summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2005-06-27 13:30:03 +0000
committerwdenk <wdenk>2005-06-27 13:30:03 +0000
commit342717f72a2f92a14b9c823546e5bcec244f8bf4 (patch)
treed2aee74d8f384b6d85d4ce88c35df1303ffb927c
parent024447b186cca55c2d803ab96b4c8f8674363b86 (diff)
downloadu-boot-imx-342717f72a2f92a14b9c823546e5bcec244f8bf4.zip
u-boot-imx-342717f72a2f92a14b9c823546e5bcec244f8bf4.tar.gz
u-boot-imx-342717f72a2f92a14b9c823546e5bcec244f8bf4.tar.bz2
* Fix baudrate calculation problem on MPC5200 systems
* Add MPC8220 boards to MAKEALL script * Add EEPROM and RTC support for HMI1001 board * Patch by Detlev Zundel, 20 Jun 2005: Fix initialization of low active GPIO pins on inka4x0 board
-rw-r--r--CHANGELOG7
-rw-r--r--MAKEALL10
-rw-r--r--board/inka4x0/inka4x0.c7
-rw-r--r--common/cmd_usb.c2
-rw-r--r--cpu/mpc5xxx/serial.c4
-rw-r--r--include/configs/hmi1001.h33
6 files changed, 47 insertions, 16 deletions
diff --git a/CHANGELOG b/CHANGELOG
index cd2697a..371b2ff 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,13 @@
Changes for U-Boot 1.1.3:
======================================================================
+* Fix baudrate calculation problem on MPC5200 systems
+
+* Add EEPROM and RTC support for HMI1001 board
+
+* Patch by Detlev Zundel, 20 Jun 2005:
+ Fix initialization of low active GPIO pins on inka4x0 board
+
* Enable redundant environment, disable HW flash protection of
HMI1001 board
diff --git a/MAKEALL b/MAKEALL
index 69d7760..e9f9307 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -129,11 +129,11 @@ LIST_7xx=" \
BAB7xx CPCI750 ELPPC \
"
-LIST_ppc="${LIST_5xx} ${LIST_5xxx} \
- ${LIST_8xx} \
- ${LIST_824x} ${LIST_8260} \
- ${LIST_85xx} \
- ${LIST_4xx} \
+LIST_ppc="${LIST_5xx} ${LIST_5xxx} \
+ ${LIST_8xx} \
+ ${LIST_8220} ${LIST_824x} ${LIST_8260} \
+ ${LIST_85xx} \
+ ${LIST_4xx} \
${LIST_74xx} ${LIST_7xx}"
#########################################################################
diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c
index c17b8fe..29878f9 100644
--- a/board/inka4x0/inka4x0.c
+++ b/board/inka4x0/inka4x0.c
@@ -173,6 +173,7 @@ void flash_preinit(void)
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
+#define GPIO_WKUP_7 0x80000000UL
#define GPIO_PSC3_9 0x04000000UL
int misc_init_f (void)
@@ -189,13 +190,13 @@ int misc_init_f (void)
/* Initialize GPIO output pins.
*/
- /* Configure GPT as GPIO output */
+ /* Configure GPT as GPIO output (and set them as they control low-active LEDs */
*(vu_long *)MPC5XXX_GPT0_ENABLE =
*(vu_long *)MPC5XXX_GPT1_ENABLE =
*(vu_long *)MPC5XXX_GPT2_ENABLE =
*(vu_long *)MPC5XXX_GPT3_ENABLE =
*(vu_long *)MPC5XXX_GPT4_ENABLE =
- *(vu_long *)MPC5XXX_GPT5_ENABLE = 0x24;
+ *(vu_long *)MPC5XXX_GPT5_ENABLE = 0x34;
/* Configure GPT7 as PWM timer, 1kHz, no ints. */
*(vu_long *)MPC5XXX_GPT7_ENABLE = 0;/* Disable */
@@ -216,6 +217,8 @@ int misc_init_f (void)
*(vu_long *)MPC5XXX_WU_GPIO_ENABLE |= 0xc4000000;
*(vu_long *)MPC5XXX_WU_GPIO_DIR |= 0xc4000000;
+ /* Set LR mirror bit because it is low-active */
+ *(vu_long *)MPC5XXX_WU_GPIO_DATA |= GPIO_WKUP_7;
/*
* Reset Coral-P graphics controller
*/
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index fbddb12..4747592 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -609,7 +609,7 @@ U_BOOT_CMD(
"usb tree - show USB device tree\n"
"usb info [dev] - show available USB devices\n"
"usb scan - (re-)scan USB bus for storage devices\n"
- "usb device [dev] - show or set current USB storage device\n"
+ "usb dev [dev] - show or set current USB storage device\n"
"usb part [dev] - print partition table of one or all USB storage devices\n"
"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
" to memory address `addr'\n"
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index f463d2c..1e9628c 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -154,11 +154,11 @@ serial_setbrg(void)
#if defined(CONFIG_MGT5100)
baseclk = CFG_MPC5XXX_CLKIN / 32;
#elif defined(CONFIG_MPC5200)
- baseclk = gd->ipb_clk / 32;
+ baseclk = (gd->ipb_clk + 16) / 32;
#endif
/* set up UART divisor */
- div = baseclk / gd->baudrate;
+ div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
psc->ctur = div >> 8;
psc->ctlr = div & 0xff;
}
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index fc97b8d..4e44bde 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -56,7 +56,10 @@
* Supported commands
*/
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
CFG_CMD_NFS | \
CFG_CMD_SNTP)
@@ -102,6 +105,29 @@
#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR 0x58
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR 0x51
+
+/*
* Flash configuration
*/
#define CFG_FLASH_BASE 0xFF800000
@@ -165,7 +191,7 @@
#endif
#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_MALLOC_LEN (512 << 10) /* Reserve 128 kB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*
@@ -180,11 +206,6 @@
#define CFG_GPS_PORT_CONFIG 0x01051004
/*
- * RTC configuration
- */
-#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
-
-/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */