summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMarek Vasut <marek.vasut@gmail.com>2011-09-28 02:19:57 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2011-12-06 23:59:40 +0100
commit55723954829f30cf148924ee55d10b1662551edc (patch)
tree9272d59f87ae6d61c70b2127d4e385fc1183fa34
parent5acc90729488328665ebee7bc7ae2fb6c9e08c3a (diff)
downloadu-boot-imx-55723954829f30cf148924ee55d10b1662551edc.zip
u-boot-imx-55723954829f30cf148924ee55d10b1662551edc.tar.gz
u-boot-imx-55723954829f30cf148924ee55d10b1662551edc.tar.bz2
Efika: Configure additional regulators for HDMI output
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
-rw-r--r--board/efikamx/efikamx.c15
1 files changed, 10 insertions, 5 deletions
diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c
index b78bf6c..3d2cc1a 100644
--- a/board/efikamx/efikamx.c
+++ b/board/efikamx/efikamx.c
@@ -226,7 +226,7 @@ static void power_init(void)
/* Set core voltage to 1.1V */
pmic_reg_read(p, REG_SW_0, &val);
- val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
+ val = (val & ~SWx_VOLT_MASK) | SWx_1_200V;
pmic_reg_write(p, REG_SW_0, val);
/* Setup VCC (SW2) to 1.25 */
@@ -260,18 +260,23 @@ static void power_init(void)
(SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
pmic_reg_write(p, REG_SW_5, val);
- /* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */
+ /* Set VDIG to 1.8V, VGEN3 to 1.8V, VCAM to 2.6V */
pmic_reg_read(p, REG_SETTING_0, &val);
val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
- val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6;
+ val |= VDIG_1_8 | VGEN3_1_8 | VCAM_2_6;
pmic_reg_write(p, REG_SETTING_0, val);
/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
pmic_reg_read(p, REG_SETTING_1, &val);
val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
- val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775;
+ val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775 | VGEN1_1_2 | VGEN2_3_15;
pmic_reg_write(p, REG_SETTING_1, val);
+ /* Enable VGEN1, VGEN2, VDIG, VPLL */
+ pmic_reg_read(p, REG_MODE_0, &val);
+ val |= VGEN1EN | VDIGEN | VGEN2EN | VPLLEN;
+ pmic_reg_write(p, REG_MODE_0, val);
+
/* Configure VGEN3 and VCAM regulators to use external PNP */
val = VGEN3CONFIG | VCAMCONFIG;
pmic_reg_write(p, REG_MODE_1, val);
@@ -279,7 +284,7 @@ static void power_init(void)
/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
- VVIDEOEN | VAUDIOEN | VSDEN;
+ VVIDEOEN | VAUDIOEN | VSDEN;
pmic_reg_write(p, REG_MODE_1, val);
pmic_reg_read(p, REG_POWER_CTL2, &val);