summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-06-06 21:51:03 +0000
committerwdenk <wdenk>2004-06-06 21:51:03 +0000
commit17ea11774332a7e8702effd357595ce4a56f89d5 (patch)
tree86afee791f723e978081eead05fda94692a43a32
parent1114257c9df3fa3db39ff55dd03d1f7cbc5c0603 (diff)
downloadu-boot-imx-17ea11774332a7e8702effd357595ce4a56f89d5.zip
u-boot-imx-17ea11774332a7e8702effd357595ce4a56f89d5.tar.gz
u-boot-imx-17ea11774332a7e8702effd357595ce4a56f89d5.tar.bz2
Patch by Tolunay Orkun, 20 Apr 2004:
- README update: add CONFIG_CSB272 and csb272_config - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and i2cfast environment variable
-rw-r--r--CHANGELOG5
-rw-r--r--README153
2 files changed, 101 insertions, 57 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 519e977..4402e4d 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,11 @@
Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Tolunay Orkun, 20 Apr 2004:
+ - README update: add CONFIG_CSB272 and csb272_config
+ - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
+ i2cfast environment variable
+
* Patch by Yuli Barcohen, 19 Apr 2004:
- Rename DUET_ADS to MPC885ADS
- Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
diff --git a/README b/README
index ddb58c3..95e552d 100644
--- a/README
+++ b/README
@@ -250,42 +250,43 @@ The following options need to be configured:
PowerPC based boards:
---------------------
- CONFIG_ADCIOP, CONFIG_ADS860, CONFIG_AMX860,
- CONFIG_AR405, CONFIG_BAB7xx, CONFIG_c2mon,
- CONFIG_CANBT, CONFIG_CCM, CONFIG_CMI,
- CONFIG_cogent_mpc8260, CONFIG_cogent_mpc8xx, CONFIG_CPCI405,
- CONFIG_CPCI4052, CONFIG_CPCIISER4, CONFIG_CPU86,
- CONFIG_CRAYL1, CONFIG_CU824, CONFIG_DASA_SIM,
- CONFIG_DB64360, CONFIG_DB64460, CONFIG_DU405,
- CONFIG_DUET_ADS, CONFIG_EBONY, CONFIG_ELPPC,
- CONFIG_ELPT860, CONFIG_ep8260, CONFIG_ERIC,
- CONFIG_ESTEEM192E, CONFIG_ETX094, CONFIG_EVB64260,
- CONFIG_FADS823, CONFIG_FADS850SAR, CONFIG_FADS860T,
- CONFIG_FLAGADM, CONFIG_FPS850L, CONFIG_FPS860L,
- CONFIG_GEN860T, CONFIG_GENIETV, CONFIG_GTH,
- CONFIG_gw8260, CONFIG_hermes, CONFIG_hymod,
- CONFIG_IAD210, CONFIG_ICU862, CONFIG_IP860,
- CONFIG_IPHASE4539, CONFIG_IVML24, CONFIG_IVML24_128,
- CONFIG_IVML24_256, CONFIG_IVMS8, CONFIG_IVMS8_128,
- CONFIG_IVMS8_256, CONFIG_JSE, CONFIG_LANTEC,
- CONFIG_lwmon, CONFIG_MBX, CONFIG_MBX860T,
- CONFIG_MHPC, CONFIG_MIP405, CONFIG_MOUSSE,
- CONFIG_MPC8260ADS, CONFIG_MPC8540ADS, CONFIG_MPC8560ADS,
- CONFIG_MUSENKI, CONFIG_MVS1, CONFIG_NETPHONE,
- CONFIG_NETTA, CONFIG_NETVIA, CONFIG_NX823,
- CONFIG_OCRTC, CONFIG_ORSG, CONFIG_OXC,
- CONFIG_PCI405, CONFIG_PCIPPC2, CONFIG_PCIPPC6,
- CONFIG_pcu_e, CONFIG_PIP405, CONFIG_PM826,
- CONFIG_ppmc8260, CONFIG_QS823, CONFIG_QS850,
- CONFIG_QS860T, CONFIG_RBC823, CONFIG_RPXClassic,
- CONFIG_RPXlite, CONFIG_RPXsuper, CONFIG_rsdproto,
- CONFIG_sacsng, CONFIG_Sandpoint8240, CONFIG_Sandpoint8245,
- CONFIG_sbc8260, CONFIG_SM850, CONFIG_SPD823TS,
- CONFIG_STXGP3, CONFIG_SXNI855T, CONFIG_TQM823L,
- CONFIG_TQM8260, CONFIG_TQM850L, CONFIG_TQM855L,
- CONFIG_TQM860L, CONFIG_TTTech, CONFIG_UTX8245,
- CONFIG_V37, CONFIG_W7OLMC, CONFIG_W7OLMG,
- CONFIG_WALNUT405, CONFIG_ZPC1900, CONFIG_ZUMA,
+ CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCI405
+ CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC2
+ CONFIG_AMX860 CONFIG_GTH CONFIG_PCIPPC6
+ CONFIG_AR405 CONFIG_gw8260 CONFIG_pcu_e
+ CONFIG_BAB7xx CONFIG_hermes CONFIG_PIP405
+ CONFIG_c2mon CONFIG_hymod CONFIG_PM826
+ CONFIG_CANBT CONFIG_IAD210 CONFIG_ppmc8260
+ CONFIG_CCM CONFIG_ICU862 CONFIG_QS823
+ CONFIG_CMI CONFIG_IP860 CONFIG_QS850
+ CONFIG_cogent_mpc8260 CONFIG_IPHASE4539 CONFIG_QS860T
+ CONFIG_cogent_mpc8xx CONFIG_IVML24 CONFIG_RBC823
+ CONFIG_CPCI405 CONFIG_IVML24_128 CONFIG_RPXClassic
+ CONFIG_CPCI4052 CONFIG_IVML24_256 CONFIG_RPXlite
+ CONFIG_CPCIISER4 CONFIG_IVMS8 CONFIG_RPXsuper
+ CONFIG_CPU86 CONFIG_IVMS8_128 CONFIG_rsdproto
+ CONFIG_CRAYL1 CONFIG_IVMS8_256 CONFIG_sacsng
+ CONFIG_CSB272 CONFIG_JSE CONFIG_Sandpoint8240
+ CONFIG_CU824 CONFIG_LANTEC CONFIG_Sandpoint8245
+ CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8260
+ CONFIG_DB64360 CONFIG_MBX CONFIG_SM850
+ CONFIG_DB64460 CONFIG_MBX860T CONFIG_SPD823TS
+ CONFIG_DU405 CONFIG_MHPC CONFIG_STXGP3
+ CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_SXNI855T
+ CONFIG_EBONY CONFIG_MOUSSE CONFIG_TQM823L
+ CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM8260
+ CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM850L
+ CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM855L
+ CONFIG_ERIC CONFIG_MUSENKI CONFIG_TQM860L
+ CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_TTTech
+ CONFIG_ETX094 CONFIG_NETPHONE CONFIG_UTX8245
+ CONFIG_EVB64260 CONFIG_NETTA CONFIG_V37
+ CONFIG_FADS823 CONFIG_NETVIA CONFIG_W7OLMC
+ CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMG
+ CONFIG_FADS860T CONFIG_OCRTC CONFIG_WALNUT405
+ CONFIG_FLAGADM CONFIG_ORSG CONFIG_ZPC1900
+ CONFIG_FPS850L CONFIG_OXC CONFIG_ZUMA
+ CONFIG_FPS860L
ARM based boards:
-----------------
@@ -895,6 +896,32 @@ The following options need to be configured:
the malloc area (as defined by CFG_MALLOC_LEN) should
be at least 4MB.
+- MII/PHY support:
+ CONFIG_PHY_ADDR
+
+ The address of PHY on MII bus.
+
+ CONFIG_PHY_CLOCK_FREQ (ppc4xx)
+
+ The clock frequency of the MII bus
+
+ CONFIG_PHY_GIGE
+
+ If this option is set, support for speed/duplex
+ detection of Gigabit PHY is included.
+
+ CONFIG_PHY_RESET_DELAY
+
+ Some PHY like Intel LXT971A need extra delay after
+ reset before any MII register access is possible.
+ For such PHY, set this option to the usec delay
+ required. (minimum 300usec for LXT971A)
+
+ CONFIG_PHY_CMD_DELAY (ppc4xx)
+
+ Some PHY like Intel LXT971A need extra delay after
+ command issued before MII status register can be read
+
- Ethernet address:
CONFIG_ETHADDR
CONFIG_ETH2ADDR
@@ -1129,6 +1156,12 @@ The following options need to be configured:
custom i2c_init_board() routine in boards/xxx/board.c
is run early in the boot sequence.
+ CONFIG_I2CFAST (PPC405GP|PPC405EP only)
+
+ This option enables configuration of bi_iic_fast[] flags
+ in u-boot bd_info structure based on u-boot environment
+ variable "i2cfast". (see also i2cfast)
+
- SPI Support: CONFIG_SPI
Enables SPI driver (so far only tested with
@@ -2020,27 +2053,27 @@ is done by typing:
where "NAME_config" is the name of one of the existing
configurations; the following names are supported:
- ADCIOP_config ADS860_config AR405_config
- at91rm9200dk_config CANBT_config cmi_mpc5xx_config
- cogent_common_config cogent_mpc8260_config cogent_mpc8xx_config
- CPCI405_config CPCIISER4_config CU824_config
- DUET_ADS_config EBONY_config ELPT860_config
- ESTEEM192E_config ETX094_config FADS823_config
- FADS850SAR_config FADS860T_config FPS850L_config
- FPS860L_config GEN860T_config GENIETV_config
- GTH_config hermes_config hymod_config
- IP860_config IVML24_config IVMS8_config
- JSE_config LANTEC_config lwmon_config
- MBX860T_config MBX_config MPC8260ADS_config
- MPC8540ADS_config MPC8560ADS_config NETVIA_config
- omap1510inn_config omap1610h2_config omap1610inn_config
- pcu_e_config PIP405_config QS823_config
- QS850_config QS860T_config RPXlite_config
- RPXsuper_config rsdproto_config Sandpoint8240_config
- sbc8260_config SM850_config SPD823TS_config
- stxgp3_config SXNI855T_config TQM823L_config
- TQM850L_config TQM855L_config TQM860L_config
- WALNUT405_config ZPC1900_config
+ ADCIOP_config FPS850L_config omap1610inn_config
+ ADS860_config FPS860L_config pcu_e_config
+ AR405_config GEN860T_config PIP405_config
+ at91rm9200dk_config GENIETV_config QS823_config
+ CANBT_config GTH_config QS850_config
+ cmi_mpc5xx_config hermes_config QS860T_config
+ cogent_common_config hymod_config RPXlite_config
+ cogent_mpc8260_config IP860_config RPXsuper_config
+ cogent_mpc8xx_config IVML24_config rsdproto_config
+ CPCI405_config IVMS8_config Sandpoint8240_config
+ CPCIISER4_config JSE_config sbc8260_config
+ csb272_config LANTEC_config SM850_config
+ CU824_config lwmon_config SPD823TS_config
+ DUET_ADS_config MBX860T_config stxgp3_config
+ EBONY_config MBX_config SXNI855T_config
+ ELPT860_config MPC8260ADS_config TQM823L_config
+ ESTEEM192E_config MPC8540ADS_config TQM850L_config
+ ETX094_config MPC8560ADS_config TQM855L_config
+ FADS823_config NETVIA_config TQM860L_config
+ FADS850SAR_config omap1510inn_config WALNUT405_config
+ FADS860T_config omap1610h2_config ZPC1900_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
@@ -2221,6 +2254,12 @@ Some configuration options can be set using Environment Variables:
This can be used to load and uncompress arbitrary
data.
+ i2cfast - (PPC405GP|PPC405EP only)
+ if set to 'y' configures Linux I2C driver for fast
+ mode (400kHZ). This environment variable is used in
+ initialization code. So, for changes to be effective
+ it must be saved and board must be reset.
+
initrd_high - restrict positioning of initrd images:
If this variable is not set, initrd images will be
copied to the highest possible address in RAM; this