100328
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+6: subs r2, r2, #1
+ bne 6b
+
+ /* Chip1: ZQINIT */
+ ldr r1, =0x0a100000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+7: subs r2, r2, #1
+ bne 7b
+
+ ldr r1, =0xe000008e
+ str r1, [r0, #DMC_PHYCONTROL1]
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+8: subs r2, r2, #1
+ bne 8b
+
+ /* turn on DREX0, DREX1 */
+ ldr r0, =S5PC210_DMC0_BASE
+ ldr r1, =0x0FFF303a
+ str r1, [r0, #DMC_CONCONTROL]
+
+ ldr r0, =S5PC210_DMC1_BASE
+ ldr r1, =0x0FFF303a
+ str r1, [r0, #DMC_CONCONTROL]
+
+ mov pc, lr
diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
new file mode 100644
index 0000000..8882646
--- /dev/null
+++ b/board/samsung/origen/origen.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+struct s5pc210_gpio_part1 *gpio1;
+struct s5pc210_gpio_part2 *gpio2;
+
+int board_init(void)
+{
+ gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
+ gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+
+ gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \
+ PHYS_SDRAM_1_SIZE);
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \
+ PHYS_SDRAM_2_SIZE);
+ gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+ gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \
+ PHYS_SDRAM_3_SIZE);
+ gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+ gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \
+ PHYS_SDRAM_4_SIZE);
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ printf("\nBoard: ORIGEN\n");
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ int i, err;
+
+ /*
+ * MMC2 SD card GPIO:
+ *
+ * GPK2[0] SD_2_CLK(2)
+ * GPK2[1] SD_2_CMD(2)
+ * GPK2[2] SD_2_CDn
+ * GPK2[3:6] SD_2_DATA[0:3](2)
+ */
+ for (i = 0; i < 7; i++) {
+ /* GPK2[0:6] special function 2 */
+ s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
+
+ /* GPK2[0:6] drv 4x */
+ s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+
+ /* GPK2[0:1] pull disable */
+ if (i == 0 || i == 1) {
+ s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+ continue;
+ }
+
+ /* GPK2[2:6] pull up */
+ s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
+ }
+
+ err = s5p_mmc_init(2, 4);
+ return err;
+}
+#endif
diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h
new file mode 100644
index 0000000..63d85d8
--- /dev/null
+++ b/board/samsung/origen/origen_setup.h
@@ -0,0 +1,546 @@
+/*
+ * Machine Specific Values for ORIGEN board based on S5PV310
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ORIGEN_SETUP_H
+#define _ORIGEN_SETUP_H
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+/* Offsets of clock registers (sources and dividers) */
+#define CLK_SRC_CPU_OFFSET 0x14200
+#define CLK_DIV_CPU0_OFFSET 0x14500
+#define CLK_DIV_CPU1_OFFSET 0x14504
+
+#define CLK_SRC_DMC_OFFSET 0x10200
+#define CLK_DIV_DMC0_OFFSET 0x10500
+#define CLK_DIV_DMC1_OFFSET 0x10504
+
+#define CLK_SRC_TOP0_OFFSET 0xC210
+#define CLK_SRC_TOP1_OFFSET 0xC214
+#define CLK_DIV_TOP_OFFSET 0xC510
+
+#define CLK_SRC_LEFTBUS_OFFSET 0x4200
+#define CLK_DIV_LEFTBUS_OFFSET 0x4500
+
+#define CLK_SRC_RIGHTBUS_OFFSET 0x8200
+#define CLK_DIV_RIGHTBUS_OFFSET 0x8500
+
+#define CLK_SRC_FSYS_OFFSET 0xC240
+#define CLK_DIV_FSYS1_OFFSET 0xC544
+#define CLK_DIV_FSYS2_OFFSET 0xC548
+#define CLK_DIV_FSYS3_OFFSET 0xC54C
+
+#define CLK_SRC_PERIL0_OFFSET 0xC250
+#define CLK_DIV_PERIL0_OFFSET 0xC550
+
+#define APLL_LOCK_OFFSET 0x14000
+#define MPLL_LOCK_OFFSET 0x14008
+#define APLL_CON0_OFFSET 0x14100
+#define APLL_CON1_OFFSET 0x14104
+#define MPLL_CON0_OFFSET 0x14108
+#define MPLL_CON1_OFFSET 0x1410C
+
+#define EPLL_LOCK_OFFSET 0xC010
+#define VPLL_LOCK_OFFSET 0xC020
+#define EPLL_CON0_OFFSET 0xC110
+#define EPLL_CON1_OFFSET 0xC114
+#define VPLL_CON0_OFFSET 0xC120
+#define VPLL_CON1_OFFSET 0xC124
+
+/* DMC: DRAM Controllor Register offsets */
+#define DMC_CONCONTROL 0x00
+#define DMC_MEMCONTROL 0x04
+#define DMC_MEMCONFIG0 0x08
+#define DMC_MEMCONFIG1 0x0C
+#define DMC_DIRECTCMD 0x10
+#define DMC_PRECHCONFIG 0x14
+#define DMC_PHYCONTROL0 0x18
+#define DMC_PHYCONTROL1 0x1C
+#define DMC_PHYCONTROL2 0x20
+#define DMC_TIMINGAREF 0x30
+#define DMC_TIMINGROW 0x34
+#define DMC_TIMINGDATA 0x38
+#define DMC_TIMINGPOWER 0x3C
+#define DMC_PHYZQCONTROL 0x44
+
+/* Bus Configuration Register Address */
+#define ASYNC_CONFIG 0x10010350
+
+/* MIU Config Register Offsets*/
+#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
+#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
+
+/* Offset for inform registers */
+#define INFORM0_OFFSET 0x800
+#define INFORM1_OFFSET 0x804
+
+/* GPIO Offsets for UART: GPIO Contol Register */
+#define S5PC210_GPIO_A0_CON_OFFSET 0x00
+#define S5PC210_GPIO_A1_CON_OFFSET 0x20
+
+/* UART Register offsets */
+#define ULCON_OFFSET 0x00
+#define UCON_OFFSET 0x04
+#define UFCON_OFFSET 0x08
+#define UBRDIV_OFFSET 0x28
+#define UFRACVAL_OFFSET 0x2C
+
+/* TZPC : Register Offsets */
+#define TZPC0_BASE 0x10110000
+#define TZPC1_BASE 0x10120000
+#define TZPC2_BASE 0x10130000
+#define TZPC3_BASE 0x10140000
+#define TZPC4_BASE 0x10150000
+#define TZPC5_BASE 0x10160000
+
+#define TZPC_DECPROT0SET_OFFSET 0x804
+#define TZPC_DECPROT1SET_OFFSET 0x810
+#define TZPC_DECPROT2SET_OFFSET 0x81C
+#define TZPC_DECPROT3SET_OFFSET 0x828
+
+/* CLK_SRC_CPU */
+#define MUX_HPM_SEL_MOUTAPLL 0x0
+#define MUX_HPM_SEL_SCLKMPLL 0x1
+#define MUX_CORE_SEL_MOUTAPLL 0x0
+#define MUX_CORE_SEL_SCLKMPLL 0x1
+#define MUX_MPLL_SEL_FILPLL 0x0
+#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1
+#define MUX_APLL_SEL_FILPLL 0x0
+#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1
+#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \
+ | (MUX_CORE_SEL_MOUTAPLL << 16) \
+ | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\
+ | (MUX_APLL_SEL_MOUTMPLLFOUT << 0))
+
+/* CLK_DIV_CPU0 */
+#define APLL_RATIO 0x0
+#define PCLK_DBG_RATIO 0x1
+#define ATB_RATIO 0x3
+#define PERIPH_RATIO 0x3
+#define COREM1_RATIO 0x7
+#define COREM0_RATIO 0x3
+#define CORE_RATIO 0x0
+#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \
+ | (PCLK_DBG_RATIO << 20) \
+ | (ATB_RATIO << 16) \
+ | (PERIPH_RATIO << 12) \
+ | (COREM1_RATIO << 8) \
+ | (COREM0_RATIO << 4) \
+ | (CORE_RATIO << 0))
+
+/* CLK_DIV_CPU1 */
+#define HPM_RATIO 0x0
+#define COPY_RATIO 0x3
+#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO))
+
+/* CLK_SRC_DMC */
+#define MUX_PWI_SEL_XXTI 0x0
+#define MUX_PWI_SEL_XUSBXTI 0x1
+#define MUX_PWI_SEL_SCLK_HDMI24M 0x2
+#define MUX_PWI_SEL_SCLK_USBPHY0 0x3
+#define MUX_PWI_SEL_SCLK_USBPHY1 0x4
+#define MUX_PWI_SEL_SCLK_HDMIPHY 0x5
+#define MUX_PWI_SEL_SCLKMPLL 0x6
+#define MUX_PWI_SEL_SCLKEPLL 0x7
+#define MUX_PWI_SEL_SCLKVPLL 0x8
+#define MUX_DPHY_SEL_SCLKMPLL 0x0
+#define MUX_DPHY_SEL_SCLKAPLL 0x1
+#define MUX_DMC_BUS_SEL_SCLKMPLL 0x0
+#define MUX_DMC_BUS_SEL_SCLKAPLL 0x1
+#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL_XUSBXTI << 16) \
+ | (MUX_DPHY_SEL_SCLKMPLL << 8) \
+ | (MUX_DMC_BUS_SEL_SCLKMPLL << 4))
+
+/* CLK_DIV_DMC0 */
+#define CORE_TIMERS_RATIO 0x1
+#define COPY2_RATIO 0x3
+#define DMCP_RATIO 0x1
+#define DMCD_RATIO 0x1
+#define DMC_RATIO 0x1
+#define DPHY_RATIO 0x1
+#define ACP_PCLK_RATIO 0x1
+#define ACP_RATIO 0x3
+#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \
+ | (COPY2_RATIO << 24) \
+ | (DMCP_RATIO << 20) \
+ | (DMCD_RATIO << 16) \
+ | (DMC_RATIO << 12) \
+ | (DPHY_RATIO << 8) \
+ | (ACP_PCLK_RATIO << 4) \
+ | (ACP_RATIO << 0))
+
+/* CLK_DIV_DMC1 */
+#define DPM_RATIO 0x1
+#define DVSEM_RATIO 0x1
+#define PWI_RATIO 0x1
+#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \
+ | (DVSEM_RATIO << 16) \
+ | (PWI_RATIO << 8))
+
+/* CLK_SRC_TOP0 */
+#define MUX_ONENAND_SEL_ACLK_133 0x0
+#define MUX_ONENAND_SEL_ACLK_160 0x1
+#define MUX_ACLK_133_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_133_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_160_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_160_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_100_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_100_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_200_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_200_SEL_SCLKAPLL 0x1
+#define MUX_VPLL_SEL_FINPLL 0x0
+#define MUX_VPLL_SEL_FOUTVPLL 0x1
+#define MUX_EPLL_SEL_FINPLL 0x0
+#define MUX_EPLL_SEL_FOUTEPLL 0x1
+#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0
+#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1
+#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_133 << 28) \
+ | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \
+ | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \
+ | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \
+ | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \
+ | (MUX_VPLL_SEL_FINPLL << 8) \
+ | (MUX_EPLL_SEL_FINPLL << 4)\
+ | (MUX_ONENAND_1_SEL_MOUTONENAND << 0))
+
+/* CLK_SRC_TOP1 */
+#define VPLLSRC_SEL_FINPLL 0x0
+#define VPLLSRC_SEL_SCLKHDMI24M 0x1
+#define CLK_SRC_TOP1_VAL (VPLLSRC_SEL_FINPLL)
+
+/* CLK_DIV_TOP */
+#define ONENAND_RATIO 0x0
+#define ACLK_133_RATIO 0x5
+#define ACLK_160_RATIO 0x4
+#define ACLK_100_RATIO 0x7
+#define ACLK_200_RATIO 0x3
+#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \
+ | (ACLK_133_RATIO << 12)\
+ | (ACLK_160_RATIO << 8) \
+ | (ACLK_100_RATIO << 4) \
+ | (ACLK_200_RATIO << 0))
+
+/* CLK_SRC_LEFTBUS */
+#define MUX_GDL_SEL_SCLKMPLL 0x0
+#define MUX_GDL_SEL_SCLKAPLL 0x1
+#define CLK_SRC_LEFTBUS_VAL (MUX_GDL_SEL_SCLKMPLL)
+
+/* CLK_DIV_LEFTBUS */
+#define GPL_RATIO 0x1
+#define GDL_RATIO 0x3
+#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO))
+
+/* CLK_SRC_RIGHTBUS */
+#define MUX_GDR_SEL_SCLKMPLL 0x0
+#define MUX_GDR_SEL_SCLKAPLL 0x1
+#define CLK_SRC_RIGHTBUS_VAL (MUX_GDR_SEL_SCLKMPLL)
+
+/* CLK_DIV_RIGHTBUS */
+#define GPR_RATIO 0x1
+#define GDR_RATIO 0x3
+#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO))
+
+/* CLK_SRS_FSYS: 6 = SCLKMPLL */
+#define SATA_SEL_SCLKMPLL 0
+#define SATA_SEL_SCLKAPLL 1
+
+#define MMC_SEL_XXTI 0
+#define MMC_SEL_XUSBXTI 1
+#define MMC_SEL_SCLK_HDMI24M 2
+#define MMC_SEL_SCLK_USBPHY0 3
+#define MMC_SEL_SCLK_USBPHY1 4
+#define MMC_SEL_SCLK_HDMIPHY 5
+#define MMC_SEL_SCLKMPLL 6
+#define MMC_SEL_SCLKEPLL 7
+#define MMC_SEL_SCLKVPLL 8
+
+#define MMCC0_SEL MMC_SEL_SCLKMPLL
+#define MMCC1_SEL MMC_SEL_SCLKMPLL
+#define MMCC2_SEL MMC_SEL_SCLKMPLL
+#define MMCC3_SEL MMC_SEL_SCLKMPLL
+#define MMCC4_SEL MMC_SEL_SCLKMPLL
+#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \
+ | (MMCC4_SEL << 16) \
+ | (MMCC3_SEL << 12) \
+ | (MMCC2_SEL << 8) \
+ | (MMCC1_SEL << 4) \
+ | (MMCC0_SEL << 0))
+
+/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */
+/* CLK_DIV_FSYS1 */
+#define MMC0_RATIO 0xF
+#define MMC0_PRE_RATIO 0x0
+#define MMC1_RATIO 0xF
+#define MMC1_PRE_RATIO 0x0
+#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \
+ | (MMC1_RATIO << 16) \
+ | (MMC0_PRE_RATIO << 8) \
+ | (MMC0_RATIO << 0))
+
+/* CLK_DIV_FSYS2 */
+#define MMC2_RATIO 0xF
+#define MMC2_PRE_RATIO 0x0
+#define MMC3_RATIO 0xF
+#define MMC3_PRE_RATIO 0x0
+#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \
+ | (MMC3_RATIO << 16) \
+ | (MMC2_PRE_RATIO << 8) \
+ | (MMC2_RATIO << 0))
+
+/* CLK_DIV_FSYS3 */
+#define MMC4_RATIO 0xF
+#define MMC4_PRE_RATIO 0x0
+#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \
+ | (MMC4_RATIO << 0))
+
+/* CLK_SRC_PERIL0 */
+#define UART_SEL_XXTI 0
+#define UART_SEL_XUSBXTI 1
+#define UART_SEL_SCLK_HDMI24M 2
+#define UART_SEL_SCLK_USBPHY0 3
+#define UART_SEL_SCLK_USBPHY1 4
+#define UART_SEL_SCLK_HDMIPHY 5
+#define UART_SEL_SCLKMPLL 6
+#define UART_SEL_SCLKEPLL 7
+#define UART_SEL_SCLKVPLL 8
+
+#define UART0_SEL UART_SEL_SCLKMPLL
+#define UART1_SEL UART_SEL_SCLKMPLL
+#define UART2_SEL UART_SEL_SCLKMPLL
+#define UART3_SEL UART_SEL_SCLKMPLL
+#define UART4_SEL UART_SEL_SCLKMPLL
+#define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \
+ | (UART3_SEL << 12) \
+ | (UART2_SEL << 8) \
+ | (UART1_SEL << 4) \
+ | (UART0_SEL << 0))
+
+/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */
+/* CLK_DIV_PERIL0 */
+#define UART0_RATIO 7
+#define UART1_RATIO 7
+#define UART2_RATIO 7
+#define UART3_RATIO 7
+#define UART4_RATIO 7
+#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \
+ | (UART3_RATIO << 12) \
+ | (UART2_RATIO << 8) \
+ | (UART1_RATIO << 4) \
+ | (UART0_RATIO << 0))
+
+/* Required period to generate a stable clock output */
+/* PLL_LOCK_TIME */
+#define PLL_LOCKTIME 0x1C20
+
+/* PLL Values */
+#define DISABLE 0
+#define ENABLE 1
+#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\
+ | (mdiv << 16) \
+ | (pdiv << 8) \
+ | (sdiv << 0))
+
+/* APLL_CON0 */
+#define APLL_MDIV 0xFA
+#define APLL_PDIV 0x6
+#define APLL_SDIV 0x1
+#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV)
+
+/* APLL_CON1 */
+#define APLL_AFC_ENB 0x1
+#define APLL_AFC 0xC
+#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0))
+
+/* MPLL_CON0 */
+#define MPLL_MDIV 0xC8
+#define MPLL_PDIV 0x6
+#define MPLL_SDIV 0x1
+#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
+
+/* MPLL_CON1 */
+#define MPLL_AFC_ENB 0x0
+#define MPLL_AFC 0x1C
+#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0))
+
+/* EPLL_CON0 */
+#define EPLL_MDIV 0x30
+#define EPLL_PDIV 0x3
+#define EPLL_SDIV 0x2
+#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
+
+/* EPLL_CON1 */
+#define EPLL_K 0x0
+#define EPLL_CON1_VAL (EPLL_K >> 0)
+
+/* VPLL_CON0 */
+#define VPLL_MDIV 0x35
+#define VPLL_PDIV 0x3
+#define VPLL_SDIV 0x2
+#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
+
+/* VPLL_CON1 */
+#define VPLL_SSCG_EN DISABLE
+#define VPLL_SEL_PF_DN_SPREAD 0x0
+#define VPLL_MRR 0x11
+#define VPLL_MFR 0x0
+#define VPLL_K 0x400
+#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\
+ | (VPLL_SEL_PF_DN_SPREAD << 29) \
+ | (VPLL_MRR << 24) \
+ | (VPLL_MFR << 16) \
+ | (VPLL_K << 0))
+/*
+ * UART GPIO_A0/GPIO_A1 Control Register Value
+ * 0x2: UART Function
+ */
+#define S5PC210_GPIO_A0_CON_VAL 0x22222222
+#define S5PC210_GPIO_A1_CON_VAL 0x222222
+
+/* ULCON: UART Line Control Value 8N1 */
+#define WORD_LEN_5_BIT 0x00
+#define WORD_LEN_6_BIT 0x01
+#define WORD_LEN_7_BIT 0x02
+#define WORD_LEN_8_BIT 0x03
+
+#define STOP_BIT_1 0x00
+#define STOP_BIT_2 0x01
+
+#define NO_PARITY 0x00
+#define ODD_PARITY 0x4
+#define EVEN_PARITY 0x5
+#define FORCED_PARITY_CHECK_AS_1 0x6
+#define FORCED_PARITY_CHECK_AS_0 0x7
+
+#define INFRAMODE_NORMAL 0x00
+#define INFRAMODE_INFRARED 0x01
+
+#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \
+ | (NO_PARITY << 3) \
+ | (STOP_BIT_1 << 2) \
+ | (WORD_LEN_8_BIT << 0))
+
+/*
+ * UCON: UART Control Value
+ * Tx_interrupt Type: Level
+ * Rx_interrupt Type: Level
+ * Rx Timeout Enabled: Yes
+ * Rx-Error Atatus_Int Enable: Yes
+ * Loop_Back: No
+ * Break Signal: No
+ * Transmit mode : Interrupt request/polling
+ * Receive mode : Interrupt request/polling
+ */
+#define TX_PULSE_INTERRUPT 0
+#define TX_LEVEL_INTERRUPT 1
+#define RX_PULSE_INTERRUPT 0
+#define RX_LEVEL_INTERRUPT 1
+
+#define RX_TIME_OUT ENABLE
+#define RX_ERROR_STATE_INT_ENB ENABLE
+#define LOOP_BACK DISABLE
+#define BREAK_SIGNAL DISABLE
+
+#define TX_MODE_DISABLED 0X00
+#define TX_MODE_IRQ_OR_POLL 0X01
+#define TX_MODE_DMA 0X02
+
+#define RX_MODE_DISABLED 0X00
+#define RX_MODE_IRQ_OR_POLL 0X01
+#define RX_MODE_DMA 0X02
+
+#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \
+ | (RX_LEVEL_INTERRUPT << 8) \
+ | (RX_TIME_OUT << 7) \
+ | (RX_ERROR_STATE_INT_ENB << 6) \
+ | (LOOP_BACK << 5) \
+ | (BREAK_SIGNAL << 4) \
+ | (TX_MODE_IRQ_OR_POLL << 2) \
+ | (RX_MODE_IRQ_OR_POLL << 0))
+
+/*
+ * UFCON: UART FIFO Control Value
+ * Tx FIFO Trigger LEVEL: 2 Bytes (001)
+ * Rx FIFO Trigger LEVEL: 2 Bytes (001)
+ * Tx Fifo Reset: No
+ * Rx Fifo Reset: No
+ * FIFO Enable: Yes
+ */
+#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00
+#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1
+#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2
+#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3
+#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4
+#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5
+#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6
+#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7
+
+#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0
+#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1
+#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2
+#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3
+#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4
+#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5
+#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6
+#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7
+
+#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES
+#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES
+#define TX_FIFO_RESET DISABLE
+#define RX_FIFO_RESET DISABLE
+#define FIFO_ENABLE ENABLE
+#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \
+ | (RX_FIFO_TRIGGER_LEVEL << 4) \
+ | (TX_FIFO_RESET << 2) \
+ | (RX_FIFO_RESET << 1) \
+ | (FIFO_ENABLE << 0))
+/*
+ * Baud Rate Division Value
+ * 115200 BAUD:
+ * UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1)
+ * UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1)
+ */
+#define UBRDIV_VAL 0x35
+
+/*
+ * Fractional Part of Baud Rate Divisor:
+ * 115200 BAUD:
+ * UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10)
+ * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10)
+ */
+#define UFRACVAL_VAL 0x4
+
+/*
+ * TZPC Register Value :
+ * R0SIZE: 0x0 : Size of secured ram
+ */
+#define R0SIZE 0x0
+
+/*
+ * TZPC Decode Protection Register Value :
+ * DECPROTXSET: 0xFF : Set Decode region to non-secure
+ */
+#define DECPROTXSET 0xFF
+#endif
diff --git a/boards.cfg b/boards.cfg
index 12c82df..734ea8e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -186,6 +186,7 @@ omap4_panda arm armv7 panda ti
omap4_sdp4430 arm armv7 sdp4430 ti omap4
s5p_goni arm armv7 goni samsung s5pc1xx
smdkc100 arm armv7 smdkc100 samsung s5pc1xx
+origen arm armv7 origen samsung s5pc2xx
s5pc210_universal arm armv7 universal_c210 samsung s5pc2xx
smdkv310 arm armv7 smdkv310 samsung s5pc2xx
harmony arm armv7 harmony nvidia tegra2
diff --git a/include/configs/origen.h b/include/configs/origen.h
new file mode 100644
index 0000000..e8252cc
--- /dev/null
+++ b/include/configs/origen.h
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG ORIGEN (S5PV310) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG 1 /* SAMSUNG core */
+#define CONFIG_S5P 1 /* S5P Family */
+#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */
+#define CONFIG_ORIGEN 1 /* working with ORIGEN*/
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_L2_OFF 1
+#define CONFIG_SYS_DCACHE_OFF 1
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_TEXT_BASE 0x43E00000
+
+/* input clock of PLL: ORIGEN has 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* MACH_TYPE_ORIGEN macro will be removed once added to mach-types */
+#define MACH_TYPE_ORIGEN 3455
+#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP 0x00000BAD
+#define S5P_CHECK_DIDLE 0xBAD00000
+#define S5P_CHECK_LPA 0xABAD0000
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL_MULTI 1
+#define CONFIG_SERIAL2 1 /* use SERIAL 2 */
+#define CONFIG_BAUDRATE 115200
+#define S5PC210_DEFAULT_UART_OFFSET 0x020000
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_MMC 1
+#define CONFIG_S5P_MMC 1
+
+/* PWM */
+#define CONFIG_PWM 1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "ORIGEN # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+#define CONFIG_SYS_HZ 1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE (256 << 10) /* 256KB */
+
+/* ORIGEN has 4 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS 4
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH 1
+#undef CONFIG_CMD_IMLS
+#define CONFIG_IDENT_STRING " for ORIGEN"
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+#define CONFIG_CLK_1000_400_200
+
+/* MIU (Memory Interleaving Unit) */
+#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
+
+#define CONFIG_ENV_IS_IN_MMC 1
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
+#define RESERVE_BLOCK_SIZE (512)
+#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
+#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE)
+#define CONFIG_DOS_PARTITION 1
+
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
+#endif /* __CONFIG_H */