summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMarek Vasut <marek.vasut@gmail.com>2010-10-20 20:48:43 +0200
committerMarek Vasut <marek.vasut@gmail.com>2010-10-22 01:38:01 +0200
commit75e203584a570fcc1d119f3d6a0f3d381d3d42ca (patch)
treec9e31ff83fc2023cfa55aed69393ceea7aa41e7a
parent9b3d167fde83375322b4b3075b9932be4772537b (diff)
downloadu-boot-imx-75e203584a570fcc1d119f3d6a0f3d381d3d42ca.zip
u-boot-imx-75e203584a570fcc1d119f3d6a0f3d381d3d42ca.tar.gz
u-boot-imx-75e203584a570fcc1d119f3d6a0f3d381d3d42ca.tar.bz2
PXA: Remove "delta" board
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
-rw-r--r--board/delta/Makefile52
-rw-r--r--board/delta/config.mk1
-rw-r--r--board/delta/delta.c378
-rw-r--r--board/delta/lowlevel_init.S146
-rw-r--r--board/delta/nand.c558
-rw-r--r--boards.cfg1
-rw-r--r--include/configs/delta.h267
7 files changed, 0 insertions, 1403 deletions
diff --git a/board/delta/Makefile b/board/delta/Makefile
deleted file mode 100644
index 648e00c..0000000
--- a/board/delta/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS := delta.o nand.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/delta/config.mk b/board/delta/config.mk
deleted file mode 100644
index 8b24044..0000000
--- a/board/delta/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x83008000
diff --git a/board/delta/delta.c b/board/delta/delta.c
deleted file mode 100644
index df23076..0000000
--- a/board/delta/delta.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * (C) Copyright 2006
- * DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <da9030.h>
-#include <malloc.h>
-#include <command.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-static void init_DA9030(void);
-static void keys_init(void);
-static void get_pressed_keys(uchar *s);
-static uchar *key_match(uchar *kbd_data);
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of Lubbock-Board mk@tbd: fix this! */
- gd->bd->bi_arch_number = MACH_TYPE_LUBBOCK;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xa0000100;
-
- return 0;
-}
-
-int board_late_init(void)
-{
-#ifdef DELTA_CHECK_KEYBD
- uchar kbd_data[KEYBD_DATALEN];
- char keybd_env[2 * KEYBD_DATALEN + 1];
- char *str;
- int i;
-#endif /* DELTA_CHECK_KEYBD */
-
- setenv("stdout", "serial");
- setenv("stderr", "serial");
-
-#ifdef DELTA_CHECK_KEYBD
- keys_init();
-
- memset(kbd_data, '\0', KEYBD_DATALEN);
-
- /* check for pressed keys and setup keybd_env */
- get_pressed_keys(kbd_data);
-
- for (i = 0; i < KEYBD_DATALEN; ++i) {
- sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
- }
- setenv ("keybd", keybd_env);
-
- str = strdup ((char *)key_match (kbd_data)); /* decode keys */
-
-# ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */
- setenv ("preboot", str); /* set or delete definition */
-# endif /* CONFIG_PREBOOT */
- if (str != NULL) {
- free (str);
- }
-#endif /* DELTA_CHECK_KEYBD */
-
- init_DA9030();
- return 0;
-}
-
-/*
- * Magic Key Handling, mainly copied from board/lwmon/lwmon.c
- */
-#ifdef DELTA_CHECK_KEYBD
-
-static uchar kbd_magic_prefix[] = "key_magic";
-static uchar kbd_command_prefix[] = "key_cmd";
-
-/*
- * Get pressed keys
- * s is a buffer of size KEYBD_DATALEN-1
- */
-static void get_pressed_keys(uchar *s)
-{
- unsigned long val;
- val = readl(GPLR3);
-
- if(val & (1<<31))
- *s++ = KEYBD_KP_DKIN0;
- if(val & (1<<18))
- *s++ = KEYBD_KP_DKIN1;
- if(val & (1<<29))
- *s++ = KEYBD_KP_DKIN2;
- if(val & (1<<22))
- *s++ = KEYBD_KP_DKIN5;
-}
-
-static void keys_init()
-{
- writel(readl(CKENB) | CKENB_7_GPIO, CKENB);
- udelay(100);
-
- /* Configure GPIOs */
- writel(0xa840, GPIO127); /* KP_DKIN0 */
- writel(0xa840, GPIO114); /* KP_DKIN1 */
- writel(0xa840, GPIO125); /* KP_DKIN2 */
- writel(0xa840, GPIO118); /* KP_DKIN5 */
-
- /* Configure GPIOs as inputs */
- writel(readl(GPDR3) & ~(1<<31 | 1<<18 | 1<<29 | 1<<22), GPDR3);
- writel((1<<31 | 1<<18 | 1<<29 | 1<<22), GCDR3);
-
- udelay(100);
-}
-
-static int compare_magic (uchar *kbd_data, uchar *str)
-{
- /* uchar compare[KEYBD_DATALEN-1]; */
- uchar compare[KEYBD_DATALEN];
- char *nxt;
- int i;
-
- /* Don't include modifier byte */
- /* memcpy (compare, kbd_data+1, KEYBD_DATALEN-1); */
- memcpy (compare, kbd_data, KEYBD_DATALEN);
-
- for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) {
- uchar c;
- int k;
-
- c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16);
-
- if (str == (uchar *)nxt) { /* invalid character */
- break;
- }
-
- /*
- * Check if this key matches the input.
- * Set matches to zero, so they match only once
- * and we can find duplicates or extra keys
- */
- for (k = 0; k < sizeof(compare); ++k) {
- if (compare[k] == '\0') /* only non-zero entries */
- continue;
- if (c == compare[k]) { /* found matching key */
- compare[k] = '\0';
- break;
- }
- }
- if (k == sizeof(compare)) {
- return -1; /* unmatched key */
- }
- }
-
- /*
- * A full match leaves no keys in the `compare' array,
- */
- for (i = 0; i < sizeof(compare); ++i) {
- if (compare[i])
- {
- return -1;
- }
- }
-
- return 0;
-}
-
-
-static uchar *key_match (uchar *kbd_data)
-{
- char magic[sizeof (kbd_magic_prefix) + 1];
- uchar *suffix;
- char *kbd_magic_keys;
-
- /*
- * The following string defines the characters that can pe appended
- * to "key_magic" to form the names of environment variables that
- * hold "magic" key codes, i. e. such key codes that can cause
- * pre-boot actions. If the string is empty (""), then only
- * "key_magic" is checked (old behaviour); the string "125" causes
- * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
- */
- if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
- kbd_magic_keys = "";
-
- /* loop over all magic keys;
- * use '\0' suffix in case of empty string
- */
- for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) {
- sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
-#if 0
- printf ("### Check magic \"%s\"\n", magic);
-#endif
- if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) {
- char cmd_name[sizeof (kbd_command_prefix) + 1];
- char *cmd;
-
- sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
-
- cmd = getenv (cmd_name);
-#if 0
- printf ("### Set PREBOOT to $(%s): \"%s\"\n",
- cmd_name, cmd ? cmd : "<<NULL>>");
-#endif
- *kbd_data = *suffix;
- return ((uchar *)cmd);
- }
- }
-#if 0
- printf ("### Delete PREBOOT\n");
-#endif
- *kbd_data = '\0';
- return (NULL);
-}
-
-int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- uchar kbd_data[KEYBD_DATALEN];
- char keybd_env[2 * KEYBD_DATALEN + 1];
- int i;
-
- /* Read keys */
- get_pressed_keys(kbd_data);
- puts ("Keys:");
- for (i = 0; i < KEYBD_DATALEN; ++i) {
- sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
- printf (" %02x", kbd_data[i]);
- }
- putc ('\n');
- setenv ("keybd", keybd_env);
- return 0;
-}
-
-U_BOOT_CMD(
- kbd, 1, 1, do_kbd,
- "read keyboard status",
- ""
-);
-
-#endif /* DELTA_CHECK_KEYBD */
-
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
- gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
- gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
- gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
- gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-
- return 0;
-}
-
-void i2c_init_board()
-{
- writel(readl(CKENB) | (CKENB_4_I2C), CKENB);
-
- /* setup I2C GPIO's */
- writel(0x801, GPIO32); /* SCL = Alt. Fkt. 1 */
- writel(0x801, GPIO33); /* SDA = Alt. Fkt. 1 */
-}
-
-/* initialize the DA9030 Power Controller */
-static void init_DA9030()
-{
- uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
-
- writel(readl(CKENB) | CKENB_7_GPIO, CKENB);
- udelay(100);
-
- /* Rising Edge on EXTON to reset DA9030 */
- writel(0x8800, GPIO17); /* configure GPIO17, no pullup, -down */
- writel(readl(GPDR0) | (1<<17), GPDR0); /* GPIO17 is output */
- writel((1<<17), GSDR0);
- writel((1<<17), GPCR0); /* drive GPIO17 low */
- writel((1<<17), GPSR0); /* drive GPIO17 high */
-
-#if CONFIG_SYS_DA9030_EXTON_DELAY
- udelay((unsigned long) CONFIG_SYS_DA9030_EXTON_DELAY); /* wait for DA9030 */
-#endif
- writel((1<<17), GPCR0); /* drive GPIO17 low */
-
- /* reset the watchdog and go active (0xec) */
- val = (SYS_CONTROL_A_HWRES_ENABLE |
- (0x6<<4) |
- SYS_CONTROL_A_WDOG_ACTION |
- SYS_CONTROL_A_WATCHDOG);
- if(i2c_write(addr, SYS_CONTROL_A, 1, &val, 1)) {
- printf("Error accessing DA9030 via i2c.\n");
- return;
- }
-
- val = 0x80;
- if(i2c_write(addr, IRQ_MASK_B, 1, &val, 1)) {
- printf("Error accessing DA9030 via i2c.\n");
- return;
- }
-
- i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
- i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */
- i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */
- i2c_reg_write(addr, LDO6_SIMCP, 0x3e); /* LDO6=3,2V, SIMCP = 5V support */
- i2c_reg_write(addr, LDO7_8, 0xc9); /* LDO7=2,7V, LDO8=3,0V */
- i2c_reg_write(addr, LDO9_12, 0xec); /* LDO9=3,0V, LDO12=3,2V */
- i2c_reg_write(addr, BUCK, 0x0c); /* Buck=1.2V */
- i2c_reg_write(addr, REG_CONTROL_2_98, 0x7f); /* All LDO'S on 8,9,10,11,12,14 */
- i2c_reg_write(addr, LDO_10_11, 0xcc); /* LDO10=3.0V LDO11=3.0V */
- i2c_reg_write(addr, LDO_15, 0xae); /* LDO15=1.8V, dislock first 3bit */
- i2c_reg_write(addr, LDO_14_16, 0x05); /* LDO14=2.8V, LDO16=NB */
- i2c_reg_write(addr, LDO_18_19, 0x9c); /* LDO18=3.0V, LDO19=2.7V */
- i2c_reg_write(addr, LDO_17_SIMCP0, 0x2c); /* LDO17=3.0V, SIMCP=3V support */
- i2c_reg_write(addr, BUCK2_DVC1, 0x9a); /* Buck2=1.5V plus Update support of 520 MHz */
- i2c_reg_write(addr, REG_CONTROL_2_18, 0x43); /* Ball on */
- i2c_reg_write(addr, MISC_CONTROLB, 0x08); /* session valid enable */
- i2c_reg_write(addr, USBPUMP, 0xc1); /* start pump, ignore HW signals */
-
- val = i2c_reg_read(addr, STATUS);
- if(val & STATUS_CHDET)
- printf("Charger detected, turning on LED.\n");
- else {
- printf("No charger detetected.\n");
- /* undervoltage? print error and power down */
- }
-}
-
-
-#if 0
-/* reset the DA9030 watchdog */
-void hw_watchdog_reset(void)
-{
- uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
- val = i2c_reg_read(addr, SYS_CONTROL_A);
- val |= SYS_CONTROL_A_WATCHDOG;
- i2c_reg_write(addr, SYS_CONTROL_A, val);
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/delta/lowlevel_init.S b/board/delta/lowlevel_init.S
deleted file mode 100644
index 1664f3b..0000000
--- a/board/delta/lowlevel_init.S
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * (C) Copyright 2006 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE
-
-.macro wait time
- ldr r2, =OSCR
- mov r3, #0
- str r3, [r2]
-0:
- ldr r3, [r2]
- cmp r3, \time
- bls 0b
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
- /* Set up GPIO pins first */
- mov r10, lr
-
- /* Configure GPIO Pins 97, 98 UART1 / altern. Fkt. 1 */
- ldr r0, =GPIO97
- ldr r1, =0x801
- str r1, [r0]
-
- ldr r0, =GPIO98
- ldr r1, =0x801
- str r1, [r0]
-
- /* tebrandt - ASCR, clear the RDH bit */
- ldr r0, =ASCR
- ldr r1, [r0]
- bic r1, r1, #0x80000000
- str r1, [r0]
-
-mem_init:
- /* Configure ACCR Register - enable DMEMC Clock at 260 / 2 MHz */
- ldr r0, =ACCR
- ldr r1, [r0]
- orr r1, r1, #0x3000
- str r1, [r0]
- ldr r1, [r0]
-
- /* 2. Programm MDCNFG, leaving DMCEN de-asserted */
- ldr r0, =MDCNFG
- ldr r1, =(MDCNFG_DMAP | MDCNFG_DTYPE | MDCNFG_DTC_2 | MDCNFG_DCSE0 | MDCNFG_DRAC_13)
- /* ldr r1, =0x80000403 */
- str r1, [r0]
- ldr r1, [r0] /* delay until written */
-
- /* 3. wait nop power up waiting period (200ms)
- * optimization: Steps 4+6 can be done during this
- */
- wait #0x300
-
- /* 4. Perform an initial Rcomp-calibration cycle */
- ldr r0, =RCOMP
- ldr r1, =0x80000000
- str r1, [r0]
- ldr r1, [r0] /* delay until written */
- /* missing: program for automatic rcomp evaluation cycles */
-
- /* 5. DDR DRAM strobe delay calibration */
- ldr r0, =DDR_HCAL
- ldr r1, =0x88000007
- str r1, [r0]
- wait #5
- ldr r1, [r0] /* delay until written */
-
- /* Set MDMRS */
- ldr r0, =MDMRS
- ldr r1, =0x60000033
- str r1, [r0]
- wait #300
-
- /* Configure MDREFR */
- ldr r0, =MDREFR
- ldr r1, =0x00000006
- str r1, [r0]
- ldr r1, [r0]
-
- /* Enable the dynamic memory controller */
- ldr r0, =MDCNFG
- ldr r1, [r0]
- orr r1, r1, #MDCNFG_DMCEN
- str r1, [r0]
-
-#ifndef CONFIG_SYS_SKIP_DRAM_SCRUB
- /* scrub/init SDRAM if enabled/present */
- ldr r8, =CONFIG_SYS_DRAM_BASE /* base address of SDRAM (CONFIG_SYS_DRAM_BASE) */
- ldr r9, =CONFIG_SYS_DRAM_SIZE /* size of memory to scrub (CONFIG_SYS_DRAM_SIZE) */
- mov r0, #0 /* scrub with 0x0000:0000 */
- mov r1, #0
- mov r2, #0
- mov r3, #0
- mov r4, #0
- mov r5, #0
- mov r6, #0
- mov r7, #0
-10: /* fastScrubLoop */
- subs r9, r9, #32 /* 8 words/line */
- stmia r8!, {r0-r7}
- beq 15f
- b 10b
-#endif /* CONFIG_SYS_SKIP_DRAM_SCRUB */
-
-15:
- /* Mask all interrupts */
- mov r1, #0
- mcr p6, 0, r1, c1, c0, 0 @ ICMR
-
- /* Disable software and data breakpoints */
- mov r0, #0
- mcr p15,0,r0,c14,c8,0 /* ibcr0 */
- mcr p15,0,r0,c14,c9,0 /* ibcr1 */
- mcr p15,0,r0,c14,c4,0 /* dbcon */
-
- /* Enable all debug functionality */
- mov r0,#0x80000000
- mcr p14,0,r0,c10,c0,0 /* dcsr */
-
-endlowlevel_init:
- mov pc, lr
diff --git a/board/delta/nand.c b/board/delta/nand.c
deleted file mode 100644
index 119a587..0000000
--- a/board/delta/nand.c
+++ /dev/null
@@ -1,558 +0,0 @@
-/*
- * (C) Copyright 2006 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_CMD_NAND)
-
-#include <nand.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_SYS_DFC_DEBUG1
-# define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
-#else
-# define DFC_DEBUG1(fmt, args...)
-#endif
-
-#ifdef CONFIG_SYS_DFC_DEBUG2
-# define DFC_DEBUG2(fmt, args...) printf(fmt, ##args)
-#else
-# define DFC_DEBUG2(fmt, args...)
-#endif
-
-#ifdef CONFIG_SYS_DFC_DEBUG3
-# define DFC_DEBUG3(fmt, args...) printf(fmt, ##args)
-#else
-# define DFC_DEBUG3(fmt, args...)
-#endif
-
-/* These really don't belong here, as they are specific to the NAND Model */
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr delta_bbt_descr = {
- .options = 0,
- .offs = 0,
- .len = 2,
- .pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout delta_oob = {
- .eccbytes = 6,
- .eccpos = {2, 3, 4, 5, 6, 7},
- .oobfree = { {8, 2}, {12, 4} }
-};
-
-/*
- * not required for Monahans DFC
- */
-static void dfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- return;
-}
-
-#if 0
-/* read device ready pin */
-static int dfc_device_ready(struct mtd_info *mtdinfo)
-{
- if(NDSR & NDSR_RDY)
- return 1;
- else
- return 0;
- return 0;
-}
-#endif
-
-/*
- * Write buf to the DFC Controller Data Buffer
- */
-static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
- unsigned long bytes_multi = len & 0xfffffffc;
- unsigned long rest = len & 0x3;
- unsigned long *long_buf;
- int i;
-
- DFC_DEBUG2("dfc_write_buf: writing %d bytes starting with 0x%x.\n", len, *((unsigned long*) buf));
- if(bytes_multi) {
- for(i=0; i<bytes_multi; i+=4) {
- long_buf = (unsigned long*) &buf[i];
- writel(*long_buf, NDDB);
- }
- }
- if(rest) {
- printf("dfc_write_buf: ERROR, writing non 4-byte aligned data.\n");
- }
- return;
-}
-
-
-static void dfc_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
-{
- int i=0, j;
-
- /* we have to be carefull not to overflow the buffer if len is
- * not a multiple of 4 */
- unsigned long bytes_multi = len & 0xfffffffc;
- unsigned long rest = len & 0x3;
- unsigned long *long_buf;
-
- DFC_DEBUG3("dfc_read_buf: reading %d bytes.\n", len);
- /* if there are any, first copy multiple of 4 bytes */
- if(bytes_multi) {
- for(i=0; i<bytes_multi; i+=4) {
- long_buf = (unsigned long*) &buf[i];
- *long_buf = readl(NDDB);
- }
- }
-
- /* ...then the rest */
- if(rest) {
- unsigned long rest_data = NDDB;
- for(j=0;j<rest; j++)
- buf[i+j] = (u_char) ((rest_data>>j) & 0xff);
- }
-
- return;
-}
-
-/*
- * read a word. Not implemented as not used in NAND code.
- */
-static u16 dfc_read_word(struct mtd_info *mtd)
-{
- printf("dfc_read_word: UNIMPLEMENTED.\n");
- return 0;
-}
-
-/* global var, too bad: mk@tbd: move to ->priv pointer */
-static unsigned long read_buf = 0;
-static int bytes_read = -1;
-
-/*
- * read a byte from NDDB Because we can only read 4 bytes from NDDB at
- * a time, we buffer the remaining bytes. The buffer is reset when a
- * new command is sent to the chip.
- *
- * WARNING:
- * This function is currently only used to read status and id
- * bytes. For these commands always 8 bytes need to be read from
- * NDDB. So we read and discard these bytes right now. In case this
- * function is used for anything else in the future, we must check
- * what was the last command issued and read the appropriate amount of
- * bytes respectively.
- */
-static u_char dfc_read_byte(struct mtd_info *mtd)
-{
- unsigned char byte;
- unsigned long dummy;
-
- if(bytes_read < 0) {
- read_buf = readl(NDDB);
- dummy = readl(NDDB);
- bytes_read = 0;
- }
- byte = (unsigned char) (read_buf>>(8 * bytes_read++));
- if(bytes_read >= 4)
- bytes_read = -1;
-
- DFC_DEBUG2("dfc_read_byte: byte %u: 0x%x of (0x%x).\n", bytes_read - 1, byte, read_buf);
- return byte;
-}
-
-/* calculate delta between OSCR values start and now */
-static unsigned long get_delta(unsigned long start)
-{
- unsigned long cur = readl(OSCR);
-
- if(cur < start) /* OSCR overflowed */
- return (cur + (start^0xffffffff));
- else
- return (cur - start);
-}
-
-/* delay function, this doesn't belong here */
-static void wait_us(unsigned long us)
-{
- unsigned long start = readl(OSCR);
- us = DIV_ROUND_UP(us * OSCR_CLK_FREQ, 1000);
-
- while (get_delta(start) < us) {
- /* do nothing */
- }
-}
-
-static void dfc_clear_nddb(void)
-{
- writel(readl(NDCR) & ~NDCR_ND_RUN, NDCR);
- wait_us(CONFIG_SYS_NAND_OTHER_TO);
-}
-
-/* wait_event with timeout */
-static unsigned long dfc_wait_event(unsigned long event)
-{
- unsigned long ndsr, timeout, start = readl(OSCR);
-
- if(!event)
- return 0xff000000;
- else if(event & (NDSR_CS0_CMDD | NDSR_CS0_BBD))
- timeout = DIV_ROUND_UP(CONFIG_SYS_NAND_PROG_ERASE_TO
- * OSCR_CLK_FREQ, 1000);
- else
- timeout = DIV_ROUND_UP(CONFIG_SYS_NAND_OTHER_TO
- * OSCR_CLK_FREQ, 1000);
-
- while(1) {
- ndsr = readl(NDSR);
- if(ndsr & event) {
- writel(readl(NDSR) | event, NDSR);
- break;
- }
- if(get_delta(start) > timeout) {
- DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%lx.\n", event);
- return 0xff000000;
- }
-
- }
- return ndsr;
-}
-
-/* we don't always wan't to do this */
-static void dfc_new_cmd(void)
-{
- int retry = 0;
- unsigned long status;
-
- while(retry++ <= CONFIG_SYS_NAND_SENDCMD_RETRY) {
- /* Clear NDSR */
- writel(0xfff, NDSR);
-
- /* set NDCR[NDRUN] */
- if (!(readl(NDCR) & NDCR_ND_RUN))
- writel(readl(NDCR) | NDCR_ND_RUN, NDCR);
-
- status = dfc_wait_event(NDSR_WRCMDREQ);
-
- if(status & NDSR_WRCMDREQ)
- return;
-
- DFC_DEBUG2("dfc_new_cmd: FAILED to get WRITECMDREQ, retry: %d.\n", retry);
- dfc_clear_nddb();
- }
- DFC_DEBUG1("dfc_new_cmd: giving up after %d retries.\n", retry);
-}
-
-/* this function is called after Programm and Erase Operations to
- * check for success or failure */
-static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this)
-{
- unsigned long ndsr=0, event=0;
- int state = this->state;
-
- if(state == FL_WRITING) {
- event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
- } else if(state == FL_ERASING) {
- event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
- }
-
- ndsr = dfc_wait_event(event);
-
- if((ndsr & NDSR_CS0_BBD) || (ndsr & 0xff000000))
- return(0x1); /* Status Read error */
- return 0;
-}
-
-/* cmdfunc send commands to the DFC */
-static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command,
- int column, int page_addr)
-{
- /* register struct nand_chip *this = mtd->priv; */
- unsigned long ndcb0=0, ndcb1=0, ndcb2=0, event=0;
-
- /* clear the ugly byte read buffer */
- bytes_read = -1;
- read_buf = 0;
-
- switch (command) {
- case NAND_CMD_READ0:
- DFC_DEBUG3("dfc_cmdfunc: NAND_CMD_READ0, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
- dfc_new_cmd();
- ndcb0 = (NAND_CMD_READ0 | (4<<16));
- column >>= 1; /* adjust for 16 bit bus */
- ndcb1 = (((column>>1) & 0xff) |
- ((page_addr<<8) & 0xff00) |
- ((page_addr<<8) & 0xff0000) |
- ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
- event = NDSR_RDDREQ;
- goto write_cmd;
- case NAND_CMD_READ1:
- DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READ1 unimplemented!\n");
- goto end;
- case NAND_CMD_READOOB:
- DFC_DEBUG1("dfc_cmdfunc: NAND_CMD_READOOB unimplemented!\n");
- goto end;
- case NAND_CMD_READID:
- dfc_new_cmd();
- DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READID.\n");
- ndcb0 = (NAND_CMD_READID | (3 << 21) | (1 << 16)); /* addr cycles*/
- event = NDSR_RDDREQ;
- goto write_cmd;
- case NAND_CMD_PAGEPROG:
- /* sent as a multicommand in NAND_CMD_SEQIN */
- DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_PAGEPROG empty due to multicmd.\n");
- goto end;
- case NAND_CMD_ERASE1:
- DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE1, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
- dfc_new_cmd();
- ndcb0 = (0xd060 | (1<<25) | (2<<21) | (1<<19) | (3<<16));
- ndcb1 = (page_addr & 0x00ffffff);
- goto write_cmd;
- case NAND_CMD_ERASE2:
- DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE2 empty due to multicmd.\n");
- goto end;
- case NAND_CMD_SEQIN:
- /* send PAGE_PROG command(0x1080) */
- dfc_new_cmd();
- DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
- ndcb0 = (0x1080 | (1<<25) | (1<<21) | (1<<19) | (4<<16));
- column >>= 1; /* adjust for 16 bit bus */
- ndcb1 = (((column>>1) & 0xff) |
- ((page_addr<<8) & 0xff00) |
- ((page_addr<<8) & 0xff0000) |
- ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
- event = NDSR_WRDREQ;
- goto write_cmd;
- case NAND_CMD_STATUS:
- DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_STATUS.\n");
- dfc_new_cmd();
- ndcb0 = NAND_CMD_STATUS | (4<<21);
- event = NDSR_RDDREQ;
- goto write_cmd;
- case NAND_CMD_RESET:
- DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_RESET.\n");
- ndcb0 = NAND_CMD_RESET | (5<<21);
- event = NDSR_CS0_CMDD;
- goto write_cmd;
- default:
- printk("dfc_cmdfunc: error, unsupported command.\n");
- goto end;
- }
-
- write_cmd:
- writel(ndcb0, NDCB0);
- writel(ndcb1, NDCB0);
- writel(ndcb2, NDCB0);
-
- /* wait_event: */
- dfc_wait_event(event);
- end:
- return;
-}
-
-static void dfc_gpio_init(void)
-{
- DFC_DEBUG2("Setting up DFC GPIO's.\n");
-
- /* no idea what is done here, see zylonite.c */
- writel(0x1, GPIO4);
-
- writel(0x00000001, DF_ALE_nWE1);
- writel(0x00000001, DF_ALE_nWE2);
- writel(0x00000001, DF_nCS0);
- writel(0x00000001, DF_nCS1);
- writel(0x00000001, DF_nWE);
- writel(0x00000001, DF_nRE);
- writel(0x00000001, DF_IO0);
- writel(0x00000001, DF_IO8);
- writel(0x00000001, DF_IO1);
- writel(0x00000001, DF_IO9);
- writel(0x00000001, DF_IO2);
- writel(0x00000001, DF_IO10);
- writel(0x00000001, DF_IO3);
- writel(0x00000001, DF_IO11);
- writel(0x00000001, DF_IO4);
- writel(0x00000001, DF_IO12);
- writel(0x00000001, DF_IO5);
- writel(0x00000001, DF_IO13);
- writel(0x00000001, DF_IO6);
- writel(0x00000001, DF_IO14);
- writel(0x00000001, DF_IO7);
- writel(0x00000001, DF_IO15);
-
- writel(0x1901, DF_nWE);
- writel(0x1901, DF_nRE);
- writel(0x1900, DF_CLE_nOE);
- writel(0x1901, DF_ALE_nWE1);
- writel(0x1900, DF_INT_RnB);
-}
-
-/*
- * Board-specific NAND initialization. The following members of the
- * argument are board-specific (per include/linux/mtd/nand_new.h):
- * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
- * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
- * - hwcontrol: hardwarespecific function for accesing control-lines
- * - dev_ready: hardwarespecific function for accesing device ready/busy line
- * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
- * only be provided if a hardware ECC is available
- * - ecc.mode: mode of ecc, see defines
- * - chip_delay: chip dependent delay for transfering data from array to
- * read regs (tR)
- * - options: various chip options. They can partly be set to inform
- * nand_scan about special functionality. See the defines for further
- * explanation
- * Members with a "?" were not set in the merged testing-NAND branch,
- * so they are not set here either.
- */
-int board_nand_init(struct nand_chip *nand)
-{
- unsigned long tCH, tCS, tWH, tWP, tRH, tRP, tRP_high, tR, tWHR, tAR;
-
- /* set up GPIO Control Registers */
- dfc_gpio_init();
-
- /* turn on the NAND Controller Clock (104 MHz @ D0) */
- writel(readl(CKENA) | (CKENA_4_NAND | CKENA_9_SMC), CKENA);
-
-#undef CONFIG_SYS_TIMING_TIGHT
-#ifndef CONFIG_SYS_TIMING_TIGHT
- tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1),
- DFC_MAX_tCH);
- tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1),
- DFC_MAX_tCS);
- tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US) + 1),
- DFC_MAX_tWH);
- tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US) + 1),
- DFC_MAX_tWP);
- tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US) + 1),
- DFC_MAX_tRH);
- tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US) + 1),
- DFC_MAX_tRP);
- tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) + 1),
- DFC_MAX_tR);
- tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) + 1),
- DFC_MAX_tWHR);
- tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) + 1),
- DFC_MAX_tAR);
-#else /* this is the tight timing */
-
- tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US)),
- DFC_MAX_tCH);
- tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US)),
- DFC_MAX_tCS);
- tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US)),
- DFC_MAX_tWH);
- tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US)),
- DFC_MAX_tWP);
- tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US)),
- DFC_MAX_tRH);
- tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US)),
- DFC_MAX_tRP);
- tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) - tCH - 2),
- DFC_MAX_tR);
- tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) - tCH - 2),
- DFC_MAX_tWHR);
- tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) - 2),
- DFC_MAX_tAR);
-#endif /* CONFIG_SYS_TIMING_TIGHT */
-
-
- DFC_DEBUG2("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR);
-
- /* tRP value is split in the register */
- if(tRP & (1 << 4)) {
- tRP_high = 1;
- tRP &= ~(1 << 4);
- } else {
- tRP_high = 0;
- }
-
- writel((tCH << 19) |
- (tCS << 16) |
- (tWH << 11) |
- (tWP << 8) |
- (tRP_high << 6) |
- (tRH << 3) |
- (tRP << 0),
- NDTR0CS0);
-
- writel((tR << 16) |
- (tWHR << 4) |
- (tAR << 0),
- NDTR1CS0);
-
- /* If it doesn't work (unlikely) think about:
- * - ecc enable
- * - chip select don't care
- * - read id byte count
- *
- * Intentionally enabled by not setting bits:
- * - dma (DMA_EN)
- * - page size = 512
- * - cs don't care, see if we can enable later!
- * - row address start position (after second cycle)
- * - pages per block = 32
- * - ND_RDY : clears command buffer
- */
- /* NDCR_NCSX | /\* Chip select busy don't care *\/ */
-
- writel(NDCR_SPARE_EN | /* use the spare area */
- NDCR_DWIDTH_C | /* 16bit DFC data bus width */
- NDCR_DWIDTH_M | /* 16 bit Flash device data bus width */
- (2 << 16) | /* read id count = 7 ???? mk@tbd */
- NDCR_ND_ARB_EN | /* enable bus arbiter */
- NDCR_RDYM | /* flash device ready ir masked */
- NDCR_CS0_PAGEDM | /* ND_nCSx page done ir masked */
- NDCR_CS1_PAGEDM |
- NDCR_CS0_CMDDM | /* ND_CSx command done ir masked */
- NDCR_CS1_CMDDM |
- NDCR_CS0_BBDM | /* ND_CSx bad block detect ir masked */
- NDCR_CS1_BBDM |
- NDCR_DBERRM | /* double bit error ir masked */
- NDCR_SBERRM | /* single bit error ir masked */
- NDCR_WRDREQM | /* write data request ir masked */
- NDCR_RDDREQM | /* read data request ir masked */
- NDCR_WRCMDREQM, /* write command request ir masked */
- NDCR);
-
-
- /* wait 10 us due to cmd buffer clear reset */
- /* wait(10); */
-
-
- nand->cmd_ctrl = dfc_hwcontrol;
-/* nand->dev_ready = dfc_device_ready; */
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->ecc.layout = &delta_oob;
- nand->options = NAND_BUSWIDTH_16;
- nand->waitfunc = dfc_wait;
- nand->read_byte = dfc_read_byte;
- nand->read_word = dfc_read_word;
- nand->read_buf = dfc_read_buf;
- nand->write_buf = dfc_write_buf;
-
- nand->cmdfunc = dfc_cmdfunc;
- nand->badblock_pattern = &delta_bbt_descr;
- return 0;
-}
-
-#endif
diff --git a/boards.cfg b/boards.cfg
index 0f3292f..31c4bf0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -65,7 +65,6 @@ balloon3 arm pxa
cerf250 arm pxa
cradle arm pxa
csb226 arm pxa
-delta arm pxa
innokom arm pxa
lubbock arm pxa
palmld arm pxa
diff --git a/include/configs/delta.h b/include/configs/delta.h
deleted file mode 100644
index d53acbf..0000000
--- a/include/configs/delta.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Configuation settings for the Delta board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_CPU_MONAHANS 1 /* Intel Monahan CPU */
-#define CONFIG_CPU_PXA320
-#define CONFIG_DELTA 1 /* Delta board */
-
-/* #define CONFIG_LCD 1 */
-#ifdef CONFIG_LCD
-#define CONFIG_SHARP_LM8V31
-#endif
-#define BOARD_LATE_INIT 1
-
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-#undef TURN_ON_ETHERNET
-#ifdef TURN_ON_ETHERNET
-# define CONFIG_DRIVER_SMC91111 1
-# define CONFIG_SMC91111_BASE 0x14000300
-# define CONFIG_SMC91111_EXT_PHY
-# define CONFIG_SMC_USE_32_BIT
-# undef CONFIG_SMC_USE_IOFUNCS /* just for use with the kernel */
-#endif
-
-#define CONFIG_HARD_I2C 1 /* required for DA9030 access */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE 1 /* I2C controllers address */
-#define DA9030_I2C_ADDR 0x49 /* I2C address of DA9030 */
-#define CONFIG_SYS_DA9030_EXTON_DELAY 100000 /* wait x us after DA9030 reset via EXTON */
-#define CONFIG_SYS_I2C_INIT_BOARD 1
-/* #define CONFIG_HW_WATCHDOG 1 /\* Required for hitting the DA9030 WD *\/ */
-
-#define DELTA_CHECK_KEYBD 1 /* check for keys pressed during boot */
-#define CONFIG_PREBOOT "\0"
-
-#ifdef DELTA_CHECK_KEYBD
-# define KEYBD_DATALEN 4 /* we have four keys */
-# define KEYBD_KP_DKIN0 0x1 /* vol+ */
-# define KEYBD_KP_DKIN1 0x2 /* vol- */
-# define KEYBD_KP_DKIN2 0x3 /* multi */
-# define KEYBD_KP_DKIN5 0x4 /* SWKEY_GN */
-#endif /* DELTA_CHECK_KEYBD */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifdef TURN_ON_ETHERNET
-
-#define CONFIG_CMD_PING
-
-#else
-
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_I2C
-
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-
-#endif
-
-/* USB */
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_DOS_PARTITION 1
-
-#include <asm/arch/pxa-regs.h> /* for OHCI_REGS_BASE */
-
-#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE OHCI_REGS_BASE
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "delta"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
-
-#define CONFIG_BOOTDELAY -1
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_IPADDR 192.168.0.21
-#define CONFIG_SERVERIP 192.168.0.250
-#define CONFIG_BOOTCOMMAND "bootm 80000"
-#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_TIMESTAMP
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER 1
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#endif
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-
-#define CONFIG_SYS_MEMTEST_START 0x80400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x80800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
-
-#define CONFIG_SYS_HZ 1000
-
-/* Monahans Core Frequency */
-#define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */
-#define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */
-
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_SYS_MMC_BASE 0xF0000000
-#endif
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0x80000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x1000000 /* 64 MB */
-#define PHYS_SDRAM_2 0x81000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x1000000 /* 64 MB */
-#define PHYS_SDRAM_3 0x82000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x1000000 /* 64 MB */
-#define PHYS_SDRAM_4 0x83000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x1000000 /* 64 MB */
-
-#define CONFIG_SYS_DRAM_BASE 0x80000000 /* at CS0 */
-#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB Ram */
-
-#undef CONFIG_SYS_SKIP_DRAM_SCRUB
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-/*
- * NAND Flash
- */
-#define CONFIG_SYS_NAND0_BASE 0x0 /* 0x43100040 */ /* 0x10000000 */
-#undef CONFIG_SYS_NAND1_BASE
-
-#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-
-/* nand timeout values */
-#define CONFIG_SYS_NAND_PROG_ERASE_TO 3000
-#define CONFIG_SYS_NAND_OTHER_TO 100
-#define CONFIG_SYS_NAND_SENDCMD_RETRY 3
-#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */
-
-/* NAND Timing Parameters (in ns) */
-#define NAND_TIMING_tCH 10
-#define NAND_TIMING_tCS 0
-#define NAND_TIMING_tWH 20
-#define NAND_TIMING_tWP 40
-
-#define NAND_TIMING_tRH 20
-#define NAND_TIMING_tRP 40
-
-#define NAND_TIMING_tR 11123
-#define NAND_TIMING_tWHR 100
-#define NAND_TIMING_tAR 10
-
-/* NAND debugging */
-#define CONFIG_SYS_DFC_DEBUG1 /* usefull */
-#undef CONFIG_SYS_DFC_DEBUG2 /* noisy */
-#undef CONFIG_SYS_DFC_DEBUG3 /* extremly noisy */
-
-#define CONFIG_MTD_DEBUG
-#define CONFIG_MTD_DEBUG_VERBOSE 1
-
-#define CONFIG_SYS_NO_FLASH 1
-
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_OFFSET 0x40000
-#define CONFIG_ENV_OFFSET_REDUND 0x44000
-#define CONFIG_ENV_SIZE 0x4000
-
-#endif /* __CONFIG_H */