summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPeter Korsgaard <peter.korsgaard@barco.com>2013-05-13 08:36:30 +0000
committerTom Rini <trini@ti.com>2013-06-07 14:17:01 -0400
commit12d7a474204a667a7f94e3904e5d4062e3115894 (patch)
treec9274049898a39589ada98b4e7a37638a993fc05
parent2b75b0ad3a2a47492a6d03199d85632f9ee3e42b (diff)
downloadu-boot-imx-12d7a474204a667a7f94e3904e5d4062e3115894.zip
u-boot-imx-12d7a474204a667a7f94e3904e5d4062e3115894.tar.gz
u-boot-imx-12d7a474204a667a7f94e3904e5d4062e3115894.tar.bz2
am335x: enable falcon boot mode for mmc (raw and fat) and nand
Jump into full u-boot mode if a 'c' character is received on the uart. We need to adjust the spl bss/malloc area to not overlap with the loadaddr of the kernel (sdram + 32k), so move it past u-boot instead. For raw mmc, we store the kernel parameter area in the free space after the MBR (if used). For nand, we use the last sector of the partition reserved for u-boot. This also enables the spl command in the full u-boot so the kernel parameter area snapshot can be created. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
-rw-r--r--board/ti/am335x/board.c9
-rw-r--r--include/configs/am335x_evm.h30
2 files changed, 36 insertions, 3 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index ebddf0c..73bf853 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -297,6 +297,15 @@ static struct emif_regs ddr3_evm_emif_reg_data = {
.emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY |
PHY_EN_DYN_PWRDN,
};
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ return (serial_tstc() && serial_getc() == 'c');
+}
+#endif
+
#endif
/*
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index cd2c078..737e19e 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -314,13 +314,36 @@
#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
-#define CONFIG_SPL_BSS_START_ADDR 0x80000000
+#define CONFIG_SPL_OS_BOOT
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80a00000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#ifdef CONFIG_SPL_OS_BOOT
+/* fat */
+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage"
+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args"
+#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_DRAM_1 + 0x100)
+
+/* raw mmc */
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x500 /* address 0xa0000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */
+
+/* nand */
+#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x1000
+
+/* spl export command */
+#define CONFIG_CMD_SPL
+#endif
+
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
@@ -378,7 +401,7 @@
* other needs.
*/
#define CONFIG_SYS_TEXT_BASE 0x80800000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80a08000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
/* Since SPL did pll and ddr initialization for us,
@@ -474,7 +497,8 @@
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
"128k(SPL.backup1)," \
"128k(SPL.backup2)," \
- "128k(SPL.backup3),1920k(u-boot)," \
+ "128k(SPL.backup3),1792k(u-boot)," \
+ "128k(u-boot-spl-os)," \
"128k(u-boot-env),5m(kernel),-(rootfs)"
#define CONFIG_NAND_OMAP_GPMC
#define GPMC_NAND_ECC_LP_x16_LAYOUT 1