summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-05-12 21:50:16 +0000
committerwdenk <wdenk>2003-05-12 21:50:16 +0000
commit45219c46605f9b933ab454738ee4ce543d5b70d6 (patch)
treedae6530a55b6b7b5a6974a5c557637419256a2ec
parentf7de16ae259fd01afe1d342dd0247dc9d3911edd (diff)
downloadu-boot-imx-45219c46605f9b933ab454738ee4ce543d5b70d6.zip
u-boot-imx-45219c46605f9b933ab454738ee4ce543d5b70d6.tar.gz
u-boot-imx-45219c46605f9b933ab454738ee4ce543d5b70d6.tar.bz2
Patch by Mathijs Haarman, 08 May 2003:
Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
-rw-r--r--CHANGELOG3
-rw-r--r--MAKEALL2
-rw-r--r--README12
-rw-r--r--doc/README.Purple24
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/lan91c96.c858
-rw-r--r--drivers/lan91c96.h635
-rw-r--r--include/configs/lubbock.h4
-rw-r--r--lib_arm/board.c10
-rw-r--r--post/sysmon.c4
-rw-r--r--post/uart.c2
11 files changed, 1544 insertions, 12 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 1e44b40..d1ed914 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
Changes since U-Boot 0.3.1:
======================================================================
+* Patch by Mathijs Haarman, 08 May 2003:
+ Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
+
* Fix problem with usage of "true" (undefined in current versions of bfd.h)
* Add support for Promess ATC board
diff --git a/MAKEALL b/MAKEALL
index 030d5c2..3e84b96 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -67,7 +67,7 @@ LIST_824x=" \
#########################################################################
LIST_8260=" \
- ATC cogent_mpc8260 CPU86 ep8260 \
+ atc cogent_mpc8260 CPU86 ep8260 \
gw8260 hymod IPHASE4539 MPC8260ADS \
MPC8266ADS PM826 ppmc8260 RPXsuper \
rsdproto sacsng sbc8260 SCM \
diff --git a/README b/README
index 1deb82c..35de0e2 100644
--- a/README
+++ b/README
@@ -695,6 +695,18 @@ The following options need to be configured:
CONFIG_NS8382X
Support for National dp8382[01] gigabit chips.
+- NETWORK Support (other):
+
+ CONFIG_DRIVER_LAN91C96
+ Support for SMSC's LAN91C96 chips.
+
+ CONFIG_LAN91C96_BASE
+ Define this to hold the physical address
+ of the LAN91C96's I/O space
+
+ CONFIG_LAN91C96_USE_32_BIT
+ Define this to enable 32 bit addressing
+
- USB Support:
At the moment only the UHCI host controller is
supported (PIP405, MIP405); define
diff --git a/doc/README.Purple b/doc/README.Purple
index c05e0ff..dc3e00d 100644
--- a/doc/README.Purple
+++ b/doc/README.Purple
@@ -7,22 +7,32 @@ Installation Instructions:
------
|x |
| x|
- |x |
- | X|
+ |x |
+ | X|
------
Put the s3 switch into the following position:
- 1 0
+ 1 0
+ ------
+ | x |
+ | x |
+ | x|
+ | x|
+ ------
+
+ Put the s4 switch into the following position:
+
+ 1 0
------
|x |
|x |
- |x |
+ |x |
|x |
|x |
| x|
| x|
- |x |
+ |x |
------
2. Connect to the serial console and to the BDI. Power on. On the
@@ -54,8 +64,8 @@ Installation Instructions:
------
| x|
| x|
- |x |
- | X|
+ |x |
+ | X|
------
Power on. U-Boot should come up.
diff --git a/drivers/Makefile b/drivers/Makefile
index b3857a7..2101a27 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -30,7 +30,7 @@ LIB = libdrivers.a
OBJS = 3c589.o 5701rls.o at91rm9200_ether.o \
bcm570x.o bcm570x_autoneg.o \
cfb_console.o cs8900.o ct69000.o dc2114x.o \
- eepro100.o i8042.o inca-ip_sw.o \
+ eepro100.o i8042.o inca-ip_sw.o lan91c96.o\
natsemi.o ns16550.o ns8382x.o ns87308.o \
pci.o pci_auto.o pci_indirect.o \
pcnet.o plb2800_eth.o \
diff --git a/drivers/lan91c96.c b/drivers/lan91c96.c
new file mode 100644
index 0000000..76b0c53
--- /dev/null
+++ b/drivers/lan91c96.c
@@ -0,0 +1,858 @@
+/*------------------------------------------------------------------------
+ * lan91c96.c
+ * This is a driver for SMSC's LAN91C96 single-chip Ethernet device, based
+ * on the SMC91111 driver from U-boot.
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Rolf Offermanns <rof@sysgo.de>
+ *
+ * Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ * Developed by Simple Network Magic Corporation (SNMC)
+ * Copyright (C) 1996 by Erik Stahlman (ES)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Information contained in this file was obtained from the LAN91C96
+ * manual from SMC. To get a copy, if you really want one, you can find
+ * information under www.smsc.com.
+ *
+ *
+ * "Features" of the SMC chip:
+ * 6144 byte packet memory. ( for the 91C96 )
+ * EEPROM for configuration
+ * AUI/TP selection ( mine has 10Base2/10BaseT select )
+ *
+ * Arguments:
+ * io = for the base address
+ * irq = for the IRQ
+ *
+ * author:
+ * Erik Stahlman ( erik@vt.edu )
+ * Daris A Nevil ( dnevil@snmc.com )
+ *
+ *
+ * Hardware multicast code from Peter Cammaert ( pc@denkart.be )
+ *
+ * Sources:
+ * o SMSC LAN91C96 databook (www.smsc.com)
+ * o smc91111.c (u-boot driver)
+ * o smc9194.c (linux kernel driver)
+ * o lan91c96.c (Intel Diagnostic Manager driver)
+ *
+ * History:
+ * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
+ * for lan91c96
+ *---------------------------------------------------------------------------
+ */
+
+#include <common.h>
+#include <command.h>
+#include "lan91c96.h"
+#include <net.h>
+
+#ifdef CONFIG_DRIVER_LAN91C96
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+/*------------------------------------------------------------------------
+ *
+ * Configuration options, for the experienced user to change.
+ *
+ -------------------------------------------------------------------------*/
+
+/* Use power-down feature of the chip */
+#define POWER_DOWN 0
+
+/*
+ * Wait time for memory to be free. This probably shouldn't be
+ * tuned that much, as waiting for this means nothing else happens
+ * in the system
+*/
+#define MEMORY_WAIT_TIME 16
+
+#define SMC_DEBUG 0
+
+#if (SMC_DEBUG > 2 )
+#define PRINTK3(args...) printf(args)
+#else
+#define PRINTK3(args...)
+#endif
+
+#if SMC_DEBUG > 1
+#define PRINTK2(args...) printf(args)
+#else
+#define PRINTK2(args...)
+#endif
+
+#ifdef SMC_DEBUG
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+
+/*------------------------------------------------------------------------
+ *
+ * The internal workings of the driver. If you are changing anything
+ * here with the SMC stuff, you should have the datasheet and know
+ * what you are doing.
+ *
+ *------------------------------------------------------------------------
+ */
+#define CARDNAME "LAN91C96"
+
+#define SMC_BASE_ADDRESS CONFIG_LAN91C96_BASE
+
+#define SMC_DEV_NAME "LAN91C96"
+#define SMC_ALLOC_MAX_TRY 5
+#define SMC_TX_TIMEOUT 30
+
+#define ETH_ZLEN 60
+
+#ifdef CONFIG_LAN91C96_USE_32_BIT
+#define USE_32_BIT 1
+#else
+#undef USE_32_BIT
+#endif
+
+/*-----------------------------------------------------------------
+ *
+ * The driver can be entered at any of the following entry points.
+ *
+ *-----------------------------------------------------------------
+ */
+
+extern int eth_init (bd_t * bd);
+extern void eth_halt (void);
+extern int eth_rx (void);
+extern int eth_send (volatile void *packet, int length);
+static int smc_hw_init (void);
+
+/*
+ * This is called by register_netdev(). It is responsible for
+ * checking the portlist for the SMC9000 series chipset. If it finds
+ * one, then it will initialize the device, find the hardware information,
+ * and sets up the appropriate device parameters.
+ * NOTE: Interrupts are *OFF* when this procedure is called.
+ *
+ * NB:This shouldn't be static since it is referred to externally.
+ */
+int smc_init (void);
+
+/*
+ * This is called by unregister_netdev(). It is responsible for
+ * cleaning up before the driver is finally unregistered and discarded.
+ */
+void smc_destructor (void);
+
+/*
+ * The kernel calls this function when someone wants to use the device,
+ * typically 'ifconfig ethX up'.
+ */
+static int smc_open (void);
+
+
+/*
+ * This is called by the kernel in response to 'ifconfig ethX down'. It
+ * is responsible for cleaning up everything that the open routine
+ * does, and maybe putting the card into a powerdown state.
+ */
+static int smc_close (void);
+
+/*
+ * This is a separate procedure to handle the receipt of a packet, to
+ * leave the interrupt code looking slightly cleaner
+ */
+static int smc_rcv (void);
+
+
+
+/* ------------------------------------------------------------
+ * Internal routines
+ * ------------------------------------------------------------
+ */
+
+static char smc_mac_addr[] = { 0xc0, 0x00, 0x00, 0x1b, 0x62, 0x9c };
+
+/*
+ * This function must be called before smc_open() if you want to override
+ * the default mac address.
+ */
+
+void smc_set_mac_addr (const char *addr)
+{
+ int i;
+
+ for (i = 0; i < sizeof (smc_mac_addr); i++) {
+ smc_mac_addr[i] = addr[i];
+ }
+}
+
+/*
+ * smc_get_macaddr is no longer used. If you want to override the default
+ * mac address, call smc_get_mac_addr as a part of the board initialisation.
+ */
+
+#if 0
+void smc_get_macaddr (byte * addr)
+{
+ /* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */
+ unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010);
+ int i;
+
+
+ for (i = 0; i < 6; i++) {
+ addr[0] = *(dnp1110_mac + 0);
+ addr[1] = *(dnp1110_mac + 1);
+ addr[2] = *(dnp1110_mac + 2);
+ addr[3] = *(dnp1110_mac + 3);
+ addr[4] = *(dnp1110_mac + 4);
+ addr[5] = *(dnp1110_mac + 5);
+ }
+}
+#endif /* 0 */
+
+/***********************************************
+ * Show available memory *
+ ***********************************************/
+void dump_memory_info (void)
+{
+ word mem_info;
+ word old_bank;
+
+ old_bank = SMC_inw (LAN91C96_BANK_SELECT) & 0xF;
+
+ SMC_SELECT_BANK (0);
+ mem_info = SMC_inw (LAN91C96_MIR);
+ PRINTK2 ("Memory: %4d available\n", (mem_info >> 8) * 2048);
+
+ SMC_SELECT_BANK (old_bank);
+}
+
+/*
+ * A rather simple routine to print out a packet for debugging purposes.
+ */
+#if SMC_DEBUG > 2
+static void print_packet (byte *, int);
+#endif
+
+/* #define tx_done(dev) 1 */
+
+
+
+/* this does a soft reset on the device */
+static void smc_reset (void);
+
+/* Enable Interrupts, Receive, and Transmit */
+static void smc_enable (void);
+
+/* this puts the device in an inactive state */
+static void smc_shutdown (void);
+
+
+static int poll4int (byte mask, int timeout)
+{
+ int tmo = get_timer (0) + timeout * CFG_HZ;
+ int is_timeout = 0;
+ word old_bank = SMC_inw (LAN91C96_BANK_SELECT);
+
+ PRINTK2 ("Polling...\n");
+ SMC_SELECT_BANK (2);
+ while ((SMC_inw (LAN91C96_INT_STATS) & mask) == 0) {
+ if (get_timer (0) >= tmo) {
+ is_timeout = 1;
+ break;
+ }
+ }
+
+ /* restore old bank selection */
+ SMC_SELECT_BANK (old_bank);
+
+ if (is_timeout)
+ return 1;
+ else
+ return 0;
+}
+
+/*
+ * Function: smc_reset( void )
+ * Purpose:
+ * This sets the SMC91111 chip to its normal state, hopefully from whatever
+ * mess that any other DOS driver has put it in.
+ *
+ * Maybe I should reset more registers to defaults in here? SOFTRST should
+ * do that for me.
+ *
+ * Method:
+ * 1. send a SOFT RESET
+ * 2. wait for it to finish
+ * 3. enable autorelease mode
+ * 4. reset the memory management unit
+ * 5. clear all interrupts
+ *
+*/
+static void smc_reset (void)
+{
+ PRINTK2 ("%s:smc_reset\n", SMC_DEV_NAME);
+
+ /* This resets the registers mostly to defaults, but doesn't
+ affect EEPROM. That seems unnecessary */
+ SMC_SELECT_BANK (0);
+ SMC_outw (LAN91C96_RCR_SOFT_RST, LAN91C96_RCR);
+
+ udelay (10);
+
+ /* Disable transmit and receive functionality */
+ SMC_outw (0, LAN91C96_RCR);
+ SMC_outw (0, LAN91C96_TCR);
+
+ /* set the control register */
+ SMC_SELECT_BANK (1);
+ SMC_outw (SMC_inw (LAN91C96_CONTROL) | LAN91C96_CTR_BIT_8,
+ LAN91C96_CONTROL);
+
+ /* Disable all interrupts */
+ SMC_outb (0, LAN91C96_INT_MASK);
+}
+
+/*
+ * Function: smc_enable
+ * Purpose: let the chip talk to the outside work
+ * Method:
+ * 1. Initialize the Memory Configuration Register
+ * 2. Enable the transmitter
+ * 3. Enable the receiver
+*/
+static void smc_enable ()
+{
+ PRINTK2 ("%s:smc_enable\n", SMC_DEV_NAME);
+ SMC_SELECT_BANK (0);
+
+ /* Initialize the Memory Configuration Register. See page
+ 49 of the LAN91C96 data sheet for details. */
+ SMC_outw (LAN91C96_MCR_TRANSMIT_PAGES, LAN91C96_MCR);
+
+ /* Initialize the Transmit Control Register */
+ SMC_outw (LAN91C96_TCR_TXENA, LAN91C96_TCR);
+ /* Initialize the Receive Control Register
+ * FIXME:
+ * The promiscuous bit set because I could not receive ARP reply
+ * packets from the server when I send a ARP request. It only works
+ * when I set the promiscuous bit
+ */
+ SMC_outw (LAN91C96_RCR_RXEN | LAN91C96_RCR_PRMS, LAN91C96_RCR);
+}
+
+/*
+ * Function: smc_shutdown
+ * Purpose: closes down the SMC91xxx chip.
+ * Method:
+ * 1. zero the interrupt mask
+ * 2. clear the enable receive flag
+ * 3. clear the enable xmit flags
+ *
+ * TODO:
+ * (1) maybe utilize power down mode.
+ * Why not yet? Because while the chip will go into power down mode,
+ * the manual says that it will wake up in response to any I/O requests
+ * in the register space. Empirical results do not show this working.
+ */
+static void smc_shutdown ()
+{
+ PRINTK2 (CARDNAME ":smc_shutdown\n");
+
+ /* no more interrupts for me */
+ SMC_SELECT_BANK (2);
+ SMC_outb (0, LAN91C96_INT_MASK);
+
+ /* and tell the card to stay away from that nasty outside world */
+ SMC_SELECT_BANK (0);
+ SMC_outb (0, LAN91C96_RCR);
+ SMC_outb (0, LAN91C96_TCR);
+}
+
+
+/*
+ * Function: smc_hardware_send_packet(struct net_device * )
+ * Purpose:
+ * This sends the actual packet to the SMC9xxx chip.
+ *
+ * Algorithm:
+ * First, see if a saved_skb is available.
+ * ( this should NOT be called if there is no 'saved_skb'
+ * Now, find the packet number that the chip allocated
+ * Point the data pointers at it in memory
+ * Set the length word in the chip's memory
+ * Dump the packet to chip memory
+ * Check if a last byte is needed ( odd length packet )
+ * if so, set the control flag right
+ * Tell the card to send it
+ * Enable the transmit interrupt, so I know if it failed
+ * Free the kernel data if I actually sent it.
+ */
+static int smc_send_packet (volatile void *packet, int packet_length)
+{
+ byte packet_no;
+ unsigned long ioaddr;
+ byte *buf;
+ int length;
+ int numPages;
+ int try = 0;
+ int time_out;
+ byte status;
+
+
+ PRINTK3 ("%s:smc_hardware_send_packet\n", SMC_DEV_NAME);
+
+ length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
+
+ /* allocate memory
+ ** The MMU wants the number of pages to be the number of 256 bytes
+ ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
+ **
+ ** The 91C111 ignores the size bits, but the code is left intact
+ ** for backwards and future compatibility.
+ **
+ ** Pkt size for allocating is data length +6 (for additional status
+ ** words, length and ctl!)
+ **
+ ** If odd size then last byte is included in this header.
+ */
+ numPages = ((length & 0xfffe) + 6);
+ numPages >>= 8; /* Divide by 256 */
+
+ if (numPages > 7) {
+ printf ("%s: Far too big packet error. \n", SMC_DEV_NAME);
+ return 0;
+ }
+
+ /* now, try to allocate the memory */
+
+ SMC_SELECT_BANK (2);
+ SMC_outw (LAN91C96_MMUCR_ALLOC_TX | numPages, LAN91C96_MMU);
+
+ again:
+ try++;
+ time_out = MEMORY_WAIT_TIME;
+ do {
+ status = SMC_inb (LAN91C96_INT_STATS);
+ if (status & LAN91C96_IST_ALLOC_INT) {
+
+ SMC_outb (LAN91C96_IST_ALLOC_INT, LAN91C96_INT_STATS);
+ break;
+ }
+ } while (--time_out);
+
+ if (!time_out) {
+ PRINTK2 ("%s: memory allocation, try %d failed ...\n",
+ SMC_DEV_NAME, try);
+ if (try < SMC_ALLOC_MAX_TRY)
+ goto again;
+ else
+ return 0;
+ }
+
+ PRINTK2 ("%s: memory allocation, try %d succeeded ...\n",
+ SMC_DEV_NAME, try);
+
+ /* I can send the packet now.. */
+
+ ioaddr = SMC_BASE_ADDRESS;
+
+ buf = (byte *) packet;
+
+ /* If I get here, I _know_ there is a packet slot waiting for me */
+ packet_no = SMC_inb (LAN91C96_ARR);
+ if (packet_no & LAN91C96_ARR_FAILED) {
+ /* or isn't there? BAD CHIP! */
+ printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME);
+ return 0;
+ }
+
+ /* we have a packet address, so tell the card to use it */
+ SMC_outb (packet_no, LAN91C96_PNR);
+
+ /* point to the beginning of the packet */
+ SMC_outw (LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER);
+
+ PRINTK3 ("%s: Trying to xmit packet of length %x\n",
+ SMC_DEV_NAME, length);
+
+#if SMC_DEBUG > 2
+ printf ("Transmitting Packet\n");
+ print_packet (buf, length);
+#endif
+
+ /* send the packet length ( +6 for status, length and ctl byte )
+ and the status word ( set to zeros ) */
+#ifdef USE_32_BIT
+ SMC_outl ((length + 6) << 16, LAN91C96_DATA_HIGH);
+#else
+ SMC_outw (0, LAN91C96_DATA_HIGH);
+ /* send the packet length ( +6 for status words, length, and ctl */
+ SMC_outw ((length + 6), LAN91C96_DATA_HIGH);
+#endif /* USE_32_BIT */
+
+ /* send the actual data
+ * I _think_ it's faster to send the longs first, and then
+ * mop up by sending the last word. It depends heavily
+ * on alignment, at least on the 486. Maybe it would be
+ * a good idea to check which is optimal? But that could take
+ * almost as much time as is saved?
+ */
+#ifdef USE_32_BIT
+ SMC_outsl (LAN91C96_DATA_HIGH, buf, length >> 2);
+ if (length & 0x2)
+ SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))),
+ LAN91C96_DATA_HIGH);
+#else
+ SMC_outsw (LAN91C96_DATA_HIGH, buf, (length) >> 1);
+#endif /* USE_32_BIT */
+
+ /* Send the last byte, if there is one. */
+ if ((length & 1) == 0) {
+ SMC_outw (0, LAN91C96_DATA_HIGH);
+ } else {
+ SMC_outw (buf[length - 1] | 0x2000, LAN91C96_DATA_HIGH);
+ }
+
+ /* and let the chipset deal with it */
+ SMC_outw (LAN91C96_MMUCR_ENQUEUE, LAN91C96_MMU);
+
+ /* poll for TX INT */
+ if (poll4int (LAN91C96_MSK_TX_INT, SMC_TX_TIMEOUT)) {
+ /* sending failed */
+ PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME);
+
+ /* release packet */
+ SMC_outw (LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU);
+
+ /* wait for MMU getting ready (low) */
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) {
+ udelay (10);
+ }
+
+ PRINTK2 ("MMU ready\n");
+
+
+ return 0;
+ } else {
+ /* ack. int */
+ SMC_outw (LAN91C96_IST_TX_INT, LAN91C96_INT_STATS);
+
+ PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME, length);
+
+ /* release packet */
+ SMC_outw (LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU);
+
+ /* wait for MMU getting ready (low) */
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) {
+ udelay (10);
+ }
+
+ PRINTK2 ("MMU ready\n");
+ }
+
+ return length;
+}
+
+/*-------------------------------------------------------------------------
+ * smc_destructor( struct net_device * dev )
+ * Input parameters:
+ * dev, pointer to the device structure
+ *
+ * Output:
+ * None.
+ *--------------------------------------------------------------------------
+ */
+void smc_destructor ()
+{
+ PRINTK2 (CARDNAME ":smc_destructor\n");
+}
+
+
+/*
+ * Open and Initialize the board
+ *
+ * Set up everything, reset the card, etc ..
+ *
+ */
+static int smc_open ()
+{
+ int i; /* used to set hw ethernet address */
+
+ PRINTK2 ("%s:smc_open\n", SMC_DEV_NAME);
+
+ /* reset the hardware */
+
+ smc_reset ();
+ smc_enable ();
+
+ SMC_SELECT_BANK (1);
+
+ for (i = 0; i < 6; i += 2) {
+ word address;
+
+ address = smc_mac_addr[i + 1] << 8;
+ address |= smc_mac_addr[i];
+ SMC_outw (address, LAN91C96_IA0 + i);
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------
+ *
+ * smc_rcv - receive a packet from the card
+ *
+ * There is ( at least ) a packet waiting to be read from
+ * chip-memory.
+ *
+ * o Read the status
+ * o If an error, record it
+ * o otherwise, read in the packet
+ *-------------------------------------------------------------
+ */
+static int smc_rcv ()
+{
+ int packet_number;
+ word status;
+ word packet_length;
+ int is_error = 0;
+
+#ifdef USE_32_BIT
+ dword stat_len;
+#endif
+
+
+ SMC_SELECT_BANK (2);
+ packet_number = SMC_inw (LAN91C96_FIFO);
+
+ if (packet_number & LAN91C96_FIFO_RXEMPTY) {
+ return 0;
+ }
+
+ PRINTK3 ("%s:smc_rcv\n", SMC_DEV_NAME);
+ /* start reading from the start of the packet */
+ SMC_outw (LAN91C96_PTR_READ | LAN91C96_PTR_RCV |
+ LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER);
+
+ /* First two words are status and packet_length */
+#ifdef USE_32_BIT
+ stat_len = SMC_inl (LAN91C96_DATA_HIGH);
+ status = stat_len & 0xffff;
+ packet_length = stat_len >> 16;
+#else
+ status = SMC_inw (LAN91C96_DATA_HIGH);
+ packet_length = SMC_inw (LAN91C96_DATA_HIGH);
+#endif
+
+ packet_length &= 0x07ff; /* mask off top bits */
+
+ PRINTK2 ("RCV: STATUS %4x LENGTH %4x\n", status, packet_length);
+
+ if (!(status & FRAME_FILTER)) {
+ /* Adjust for having already read the first two words */
+ packet_length -= 4; /*4; */
+
+
+
+ /* set odd length for bug in LAN91C111, */
+ /* which never sets RS_ODDFRAME */
+ /* TODO ? */
+
+
+#ifdef USE_32_BIT
+ PRINTK3 (" Reading %d dwords (and %d bytes) \n",
+ packet_length >> 2, packet_length & 3);
+ /* QUESTION: Like in the TX routine, do I want
+ to send the DWORDs or the bytes first, or some
+ mixture. A mixture might improve already slow PIO
+ performance */
+ SMC_insl (LAN91C96_DATA_HIGH, NetRxPackets[0], packet_length >> 2);
+ /* read the left over bytes */
+ if (packet_length & 3) {
+ int i;
+
+ byte *tail = (byte *) (NetRxPackets[0] + (packet_length & ~3));
+ dword leftover = SMC_inl (LAN91C96_DATA_HIGH);
+
+ for (i = 0; i < (packet_length & 3); i++)
+ *tail++ = (byte) (leftover >> (8 * i)) & 0xff;
+ }
+#else
+ PRINTK3 (" Reading %d words and %d byte(s) \n",
+ (packet_length >> 1), packet_length & 1);
+ SMC_insw (LAN91C96_DATA_HIGH, NetRxPackets[0], packet_length >> 1);
+
+#endif /* USE_32_BIT */
+
+#if SMC_DEBUG > 2
+ printf ("Receiving Packet\n");
+ print_packet (NetRxPackets[0], packet_length);
+#endif
+ } else {
+ /* error ... */
+ /* TODO ? */
+ is_error = 1;
+ }
+
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
+ udelay (1); /* Wait until not busy */
+
+ /* error or good, tell the card to get rid of this packet */
+ SMC_outw (LAN91C96_MMUCR_RELEASE_RX, LAN91C96_MMU);
+
+ while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
+ udelay (1); /* Wait until not busy */
+
+ if (!is_error) {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[0], packet_length);
+ return packet_length;
+ } else {
+ return 0;
+ }
+
+}
+
+/*----------------------------------------------------
+ * smc_close
+ *
+ * this makes the board clean up everything that it can
+ * and not talk to the outside world. Caused by
+ * an 'ifconfig ethX down'
+ *
+ -----------------------------------------------------*/
+static int smc_close ()
+{
+ PRINTK2 ("%s:smc_close\n", SMC_DEV_NAME);
+
+ /* clear everything */
+ smc_shutdown ();
+
+ return 0;
+}
+
+#if SMC_DEBUG > 2
+static void print_packet (byte * buf, int length)
+{
+#if 0
+ int i;
+ int remainder;
+ int lines;
+
+ printf ("Packet of length %d \n", length);
+
+ lines = length / 16;
+ remainder = length % 16;
+
+ for (i = 0; i < lines; i++) {
+ int cur;
+
+ for (cur = 0; cur < 8; cur++) {
+ byte a, b;
+
+ a = *(buf++);
+ b = *(buf++);
+ printf ("%02x%02x ", a, b);
+ }
+ printf ("\n");
+ }
+ for (i = 0; i < remainder / 2; i++) {
+ byte a, b;
+
+ a = *(buf++);
+ b = *(buf++);
+ printf ("%02x%02x ", a, b);
+ }
+ printf ("\n");
+#endif /* 0 */
+}
+#endif /* SMC_DEBUG > 2 */
+
+int eth_init (bd_t * bd)
+{
+ smc_open ();
+ return 0;
+}
+
+void eth_halt ()
+{
+ smc_close ();
+}
+
+int eth_rx ()
+{
+ return smc_rcv ();
+}
+
+int eth_send (volatile void *packet, int length)
+{
+ return smc_send_packet (packet, length);
+}
+
+int eth_hw_init ()
+{
+ return smc_hw_init ();
+}
+
+/*-------------------------------------------------------------------------
+ * smc_hw_init()
+ *
+ * Function:
+ * Reset and enable the device, check if the I/O space location
+ * is correct
+ *
+ * Input parameters:
+ * None
+ *
+ * Output:
+ * 0 --> success
+ * 1 --> error
+ *--------------------------------------------------------------------------
+ */
+static int smc_hw_init ()
+{
+ unsigned short status_test;
+
+ /* The attribute register of the LAN91C96 is located at address
+ 0x0e000000 on the lubbock platform */
+ volatile unsigned *attaddr = (unsigned *) (0x0e000000);
+
+ /* first reset, then enable the device. Sequence is critical */
+ attaddr[LAN91C96_ECOR] |= LAN91C96_ECOR_SRESET;
+ udelay (100);
+ attaddr[LAN91C96_ECOR] &= ~LAN91C96_ECOR_SRESET;
+ attaddr[LAN91C96_ECOR] |= LAN91C96_ECOR_ENABLE;
+
+ /* force 16-bit mode */
+ attaddr[LAN91C96_ECSR] &= ~LAN91C96_ECSR_IOIS8;
+ udelay (100);
+
+ /* check if the I/O address is correct, the upper byte of the
+ bank select register should read 0x33 */
+
+ status_test = SMC_inw (LAN91C96_BANK_SELECT);
+ if ((status_test & 0xFF00) != 0x3300) {
+ printf ("Failed to initialize ethernetchip\n");
+ return 1;
+ }
+ return 0;
+}
+
+#endif /* COMMANDS & CFG_NET */
+
+#endif /* CONFIG_DRIVER_LAN91C96 */
diff --git a/drivers/lan91c96.h b/drivers/lan91c96.h
new file mode 100644
index 0000000..3ac58bc
--- /dev/null
+++ b/drivers/lan91c96.h
@@ -0,0 +1,635 @@
+/*------------------------------------------------------------------------
+ * lan91c96.h
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Rolf Offermanns <rof@sysgo.de>
+ * Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ * Developed by Simple Network Magic Corporation (SNMC)
+ * Copyright (C) 1996 by Erik Stahlman (ES)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This file contains register information and access macros for
+ * the LAN91C96 single chip ethernet controller. It is a modified
+ * version of the smc9111.h file.
+ *
+ * Information contained in this file was obtained from the LAN91C96
+ * manual from SMC. To get a copy, if you really want one, you can find
+ * information under www.smsc.com.
+ *
+ * Authors
+ * Erik Stahlman ( erik@vt.edu )
+ * Daris A Nevil ( dnevil@snmc.com )
+ *
+ * History
+ * 04/30/03 Mathijs Haarman Modified smc91111.h (u-boot version)
+ * for lan91c96
+ *-------------------------------------------------------------------------
+ */
+#ifndef _LAN91C96_H_
+#define _LAN91C96_H_
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <config.h>
+
+/*
+ * This function may be called by the board specific initialisation code
+ * in order to override the default mac address.
+ */
+
+void smc_set_mac_addr(const char *addr);
+int eth_hw_init(void);
+
+
+/* I want some simple types */
+
+typedef unsigned char byte;
+typedef unsigned short word;
+typedef unsigned long int dword;
+
+/*
+ * DEBUGGING LEVELS
+ *
+ * 0 for normal operation
+ * 1 for slightly more details
+ * >2 for various levels of increasingly useless information
+ * 2 for interrupt tracking, status flags
+ * 3 for packet info
+ * 4 for complete packet dumps
+ */
+/*#define SMC_DEBUG 0 */
+
+/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */
+
+#define SMC_IO_EXTENT 16
+
+#ifdef CONFIG_PXA250
+
+#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+( r * 4 ))))
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+( r * 4 ))))
+#define SMC_inb(p) ({ \
+ unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p * 4)); \
+ unsigned int __v = *(volatile unsigned short *)((__p) & ~1); \
+ if (__p & 1) __v >>= 8; \
+ else __v &= 0xff; \
+ __v; })
+
+#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r * 4))) = d)
+#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r * 4))) = d)
+#define SMC_outb(d,r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((r)&~1); \
+ __w &= ((r)&1) ? 0x00FF : 0xFF00; \
+ __w |= ((r)&1) ? __d<<8 : __d; \
+ SMC_outw(__w,(r)&~1); \
+ })
+
+#define SMC_outsl(r,b,l) ({ int __i; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outl( *(__b2 + __i), r ); \
+ } \
+ })
+
+#define SMC_outsw(r,b,l) ({ int __i; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outw( *(__b2 + __i), r ); \
+ } \
+ })
+
+#define SMC_insl(r,b,l) ({ int __i ; \
+ dword *__b2; \
+ __b2 = (dword *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inl(r); \
+ SMC_inl(0); \
+ }; \
+ })
+
+#define SMC_insw(r,b,l) ({ int __i ; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inw(r); \
+ SMC_inw(0); \
+ }; \
+ })
+
+#define SMC_insb(r,b,l) ({ int __i ; \
+ byte *__b2; \
+ __b2 = (byte *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inb(r); \
+ SMC_inb(0); \
+ }; \
+ })
+
+#else /* if not CONFIG_PXA250 */
+
+/*
+ * We have only 16 Bit PCMCIA access on Socket 0
+ */
+
+#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inb(r) (((r)&1) ? SMC_inw((r)&~1)>>8 : SMC_inw(r)&0xFF)
+
+#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d)
+#define SMC_outb(d,r) ({ word __d = (byte)(d); \
+ word __w = SMC_inw((r)&~1); \
+ __w &= ((r)&1) ? 0x00FF : 0xFF00; \
+ __w |= ((r)&1) ? __d<<8 : __d; \
+ SMC_outw(__w,(r)&~1); \
+ })
+#if 0
+#define SMC_outsw(r,b,l) outsw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_outsw(r,b,l) ({ int __i; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ SMC_outw( *(__b2 + __i), r); \
+ } \
+ })
+#endif
+
+#if 0
+#define SMC_insw(r,b,l) insw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_insw(r,b,l) ({ int __i ; \
+ word *__b2; \
+ __b2 = (word *) b; \
+ for (__i = 0; __i < l; __i++) { \
+ *(__b2 + __i) = SMC_inw(r); \
+ SMC_inw(0); \
+ }; \
+ })
+#endif
+
+#endif
+
+/*
+ ****************************************************************************
+ * Bank Select Field
+ ****************************************************************************
+ */
+#define LAN91C96_BANK_SELECT 14 // Bank Select Register
+#define LAN91C96_BANKSELECT (0x3UC << 0)
+#define BANK0 0x00
+#define BANK1 0x01
+#define BANK2 0x02
+#define BANK3 0x03
+#define BANK4 0x04
+
+/*
+ ****************************************************************************
+ * EEPROM Addresses.
+ ****************************************************************************
+ */
+#define EEPROM_MAC_OFFSET_1 0x6020
+#define EEPROM_MAC_OFFSET_2 0x6021
+#define EEPROM_MAC_OFFSET_3 0x6022
+
+/*
+ ****************************************************************************
+ * Bank 0 Register Map in I/O Space
+ ****************************************************************************
+ */
+#define LAN91C96_TCR 0 // Transmit Control Register
+#define LAN91C96_EPH_STATUS 2 // EPH Status Register
+#define LAN91C96_RCR 4 // Receive Control Register
+#define LAN91C96_COUNTER 6 // Counter Register
+#define LAN91C96_MIR 8 // Memory Information Register
+#define LAN91C96_MCR 10 // Memory Configuration Register
+
+/*
+ ****************************************************************************
+ * Transmit Control Register - Bank 0 - Offset 0
+ ****************************************************************************
+ */
+#define LAN91C96_TCR_TXENA (0x1U << 0)
+#define LAN91C96_TCR_LOOP (0x1U << 1)
+#define LAN91C96_TCR_FORCOL (0x1U << 2)
+#define LAN91C96_TCR_TXP_EN (0x1U << 3)
+#define LAN91C96_TCR_PAD_EN (0x1U << 7)
+#define LAN91C96_TCR_NOCRC (0x1U << 8)
+#define LAN91C96_TCR_MON_CSN (0x1U << 10)
+#define LAN91C96_TCR_FDUPLX (0x1U << 11)
+#define LAN91C96_TCR_STP_SQET (0x1U << 12)
+#define LAN91C96_TCR_EPH_LOOP (0x1U << 13)
+#define LAN91C96_TCR_ETEN_TYPE (0x1U << 14)
+#define LAN91C96_TCR_FDSE (0x1U << 15)
+
+/*
+ ****************************************************************************
+ * EPH Status Register - Bank 0 - Offset 2
+ ****************************************************************************
+ */
+#define LAN91C96_EPHSR_TX_SUC (0x1U << 0)
+#define LAN91C96_EPHSR_SNGL_COL (0x1U << 1)
+#define LAN91C96_EPHSR_MUL_COL (0x1U << 2)
+#define LAN91C96_EPHSR_LTX_MULT (0x1U << 3)
+#define LAN91C96_EPHSR_16COL (0x1U << 4)
+#define LAN91C96_EPHSR_SQET (0x1U << 5)
+#define LAN91C96_EPHSR_LTX_BRD (0x1U << 6)
+#define LAN91C96_EPHSR_TX_DEFR (0x1U << 7)
+#define LAN91C96_EPHSR_WAKEUP (0x1U << 8)
+#define LAN91C96_EPHSR_LATCOL (0x1U << 9)
+#define LAN91C96_EPHSR_LOST_CARR (0x1U << 10)
+#define LAN91C96_EPHSR_EXC_DEF (0x1U << 11)
+#define LAN91C96_EPHSR_CTR_ROL (0x1U << 12)
+
+#define LAN91C96_EPHSR_LINK_OK (0x1U << 14)
+#define LAN91C96_EPHSR_TX_UNRN (0x1U << 15)
+
+#define LAN91C96_EPHSR_ERRORS (LAN91C96_EPHSR_SNGL_COL | \
+ LAN91C96_EPHSR_MUL_COL | \
+ LAN91C96_EPHSR_16COL | \
+ LAN91C96_EPHSR_SQET | \
+ LAN91C96_EPHSR_TX_DEFR | \
+ LAN91C96_EPHSR_LATCOL | \
+ LAN91C96_EPHSR_LOST_CARR | \
+ LAN91C96_EPHSR_EXC_DEF | \
+ LAN91C96_EPHSR_LINK_OK | \
+ LAN91C96_EPHSR_TX_UNRN)
+
+/*
+ ****************************************************************************
+ * Receive Control Register - Bank 0 - Offset 4
+ ****************************************************************************
+ */
+#define LAN91C96_RCR_RX_ABORT (0x1U << 0)
+#define LAN91C96_RCR_PRMS (0x1U << 1)
+#define LAN91C96_RCR_ALMUL (0x1U << 2)
+#define LAN91C96_RCR_RXEN (0x1U << 8)
+#define LAN91C96_RCR_STRIP_CRC (0x1U << 9)
+#define LAN91C96_RCR_FILT_CAR (0x1U << 14)
+#define LAN91C96_RCR_SOFT_RST (0x1U << 15)
+
+/*
+ ****************************************************************************
+ * Counter Register - Bank 0 - Offset 6
+ ****************************************************************************
+ */
+#define LAN91C96_ECR_SNGL_COL (0xFU << 0)
+#define LAN91C96_ECR_MULT_COL (0xFU << 5)
+#define LAN91C96_ECR_DEF_TX (0xFU << 8)
+#define LAN91C96_ECR_EXC_DEF_TX (0xFU << 12)
+
+/*
+ ****************************************************************************
+ * Memory Information Register - Bank 0 - OFfset 8
+ ****************************************************************************
+ */
+#define LAN91C96_MIR_SIZE (0x18 << 0) // 6144 bytes
+
+/*
+ ****************************************************************************
+ * Memory Configuration Register - Bank 0 - Offset 10
+ ****************************************************************************
+ */
+#define LAN91C96_MCR_MEM_RES (0xFFU << 0)
+#define LAN91C96_MCR_MEM_MULT (0x3U << 9)
+#define LAN91C96_MCR_HIGH_ID (0x3U << 12)
+
+#define LAN91C96_MCR_TRANSMIT_PAGES 0x6
+
+/*
+ ****************************************************************************
+ * Bank 1 Register Map in I/O Space
+ ****************************************************************************
+ */
+#define LAN91C96_CONFIG 0 // Configuration Register
+#define LAN91C96_BASE 2 // Base Address Register
+#define LAN91C96_IA0 4 // Individual Address Register - 0
+#define LAN91C96_IA1 5 // Individual Address Register - 1
+#define LAN91C96_IA2 6 // Individual Address Register - 2
+#define LAN91C96_IA3 7 // Individual Address Register - 3
+#define LAN91C96_IA4 8 // Individual Address Register - 4
+#define LAN91C96_IA5 9 // Individual Address Register - 5
+#define LAN91C96_GEN_PURPOSE 10 // General Address Registers
+#define LAN91C96_CONTROL 12 // Control Register
+
+/*
+ ****************************************************************************
+ * Configuration Register - Bank 1 - Offset 0
+ ****************************************************************************
+ */
+#define LAN91C96_CR_INT_SEL0 (0x1U << 1)
+#define LAN91C96_CR_INT_SEL1 (0x1U << 2)
+#define LAN91C96_CR_RES (0x3U << 3)
+#define LAN91C96_CR_DIS_LINK (0x1U << 6)
+#define LAN91C96_CR_16BIT (0x1U << 7)
+#define LAN91C96_CR_AUI_SELECT (0x1U << 8)
+#define LAN91C96_CR_SET_SQLCH (0x1U << 9)
+#define LAN91C96_CR_FULL_STEP (0x1U << 10)
+#define LAN91C96_CR_NO_WAIT (0x1U << 12)
+
+/*
+ ****************************************************************************
+ * Base Address Register - Bank 1 - Offset 2
+ ****************************************************************************
+ */
+#define LAN91C96_BAR_RA_BITS (0x27U << 0)
+#define LAN91C96_BAR_ROM_SIZE (0x1U << 6)
+#define LAN91C96_BAR_A_BITS (0xFFU << 8)
+
+/*
+ ****************************************************************************
+ * Control Register - Bank 1 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_CTR_STORE (0x1U << 0)
+#define LAN91C96_CTR_RELOAD (0x1U << 1)
+#define LAN91C96_CTR_EEPROM (0x1U << 2)
+#define LAN91C96_CTR_TE_ENABLE (0x1U << 5)
+#define LAN91C96_CTR_CR_ENABLE (0x1U << 6)
+#define LAN91C96_CTR_LE_ENABLE (0x1U << 7)
+#define LAN91C96_CTR_BIT_8 (0x1U << 8)
+#define LAN91C96_CTR_AUTO_RELEASE (0x1U << 11)
+#define LAN91C96_CTR_WAKEUP_EN (0x1U << 12)
+#define LAN91C96_CTR_PWRDN (0x1U << 13)
+#define LAN91C96_CTR_RCV_BAD (0x1U << 14)
+
+/*
+ ****************************************************************************
+ * Bank 2 Register Map in I/O Space
+ ****************************************************************************
+ */
+#define LAN91C96_MMU 0 // MMU Command Register
+#define LAN91C96_AUTO_TX_START 1 // Auto Tx Start Register
+#define LAN91C96_PNR 2 // Packet Number Register
+#define LAN91C96_ARR 3 // Allocation Result Register
+#define LAN91C96_FIFO 4 // FIFO Ports Register
+#define LAN91C96_POINTER 6 // Pointer Register
+#define LAN91C96_DATA_HIGH 8 // Data High Register
+#define LAN91C96_DATA_LOW 10 // Data Low Register
+#define LAN91C96_INT_STATS 12 // Interrupt Status Register - RO
+#define LAN91C96_INT_ACK 12 // Interrupt Acknowledge Register -WO
+#define LAN91C96_INT_MASK 13 // Interrupt Mask Register
+
+/*
+ ****************************************************************************
+ * MMU Command Register - Bank 2 - Offset 0
+ ****************************************************************************
+ */
+#define LAN91C96_MMUCR_NO_BUSY (0x1U << 0)
+#define LAN91C96_MMUCR_N1 (0x1U << 1)
+#define LAN91C96_MMUCR_N2 (0x1U << 2)
+#define LAN91C96_MMUCR_COMMAND (0xFU << 4)
+#define LAN91C96_MMUCR_ALLOC_TX (0x2U << 4) // WXYZ = 0010
+#define LAN91C96_MMUCR_RESET_MMU (0x4U << 4) // WXYZ = 0100
+#define LAN91C96_MMUCR_REMOVE_RX (0x6U << 4) // WXYZ = 0110
+#define LAN91C96_MMUCR_REMOVE_TX (0x7U << 4) // WXYZ = 0111
+#define LAN91C96_MMUCR_RELEASE_RX (0x8U << 4) // WXYZ = 1000
+#define LAN91C96_MMUCR_RELEASE_TX (0xAU << 4) // WXYZ = 1010
+#define LAN91C96_MMUCR_ENQUEUE (0xCU << 4) // WXYZ = 1100
+#define LAN91C96_MMUCR_RESET_TX (0xEU << 4) // WXYZ = 1110
+
+/*
+ ****************************************************************************
+ * Auto Tx Start Register - Bank 2 - Offset 1
+ ****************************************************************************
+ */
+#define LAN91C96_AUTOTX (0xFFU << 0)
+
+/*
+ ****************************************************************************
+ * Packet Number Register - Bank 2 - Offset 2
+ ****************************************************************************
+ */
+#define LAN91C96_PNR_TX (0x1FU << 0)
+
+/*
+ ****************************************************************************
+ * Allocation Result Register - Bank 2 - Offset 3
+ ****************************************************************************
+ */
+#define LAN91C96_ARR_ALLOC_PN (0x7FU << 0)
+#define LAN91C96_ARR_FAILED (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * FIFO Ports Register - Bank 2 - Offset 4
+ ****************************************************************************
+ */
+#define LAN91C96_FIFO_TX_DONE_PN (0x1FU << 0)
+#define LAN91C96_FIFO_TEMPTY (0x1U << 7)
+#define LAN91C96_FIFO_RX_DONE_PN (0x1FU << 8)
+#define LAN91C96_FIFO_RXEMPTY (0x1U << 15)
+
+/*
+ ****************************************************************************
+ * Pointer Register - Bank 2 - Offset 6
+ ****************************************************************************
+ */
+#define LAN91C96_PTR_LOW (0xFFU << 0)
+#define LAN91C96_PTR_HIGH (0x7U << 8)
+#define LAN91C96_PTR_AUTO_TX (0x1U << 11)
+#define LAN91C96_PTR_ETEN (0x1U << 12)
+#define LAN91C96_PTR_READ (0x1U << 13)
+#define LAN91C96_PTR_AUTO_INCR (0x1U << 14)
+#define LAN91C96_PTR_RCV (0x1U << 15)
+
+#define LAN91C96_PTR_RX_FRAME (LAN91C96_PTR_RCV | \
+ LAN91C96_PTR_AUTO_INCR | \
+ LAN91C96_PTR_READ)
+
+/*
+ ****************************************************************************
+ * Data Register - Bank 2 - Offset 8
+ ****************************************************************************
+ */
+#define LAN91C96_CONTROL_CRC (0x1U << 4) // CRC bit
+#define LAN91C96_CONTROL_ODD (0x1U << 5) // ODD bit
+
+/*
+ ****************************************************************************
+ * Interrupt Status Register - Bank 2 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_IST_RCV_INT (0x1U << 0)
+#define LAN91C96_IST_TX_INT (0x1U << 1)
+#define LAN91C96_IST_TX_EMPTY_INT (0x1U << 2)
+#define LAN91C96_IST_ALLOC_INT (0x1U << 3)
+#define LAN91C96_IST_RX_OVRN_INT (0x1U << 4)
+#define LAN91C96_IST_EPH_INT (0x1U << 5)
+#define LAN91C96_IST_ERCV_INT (0x1U << 6)
+#define LAN91C96_IST_RX_IDLE_INT (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * Interrupt Acknowledge Register - Bank 2 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_ACK_TX_INT (0x1U << 1)
+#define LAN91C96_ACK_TX_EMPTY_INT (0x1U << 2)
+#define LAN91C96_ACK_RX_OVRN_INT (0x1U << 4)
+#define LAN91C96_ACK_ERCV_INT (0x1U << 6)
+
+/*
+ ****************************************************************************
+ * Interrupt Mask Register - Bank 2 - Offset 13
+ ****************************************************************************
+ */
+#define LAN91C96_MSK_RCV_INT (0x1U << 0)
+#define LAN91C96_MSK_TX_INT (0x1U << 1)
+#define LAN91C96_MSK_TX_EMPTY_INT (0x1U << 2)
+#define LAN91C96_MSK_ALLOC_INT (0x1U << 3)
+#define LAN91C96_MSK_RX_OVRN_INT (0x1U << 4)
+#define LAN91C96_MSK_EPH_INT (0x1U << 5)
+#define LAN91C96_MSK_ERCV_INT (0x1U << 6)
+#define LAN91C96_MSK_TX_IDLE_INT (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * Bank 3 Register Map in I/O Space
+ **************************************************************************
+ */
+#define LAN91C96_MGMT_MDO (0x1U << 0)
+#define LAN91C96_MGMT_MDI (0x1U << 1)
+#define LAN91C96_MGMT_MCLK (0x1U << 2)
+#define LAN91C96_MGMT_MDOE (0x1U << 3)
+#define LAN91C96_MGMT_LOW_ID (0x3U << 4)
+#define LAN91C96_MGMT_IOS0 (0x1U << 8)
+#define LAN91C96_MGMT_IOS1 (0x1U << 9)
+#define LAN91C96_MGMT_IOS2 (0x1U << 10)
+#define LAN91C96_MGMT_nXNDEC (0x1U << 11)
+#define LAN91C96_MGMT_HIGH_ID (0x3U << 12)
+
+/*
+ ****************************************************************************
+ * Revision Register - Bank 3 - Offset 10
+ ****************************************************************************
+ */
+#define LAN91C96_REV_REVID (0xFU << 0)
+#define LAN91C96_REV_CHIPID (0xFU << 4)
+
+/*
+ ****************************************************************************
+ * Early RCV Register - Bank 3 - Offset 12
+ ****************************************************************************
+ */
+#define LAN91C96_ERCV_THRESHOLD (0x1FU << 0)
+#define LAN91C96_ERCV_RCV_DISCRD (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * PCMCIA Configuration Registers
+ ****************************************************************************
+ */
+#define LAN91C96_ECOR 0x8000 // Ethernet Configuration Register
+#define LAN91C96_ECSR 0x8002 // Ethernet Configuration and Status
+
+/*
+ ****************************************************************************
+ * PCMCIA Ethernet Configuration Option Register (ECOR)
+ ****************************************************************************
+ */
+#define LAN91C96_ECOR_ENABLE (0x1U << 0)
+#define LAN91C96_ECOR_WR_ATTRIB (0x1U << 2)
+#define LAN91C96_ECOR_LEVEL_REQ (0x1U << 6)
+#define LAN91C96_ECOR_SRESET (0x1U << 7)
+
+/*
+ ****************************************************************************
+ * PCMCIA Ethernet Configuration and Status Register (ECSR)
+ ****************************************************************************
+ */
+#define LAN91C96_ECSR_INTR (0x1U << 1)
+#define LAN91C96_ECSR_PWRDWN (0x1U << 2)
+#define LAN91C96_ECSR_IOIS8 (0x1U << 5)
+
+/*
+ ****************************************************************************
+ * Receive Frame Status Word - See page 38 of the LAN91C96 specification.
+ ****************************************************************************
+ */
+#define LAN91C96_TOO_SHORT (0x1U << 10)
+#define LAN91C96_TOO_LONG (0x1U << 11)
+#define LAN91C96_ODD_FRM (0x1U << 12)
+#define LAN91C96_BAD_CRC (0x1U << 13)
+#define LAN91C96_BROD_CAST (0x1U << 14)
+#define LAN91C96_ALGN_ERR (0x1U << 15)
+
+#define FRAME_FILTER (LAN91C96_TOO_SHORT | LAN91C96_TOO_LONG | LAN91C96_BAD_CRC | LAN91C96_ALGN_ERR)
+
+/*
+ ****************************************************************************
+ * Default MAC Address
+ ****************************************************************************
+ */
+#define MAC_DEF_HI 0x0800
+#define MAC_DEF_MED 0x3333
+#define MAC_DEF_LO 0x0100
+
+/*
+ ****************************************************************************
+ * Default I/O Signature - 0x33
+ ****************************************************************************
+ */
+#define LAN91C96_LOW_SIGNATURE (0x33U << 0)
+#define LAN91C96_HIGH_SIGNATURE (0x33U << 8)
+#define LAN91C96_SIGNATURE (LAN91C96_HIGH_SIGNATURE | LAN91C96_LOW_SIGNATURE)
+
+#define LAN91C96_MAX_PAGES 6 // Maximum number of 256 pages.
+#define ETHERNET_MAX_LENGTH 1514
+
+
+
+/*-------------------------------------------------------------------------
+ * I define some macros to make it easier to do somewhat common
+ * or slightly complicated, repeated tasks.
+ *-------------------------------------------------------------------------
+ */
+
+/* select a register bank, 0 to 3 */
+
+#define SMC_SELECT_BANK(x) { SMC_outw( x, LAN91C96_BANK_SELECT ); }
+
+/* this enables an interrupt in the interrupt mask register */
+#define SMC_ENABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = SMC_inb( LAN91C96_INT_MASK );\
+ mask |= (x);\
+ SMC_outb( mask, LAN91C96_INT_MASK ); \
+}
+
+/* this disables an interrupt from the interrupt mask register */
+
+#define SMC_DISABLE_INT(x) {\
+ unsigned char mask;\
+ SMC_SELECT_BANK(2);\
+ mask = SMC_inb( LAN91C96_INT_MASK );\
+ mask &= ~(x);\
+ SMC_outb( mask, LAN91C96_INT_MASK ); \
+}
+
+/*----------------------------------------------------------------------
+ * Define the interrupts that I want to receive from the card
+ *
+ * I want:
+ * LAN91C96_IST_EPH_INT, for nasty errors
+ * LAN91C96_IST_RCV_INT, for happy received packets
+ * LAN91C96_IST_RX_OVRN_INT, because I have to kick the receiver
+ *-------------------------------------------------------------------------
+ */
+#define SMC_INTERRUPT_MASK (LAN91C96_IST_EPH_INT | LAN91C96_IST_RX_OVRN_INT | LAN91C96_IST_RCV_INT)
+
+#endif /* _LAN91C96_H_ */
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 87282ac..ba55af1 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -53,6 +53,8 @@
/*
* Hardware drivers
*/
+#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96_BASE 0x0C000000
/*
* select serial console configuration
@@ -64,7 +66,7 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
diff --git a/lib_arm/board.c b/lib_arm/board.c
index a725c24..54f554b 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -42,6 +42,9 @@ const char version_string[] =
extern void cs8900_get_enetaddr (uchar * addr);
#endif
+#ifdef CONFIG_DRIVER_LAN91C96
+#include "../drivers/lan91c96.h"
+#endif
/*
* Begin and End of memory area for malloc(), and current "brk"
*/
@@ -275,6 +278,13 @@ void start_armboot (void)
cs8900_get_enetaddr (gd->bd->bi_enetaddr);
#endif
+#ifdef CONFIG_DRIVER_LAN91C96
+ if (getenv ("ethaddr")) {
+ smc_set_mac_addr(gd->bd->bi_enetaddr);
+ }
+ /* eth_hw_init(); */
+#endif /* CONFIG_DRIVER_LAN91C96 */
+
/* Initialize from environment */
if ((s = getenv ("loadaddr")) != NULL) {
load_addr = simple_strtoul (s, NULL, 16);
diff --git a/post/sysmon.c b/post/sysmon.c
index c8fcefc..f069caa 100644
--- a/post/sysmon.c
+++ b/post/sysmon.c
@@ -50,10 +50,10 @@
#include <watchdog.h>
#include <i2c.h>
-static int sysmon_temp_invalid = 0;
-
#if CONFIG_POST & CFG_POST_SYSMON
+static int sysmon_temp_invalid = 0;
+
/* #define DEBUG */
#define RELOC(x) if (x != NULL) x = (void *) ((ulong) (x) + gd->reloc_off)
diff --git a/post/uart.c b/post/uart.c
index 354c6c7..3eaafd8 100644
--- a/post/uart.c
+++ b/post/uart.c
@@ -73,7 +73,9 @@ static struct {
static char *ctlr_name[2] = { "SMC", "SCC" };
static int used_by_uart[2] = { -1, -1 };
+#if defined(SCC_ENET)
static int used_by_ether[2] = { -1, -1 };
+#endif
static int proff_smc[] = { PROFF_SMC1, PROFF_SMC2 };
static int proff_scc[] =